55 Series - Miniature General Purpose Relays 5-10 A
|
|
|
- Annice Jennings
- 5 years ago
- Views:
Transcription
1 Series - Miniature General Purpose Relays -0 A - Plug-in or P.C.B. versions - AC or DC coils - Lockable test button and mechanical flag indicator as standard on and CO relays types - Sockets and accessories: see 9, 99 and series - RT III (wash tight) version available... - pole - P.C.B. mounting - pole - P.C.B. mounting - pole - P.C.B. mounting A A 0.. A A 0... A A Copper side view Copper side view Copper side view h =. mm h =. mm h =. mm Contact specifications Contact configuration CO CO CO Rated current/maximum peak current A 0/0 0/0 /0 Rated voltage/maximum switching voltage V AC 0/00 0/00 0/0 Rated load in AC VA,00,00,0 Rated load in AC (0 VAC) VA Single phase motor rating (0 VAC) kw Breaking capacity in DC: 0/0/0V A 0/0./0. 0/0./0. /0./0. Minimum switching load mw (V/mA) 00 (/) 00 (/) 00 (/) Standard contact material AgNi AgNi AgNi Coil specifications Nominal voltage (U N) V AC (0/0 Hz) V DC Rated power AC/DC VA (0 Hz)/W./././ Operating range AC (0 Hz) (0..)U N (0..)U N (0..)U N DC (0..)U N (0..)U N (0..)U N Holding voltage AC/DC 0. U N/0. U N 0. U N/0. U N 0. U N/0. U N Must drop-out voltage AC/DC 0. U N/0. U N 0. U N/0. U N 0. U N/0. U N Technical data Mechanical life AC/DC cycles 0 0 / / /0 0 Electrical life at rated load AC cycles Operate/release time (bounce included) ms 0/ 0/ 0/ Insulation according to EN 0-. kv/. kv/. kv/ Insulation between coil and contacts (./0µs) kv... Dielectric strength between open contacts V AC,000,000,000 Ambient temperature range C Environmental protection RT I RT I RT I : (according to type) BEAB RINA C US
2 TECHNICAL DATA INSULATION Series - Miniature General Purpose Relays -0 A INSULATION according to EN 0- insulation rated voltage V 0 IMMUNITY CONDUCTED DISTURBANCE IMMUNITY OTHER DATA VIBRATION RESISTANCE (0 Hz): NO/NC g/g / rated impulse withstand voltage kv. pollution degree overvoltage category BURST (according to EN 000--) level ( kv) SURGE (according to EN 000--) level ( kv) POWER LOST TO THE ENVIRONMENT CO CO CO without contact current with rated current RECOMMENDED DISTANCE between RELAYS mounted on P.C.B.s mm ε W W. III CONTACT SPECIFICATIONS F H A B C D Electrical life vs AC load. = CO relay type ( A). = - CO relay type (0 A). LOAD RATED CURRENT (A) DC VOLTAGE (V) Breaking capacity for DC load. = - CO type. = CO type. A = Load applied to contact B = Load applied to contacts in series C = Load applied to contacts in series D = Load applied to contacts in series When switching a resistive load (DC) having voltage and current values under the curve the expected electrical life is ε 00 0 cycles. In case of DC loads the connection of a diode in parallel with the load will permit the same electrical life as for a DC load. Note: the release time of load will be increase. 0
3 COIL SPECIFICATIONS Series - Miniature General Purpose Relays -0 A AC VERSION DATA Nominal Coil Operating range Resistance Rated coil voltage code consumption U N U min U max R I at U N (0Hz) V V V & ma ,00 0.0, ,00 0.0, ,00. DC VERSION DATA Nominal Coil Operating range Resistance Rated coil voltage code consumption U N U min U max R I at U N V V V & ma , , ,00. R AC U.0 U N R DC U.0 U N AMBIENT TEMPERATURE ( C) Operating range (AC type) vs ambient temperature. - Max coil voltage permitted. - Min pick-up voltage with coil at ambient temperature AMBIENT TEMPERATURE ( C) Operating range (DC type) vs ambient temperature. - Max coil voltage permitted. - Min pick-up voltage with coil at ambient temperature.
4 9 Series - Sockets and Accessories for Series Relays 9.0 C US - RATED VALUES: 0 A - 0 V - DIELECTRIC STRENGTH: ε kv AC - PROTECTION CATEGORY: IP 0 - AMBIENT TEMPERATURE: (-0 +0) C - SCREW TORQUE: 0. Nm - WIRE STRIP LENGTH: mm - MAX WIRE SIZE: Relay type...,. Clamp terminal socket: panel or mm rail (EN 00) mount retaining clip 09. supplied with socket packaging code SMA Metal retaining clip 09. Plastic retaining and release clip way jumper link for 9.0, 9.0 and 9.0 sockets Identification tag Modules (see table below) 99.0 Timer modules.0,.0 Sheet of marker tags for retaining and release clip Ø Ø Ø 0.9 mm x / x. x / x. AWG x0 / x x / x. 9 COM 0 NO NO NO NC NC NC 09.0 A A COIL A A COIL way jumper link for 9.0, 9.0 and 9.0 sockets 09.0 A A COIL RATED VALUES: 0 A - 0 V modules for 9.0, 9.0 and 9.0 sockets BLUE Diode** (+A) (...0) V DC Diode (inverted polarity) (...0) V DC LED (...) V DC/AC LED (...0) V DC/AC LED (0...0) V DC/AC LED + Diode** (+A) (...) V DC LED + Diode** (+A) (...0) V DC LED + Diode** (+A) (0...0) V DC LED + Diode (inverted polarity) (...) V DC LED + Diode (inverted polarity) (...0) V DC LED + Diode (inverted polarity) (0...0) V DC LED + Varistor (...) V DC/AC LED + Varistor (...0) V DC/AC LED + Varistor (0...0) V DC/AC RC circuit (...) V DC/AC RC circuit (...0) V DC/AC RC circuit (0...0) V DC/AC No - remanence ( k&/w) (0...0) V AC **For DC supply, apply the positive to terminal A. Modules in Black housing are available on request.
5 9 Series - Sockets and Accessories for Series Relays 9. Relay type...,. Screw terminal socket: panel or mm rail (EN 00) mount retaining clip 09. supplied with socket packaging code SMA Retaining clip 09. Modules (see table below) 99.0 C US Ø Ø Ø - RATED VALUES: 0 A - 0 V - DIELECTRIC STRENGTH: ε kv AC - PROTECTION CATEGORY: IP 0 - AMBIENT TEMPERATURE: (-0 +0) C - SCREW TORQUE: 0. Nm - WIRE STRIP LENGTH: mm - MAX WIRE SIZE: NO NO NO mm x. / x. x. / x. AWG x / x x / x NC NC NC A A COIL A A A COIL A COIL 9 COM 0 9. C US Relay type. Colour BLUE BLACK Screw terminal socket: panel or mm rail (EN 00) mount retaining clip 09. supplied with socket packaging code SMA Retaining clip 09. Modules (see table below) RATED VALUES: 0 A - 0 V - MAX WIRE SIZE: - DIELECTRIC STRENGTH: ε kv AC - PROTECTION CATEGORY: IP 0 mm - AMBIENT TEMPERATURE: (-0 +0) C x. / x. x. / x. - SCREW TORQUE: 0. Nm AWG x / x x / x - WIRE STRIP LENGTH: 9 mm 99.0 A modules for 9., 9., 9. and 9. sockets BLUE Diode** (+A) (...0) V DC Diode (inverted polarity) (...0) V DC LED (...) V DC/AC LED (...0) V DC/AC LED (0...0) V DC/AC LED + Diode** (+A) (...) V DC LED + Diode** (+A) (...0) V DC LED + Diode** (+A) (0...0) V DC LED + Diode (inverted polarity) (...) V DC LED + Diode (inverted polarity) (...0) V DC LED + Diode (inverted polarity) (0...0) V DC LED + Varistor (...) V DC/AC LED + Varistor (...0) V DC/AC LED + Varistor (0...0) V DC/AC RC circuit (...) V DC/AC RC circuit (...0) V DC/AC RC circuit (0...0) V DC/AC No - remanence ( k&/w) (0...0) V AC A NC NO COM COIL Ø. 9. **For DC supply, apply the positive to terminal A. Modules in Black housing are available on request. Green LED is standard. Red LED available on request.
6 9 Series - Sockets and Accessories for Series Relays RATED VALUES: 0 A - 0 V - DIELECTRIC STRENGTH: ε kv AC - PROTECTION CATEGORY: IP 0 - AMBIENT TEMPERATURE: (-0 +0) C - SCREW TORQUE: 0. Nm - WIRE STRIP LENGTH: mm - MAX WIRE SIZE: Relay type.,. Colour BLUE BLACK Clamp terminal socket: panel or mm rail (EN 00) mount retaining clip 09. supplied with socket packaging code SMA Retaining clip 09. Identification tag Modules (see table below) 99.0 A NO NC A COIL mm x / x. x / x. AWG x0 / x x / x 0 COM modules for 9.. sockets BLUE Diode** (+A) (...0) V DC LED (...) V DC/AC LED (...0) V DC/AC LED (0...0) V DC/AC LED + Diode** (+A) (...) V DC LED + Diode** (+A) (...0) V DC LED + Diode** (+A) (0...0) V DC LED + Varistor (...) V DC/AC LED + Varistor (...0) V DC/AC LED + Varistor (0...0) V DC/AC RC circuit (...) V DC/AC RC circuit (...0) V DC/AC RC circuit (0...0) V DC/AC No - remanence ( k&/w) (0...0) V AC **For DC supply, apply the positive to terminal A. Modules in Black housing are available on request. Green LED is standard. Red LED available on request. 9. C US Relay type...,. P.C.B. socket retaining clip 09. supplied with socket packaging code SMA Metal retaining clip RATED VALUES: 0 A - 0 V - DIELECTRIC STRENGTH: ε kv AC - AMBIENT TEMPERATURE: (-0 +0) C =. = =. = =. = Copper side view
7 9 Series - Sockets and Accessories for Series Relays 9. C US Relay type...,. Panel mount solder socket: mm thick panel retaining clip 09. supplied with socket packaging code SMA Metal retaining clip RATED VALUES: 0 A - 0 V - DIELECTRIC STRENGTH: ε kv AC - AMBIENT TEMPERATURE: (-0 +0) C C US - RATED VALUES: 0 A - 0 V - DIELECTRIC STRENGTH: ε kv AC - AMBIENT TEMPERATURE: (-0 +0) C Relay type...,. Panel mount socket: M screw mount - solder connections retaining clip 09. supplied with socket packaging code SMA Metal retaining clip 09.. Ø Sheet of marker tags for retaining clip 09.0 ( tags) PACKAGING CODES How to code and identify retaining clip and packaging options for sockets. Code options according to the last three letters: 9 0 S M A A Standard packaging SM Metal retaining clip SP Plastic retaining clip SX No retaining clip
2 pole 10 A PCB mount A1 A
Series - Miniature general purpose relays - 0 A Features Printed circuit mount, general purpose, & Pole relays. - Pole 0 A. - Pole 0 A. - Pole A AC coils & DC coils Cadmium Free contacts (preferred version)
0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A 55 Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
5 mm contact pin pitch PCB or 95 series sockets
1. = 12.4 1. = 12.4 44 Series - Miniature PCB relays 6-10 A Features 44.2 44.62 2 Pole relay range 44.2-2 Pole 6 A ( mm pin pitch) 44.62-2 Pole 10 A ( mm pin pitch) PCB mount - direct or via PCB socket
40 Series - Miniature PCB relays A. Features
1. = 12.4 1. = 12.4 1. = 12.4 40 Series - Miniature PCB relays 8-10 - 16 A Features 40.31 40.1 40.2 1 & 2 Pole relay range 40.31-1 Pole 10 A (3. mm pin pitch) 40.1-1 Pole 10 A ( mm pin pitch) 40.2-2 Pole
CO (DPDT) 16/25 250/ /440 2,000 4, /0.5/ /0.5/ (5/5) 300 (5/5) AgNi
46 Series - Miniature industrial relays 8-16 A Features 46.52 46.61 1 & 2 Pole relay range 46.52-2 Pole 8 A 46.61-1 Pole 16 A Socket mount or direct connection via Faston connectors AC coils & DC coils
46 and 56 Series - Relays for railway applications 8-12 A. Features 46.52T 56.32T 56.34T
46 and 56 Series - Relays for railway applications 8-12 A Features 46.52T 56.32T 56.34T Plug-in power relays: 8 A, 2 pole 12 A, 2 and 4 pole DC coils with extended range Complies with UNI CEI 11170-3 (protection
2 pole, 10 A power contacts 8 pin plug-in CO (DPDT) 3 CO (3PDT) Rated current/maximum peak current
0 Series - General purpose relays - 0 Features 0. 0. Plug-in mount 0 General purpose relay & pole changeover contacts Cadmium Free contacts (preferred version) C coils & DC coils UL Listing (certain relay/socket
General purpose relays 7-10 A
55 SЕRIES General purpose relays 7-10 utomation for blinds, grilles and shutters Control and management of electric power Shipyards Road / tunnel lighting Hoists and cranes Circuit breakers and switches
60 Series - General purpose relays 6-10 A. Features SERIES
60 Series - General purpose relays 6-10 60 SERIES Features 60.12 60.13 Plug-in mount 10 General purpose relay 2 & 3 pole changeover contacts Cadmium Free contacts (preferred version) C coils & DC coils
44 SERIES. PCB/Plug-in relays from 6 to 10 A
44 PCB/Plug-in relays from 6 to 10 44 2 CO power relays with high separation between adjacent contacts Direct PCB or socket mount Type 44.52 -- 2 CO 6 (5 mm pin pitch) Type -- 2 CO 10 (5 mm pin pitch)
Miniature Industrial relay 8-16 A
46 SЕRIES Miniature Industrial relay 8-16 utomation for blinds, grilles and shutters Elevators and lifts Shipyards Road / tunnel lighting Hoists and cranes Bottling plant Control panels Panels for electrical
90 Series - Socket overview for 60 series relays
90 Series - Socket overview for 0 series relays See page 90 90.0 99.0 90.0 0. Screw terminal (Box clamp) socket Panel or mm rail - Coil indication and EMC 90.0 0. Double terminal (EN 00) mount suppression
94 Series - Socket overview for 55 series relays
94 Series - Socket overview for 55 series relays 94.04 See page 7 Module Socket Relay Description Mounting 99.02 94.02 55.32 Screw terminal (Box clamp) socket Panel or 35 mm rail - Coil indication and
Time scale: from 0.05s to 100h Multi-function Plug-in for use with 90.02, 90.03, and sockets
86 Series - Timer modules Features 86.00 86.30 Timer modules for use in conjunction with relay & socket. 86.00 - Multi-function & multi-voltage timer module 86.30 - Bi-function & multi-voltage timer module
General purpose relays 6-10 A
60 SЕRIES General purpose relays 6-10 Shipyards Hoists and cranes Road / tunnel lighting Burners, boilers and furnaces Wood-processing machines Panels for electrical distribution Control panels Control
2 pole, 10 A AC/DC supply non polarized Plug-in for use with 94 series sockets
Miniature plug-in timers 7-10 A Plug-in timer.02-2 Pole 10 A.03-3 Pole 10 A.04-4 Pole 7 A Multifunctions Seven time scales, from 0.05 s to 100 h 94 series sockets for 35 mm rail (EN 60715) mount with push-in
Time scale: from 0.05 s to 100 h Multi-function Plug-in for use with 96 series sockets. Relay + socket. Wiring diagram (without control signal)
86 Timer modules 86 Timer modules for use in conjunction with relay & socket. 86.00T - Multi-function & multi-voltage timer module 86.30T - Bi-function & multi-voltage timer module Complies with EN 45545-2:2013
xxx.1xx xxx.4xx0. AgNi contacts, specifically intended for resistive and slightly inductive loads as well as for motor loads
22 Series - Modular contactors 25-40 - 63 22 SERIES Features 22.32.0.xxx.1xx0 22.32.0.xxx.4xx0 25 modular contactor - 2 pole 17.5 mm wide NO contact gap 3 mm, double break Continuous duty for the coil
Slim P.C.B. Relays (EMR or SSR) A
34 SЕRIES Slim P.C.B. Relays (EMR or SSR) 0.1-0.2-2 - 6 Bottling plant Packaging machines Labelling machines Road / tunnel lighting Burners, boilers and furnaces Timers and lighting controls Electronic
MasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy
Pluggable interface relays RT, PT and MT range
Content Pluggable interface relays RT, PT, MT Benefits and advantages, approvals... 190 Ordering details... 191 Technical data... 194 Circuit diagrams... 19 Dimensional drawings... 19 189 Benefits and
Miniature Relay PT 2 pole 12 A, 3 pole 10 A or 4 pole 6 A DC- or AC-coil
2, 3 or 4 C/O contacts Switching performance up to 3000 VA Relay height 29 mm Cadmium-free contact material Mechanical indicator Manual test tab, optionally lockable. White marking tabs Applications Universal
RUC industrial relays of small dimensions
RUC 135 with adaptor (V) Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current
Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage
35 Royal Road Flemington, NJ 08822-6000 Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage R ated load Min. switching current Max. inrush current
Scheda prodotto Relè Series E
Relè Miniatura All-or-Nothing relays ideally suited for any electronic appliances demanding very compact design and low power consumption. Design includes a protective dust cover and a completete range
881WP. Type List. Ordering Information 881 WP1-1A C - - C Basic series designation 4. C -- Contact material AgNi
Type List Terminal style WP (High power type, terminals)-.0mm pitch Contact form A (SPNO) Features Low Profile mm w/ fasten terminals. High Rating 7A 277VAC. High temperature withstand up to 2. UL/CUL
General Purpose Relay
General Purpose Relay KML 15A switching capability 1.5kV dielectric strength (between coil and contacts) Various terminals available Socket available 1 to 3 pole configurations 1. COIL DATA (at 23 ) 1)
Industrial Relay KML(1C, 2C)
Industrial Relay KML(1C, 2C) Features 1C: 15A, 2C: 10A switching capability 1.5kV dielectric strength (between coil and contacts) Various terminals available Socket available 1 & 2 poles configurations
V REG.-Nr. 6106, Z E SCHRACK. Accessories Industrial Power Relay RT. General Purpose Relays. pinnings 3.5mm / 5mm; relay height 15.
Accessories Industrial Power Relay RT n For Industrial Power Relay RT pinnings 3.5mm / 5mm; relay height 15.7 mm n New retainer clip with ejection function n Easy replacement of relays on a densely packed
NSL..S 4-pole / 8-pole Contactor Relays - Spring Terminals
NSL..S 4-pole / 8-pole Contactor Relays - Spring DC Operated Description - 1-stack contactor relays: 4-pole, - 2-stack contactor relays: 8-pole, - Mechanically linked contact elements available, - Low
ASL09..S 3-pole Contactors - Spring Terminals
4 kw 5 hp ASL09..S 3-pole Contactors - Spring DC Operated Description - 3-pole contactors with spring terminals, - N.C. or N.O. built-in auxiliary contact, - Low coil consumption, - Polarity on the coil
Scheda prodotto Relè Series B
Relè di Potenza All-or-Nothing Relays designed to meet high power switching applications with up to three changeover contacts, rated 4000 or 7500 VA - AC1. They are ideally suited for arduous duties where
Series 858, Relay Sockets with Industrial Relay
Series 858, Relay Sockets with Industrial Relay voltage: V DC 4 changeover contacts voltage: V DC 4 changeover contacts (gold contacts) * In order to prevent the gold layer from being damaged, these values
Micro Contactor MA Series
Relay-sized contactor, making it the world s smallest >3mm contact clearance acc. to IEC 60335-1 for Safety Applications Reversing contactor with mechanical interlock 3 Pole and 1 Aux. Contact NO or NC
Multi-function. Mono-function 1 NO (SPST-NO)
Features Range of electronic staircase timers 17.5 mm wide Time setting from 30 s to 20 min Zero crossing load switching Switch-off early warning - model 14.01 Suitable for 3 or 4 wire systems, with automatic
General Purpose Relays Accessories. Accessories Industrial Power Relay RT
Industrial Power Relay RT n For Industrial Power Relay RT pinnings 3.5 mm / 5 mm; n New retainer clip with ejection function n Easy replacement of relays on a densely packed DIN rail n No reduction of
VEO. V2TF01 Art.Nr.: V2TF01P Art.Nr.: TECHNICAL DATA
P Temperature monitoring (PTC) Short-circuit monitoring Supply voltage 24-240 V AC/DC 1 normally open contact Width 22,5 mm Status indication LED U: Supply voltage LED TFailure: Temperature failure TECHNICAL
functions: --Staircase timer --Staircase timer + maintenance function --Staircase timer with early warning
14 SERES 14 SERES Multi-function electronic staircase timers 1 O 16 A 17.5 mm wide Type 14.01 --8 functions --Switch-off early warning options Type 14.71 --3 functions Time setting from 30 seconds to 20
General Purpose Low Power PCB Relays
Power PCB Relay RT2 DC and AC (for global markets) n 2 pole 8A, 2 form C (CO) or 2 form A (NO) contacts n DC or AC coil n 5kV/10mm coil-contact, reinforced insulation n Ambient temperature up to 85 C n
Sealed type washable 1C H-1C-C 812H-1C-V 812H-1C-S (SPDT) F 812H-1C-C F 812H-1C-V F 812H-1C-S F
8H Type List 8H Terminal style Contact form Features Miniature PCB Power Relays A 2VAC. High CTI 2 material or product comply with IEC 33-1 are available. UL Insulation Class F. VDE, UL/CUL, TUV, CSA/CUS
Auxiliary contact blocks - with spring terminals Accessories
Auxiliary contact blocks - with spring terminals Accessories CA3-10S 1SBC101037F0014 Description The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits. CA3
AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals
AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals 25 to 55 A culus CE Application AF09... AF38 4-pole contactors are used for controlling power circuits up to 600 V AC and 240 V DC.
Accessories Miniature Relay PT
Accessories Miniature Relay PT Easy replacement of relays on a densely packed DIN rail Socket with logical arrangement of control/load terminals High quality rising clamp terminals Captive combination
TeSys contactors. Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current Ie. to be wired in series
Selection 3-pole shockproof contactors FG d.c. supply Selection guide for utilisation categories DC-1 to DC-5 Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current
Miniature Intermediate Power Relay HY
Miniature Intermediate Power Relay HY A switching capabilities (C, C).kV dielectric strength (between coil and contacts) Various terminals, test button available Different sockets available to pole configurations
General Purpose Relays Industrial Relays. Power Relay RM 2/3/7
Power Relay RM 2/3/7 n 2/3 pole 10/16A, 2 form C (CO) or 3 form C (CO) contacts n Switching capacity up to 6000VA n DC or AC coil n Mechanical indicator n Push-to-test button n Plug-in version, PCB terminals,
AF40... AF96 3-pole contactors Technical data
Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional
PCB Relay. Ordering Information. SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load G6C - - VDC
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load Compact: 20 15 10 mm (L W H). Low power consumption: 200 mw. Flux protection or fully sealed construction available. Unique
Ordering Information. Text PCB Power Relay G5RL. Low-profile Relay with Various Models. Power Relays
Low-profile Relay with Various Models Low profile:.7 mm in height Clearance and creepage distance Between coil and contacts: 8 mm/8 mm Between contacts of the same polarity: 3 mm/4 mm Models with AC coil
RUMC22F7 universal plug-in relay - Zelio RUM - 2 C/O V AC - 10 A - with LED
Characteristics universal plug-in relay - Zelio RUM - 2 C/O - 120 V AC - 10 A - with LED Product availability : Stock - Normally stocked in distribution facility Price* : 13.79 USD Main Range of product
Basic function. Rated current. Appropriate for three-phase motors of output 2) [kw] I n. = 400 V a.c. 2) Appropriate for three-phase motors
![Basic function. Rated current. Appropriate for three-phase motors of output 2) [kw] I n. = 400 V a.c. 2) Appropriate for three-phase motors](/thumbs/74/70162763.jpg "Basic function. Rated current. Appropriate for three-phase motors of output 2) [kw] I n. = 400 V a.c. 2) Appropriate for three-phase motors")
MOTOR STARTERS SM Basic function Switching and protection of motors up to A Protection against short-circuit and protection against overload The device responds to phase failure The device is provided
AF40... AF96 3-pole contactors 30 to 60 hp at 480 V AC AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts
AF4... AF96 -pole contactors to 6 hp at 48 V AC AC / DC operated with N.O. N.C. auxiliary contacts Description AF4... AF96 contactors are mainly used for controlling -phase motors and power circuits up
General Purpose Relay
General Purpose Relay Exceptionally reliable general purpose relay Long life (minimum 100,000 electrical operations) assured by silver contacts Built-in operation indicator (mechanical, LED), diode surge
Z b. General Purpose Relays PCB Relays SCHRACK. Power PCB Relay RT1
Power PCB Relay RT1 n 1 pole 12A/16A, 1 form C (CO) or n DC or AC coil n 5kV/10mm coil-contact, reinforced insulation n Ambient temperature 85 C (DC coil) n WG version: product in accordance to IEC 60335-1
Features. Type List. Ordering Information S - 1A - - C - Contact Rating
Features Heavy duty A VAC, A VAC power type. AC & DC coils are both available. PCB terminals and quick terminal types. Optional for special large contact gap 3.0mm version. SPNO-ST & DPNO-ST contact configuration.
Accessories Miniature Relay PT (Continued)
Accessories Miniature Relay PT Easy replacement of relays on a densely packed DIN rail No reduction of protection class or creepage/clearance with plastic retainer Plug-in indicator- and protection modules
Miniature General Purpose Relay HY
www.industrialcontroldirect.com Tel: --00 Fax: -9-09 info@industrialcontroldirect.com Miniature General Purpose Relay HY General purpose, amp Plug in Power Relay, available in PCO, PCO and PCO Arc barriers
Single-pole 10A35VDC 0.8mm Contact Gap Power Relay : G5LE-G Single-pole 16A250VAC Power Relay : G5LE-E. Contact Form 10A 35VDC
PCB Relay R G5LE-E/-G Single-pole 0A35VDC 0.8mm Contact Gap Power Relay : Single-pole 6A250VAC Power Relay : G5LE-E Sub-miniature 'sugar cube ' relay with universal terminal footprint. UL class-f coil
Ordering Information. Text PCB Power Relay G5LE
A Cubic, Single-pole 10-A Power Relay Single-pole 10A 35VDC, 0.8mm contact gap: G5LE-G Single-pole 16A 250VAC: G5LE-E ROHS compliant. Sub-miniature sugar cube relay with universal terminal footprint. Conforms
PCB Relay. Contact form Terminal Single-side stable Single-winding latching
PCB Relay Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98 mw pickup coil power. Impulse withstand voltage meets FCC Part 68 requirements. Plastic-sealed construction. Unique moving
AF09... AF30 3-pole Contactors up to 20 HP / 480 VAC
AF0... AF0 -pole Contactors up to 20 HP / 480 VAC Contactors and Overload Relays Overview...2 AF0... AF0 -pole Contactors Ordering Details...4 Main Technical Data...20 DC Circuit switching...2 Main Accessory
1 Form A 5A small size power relay for interface
1 Form A 5A small size power relay for interface PQ RELAYS RoHS compliant Protective construction: Sealed type FEATURES 1. Compact and slim 20 mm (L) mm (W) 16 mm (H).787 inch (L).394 inch (W).630 inch
Description. Positive safety relays
Type N & KC Positive safety Description A.C. or D.C. operated DIN rail or panel mounting 600 volt heavy duty design, A600-10 amp, Q300-5 amp Snap-on accessories available: 1 & 4 pole adder deck Pneumatic
RSB1A160B7 interface plug-in relay - Zelio RSB - 1 C/O - 24 V AC - 16 A
Characteristics interface plug-in relay - Zelio RSB - 1 C/O - 24 V AC - 16 A Stock Code: Stock - Normally stocked in distribution facility Price*: 4.20 USD Complementary Shape of pin Jul 8, 2015 Main Commercial
RU Series Universal Relays
Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator available on plug-in relays No internal
Approved Standards. Ordering Information. Mini Motor Contactor J7KNA. Model Number Legend. Main contactor. Accessories. Mini Motor Contactor J7KNA 1
Mini Motor Contactor J7KNA ) Main contactor AC & DC operated Integrated auxiliary contacts Screw fixing and snap fitting (35 mm DIN-rail) Range from 4 to 5.5 (AC 3, 380/415V) 4 -main pole version (4 AC
Data sheet TERMSERIES TRZ 120VUC 1CO
relay module, complete modules consisting of a relay and a base with AC/DC/UC coils, available in different versions: With screw and tension-clamp connection AgNi contact, optionally with hard gold-plated
Characteristics TeSys contactors 0 TeSys k contactors and reversing contactors
90 Characteristics TeSys contactors 0 TeSys k contactors and reversing contactors Environment characteristics Conforming to standards IEC 60947, NF C 63-110, VDE 0660, BS 5424 Product certifications LCp
R600 & R500. Interface relays R600, R500. Phone: Fax: Web: -
R00, R500 R00 CR & R500 Range Range R00 & R500 R00 CR & R500 Range Range, R00, R500 Benefits and advantages R00 series Standard range in screw clamp or spring clamp versions Spacing : mm Wire size : 2.5
Type Contact form Enclosure ratings Model Standard SPST-NO (Class A) Flux protection G5LA-1A Sealed
PCB Relay G5LA A Cubic, Single-pole 1A Power Relay Economical cube relay with universal terminal footprint Conforms to VDE435, CQC UL recognized/ CSA certified. High switching power: 1A @ 5VAC Withstands
FINDER RELAYS & MODULAR TIMERS IN STOCK AT MARSH ELECTRONICS
Finder relays, modular timers and accessories in stock at FINDER RELAYS & MODULAR TIMERS IN STOCK AT MARSH ELECTRONICS Finder Relay has hundreds of possible combinations of relays and modular timers. Those
PCB Relay. 2. Contact Form 2: DPDT 3. Terminal Shape None: PCB terminal F: Surface mount terminal
PCB Relay Ultracompact, Ultrasensitive DPDT Relay Compact size and low 5-mm profile. Low power consumption (140 mw for single-side stable, 100 to 300 mw for latching type) and high sensitivity. Low thermoelectromotive
Load Resistive load (p.f. = 1) Inductive load (p.f. = 0.40, L/R = 7 ms) Rated load 5 A at 250 VAC, 30 VDC 2 A at 250 VAC, 30 VDC
Power PCB Relay G6D-ASI Reduced board space ideal for high-density mounting (45% smaller than the surface area of G6B). Slim package: measures 6.5 W x 17.5 L x 12.5 H mm Switches loads up to 5 A, 250 VAC/30
Mounting type Contact form PCB terminals Screw terminals Quick-connect terminals
Power Relay A High-capacity, High-dielectric-strength, Multi-pole Relay Used Like a Contactor Miniature hinge for maximum switching power for motor loads as well as resistive and inductive loads. No contact
Type Terminal Coil Contact form Model
General Purpose Relay MK Exceptionally reliable general purpose relay. Long life (minimum 100,000 electrical operations) assured by silver contacts. Built-in operation indicator (mechanical, LED), diode
General Purpose Relays Accessories. Accessories Miniature Relay PT
Miniature Relay PT n Easy replacement of relays on a densely packed DIN rail n No reduction of protection class or creepage/clearance with plastic retainer n Plug-in indicator- and protection modules n
Short form catalogue. Motor protection & control
Short form catalogue Star Series Motor protection & control Motor Protection and Control up to 25 HP / 600 VAC Overview...2 Contactors and Overload Relays...11 4-pole Contactors...41 Control Relays...59
RE48AML12MW time delay relay 2 functions s..300 h V AC - 2 OC
Characteristics time delay relay 2 functions - 0.02 s..300 h - 24..240 V AC - 2 OC Complementary Product front plate size Control type Housing material Main Range of product Product or component type Electrical
General Purpose Relays Power Relays. T9G series, DC coil 30A PCB Relay
T9G series, DC coil 30A PCB Relay n 30A switching in NO and 20A in CO n Minimum Board space (29mm x 21.5mm) n Meets UL 508 for clearance / creepage n Meets IEC 61810-1 for reinforced insulation n Option
AF / AF12Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101404D0201 24/03/11-30-10-.. / Z-30-10-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220
UL & CSA Technical data A/AE9 A/AE/AF110, AL9 AL40 AC & DC operated
11Across the line UL & CSA Technical data A/AE9 A/AE/AF110, AL9 AL40 AC & DC operated contactor frame size A/AE/AL A/AE/AL A/AE/AL A/AE/AL A/AE/AL A/AE/AL A/AE/AF A/AE/AF A/AE/AF A/AE/AF A/AE/AF A/AE/AF
Relays & Sockets. RQ Series PCB Relays
RQ RQ Series PCB Relays IDEC RQ relays are low-profile, PCB relays in a compact package. Size equals value. RQ relays are small, yet maintain high contact ratings and long operational life. For larger
Limit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66
Limit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66 Double Insulation (for thermoplastic type) High mechanical resistant Degree of protection IP65 (thermoplastic) IP66
Motorized switch-disconnectors OTM 40 to 125 Amperes
Motorized switch-disconnectors OTM to 125 mperes With the new range of motorized-switch disconnectors, BB offers now a full range from to 2500 mperes. Thanks to the design, OTM...125 are a good solution
PCB Relay. Single-side stable EN60950/EN41003 PCB terminal G6S-2 G6SU-2 G6SK-2 G6S-2-Y Surface mounting. stable
PCB Relay Surface Mounting DPDT Relay Long terminals for ideal for soldering and mounting reliability. Space-saving inside-l terminal. High dielectric strength between coil and contacts (2,000 VAC), and
Surface mounting, flush mounting, and DIN track mounting
Solid-state Timer H3JA Economical, Compact, Plug-in Timer Time limit, ON-delay, operation with automatic resetting. DIN size (36 x 36 mm), fits standard 8-pin sockets. Wide choice of supply voltages: 24,
AF09... AF30 3-pole Contactors up to 25 HP / 600 VAC
AF09... AF0 -pole Contactors up to 25 HP / 600 VAC Contactors and Overload Relays Overview.../0 AF09... AF0 -pole Contactors.../2 Main Technical Data.../8 Main Accessory Fitting Details.../2 Main Accessory.../24
TAE pole Contactors
TAE9...26 3-pole Contactors d.c. operated with double-winding coil SB8033C3 Utilisation TAE9 to TAE26 contactors are a compliment to the DC control contactor range. The coils have large voltage ranges
PCB Relay. Ordering Information. Surface Mounting DPDT Relay G6S
PCB Relay Surface Mounting DPDT Relay Long terminals for ideal for soldering and mounting reliability. Space-saving inside-l terminal. High dielectric strength between coil and contacts (2,000 VAC), and
Model Number Structure
Power Relay G7J Electromechanical Relays A High-capacity, High-dielectric-strength, Multi-pole Relay Used Like a Contactor Miniature hinge for maximum switching power for motor loads as well as resistive
Motors Automation Energy Transmission & Distribution Coatings. Automation Contactors - CWM Line
Motors Automation Energy Transmission & Distribution Coatings Automation Contactors - CWM Line 2 Contactores Compactos CWC0 Contactors - CWM Line Sumary Presentation Accessories Overview 5 Three-Pole Contactors
For Info: Phone: Fax:
Page -2 TWO POLES IEC rated current Ith: 20A (AC1) IEC operational power: 1.3kW (AC3 230V) Ideal for domestic applications. Page -2 THREE AND FOUR POLES IEC rated current Ith: 25A, 40A and 63A (AC1) IEC
Miniature microswitches - Positive break
1 Miniature microswitches - Positive break 81607 Coil spring snap-action mechanism with wiping contacts Positive opening action according to IEC 6097-5-1 Annex K atings from 10 ma Vc to 6 A 250 Va Very
The breakers offer thermal-magnetic trip protection according to Z and K characteristics.
Series High Performance Circuit Breakers Description The high performance MCB offers a compact solution to circuit protection. The devices are DIN rail mounted. The is available with application-specific
Low Voltage Switches. Switches Motorized change-over switches OTM _C
Low Voltage Switches Switches Motorized change-over switches OTM...12_C II I OTM 12_C Improves your permance OTM II I 0 OFF ON I 0 OFF II I ON I ssembly made easy Bridging bars quick wiring Tunnel terminals
FLAT/VERTICAL TYPE HIGH POWER BIFURCATED CONTACT
FLAT/VERTICAL TYPE HIGH POWER BIFURCATED CONTACT NC NC RELAYS Flat type Flat type (PC board) (PC board) FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic design achieves 10.9
Features. Type List A
Type List Terminal style PCB terminal A Contact form (SPNC) (SPNC) eatures Heavy duty 30A general purpose Power Relays. UL/CUL (UL 508 & 873), VDE safety approvals. Optional for open frame, dust cover,
AC 250V AC 250V AC 250V AC 250V DC 110V DC 110V DC 110V DC 110V Max. Allowable Current 15A 10A 10A 10A
Main Feature 1. 1 Pole to 4-Poles versions available with switching current at 15A (1 Pole) and 10A (2-4 Poles). 2. Printed Circuit Board Terminal, Plug-in Terminal and Flanged Case are designed for easy
RE48AML12MW time delay relay 2 functions s..300 h V AC - 2 OC
Characteristics time delay relay 2 functions - 0.02 s..300 h - 24..240 V AC - 2 OC Main Range of product Product or component type Electrical connection Discrete output type Contacts type and composition
Square D General Purpose Relays
Square D General Purpose Relays Class 0R plug-in relays 0RS (SPDT) 0RS (DPDT) 0RS3 (3PDT) 0RS (PDT) Catalog 0 Contents Class 0R plug-in relays bbspecifications....................................................