Bulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks

Size: px

Start display at page:

Download "Bulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks"

Elmer Evans
5 years ago
Views:

Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven

Screw type blocks can often accept up to five solid or stranded wires per terminal. They also typically provide the best visual indication of the wire connection.

1 Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven method of wire connection. Their greatest advantage is the ability to land multiple wires to a single terminal, potentially saving panel space. Screw type blocks can often accept up to five solid or stranded wires per terminal. They also typically provide the best visual indication of the wire connection. Compared to screw type terminations, spring clamp terminations can be a significantly faster method of connection and can often reduce wire connection time by %. Because the wire is under constant tension from the spring clamp, spring type terminations also produce very favorable results in high vibration applications. Certifications UR, CSA UR, CSA Standards Compliance Product Types Product Selection IEC, CE Mini blocks Feed-through blocks Multi-conductor blocks Plug-in style blocks Grounding blocks Fuse blocks Two level terminal blocks Three-Level Sensor blocks Electrical Component blocks Isolation blocks IEC, CE Mini blocks Fuse blocks Feed-through blocks Grounding blocks Multi-circuit blocks Plug-in style blocks Isolation blocks Sensor blocks Electrical component blocks Page - Page - Certifications Allen-Bradley terminal blocks generally have been designed to meet the requirements of one or more regulatory bodies. Most products have also been tested per additional standards. The following is a listing of some of the regulatory bodies and standards which apply to Allen-Bradley terminal block products. See the particular product description for information on specific certifications and ratings. (Underwriters Laboratories) Devices in this catalog with one of these ratings have been tested by Underwriters Laboratories and meet the requirements of one or more of the following United States Standards: UL Grounding and Bonding Equipment UL E Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors UL Standard for Terminal Blocks Reference UL files E, E, E (Underwriters Laboratories) Devices in this catalog with this rating have been tested by Underwriters Laboratories and meet the requirements of the following Canadian Standard: CSA. No. Terminal Blocks Reference UL file E (Canadian Standards Association) Devices in this catalog with this rating have been tested by the Canadian Standards Association and meet the requirements of the following Canadian Standard: CSA. No. Terminal Blocks Reference CSA files LR Terminal blocks listed in this catalog meet the requirements of the Low Voltage Directive put forth by the European Union. Devices have been tested and comply with one or more of the following European Norms: EN - Low Voltage Switchgear and Controlgear: General Rules EN -- Low Voltage Switchgear and Controlgear: Terminal Blocks for Copper Conductors EN -- Low Voltage Switchgear and Controlgear: Protective Conductor Terminal Blocks for Copper Conductors EN -- Low Voltage Switchgear and Controlgear: Safety Requirements for Fuse Terminal Blocks ATEX Devices listed in this catalog with ATEX ratings meet the following European Norms per DEMKO or KEMA, Approval Certification Bodies for the European Union: EN - Electrical Apparatus for Potentially Explosive Atmospheres General Requirements EN - Electrical Apparatus for Potentially Explosive Atmospheres Increased Safety e Contact your local Rockwell Automation sales office or Allen- Bradley distributor for a copy of the certificate. Publication A-CAA-EN-P -

2 Bulletin Screw Connection Terminal Blocks Certifications/Introduction Ex e II Many -J, -K, -L, and -W terminal blocks in this catalog meet the following Canadian Standards per Underwriters Laboratories: CAN/CSA E - Electrical Apparatus for Explosive Atmospheres Part General Requirements CAN/CSA E - Electrical Apparatus for Explosive Atmospheres Part Increased Safety e These products are suitable for Class I, Zone Hazardous Locations. Reference UL file E. Contact your local Allen-Bradley distributor for more information. AEx e II Devices listed in this catalog with an AEx e II rating meet the following United States Standard per Underwriters Laboratories: ANSI/UL - and - Standard for Electrical Equipment for Use in Class I, Zone,, and Hazardous (Classified) Locations These products are suitable for Class I, Zone Hazardous Locations. Reference UL file E. Contact your local Rockwell Automation sales office or Allen-Bradley distributor for more information. Lloyd s Register Many -H, -J, -L, and -W terminal blocks in this catalog have been certified for use in marine, offshore, and industrial installations per the following standard: Lloyd s Register Test Specification No. : Contact your local Rockwell Automation sales office or Allen-Bradley distributor for a copy of the certificate. The Allen-Bradley Line of IEC Terminal Blocks International Products for a Worldwide Marketplace The Allen-Bradley Bulletin -J line of internationally approved IEC style terminal blocks offers a wide range of features and benefits ideally suited for many industrial applications. The -J line has been designed to meet the tough requirements of almost every industrial application. Functional, internationally approved, finger-safe, and cost-effective the Allen-Bradley Bulletin -J line. Products Available in the Bulletin Screw Terminal Block Line Our family of IEC terminal blocks consists of many different types of blocks, from general feed-through terminal blocks for control wiring to specialty blocks for grounding and isolating. We even offer thermocouple terminal blocks, specifically designed for temperature-dependent process control applications. Products offered within the Bulletin Screw Terminal Block line include: Feed-Through Blocks, capable of accommodating # / AWG (. mm) wire Grounding Blocks for grounding a given circuit to the DIN Rail Mini Blocks for applications where panel space is at a premium Two-Level Blocks that double circuit wiring density Multi-Conductor Blocks that allow splitting or joining of control circuits Three-Level Sensor Blocks for coordination of three-wire sensor groups Isolation Blocks for circuit isolation during testing and troubleshooting Fuse Blocks, with and without blown fuse indication, for easily integrated overcurrent protection Electrical Component Blocks that allow the insertion of fixed components into control circuits. Available components include resistors, diodes, surge suppression circuits, and shunt bars. - Publication A-CAA-EN-P

3 Bulletin Screw Connection Terminal Blocks Standard Feed-Through Blocks Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.." (. mm) -J -J -J." ( mm)." (. mm)." ( mm)." (. mm)." (. mm)." ( mm) Feed-through terminal block Feed-through terminal block Feed-through terminal block Certifications CSA IEC ATEX CSA IEC ATEX CSA IEC ATEX V V V V V V V V V Maximum Current A A A A A A A A A A A Wire Range (Rated Cross Section). mm mm mm # # AWG AWG. mm # # (# mm (# # AWG mm (# AWG AWG AWG) AWG) AWG) Wire Strip Length. in. ( mm). in. ( mm). in. ( mm) Recommended Tightening Torque.. lb in (.. N m). lb in (. N m). lb in (. N m) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range - + F (- + C) - + F (- + C) - + F (- + C) Short-Circuit Current Rating See page - Terminal Blocks Pkg Qty. Pkg Qty. Pkg Qty. Color: Grey -J -J -J Red -J-RE -J-RE -J-RE Blue -J-B -J-B -J-B Black -J-BL -J-BL -J-BL Green -J-G -J-G -J-G -J-Y -J-Y -J-Y Orange -J-OR -J-OR -J-OR Brown -J-BR -J-BR -J-BR White -J-W -J-W -J-W Violet -J-V -J-V Mounting Rails: m Symmetrical DIN (Steel) -DR -DR -DR m Symmetrical DIN (Aluminum) -DR -DR -DR m Hi-Rise Sym. DIN (Aluminum) -DR -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR -DR -DR End Barriers Grey -EBJ -EBJ -EBJ Blue -EBJ-B -EBJ-B -EBJ-B -EBJ-Y -EBJ-Y -EBJ-Y End Anchors and Retainers: DIN Rail Normal Duty -EAJ -EAJ -EAJ DIN Rail Heavy Duty -EAHJ -EAHJ -EAHJ -ERL -ERL -ERL : Screw Center Jumper -pole -CJJ- -CJJ- -CJJ- Screw Center Jumper -pole -CJJ- -CJJ- -CJJ- Screw Center Jumper -pole -CJJ- -CJJ- -CJJ- Screw Center Jumper -pole -CJJ- -CJJ- -CJJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- (-pole) Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Insulated Side Jumper -Pole -SJB- Insulated Side Jumper -Pole -SJB- Screw Type Jumper Notching Tool -T -T -T Other Accessories: Partition Plate -EBJ -EBJ -EBJ Test Plug Socket -TPS -TPSL -TPSL Test Plug -TP -TP -TP Test Plug (Stackable) -TPJ -TPJ Electrical Warning Plate -EWPJ -EWPJ -EWPJ Marking Systems: Snap-in Marker Cards." (. mm) -MX (/card) -MX (/card) -MRX (/card) -MX (/card) -MX (/card) -MX (/card) Use of center jumpers may affect spacings, requiring derating of terminal blocks. See page - for details. - Publication A-CAA-EN-P

Bulletin Screw Connection Terminal Blocks Specialty Feed-Through Blocks." (. mm) -JQ -JTW -JTW Dimensions are not intended to be used for manufacturing purposes.

4 Bulletin Screw Connection Terminal Blocks Specialty Feed-Through Blocks." (. mm) -JQ -JTW -JTW Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.." (. mm)." ( mm)." ( mm)." ( mm) Feed-through terminal block with Feed-through terminal block with connection Feed-through terminal block with connection points on each side points, on one side connection points, on one side Certifications CSA IEC CSA IEC ATEX CSA IEC V V V V V V V Maximum Current A A. A A A Maximum Single Side A A. A A Current Twin Side A A A Wire Range (Rated Cross Section) Single Side # AWG # AWG Twin Side." (. mm). mm # AWG # AWG AWG AWG. mm. mm. mm (# AWG). mm (# AWG)." ( mm) # AWG Wire Strip Length. in. ( mm) Single Side:. in. ( mm) Twin Side:. in. ( mm). in. ( mm) Recommended Tightening Torque. lb in (. N m) Single Side:. lb in (. N m) Twin Side:. lb in (. N m). lb in (. N m) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Insulation Temperature Temperature Range Range - + F (- + C) - + F (- + C) - + F (- + C) Short-Circuit Current Rating See page - Terminal Blocks Terminal Blocks Pkg Qty. Pkg Qty. Pkg Qty. Color: Grey -JQ -JTW -JTW Red -JQ-RE -JTW-RE Blue -JQ-B -JTW-B Black -JQ-BL -JTW-BL Green -JQ-G -JTW-G -JQ-Y -JTW-Y Orange -JQ-OR -JTW-OR Brown -JQ-BR -JTW-BR White -JQ-W -JTW-W Accessories Pkg Qty. Pkg Qty. Pkg Qty. Mounting Rails: m Symmetrical DIN (Steel) -DR -DR -DR m Symmetrical DIN (Aluminum) -DR -DR -DR m Hi-Rise Sym. DIN (Aluminum) -DR -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR -DR -DR End Barriers Grey -EBJ -EBJ -EBJTW Blue -EBJ-B -EBJ-B -EBJ-Y -EBJ-Y -EBJTW-Y End Anchors and Retainers: -ERL -ERL -ERL DIN Rail Normal Duty -EAJ -EAJ -EAJ DIN Rail Heavy Duty -EAH -EAH -EAH : Screw Center Jumper -pole -CJJ- -CJJ- Screw Center Jumper -pole -CJJ- -CJJ- Screw Center Jumper -pole -CJJ- -CJJ- Screw Center Jumper -pole -CJJ- -CJJ- Plug-in Center Jumper -Pole (- JTW)/ -Pole (-JTW) -CJLJ- -CJLJ- Plug-in Center Jumper -, -, -, -, -, -Pole -CJLJ-, -, -, -, -, - mm -CJLJ- Plug-in Center Jumper -, -, -Pole -CJLJ-, -, - -CJLJ-, -, - Insulated Side Jumper -Pole -SJB- -SJB- Insulated Side Jumper -Pole -SJB- -SJB- Screw Type Jumper Notching Tool -T -T Other Accessories: Partition Plate -EBJ -EBJ Test Plug Socket -TPSL -TPSL -TPSL Test Plug -TP -TP -TP Test Plug (Stackable) -TPJ -TPJ Marking Systems: Snap-in marker card Use of center jumpers may affect spacings, requiring derating of terminal blocks. -MX (/card) -MX (/card) -MRX (/card) -MX (/card) -MX (/card) -MX (/card) - Publication A-CAA-EN-P

5 Bulletin Screw Connection Terminal Blocks Isolation Blocks Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.." ( mm) -JKD -JKDTP -JKD." ( mm) Feed through terminal block with knife disconnect." ( mm)." ( mm) Feed-through terminal block with knife disconnect and test screws Feed-through terminal block with knife disconnect Certifications CSA IEC CSA IEC CSA IEC V V V V V V V Maximum Current A A A A A A A Wire Range (Rated Cross Section) # AWG. mm # AWG. mm # AWG.. mm Fuse Size (Dummy Fuse Supplied) Wire Strip Length. in. ( mm). in. ( mm). in. ( mm) Recommended Tightening Torque. lb in. (. N m). lb in. (. N m). lb in. (. N m) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range + F ( + C) + F ( + C) + F ( + C) Short-Circuit Current Rating See page - Terminal Blocks Pkg Qty. Pkg Qty. Pkg Qty. Color: Grey -JKD -JKDTP -JKD Blue -JKD-B -JKD-B with Test Points Grey -JKDTP Accessories Pkg Qty. Pkg Qty. Pkg Qty. Mounting Rails: m Symmetrical DIN (Steel) -DR -DR -DR m Symmetrical DIN (Aluminum) -DR -DR -DR m Hi-Rise Sym. DIN (Aluminum) -DR -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR -DR -DR End Barriers Grey -EBJ -EBJ -EBJ -EBJ-Y End Anchors: -ERL -ERL -ERL DIN Rail Normal Duty -EAJ -EAJ -EAJ DIN Rail Heavy Duty -EAHJ -EAHJ -EAHJ : Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- -CJLJ- Insulated Side Jumper -Pole -SJB- -SJB- Insulated Side Jumper -Pole -SJB- -SJB- Uninsulated Side Jumper -Pole Side Jumper Insulating Sleeve Screw Type Jumper Notching Tool -T -T Other Accessories: Partition Plate -EBJ -EBJ -EBJ Test Plug -TP Marking Systems: Snap-in marker cards -MX (/card) -MX (/card) -MRX (/card) Snap-in marker cards -MX (/card) -MX (/card) -MX (/card) - Publication A-CAA-EN-P

6 Bulletin Screw Connection Terminal Blocks Plug-In Style Terminal Blocks Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.." (. mm) -JP -JPTP -JDP." (. mm)." ( mm)." ( mm)." (. mm) Selectable component plug-in Selectable component plug-in Two Circuit selectable component terminal block terminal block with test plug socket plug-in terminal block Certifications CSA IEC CSA IEC CSA IEC V V V V V." (. mm) V V Maximum Current A A A A A A A A # # Wire Range (Rated Cross Section) # AWG. mm # AWG. mm AWG AWG. mm Wire Strip Length. in. ( mm). in. ( mm). in. ( mm) Recommended Tightening Torque. lb in (. N m). lb in (. N m). lb in (. N m) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range - + F (- + C) - + F (- + C) - + F (- + C) Short-Circuit Current Rating See page - Terminal Blocks Pkg Qty. Pkg Qty. Pkg Qty. Color: Grey -JP -JPTP -JDP Red -JP-RE Accessories Pkg Qty. Pkg Qty. Pkg Qty. Mounting Rails: m Symmetrical DIN (Steel) -DR -DR -DR m Symmetrical DIN (Aluminum) -DR -DR -DR m Hi-Rise Sym. DIN (Aluminum) -DR -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR -DR -DR End Barriers -EBJ -EBJ -EBJDP End Anchors and Retainers: -ERL -ERL -ERL DIN Rail Normal Duty -EAJ -EAJ -EAJ DIN Rail Heavy Duty -EAHJ -EAHJ -EAHJ : Center Jumper -Pole -CJLJ- -CJLJ- Center Jumper -Pole -CJLJ- -CJLJ- -CJJ- Center Jumper -Pole -CJLJ- -CJLJ- Center Jumper -Pole -CJLJ- -CJLJ- Center Jumper -Pole -CJLJ- -CJLJ- Center Jumper -Pole -CJLJ- -CJLJ- Center Jumper -Pole -CJLJ- -CJLJ- Center Jumper -Pole -CJLJ- -CJLJ- -CJJ- Center Jumper -Pole -CJLJ- -CJLJ- -CJJ- Center Jumper -Pole -CJLJ- -CJLJ- -CJJ- Screw Type Jumper Notching Tool -T Other Accessories: Partition Plate -EBJ -EBJ -PPJDP Test Plug -TP Disconnect Plug -DPL -DPL -DPL Component Plug -CPL -CPL -CPL Fuse Plug Without Blown Fuse Indicator -FPK -FPK -FPK V Blown Fuse Indicator -FPK -FPK -FPK V Blown Fuse Indicator -FPK -FPK -FPK V Blown Fuse Indicator -FPK -FPK -FPK V Blown Fuse Indicator -FPK -FPK -FPK Marking Systems: Snap-in marker cards -MX (/card) -MX (/card) -SMX (/card) Snap-in marker cards -MX (/card) -MX (/card) -MX (/card) Cat. nos. -JP and JPTP use screwless center jumpers. -JDP uses a screw-type center jumper. Use of Center may affect spacings, requiring derating of terminal blocks. See the Terminal Block selection guide, pub. no. -SG*. - Publication A-CAA-EN-P

Bulletin Spring-Clamp Connection Terminal Blocks Mini-Blocks with Center Jumper Option -LMJ Dimensions are not intended to be used for manufacturing purposes.

" ( mm) Mini rail-mount, feed-through terminal block with jumper capability Mini rail-mount grounding terminal block Certifications CSA IEC ATEX CSA IEC V V V." (. mm) Maximum Current A A A Grounding Wire Range (Rated Cross Section) # AWG.

7 Bulletin Spring-Clamp Connection Terminal Blocks Mini-Blocks with Center Jumper Option -LMJ Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.." (. mm) -LMJG." ( mm)." ( mm) Mini rail-mount, feed-through terminal block with jumper capability Mini rail-mount grounding terminal block Certifications CSA IEC ATEX CSA IEC V V V." (. mm) Maximum Current A A A Grounding Wire Range (Rated Cross Section) # AWG. mm # AWG # AWG. mm Wire Strip Length. in. ( mm). in. ( mm) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range - + F (- + C) + F ( + C) Terminal Blocks Pkg Qty. Pkg Qty. Color Grey -LMJ Blue -LMJ-B Green/ -LMJG Accessories Pkg Qty. Pkg Qty. Mounting Rails m Symmetrical DIN (Steel) -DR -DR Grey -ERL -ERL End Anchor Grey -EAJ -EAJ Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Plug-in Center Jumper -Pole -CJLJ- Side Jumper -Pole -SJLM- Side Jumper Installation Tool -TAL- End Barriers Grey -EBLMJ -EBLMJ Blue -EBLMJ-B -EBLMJ-B -EBLMJ-Y -EBLMJ-Y Marking Systems Snap-in Marker Cards -SMX (/card) -SMX (/card) Snap-In Marker Cards -MX (/card) -MX (/card) Hinged marker cards -MHX (/card) -MHX (/card) Markers can be installed over center jumper channel, with or without center jumper installed. Publication A-CAA-EN-P -

8 Bulletin Spring-Clamp Connection Terminal Blocks Plug-in Style Blocks -LDP -LGP -LGTP Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.." ( mm)." (. mm)." (. mm)." ( mm)." (. mm)." (. mm) - Two-circuit terminal block with fixed and plug-in connection on each level. Plug-in connectors can be individual or grouped configurations. Single-circuit grounding terminal block with fixed and plug-in connection. Single-circuit grounding terminal block with fixed and plug-in connection. Certifications CSA IEC CSA IEC CSA IEC V V Maximum Current A A Grounding Grounding Limited Rating - Voltage V Limited Rating - Current A Wire Range (Rated Cross Section) AWG.. mm AWG.. mm AWG Wire Strip Length. in ( mm). in ( mm). in ( mm) Density (Blocks per ft/m) pcs/ft ( pcs/m) pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range - + F (- + C) - + F (- + C) - + F (- + C) Terminal Blocks Color Accessories Mounting Rails m Symmetrical DIN (Steel) Pcs/ Pkg Pcs/ Pkg Grey -LDP Green/ -LGP -LGTP Pcs/ Pkg Pcs/ Pkg.. mm -DR -DR -DR m Symmetrical DIN (Aluminum) -DR -DR -DR m Hi-Rise Sym. DIN (Aluminum) -DR -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR -DR -DR End Barrier Grey -EBLDP -EBLP-Y -EBLTP-Y End Anchors -ERL -ERL -ERL DIN Rail - Normal Duty -EAJ -EAJ -EAJ Din Rail - Heavy Duty -EAHJ -EAHJ -EAHJ Plug-in Center Jumper Pole -CJLJ- Plug-in Center Jumper Pole -CJLJ- Plug-in Center Jumper Pole -CJLJ- Plug-in Center Jumper Pole -CJLJ- Plug-in Center Jumper Pole -CJLJ- Plug-in Center Jumper Pole -CJLJ- Plug-in Center Jumper Pole -CJLJ- Plug-in Center Jumper Pole -CJLJ- Plug-in Center Jumper Pole -CJLJ- Plug-in Center Jumper Pole -CJLJ- Individual Plug-in Connector Grey -STP Green -STP-G -STP-G -STP-G Ganged Connector - Start Plug Grey -SBSTP Ganged Connector - Middle Plug Grey -GSTP Ganged Connector - End Plug Grey -EBSTP Plug-In Component Accessories Locking Element -STPLE -STPLE -STPLE Coding Element -STPCE -STPCE -STPCE Strain Relief -STPSR -STPSR -STPSR Group Marking Rail Mount Group Marking Carrier -GM -GM -GM End Anchor Top Marker Carrier -GMC -GMC -GMC -GMC Top Marker Tag -MX(/card) -MX(/card) -MX(/card) Marking Systems -MRX -MRX -MRX Snap-in Marker Cards (/card) (/card) (/card) Snap-In Marker Cards -MRX (/card) -MRX (/card) -MRX (/card) The Bulletin -GMC marker carrier installs directly on the top of a -EAJ end anchor or a -ERL end retainer for group marking purposes. Blocks contain dual UL/CSA listings and can be used at V with a A rating or V with a A rating. For ganged configurations greater than, use multiple -GSTP plug-in blocks. Publication A-CAA-EN-P Pcs/ Pkg Pcs/ Pkg

Bulletin Spring-Clamp Connection Terminal Blocks Plug-In Style Blocks & Analog Loop Control Block Dimensions are not intended to be used for manufacturing purposes.

9 Bulletin Spring-Clamp Connection Terminal Blocks Plug-In Style Blocks & Analog Loop Control Block Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block. -." (. mm) -LP -LDGP -LDAG." (. mm) Single circuit plug-in component block for a variety of components." ( mm)." ( mm) Terminal block with slot for plug-in component, feed-through circuit and ground connection." ( mm)." ( mm) Analog Loop Control Terminal Block with Feed-Through Circuits and Ground Connection Certifications CSA IEC CSA IEC CSA IEC V V V V V V Maximum Current A A A A A A Wire Range (Rated Cross Section) # AWG mm # AWG. mm # AWG. mm Wire Strip Length. in. ( mm). in. ( mm). in. ( mm) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range - + F (- + C) - + F (- + C) - + F (- + C) Terminal Blocks Pkg Qty. Pkg Qty. Pkg Qty. Color Grey -LP -LDGP -LDAG Accessories Pkg Qty. Pkg Qty. Pkg Qty. Mounting Rails m Symmetrical DIN (Steel) -DR -DR -DR m Symmetrical DIN (Aluminum) -DR -DR -DR m Hi-Rise Symmetrical DIN (Aluminum) -DR -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR -DR -DR End Barrier -EBL -EBLDAG -EBLDAG End Anchors and Retainers -ERL -ERL -ERL DIN Rail Normal Duty -EAJ -EAJ -EAJ DIN Rail Heavy Duty -EAHJ -EAHJ -EAHJ Plug-In Center Jumper -pole -CJK- -CJLJ- -CJLJ- Plug-In Center Jumper -pole -CJK- -CJLJ- -CJLJ- Plug-In Center Jumper -pole -CJK- -CJLJ- -CJLJ- Plug-In Center Jumper -pole -CJK- -CJLJ- -CJLJ- Plug-In Center Jumper -pole -CJK- -CJLJ- -CJLJ- Plug-In Center Jumper -pole -CJK- -CJLJ- -CJLJ- Plug-In Center Jumper -pole -CJK- -CJLJ- -CJLJ- Plug-In Center Jumper -pole -CJK- -CJLJ- -CJLJ- Plug-In Center Jumper -pole -CJK- -CJLJ- -CJLJ- Plug-In Center Jumper -pole -CJK- -CJLJ- -CJLJ- Other Accessories Disconnect Plug -DPL -DPL Component Plug -CPL -CPL Fuse Plug Without Blown Fuse Indicator -FPK -FPK V Blown Fuse Indicator -FPK - FPK V Blown Fuse Indicator -FPK - FPK V Blown Fuse Indicator -FPK - FPK V Blown Fuse Indicator -FPK - FPK Reducing Sleeves AWG (.. mm) White -PSL- Reducing Sleeves AWG (.. mm) Grey -PSL- Reducing Sleeves AWG (.. mm) Dark Grey -PSL- Test Plug -TPL -TP Electrical Warning Plate -EWPL Marking Systems Snap-In Marker Cards -MX (/card) -MX (/card) -MX (/card) Snap-In Marker Cards -MX (/card) -MX (/card) -MX (/card) When using -LDGP with a fuse plug, a center jumper cannot be used on the top level. The only jumper option to use in combination with a fuse plug is a -pole side jumper: -SJLM-. Publication A-CAA-EN-P

10 Bulletin Spring-Clamp Connection Terminal Blocks Flexible Plug-In Connection Blocks Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.." (. mm) -LP -LTP -LQP." ( mm) Single circuit terminal block with fixed and plug-in connection. Plug-in connectors can be individual or grouped configurations.." (. mm)." (. mm) Single circuit terminal block with fixed and plug-in connection. Plug-in connectors can be individual or grouped configurations.." (. mm)." ( mm) Single circuit terminal block with fixed and plug-in connections. Plug-in connectors can be individual or grouped configurations. Certifications CSA IEC CSA IEC CSA IEC V V V V V V Maximum Current A A A A A A Limited Rating - Voltage V V V - Limited Rating - Current A A A Wire Range (Rated Cross Section) # AWG # AWG # AWG mm mm mm Wire Strip Length. in. ( mm). in. ( mm). in. ( mm) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range + F ( + C) + F ( + C) + F ( + C) Terminal Blocks Pkg Qty. Pkg Qty. Pkg Qty. Color Grey -LP -LTP -LQP Accessories Pkg Qty. Pkg Qty. Pkg Qty. Mounting Rails m Symmetrical DIN (Steel) -DR -DR -DR m Symmetrical DIN (Aluminum) -DR -DR -DR m Hi-Rise Symmetrical DIN (Aluminum) -DR -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR -DR -DR End Barrier Grey -EBLQP -EBLTP -EBLQP -EBLP-Y -EBLTP-Y - - End Anchors -ERL -ERL -ERL DIN Rail Normal Duty -EAJ -EAJ -EAJ DIN Rail Heavy Duty -EAHJ -EAHJ -EAHJ Plug-In Center Jumper -pole -CJLJ- -CJLJ- -CJLJ- Plug-In Center Jumper -pole -CJLJ- -CJLJ- -CJLJ- Plug-In Center Jumper -pole -CJLJ- -CJLJ- -CJLJ- Plug-In Center Jumper -pole -CJLJ- -CJLJ- -CJLJ- Plug-In Center Jumper -pole -CJLJ- -CJLJ- -CJLJ- Plug-In Center Jumper -pole -CJLJ- -CJLJ- -CJLJ- Plug-In Center Jumper -pole -CJLJ- -CJLJ- -CJLJ- Plug-In Center Jumper -pole -CJLJ- -CJLJ- -CJLJ- Plug-In Center Jumper -pole -CJLJ- -CJLJ- -CJLJ- Plug-In Center Jumper -pole -CJLJ- -CJLJ- -CJLJ- Other Accessories Test Adapter -TPLP -TPLP -TPLP Individual Plug-in Connector Ganged Connector Start Plug Ganged Connector Middle Plug Ganged Connector End Plug Plug-in Component Accessories Locking Element - Grey -STP -STP -STP Green -STP-G -STP-G -STP-G Grey -SBSTP -SBSTP -SBSTP Grey -GSTP -GSTP -GSTP Grey -EBSTP -EBSTP -EBSTP -STPLE -STPLE -STPLE Coding Element - -STPCE -STPCE -STPCE Strain Relief - -STPSR -STPSR -STPSR Marking Systems Snap-In Marker Cards -MRX (/card) -MRX (/card) -MRX (/card) Snap-In Marker Cards -MX (/card) -MX (/card) -MX (/card) Terminal Blocks contain dual UL/CSA listings and can be used at V with a A rating or V with a A rating. For ganged configurations greater than, use multiple -GSTP plug-in blocks. Publication A-CAA-EN-P -

Bulletin Spring-Clamp Connection Terminal Blocks Plug-in Connection Blocks -LDP -LGP -LGTP Dimensions are not intended to be used for manufacturing purposes.

11 Bulletin Spring-Clamp Connection Terminal Blocks Plug-in Connection Blocks -LDP -LGP -LGTP Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.." ( mm)." (. mm)." (. mm)." ( mm)." (. mm)." (. mm) Two- circuit terminal block with fixed and plug-in connection. Plug-in connectors can be individual or grouped configurations. Single circuit grounding terminal block with fixed and plug-in connection. Single circuit grounding terminal block with fixed and plug-in connection. Certifications CSA IEC CSA IEC CSA IEC V V Maximum Current A A Grounding Grounding Limited Rating - Voltage V Limited Rating - Current A Wire Range (Rated Cross Section) # AWG... mm # AWG... mm # AWG Wire Strip Length. in. ( mm). in. ( mm). in. ( mm) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range + F ( + C) + F ( + C) + F ( + C) Terminal Blocks Pkg Qty. Pkg Qty. Pkg Qty. Color Grey -LDP Green/ -LGP -LGTP... mm Accessories Pkg Qty. Pkg Qty. Pkg Qty. Mounting Rails m Symmetrical DIN (Steel) -DR -DR -DR m Symmetrical DIN (Aluminum) -DR -DR -DR m Hi-Rise Symmetrical DIN (Aluminum) -DR -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR -DR -DR End Barrier Grey -EBLDP -EBLP-Y -EBLP-Y End Anchors -ERL -ERL -ERL DIN Rail Normal Duty -EAJ -EAJ -EAJ DIN Rail Heavy Duty -EAHJ -EAHJ -EAHJ Plug-In Center Jumper -pole -CJLJ- Plug-In Center Jumper -pole -CJLJ- Plug-In Center Jumper -pole -CJLJ- Plug-In Center Jumper -pole -CJLJ- Plug-In Center Jumper -pole -CJLJ- Plug-In Center Jumper -pole -CJLJ- Plug-In Center Jumper -pole -CJLJ- Plug-In Center Jumper -pole -CJLJ- Plug-In Center Jumper -pole -CJLJ- Plug-In Center Jumper -pole -CJLJ- Other Accessories Test Adapter -TPLP Individual Plug-in Connector Ganged Connector Start Plug Ganged Connector Middle Plug Ganged Connector End Plug Plug-in Component Accessories Locking Element - Grey -STP Green -STP-G -STP-G -STP-G Grey -SBSTP Grey -GSTP Grey -EBSTP -STPLE -STPLE -STPLE Coding Element - -STPCE -STPCE -STPCE Strain Relief - -STPSR -STPSR -STPSR Terminal Blocks contain dual UL/CSA listings and can be used at V with a A rating or V with a A rating. - Publication A-CAA-EN-P

12 Bulletin Spring-Clamp Connection Terminal Blocks Plug-in Connection Blocks Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.." (. mm) -LC." ( mm) Feed-through terminal block with plug in comb connection on one side.." (. mm) -LDC." ( mm) Two Circuit terminal block with plug in comb connection on one side of each circuit Certifications CSA IEC CSA IEC V V V V Maximum Current A A A A Wire Range (Rated Cross Section) # AWG. mm # AWG. mm Wire Strip Length. in. ( mm). in. ( mm) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range + F ( + C) + F ( + C) Terminal Blocks Pkg Qty. Pkg Qty. Color Grey -LC -LDC Plug Connection Strips Pkg Qty. Pkg Qty. Color/Quantity Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Black/-Pole -QP- -QP- Accessories Pkg Qty. Pkg Qty. Mounting Rails m Symmetrical DIN (Steel) -DR -DR m Symmetrical DIN (Aluminum) -DR -DR m Hi-Rise Sym. DIN (Aluminum) -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR -DR End Barriers Grey -EBLC -EBLDC End Anchors and Retainers: -ERL -ERL DIN Rail Normal Duty -EAJ -EAJ DIN Rail Heavy Duty -EAHJ -EAHJ Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Plug-in Center Jumper -Pole -CJLJ- -CJLJ- Other Accessories Group Marking Carrier -GM -GM Marking Systems Snap-In Marker Cards -MX (/card) -MX (/card) Snap-In Marker Cards -MX (/card) -MX (/card) Hinged Marker Card -MHX (/card) Publication A-CAA-EN-P -

13 Screwless Center For Use With Color Pkg Qty. -L, LT, LQ, LD, LDC -LM, LC, LDC, LDAG, LDGP, JKD, JP, J, JTW (see Note) -CJL- -CJL- -CJL- -CJL- -CJL- -CJLJ- Red -CJLJ--R Blue -CJLJ--B Black -CJLJ--BL -CJLJ- Red -CJLJ--R Blue -CJLJ--B Black -CJLJ--BL -CJLJ- -CJLJ- -CJLJ- -CJLJ- -CJLJ- -CJLJ- -CJLJ- Red -CJLJ--R Blue -CJLJ--B Black -CJLJ--BL White -CJLJ--W -CJLJ- Red -CJLJ--R Blue -CJLJ--B Black -CJLJ--BL White -CJLJ--W For Use With Pkg Qty. -RFB -RAFB -CJR- -CJR- -CJR- -CJR- -CJR- -CJR- -CJR- -CJR- -CJR- -CJRA- -CJRA- -CJRA- -CJRA- Bulletin IEC Terminal Block Accessories For Use With Color Pkg Qty. -J, JM (see Note) -L, LT, LD -CJLJ- Red -CJLJ--R Blue -CJLJ--B Black -CJLJ--BL -CJLJ- Red -CJLJ--R Blue -CJLJ--B Black -CJLJ--BL -CJLJ- -CJLJ- Red -CJLJ--R Blue -CJLJ--B Black -CJLJ--BL -CJLJ- Red -CJLJ--R Blue -CJLJ--B Black -CJLJ--BL -CJL- -CJL- -CJL- -CJL- -L -CJL- -L -CJL- -L -CJL- -L, LT, LQ, LP, LD, LDC, LKD, LTF, LS, LD -L, LT, LQ, LDDF, LDDR, LDSS, LD, LDC, LD -CJK- -CJK- -CJK- -CJK- -CJK- -CJK- -CJK- -CJK- -CJK- -CJK- -CJK- -CJK- -CJK- -CJK- -CJK- -CJK- -CJK- -CJK- -CJK- -CJK- Preferred availability cat. nos. are bold. Publication A-CAA-EN-P -

Bulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks

Bulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven method