Main catalog. SNK series Terminal blocks. Phone: Fax: Web: -

Size: px
Start display at page:

Download "Main catalog. SNK series Terminal blocks. Phone: Fax: Web: -"

Transcription

1 Main catalog SNK series Terminal blocks

2

3 SNK series, terminal blocks, accessories, marking solutions Ranges and technologies presentation 2 1 PI-Spring terminal blocks 1 2 Screw clamp terminal blocks 49 Pluggable terminal blocks Marking solutions Index Marketing material 22 8 Summary_1 1SNK160027C Edition may 2015 ABB SNK series - Terminal blocks 1

4 Main catalog Main catalog Main catalog Connection devices offering 1 ABB proposes one of the largest connection offering on the market with various technologies: screw, PI-Spring, spring, IDC, pluggable, stud, etc. technologies found in over 8000 products & solutions. SNA series SNK series Terminal blocks Purpose Standard industrial applications Prefered terminal blocks for: Standard and High standard industries Building industry Channel partners Prefered terminal blocks and exclusive technologies for dedicated applications and markets ( energy, railway, process automation, petro-chemical, etc.) Product families & functions Screw Feed-through Multi-deck Ground Disconnect For fuses Screw Feed-through Multi-deck Ground Disconnect For fuses Test & measurement Marshalling Technologies Screw clamp Spring clamp ADO System Pluggable Safety (spring loaded) Ring lug Stud Quick-connect Spring Feed-through Double deck Ground Disconnect For fuses PI-Spring Stud Feed-through Pluggable PI-Spring Feed-through Double deck Ground Disconnect For fuses Feed-through 1 or 2 circuits Functions Protection: PEN, neutral switch Disconnect: multilevel, plugs, etc. For fuse protection Test & Measurement Sensor actuator For distribution boxes Space saving: miniblocks Power distribution Component holders Main catalogs SNA series, terminal blocks SNK series, terminal blocks Solution series, terminal blocks Interactive catalogs: Flash QR code SNA series Terminal blocks SNK series Terminal blocks Solution series Terminal blocks Web 2 ABB SNK series - Terminal blocks

5 Main catalog Main catalogue Main catalog 1 Solution series ESSAILEC Interfast Marking Test blocks for safe and reliable testing on CT and VT (current and voltage transformers) secondary circuits PLC pre-wiring system for fast, flexible, reliable connection of PLC s in process automation applications Markers & marking systems for all identification requirements in electrical panels Current sockets & plugs Voltage sockets & plugs Polarity sockets & plugs Trip sockets & plugs Multicircuits sockets & plugs Coding accessories Protection covers Etc. Interfast PCB: Compact & standard modules Interfast MS: Modular system based on terminal block technology Functions: 1 to 4 wire connections (sensors) Disconnect Fuse Signal indication Relays Optocouplers Solenoid valve control Galvanic isolation (2.5 kv) Terminal block identification and group markers Wire and cable identification Component and equipment identification Panel identification Pre-printed markers for terminal blocks ESSAILEC, test blocks Interface modules & selection guides Marking solutions ESSAILEC range Test blocks Interfast: the PLC pre-wiring system Interface modules Solution series Markers and marking systems 1SNC160052S Rev. C ABB SNK series - Terminal blocks

6 SNK series, terminal blocks PI-Spring and Screw clamp technologies 1 Smart Connections PI-Spring technology + 2 technologies in 1 connection: push-in and spring Perfect connection with or without ferrule Easy and safe insertion of both conductor and screwdriver Excellent pulling strength High corrosion resistance (> 1000 h) Shock and vibration proof Excellent electrical contact stability Available in pluggable version. Smart Logistics Common accessories Compact screwless and screw end stops Plug-in insulated jumpers Cross spacing jumpers PI-Spring and Screw clamp Smart Design Installation is optimized and secured Asymmetrical Design avoids mounting errors Engineered conductor entry for ease of wiring 4 ABB SNK series - Terminal blocks

7 1 Screw clamp technology + High torque resistance The retightening campaigns are not needed anymore thanks to the ABB exclusive anti-release system Hardened steel makes the connection very reliable Flap avoiding the insertion of cable underneath the clamp Available in pluggable version Testing devices Screwless component plugs Blank and pre-marked markers technologies terminal blocks Fewer parts to stock with common end sections Convenient jumpering system up to 50 poles, divisible Clear terminal block identification Top large marker. Hand pre-marking before final marker installation 1SNK160087S0201 ABB SNK series - Terminal blocks 5

8 ABB PI-Spring technology Two technologies in one connection 1 The patented design of ABB s PI-Spring can be used as a Push-in or traditional spring connection: Push-in and spring. The Push-in mode allows a direct one-step insertion of solid and flexible stranded wires with a ferrule, 50% faster than standard screw clamp technology. Using the spring mode, very little effort is required to open the spring clamp with a screwdriver and insert the wire, which does not need a ferrule. The screwdriver locks in the terminal block after insertion, freeing up hands to manipulate wires or circuit drawings. Features All certification testing performed with non prepared wires, ensuring perfect connections with or without ferrules Connection elasticity and design strictly controlled to ensure an easy and safe insertion of both conductor and screwdriver Flat surface of the PI-Spring makes wire and screwdriver insertion smoother and easier The PI-Spring technology has successfully passed aging tests (0 days temperature rise test and 14 days heat cycling test) guaranteeing the perfect long-term contact quality of our screwless technology Excellent pulling strength exceeding IEC standard requirements Dimensions, coating and shape of the linking bar designed to get the lowest and most stable electrical contact value Stainless steel PI-Spring for high corrosion resistance Up to 1,000 hours salt mist resistance Very good electrical contact even in applications where vibration and shock are an issue, such as railway From 0.2 mm² up to 25 mm² From 26 AWG up to 4 AWG 1SNK162052S Rev. A 6 ABB SNK series - Terminal blocks

9 ABB screw clamp technology The heavy duty connection Unique design, flies over time thanks to its reliability and safety The ABB screw clamp technology is designed to avoids accidental releases due to vibrations, shocks or even abusive cable draw. High density capacity The screw clamp technology can fit up to two conductors per clamp which offers extended possibilities in electrical cabinets. 1 Features The clamp is punched, which increases the number of screw threads by 0% meaning a high torque resistance The ABB exclusive anti-release system creates a controlled locking-screw effect thanks to the 2 overlapping tabs that maintain the clamp parts. The screw is locked in total safety. The retightening campaigns are not needed anymore! Screw The screw tightens the conductive bar to the cable. There is no torsion effect applied to the cable Screw clamp Conductive linking bar Stripped wire Hardened steel makes the connection very reliable Flap avoiding the insertion of cable underneath the clamp From 0.2 mm² up to 120 mm² From 24 AWG up to 0000 Kcmil 1SNK161087S Rev. A ABB SNK series - Terminal blocks 7

10 ABB pluggable technology 1 The pluggable technology allows "plug and play" connection. It enables productivity savings, wiring optimization thanks to serialized pre-wired plugs harnesses, as well as secured final commissioning. Features The ABB Plug is the most compact on the market thanks to the punched U-shaped linking bar allowing direct conductor contact. ABB Patented design! The chamfer shape guarantees auto-centering and mechanical integrity of the plug when inserted into the pluggable terminal block The lyres are made of copper alloy in order to offer maximized mechanical elasticity resistance (superior to 50 matings/unmatings) The ABB pluggable terminal blocks have successfully performed the marine environmental tests and meet the most severe rolling stock requirements in axis vibrations and shock resistance (for PI-Spring pluggable terminal blocks versions) From 0.2 mm² up to 4 mm² From 26 AWG up to 10 AWG 1SNK164011S ABB SNK series - Terminal blocks

11 1 PB-1 ABB SNK series - Terminal blocks 9

12 1 SNK series, terminal blocks Applications Qualified for worldwide markets, applications and for severe environments: vibration, shock, corrosion Industry and Commercial Solar SNK series, terminal blocks can be used worldwide in all types of industrial and commercial applications. All our products have CB, UL and CSA third party certificates delivered by independent laboratories. SNK series products are developed and qualified in accordance with the following international standards: IEC , IEC , IEC , IEC , UL 1059, CSA C22.2 n Thanks to their 1000 V rating per IEC , SNK terminal blocks are ideally suited for use in solar equipment. RoHS hazloc DNV RoHS 1SNK160082S Rev. A 10 ABB SNK series - Terminal blocks

13 1 Railways Hazardous locations Marine All SNK series products are suited to trackside fixed equipment. For the more demanding environment of rolling stock applications, PI-Spring has been successfully tested in accordance with IEC 617 requirements to resist high vibration and shock conditions (multi-axial waves, acceleration ). The plastic material used is compliant with the flammability, smoke toxicity and opacity severe requirements of the traction segment and can be classified I2F2 per NF F and NF F standards; HL R22 per EN standard and V0 per UL94 standard. It complies with NFPA 10 per ASTM E 162 and ASTM E 662 standards tests and with FR28.10 and BSS 729 standards. The IRIS certificate guarantees the respect of international railway industry requirements. SNK series is certified IEC Ex in accordance with IEC and IEC (increased safety "Exe") world international standards for products used in explosive atmospheres. In order to serve specific local market requirements, some SNK products have additional local certifications such as: ATEX, UL hazardous Locations or BR-Ex SNK products have successfully passed toughest tests like the thermal endurance test: 2 weeks in hot environment at 95 C (+90% RH) followed by 2 weeks at 125 C and one day cold environment test (-65 C). This proves the high mechanical performances of the SNK products. hazloc SNK products have proven their performance by successfully passing tests required for the most extreme conditions. (eg: salt mist, damp or dry heat and cold environments) per IEC standards. In order to serve the worldwide marine markets requirements, SNK products have the following Marine certifications: BV Marine, DNV, RINA, RMRS. DNV 1SNK160082S Rev. A ABB SNK series - Terminal blocks 11

14 2 Summary_2 12 ABB SNK series - Terminal blocks

15 SNK series, terminal blocks PI-Spring technology Technologies presentation 14 Overview 18 Feed-through 2.5 mm² / 12 AWG ZK ZK2.5-P with connections 20 ZK2.5-4P with 4 connections 21 4 mm² / 10 AWG ZK4 22 ZK4-P with connections 2 ZK4-4P with 4 connections 24 6 mm² / 8 AWG ZK6 25 ZK6-P with connections mm² / 6 AWG ZK mm² / 4 AWG ZK Ground 2.5 mm² / 12 AWG ZK2.5-PE 29 ZK2.5-PE-P with connections 0 ZP2.5-PE-4P with 4 connections 1 4 mm² / 10 AWG ZK4-PE 2 ZK4-PE-P with connections ZK4-PE-4P with 4 connections 4 6 mm² / 8 AWG ZK6-PE 5 ZK6-PE-P with connections 6 10 mm² / 6 AWG ZK10-PE 7 16 mm² / 4 AWG ZK16-PE 8 Disconnect with blade 2.5 mm² / 12 AWG ZK2.5-S with test sockets 9 ZK2.5-S-R1 40 Disconnect with plug 2.5 mm² / 12 AWG ZK2.5-SP with test sockets 41 For 5x20 fuses 2.5 mm² / 12 AWG ZK2.5-SF 42 ZK2.5-SF-R with blown fuse indicator 4 Double deck 2.5 mm² / 12 AWG ZK2.5-D2 2 feed-through circuits 44 ZK2.5-D1 1 feed-through circuit 45 ZK2.5-D2-PE 1 feed-through circuit and 1 ground circuit 46 ZK2.5-D1-PE 1 ground circuit 47 Summary_2 ABB SNK series - Terminal blocks 1

16 SNK series, terminal blocks PI-Spring technology 2 Rely on our steady quality ABB registered patents for the PI-Spring technology. The ABB s manufacturing and quality control processes guarantee that each PI-Spring terminal block is easy to connect. Qualified for worldwide markets and applications, such as hazardous locations, marine, railways. RoHS hazloc 2 in1 The benefits of 2 technologies in 1 connection 50% faster connection time with Push-in mode Our connection technology allows a direct one step insertion with rigid and prepared flexible conductors. Reduced effort and conductor preparation time with spring mode Our connection requires minimal effort to insert wires with the screwdriver. Flexible conductors preparation is not necessary. Two technologies in one single connection 1SNK162051S Rev. A 14 ABB SNK series - Terminal blocks

17 Selection is simplified, stocking is significantly reduced 2 50% less inventory makes PI-Spring attractive to all markets worldwide Stock only one range, get two connection modes (Push-in and spring) The user selects one range which has global certifications and access to markets and applications worldwide. Reduce your accessories inventory by up to 50% SNK PI-Spring and screw ranges share the same accessories All end sections and circuit separators fit several types and sizes of blocks. + Installation is optimized and secured Avoid mounting and wiring errors Asymmetrical design allows immediate visual check in case of reversed terminal blocks Circuit identification is improved thanks to the 20% larger marking area. Save up to 15% space in your cabinet Our compact design saves valuable space between cable trunks The 0 conductor entry angle allows up to a 15% decrease in height while allowing a generous bend radius. Asymmetrical design avoid mounting errors Compact terminal blocks Speed up your projects Pre-mark by hand or with label on our flat marking surface and start immediately the wiring, before the final markers mounting Spare markers re-printing as well in case of modifications. Clear terminal block identification 1SNK162051S Rev. A ABB SNK series - Terminal blocks 15

18 SNK series, terminal blocks PI-Spring technology Range overview from 2.5 to 16 mm² 2 2 Connections Connections Single deck Feed-through Ground Disconnect Fuse Single deck Feed-through Ground Voltage test screwdriver entry point accepts Category II probes Double central channels allows multiconfigurations (jumpering, testing and measuring) 16 ABB SNK series - Terminal blocks

19 2 4 2 Connections 2x Connections Single deck Feed-through Ground Double deck Feed-through Ground Two circuit separators for the entire range End section can be used as circuit separator ABB SNK series - Terminal blocks 17

20 SNK series, terminal blocks PI-Spring technology 2 Feed-through Ground Section 2.5 mm² 12 AWG ZK2.5 ZK2.5-P ZK2.5-4P ZK2.5-PE ZK2.5-PE-P ZK2.5-PE 4P 4 mm² 10 AWG ZK4 ZK4-P ZK4-4P ZK4-PE ZK4-PE-P ZK4-PE- 4P 6 mm² 8 AWG ZK6 ZK6-P ZK6-PE ZK6-PE-P 10 mm² 6 AWG ZK10 ZK10-PE 16 mm² 4 AWG ZK16 ZK16-PE Double deck Feed-through Ground Section 2.5 mm² 12 AWG ZK2.5-D2 ZK2.5-D1 ZK2.5-D2-PE ZK2.5-D1-PE Disconnect With blade With plug For 5x20 mm fuses Aligned with ZK2.5-SF Section 2.5 mm² 12 AWG ZK2.5-S ZK2.5-SP ZK2.5-SF ZK2.5-SF-R1 ZK2.5-S-R1 ZK2.5-SF-R Clamp - Channels for jumpering or testing - Test socket - Blown-fuse indicator 1SNK162020S ABB SNK series - Terminal blocks

21 ZK2.5 PI-Spring terminal blocks Feed-through mm in spacing 2.5 mm² 12 AWG Combine high performance with compact dimensions: 1000 V AC / DC IEC 600 V UL, Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size. 2 ZK " " 5.2 mm in spacing " " 1SNK162052V0014 Feed-through 2 connections Grey ZK2.5 1SNK705010R Blue ZK2.5-BL 1SNK705020R Orange ZK2.5-OR 1SNK70500R Yellow ZK2.5-YL 1SNK705060R Green ZK2.5-GN 1SNK705061R Red ZK2.5-RD 1SNK705062R White ZK2.5-WH 1SNK705065R Black ZK2.5-BK 1SNK705066R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG 2 conductors per clamp Flexible with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Rated current / Rated cross section 24 A / 2.5 mm² 20 A / 12 AWG Rated short-time withstand current (1s) 00 A Short Circuit Current Rating (with specific conditions) 100 ka Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 21 A IEC/EN IM2 II 2 GD Ex eb I/IIC/IIIC Flat screwdriver Ø.5 mm Ø 0.18 in The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5 1SNK705910R Jumper bars 2 poles Orange JB5-2 1SNK90502R poles JB5-1SNK9050R poles JB5-4 1SNK90504R poles JB5-5 1SNK90505R poles JB5-10 1SNK90510R poles JB5-50 1SNK90550R Cross spacing jumpers Orange JB85-1SNK90060R Circuit separators mm in Dark grey CS-R2 1SNK900106R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Shield connectors SHBP 1SNK900601R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground PI-Spring terminal blocks Ground Profile aligned with ZK2.5 Green-yellow ZK2.5-PE 1SNK705150R SNK16202S Rev. A ABB SNK series - Terminal blocks 19

22 ZK2.5-P PI-Spring terminal blocks Feed-through with connections mm in spacing 2 ZK2.5-P " " 5.2 mm in spacing 2.5 mm² 12 AWG " " 1SNK162061V0014 Find all the features of the ZK2.5 terminal block with the added option of distributing or branching conductors. Feed-through connections Grey ZK2.5-P 1SNK705011R Blue ZK2.5-P-BL 1SNK705021R Orange ZK2.5-P-OR 1SNK70501R Yellow ZK2.5-P-YL 1SNK705067R Green ZK2.5-P-GN 1SNK705068R Red ZK2.5-P-RD 1SNK705069R White ZK2.5-P-WH 1SNK705072R Black ZK2.5-P-BK 1SNK70507R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG 2 conductors per clamp Flexible with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Rated current / Rated cross section 24 A / 2.5 mm² 20 A / 12 AWG Rated short-time withstand current (1s) 00 A Short Circuit Current Rating (with specific conditions) 100 ka Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 21 A IEC/EN IM2 II 2 GD Ex eb I/IIC/IIIC Flat screwdriver Ø.5 mm Ø 0.18 in The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5-P 1SNK705911R Jumper bars 2 poles Orange JB5-2 1SNK90502R poles JB5-1SNK9050R poles JB5-4 1SNK90504R poles JB5-5 1SNK90505R poles JB5-10 1SNK90510R poles JB5-50 1SNK90550R Cross spacing jumpers Orange JB85-1SNK90060R Circuit separators mm in Dark grey CS-R 1SNK900107R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground PI-Spring terminal blocks Ground Profile aligned with ZK2.5-P Green-yellow ZK2.5-PE-P 1SNK705151R SNK162024S Rev. A 20 ABB SNK series - Terminal blocks

23 ZK2.5-4P PI-Spring terminal blocks Feed-through with 4 connections mm in spacing ZK2.5-4P 2.5 mm² 12 AWG 1SNK162070V0014 Find all the features of the ZK2.5 terminal block with the added option of distributing or branching 4 conductors. Feed-through 4 connections Grey ZK2.5-4P 1SNK705012R Blue ZK2.5-4P-BL 1SNK705022R Orange ZK2.5-4P-OR 1SNK70502R Yellow ZK2.5-4P-YL 1SNK705074R Green ZK2.5-4P-GN 1SNK705075R Red ZK2.5-4P-RD 1SNK705076R White ZK2.5-4P-WH 1SNK705079R Black ZK2.5-4P-BK 1SNK705080R " " " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " 5.2 mm in spacing 2 conductors per clamp Flexible with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Rated current / Rated cross section 24 A / 2.5 mm² 20 A / 12 AWG Rated short-time withstand current (1s) 00 A Short Circuit Current Rating (with specific conditions) 100 ka Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 21 A IEC/EN IM2 II 2 GD Ex eb I/IIC/IIIC Flat screwdriver Ø.5 mm Ø 0.18 in The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5-4P 1SNK705912R Jumper bars 2 poles Orange JB5-2 1SNK90502R poles JB5-1SNK9050R poles JB5-4 1SNK90504R poles JB5-5 1SNK90505R poles JB5-10 1SNK90510R poles JB5-50 1SNK90550R Cross spacing jumpers Orange JB85-1SNK90060R Circuit separators mm in Dark grey CS-R 1SNK900107R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground PI-Spring terminal blocks Ground Profile aligned with ZK2.5-4P Green-yellow ZK2.5-PE-4P 1SNK705152R SNK162025S Rev. A ABB SNK series - Terminal blocks 21

24 ZK4 PI-Spring terminal blocks Feed-through - 6 mm 0.26 in spacing 2 4 mm² 10 AWG Combine high performance with compact dimensions: 1000 V AC / DC IEC 600 V UL, Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size. 1SNK1620V0014 Feed-through 2 connections Grey ZK4 1SNK706010R Blue ZK4-BL 1SNK706020R Orange ZK4-OR 1SNK70600R ZK " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 1 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " 6 mm 0.26 in spacing " " 2 conductors per clamp Flexible with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Rated current / Rated cross section 2 A / 4 mm² 0 A / 10 AWG Rated short-time withstand current (1s) 480 A Short Circuit Current Rating (with specific conditions) 100 ka Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 29 A IEC/EN IM2 II 2 GD Ex eb I/IIC/IIIC Flat screwdriver Ø.5 mm Ø 0.18 in The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5 1SNK705910R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R poles JB6-50 1SNK90650R Cross spacing jumpers Orange JB85-1SNK90060R Circuit separators mm in Dark grey CS-R2 1SNK900106R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground PI-Spring terminal blocks Ground Profile aligned with ZK4 Green-yellow ZK4-PE 1SNK706150R SNK162026S Rev. A 22 ABB SNK series - Terminal blocks

25 ZK4-P PI-Spring terminal blocks Feed-through with connections - 6 mm 0.26 in spacing ZK4-P 4 mm² 10 AWG 1SNK16207V0014 Find all the features of the ZK4 terminal block with the added option of distributing or branching conductors. Feed-through connections Grey ZK4-P 1SNK706011R Blue ZK4-P-BL 1SNK706021R Orange ZK4-P-OR 1SNK70601R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 1 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " 6 mm 0.26 in spacing " " " 2 conductors per clamp Flexible with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Rated current / Rated cross section 2 A / 4 mm² 0 A / 10 AWG Rated short-time withstand current (1s) 480 A Short Circuit Current Rating (with specific conditions) 100 ka Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 29 A IEC/EN IM2 II 2 GD Ex eb I/IIC/IIIC Flat screwdriver Ø.5 mm Ø 0.18 in The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available onabb. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5-P 1SNK705911R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R poles JB6-50 1SNK90650R Cross spacing jumpers Orange JB85-1SNK90060R Circuit separators mm in Dark grey CS-R 1SNK900107R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground PI-Spring terminal blocks Ground Profile aligned with ZK4-P Green-yellow ZK4-PE-P 1SNK706151R SNK162027S Rev. A ABB SNK series - Terminal blocks 2

26 ZK4-4P PI-Spring terminal blocks Feed-through with 4 connections - 6 mm 0.26 in spacing 2 ZK4-4P " 4 mm² 10 AWG 1SNK162041V0014 Find all the features of the ZK4 terminal block with the added option of distributing or branching 4 conductors. Feed-through 4 connections Grey ZK4-4P 1SNK706012R Blue ZK4-4P-BL 1SNK706022R Orange ZK4-4P-OR 1SNK70602R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 1 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " 6 mm 0.26 in spacing " " 2 conductors per clamp Flexible with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Rated current / Rated cross section 2 A / 4 mm² 0 A / 10 AWG Rated short-time withstand current (1s) 480 A Short Circuit Current Rating (with specific conditions) 100 ka Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 29 A IEC/EN IM2 II 2 GD Ex eb I/IIC/IIIC Flat screwdriver Ø.5 mm Ø 0.18 in The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5-4P 1SNK705912R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R poles JB6-50 1SNK90650R Cross spacing jumpers Orange JB85-1SNK90060R Circuit separators mm in Dark grey CS-R 1SNK900107R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground PI-Spring terminal blocks Ground Profile aligned with ZK4-4P Green-yellow ZK4-PE-4P 1SNK706152R SNK162028S Rev. A 24 ABB SNK series - Terminal blocks

27 ZK6 PI-Spring terminal blocks Feed-through - 8 mm 0.15 in spacing 6 mm² 8 AWG Combine high performance with compact dimensions: 1000 V AC / DC IEC 600 V UL, Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size. 2 1SNK162045V0014 Feed-through 2 connections Grey ZK6 1SNK708010R Blue ZK6-BL 1SNK708020R Orange ZK6-OR 1SNK70800R ZK " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 1 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " 8 mm 0.15 in spacing " " 2 conductors per clamp Flexible with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Flat screwdriver Ø.5 mm Ø 0.18 in Rated current / Rated cross section 41 A / 6 mm² 50 A / 8 AWG Rated short-time withstand current (1s) 720 A Short Circuit Current Rating (with specific conditions) 100 ka Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 7 A IEC/EN IM2 II 2 GD Ex eb I/IIC/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB Website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5 1SNK705910R Jumper bars 2 poles Orange JB8-2 1SNK90802R poles JB8-1SNK9080R poles JB8-4 1SNK90804R poles JB8-5 1SNK90805R poles JB8-10 1SNK90810R Cross spacing jumpers Orange JB85-1SNK90060R Circuit separators mm in Dark grey CS-R2 1SNK900106R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 2.8 mm in Dark grey ES-TC8 1SNK900104R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground PI-Spring terminal blocks Ground Profile aligned with ZK6 Green-yellow ZK6-PE 1SNK708150R SNK162029S Rev. A ABB SNK series - Terminal blocks 25

28 ZK6-P PI-Spring terminal blocks Feed-through with connections - 8 mm 0.15 in spacing 2 ZK6-P " " 8 mm 0.15 in spacing 6 mm² 8 AWG " " 1SNK162049V0014 Find all the features of the ZK6 terminal block with the added option of distributing or branching conductors. Feed-through connections Grey ZK6-P 1SNK708011R Blue ZK6-P-BL 1SNK708021R Orange ZK6-P-OR 1SNK70801R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 1 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG 2 conductors per clamp Flexible with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Flat screwdriver Ø.5 mm Ø 0.18 in Rated current / Rated cross section 41 A / 6 mm² 50 A / 8 AWG Rated short-time withstand current (1s) 720 A Short Circuit Current Rating (with specific conditions) 100 ka Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 7 A IEC/EN IM2 II 2 GD Ex eb I/IIC/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB Website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK6-P 1SNK708911R Jumper bars 2 poles Orange JB8-2 1SNK90802R poles JB8-1SNK9080R poles JB8-4 1SNK90804R poles JB8-5 1SNK90805R poles JB8-10 1SNK90810R Cross spacing jumpers Orange JB85-1SNK90060R Circuit separators mm in Dark grey CS-R 1SNK900107R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 2.8 mm in Dark grey ES-TC8 1SNK900104R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground PI-Spring terminal blocks Ground Profile aligned with ZK6-P Green-yellow ZK6-PE-P 1SNK708151R SNK16200S Rev. A 26 ABB SNK series - Terminal blocks

29 ZK10 PI-Spring terminal blocks Feed-through - 10 mm 0.94 in spacing 10 mm² 6 AWG Combine high performance with compact dimensions: 1000 V AC / DC IEC 600 V UL, Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size. 2 1SNK162072V0014 Feed-through 2 connections Grey ZK10 1SNK710010R Blue ZK10-BL 1SNK710020R Orange ZK10-OR 1SNK71000R ZK " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 15 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " 10 mm 0.94 in spacing " " 2 conductors per clamp Flexible with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Flat screwdriver Ø 4 mm Ø in Rated current / Rated cross section 57 A / 10 mm² 55 A / 6 AWG Rated short-time withstand current (1s) 1200 A Short Circuit Current Rating (with specific conditions) 100 ka Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 51 A IEC/EN IM2 II 2 GD Ex eb I/IIC/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB Website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK10 1SNK710910R Jumper bars 2 poles Orange JB10-2 1SNK91002R poles JB10-1SNK9100R poles JB10-4 1SNK91004R poles JB10-5 1SNK91005R poles JB SNK91010R Circuit separators mm in Dark grey CS-R 1SNK900107R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground PI-Spring terminal blocks Ground Profile aligned with ZK10 Green-yellow ZK10-PE 1SNK710150R SNK16201S Rev. A ABB SNK series - Terminal blocks 27

30 ZK16 PI-Spring terminal blocks Feed-through - 12 mm in spacing 2 16 mm² 4 AWG Combine high performance with compact dimensions: 1000 V AC / DC IEC 600 V UL, Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size. 1SNK162075V0014 Feed-through 2 connections Grey ZK16 1SNK712010R Blue ZK16-BL 1SNK712020R ZK " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 15 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " 12 mm in spacing " " 2 conductors per clamp Flexible with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Flat screwdriver Ø 4 mm Ø in Rated current / Rated cross section 76 A / 16 mm² 75 A / 4 AWG Rated short-time withstand current (1s) 1960 A Short Circuit Current Rating (with specific conditions) 100 ka Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 69 A IEC/EN IM2 II 2 GD Ex eb I/IIC/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB Website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK10 1SNK710910R Jumper bars 2 poles Orange JB12-2 1SNK91202R poles JB12-1SNK9120R poles JB12-5 1SNK91205R Circuit separators mm in Dark grey CS-R 1SNK900107R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground PI-Spring terminal blocks Ground Profile aligned with ZK16 Green-yellow ZK16-PE 1SNK712150R SNK16202S Rev. A 28 ABB SNK series - Terminal blocks

31 ZK2.5-PE PI-Spring terminal blocks Ground mm in spacing 2.5 mm² 12 AWG Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: Rail contact non operator dependent, Performances above the requirements of the IEC terminal block standard, Secured snap on or off the rail, Profile aligned with ZK SNK162081V0014 Ground 2 connections Green-yellow ZK2.5-PE 1SNK705150R ZK2.5-PE " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " " End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5 1SNK705910R Circuit separators mm in Dark grey CS-R2 1SNK900106R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK16209S Rev. A Rated cross section 2.5 mm² 12 AWG Rated short-time withstand current (1s) 00 A 96 A Tool (for flexible conductor without ferrule) Flat screwdriver Ø.5 mm Ø 0.18 in " 5.2 mm in spacing Protection IP20 NEMA 1 Explosive atmosphere classification IM2 II 2 GD Ex eb I/IIC/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available onabb Website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV ABB SNK series - Terminal blocks 29

32 ZK2.5-PE-P PI-Spring terminal blocks Ground with connections mm in spacing mm² 12 AWG Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: Rail contact non operator dependent, Performances above the requirements of the IEC terminal block standard, Secured snap on or off the rail, Profile aligned with ZK2.5-P. 1SNK162069V0014 Ground connections Green-yellow ZK2.5-PE-P 1SNK705151R ZK2.5-PE-P " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " " End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5-P 1SNK705911R Circuit separators mm in Dark grey CS-R 1SNK900107R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK162040S Rev. A Rated cross section 2.5 mm² 12 AWG Rated short-time withstand current (1s) 00 A 96 A Tool (for flexible conductor without ferrule) Flat screwdriver Ø.5 mm Ø 0.18 in " 5.2 mm in spacing Protection IP20 NEMA 1 Explosive atmosphere classification IM2 II 2 GD Ex eb I/IIC/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available onabb Website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV 0 ABB SNK series - Terminal blocks

33 ZK2.5-PE-4P PI-Spring terminal blocks Ground with 4 connections mm in spacing ZK2.5-PE-4P " " 5.2 mm in spacing 2.5 mm² 12 AWG " " 1SNK16202V0014 Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: Rail contact non operator dependent, Performances above the requirements of the IEC terminal block standard, Secured snap on or off the rail, Profile aligned with ZK2.5-4P. Ground 4 connections Green-yellow ZK2.5-PE-4P 1SNK705152R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Rated cross section 2.5 mm² 12 AWG Rated short-time withstand current (1s) 00 A 96 A Tool (for flexible conductor without ferrule) Flat screwdriver Ø.5 mm Ø 0.18 in End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5-4P 1SNK705912R Circuit separators mm in Dark grey CS-R 1SNK900107R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK162041S Rev. A Protection IP20 NEMA 1 Explosive atmosphere classification IM2 II 2 GD Ex eb I/IIC/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB Website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV ABB SNK series - Terminal blocks 1

34 ZK4-PE PI-Spring terminal blocks Ground - 6 mm 0.26 in spacing 2 4 mm² 10 AWG Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: Rail contact non operator dependent, Performances above the requirements of the IEC terminal block standard, Secured snap on or off the rail, Profile aligned with ZK4. 1SNK16206V0014 Ground 2 connections Green-yellow ZK4-PE 1SNK706150R ZK4-PE " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 1 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " " End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5 1SNK705910R Circuit separators mm in Dark grey CS-R2 1SNK900106R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK162042S Rev. A Rated cross section 4 mm² 10 AWG Rated short-time withstand current (1s) 480 A 66 A Tool (for flexible conductor without ferrule) Flat screwdriver Ø.5 mm Ø 0.18 in " 6 mm 0.26 in spacing Protection IP20 NEMA 1 Explosive atmosphere classification IM2 II 2 GD Ex eb I/IIC/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available onabb Website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV 2 ABB SNK series - Terminal blocks

35 ZK4-PE-P PI-Spring terminal blocks Ground with connections - 6 mm 0.26 in spacing 4 mm² 10 AWG Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: Rail contact non operator dependent, Performances above the requirements of the IEC terminal block standard, Secured snap on or off the rail, Profile aligned with ZK4-P. 2 1SNK162040V0014 Ground connections Green-yellow ZK4-PE-P 1SNK706151R ZK4-PE-P 79.11" Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 1 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " " End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5-P 1SNK705911R Circuit separators mm in Dark grey CS-R 1SNK900107R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK16204S Rev. A Rated cross section 4 mm² 10 AWG Rated short-time withstand current (1s) 480 A 66 A Tool (for flexible conductor without ferrule) Flat screwdriver Ø.5 mm Ø 0.18 in " 6 mm 0.26 in spacing Protection IP20 NEMA 1 Explosive atmosphere classification IM2 II 2 GD Ex eb I/IIC/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available onabb Website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV ABB SNK series - Terminal blocks

36 ZK4-PE-4P PI-Spring terminal blocks Ground with 4 connections - 6 mm 0.26 in spacing 2 ZK4-PE-4P " " 6 mm 0.26 in spacing 4 mm² 10 AWG " " 1SNK162044V0014 Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: Rail contact non operator dependent, Performances above the requirements of the IEC terminal block standard, Secured snap on or off the rail, Profile aligned with ZK4-4P. Ground 4 connections Green-yellow ZK4-PE-4P 1SNK706152R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 1 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Rated cross section 4 mm² 10 AWG Rated short-time withstand current (1s) 480 A 66 A Tool (for flexible conductor without ferrule) Flat screwdriver Ø.5 mm Ø 0.18 in End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5-4P 1SNK705912R Circuit separators mm in Dark grey CS-R 1SNK900107R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK162044S Rev. A Protection IP20 NEMA 1 Explosive atmosphere classification IM2 II 2 GD Ex eb I/IIC/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available onabb Website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV 4 ABB SNK series - Terminal blocks

37 ZK6-PE PI-Spring terminal blocks Ground - 8 mm 0.15 in spacing 6 mm² 8 AWG Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: Rail contact non operator dependent, Performances above the requirements of the IEC terminal block standard, Secured snap on or off the rail, Profile aligned with ZK6. 2 1SNK162048V0014 Ground 2 connections Green-yellow ZK6-PE 1SNK708150R ZK6-PE " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 1 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " " End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5 1SNK705910R Circuit separators mm in Dark grey CS-R2 1SNK900106R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK162045S Rev. A Rated cross section 6 mm² 8 AWG Rated short-time withstand current (1s) 720 A 1008 A Tool (for flexible conductor without ferrule) Flat screwdriver Ø.5 mm Ø 0.18 in " 8 mm 0.15 in spacing Protection IP20 NEMA 1 Explosive atmosphere classification IM2 II 2 GD Ex eb I/IIC/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available onabb Website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV ABB SNK series - Terminal blocks 5

38 ZK6-PE-P PI-Spring terminal blocks Ground with connections - 8 mm 0.15 in spacing 2 6 mm² 8 AWG Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: Rail contact non operator dependent, Performances above the requirements of the IEC terminal block standard, Secured snap on or off the rail, Profile aligned with ZK6-P. 1SNK162082V0014 Ground connections Green-yellow ZK6-PE-P 1SNK708151R ZK6-PE-P " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 1 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " " End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK6-P 1SNK708911R Circuit separators mm in Dark grey CS-R 1SNK900107R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK162046S Rev. A Rated cross section 6 mm² 8 AWG Rated short-time withstand current (1s) 720 A 1008 A Tool (for flexible conductor without ferrule) Flat screwdriver Ø.5 mm Ø 0.18 in " 8 mm 0.15 in spacing Protection IP20 NEMA 1 Explosive atmosphere classification IM2 II 2 GD Ex eb I/IIC/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available onabb Website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV 6 ABB SNK series - Terminal blocks

39 ZK10-PE PI-Spring terminal blocks Ground - 10 mm 0.94 in spacing 10 mm² 6 AWG Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: Rail contact non operator dependent, Performances above the requirements of the IEC terminal block standard, Secured snap on or off the rail, Profile aligned with ZK SNK16208V0014 Ground 2 connections Green-yellow ZK10-PE 1SNK710150R ZK10-PE " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 15 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " " End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK10 1SNK710910R Jumper bars 2 poles 76 A 67 A Orange JB10-2 1SNK91002R Circuit separators mm in Dark grey CS-R 1SNK900107R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK162047S Rev. A Rated cross section 10 mm² 6 AWG Rated short-time withstand current (1s) 1200 A 1596 A Tool (for flexible conductor without ferrule) Flat screwdriver Ø 4 mm Ø in " 10 mm 0.94 in spacing Protection IP20 NEMA 1 Explosive atmosphere classification IM2 II 2 GD Ex eb I/IIC/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available onabb Website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV ABB SNK series - Terminal blocks 7

40 ZK16-PE PI-Spring terminal blocks Ground - 12 mm in spacing 2 16 mm² 4 AWG Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: Rail contact non operator dependent, Performances above the requirements of the IEC terminal block standard, Secured snap on or off the rail, Profile aligned with ZK16. 1SNK162084V0014 Ground 2 connections Green-yellow ZK16-PE 1SNK712150R ZK16-PE " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 15 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " " End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK10 1SNK710910R Jumper bars 2 poles 76 A Orange JB12-2 1SNK91202R Circuit separators mm in Dark grey CS-R 1SNK900107R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK162048S Rev. A Rated cross section 16 mm² 4 AWG Rated short-time withstand current (1s) 1960 A 2544 A Tool (for flexible conductor without ferrule) Flat screwdriver Ø 4 mm Ø in " 12 mm in spacing Protection IP20 NEMA 1 Explosive atmosphere classification IM2 II 2 GD Ex eb I/IIC/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available onabb Website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV 8 ABB SNK series - Terminal blocks

41 ZK2.5-S PI-Spring terminal blocks Disconnect with blade - with test sockets mm in spacing 2.5 mm² 12 AWG Combine high performance with compact dimensions: 60 V IEC 00 V UL. Secure the current measurement: for currents below 50 ma, thanks to 2 built in test points DIA 2 mm in, for currents up to 16 A, by using the TP4 test adapter inserted into the jumper channels. 2 1SNK162085V0014 Disconnect with 2 test sockets DIA 2 mm Grey ZK2.5-S 1SNK70510R in Blue ZK2.5-S-BL 1SNK70520R Orange ZK2.5-S-OR 1SNK7050R ZK2.5-S " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " " " " 2 conductors per clamp with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Rated current / Rated cross section 20 A / 2.5 mm² 20 A / 12 AWG Rated short-time withstand current (1s) 00 A Flat screwdriver Ø.5 mm Ø 0.18 in " 5.2 mm in spacing Rated voltage 60 V 00 V Impulse withstand voltage 6000 V Protection IP20 NEMA 1 Recommendation for best usage: in horizontal assemblies, disconnect terminal blocks should be mounted with fixed foot on top (power side) so that the disconnect knife does not partially close through gravity. Furthermore, as specified per IEC , disconnect terminal blocks are intended to be used for temporary disconnection at zero potential and at no load. The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available onabb Website. CE CB RoHS USR CNR CSA EAC BV DNV End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5-P 1SNK705911R Jumper bars 2 poles Orange JB5-2 1SNK90502R poles JB5-1SNK9050R poles JB5-4 1SNK90504R poles JB5-5 1SNK90505R poles JB5-10 1SNK90510R poles JB5-50 1SNK90550R Circuit separators mm in Dark grey CS-R 1SNK900107R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Shield connectors SHBP 1SNK900601R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK16206S Rev. A ABB SNK series - Terminal blocks 9

42 ZK2.5-S-R1 PI-Spring terminal blocks Disconnect with blade - 6 mm 0.26 in spacing 2.5 mm² 12 AWG Simplify the distribution of circuits in marshalling cabinets thanks to our disconnect terminal blocks with the same profile as ZK2.5-SF fuse. 2 Disconnect Profile aligned with ZK2.5-SF Grey ZK2.5-S-R1 1SNK70610R SNK162088V0014 Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG ZK2.5-S-R " 2 conductors per clamp with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Rated current / Rated cross section 20 A / 2.5 mm² 20 A / 12 AWG Rated short-time withstand current (1s) 00 A Flat screwdriver Ø.5 mm Ø 0.18 in " 6 mm 0.26 in spacing " " " " Rated voltage 60 V 00 V Impulse withstand voltage 6000 V Protection IP20 NEMA 1 Recommendation for best usage: in horizontal assemblies, disconnect terminal blocks should be mounted with fixed foot on top (power side) so that the disconnect knife does not partially close through gravity. Furthermore, as specified per IEC , disconnect terminal blocks are intended to be used for temporary disconnection at zero potential and at no load. The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available onabb Website. CE CB RoHS USR CNR CSA EAC BV DNV End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5-P 1SNK705911R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R poles JB6-50 1SNK90650R Circuit separators mm in Dark grey CS-R 1SNK900107R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. ZK4-P ZK2.5-SF PI-Spring terminal blocks Feed-through Grey ZK4-P 1SNK706011R Fuse Grey, dark grey ZK2.5-SF 1SNK706410R SNK16207S Rev. A 40 ABB SNK series - Terminal blocks

43 ZK2.5-SP PI-Spring terminal blocks Disconnect with plug - with test sockets mm in spacing ZK2.5-SP 2.5 mm² 12 AWG 1SNK162089V0014 The flexible solution for fitting the component of your choice in series with our quick-fitting PG5 component holder plug: compatible with components of 8.8 x.2 mm 0.46 x in, such as resistors, diodes or mini axial fuses. Disconnect with 2 test sockets DIA 2 mm in Grey ZK2.5-SP 1SNK70511R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " " " 2 conductors per clamp with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Rated current / Rated cross section 17 A / 2.5 mm² 18 A / 12 AWG Rated short-time withstand current (1s) 00 A Rated voltage 60 V 00 V Impulse withstand voltage 6000 V Protection IP20 NEMA 1 Flat screwdriver Ø.5 mm Ø 0.18 in " 5.2 mm in spacing The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available onabb Website. CE CB RoHS USR CNR CSA EAC BV DNV End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5-P 1SNK705911R Jumper bars 2 poles Orange JB5-2 1SNK90502R poles JB5-1SNK9050R poles JB5-4 1SNK90504R poles JB5-5 1SNK90505R poles JB5-10 1SNK90510R poles JB5-50 1SNK90550R Circuit separators mm in Dark grey CS-R 1SNK900107R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Shield connectors SHBP 1SNK900601R Component plugs Components in series with circuit Dark grey PG5 1SNK900401R Disconnect plugs Equipped with linking bar Orange PG5-R1 1SNK900402R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK16208S Rev. A ABB SNK series - Terminal blocks 41

44 ZK2.5-SF PI-Spring terminal blocks For 5x20 fuses - 6 mm 0.26 in spacing mm² 12 AWG Protect your circuits with 5x20 fuse terminal blocks compliant with IEC standard (fuse not supplied with the terminal blocks), Simplify the distribution thanks to the 2 jumper channels aligned with ZK4-P feed-through and ZK2.5-S-R1 disconnect terminal blocks. Fuse Grey, dark grey ZK2.5-SF 1SNK706410R SNK162090V0014 Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG ZK2.5-SF " 2 conductors per clamp with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Rated current / Rated cross section 6. A / 2.5 mm² 16 A / 12 AWG Rated short-time withstand current (1s) Rated voltage 500 V 00 V Impulse withstand voltage 6000 V Protection IP20 NEMA 1 Flat screwdriver Ø.5 mm Ø 0.18 in " " The fuse holder must be first disconnected prior any fuse replacement. Mount your fuse safely without touching any active part: put the fuse into the hooks of the fuse holder shutter; at the closing of the shutter, the fuse is perfectly in place in the fuse holder. Separate arrangement Assembly composed of 1 fuse terminal block in between non fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 2.5 W 4 W " 6 mm 0.26 in spacing Compound arrangement Assembly composed of 5 fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available onabb Website. 1.6 W 4 W CE CB RoHS USR CNR CSA EAC BV DNV End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5-P 1SNK705911R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R poles JB6-50 1SNK90650R Circuit separators mm in Dark grey CS-R 1SNK900107R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK162021S Rev. A 42 ABB SNK series - Terminal blocks

45 ZK2.5-SF-R PI-Spring terminal blocks For 5x20 fuses - with blown fuse indicator - 6 mm 0.26 in spacing 2.5 mm² 12 AWG Protect your circuits with 5x20 fuse terminal blocks compliant with IEC standard (fuse not supplied with the terminal blocks), Simplify the distribution thanks to the 2 jumper channels aligned with ZK4-P feed-through and ZK2.5-S-R1 disconnect terminal blocks, Quickly identify the defective circuit thanks to the blown fuse indicator (with leakage current < 0.5 ma). 2 1SNK162091V0014 Fuse with blown fuse indicator V AC / DC Grey, dark grey ZK2.5-SF-R1 1SNK706411R with blown fuse indicator V AC / DC ZK2.5-SF-R 1SNK706412R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG ZK2.5-SF-R " 2 conductors per clamp with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Rated current / Rated cross section 6. A / 2.5 mm² 16 A / 12 AWG Rated short-time withstand current (1s) Rated voltage 500 V 00 V Impulse withstand voltage 6000 V Protection IP20 NEMA 1 Flat screwdriver Ø.5 mm Ø 0.18 in " " The fuse holder must be first disconnected prior any fuse replacement. Mount your fuse safely without touching any active part: put the fuse into the hooks of the fuse holder shutter; at the closing of the shutter, the fuse is perfectly in place in the fuse holder. Separate arrangement Assembly composed of 1 fuse terminal block in between non fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 2.5 W 4 W " 6 mm 0.26 in spacing Compound arrangement Assembly composed of 5 fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 1.6 W 4 W The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available onabb Website. CE CB RoHS USR CNR CSA EAC BV DNV End stops 5.2 mm in Dark grey BAZ1 1SNK900002R End sections 2 mm in Dark grey EK2.5-P 1SNK705911R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R poles JB6-50 1SNK90650R Circuit separators mm in Dark grey CS-R 1SNK900107R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK162022S Rev. A ABB SNK series - Terminal blocks 4

46 ZK2.5-D2 PI-Spring terminal blocks Double deck with 2 feed-through circuits mm in spacing 2 ZK2.5-D2 2.5 mm² 12 AWG 1SNK162060V0014 Combine high performance with compact dimensions: 800 V IEC 600 V UL, 2 jumper channels and a large input and output marker zone on each deck. Double deck 2 feed-through circuits Grey ZK2.5-D2 1SNK705210R Blue ZK2.5-D2-BL 1SNK705220R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " " 5.2 mm in spacing " " 2 conductors per clamp Flexible with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Rated current / Rated cross section 24 A / 2.5 mm² 20 A / 12 AWG Rated short-time withstand current (1s) 00 A Short Circuit Current Rating (with specific conditions) 100 ka Rated voltage 800 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 21 A IEC/EN IM2 II 2 GD Ex eb I/IIC/IIIC Flat screwdriver Ø.5 mm Ø 0.18 in The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available onabb Website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R End sections 2 mm in Dark grey EK2.5-D2 1SNK705960R Jumper bars 2 poles Orange JB5-2 1SNK90502R poles JB5-1SNK9050R poles JB5-4 1SNK90504R poles JB5-5 1SNK90505R poles JB5-10 1SNK90510R poles JB5-50 1SNK90550R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Shield connectors SHB 1SNK900602R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Double deck PI-Spring terminal blocks Double deck Profile aligned with ZK2.5-D2 and ZK2.5-D1 Green-yellow ZK2.5-D1-PE 1SNK705250R SNK1620S Rev. A 44 ABB SNK series - Terminal blocks

47 ZK2.5-D1 PI-Spring terminal blocks Double deck with 1 feed-through circuit mm in spacing 2.5 mm² 12 AWG Find the same functionalities as ZK2.5-D2 and ease one potential distribution on 4 independent connections. Double deck 1 feed-through circuit Grey ZK2.5-D1 1SNK705211R SNK162078V0014 Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG ZK2.5-D " " " 2 conductors per clamp Flexible with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Rated current / Rated cross section 24 A / 2.5 mm² 20 A / 12 AWG Rated short-time withstand current (1s) 00 A Short Circuit Current Rating (with specific conditions) 100 ka Rated voltage 800 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 21 A IEC/EN IM2 II 2 GD Ex eb I/IIC/IIIC Flat screwdriver Ø.5 mm Ø 0.18 in The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB Website " 5.2 mm in spacing CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R End sections 2 mm in Dark grey EK2.5-D2 1SNK705960R Jumper bars 2 poles Orange JB5-2 1SNK90502R poles JB5-1SNK9050R poles JB5-4 1SNK90504R poles JB5-5 1SNK90505R poles JB5-10 1SNK90510R poles JB5-50 1SNK90550R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Shield connectors SHB 1SNK900602R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Double deck PI-Spring terminal blocks Double deck Profile aligned with ZK2.5-D2 and ZK2.5-D1 Green-yellow ZK2.5-D1-PE 1SNK705250R SNK16205S Rev. A ABB SNK series - Terminal blocks 45

48 ZK2.5-D2-PE PI-Spring terminal blocks Double deck with 1 feed-through circuit and 1 ground circuit 5.2 mm in spacing mm² 12 AWG Combine high performance with compact dimensions: 800 V IEC 600 V UL, 1 feed through circuit and 1 ground circuit in just 5.2 mm in spacing, 2 jumper channels and a large input and output marker zone on each deck, designed for easy wiring. ZK2.5-D2-PE 84.6." 1SNK162079V0014 Double deck 1 feed-through circuit and 1 ground circuit Grey, Green-yellow ZK2.5-D2-PE 1SNK705212R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " 5.2 mm in spacing " " 2 conductors per clamp Flexible with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Rated current / Rated cross section 24 A / 2.5 mm² 20 A / 12 AWG Rated short-time withstand current (1s) 00 A Short Circuit Current Rating (with specific conditions) Rated voltage 800 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 21 A IEC/EN IM2 II 2 GD Ex eb I/IIC/IIIC Flat screwdriver Ø.5 mm Ø 0.18 in The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB Website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R End sections 2 mm in Dark grey EK2.5-D2 1SNK705960R Jumper bars 2 poles Orange JB5-2 1SNK90502R poles JB5-1SNK9050R poles JB5-4 1SNK90504R poles JB5-5 1SNK90505R poles JB5-10 1SNK90510R poles JB5-50 1SNK90550R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Shield connectors SHB 1SNK900602R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Double deck PI-Spring terminal blocks Double deck Grey ZK2.5-D2 1SNK705210R SNK16204S Rev. A 46 ABB SNK series - Terminal blocks

49 ZK2.5-D1-PE PI-Spring terminal blocks Double deck with 1 ground circuit mm in spacing 2.5 mm² 12 AWG Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: Rail contact non operator dependent, Performances above the requirements of the IEC terminal block standard, Secured snap on or off the rail, Profile aligned with ZK2.5-D2. 2 1SNK162080V0014 Double deck 1 ground circuit Green-yellow ZK2.5-D1-PE 1SNK705250R ZK2.5-D1-PE 84.6." Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " " End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R End sections 2 mm in Dark grey EK2.5-D2 1SNK705960R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Shield connectors SHB 1SNK900602R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK162049S Rev. A Rated cross section 2.5 mm² 12 AWG Rated short-time withstand current (1s) 00 A 96 A Tool (for flexible conductor without ferrule) Flat screwdriver Ø.5 mm Ø 0.18 in " 5.2 mm in spacing Protection IP20 NEMA 1 Explosive atmosphere classification IM2 II 2 GD Ex eb I/IIC/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB Website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV DNV ABB SNK series - Terminal blocks 47

50 Summary_ 48 ABB SNK series - Terminal blocks

51 SNK series, terminal blocks Screw clamp technology Technologies presentation 50 Overview 54 Feed-through 4 mm² / 12 AWG ZS mm² / 10 AWG ZS6 57 ZS6-S and ZS6-4S with and 4 connections mm² / 6 AWG ZS mm² / 4 AWG ZS mm² / AWG ZS mm² / 0 AWG ZS mm² / 0 AWG ZS mm² / 00 AWG ZS mm² / 0000 AWG ZS95 66 Ground 4 mm² / 12 AWG ZS4-PE 67 6 mm² / 10 AWG ZS6-PE 68 ZS6-S-PE and ZS6-4S-PE with and 4 connections mm² / 6 AWG ZS10-PE mm² / 4 AWG ZS16-PE mm² / AWG ZS25-PE 7 5 mm² / 2 AWG ZS5-PE 74 5 mm² ZS5-PEN + neutral mm² / 0 AWG ZS50-PE mm² / 00 AWG ZS70-PE mm² / 0000 AWG ZS95-PE 78 Disconnect with blade 4 mm² / 10 AWG ZS4-S and ZS4-S-T with test ZS4-S-R1 and ZS4-S-T-R1 with test mm² / 10 AWG ZS6-S and ZS6-S-4S-T with test mm² / 6 AWG ZS10-S 85 Disconnect with plug 4 mm² / 10 AWG ZS4-SP and ZS4-SP-T2 with test ZS4-SP-R1 and ZS4-SP-T2-R1 with test mm² / 6 AWG ZS10-SP 90 Fuse and marshalling cabinets application overview 92 For 5x20 and 5x25 mm fuses 4 mm² / 10 AWG ZS4-SF1 and ZS4-SF1-T with test ZS4-SF1-R with fuse indicator and test ZS4-R1 feed-through 98 ZS4-S-R disconnect with lever 99 For 5x20 mm fuses and marshalling cabinets application 4 mm² / 10 AWG ZS4-SF 100 ZS4-SF-T with test 101 ZS4-SF-R with fuse indicator and test ZS4-R2 feed-through 104 ZS4-PE-R2 ground 105 ZS4-S-R2 disconnect with lever 106 For 6.x2 mm fuses (¼ x 1¼ in) 10 mm² / 6 AWG ZS10-SF 107 ZS10-SF-R with fuse indicator 108 ZS10-S-R2 disconnect with lever 109 Double deck 4 mm² / 12 AWG ZS4-D2 and ZS4-D1 2 and 1 feed-through circuits mm² / 10 AWG ZS6-D2 and ZS6-D1 2 and 1 feed-through circuits ZS6-D2-PE 1 feed-through circuit and 1 ground circuit 114 ZS6-D1-PE 1 ground circuit mm² / 10 AWG ZS4-D2-S 1 disconnect circuit and 1 feed-through circuit 116 ZS4-D2-S-T 1 disconnect circuit + test and 1 feed-through circuit 117 ZS4-D2-SF1 1 fuse circuit and 1 feed-through circuit 118 ZS4-D2-SF1-R 1 fuse circuit + fuse indicator and 1 feed-through circuit 119 Triple deck 4 mm² / 12 AWG ZS4-T feed-through circuits mm² / 10 AWG ZS4-T-R1 feed-through circuits 121 Test and measurement Overview mm² / 6 AWG ZS10-ST 126 ZS10-ST-1 for Potential Transformer circuits 127 ZS10-ST-T4 for Current Transformer circuits 128 ZS10-R1 feed-through 129 ZS10-PE-R1 ground 10 Summary_ ABB SNK series - Terminal blocks 49

52 SNK series, terminal blocks Screw clamp technology Rely on our expertise ABB screw clamp technology benefits from 50 years of experience. Billions of our screw clamps have been manufactured and are used worldwide every day. Qualified for worldwide markets and applications Eco-designed according to international environmental standards in sustainable development. RoHS hazloc A smart design to support your daily connection challenges Revitalise your electrical installations Modern. High quality finishing. Improve marking visibility from any direction Asymmetrical design offers the best visibility from any direction, +20% marking surface. Facilitate your rail assembly process Asymmetrical shape: easy to handle, prevents risk of shortcircuit. Stiffness: improved holding adherence to the rail, low deflection when tightening. Locking pin: quick and easy to lock up to ten blocks in position at a time. Best marking visibility from any direction Asymmetrical design offers the best visibility Smooth your connecting process Engineered conductor entry: optimized conductor guiding, easier connection. One or two conductors. Conductors with or without ferrules. Facilitate maintenance operations Terminals can be individually removed from a terminal assembly equipped with markers: ABB markers become independent after strip mounting, ABB markers remain on terminal in any situation. Handwriting possible. Engineered conductor entry Maintenance operations facilitated 1SNK161027S Rev. B 50 ABB SNK series - Terminal blocks

53 "Simply SNK" Find your preferred marking solution from our universal range ABB automatic printing solutions ABB marking systems with blank marker cards (2) and self adhesive strips (1). ABB pre-marking solutions Pre-printed marker cards (2). Manual marking solutions Universal marker holder (UMH), compatible with most of the wire markers available on the market (). Patented "flat marking area", compatible with self-adhesive strips and can be written on with a marker pen (4). Make savings where it counts Reduce your stock value Significant reduction of part numbers to manage. Less terminal blocks and accessories needed to do your electrical installation, number of units per pack suited to the usage. Reduce marking cost With pre-printed marker cards and strip mounting. Zero investment needed using your current tools: adhesive hand label printer, desktop printers, pen. 1SNK161088S Rev. B ABB SNK series - Terminal blocks 51

54 SNK series, terminal blocks Screw clamp technology Range overview from 2.5 to 95 mm² 2 4 Connections Connections Connections Single deck Feed-through Ground Disconnect Fuse Single deck Feed-through Ground Single deck Feed-through Ground Disconnect Double central channels allows multiconfigurations (jumpering, testing and measuring) Circuit separator without spacing loss 52 ABB SNK series - Terminal blocks

55 2x2 Connections 2 Connections x2 Connections Double deck Feed-through Ground Disconnect Fuse Test and measurement Feed-through Ground Disconnect Triple deck Feed-through Plug component holder ABB SNK series - Terminal blocks 5

56 SNK series, terminal blocks Screw clamp technology Feed-through Ground Section 4 mm² 12 AWG ZS4 ZS4-PE 10 AWG 6 mm² 10 AWG ZS6 ZS6-S ZS6-4S ZS6-PE ZS6-S-PE ZS6-4S-PE 10 mm² 6 AWG ZS10 ZS10-PE 16 mm² 4 AWG ZS16 ZS16-PE 25 mm² AWG ZS25 ZS25-PE 5 mm² 0 AWG ZS5 2 AWG ZS5-PE 50 mm² 0 AWG New ZS50 New ZS50-PE 70 mm² 00 AWG ZS70 ZS70-PE 95 mm² 0000 AWG ZS95 ZS95-PE Disconnect with blade Disconnect with plug Section 4 mm² 10 AWG ZS4-S ZS4-S-T2 ZS4-S-R1 ZS4-S-T2-R1 ZS4-SP ZS4-SP-T2 ZS4-SP-R1 ZS4-SP-T2-R1 ZS4-S-T2.-R1 6 mm² 10 AWG ZS6-S ZS6-S-4S-T2 10 mm² 6 AWG ZS10-S ZS10-SP For 5 x 20 mm fuses Aligned for marshalling cabinets application For 6. x 2 mm fuses (¼ x 1¼ in) Aligned Section 4 mm² 10 AWG ZS4-SF ZS4-SF-T2 ZS4-SF-R1 ZS4-SF-R2 ZS4-R2 ZS4-PE-R2 ZS4-S-R2 ZS4-SF-R ZS4-SF-R4 10 mm² 6 AWG ZS10-SF ZS10-SF-R1 ZS10-S-R2 ZS10-SF-R Clamp - Channels for jumpering or testing - Test socket - Blown-fuse indicator 1SNK161066S ABB SNK series - Terminal blocks

57 Double deck Feed-through Ground Disconnect with blade For 5 x 20 mm and 5 x 25 mm fuses Triple deck Feed-through ZS4-D2 ZS4-D1 ZS4-T ZS4-D2-S ZS4-D2-S-T2 ZS4-D2-SF1 ZS4-D2-SF1-R1 ZS4-T-R1 ZS4-D2-SF-R ZS6-D2 ZS6-D1 ZS6-D2-PE ZS6-D1-PE Test disconnect with sliding link Test & measurement Aligned with ZS10-ST ZS10-ST ZS10-ST-T4 ZS10-R1 ZS10-PE-R1 ZS10-ST-1 For 5 x 20 mm and 5 x 25 mm fuses Feed-through aligned with ZS4-SF1 ZS4-SF1 ZS4-SF1-T2 ZS4-SF1-R1 ZS4-SF1-R2 ZS4-R1 ZS4-S-R ZS4-SF1-R ZS4-SF1-R4 1SNK161066S0201 ABB SNK series - Terminal blocks 55

58 ZS4 screw clamp terminal blocks Feed-through mm in spacing ZS " " 5.2 mm in spacing 4 mm² 12 AWG " " 1SNK161001F0014 Save space by connecting conductors up to 4 mm² (without insulated ferrule, CB certified) 12 AWG in just 5.2 mm in spacing, Perfectly adapted to solar applications: voltage is rated 1000 V AC / DC IEC. Feed-through Grey ZS4 1SNK505010R Blue ZS4-BL 1SNK505020R Orange ZS4-OR 1SNK50500R Yellow ZS4-YL 1SNK505060R Green ZS4-GN 1SNK505061R Red ZS4-RD 1SNK505062R Purple ZS4-PR 1SNK50506R Brown ZS4-BR 1SNK505064R White ZS4-WH 1SNK505065R Black ZS4-BK 1SNK505066R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors per clamp Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 2 A / 4 mm² 20 A / 12 AWG Rated short-time withstand current (1s) 480 A Torque 0.6 N.m ± 0.1 Short Circuit Current Rating (with specific conditions) 100 ka 5.1 lb.in ± Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 2 A IEC/EN IM2 II 2 GD Ex eb I/II/IIIC 600 V 20 A UL Class I, Zone I, AEx e II The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BR-Ex e II Haz Loc BV DNV Rina End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES4 1SNK505910R Jumper bars 2 poles Orange JB5-2 1SNK90502R poles JB5-1SNK9050R poles JB5-4 1SNK90504R poles JB5-5 1SNK90505R poles JB5-10 1SNK90510R poles JB5-50 1SNK90550R Cross spacing jumpers Orange JB85-1SNK90060R Circuit separators 0 mm 0 in Dark grey CS 1SNK900101R mm in CS-R1 1SNK90010R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Shield connectors SHBS 1SNK900600R Protecting covers 5.2 mm in spacing Transparent PL5 1SNK900618R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground screw clamp terminal blocks Ground Profile aligned with ZS4 Green-yellow ZS4-PE 1SNK505150R Technical data valid for copper conductors only. 56 ABB SNK series - Terminal blocks 1SNK161001S Rev. D

59 ZS6 screw clamp terminal blocks Feed-through - 6 mm 0.26 in spacing ZS " " 6 mm 0.26 in spacing 6 mm² 10 AWG " " 1SNK161011F0014 Save space by connecting conductors up to 6 mm² (without insulated ferrule, CB certified) 10 AWG in just 6 mm 0.26 in spacing, Perfectly adapted to solar applications: voltage is rated 1000 V AC / DC IEC. Feed-through Grey ZS6 1SNK506010R Blue ZS6-BL 1SNK506020R Orange ZS6-OR 1SNK50600R Yellow ZS6-YL 1SNK506060R Green ZS6-GN 1SNK506061R Red ZS6-RD 1SNK506062R Purple ZS6-PR 1SNK50606R Brown ZS6-BR 1SNK506064R White ZS6-WH 1SNK506065R Black ZS6-BK 1SNK506066R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A4-B 2 conductors per clamp Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver Flexible mm² Ø 4 mm with twin ferrule mm² AWG Ø in Rated current / Rated cross section 41 A / 6 mm² 0 A / 10 AWG Rated short-time withstand current (1s) 720 A Torque 0.85 N.m ± 0.15 Short Circuit Current Rating (with specific conditions) 100 ka 7.52 lb.in ± 1. Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 41 A IEC/EN IM2 II 2 GD Ex eb I/II/IIIC 600 V 0 A UL Class I, Zone I, AEx e II The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website CE CB RoHS USR CNR CSA EAC ATEX IECEx BR-Ex e II Haz Loc BV DNV Rina 1 End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES4 1SNK505910R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R poles JB6-50 1SNK90650R Cross spacing jumpers Orange JB85-1SNK90060R Circuit separators 0 mm 0 in Dark grey CS 1SNK900101R mm in CS-R1 1SNK90010R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Shield connectors SHBS 1SNK900600R Protecting covers 6 mm 0.26 in spacing Transparent PL6 1SNK900619R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground screw clamp terminal blocks Ground Profile aligned with ZS6 Green-yellow ZS6-PE 1SNK506150R Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 57 1SNK161008S Rev. D

60 ZS6-S screw clamp terminal blocks Feed-through with connections - 6 mm 0.26 in spacing 6 mm² 10 AWG Recommended for energy markets and highly demanding applications requiring that only one conductor be connected per clamp, These blocks offer a high density connecting capacity (up to connections) in a low profile and just 6 mm 0.26 in spacing. 1SNK161075V0014 Feed-through Grey ZS6-S 1SNK506011R Blue ZS6-S-BL 1SNK506021R Yellow ZS6-S-YL 1SNK506067R ZS6-S " " 6 mm 0.26 in spacing " " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.41 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A4-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø 4 mm with twin ferrule mm² AWG Ø in Rated current / Rated cross section 2 A / 4 mm² 0 A / 10 AWG Maximum current / Maximum cross section 9 A / 6 mm² Rated short-time withstand current (1s) 480 A Torque 0.75 N.m ± 0.05 Short Circuit Current Rating (with specific conditions) 100 ka 6.64 lb.in ± 0.44 Rated voltage 800 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 550 V 29 A IEC/EN IM2 II 2 GD Ex eb I/II/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CSA EAC ATEX IECEx BV End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES6-S 1SNK505912R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R poles JB6-50 1SNK90650R Cross spacing jumpers Orange JB85-1SNK90060R Circuit separators 0 mm 0 in Dark grey CS 1SNK900101R mm in CS-R1 1SNK90010R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground screw clamp terminal blocks Ground Profile aligned with ZS6-S Green-yellow ZS6-S-PE 1SNK506151R Technical data valid for copper conductors only. 58 ABB SNK series - Terminal blocks 1SNK161067S Rev. A

61 ZS6-4S screw clamp terminal blocks Feed-through with 4 connections - 6 mm 0.26 in spacing 6 mm² 10 AWG High density wiring (one potential distribution on 4 independent screw clamps) in a very low profile and just 6 mm 0.26 in spacing, Recommended for energy markets and highly demanding applications requiring that only one conductor be connected per clamp. 1SNK161078V0014 Feed-through Grey ZS6-4S 1SNK506012R Blue ZS6-4S-BL 1SNK506022R Yellow ZS6-4S-YL 1SNK506068R ZS6-4S " " 6 mm 0.26 in spacing " " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.41 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A4-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø 4 mm with twin ferrule mm² AWG Ø in Rated current / Rated cross section 2 A / 4 mm² 0 A / 10 AWG Maximum current / Maximum cross section 9 A / 6 mm² Rated short-time withstand current (1s) 480 A Torque 0.75 N.m ± 0.05 Short Circuit Current Rating (with specific conditions) 100 ka 6.64 lb.in ± 0.44 Rated voltage 800 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 550 V 29 A IEC/EN IM2 II 2 GD Ex eb I/II/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CSA EAC ATEX IECEx BV End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES6-4S 1SNK505911R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R poles JB6-50 1SNK90650R Cross spacing jumpers Orange JB85-1SNK90060R Circuit separators 0 mm 0 in Dark grey CS 1SNK900101R mm in CS-R1 1SNK90010R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground screw clamp terminal blocks Ground Profile aligned with ZS6-4S Green-yellow ZS6-4S-PE 1SNK506152R Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 59 1SNK161068S Rev. A

62 ZS10 screw clamp terminal blocks Feed-through - 8 mm 0.15 in spacing 10 mm² 6 AWG ZS " " 8 mm 0.15 in spacing " " 1SNK161008F0014 Save space by connecting conductors up to 10 mm² (without insulated ferrule, CB certified) 6 AWG in just 8 mm 0.15 in spacing, Perfectly adapted to solar applications: voltage is rated 1000 V AC / DC IEC. Feed-through Grey ZS10 1SNK508010R Blue ZS10-BL 1SNK508020R Orange ZS10-OR 1SNK50800R Yellow ZS10-YL 1SNK508060R Green ZS10-GN 1SNK508061R Red ZS10-RD 1SNK508062R Purple ZS10-PR 1SNK50806R Brown ZS10-BR 1SNK508064R White ZS10-WH 1SNK508065R Black ZS10-BK 1SNK508066R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 12 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A5-B5 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø 4 mm with twin ferrule mm² AWG Ø in Rated current / Rated cross section 57 A / 10 mm² 42 A / 6 AWG Rated short-time withstand current (1s) 1200 A Torque 1. N.m ± 0. Short Circuit Current Rating (with specific conditions) 100 ka 11.5 lb.in ± 2.65 Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 57 A IEC/EN IM2 II 2 GD Ex eb I/II/IIIC 600 V 42 A UL Class I, Zone I, AEx e II The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BR-Ex e II Haz Loc BV DNV Rina End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES4 1SNK505910R Jumper bars 2 poles Orange JB8-2 1SNK90802R poles JB8-1SNK9080R poles JB8-4 1SNK90804R poles JB8-5 1SNK90805R poles JB8-10 1SNK90810R Cross spacing jumpers Orange JB85-1SNK90060R Circuit separators 0 mm 0 in Dark grey CS 1SNK900101R mm in CS-R1 1SNK90010R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Spacers 2.8 mm in Dark grey ES-TC8 1SNK900104R Protecting covers 8 mm 0.15 in spacing Transparent PL8 1SNK900620R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground screw clamp terminal blocks Ground Profile aligned with ZS10 Green-yellow ZS10-PE 1SNK508150R Technical data valid for copper conductors only. 60 ABB SNK series - Terminal blocks 1SNK161004S Rev. D

63 ZS16 screw clamp terminal blocks Feed-through - 10 mm 0.94 in spacing 16 mm² 4 AWG Save space by connecting conductors up to 16 mm² (without insulated ferrule, CB certified) 4 AWG in just 10 mm 0.94 in spacing, Perfectly adapted to solar applications: voltage is rated 1000 V AC / DC IEC. Feed-through Grey ZS16 1SNK510010R Blue ZS16-BL 1SNK510020R Orange ZS16-OR 1SNK51000R ZS " " 10 mm 0.94 in spacing " " 1SNK161006F0014 Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 14 mm per clamp Flexible mm² length 0.51 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A6-B6 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø 5.5 mm with twin ferrule mm² AWG Ø in Rated current / Rated cross section 76 A / 16 mm² 67 A / 4 AWG Rated short-time withstand current (1s) 1920 A Torque 1.8 N.m ± 0.2 Short Circuit Current Rating (with specific conditions) 100 ka 15.9 lb.in ± 1.77 Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 76 A IEC/EN IM2 II 2 GD Ex eb I/II/IIIC 600 V 67 A UL Class I, Zone I, AEx e II The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BR-Ex e II Haz Loc BV DNV Rina End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES4 1SNK505910R Jumper bars 2 poles Orange JB10-2 1SNK91002R poles JB10-1SNK9100R poles JB10-4 1SNK91004R poles JB10-5 1SNK91005R poles JB SNK91010R Cross spacing jumpers Orange JB85-1SNK90060R Circuit separators 0 mm 0 in Dark grey CS 1SNK900101R mm in CS-R1 1SNK90010R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Protecting covers 10 mm 0.94 in spacing Transparent PL10 1SNK900621R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground screw clamp terminal blocks Ground Profile aligned with ZS16 Green-yellow ZS16-PE 1SNK510150R Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 61 1SNK161017S Rev. D

64 ZS25 screw clamp terminal blocks Feed-through - 12 mm in spacing 25 mm² AWG Save space by connecting conductors up to 25 mm² (without insulated ferrule, CB certified) AWG in just 12 mm in spacing, Perfectly adapted to solar applications: voltage is rated 1000 V AC / DC IEC. Feed-through Grey ZS25 1SNK512010R Blue ZS25-BL 1SNK512020R Yellow ZS25-YL 1SNK512060R ZS " " 12 mm in spacing " " 1SNK161081V0014 Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 14 mm per clamp Flexible mm² length 0.51 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A6-B6 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø 5.5 mm with twin ferrule mm² AWG Ø in Rated current / Rated cross section 76 A / 16 mm² 100 A / AWG Maximum current / Maximum cross section 101 A / 25 mm² Rated short-time withstand current (1s) 1920 A Torque 1.8 N.m ± 0.2 Short Circuit Current Rating (with specific conditions) 100 ka 15.9 lb.in ± 1.77 Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 69 A IEC/EN IM2 II 2 GD Ex eb I/II/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BV End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES4 1SNK505910R Jumper bars 2 poles Orange JB12-2 1SNK91202R poles JB12-1SNK9120R poles JB12-5 1SNK91205R Cross spacing jumpers Orange JB85-1SNK90060R Circuit separators 0 mm 0 in Dark grey CS 1SNK900101R mm in CS-R1 1SNK90010R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Protecting covers 10 mm 0.94 in spacing Transparent PL10 1SNK900621R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground screw clamp terminal blocks Ground Profile aligned with ZS25 Green-yellow ZS25-PE 1SNK512150R Technical data valid for copper conductors only. 62 ABB SNK series - Terminal blocks 1SNK161078S Rev. A

65 ZS5 screw clamp terminal blocks Feed-through - 16 mm 0.60 in spacing 5 mm² 0 AWG Closed terminal block: No end section needed, Optimized rigidity, Perfectly adapted to solar applications: voltage is rated 1000 V AC / DC IEC. 1SNK161004F0014 Feed-through Closed block Grey ZS5 1SNK516010R Blue ZS5-BL 1SNK516020R Orange ZS5-OR 1SNK51600R ZS " 4 1.4" 16 mm 0.60 in spacing " " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 17 mm per clamp Flexible mm² length in with non insulated ferrule 4 5 mm² 10 2 AWG with insulated ferrule 4 5 mm² AWG Gauge A9-B9 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø 6.5 mm with twin ferrule 4 10 mm² 12 8 AWG Ø in Rated current / Rated cross section 125 A / 5 mm² 150 A / 0 AWG Rated short-time withstand current (1s) 4200 A Torque 2.9 N.m ± 0.1 Short Circuit Current Rating (with specific conditions) 100 ka 25.7 lb.in ± Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 69 V 125 A IEC/EN IM2 II 2 GD Ex eb I/II/IIIC 600 V 150 A UL Class I, Zone I, AEx e II The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CSA EAC ATEX IECEx BR-Ex e II Haz Loc BV DNV Rina End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R Jumper bars 2 poles Orange JB16-2 1SNK91602R poles JB16-1SNK9160R poles JB16-4 1SNK91604R poles JB16-5 1SNK91605R poles JB SNK91610R Circuit separators mm in Dark grey CS-R1 1SNK90010R Protecting covers 16 mm 0.60 in spacing Transparent PL16 1SNK900622R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground screw clamp terminal blocks Ground Screw rail connection Green-yellow ZS5-PE 1SNK516150R Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 6 1SNK161019S Rev. E

66 ZS50 screw clamp terminal blocks Feed-through - 16 mm 0.60 in spacing 50 mm² 0 AWG Combine high performance with compact dimensions: Connect conductors up to 50 mm² (CB certified) 0 AWG in just 16 mm 0.60 in spacing, Perfectly adapted to solar applications: 1250 V DC (1000 V AC) IEC and 1000 V UL, Closed terminal block: no end section needed, optmized rigidity. 1SNK161084V0014 Feed-through Closed block Grey ZS50 1SNK516011R Blue ZS50-BL 1SNK516021R Yellow ZS50-YL 1SNK516060R ZS " " 16 mm 0.60 in spacing " " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded 1 50 mm² 18 0 AWG Wire stripping 17 mm per clamp Flexible 1 50 mm² length in with non insulated ferrule 1 50 mm² 18 0 AWG with insulated ferrule 1 50 mm² 18 0 AWG Gauge Dia.11 2 conductors Rigid - Solid / Stranded 1 25 mm² 18 4 AWG Tool Flat screwdriver per clamp Flexible 1 25 mm² Ø 6.5 mm with twin ferrule 1 16 mm² 18 4 AWG Ø in Rated current / Rated cross section 150 A / 50 mm² 140 A / 0 AWG Rated short-time withstand current (1s) 6000 A Torque N.m ± 0.50 Short Circuit Current Rating (with specific conditions) 100 ka 26.6 lb.in ± 4.4 Rated voltage 1000 V 1000 V Impulse withstand voltage 8000 V Protection IP10 NEMA 1 Increased safety Ex e 880 V 150 A IEC/EN IM2 II 2 GD Ex eb I/II/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CSA EAC ATEX IECEx BV End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R Jumper bars 2 poles Orange JB16-2 1SNK91602R poles JB16-1SNK9160R poles JB16-4 1SNK91604R poles JB16-5 1SNK91605R poles JB SNK91610R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground screw clamp terminal blocks Ground Profile aligned with ZS50 Green-yellow ZS50-PE 1SNK516151R Technical data valid for copper conductors only. 64 ABB SNK series - Terminal blocks 1SNK161069S Rev. A

67 ZS70 screw clamp terminal blocks Feed-through - 22 mm in spacing 70 mm² 00 AWG Closed terminal block: No end section needed, Optimized rigidity, Perfectly adapted to solar applications: 1250 V DC (1000 V AC) IEC and 1000 V UL. 1SNK161044F0014 Feed-through Closed block Grey ZS70 1SNK522010R Blue ZS70-BL 1SNK522020R Yellow ZS70-YL 1SNK522060R ZS " " 22 mm in spacing " " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 25 mm per clamp Flexible mm² length in with non insulated ferrule mm² with insulated ferrule mm² Gauge B11 2 conductors Rigid - Solid / Stranded mm² AWG Tool Allen key per clamp Flexible mm² Ø 6 mm with twin ferrule 16 mm² 6 AWG Ø 0.26 in Rated current / Rated cross section 192 A / 70 mm² 159 A / 00 AWG Rated short-time withstand current (1s) 8400 A Torque 6.5 N.m ± 0.5 Short Circuit Current Rating (with specific conditions) 100 ka 57.5 lb.in ± 4.4 Rated voltage 1000 V 1000 V Impulse withstand voltage 8000 V Protection IP10 NEMA 1 Increased safety Ex e 69 V 192 A IEC/EN IM2 II 2 GD Ex eb I/II/IIIC 600 V 159 A UL Class I, Zone I, AEx e II The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BR-Ex e II Haz Loc BV DNV Rina End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R Jumper bars 2 poles JB22-2 1SNK92202R poles JB22-1SNK9220R poles JB22-5 1SNK92205R poles JB SNK92210R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground screw clamp terminal blocks Ground Screw rail connection Green-yellow ZS70-PE 1SNK522150R Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 65 1SNK161021S Rev. D

68 ZS95 screw clamp terminal blocks Feed-through - 26 mm in spacing 95 mm² 0000 AWG Closed terminal block: No end section needed, Optimized rigidity, Perfectly adapted to solar applications: 1250 V DC (1000 V AC) IEC and 1000 V UL. 1SNK161025F0014 Feed-through Closed block Grey ZS95 1SNK526010R Blue ZS95-BL 1SNK526020R Yellow ZS95-YL 1SNK526060R ZS " " 26 mm in spacing 87.4" " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 26 mm per clamp Flexible mm² length in with non insulated ferrule mm² with insulated ferrule mm² Gauge B12 2 conductors Rigid - Solid / Stranded mm² AWG Tool Allen key per clamp Flexible mm² Ø 6 mm with twin ferrule 16 mm² 6 AWG Ø 0.26 in Rated current / Rated cross section 22 A / 95 mm² 20 A / 0000 AWG Rated short-time withstand current (1s) A Torque 9.25 N.m ± 0.25 Short Circuit Current Rating (with specific conditions) 100 ka 81.7 lb.in ± 2.21 Rated voltage 1000 V 1000 V Impulse withstand voltage 8000 V Protection IP10 NEMA 1 Increased safety Ex e 69 V 22 A IEC/EN IM2 II 2 GD Ex eb I/II/IIIC 600 V 20 A UL Class I, Zone I, AEx e II The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CSA EAC ATEX IECEx BR-Ex e II Haz Loc BV DNV Rina End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R Jumper bars 2 poles JB26-2 1SNK92602R poles JB26-1SNK9260R poles JB26-5 1SNK92605R poles JB SNK92610R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Ground screw clamp terminal blocks Ground Screw rail connection Green-yellow ZS95-PE 1SNK526150R Technical data valid for copper conductors only. 66 ABB SNK series - Terminal blocks 1SNK16102S Rev. D

69 ZS4-PE screw clamp terminal blocks Ground mm in spacing 4 mm² 12 AWG Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: Rail contact non operator dependent, Performances above the requirements of IEC terminal block standard, Secured snap on or remove from the rail. ZS4-PE " " " 1SNK161018F0014 Ground Screwless rail connection Green-yellow ZS4-PE 1SNK505150R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B Tool Flat screwdriver Ø.5 mm Ø 0.18 in Rated cross section 4 mm² 12 AWG Rated short-time withstand current (1s) 480 A 96 A Torque 0.6 N.m ± lb.in ± End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES4 1SNK505910R Circuit separators mm in Dark grey CS-R1 1SNK90010R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161002S Rev. D Protection IP20 NEMA " 5.2 mm in spacing Explosive atmosphere classification IM2 II 2 GD Ex eb I/II/IIIC Class I, Zone I, AEx e II The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BR-Ex e II Haz Loc BV DNV Rina Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 67

70 ZS6-PE screw clamp terminal blocks Ground - 6 mm 0.26 in spacing 6 mm² 10 AWG Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: Rail contact non operator dependent, Performances above the requirements of IEC terminal block standard, Secured snap on or remove from the rail. ZS6-PE " 1SNK161017F " " Ground Screwless rail connection Green-yellow ZS6-PE 1SNK506150R End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES4 1SNK505910R Circuit separators mm in Dark grey CS-R1 1SNK90010R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161015S Rev. D Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A4-B Tool Flat screwdriver Ø 4 mm Ø in Rated cross section 6 mm² 10 AWG Rated short-time withstand current (1s) 720 A 66 A Torque 0.85 N.m ± lb.in ± 1. Protection IP20 NEMA " 6 mm 0.26 in spacing Explosive atmosphere classification IM2 II 2 GD Ex eb I/II/IIIC Class I, Zone I, AEx e II The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BR-Ex e II Haz Loc BV DNV Rina Technical data valid for copper conductors only. 68 ABB SNK series - Terminal blocks

71 ZS6-S-PE screw clamp terminal blocks Ground with connections - 6 mm 0.26 in spacing 6 mm² 10 AWG Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: rail contact non operator dependent, secured snap on or off the rail, Same profile as ZS6-S for aligned marking and identical end section. ZS6-S-PE " " " 1SNK161090V0014 Ground Screwless rail connection Green-yellow ZS6-S-PE 1SNK506151R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.41 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A4-B Tool Flat screwdriver Ø 4 mm Ø in Rated cross section 4 mm² 10 AWG Maximum cross section 6 mm² Torque 0.75 N.m ± 0.05 Rated short-time withstand current (1s) 480 A 66 A 6.64 lb.in ± 0.44 Maximum short-time withstand current (1s) 480 A Protection IP20 NEMA End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES6-S 1SNK505912R Circuit separators mm in Dark grey CS-R1 1SNK90010R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161080S Rev. A " 6 mm 0.26 in spacing Explosive atmosphere classification IM2 II 2 GD Ex eb I/II/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CSA EAC ATEX IECEx BV Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 69

72 ZS6-4S-PE screw clamp terminal blocks Ground with 4 connections - 6 mm 0.26 in spacing 6 mm² 10 AWG Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: rail contact non operator dependent, secured snap on or off the rail, Same profile as ZS6-4S for aligned marking and identical end section. ZS6-4S-PE " " " 1SNK161091V0014 Ground Screwless rail connection Green-yellow ZS6-4S-PE 1SNK506152R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.41 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A4-B Tool Flat screwdriver Ø 4 mm Ø in Rated cross section 4 mm² 10 AWG Maximum cross section 6 mm² Torque 0.75 N.m ± 0.05 Rated short-time withstand current (1s) 480 A 66 A 6.64 lb.in ± 0.44 Maximum short-time withstand current (1s) 480 A End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES6-4S 1SNK505911R Circuit separators mm in Dark grey CS-R1 1SNK90010R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161081S Rev. A Protection IP20 NEMA " 6 mm 0.26 in spacing Explosive atmosphere classification IM2 II 2 GD Ex eb I/II/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CSA EAC ATEX IECEx BV Technical data valid for copper conductors only. 70 ABB SNK series - Terminal blocks

73 ZS10-PE screw clamp terminal blocks Ground - 8 mm 0.15 in spacing 10 mm² 6 AWG Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: Rail contact non operator dependent, Performances above the requirements of IEC terminal block standard, Secured snap on or remove from the rail. 1SNK161016F0014 Ground Screwless rail connection Green-yellow ZS10-PE 1SNK508150R Connecting capacity IEC UL - CSA Rail TH 5-15 ZS10-PE " " 8 mm 0.15 in spacing " End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES4 1SNK505910R Jumper bars 2 poles Orange JB8-2 1SNK90802R Circuit separators mm in Dark grey CS-R1 1SNK90010R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161016S Rev. D 1 conductor Rigid - Solid / Stranded mm² AWG Wire stripping 12 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A5-B5 Tool Flat screwdriver Ø 4 mm Ø in Rated cross section 10 mm² 6 AWG Rated short-time withstand current (1s) 1200 A 1596 A Torque 1. N.m ± lb.in ± 2.65 Protection IP20 NEMA 1 Explosive atmosphere classification IM2 II 2 GD Ex eb I/II/IIIC Class I, Zone I, AEx e II The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BR-Ex e II Haz Loc BV DNV Rina Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 71

74 ZS16-PE screw clamp terminal blocks Ground - 10 mm 0.94 in spacing 16 mm² 4 AWG Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: Rail contact non operator dependent, Performances above the requirements of IEC terminal block standard, Secured snap on or remove from the rail, PE.N function available by combining ZS16-PE with ZS16-BL and 2 poles jumper bar JB SNK161019F0014 Ground Screwless rail connection Green-yellow ZS16-PE 1SNK510150R Connecting capacity IEC UL - CSA Rail TH 5-15 ZS16-PE End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES4 1SNK505910R Jumper bars 2 poles Orange JB10-2 1SNK91002R Circuit separators mm in Dark grey CS-R1 1SNK90010R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161018S Rev. D " " 1 conductor Rigid - Solid / Stranded mm² AWG Wire stripping 14 mm per clamp Flexible mm² length 0.51 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A6-B6 Tool Flat screwdriver Ø 5.5 mm Ø in Rated cross section 16 mm² 4 AWG Rated short-time withstand current (1s) 1920 A 2544 A Torque 1.8 N.m ± lb.in ± " 10 mm 0.94 in spacing Protection IP20 NEMA 1 Explosive atmosphere classification IM2 II 2 GD Ex eb I/II/IIIC Class I, Zone I, AEx e II The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BR-Ex e II Haz Loc BV DNV Rina Technical data valid for copper conductors only. 72 ABB SNK series - Terminal blocks

75 ZS25-PE screw clamp terminal blocks Ground - 12 mm in spacing 25 mm² AWG Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: rail contact non operator dependent, secured snap on or off the rail, Same profile as ZS25 for aligned marking and identical end section. ZS25-PE " " " 1SNK161092V0014 Ground Screwless rail connection Green-yellow ZS25-PE 1SNK512150R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 14 mm per clamp Flexible mm² length 0.51 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A6-B6 Tool Flat screwdriver Ø 5.5 mm Ø in Rated cross section 16 mm² AWG Maximum cross section 25 mm² Torque 1.8 N.m ± 0.2 Rated short-time withstand current (1s) 1920 A 204 A 15.9 lb.in ± 1.77 Maximum short-time withstand current (1s) 000 A Protection IP20 NEMA End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES4 1SNK505910R Circuit separators mm in Dark grey CS-R1 1SNK90010R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161082S Rev. A " Explosive atmosphere classification IM2 II 2 GD Ex eb I/II/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. 12 mm in spacing CE CB RoHS USR CNR CSA EAC ATEX IECEx BV Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 7

76 ZS5-PE screw clamp terminal blocks Ground - 16 mm 0.60 in spacing 5 mm² 2 AWG Reliable electrical and mechanical contact with the rail that exceeds the requirements of IEC terminal block standard. 1SNK161005F0014 Ground Screw rail connection Green-yellow ZS5-PE 1SNK516150R Connecting capacity IEC UL - CSA Rail TH 5-15 ZS5-PE " " End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R Circuit separators mm in Dark grey CS-R1 1SNK90010R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161020S Rev. E 1 conductor per clamp Rigid - Solid / Stranded mm² AWG Wire stripping 17 mm Flexible mm² length in with non insulated ferrule 4 5 mm² 10 2 AWG with insulated ferrule 4 5 mm² AWG Tool Flat screwdriver Gauge A9 Screw clamp Ø 6.5 mm Ø in Rail connection screw Ø 5.5 mm Ø in Rated cross section 5 mm² 2 AWG Rated short-time withstand current (1s) 4200 A 402 A Torque Screw clamp 2.65 N.m ± lb.in ± 1. Rail connection 1.6 N.m ± 0.15 Protection IP20 NEMA 1 screw 14.2 lb.in ± 1. Explosive atmosphere classification IM2 II 2 GD Ex eb I/II/IIIC Class I, Zone I, AEx e II The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CSA EAC ATEX IECEx BR-Ex e II Haz Loc BV DNV Rina 4 1.4" 16 mm 0.60 in spacing 74 ABB SNK series - Terminal blocks Technical data valid for copper conductors only.

77 ZS5-PEN screw clamp terminal blocks Ground + neutral - 2 mm in spacing N 5 mm² Simplify your PE.N connection with ZS5-PE block connected to ZS5-BL through a pre-mounted jumper. ZS5-PEN " " 1SNK16106F0014 Ground + neutral Green-yellow ZS5-PEN 1SNK516170R Connecting capacity IEC UL - CSA Rail TH conductor per clamp Rigid - Solid / Stranded mm² Wire stripping 17 mm Flexible mm² length in with non insulated ferrule mm² with insulated ferrule mm² Tool Flat screwdriver Gauge A9 Screw clamp Ø 6.5 mm Ø in Rail connection screw Ø 5.5 mm Ø in 5 mm² Rated cross section Rated short-time withstand current (1s) 4200 A Torque Screw clamp 2.65 N.m ± lb.in ± End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161047S Rev. D Rail connection 1.6 N.m ± 0.15 Protection IP10 screw 14.2 lb.in ± 1. The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE RoHS EAC 4 1.4" 2 mm in spacing Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 75

78 ZS50-PE screw clamp terminal blocks Ground - 16 mm 0.60 in spacing 50 mm² 0 AWG Reliable electrical and mechanical contact with the rail that exceeds the requirements of the IEC terminal block standard. ZS50-PE " " " 1SNK16109V End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161070S Rev. B Ground Screw rail connection Green-yellow ZS50-PE 1SNK516151R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded 1 50 mm² 18 0 AWG Wire stripping 17 mm per clamp Flexible 1 50 mm² length in with non insulated ferrule 1 50 mm² 18 0 AWG with insulated ferrule 1 50 mm² 18 0 AWG Tool Flat screwdriver Gauge Dia.11 Screw clamp Ø 6.5 mm Ø in Rail connection screw Ø 6.5 mm Ø in Rated cross section 50 mm² 0 AWG Rated short-time withstand current (1s) 6000 A 6420 A Torque Screw clamp N.m ± lb.in ± 4.4 Rail connection N.m ± 0.25 Protection IP10 NEMA 1 screw lb.in ± 2.21 Explosive atmosphere classification IM2 II 2 GD Ex eb I/II/IIIC The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website " CE CB RoHS USR CSA EAC ATEX IECEx BV 16 mm 0.60 in spacing Technical data valid for copper conductors only. 76 ABB SNK series - Terminal blocks

79 ZS70-PE screw clamp terminal blocks Ground - 22 mm in spacing 70 mm² 00 AWG Reliable electrical and mechanical contact with the rail that exceeds the requirements of IEC terminal block standard. ZS70-PE " " 1SNK161045F0014 Ground Screw rail connection Green-yellow ZS70-PE 1SNK522150R Connecting capacity IEC UL - CSA Rail TH conductor per clamp End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161022S Rev. D Rigid - Solid / Stranded mm² AWG Wire stripping 25 mm Flexible mm² length in with non insulated ferrule mm² with insulated ferrule mm² Tool Allen key Gauge B11 Screw clamp Ø 6 mm Ø 0.26 in Rail connection screw Ø 4 mm Ø in Rated cross section 70 mm² 00 AWG Rated short-time withstand current (1s) 8400 A 8088 A Torque Screw clamp 6.5 N.m ± lb.in ± 4.4 Rail connection 1.9 N.m ± 0.1 Protection IP10 NEMA 1 screw lb.in ± Explosive atmosphere classification IM2 II 2 GD Ex eb I/II/IIIC Class I, Zone I, AEx e II The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BR-Ex e II Haz Loc BV DNV Rina " 22 mm in spacing Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 77

80 ZS95-PE screw clamp terminal blocks Ground - 26 mm in spacing 95 mm² 0000 AWG Reliable electrical and mechanical contact with the rail that exceeds the requirements of IEC terminal block standard. 1SNK161024F0014 Ground Screw rail connection Green-yellow ZS95-PE 1SNK526150R Connecting capacity IEC UL - CSA Rail TH 5-15 ZS95-PE End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161024S Rev. D 87.4" 87.4" 1 conductor per clamp Rigid - Solid / Stranded mm² AWG Wire stripping 26 mm Flexible mm² length in with non insulated ferrule mm² with insulated ferrule mm² Tool Allen key Gauge B12 Screw clamp Ø 6 mm Ø 0.26 in Rail connection screw Ø 4 mm Ø in Rated cross section 95 mm² 0000 AWG Rated short-time withstand current (1s) A A Torque Screw clamp 9.25 N.m ± lb.in ± 2.2 Rail connection 1.9 N.m ± 0.1 Protection IP10 NEMA 1 screw lb.in ± Explosive atmosphere classification IM2 II 2 GD Ex eb I/II/IIIC Class I, Zone I, AEx e II The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BR-Ex e II Haz Loc BV DNV Rina " 26 mm in spacing Technical data valid for copper conductors only. 78 ABB SNK series - Terminal blocks

81 ZS4-S screw clamp terminal blocks Disconnect with blade mm in spacing 4 mm² 10 AWG Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver, Same profile as ZS4 feed-through terminal block for aligned marking and identical end section use. ZS4-S " 1SNK161002F0014 Disconnect Profile aligned with ZS4 Grey ZS4-S 1SNK50510R Blue ZS4-S-BL 1SNK50520R Orange ZS4-S-OR 1SNK5050R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 25 A / 4 mm² 25 A / 10 AWG " " " " End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES4 1SNK505910R Circuit separators mm in Dark grey CS-R1 1SNK90010R Shield connectors SHBS 1SNK900600R Protecting covers 5.2 mm in spacing Transparent PL5 1SNK900618R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161010S Rev. D Rated short-time withstand current (1s) 480 A Torque 0.6 N.m ± lb.in ± Rated voltage 400 V 150 V Impulse withstand voltage 6000 V Protection IP20 NEMA " 5.2 mm in spacing Recommendation for best usage: in horizontal assemblies, disconnect terminal blocks should be mounted with fixed foot on top (power side) so that the disconnect knife does not partially close through gravity. Furthermore, as specified per IEC , disconnect terminal blocks are intended to be used for temporary disconnection at zero potential and at no load. The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV DNV Rina Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 79

82 ZS4-S-T screw clamp terminal blocks Disconnect with blade - with test socket mm in spacing 4 mm² 10 AWG Ease your test operations with the 2 built-in test sockets, Screwdriver or hand operated disconnect blade, Same profile as ZS4 feed-through terminal block for aligned marking and identical end section use. ZS4-S-T " " " " " " 1SNK16104F End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES4 1SNK505910R Circuit separators mm in Dark grey CS-R1 1SNK90010R Shield connectors SHBS 1SNK900600R Protecting covers 5.2 mm in spacing Transparent PL5 1SNK900618R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161042S Rev. D Disconnect Profile aligned with ZS4, with 2 test Grey ZS4-S-T2 1SNK50511R sockets DIA 2 mm in Blue ZS4-S-T2-BL 1SNK50521R Orange ZS4-S-T2-OR 1SNK5051R Profile aligned with ZS4, with 2 test sockets DIA 2. mm in Grey ZS4-S-T2. 1SNK50512R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 25 A / 4 mm² 25 A / 10 AWG Rated short-time withstand current (1s) 480 A Torque 0.6 N.m ± lb.in ± Rated voltage 400 V 150 V Impulse withstand voltage 6000 V Protection IP20 NEMA mm in spacing Recommendation for best usage: in horizontal assemblies, disconnect terminal blocks should be mounted with fixed foot on top (power side) so that the disconnect knife does not partially close through gravity. Furthermore, as specified per IEC , disconnect terminal blocks are intended to be used for temporary disconnection at zero potential and at no load. The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE RoHS USR CNR CSA EAC Technical data valid for copper conductors only. 80 ABB SNK series - Terminal blocks

83 ZS4-S-R1 screw clamp terminal blocks Disconnect with blade - 6 mm 0.26 in spacing 4 mm² 10 AWG Simplify the alternated distribution thanks to the two jumper channels aligned with ZS4 feed-through terminal blocks, Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver. 1SNK16100F0014 Disconnect Profile aligned with ZS4-SF Grey ZS4-S-R1 1SNK50610R Blue ZS4-S-R1-BL 1SNK50620R Orange ZS4-S-R1-OR 1SNK5060R ZS4-S-R " " 6 mm 0.26 in spacing " End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161012S Rev. D " " " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 26 A / 4 mm² 26 A / 10 AWG Rated short-time withstand current (1s) 480 A Torque 0.6 N.m ± lb.in ± Rated voltage 400 V 150 V Impulse withstand voltage 6000 V Protection IP20 NEMA 1 Recommendation for best usage: in horizontal assemblies, disconnect terminal blocks should be mounted with fixed foot on top (power side) so that the disconnect knife does not partially close through gravity. Furthermore, as specified per IEC , disconnect terminal blocks are intended to be used for temporary disconnection at zero potential and at no load. The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV DNV Rina Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 81

84 ZS4-S-T-R1 screw clamp terminal blocks Disconnect with blade - with test socket - 6 mm 0.26 in spacing 4 mm² 10 AWG Ease your test operations with the 2 built-in test sockets, Screwdriver or hand operated disconnect blade, Simplify the alternated distribution thanks to the two jumper channels aligned with ZS4 feed-through terminal blocks. ZS4-S-T-R " " " " " 1SNK16105F0014 Disconnect Profile aligned with ZS4-SF, with Grey ZS4-S-T2-R1 1SNK50611R test sockets DIA 2 mm in Blue ZS4-S-T2-R1-BL 1SNK50621R Orange ZS4-S-T2-R1-OR 1SNK5061R Profile aligned with ZS4-SF, with 2 test sockets DIA 2. mm in Grey ZS4-S-T2.-R1 1SNK50612R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 26 A / 4 mm² 26 A / 10 AWG End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161045S Rev. D " 6 mm 0.26 in spacing Rated short-time withstand current (1s) 480 A Torque 0.6 N.m ± lb.in ± Rated voltage 400 V 150 V Impulse withstand voltage 6000 V Protection IP20 NEMA 1 Recommendation for best usage: in horizontal assemblies, disconnect terminal blocks should be mounted with fixed foot on top (power side) so that the disconnect knife does not partially close through gravity. Furthermore, as specified per IEC , disconnect terminal blocks are intended to be used for temporary disconnection at zero potential and at no load. The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV DNV Rina Technical data valid for copper conductors only. 82 ABB SNK series - Terminal blocks

85 ZS6-S screw clamp terminal blocks Disconnect with blade - 6 mm 0.26 in spacing 6 mm² 10 AWG Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver, Same profile as ZS6 feed-through terminal block for aligned marking and identical end section use. ZS6-S " " " " " 1SNK161056F0014 Disconnect Profile aligned with ZS6 Grey ZS6-S 1SNK50615R Blue ZS6-S-BL 1SNK50622R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A4-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø 4 mm with twin ferrule mm² AWG Ø in Rated current / Rated cross section 25 A / 4 mm² 25 A / 10 AWG Maximum current / Maximum cross section 0 A / 6 mm² Rated short-time withstand current (1s) 480 A Torque 0.85 N.m ± lb.in ± 1. Rated voltage 500 V 00 V Impulse withstand voltage 6000 V Protection IP20 NEMA " End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES4 1SNK505910R Circuit separators mm in Dark grey CS-R1 1SNK90010R Shield connectors SHBS 1SNK900600R Protecting covers 6 mm 0.26 in spacing Transparent PL6 1SNK900619R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161046S Rev. D 6 mm 0.26 in spacing Recommendation for best usage: in horizontal assemblies, disconnect terminal blocks should be mounted with fixed foot on top (power side) so that the disconnect knife does not partially close through gravity. Furthermore, as specified per IEC , disconnect terminal blocks are intended to be used for temporary disconnection at zero potential and at no load. The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CSA EAC BV Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 8

86 ZS6-S-4S-T screw clamp terminal blocks Disconnect with blade - with test socket screws 6 mm 0.26 in spacing 6 mm² 10 AWG Recommended for energy markets and highly demanding applications requiring that only one conductor be connected per clamp, Ease your disconnect and test operations with the two built-in test socket screws, Simplify the alternated distribution thanks to the jumper channel. ZS6-S-4S-T " " 6 mm 0.26 in spacing " " " " 1SNK161094V0014 Disconnect with 2 test sockets DIA 2 mm 0,079 in Grey ZS6-S-4S-T2 1SNK50616R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.41 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A4-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø 4 mm with twin ferrule mm² AWG Ø in Rated current / Rated cross section 27 A / 4 mm² 28 A / 10 AWG Rated short-time withstand current (1s) 480 A Torque 0.85 N.m ± lb.in ± 1. Rated voltage 500 V 00 V Impulse withstand voltage 6000 V Protection IP20 NEMA 1 Recommendation for best usage: in horizontal assemblies, disconnect terminal blocks should be mounted with fixed foot on top (power side) so that the disconnect knife does not partially close through gravity. Furthermore, as specified per IEC , disconnect terminal blocks are intended to be used for temporary disconnection at zero potential and at no load. The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CSA EAC BV End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES6-4S 1SNK505911R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R Circuit separators mm in Dark grey CS-R1 1SNK90010R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161071S Rev. A Technical data valid for copper conductors only. 84 ABB SNK series - Terminal blocks

87 ZS10-S screw clamp terminal blocks Disconnect with blade - 8 mm 0.15 in spacing 10 mm² 6 AWG Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver, Same profile as ZS10 feed-through terminal block for aligned marking and identical end section use. ZS10-S " " " " " 1SNK161058F0014 Disconnect Profile aligned with ZS10 Grey ZS10-S 1SNK50815R Blue ZS10-S-BL 1SNK50820R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 12 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A5-B5 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø 4 mm with twin ferrule mm² AWG Ø in Rated current / Rated cross section 25 A / 4 mm² 25 A / 6 AWG Maximum current / Maximum cross section 42 A / 10 mm² Rated short-time withstand current (1s) 480 A Torque 1. N.m ± lb.in ± 2.65 Rated voltage 60 V 00 V Impulse withstand voltage 6000 V Protection IP20 NEMA " End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES4 1SNK505910R Circuit separators mm in Dark grey CS-R1 1SNK90010R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161050S Rev. D 8 mm 0.15 in spacing Recommendation for best usage: in horizontal assemblies, disconnect terminal blocks should be mounted with fixed foot on top (power side) so that the disconnect knife does not partially close through gravity. Furthermore, as specified per IEC , disconnect terminal blocks are intended to be used for temporary disconnection at zero potential and at no load. The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CSA EAC BV Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 85

88 ZS4-SP screw clamp terminal blocks Disconnect with plug mm in spacing 4 mm² 10 AWG Save time with our screwless component holder plug, Same profile as ZS4 feed-through terminal block for aligned marking and identical end section use. ZS4-SP " 1SNK16102F0014 Disconnect Profile aligned with ZS4, plug delivered separetely Grey ZS4-SP 1SNK5051R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 18 A / 2.5 mm² 18 A / 10 AWG " " 81.19" " End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES4 1SNK505910R Shield connectors SHBS 1SNK900600R Component plugs Components in series with circuit Dark grey PG5 1SNK900401R Disconnect plugs Equipped with linking bar Orange PG5-R1 1SNK900402R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK1610S Rev. D Rated short-time withstand current (1s) 00 A Torque 0.6 N.m ± lb.in ± Rated voltage 400 V 150 V Impulse withstand voltage 6000 V Protection IP20 NEMA " The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. 5.2 mm in spacing CE RoHS USR CNR CSA EAC Technical data valid for copper conductors only. 86 ABB SNK series - Terminal blocks

89 ZS4-SP-T2 screw clamp terminal blocks Disconnect with plug - with test socket mm in spacing 4 mm² 10 AWG Ease your test operations with the 2 built-in test sockets DIA 2 mm in, Save time with our screwless component holder plug, Same profile as ZS4 feed-through terminal block for aligned marking and identical end section use. ZS4-SP-T " 1SNK16106F0014 Disconnect Profile aligned with ZS4, with 2 test sockets DIA 2 mm in, plug delivered separetely Grey ZS4-SP-T2 1SNK50514R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 18 A / 2.5 mm² 18 A / 10 AWG " " 81.19" " End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES4 1SNK505910R Shield connectors SHBS 1SNK900600R Component plugs Components in series with circuit Dark grey PG5 1SNK900401R Disconnect plugs Equipped with linking bar Orange PG5-R1 1SNK900402R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161041S Rev. D Rated short-time withstand current (1s) 00 A Torque 0.6 N.m ± lb.in ± Rated voltage 400 V 150 V Impulse withstand voltage 6000 V Protection IP20 NEMA " 5.2 mm in spacing The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE RoHS USR CNR CSA EAC Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 87

90 ZS4-SP-R1 screw clamp terminal blocks Disconnect with plug - 6 mm 0.26 in spacing 4 mm² 10 AWG Simplify the alternated distribution between feed-through and disconnect circuits thanks to the two aligned jumper channels, Save time with our screwless component holder plug. ZS4-SP-R " 1SNK161022F0014 Disconnect Profile aligned with ZS4-SF, plug delivered separetely Grey ZS4-SP-R1 1SNK5061R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 18 A / 2.5 mm² 20 A / 10 AWG " " 81.19" " End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Component plugs Components in series with circuit Dark grey PG5 1SNK900401R Disconnect plugs Equipped with linking bar Orange PG5-R1 1SNK900402R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK16109S Rev. D Rated short-time withstand current (1s) 00 A Torque 0.6 N.m ± lb.in ± Rated voltage 400 V 150 V Impulse withstand voltage 6000 V Protection IP20 NEMA " 6 mm 0.26 in spacing The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE RoHS USR CNR CSA EAC Technical data valid for copper conductors only. 88 ABB SNK series - Terminal blocks

91 ZS4-SP-T2-R1 screw clamp terminal blocks Disconnect with plug - with test socket - 6 mm 0.26 in spacing 4 mm² 10 AWG Ease your test operations with the 2 built-in test sockets DIA 2 mm in, Save time with our screwless component holder plug, Simplify the distribution between feed-through and disconnect circuits thanks to the two aligned jumper channels. ZS4-SP-T2-R " " " 81.19" " 1SNK16107F0014 Disconnect Profile aligned with ZS4-SF, with 2 test sockets DIA 2 mm in, plug delivered separetely Grey ZS4-SP-T2-R1 1SNK50614R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 18 A / 2.5 mm² 20 A / 10 AWG End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Component plugs Components in series with circuit Dark grey PG5 1SNK900401R Disconnect plugs Equipped with linking bar Orange PG5-R1 1SNK900402R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161040S Rev. D " 6 mm 0.26 in spacing Rated short-time withstand current (1s) 00 A Torque 0.6 N.m ± lb.in ± Rated voltage 400 V 150 V Impulse withstand voltage 6000 V Protection IP20 NEMA 1 The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE RoHS USR CNR CSA EAC Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 89

92 ZS10-SP screw clamp terminal blocks Disconnect with plug - 8 mm 0.15 in spacing 10 mm² 6 AWG Save time with our screwless component holder plug, Same profile as ZS10 feed-through terminal block for aligned marking and identical end section use. ZS10-SP " " " 1SNK161060F End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES4 1SNK505910R Component plugs Components in series with circuit Dark grey PG5 1SNK900401R Disconnect plugs Equipped with linking bar Orange PG5-R1 1SNK900402R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161051S Rev. D Disconnect Profile aligned with ZS10 Grey ZS10-SP 1SNK50816R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 12 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A5-B5 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø 4 mm with twin ferrule mm² AWG Ø in Rated current / Rated cross section 18 A / 2.5 mm² 18 A / 6 AWG Maximum current / Maximum cross section 18 A / 10 mm² Rated short-time withstand current (1s) 00 A Torque 1. N.m ± lb.in ± 2.65 Rated voltage 60 V 00 V Impulse withstand voltage 6000 V Protection IP20 NEMA " The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. 8 mm 0.15 in spacing CE RoHS USR CSA EAC Technical data valid for copper conductors only. 90 ABB SNK series - Terminal blocks

93 PB-85 ABB SNK series - Terminal blocks 91

94 SNK series, terminal blocks Fuse protection Optimize your control circuit protection Our SNK series fuse terminal blocks offer a full set of features and functions to protect your control circuits with efficiency and reliability. All terminal blocks complies with the latest evolution of the international standards IEC ( Ancillary equipment safety requirements for fuse terminal blocks. ) which fixes precise temperature constraint for short-circuit and overload protection (information in the catalogue pages related to the products). Qualified for worldwide markets and applications Eco-designed according to international environmental standards in sustainable development. RoHS Select the right fuse holder for the right application 1 standard applications The standard fuse holders feature compact dimensions while offering compatibility with 5 x 20 and 5 x 25 mm fuses. double deck terminal blocks allow efficient space reduction for panels with space constraints. 2 Expert for convenient circuit distribution The expert fuse holders are equipped with two central jumper channels for convenient common distribution and are aligned with feed-through and disconnect terminal blocks. They facilitate alternated potential distribution and reduce wiring. Additional features for easy trouble shooting and testing Performant blown fuse indicators Low leakage current (< 0.5 ma) allows the protection of low current circuits such as PLC s inputs without any risk of circuit disturbances. Large voltage range (24/110 V and 110/250 V AC/DC) reduces the number of variants and allows adaptation to worldwide applications (24/110 V range covers North american market needs). Easy testing Some terminal blocks are equipped with Dia 2 mm built-in test socket screws for circuit testing while respecting the IP20 touch proof protection x20 and 5x25 mm fuses Compact and high density Low leakage current blown fuse indicator. Large voltage range: (24/110 V and 110/250 V AC and DC) 5x20 and 6.x2 mm fuses Easy potential distribution Convenient testing through built in test socket screws 1SNK161085S ABB SNK series - Terminal blocks

95 SNK series, terminal blocks Marshalling cabinets application The smart choice for process automation Large process automation applications typically require the use of a large number of digital or analog signals and sensors. Indeed, marshalling cabinets ensure an important cross wiring function, since the incoming field signal and the channel quantity of the I/O card of the controller (DCS, large PLC s) is always different. They facilitate the maintenance operations and ease the system modifications. SNK aligned terminal blocks offering: SNK series now features a full set of aligned terminal blocks matching the marshalling panels typical configurations. Fuse, disconnect, feed-through and ground terminal blocks with identical profile are providing compact and convenient solution. With only 6 mm spacing, two aligned screwless jumper channels, central large marking as well as aligned conductor entries, they are perfectly adapted to alternative potential distribution while still easy to connect. Typical marshalling configurations Digital signals Popular potential distribution via double center channel. Disconnect functions equipped with test points allow total isolation of circuits, ease circuit testing during start-up, test and maintenance operations. Analog Potential distribution for analog signals. Ground terminal blocks allow reliable connection of cable shields to the ground sparing the use of external shield bar Load Load Load Load Load Load 4 Load Load Load 1 ZS4-R2 2 ZS4-SF ZS4-S-R1 or ZS4-S-R2 4 ZS4-PE-R2 5 JB SNK161086S0201 ABB SNK series - Terminal blocks 9

96 ZS4-SF1 screw clamp terminal blocks For 5 x 20 and 5 x 25 fuses - 8 mm 0.15 in spacing 4 mm² 10 AWG Protect your circuit with 5x25 and 5x20 fuse terminal blocks, compliant with IEC standard (fuse not supplied with the terminal blocks). ZS4-SF " SNK161007F0014 Fuse Grey, dark grey ZS4-SF1 1SNK508410R Orange, dark Grey ZS4-SF1-OR 1SNK50840R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.42 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 6. A / 4 mm² 10 A / 10 AWG " " " " Rated voltage 60 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Torque 0.6 N.m ± lb.in ± mm 0.15 in spacing " End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 1.5 mm in Dark grey ES4-SF 1SNK508960R Lateral jumper bars 10 poles 5 A Black PC SNA1752R Assembly rods 2 poles TGA8 1SNA168672R poles TGA8 1SNA16867R poles TGA8 1SNA168674R Spring retaining rings ANT 1SNA168675R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161011S Rev. D Separate arrangement Assembly composed of 1 fuse terminal block in between non fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 2.5 W 4 W Compound arrangement Assembly composed of 5 fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 1.6 W 4 W The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV DNV Rina Technical data valid for copper conductors only. 94 ABB SNK series - Terminal blocks

97 ZS4-SF1-T screw clamp terminal blocks For 5 x 20 and 5 x 25 fuses - with test socket 8 mm 0.15 in spacing 4 mm² 10 AWG Protect your circuit with 5x25 and 5x20 fuse terminal blocks (fuse not supplied with the terminal blocks), Compliant with IEC standard, With built in test sockets. ZS4-SF1-T " SNK161041F0014 Fuse With 2 test sockets DIA 2 mm in Grey, dark grey ZS4-SF1-T2 1SNK508411R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.42 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 6. A / 4 mm² 10 A / 10 AWG " " 1SNK16106S Rev. C " " Rated voltage 60 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Torque 0.6 N.m ± lb.in ± " 8 mm 0.15 in spacing Separate arrangement Assembly composed of 1 fuse terminal block in between non fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 2.5 W 4 W Compound arrangement Assembly composed of 5 fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 1.6 W 4 W The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV DNV Rina End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 1.5 mm in Dark grey ES4-SF 1SNK508960R Lateral jumper bars 10 poles 5 A Black PC SNA1752R Assembly rods 2 poles TGA8 1SNA168672R poles TGA8 1SNA16867R poles TGA8 1SNA168674R Spring retaining rings ANT 1SNA168675R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 95

98 ZS4-SF1-R screw clamp terminal blocks For 5 x 20 and 5 x 25 fuses - with blown fuse indicator 8 mm 0.15 in spacing 4 mm² 10 AWG Protect your circuit with 5x25 and 5x20 fuse terminal blocks (fuse not supplied with the terminal blocks), Compliant with IEC standard, Quickly identify the defective circuit thanks to the blown fuse indicator (with leakage current < 0.5 ma). ZS4-SF1-R " SNK161042F0014 Fuse With blown fuse indicator V AC / DC Grey, dark grey ZS4-SF1-R1 1SNK508412R With blown fuse indicator V AC / DC ZS4-SF1-R 1SNK508414R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.42 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 6. A / 4 mm² 10 A / 10 AWG " 1SNK16104S Rev. D " " " Rated voltage 60 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Torque 0.6 N.m ± lb.in ± mm 0.15 in spacing " Separate arrangement Assembly composed of 1 fuse terminal block in between non fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 2.5 W 4 W Compound arrangement Assembly composed of 5 fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 1.6 W 4 W The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV DNV Rina End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 1.5 mm in Dark grey ES4-SF 1SNK508960R Lateral jumper bars 10 poles 5 A Black PC SNA1752R Assembly rods 2 poles TGA8 1SNA168672R poles TGA8 1SNA16867R poles TGA8 1SNA168674R Spring retaining rings ANT 1SNA168675R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Technical data valid for copper conductors only. 96 ABB SNK series - Terminal blocks

99 ZS4-SF1-R screw clamp terminal blocks For 5 x 20 and 5 x 25 fuses - with blown fuse indicator and test sockets - 8 mm 0.15 in spacing 4 mm² 10 AWG Protect your circuit with 5x25 and 5x20 fuse terminal blocks (fuse not supplied with the terminal blocks), Compliant with IEC standard, Ease the test with built-in test sockets, Quickly identify the defective circuit thanks to the blown fuse indicator (with leakage current < 0.5 ma). 1SNK16104F0014 Fuse With blown fuse indicator V AC / DC Grey, dark grey ZS4-SF1-R2 1SNK50841R and 2 test sockets DIA 2 mm in With blown fuse indicator V AC / DC and 2 test sockets DIA 2 mm in ZS4-SF1-R4 1SNK508415R ZS4-SF1-R " " " " 8 mm 0.15 in spacing " " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.42 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 6. A / 4 mm² 10 A / 10 AWG Rated voltage 60 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Torque 0.6 N.m ± lb.in ± Separate arrangement Assembly composed of 1 fuse terminal block in between non fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 2.5 W 4 W Compound arrangement Assembly composed of 5 fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 1.6 W 4 W The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV DNV Rina End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 1.5 mm in Dark grey ES4-SF 1SNK508960R Lateral jumper bars 10 poles 5 A Black PC SNA1752R Assembly rods 2 poles TGA8 1SNA168672R poles TGA8 1SNA16867R poles TGA8 1SNA168674R Spring retaining rings ANT 1SNA168675R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK16105S Rev. A Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 97

100 ZS4-R1 screw clamp terminal blocks Feed-through - 8 mm 0.15 in spacing 4 mm² 10 AWG Simplify the alternated feed-through and fuse circuits operations: With the same profile as the ZS4-SF1, the wiring of the alternated feed-through and fuse circuits is easier. ZS4-R " " " 1SNK161046F0014 Feed-through Profile aligned with ZS4-SF1 Grey ZS4-R1 1SNK50801R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.42 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 24 A / 2.5 mm² 26 A / 10 AWG Rated short-time withstand current (1s) 00 A Torque 0.6 N.m ± 0.1 Short Circuit Current Rating (with specific conditions) 5.1 lb.in ± Rated voltage 800 V 00 V Impulse withstand voltage 6000 V Protection IP20 NEMA " 8 mm 0.15 in spacing The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV DNV Rina End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 1.5 mm in Dark grey ES4-SF 1SNK508960R Lateral jumper bars 10 poles 5 A Black PC SNA1752R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Fuse screw clamp terminal blocks Fuse Grey, dark grey ZS4-SF1 1SNK508410R Technical data valid for copper conductors only. 98 ABB SNK series - Terminal blocks 1SNK161009S Rev. D

101 ZS4-S-R screw clamp terminal blocks Disconnect with lever - 8 mm 0.15 in spacing 4 mm² 10 AWG Simplify the disconnect operations for the disconnect terminal blocks installed next to fuse terminal blocks ZS4-SF1: With the same profile as ZS4-SF1, the ZS4-S-R disconnect lever is easily operated by hand and the wiring of the alternated disconnect and fuse circuits is easier. ZS4-S-R " " " " " 1SNK16102F0014 Disconnect Profile aligned with ZS4-SF1 Grey, orange ZS4-S-R 1SNK508416R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.42 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 18 A / 2.5 mm² 18 A / 10 AWG Maximum current / Maximum cross section 18 A / 4 mm² Rated short-time withstand current (1s) 00 A Torque 0.6 N.m ± lb.in ± Rated voltage 60 V 00 V Impulse withstand voltage 6000 V Protection IP20 NEMA 1 8 mm 0.15 in spacing " Recommendation for best usage: in horizontal assemblies, disconnect terminal blocks should be mounted with fixed foot on top (power side) so that the disconnect lever does not partially close through gravity. Furthermore, as specified per IEC , disconnect terminal blocks are intended to be used for temporary disconnection at zero potential and at no load. The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE RoHS USR CNR CSA EAC BV DNV Rina End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 1.5 mm in Dark grey ES4-SF 1SNK508960R Lateral jumper bars 10 poles 5 A Black PC SNA1752R Assembly rods 2 poles TGA8 1SNA168672R poles TGA8 1SNA16867R poles TGA8 1SNA168674R Spring retaining rings ANT 1SNA168675R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Fuse screw clamp terminal blocks Fuse Grey, dark grey ZS4-SF1 1SNK508410R Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 99 1SNK161044S Rev. D

102 ZS4-SF screw clamp terminal blocks For 5 x 20 fuses - 6 mm 0.26 in spacing 4 mm² 10 AWG Protect your circuits with 5x20 fuse terminal blocks compliant with IEC standard (fuse not supplied with the terminal blocks), Simplify the distribution thanks to the two jumper channels aligned with ZS4 feed-through and ZS4-S-R1 disconnect terminal blocks. ZS4-SF " 1SNK161021F0014 Fuse Grey, dark grey ZS4-SF 1SNK506410R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 6. A / 4 mm² 10 A / 10 AWG " " Rated voltage 500 V 150 V Impulse withstand voltage 6000 V Protection IP20 NEMA 1 Torque 0.6 N.m ± lb.in ± " 6 mm 0.26 in spacing Mount your fuse safely without touching any active part: put the fuse into the hooks of the fuse holder shutter; at the closing of the shutter, the fuse is perfectly in place in the fuse holder. Separate Assembly composed of 1 fuse terminal block in Overload and short-circuit 2.5 W arrangement between non fuse terminal blocks protection Exclusive short-circuit protection 4 W Compound arrangement Assembly composed of 5 fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 2.5 W 4 W The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV DNV Rina End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161005S Rev. D Technical data valid for copper conductors only. 100 ABB SNK series - Terminal blocks

103 ZS4-SF-T screw clamp terminal blocks For 5 x 20 fuses - with test socket - 6 mm 0.26 in spacing 4 mm² 10 AWG Protect your circuits with 5x20 fuse terminal blocks compliant with IEC standard (fuse not supplied with the terminal blocks), Simplify the distribution thanks to the two jumper channels aligned with ZS4 feed-through and ZS4-S-R1 disconnect terminal blocks, Ease the test with built-in test socket screws. ZS4-SF-T " " " 1SNK16108F0014 Fuse With 2 test sockets DIA 2 mm in Grey, dark grey ZS4-SF-T2 1SNK506411R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 6. A / 4 mm² 10 A / 10 AWG Rated voltage 500 V 150 V Impulse withstand voltage 6000 V Protection IP20 NEMA 1 Torque 0.6 N.m ± lb.in ± " 6 mm 0.26 in spacing Mount your fuse safely without touching any active part: put the fuse into the hooks of the fuse holder shutter; at the closing of the shutter, the fuse is perfectly in place in the fuse holder. Separate Assembly composed of 1 fuse terminal block in Overload and short-circuit 2.5 W arrangement between non fuse terminal blocks protection Exclusive short-circuit protection 4 W Compound arrangement Assembly composed of 5 fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 2.5 W 4 W The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV DNV Rina End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK16108S Rev. D Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 101

104 ZS4-SF-R screw clamp terminal blocks For 5 x 20 fuses - with blown fuse indicator - 6 mm 0.26 in spacing 4 mm² 10 AWG Protect your circuits with 5x20 fuse terminal blocks compliant with IEC standard (fuse not supplied with the terminal blocks), Simplify the distribution thanks to the two jumper channels aligned with ZS4 feed-through and ZS4-S-R1 disconnect terminal blocks, Quickly identify the defective circuit thanks to the blown fuse indicator (with leakage current < 0.5 ma). 1SNK16109F0014 Fuse With blown fuse indicator V AC / DC Grey, dark grey ZS4-SF-R1 1SNK506412R With blown fuse indicator V AC / DC ZS4-SF-R 1SNK506415R ZS4-SF-R " " 6 mm 0.26 in spacing " " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 6. A / 4 mm² 10 A / 10 AWG Rated voltage 500 V 150 V Impulse withstand voltage 6000 V Protection IP20 NEMA 1 Torque 0.6 N.m ± lb.in ± Mount your fuse safely without touching any active part: put the fuse into the hooks of the fuse holder shutter; at the closing of the shutter, the fuse is perfectly in place in the fuse holder. Separate Assembly composed of 1 fuse terminal block in Overload and short-circuit 2.5 W arrangement between non fuse terminal blocks protection Exclusive short-circuit protection 4 W Compound arrangement Assembly composed of 5 fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 2.5 W 4 W The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV DNV Rina End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161006S Rev. D Technical data valid for copper conductors only. 102 ABB SNK series - Terminal blocks

105 ZS4-SF-R screw clamp terminal blocks For 5 x 20 fuses - with blown fuse indicator and test sockets 6 mm 0.26 in spacing 4 mm² 10 AWG 1SNK161040F0014 Protect your circuits with 5x20 fuse terminal blocks compliant with IEC standard (fuse not supplied with the terminal blocks), Simplify the distribution thanks to the two jumper channels aligned with ZS4 feed-through and ZS4-S-R1 disconnect terminal blocks, Ease the test with built-in test socket screws, Quickly identify the defective circuit thanks to the blown fuse indicator (with leakage current < 0.5 ma). Fuse With blown fuse indicator V AC / DC Grey, dark grey ZS4-SF-R2 1SNK50641R and 2 test sockets DIA 2 mm in With blown fuse indicator V AC / DC and 2 test sockets DIA 2 mm in ZS4-SF-R4 1SNK506416R ZS4-SF-R " " " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 6. A / 4 mm² 10 A / 10 AWG " 6 mm 0.26 in spacing Rated voltage 500 V 150 V Impulse withstand voltage 6000 V Protection IP20 NEMA 1 Torque 0.6 N.m ± lb.in ± Mount your fuse safely without touching any active part: put the fuse into the hooks of the fuse holder shutter; at the closing of the shutter, the fuse is perfectly in place in the fuse holder. Separate Assembly composed of 1 fuse terminal block in Overload and short-circuit 2.5 W arrangement between non fuse terminal blocks protection Exclusive short-circuit protection 4 W Compound arrangement Assembly composed of 5 fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 2.5 W 4 W The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV DNV Rina End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK16107S Rev. D Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 10

106 ZS4-R2 screw clamp terminal blocks Feed-through - 6 mm 0.26 in spacing 4 mm² 10 AWG Simplify the distribution of circuits in marshalling cabinets thanks to our feed-through terminal blocks with the same profile as ZS4-SF fuse, ZS4-S-R1 disconnect and ZS4-PE-R2 ground terminal blocks: Aligned conductor entries, jumper channels and marking in just 6 mm 0.26 in spacing, No end section needed: closed block. 1SNK161074V0014 Feed-through Profile aligned with ZS4-SF and ZS4-S-R1 Grey ZS4-R2 1SNK50601R ZS4-R " " " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.41 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 2 A / 4 mm² 0 A / 10 AWG Rated short-time withstand current (1s) 480 A Torque 0.6 N.m ± lb.in ± Rated voltage 800 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA " 6 mm 0.26 in spacing The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R Cross spacing jumpers Orange JB85-1SNK90060R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. ZS4-SF ZS4-S-R1 Screw clamp terminal blocks Fuse Profile aligned with ZS4-R2 Grey, dark grey ZS4-SF 1SNK506410R and ZS4-PE-R2 Disconnect Profile aligned with ZS4-R2 and ZS4-PE-R2 Grey ZS4-S-R1 1SNK50610R SNK16108S Rev. A 104 ABB SNK series - Terminal blocks

107 ZS4-PE-R2 screw clamp terminal blocks Ground - 6 mm 0.26 in spacing 4 mm² 10 AWG Simplify the shielding connection of your analog circuits in marshalling cabinets thanks to our ground terminal blocks with the same profile as ZS4-SF fuse, ZS4-S-R1 disconnect and ZS4-R2 feed-through terminal blocks. ZS4-PE-R2 77.0" " " 1SNK161089V0014 Ground Screwless rail connection Green-yellow ZS4-PE-R2 1SNK50615R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.41 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B Tool Flat screwdriver Ø.5 mm Ø 0.18 in Rated cross section 4 mm² 10 AWG Rated short-time withstand current (1s) 480 A 96 A Torque 0.6 N.m ± lb.in ± Protection IP20 NEMA 1 6 mm 0.26 in spacing " The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey ES6-4S 1SNK505911R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. ZS4-SF ZS4-S-R1 Screw clamp terminal blocks Fuse Profile aligned with ZS4-R2 Grey, dark grey ZS4-SF 1SNK506410R and ZS4-PE-R2 Disconnect Profile aligned with ZS4-R2 and ZS4-PE-R2 Grey ZS4-S-R1 1SNK50610R SNK161079S Rev. A ABB SNK series - Terminal blocks 105

108 ZS4-S-R2 screw clamp terminal blocks Disconnect with lever - 6 mm 0.26 in spacing 4 mm² 10 AWG Simplify the disconnect operations for the disconnect terminal blocks installed next to fuse terminal blocks ZS4-SF: With the same profile as ZS4-SF, the ZS4-S-R2 disconnect lever is easily operated by hand and the wiring of the alternated disconnect and fuse circuits is easier. ZS4-S-R " 1SNK1610F " " Disconnect Profile aligned with ZS4-SF Grey, orange ZS4-S-R2 1SNK506414R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 18 A / 2.5 mm² 1 A / 10 AWG Maximum current / Maximum cross section 18 A / 4 mm² Rated short-time withstand current (1s) 00 A Torque 0.6 N.m ± lb.in ± Rated voltage 400 V 150 V Impulse withstand voltage 6000 V Protection IP20 NEMA " 6 mm 0.26 in spacing Recommendation for best usage: in horizontal assemblies, disconnect terminal blocks should be mounted with fixed foot on top (power side) so that the disconnect lever does not partially close through gravity. Furthermore, as specified per IEC , disconnect terminal blocks are intended to be used for temporary disconnection at zero potential and at no load. The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV DNV Rina End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Fuse screw clamp terminal blocks Fuse Grey, dark grey ZS4-SF 1SNK506410R Technical data valid for copper conductors only. 106 ABB SNK series - Terminal blocks 1SNK16104S Rev. D

109 ZS10-SF screw clamp terminal blocks For 6.x2 fuses - 8 mm 0.15 in spacing 10 mm² 6 AWG Protect your circuits with 6.x2 (¼ x 1¼ in) fuse terminal blocks compliant with IEC standard (fuse not supplied with the terminal blocks), Simplify the distribution thanks to the two jumper channels. ZS10-SF " 1SNK161071F0014 Fuse Closed block Grey, dark grey ZS10-SF 1SNK508418R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 1 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A5-B5 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø 4 mm with twin ferrule mm² AWG Ø in Rated current / Rated cross section 10 A / 10 mm² 22 A / 6 AWG 85..6" " Rated voltage 60 V 600 V Impulse withstand voltage 6000 V Protection IP20 NEMA 1 Torque 1. N.m ± lb.in ± " 8 mm 0.15 in spacing Mount your fuse safely without touching any active part: put the fuse into the hooks of the fuse holder shutter; at the closing of the shutter, the fuse is perfectly in place in the fuse holder. Separate Assembly composed of 1 fuse terminal block in Overload and short-circuit 4 W arrangement between non fuse terminal blocks protection Exclusive short-circuit protection 4 W Compound arrangement Assembly composed of 5 fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 2.5 W 2.5 W The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R Jumper bars 2 poles Orange JB8-2 1SNK90802R poles JB8-1SNK9080R poles JB8-4 1SNK90804R poles JB8-5 1SNK90805R poles JB8-10 1SNK90810R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Spacers 2.8 mm in Dark grey ES-TC8 1SNK900104R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161052S Rev. B Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 107

110 ZS10-SF-R screw clamp terminal blocks For 6.x2 fuses - with blown fuse indicator - 8 mm 0.15 in spacing 10 mm² 6 AWG Protect your circuits with 6.x2 (¼ x 1¼ in) fuse terminal blocks compliant with IEC standard (fuse not supplied with the terminal blocks), Quickly identify the defective circuit thanks to the blown fuse indicator (with leakage current < 0.5 ma). ZS10-SF-R " 1SNK16107F0014 Fuse With blown fuse indicator V AC / DC Grey, dark grey ZS10-SF-R1 1SNK508421R With blown fuse indicator V AC / DC ZS10-SF-R 1SNK508422R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 1 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A5-B5 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø 4 mm with twin ferrule mm² AWG Ø in Rated current / Rated cross section 10 A / 10 mm² 22 A / 6 AWG 85..6" " Rated voltage 60 V 600 V Impulse withstand voltage 6000 V Protection IP20 NEMA 1 Torque 1. N.m ± lb.in ± " 8 mm 0.15 in spacing Mount your fuse safely without touching any active part: put the fuse into the hooks of the fuse holder shutter; at the closing of the shutter, the fuse is perfectly in place in the fuse holder. Separate Assembly composed of 1 fuse terminal block in Overload and short-circuit 4 W arrangement between non fuse terminal blocks protection Exclusive short-circuit protection 4 W Compound arrangement Assembly composed of 5 fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 2.5 W 2.5 W The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R Jumper bars 2 poles Orange JB8-2 1SNK90802R poles JB8-1SNK9080R poles JB8-4 1SNK90804R poles JB8-5 1SNK90805R poles JB8-10 1SNK90810R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Spacers 2.8 mm in Dark grey ES-TC8 1SNK900104R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Technical data valid for copper conductors only. 108 ABB SNK series - Terminal blocks 1SNK16105S Rev. B

111 ZS10-S-R2 screw clamp terminal blocks Disconnect with lever - 8 mm 0.15 in spacing 10 mm² 6 AWG Simplify the disconnect operations for the disconnect terminal blocks installed next to fuse terminal blocks ZS10-SF: With the same profile as ZS10-SF, the ZS10-S-R2 disconnect lever is easily operated by hand and the wiring of the alternated disconnect and fuse circuits is easier. Disconnect Profile aligned with ZS10-SF Grey, orange ZS10-S-R2 1SNK508417R ZS10-S-R " 1SNK161070F " " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 1 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A5-B5 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø 4 mm with twin ferrule mm² AWG Ø in Rated current / Rated cross section 10 A / 4 mm² 22 A / 25 AWG Maximum current / Maximum cross section 25 A / 10 mm² Rated short-time withstand current (1s) 480 A Torque 1. N.m ± lb.in ± 2.65 Rated voltage 60 V 600 V Impulse withstand voltage 6000 V Protection IP20 NEMA " 8 mm 0.15 in spacing Recommendation for best usage: in horizontal assemblies, disconnect terminal blocks should be mounted with fixed foot on top (power side) so that the disconnect lever does not partially close through gravity. Furthermore, as specified per IEC , disconnect terminal blocks are intended to be used for temporary disconnection at zero potential and at no load. The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R Jumper bars 2 poles Orange JB8-2 1SNK90802R poles JB8-1SNK9080R poles JB8-4 1SNK90804R poles JB8-5 1SNK90805R poles JB8-10 1SNK90810R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Spacers 2.8 mm in Dark grey ES-TC8 1SNK900104R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Fuse screw clamp terminal blocks Fuse Closed block Grey, dark grey ZS10-SF 1SNK508418R Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 109 1SNK161055S Rev. B

112 ZS4-D2 screw clamp terminal blocks Double deck with 2 feed-through circuits mm in spacing 4 mm² 12 AWG Save space with double deck terminal blocks: 2 independent circuits connected in just 5.2 mm in spacing, Customize yourself the ZS4-D2 by soldering electronic components (up to 8.8 mm x.2 mm 0.46 x in) in the existing linking bars punching. 1SNK161014F0014 Feed-through 2 feed-through circuits Grey ZS4-D2 1SNK505210R Blue ZS4-D2-BL 1SNK505220R Orange ZS4-D2-OR 1SNK50520R End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R End sections 2.55 mm in Dark grey ES4-D2 1SNK505960R Jumper bars 2 poles Orange JB5-2 1SNK90502R poles JB5-1SNK9050R poles JB5-4 1SNK90504R poles JB5-5 1SNK90505R poles JB5-10 1SNK90510R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Shield connectors SHB 1SNK900602R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK16100S Rev. D ZS4-D " " 5.2 mm in spacing " " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 10 mm per clamp Flexible mm² length 0.9 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 29 A / 4 mm² 20 A / 12 AWG Rated short-time withstand current (1s) 480 A Torque 0.6 N.m ± 0.1 Short Circuit Current Rating (with specific conditions) 100 ka 5.1 lb.in ± Rated voltage 800 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 440 V 29 A IEC/EN IM2 II 2 GD Ex eb I/II/IIIC 00 V 20 A UL Class I, Zone I, AEx e II The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BR-Ex e II Haz Loc BV DNV Rina Technical data valid for copper conductors only. 110 ABB SNK series - Terminal blocks

113 ZS4-D1 screw clamp terminal blocks Double deck with 1 feed-through circuit mm in spacing 4 mm² 12 AWG Ease one potential distribution on 4 independent screw clamps, Save space by connecting conductors up to 4 mm² (CB certified) 12 AWG in just 5.2 mm in spacing. Feed-through 1 feed-through circuit Grey ZS4-D1 1SNK505211R ZS4-D " " " 1SNK161015F0014 Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 10 mm per clamp Flexible mm² length 0.9 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 29 A / 4 mm² 20 A / 12 AWG Rated short-time withstand current (1s) 480 A Torque 0.6 N.m ± 0.1 Short Circuit Current Rating (with specific conditions) 100 ka 5.1 lb.in ± Rated voltage 800 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 440 V 29 A IEC/EN IM2 II 2 GD Ex eb I/II/IIIC 00 V 20 A UL Class I, Zone I, AEx e II The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R End sections 2.55 mm in Dark grey ES4-D2 1SNK505960R Jumper bars 2 poles Orange JB5-2 1SNK90502R poles JB5-1SNK9050R poles JB5-4 1SNK90504R poles JB5-5 1SNK90505R poles JB5-10 1SNK90510R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Shield connectors SHB 1SNK900602R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161007S Rev. D CE CB RoHS USR CNR CSA EAC ATEX IECEx BR-Ex e II Haz Loc BV DNV Rina " 5.2 mm in spacing Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 111

114 ZS6-D2 screw clamp terminal blocks Double deck with 2 feed-through circuits - 6 mm 0.26 in spacing ZS6-D2 6 mm² 10 AWG 1SNK161010F0014 Save space with double deck terminal blocks: 2 independent circuits connected in just 6 mm 0.26 in spacing, Customize yourself the ZS6-D2 by soldering electronic components (up to 8.8 mm x.2 mm 0.46 x in) in the existing linking bars punching, Boost the performances: ZS6-D... with ES4-D2 end section is rated 1000 V DC IEC, perfectly adapted to solar applications. Feed-through 2 feed-through circuits Grey ZS6-D2 1SNK506210R Blue ZS6-D2-BL 1SNK506220R Orange ZS6-D2-OR 1SNK50620R Yellow ZS6-D2-YL 1SNK506260R Red ZS6-D2-RD 1SNK506262R White ZS6-D2-WH 1SNK506265R Black ZS6-D2-BK 1SNK506266R " " 6 mm 0.26 in spacing " " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 10 mm per clamp Flexible mm² length 0.9 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A4-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø 4 mm with twin ferrule mm² AWG Ø in Rated current / Rated cross section 40 A / 6 mm² 0 A / 10 AWG Rated short-time withstand current (1s) 720 A Torque 0.85 N.m ± 0.15 Short Circuit Current Rating (with specific conditions) 100 ka 7.52 lb.in ± 1. Rated voltage 800 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 440 V 40 A IEC/EN IM2 II 2 GD Ex eb I/II/IIIC 00 V 0 A UL Class I, Zone I, AEx e II The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC ATEX IECEx BR-Ex e II Haz Loc BV DNV Rina End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R End sections 2.55 mm in Dark grey ES4-D2 1SNK505960R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Shield connectors SHB 1SNK900602R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161014S Rev. D Technical data valid for copper conductors only. 112 ABB SNK series - Terminal blocks

115 ZS6-D1 screw clamp terminal blocks Double deck with 1 feed-through circuit - 6 mm 0.26 in spacing 6 mm² 10 AWG Ease one potential distribution on 4 independent screw clamps, Save space by connecting conductors up to 6 mm² 10 AWG in just 6 mm 0.26 in spacing, Boost the performances: ZS6-D... with ES4-D2 end section is rated 1000 V DC IEC, perfectly adapted to solar applications. ZS6-D " " 1SNK161009F " " Feed-through 1 feed-through circuit Grey ZS6-D1 1SNK506211R Red ZS6-D1-RD 1SNK506214R End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R End sections 2.55 mm in Dark grey ES4-D2 1SNK505960R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Shield connectors SHB 1SNK900602R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK16101S Rev. D Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 10 mm per clamp Flexible mm² length 0.9 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A4-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø 4 mm with twin ferrule mm² AWG Ø in Rated current / Rated cross section 40 A / 6 mm² 0 A / 10 AWG Rated short-time withstand current (1s) 720 A Torque 0.85 N.m ± 0.15 Short Circuit Current Rating (with specific conditions) 100 ka 7.52 lb.in ± 1. Rated voltage 800 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Increased safety Ex e 440 V 40 A IEC/EN IM2 II 2 GD Ex eb I/II/IIIC 00 V 0 A UL Class I, Zone I, AEx e II The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. 6 mm 0.26 in spacing CE CB RoHS USR CNR CSA EAC ATEX IECEx BR-Ex e II Haz Loc BV DNV Rina Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 11

116 ZS6-D2-PE screw clamp terminal blocks Double deck with 1 feed-through circuit and 1 ground circuit 6 mm 0.26 in spacing 6 mm² 10 AWG Save space with ZS6-D2-PE terminal blocks: 1 feed-through circuit and 1 ground circuit in just 6 mm 0.26 in spacing, Customize yourself the ZS6-D2-PE terminal blocks by soldering electronic components (up to 8.8 mm x.2 mm 0.46 x in) in the existing linking bars punching. ZS6-D2-PE " " " 1SNK161061F0014 Feed-through + 1 feed-through circuit and 1 ground Grey ZS6-D2-PE 1SNK506212R ground circuit Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 10 mm per clamp Flexible mm² length 0.9 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A4-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø 4 mm with twin ferrule mm² AWG Ø in Rated current / Rated cross section 41 A / 6 mm² 0 A / 10 AWG Rated short-time withstand current (1s) 720 A Torque 0.85 N.m ± 0.15 Short Circuit Current Rating (with specific conditions) 7.52 lb.in ± 1. Rated voltage 800 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA " 6 mm 0.26 in spacing The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CSA EAC BV End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R End sections 2.55 mm in Dark grey ES4-D2 1SNK505960R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R Test adapters For test plugs DIA 4 mm in Dark grey TP4 1SNK900205R Test connectors End module, 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Double deck screw clamp terminal blocks Double deck 2 feed-through circuits Grey ZS6-D2 1SNK506210R SNK161048S Rev. D Technical data valid for copper conductors only. 114 ABB SNK series - Terminal blocks

117 ZS6-D1-PE screw clamp terminal blocks Double deck with 1 ground circuit - 6 mm 0.26 in spacing 6 mm² 10 AWG Save space with double deck ground terminal blocks aligned with ZS6-D2 double deck terminal blocks for convenient cabling process and circuit configuration, Benefit from our screwless rail connection: non operator independant, secured snap on or remove from the rail, performances above the requirements of IEC standard. ZS6-D1-PE " 1SNK161062F " " Ground 1 ground circuit Green-yellow ZS6-D1-PE 1SNK506250R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 10 mm per clamp Flexible mm² length 0.9 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A4-B Tool Flat screwdriver Ø 4 mm Ø in Rated cross section 6 mm² 10 AWG Rated short-time withstand current (1s) 720 A Torque 0.85 N.m ± lb.in ± 1. Protection IP20 NEMA End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R End sections 2.55 mm in Dark grey ES4-D2 1SNK505960R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161049S Rev. E " 6 mm 0.26 in spacing The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CSA EAC BV Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 115

118 ZS4-D2-S screw clamp terminal blocks Double deck with 1 disconnect circuit and 1 feed-through circuit 5.2 mm in spacing 4 mm² 10 AWG Save space: connect one complete circuit on a single block featuring disconnect and feed-through for the return circuit in just 5.2 mm in spacing, Same profile as ZS4-D... double deck terminal blocks: convenient cabling process, aligned jumpers, markers and common end section. ZS4-D2-S " " " 1SNK161095V " " Double deck 1 disconnect circuit and 1 feedthrough circuit Grey ZS4-D2-S 1SNK50515R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.41 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Disconnect circuit Rated current / Rated cross section 25 A / 4 mm² 27 A / 10 AWG Feed-through circuit Rated current / Rated cross section 29 A / 4 mm² 27 A / 10 AWG Torque 0.6 N.m ± 0.1 Rated short-time withstand current (1s) 480 A 5.1 lb.in ± Rated voltage 60 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA " 5.2 mm in spacing Recommendation for best usage: in horizontal assemblies, disconnect terminal blocks should be mounted with fixed foot on top (power side) so that the disconnect knife does not partially close through gravity. Furthermore, as specified per IEC , disconnect terminal blocks are intended to be used for temporary disconnection at zero potential and at no load. The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CSA EAC BV End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R End sections 2.55 mm in Dark grey ES4-D2 1SNK505960R Jumper bars 2 poles Orange JB5-2 1SNK90502R poles JB5-1SNK9050R poles JB5-4 1SNK90504R poles JB5-5 1SNK90505R poles JB5-10 1SNK90510R poles JB5-50 1SNK90550R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Shield connectors SHB 1SNK900602R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161074S Rev. A Technical data valid for copper conductors only. 116 ABB SNK series - Terminal blocks

119 ZS4-D2-S-T screw clamp terminal blocks Double deck with 1 disconnect circuit with test socket screws and 1 feed-through circuit mm in spacing 4 mm² 10 AWG Find the same functionalities as ZS4-D2-S, upgraded with the two built-in test socket screws meant to ease your signal testing during commissioning and maintenance. Double deck 1 disconnect circuit with 2 test socket screws and 1 feed-through circuit Grey ZS4-D2-S-T2 1SNK50516R ZS4-D2-S-T " " " " 1SNK161099V " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.41 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Disconnect circuit Rated current / Rated cross section 25 A / 4 mm² 27 A / 10 AWG Feed-through circuit Rated current / Rated cross section 29 A / 4 mm² 27 A / 10 AWG Torque 0.6 N.m ± 0.1 Rated short-time withstand current (1s) 480 A 5.1 lb.in ± Rated voltage 60 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA " 5.2 mm in spacing End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R End sections 2.55 mm in Dark grey ES4-D2 1SNK505960R Jumper bars 2 poles Orange JB5-2 1SNK90502R poles JB5-1SNK9050R poles JB5-4 1SNK90504R poles JB5-5 1SNK90505R poles JB5-10 1SNK90510R poles JB5-50 1SNK90550R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Shield connectors SHB 1SNK900602R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161075S Rev. A Recommendation for best usage: in horizontal assemblies, disconnect terminal blocks should be mounted with fixed foot on top (power side) so that the disconnect knife does not partially close through gravity. Furthermore, as specified per IEC , disconnect terminal blocks are intended to be used for temporary disconnection at zero potential and at no load. The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CSA EAC BV Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 117

120 ZS4-D2-SF1 screw clamp terminal blocks Double deck with 1 fuse circuit and 1 feed-through circuit 8 mm 0.15 in spacing 4 mm² 10 AWG Save space: connect one complete circuit on a single block featuring fuse and feed-through for the return circuit, Protect your circuit with either 5X20 or 5X25 fuse (fuse not supplied with the terminal blocks), High performances product: compliant with IEC standard and jumper channel for the feedthrough circuit. 1SNK161096V0014 Double deck 1 fuse circuit and 1 feed-through circuit Grey, dark grey ZS4-D2-SF1 1SNK508425R ZS4-D2-SF " " " 8 mm 0.15 in spacing " 8.27" " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Disconnect circuit Rated current / Rated cross section 6. A / 4 mm² 12 A / 10 AWG Feed-through circuit Rated current / Rated cross section 2 A / 4 mm² 0 A / 10 AWG Torque 0.6 N.m ± lb.in ± Rated voltage 800 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Separate arrangement Assembly composed of 1 fuse terminal block in between non fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 2.5 W 4 W Compound arrangement Assembly composed of 5 fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 1.6 W 4 W The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CSA EAC BV End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R End sections 2.5 mm in Dark grey ES4-D2-SF1 1SNK508911R Jumper bars 2 poles Orange JB8-2 1SNK90802R poles JB8-1SNK9080R poles JB8-4 1SNK90804R poles JB8-5 1SNK90805R poles JB8-10 1SNK90810R Lateral jumper bars 10 poles PC SNA1752R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Spacers 2.8 mm in Dark grey ES-TC8 1SNK900104R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Technical data valid for copper conductors only. 118 ABB SNK series - Terminal blocks 1SNK161076S Rev. A

121 ZS4-D2-SF1-R screw clamp terminal blocks Double deck with 1 fuse circuit with blown fuse indicator and 1 feed-through circuit - 8 mm 0.15 in spacing ZS4-D2-SF1-R " " " 8 mm 0.15 in spacing 4 mm² 10 AWG " 8.27" " 1SNK161097V0014 Find the same functionalities as ZS4-D2-SF1, upgraded with our integrated blown fuse indicator (with leakage current < 0.5 ma), Only one part number needed to fit AC / DC 24 V up to 110 V. Double deck 1 fuse circuit with blown fuse Grey, dark grey ZS4-D2-SF1-R1 1SNK50842R indicator V AC / DC and 1 feed-through circuit 1 fuse circuit with blown fuse indicator V AC / DC and 1 feed-through circuit ZS4-D2-SF1-R 1SNK508424R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Disconnect circuit Rated current / Rated cross section 6. A / 4 mm² 12 A / 10 AWG Feed-through circuit Rated current / Rated cross section 2 A / 4 mm² 0 A / 10 AWG Torque 0.6 N.m ± lb.in ± Rated voltage 800 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Separate arrangement Assembly composed of 1 fuse terminal block in between non fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 2.5 W 4 W Compound arrangement Assembly composed of 5 fuse terminal blocks Overload and short-circuit protection Exclusive short-circuit protection 1.6 W 4 W The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website CE CB RoHS USR CSA EAC BV 1 End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R End sections 2.5 mm in Dark grey ES4-D2-SF1 1SNK508911R Jumper bars 2 poles Orange JB8-2 1SNK90802R poles JB8-1SNK9080R poles JB8-4 1SNK90804R poles JB8-5 1SNK90805R poles JB8-10 1SNK90810R Lateral jumper bars 10 poles PC SNA1752R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Spacers 2.8 mm in Dark grey ES-TC8 1SNK900104R Terminal block Blank card White MC812 1SNK160000R markers MC812PA 1SNK169999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 119 1SNK161077S Rev. A

122 ZS4-T screw clamp terminal blocks Triple deck with feed-through circuits mm in spacing 4 mm² 12 AWG Save space: independent circuits in just 5.2 mm in spacing, Fit many applications: space constraints, multiple signals distribution, sensors distribution, thanks to the jumper channels available on each deck. ZS4-T " 1SNK161087V0014 Triple deck feed-through circuits Grey ZS4-T 1SNK505212R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.41 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 2 A / 4 mm² 20 A / 12 AWG " End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R End sections 0.8 mm 0.01 in Dark grey ES4-T 1SNK505961R Jumper bars 2 poles Orange JB5-2 1SNK90502R poles JB5-1SNK9050R poles JB5-4 1SNK90504R poles JB5-5 1SNK90505R poles JB5-10 1SNK90510R poles JB5-50 1SNK90550R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161072S Rev. A Rated short-time withstand current (1s) 480 A Torque 0.6 N.m ± lb.in ± Rated voltage 800 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA " 5.2 mm in spacing The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CSA EAC BV Technical data valid for copper conductors only. 120 ABB SNK series - Terminal blocks

123 ZS4-T-R1 screw clamp terminal blocks Triple deck with feed-through circuits - 6 mm 0.26 in spacing 4 mm² 10 AWG Unique triple deck solution combining increased connecting capacity ( up to 4 mm² with ferrule) and jumper channel available on each deck, Fit many applications: space constraints, multiple signals distribution, sensors distribution, Closed terminal block: no end section needed, optimized rigidity. ZS4-T-R " " " 1SNK161088V0014 Triple deck Closed block with feed-through circuits Grey ZS4-T-R1 1SNK50621R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.41 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 2 A / 4 mm² 0 A / 10 AWG Rated short-time withstand current (1s) 480 A Torque 0.6 N.m ± lb.in ± Rated voltage 800 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA End stops 10 mm 0.94 in Dark grey BAZH1 1SNK900102R Jumper bars 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK16107S Rev. A " 6 mm 0.26 in spacing The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CSA EAC BV Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 121

124 SNK series, terminal blocks Screw clamp technology Test & measurement Secure your measurement operations The new ZS10-ST test & measurement terminal blocks benefit from our long experience in the energy applications and from the SNK features: performances, ergonomy, common accessories and marking. High performances 10 mm² 6 AWG 6 mm² 10 AWG with ferrule 50 A (IEC) 5 A (UL) Worldwide certifications RoHS BV Rely on our smart design Insulated short circuit bridges: SC-JB8 Insulated captive test sockets: AJS9 6 colors compatible with standard DIA. 4 mm test plugs (IEC ) Circuit separators: CS For visual separation between CT & PT circuits Protecting cover kits: KCO New ground terminal block: ZS10-PE-R1 Lateral jumper bar: PC8 For CT or PT commoning 1SNK160057S ABB SNK series - Terminal blocks

125 Guarantee access only to authorized operators cover can be permanently sealed with a seal or cable tie. Centering drilling guide for seal or cable tie. The cover is specially designed to ease its mounting or removal: Hook shape on each side for convenient removal with screwdriver Assembly with protecting cover Drilling and centering guide Seal with cable tie Convenient removal with screwdriver CT side PT side sliding link status: closed Disconnect sliding link status: Open and close symbols help to visualize the sliding link position sliding link status: opened Measuring equipment side Short-circuit CT circuits safely and conveniently Fully operated by screwdriver (DIA.5 mm) 2 Short-circuited position secured thanks to AJS9 test sockets tightening Adapted hook shape maintain the bridge on terminal block in the non connected position 1SNK160057S0201 ABB SNK series - Terminal blocks 12

126 SNK series, terminal blocks Test & measurement Typical schematic for measuring devices Common point on the transformers CT's PT's L1 L2 P1 P1 P2 S1 S2 P2 L P1 P2 S1 S2 S1 S2 P P P S S S 1 2 N N Current inputs Voltage inputs Measuring devices (ie: meters, protection relays ) Bill of material optimized Bill of material with convenient customization (test sockets, feed-through terminals ) CT's PT's CT's PT's Type Order code Qty needed CT s PT s 1 Terminal block ZS10-ST-T4 1SNK50811R End section ES10-ST 1SNK508910R Short-circuit bridges SC-JB8-2 1SNK900652R Type Order code Qty needed CT s PT s 1 Terminal block ZS10-ST-T4 1SNK50811R Terminal block ZS10-R1 1SNK508011R Terminal block ZS10-ST-1 1SNK50812R End section ES10-ST 1SNK508910R Short-circuit bridges SC-JB8-2 1SNK900652R Test socket AL4-M 1SNA206721R Insulated test socket AJS9 1SNA179726R SNK160058S ABB SNK series - Terminal blocks

127 SNK series, terminal blocks Test & measurement Typical schematic for measuring devices Common point on the terminal block assembly CT's PT's L1 L2 P1 P1 P2 S1 S2 P2 L S1 P1 P2 S1 S2 S2 P P P S S S 1 2 N N Current inputs Voltage inputs Measuring devices (ie: meters, protection relays ) Bill of material optimized Bill of material with convenient customization (test sockets, feed-through terminals ) 4 CT's PT's 9 CT's PT's Type Order code Qty needed CT s PT s 1 Terminal block ZS10-ST-T4 1SNK50811R Terminal block ZS10-PE-R1 1SNK508151R End section ES10-ST 1SNK508910R Lateral jumper bars PC8-R1 1SNA400711R Short-circuit bridges SC-JB8-2 1SNK900652R Type Order code Qty needed CT s PT s 1 Terminal block ZS10-ST-T4 1SNK50811R Terminal block ZS10-R1 1SNK508011R Terminal block ZS10-ST-1 1SNK50812R Terminal block ZS10-PE-R1 1SNK508151R End section ES10-ST 1SNK508910R Short-circuit bridges SC-JB8-2 1SNK900652R Test socket AL4-M 1SNA206721R Insulated test socket AJS9 1SNA179726R Lateral jumper bars PC8-R1 1SNA400711R SNK160058S0201 ABB SNK series - Terminal blocks 125

128 ZS10-ST screw clamp terminal blocks Test disconnect with sliding link - 8 mm 0.15 in spacing 10 mm² 6 AWG Secure your disconnect operations in control circuits with the robust sliding link operated with a screwdriver, Customize ZS10-ST with colored test sockets in order to identify conveniently each phase of the Current Transformer or Potential Transformers secondary circuits, Fully compatible with the ZS10-ST-T4 accessories. ZS10-ST " " " " 1SNK161065F0014 Disconnect Grey ZS10-ST 1SNK50810R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 1 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A5-B5 Screw clamp Flat screwdriver 2 conductors Rigid - Solid / Stranded mm² AWG Tool Ø.5 mm per clamp Flexible mm² Ø 0.18 in with twin ferrule mm² AWG Torque 1. N.m ± 0. Rated current / Rated cross section 50 A / 10 mm² 5 A / 6 AWG 11.5 lb.in ± 2.65 Rated short-time withstand current (1s) 1200 A Disconnect device Flat screwdriver Tool Ø.5 mm Rated voltage 60 V 00 V Ø 0.18 in Impulse withstand voltage 8000 V Torque N.m Protection IP20 NEMA lb.in 8 mm 0.15 in spacing The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2 mm in Dark grey ES10-ST 1SNK508910R Jumper bars 2 poles Orange JB8-2-R1 1SNK908902R poles JB8--R1 1SNK90890R poles JB8-4-R1 1SNK908904R poles JB8-5-R1 1SNK908905R poles JB8-10-R1 1SNK908910R Circuit separators mm in Dark grey CS-R 1SNK900107R Test sockets Test sockets DIA 4 mm in Yellow AJS9 1SNA179726R Black AJS9-BK 1SNA206680R Green AJS9-GN 1SNA206681R Grey AJS9-GR 1SNA206682R Blue AJS9-BL 1SNA20668R Red AJS9-RD 1SNA206720R DIA 4 mm in - H=12 mm in - M screw AL4-M 1SNA206721R Terminal block Blank card White MC812 1SNK160000R markers Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Blank card MC812PA 1SNK169999R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Screw clamp terminal blocks Feed-through Profile aligned with ZS10-ST... Grey ZS10-R1 1SNK508011R ZS10-R1 ZS10-PE-R1 Ground Profile aligned with ZS10-ST... Green-yellow ZS10-PE-R1 1SNK508151R Technical data valid for copper conductors only. 126 ABB SNK series - Terminal blocks 1SNK161056S Rev. B

129 ZS10-ST-1 screw clamp terminal blocks Test disconnect with sliding link for Potential Transformer circuits 8 mm 0.15 in spacing 10 mm² 6 AWG Test terminal blocks especially designed for Potential Transformers circuits: low profile voltage measurement thanks to the two compact built-in test sockets compatible with DIA 4 mm in test plugs, Installed with our aligned feed-through and ground terminal blocks, you benefit of a complete and compact solution for your PT circuits. ZS10-ST " " 8 mm 0.15 in spacing " " 1SNK161069F0014 Disconnect With 2 test sockets DIA 4 mm in Grey ZS10-ST-1 1SNK50812R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 1 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A5-B5 Screw clamp Flat screwdriver 2 conductors Rigid - Solid / Stranded mm² AWG Tool Ø.5 mm per clamp Flexible mm² Ø 0.18 in with twin ferrule mm² AWG Torque 1. N.m ± 0. Rated current / Rated cross section 50 A / 10 mm² 5 A / 6 AWG 11.5 lb.in ± 2.65 Rated short-time withstand current (1s) 1200 A Disconnect device Flat screwdriver Tool Ø.5 mm Rated voltage 60 V 00 V Ø 0.18 in Impulse withstand voltage 8000 V Torque N.m Protection IP10 NEMA lb.in The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2 mm in Dark grey ES10-ST 1SNK508910R Lateral jumper bars 10 poles Black PC8-10 1SNA161R /6 poles PC8-R1 1SNA400711R /8 poles PC8-R2 1SNA400712R /10 poles PC8-R 1SNA40071R /4 poles PC8-R4 1SNA400724R /7 poles PC8-R5 1SNA400842R / poles PC8-R6 1SNA40084R Circuit separators mm in Dark grey CS-R 1SNK900107R Protecting cover kits Dark grey KCO 1SNK900624R Protecting covers 1 m 9.4 in length Transparent CO 1SNK900604R Terminal block Blank card White MC812 1SNK160000R markers Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Blank card MC812PA 1SNK169999R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. ZS10-R1 ZS10-PE-R1 Screw clamp terminal blocks Feed-through Profile aligned with ZS10-ST... Grey ZS10-R1 1SNK508011R Ground Profile aligned with ZS10-ST... Green-yellow ZS10-PE-R1 1SNK508151R Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 127 1SNK161062S Rev. B

130 ZS10-ST-T4 screw clamp terminal blocks Test disconnect with sliding link for Current Transformer circuits 8 mm 0.15 in spacing ZS10-ST-T " " 8 mm 0.15 in spacing 10 mm² 6 AWG " " " 1SNK161066F " Test terminal blocks especially designed for Current Transformers circuits: easy and safe current measurement thanks to the two insulated built-in test sockets compatible with IP20 DIA 4 mm in test plugs (per IEC ), convenient short-circuit operations with the SC-JB insulated sliding bridges. Disconnect With two yellow test sockets DIA 4 mm in Grey ZS10-ST-T4 1SNK50811R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 1 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A5-B5 Screw clamp Flat screwdriver 2 conductors Rigid - Solid / Stranded mm² AWG Tool Ø.5 mm per clamp Flexible mm² Ø 0.18 in with twin ferrule mm² AWG Torque 1. N.m ± 0. Rated current / Rated cross section 50 A / 10 mm² 5 A / 6 AWG 11.5 lb.in ± 2.65 Rated short-time withstand current (1s) 1200 A Disconnect device Flat screwdriver Tool Ø.5 mm Rated voltage 60 V 00 V Ø 0.18 in Impulse withstand voltage 8000 V Torque N.m Protection IP20 NEMA lb.in Test socket Flat screwdriver Tool Ø.5 mm Ø 0.18 in Torque N.m lb.in The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2 mm in Dark grey ES10-ST 1SNK508910R Lateral jumper bars 10 poles Black PC8-10 1SNA161R /6 poles PC8-R1 1SNA400711R /8 poles PC8-R2 1SNA400712R /10 poles PC8-R 1SNA40071R /4 poles PC8-R4 1SNA400724R /7 poles PC8-R5 1SNA400842R / poles PC8-R6 1SNA40084R Circuit separators mm in Dark grey CS-R 1SNK900107R Protecting cover kits Dark grey KCO 1SNK900624R Protecting covers 1 m 9.4 in length Transparent CO 1SNK900604R Short circuit 2 poles Yellow SC-JB8-2 1SNK900652R bridges poles SC-JB8-1SNK90065R poles SC-JB8-4 1SNK900654R Terminal block markers Blank card White MC812 1SNK160000R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Blank card MC812PA 1SNK169999R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. Screw clamp terminal blocks Feed-through Profile aligned with ZS10-ST... Grey ZS10-R1 1SNK508011R ZS10-R1 ZS10-PE-R1 Ground Profile aligned with ZS10-ST... Green-yellow ZS10-PE-R1 1SNK508151R Technical data valid for copper conductors only. 128 ABB SNK series - Terminal blocks 1SNK161057S Rev. B

131 ZS10-R1 screw clamp terminal blocks Feed-through - 8 mm 0.15 in spacing 10 mm² 6 AWG With the same profile as the ZS10-ST..., the feed-through ZS10-R1 allows you to fully implement the electrical drawing of your CT or PT circuits, Fully compatible with the ZS10-ST... accessories. Feed-through Profile aligned with ZS10-ST... Grey ZS10-R1 1SNK508011R ZS10-R " " " 1SNK161068F0014 Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 1 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A5-B5 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 57 A / 10 mm² 62 A / 6 AWG Rated short-time withstand current (1s) 1200 A Torque 1. N.m ± 0. Short Circuit Current Rating (with specific conditions) 11.5 lb.in ± 2.65 Rated voltage 60 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA " 8 mm 0.15 in spacing The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2 mm in Dark grey ES10-ST 1SNK508910R Jumper bars 2 poles Orange JB8-2-R1 1SNK908902R poles JB8--R1 1SNK90890R poles JB8-4-R1 1SNK908904R poles JB8-5-R1 1SNK908905R poles JB8-10-R1 1SNK908910R Lateral jumper bars 10 poles Black PC8-10 1SNA161R /6 poles PC8-R1 1SNA400711R /8 poles PC8-R2 1SNA400712R /10 poles PC8-R 1SNA40071R /4 poles PC8-R4 1SNA400724R /7 poles PC8-R5 1SNA400842R / poles PC8-R6 1SNA40084R Circuit separators mm in Dark grey CS-R 1SNK900107R Terminal block Blank card White MC812 1SNK160000R markers Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Blank card MC812PA 1SNK169999R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161059S Rev. B Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 129

132 ZS10-PE-R1 screw clamp terminal blocks Ground - 8 mm 0.15 in spacing 10 mm² 6 AWG With the same profile as the ZS10-ST..., the ground ZS10-PE-R1 allows you to fully implement the electrical drawing of your CT or PT circuits, Fully compatible with the ZS10-ST... accessories, Short-circuit performances above the requirements of IEC terminal block standard, Secured snap on or remove from the rail. 1SNK161067F0014 Ground Profile aligned with ZS10-ST... Green-yellow ZS10-PE-R1 1SNK508151R ZS10-PE-R " " 8 mm 0.15 in spacing " " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 1 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A5-B5 Tool Flat screwdriver Ø.5 mm Ø 0.18 in Rated cross section 10 mm² 6 AWG Rated short-time withstand current (1s) 1200 A 1596 A Torque 1. N.m ± lb.in ± 2.65 Protection IP20 NEMA 1 The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2 mm in Dark grey ES10-ST 1SNK508910R Jumper bars 2 poles Orange JB8-2-R1 1SNK908902R poles JB8--R1 1SNK90890R poles JB8-4-R1 1SNK908904R poles JB8-5-R1 1SNK908905R poles JB8-10-R1 1SNK908910R Lateral jumper bars 10 poles Black PC8-10 1SNA161R /6 poles PC8-R1 1SNA400711R /8 poles PC8-R2 1SNA400712R /10 poles PC8-R 1SNA40071R /4 poles PC8-R4 1SNA400724R /7 poles PC8-R5 1SNA400842R / poles PC8-R6 1SNA40084R Circuit separators mm in Dark grey CS-R 1SNK900107R Terminal block Blank card White MC812 1SNK160000R markers Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Blank card MC812PA 1SNK169999R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK161058S Rev. B Technical data valid for copper conductors only. 10 ABB SNK series - Terminal blocks

133 PB-125 ABB SNK series - Terminal blocks 11

134 4 Summary_4 12 ABB SNK series - Terminal blocks

135 SNK series, terminal blocks Pluggable technology Technologies presentation 14 Overview 18 PI-Spring - Feed-through 2.5 mm² / 12 AWG ZDK CDK mm² / 10 AWG ZDK CDK4 14 Screw - Feed-through 4 mm² / 10 AWG ZDS CDS4 145 ZDS4-22-R1 146 CDK4-R Summary_4 ABB SNK series - Terminal blocks 1

136 SNK series, terminal blocks Pluggable technology PI-Spring/Pluggable Screw clamp/pluggable Smart Connections Reliable in harsh conditions Combine the benefits of our smart connections with the flexibility of the pluggable technology. Qualified for worldwide applications such as marine or railways, withstanding the most severe vibration and shock tests. RoHS Smart Logistics Cost effective solutions Create your own assemblies without tooling: Easily snap together multiple plugs Eliminate stock of pre-configured plugs. Reduce your stock of unitary plugs: With only 2 plug variants needed. Only two plug variants are required to compose harnesses up to 15 poles. Smart Design Safety and protection Eliminate connection errors with coding pegs: Simply insert the pegs to create a coding sequence. Secure your wiring against accidental tearing: Automatic locking function Lock safely 2 to 8 plugs with only one locking device. Convenient coding pegs. Locking devices available as well equipped with cable clamp. 1SNK164014S ABB SNK series - Terminal blocks

137 Pluggable technology allows to increase productivity and secure the installation. Serialize plugs harnesses Instead of one to one wiring, the wires are combined in one single plug harness. Production and testing of harnesses can be serialized and outsourced. TESTED Subassemblies Subassemblies Subassemblies Mounting time reduced by 90% Control panel Reduce the mounting and testing time of the whole equipment by connecting subassemblies with pluggable terminal blocks and harnesses. Ease the factory commissioning. Disconnect for transportation Easily disconnect the harnesses if needed for convenient transportation of big equipment. Quickly secure on-site reconnection Secure on-site installation: Final reconnection is done in few quick steps and fully secured thanks to error-free coding system. Facilitate final commissioning. Switchgear panels Industry HVAC Elevators Rolling stocks Marine 1SNK164014S0201 ABB SNK series - Terminal blocks 15

138 SNK series, terminal blocks Pluggable technology Range overview from 2.5 to 4 mm² PI-Spring/Pluggable 2x2 Connections Plugs Compact plug Save up to 15% in height Reduced plug variants Only two plugs variants to create assemblies No need of end section between 2.5 and 4 mm² terminal blocks Voltage test Screwdriver entry point accepts category II probes 16 ABB SNK series - Terminal blocks

139 Screw clamp/pluggable 2x2 Connections Locking devices Secure wiring against accidental pulling Convenient coding pegs Guarantee error free plugs insertion 1SNK16401S0201 ABB SNK series - Terminal blocks 17

140 SNK series, terminal blocks Pluggable PI-Spring technology 4 Feed-through Female plugs Closed female plugs Section 2.5 mm² 12 AWG ZDK CDK2.5 CDK2.5-E 4 mm² 10 AWG ZDK4-22 CDK4 CDK4-E Screw clamp technology Feed-through Female plugs Closed female plugs Section 4 mm² 10 AWG ZDS4-22 CDS4 CDS4-E ZDS4-22-R1 CDS4-R1 Clamp - Channels for jumpering or testing - Test socket - Blown-fuse indicator 1SNK164018S ABB SNK series - Terminal blocks

141 4 PB-2 ABB SNK series - Terminal blocks 19

142 ZDK pluggable terminal blocks PI-Spring - Feed-through mm in spacing 2.5 mm² 12 AWG 1SNK16209V0014 Increase your productivity with pluggable terminal blocks: pre-produced plug harnesses save time and preparation with easily installed "plug and play" sub-assemblies, reduced transportation panels preparation and final installation, easily connect sub-assemblies together, Simplify and secure your installation: in site faulty connection errors are eliminated, prior connection testing is eased and reliable, test connectors (TC5) withstanding operations are compatible for convenient testing. Feed-through 4 connections Grey ZDK SNK805010R ZDK " " 5.2 mm in spacing " " " " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm per clamp Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG 2 conductors per clamp Flexible with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Rated current / Rated cross section 24 A / 2.5 mm² 22 A / 12 AWG Rated short-time withstand current (1s) 00 A Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Flat screwdriver Ø.5 mm Ø 0.18 in The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV CDK2.5 CDK2.5-E Female plugs Female plugs 1 pole Grey CDK2.5 1SNK805712R Female plugs without outer nubs - Closed CDK2.5-E 1SNK80571R poles max End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey EDK SNK805910R Jumper bars 2 poles 2 A 0 A Orange JB5-2 1SNK90502R poles 2 A 0 A JB5-1SNK9050R poles 2 A 0 A JB5-4 1SNK90504R poles 2 A 0 A JB5-5 1SNK90505R poles 2 A 0 A JB5-10 1SNK90510R poles 2 A 0 A JB5-50 1SNK90550R Cross spacing jumpers 2 A 0 A Orange JB85-1SNK90060R Circuit separators mm in Dark grey CS-R 1SNK900107R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in Dark grey TC5 1SNK900200R TC5-R1 1SNK900201R Coding pegs Dark grey COP-ZD 1SNK90066R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK164001S Rév. A Technical data valid for copper conductors only. 140 ABB SNK series - Terminal blocks

143 CDK2.5 female plugs PI-Spring mm in spacing 1SNK160291V mm² 12 AWG 1SNK160292V0014 Create your own female plug assemblies without any special tools: easily snap together multiple plugs for optimal ergonomics and quick assembly, Increase your flexibility: eliminate stock of pre-configured female plugs, easily add an extra plug in case of needed modification, Reduce your stock of unitary plugs up to 0%: only two plug variants are required to compose your own subsets of plugs from 2 to 15 poles. Female plugs Grey CDK2.5 1SNK805712R Female plugs without outer nubs - Closed CDK2.5-E 1SNK80571R CDK2.5 CDK2.5-E Connecting capacity IEC UL - CSA Rail " 1 conductor per clamp Rigid - Solid / Stranded mm² AWG Wire stripping 11 mm Flexible mm² length 0.4 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " " 2 conductors per clamp Flexible with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Rated current / Rated cross section 24 A / 2.5 mm² 22 A / 12 AWG Rated short-time withstand current (1s) 00 A Flat screwdriver Ø.5 mm Ø 0.18 in 5.2 mm in spacing Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV 15 poles max Locking devices 9.4 mm 0.70 in spacing Black VR-ZD 1SNK90067R VR-ZD-R1 1SNK90068R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Blank strip label MG-CPMFA SNB04196R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK164005S Rév. A Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 141

144 ZDK4-22 pluggable terminal blocks PI-Spring - Feed-through - 6 mm 0.26 in spacing 4 mm² 10 AWG 1SNK162094V0014 Increase your productivity with pluggable terminal blocks: pre-produced plugs harnesses save time and preparation with easily installed "plug and play" sub-assemblies, Simplify and secure your installation: in site faulty connection errors are eliminated, prior connection testing is eased and reliable, test connectors (TC5-R1 + ES-TC6) withstanding operations are compatible for convenient testing. Feed-through 4 connections Grey ZDK4-22 1SNK806010R ZDK " Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 12.5 mm per clamp Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " 6 mm 0.26 in spacing " " " " 2 conductors per clamp Flexible with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Rated current / Rated cross section 0 A / 4 mm² 0 A / 10 AWG Rated short-time withstand current (1s) 480 A Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 Flat screwdriver Ø.5 mm Ø 0.18 in The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV CDK4 CDK4-E Female plugs Female plugs 1 pole Grey CDK4 1SNK806712R Female plugs without outer nubs - Closed CDK4-E 1SNK80671R poles max End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 2.2 mm in Dark grey EDK SNK805910R Jumper bars 2 poles 41 A 0 A Orange JB6-2 1SNK90602R poles 41 A 0 A JB6-1SNK9060R poles 41 A 0 A JB6-4 1SNK90604R poles 41 A 0 A JB6-5 1SNK90605R poles 41 A 0 A JB6-10 1SNK90610R poles 41 A 0 A JB6-50 1SNK90650R Cross spacing jumpers 2 A 0 A Orange JB85-1SNK90060R Circuit separators mm in Dark grey CS-R 1SNK900107R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Coding pegs Dark grey COP-ZD 1SNK90066R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK164002S Rév. A Technical data valid for copper conductors only. 142 ABB SNK series - Terminal blocks

145 CDK4 female plugs PI-Spring - 6 mm 0.26 in spacing 1SNK16029V mm² 10 AWG 1SNK160294V0014 Create your own female plug assemblies without any special tools: easily snap together multiple plugs for optimal ergonomics and quick assembly, Increase your flexibility: eliminate stock of pre-configured female plugs, easily add an extra plug in case of needed modification, Reduce your stock of unitary plugs up to 0%: only two plug variants are required to compose your own subsets of plugs from 2 to 15 poles. Female plugs Grey CDK4 1SNK806712R Female plugs without outer nubs - Closed CDK4-E 1SNK80671R CDK4 CDK4-E Connecting capacity IEC UL - CSA Rail " 1 conductor per clamp Rigid - Solid / Stranded mm² AWG Wire stripping 12.5 mm Flexible mm² length in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG " " 2 conductors per clamp Flexible with twin ferrule mm² AWG Tool (for flexible conductor without ferrule) Rated current / Rated cross section 0 A / 4 mm² 0 A / 10 AWG Rated short-time withstand current (1s) 480 A Flat screwdriver Ø.5 mm Ø 0.18 in 6 mm 0.26 in spacing Rated voltage 1000 V 600 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV 15 poles max Locking devices 9.4 mm 0.70 in spacing Black VR-ZD 1SNK90067R VR-ZD-R1 1SNK90068R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank strip label White MG-CPMFA SNB04196R Blank marker MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK164006S Rév. A Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 14

146 ZDS4-22 pluggable terminal blocks Screw clamp - Feed-through mm in spacing ZDS " " 5.2 mm in spacing 4 mm² 10 AWG " " " " 1SNK16117V0014 Increase your productivity with pluggable terminal blocks: pre-produced plug harnesses save time and preparation with easily installed "plug and play" sub-assemblies, reduced transportation panels preparation and final installation, easily connect sub-assemblies together, Simplify and secure your installation: in site faulty connection errors are eliminated, prior connection testing is eased and reliable, test connectors (TC5) withstanding operations are compatible for convenient testing. Feed-through 4 connections Grey ZDS4-22 1SNK80501R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 10.5 mm per clamp Flexible mm² length 0.41 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 29 A / 4 mm² 28 A / 10 AWG Rated short-time withstand current (1s) 480 A Torque 0.6 N.m ± lb.in ± Rated voltage 800 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV CDS4 CDS4-E Female plugs Female plugs 1 pole Grey CDS4 1SNK805714R Female plugs without outer nubs - Closed CDS4-E 1SNK805715R poles max End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R End sections 0.8 mm 0.01 in Dark grey EDS4-22 1SNK805911R Jumper bars 2 poles 2 A 0 A Orange JB5-2 1SNK90502R poles 2 A 0 A JB5-1SNK9050R poles 2 A 0 A JB5-4 1SNK90504R poles 2 A 0 A JB5-5 1SNK90505R poles 2 A 0 A JB5-10 1SNK90510R poles 2 A 0 A JB5-50 1SNK90550R Circuit separators mm in Dark grey CS-R 1SNK900107R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in Dark grey TC5 1SNK900200R TC5-R1 1SNK900201R Coding pegs Dark grey COP-ZD 1SNK90066R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK16400S Rév. A Technical data valid for copper conductors only. 144 ABB SNK series - Terminal blocks

147 CDS4 female plugs Screw clamp mm in spacing 1SNK160295V mm² 10 AWG 1SNK160296V0014 Create your own female plug assemblies without any special tools: easily snap together multiple plugs for optimal ergonomics and quick assembly, Increase your flexibility: eliminate stock of pre-configured female plugs, easily add an extra plug in case of needed modification, Reduce your stock of unitary plugs up to 0%: only two plug variants are required to compose your own subsets of plugs from 2 to 15 poles. Female plugs Grey CDS4 1SNK805714R Female plugs without outer nubs - Closed CDS4-E 1SNK805715R CDS4 CDS4-E Connecting capacity IEC UL - CSA Rail " " " 5.2 mm in spacing 1 conductor Rigid - Solid / Stranded mm² AWG Wire stripping 10.5 mm per clamp Flexible mm² length 0.41 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 29 A / 4 mm² 28 A / 10 AWG Rated short-time withstand current (1s) 480 A Torque 0.6 N.m ± lb.in ± Rated voltage 800 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV 15 poles max Locking devices 9.4 mm 0.70 in spacing Black VR-ZD 1SNK90067R VR-ZD-R1 1SNK90068R Terminal block Blank card White MC512 1SNK140000R markers MC512PA 1SNK149999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041790R Blank strip label MG-CPMFA SNB04196R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK164007S Rév. A Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 145

148 ZDS4-22-R1 pluggable terminal blocks Screw clamp - Feed-through - 6 mm 0.26 in spacing ZDS4-22-R " " 6 mm 0.26 in spacing 4 mm² 10 AWG " " " " 1SNK16118V0014 Increase your productivity with pluggable terminal blocks: pre-produced plugs harnesses save time and preparation with easily installed "plug and play" sub-assemblies, Simplify and secure your installation: in site faulty connection errors are eliminated, prior connection testing is eased and reliable, test connectors (TC5-R1 + ES-TC6) withstanding operations are compatible for convenient testing. Feed-through 4 connections Grey ZDS4-22-R1 1SNK80601R Connecting capacity IEC UL - CSA Rail TH 5-7.5, TH conductor Rigid - Solid / Stranded mm² AWG Wire stripping 10.5 mm per clamp Flexible mm² length 0.41 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 29 A / 4 mm² 28 A / 10 AWG Rated short-time withstand current (1s) 480 A Torque 0.6 N.m ± lb.in ± Rated voltage 800 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV CDS4-R1 CDS4-E Female plugs Female plugs 1 pole Grey CDS4-R1 1SNK806714R Female plugs without outer nubs - Closed CDS4-E 1SNK805715R poles max End stops 10 mm 0.94 in Dark grey BAM 1SNK900001R Jumper bars 2 poles 41 A 0 A Orange JB6-2 1SNK90602R poles 41 A 0 A JB6-1SNK9060R poles 41 A 0 A JB6-4 1SNK90604R poles 41 A 0 A JB6-5 1SNK90605R poles 41 A 0 A JB6-10 1SNK90610R poles 41 A 0 A JB6-50 1SNK90650R Circuit separators mm in Dark grey CS-R 1SNK900107R Test adapters For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R For test plugs DIA 4 mm in TP4 1SNK900205R Test connectors 5.2 mm in Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in Dark grey ES-TC6 1SNK900105R Coding pegs Dark grey COP-ZD 1SNK90066R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank marker White MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK164004S Rév. A Technical data valid for copper conductors only. 146 ABB SNK series - Terminal blocks

149 CDS4-R1 female plugs Screw clamp - 6 mm 0.26 in spacing 1SNK160297V mm² 10 AWG 1SNK160296V0014 Create your own female plug assemblies without any special tools: easily snap together multiple plugs for optimal ergonomics and quick assembly, Increase your flexibility: eliminate stock of pre-configured female plugs, easily add an extra plug in case of needed modification, Reduce your stock of unitary plugs up to 0%: only two plug variants are required to compose your own subsets of plugs from 2 to 15 poles. Female plugs Grey CDS4-R1 1SNK806714R Female plugs without outer nubs - Closed CDS4-E 1SNK805715R CDS4-R1 CDS4-E Connecting capacity IEC UL - CSA Rail " " " 6 mm 0.26 in spacing 1 conductor Rigid - Solid / Stranded mm² AWG Wire stripping 10.5 mm per clamp Flexible mm² length 0.41 in with non insulated ferrule mm² AWG with insulated ferrule mm² AWG Gauge A-B 2 conductors Rigid - Solid / Stranded mm² AWG Tool Flat screwdriver per clamp Flexible mm² Ø.5 mm with twin ferrule mm² AWG Ø 0.18 in Rated current / Rated cross section 29 A / 4 mm² 28 A / 10 AWG Rated short-time withstand current (1s) 480 A Torque 0.6 N.m ± lb.in ± Rated voltage 800 V 00 V Impulse withstand voltage 8000 V Protection IP20 NEMA 1 The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors). All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. CE CB RoHS USR CNR CSA EAC BV 15 poles max Locking devices 9.4 mm 0.70 in spacing Black VR-ZD 1SNK90067R VR-ZD-R1 1SNK90068R Terminal block Blank card White MC612 1SNK150000R markers MC612PA 1SNK159999R Universal wire markers holder Grey UMH 1SNK900611R Blank strip label White MG-CPMFA SNB04196R Blank marker MG-CPM SNB041791R Complete list of accessories is indicated in the terminal block datasheet including end stops. Some accessories such as jumper bars may modify the terminal block's ratings: Complete information available in the accessories section of the catalog. 1SNK164008S Rév. A Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 147

150 5 Summary_5 148 ABB SNK series - Terminal blocks

151 SNK series, terminal block accessories Common terminal block accessories Mounting rail PR 150 Screw end stops BAM, BAZH1 15 Screwless end stops BAZ1 154 Label holders LH-R1, LH 155 Screwless jumper bars JB5 156 JB6 157 JB8 158 JB JB Cross spacing jumpers JB Test adapters TP2, TP4 162 Test connectors TC5 16 Component plugs PG5-R2 164 PG5, PG5-R1 165 Screwdrivers TO 166 Crimping tools PS PI-Spring terminal block accessories End sections EK 167 Circuit separators CS-R2, CS-R 169 Shield connectors SHB, SHBP 170 Screw clamp terminal block accessories End sections ES 171 Screw jumper bars JB8 17 JB16, JB JB Lateral jumper bars PC8 176 Circuit separator CS, CS-R1 177 Shield connectors SHB, SHBS 178 Protecting covers PL 179 CO, KCO 180 Short circuit bridges SC-JB8 181 Test sockets AJS9 182 Pluggable terminal block accessories End sections EDK, EDS 18 Coding pegs COP 184 Locking devices VR 184 Summary_5 ABB SNK series - Terminal blocks 149

152 PR mounting rail Common terminal block accessories PR0 1SNK500072F0000 Prepunched symmetrical mounting rail, The oblong holes ease the mounting and allow to use existing and/or numerous fixings, Particularly well designed for fixing onto back-plates and for terminal assemblies of small dimensions. Prepunched rail PR0 1SNA17220R Please note that for all rails: 1 part number equal 1 meter (9 in). Packing of 2 meters (78 in) minimum. Check that your order quantity is a multiple of 2. 5 Material Zinc plating and passivation steel Rail IEC UL - CSA Equivalent E-Cu cross section All the main technical data provided are "manufacturer" values. RoHS 2000 mm 78 in spacing in order to guarantee the performances and security of your installation, please ensure the rail and its fixings can withstand the static and dynamic loads of the components mounted on it; to prevent the rail from flexing (1 mm 0.09 in rail thickness only), fixing is recommended every 250 mm 9.84 in; to prevent any issues during mounting, screw heads used for rail fixing should not protrude from the rail (7,5 mm in rail height only). PR.Z2 1SNK50007F0000 Symmetrical mounting rail complying with IEC60715, Particularly well designed for fixing onto back-plates and for terminal assemblies of small dimensions. PR.Z2 1SNA17400R Please note that for all rails: 1 part number equal 1 meter (9 in). Packing of 2 meters (78 in) minimum. Check that your order quantity is a multiple of 2. Material Zinc plating and passivation steel Rail TH IEC UL - CSA Equivalent E-Cu cross section 16 mm² 4 AWG All the main technical data provided are "manufacturer" values. RoHS 2000 mm 78 in spacing in order to guarantee the performances and security of your installation, please ensure the rail and its fixings can withstand the static and dynamic loads of the components mounted on it; to prevent the rail from flexing (1 mm 0.09 in rail thickness only), fixing is recommended every 250 mm 9.84 in; to prevent any issues during mounting, screw heads used for rail fixing should not protrude from the rail (7,5 mm in rail height only). 1SNK160017S Rev. B 150 ABB SNK series - Terminal blocks

153 PR mounting rail Common terminal block accessories PR.G2 1SNK50007F0000 Symmetrical mounting rail made of galvanised steel, complying with IEC60715, Particularly well designed for fixing onto back-plates and for terminal assemblies of small dimensions. PR.G2 1SNA164800R000 2 Please note that for all rails: 1 part number equal 1 meter (9 in). Packing of 2 meters (78 in) minimum. Check that your order quantity is a multiple of 2. Material Galvanised steel Rail TH IEC UL - CSA Equivalent E-Cu cross section 16 mm² 4 AWG All the main technical data provided are "manufacturer" values. 5 RoHS 2000 mm 78 in spacing in order to guarantee the performances and security of your installation, please ensure the rail and its fixings can withstand the static and dynamic loads of the components mounted on it; to prevent the rail from flexing (1 mm 0.09 in rail thickness only), fixing is recommended every 250 mm 9.84 in; to prevent any issues during mounting, screw heads used for rail fixing should not protrude from the rail (7,5 mm in rail height only). PR50 1SNK500074F0000 Prepunched symmetrical mounting rail, The oblong holes ease the mounting and allow to use existing and/or numerous fixings. Prepunched rail PR50 1SNA178529R Please note that for all rails: 1 part number equal 1 meter (9 in). Packing of 2 meters (78 in) minimum. Check that your order quantity is a multiple of 2. Material Rail Zinc plating and passivation steel IEC Equivalent E-Cu cross section All the main technical data provided are "manufacturer" values. UL - CSA RoHS 2000 mm 78 in spacing in order to guarantee the performances and security of your installation, please ensure the rail and its fixings can withstand the static and dynamic loads of the components mounted on it; to prevent the rail from flexing, fixing is recommended every 500 mm 19.7 in; in order to increase the accessibility of your terminal assembly, we recommend the use of our rail offset brackets EM45 (order code 1SNA008521R2600) for a 45 orientation of the rail. 1SNK160040S Rev. B ABB SNK series - Terminal blocks 151

154 PR mounting rail Common terminal block accessories PR5 1SNK500075F0000 Symmetrical mounting rail. PR5 1SNA168700R Please note that for all rails: 1 part number equal 1 meter (9 in). Packing of 2 meters (78 in) minimum. Check that your order quantity is a multiple of 2. Material Rail Zinc plating and passivation steel 5 IEC Equivalent E-Cu cross section All the main technical data provided are "manufacturer" values. UL - CSA RoHS 2000 mm 78 in spacing in order to guarantee the performances and security of your installation, please ensure the rail and its fixings can withstand the static and dynamic loads of the components mounted on it; to prevent the rail from flexing, fixing is recommended every 500 mm 19.7 in; in order to increase the accessibility of your terminal assembly, we recommend the use of our rail offset brackets EM45 (order code 1SNA008521R2600) for a 45 orientation of the rail. PR4 1SNK500076F0000 Symmetrical mounting rail complying with IEC60715, The rigidity of the rail is maximised by the 2. mm in thickness of the rail, and by its solid, non slotted construction, PR4 TH 5-15 is the most rigid mounting rail solution and it can support any electrical devices. Recommended for SNK ground terminal blocks up to 5 mm² 2 AWG PR4 1SNA168500R Please note that for all rails: 1 part number equal 1 meter (9 in). Packing of 2 meters (78 in) minimum. Check that your order quantity is a multiple of 2. Material Zinc plating and passivation steel Rail TH 5-15 IEC UL - CSA Equivalent E-Cu cross section 50 mm² 0 AWG All the main technical data provided are "manufacturer" values. RoHS 2000 mm 78 in spacing in order to guarantee the performances and security of your installation, please ensure the rail and its fixings can withstand the static and dynamic loads of the components mounted on it; to prevent the rail from flexing, fixing is recommended every 700 mm 27.6 in; in order to increase the accessibility of your terminal assembly, we recommend the use of our rail offset brackets EM45 (order code 1SNA008521R2600) for a 45 orientation of the rail. 1SNK160041S Rev. B 152 ABB SNK series - Terminal blocks

155 Screw end stops Common terminal block accessories BAM " " 10 mm 0.94 in spacing " " 1SNK16002V0000 BAM screw end stops Give efficient support to the SNK terminal blocks assemblies thanks to the BAM double gripping rail contact, Ease the assemblies identification with the BAM marking location compatible with all SNK markers and labels. 10 mm 0.94 in spacing Dark grey BAM 1SNK900001R Material specifications Insulating material Polyamide Rail TH 5-7.5, Flammability V0 TH 5-15 NF F I2F2 Tool Flat screwdriver Ambient temperature Service IEC C F Ø 5.5 mm min/max Storage C F Ø in Installing C F Torque 1. N.m ± lb.in ± 0.88 All the main technical data provided are "manufacturer" values. RoHS Blank card In polycarbonate White MC812 1SNK160000R In polyamide MC812PA 1SNK169999R Label holder 10 mm 0.94 in width Dark grey LH 1SNK900605R mm in width LH-R1 1SNK900607R Universal wire markers holder 5.2 mm in spacing Grey UMH 1SNK900611R Self adhesive strip For 8 mm 0.15 in spacing terminal blocks White SAT8 1SNK900616R BAZH " " 10 mm 0.94 in spacing " " 1SNK160094F0014 BAZH1 screw end stops Give efficient support to the SNK double deck or power terminal blocks assemblies thanks to the BAZH1 double gripping rail contact, Ease the assemblies identification with label holders. 10 mm 0.94 in spacing Dark grey BAZH1 1SNK900102R Material specifications Insulating material Polyamide Rail TH 5-7.5, Flammability V0 TH 5-15 NF F I2F2 Tool Flat screwdriver Ambient temperature Service IEC C F Ø 5.5 mm min/max Storage C F Ø in Installing C F Torque 1. N.m ± lb.in ± 0.88 All the main technical data provided are "manufacturer" values. RoHS Label holder 10 mm 0.94 in width Dark grey LH 1SNK900605R mm in width LH-R1 1SNK900607R SNK160026S Rev. B ABB SNK series - Terminal blocks 15

156 Screwless end stops Common terminal block accessories BAZ1 1SNK160160F0014 BAZ1 screwless end stops Reduce the size of your terminal block assemblies with the screwless reduced spacing BAZ1 end stop, Ease the assemblies identification with various markers and label holders. 5.2 mm in spacing Dark grey BAZ1 1SNK900002R " " " Material specifications Insulating material Polyamide Rail TH 5-7.5, Flammability V0 TH 5-15 NF F I2F2 Tool Ambient temperature Service IEC C F min/max Storage C F Installing C F Torque All the main technical data provided are "manufacturer" values " RoHS Blank card In polycarbonate White MC512 1SNK140000R In polyamide MC512PA 1SNK149999R Label holder 10 mm 0.94 in width Dark grey LH 1SNK900605R mm in width LH-R1 1SNK900607R Universal wire markers holder 5.2 mm in spacing Grey UMH 1SNK900611R SNK160002S Rev. B 5.2 mm in spacing 154 ABB SNK series - Terminal blocks

157 Label holders Common terminal block accessories LH-R mm in spacing 1SNK160019F0014 LH-R1 label holders Easily identify your terminal blocks assembly with white or yellow labels, Adjustable in height for best visibility, Compatible with all SNK end stops mm in width Dark grey LH-R1 1SNK900607R Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service IEC C F min/max Storage C F Installing C F 5 All the main technical data provided are "manufacturer" values. RoHS Label For LH-R1 label holder White MCLH-R1 1SNK90061R Yellow MCLH-R1-YL 1SNK90064R LH 10 mm 0.94 in spacing 1SNK160020F0014 LH label holders Easily identify your terminal blocks assembly with white or yellow labels, Adjustable in height for best visibility, Compatible with all SNK end stops. 10 mm 0.94 in width Dark grey LH 1SNK900605R Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service IEC C F min/max Storage C F Installing C F All the main technical data provided are "manufacturer" values. RoHS Label For LH label holder White MCLH 1SNK90060R Yellow MCLH-YL 1SNK9006R SNK16002S Rev. B ABB SNK series - Terminal blocks 155

158 JB5 screwless jumper bars Common terminal block accessories 5 JB5 5.2 mm in spacing 1SNK16014F0014 Facilitate & secure your jumper bar assembly process: Screwless mounting, Pre-cut poles for alternated jumpering between terminal blocks, Insulated, Positive locking. 5.2 mm in spacing 2 poles Orange JB5-2 1SNK90502R poles JB5-1SNK9050R poles JB5-4 1SNK90504R poles JB5-5 1SNK90505R poles JB5-10 1SNK90510R poles JB5-50 1SNK90550R Material specifications Insulating material Polyamide Flammability V0 NF F I2F Ambient temperature Service IEC C F min/max Storage C F Installing C F IEC UL - CSA Ex e Rated current 2 A 0 A Rated voltage Standard use 1000 V 600 V Please consult Cut extremities 800 V 00 V our dedicated Cut poles 400 V 00 V certificates Impulse withstand voltage 8000 V Protection IP20 NEMA 1 All the main technical data provided are "manufacturer" values. RoHS Circuit separators 0 mm 0 in spacing Dark grey CS 1SNK900101R Additional accessories must be installed on the cut side of the jumper bar with cut extremities: Feed-through Double-deck Others ZS CS ES... CS-R1 ZK EK... 1SNK160027S Rev. C 156 ABB SNK series - Terminal blocks

159 JB6 screwless jumper bars Common terminal block accessories JB6 6 mm 0.26 in spacing 1SNK16014F0014 Facilitate & secure your jumper bar assembly process: Screwless mounting, Pre-cut poles for alternated jumpering between terminal blocks, Insulated, Positive locking. 6 mm 0.26 in spacing 2 poles Orange JB6-2 1SNK90602R poles JB6-1SNK9060R poles JB6-4 1SNK90604R poles JB6-5 1SNK90605R poles JB6-10 1SNK90610R poles JB6-50 1SNK90650R Material specifications Insulating material Polyamide Flammability V0 NF F I2F Ambient temperature Service IEC C F min/max Storage C F Installing C F 5 IEC UL - CSA Ex e Rated current 41 A 0 A Rated voltage Standard use 1000 V 600 V 60 V Cut extremities 800 V 00 V 400 V Cut poles 400 V 00 V Consult us Impulse withstand voltage 8000 V Protection IP20 NEMA 1 All the main technical data provided are "manufacturer" values. RoHS Circuit separators 0 mm 0 in spacing Dark grey CS 1SNK900101R Additional accessories must be installed on the cut side of the jumper bar with cut extremities: Feed-through Double-deck Others ZS CS ES... CS-R1 ZK EK... 1SNK160029S Rev. C ABB SNK series - Terminal blocks 157

160 JB8 screwless jumper bars Common terminal block accessories 5 JB8 8 mm 0.15 in spacing 1SNK160146F0014 Facilitate & secure your jumper bar assembly process: Screwless mounting, Pre-cut poles for alternated jumpering between terminal blocks, Insulated, Positive locking. 8 mm 0.15 in spacing 2 poles Orange JB8-2 1SNK90802R poles JB8-1SNK9080R poles JB8-4 1SNK90804R poles JB8-5 1SNK90805R poles JB8-10 1SNK90810R Material specifications Insulating material Polyamide Flammability V0 NF F I2F Ambient temperature Service IEC C F min/max Storage C F Installing C F IEC UL - CSA Ex e Rated current 57 A 42 A Rated voltage Standard use 1000 V 600 V Please consult Cut extremities 800 V 00 V our dedicated Cut poles 400 V 00 V certificates Impulse withstand voltage 6000 V Protection IP20 NEMA 1 All the main technical data provided are "manufacturer" values. RoHS Circuit separators 0 mm 0 in spacing Dark grey CS 1SNK900101R Additional accessories must be installed on the cut side of the jumper bar with cut extremities: Feed-through Double-deck Others ZS CS ES... CS-R1 ZK EK... 1SNK16000S Rev. C 158 ABB SNK series - Terminal blocks

161 JB10 screwless jumper bars Common terminal block accessories JB10 10 mm 0.94 in spacing 1SNK160146F0014 Facilitate & secure your jumper bar assembly process: Screwless mounting, Pre-cut poles for alternated jumpering between terminal blocks, Insulated, Positive locking. 10 mm 0.94 in spacing 2 poles Orange JB10-2 1SNK91002R poles JB10-1SNK9100R poles JB10-4 1SNK91004R poles JB10-5 1SNK91005R poles JB SNK91010R Material specifications Insulating material Polyamide Flammability V0 NF F I2F Ambient temperature Service IEC C F min/max Storage C F Installing C F 5 IEC UL - CSA Ex e Rated current 76 A 42 A Rated voltage Standard use 1000 V 600 V Please consult Cut extremities 800 V 00 V our dedicated Cut poles 400 V 00 V certificates Impulse withstand voltage 6000 V Protection IP20 NEMA 1 All the main technical data provided are "manufacturer" values. RoHS Circuit separators 0 mm 0 in spacing Dark grey CS 1SNK900101R Additional accessories must be installed on the cut side of the jumper bar with cut extremities: Feed-through Double-deck Others ZS CS ES... CS-R1 ZK EK... 1SNK16001S Rev. C ABB SNK series - Terminal blocks 159

162 JB12 screwless jumper bars Common terminal block accessories 1SNK16029V0014 JB12 12 mm in Spacing Facilitate & secure your jumper bar assembly process: Screwless mounting, Insulated, Positive locking. Ordering Details Color Type Order Code Pkg Weight 12 mm in spacing 2 poles Orange JB12-2 1SNK91202R poles JB12-1SNK9120R poles JB12-5 1SNK91205R Main Technical Data Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service IEC C F min/max Storage C F Installing C F IEC UL - CSA Ex e Rated current 76 A 67 A Rated voltage Standard use 1000 V 600 V Please consult Cut extremities 800 V 00 V our dedicated Cut poles 400 V 00 V certificates Impulse withstand voltage 6000 V Protection IP20 NEMA 1 All the main technical data provided are "manufacturer" values. RoHS Additional accessories must be installed on the cut side of the jumper bar with cut extremities: Feed-through Double-deck Others ZS CS ES... CS-R1 ZK EK... 1SNK160071S ABB SNK series - Terminal blocks

163 Cross spacing jumpers Common terminal block accessories 1SNK160054S Rev. C 1SNK160125F0014 JB85-8 mm 0.15 in spacing JB85- cross spacing jumpers Allows power distribution between terminal blocks with different spacing. Standard JB5-, JB6- and JB8- jumpers bar can be used as well as cross spacing jumpers (see selection table on mounting instructions below). Cross spacing jumpers poles Orange JB85-1SNK90060R Material specifications Insulating material Polyamide Flammability V0 NF F I2F Ambient temperature Service IEC C F min/max Storage C F Installing C F 5 IEC UL - CSA Ex e Rated current 76 A 67 A Rated voltage Standard use 1000 V 600 V Please consult Cut extremities 800 V 00 V our dedicated Cut poles 60 V 00 V certificates Impulse withstand voltage 8000 V Protection IP20 NEMA 1 All the main technical data provided are "manufacturer" values. RoHS Mounting Instructions Cross spacing jumper selection between A and B terminal blocks with different spacing. B 5.2 mm 6 mm 8 mm A 6 mm JB mm JB85. JB mm JB85. JB85. JB8. 12 mm JB85. JB6. - Yellow cell: for ZS and ZK terminal blocks Blue cell: for ZS terminal blocks only I1 max + I2 max I max I max I1 max I2 max I max I1 max I2 max I rated Terminal Block ABB SNK series - Terminal blocks 161

164 Test adapters Common terminal block accessories 1SNK16009F0014 TP 7.6 mm in spacing TP2 test adapters Insulated test adapter that enables individual voltage control, Direct plug-in solution into the jumpers channels, Compatible with standard isolated or non isolated test plugs DIA 2 mm in and 2. mm in, Withstand more than operations according to ABB test standards. For test plugs DIA 2 mm in Dark grey TP2 1SNK90020R Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service IEC C F min/max Storage C F Installing C F IEC UL - CSA Ex e Rated current 10 A Rated voltage Standard use 1000 V 600 V Not authorized Impulse withstand voltage 8000 V Protection IP20 NEMA 1 All the main technical data provided are "manufacturer" values. RoHS 1SNK16009F0014 TP4 7.6 mm in spacing TP4 test adapters Isolated test adapter that enables individual voltage control, Direct plug-in solution into the jumpers channels, Compatible with standard insulated or non isolated test plugs DIA 4 mm in, Withstand more than operations according to ABB test standards. For test plugs DIA 4 mm in Dark grey TP4 1SNK900205R Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service IEC C F min/max Storage C F Installing C F IEC UL - CSA Ex e Rated current 16 A Rated voltage Standard use 1000 V 600 V Not authorized Impulse withstand voltage 8000 V Protection IP20 NEMA 1 All the main technical data provided are "manufacturer" values. RoHS 1SNK16006S Rev. B 162 ABB SNK series - Terminal blocks

165 TC5 test connectors Common terminal block accessories ES-TC6 ES-TC8 Ease the testing of terminal block assemblies: Make your own test connector assembly with our modular solution mixing various spacings, Direct plug-in solution into the jumpers channels, Withstand more than operations according to ABB test standards. Connecting capacity IEC UL - CSA Rail TC5-R1 TC5 5.2 mm in spacing TC5-R1 TC5 10 poles max. 1 conductor Rigid - Solid / Stranded mm² Wire stripping 8 mm per clamp Flexible mm² length 0.15 in with non insulated ferrule with insulated ferrule mm² Gauge A1-B1 2 conductors Rigid - Solid / Stranded mm² Tool Flat screwdriver per clamp Flexible mm² Ø 2.5 mm with twin ferrule mm² Ø in Rated current / Rated cross section 16 A / 1.5 mm² Rated short-time withstand current (1s) 180 A Torque 0.5 N.m ± 0.1 Rated voltage 1000 V.4 lb.in ± Impulse withstand voltage 8000 V Protection IP20 NEMA 1 The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards. All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on ABB website. Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service C F Storage C F Installing C F All the main technical data provided are "manufacturer" values. 5 RoHS ES-TC6 TC5-R1 Test connectors for 5.2 mm in spacing terminal blocks Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R poles max. TC5-R1 TC5 ES-TC8 10 poles max. Test connectors for 6 mm 0.26 in spacing terminal blocks Test connectors 5.2 mm in spacing Dark grey TC5-R1 1SNK900201R Spacers 0.8 mm 0.01 in spacing ES-TC6 1SNK900105R Test connectors for 8 mm 0.15 in spacing terminal blocks Test connectors 5.2 mm in spacing Dark grey TC5 1SNK900200R End module, 5.2 mm in TC5-R1 1SNK900201R Spacers 2.8 mm in spacing ES-TC8 1SNK900104R PT- Cable clamps Fit on two C2.5-ZDP plugs and on TC5 test connectors Dark grey PT- 1SNK900625R Blank card In polycarbonate White MC512 1SNK140000R In polyamide MC512PA 1SNK149999R Universal wire markers holder 5.2 mm in spacing Grey UMH 1SNK900611R SNK160042S Rev. C Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 16

166 PG5-R2 component plugs Common terminal block accessories 1SNK160112F " " " Component holder compatible with 5.2 mm in spacing ZS4 feed-through terminal blocks, Fit components 16 x 16 x 8.5 mm 0.60 x 0.60 x 0.5 in (not supplied with plug) such as resistors, diodes, varistors, Direct plug-in into the terminal blocks jumper channels, Maximum dissipatived power: 2 W. Components insertion between 2 blocks Dark grey PG5-R2 1SNK90040R Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service IEC C F min/max Storage C F Installing C F IEC UL - CSA Rated current Rated voltage 250 V Impulse withstand voltage 4000 V Protection IP20 NEMA 1 All the main technical data provided are "manufacturer" values. RoHS Blank card In polycarbonate White MC512 1SNK140000R In polyamide MC512PA 1SNK149999R Universal wire markers holder 5.2 mm in spacing Grey UMH 1SNK900611R SNK16009S Rev. C " PG5-R mm 0.92 in spacing 5 Open the PG5-R2 with a flat screwdriver DIA..5 mm 0.18 in; Use a soldering iron to fix your component; Close the PG5-R2; Plug-in in the terminal blocks jumper channels. 1 - Component installed in parallel with two circuits 164 ABB SNK series - Terminal blocks

167 Component plugs Common terminal block accessories 1SNK160022F " 17.67" PG5 5.2 mm in spacing " " PG5 component plugs Ease the components installation (components not supplied with plug) with our quick plug-in mounting system which avoids soldering process, Accept 8.8 x.2 mm 0.46 x in components such as resistors, diodes or subminiature fuses (fully encapsulated), Maximum dissipatived power: 1 W. Components in series with circuit Dark grey PG5 1SNK900401R Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service IEC C F min/max Storage C F Installing C F 5 Direct plug-in in disconnect with plug terminal block 1 - Component installed in series with circuit IEC UL - CSA Rated current Rated voltage 400 V 150 V Impulse withstand voltage 6000 V Protection IP20 NEMA 1 All the main technical data provided are "manufacturer" values. RoHS Blank card In polycarbonate White MC512 1SNK140000R In polyamide MC512PA 1SNK149999R Universal wire markers holder 5.2 mm in spacing Grey UMH 1SNK900611R SNK160120F " 17.67" PG5-R1 5.2 mm in spacing " " PG5-R1 disconnect plugs Allow disconnect function when associated with the disconnect with plug terminal blocks. Equipped with linking bar Orange PG5-R1 1SNK900402R Material specifications Insulating material Polyamide Flammability V0 NF F I2F Ambient temperature Service IEC C F min/max Storage C F Installing C F IEC UL - CSA Rated current 18 A 20 A Rated voltage 400 V 150 V Impulse withstand voltage 6000 V Protection IP20 NEMA 1 All the main technical data provided are "manufacturer" values. PG5-R1 totally inserted: closed circuit; PG5-R1 inserted in central position: open circuit, plug secured in isolated central position RoHS Blank card In polycarbonate White MC512 1SNK140000R In polyamide MC512PA 1SNK149999R Universal wire markers holder 5.2 mm in spacing Grey UMH 1SNK900611R SNK16007S Rev. C ABB SNK series - Terminal blocks 165

168 TO screwdrivers PS crimping tools Common terminal block accessories TO 1SNK160242F0014 Flat head screwdriver. screwdriver.5 x 50 mm 0.18 x 1.97 in TO SNK900640R screwdriver 4 x 100 mm x.94 in TO SNK900641R screwdriver 5.5 x 125 mm x 4.92 in TO SNK900642R screwdriver 6.5 x 150 mm x 5.90 in TO SNK90064R Insulated screwdriver.5 x 100 mm 0.18 x.94 in TO INS 1SNK900644R PS- 1SNK160127F0014 1SNK160028S Rev. B Crimp flexible conductors equipped with ferrules from 0.08 to 10 mm² 28 AWG to 7 AWG, Semi-automatic crimping tool. 180 mm 7.09 in length PS- 1SNK900650R ABB SNK series - Terminal blocks

169 End sections PI-Spring terminal block accessories EK2.5 1SNK1602V0014 EK2.5 end sections Unique dark grey color that fits all terminal blocks colours and ease the identification of circuits within your terminal block assemblies, Compatible with ZK2.5, ZK2.5-PE, ZK4, ZK4-PE, ZK6 and ZK6-PE PI-Spring terminal blocks. 2 mm in spacing Dark grey EK2.5 1SNK705910R EK2.5-P 1SNK16024V0014 EK2.5-P end sections Unique dark grey color that fits all terminal blocks colours and ease the identification of circuits within your terminal block assemblies, Compatible with ZK2.5-P, ZK2.5-PE-P, ZK4-P, ZK4-PE-P, ZK2.5-S..., ZK2.5-SP and ZK2.5-SF... PI-Spring terminal blocks. 2 mm in spacing Dark grey EK2.5-P 1SNK705911R EK2.5-4P 1SNK16025V0014 EK2.5-4P end sections Unique dark grey color that fits all terminal blocks colours and ease the identification of circuits within your terminal block assemblies, Compatible with ZK2.5-4P, ZK2.5-PE-4P, ZK4-4P and ZK4-PE-4P PI-Spring terminal blocks. 2 mm in spacing Dark grey EK2.5-4P 1SNK705912R Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service IEC C F min/max Storage C F Installing C F All the main technical data provided are "manufacturer" values. RoHS 1SNK160064S0201 ABB SNK series - Terminal blocks 167

170 End sections PI-Spring terminal block accessories 1SNK16027F0014 EK2.5-D2 end sections Compatible with ZK2.5-D2, ZK2.5-D2-PE, ZK2.5-D1 and ZK2.5-D1-PE PI-Spring terminal blocks. 2 mm in spacing Dark grey EK2.5-D2 1SNK705960R EK2.5-D2 5 EK6 1SNK16026F0014 EK6 end sections Compatible with ZK6-P and ZK6-PE-P PI-Spring terminal blocks. 2 mm in spacing Dark grey EK6-P 1SNK708911R EK10 1SNK16028F0014 1SNK160065S0201 EK10 end sections Compatible with ZK10, ZK10-PE, ZK16 and ZK16-PE PI-Spring terminal blocks. 2 mm in spacing Dark grey EK10 1SNK710910R Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service IEC C F min/max Storage C F Installing C F All the main technical data provided are "manufacturer" values. RoHS 168 ABB SNK series - Terminal blocks

171 Circuit separators PI-Spring terminal block accessories 1SNK160240V0014 CS-R2 circuit separators Ease the visual identification of the several circuits within your terminal block assemblies, Compatible with PI-spring feed-through and ground terminal blocks up to 8 mm spacing, Mounting on DIN-TH5 rail. mm in spacing Dark grey CS-R2 1SNK900106R CS-R " Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service IEC C F min/max Storage C F Installing C F " All the main technical data provided are "manufacturer" values. RoHS mm in spacing CS-R 1SNK160072S0201 1SNK160241V0014 CS-R circuit separators Ease the visual identification of the several circuits within your terminal block assemblies, Compatible with all simple deck PI-spring terminal blocks, Mounting on DIN-TH5 rail. mm in spacing Dark grey CS-R 1SNK900107R " " Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service IEC C F min/max Storage C F Installing C F mm in spacing All the main technical data provided are "manufacturer" values. RoHS ABB SNK series - Terminal blocks 169

172 Shield connectors PI-Spring terminal block accessories 1SNK160267F0014 SHBP/SHB shield connectors for PI-Spring terminal blocks Ensure the continuity of your shield connection, Various connection solutions available: RILS cable ties, soldering, quick-connect. 5 SHBP/SHB " SHB SHBP " " Compatible with ZK2.5 and ZK2.5-S terminal blocks SHBP 1SNK900601R Compatible with ZK double deck terminal blocks SHB 1SNK900602R Material specifications Insulating material Flammability NF F Ambient temperature Service IEC C F min/max Storage C F Installing C F SHBP IEC UL - CSA Ex e Rated voltage 100 V 50 V All the main technical data provided are "manufacturer" values. RoHS 1SNK160044S Rev. C " for screw clamp and PI-Spring terminal blocks Cable ties For SNK shield connector RILS 1SNK900627R SHBS is directly fixed on the terminal block, SHB is fixed on the ES4-D2 end section, SHBP is directly fixed on the terminal block, Connect the cable shielding on the shielding connector with: RILS cable ties, quick-connect (the shield connector needs to be prepared), soldering iron. 170 ABB SNK series - Terminal blocks

173 End sections Screw clamp terminal block accessories ES4 1SNK16101F0014 ES4 end sections Unique dark grey color that fits all terminal blocks colours and ease the identification of circuits within your terminal block assemblies, Compatible with feed-through, ground and disconnect screw clamp terminal blocks. 2.2 mm in spacing Dark grey ES4 1SNK505910R ES6-S 1SNK160229V0014 ES6-S end sections Compatible with ZS6-S and ZS6-S-PE terminal blocks. 2.2 mm in spacing Dark grey ES6-S 1SNK505912R ES6-4S 1SNK16020V0014 ES6-4S end sections Compatible with ZS6-4S, ZS6-4S-PE, ZS6-S-4S-T2 and ZS4-PE-R2 terminal blocks. 2.2 mm in spacing Dark grey ES6-4S 1SNK505911R ES4-D2 1SNK161012F0014 ES4-D2 end sections Unique dark grey color that fits all terminal blocks colours and ease the identification of circuits within your terminal block assemblies, Compatible with double deck screw clamp terminal blocks 2.55 mm in spacing Dark grey ES4-D2 1SNK505960R Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service IEC C F min/max Storage C F Installing C F All the main technical data provided are "manufacturer" values. RoHS 1SNK160061S0201 ABB SNK series - Terminal blocks 171

174 End sections Screw clamp terminal block accessories 1SNK16022V0014 ES4-T end sections Compatible with ZS4-T terminal block. 0.8 mm 0.01 in spacing Dark grey ES4-T 1SNK505961R ES4-T 5 ES4-SF 1SNK161026F0014 ES4-SF end sections Compatible with fuse ZS4-SF1... and disconnect screw clamp terminal blocks ZS4-S-R. 1.5 mm in spacing Dark grey ES4-SF 1SNK508960R SNK16021F0014 ES4-D2-SF1 end sections Compatible with ZS4-D2-SF1... terminal blocks. 2.5 mm in spacing Dark grey ES4-D2-SF1 1SNK508911R ES4-D2-SF1 ES10-ST 1SNK161072F0014 ES10-ST end sections Unique dark grey color that fits all test disconnect terminal blocks ZS10-ST... and ease the identification of circuits within your terminal block assemblies, Also compatible with ZS10-R1 and ZS10-PE-R1. 2 mm in spacing Dark grey ES10-ST 1SNK508910R Circuit separators 0 mm 0 in spacing Dark grey CS 1SNK900101R Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service IEC C F min/max Storage C F Installing C F All the main technical data provided are "manufacturer" values. RoHS Gost R 1SNK160062S ABB SNK series - Terminal blocks

175 JB8 screw jumper bars Screw clamp terminal block accessories JB8 8 mm 0.15 in spacing 1SNK160212F0014 JB8 jumper bars Insulated jumper bar with screw mounting. 8 mm 0.15 in spacing 2 poles Orange JB8-2-R1 1SNK908902R poles JB8--R1 1SNK90890R poles JB8-4-R1 1SNK908904R poles JB8-5-R1 1SNK908905R poles JB8-10-R1 1SNK908910R Material specifications Insulating material Polyamide Rail Flammability V0 NF F I2F Tool Flat screwdriver Ambient temperature Service IEC C F Ø.5 mm min/max Storage C F Ø 0.18 in Installing C F Torque 0.7 N.m ± lb.in ± IEC UL - CSA Ex e Rated current 50 A 51 A Rated voltage Standard use 160 V Alternated poles Impulse withstand voltage Protection IP20 NEMA 1 All the main technical data provided are "manufacturer" values. Not authorized RoHS 1 - Rated voltage: 160 V (IEC) / Not authorized (UL) 2 - Rated voltage: 20 V (IEC) / Not authorized (UL) - Rated voltage: 1000 V (IEC) / 00 V (UL) a - End section ES10-ST b - End stop BAZ1 1SNK161061S0201 ABB SNK series - Terminal blocks 17

176 Screw jumper bars Screw clamp terminal block accessories 1SNK160124F0014 JB16 16 mm 0.60 in spacing JB16 jumper bars Insulated jumper bar with screw mounting. 16 mm 0.60 in spacing 2 poles Orange JB16-2 1SNK91602R poles JB16-1SNK9160R poles JB16-4 1SNK91604R poles JB16-5 1SNK91605R poles JB SNK91610R Main Technical Data Material Specifications Insulating material Polyamide Rail Flammability V0 NF F I2F Tool Flat screwdriver Ambient temperature Service IEC C F Ø 5.5 mm min/max Storage C F Ø in Installing C F Torque 1.2 N.m ± lb.in ± With flat pliers, cut out the partitions on the terminal block insulating body. Be careful to not cut out the jumpered terminal blocks partitions at both ends of the assembly in order to maintain the IP20, Nema1 protection and insulation, Install the jumper bar with the recommended tool and torque. IEC UL - CSA Ex e Rated current 125 A Rated voltage Standard use 1000 V 600 V 60 V Alternated poles Impulse withstand voltage 8000 V Protection IP20 NEMA 1 All the main technical data provided are "manufacturer" values. Not authorized RoHS 1SNK160100F0014 JB22 jumper bars Screw jumper bars. JB22 22 mm in spacing 22 mm in spacing 2 poles JB22-2 1SNK92202R poles JB22-1SNK9220R poles JB22-5 1SNK92205R poles JB SNK92210R Main Technical Data Material Specifications Insulating material Rail Flammability NF F Tool Allen key Ambient temperature Service IEC C F Ø 4 mm min/max Storage C F Ø in Installing C F Torque 2 N.m ± lb.in ±.54 With flat pliers, cut out the partitions on the terminal block insulating body. Be careful to not cut out the jumpered terminal blocks partitions at both ends of the assembly in order to maintain the IP20, Nema1 protection and insulation, Install the jumper bar with the recommended tool and torque. IEC UL - CSA Ex e Rated current 192 A 175 A Rated voltage Standard use 1000 V 600 V 60 V Alternated poles Impulse withstand voltage 8000 V Protection NEMA 1 All the main technical data provided are "manufacturer" values. RoHS Not authorized 1SNK16002S Rev. B 174 ABB SNK series - Terminal blocks

177 Screw jumper bars Screw clamp terminal block accessories JB26 26 mm in spacing 1SNK160100F0014 JB26 jumper bars Screw jumper bars. 26 mm 1.02 in spacing 2 poles JB26-2 1SNK92602R poles JB26-1SNK9260R poles JB26-5 1SNK92605R poles JB SNK92610R Main Technical Data Material Specifications Insulating material Rail Flammability NF F Tool Allen key Ambient temperature Service IEC C F Ø 4 mm min/max Storage C F Ø in Installing C F Torque 2 N.m ± lb.in ±.54 5 With flat pliers, cut out the partitions on the terminal block insulating body. Be careful to not cut out the jumpered terminal blocks partitions at both ends of the assembly in order to maintain the IP20, Nema1 protection and insulation, Install the jumper bar with the recommended tool and torque. IEC UL - CSA Ex e Rated current 22 A 20 A Rated voltage Standard use 1000 V 600 V 60 V Alternated poles Impulse withstand voltage 8000 V Protection NEMA 1 All the main technical data provided are "manufacturer" values. Not authorized RoHS 1SNK16004S Rev. B ABB SNK series - Terminal blocks 175

178 PC8 lateral jumper bars Screw clamp terminal block accessories 5 PC8 8 mm 0.15 in spacing for ZS10-ST Rated voltage: 60 V (IEC) / 150 V (UL) 2 - Rated voltage: 60 V (IEC) / 00 V (UL) a - End section ES10-ST b - End stop BAZ1 b a 1SNC160112F0014 IP20 comb jumper bars: Direct insertion in the screw clamp before tigtening the screws, above the eventual conductor, Available in pre-cut poles for test disconnect terminal blocks applications. PC8 lateral jumper bars 8 mm 0.15 in spacing 2 poles Black PC8-2 1SNA11658R poles PC8-1SNA11659R poles PC8-4 1SNA116540R poles PC8-10 1SNA161R PC8 lateral jumper bars pre-cut poles 8 mm 0.15 in 4/6 poles Black PC8-R1 1SNA400711R spacing 4/8 poles PC8-R2 1SNA400712R /10 poles PC8-R 1SNA40071R /4 poles PC8-R4 1SNA400724R /7 poles PC8-R5 1SNA400842R / poles PC8-R6 1SNA40084R Material specifications Insulating material Polyamide Flammability V0 NF F I2F Ambient temperature Service IEC C F min/max Storage C F Installing C F All the main technical data provided are "manufacturer" values. RoHS 1SNK161060S ABB SNK series - Terminal blocks

179 Circuit separators Screw clamp terminal block accessories 1SNK160002F0014 CS 0 mm 0 in spacing CS circuit separators The CS circuit separator avoids the derating of terminal blocks when cut jumper bars JB are used, Compatible with feed-through terminal blocks up to 16 mm² 4 AWG, Without spacing loss. 0 mm 0 in spacing Dark grey CS 1SNK900101R Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service IEC C F min/max Storage C F Installing C F 5 All the main technical data provided are "manufacturer" values. RoHS CS-R " 1SNK16000F0014 CS-R1 circuit separators Ease the visual identification of the several circuits within your terminal block assemblies, Compatible with feed-through terminal blocks up to 5 mm² 0 AWG, Intermediate cover holder for CO protective cover, Mounting on DIN-TH5 rail. mm in spacing Dark grey CS-R1 1SNK90010R " " 5 1.8" mm in spacing Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service IEC C F min/max Storage C F Installing C F All the main technical data provided are "manufacturer" values. RoHS Blank card In polycarbonate White MC512 1SNK140000R In polyamide MC512PA 1SNK149999R Universal wire markers holder 5.2 mm in spacing Grey UMH 1SNK900611R SNK160018S Rev. C ABB SNK series - Terminal blocks 177

180 Shield connectors Screw clamp terminal block accessories SHBS/SHB 1SNK160149F0014 SHBS/SHB shield connectors Ensure the continuity of your shield connection, Various connection solutions available: RILS cable ties, soldering, quick-connect. Compatible with ZS feed-through terminal blocks SHBS 1SNK900600R Compatible with ZS double deck terminal blocks SHB 1SNK900602R " SHB SHBS " Material specifications Insulating material Flammability NF F Ambient temperature Service IEC C F min/max Storage C F Installing C F 94.70" SHBS IEC UL - CSA Ex e Rated voltage 20 V 125 V All the main technical data provided are "manufacturer" values. RoHS 1SNK160079S Rev. C " for screw clamp and PI-Spring screwless terminal blocks Cable ties For SNK shield connector RILS 1SNK900627R SHBS is directly fixed on the terminal block, SHB is fixed on the ES4-D2 end section, SHBP is directly fixed on the terminal block, Connect the cable shielding on the shielding connector with: RILS cable ties, quick-connect (the shield connector needs to be prepared), soldering iron. 178 ABB SNK series - Terminal blocks

181 PL protecting covers Screw clamp terminal block accessories PL 1SNK160096F0014 The mounting of the PL does not require a screwdriver. The dismounting of the PL requires a screwdriver DIA.4 mm in, the screwdriver must be positioned in the cover centered hole. Prohibit access to the screw clamps, Indicate live circuits. 5.2 mm in spacing Transparent PL5 1SNK900618R mm 0.26 in spacing PL6 1SNK900619R mm 0.15 in spacing PL8 1SNK900620R mm 0.94 in spacing PL10 1SNK900621R mm 0.60 in spacing PL16 1SNK900622R Material specifications Insulating material Polyamide Rail Flammability V2 NF F Tool Flat screwdriver Ambient temperature Service IEC C F Ø 4 mm min/max Storage C F Ø in Installing C F Torque All the main technical data provided are "manufacturer" values. RoHS 5 1SNK160021S Rev. B ABB SNK series - Terminal blocks 179

182 Protecting covers Screw clamp terminal block accessories CO 1SNK160110F0014 CO protecting covers Restrict access to your assembly with the protecting cover CO installed with KCO mounting kit (2 end stops, 2 sealing accessories), Compatible with SNK feed-through terminal blocks up to 5 mm² 0 AWG. 1 m 9.4 in length Transparent CO 1SNK900604R " " Material specifications Insulating material PVC Flammability V0 NF F Ambient temperature Service IEC C F min/max Storage C F Installing C F All the main technical data provided are "manufacturer" values. RoHS Protecting cover kits Mounting kit for cover CO Dark grey KCO 1SNK900624R Label White PAM4020 1SNA25106R Restrict access to the circuit by sealing the cover: Drill on the CO center line at 5 mm in from the extremity with 5 mm in diameter drill, Pass the sealing collar through the CO and KCO holes. KCO 1SNK160144F0014 KCO protecting cover kits Mount your protecting cover with the KCO versatile mounting kit (2 end stops, 2 sealing accessories): Maintain the cover, Reliably seal the access to the terminal assembly if needed, Use it as well as an end stop. Mounting kit for cover CO Dark grey KCO 1SNK900624R " " " " Material specifications Insulating material Polyamide Rail TH 5-7.5, Flammability V0 TH 5-15 NF F Tool Flat screwdriver Ambient temperature Service IEC C F Ø 4 mm min/max Storage C F Ø in Installing C F Torque All the main technical data provided are "manufacturer" values. RoHS 1SNK160045S Rev. B 180 ABB SNK series - Terminal blocks

183 Short circuit bridges Screw clamp terminal block accessories SC-JB8 8 mm 0.15 in spacing 1SNK160221F0014 SC-JB8 short circuit bridges Allow safe short-circuiting of Current Tranformers circuits, Insulated, Fully operated by screwdriver, Short circuited position secured thanks to AJS9 tightening, Adapted hook shape maintains the bridge on the terminal block in the non short-circuited position. 8 mm 0.15 in spacing 8 mm 0.15 in spacing 2 poles Yellow SC-JB8-2 1SNK900652R poles SC-JB8-1SNK90065R poles SC-JB8-4 1SNK900654R /5 poles SC-JB8-5 1SNK900655R poles Orange SC-JB8--OR 1SNK900657R poles SC-JB8-4-OR 1SNK900658R Material specifications Insulating material Polyamide Flammability V0 NF F I2F Ambient temperature Service IEC C F min/max Storage C F Installing C F All the main technical data provided are "manufacturer" values. RoHS 1SNK16106S0201 ABB SNK series - Terminal blocks 181

184 Test sockets Screw clamp terminal block accessories 5 AJS9 6.4 mm in spacing 1SNC160482F0014 AJS9 test sockets Insulated test sockets, Six colors available for circuit identification, Compatible with standard DIA 4 mm in test plugs: - insulated (according to IEC ) - not insulated (with mobile protection). For test plug DIA 4 mm in Yellow AJS9 1SNA179726R Black AJS9-BK 1SNA206680R Green AJS9-GN 1SNA206681R Grey AJS9-GR 1SNA206682R Blue AJS9-BL 1SNA20668R Red AJS9-RD 1SNA206720R White AJS9-WH 1SNA206765R Material specifications Insulating material Polyamide Rail Flammability V0 NF F I2F Tool Flat screwdriver Ambient temperature Service IEC C F Ø.5 mm min/max Storage C F Ø 0.18 in Installing C F Torque N.m.5-5. lb.in All the main technical data provided are "manufacturer" values. RoHS 1SNK161064S ABB SNK series - Terminal blocks

185 End sections Pluggable terminal block accessories EDK SNK16001V0014 EDK end sections Compatible with ZDK and ZDK4-22 pluggable terminal blocks. 2.2 mm in spacing Dark grey EDK SNK805910R " " Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service IEC C C min/max Storage C C Installing C C All the main technical data provided are "manufacturer" values. RoHS EDS4-22 1SNK16002V0014 EDS4-22 end sections 1SNK164010S0201 Compatible with ZDS4-22 pluggable terminal block. 0.8 mm 0.01 in spacing Dark grey EDS4-22 1SNK805911R " " Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service IEC C C min/max Storage C C Installing C C All the main technical data provided are "manufacturer" values. RoHS Technical data valid for copper conductors only. ABB SNK series - Terminal blocks 18

186 Coding pegs - Locking devices Pluggable terminal block accessories COP 1SNK164009S0201 1SNK160298V0014 COP coding pegs The coding pegs prevent plugs from being inserted into the wrong circuit. Dark grey COP-ZD 1SNK90066R Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature Service IEC C C min/max Storage C C Installing C C All the main technical data provided are "manufacturer" values. RoHS 1SNK16015V0014 VR 9.4 mm 0.70 in spacing VR locking devices Automatic locking provides excellent plug protection in case of accidental pulling, Lock safely one or two CDK or CDS plugs on ZDK and ZDS pluggable terminal blocks, Install one VR... up to 8 poles plugs assembly and two VR... up to 15 poles assembly, Organize and secure the wires with the locking version VR-ZD-R mm 0.70 in spacing Black VR-ZD 1SNK90067R VR-ZD-R1 1SNK90068R Material specifications Insulating material Polyacetal Flammability HB NF F Ambient temperature Service IEC C C min/max Storage C C Installing C C All the main technical data provided are "manufacturer" values. RoHS Technical data valid for copper conductors only. 184 ABB SNK series - Terminal blocks

187 5 PB-167 ABB SNK series - Terminal blocks 185

188 6 Summary_6 186 ABB SNK series - Terminal blocks

189 SNK series, marking solutions Selection guide 188 HTP500 thermal transfer printer 190 MG thermal transfer printer 192 AMS 500 and AMS 250 plotter 194 Terminal block markers 5.2 mm in spacing MC512, MG-CPM-1 Blank card in polycarbonate 196 MC512PA Blank card in polyamide 197 Pre-printed marker card for horizontal terminal block assembly 198 Pre-printed marker card for vertical terminal block assembly mm 0.26 in spacing MC612, MG-CPM-1 Blank card in polycarbonate 202 MC612PA Blank card in polyamide 20 Pre-printed marker card for horizontal terminal block assembly 204 Pre-printed marker card for vertical terminal block assembly mm 0.15 in spacing MC812, MC812PA Blank card 208 MC812PA Pre-printed marker card for horizontal terminal block assembly 209 Pre-printed marker card for vertical terminal block assembly 211 Markers UMH Universal wire markers holder 21 MG2-TDMO Clip-on blank wire marker 21 MCLH Label 214 Marking systems HTP500 Thermal transfer printer 215 MG Thermal transfer printer 216 AMS Plotter 217 Summary_6 ABB SNK series - Terminal blocks 187

190 Marking systems Selection guide For high volume terminal blocks applications 6 Marking systems Technology Printing mode Printing speed Printing quality HTP500-V2 Thermal transfer Manual / Auto (up to 64 cards) High 00 x 600 dpi 1 ribbon or ink cartridge printing capacity ~ , RC510 markers (5 x 10 mm markers) Printing color available (monochrome) Terminal block markers material Black / Red Polycarbonate Terminal block markers SNK series terminal blocks blank markers polyamide SNK series terminal blocks blank markers polycarbonate MC SNK series terminal blocks blank markers PVC End stop markers Other terminal blocks manufacturers blank markers Wires and cables markers Components and equipment markers 2 marker types manufacturers 2 marker types 4 marker types 188 ABB SNK series - Terminal blocks

191 For versatile applications For basic marking applications MG AMS 500 AMS 250 Thermal transfer Plotter 6 Manual Medium Manual Low 00 x 600 dpi 00 x 00 dpi ~ , MG-CPM (5 x 10 mm markers) ~ markers (with characters per markers) Black / Red / Blue / Green / White Polycarbonate Black Polyamide MC PA MG-CPM MG-CPMF 2 marker types 4 marker types 15 manufacturers 5 manufacturers 4 marker types 1 marker type 9 marker types 9 marker types 1SNC160226S0201 ABB SNK series - Terminal blocks 189

192 HTP500 thermal transfer printer The best solution to print high volume of terminal block markers 6 The fast and high resolution printing marking system Time saving The 64-card feeder enables a serial print run to be started without human intervention. The printing process is very fast, able to print up to 8500 markers per hour. 64 cards feeder Easy ribbon replacement Immediate use Thanks to the thermal transfer technology, there is no drying time. Once printed, you can directly install your markers on your electrical installation. Clean printing every time Before each print, the special cleaning ribbon automatically cleans the marking card thus ensuring the best print quality for your markers. You can also run automatic cleaning mode on the HTP500 from the digital screen. Special cleaning cassette easy to remove Digital screen interface Low maintenance The printing and feeding areas are easy to access allowing the ribbon to be changed in only a few seconds. The ribbon cartridge keeps your hands cleans while you are replacing it. 1SNC160208S Rev. A 190 ABB SNK series - Terminal blocks

193 The smart options you need HTP500 software The software for the HTP500 is compatible with all Windows fonts and lets you import images and data in various formats (.csv,.glv, etc.) so you can fully customize your printouts. Limited number of support plates With only support plates, the HTP500 simplifies your everyday printing tasks. Comprehensive digital screen interface Choose your language directly on the printer interface. 6 Technical features Resolution: 00 dpi Length: 418 mm Width: 25 mm Height: 210 mm Weight: 9.5 kg. Computer configuration required Microsoft Windows XP, Windows Vista or Windows 7* USB connection CD player or Internet connection. * Except Windows 7 64 bits. 1SNC160208S Rev. A ABB SNK series - Terminal blocks 191

194 MG thermal transfer printer The versatile, compact and robust marking system MARKINGenius MG is a high resolution printer based on thermal transfer technology for producing high quality identification and labelling for terminal blocks, cables and all equipment mounted in electrical panels. Compact, ergonomic, clean and quiet, MARKINGenius MG may be conveniently located in an office or workshop or easily transported in the field. 6 Thermal transfer technology uses heat to transfer characters or symbols onto a plastic marker through an ink ribbon. Besides the excellent printing quality, there is no drying time and the markers are instantly usable. With the MG thermal transfer printer, forget about drying times and clogged print head problems. Combined simplicity, performance and make savings Facilitate your printing process Compact design (82 x 20 x 20 mm) facilitates use in workshops or in the field. Easy to install and use: comprehensive quickstart kit. Intuitive software with easy data import and entry. Versatile: many different media available: plastic markers, stickers, labels etc. Save time and consumables Gain time with a short printing process: 12 seconds cycle. Carriage loading and unloading operation is fast and simple. Economic: up to markers with one ribbon. Partially printed marker card may be reused to avoid wastage. No drying time: printed markers are immediately ready to use. High quality printing Short printing cycle of 12 seconds Experience quality High Quality printing: 00 x 600 dpi for image or graphic printing. Robust: all moving parts are in metal. Economic: up to markers with one ribbon Many media types available for printing 1SNC160211S ABB SNK series - Terminal blocks

195 MG thermal transfer printer Components of the kit The MG printer is delivered with a comprehensive set of accessories for getting started quickly Kit (Order code: 1SNB419001R0000) including: 1 Thermal transfer printer 1 Software CD 1 Power supply cable 1 USB cable 1 Installation, operating, maintenance and user documentation 1 Protective cover 1 Ribbon take up spool 1 MG2-QTB support plate for terminal block markers (MG-CPM-01, 02, 0, 04, 07) 1 MG2-PWC support plate for wire and cable markers (MG-TPM) 1 MG2-PLT support plate for wire and cable markers (MG-TPMF) and various labels and signs 1 MG2-ETB Support plate for SNK series terminal block markers (MG-CPM-1) 1 MG2-ETR Black printing ribbon. 6 Genius Pro software The Genius Pro software application benefits from long experience in the field and requires the operator to have only basic skills in order to use it. It is application-oriented and provides fast and easy data entry including a dynamic full-size media preview giving an accurate representation of the current job. Features / characteristics: More than ten types of counter such as *.txt, *.cad, *.dbf, *.xls can be imported AutoCAD, Elcad, Spac and Excel import MATRIX, ACS and Simplo conversion Optimised printing of media for cables, terminal blocks, control gear, connectors, push buttons, components, panels and self-adhesive labels Specially developed proprietary Genius font and also Windows fonts Designs customised media Vector, drawing and clip art printing Free upgrades for each new release Microsoft Windows XP, Windows Vista, Windows 2000 SP4, Windows 7. 1SNC160211S0201 ABB SNK series - Terminal blocks 19

196 AMS 500 and AMS 250 plotter The universal standard for printing jobs AMS 500 Universal printing plotter Compatible with all original manufacturer terminal block markers (polyamide), it can also print other identification supports such as: wire and cable markers, push buttons, panels This plotter offers a large working area, hosting up to 4 different support plates for one plot job. Error detection mode The A panel automatically recognises the support plate and avoids the need to select marking elements, it also warns the user when the support is wrongly installed. 6 Dry out protection system Pens are prevented from drying out thanks to AMS 500 integrated pen station. AMS 250 Compact This A4 plotter is smaller than AMS 500 and is more suited to a cluttered environment. 1SNC160215S ABB SNK series - Terminal blocks

197 Automatic installation The installation program starts automatically. The computer just needs to be rebooted after it has finished and printing can start. What you see is what you get! 1SNC160215S0201 Microsoft, Windows, Excel are trademarks of Microsoft Corporation. 6 User friendly Microsoft Windows software Time saving: data import function from CAD, TXT and Excel files New special ink disposable plotter pens ED-R Disposable pens ED-R almost never clog, they are ideal for use in particularly dry environments. These pens are filled with the permanent ink ED, most suitable for marking various plastic surfaces. The ED ink should only be used on plastic material. Do not clean or touch with aggressive fluids. For applications outside of the control panel the ink P 2.0 is more suitable and durable. ABB SNK series - Terminal blocks 195

198 Terminal block markers Blank card in polycarbonate mm in spacing MC512 MC512 terminal block markers MC512 marker card in polycarbonate for high marking quality, durability and speed when marked with the HTP500 printer, Excellent marking durability in the most severe environments, Improved marking visibility thanks to the increased marking surface +20% (12 mm in). Material Flammability Maximum printed digits Dimensions mm inches Polycarbonate V0 Horizontal Vertical x x HTP500-V2 KIT Number of markers per card Color Type Order code Pkg Weight card (1 pce) g Blank card 45 White MC512 1SNK140000R Yellow MC512-YL 1SNK140004R Marking systems Type Order code Pkg Weight Thermal transfer printer HTP500-V2 KIT 1SNA25700R Marking systems accessories Type Order code Pkg Weight Marking support plate for MC and RCTT marker cards (HTP500) HTP500-PL2 1SNA25705R MG-CPM-1 terminal block markers MG-CPM and markers are used for marking 5.2 mm in spacing SNK terminal blocks, Provide an elevate mechanical robustness, high dimensional stability and are halogen free, Single application on terminal block, 5 cards per packing MG-CPM-1 Material Flammability Maximum printed digits Dimensions mm inches Polycarbonate V2 Horizontal Vertical x x Number of markers per card Color Type Order code Pkg Weight marker (1 pce) g Blank card 56 White MG-CPM SNB041790R Yellow MG-CPM SNB041740R MG KIT Marking systems Type Order code Pkg Weight Thermal transfer printer MG KIT 1SNB419001R Marking systems accessories Type Order code Pkg Weight Support plate for MG-CPM-1 MG2-ETB SNB991016R SNK16000S Rev. A 196 ABB SNK series - Terminal blocks

199 Terminal block markers Blank card in polyamide mm in spacing MC512PA MC512PA terminal block markers MC512PA marker card in polyamide to be marked on AMS 500 marking table for medium scale volumes and standard industrial applications, Terminal blocks are directly independent after strip mounting, Improved marking visibility thanks to the increased marking surface +20% (12 mm in). AMS 500 Material Flammability Maximum printed digits Dimensions mm inches Polyamide V2 Horizontal Vertical x x Number of markers Color Type Order code Pkg Weight per card card (1 pce) g Blank card 100 White MC512PA 1SNK149999R Marking systems Type Order code Pkg Weight AMS plotter KIT MAO AMS 500 1SNA60000R Marking systems accessories Type Order code Pkg Weight Marking support plate for MC PA marker cards ( MC PA marker cards per plate) SPRC 0-1SNA6009R ABB SNK series - Terminal blocks 197 1SNK160076S0201

200 MC512PA terminal block markers Pre-printed marker card for horizontal terminal block assembly Save printing time with our large pre-printed cards offer with pre-printed numbers, letters or symbols. 6 MC512PA 5.2 mm in spacing Material Flammability Dimensions mm inches Polyamide V2 4.8 x x Number of markers per card Color Type Order code Pkg Weight card (1 pce) g 0->9 (x10) 100 White MC512PA 1SNK140091R >10 (x10) 100 White MC512PA 1SNK140011R >20 (x10) 100 White MC512PA 1SNK140021R >0 (x10) 100 White MC512PA 1SNK14001R >40 (x10) 100 White MC512PA 1SNK140041R >50 (x10) 100 White MC512PA 1SNK140051R >60 (x10) 100 White MC512PA 1SNK140061R >70 (x10) 100 White MC512PA 1SNK140071R >80 (x10) 100 White MC512PA 1SNK140081R >90 (x10) 100 White MC512PA 1SNK14008R >100 (x10) 100 White MC512PA 1SNK140101R >110 (x10) 100 White MC512PA 1SNK140111R >120 (x10) 100 White MC512PA 1SNK140121R >10 (x10) 100 White MC512PA 1SNK14011R >140 (x10) 100 White MC512PA 1SNK140141R >150 (x10) 100 White MC512PA 1SNK140151R >160 (x10) 100 White MC512PA 1SNK140161R >170 (x10) 100 White MC512PA 1SNK140171R >180 (x10) 100 White MC512PA 1SNK140181R >190 (x10) 100 White MC512PA 1SNK140191R >200 (x10) 100 White MC512PA 1SNK140201R > White MC512PA 1SNK145011R > White MC512PA 1SNK145021R > White MC512PA 1SNK14501R > White MC512PA 1SNK145041R > White MC512PA 1SNK145051R > White MC512PA 1SNK145061R > White MC512PA 1SNK145071R > White MC512PA 1SNK145081R > White MC512PA 1SNK145091R A (x100) 100 White MC512PA 1SNK146011R B (x100) 100 White MC512PA 1SNK146021R C (x100) 100 White MC512PA 1SNK14601R D (x100) 100 White MC512PA 1SNK146041R E (x100) 100 White MC512PA 1SNK146051R F (x100) 100 White MC512PA 1SNK146061R G (x100) 100 White MC512PA 1SNK146071R H (x100) 100 White MC512PA 1SNK146081R I (x100) 100 White MC512PA 1SNK146091R J (x100) 100 White MC512PA 1SNK146101R K (x100) 100 White MC512PA 1SNK146111R L (x100) 100 White MC512PA 1SNK146121R M (x100) 100 White MC512PA 1SNK14611R N (x100) 100 White MC512PA 1SNK146141R O (x100) 100 White MC512PA 1SNK146151R P (x100) 100 White MC512PA 1SNK146161R Q (x100) 100 White MC512PA 1SNK146171R R (x100) 100 White MC512PA 1SNK146181R S (x100) 100 White MC512PA 1SNK146191R T (x100) 100 White MC512PA 1SNK146201R U (x100) 100 White MC512PA 1SNK146211R V (x100) 100 White MC512PA 1SNK146221R W (x100) 100 White MC512PA 1SNK14621R X (x100) 100 White MC512PA 1SNK146241R Y (x100) 100 White MC512PA 1SNK146251R Continue on next page 1SNK160004S Rev. A 198 ABB SNK series - Terminal blocks

201 MC512PA terminal block markers Pre-printed marker card for horizontal terminal block assembly MC512PA 5.2 mm in spacing Number of markers per card Color Type Order code Pkg Weight card (1 pce) g Continuation of previous page Z (x100) 100 White MC512PA 1SNK146261R (x100) 100 White MC512PA 1SNK147001R (x100) 100 White MC512PA 1SNK147011R (x100) 100 White MC512PA 1SNK147021R (x100) 100 White MC512PA 1SNK14701R (x100) 100 White MC512PA 1SNK147041R (x100) 100 White MC512PA 1SNK147051R (x100) 100 White MC512PA 1SNK147061R (x100) 100 White MC512PA 1SNK147071R (x100) 100 White MC512PA 1SNK147081R (x100) 100 White MC512PA 1SNK147091R (x100) 100 White MC512PA 1SNK148001R (x100) 100 White MC512PA 1SNK148011R ~ (x100) 100 White MC512PA 1SNK148021R = (x100) 100 White MC512PA 1SNK14801R (x100) 100 White MC512PA 1SNK148041R L1 (x100) 100 White MC512PA 1SNK148051R L2 (x100) 100 White MC512PA 1SNK148061R L (x100) 100 White MC512PA 1SNK148071R PE (x100) 100 White MC512PA 1SNK148091R U1 (x100) 100 White MC512PA 1SNK148101R U2 (x100) 100 White MC512PA 1SNK148111R U (x100) 100 White MC512PA 1SNK148121R V1 (x100) 100 White MC512PA 1SNK14811R V2 (x100) 100 White MC512PA 1SNK148141R V (x100) 100 White MC512PA 1SNK148151R W1 (x100) 100 White MC512PA 1SNK148161R W2 (x100) 100 White MC512PA 1SNK148171R W (x100) 100 White MC512PA 1SNK148181R L1-L2-L-N-PE (x20) 100 White MC512PA 1SNK149001R U1-U2-U-V1-V2-V-W1- W2-W (x10) + U1 (x10) 100 White MC512PA 1SNK149011R SNK160004S Rev. A ABB SNK series - Terminal blocks 199

202 MC512PA terminal block markers Pre-printed marker card for vertical terminal block assembly Save printing time with our large pre-printed cards offer with pre-printed numbers, letters or symbols. 6 MC512PA 5.2 mm in spacing Material Flammability Dimensions mm inches Polyamide V2 4.8 x x Number of Color Type Order code Pkg Weight markers per card card (1 pce) g 0->9 (x10) 100 White MC512PA 1SNK140092R >10 (x10) 100 White MC512PA 1SNK140012R >20 (x10) 100 White MC512PA 1SNK140022R >0 (x10) 100 White MC512PA 1SNK14002R >40 (x10) 100 White MC512PA 1SNK140042R >50 (x10) 100 White MC512PA 1SNK140052R >60 (x10) 100 White MC512PA 1SNK140062R >70 (x10) 100 White MC512PA 1SNK140072R >80 (x10) 100 White MC512PA 1SNK140082R >90 (x10) 100 White MC512PA 1SNK140084R >100 (x10) 100 White MC512PA 1SNK140102R >110 (x10) 100 White MC512PA 1SNK140112R >120 (x10) 100 White MC512PA 1SNK140122R >10 (x10) 100 White MC512PA 1SNK14012R >140 (x10) 100 White MC512PA 1SNK140142R >150 (x10) 100 White MC512PA 1SNK140152R >160 (x10) 100 White MC512PA 1SNK140162R >170 (x10) 100 White MC512PA 1SNK140172R >180 (x10) 100 White MC512PA 1SNK140182R >190 (x10) 100 White MC512PA 1SNK140192R >200 (x10) 100 White MC512PA 1SNK140202R > White MC512PA 1SNK145012R > White MC512PA 1SNK145022R > White MC512PA 1SNK14502R > White MC512PA 1SNK145042R > White MC512PA 1SNK145052R > White MC512PA 1SNK145062R > White MC512PA 1SNK145072R > White MC512PA 1SNK145082R > White MC512PA 1SNK145092R > White MC512PA 1SNK145102R A (x100) 100 White MC512PA 1SNK146012R B (x100) 100 White MC512PA 1SNK146022R C (x100) 100 White MC512PA 1SNK14602R D (x100) 100 White MC512PA 1SNK146042R E (x100) 100 White MC512PA 1SNK146052R F (x100) 100 White MC512PA 1SNK146062R G (x100) 100 White MC512PA 1SNK146072R H (x100) 100 White MC512PA 1SNK146082R I (x100) 100 White MC512PA 1SNK146092R J (x100) 100 White MC512PA 1SNK146102R K (x100) 100 White MC512PA 1SNK146112R L (x100) 100 White MC512PA 1SNK146122R M (x100) 100 White MC512PA 1SNK14612R N (x100) 100 White MC512PA 1SNK146142R O (x100) 100 White MC512PA 1SNK146152R P (x100) 100 White MC512PA 1SNK146162R Q (x100) 100 White MC512PA 1SNK146172R R (x100) 100 White MC512PA 1SNK146182R S (x100) 100 White MC512PA 1SNK146192R T (x100) 100 White MC512PA 1SNK146202R U (x100) 100 White MC512PA 1SNK146212R V (x100) 100 White MC512PA 1SNK146222R Continue on next page 1SNK160005S Rev. A 200 ABB SNK series - Terminal blocks

203 MC512PA terminal block markers Pre-printed marker card for vertical terminal block assembly MC512PA 5.2 mm in spacing Number of markers per card Color Type Order code Pkg Weight card (1 pce) g Continuation of previous page W (x100) 100 White MC512PA 1SNK14622R X (x100) 100 White MC512PA 1SNK146242R Y (x100) 100 White MC512PA 1SNK146252R Z (x100) 100 White MC512PA 1SNK146262R (x100) 100 White MC512PA 1SNK147002R (x100) 100 White MC512PA 1SNK147012R (x100) 100 White MC512PA 1SNK147022R (x100) 100 White MC512PA 1SNK14702R (x100) 100 White MC512PA 1SNK147042R (x100) 100 White MC512PA 1SNK147052R (x100) 100 White MC512PA 1SNK147062R (x100) 100 White MC512PA 1SNK147072R (x100) 100 White MC512PA 1SNK147082R (x100) 100 White MC512PA 1SNK147092R (x100) 100 White MC512PA 1SNK148002R (x100) 100 White MC512PA 1SNK148012R ~ (x100) 100 White MC512PA 1SNK148022R = (x100) 100 White MC512PA 1SNK14802R (x100) 100 White MC512PA 1SNK148042R L1 (x100) 100 White MC512PA 1SNK148052R L2 (x100) 100 White MC512PA 1SNK148062R L (x100) 100 White MC512PA 1SNK148072R PE (x100) 100 White MC512PA 1SNK148092R U1 (x100) 100 White MC512PA 1SNK148102R U2 (x100) 100 White MC512PA 1SNK148112R U (x100) 100 White MC512PA 1SNK148122R V1 (x100) 100 White MC512PA 1SNK14812R V2 (x100) 100 White MC512PA 1SNK148142R V (x100) 100 White MC512PA 1SNK148152R W1 (x100) 100 White MC512PA 1SNK148162R W2 (x100) 100 White MC512PA 1SNK148172R W (x100) 100 White MC512PA 1SNK148182R V (x100) 100 White MC512PA 1SNK148192R V (x100) 100 White MC512PA 1SNK148202R V (x100) 100 White MC512PA 1SNK148212R V (x100) 100 White MC512PA 1SNK148222R L1-L2-L-N-PE (x20) 100 White MC512PA 1SNK149002R U1-U2-U-V1-V2-V-W1- W2-W (x10) + U1 (x10) 100 White MC512PA 1SNK149012R SNK160005S Rev. A ABB SNK series - Terminal blocks 201

204 Terminal block markers Blank card in polycarbonate - 6 mm 0.26 in spacing MC612 MC612 terminal block markers MC612 marker card in polycarbonate for high marking quality, durability and speed when marked with the HTP500 printer, Excellent marking durability in the most severe environments, Improved marking visibility thanks to the increased marking surface +20% (12 mm in). Material Flammability Maximum printed digits Dimensions mm inches Polycarbonate V0 Horizontal Vertical x x HTP500-V2 KIT Number of markers Color Type Order code Pkg Weight per card card (1 pce) g Blank card 9 White MC612 1SNK150000R Yellow MC612-YL 1SNK150004R Marking systems Type Order code Pkg Weight Thermal transfer printer HTP500-V2 KIT 1SNA25700R Marking systems accessories Type Order code Pkg Weight Marking support plate for MC and RCTT marker cards (HTP500) HTP500-PL2 1SNA25705R MG-CPM-1 terminal block markers MG-CPM and markers are used for marking 6 mm 0.26 in spacing SNK terminal blocks, Provide an elevate mechanical robustness, high dimensional stability and are halogen free, Single application on terminal block, 5 cards per packing. MG-CPM-1 Material Flammability Maximum printed digits Dimensions mm inches Polycarbonate V0 Horizontal Vertical x x Number of markers Color Type Order code Pkg Weight per card marker (1 pce) g Blank card 48 White MG-CPM SNB041791R Yellow MG-CPM SNB041741R MG KIT Marking systems Type Order code Pkg Weight Thermal transfer printer MG KIT 1SNB419001R Marking systems accessories Type Order code Pkg Weight Support plate for MG-CPM-1 MG2-ETB SNB991016R SNK160006S Rev. A 202 ABB SNK series - Terminal blocks

205 Terminal block markers Blank card in polyamide - 6 mm 0.26 in spacing MC612 MC612PA terminal block markers MC612PA marker card in polyamide to be marked on AMS 500 marking table for medium scale volumes and standard industrial applications, Terminal blocks are directly independent after strip mounting, Improved marking visibility thanks to the increased marking surface +20% (12 mm in). AMS 500 Material Flammability Maximum printed digits Dimensions mm inches Polyamide V2 Horizontal Vertical x x Number of markers Color Type Order code Pkg Weight per card card (1 pce) g Blank card 100 White MC612PA 1SNK159999R Marking systems Type Order code Pkg Weight AMS plotter KIT MAO AMS 500 1SNA60000R Marking systems accessories Type Order code Pkg Weight Marking support plate for MC PA marker cards ( MC PA marker cards per plate) SPRC 0-1SNA6009R SNK160077S0201 ABB SNK series - Terminal blocks 20

206 MC612PA terminal block markers Pre-printed marker card for horizontal terminal block assembly Save printing time with our large pre-printed cards offer with pre-printed numbers, letters or symbols. 6 MC612PA 6 mm 0.26 in spacing Material Flammability Dimensions mm inches Polyamide V2 5.6 x x Number of markers per card Color Type Order code Pkg Weight card (1 pce) g 0->9 (x10) 100 White MC612PA 1SNK150091R >10 (x10) 100 White MC612PA 1SNK150011R >20 (x10) 100 White MC612PA 1SNK150021R >0 (x10) 100 White MC612PA 1SNK15001R >40 (x10) 100 White MC612PA 1SNK150041R >50 (x10) 100 White MC612PA 1SNK150051R >60 (x10) 100 White MC612PA 1SNK150061R >70 (x10) 100 White MC612PA 1SNK150071R >80 (x10) 100 White MC612PA 1SNK150081R >90 (x10) 100 White MC612PA 1SNK15008R >100 (x10) 100 White MC612PA 1SNK150101R >110 (x10) 100 White MC612PA 1SNK150111R >120 (x10) 100 White MC612PA 1SNK150121R >10 (x10) 100 White MC612PA 1SNK15011R >140 (x10) 100 White MC612PA 1SNK150141R >150 (x10) 100 White MC612PA 1SNK150151R >160 (x10) 100 White MC612PA 1SNK150161R >170 (x10) 100 White MC612PA 1SNK150171R >180 (x10) 100 White MC612PA 1SNK150181R >190 (x10) 100 White MC612PA 1SNK150191R >200 (x10) 100 White MC612PA 1SNK150201R > White MC612PA 1SNK155011R > White MC612PA 1SNK155021R > White MC612PA 1SNK15501R > White MC612PA 1SNK155041R > White MC612PA 1SNK155051R > White MC612PA 1SNK155061R > White MC612PA 1SNK155071R > White MC612PA 1SNK155081R > White MC612PA 1SNK155091R A (x100) 100 White MC612PA 1SNK156011R B (x100) 100 White MC612PA 1SNK156021R C (x100) 100 White MC612PA 1SNK15601R D (x100) 100 White MC612PA 1SNK156041R E (x100) 100 White MC612PA 1SNK156051R F (x100) 100 White MC612PA 1SNK156061R G (x100) 100 White MC612PA 1SNK156071R H (x100) 100 White MC612PA 1SNK156081R I (x100) 100 White MC612PA 1SNK156091R J (x100) 100 White MC612PA 1SNK156101R K (x100) 100 White MC612PA 1SNK156111R L (x100) 100 White MC612PA 1SNK156121R M (x100) 100 White MC612PA 1SNK15611R N (x100) 100 White MC612PA 1SNK156141R O (x100) 100 White MC612PA 1SNK156151R P (x100) 100 White MC612PA 1SNK156161R Q (x100) 100 White MC612PA 1SNK156171R R (x100) 100 White MC612PA 1SNK156181R S (x100) 100 White MC612PA 1SNK156191R T (x100) 100 White MC612PA 1SNK156201R U (x100) 100 White MC612PA 1SNK156211R V (x100) 100 White MC612PA 1SNK156221R W (x100) 100 White MC612PA 1SNK15621R Continue on next page 1SNK160007S Rev. A 204 ABB SNK series - Terminal blocks

207 MC612PA terminal block markers Pre-printed marker card for horizontal terminal block assembly MC612PA 6 mm 0.26 in spacing Number of markers per card Color Type Order code Pkg Weight card (1 pce) g Continuation of previous page X (x100) 100 White MC612PA 1SNK156241R Y (x100) 100 White MC612PA 1SNK156251R Z (x100) 100 White MC612PA 1SNK156261R (x100) 100 White MC612PA 1SNK157001R (x100) 100 White MC612PA 1SNK157011R (x100) 100 White MC612PA 1SNK157021R (x100) 100 White MC612PA 1SNK15701R (x100) 100 White MC612PA 1SNK157041R (x100) 100 White MC612PA 1SNK157051R (x100) 100 White MC612PA 1SNK157061R (x100) 100 White MC612PA 1SNK157071R (x100) 100 White MC612PA 1SNK157081R (x100) 100 White MC612PA 1SNK157091R (x100) 100 White MC612PA 1SNK158001R (x100) 100 White MC612PA 1SNK158011R ~ (x100) 100 White MC612PA 1SNK158021R = (x100) 100 White MC612PA 1SNK15801R Ground (x100) 100 White MC612PA 1SNK158041R L1 (x100) 100 White MC612PA 1SNK158051R L2 (x100) 100 White MC612PA 1SNK158061R L (x100) 100 White MC612PA 1SNK158071R PE (x100) 100 White MC612PA 1SNK158091R U1 (x100) 100 White MC612PA 1SNK158101R U2 (x100) 100 White MC612PA 1SNK158111R U (x100) 100 White MC612PA 1SNK158121R V1 (x100) 100 White MC612PA 1SNK15811R V2 (x100) 100 White MC612PA 1SNK158141R V (x100) 100 White MC612PA 1SNK158151R W1 (x100) 100 White MC612PA 1SNK158161R W2 (x100) 100 White MC612PA 1SNK158171R W (x100) 100 White MC612PA 1SNK158181R L1-L2-L-N-PE (x20) 100 White MC612PA 1SNK159001R U1-U2-U-V1-V2-V-W1- W2-W (x10) + U1 (x10) 100 White MC612PA 1SNK159011R SNK160007S Rev. A ABB SNK series - Terminal blocks 205

208 MC612PA terminal block markers Pre-printed marker card for vertical terminal block assembly Save printing time with our large pre-printed cards offer with pre-printed numbers, letters or symbols. 6 MC612PA 6 mm 0.26 in spacing Material Flammability Dimensions mm inches Polyamide V2 5.6 x x Number of markers per card Color Type Order code Pkg Weight card (1 pce) g 0->9 (x10) 100 White MC612PA 1SNK150092R >10 (x10) 100 White MC612PA 1SNK150012R >20 (x10) 100 White MC612PA 1SNK150022R >0 (x10) 100 White MC612PA 1SNK15002R >40 (x10) 100 White MC612PA 1SNK150042R >50 (x10) 100 White MC612PA 1SNK150052R >60 (x10) 100 White MC612PA 1SNK150062R >70 (x10) 100 White MC612PA 1SNK150072R >80 (x10) 100 White MC612PA 1SNK150082R >90 (x10) 100 White MC612PA 1SNK150084R >100 (x10) 100 White MC612PA 1SNK150102R >110 (x10) 100 White MC612PA 1SNK150112R >120 (x10) 100 White MC612PA 1SNK150122R >10 (x10) 100 White MC612PA 1SNK15012R >140 (x10) 100 White MC612PA 1SNK150142R >150 (x10) 100 White MC612PA 1SNK150152R >160 (x10) 100 White MC612PA 1SNK150162R >170 (x10) 100 White MC612PA 1SNK150172R >180 (x10) 100 White MC612PA 1SNK150182R >190 (x10) 100 White MC612PA 1SNK150192R >200 (x10) 100 White MC612PA 1SNK150202R > White MC612PA 1SNK155012R > White MC612PA 1SNK155022R > White MC612PA 1SNK15502R > White MC612PA 1SNK155042R > White MC612PA 1SNK155052R > White MC612PA 1SNK155062R > White MC612PA 1SNK155072R > White MC612PA 1SNK155082R > White MC612PA 1SNK155092R > White MC612PA 1SNK155102R A (x100) 100 White MC612PA 1SNK156012R B (x100) 100 White MC612PA 1SNK156022R C (x100) 100 White MC612PA 1SNK15602R D (x100) 100 White MC612PA 1SNK156042R E (x100) 100 White MC612PA 1SNK156052R F (x100) 100 White MC612PA 1SNK156062R G (x100) 100 White MC612PA 1SNK156072R H (x100) 100 White MC612PA 1SNK156082R I (x100) 100 White MC612PA 1SNK156092R J (x100) 100 White MC612PA 1SNK156102R K (x100) 100 White MC612PA 1SNK156112R L (x100) 100 White MC612PA 1SNK156122R M (x100) 100 White MC612PA 1SNK15612R N (x100) 100 White MC612PA 1SNK156142R O (x100) 100 White MC612PA 1SNK156152R P (x100) 100 White MC612PA 1SNK156162R Q (x100) 100 White MC612PA 1SNK156172R R (x100) 100 White MC612PA 1SNK156182R S (x100) 100 White MC612PA 1SNK156192R T (x100) 100 White MC612PA 1SNK156202R U (x100) 100 White MC612PA 1SNK156212R V (x100) 100 White MC612PA 1SNK156222R W (x100) 100 White MC612PA 1SNK15622R X (x100) 100 White MC612PA 1SNK156242R Continue on next page 1SNK160008S Rev. A 206 ABB SNK series - Terminal blocks

209 MC612PA terminal block markers Pre-printed marker card for vertical terminal block assembly MC612PA 6 mm 0.26 in spacing Number of markers per card Color Type Order code Pkg Weight card (1 pce) g Continuation of previous page Y (x100) 100 White MC612PA 1SNK156252R Z (x100) 100 White MC612PA 1SNK156262R (x100) 100 White MC612PA 1SNK157002R (x100) 100 White MC612PA 1SNK157012R (x100) 100 White MC612PA 1SNK157022R (x100) 100 White MC612PA 1SNK15702R (x100) 100 White MC612PA 1SNK157042R (x100) 100 White MC612PA 1SNK157052R (x100) 100 White MC612PA 1SNK157062R (x100) 100 White MC612PA 1SNK157072R (x100) 100 White MC612PA 1SNK157082R (x100) 100 White MC612PA 1SNK157092R (x100) 100 White MC612PA 1SNK158002R (x100) 100 White MC612PA 1SNK158012R ~ (x100) 100 White MC612PA 1SNK158022R = (x100) 100 White MC612PA 1SNK15802R (x100) 100 White MC612PA 1SNK158042R L1 (x100) 100 White MC612PA 1SNK158052R L2 (x100) 100 White MC612PA 1SNK158062R L (x100) 100 White MC612PA 1SNK158072R PE (x100) 100 White MC612PA 1SNK158092R U1 (x100) 100 White MC612PA 1SNK158102R U2 (x100) 100 White MC612PA 1SNK158112R U (x100) 100 White MC612PA 1SNK158122R V1 (x100) 100 White MC612PA 1SNK15812R V2 (x100) 100 White MC612PA 1SNK158142R V (x100) 100 White MC612PA 1SNK158152R W1 (x100) 100 White MC612PA 1SNK158162R W2 (x100) 100 White MC612PA 1SNK158172R W (x100) 100 White MC612PA 1SNK158182R V (x100) 100 White MC612PA 1SNK158192R V (x100) 100 White MC612PA 1SNK158202R V (x100) 100 White MC612PA 1SNK158212R V (x100) 100 White MC612PA 1SNK158222R L1-L2-L-N-PE (x20) 100 White MC612PA 1SNK159002R U1-U2-U-V1-V2-V-W1- W2-W (x10) + U1 (x10) 100 White MC612PA 1SNK159012R SNK160008S Rev. A ABB SNK series - Terminal blocks 207

210 MC812 terminal block markers Blank card in polycarbonate or polyamide - 8 mm 0.15 in spacing MC812 MC812 terminal block markers MC812 marker card in polycarbonate for high marking quality, durability and speed when marked with the HTP500 printer, Excellent marking durability in the most severe environments, Improved marking visibility thanks to the increased marking surface +20% (12 mm in) Material Flammability Maximum printed digits Dimensions mm inches Polycarbonate V0 Horizontal 4 Vertical x x HTP500-V2 KIT Number of markers Color Type Order code Pkg Weight per card card (1 pce) g Blank card 0 White MC812 1SNK160000R Yellow MC812-YL 1SNK160004R Marking systems Type Order code Pkg Weight Thermal transfer printer HTP500-V2 KIT 1SNA25700R Marking systems accessories Type Order code Pkg Weight Marking support plate for MC and RCTT marker cards (HTP500) HTP500-PL2 1SNA25705R MC812PA MC812PA terminal block markers MC812PA marker card in polyamide to be marked on AMS 500 marking table for medium scale volumes and standard industrial applications, Terminal blocks are directly independent after strip mounting, Improved marking visibility thanks to the increased marking surface +20% (12 mm in) Material Flammability Maximum printed digits Dimensions mm inches Polyamide V2 Horizontal Vertical x x Number of markers Color Type Order code Pkg Weight per card card (1 pce) g Blank card 100 White MC812PA 1SNK169999R AMS 500 Marking systems Type Order code Pkg Weight AMS plotter KIT MAO AMS 500 1SNA60000R ABB SNK series - Terminal blocks Marking systems accessories Type Order code Pkg Weight Marking support plate for MC PA marker cards ( MC PA marker cards per plate) SPRC 0-1SNA6009R SNK160009S Rev. A

211 MC812PA terminal block markers Pre-printed marker card for horizontal terminal block assembly Save printing time with our large pre-printed cards offer with pre-printed numbers, letters or symbols. MC812PA 8 mm 0.15 in spacing Material Flammability Dimensions mm inches Polyamide V2 7.6 x x Number of Color Type Order code Pkg Weight markers per card card (1 pce) g 0->9 (x10) 100 White MC812PA 1SNK160091R >10 (x10) 100 White MC812PA 1SNK160011R >20 (x10) 100 White MC812PA 1SNK160021R >0 (x10) 100 White MC812PA 1SNK16001R >40 (x10) 100 White MC812PA 1SNK160041R >50 (x10) 100 White MC812PA 1SNK160051R >60 (x10) 100 White MC812PA 1SNK160061R >70 (x10) 100 White MC812PA 1SNK160071R >80 (x10) 100 White MC812PA 1SNK160081R >90 (x10) 100 White MC812PA 1SNK16008R >100 (x10) 100 White MC812PA 1SNK160101R >110 (x10) 100 White MC812PA 1SNK160111R >120 (x10) 100 White MC812PA 1SNK160121R >10 (x10) 100 White MC812PA 1SNK16011R >140 (x10) 100 White MC812PA 1SNK160141R >150 (x10) 100 White MC812PA 1SNK160151R >160 (x10) 100 White MC812PA 1SNK160161R >170 (x10) 100 White MC812PA 1SNK160171R >180 (x10) 100 White MC812PA 1SNK160181R >190 (x10) 100 White MC812PA 1SNK160191R >200 (x10) 100 White MC812PA 1SNK160201R > White MC812PA 1SNK165011R > White MC812PA 1SNK165021R > White MC812PA 1SNK16501R > White MC812PA 1SNK165041R > White MC812PA 1SNK165051R > White MC812PA 1SNK165061R > White MC812PA 1SNK165071R > White MC812PA 1SNK165081R > White MC812PA 1SNK165091R A (x100) 100 White MC812PA 1SNK166011R B (x100) 100 White MC812PA 1SNK166021R C (x100) 100 White MC812PA 1SNK16601R D (x100) 100 White MC812PA 1SNK166041R E (x100) 100 White MC812PA 1SNK166051R F (x100) 100 White MC812PA 1SNK166061R G (x100) 100 White MC812PA 1SNK166071R H (x100) 100 White MC812PA 1SNK166081R I (x100) 100 White MC812PA 1SNK166091R J (x100) 100 White MC812PA 1SNK166101R K (x100) 100 White MC812PA 1SNK166111R L (x100) 100 White MC812PA 1SNK166121R M (x100) 100 White MC812PA 1SNK16611R N (x100) 100 White MC812PA 1SNK166141R O (x100) 100 White MC812PA 1SNK166151R P (x100) 100 White MC812PA 1SNK166161R Q (x100) 100 White MC812PA 1SNK166171R R (x100) 100 White MC812PA 1SNK166181R S (x100) 100 White MC812PA 1SNK166191R T (x100) 100 White MC812PA 1SNK166201R U (x100) 100 White MC812PA 1SNK166211R V (x100) 100 White MC812PA 1SNK166221R Continue on next page ABB SNK series - Terminal blocks 209 1SNK160010S Rev. A

212 MC812PA terminal block markers Pre-printed marker card for horizontal terminal block assembly 6 MC812PA 8 mm 0.15 in spacing Number of markers per card Color Type Order code Pkg Weight card (1 pce) g Continuation of previous page W (x100) 100 White MC812PA 1SNK16621R X (x100) 100 White MC812PA 1SNK166241R Y (x100) 100 White MC812PA 1SNK166251R Z (x100) 100 White MC812PA 1SNK166261R (x100) 100 White MC812PA 1SNK167001R (x100) 100 White MC812PA 1SNK167011R (x100) 100 White MC812PA 1SNK167021R (x100) 100 White MC812PA 1SNK16701R (x100) 100 White MC812PA 1SNK167041R (x100) 100 White MC812PA 1SNK167051R (x100) 100 White MC812PA 1SNK167061R (x100) 100 White MC812PA 1SNK167071R (x100) 100 White MC812PA 1SNK167081R (x100) 100 White MC812PA 1SNK167091R (x100) 100 White MC812PA 1SNK168001R (x100) 100 White MC812PA 1SNK168011R ~ (x100) 100 White MC812PA 1SNK168021R = (x100) 100 White MC812PA 1SNK16801R (x100) 100 White MC812PA 1SNK168041R L1 (x100) 100 White MC812PA 1SNK168051R L2 (x100) 100 White MC812PA 1SNK168061R L (x100) 100 White MC812PA 1SNK168071R PE (x100) 100 White MC812PA 1SNK168091R U1 (x100) 100 White MC812PA 1SNK168101R U2 (x100) 100 White MC812PA 1SNK168111R U (x100) 100 White MC812PA 1SNK168121R V1 (x100) 100 White MC812PA 1SNK16811R V2 (x100) 100 White MC812PA 1SNK168141R V (x100) 100 White MC812PA 1SNK168151R W1 (x100) 100 White MC812PA 1SNK168161R W2 (x100) 100 White MC812PA 1SNK168171R W (x100) 100 White MC812PA 1SNK168181R L1-L2-L-N-PE (x20) 100 White MC812PA 1SNK169001R U1-U2-U-V1-V2-V-W1- W2-W (x10) + U1 (x10) 100 White MC812PA 1SNK169011R SNK160010S Rev. A 210 ABB SNK series - Terminal blocks

213 MC812PA terminal block markers Pre-printed marker card for vertical terminal block assembly Save printing time with our large pre-printed cards offer with pre-printed numbers, letters or symbols. MC812PA 8 mm 0.15 in spacing Material Flammability Dimensions mm inches Polyamide V2 7.6 x x Number of markers per card Color Type Order code Pkg Weight card (1 pce) g 0->9 (x10) 100 White MC812PA 1SNK160092R >10 (x10) 100 White MC812PA 1SNK160012R >20 (x10) 100 White MC812PA 1SNK160022R >0 (x10) 100 White MC812PA 1SNK16002R >40 (x10) 100 White MC812PA 1SNK160042R >50 (x10) 100 White MC812PA 1SNK160052R >60 (x10) 100 White MC812PA 1SNK160062R >70 (x10) 100 White MC812PA 1SNK160072R >80 (x10) 100 White MC812PA 1SNK160082R >90 (x10) 100 White MC812PA 1SNK160084R >100 (x10) 100 White MC812PA 1SNK160102R >110 (x10) 100 White MC812PA 1SNK160112R >120 (x10) 100 White MC812PA 1SNK160122R >10 (x10) 100 White MC812PA 1SNK16012R >140 (x10) 100 White MC812PA 1SNK160142R >150 (x10) 100 White MC812PA 1SNK160152R >160 (x10) 100 White MC812PA 1SNK160162R >170 (x10) 100 White MC812PA 1SNK160172R >180 (x10) 100 White MC812PA 1SNK160182R >190 (x10) 100 White MC812PA 1SNK160192R >200 (x10) 100 White MC812PA 1SNK160202R > White MC812PA 1SNK165012R > White MC812PA 1SNK165022R > White MC812PA 1SNK16502R > White MC812PA 1SNK165042R > White MC812PA 1SNK165052R > White MC812PA 1SNK165062R > White MC812PA 1SNK165072R > White MC812PA 1SNK165082R > White MC812PA 1SNK165092R > White MC812PA 1SNK165102R A (x100) 100 White MC812PA 1SNK166012R B (x100) 100 White MC812PA 1SNK166022R C (x100) 100 White MC812PA 1SNK16602R D (x100) 100 White MC812PA 1SNK166042R E (x100) 100 White MC812PA 1SNK166052R F (x100) 100 White MC812PA 1SNK166062R G (x100) 100 White MC812PA 1SNK166072R H (x100) 100 White MC812PA 1SNK166082R I (x100) 100 White MC812PA 1SNK166092R J (x100) 100 White MC812PA 1SNK166102R K (x100) 100 White MC812PA 1SNK166112R L (x100) 100 White MC812PA 1SNK166122R M (x100) 100 White MC812PA 1SNK16612R N (x100) 100 White MC812PA 1SNK166142R O (x100) 100 White MC812PA 1SNK166152R P (x100) 100 White MC812PA 1SNK166162R Q (x100) 100 White MC812PA 1SNK166172R R (x100) 100 White MC812PA 1SNK166182R S (x100) 100 White MC812PA 1SNK166192R T (x100) 100 White MC812PA 1SNK166202R U (x100) 100 White MC812PA 1SNK166212R V (x100) 100 White MC812PA 1SNK166222R Continue on next page ABB SNK series - Terminal blocks 211 1SNK160011S Rev. A

214 MC812PA terminal block markers Pre-printed marker card for vertical terminal block assembly 6 MC812PA 8 mm 0.15 in spacing Number of markers per card Color Type Order code Pkg Weight card (1 pce) g Continuation of previous page W (x100) 100 White MC812PA 1SNK16622R X (x100) 100 White MC812PA 1SNK166242R Y (x100) 100 White MC812PA 1SNK166252R Z (x100) 100 White MC812PA 1SNK166262R (x100) 100 White MC812PA 1SNK167002R (x100) 100 White MC812PA 1SNK167012R (x100) 100 White MC812PA 1SNK167022R (x100) 100 White MC812PA 1SNK16702R (x100) 100 White MC812PA 1SNK167042R (x100) 100 White MC812PA 1SNK167052R (x100) 100 White MC812PA 1SNK167062R (x100) 100 White MC812PA 1SNK167072R (x100) 100 White MC812PA 1SNK167082R (x100) 100 White MC812PA 1SNK167092R (x100) 100 White MC812PA 1SNK168002R (x100) 100 White MC812PA 1SNK168012R ~ (x100) 100 White MC812PA 1SNK168022R = (x100) 100 White MC812PA 1SNK16802R (x100) 100 White MC812PA 1SNK168042R L1 (x100) 100 White MC812PA 1SNK168052R L2 (x100) 100 White MC812PA 1SNK168062R L (x100) 100 White MC812PA 1SNK168072R PE (x100) 100 White MC812PA 1SNK168092R U1 (x100) 100 White MC812PA 1SNK168102R U2 (x100) 100 White MC812PA 1SNK168112R U (x100) 100 White MC812PA 1SNK168122R V1 (x100) 100 White MC812PA 1SNK16812R V2 (x100) 100 White MC812PA 1SNK168142R V (x100) 100 White MC812PA 1SNK168152R W1 (x100) 100 White MC812PA 1SNK168162R W2 (x100) 100 White MC812PA 1SNK168172R W (x100) 100 White MC812PA 1SNK168182R V (x100) 100 White MC812PA 1SNK168192R V (x100) 100 White MC812PA 1SNK168202R V (x100) 100 White MC812PA 1SNK168212R V (x100) 100 White MC812PA 1SNK168222R L1-L2-L-N-PE (x20) 100 White MC812PA 1SNK169002R U1-U2-U-V1-V2-V-W1- W2-W (x10) + U1 (x10) 100 White MC812PA 1SNK169012R SNK160011S Rev. A 212 ABB SNK series - Terminal blocks

215 UMH universal wire markers holder MG2-TDMO clip-on blank wire marker Markers and marking systems 5.2 mm in spacing Install the UMH on the terminal blocks (strip mounting) and slide on the wire markers. UMH universal wire markers holder Compatible with MG2 - TDMO wire markers and most of the wire markers available on the market (wire markers not supplied with UMH); Quickly put it on any SNK terminal blocks and accessories: strip mounting of 10 parts for 5.2 mm in spacing, unitary mounting for other spacings. 5.2 mm in spacing Grey UMH 1SNK900611R Material specifications Insulating material Polyamide Flammability V0 NF F I2F2 Ambient temperature min/max Service IEC C F Storage C F Installing C F 6 MG2-TDMO clip-on blank wire marker Rigid Polycarbonate marker to be directly printed and snaped on the wire or the UMH wire marker holder, Print with support plate MG2-PTM. Material Flammability Temperature range MG2-TDMO 1SNC160118F0014 PC V0-40 C C, - 22 F F Dimensions Number of Color Type Order code SW Pkg Weight mm in markers per card code MG2-TDMO-01 4 x x White MG2-TDMO SNB04090R x x White MG2-TDMO SNB04091R x x Yellow MG2-TDMO SNB04040R x x Yellow MG2-TDMO SNB04041R MG2-TDMO-02 4 x x White MG2-TDMO SNB040490R x x White MG2-TDMO SNB040491R x x Yellow MG2-TDMO SNB040440R x x Yellow MG2-TDMO SNB040441R MG2-TDMO-0 4 x x White MG2-TDMO SNB040590R x x White MG2-TDMO SNB040591R x x Yellow MG2-TDMO SNB040540R x x Yellow MG2-TDMO SNB040541R MG KIT Marking system MG KIT AMS 250 AMS 500 HTP500 Support status Type Order code Pkg Weight Support plate Support plate for cable tags MG2-TDMO & MG-TDM 4x16mm Purchased separately MG2-PTM SNB991010R SNK16008S Rev. A ABB SNK series - Terminal blocks 21

216 MCLH label Markers and marking systems MCLH label Identify your terminal blocks assembly with the self adhesive label adapted to the LH label holders. MCLH - MCLH-R1 MCLH " Number of labels Color Type Order code Pkg Weight per unit for LH label holder 6 White MCLH 1SNK90060R Yellow MCLH-YL 1SNK9006R for LH-R1 label holder 15 White MCLH-R1 1SNK90061R Yellow MCLH-R1-YL 1SNK90064R " MCLH-R " " Material specifications Insulating material PVC + adhesive acrylic Flammability V0 NF F Ambient temperature min/max Service IEC C F Storage C F Installing C F Marking systems Type Order code Pkg Weight AMS plotter KIT MAO AMS 500 1SNA60000R Thermal transfer printer HTP500-V2 KIT 1SNA25700R AMS 500 Marking systems accessories Type Order code Pkg Weight Marking support plate for labels (AMS 500) SPRC 21 1SNA6001R HTP500-V2 KIT 1SNK160001S Rev. A 214 ABB SNK series - Terminal blocks

217 HTP500 thermal transfer printer Marking system Performance, High volume and serial production, Dedicated for ABB terminal blocks. HTP500-V2 KIT HTP500-CLEAN Thermal transfer printer KIT HTP500-V2 KIT 1SNA25700R List of items included in the KIT : 1 HTP500-V2 Thermal transfer printer HTP500-V2 1 software CD HTS500 1 power supply cable HTP500-PW 1 USB cable HTP500-USB 1 support table HTP500-BAS 1 universal feeder for marker cards HTP500-FEED 1 cleaning cassette HTP500-CLEAN 1 black ribbon cassette RIB-B 1 support plate for ABB terminal block markers HTP500-PL2 1 universal support plate for wire markers HTP500-PL 6 Feeders and support plates Universal feeder for marker cards HTP500-FEED 1SNA2570R Support plate for ABB terminal block markers HTP500-PL2 1SNA25705R Universal support plate for wire markers HTP500-PL 1SNA25704R HTP500-FEED HTP500-PL2 RIB-B Black ribbon cassette RIB-B 1SNA25710R0600 Red ribbon cassette for identification plates RIB-R 1SNA25711R200 and adhesive labels Red ribbon cassette for terminal blocks RIB-RS 1SNA25718R0200 and wire markers Cleaning cassette HTP500-CLEAN 1SNA25714R Standard cleaning roll ø18 HTP500-ROLL 1SNA25715R Printing head HTP500-PRINT 1SNA25716R Dust cover for HTP500 and AMS 500 systems DUST COVER 1SNA60161R Wooden box for HTP500-V2 KIT HTP500-WB 1SNA25717R Software CD HTS500 1SNA25702R000 1 Support table HTP500-BAS 1SNA25706R Power supply cable HTP500-PW 1SNA25709R SNK160015S Rev. A ABB SNK series - Terminal blocks 215

218 MG thermal transfer printer Kit and accessories Versatile, Compact and robust, Easy to install and use. 6 MG KIT Support plate MG2-... pce (1 pce) g MG Thermal transfer printer KIT MG KIT 1SNB419001R List of items included in the KIT: 1 MG Thermal transfer printer MG 1 Software CD MG SOFTWARE 1 Power supply cable MG POWER 1 USB cable MG USB 1 Protective cover MG2 COVE Ribbon take up spool MG2-CRB Black monochrome ribbon MG2-ETR Support plate for cable tags MG-TPM MG2-PWC Support plate for labels, cables, plates and MG2-PLT various markers 1 Support plate for terminal block markers MG2-QTB MG-CPM-01(5x10 and 5x15),02,0,04,07 1 Support plate for SNK series terminal block markers (MG-CPM-1) MG2-ETB Support plates pce (1 pce) g Support template for: Cable tags MG-TPM MG2-PWC SNB991000R Labels, cable tags, plates and various markers MG2-PLT SNB991002R Terminal block markers MG-CPM-05,12 MG2-WTB SNB991004R Terminal block markers MG-CPM-06 MG2-STB SNB991005R Terminal block markers MG-CPM-10 MG2-CTB SNB991006R Cable tags MG-TDM (4x12 mm) MG2-PTD SNB991007R Terminal block markers MG-CPM-01 (5x7 mm) MG2-MTB SNB991008R Cable tags MG2-TDMO and MG-TDM (4x16 mm) MG2-PTM SNB991010R Terminal block markers MG-CPM-01 MG2-QTB SNB991011R (5x10 and 5x15 mm),02,0,04,07 Terminal block markers ABB RC and MC series MG2-ABM SNB991012R Terminal block markers MG-CPM-09 MG2-LTB SNB99101R Terminal block markers SNK series MG-CPM-1 MG2-ETB SNB991016R PET blank cover for support plate pce (1 pce) g PET blank for support plate MG2-PWC MG2-TWC SNB991502R PET blank for support plate MG2-PLT MG2-TLT SNB991522R PET blank for support plate MG2-PTD MG2-TTD SNB99156R PET blank for support plate MG2-MTB MG2-TMT SNB99151R PET blank for support plate MG2-WTB MG2-TWT SNB991542R PET blank for support plate MG2-STB MG2-TST SNB991552R PET blank for support plate MG2-CTB MG2-TCT SNB991562R PET blank for support plate MG2-QTB MG2-TGT SNB99152R PET blank for support plate MG2-ETB MG2-TTB SNB991512R Ribbons MG2-ETR... pce (1 pce) g Print head cleaning kit MG2-CKP SNB991670R Black monochrome ribbon Black MG2-ETR SNB991600R Blue monochrome ribbon Blue MG2-ETR SNB991601R Red monochrome ribbon Red MG2-ETR SNB991602R Green monochrome ribbon Green MG2-ETR SNB99160R White monochrome ribbon White MG2-ETR SNB991606R SNC160112S Rev. A 216 ABB SNK series - Terminal blocks

219 AMS plotter Kit and accessories AMS 500 For basic marking applications, Economic, Full-size format, Print original manufacturers' markers. AMS 500 pce (1 pce) g AMS 500 Plotter KIT KIT MAO AMS 500 1SNA60000R List of items included in the KIT: 1 AMS 500 plotter pen printer AMS Software CD AMS SOFTWARE 1 Power supply cable AMS POWER 1 USB cable AMS USB 1 Support plate for RC / MC / RCTT / WMTT / SPRC1 BA4 / RCT 1 Support plate for MC...PA SPRC 0-1 Plotter pen Ø 0.25 mm.01 in AMS PEN Plotter pen Ø 0.5 mm.014 in AMS PEN Ink cartridges AMS INK CARTRIDGES 1 Cleaner fluid AMS CLEANER FLUID 1 Cleaner kit AMS CLEANER KIT 6 AMS 250 AMS 250 Basic needs, Economic, Half-size format Compatible with most of AMS 500 accessories. pce (1 pce) g AMS 250 Plotter KIT AMS 250 BASIC KIT 1SNA60000R List of items included in the KIT: 1 AMS 250 plotter pen printer AMS 250 BASIC 1 Software CD AMS SOFTWARE 1 Power supply cable AMS POWER 1 USB cable AMS USB 1 Support plate for BA4 / MC / RC / RCAL / SPRC2 RCT / RCTT 1 Disposable plotter pen Ø 0.25 mm.01 in EDR ink DISPOSABLE AMS PEN ED-R Disposable plotter pen Ø 0.5 mm.014 in EDR ink DISPOSABLE AMS PEN ED-R 0.5 1SNC160110S0201 ABB SNK series - Terminal blocks 217

220 AMS plotter Kit and accessories 6 SPRC1 SPRC2 SPRC0- AMS PEN AMS CLEANER KIT Support plates for ABB markers Compatibility Type Order code Pkg Weight AMS 500 AMS 250 pce (1 pce) g Support plates for: RC/MC/RCTT/WMTT/BA4/RCT full format SPRC 1 1SNA60010R RC/MC/RCTT/WMTT/BA4/RCT SPRC 2 1SNA60011R RB strips SPRC 4 1SNA60014R RTM7-9 SPRC 5 1SNA60015R PIB SPRC 1 1SNA6002R BA5-50 SPRC 14 1SNA60024R RC-X10A SPRC 15 1SNA60025R RC cards SPRC 16 1SNA60026R WM markers SPRC 26 1SNA6006R PAM strip SPRC 27 1SNA6007R RPCV markers SPRC 28 1SNA60040R RCL, P, W510 SPRC 29 1SNA6008R MC... PA SPRC 0-1SNA6009R A4 universal support plate SPRC 21 1SNA6001R Support plates for other manufacturers Compatibility Type Order code Pkg Weight AMS 500 AMS 250 pce (1 pce) g Support plates for markers: Wieland SPRC 6 1SNA60016R Weidmüller SPRC 7 1SNA60017R Phoenix ZBM 5/6 SPRC 8 1SNA60018R Phoenix ZB SPRC 9 1SNA60019R Allen Bradley WRZ SPRC 10 1SNA60020R Wago mini WSB5 SPRC 11 1SNA60021R Diameter Type Order code Pkg Weight Color pce (1 pce) g Plotter pen P 2.0 black ink Ø 0.18 mm in Red AMS PEN SNA6010R Ø 0.25 mm 0.01 in White AMS PEN SNA60100R Ø 0.5 mm in Yellow AMS PEN 0.5 1SNA60101R Ø 0.50 mm 0.02 in Brown AMS PEN SNA60104R Ø 0.70 mm in Blue AMS PEN SNA60105R Ø 1.00 mm 0.09 in Orange AMS PEN SNA60106R Disposable plotter pen Ø 0.25 mm 0.01 in White DISPOSABLE AMS PEN SNA60120R P 2.0 black ink Ø 0.5 mm in Yellow DISPOSABLE AMS PEN 0.5 1SNA60121R Disposable plotter pen Ø 0.18 mm in Red DISPOSABLE AMS PEN 1SNA60124R ED-R black ink ED-R 0.18 Ø 0.25 mm 0.01 in White DISPOSABLE AMS PEN 1SNA60122R ED-R 0.25 Ø 0.5 mm in Yellow DISPOSABLE AMS PEN 1SNA6012R ED-R ink cartridges 1 ml AMS INK CARTRIDGES 1SNA60150R cleaner fluid bottles, 2x10 ml AMS CLEANER FLUID 1SNA60155R Cleaner kit including: 1 rinse bottle and 1 blotting paper AMS CLEANER KIT 1SNA60156R Dust cover DUST COVER 1SNA60161R Service kit for pen maintenance SERVICE KIT FOR AMS 500 1SNA60162R Self-adhesive support for support plate SPRC 1 SPDST1 1SNA6016R Plotter head for AMS 500 including 1 printing module, 1 pen holder and 1 dust cover PEN HOLDER 1SNA60098R AMS INK CARTRIDGES 1SNC160111S Rev. A 218 ABB SNK series - Terminal blocks

ZK6 PI-Spring Terminal Blocks Feed-through

ZK6 PI-Spring Terminal Blocks Feed-through Technical Datasheet SNK69D0 Catalogue Page SNK69S0 ZK6 PI-Spring Terminal Blocks Feed-through Combine high performance with compact dimensions: - 000 V AC / DC IEC 600 V UL, - Opt for the best marking

More information

Main catalogue. SNK Series Terminal Blocks Accessories Marking Solutions

Main catalogue. SNK Series Terminal Blocks Accessories Marking Solutions Main catalogue SNK Series Terminal Blocks Accessories Marking Solutions Summary See page 7 1SNK161026S0201 SNK Series, Terminal Blocks Screw clamp terminal blocks Accessories Marking solutions 1 A Smart

More information

ZK2.5-4P PI-Spring Terminal Blocks Feed-through with 4 connections

ZK2.5-4P PI-Spring Terminal Blocks Feed-through with 4 connections Technical Datasheet SNK60D00 Catalogue Page SNK605S00 ZK.5-P PI-Spring Terminal Blocks Feed-through with connections Find all the features of the ZK.5 terminal block with the added option of distributing

More information

ZK4-PE PI-Spring Terminal Blocks Ground

ZK4-PE PI-Spring Terminal Blocks Ground Technical Datasheet SNK60D00 Catalogue Page SNK60S00 ZK-PE PI-Spring Terminal Blocks Ground Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact:

More information

ZK2.5-D1-PE PI-Spring Terminal Blocks Double deck with 1 ground circuit

ZK2.5-D1-PE PI-Spring Terminal Blocks Double deck with 1 ground circuit Technical Datasheet SNK6040D00 Catalogue Page SNK604S00 ZK.-D-PE PI-Spring Terminal Blocks Double deck with ground circuit Improve the safety of your installation in the event of a short-circuit thanks

More information

ZK2.5-SF-R PI-Spring Terminal Blocks For 5x20 fuses - with blown fuse indicator

ZK2.5-SF-R PI-Spring Terminal Blocks For 5x20 fuses - with blown fuse indicator Technical Datasheet SNK605D00 Catalogue Page SNK60S00 ZK.5-SF-R PI-Spring Terminal Blocks For 5x0 fuses - with blown fuse indicator - Protect your circuits with 5x0 fuse terminal blocks compliant with

More information

ZK2.5-4P PI-Spring Terminal Blocks Feed-through with 4 connections

ZK2.5-4P PI-Spring Terminal Blocks Feed-through with 4 connections Technical Datasheet 1SNK161D01 Catalogue Page 1SNK165S01 ZK.5-4P PI-Spring Terminal Blocks Feed-through with 4 connections Find all the features of the ZK.5 terminal block with the added option of distributing

More information

ZK2.5-SP PI-Spring Terminal Blocks Disconnect with plug - with test sockets

ZK2.5-SP PI-Spring Terminal Blocks Disconnect with plug - with test sockets Technical Datasheet SNK603D00 Catalogue Page SNK6038S00 ZK.5-SP PI-Spring Terminal Blocks Disconnect with plug - with test sockets The flexible solution for fitting the component of your choice in series

More information

ZS6 Screw Clamp Terminal Blocks Feed-through

ZS6 Screw Clamp Terminal Blocks Feed-through Technical Datasheet SNK6008D00 Catalogue Page ZS6 Screw Clamp Terminal Blocks Feed-through Save space by connecting conductors up to 6 mm² (without insulated ferrule, CB certified) 0 AWG in just 6 mm 0.36

More information

ZS6-3S Screw Clamp Terminal Blocks Feed-through with 3 connections

ZS6-3S Screw Clamp Terminal Blocks Feed-through with 3 connections Technical Datasheet SNK663D00 Catalogue Page SNK667S00 ZS6-3S Screw Clamp Terminal Blocks Feed-through with 3 connections - Recommended for energy markets and highly demanding applications requiring that

More information

ZK2.5-SP-4P PI-Spring Terminal Blocks Disconnect with plug - with test socket

ZK2.5-SP-4P PI-Spring Terminal Blocks Disconnect with plug - with test socket Technical Datasheet 1SNK1659D01 Catalogue Page 1SNK160S01 ZK2.5-SP-P PI-Spring Terminal Blocks Disconnect with plug - with test socket The flexible solution for fitting the component of your choice in

More information

ZK4-4P PI-Spring Terminal Blocks Feed-through with 4 connections

ZK4-4P PI-Spring Terminal Blocks Feed-through with 4 connections Technical Datasheet 1SNK167D01 Catalogue Page 1SNK16S01 ZK4-4P PI-Spring Terminal Blocks Feed-through with 4 connections Find all the features of the ZK4 terminal block with the added option of distributing

More information

ZK2.5-PE-4P PI-Spring Terminal Blocks Ground with 4 connections

ZK2.5-PE-4P PI-Spring Terminal Blocks Ground with 4 connections Technical Datasheet 1SNK16D01 Catalogue Page 1SNK1641S01 ZK.5-PE-4P PI-Spring Terminal Blocks Ground with 4 connections Improve the safety of your installation in the event of a short-circuit thanks to

More information

ZS10-PE Screw Clamp Terminal Blocks Ground

ZS10-PE Screw Clamp Terminal Blocks Ground Technical Datasheet SNK606D00 Catalogue Page ZS0-PE Screw Clamp Terminal Blocks Ground Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: - Rail

More information

ZS10 Screw Clamp Terminal Blocks Feed-through

ZS10 Screw Clamp Terminal Blocks Feed-through Technical Datasheet SNK6004D00 Catalogue Page SNK6004S00 ZS0 Screw Clamp Terminal Blocks Feed-through Save space by connecting conductors up to 0 mm² (CB certified) 6 AWG in just 8 mm 0. in spacing. SNK6008F004

More information

ZS4 Screw Clamp Terminal Blocks Feed-through

ZS4 Screw Clamp Terminal Blocks Feed-through Technical Datasheet SNK60D0 Catalogue Page SNK60S0 ZS4 Screw Clamp Terminal Blocks Feed-through Save space by connecting conductors up to 4 mm² (CB certified) AWG in just. mm 0. in spacing. SNK60F00 SNK0000F0000

More information

ZS4-PE Screw Clamp Terminal Blocks Ground

ZS4-PE Screw Clamp Terminal Blocks Ground Technical Datasheet SNK600D00 Catalogue Page ZS4-PE Screw Clamp Terminal Blocks Ground Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: - Rail

More information

ZS6 Screw Clamp Terminal Blocks Feed-through

ZS6 Screw Clamp Terminal Blocks Feed-through Technical Datasheet SNK608D0 Catalogue Page SNK608S0 ZS6 Screw Clamp Terminal Blocks Feed-through Save space by connecting conductors up to 6 mm² (CB certified) AWG in just 6 mm 0.6 in spacing. SNK6F004

More information

ZS4-SF Screw Clamp Terminal Blocks For 5 x 20 fuses

ZS4-SF Screw Clamp Terminal Blocks For 5 x 20 fuses Technical Datasheet SNK60D00 Catalogue Page ZS-SF Screw Clamp Terminal Blocks For x 0 fuses - Protect your circuits with x0 fuse terminal blocks compliant with IEC 607-7-3 standard (fuse not supplied with

More information

ZS6-4S Screw Clamp Terminal Blocks Feed-through with 4 connections

ZS6-4S Screw Clamp Terminal Blocks Feed-through with 4 connections Technical Datasheet 1SNK166D01 Catalogue Page 1SNK166S01 ZS6-4S Screw Clamp Terminal Blocks Feed-through with 4 connections - High density wiring (one potential distribution on 4 independent screw clamps)

More information

ZS10-S-R2 Screw Clamp Terminal Blocks Disconnect with lever

ZS10-S-R2 Screw Clamp Terminal Blocks Disconnect with lever Technical Datasheet SNK6D0 Catalogue Page ZS-S-R2 Screw Clamp Terminal Blocks Disconnect with lever Simplify the disconnect operations for the disconnect terminal blocks installed next to fuse terminal

More information

ZS50-PE Screw Clamp Terminal Blocks Ground

ZS50-PE Screw Clamp Terminal Blocks Ground Technical Datasheet SNK607D00 Catalogue Page ZS0-PE Screw Clamp Terminal Blocks Ground - Reliable electrical and mechanical contact with the rail that exceeds the requirements of the IEC 60947-7- terminal

More information

ZS4-PE Screw Clamp Terminal Blocks Ground

ZS4-PE Screw Clamp Terminal Blocks Ground Technical Datasheet SNK60D0 Catalogue Page SNK60S0 ZS4-PE Screw Clamp Terminal Blocks Ground Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact:

More information

ZS4-D2-S-T Screw Clamp Terminal Blocks Double deck with 1 disconnect circuit with test socket screws and 1 feed-through circuit

ZS4-D2-S-T Screw Clamp Terminal Blocks Double deck with 1 disconnect circuit with test socket screws and 1 feed-through circuit Technical Datasheet SNK607D00 Catalogue Page SNK607S00 ZS4-D-S-T Screw Clamp Terminal Blocks Double deck with disconnect circuit with test socket screws and feed-through circuit Find the same functionalities

More information

ZS35 Screw Clamp Terminal Blocks Feed-through

ZS35 Screw Clamp Terminal Blocks Feed-through Technical Datasheet SNK609D00 Catalogue Page ZS3 Screw Clamp Terminal Blocks Feed-through Closed terminal block: - No end section needed, - Optimized rigidity, - Perfectly adapted to solar applications:

More information

ZS10-ST Screw Clamp Terminal Blocks Test disconnect with sliding link

ZS10-ST Screw Clamp Terminal Blocks Test disconnect with sliding link Technical Datasheet SNK656D0 Catalogue Page ZS-ST Screw Clamp Terminal Blocks Test disconnect with sliding link - Secure your disconnect operations in control circuits with the robust sliding link operated

More information

ZS6-D1-PE Screw Clamp Terminal Blocks Double deck with 1 ground circuit

ZS6-D1-PE Screw Clamp Terminal Blocks Double deck with 1 ground circuit Technical Datasheet SNK649D00 Catalogue Page ZS6-D-PE Screw Clamp Terminal Blocks Double deck with ground circuit - Save space with double deck ground terminal blocks aligned with ZS6-D double deck terminal

More information

ZK2.5-D-CH PI-Spring Terminal Blocks Component holder

ZK2.5-D-CH PI-Spring Terminal Blocks Component holder Technical Datasheet SNK6066D00 Catalogue Page ZK.-D-CH PI-Spring Terminal Blocks Component holder Protect your circuit with one N4007 diode. SNK60V004 SNK009F0000 3D CAD outline drawings available on "Control

More information

ZS4-SF1-T Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with test socket

ZS4-SF1-T Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with test socket Technical Datasheet 1SNK166D001 Catalogue Page ZS-SF1-T Screw Clamp Terminal Blocks For x 0 and x fuses - with test socket - Protect your circuit with x and x0 fuse terminal blocks (fuse not supplied with

More information

ZS4-SF1 Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses

ZS4-SF1 Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses Technical Datasheet SNK6D00 Catalogue Page ZS-SF Screw Clamp Terminal Blocks For 5 x 0 and 5 x 5 fuses Protect your circuit with 5x5 and 5x0 fuse terminal blocks, compliant with IEC 607-7-3 standard (fuse

More information

ZS4-S Screw Clamp Terminal Blocks Disconnect with blade

ZS4-S Screw Clamp Terminal Blocks Disconnect with blade Technical Datasheet SNK6D00 Catalogue Page SNK6S00 ZS4-S Screw Clamp Terminal Blocks Disconnect with blade - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,

More information

ZS6-S Screw Clamp Terminal Blocks Disconnect with blade

ZS6-S Screw Clamp Terminal Blocks Disconnect with blade Technical Datasheet SNK646D00 Catalogue Page ZS6-S Screw Clamp Terminal Blocks Disconnect with blade - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,

More information

ZS4-D-CH Screw Clamp Terminal Blocks Component holder

ZS4-D-CH Screw Clamp Terminal Blocks Component holder Technical Datasheet SNK6090D00 Catalogue Page ZS4-D-CH Screw Clamp Terminal Blocks Component holder Protect your circuit with one N4007 diode. SNK64V004 SNK008F0000 3D CAD outline drawings available on

More information

ZS4-SF1-R Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with blown fuse indicator

ZS4-SF1-R Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with blown fuse indicator Technical Datasheet SNK63D00 Catalogue Page SNK63S00 ZS-SF-R Screw Clamp Terminal Blocks For x 0 and x fuses - with blown fuse indicator - Protect your circuit with x and x0 fuse terminal blocks (fuse

More information

ZS4-T3 Screw Clamp Terminal Blocks Triple deck with 3 feed-through circuits

ZS4-T3 Screw Clamp Terminal Blocks Triple deck with 3 feed-through circuits Technical Datasheet 1SNK1107D001 Catalogue Page 1SNK1107S001 ZS4-T Screw Clamp Terminal Blocks Triple deck with feed-through circuits Save space: independent circuits in just. mm 0.0 in spacing, - Fit

More information

ZS35-PEN Screw Clamp Terminal Blocks Ground + Neutral

ZS35-PEN Screw Clamp Terminal Blocks Ground + Neutral Technical Datasheet SNK6047D00 Catalogue Page ZS35-PEN Screw Clamp Terminal Blocks Ground + Neutral Simplify your PE.N connection with ZS35-PE block connected to ZS35-BL through a premounted jumper. SNK6063F004

More information

ZS4-SF1-R Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with blown fuse indicator

ZS4-SF1-R Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with blown fuse indicator Technical Datasheet SNK63D00 Catalogue Page SNK63S00 ZS-SF-R Screw Clamp Terminal Blocks For x 0 and x fuses - with blown fuse indicator - Protect your circuit with x and x0 fuse terminal blocks (fuse

More information

ZDP Pluggable Terminal Blocks Feed-through

ZDP Pluggable Terminal Blocks Feed-through Technical Datasheet 1SNK161D01 Catalogue Page 1SNK161S01 ZDP.- Pluggable Terminal Blocks Feed-through - Save in flexibility, reliability and simplicity thanks to the pluggable terminal blocks ZDP, - They

More information

ZP2.5-PE Spring Terminal Block Ground

ZP2.5-PE Spring Terminal Block Ground Technical Datasheet 1SNK162002D0201.indd 08/06/11 ZP2.5-PE Spring Terminal Block Ground Catalogue Page Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail

More information

ZP2.5-4P Spring Terminal Block Feed-through

ZP2.5-4P Spring Terminal Block Feed-through Technical Datasheet 1SNK162005D0201.indd 08/06/11 ZP2.5-4P Spring Terminal Block Feed-through Catalogue Page Thanks to the ZP2.5-4P, PI-Spring terminal block: Save time and connect directly rigid and flexible

More information

DBL distribution blocks 3x1 pole

DBL distribution blocks 3x1 pole TECHNICAL DATASHEET 1SNC166019D0201 - CATALOGUE PAGE 1SNC166020S0201 DBL distribution blocks 3x1 pole 84.6 3.33" 25 0.98" 32.5 1.28" 28.2 1.11" 23.5 0.93" 14.7 0.58" 36.3 1.43" 75 2.95" 62 2.44" 50.7 2"

More information

ZS4-SF1 Screw Clamp Terminal Block

ZS4-SF1 Screw Clamp Terminal Block Technical Datasheet 1SNK 161 011 D0201 ZS4-SF1 Screw Clamp Terminal Block Fuse Catalogue Page 1SNK 161 011 S0201 4 mm² 10 AWG 8 mm 0.315 in Spacing Features and Benefits 90 90 180 59.7 2.35" - Protect

More information

MS General Information Extended Product Type: MS

MS General Information Extended Product Type: MS MS132-1.6 General Information Extended Product Type: MS132-1.6 Product ID: 1SAM350000R1006 EAN: 4013614400063 Catalog Description: MS132-1.6 Manual Motor Starter Long Description: The MS132-1.6 manual

More information

IEC TERMINAL BLOCKS. Screw Clamp Connection. Feed Through DIN Rail 433. Ground DIN Rail 439. Fuse Holder DIN Rail 445. Disconnect DIN Rail 448

IEC TERMINAL BLOCKS. Screw Clamp Connection. Feed Through DIN Rail 433. Ground DIN Rail 439. Fuse Holder DIN Rail 445. Disconnect DIN Rail 448 CONTROL LOGIC IEC TERMINAL BLOCKS TB c3controls line of IEC terminal blocks are both innovative and user-friendly. They are simple to install and are color-coded for easy circuit identification. From standard

More information

Terminal Blocks/Wiring Systems/Signal Conditioners Table of Contents

Terminal Blocks/Wiring Systems/Signal Conditioners Table of Contents Terminal Blocks/Wiring Systems/Signal Conditioners Table of Contents IEC Accessories and Technical Specifications DIN Mounting Rails Page - End Barriers Page - End Anchors/Retainers Page - Partition Plates

More information

Bulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks

Bulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven method

More information

8WH2 Spring-Loaded Terminals

8WH2 Spring-Loaded Terminals 8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25

More information

XB IEC Terminal Blocks. Screw Type Insulation Displacement Connection Type

XB IEC Terminal Blocks. Screw Type Insulation Displacement Connection Type XB IEC Terminal Blocks Screw Type Spring Cage Type Insulation Displacement Connection Type 2 XB IEC Terminal Blocks. Versatility, quality, and reliability. Sometimes it s the little things Eaton knows

More information

8WH2 Spring-Loaded Terminals

8WH2 Spring-Loaded Terminals 8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25

More information

Short form catalogue. Motor protection & control

Short form catalogue. Motor protection & control Short form catalogue Star Series Motor protection & control Motor Protection and Control up to 25 HP / 600 VAC Overview...2 Contactors and Overload Relays...11 4-pole Contactors...41 Control Relays...59

More information

Bulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks

Bulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven method

More information

X-COM - and X-COM S-SYSTEM Pluggable Rail-Mounted Terminal Blocks

X-COM - and X-COM S-SYSTEM Pluggable Rail-Mounted Terminal Blocks X-COM - and X-COM S-SYSTEM Pluggable Rail-Mounted Terminal Blocks 2 Contents X-COM -SYSTEM 04 Installation 07 X-COM -SYSTEM at a Glance 08 X-COM S-SYSTEM 12 Installation 14 X-COM S-SYSTEM at a Glance 16

More information

Terminal blocks with clamping yoke and screw connection system

Terminal blocks with clamping yoke and screw connection system Overview W-Series Terminal blocks with clamping yoke and screw connection system High contact reliability for all standard electrical functions For a long time now, Weidmüller s W-Series terminal with

More information

Bulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks

Bulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven method

More information

I r A short-circuit protective device: Observe the maximum permissible fuse of the contactor with direct device mounting.

I r A short-circuit protective device: Observe the maximum permissible fuse of the contactor with direct device mounting. DATASHEET - ZB12-2,4 Delivery program Overload relay, 1.6-2.4 A, 1N/O+1N/C Part no. ZB12-2,4 Catalog No. 278437 Eaton Catalog No. XTOB2P4BC1 EL-Nummer 0004131832 (Norway) Product range Overload relay ZB

More information

Approvals (p. 906) 0 371 61 0 371 63 0 371 64 0 371 66 0 371 69 0 371 68 0 371 00 0 371 08 0 371 20 Connecting (p. 300) 1 connection - 1 entry/1 outlet ELECTRICAL FUNCTION TERMINAL BLOCKS INSULATION EQUIPOTENTIAL

More information

MS /27/2015. ABB contact for United States of America. General Information Extended Product Type: Categories

MS /27/2015. ABB contact for United States of America. General Information Extended Product Type: Categories Page 1 of 5 MS132-10 ABB contact for United States of America General Information Extended Product Type: Product ID: EAN: Catalog Description: Long Description: MS132-10 1SAM350000R1010 4013614400100 MS132-10

More information

Main catalogue. ESSAILEC Test Blocks

Main catalogue. ESSAILEC Test Blocks Main catalogue ESSAILEC Test Blocks Test Blocks ESSAILEC has been especially designed to fit the electricity Utilities requirements for safe and reliable testing. ESSAILEC allows the testing, without any

More information

Datasheet WMF 2.5 Terminal Series NEW. Phone: Fax: Web: -

Datasheet WMF 2.5 Terminal Series NEW. Phone: Fax: Web:  - Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and

More information

Electronic Circuit Breaker ESS20-0..

Electronic Circuit Breaker ESS20-0.. Electronic Circuit Breaker ES-0.. Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode

More information

OUR POWER TEAM. High-Current DIN-Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil) vibration-proof fast maintenance-free

OUR POWER TEAM. High-Current DIN-Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil) vibration-proof fast maintenance-free OUR POWER TEAM High-Current DIN-Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil) vibration-proof fast maintenance-free BENEFITS Primary applications: Energy-intensive industries, including

More information

Datasheet. W-series terminal with clamping yoke connection WDU 4

Datasheet. W-series terminal with clamping yoke connection WDU 4 The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality

More information

Datasheet. W-series terminal with clamping yoke connection WDU 2.5 RT

Datasheet. W-series terminal with clamping yoke connection WDU 2.5 RT The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality

More information

Selection Guide Motor Control Device Solutions

Selection Guide Motor Control Device Solutions Selection Guide Motor Control Device Solutions Expect more and get it from c3controls. Our portfolio of Motor Control Devices consists of worldclass products designed and manufactured to meet your requirements

More information

249.1 m3/h m3/h 7.23 MW m3/h 50.0 m3/h

249.1 m3/h m3/h 7.23 MW m3/h 50.0 m3/h No Filter 81.6 % Auto 9.1 m3/h 250.0 m3/h Auto 99.7 m3/h 100.0 m3/h Auto 91.3 m3/h 92.0 m3/h Auto 40.0 m3/h 7. MW Auto 50.7 m3/h 50.0 m3/h 7.2 % Auto.6 % 45.0 % ABB NF Contactor Relays Overview...3 Ordering

More information

DATASHEET - ZB Delivery program. Overload relay, 50-65A, 1N/O+1N/C. Catalog No Eaton Catalog No. XTOB065DC1 EL-Nummer

DATASHEET - ZB Delivery program. Overload relay, 50-65A, 1N/O+1N/C. Catalog No Eaton Catalog No. XTOB065DC1 EL-Nummer DATASHEET - ZB65-65 Delivery program Overload relay, 50-65A, 1N/O+1N/C Part no. ZB65-65 Catalog No. 278460 Eaton Catalog No. XTOB065DC1 EL-Nummer 0004131855 (Norway) Product range Overload relay ZB up

More information

Our Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil)

Our Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil) Our Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (50 kcmil) Vibration-Proof Fast Maintenance-Free WAGO BENEFITS The key to WAGO s success: springs, not screws. This

More information

Data sheet. W-Series WDU 4 SL/EN

Data sheet. W-Series WDU 4 SL/EN At Weidmüller, new solutions for the energy sector are developed according to local or application-based installation requirements. In some countries, control and protection of switching installations

More information

NEW. Datasheet. WMF 2.5 Terminal Series

NEW. Datasheet. WMF 2.5 Terminal Series Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and

More information

Viking 3 - Screw connection Disconnect terminal blocks

Viking 3 - Screw connection Disconnect terminal blocks 87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Viking 3 - Screw connection 1. General features... 1 2. Range...2 3. Standards... 2 4. Technical features... 3 5. Dimensions...

More information

Bulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks

Bulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven method

More information

Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series

Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series 28 Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series 281... Blown fuse indication Exchange of fuse Blown fuse indication by LED or neon lamp Before exchanging the

More information

Load and Motor Switches, Load-Break Switches Series 8549

Load and Motor Switches, Load-Break Switches Series 8549 www.stahl.de > Innovative switch concept > State-of-the-art contact arrangement > Easy and clear connection technology > Wiring channel for auxiliary contacts > Retrofittable: Pick-off terminal block Auxiliary

More information

Ex-proof proportional relief valves Direct or pilot operated, without transducer - ATEX, IECEx, EAC or CULUS

Ex-proof proportional relief valves Direct or pilot operated, without transducer - ATEX, IECEx, EAC or CULUS Table FX1-/E Replaces F6-5 /E E125-16 /E Ex-proof proportional relief valves Direct or pilot operated, without transducer - ATEX, IECEx, EAC or CULUS Valve main body Cartridge Mechanical pressure limiter

More information

AF / AF30Z stack 3-pole Contactors AC / DC Operated - with Screw Terminals

AF / AF30Z stack 3-pole Contactors AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101415D0201 25/03/11 AF30-30-11-.. / AF30Z-30-11-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF30(Z) contactors are used for controlling power circuits

More information

NF31E-.. / NFZ31E-.. Contactor Relays AC / DC Operated - with Screw Terminals

NF31E-.. / NFZ31E-.. Contactor Relays AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101428D0201 28/03/11 -.. / NFZ31E-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits. NF(Z)

More information

AF / AF09Z pole Contactors AC / DC Operated - with Screw Terminals

AF / AF09Z pole Contactors AC / DC Operated - with Screw Terminals Technical Datasheet SBC042D020 06/04/ -22-00-.. / Z-22-00-.. 4-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 440 V DC.

More information

AF / AF12Z pole Contactors AC / DC Operated - with Screw Terminals

AF / AF12Z pole Contactors AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101404D0201 24/03/11-30-10-.. / Z-30-10-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220

More information

Terminal Blocks Product Catalog Terminal Block Supplement. Introduction. 8WH6 ipo Plug-In Terminals. 8WH6 ipo Installation Terminals

Terminal Blocks Product Catalog Terminal Block Supplement. Introduction. 8WH6 ipo Plug-In Terminals. 8WH6 ipo Installation Terminals Terminal Blocks 2013 Product Catalog Terminal Block Supplement Introduction 8WH6 ipo Plug-In Terminals 8WH6 ipo Installation Terminals 8WH2 Spring-Loaded Terminals 1 2 3 4 8WH 8WH5 Combination Plug-In

More information

Up to 60 A Class R 250 V and 600 V ferrule power distribution fuse blocks

Up to 60 A Class R 250 V and 600 V ferrule power distribution fuse blocks Technical Data 09 Effective June 06 Up to 60 A Class R 50 V and 600 V ferrule power distribution fuse blocks Catalog symbols: RM5060-_MW_ RM60030-_MW_ RM60060-_MW_ Features and benefits: Combination power

More information

Terminal Blocks/Wiring Systems/Signal Conditioners Table of Contents

Terminal Blocks/Wiring Systems/Signal Conditioners Table of Contents Terminal Blocks/Wiring Systems/Signal Conditioners Table of Contents IEC Accessories and Technical Specifications DIN Mounting Rails Page - End Barriers Page - End Anchors/Retainers Page - Partition Plates

More information

I power distribution. Blocks. challenges. Finger-Safe / FSPDB Series...I2. MPDB Open-Style PDBs... I4. MPDB62-MPDB63 (Mini) Open-Style PDBs...

I power distribution. Blocks. challenges. Finger-Safe / FSPDB Series...I2. MPDB Open-Style PDBs... I4. MPDB62-MPDB63 (Mini) Open-Style PDBs... Power Distribution Blocks I A powerful way to manage your power distribution challenges. Your problem: You re facing the enormously complex wiring requirements of an automated manufacturing facility. Or

More information

New VikingTM 3, the innovation

New VikingTM 3, the innovation New VikingTM 3, the innovation Screw or automatic spring connection A new range, born of research & EXPERIENCE INDEX Screw connection... 2 Automatic spring connection... 4 Common accessories... 6 Selection

More information

Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35

Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35 General ordering data Order No. 1608570000 Part designation 2.5/4AN Version EAN 4008190077136 Qty. 100 pc(s). Feed-through terminal,, Tension clamp connection, Wemid, Product notes Product description

More information

AF / AF16Z pole Contactors AC / DC Operated - with Screw Terminals

AF / AF16Z pole Contactors AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101408D0201 25/03/11-30-01-.. / Z-30-01-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220

More information

Data sheet... W-Series WPE 4

Data sheet... W-Series WPE 4 The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² WPE 4N). General ordering data Order No. 1010100000

More information

Series L9 UL489 Miniature Circuit Breakers

Series L9 UL489 Miniature Circuit Breakers Series L9 UL489 iniature Circuit Breakers Industrial Circuit Breakers for Branch Circuit Protection up to 63 Amps L9 Series B Circuit Breakers Series B L9 UL489 circuit breakers offer new features, expanded

More information

AF / AF09Z pole Contactors AC / DC Operated - with Screw Terminals

AF / AF09Z pole Contactors AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101419D0201 06/04/11-40-00-.. / Z-40-00-.. 4-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 440

More information

Our Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil)

Our Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil) Our Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (50 kcmil) vibration-proof fast maintenance-free WAGO BENEFITS Using springs instead of screws is the key to WAGO s

More information

Terminal Blocks. Section 12. Control Catalog 12-1

Terminal Blocks. Section 12.  Control Catalog 12-1 CR151K Resilient Modular Terminal Blocks CR151C (top) and CR151A Modular Terminal Blocks DIN-rail Mounted Terminal Blocks (CR151K)...12-2 Product Tables...12-3, 12-4 Accessories...12-3, 12-4 Technical

More information

AF / AF38Z pole Contactors AC / DC Operated - with Screw Terminals

AF / AF38Z pole Contactors AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101412D0201 25/03/11-30-00-.. / Z-30-00-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220

More information

AF09... AF30 3-pole Contactors up to 25 HP / 600 VAC

AF09... AF30 3-pole Contactors up to 25 HP / 600 VAC AF09... AF0 -pole Contactors up to 25 HP / 600 VAC Contactors and Overload Relays Overview.../0 AF09... AF0 -pole Contactors.../2 Main Technical Data.../8 Main Accessory Fitting Details.../2 Main Accessory.../24

More information

BETA Switching Switches and Light Indicators

BETA Switching Switches and Light Indicators Siemens AG 2008 BETA Switching /2 Product overview /3 5TE8 control switches / 5TE4 pushbuttons /2 5TE5 light indicators /5 5TE8 ON/OFF switches /22 5TE9 busbars /24 5TE switch disconnectors Siemens ET

More information

AF40... AF96 3-pole contactors Technical data

AF40... AF96 3-pole contactors Technical data Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional

More information

A powerful way to manage your power distribution challenges. I Power Distribution Blocks

A powerful way to manage your power distribution challenges. I Power Distribution Blocks I Power Distribution Blocks A powerful way to manage your power distribution challenges. Your problem: You re facing the enormously complex wiring requirements of an automated manufacturing facility. Or

More information

Class R 250V and 600V modular ferrule and knifeblade fuse blocks

Class R 250V and 600V modular ferrule and knifeblade fuse blocks Technical Data 1048 Class R 2V and 600V modular ferrule and Knifeblade fuse blocks from 100 to 600 amps feature phase barriers between poles for additional safety with up to four mounting holes per pole

More information

Series KTU7 UL489 Molded Case Circuit Breakers

Series KTU7 UL489 Molded Case Circuit Breakers Series KTU7 UL489 Molded Case Circuit Breakers Versatile, convenient and space saving for a variety of applications Sprecher+Schuh s KTU7 series of UL Molded Case Circuit Breakers are UL489 and CE listed

More information

Selection Guide. Control Circuit and Load Protection

Selection Guide. Control Circuit and Load Protection Selection Guide Control Circuit and Load Protection Circuit Protection Portfolio 1489-M Circuit Breakers Approved for branch circuit protection in the United States and Canada, and certified as Miniature

More information

Data sheet... W terminal earth terminal WPE 4

Data sheet... W terminal earth terminal WPE 4 The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² N). General ordering data Order No. 1010100000 Type

More information

8WH6 ipo Plug-In Terminals

8WH6 ipo Plug-In Terminals / Introduction /3 /4 8WH6 through-type terminals /8 8WH6 fuse terminals /9 8WH6 isolating blade terminals /11 8WH6 isolating terminals /13 8WH6 two-tier terminals More technical product information: Service&Support

More information