VHM.81(W), VHM.82(W) VHM.84(W), VHM.85(W)
|
|
|
- Mitchell Jenkins
- 5 years ago
- Views:
Transcription
1 Joge Werkzeugtechik VHM.81(W), VHM.82(W) VHM.84(W), VHM.85(W) Uiversal High-Performace Ed Mills for machiig steel 1
2 The Tools The ew group of uiversal ed mills type 81,82,84,85 has bee especially developed for roughig ad fiishig of steel ad cast materials. The all-roud programme icludes flat-shaped ad spherical ed mills i two legth versios ad with differet umber of cuttig edges. The flat-shaped ed mills are available i versios with two, three or four cuttig edges. The spherical ed mills - with two or four cuttig edges. The tools are available with ø2 to 20mm. The tools with ø2-5mm are available with cylidrical shak made to IN 6535-HA. The tools with ø6-20mm are available with clampig shak made to IN 6535-HB. ue to the all-roud ad uiversal structure of the programme, it provides optimal tools for almost ay machiig process. The iovative ew coatig TN12 is made of fiest grai carbide i the ISO-rage K30-40 with a ewly developed coatig AlCrN for highest cuttig parameters ad logest tool life at the same time. Product characteristics Characteristic VHM.81(W), VHM.82(W) VHM.84(W), VHM.85(W) Face geometry Cuttig edges over ceter Flat-shaped => suitable for roughig ad fiishig => suitable for drillig => stabilisatio of cuttig edges by face groves Suitable for pluge millig For = 2 - to 0.75 x For = 3 - to 0,50x For = 4 - to 0,25x Spherical => suitable for roughig ad fiishig Couplig shak Twist agle 45 Optimised macro geometry Optimised micro geometry Carbide Coatig Carbide + coatig = Type TN12 Regridig capability of the tools For diameter ø2 - ø5 cylidrical shak made to IN 6535-HA For diameters ø6 - ø20 Weldo shak made to IN 6535-HB => stable tool holder => smooth ruig => excellet surface quality Positive chip geometry i combiatio with a high spiral agle => mild cuttig maer Logest tool life Fiest grai carbide i the ISO-rage K30-40 High teacity with very high wear resistace AlCrN Fiest layer structure High oxidatio stability For machiig all commo steel ad cast iro materials Suitable for wet machiig, dry machiig ad mi. lubricat grease High cost-beefit-factor 2
3 Idex Flat-shaped tools VHM 281(W) TN12 VHM 282(W) TN12 VHM 381(W) TN12 VHM 382(W) TN12 VHM 481(W) TN12 VHM 482(W) TN12 HRC 48 HRC 48 HRC 48 HRC 48 HRC 48 HRC 48 Page Spherical tools VHM 284(W) TN12 VHM 285(W) TN12 VHM 484(W) TN12 VHM 485(W) TN12 HRC 48 HRC 48 HRC 48 HRC Stahl, Steel, Acier, Acciaio Edelstahl, High grade steel, Acier ioxydable, Acciaio iossidabile Gusseise, Cast iro, Fote, Ghisa NE-Metalle, Kuststoffe, No-ferrous metals ad plastics, Métaux o-ferreux et matières plastiques, Metalli o-ferritici e materiali plastici hochwarmfeste ie, Highly heat-resistat materials, Matières réfractaires, i resistete al calore gehärteter Stahl, Tempered steel, Aciers traités, Acciaio temprato Schruppe, Roughig, Ébauche, Sgrossatura Vorschlichte, Pre-fiishig, Semi-fiitio, Pre-fiitura Schlichte, Fiishig, Fiitio, Fiitura 3
4 Techical ata VHM 281(W) TN12 Tolerace ø2,0-20,0= -0,02-0,04 45 ø2-5 IN 6535-HA ø6-20 IN 6535-HB Order-No. l N d 1 d L VHM TN VHM TN VHM TN , VHM TN , VHM 281W-06 TN , VHM 281W-08 TN , VHM 281W-10 TN , VHM 281W-12 TN , VHM 281W-16 TN , VHM 281W-20 TN , ormal legth versio = VHM 282(W) TN12 -> see ext page 4
5 Cuttig ata Recommedatio VHM 281(W) TN12 High grade steel High alloyed steel [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,070 (0,050-0,090) 15 4, , ( ) 0,110 (0,090-0,130) 20 6, , ( ) 0,150 (0,130-0,170) 25 8, , ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,070 (0,050-0,090) 15 4, , ( ) 0,110 (0,090-0,130) 20 6, , ( ) 0,150 (0,130-0,170) 25 8, , ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,070 (0,050-0,090) 15 4, , ( ) 0,110 (0,090-0,130) 20 6, , ( ) 0,150 (0,130-0,170) 25 8, , ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,070 (0,050-0,090) 15 4, , ( ) 0,110 (0,090-0,130) 20 6, , ( ) 0,150 (0,130-0,170) 25 8, ,0 [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,007 (0,005-0,027) , ( ) 0,007 (0,005-0,027) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,060 (0,040-0,080) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,007 (0,005-0,027) , ( ) 0,007 (0,005-0,027) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,060 (0,040-0,080) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,007 (0,005-0,027) , ( ) 0,007 (0,005-0,027) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,060 (0,040-0,080) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) ,2 For drillig operatios, we recommed to reduce (feed speed per tooth) by 50% compared to full slot millig 5
6 Techical ata VHM 282(W) TN12 Tolerace ø2,0-20,0= -0,02-0,04 45 ø2-5 IN 6535-HA ø6-20 IN 6535-HB Order-No. l N d 1 d L VHM TN VHM TN VHM TN , VHM TN , VHM 282W-06 TN , VHM 282W-08 TN , VHM 282W-10 TN , VHM 282W-12 TN , VHM 282W-16 TN , VHM 282W-20 TN , short legth versio = VHM 281(W) TN12 -> see previous page 6
7 Cuttig ata Recommedatio VHM 282(W) TN12 High grade steel High alloyed steel [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 0, , ( ) 0,020 (0,005-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 1, , ( ) 0,030 (0,010-0,050) 18 1, , ( ) 0,040 (0,020-0,060) 21 2, , ( ) 0,050 (0,030-0,070) 23 2, , ( ) 0,070 (0,050-0,090) 25 3, , ( ) 0,110 (0,090-0,130) 33 4, , ( ) 0,150 (0,130-0,170) 37 5, , ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 0, , ( ) 0,020 (0,005-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 1, , ( ) 0,030 (0,010-0,050) 18 1, , ( ) 0,040 (0,020-0,060) 21 2, , ( ) 0,050 (0,030-0,070) 23 2, , ( ) 0,070 (0,050-0,090) 25 3, , ( ) 0,110 (0,090-0,130) 33 4, , ( ) 0,150 (0,130-0,170) 37 5, , ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 0, , ( ) 0,020 (0,005-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 1, , ( ) 0,030 (0,010-0,050) 18 1, , ( ) 0,040 (0,020-0,060) 21 2, , ( ) 0,050 (0,030-0,070) 23 2, , ( ) 0,070 (0,050-0,090) 25 3, , ( ) 0,110 (0,090-0,130) 33 4, , ( ) 0,150 (0,130-0,170) 37 5, , ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 0, , ( ) 0,020 (0,005-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 1, , ( ) 0,030 (0,010-0,050) 18 1, , ( ) 0,040 (0,020-0,060) 21 2, , ( ) 0,050 (0,030-0,070) 23 2, , ( ) 0,070 (0,050-0,090) 25 3, , ( ) 0,110 (0,090-0,130) 33 4, , ( ) 0,150 (0,130-0,170) 37 5, ,1 [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,007 (0,005-0,027) , ( ) 0,007 (0,005-0,027) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,060 (0,040-0,080) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,007 (0,005-0,027) , ( ) 0,007 (0,005-0,027) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,060 (0,040-0,080) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,007 (0,005-0,027) , ( ) 0,007 (0,005-0,027) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,060 (0,040-0,080) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) ,2 For drillig operatios, we recommed to reduce (feed speed per tooth) by 50% compared to full slot millig 7
8 Techical ata VHM 381(W) TN12 Tolerace ø2,0-20,0= -0,02-0,04 45 ø2-5 IN 6535-HA ø6-20 IN 6535-HB Order-No. l N d 1 d L VHM TN VHM TN VHM TN , VHM TN , VHM 381W-06 TN , VHM 381W-08 TN , VHM 381W-10 TN , VHM 381W-12 TN , VHM 381W-16 TN , VHM 381W-20 TN , ormal legth versio = VHM 382(W) TN12 -> see ext page 8
9 Cuttig ata Recommedatio VHM 381(W) TN12 High grade steel High alloyed steel [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,070 (0,050-0,090) 15 4, , ( ) 0,110 (0,090-0,130) 20 6, , ( ) 0,150 (0,130-0,170) 25 8, , ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,070 (0,050-0,090) 15 4, , ( ) 0,110 (0,090-0,130) 20 6, , ( ) 0,150 (0,130-0,170) 25 8, , ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,070 (0,050-0,090) 15 4, , ( ) 0,110 (0,090-0,130) 20 6, , ( ) 0,150 (0,130-0,170) 25 8, , ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,070 (0,050-0,090) 15 4, , ( ) 0,110 (0,090-0,130) 20 6, , ( ) 0,150 (0,130-0,170) 25 8, ,0 [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,007 (0,005-0,027) , ( ) 0,007 (0,005-0,027) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,060 (0,040-0,080) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,007 (0,005-0,027) , ( ) 0,007 (0,005-0,027) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,060 (0,040-0,080) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,007 (0,005-0,027) , ( ) 0,007 (0,005-0,027) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,060 (0,040-0,080) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) ,0 For drillig operatios, we recommed to reduce (feed speed per tooth) by 50% compared to full slot millig 9
10 Techical ata VHM 382(W) TN12 Tolerace ø2,0-20,0= -0,02-0,04 45 ø2-5 IN 6535-HA ø6-20 IN 6535-HB Order-No. l N d 1 d L VHM TN VHM TN VHM TN , VHM TN , VHM 382W-06 TN , VHM 382W-08 TN , VHM 382W-10 TN , VHM 382W-12 TN , VHM 382W-16 TN , VHM 382W-20 TN , short legth versio = VHM 381(W) TN12 -> see previous page 10
11 Cuttig ata Recommedatio VHM 382(W) TN12 High grade steel High alloyed steel [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 0, , ( ) 0,020 (0,005-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 1, , ( ) 0,030 (0,010-0,050) 18 1, , ( ) 0,040 (0,020-0,060) 21 2, , ( ) 0,050 (0,030-0,070) 23 2, , ( ) 0,070 (0,050-0,090) 25 3, , ( ) 0,110 (0,090-0,130) 33 4, , ( ) 0,150 (0,130-0,170) 37 5, , ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 0, , ( ) 0,020 (0,005-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 1, , ( ) 0,030 (0,010-0,050) 18 1, , ( ) 0,040 (0,020-0,060) 21 2, , ( ) 0,050 (0,030-0,070) 23 2, , ( ) 0,070 (0,050-0,090) 25 3, , ( ) 0,110 (0,090-0,130) 33 4, , ( ) 0,150 (0,130-0,170) 37 5, , ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 0, , ( ) 0,020 (0,005-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 1, , ( ) 0,030 (0,010-0,050) 18 1, , ( ) 0,040 (0,020-0,060) 21 2, , ( ) 0,050 (0,030-0,070) 23 2, , ( ) 0,070 (0,050-0,090) 25 3, , ( ) 0,110 (0,090-0,130) 33 4, , ( ) 0,150 (0,130-0,170) 37 5, , ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 0, , ( ) 0,020 (0,005-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 1, , ( ) 0,030 (0,010-0,050) 18 1, , ( ) 0,040 (0,020-0,060) 21 2, , ( ) 0,050 (0,030-0,070) 23 2, , ( ) 0,070 (0,050-0,090) 25 3, , ( ) 0,110 (0,090-0,130) 33 4, , ( ) 0,150 (0,130-0,170) 37 5, ,7 [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,007 (0,005-0,027) , ( ) 0,007 (0,005-0,027) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,060 (0,040-0,080) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,007 (0,005-0,027) , ( ) 0,007 (0,005-0,027) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,060 (0,040-0,080) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,007 (0,005-0,027) , ( ) 0,007 (0,005-0,027) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,060 (0,040-0,080) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) ,2 For drillig operatios, we recommed to reduce (feed speed per tooth) by 50% compared to full slot millig 11
12 Techical ata VHM 481(W) TN12 Tolerace ø2,0-20,0= -0,02-0,04 45 ø2-5 IN 6535-HA ø6-20 IN 6535-HB Order-No. l N d 1 d L VHM TN VHM TN VHM TN , VHM TN , VHM 481W-06 TN , VHM 481W-08 TN , VHM 481W-10 TN , VHM 481W-12 TN , VHM 481W-16 TN , VHM 481W-20 TN , ormal legth versio = VHM 482(W) TN12 -> see ext page 12
13 Cuttig ata Recommedatio VHM 481(W) TN12 High grade steel High alloyed steel [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,070 (0,050-0,090) 15 4, , ( ) 0,110 (0,090-0,130) 20 6, , ( ) 0,150 (0,130-0,170) 25 8, , ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,070 (0,050-0,090) 15 4, , ( ) 0,110 (0,090-0,130) 20 6, , ( ) 0,150 (0,130-0,170) 25 8, , ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,070 (0,050-0,090) 15 4, , ( ) 0,110 (0,090-0,130) 20 6, , ( ) 0,150 (0,130-0,170) 25 8, , ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,070 (0,050-0,090) 15 4, , ( ) 0,110 (0,090-0,130) 20 6, , ( ) 0,150 (0,130-0,170) 25 8, ,0 [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,007 (0,005-0,027) , ( ) 0,007 (0,005-0,027) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,060 (0,040-0,080) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,007 (0,005-0,027) , ( ) 0,007 (0,005-0,027) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,060 (0,040-0,080) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,007 (0,005-0,027) , ( ) 0,007 (0,005-0,027) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,060 (0,040-0,080) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) ,0 For drillig operatios, we recommed to reduce (feed speed per tooth) by 50% compared to full slot millig 13
14 Techical ata VHM 482(W) TN12 Tolerace ø2,0-20,0= -0,02-0,04 45 ø2-5 IN 6535-HA ø6-20 IN 6535-HB Order-No. l N d 1 d L VHM TN VHM TN VHM TN , VHM TN , VHM 482W-06 TN , VHM 482W-08 TN , VHM 482W-10 TN , VHM 482W-12 TN , VHM 482W-16 TN , VHM 482W-20 TN , short legth versio = VHM 481(W) TN12 -> see previous page 14
15 Cuttig ata Recommedatio VHM 482(W) TN12 High grade steel High alloyed steel [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 0, , ( ) 0,020 (0,005-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 1, , ( ) 0,030 (0,010-0,050) 18 1, , ( ) 0,040 (0,020-0,060) 21 2, , ( ) 0,050 (0,030-0,070) 23 2, , ( ) 0,070 (0,050-0,090) 25 3, , ( ) 0,110 (0,090-0,130) 33 4, , ( ) 0,150 (0,130-0,170) 37 5, , ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 0, , ( ) 0,020 (0,005-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 1, , ( ) 0,030 (0,010-0,050) 18 1, , ( ) 0,040 (0,020-0,060) 21 2, , ( ) 0,050 (0,030-0,070) 23 2, , ( ) 0,070 (0,050-0,090) 25 3, , ( ) 0,110 (0,090-0,130) 33 4, , ( ) 0,150 (0,130-0,170) 37 5, , ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 0, , ( ) 0,020 (0,005-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 1, , ( ) 0,030 (0,010-0,050) 18 1, , ( ) 0,040 (0,020-0,060) 21 2, , ( ) 0,050 (0,030-0,070) 23 2, , ( ) 0,070 (0,050-0,090) 25 3, , ( ) 0,110 (0,090-0,130) 33 4, , ( ) 0,150 (0,130-0,170) 37 5, , ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 0, , ( ) 0,020 (0,005-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 1, , ( ) 0,030 (0,010-0,050) 18 1, , ( ) 0,040 (0,020-0,060) 21 2, , ( ) 0,050 (0,030-0,070) 23 2, , ( ) 0,070 (0,050-0,090) 25 3, , ( ) 0,110 (0,090-0,130) 33 4, , ( ) 0,150 (0,130-0,170) 37 5, ,3 [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,007 (0,005-0,027) , ( ) 0,007 (0,005-0,027) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,060 (0,040-0,080) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,007 (0,005-0,027) , ( ) 0,007 (0,005-0,027) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,060 (0,040-0,080) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,007 (0,005-0,027) , ( ) 0,007 (0,005-0,027) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,060 (0,040-0,080) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) ,7 For drillig operatios, we recommed to reduce (feed speed per tooth) by 50% compared to full slot millig 15
16 Techical ata VHM 284(W) TN12 Tolerace ø2,0-20,0= -0,02-0,04 45 ø2-5 IN 6535-HA ø6-20 IN 6535-HB Order-No. l N d 1 d L VHM TN VHM TN VHM TN , VHM TN , VHM 284W-06 TN , VHM 284W-08 TN , VHM 284W-10 TN , VHM 284W-12 TN , VHM 284W-16 TN , VHM 284W-20 TN , ormal legth versio = VHM 285(W) TN12 -> see ext page 16
17 Cuttig ata Recommedatio VHM 284(W) TN12 High grade steel High alloyed steel [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,050 (0,030-0,070) 15 5, , ( ) 0,110 (0,090-0,130) 20 7, , ( ) 0,150 (0,130-0,170) 25 9, , ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,050 (0,030-0,070) 15 5, , ( ) 0,110 (0,090-0,130) 20 7, , ( ) 0,150 (0,130-0,170) 25 9, , ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,050 (0,030-0,070) 15 5, , ( ) 0,110 (0,090-0,130) 20 7, , ( ) 0,150 (0,130-0,170) 25 9, , ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,050 (0,030-0,070) 15 5, , ( ) 0,110 (0,090-0,130) 20 7, , ( ) 0,150 (0,130-0,170) 25 9, ,4 [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,010 (0,005-0,030) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,020 (0,005-0,040) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,010 (0,005-0,030) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,020 (0,005-0,040) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,010 (0,005-0,030) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,020 (0,005-0,040) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) ,0 For drillig operatios, we recommed to reduce (feed speed per tooth) by 50% compared to full slot millig 17
18 Techical ata VHM 285(W) TN12 Tolerace ø2,0-20,0= -0,02-0,04 45 ø2-5 IN 6535-HA ø6-20 IN 6535-HB Order-No. l N d 1 d L VHM TN VHM TN VHM TN , VHM TN , VHM 285W-06 TN , VHM 285W-08 TN , VHM 285W-10 TN , VHM 285W-12 TN , VHM 285W-16 TN , VHM 285W-20 TN , short legth versio = VHM 284(W) TN12 -> see previous page 18
19 Cuttig ata Recommedatio VHM 285(W) TN12 High grade steel High alloyed steel [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 1, , ( ) 0,020 (0,005-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 2, , ( ) 0,030 (0,010-0,050) 18 2, , ( ) 0,040 (0,020-0,060) 21 3, , ( ) 0,050 (0,030-0,070) 23 4, , ( ) 0,050 (0,030-0,070) 25 5, , ( ) 0,110 (0,090-0,130) 33 7, , ( ) 0,150 (0,130-0,170) 37 9, , ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 1, , ( ) 0,020 (0,005-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 2, , ( ) 0,030 (0,010-0,050) 18 2, , ( ) 0,040 (0,020-0,060) 21 3, , ( ) 0,050 (0,030-0,070) 23 4, , ( ) 0,050 (0,030-0,070) 25 5, , ( ) 0,110 (0,090-0,130) 33 7, , ( ) 0,150 (0,130-0,170) 37 9, , ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 1, , ( ) 0,020 (0,005-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 2, , ( ) 0,030 (0,010-0,050) 18 2, , ( ) 0,040 (0,020-0,060) 21 3, , ( ) 0,050 (0,030-0,070) 23 4, , ( ) 0,050 (0,030-0,070) 25 5, , ( ) 0,110 (0,090-0,130) 33 7, , ( ) 0,150 (0,130-0,170) 37 9, , ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 1, , ( ) 0,020 (0,005-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 2, , ( ) 0,030 (0,010-0,050) 18 2, , ( ) 0,040 (0,020-0,060) 21 3, , ( ) 0,050 (0,030-0,070) 23 4, , ( ) 0,050 (0,030-0,070) 25 5, , ( ) 0,110 (0,090-0,130) 33 7, , ( ) 0,150 (0,130-0,170) 37 9, ,7 [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,010 (0,005-0,030) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,020 (0,005-0,040) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,010 (0,005-0,030) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,020 (0,005-0,040) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,010 (0,005-0,030) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,020 (0,005-0,040) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) ,0 For drillig operatios, we recommed to reduce (feed speed per tooth) by 50% compared to full slot millig 19
20 Techical ata VHM 484(W) TN12 Tolerace ø2,0-20,0= -0,02-0,04 45 ø2-5 IN 6535-HA ø6-20 IN 6535-HB Order-No. l N d 1 d L VHM TN VHM TN VHM TN , VHM TN , VHM 484W-06 TN , VHM 484W-08 TN , VHM 484W-10 TN , VHM 484W-12 TN , VHM 484W-16 TN , VHM 484W-20 TN , ormal legth versio = VHM 485(W) TN12 -> see ext page 20
21 Cuttig ata Recommedatio VHM 484(W) TN12 High grade steel High alloyed steel [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,050 (0,030-0,070) 15 5, , ( ) 0,110 (0,090-0,130) 20 7, , ( ) 0,150 (0,130-0,170) 25 9, , ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,050 (0,030-0,070) 15 5, , ( ) 0,110 (0,090-0,130) 20 7, , ( ) 0,150 (0,130-0,170) 25 9, , ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,050 (0,030-0,070) 15 5, , ( ) 0,110 (0,090-0,130) 20 7, , ( ) 0,150 (0,130-0,170) 25 9, , ( ) 0,015 (0,005-0,035) 3 0, , ( ) 0,015 (0,005-0,035) 5 1, , ( ) 0,020 (0,005-0,040) 7 1, , ( ) 0,025 (0,005-0,045) 9 2, , ( ) 0,030 (0,010-0,050) 11 2, , ( ) 0,040 (0,020-0,060) 11 3, , ( ) 0,050 (0,030-0,070) 13 4, , ( ) 0,050 (0,030-0,070) 15 5, , ( ) 0,110 (0,090-0,130) 20 7, , ( ) 0,150 (0,130-0,170) 25 9, ,5 [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,010 (0,005-0,030) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,020 (0,005-0,040) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,010 (0,005-0,030) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,020 (0,005-0,040) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,010 (0,005-0,030) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,020 (0,005-0,040) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) ,0 For drillig operatios, we recommed to reduce (feed speed per tooth) by 50% compared to full slot millig 21
22 Techical ata VHM 485(W) TN12 Tolerace ø2,0-20,0= -0,02-0,04 45 ø2-5 IN 6535-HA ø6-20 IN 6535-HB Order-No. l N d 1 d L VHM TN VHM TN VHM TN , VHM TN , VHM 485W-06 TN , VHM 485W-08 TN , VHM 485W-10 TN , VHM 485W-12 TN , VHM 485W-16 TN , VHM 485W-20 TN , short legth versio = VHM 484(W) TN12 -> see previous page 22
23 Cuttig ata Recommedatio VHM 485(W) TN12 High grade steel High alloyed steel [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 1, , ( ) 0,020 (0,000-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 2, , ( ) 0,030 (0,010-0,050) 18 2, , ( ) 0,040 (0,020-0,060) 21 3, , ( ) 0,050 (0,030-0,070) 23 4, , ( ) 0,050 (0,030-0,070) 25 5, , ( ) 0,110 (0,090-0,130) 33 7, , ( ) 0,150 (0,130-0,170) 37 9, , ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 1, , ( ) 0,020 (0,000-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 2, , ( ) 0,030 (0,010-0,050) 18 2, , ( ) 0,040 (0,020-0,060) 21 3, , ( ) 0,050 (0,030-0,070) 23 4, , ( ) 0,050 (0,030-0,070) 25 5, , ( ) 0,110 (0,090-0,130) 33 7, , ( ) 0,150 (0,130-0,170) 37 9, , ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 1, , ( ) 0,020 (0,000-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 2, , ( ) 0,030 (0,010-0,050) 18 2, , ( ) 0,040 (0,020-0,060) 21 3, , ( ) 0,050 (0,030-0,070) 23 4, , ( ) 0,050 (0,030-0,070) 25 5, , ( ) 0,110 (0,090-0,130) 33 7, , ( ) 0,150 (0,130-0,170) 37 9, , ( ) 0,015 (0,005-0,035) 5 0, , ( ) 0,015 (0,005-0,035) 10 1, , ( ) 0,020 (0,000-0,040) 13 1, , ( ) 0,025 (0,005-0,045) 15 2, , ( ) 0,030 (0,010-0,050) 18 2, , ( ) 0,040 (0,020-0,060) 21 3, , ( ) 0,050 (0,030-0,070) 23 4, , ( ) 0,050 (0,030-0,070) 25 5, , ( ) 0,110 (0,090-0,130) 33 7, , ( ) 0,150 (0,130-0,170) 37 9, ,0 [mi-1] [mm/mi] [cm 3 /mi] ( ) 0,010 (0,005-0,030) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,020 (0,000-0,040) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,010 (0,005-0,030) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,020 (0,000-0,040) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) , ( ) 0,010 (0,005-0,030) , ( ) 0,010 (0,005-0,030) , ( ) 0,015 (0,005-0,035) , ( ) 0,020 (0,000-0,040) , ( ) 0,025 (0,005-0,045) , ( ) 0,030 (0,010-0,050) , ( ) 0,030 (0,010-0,050) , ( ) 0,040 (0,020-0,060) , ( ) 0,090 (0,070-0,110) , ( ) 0,130 (0,110-0,150) ,0 For drillig operatios, we recommed to reduce (feed speed per tooth) by 50% compared to full slot millig 23
EPDBE. High-Precision Ball End Mills for Deep Machining FEATURES. Improved compound neck design for reduced chatter and increased strength
High-Precisio Ball Ed Mills for Deep Machiig FEATURES Improved compoud eck desig for reduced chatter ad icreased stregth New flute shape icreases resistace to breakage Stroger R flute helix agle improves
TOOLS NEWS Update B179G. Diamond Coated End Mills for Graphite. DFendmillseries. Item Expansion. High performance graphite milling.
TOOLS NEWS 217.4 Update B179G Diamod Coated Ed Mills for Grhite DFedmillseries Item Expasio High performace grhite millig. A Diamod Coated Ed Mills for Grhite DF ed mill series Crystallized Diamod Coatig
Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
EPDRF. High-Precision Four Flute Corner Radius End Mills for Deep Machining FEATURES. Flute shape provides both rigidity and excellent chip removal.
High-Pecisio Fou Flute Coe Radius Ed Mills fo Deep Machiig FEATURES Flute shape povides both igidity ad excellet chip emoval. Upecedeted coe adius accuacy of ±0.005mm. Bottom flute wipe effect educes chatteig
SC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
Carbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
INSERT SCREWS FOR MILLING CUTTERS
/ GENERAL INFORMATION INSERT SCREWS FOR CUTTERS Referece Old referece Sie Leght Screwdriver Isert Family 28349 - M 5.0 13.00 T20 5.0 N.m MP 2099 ZP 3200.. 416.1-833 VF 2394 M 3.5 9.40 10 IP 2.0 N.m PT-8007
ENGRAVING SELECTION OF ENGRAVING TOOLS 3/4 ENGRAVING TOOLS 1/2 ENGRAVING TOOLS HELICAL ENGRAVING TOOLS SEMI-FINISHED ENGRAVING TOOLS INFORMATION
EGRAVIG SELECTIO OF EGRAVIG TOOLS 200 3/4 EGRAVIG TOOLS 205 1/2 EGRAVIG TOOLS 208 HELICAL EGRAVIG TOOLS 210 SEMI-FIISHED EGRAVIG TOOLS 211 IFORMATIO 213 CUTTIG CODITIOS 214 www.dixiplytl.cm 201 SELECTIO
ALU-XP E T. The Alu-XP range: Exceptional performance and reliability.
The Alu-XP range: Exceptional performance and reliability. At Europa Tool we recognise that manufacturing components consistently and cost effectively is essential. To this aim, we have produced all data
Machine Screw and Fractional Sizes GO 1520 Double End w/handle 1551 NO GO. Nominal Size Length Handle
Thread Plug Gages Taper Lock Machie Screw ad Fractioal Sizes 1502 GO 1520 ouble d w/hadle 1551 NO GO Greefield thread plug gages are made of selected steel, maufactured with the fiest equipmet available,
Steel or Chrome Plated Cylindrical Plug n Inch and Metric Sizes GO 1629 Double End 1659 NO GO
Plai Gages Reversible Steel or Chrome Plated Cylidrical Plug Ich ad Metric Sizes 890123456789012890123456789012 890123456789012890123456789012 890123456789012890123456789012 890123456789012890123456789012
Bohle Handling Highlights T F
www.bohle-group.com Bohle Hadlig Highlights T +49 2129 5568-0 F +49 2129 5568-201 www.bohle-group.com 1 1 Veribor blue lie Pump-Activated Suctio Lifter made of Plastic, i Carryig Case Pump-activated suctio-lifter
TOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert!
TOOLS NEWS B250G Multi-functional Cutter for High Efficiency Machining VPX Series New Product Boost Your Milling with a Tough Tangential Insert! TOUGH & MULTI VPX Series Extremely rigid and functional.
EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
B250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER
VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER 2018.04 B250E TOUGH & MULTI-FUNCTIONAL 2 VPX SERIES Extreme rigidity and functionality. Thoroughly designed to completely change
Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
Solid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
Energy Oil & Gas Automotive. Aviation. Medical. Machining Titanium
Ti MACHINING Energy Oil & Gas Automotive Aviation Medical Machining Titanium TiAl6V4, Grade 5 alloy is the commonly used titanium grade. Some applications include: compressor blades, discs, and rings for
HYDRAULIC MOTORS EPMSY
HYDRAULIC NEW is the ew hydraulic motor i a family of "disc valve" series which has dimesios ad moutig data the same as at hydraulic motors type EPS. This motor is described with % hidger techical data-max.
NHD - Improved Solid Carbide Drill
February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills
ALPHA MILL P H M S K N 90 SQUARE SHOULDER MILLING WITH LOW CUTTING RESISTANCE & SMOOTH CHIP FLOW GENERAL
90 QUARE OULDER ILLIG WIT LOW CUTTIG REITACE & OOT CI FLOW teel ardened teel tainless teel RA s Cast Iron on Ferrous FEATURE - Inserts feature Alpha Curve geometry for the smoothest cutting action - Low
8 Sizes of Body Equal Pitch & Un-Equal Pitch. 7 Insert Grades 3 Types of Chip Breaker. No. 332
8 Sizes of Body Equal Pitch & Un-Equal Pitch 7 Insert Grades 3 Types of Chip Breaker No. 332 AFE45 Face Mill Q max High Efficient Jet Air Hole Roughing Semi-Finishing HRC 60 No. of Teeth 4 14 d 2 d 2 d
Bohle Handling Highlights T F
www.bohle-group.com Bohle Hadlig Highlights T +49 2129 5568-0 F +49 2129 5568-201 www.bohle-group.com 1 1 Veribor blue lie Pump-Activated Suctio Lifter made of Plastic, i Carryig Case This popular blue
End Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
AQUA DRILL EX OIL-HOLE LONG
AQUA DRILL EX OIL-HOLE LONG HIGH-EFFICIENT DEEP HOLE DRILL CELEBRATE THE POLE POSITION NEW AQUA EX COATING Deep-Hole Drills Aquadrill EX Oil-hole long Reliable and Durable in Largest Drill Depths High-Efficient
HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
Double Gash achieves perfect balance with rigidity and chip evacuation. It guarantees high performance in vertical and horizontal milling.
No. 439 EPSM-W-PN Epoch Multi Double Gash achieves perfect balance with rigidity and chip evacuation. It guarantees high performance in vertical and horizontal milling. Conventional single gash type EPSM
Okuma Horizontal Machining Centres
Offers valid September 1 st through October 31 st, 2014 Steel grade GC4315 Steel turig edurace GC4315 your optio for high metal removal rate eablig secure, umaed productio. Whe GC4325 reaches a limit i
Performance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
EVMSU - Vertical Multistage Pumps. Product Catalog
EVMSU - Vertical Multistage Pumps Product Catalog www.pumpsebara.com Built like a Kata a Precisio, Quality, Cuttig-Edge A Kataa is a traditioal Japaese sword made with distictive, logstadig expertise started
High-performance milling cutter NX-NVD NEW
High-performance milling cutter NX-NVD NEW Universal high performance with a double groove and variable helix [ 2 ] The NX-NVD high-performance milling cutter with patented double groove geometry and variable
METAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT
128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel
-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders
YE-IS16 Y-Coated End Ultra-micro Grain Carbide Heads with Carbide & Steel Holders Exchangeable Modular heads for Finishing & Semi-Finishing The most cost reducing solution with various compatibility. Y-Coated
M.A.FORD Where high performance is the standard.
Products For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid
Smaller, Lightweight Alternative Two-Stage Air Cleaner Designed for horizontal installation
FKB Air Cleaer Smaller, Lightweight Alterative Two-Stage Air Cleaer Desiged for horizotal istallatio The FKB series is a family of twostage air cleaers for medium dust coditios. Compared to other air cleaer
Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B40. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
TOOLS NEWS. Tough applications require ''Plus'' performance. Series. Series Expansion. Carbide end mills MS plus B205G
TOOLS NEWS 216.1 Update B25G Carbide end mills MS plus Series Series Expansion Tough applications require ''Plus'' performance Carbide end mills MS plus General purpose end mill optimized ''plus'' performance.
Safety Shock Absorbers SCS33 to SCS64
s SCS33 to SCS64 66 ased o the iovative desig cocepts of the MAGUM rage, ACE itroduces the SCS33 to SCS64 series of safety shock absorbers. Desiged to provide machie protectio i a emergecy ruaway situatio
2 Flutes UTCOAT. Size φ0.2~φ6 C-CER. Recommend deep rib milling using an under cut design. Total 138 models. Features
Flutes UTCOAT Size φ0.~φ C-CER Material Applications( Highly Recommended Recommended Suggested) Work Material Carbon Steels S45C S55C Alloy Steels SK / SCM SUS Prehardened Steels NAK HPM Hardened Steels
PowerCore. Filtration Technology. Why was it developed? What is it about? How does it work? PowerCore
Filtratio Techology Why was it developed? Vehicle desig is movig from classic to aerodyamic. This meas less uder-hood space, highly stylized, cost effective desigs, greater operator visibility, higher
Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B39. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
RDXSeries Vertical Machining Centers
RDXSeries Vertical Machiig Ceters RDX Series Vertical Machiig Ceter OVERVIEW Jyoti has specially developed RDX Series for die ad moulds applicatio with greater accuracy. Structure with broad rigid base
KED Drill. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
M.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
DuraLite ECB, ECC, ECD Air Cleaner
Air Cleaer Coveiet DuraLite Disposables Rugged Air Cleaers for Small ad/or High Pulsatio Gas & Diesel Egies The DuraLite Air Cleaers are disposable, oe-stage, dry air cleaers which are used o light-duty
FLEET-RACK heavy-duty pickup rack for emergency lighting
FLEET-RACK heavy-duty pickup rack for emergecy lightig ENGINEERING COMPANY, INC. Form# FLTR0512 america employees, America maufacturig, America pride! america employees, america maufacturig, america pride!
Carbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter
for Exotic s Anti-vibration Type SSEHVL 000W-R Type ing Side Milling Groove Milling Groove Finishing Face Milling Profile Milling Hardened 5 to 55 55 to 60 60 to 65 HRC HRC HRC Carbide Carbon Pre-hardened
Single Shaft Shredder G X V P. Harness The Power of Nature. l l l
Sigle Shaft Shredder l l l G X V P Haress The Power of Nature Head waste Wove bags Bales Drums Lumps Tyres E-waste Cardboard Pallets Paper Film Cables Purgigs Rubber Raffia Barrels PET Bottles MSW Pipes
Built with. Donaldson. Technology.
EPB ERB2 Air Cleaer Primary Dry RadialSeal Air Cleaers which offer improved reliability ad durability, reduced weight ad costs ad better serviceability. The EPB-ERB2 Primary Dry RadialSeal Air Cleaers
More pressure, less abrasive, faster to the finish!
WATERJET CUTTING AT 6,000 BAR PRESSURE More pressure, less abrasive, faster to the fiish! Higher pressure makes the water ad abrasive particles move faster, decreases the jet diameter, thereby icreasig
Features. May 1, No. 204-M-02
May 1, 2009 No. 204-M-02 Features - High rake angle cutting edge realized high feed and multi functional machining due to reduced cutting load. - HRMD has improved economical aspect to use 6 cutting edges
Drilling Depth ( L / D) Content
Micro Long Drill General Features Micro Long Drills are oil-hole drills for high efficiency drilling that were developed for drilling deep, small-diameter holes. These next-generation, small-diameter hole
for Household Appliances
for Household Appliaces motors for Household Appliaces. Geeral catalogue Washig machies 3-phase motors Uiversal motors Asychroous motors DSHWASHERs NDUCTON MOTORS BRUSHLESS MOTORS DRYERs NDUCTON MOTORS
MC-CH ELECTRIC CHAIN HOIST FROM 40 TO 5000 KG
MC-CH ELECTRIC CHAIN HOIST FROM 40 TO 5000 KG COMPACT DESIGN ROBUST CONSTRUCTION EASE OF MAINTENANCE AVAILABILITY ASSURED ADVANCED TECHNOLOGY LIFTING CAPACITY UNTIL 5000 KG PROTECTION CLASS IP 55 (OPTION
Burrs.
g Burrs Ultra Micro Grain ALtima 52 Z4 Ultra Micro Grain Micro Grain Carbide Grade Multi plication for roughing and finishing Covers wide range of materials Wide Lineup of Neck Lengths Ideal for Die &
High-performance milling cutter NVDS For up to 15 times faster penetration
passion for precision High-performance milling cutter NVDS For up to 15 times faster penetration New cutting data calculator ToolExpert The 7 dimensions of NVDS technology opens a ground-breaking range
INDEXABLE DRILLS. Pages Phone: (800) WDX Drills. WDX Features & Benefits
INDEXABLE DRILLS ages 471-493 ages Features & Benefits.......................... 47 Insert Selction Guide....47 XD - 5XD (INCH) & 4XD Side ort....... 473-475 XD - 5XD (METRIC)... 476-477 Cutting Conditions...
High-performance milling cutter NVDS For up to 15 times faster penetration
passion for precision High-performance milling cutter NVDS For up to 15 times faster penetration New cutting data calculator ToolExpert The 7 dimensions of NVDS technology opens a ground-breaking range
KED DRILL. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
FPG Air Cleaner. Advanced Sealing Technology in Compact Two-Stage Design For the Most Reliable Engine Protection. Medium Dust Conditions
FPG Air Cleaer Advaced Sealig Techology i Compact Two-Stage Desig For the Most Reliable Egie Protectio The FPG Air Cleaer series are two-stage full-plastic air cleaers with a built-i Pre-Cleaer ad RadialSeal
Bridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on
Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with
TOOL NEWS. Heptagonal double sided insert. Economical 14 cutting edge inserts. General Purpose Multi Corner Insert Type Face Milling Cutter AHX Series
TOOL NEWS General Purpose Multi Corner Insert Type Face Milling Cutter AHX Series 2016.6 Update B195A Series Expansion Heptagonal double sided insert. Economical 14 cutting edge inserts. AHX440S for Machining
Solid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
Endmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy
Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable
HYDRAULIC MOTORS MH APPLICATION GENERAL. » Agriculture machines» Food industries» Mining machinery etc. » Conveyors
HYDRAULIC APPLICATION» Coveyors» Feedig mechaism of robots ad maipulators» etal workig machies» Textile machies» Agriculture machies» Food idustries» iig machiery etc. CONTENTS Specificatio data... 77
Mill Tap Center. jyoti.co.in
Mill Tap Ceter Vertical Machiig Ceters Mill Tap Ceter Vertical Machiig Ceter OVERVIEW Mill Tap Ceters have bee desiged ad developed with the capability to deliver high speed, high performace ad high productivity
R PS System R PS System RPS SYSTEM
RPS System RPS System RPS SYSTEM exen offers both premium and value roller pinions with rack options to fit any application. The following tables show specifications for the various rack and pinion configurations.
MAN HydroDrive. More traction. More flexibility. More safety. MAN kann.
MAN HydroDrive. More tractio. More flexibility. More safety. MAN ka. A woder of tractio efficiecy. More tractio but little extra weight. Lower fuel cosumptio ad higher payload tha o covetioal all-wheel-drive
Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
MHS TOOLS NEWS B137G. Drills for die & mould machining
TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need
Drilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
R70. Technical Data. LPG Forklift Trucks Models R T/R T/R T.
R70 Techical Data. LPG Forklift Trucks Models R 70-20 T/R 70-25 T/R 70-30 T. R 70 LPG Forklift Trucks. I accordace with VDI guidelies 2198, this specificatio applies to the stadard model oly. Alterative
MFH-RAPT R High Feed Milling Cutter
MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase
AquaREVO DRILLS NEW HIGHLY EFFICIENT AND MULTI-PURPOSE. Doubled tool life due to improved substrate, coating and cutting geometry
AquaREVO DRILLS HIGHLY EFFICIENT AND MULTI-PURPOSE CELEBRATE THE POLE POSITION NEW Doubled tool life due to improved substrate, coating and cutting geometry AquaREVO DRILLS STUB (3D) / REGULAR (5D) REVOlutionize
KGD for Automatic Lathe
Cut-off Tool Cut-off Tool KGD KGD for Automatic athe Stable achining and ong Tool ife ower Production Costs Edge idths Available from 1.3 mm Excellent Chip Control ong Tool ife with EGACOAT NANO P1535
S-TAW. Changeable Carbide Insert Type Drill
News 2012.02 - Drilling Tools Changeable Carbide Insert Type Drill Innovative insert clamping offers stability and reliability when drilling small holes. Diameter range ø10.0- ø18.4, L/D 1.5, 3, 5, 8 54
SSG Donaclone Air Cleaner
Desiged for the Worst Dust Coditios New Choice for Costructio ad Off-Highway Applicatios The SSG Air Cleaer offers desig improvemets ad therefore replaces our older SRG Air Cleaer models. SRG Model G0008
SEV and SE1 ranges kw
SEV ad SE1 rages 1.1 11 kw ow with aalogue sesors GRUNDFOS WASTEWATER Grudfos SEV ad SE1 rages Highly advaced pumps with may uique features The Grudfos SEV ad SE1 rages are techologically very advaced
Precision VISES. Serie di Parallele per fresatura Set of precision parallels Parallelunterlagen Assortiments de cales de fraisage appairées
INDICE INDEX INHALT SOMMAIRE 25 Precision VISES Morse modulari di precisione High precision modular vises Präzisions-Schraubstöcke Étaux de fraisage de précision 1 Morse a macchina Machine vises Maschinenschraubstöcke
Extremely small dimensions, extremely high precision.
Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance
Single Shaft Shredders
Sigle Shaft Shredders The Home of Size Reductio Head waste Wove bags Bales Drums Lumps Tyres E-waste Cardboard Film Cables Pallets Paper Purgigs Rubber Fibers Slugs Barrels Pipes Foil PET Bottles Caisters
Expanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads
Page 1 / 5 MM GRIT 28K-45A MM GRIT 28K-75-6T10 MM GRIT 28K-60-6T10 MM GRIT 28K-45-6T10 Expanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads Page 2 / 5 Highlights Following market
Solid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
AQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,
Series C95. ISO/VDMA Cylinder: Large Bore Size Type. Conforming to ISO 6431/CETOP RP43P/VDMA ø125, ø160, ø200, ø250
ISO/VDM Cylider: Large Bore Size Type ø, ø60, ø, ø Coformig to ISO 643/CETOP RP43P/VDM 456 CJ CJP CJ CM CG MB MB C CS C76 C85 C95 stadard type sigle rod ø has bee remodeled. Whe selectig this model, please
Engine Installation Guide
Egie Istallatio Guide CONTENTS How to Prevet Egie Failure - - Complete Prep & Istall Procedures Warraty Registratio Maiteace & Cotact Iformatio - Dyo Testig 1 Cogratulatios! Your ew BluePrit egie is the
ADF. Vol.6. Carbide Flat Drill ADF-2D ADFLS-2D ADFO-3D 超硬フラットドリル ステンレス鋼対応可能油穴付き160 サイズ追加
超硬フラットドリル ADF Carbide Flat Drill ADF-2D ADFS-2D ADFO-3D Vol.6 新価格体系 New Price 2018 年 6 月 ステンレス鋼対応可能油穴付き160 サイズ追加 Expanded with oil hole type in 160 sizes. Stainless steel compatible. 2Dタイプに小径 φ0.2 1.95mm
High Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.9 Update B233G Solid Carbide Flat Bottom Drills Series Item Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
DOMAIN LED AREA LUMINAIRE
SLIMLINE MEETS FUNCTION The NEW LED rage of area lumiaires provide a combiatio of FUNCTIONALITY ad ELEGANT SLEEK FORM to provide a reliable geeral lightig solutio for your PERFORMANCE The LED use the very
Metric Bevel Gears Ratio 1:1 Pressure Angle 20 Material: Steel 34 Cr 4
Ratio 1:1 Pressure Agle 20 Material: Steel 34 Cr 4 O request: 303 Stailess Steel Brass - Modules 0.5, 0.75, 1 Zic die-cast Ratio 1:1 Dimesios i mm 1.5 16 8 19 26.1 9.5 15.4 16.9 24 5.9 K1100 2.0 16 10
Drills Jobber, DXJ D D D D
Drills Jobber, DXJ 0840 8.4 117 75 0840 0840 0850 8.5 117 75 0850 0850 0860 8.6 81 0860 0860 00 8.7 81 00 00 03 8.73 11/32 81 03 03 0880 8.8 81 81 0880 0880 0890 8.9 8.9 81 81 0890 0890 9.0 9.0 81 81 0910
LEICHTMETALL-GETRIEBE
Itelliget Drivesystems, Worldwide Services Itelliget Drivesystems, Worldwide Services LEICHTMETALL-GETRIEBE GEARED MOTORS AND FREQUENCY MIT GLATTMOTOREN INVERTERS 0,37 1,1 kw EN COMPLETE DRIVE SYSTEMS
Operational Status Evaluation for Electric Vehicle Chargers based on Layered Radar Map Method
Iteratioal Coferece o Eergy ad Evirometal Protectio (ICEEP 206) Operatioal Status Evaluatio for Electric Vehicle Chargers based o Layered Radar Map Method Tao Jiag,a, Weiyog u,b, Jia Hu, c, Zhe Luo,d,
Rotary Screw Compressors R-Series 5-11 kw (5-15 hp) Fixed and Variable Speed Drives
Rotary Screw Compressors R-Series 5-11 kw (5-15 hp) Fixed ad Variable Speed Drives Compact Performace Where You Need It The affordable Igersoll Rad R-Series 5-11 kw compressor exteds the R-Series family
1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel
1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel SPIROLEX 10 / 3G NIHS For brass, traversing holes, with 2 helicoidal grooves. Helix at left, perfectly countersinking
MAN Lion s Intercity.
MAN Lio s Itercity. The perfect solutio for itercity travel. MAN Truck & Bus AG Postfach 50 06 20 D-80976 Müche www.bus.ma D112.553/E ort09172 Prited i Germay Texts ad illustratios are o-bidig. We reserve
circular saw blades side milling cutters
edition 04 / 2018 circular saw lades side milling cutters cutting-off, sawing, milling Overview Information aout the catalogue 2 Tools 4 Circular knives 34 Special tools 36 Technical information 38 1 Grüezi
DRILLS CARBIDE. Drills Carbide When productivity matters - 3xd 1
Drills Carbide When productivity matters - 3xd 1 to 12xd 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings DRILL CARBIDE Drills
MP200E ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING
ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING 2017.09 MP200E ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING ARM is a new multifunctional high-performance cutter that
SPOOL VALVE HYDRAULIC MOTORS
SPOOL VALVE HYDRAULIC OTORS CONTENTS Page Hydraulic otors Series... 4 Hydraulic otors Series P... 13 Hydraulic otors Series R... 32 Hydraulic otors Series R...T (tacho)... 43 Hydraulic otors Series RNA...