Mechatronic- Compact Trainings-System MCS

Transcription

1 Didaktik in Regelungs- und Steuerungstechnik IDV Ingenieurbür de Vries Mechatrnic- Cmpact Trainings-System MCS Technical changes reserved Catalgue MCS 01/12 IDV Ingenieurbür de Vries - Dnnerschweer Str Oldenburg - (0441) (0441)

2 Learning cntents: Sensric Prcess-cntrl Electrnic Installatin Electrical Drives Security and Industrial safety Diagnstic Pneumatic PLC-prgram-develpment Lgistic Mechanic Autmatin All this learning cntents are fr the prfessin in the future, the Mechatrnicer!!

3 Mechatrnic-Cmpact-System The MCS system is a cncept with many differently pssible set. The mdules are cnceived t the cnstructin n wrk-tables. Every single mdule is fully able t wrk fr itself. At the end f the descriptin f the single mdules yu see a cuple f pssibilities hw a big slutin can arise frm several different mdules. Well, yu and yur students grw with the number at mdules. Yu find the same cntrl bard ne t the cmplete slutin as we ffer als in ur PLC catalgue. Frm the PLC with apprpriate Sub-D cnectrs fr the simple and uncmplicated cnstructin and inauguratin f a mdule r sme mre in the cmbine. T this ne PLC can cnnected a cntrl bard respectively and tw MCS mdules. If yu want t ccur fr a special slutins als ne PLC gt ready fr this especially, then make an enquiry abut this, please. Every PLC cntrl is fundamental in this free educatin system assimilably. The delivery always is carried ut with a fully perating example prgram. The structured cnstructin allws t allcate the single mdules as a prject t different prject teams. Many different prject teams can s slve the mst different prblems simultaneusly. The different prject teams must with her respective "neighbrs" abut the "Piece hand ver" (Hand shake) cmmunicate. The MCS system has varius cmpnents f the cntrl technlgy. Yu reach a high degree thrugh this in the educatin t efficiency. Overview Cnsist f: 13 Mdule s 2 Cntrl panel s MCS 560, PLC-mdule (Different PLC s pssible) 1 Preparatin unit MCS Cnnecting cable 1 Wrkbk

4 Mechatrnic-Cmpact-System Descriptin Shrt-frm Item.-N. Falling magazine with check unit FMZPE MCS-500 Falling magazine FMZ MCS-505 Swivel unit SU MCS-510 Measuring-analgues MA MCS-520 Srting SORT MCS-530 Rtary index table RST MCS-570 Pick and place, electrically PPE MCS-580, MCS-585 Pick and place, pneumatically PPP MCS-590 Wrking Drill BAB MCS-600 Stck with three Magazines LAG MCS-610, MCS-615 High-rack warehuse HRL MCS-620 Cntrl panel BED MCS-560, MCS-565 Cntrl mdule (PLC) SM S-100/S7C, r with DP

5 Descriptin Order - N. MCS- Mduls FMZ-PE Falling magazine with check unit MCS- 500 Frm a strerm wrkpieces are prvided ccasinal and n a filling. The filling level f the strerm is questined n sensr and the wrkpiece with a capazitiv n the filing with a micrswitch. The material quality f the wrkpiece are determined by means f a visual and inductive sensr. A duble acting cylinder slides the wrkpieces frm the falling magazin seperatly. The end psitins f the pistn are stated abut cntactless signaling transmitters (REED). The cylinder mving is cntrlled by a 5/2-way slenid valve. Cnstructin F-subplate 160 x 400 mm Data-interface Cmpact valve unit Mve ut cylinder 2 slides Learning cntents: Material cntrl with linearptentimeter Pushing ut fr defined pieces Sensric (magnetic, inductive,capacitive) Light barrier duble acting cylinder 5/2-way valve Exhaust cntrl Cmbinatins Supply: Pneumatic pressure: Signal transmitter: Actrs: PLC-Cnnectrs: Installatin: Wrkpiece: Dimensins (WxDxH): Weight: FMZ-PE Data 24 VDC bar, nt lubricated 2 Cylinder switches 1 One way light barrier 1 Micr switch 1 ptical Sensr 1 inductive Sensr 5/2-Way valve, bistable duble acting Cylinder 6DI,2DO 25-pl. D-SUB Cylinder 30 x 20 mm 160 x 400 x 340 mm 2.7 kg SU PPE PPP LAG

6 MCS- Mduls Descriptin Order - N. FMZ Falling magazine MCS- 505 Frm a strerm wrkpieces are prvided ccasinal and n a filling. The filling level f the strerm is questined n sensr and the wrkpiece with a capazitiv n the filing with a micrswitch. A duble acting cylinder slides the wrkpieces frm the falling magazin seperatly. The end psitins f the pistn are stated abut cntactless signaling transmitters (REED). The cylinder mving is cntrlled by a 5/2-way slenid valve. Supply: Pneumatic pressure: Signal transmitter: Actrs: PLC-Cnnectrs: Installatin: Wrkpiece: Dimensins (WxDxH): Weight: FMZ Data 24 VDC bar, nt lubricated 2 Cylinder switches 1 One way light barrier 1 Micr switch 5/2-Way valve, bistable duble acting Cylinder 4DI,2DO 25-pl. D-SUB Cylinder 30 x 20 mm 160 x 400 x 340 mm 2.5 kg SU PPE PPP Cnstructin F-subplate 160 x 400 mm Data-interface Cmpact valve unit Mve ut cylinder 2 slides Learning cntents: Pushing ut fr defined pieces Sensric (magnetic) Light barrier duble acting cylinder 5/2-way valve Exhaust cntrl Cmbinatins LAG

7 Descriptin MCS- Mduls Order - N. SU Swivel unit MCS- 510 The pick and place cnverts wrkpieces between tw mdules with defined take ver pints. A pneumatic rtary drive is cntinusly adjustable between 180. It s transprts the wrkpieces with a vacuumgripper. A ejectr is munted at the assembly-grup. The end psitins f the pistn are stated abut cntactless signaling transmitters (REED). The cylinder mving is cntrlled by a 5/2-way slenid valve. Cnstructin Data: F-subplate 160 x 400 mm Data-interface Cmpact valve unit Pick and place unit Ejectr Learning cntents: Sensric (magnetics) Suctin cup s Ejectrs rtating cylinder 5/2-way valve (mn stable) FMZ Supply: Pneumatic pressure: Signal transmitter: Actrs: PLC-Cnnectrs: Installatin: Wrkpiece: Dimensins (WxDxH): Weight: 24 VDC bar, nt lubricated 2 Cylinder switches 5/2-Way valve, unistable 5/3-Way valve, NO Swivel unit Ejectr 2DI,3DO 25-pl. D-SUB Cylinder 30 x 20 mm 160 x 400 x 300 mm 2.1 kg MA FMZ-PE SU RST Cmbinatins HRL12 HRL12 BAB BAB RST SORT03

8 MCS- Mduls MA Descriptin Order - N. Measuring analgues MCS- 520 Wrkpieces are driven with a vertical cnstructin n a wrkpiece-subplate against a way-measureing-system. An analgus vltage signal range between V can cntrlled with a PLC at the analgus input (Materialwide-measuring). The wrkpiece can mve n a half psitin at the the vertical cnstructin f the next statin r at the lwer psitin. The end psitins f the pistn are stated abut cntactless signaling transmitters (REED). The cylinder mving is cntrlled by a 5/2-way slenid valve. Cnstructin Supply: Pneumatic pressure: Signal transmitter: Actrs: PLC-Cnnectrs: Installatin: Wrkpiece: Dimensins (WxDxH): Weight: Data 24 VDC bar, nt lubricated 2 Cylinder switches 3 REED-switches 1 Analgus measuring system 5/2-Way valve, unistable 5/3-Way valve, NO Rdless Cylinder 4 DI, 3 DO, 1 AI 25-pl. D-SUB Cylinder 30 x 20 mm 160 x 400 x 400 mm 3.0 kg F-subplate 160 x 400 mm Data-interface Cmpact valve unit Vertical Cnstructin with rdless-cylinder Analgus way-measuring system Mve ut cylinder 2 slides Learning cntents: Pushing ut fr defined pieces Sensric (magnetic) Light barrier duble acting cylinder 5/2-way valve Exhaust cntrl SU MA RST PPE PPP BAB SORT03 Cmbinatins

9 MCS- Mduls Descriptin Order - N. Srting MCS- 530 SORT03 Wrkpieces mved with a linear system at three slides. A driving pneumatic utput device transprts the wrkpieces depence f the material quality n the slides. The filling level f the slides is supervised with a light barrier. The psitining f the linear system is carried ut with a frk-light-barrier. The end psitins f the pistn are stated abut cntactless signaling transmitters (REED). The cylinder mving is cntrlled by a 5/2-way slenid valve. Cnstructin Data: AI-T-subplate 305 x 400 mm Data-interface Cmpact valve unit linear unit with pneumatic utput device 3 Slides Light barrier Learning cntents: Electrical drives Reversing cntactr Sensric (magnetic) duble acting cylinder 5/2-way valve Light barrier Psitining with frk light barrier Supply: Pneumatic pressure: Signal transmitter: Actrs: PLC-Cnnectrs: Installatin: Wrkpiece: Dimensins (WxDxH): Weight: MA 24 VDC bar, nt lubricated 1 Cylinder switches 2 Micr switches 1 Frk light barrier 5/2-Way valve, unistable Cylinder Mtr cntrl 4DI,3DO 25-pl. D-SUB Cylinder 30 x 20 mm 305 x 400 x 130 mm 4.2 kg SORT03 Cmbinatins SU PPE PPP

10 MCS- Mduls RST Descriptin Order - N. Rtary index table MCS- 570 The rtary index table, driven electrically prmtes wrkpieces in the circle and places this in the angle f 90. The wrkpieces must be put n the rtary index table and taken by ther unities. A check unit munted ver the rtary index table with three sensrs recgnizes the wrkpieces when "present", "bright", "dark" and "metallic". The results can be displayed n the indicatin. The 90 psitins are included with an inductive sensr. The mtr cntrl is carried ut with a relay. Cnstructin Supply: Pneumatic pressure: Signal transmitter: Actrs: PLC-Cnnectrs: Installatin: Wrkpiece: Dimensins (WxDxH): Weight: Data 24 VDC bar, unt lubricated 2 inductive sensrs 1 capacitiv sensr 1 ptical sensr 1 Mtr cntrl LED units 4DI,4DO 25-pl. D-SUB Cylinder 30 x 20 mm 320 x 400 x 295 mm 4.8 kg F-subplate 160 x 400 mm Data-interface Cmpact valve unit Geared electric mtr Relay cntrl Sensr, inductive Check unit Display unit Learning cntents: Psitining f pieces Electrical drives Material cntrl with different sensrs Mdule technics MA SU RST SU Cmbinatins PPE PPE PPP PPP

11 MCS- Mduls Descriptin Order - N. Pick and place electrically MCS- 580 PPE A stepper mtr (with 48 steps n 4 phases with a transmissin bx rati 1:20) is raised by a shrt strke cylinder. Wrkpieces are fetched f anther mdule at the first psitin and prmted in the circle with a suctin gripper. On every psitin (all ) are wrkpieces can be put dwn. The psitins get definite with a PLC-prgram. The stp psitins f the cylinder are cntrlled with a REED switch. The cylinder cntrl is carried ut with an electrically perated 5/2-Way valve. Alternative: Mving with Electrmtr and light barrier cntrl fr psitining: Order-N. MCS-585 Cnstructin F-subplate 160 x 400 mm Data-interface Cmpact valve unit Geared electric mtr Stepper mtr unit Micr switches Suctin cup with ejectr Shrt strke cylinder Learning cntents: Electrical drives Stepper mtr cntrl Psitining f wrkpieces duble acting cylinder 5/2-way valve Vacuum technlgy Cmbinatins FMZ FMZ-PE MA Supply: Pneumatic pressure: Signal transmitter: Actrs: PLC-Cnnectrs: Installatin: Wrkpiece: Dimensins (WxDxH): Weight: PPE Data: 24 VDC bar, nt lubricated 1 Cylinder switch 1 Micr switch 5/2-Way valve, unistable Cylinder Stepper mtr 2DI,6DO 25-pl. D-SUB Cylinder 30 x 20 mm 160 x 400 x 230 mm 3.0 kg MA BAB BAB RST SORT03

12 MCS- Mduls PPP Descriptin Order - N. Pick and place pneumatically MCS- 590 Pneumatically actuated device with the wrkpiece pneumatically taked, lift and after a swivel mve (180 ) placed back. A duble acting turning saved Pneumatic cylinder raises a Swivel unit with pneumatic angled gripper. Taked wrkpieces are raised and prmted with the Swivel unit t the new psitin. The stp psitins f the cylinder are cntrlled with cntactless signaling transmitters stated. The clsed grab is included with an inductive sensr. Cnstructin Supply: Pneumatic pressure: Signal transmitter: Actrs: PLC-Cnnectrs: Installatin: Wrkpiece: Dimensins (WxDxH): Weight: Data 24 VDC bar, nt lubricated 1 inductive sensr 3 REED switches 2 5/2 Way valves, unistable 1 5/2-Way valve, bistable 4DI,4DO 25-pl. D-SUB Cylinder 30 x 20 mm 160 x 400 x 225 mm 3.5 kg F-subplate 160 x 400 mm Data-interface Cmpact valve unit Shrt strke cylinder Swivel unit Learning cntents: 2-axes-Handling angled gripper sensrs technlgy Way valve s HRL12 PPP BAB RST BAB SORT03 Cmbinatins

13 MCS- Mduls Descriptin Order - N. Wrking drill MCS- 600 BAB Drilling unit with which blatant wrkpieces is prmted, been t tight and drilled with ne f electrical drill unit pneumatically pressed. A linear unit prmtes blatant wrkpieces under the drilling unit and tighted this pneumatically. The drill unit mved dwn via a linear unit and drilled the wrkpieces. The stp psitins f the cylinder are cntrlled with REED cntacts. The cylinder cntrl is carried ut with electrically actuated way valves. Cnstructin F-subplate 160 x 400 mm Data-interface Cmpact valve unit Geared electric mtr Relay cntrl Cylinder switches Linear units Shrt strke cylinder Learning cntents: Electrical drives Reversing cntactr Tighting f wrkpieces duble acting cylinder 5/2-way valve Cylinder switches PPE Supply: Pneumatic pressure: Signal transmitter: Actrs: PLC-Cnnectrs: Installatin: Wrkpiece: Dimensins (WxDxH): Weight: BAB Data: 24 VDC bar, nt lubricated 4 Cylinder switches 5/2-Way valve, unistable 5/2-Way valve, bistable Cylinder Mtr cntrl 4DI,4DO 25-pl. D-SUB Cylinder 30 x 20 mm 160 x 400 x 355 mm 3.5 kg PPE Cmbinatins SU SU PPP PPP

14 LAG MCS- Mduls Descriptin Order - N. Stck with three Magazines MCS- 610 A stepper mtr (with 48 steps n 4 phases with a transmissin bx rati 1:20) is raised by a shrt strke cylinder. Wrkpieces are fetched f anther mdule at the first psitin and prmted in the circle with a suctin gripper. On every psitin (all ) are wrkpieces can be put dwn. The psitins get definite with a PLC-prgram. The stp psitins f the cylinder are cntrlled with a REED switch. The cylinder cntrl is carried ut with an electrically perated 5/2-Way valve. Alternative: Mving with Electrmtr and light barrier cntrl fr psitining: Order-N. MCS-615 Cnstructin Supply: Pneumatic pressure: Signal transmitter: Actrs: PLC-Cnnectrs: Installatin: Wrkpiece: Dimensins (WxDxH): Weight: FMZ Data 24 VDC bar, nt lubricated 1 Cylinder switch 4 Micr switches 5/2 Way valve, unistable Cylinder Mtr cntrl Suctin cup 2DI,6DO 25-pl. D-SUB Cylinder 30 x 20 mm 360 x 400 x 225 mm 5.0 kg LAG F-subplate 360 x 400 mm Data-interface Cmpact valve unit Gear bxes Stepper mtr Micr switches Suctin cups with ejectr Shrt strke cylinder Learning cntents: Electrical drives Stepper mtr cntrl Psitining f wrkpieces duble acting cylinder 5/2-way valve Vacuum technlgy FMZ-PE RST Cmbinatins BAB

15 MCS- Mduls Descriptin Order - N. High-rack warehuse MCS- 620 HRL Tw electrical linear units with tth belt drive and a pneumatic linear unit take wrkpiece frm a drawer psitin and prmte this t a hand ver psitin. This can n the right and n the left be f the high-rack warehuse. Able the wrkpieces taken f these hand ver psitin and be sailed fr string again. The psitins f the electrical axises are determined at a hle lath with frk light barrier. The pneumatic axis is cntrlled with cylinder switch. A reflex light barrier can recgnize wrkpieces in the stre bin. The mtr cntrl happens with a reversing cntactr circuit. The cylinder cntrl is carried ut with electrically perated way valves. Data: Cnstructin F-subplate 320 x 400 mm Data-interface Cmpact valve unit Geared electric mtr Relay cntrl Micr switches Linear units Shrt strke cylinder Learning cntents: Supply: Pneumatic pressure: Signal transmitter: Actrs: PLC-Cnnectrs: Installatin: Wrkpiece: Dimensins (WxDxH): Weight: 24 VDC bar, nt lubricated 4 Micr switches 4 frk light barrier 2 Cylinder switches 1 Reflectin light switch 5/2-Way valve, unistable Cylinder Mtr cntrl 11DI,5DO 25-pl. D-SUB Cylinder 30 x 20 mm 320 x 400 x 450 mm 6.5 kg 3-axes-Handling Scanning f wrkpieces Psitining and srting Electrical drives Reversing cntactr duble acting cylinder 5/2-way valve Cylinder switches SU HRL Cmbinatins PPE PPP SU

16 MCS- Cntrl-Mdule Descriptin PLC-Cntrl mdule Order - N. S-100/S7C The cntrl mdul can wrk n a table and has a Interfacebx, current supply, Emergency-OFF device and a arbitrary PLC (Picture: S7-300 CPU). The Interfacebx has three 25-pl. D-SUB pushing cnnectrs fr 2 MCS-Mdule s 1 Serves display This installatin can als wrk with lab-cable s (lks like Pneumatic) 4 mm Lab-cnnectrs deliver 24 VDC fr external use. 3 cnnectrs fr MCS Data PLC - mdular-unit S7-300 (CPU 313 C) Vltage supply 24 VDC 24 digital Input s 16 digital Output s, 24 VDC / 0,5A 4 analg Input s, +-10V, +-20mA, slutin 11Bit 2 analg Output, +-10V, +-20mA, slutin 11Bit Instructin Executin time: s (BasicInstructin) 0.5 s (Wrd-Operatin) integrated seriell cnnectin fr cmmunikatin with PC (MPI-Interface fr 32 branches) integrated High-Speed-Cunter up t 30 KHz Wrd Instructins, fluid-pint additin available Memry 32 KByte 2048 Auxiliary Relay, all remanent adjustable as Hlding Relay 256 Timer / 256 Cunter, all remanent adjustable Puls-width-mdulatin fr valve cntrl functins Prgrammable with ur Sftware WINSPS-S7 Real-Time-Clck prgrammable with S7-Sftware r WINSPS useable fr DIN A4-System (Rack) r fr Pneumatics pushing system integrated Functin-mdel "7-Segment-LED" integrated Digital and Analg - Simulatr incl. tp table Aluminium frame

17 MCS- Cntrl-Mdule Descriptin Order - N. SPS-Steuermdul S-100-S7-MCS700 The cntrl mdule is t put n the table with a interface bx. The Interface bx had five cnnectrs with 25-pl. D-SUB fr: 4 MCS-Mdule 1 Cntrl panel integrated Pwer supply. Exactly fr ur 4-Mdule-System MCS-700 Technical date same as S-100/S7C, but with integrated Pwer supply. Descriptin Order - N. SPS-Steuermdul S-100-S7-MCS11 The cntrl mdule is t put n the table with a interface bx. The Interface bx had five cnnectrs with 25-pl. D-SUB fr: 10 MCS-Mdule 1 Cntrl panel integrated Pwer supply. Exactly fr ur Big-Mdule-Systems like MCS-730 till MCS-760 Technical date same as S-100/S7C, but with integrated Pwer supply.

18 SPS - Steuergeräte SIEMENS-S7 mit Prfibus-DP-Master The PLC is delcable frm the didactical-subplate with tw screws, thereby easy t integrate in Mechatrnics-Flexible prductin system!! Descriptin PLC Order - N. S S7DP-MCS PLC - mdular-unit S7-300 (CPU 313 C DP) Vltage supply 24 VDC 16 digital Input s 16 digital Output s, 24 VDC / 0,5A DP-Master-Interface Instructin Executin time: s (BasicInstructin) 0.5 s (Wrd-Operatin) integrated seriell cnnectin fr cmmunikatin with PC (MPI-Interface fr 32 branches) integrated High-Speed-Cunter up t 30 KHz Wrd Instructins, fluid-pint additin available Memry 32 KByte 2048 Auxiliary Relay, all remanent adjustable as Hlding Relay 256 Timer / 256 Cunter, all remanent adjustable Puls-with-mdulatin fr valve cntrl functins Prgrammable with ur Sftware WINSPS-S7 Real-Time-Clck prgrammable with S7-Sftware r WINSPS useable fr DIN A4-System (Rack) r fr Pneumatics pushing system integrated Functin-mdel "7-Segment-LED" integrated Digital and Analg - Simulatr incl. tp table Aluminium frame PLC S S7DP-MCS 2 r: CPU 314 CDP same as S-100-S7DP-MCS but with extra 4 analg Input s, +-10V, +-20mA, slutin 11Bit 1 analg Input fr Resistance and Temperure 2 analg Output, +-10V, +-20mA, slutin 11Bit Same as S-100 / S7 with extra Prfibus-DP-Interface ideal fr the base educatin as with the CPU 313C, but after the base training yu can start with educatin in Bus technlgy.

19 Slaves with all Prtclls Basicly, we can implement the Slave-Adapter with fllwing Bus cntrllers: Prfibus-DP, Ethernet TCP-/IP, Prfinet IO, Interbus, DeviceNet, CANpen, CAL, MODBUS, CC-Link, Firewire, LONWORKS. Our Mdule s (n the next page) are realized with a Prfibus-Cntrller. Other cntrllers can be switched very easy n the same place as the PROFI- BUS-Cntrller. The I/O`s are the same. All PLC s can be changed t ther kind (OMRON, MITSUBISHI, Allen Bradley, etc...) Example: Order n. fr SIEMENS: S-100-S7-MCS11 Order n. fr OMRON: S-100-O-MCS11 Order n. fr MITSUBISHI: S-100-M-MCS11

20 PLC - Slaves with Prfibus-DP-Interface Basicly, we can implement the Slave-Adapter with fllwing Bus cntrllers: Prfibus-DP, Ethernet TCP-/IP, Prfinet IO, Interbus, DeviceNet, CANpen, CAL, MODBUS, CC-Link, Firewire, LONWORKS. Our Mdule s belw are realized with a Prfibus-Cntrller. Other cntrllers can be switched very easy n the same place as the PROFIBUS-Cntrller. The I/O`s are the same. Slave-Adapter MCS-569 Adapter t realize the SUB-D-plug frm a PLC r a fllwing Base-slave t the 4 mm safety plugs. Than yu can cnnect very easy the equipments like Valve s, switches, sensrs, and relays frm ur Electrpneumatics and Electrhydraulics system t the Bus-technlgy. SUB-D-cnnectr with 1.5 m cable 6 digital Inputs; 24 VDC 4 digital Outputs; 24 VDC; 0,5A 24 VDC-Supply Base-Slave MCS-DP-2D Slave with digital I/O s tgether with MCS-569 als t cnnect t standard cmpnents like Valve s, switches, sensrs, and relays frm ur Electrpneumatics and Electrhydraulics system t the Bus-technlgy Prfibus-Cntrller with a max. Data width up t 32 Byte 12 digital Inputs; 24 VDC 12 digital Outputs; 24 VDC; 0,5A Base-Slave MCS-DP-2DA Slave with digital and analgus I/O s tgether with MCS-569 als t cnnect t standard cmpnents like Valve s, switches, sensrs, and relays frm ur Electrpneumatics and Electrhydraulics system t the Bus-technlgy Prfibus-Cntrller with a max. Data width up t 32 Byte 12 digital Inputs; 24 VDC 12 digital Outputs; 24 VDC; 0,5A 2 analgus Inputs, 0-10V; 16 Bit

21 PLC - Slaves with Prfibus-DP-Interface Basicly, we can implement the Slave-Adapter with fllwing Bus cntrllers: Prfibus-DP, Ethernet TCP-/IP, Prfinet IO, Interbus, DeviceNet, CANpen, CAL, MODBUS, CC-Link, Firewire, LONWORKS. Our Mdule s belw are realized with a Prfibus-Cntrller. Other cntrllers can be switched very easy n the same place as the PROFIBUS-Cntrller. The I/O`s are the same. MCS-700-Slave MCS-DP-700 Slave with digital and analgus I/O s tgether with MCS-569 als t cnnect t standard cmpnents like Valve s, switches, sensrs, and relays frm ur Electrpneumatics and Electrhydraulics system t the Bus-technlgy Prfibus-Cntrller with a max. Data width up t 32 Byte 16 digital Inputs; 24 VDC 12 digital Outputs; 24 VDC; 0,5A 2 analgus Inputs, 0-10V; 16 Bit Exactly fr ur 4-Mdule-System MCS-700 Big-Slave MCS-DP-10 Slave with digital and analgus I/O s tgether with MCS-569 als t cnnect t standard cmpnents like Valve s, switches, sensrs, and relays frm ur Electrpneumatics and Electrhydraulics system t the Bus-technlgy Prfibus-Cntrller with a max. Data width up t 32 Byte 48 digital Inputs; 24 VDC 40 digital Outputs; 24 VDC; 0,5A 2 analgus Inputs, 0-10V; 16 Bit Exactly fr ur Big-Mdule-Systems like MCS-730 till MCS-760

22 MCS- Accessries Descriptin Order - N. Cntrl panel MCS- 560 The cntrl panel cnsist n a Alu-frame. Plastic fds secured the display n a gd psitin n the table. The serves display is cnnected with a 1m cabel n a 25-pl. D-SUB plug. 1 Light cntrl switch NC 3 Light cntrl switch NO 1 2-pl. switch with detent 2 Lights 1 Emergency-OFF-switch Weight: 0.6 kg Bedienpult MCS- 565 The cntrl panel cnsist n a Alu-frame. Plastic fds secured the display n a gd psitin n the table. The serves display is cnnected with a 1m cabel n a 25-pl. D-SUB plug. 1 Light cntrl switch NC 3 Light cntrl switch NO 1 2-pl. switch with detent 2 Lights 1 Emergency-OFF-switch Weight: 0.6 kg extra has this cntrl panel a Jy-Stick fr fur psitins with 4 extra Output s With this panel, it is pssible t cntrl with the Jystick the different mdule by Hand.

23 MCS- Accessries Preparatin unit MCS- 540 Filter and pressure regulatr with half autmatically water separatr, Filter bdy in Plycarbne Pressure regulating valve with gauge, adjustable and lckable 3/2-Way-shut ff valve Cnnectr fr tube 6/4 adjustable area 0,5 till 7 bar Nte: The preparatin unit is nt included in the mdule s. When yu wish t cntrl a big slutin cnsist f many mdules, yu need nly ne preparatin unit. When yu wish t cntrl single mdules, then yu need fr every mdule a preparatin unit. Accessries set and small parts MCS String bx 1 Screw driver 1 Allen key set 1 Tube cutter 6 Cnnectrs t cnnect different mdules 2 End caps fr Aluminium-Prfile 20x20 2 End caps fr Aluminium-Prfile 20x30 1 End cap fr Aluminium-Prfile 20x40 2 End caps fr Aluminium-Prfile 40x80 9 Wrkpieces D 30 mm cnsist f: Aluminium 2 x H=20 mm, 1 x H=21 mm Plastics black 2 x H=20 mm, 1 x H=19 mm Plastics white 3 x H=20 mm Nte: The accessries are nt included in the mdules. T cntrl a big slutin, cnsist f 4 mdules, ne accessries set are neccessary.

24 MCS- Cmbinatins Descriptin Order - N. Starter - Set MCS-690 Cntrl with 1xSM r by Bus FMZ-PE LAG 1 x BED

25 MCS- Cmbinatins Standard - Set MCS-700 Cntrl with 1xSM (S-100/MCS-700) Alternative pssible: (MCS-700/1) 2 student wrkgrups (each grup has 1 BED and 1 S-100/S7) r by Bus FMZ-PE SU MA SORT 1 x BED

26 MCS- Cmbinatins High-rack warehuse and Material check Alternative pssible: (MCS-720/1) 2 student wrkgrups (each grup has 1 BED and 1 S-100/S7) MCS-720 Cntrl with (S-100/MCS11) r by Bus HRL PPP RST BED

27 MCS- Cmbinatins Set with 6 mdules MCS-730 Cntrl with (S-100/MCS11) Alternative pssible: (MCS-730/1) 3 student wrkgrups (each grup has 1 BED and 1 S-100/S7) r by Bus FMZ SU MA RST PPP SORT BED

28 MCS- Cmbinatins Set with 8 mdules MCS-740 Cntrl with (S-100/MCS11) Alternative pssible: (MCS-740/1) 4 student wrkgrups (each grup has 1 BED and 1 S-100/S7) r by Bus RST PPP SORT SU MA PPE BAB FMZ BED

29 MCS- Cmbinatins Set with 9 mdules incl. High-rack warehuse MCS-760 Cntrl with (S-100/MCS11) Alternative pssible: (MCS-760/1) 5 student wrkgrups (each grup has 1 BED and 1 S-100/S7) HRL r by Bus RST PPP SORT PPP PPE MA SU BAB BED

30 Didaktik in Regelungs- und Steuerungstechnik Further Catalgue: IDV Ingenieurbür de Vries Didactic fr Cntrl technlgy in vcatinals IDV Engineers-Office de Vries Trainingssystem Didactic fr Cntrl technlgy in vcatinals IDV Engineers-Office de Vries Trainingssystem Didactic fr Cntrl technlgy in vcatinals IDV Pneumatics Electrpneumatics PLC Funktin-simulatin Bus technlgy Hydraulics Didaktik in Regelungs- und Steuerungstechnik IDV Ingenieurbür de Vries Didaktik in Regelungs- und Steuerungstechnik IDV Ingenieurbür de Vries Trainingssystem Mechatrnic Seminars Cntrl technlgy Flexible Prductin IDV Ingenieurbür de Vries Dnnerschweer Str Oldenburg - Germany - Tel (0)441 / Fax: +49 (0)441 / Web: Inf@ idv-didactic.cm IDV-Didactic.cm