Printview: Multilevel installation terminal block; N/L - Item No.:

Size: px
Start display at page:

Download "Printview: Multilevel installation terminal block; N/L - Item No.:"

Transcription

1 Multilevel installation terminal block; N/L Item No: Multilevel installation terminal block; N/L Marking Business data Supplier WAGO Item no EAN Content Order amount 0 Customer item number Notes Technical data Miscellaneous Total number of connection points 4 Total number of potentials 2 Number of levels 3 Color gray Pollution degree () 3 Rated voltage EN () [V] 400 [V] Rated surge voltage () [kv] 6 [kv] Nominal current [A] 32 [A] Connection technology () CAGE CLAMP Cross section from () [mm²] 008 [mm²]

2 Technical data Cross section up to () [mm²] Cross section from () [AWG] Cross section up to () [AWG] Stripped length from () [mm] Stripped length up to () [mm] Stripped length () [in] Type of wiring Design Marking level Fire load [MJ] Weight [g] Width [mm] Width [in] Height [mm] Height [in] Length [mm] Length [in] Type of mounting 4 [mm²] 28 [AWG] 2 [AWG] 9 [mm] 0 [mm] 037 [in] Front-entry wiring angled Center marking 0286 [MJ] 7886 [g] 6 [mm] 0236 [in] 43 [mm] 73 [in] 8 [mm] 466 [in] DIN 3 rail Approbation Item No Registration Registration no Voltage [V] Current [A] Cross section [mm², AWG] CCA NL CCA NTR NL CCA GL HH KEMA

3 Insulation stop Insulation stop; mm² "s" (04 mm² "f-st"); pieces/strip Insulation stop; 02-0 mm²; pieces/strip Insulation stop; 07 - mm²; pieces/strip 2 Jumper Push-in type wire jumper; insulated; wire length 80 mm; Conductor cross section 07 mm² Push-in type wire jumper; insulated; wire length 60 mm; Conductor cross section 07 mm² Push-in type wire jumper; insulated; wire length 0 mm; Conductor cross section 07 mm² Push-in type wire jumper; insulated; wire length 20 mm; Conductor cross section 07 mm² Adjacent jumper; insulated; IN = IN terminal block; Nominal current 32 A Alternate jumper; insulated; IN = IN terminal block; Nominal current 32 A Vertical jumper; insulated; nominal current 24 A Adjacent jumper; insulated; IN = IN terminal block; Nominal current 32 A Staggered jumper; insulated; from to 2; Spacing: 6 mm Staggered jumper; insulated; from to 3; Spacing: 6 mm Staggered jumper; insulated; from to 4; Spacing: 6 mm Staggered jumper; insulated; from to ; Spacing: 6 mm Staggered jumper; insulated; from to 6; Spacing: 6 mm 2 End plate End and intermediate plate; mm thick 2 3

4 Carrier rail 20-2 Steel carrier rail; 3 x 7 mm; mm thick; 2 m long; slotted; according to en 607; "Hole width 2 mm 20-3 Steel carrier rail; 3 x 7 mm; mm thick; 2 m long; unslotted; according to en Steel carrier rail; 3 x mm; mm thick; 2 m long; unslotted; according to en Steel carrier rail; 3 x 7 mm; mm thick; 2 m long; slotted; according to en 607; "Hole width 8 mm 20-8 Steel carrier rail; 3 x mm; 23 mm thick; 2 m long; unslotted; according to en Aluminum carrier rail; 3 x 82 mm; 6 mm thick; 2 m long; unslotted; according to en Steel carrier rail; 3 x mm; mm thick; 2 m long; slotted; according to en Copper carrier rail; 3 x mm; 23 mm thick; 2 m long; unslotted; according to en Steel carrier rail; 3 x 7 mm; mm thick; 2 m long; slotted; galvanized; according to EN Steel carrier rail; 3 x 7 mm; mm thick; 2 m long; unslotted; galvanized; according to EN Steel carrier rail; 3 x mm; mm thick; 2 m long; unslotted; galvanized; ähnlich EN Steel carrier rail; 3 x mm; mm thick; 2 m long; slotted; galvanized; ähnlich EN 607 4

5 Marking accessories Adapter for WFB continuous marking strip; to be snapped into marker slot WSB quick marking system; plain; for terminal block width - 7 mm; 0 strips with / WSB quick marking system; plain; for terminal block width - 7 mm; 0 strips with / WSB quick marking system; plain; for terminal block width - 7 mm; 0 strips with / WSB quick marking system; plain; for terminal block width - 7 mm; 0 strips with / WSB quick marking system; plain; for terminal block width - 7 mm; 0 strips with / WSB quick marking system; plain; for terminal block width - 7 mm; 0 strips with / WSB quick marking system; plain; for terminal block width - 7 mm; 0 strips with / WSB quick marking system; plain; for terminal block width - 7 mm; 0 strips with / WSB quick marking system; plain; for terminal block width - 7 mm; 0 strips with WCB combi marking system; plain; 20 markers each tag WMB Multi marking system; plain; for terminal block width - 7 mm; 0 strips with / WMB Multi marking system; plain; for terminal block width - 7 mm; 0 strips with / WMB Multi marking system; plain; for terminal block width - 7 mm; 0 strips with / WMB Multi marking system; plain; for terminal block width - 7 mm; 0 strips with / WMB Multi marking system; plain; for terminal block width - 7 mm; 0 strips with / WMB Multi marking system; plain; for terminal block width - 7 mm; 0 strips with / WMB Multi marking system; plain; for terminal block width - 7 mm; 0 strips with 0

6 793-0/ WMB Multi marking system; plain; for terminal block width - 7 mm; 0 strips with / WMB Multi marking system; plain; for terminal block width - 7 mm; 0 strips with WMB Multi marking system; plain; for terminal block width - 7 mm; stretchable - 2 mm; 0 strips with / WMB Multi marking system; plain; for terminal block width - 7 mm; stretchable - 2 mm; 0 strips with / WMB Multi marking system; plain; for terminal block width - 7 mm; stretchable - 2 mm; 0 strips with / WMB Multi marking system; plain; for terminal block width - 7 mm; stretchable - 2 mm; 0 strips with / WMB Multi marking system; plain; for terminal block width - 7 mm; stretchable - 2 mm; 0 strips with / WMB Multi marking system; plain; for terminal block width - 7 mm; stretchable - 2 mm; 0 strips with / WMB Multi marking system; plain; for terminal block width - 7 mm; stretchable - 2 mm; 0 strips with / WMB Multi marking system; plain; for terminal block width - 7 mm; stretchable - 2 mm; 0 strips with / WMB Multi marking system; plain; for terminal block width - 7 mm; stretchable - 2 mm; 0 strips with 0 Protective warning marker 28-4 Protective warning marker; with high-voltage symbol, black; for terminal blocks 2 N-busbar WFB continuous marking strip; 000 mm long; for self-marking; eg, with fiber-tip pen 0 6

7 General accessory Test plug adapter; 83 mm wide; for test plug 4 mm Ø; suitable for mm² - 0 mm² terminal 2 blocks Test plug; 2 mm Ø; with 00 mm cable Test plug; 23 mm Ø; with 00 mm cable Step-down test plug; from 4mm socket to 2mm plug Stickers for operating instructions; for TOPJOB disconnect terminal blocks; 777, 780 to Series Operating tool with partially insulated shaft; blade (3 x 0) mm; short; suitable for 260, 26, 262, 264, 270, 280, 28, 869, 870 and 880 Series Operating tool with partially insulated shaft; blade (3 x 0) mm; short; angled; particularly suitable for 280 Series actuator and sensor terminal blocks and also for Series 260, 26, 262, 264, 280, 28, 869, 870, 880, 2002, Operating tool with partially insulated shaft; Type 2, blade (3 x 0) mm; suitable for 260, 26, 262, 264, 270, 280, 28, 290, 77, 776, 777, 769, 780, 78, 869, 870, 880, 2002, 2003, 2004, 200 and 2022 Series Pivoting group marker carrier L-type test plug module; modular; with spring-loaded contact pin; center module L-type end module; modular; with rigid contact pin; end module L-type spacer module; modular; eg, bridging commoned terminal blocks B-type test plug module; modular; Module width 6 mm B-type spacer module; modular; eg, for bridging commoned terminal blocks; Module width 6 2 mm Test plug adapter; mm wide; for test plug (23 mm Ø); suitable for mm² mm² terminal blocks Test plug; 6 mm wide; nominal current 24 A; for 008 mm² - 2 mm² Test plug module; modular; suitable for all WAGO 28, 776, 777 and 78 series rail-mounted 2 terminal blocks with jumper slots in the current bar; suitable for all WAGO 28, 776, 777 and 78 series rail-mounted terminal blocks with jumper slots in the curr Spacer module; modular; bridging commoned terminal blocks; Module width 6 mm Busbar carrier; with end stop function and detachable separator plate; for DIN 3 rail; 8 mm 2 thick Topjob tool; specially designed blade; suitable for all TOPJOB terminal blocks 7

8 Images & drawings Address Hansastr Minden Telefon: 07/887-0 Fax: 07/ Technische Änderungen und Irrtümer vorbehalten 8

Printview: 3-conductor ground terminal block; suitable for Ex e II applications - Item No.: /

Printview: 3-conductor ground terminal block; suitable for Ex e II applications - Item No.: / Printview: 3-conductor ground terminal block; suitable for Ex e II applications - Item No: 28-687/999-90 3-conductor ground terminal block; suitable for Ex e II applications Item No: 28-687/999-90 3-conductor

More information

Distribution terminal block; 3 x CAGE CLAMP connection 10 mm²; 1 x screw-clamp connection 35 mm²

Distribution terminal block; 3 x CAGE CLAMP connection 10 mm²; 1 x screw-clamp connection 35 mm² 3 mm² - Item No: 284-62 Distribution terminal block; 3 x CAGE CLAMP connection 0 mm²; x screw-clamp connection 3 mm² Item No: 284-62 Distribution terminal block; 3 x CAGE CLAMP connection 0 mm²; x screw-clamp

More information

Printview: 2-conductor ground terminal block - Item No.:

Printview: 2-conductor ground terminal block - Item No.: 2-conductor ground terminal block Item No: 282-07 2-conductor ground terminal block Marking Business data Supplier WAGO Item no 282-07 GTIN / EAN 4044408423 Content Order amount 0 Customer item number

More information

Printview: Screwless end stop; 6 mm wide - Item No.:

Printview: Screwless end stop; 6 mm wide - Item No.: Screwless end stop; 6 mm wide Item No: 249-116 Screwless end stop; 6 mm wide Marking Business data Supplier WAGO Item no 249-116 EAN 4017332270823 Content 1 Order amount 2 Customer item number Notes Fit

More information

2-channel analog input module; Pt100 / RTD; for resistance sensors

2-channel analog input module; Pt100 / RTD; for resistance sensors Printview: 2-channel analog input module; Pt00 / RTD; for resistance sensors - Item No: 70-46 2-channel analog input module; Pt00 / RTD; for resistance sensors Item No: 70-46 2-channel analog input module;

More information

Printview: Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning option - Item No.

Printview: Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning option - Item No. Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1- pole; CAGE CLAMP ; commoning option Item No: 745-871/006-000 Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning

More information

Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / in

Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / in Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / 0.394 in Item No.: 736-704 Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / 0.394

More information

OUR POWER TEAM. High-Current DIN-Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil) vibration-proof fast maintenance-free

OUR POWER TEAM. High-Current DIN-Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil) vibration-proof fast maintenance-free OUR POWER TEAM High-Current DIN-Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil) vibration-proof fast maintenance-free BENEFITS Primary applications: Energy-intensive industries, including

More information

Our Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil)

Our Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil) Our Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (50 kcmil) vibration-proof fast maintenance-free WAGO BENEFITS Using springs instead of screws is the key to WAGO s

More information

Our Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil)

Our Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil) Our Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (50 kcmil) Vibration-Proof Fast Maintenance-Free WAGO BENEFITS The key to WAGO s success: springs, not screws. This

More information

X-COM - and X-COM S-SYSTEM Pluggable Rail-Mounted Terminal Blocks

X-COM - and X-COM S-SYSTEM Pluggable Rail-Mounted Terminal Blocks X-COM - and X-COM S-SYSTEM Pluggable Rail-Mounted Terminal Blocks 2 Contents X-COM -SYSTEM 04 Installation 07 X-COM -SYSTEM at a Glance 08 X-COM S-SYSTEM 12 Installation 14 X-COM S-SYSTEM at a Glance 16

More information

Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series

Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series 28 Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series 281... Blown fuse indication Exchange of fuse Blown fuse indication by LED or neon lamp Before exchanging the

More information

Datasheet. Approvals. Technical data. Feed-through terminal WK 4 / U BLUE /V0. General. Technical data. Connection Data

Datasheet. Approvals. Technical data. Feed-through terminal WK 4 / U BLUE /V0. General. Technical data. Connection Data Datasheet Art.No. 57.504.0055.6 Feed-through terminal WK 4 / U BLUE /V0 Feed-through DIN rail terminal block with screw connection for mounting on TS 35 and TS 32, nominal cross section 4 mm², width 6

More information

PT 2,5-TWIN/1P BU. Extract from the online catalog. Order No.:

PT 2,5-TWIN/1P BU. Extract from the online catalog. Order No.: Extract from the online catalog PT 2,5-TWIN/1P BU Order No.: 3209646 Feed-through modular terminal block, Connection method: Pushin / plug connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm,

More information

Insulated multipole operating tools for front-entry terminal blocks. 1-pole pole pole

Insulated multipole operating tools for front-entry terminal blocks. 1-pole pole pole Operating Tools Operating tool with partially insulated shaft, ideal for operating terminal blocks Insulated multipole operating tools for front-entry terminal blocks Operating tool (DIN 524), ideal for

More information

PIT 2,5-TG. Extract from the online catalog. Order No.:

PIT 2,5-TG. Extract from the online catalog. Order No.: Extract from the online catalog PIT 2,5-TG Order No.: 3210185 Disconnect terminal block, Connection type: Leg spring connection, Cross section: - 4 mm², AWG: 26-12, Nominal current: 20 A, Nominal voltage:

More information

UK 6-FSI/C. Extract from the online catalog. Order No.:

UK 6-FSI/C. Extract from the online catalog. Order No.: Extract from the online catalog UK 6-FSI/C Order No.: 3118203 Flat-type fuse terminal block, cross section: 0.2-6 mm², AWG: 26-8, width: 8.2 mm, color: black Commercial data EAN 4017918100605 Pack 50 pcs.

More information

PT 2,5-QUATTRO-PE. Extract from the online catalog. Order No.:

PT 2,5-QUATTRO-PE. Extract from the online catalog. Order No.: Extract from the online catalog PT 2,5-QUATTRO-PE Order No.: 3209594 Ground modular terminal block, Connection method: Push-in connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm, Color: green-yellow,

More information

PT 2,5-TWIN/1P BU. Extract from the online catalog. Order No.:

PT 2,5-TWIN/1P BU. Extract from the online catalog. Order No.: Extract from the online catalog PT 2,5-TWIN/1P BU Order No.: 3209646 Feed-through terminal block, Connection method: Push-in / plug connection, Cross section: 0.14 mm² - 4 mm², AWG: 26-12, Width: 5.2 mm,

More information

PT 2,5-QUATTRO/2P BU. Extract from the online catalog. Order No.:

PT 2,5-QUATTRO/2P BU. Extract from the online catalog. Order No.: Extract from the online catalog PT 2,5-QUATTRO/2P BU Order No.: 3209675 Feed-through modular terminal block, Connection method: Pushin / plug connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm,

More information

STS 2,5. Extract from the online catalog. Order No.:

STS 2,5. Extract from the online catalog. Order No.: Extract from the online catalog STS 2,5 Order No.: 3036398 Feed-through modular terminal block, Connection method: Springcage connection, Spring-cage connection, Cross section: 0.08 mm² - 4 mm², AWG 28-12,

More information

8WH2 Spring-Loaded Terminals

8WH2 Spring-Loaded Terminals 8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25

More information

UKK 5-PV. Extract from the online catalog. Order No.:

UKK 5-PV. Extract from the online catalog. Order No.: Extract from the online catalog UKK 5-PV Order No.: 2791388 Feed-through modular terminal block, Type of connection: Screw connection, Cross section: 0.2 mm² - 4 mm², AWG 24-12, Width: 6.2 mm,, Mounting

More information

8WH2 Spring-Loaded Terminals

8WH2 Spring-Loaded Terminals 8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25

More information

Terminal Blocks Product Catalog Terminal Block Supplement. Introduction. 8WH6 ipo Plug-In Terminals. 8WH6 ipo Installation Terminals

Terminal Blocks Product Catalog Terminal Block Supplement. Introduction. 8WH6 ipo Plug-In Terminals. 8WH6 ipo Installation Terminals Terminal Blocks 2013 Product Catalog Terminal Block Supplement Introduction 8WH6 ipo Plug-In Terminals 8WH6 ipo Installation Terminals 8WH2 Spring-Loaded Terminals 1 2 3 4 8WH 8WH5 Combination Plug-In

More information

Viking 3 - Screw connection Disconnect terminal blocks

Viking 3 - Screw connection Disconnect terminal blocks 87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Viking 3 - Screw connection 1. General features... 1 2. Range...2 3. Standards... 2 4. Technical features... 3 5. Dimensions...

More information

Approvals (p. 906) 0 371 61 0 371 63 0 371 64 0 371 66 0 371 69 0 371 68 0 371 00 0 371 08 0 371 20 Connecting (p. 300) 1 connection - 1 entry/1 outlet ELECTRICAL FUNCTION TERMINAL BLOCKS INSULATION EQUIPOTENTIAL

More information

Series 858, Relay Sockets with Industrial Relay

Series 858, Relay Sockets with Industrial Relay Series 858, Relay Sockets with Industrial Relay voltage: V DC 4 changeover contacts voltage: V DC 4 changeover contacts (gold contacts) * In order to prevent the gold layer from being damaged, these values

More information

Thermal-Magnetic Circuit Breaker 201/-WA

Thermal-Magnetic Circuit Breaker 201/-WA Thermal-Magnetic Circuit Breaker 0/-WA Description Single pole thermal-magnetic circuit breaker with tease-free, trip-free, snap action mechanism and two button operation (M-type TM CBE to EN 60934). Featuring

More information

55 Series - Miniature General Purpose Relays 5-10 A

55 Series - Miniature General Purpose Relays 5-10 A Series - Miniature General Purpose Relays -0 A - Plug-in or P.C.B. versions - AC or DC coils - Lockable test button and mechanical flag indicator as standard on and CO relays types - Sockets and accessories:

More information

Han ES Press. Features. Description. Removal of conductor. Size 6 B - 24 B

Han ES Press. Features. Description. Removal of conductor. Size 6 B - 24 B Size 6 B - 24 B Features Easy bridging functionality of contacts by means of plug-in jumpers directly on the connector Fast realisation of potential multiplication as well as star and delta bridges Rapid

More information

IEC TERMINAL BLOCKS. Screw Clamp Connection. Feed Through DIN Rail 433. Ground DIN Rail 439. Fuse Holder DIN Rail 445. Disconnect DIN Rail 448

IEC TERMINAL BLOCKS. Screw Clamp Connection. Feed Through DIN Rail 433. Ground DIN Rail 439. Fuse Holder DIN Rail 445. Disconnect DIN Rail 448 CONTROL LOGIC IEC TERMINAL BLOCKS TB c3controls line of IEC terminal blocks are both innovative and user-friendly. They are simple to install and are color-coded for easy circuit identification. From standard

More information

Operating Tools Test and Measurement Tools

Operating Tools Test and Measurement Tools Operating Tools Test and Measurement Tools Operating tool for TOPJOB S installation terminal blocks Voltage testers Profi LCD+ Profi LED+ Multi-Tester digital multimeter Amp-Tester clamp meter 6 191 Item

More information

BETA Switching Switches and Light Indicators

BETA Switching Switches and Light Indicators Siemens AG 2008 BETA Switching /2 Product overview /3 5TE8 control switches / 5TE4 pushbuttons /2 5TE5 light indicators /5 5TE8 ON/OFF switches /22 5TE9 busbars /24 5TE switch disconnectors Siemens ET

More information

ST-COMBI 4 mm 2 Pluggable Spring-Cage Terminal Blocks

ST-COMBI 4 mm 2 Pluggable Spring-Cage Terminal Blocks ST-COMBI 4 mm 2 Pluggable Spring-Cage Terminal Blocks The Þelds of application for the pluggable ST-COMBI spring-cage terminal blocks has been added to with solutions for larger conductor cross sections

More information

ST 4-HESI (5X20) Extract from the online catalog. Order No.: Fuse terminal block for assembly on NS 35, for 5 x 20 cartridge fuse inserts

ST 4-HESI (5X20) Extract from the online catalog. Order No.: Fuse terminal block for assembly on NS 35, for 5 x 20 cartridge fuse inserts Extract from the online catalog ST 4-HESI (5X20) Order No.: 3036369 Fuse terminal block for assembly on NS 35, for 5 x 20 cartridge fuse inserts Commercial data EAN 4017918890476 Pack 50 pcs. Customs tariff

More information

MK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG AWG AWG Rated surge voltage / pollution severity

MK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG AWG AWG Rated surge voltage / pollution severity or direct mounting Screw connection MK 2/12 2.5 mm 2 MK 3/2... 12 2.5 mm 2 Width x height / ø fixing hole mm 15.0 x 15.0 / 3.20 15.0 x 16.1 / 3.45 (length and mounting size: see order data) Max. clamping

More information

Electronic Circuit Breaker ESS20-0..

Electronic Circuit Breaker ESS20-0.. Electronic Circuit Breaker ES-0.. Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode

More information

8WH6 ipo Plug-In Terminals

8WH6 ipo Plug-In Terminals / Introduction /3 /4 8WH6 through-type terminals /8 8WH6 fuse terminals /9 8WH6 isolating blade terminals /11 8WH6 isolating terminals /13 8WH6 two-tier terminals More technical product information: Service&Support

More information

2 pole 10 A PCB mount A1 A

2 pole 10 A PCB mount A1 A Series - Miniature general purpose relays - 0 A Features Printed circuit mount, general purpose, & Pole relays. - Pole 0 A. - Pole 0 A. - Pole A AC coils & DC coils Cadmium Free contacts (preferred version)

More information

selos Wieland jumpering system Perfect technology Copper Steel Wieland marking system Reliable identification Perfect technology Extremely rugged!

selos Wieland jumpering system Perfect technology Copper Steel Wieland marking system Reliable identification Perfect technology Extremely rugged! selos Wieland jumpering system Perfect technology Steel Copper Perfect technology Copper current bar guarantees low contact resistance Steel spring guarantees strength, durability, and long-term stability

More information

fasis WTP DIN rail terminal blocks with push-in connection

fasis WTP DIN rail terminal blocks with push-in connection 110 fasis fasis WTP DIN rail terminal blocks with push-in connection Terminate wires easily, directly and without tools! fasis WTP DIN rail terminal blocks with push-in connection. Built according to an

More information

5 mm contact pin pitch PCB or 95 series sockets

5 mm contact pin pitch PCB or 95 series sockets 1. = 12.4 1. = 12.4 44 Series - Miniature PCB relays 6-10 A Features 44.2 44.62 2 Pole relay range 44.2-2 Pole 6 A ( mm pin pitch) 44.62-2 Pole 10 A ( mm pin pitch) PCB mount - direct or via PCB socket

More information

onlinecomponents.com

onlinecomponents.com s ST Spring cage fuse terminal blocks from Phoenix Contact satisfy two important tasks of electrical connection systems. Firstly, they act as carriers for fuses and secondly, they assume the task of potential

More information

RX 3 MCB 4500 A Phase + Neutral, neutral on left side

RX 3 MCB 4500 A Phase + Neutral, neutral on left side 87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 RX 3 MCB 4500 A CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...

More information

Power distribution systems - accessories

Power distribution systems - accessories Connections and terminals Line terminal X 221 3 01 Power-D-Box with sockets pre-wired Line terminal (max. 63 A) X 221 3 01 14.551 max. tightening torque 3.0 Nm 15.591 busbar X1, X2 blade terminals 6.3

More information

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 55 Series - General purpose relays 7-10 A 55 Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils

More information

Terminal blocks with Push In connection technology. Product Information

Terminal blocks with Push In connection technology. Product Information Terminal blocks with Push In connection technology Product Information Overview Terminal blocks with Push In connection technology (P-Series) Less is more With the P-Series, Weidmuller is presenting a

More information

CO (DPDT) 16/25 250/ /440 2,000 4, /0.5/ /0.5/ (5/5) 300 (5/5) AgNi

CO (DPDT) 16/25 250/ /440 2,000 4, /0.5/ /0.5/ (5/5) 300 (5/5) AgNi 46 Series - Miniature industrial relays 8-16 A Features 46.52 46.61 1 & 2 Pole relay range 46.52-2 Pole 8 A 46.61-1 Pole 16 A Socket mount or direct connection via Faston connectors AC coils & DC coils

More information

Data sheet TERMSERIES TRZ 120VUC 1CO

Data sheet TERMSERIES TRZ 120VUC 1CO relay module, complete modules consisting of a relay and a base with AC/DC/UC coils, available in different versions: With screw and tension-clamp connection AgNi contact, optionally with hard gold-plated

More information

MK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG Rated surge voltage / pollution severity AWG 24..

MK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG Rated surge voltage / pollution severity AWG 24.. or direct mounting Screw connection MK 2/12 2.5 mm 2 MK 3/2... 12 2.5 mm 2 Width x height / ø fixing hole mm 15.0 x 15.0 / 3.20 15.0 x 16.1 / 3.45 (length and mounting size: see order data) Max. clamping

More information

Data sheet... W-Series WPE 4

Data sheet... W-Series WPE 4 The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² WPE 4N). General ordering data Order No. 1010100000

More information

DOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD

DOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD DOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD PRODUCT INFORMATION Double-level terminal blocks SRKD SSLD CONTA-CLIP offers an innovative line of double-level feed-through terminals SRKD and protective-earth terminals

More information

Extra functions. Phone: Fax: Web: Accessories P-Series. Terminals, P-Series

Extra functions. Phone: Fax: Web: Accessories P-Series. Terminals, P-Series Accessories P-Series Terminals, P-Series Extra functions B Introduction The accessories for our other ranges of modular terminals can also be used with the P-Series in order to reduce the number of variations.

More information

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2 way angle seat globe valve has a low maintenance aluminium piston actuator. The valve spindle is sealed by a selfadjusting

More information

SCREW-TYPE DISTRIBUTION BLOCKS

SCREW-TYPE DISTRIBUTION BLOCKS SCREW-TYPE DISTRIBUTION BLOCKS PRODUCT INFORMATION CONTA-CONNECT Screw-distributor blocks SVB The SVB screw-type distributor block makes it possible to distribute potential and power in a compact space

More information

94 Series - Socket overview for 55 series relays

94 Series - Socket overview for 55 series relays 94 Series - Socket overview for 55 series relays 94.04 See page 7 Module Socket Relay Description Mounting 99.02 94.02 55.32 Screw terminal (Box clamp) socket Panel or 35 mm rail - Coil indication and

More information

125 to 4000 A. Functions. Conformity to standards. Approvals and certifications (1) General characteristics. Available on request

125 to 4000 A. Functions. Conformity to standards. Approvals and certifications (1) General characteristics. Available on request 125 to 4000 A sirco_353_a_1_cat sirco_296_a_1_cat sirco_300_b switches are manually operated or motorised multipolar load break switches. They break on and off under load and provide safety isolation for

More information

Terminal blocks. J - Accessories. Summary. 1. Mounting rails End stops Circuit separators, seperator end sections...

Terminal blocks. J - Accessories. Summary. 1. Mounting rails End stops Circuit separators, seperator end sections... 160T001 060220 Terminal blocks - Accessories Summary 1. Mounting rails... 506 2. End stops... 508 3. Circuit separators, seperator end sections... 512 4. umper bars Screw clamp jumper bars... 514 Screwless

More information

Phase + Neutral, neutral on right side

Phase + Neutral, neutral on right side 87045 LIMOGES Cedex Telephone number: +33 5 55 06 87 87 Fax: +33 5 55 06 88 88 DX 3 MCB 6000 A / 10 ka Cat.. N (s): 4 074 67 / 68 / 69 / 70 / 71 / 72 / 73 / 74 / 75 / 76 / 77 / 78 / 79 ; 4 077 33 / 34

More information

SCREW-TYPE DISTRIBUTION BLOCKS

SCREW-TYPE DISTRIBUTION BLOCKS CONTA-CONNECT SCREW-TYPE DISTRIBUTION BLOCKS Our ideas Your advantages CONTA-CONNECT Screw-distributor blocks SVB The SVB screw-type distributor block makes it possible to distribute potential and power

More information

Directory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H

Directory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H Directory chapter 03 () Types H, H 3, MH 24 + 7, MH 21 + 5 Page Technical characteristics type H.................................... 03.10 Type H connectors.................... 03.11 Type H 3 connectors..................

More information

Data sheet... W terminal earth terminal WPE 4

Data sheet... W terminal earth terminal WPE 4 The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² N). General ordering data Order No. 1010100000 Type

More information

LK Position Switches TECHNICAL DATASHEET.

LK Position Switches TECHNICAL DATASHEET. LK Position Switches Technopolymer housing, one conduit entry Protection degree IP6 according to EN 60529 contact blocks available 46 actuators available Versions with stainless steel external parts Versions

More information

Terminal blocks with clamping yoke and screw connection system

Terminal blocks with clamping yoke and screw connection system Overview W-Series Terminal blocks with clamping yoke and screw connection system High contact reliability for all standard electrical functions For a long time now, Weidmüller s W-Series terminal with

More information

2 pole, 10 A AC/DC supply non polarized Plug-in for use with 94 series sockets

2 pole, 10 A AC/DC supply non polarized Plug-in for use with 94 series sockets Miniature plug-in timers 7-10 A Plug-in timer.02-2 Pole 10 A.03-3 Pole 10 A.04-4 Pole 7 A Multifunctions Seven time scales, from 0.05 s to 100 h 94 series sockets for 35 mm rail (EN 60715) mount with push-in

More information

40 Series - Miniature PCB relays A. Features

40 Series - Miniature PCB relays A. Features 1. = 12.4 1. = 12.4 1. = 12.4 40 Series - Miniature PCB relays 8-10 - 16 A Features 40.31 40.1 40.2 1 & 2 Pole relay range 40.31-1 Pole 10 A (3. mm pin pitch) 40.1-1 Pole 10 A ( mm pin pitch) 40.2-2 Pole

More information

INNOVATION IS OUR POWER.

INNOVATION IS OUR POWER. MANUAL 2019 EN INNOVATION IS OUR POWER. Wöhner develops system solutions for the electro-technical market. For over 90 years, the Wöhner name has been synonymous with impressive technical achievements

More information

Siemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage

Siemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage SENTRON Configuration Manual Edition 10/2015 siemens.com/lowvoltage 2 Introduction LD main control and EMERGENCY-STOP switches up to 250 A 4 Introduction 7 Front mounting 10 Floor mounting 11 Distribution

More information

Electronic Circuit Breaker ESS20

Electronic Circuit Breaker ESS20 Electronic Circuit Breaker ESS20 Description Electronic circuit breaker type ESS20 is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 24 V switch-mode

More information

SCREW CONNECTION TERMINAL BLOCKS

SCREW CONNECTION TERMINAL BLOCKS Terminal, IEC Catalogs > Industrial Controls Catalog > Terminal and Wiring Systems > Terminal, IEC > Screw Connection Terminal SCREW CONNECTION TERMINAL BLOCKS Introduction Sensor Thermocouple Mini- Grounding

More information

Stud terminals. Overview Stud terminals WF / WFF. Stud terminals

Stud terminals. Overview Stud terminals WF / WFF. Stud terminals Overview WF / WFF Power transmission Weidmüller s extensive range of stud terminals offers secure connections for all applications which entail a transmission of energy. The connection range extends from

More information

MANUAL 2018 AL 2018 U AN M

MANUAL 2018 AL 2018 U AN M MANUAL 2018 DEVELOPED IN RÖDENTAL, SUCCESSFUL WORLDWIDE Wöhner develops system solutions for the electro-technical market. For over 88 years, the Wöhner name has been synonymous with impressive technical

More information

BRACKETS, MOUNTS & HARDWARE

BRACKETS, MOUNTS & HARDWARE HIGH VOLTAGE SWITCHGEAR & AUTOMATION EQUIPMENT SECTION 6 Brackets, Mounts & Misc. Hardware CAT. NO: 040930G May, 2008 INERTIA Engineering & Machine Works, INC. Fax: (209) 931-8186 6665 Hardaway Road, Stockton,

More information

CT - CTS inserts with incorporated terminal block for multipole connectors (10A max versions)

CT - CTS inserts with incorporated terminal block for multipole connectors (10A max versions) inserts with incorporated terminal block for multipole connectors (A max versions) Use The CT-series multipole connectors (with incorporated terminal block) are recommended for greater cost-saving and

More information

Cabling Instructions NOνA Project Written By: Dale Mudd September 21 st, 2010

Cabling Instructions NOνA Project Written By: Dale Mudd September 21 st, 2010 Cabling Instructions NOνA Project Written By: Dale Mudd September 21 st, 2010 P#= Part Number NOTE: Specific crimp tools located at end FEB/TEC Lower Voltage Cables Bottom of SB120 to Bottom of 60A Breaker:

More information

Datasheet. W-series terminal with clamping yoke connection WSI 6

Datasheet. W-series terminal with clamping yoke connection WSI 6 The fuse terminals of the Weidmüller W Series are available in two different forms: Fuse terminal with pivoting retaining lever Fuse terminal with plug-in SIHA fuse holder General ordering data Order No.

More information

30Compact 200 A / 360 A

30Compact 200 A / 360 A 200 A / 360 A 2 BUSBAR SYSTEM TECHNOLOGY 200 A / 360 A 2 Compact busbar system for control systems and power distribution up to 360 A The busbar system is the ideal solution for distribution boards with

More information

, , PREPARATION - CONNECTION. Mounting:. On symmetrical EN rail or DIN 35 rail

, , PREPARATION - CONNECTION. Mounting:. On symmetrical EN rail or DIN 35 rail 87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX 3 4500 A / 6 ka CONTENTS PAGES 1. Description, use...1 2. Range...1 3. Overall dimensions...1 4. Preparation - Connection...1

More information

LB - LIGHTING BUSWAY 25-40A

LB - LIGHTING BUSWAY 25-40A 16 LB - LIGHTING BUSWAY 25-40A LIGHTING BUSWAY SECTION CONTENTS 18 General features 24 Trunking components: 2 and 4 conductors elements 28 Trunking components: 6 conductors elements 30 Plugs 33 Fixing

More information

MR - MEDIUM RATING A

MR - MEDIUM RATING A 88 MR - MEDIUM RATING 160-1000A SECTION CONTENTS 90 General features 96 Advantages 100 Illustrated contents MR MEDIUM RATING 102 Trunking components 110 Feed units and end covers 113 Tap-off boxes 118

More information

Switchgear Skid, C1192

Switchgear Skid, C1192 CUSTOM SOLUTIONS 15kV Modular Stairs stored on floor in front of battery bay Ground grid stored on front tongue of trailer Stairs deployed for unit access Storage box for fencing materials and other parts

More information

XB IEC Terminal Blocks. Screw Type Insulation Displacement Connection Type

XB IEC Terminal Blocks. Screw Type Insulation Displacement Connection Type XB IEC Terminal Blocks Screw Type Spring Cage Type Insulation Displacement Connection Type 2 XB IEC Terminal Blocks. Versatility, quality, and reliability. Sometimes it s the little things Eaton knows

More information

Main catalogue. SNK Series Terminal Blocks Accessories Marking Solutions

Main catalogue. SNK Series Terminal Blocks Accessories Marking Solutions Main catalogue SNK Series Terminal Blocks Accessories Marking Solutions Summary See page 7 1SNK161026S0201 SNK Series, Terminal Blocks Screw clamp terminal blocks Accessories Marking solutions 1 A Smart

More information

BLOCK CATALOG SUPPLEMENT LOREM IPSUM DELORE LOREM IPSUM DELORE LOREM IPSUM

BLOCK CATALOG SUPPLEMENT LOREM IPSUM DELORE LOREM IPSUM DELORE LOREM IPSUM TERMINAL BLOCK CATALOG SUPPLEMENT To be used in conjunction with c3controls Edition 20-105 full line catalog. TERMINAL BLOCK CATALOG SUPPLEMENT LOREM IPSUM DELORE LOREM IPSUM DELORE LOREM IPSUM New and

More information

Altech UL1077/508 Busbar System

Altech UL1077/508 Busbar System Altech UL1077/508 Busbar System UL1077/508 Listed Busbars The Altech Busbar System is an innovative way to jumper up to 57 poles of Manual Motor Controllers (MMC) and Supplementary Protectors (SP). The

More information

Datasheet. W-series terminal with clamping yoke connection WDU 4

Datasheet. W-series terminal with clamping yoke connection WDU 4 The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality

More information

44 SERIES. PCB/Plug-in relays from 6 to 10 A

44 SERIES. PCB/Plug-in relays from 6 to 10 A 44 PCB/Plug-in relays from 6 to 10 44 2 CO power relays with high separation between adjacent contacts Direct PCB or socket mount Type 44.52 -- 2 CO 6 (5 mm pin pitch) Type -- 2 CO 10 (5 mm pin pitch)

More information

New VikingTM 3, the innovation

New VikingTM 3, the innovation New VikingTM 3, the innovation Screw or automatic spring connection A new range, born of research & EXPERIENCE INDEX Screw connection... 2 Automatic spring connection... 4 Common accessories... 6 Selection

More information

Time scale: from 0.05s to 100h Multi-function Plug-in for use with 90.02, 90.03, and sockets

Time scale: from 0.05s to 100h Multi-function Plug-in for use with 90.02, 90.03, and sockets 86 Series - Timer modules Features 86.00 86.30 Timer modules for use in conjunction with relay & socket. 86.00 - Multi-function & multi-voltage timer module 86.30 - Bi-function & multi-voltage timer module

More information

90 Series - Socket overview for 60 series relays

90 Series - Socket overview for 60 series relays 90 Series - Socket overview for 0 series relays See page 90 90.0 99.0 90.0 0. Screw terminal (Box clamp) socket Panel or mm rail - Coil indication and EMC 90.0 0. Double terminal (EN 00) mount suppression

More information

8WH6 ipo Installation Terminals

8WH6 ipo Installation Terminals /2 Introduction /4 8WH through-type terminals /6 8WH through-type screw terminals /8 8WH N-conductor isolating terminals /10 8WH N-conductor isolating screw terminals /12 8WH installation terminals More

More information

SMD TERMINAL BLOCKS. Small is Big!

SMD TERMINAL BLOCKS. Small is Big! SMD TERMINAL BLOCKS Small is Big! SMD TERMINAL BLOCKS A compact and low-profile PCB connection is required to achieve the most uniform light distribution, while minimizing shadowing. WAGO s surface-mount

More information

Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35

Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35 General ordering data Order No. 1608570000 Part designation 2.5/4AN Version EAN 4008190077136 Qty. 100 pc(s). Feed-through terminal,, Tension clamp connection, Wemid, Product notes Product description

More information

General purpose relays 7-10 A

General purpose relays 7-10 A 55 SЕRIES General purpose relays 7-10 utomation for blinds, grilles and shutters Control and management of electric power Shipyards Road / tunnel lighting Hoists and cranes Circuit breakers and switches

More information

Terminal Blocks. Section 12. Control Catalog 12-1

Terminal Blocks. Section 12.  Control Catalog 12-1 CR151K Resilient Modular Terminal Blocks CR151C (top) and CR151A Modular Terminal Blocks DIN-rail Mounted Terminal Blocks (CR151K)...12-2 Product Tables...12-3, 12-4 Accessories...12-3, 12-4 Technical

More information

Circuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases

Circuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases Index Page Circuit-Breakers M4 166 for motor protection Auxiliary contacts 167 Signalling switch Auxiliary releases Insulated 3-pole busbar system 168 Terminal block DIN-rail adapters 169 Busbar adapters

More information

Recommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications.

Recommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications. Metal-Enclosed Limit Switches ENM2 Recommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications. Product advantages Standard switch

More information

SURFACE TRACK (120/250V) SPECIFICATIONS

SURFACE TRACK (120/250V) SPECIFICATIONS SURFACE TRACK (120/250V) SPECIFICATIONS GENERAL Lighting Track shall allow fixtures to be located anywhere along the track length. Fixtures shall be easily focused, switched, dimmed, accessorized and removed

More information

SERIES SUBSUBMINIATURE SNAP-ACTION SWITCHES IP 67

SERIES SUBSUBMINIATURE SNAP-ACTION SWITCHES IP 67 SERIES 10 - SUBSUBMINIATURE SNAP-ACTION SWITCHES IP 67 PRODUCT FEATURES Compact design with dust and water protected switching system acc. to IP 67 (basic types 10 / 10) Large overtravel of 1.2 mm for

More information