Bulletin 1492 IEC Terminal Block Accessories Marking Systems

Transcription

1 Bulletin IEC Terminal Block Accessories Marking Systems Marking Solutions Marking Solutions from Rockwell Automation enable efficient identification of terminal blocks and other components. The Allen-Bradley ClearMark Printer provides quality printing for highvolume users. The X-Y Plotter allows for flexible marking. Lowvolume marking needs are supported by pre-printed and custom markers. ClearMark Printer and Accessories The ClearMark Printer provides quality printing in an easy-to-use format for high-volume marking needs. Used with Allen-Bradley ClearTools software, customers can create markers with basic numbering to sequences and images. X-Y Plotter and Accessories The flexible marking tool of the Allen-Bradley terminal block product line is the X-Y Plotter. Fast: Less than two minutes to print and set a full card Easy: Integrated feeder for up to marker cards Low-maintenance: Will automatically cycle as needed to keep ink flowing Quality printing: or dpi Color printing: Use spot color printing on white marker cards for visual distinction System Requirements Operating system: Microsoft Windows, XP or Vista Memory: MB RAM Hard drive: MB available space Processor: Pentium III or comparable Graphics: x pixels with colors (ideal x with - bit high color) Description ClearMark Printer, V Includes ClearMark Printer, ClearTools -PRINT Software and first set of ink Accessories ClearMark Printer Ink Cartridge, Cyan -PRINTINK-C ClearMark Printer Ink Cartridge, Magenta -PRINTINK-M ClearMark Printer Ink Cartridge, Yellow -PRINTINK-Y ClearMark Printer Ink Cartridge, Black -PRINTINK-K ClearMark Printer - Replacement Ink Collector Unit -PRINTCOLLECT Plot partial marker cards Load up to five cards at a time (mix and match) Easy to use AB-Plot software System Requirements Operating system: Microsoft Windows Hard drive: MB available space Processor: Parallel or USB communication port Description Plotter Kit Includes Series E Plotter, - PLOTPEN ink pen, -PLOTPLT plate, communication cables, user manuals, ABPLOT software, and power adaptor. Plotter Pen Disposable pen,. mm tip Plotter Pen Disposable pen,. mm tip Plotter Pen Disposable pen,. mm tip, slow-drying ink ABPLOT Plotter software CD ROM - also available online at Plotter Ink Cartridge Requires -PLPEN Refillable pen Requires -PLINKCART Pen Adaptor Adaptor for ultra fine Sharpie pens, includes pen Cleaning Solution Used to unclog -PLPEN, requires -PLCLEAN Cleaning Kit Container and cloth to unclog - PLPEN, requires -PLSOLN Service Kit Inserts and cleaning pads to replace in pen station Series E Adapter Plate (additional) plate is already included with the Plotter kit Adaptor Plate For oversized markers (-MW-, - MW-, and MW-) -PLTKIT -PLOTPEN -PLOTPEN -PLOTPENS -PLOTSOFT -PLINKCART -PLPEN -PLOTADPT -PLSOLN -PLCLEAN -PLOTSERV -PLOTPLT -PLOTPLTA - Publication A-CAA-EN-P

2 Blank Markers Photo Snap-In Individual Markers -M Snap-In Linked Markers -MR Snap-In Hinged Markers Cable Markers -MW Requires cable ties. Requires -GMC Requires -PLOTPLTA For Use With Bulletin IEC Terminal Block Accessories Markers per Card Marker Size Marking Systems -L x mm -MX -L x mm -MX -J, L -J, L x mm -MX x mm -MX x mm -MX x mm -MX x mm -MX x mm -MX x mm -MX x mm -MX -J, L, ArmorPoint x mm -MX -J, L NEMA (-HM, -HM, -HM) Terminal Blocks, -CB Circuit Breakers NEMA (-HM) Terminal Blocks, -CB Circuit Breakers -W,R, -HA Relays x mm -MX x mm -MX x mm -MN x mm -MN x mm -MSX x mm -MSX -HN, -HN, Relay Sockets x mm -MSX PanelConnect x mm -MSX -C, -D Contactors, -CF Relays, Circuit Breakers, -E, -E -J, -L x mm -MSX x mm -MRX x mm -MRX x mm -MRX x mm -MRX x mm -MRX -WM, -WMD x mm -MSX -W, -HA, F Contact Block x mm -MSX -W, -H Relays x mm -MSX -W, -R, -H Relays x mm -MSX -W, -H Relays x mm -MSX -L External Diameter (mm) x mm -MHX x mm -MHX x mm -MHX Markers per Card Marker Size. from. in. (from. mm) x mm -MWX from. in. (from. mm) x mm from. in. (from. mm) x mm from. in. (from. mm) x mm - MWX - MWX - MWX.. in. (. mm) x mm -MW-.. (.) in. (.. [.] mm) x mm -MW-.. (.) in. (.. [.] mm) x mm -MW- Preferred availability cat. nos. are bold. Publication A-CAA-EN-P -

3 Bulletin IEC Terminal Block Accessories Marking Systems Blank Markers, Continued Photo Self-Adhesive Markers -MAS Wire Markers -MWC For Use With Markers per Card Marker Size Self-adhesive for any equipment x mm -MASX Bul. No. relays, self-adhesive for any equipment x mm -MASX -PICO GFX- Cont., self-adhesive for any equipment x mm -MASX.. in. (.. mm)/white. x mm -MWC-.. in. (.. mm)/white. x mm -MWC-.. in. (.. mm)/white x mm -MWC-.. in. (.. mm)/white. x mm -MWC-.. in. (.. mm)/white. x mm -MWC- Snap-In Individual Markers for Rockwell Automation products and Competitive Terminal BLocks -MC.. in. (.. mm)/white x mm -MWC- Wago x mm -MCWX Phoenix, Entrlec, Telemacanique, Legrand x mm -MCX Wieland and Telemecanique x mm -MCX Wago x mm -MCWXF Wago x mm -MCWX Wago x mm -MCWX Phoenix x mm -MCX Bul. No. -FB fuse holder and Phoenix x mm -MCX Bul. No. -FB fuse holder and Phoenix x mm -MCX Bul. No. -HL relays, and Phoenix, Wieland, Entrelec, Telemacanique, Legrand x mm -MCX Phoenix and Entrelec x mm -MCX Phoenix x mm -MCX Phoenix x mm -MCX Siemens x mm -MCSX Siemens x mm -MCSX Siemens x mm -MCSX Siemens x mm -MCSX Siemens x mm -MCSX Siemens x mm -MCSX - Preferred availability cat. nos. are bold. Publication A-CAA-EN-P

4 Bulletin IEC Terminal Block Accessories Marking Systems Pre-Printed Markers Pre-printed markers are packaged in quantities of with a minimum order quantity of cards. Catalog Number Explanation Code H V HU VU HR VR HUR VUR C a Marker Selection Code Mx MSX MCSX Mx MSX MCX Mx MSX MCW- Mx MSX MCW- Mx MSX MCW- Mx MSX MASX Mx MSX MASX MX MCX MASX Mx MCX MWX Mx MCX MWX Mx MCWX MWX Mx MCWX MWX Mx MCWXF MW- MRX MCWX MW- MRX MCWX MW- MRX MCX MWC- MRX MCX MWC- MRx MCX MWC- MHX MCX MWC-B MHX MCX MWC-R MHX MCX MCW-Y MMN MCSX MWC-B MN MCSX MWC-R MSx MCSX MWC-Y MSx MCSX MWC-B MSX MCSX MWC-R b Text Direction Description Horizontal Print Vertical Print Mx H - MWC-Y Horizontal Upside-down Print Vertical Upside-down Print Horizontal Print, reversed data for each column Vertical Print, reversed data for each column Horizontal Upside-down Print, reversed data for each column Vertical Upside-down Print, reversed data for each column Custom a b c -End L L L L U V W PE GND - -or- - -or- - -or- -or or- - -or- - -or- -or or- - -or- - -or- -or or- - -or- -or- - c Printing Selection Straight Fill Printing Option -End will start at and continue printing sequential numbers until the end of the card is reached. Sequential printing to end of card Continuous printing "L" on card Continuous printing "L" on card Continuous printing "L" on card Continuous printing "L" on card Continuous printing "U" on card Continuous printing "V" on card Continuous printing "W" on card Continuous printing "PE" on card Continuous printing "GND" on card Repeat Sequence Printing All Options in this section will print the defined sequence in a repeating fashion until all tags are filled. (Example - Option - with a marker selection of Mx will print - and -.) Block of sequential numbering. Blocks of within a range from. Block of sequential numbering. Blocks of within a range from. Block of sequential numbering. Blocks of within a range from. Block of sequential numbering. Blocks of within a range from. Single Sequence Printing All options in this section will print the defined sequence time only and will leave the rest of the marker tags blank. (Example - Option -S with a marker selection of Mx will print - and leave blank markers). -S -or- -S -or- -S - or- -or- -S -S -or- -S -or- -or- -S -S -or- -S -or- -or- -S -S -or- -S -or- -or- -S Block of sequential numbering. Blocks of within a range from. Block of sequential numbering. Blocks of within a range from. Block of sequential numbering. Blocks of within a range from. Block of sequential numbering. Blocks of within a range from. Publication A-CAA-EN-P -

5 Bulletin IEC Terminal Block Accessories Marking Systems Custom Printed Marker Cards. Download the AB-Print software (AB-Print) from the Allen-Bradley terminal block home page ( and install it.. Create your custom marker card using the AB-Print software and save your file.. Place the custom order by adding the letter C to the end of the marker cat. no. (Example: If the custom marker that was created in Step is Cat. No. -MX, an order will be placed with the new - MXC.) Then, document the order number for Step.. the custom marker file to RAMilwCustomMarkers@ra.rockwell.com. Include the following items: Allen Bradley order number (in the subject of the ) Created file (attached to the ) Quantity (the number of needed copies of the file) Company information (with a contact name and number in the ) Note: Minimum quantity is card per order. Description End anchor top marker carrier -GMC Electrical Warning Plate Markers Photo For Use With Color -J Yellow -EWPJ -J Yellow -EWPJ -J Yellow -EWPJ -J Yellow -EWPJ -L Yellow -EWPL -L Yellow -EWPL -L Yellow -EWPL -L Yellow -EWPL -L Yellow -EWPL -L Yellow -EWPL -L Yellow -EWPL -W Yellow -EWP -W Yellow -EWP- -W Yellow -EWP -W Yellow -EWP- -W Yellow -EWP -W Yellow -EWP- -W Yellow -EWP -W Yellow -EWP- -W Yellow -EWP -W Yellow -EWP- - Publication A-CAA-EN-P

6 Bulletin Screw Connection Terminal Blocks Standard Feed-Through Blocks Dimensions are not intended to be used for manufacturing purposes.." (. mm) -J -J -J." ( mm)." (. mm)." (. mm)." ( mm)." (. mm)." (. mm)." ( mm) Specifications Feed-through terminal block Feed-through terminal block Feed-through terminal block Certifications CSA IEC ATEX CSA IEC ATEX CSA IEC ATEX Voltage Rating V V V V V V V V V Maximum Current A A A A A A A A A A A Wire Range (Rated Cross Section). mm mm mm # #. mm # # (# mm (# # mm (# ) ) ) Wire Strip Length. in. ( mm). in. ( mm). in. ( mm) Recommended Tightening Torque.. lb in (.. N m). lb in (. N m). lb in (. N m) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range - + F (- + C) - + F (- + C) - + F (- + C) Short-Circuit Current Rating See page - Terminal Blocks Color: Grey -J -J -J Red -J-RE -J-RE -J-RE Blue -J-B -J-B -J-B Black -J-BL -J-BL -J-BL Green -J-G -J-G -J-G Yellow -J-Y -J-Y -J-Y Orange -J-OR -J-OR -J-OR Brown -J-BR -J-BR -J-BR White -J-W -J-W -J-W Violet -J-V -J-V Mounting Rails: m Symmetrical DIN (Steel) -DR -DR -DR m Symmetrical DIN (Aluminum) -DR -DR -DR m Hi-Rise Sym. DIN (Aluminum) -DR -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR -DR -DR End Barriers Grey -EBJ -EBJ -EBJ Blue -EBJ-B -EBJ-B -EBJ-B Yellow -EBJ-Y -EBJ-Y -EBJ-Y End Anchors and Retainers: DIN Rail Normal Duty -EAJ -EAJ -EAJ DIN Rail Heavy Duty -EAHJ -EAHJ -EAHJ Screwless End Retainer -ERL -ERL -ERL Jumpers: Screw Center Jumper -pole -CJJ- -CJJ- -CJJ- Screw Center Jumper -pole -CJJ- -CJJ- -CJJ- Screw Center Jumper -pole -CJJ- -CJJ- -CJJ- Screw Center Jumper -pole -CJJ- -CJJ- -CJJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- (-pole) Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Insulated Side Jumper -Pole -SJB- Insulated Side Jumper -Pole -SJB- Screw Type Jumper Notching Tool -T -T -T Other Accessories: Partition Plate -EBJ -EBJ -EBJ Test Plug Socket -TPS -TPSL -TPSL Test Plug -TP -TP -TP Test Plug (Stackable) -TPJ -TPJ Electrical Warning Plate -EWPJ -EWPJ -EWPJ Marking Systems: Snap-in Marker Cards." (. mm) -MX (/card) -MX (/card) -MRX (/card) -MX (/card) -MX (/card) -MX (/card) Use of center jumpers may affect spacings, requiring derating of terminal blocks. See page - for details. - Publication A-CAA-EN-P

7 Bulletin Screw Connection Terminal Blocks Grounding Blocks Dimensions are not intended to be used for manufacturing purposes.." (. mm) -JG." (. mm) -JG." ( mm)." ( mm)." ( mm) Specifications Feed-through grounding terminal block Feed-through grounding terminal block Certifications CSA IEC ATEX CSA IEC ATEX Voltage Rating Maximum Current Grounding Grounding Wire Range (Rated Cross Section) # mm mm (# ) # mm Wire Strip Length. in. ( mm). in. ( mm) Recommended Tightening Torque. lb in (. N m). lb in (. N m) Mounting Torque Center Screw.. lb in (.. N m).. lb in (.. N m) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range - + F (- + C) - + F (- + C) Short-Circuit Current Rating See page -." (. mm) mm (# ) Terminal Blocks Color: Green/Yellow -JG -JG Accessories Mounting Rails: m Symmetrical DIN (Steel) -DR -DR m Symmetrical DIN (Aluminum) -DR -DR m Hi-Rise Sym. DIN (Aluminum) -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR -DR End Anchors and End Retainers: Screwless End Retainer -ERL -ERL DIN Rail Normal Duty -EAJ -EAJ DIN Rail Heavy Duty -EAHJ -EAHJ Marking Systems: Snap-in marker cards -MRX (/card) -MX (/card) Snap-in marker cards -MX (/card) -MX (/card) - Publication A-CAA-EN-P

8 Bulletin Screw Connection Terminal Blocks Grounding Blocks Dimensions are not intended to be used for manufacturing purposes.." ( mm) -JG -JG -JG." ( mm)." ( mm)." ( mm)." (. mm)." (. mm)." ( mm)." ( mm)." (. mm) Specifications Feed-through grounding terminal block Feed-through grounding terminal block Feed-through grounding terminal block Certifications CSA IEC ATEX CSA IEC ATEX CSA IEC ATEX Voltage Rating Maximum Current Grounding Grounding Grounding Wire Range (Rated Cross Section) # mm mm (# ) # # mm mm (# ) # / # / mm mm ( / ) Wire Strip Length. in. ( mm). in. ( mm). in. ( mm) Recommended Tightening Torque. lb in (. N m). lb in (. N m). lb in (. N m) Mounting Torque Center Screw.. lb in (.. N m).. lb in (.. N m).. lb in (.. N m) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range - + F (- + C) - + F (- + C) - + F (- + C) Short-Circuit Current Rating See page - Terminal Blocks Color: Green/Yellow -JG -JG -JG Accessories Mounting Rails: m Symmetrical DIN (Steel) m Symmetrical Heavy Duty DIN (Steel, Unslotted) -DR -DR -DR -DR m Symmetrical DIN (Aluminum) -DR -DR m Hi-Rise Sym. DIN (Aluminum) -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR m Symmetrical Heavy Duty DIN (Copper, Unslotted) -DR -DR -DR m Symmetrical Heavy Duty DIN (Steel) -DR -DR -DR End Barrier Not Required Not Required Not Required End Anchors: DIN Rail Heavy Duty -EAHJ -EAHJ -EAHJ Marking Systems: Snap-in marker cards -MX (/card) -MX (/card) -MX (/card) Snap-in marker cards -MX (/card) -MX (/card) -MX (/card) Publication A-CAA-EN-P -

9 Bulletin Screw Connection Terminal Blocks Grounding Blocks Dimensions are not intended to be used for manufacturing purposes.." (. mm) -JG -JG -JDG." (. mm). ( mm)." ( mm)." ( mm). ( mm) Specifications Feed-through grounding terminal block Feed-through grounding terminal Two-circuit terminal block with one block feed-through and one grounding circuit Certifications CSA IEC ATEX CSA IEC CSA IEC ATEX Voltage Rating. ( mm)." (. mm) V V Maximum Current Grounding A A A Wire Range (Rated Cross Section) # / mm mm (# / ) # / # /... mm #. mm Wire Strip Length. in. ( mm). in. ( mm). in. ( mm) Recommended Tightening Torque. lb in (. N m). lb in ( N m).. lb in. (.. N m) Mounting Torque Center Screw.. lb in (.. N m) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range - + F (- + C) - + F (- + C) - + F (- + C) Short-Circuit Current Rating See page -." (. mm) V. mm (# ) Terminal Blocks Color: Green/Yellow -JG -JG Grey -JDG Accessories Mounting Rails: m Symmetrical DIN (Steel) -DR m Symmetrical DIN (Aluminum) -DR m Hi-Rise Sym. DIN (Aluminum) -DR m Angled Hi-Rise Sym. DIN (Steel) -DR Screw Type m Symmetrical Heavy Duty DIN (Copper, Unslotted) -DR -DR End Barrier Grey Not Required -EBJD Yellow Not Required -EBJD-Y Jumpers: Screw Center Jumper -pole -CJJ- Screw Center Jumper -pole -CJJ- Screw Center Jumper -pole -CJJ- Screw Center Jumper -pole -CJJ- Insulated Side Jumper -Pole -SJA- Insulated Side Jumper -Pole -SJA- End Anchors and Retainers: Screwless End Retainer -ERL DIN Rail Normal Duty -EAJ DIN Rail Heavy Duty -EAHJ -EAHJ -EAHJ Marking Systems: Snap-in marker cards -MX (/card) -MRX (/card) -MX (/card) Snap-in marker cards -MX (/card) -MX (/card) -MX (/card) - Publication A-CAA-EN-P

10 Bulletin Spring-Clamp Connection Terminal Blocks Standard Feed-Through Blocks Dimensions are not intended to be used for manufacturing purposes.." ( mm) -L -LT -L." (. mm)." ( mm)." ( mm)." (. mm) Specifications Feed-through terminal block Feed-through terminal block with connection points on one side Feed-through terminal block Certifications CSA IEC ATEX CSA IEC ATEX CSA IEC ATEX Voltage Rating V V V." ( mm) V V." (. mm) V." (. mm) V V." (. mm) V Maximum Current A A A A A A A A A A Wire Range (Rated Cross Section) mm mm mm # # mm # # ( mm (# # mm ( ) ) ) Wire Strip Length. in. ( mm). in. ( mm). in. ( mm) Density pcs/ft ( pcs/m) pcs/ft( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range - + F (- + C) - + F (- + C) - + F (- + C) Short-Circuit Current Rating See page - Terminal Blocks Color Grey -L -LT -L Red -L-RE -LT-RE -L-RE Blue -L-B -LT-B -L-B Black -L-BL -LT-BL -L-BL Green -L-G -LT-G -L-G Yellow -L-Y -LT-Y -L-Y Orange -L-OR -LT-OR -L-OR Brown -L-BR -LT-BR -L-BR White -L-W -LT-W -L-W Accessories Mounting Rails m Symmetrical DIN (Steel) -DR -DR -DR m Symmetrical DIN (Aluminum) -DR -DR -DR m Hi-Rise Sym. DIN (Aluminum) -DR -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR -DR -DR End Barriers Grey -EBL -EBLT -EBL Blue -EBL-B -EBLT-B -EBL-B Yellow -EBL-Y -EBLT-Y -EBL-Y End Anchors and Retainers Screwless End Retainer -ERL -ERL -ERL DIN Rail Normal Duty -EAJ -EAJ -EAJ DIN Rail Heavy Duty -EAHJ -EAHJ -EAHJ Jumpers Plug-in Center Jumper -Pole -CJL- -CJL- Plug-in Center Jumper -Pole -CJL- -CJL- Plug-in Center Jumper -Pole -CJL- -CJL- Plug-in Center Jumper -Pole -CJL- -CJL- -CJL- Other Accessories Test Plug -TP Test Plug (Stackable) -TPL -TPL Electrical Warning Plate -EWPL -EWPL -EWPL Marking Systems Snap-In Marker Cards -MX (/card) -MX (/card) -MX (/card) Snap-In Marker Cards -MRX (/card) -MX (/card) -MX (/card) Hinged Marker Cards -MHX (/card) -MHX (/card) -MHX (/card) May only be mounted in terminal block corner marking positions. Publication A-CAA-EN-P -

11 Bulletin Spring-Clamp Connection Terminal Blocks Standard Feed-Through Blocks Dimensions are not intended to be used for manufacturing purposes.." (. mm) -L -LD -L." (. mm)." (. mm)." (. mm)." (. mm)." (. mm) Specifications Feed-through terminal block Power distribution block with center jumper connection/feed Feed-through terminal block Certifications CSA IEC ATEX CSA IEC CSA IEC ATEX Voltage Rating V V V." (. mm)." (. mm) V V V V Maximum Current A A A A A A A A Wire Range (Rated Cross Section) # mm mm ( ) # mm # mm Wire Strip Length. in. ( mm). in. ( mm). in. ( mm) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range - + F (- + C) - + F (- + C) - + F (- + C) Short-Circuit Current Rating See page -." (. mm) V Terminal Blocks Color Grey -L -LD -L Red -L-RE -L-RE Blue -L-B -L-B Black -L-BL -L-BL Green -L-G -L-G Yellow -L-Y -L-Y Orange -L-OR -L-OR Brown -L-BR -L-BR White -L-W -L-W Accessories Mounting Rails m Symmetrical DIN (Steel) -DR -DR -DR m Symmetrical Heavy Duty DIN (Steel, Unslotted) -DR -DR -DR m Symmetrical DIN (Aluminum) -DR -DR -DR m Hi-Rise Symmetrical DIN (Aluminum) -DR -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR -DR -DR m Symmetrical Heavy Duty DIN (Copper, Unslotted) -DR -DR -DR m Symmetrical Heavy Duty DIN (Steel Slotted) -DR -DR -DR End Barriers Grey -EBL Integrated to Block Integrated to Block Blue -EBL-B Yellow -EBL-Y End Anchors and Retainers Screwless End Retainer -ERL -ERL -ERL DIN Rail Normal Duty -EAJ -EAJ -EAJ DIN Rail Heavy Duty -EAHJ -EAHJ -EAHJ Jumpers Plug-in Center Jumper -Pole -CJL- -CJL- Other Accessories Test Plug -TP -TP -TP Test Adapter Electrical Warning Plate -EWPL -EWPL -EWPL Marking Systems Snap-In Marker Cards -MX (/card) -MX (/card) -MX (/card) Snap-In Marker Cards -MX (/card) -MX (/card) -MX (/card) Hinged Marker Cards -MHX (/card) -MHX (/card) -MHX (/card) Can be electrically connected through center jumper for power distribution to - L, LQ, L, LT, LQ, L, and LT terminal blocks. See page - for distribution guidelines. Use defined center jumper for standard terminal blocks when connecting for power distribution. May only be mounted in terminal block corner marking positions. mm - Publication A-CAA-EN-P

12 Bulletin Spring-Clamp Connection Terminal Blocks Grounding Blocks Dimensions are not intended to be used for manufacturing purposes. Specifications." ( mm) -LG -LGT -LG." (. mm)." ( mm) Feed-through grounding terminal block." ( mm)." ( mm)." (. mm) Feed-through grounding terminal block with points on one side." (. mm)." (. mm)." (. mm) Feed-through grounding terminal block Certifications CSA IEC ATEX CSA IEC ATEX CSA IEC ATEX Voltage Rating Maximum Current Grounding Grounding Grounding Wire Range (Rated Cross Section) # # mm mm ( ) # # mm mm ( ) # Wire Strip Length. in. ( mm). in. ( mm). in. ( mm) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range - + F (- + C) - + F (- + C) - + F (- + C) mm mm ( ) Terminal Blocks Color: Green/Yellow -LG -LGT -LG Accessories Mounting Rails: m Symmetrical DIN (Steel) -DR -DR -DR m Symmetrical DIN (Aluminum) -DR -DR -DR m Hi-Rise Symmetrical DIN (Aluminum) -DR -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR -DR -DR End Barrier Yellow -EBL-Y -EBLT-Y -EBL-Y End Anchors and Retainers Screwless End Retainer -ERL -ERL -ERL DIN Rail Normal Duty -EAJ -EAJ -EAJ DIN Rail Heavy Duty -EAHJ -EAHJ -EAHJ Other Accessories: Test Plug -TPL -TPL -TP Marking Systems: Snap-In Marker Cards -MRX (/card) -MX (/card) -MX (/card) Snap-In Marker Cards -MX (/card) -MX (/card) -MX (/card) Hinged Marker Cards -MHX (/card) -MHX (/card) -MHX (/card) May only be mounted in terminal block corner marking positions. - Publication A-CAA-EN-P

13 Bulletin Spring-Clamp Connection Terminal Blocks Grounding Blocks Dimensions are not intended to be used for manufacturing purposes.." (. mm) -LG -LG -LDG." (. mm)." (. mm)." (. mm)." (. mm)." (. mm)." ( mm) Two-circuit terminal block with Specifications Feed-through grounding terminal block Feed-through grounding terminal block feed-through and ground circuit Certifications CSA IEC ATEX CSA IEC ATEX CSA IEC Voltage Rating V Maximum Current Grounding Grounding A. A Wire Range (Rated Cross Section) # # mm mm ( ) # mm mm (# ) #. (. mm V. mm Wire Strip Length. in. ( mm). in. ( mm). in. ( mm) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range - + F (- + C) - + F (- + C) + F ( + C) Terminal Blocks Color: Green/Yellow -LG -LG Grey -LDG Accessories Mounting Rails: m Symmetrical DIN (Steel) -DR -DR -DR m Symmetrical Heavy Duty DIN (Steel, Unslotted) -DR -DR -DR m Symmetrical DIN (Aluminum) -DR -DR -DR m Hi-Rise Symmetrical DIN (Aluminum) -DR -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR -DR -DR m Symmetrical Heavy Duty DIN (Copper, Unslotted) -DR -DR -DR m Symmetrical Heavy Duty DIN (Steel) -DR -DR -DR End Barrier Yellow -EBL-Y Integrated Grey -EBLD End Anchors and Retainers Screwless End Retainer -ERL -ERL -ERL DIN Rail Normal Duty -EAJ -EAJ -EAJ DIN Rail Heavy Duty -EAHJ -EAHJ -EAHJ Other Accessories: Reducing Sleeves -PSL- (.. mm) White Reducing Sleeves (.. mm) Grey -PSL- Test Plug -TP -TP -TPL Electrical Warning Plate -EWPL Marking Systems: Snap-In Marker Cards -MX (/card) -MX (/card) Snap-In Marker Cards -MX (/card) -MX (/card) -MX (/card) -MX (/card) Hinged Marker Cards -MHX (/card) -MHX (/card) May only be mounted in terminal block corner marking positions. Publication A-CAA-EN-P -

14 Bulletin IEC Terminal Block Accessories End Barriers End Barriers, continued Dimensions Width x Length x Height For Use With Color. x. x. in. Grey -EBLMP -LMP, LMPQ (. x. x. mm) Blue -EBLMP-B. x. x. in. (. x. x. mm). x. x. in. (. x. x mm) End anchors and end retainers mount at both ends of a group of terminal blocks to add rigidity to the terminal assembly and prevent sliding along the rails. Photo -LM, LMQ, LMG, LMPE, LMPQE Dimensions Width x Length x Height. x. x. in. ( x x mm) -LMJ, LMJG Tightening Torque Markers For Use With Color. lb in (. N m) Grey -EBLM Blue -EBLM-B Yellow -EBLM-Y Grey -EBLMJ Blue -EBLMJ-B Yellow -EBLMJ-Y. x. x. in. (. x x. mm) -LTF -EBLTF. x. x. in. ( x. x mm) -LS-, LS-L, LSG- -EBLS-. x. x. in. -LS-, LS-L, LSG- -EBLS- ( x. x mm) Grey. x. x. in. -LDAG, LDGP -EBLDAG (. x x mm). x. x. in. (. x. x mm) -LC -EBLC. x. x. in. (. x. x mm) -LDC -EBLDC -LDGND, LDN, LDGN Grey -BSPJLDN -LDGND, LDN, LDGN Blue - BSPJLDN-B End Anchor/End Retainers -MX -MX -DR, -DR, -DR, -DR, -DR, -DR, -DR, -DR Grey -EAJ. x. x. in. (. x x mm). lb in. (. N m) -MX -MX -DR, -DR, -DR, -DR, -DR, -DR, -DR, -DR Grey -EAHJ. x. x. in. ( x x mm). lb in. (. N m) -MX -DR Grey -EAJ. x. x. in. ( x. x. mm) -MX -MX -DR, -DR, -DR, -DR, -DR, -DR, -DR, -DR Grey -ERL. x. x. in. ( x. x mm) -MX -MX -DR Grey -ERL Preferred availability cat. nos. are bold. Publication A-CAA-EN-P -