0.20" (5.1 mm) 1.79" (45.4 mm) Feed-Through terminal block with 2 plug-in comb connections on one side.

Size: px

Start display at page:

Download "0.20" (5.1 mm) 1.79" (45.4 mm) Feed-Through terminal block with 2 plug-in comb connections on one side."

Gwenda Quinn
5 years ago
Views:

" (. mm)." (. mm) Two Circuit terminal block with plug-in comb connection on one side of each circuit.

1 Bulletin Screw Connection Terminal Blocks Plug-In Connection Blocks Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block. Specifications." ( mm) -JC." (. mm)." (. mm) Feed-Through terminal block with plug-in comb connections on one side.." (. mm) -JDC." (. mm)." (. mm) Two Circuit terminal block with plug-in comb connection on one side of each circuit. Certifications CSA IEC CSA IEC Voltage Rating V AC/DC V AC/DC V AC/DC V AC/DC Maximum Current A A A ( x ) A ( x ) A. A Wire Range (Rated Cross Section) # AWG # AWG. mm # AWG # AWG. mm Wire Strip Length. in. ( mm). in. ( mm) Recommended Tightening Torque. lb in (. N m).. lb in (.. N m) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range - + F (- + C) - + F (- + C) Short-Circuit Current Rating See page - Terminal Blocks Pkg Qty. Pkg Qty. Color: Grey -JC -JDC Socket Strips Pkg Qty. Pkg Qty. Color/Quantity Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Accessories Pkg Qty. Pkg Qty. Mounting Rails: m Symmetrical DIN (Steel) -DR -DR m Symmetrical DIN (Aluminum) -DR -DR m Hi-Rise Sym. DIN (Aluminum) -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR -DR Barrier Kit (Start/End) -BKJC -BKJDC End Anchors and Retainers: Screwless End Retainer -ERL -ERL DIN Rail Normal Duty -EAJ -EAJ DIN Rail Heavy Duty -EAHJ -EAHJ Jumpers: Screw Center Jumper -pole -CJJ- Screw Center Jumper -pole -CJJ- Screw Center Jumper -pole -CJJ- Screw Center Jumper pole -CJJ- Screw Type Jumper Notching Tool -T Other Accessories: Open Pin Cover -PCJC -PCJC Group Marking Carrier -GM -GM Marking Systems: Snap-in marker cards -MX (/card) -MX (/card) Individual Marker Tabs (Single Char.) -MX (/card) -MX (/card) One kit consists of start barriers and end barriers. Barriers are required on both ends. Preferred availability cat. nos. are bold. Publication A-CAA-EN-P -

2 Bulletin Screw Connection Terminal Blocks Short-Circuit Curr ent Ratings Fuse Ratings -J -JP -JDSS -JD -JDC -JGTW -JDGC -JG -JF -JTW -JC -JDC -JKD -JDFB -JDF -JDGFB -JDPSSTP -JDPTP -JDGP -JDGPSS -JDGPSSTP -JDGPTP -JDG -JDPSS -JDP -J -JG -JKD -JTW -JQ -JGTW -JGQ -JKDTW -JKDQ -JKDTP -JDC -JD -JKDQTP -JKDTWTP -JSD -JKD -JCTB -J -JG -J -JG -J -JG -JND -J -JG -J -JG -J -JG -J -JG Wire Range Cu [AWG] Overcurrent Protection Fuse Required Class/Max. Current Rating [A] Maximum Line Load J T RK RK G CC Voltage [V] SCCR, RMS SYM [A],,,,,,, / /, / /, /.../ /.../, / /, - Preferred availability cat. nos. are bold. Publication A-CAA-EN-P

3 Bulletin Screw Connection Terminal Blocks Short-Circuit Current Ratings Overcurrent Ratings Wire Range Cu [AWG] (Line and Load) Overcurrent Protection Device Required Max. Current [A] SCCR, RMS Sym A Y/V SCCR, RMS Sym. A V+ -JTW M-DE-,, -JC M-CE-B,, -JDC M-CE-B,, -JF M-CE-B,, -JDF M-CE-B,, -JKD M-CE-B, -JDFB M-CE-A,, -JDGFB M-CE-C, -JDPSSTP MCE-C, -JDPTP -JDGP -JDGPSS -JDGPSSTP -JDGPTP -JDG -JDP -JDPSS -JKD M-FE-,, -JSD M-DE-C,, -JCTB M-DE-C,, M-DE-C, M-DE-C, M-DE-B,, M-CE-B,, M-CE-B,, M-CE-B,, M-CE-B,, M-CE-B, M-CE-C, M-CE-C, M-CE-A,, -J -JG -J -JG -JND -J -JG -J -JG Wire Range Cu [AWG] (Line and Load) Overcurrent Protection Device Required Max. Current [A] SCCR, RMS Sym A V+ SCCR, RMS Sym. A Y V+ M-HP-,, M-HP-,, M-HP-,, / M-HP-,, Wire Range Cu [AWG] (Line and Load) Overcurrent Protection Device Required Max. Current [A] SCCR, RMS Sym A V+ SCCR, RMS Sym. A V+ -J / U-JX, / U-JX, -J / U-JX,, Bulletin M does not have ratings at this voltage. + Voltage terminal block was tested at for respective SCCR - Preferred availability cat. nos. are bold. Publication A-CAA-EN-P

4 Bulletin IEC Terminal Block Accessories General Accessories Photo Description For Use With Pkg Qty. Jumper Notching Tool -CJ -T Unused Pin Cover on Connection Blocks Disconnect Plug Plug-In Component Plug Fuse Plug without Blown Fuse Indication Fuse Plug V Blown Fuse Indication Fuse Plug V Blown Fuse Indication Fuse Plug V Blown Fuse Indication Fuse Plug V Blown Fuse Indication -JC, JDC -PCJC -LP, JP, JDP, JDGP, LDR -LP, JP, JDP, JDGP, LDR -LP, JP, JDP, JDGP, LDR -DPL -CPL -FPK -FPK -FPK -FPK -FPK Mini-Block Jumper Insertion Tool -LM -TAL- DIN Rail Adapter Plate for LMP Mini-Blocks -LMP -MFLM -J -JA -J -JA Auxiliary Circuit Tap -J -JA Terminal Block screwdriver with hardened mm diameter blade (Handle made from recycled material) Wire cutting tool designed to attach directly to the shaft of the -N screwdriver Used to trim poles from center jumpers and side jumpers. Used to install -SJLM- in mini blocks. Use x mm fuses and are rated for AC and DC. All mm wide terminal blocks -N -N -KWC - Preferred availability cat. nos. are bold. Publication A-CAA-EN-P

Bulletin IEC Terminal Block Accessories General Accessories Plug-In and Sensor Connection Blocks Plug-In Connection Blocks Photo Wire Range # AWG (.

5 Bulletin IEC Terminal Block Accessories General Accessories Plug-In and Sensor Connection Blocks Plug-In Connection Blocks Photo Wire Range # AWG (. mm) For Use With -JC, JDC, LC, LDC Tightening Torque:.. lb in. (.. N m) Pkg Qty. -QP- -QP- -QP- -QP- -QP- -QP- -QP- -QP- -QP- -QP- -QP- DIN Rail Receptacle Convenient A or A power source designed to be installed in panels that will be used in North America and other locations that use the NEMA - socket (V, / Hz). Photo Device Rating Standard Duplex Pkg Qty. A -REC A -REC Ground Fault Circuit Interrupter (GFCI) A -RECG A -RECG Sensor Connection Blocks Photo Wire Range For Use With Color # AWG (. mm) -LS-, LS-L, LSG-, LS-, LS- L, LSG- Pkg. Qty. Brown -LS-BR Blue -LS-B Green -LSG Plug-In Connectors and Accessories for Flexible Configuration Blocks Photo Description Color Pkg. Qty. Individual Plug-in Connectors Standard Grey -STP Grounded Green -STP-G Ganged Connectors Start plug Grey -SBSTP Middle plug Grey -GSTP End plug Grey -EBSTP Electrical Ratings Standard Duplex Ground Fault Circuit Interrupter (GFCI) Certifications UL A, NEMA WD-, NEMA -R UL UL, UL A Amp V Device Rating A Amp V Operating Frequency / Hz Dielectric Voltage Withstands V per UL Withstands V per UL Short-Circuit Current Rating ka ka Environmental Ratings Operating Temperature Range + F ( + C) Storage Temperature Range + F ( + C) Mechanical Ratings Terminal Wire Sizes # # AWG solid or stranded Terminal Torque lb in. (. N m) Markers -MSX Accessories Plug-in block locking element Yellow -STPLE Coding Element for keyed configuration Yellow -STPCE Strain Relief covering w plug-in blocks Yellow -STPSR Preferred availability cat. nos. are bold. Publication A-CAA-EN-P -

6 Bulletin IEC Terminal Block Accessories Specifications Maximum number of multiple wire connections for copper conductors of the same cross-section and type for Allen-Bradley IEC Terminal Blocks. Cat. Nos. -J and L products are all recommended for one conductor per terminal. Wire range is defined in the cat. page for each of the products. In general, accessories for terminal blocks are not eligible for recognition by UL, CSA, or other third party approval agencies. The suitability of the installation must be judged in the end use application due to the wide variety of possible uses. However, accessories are designed to meet, and are tested to, the terminal block assembly requirements such as electrical spacings, etc. Wire Size [AWG] # # # # # # # # # # # # # # # # / / / Number of the Same Size Wires Per Terminal -CA -CAM -H -H -H -H -HM -J -J -JQ -J -J -JF -JP -JTW (single side) -JTW (twin side) -J -JCTB -JQ -JTW -J -J -J -JC -JD -JDDF -JDDR -JDF -JDFB -JDPSS -JDPSSTP -JDPTP -JDRB*** -JDRC -JDSS -JD -JDC -JDC -JDG -JDGFB -JDGP -JDGPSS -JDGPSSTP -JDGPTP -JDG Preferred availability cat. nos. are bold. Publication A-CAA-EN-P -

2.63" (65.9 mm) 0.20" (5.1 mm)

2.63 (65.9 mm) 0.20 (5.1 mm) Bulletin Screw Connection Terminal Blocks Double-Level Plug-In Style Terminal Blocks Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail