Distek Parts & Accessories. The New Evolution 6300

Transcription

1 Distek Parts & Accessories The New Evolution 6300

2 Distek Parts Accessories List 2 Table of Contents Disintegration Page 3 Dissolution Testing Pages 4-11 Fiber Optics Page 12 Friability Page 12 Hardness Page Media Prep Page 13 Sampling Pages UV-Vis Pages Fax-Back Quote Request Form Page 19 Please note, this is not a complete listing of Distek products, parts & accessories. If you don't see what you're looking for, give us a call. We'll be happy to assist you.

3 Disintegration Testing GD-2 Parts & Accessories Distek Parts Accessories List 3 EL Basket Rack Assembly,with Hanger and Rod EL Beaker Stand EL Beaker, Clear Glass 1L EL Bolus Tablet Basket Assembly, 3 Tube EL Bolus Tablet Basket Assembly, Single Tube EL Cover for 6 Tube Basket Assembly, 10 Mesh EL Cover for 6 Tube Basket Assembly, 40 Mesh EL Disintegration Tubes, Set of 6, Glass Operation Manual EL Plastic Disk, Set of 6 EL Plastic Disk, Set of 6 EL Water Bath with Sensor and Heater EL Bolus Tablet Basket for GD-2 GD-4 Parts & Accessories EL Basket Clamp EL Basket Rack Assembly, with Hanger and Rod EL Beaker, Clear Glass 1L EL Belt, XL-120 EL Bolus Basket Assembly, 3 Tube EL Bolus Tablet Basket Assembly, Single Tube EL Cover for 6 Tube Basket Assembly, 10 Mesh EL Disintegration Tubes, Set of 6, Glass EL Plastic Disk, Set of 6 EL Pulley, Drive Unit EL Silicon Tubing EL Tube with Choke, Green Illumination Model 3102, 3104, & 3106 Parts & Accessories Basket Assembly with 10 Mesh Screen Beaker, Clear Glass 1L Heating Assembly with Sensor, 110V Screen, 10 Mesh for Disintegration Basket Three Tube Bolus Basket with Fluted Disks Tube, 1" OD x 3.05", Glass "V" Shaped Beaker Centering Clip

4 Dissolution Testing Distek Parts Accessories List 4 Baskets SN 10 Mesh Basket Serialized Mesh Basket, G 10 Mesh Basket, Gold Coat H 10 Mesh Basket, Hard Coat Mesh Basket G 20 Mesh Basket, Gold Coat H 20 Mesh Basket, Hard Coat Mesh Basket G 40 Mesh Basket, Gold Coat H 40 Mesh Basket, Hard-Coat SN 40 Mesh Basket, Serialized SN 40 Mesh Basket, Serialized (set of 7) Mesh Basket and Adapter (No Shaft ) 40 Mesh Baskets (not shown to scale) Mesh Basket, for Evolution Series mesh basket and Adapter (No Shaft ) for Evolution series Mesh Basket G 100 Mesh Basket, Gold Coat H 100 Mesh Basket, Hard Coat Mesh Basket, H 150 Mesh Basket, Hard Coat Basket Adapters Mesh Basket H 250 Mesh Basket, Hard Coat Mesh Basket Mesh Basket Basket for Suppository Test Basket Adapters & Clips Adapter for Basket Adapter for Evolution Series Basket (Can only be used with basket, p/n ) Detachable Snap-on Basket Clip Capsule Sinkers Capsule Sinkers Basket with Clip on Lid, 316SS (Large) Basket with Clip on Lid, 316SS Turn Spiral, Magnetic Sinker, Epoxy Coated Turn Spiral, 316 SS Sinker, XL, Teflon Coated "S" Shaped Sinker, 316 SS Turn, 316 SS Turn, SS, Inert Coated Turn, SS, Inert Coated Prong Black Plastic Sinker Capsule Sinkers Prong Metallic Core Encased in Inert Plastic Sinker, Magnetic

5 Dissolution Testing Cables & Cords Cable, RS-232, 12 Ft. Long, Male to Female Cable, RS-232, 6 Ft. Long, Male to Female Cable, RS Power Cord, 6 Ft., 13 Amps, 125V, For Power Cord, 6 Ft., 15 Amps, 125V, For 5100 Distek Parts Accessories List 5 Fuses Fuse, 1/2 Amp, 250V, 2AG Used on Model 2100B/C MCM Fuse, 0.5A, 250V, F.B. for TCS Fuse, 8A 250V, Ceramic Fast Acting 5mm x 20mm, pk of 2, Used on TCS-0200C Fuse, 3A 250V 3AG Fast Acting, Used on 2100/A Intrinsic Dissolution Intrinsic Dissolution Apparatus - Paddle Over Stationary Disk. Includes 1 each of the following: Flat bottom glass vessel 1L, acculign ring, punch, die/plunger/cap assembly, wrench, and surface plate for pellet pressing Intrinsic Dissolution Apparatus - Paddle Over Stationary Disk. Includes 2 each of the following: Flat bottom glass vessel 1L, acculign ring, punch, die/plunger/cap assembly, and 1 ea. wrench and surface plate for pellet pressing Intrinsic Dissolution Apparatus - Paddle Over Stationary Disk. Includes 6 each of the following: Flat bottom glass vessel 1L, acculign ring, punch, die/plunger/cap assembly, and 1 ea. wrench and surface plate for pellet pressing E-Z Press Hydraulic Lab Press, 1 Ton Featuring built-in Polycarbonate Safety Shields and Lightweight, Ergonomic Design (weighs only 51 lbs.) E-Z Press Hydraulic Lab Press, 2 Ton Featuring built-in Polycarbonate Safety Shields and Lightweight, Ergonomic Design (weighs only 51 lbs.) E-Z Press Load Cell, 2000 lbs., 20 lb. increments Surface Plate for Instinsic Dissolution Apparatus Intrinsic Dissolution Apparatus Punch for Intrinsic Dissolution Apparatus Die for Intrinsic Dissolution Apparatus Seal Cap for Intrinsic Dissolution Apparatus Flat Head Screw for Intrinsic Dissolution Apparatus Washer for Intrinsic Dissolution Apparatus E-Z Press Hydraulic Lab Press Hex Nut for Intrinsic Dissolution Apparatus Gasket for Intrinsic Dissolution Apparatus

6 Dissolution Testing Distek Parts Accessories List 6 Kits Topical Drug Dissolution Cell, 15mm (1 ea. with hand tool) Topical Drug Dissolution Cells, 15mm(set of 6 with hand tool) Hand Tool for Topical Drug Dissolution Cell Apparatus #5 Disc Assembly (stainless steel support disc) Small Volume Conversion Kit, 100mL, Set of 6. Includes: 6 ea. of the following: 100mL glass dissolution vessels, mini paddles, vessel covers, deck adaptor plates, spindle spacer adapters, and mini shaft collars with thumb screws Small Volume Conversion Kit, 100mL, Single Position. Includes 1 ea. 100mL glass dissolution vessel, mini paddle, vessel cover, deck adaptor plate, spindle spacer adapter, and mini shaft collar with thumb screw Small Volume Conversion Kit, 200mL, Single Position. Includes 1 ea. 200mL glass dissolution vessel, mini paddle, vessel cover, deck adaptor plate, spindle spacer adapter, and mini shaft collar with thumb screw Small Volume Conversion Kit, 200mL, Set of 6. Includes: 6 ea. of the following: 200mL glass dissolution vessels, mini paddles, vessel covers, deck adaptor plates, spindle spacer adapters, and mini shaft collars with thumb screws Quad Stir Assembly for Distek Model 2100B/C- Allows 4 mini-vessel positions in one standard vessel position Back Light Kit VisiChek for Enhanced Visual Perspective and Observation of Tablets for Topical Drug Dissolution Cell Small Volume Conversion Kit Quad Stir Assembly VisiChek

7 Dissolution Testing Distek Parts Accessories List 7 Miscellaneous Parts & Accessories Acculign Ring for Vessel Centering and Prevention of Water Bath Evaporation Adapter Plate for Mini Vessel 100/200ml with Tubing Insert Ball Used on 5100 Cover/Door, SS, Pack of Basket Spacer for Paddle, 2100/A/B, No Hinge or Screws Black Rubber Bumper Block for Vessel Cover with O-ring Acculign Ring Brake Assembly with Knob for 2100 Series, Includes Shaft, Knob, and Lock-in Screw CalKey for Drive Coupling for Model 2100B/C Elbow Fitting, Inlet to 2100A/B/C and TCS- 0200/B/C Elbow Fitting, Outlet from Bottom of 2100A/B Extension Block for Quick-change Height Adjustment Knob, 5100 and 2100C Gasket Seal for Model 2100 Series Water Bath, 6 ft. length Heater Enclosure Assembly for 5100, 110V Height Knob for 5100 and 2100C Height Spacer for Paddle, 2100/A/B, No Hinge or Screws Holding Plate with Screw for Vessel Support Plate Hose Clamp for Waterbath, 1/2" OD Level, Tubular Manual for Model 2100B Manual, Operation for Mini-Shaft Adapter Assembly for O-Ring for Basket Adapter O-ring for Center Cap of Vessel Cover Outlet Filter for Bottom of 2100A/B Waterbath, 2 per pack Plug Module RS485, TCS Plug, Seventh Vessel Position ProduKey for PVC Shut Off Valve for 2100C Water Bath Rubber Grommet Used on 2100 Vessel Plate for TCS Probe Rubber Grommet Used on 5100 Calibration Probe Holster Screw, Nylon Used on Height Blocks for 2100A/B

8 Dissolution Testing Distek Parts Accessories List 8 Miscellaneous Parts & Accessories Screw, Nylon Used on Vessel Centering Arm Assembly Spring, Extension for Heater Jacket Temperature Calibration Probe for Thumb Screw Assembly for HeightChek and Mini Shaft Collars Vacuum Grease, 5.3oz Vessel Centering Arm Assembly Vessel Centering Arm Bracket for Vessel Plate Adapter 4L to 1L Vessel Retainer Assembly Vessel Retainer Assembly for 2100 Paddle Blades Paddle Blade, SN Paddle Blade, Serialized Paddle Blade, Hard Coat Paddle Blade, Plastic Paddle Blade, Teflon Coat Printer & Printer Cables Printer Cable Printer Cable, Parallel Port, 6ft Printer Sharing Box for Model 5100 Allows up to 4 Model 5100's to print to one printer. Includes; printer sharing box with 1ea 6" interface cable, 10' printer cable, and ribbon cable, and HP InkJet printer Printer, HP InkJet - requires printer cable p/n Cable Pair for Printer Sharing Box ( ). Includes interface cable for Model 5100 to printer sharing box and modified ribbon cable. Requires 1 hour of labor for field upgrades Paddle Blade Printer Sharing Box with Cables Pulleys Pulley, 1/2" ID for 2100 Series Pulley, 1/2" ID for 5100 Drive Motor Pulley, 5/8" ID Black for 2100c and Pulley, 5/8" ID for 2100 Series

9 Dissolution Testing Distek Parts Accessories List 9 Shafts- For use with Baskets or Paddles (2100 Series) Shaft T Shaft, Teflon Coated Shaft, Serialized Shaft, Extended Length for 2 Liter Systems Shaft and Basket Adapter Only (2100 Series) Standard Length Shaft Shaft and Basket Adapter G Shaft and Basket Adapter, Gold Plated Extended Length Shaft with Basket Adapter Shaft and Basket and Adapter Assembly (2100 Series) Shaft and 10 Mesh Basket Assembly Serialized Shaft and 40 Mesh Basket Assembly Extended Length Shaft and 40 Mesh Basket Assembly Shaft and 40 Mesh Basket Assembly Shaft and 40 Mesh Basket Assembly, Set of Shaft and 40 Mesh Basket Assembly (Without Knurled Ring) Shaft and 40 Mesh Basket Assembly (Without Knurled Ring), Set of Mini Shaft with 100 Mesh Basket Assembly Mini Shaft, Basket Adapter, and 40 Mesh Basket, Set of Mini Shaft, Basket Adapter, and 40 Mesh Basket Standard Length Shaft with Basket Adapter Standard Length Shaft with 40 Mesh Basket & Adapter Shaft and Paddle- Non-Detachable (2100 Series) Shaft and Paddle Shaft and Paddle, Set of Shaft and Paddle, Serialized Shaft and Paddle, Teflon Coated Shaft and Paddle, Teflon Coated, Set of H Shaft and Paddle, Hard Coat Standard Length Shaft & Paddle H 6 Shaft and Paddle, Hard Coat, Set of Shaft and Paddle with Plastic Sleeve on the Shaft and a Plastic Paddle Blade Shaft and Paddle, with Plastic Sleeve on the Shaft and a Plastic Paddle Blade, Set of Shaft and Paddle, Extended Length Shaft and Paddle, Extended Length, Set of Shaft and Paddle, Extended Length, Teflon Coated H Shaft and Paddle, Extended Length, Hard Coat Standard Length Shaft & Paddle, Teflon Coated

10 Dissolution Testing Distek Parts Accessories List 10 Shaft and Paddle- Non-Detachable (2100 Series) Shaft with Pin Type Paddle Blade Assembly Shaft, Extended Length, with Pin Type Paddle Blade Mini-Paddle and Shaft for 100/200ml Dissolution Vessel, Includes Adapter Mini-Paddle and Shaft for 100/200ml Dissolution Vessel, Includes Adapter, Set of 6 Shaft Collars Shaft Collar Assembly for 2100 Series Shaft Collar with Allen Key Locking for 5100 and 2100C Deluxe Extended Length Shaft & Paddle Thermocirculator TCS-0200C Thermocirculator 110V T TCS-0200C with Adapter Tubing For Connection to Model 2100, 2100A, and 2100B Tubing Tubing For TCS-0200C Connection to Model 2100, 2100A, and 2100B Tubing Kit for Model 2100B Double Bath Configuration Hose, Clear Tubing 1/2" ID, Per Foot Hose, Clear Tubing 5/8" ID, Per Foot Bath Tubing, Single Set for 2100B Shaft Collars Validation Tools CenterChek Model Flat Tip Adapter for Wobble Meter Runout Gauge Validation Tool Kit Height Adjustment Ball 2.5cm HeightChek Model Reflective Stickers for Use with Optical Tachometer, Price Per Foot ShaftChek Tachometer, Contact Tachometer, Optical TempChek Tip, Nylon for CenterChek Validation Kit: Includes Contact Tachometer, CenterChek, HeightChek, and Wobblemeter Validation Kit: Includes Optical Tachometer, CenterChek, HeightChek, and Wobblemeter VesselChek VibraChek Wobblemeter Runout Gauge TempChek

11 Dissolution Testing Distek Parts Accessories List 11 Vessels Vessel, Premiere, Serialized, 1L Clear Glass Vessel, Serialized, 1L, Clear Glass Vessel, Serialized, 1L, Clear Glass, Set of Vessel, Amber, 1L Vessel, Amber, 1L set of Vessel, 2 Liter, Clear Glass Vessel, Amber, 2L Vessel for Intrinsic Dissolution Apparatus, Flat Bottom Plastic Dissolution Vessel, 1L with Feet Mini Vessel, 200ml, Teflon Coat Vessel Cover Mini-Vessel, 100ml, Clear Glass Mini-Vessel, 200ml Flat Bottom, Clear Glass Mini-Vessel, 200ml, Clear Glass Vessel Covers Vessel Cover, Clear Acrylic with 3 Probe Holes, Small Center Hole Vessel Cover, Clear Acrylic with 3 Probe Holes, Small Center Hole, Set of Vessel Cover, Clear Acrylic with Three Probe Holes and Large Center Hole for Basket and Shaft. Includes Center Cap and O-ring Vessel Cover, Clear Acrylic with Three Probe Holes and Large Center Hole for Basket and Shaft. Includes Center Cap and O-ring, Set of Vessel Cover, Black Polypropoylene Vessel Cover, Black Polypropoylene Set of Mini Vessel Cover and Knob Assembly for 100/200ml Vessels Vessel Cover Hole Plug Water Bath Water Bath for 2100C, Includes Tubing and Fittings Water Bath for 2100A Vessel Cover with Basket Access Vessel Cover, Black Polypropylene

12 Distek Parts Accessories List 12 Fiber Optics Opt-Diss Parts & Accessories Adapter, 900ml for Opt Diss Fiber Optic Probe 10mm Pathlength for Opt-Diss Fiber Optic Probe 1mm Pathlength for Opt-Diss Fiber Optic Probe 2mm Pathlength for Opt-Diss Fiber Optic Probe 5mm Pathlength for Opt-Diss Standard Cover for Opt Diss Tank for Standardization of Arch Probes OPT Universal Vessel Cover for Opt Diss, Includes Spacer Adaptors for 900ml Probe Depth. Friability DF-1W & DF-3 Parts & Accessories EL M Abrasion Drum for DF-3 EL M Drum Pin for DF-3, Set of 5 EL M Drum Spacer, Set of 2 for DF-3 EL M Friability Drum for DF-3 EL M Knob for DF-3 EL M Legs, Set of 2 for DF Manual, Operation for DF-1W Manual, Operation for DF-3 EL M Pulley, Timing for DF-3 EL M Timing Belt for DF-3 EL M Tray for DF-3, Set of 2 Hardness HT-500 Parts & Accessories HT500-Option 4 Collection Container for HT 500 HT500-Paper Paper Roll for Model HT 500 HT500-Print Print Head for Model HT 500 Head HT500-Ribbon Printer Ribbon for Model HT Weight, 10kg - Class 4 Grip Handle with NIST Certification Weight, 10kg - Class F Grip Handle with NIST Certification HC-97 Parts & Accessories Shield, Plexiglass for HC-97

13 Distek Parts Accessories List 13 Hardness Weights and Gauge Block Gauge Block, NIST 20 mm with Calibration Certificate Weight, 10kg - Class 4 Grip Handle with NIST Certification Weight, 10kg - Class F Grip Handle with NIST Certification Weight, 5kg - Class 4 Cylindrical Weight with NIST Certification Weight, 5kg with NIST Certification-Class F Media Prep DissoPrep X-8 Parts & Accessories Input Filter Cartridge for Disso Prep X8, 20um, 5 per pack Lab Cart, Rolling for Disso Prep X8 Requires assembly by customer or Distek representative for an additonal fee DPXFilter-PP1 Media inlet filter for Disso Prep X8 DPX Media outlet filter for Disso Prep X Remote Nozzle for DisoPrep X8, includes dispense hose and control cable DSX Vessel Rack, 4 Position with Dispensing Track for the Model Disso Prep X Water Hook Up Kit for Disso Prep X DSX Vessel Rack for DissoPrep X8 Model MD-1 & 2302 Parts & Accessories Filter, Glass for MD-1 Vacuum Pump Filter, Inlet with J G Connector for Tip of MD-1 Inlet Tube, 3 per pack Filter, In-Line for MD-1 Inlet Tube Filter, Vacuum Silencer for MD Fuse 3.15A 440V Used on Heated Tank Microswitch for MD-1, Vessel in Place Switch Vessel Rack, 3 Position for Model MD Fuse 0.5A 440V for Model 2302

14 Distek Parts Accessories List 14 Sampling Filter Disks Filter Disks, 10 Micron with Hole, 1000 per pack Filter Disks, 10 Micron, 1000 per pack Filter Disks, 45 Micron, 1000 per pack Fittings & Connectors Coupling, 1/4 x 28 Thread Elbow, Male to Female Ferrule, Blue Fitting, 1/2" x 1/2" Barbed Fitting, 2 Piece Adapter for Fitting, Black, 1/4 x 28 Thread Fitting, Blue, 1/4 x 28 Thread Fitting, Clear/White, 1/4 x 28 Thread Fitting, Coupling Fitting, Female Adapter 1/2" Used on 2100 In- Line Filter Fitting, Green, 1/4 x 28 Thread Sampling Probe with Accessories Fitting, Red 1/4 x 28 Thread Fitting, Reducer TCS0200/A/B Pump Outlet Fitting, Yellow, 1/4 x 28 Thread Luer Adapter, Female Luer Adapter, Male Sampling Probes mL Sampling Probe mL Sampling Probe mL Sampling Probe, for use with 2L Vessel mL Sampling Probe, Hard Coat mL Sampling Probe, Lower Portion, mL Sampling Probe, Solid Housing mL Sampling Probe mL Sampling Probe, for use with 2L Vessel mL Sampling Probe, Lower Portion Only mL Sampling Probe, Solid Housing mL Sampling Probe mL Sampling Probe mL Sampling Probe, Hard Coat ml Sampling Probe, for use with 2L Vessel mL Sampling Probe, Hard Coat, set of mL Sampling Probe, Lower Portion Only mL Sampling Probe, Solid Housing mL Sampling Probe mL Sampling Probe, for use with 2L Vessel mL Sampling Probe, Lower Portion Only

15 Distek Parts Accessories List 15 Sampling Sampling Probes mL Sampling Probe, Solid Housing mL Sampling Probe mL Sampling Probe, Lower Portion Only mL Sampling Probe, Solid Housing O-ring for Sampling Probe Probe Plug with O-ring Return probe Tubing Pump Tubing Assembly for Model 2230A, Includes Periprene Tubing X Pump Tubing Assembly for Model 2230A, without Periprene Tubing Pump Tubing Only for Model 2230A, Periprene, Set Teflon Tubing,.030" ID,.062 OD Per Foot Waste Tubing for 2230A, 6 Feet Periprene Pump Tubing for 2230A Test Tubes Test Tube, 13mm x 100mm Glass Test Tubes 13mm x 100mm - Plastic (pkg. of 500) Test Tubes, 13mm x 100mm Glass (pkg. of 72) Miscellaneous Model 2230 Parts & Accessories Autosampler Shuttle, Black Collection Rack Set for 2230, includes 19 White and 1 Red Pump Tubing Assembly for 2230A Includes Perprene Tubing Diverter Tray for 2230A Diverter Tray for Media Recycling for 2230A-MRM Drop Former for Drop Former Holder, Back position, with Three Thumbscrews Evaporation Cover for 6 Position Evaporation Plate Support, Set of HPLC Vial Adapters - 2ml (6 per set) Manual, Operation for Power Cord, 6 Ft., 10 Amps, 125V, For 2230A Pump Cassette Assembly for 2230A Rack Sensor Assembly for Model 2230A Space Saver Shelf for Model 2230A Sampler Spring for Rack Sensor Assembly Spring, Cassette for Test Tube Rack for 2230A, Red Test Tube Rack for 2230A, White Tubing Guide for 2230A Vial Adapter, HPLC 6 Position, 4ml Fuse, 3AG, 250V, 3/4A, Slo Blo for Model 2230

16 Distek Parts Accessories List 16 Sampling Miscellaneous Model DS 4300 Parts & Accessories Check Valve, Dual Male Luer - Female Luer, Slip Fit HPLC Vial Rack for Model DS-4300 (8 x 16 rows) for Single Bath Configuration. Must order quantity 2 for dual bath configuration Pooling Sample Containers, 75ml for DS Space Saver Shelving Unit for DS Syringe Filter Sampling Probe Assembly Includes checkvalve, fitings, couplings, and return probe. Assembly does not include syringe filters. Must quote appropriate solid housing sampling probe Test Tube Rack for Model DS-4300 (8 x 16 rows) for Single Bath Configuration. Must order quantity 2 for dual bath configuration Space Saver Rack for DS Syringe Filter Probe Assembly Test Tube Rack Vial Rack

17 Distek Parts Accessories List 17 UV-Vis Flow-Through Cells with Round Aperture, Screw Fitting Connections Flow Cell, 10 mm Path Length, Volume 30µl Flow Cell, 10 mm Path Length, Volume 80µl Flow-Through Cells with Rectangular Aperture, Screw Fitting Connections Flow Cell, 1mm Path Length, Volume 62µl Flow Cell, 2mm Path Length, Volume 124µl Flow Cell, 5mm Path Length, Volume 230µl (NEW) Flow Cell, 10mm Path Length, Volume 390µl Flow Cell, 10mm Path Length, Volume 160µl Flow-Through Cells with Oval Aperture, Screw Fitting Connections Flow Cell, 1mm Path Length, Volume 40µl Flow Cell, 2mm Path Length, Volume 80µl Flow Cell, 5mm Path Length, Volume 200µl Flow Cell, 10mm Path Length, Volume 430µl Flow Cell, 1mm Path Length, Volume 40µl (NEW) Lamps G Tungsten Lamp Assembly Deuterium Lamp Assembly Miscellaneous /16" PEEK fittings for 8 port valve, 10pk Cassette, Variable Pressure Controller GPIO Cable Cell passivating and cleaning fluid, 1000mL Crossover Ethertwist Cable, 10 ft., Can be used to connect chemstation to a networked instrument Caffeine Sample Solution, 1 Liter for flow and cross contamination tests Communication Driver for Agilent UV/Vis Chemstation Enables control and monitoring of Distek Dissolution Instrument via the 8453 UV dissolution software 89068D Automated Sipper System for Model Multicell Transport Adjustment Tool Drive Assembly Pressure Wheel Assembly Tefzel ferrules and SS lock rings 10pk for 1/16" o.d. tubing

18 Distek Parts Accessories List 18 UV-Vis Tubing mm i.d. Tygon peri-pump tubing for 8453 multi-channel pump (12/pk.) Multicell Tubing Kit Valve Tubing Kit for One Bath Standards Kits OQ/PV Standards Kit (1) for UV/VIS OQ/PV Standards Kit (2) for UV/VIS

19 To: Distek Inc., Sales Department Fax: Distek Inc. 121 North Center Drive North Brunswick, NJ Phone: Fax: Fax-Back Quotation Request Form Directions: Simply fill out this form in its entirety, fax back to Distek, and a quotation will be issued to you within 48 hours. You may want to keep copies of this form on hand to expedite future orders. Name Address Company Phone Fax QTY. Part# Description Please visit us on the web at