MG 100. Spare parts list. Multi grapple. MG 100 s/n DEQ Construction Tools GmbH No

Transcription

1 MG 100 Spare parts list Multi grapple MG 100 s/n DEQ Construction Tools GmbH No

2 General information This spare parts list applies to the following: Part number Description Multi grapple MG 100 Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions! Instructions for ordering It is essential to indicate the serial number of the hydraulic attachment when ordering spare parts! Please note the full identification number of your hydraulic attachment. Determine the quantity of individual parts which are required and need to be ordered. The order must indicate the following details: full identification code of the hydraulic attachment required quantity part number description

3 Service, repair and wear part kits Kit list 1 Mechanical Multi grapple 3 Tightening torques 6 Dimensions 9 Options / accessories Hydraulic ports, hydraulic hoses 10 Optional equipment 13

4 Service, repair and wear part kits Kit list Tue Nov 14 12:14:34 UTC

5 Item Part No. Name Qty L KIT Label kit 1 50(51) Blade kit 1 51 Blade 2 KIT Seal kit (hydraulic cylinder) 1 55(56-57) Seal kit (rotary transmission) 1 56 O-ring, 11.3 x 2.4 mm, 90 IRH (NBR) 2 57 Seal 3 KIT Seal kit (hydraulic motor) 1 Tue Nov 14 12:14:34 UTC

6 Mechanical Multi grapple Tue Nov 14 12:14:35 UTC

7 Item Part No. Name Qty L Fitting Hexagon head screw, M8 x 130 mm Seal ring - Bounded seal - Oil outlet 3/8 USS Bearing bush Bearing bush Bearing bush Grease nipple Grease nipple Screw Allen screw, M10 x 20 mm Hydraulic motor Lock washer Rotor Screw Allen screw Fitting Allen screw, M12 x 35 mm Pinion Seal washer, 4.7 x 6.6 x 11 x 1 mm (steel-nbr) Bearing bush Hydraulic hose Lock nut, M Fitting Spring pin V-ring Disc Bounded seal Cap Stator Washer Upper part Bolt Bolt Bolt Grapple leaf (left) Grapple leaf (right) Hydraulic cylinder 1 Tue Nov 14 12:14:35 UTC

8 Item Part No. Name Qty L Housing Linkage Plug Live ring Lock washer 2 50(51) Blade kit 1 51 Blade 2 A 55(56-57) Seal kit (rotary transmission) 1 56 O-ring, 11.3 x 2.4 mm, 90 IRH (NBR) 2 57 Seal 3 Comments for Page: Multi grapple (L)OCAL REMARKS A You must use a qualified professional welding company to weld the blades onto the grapple leafs. Tue Nov 14 12:14:35 UTC

9 This page intentionally left blank Tue Nov 14 12:14:35 UTC

10 Mechanical Tightening torques Tue Nov 14 12:14:35 UTC

11 Item Part No. Name Qty L Not Shown - Bolt size: M8, property class: Nm (30 ft lbf) - Not Shown - Bolt size: M10, property class: Nm (59 ft lbf) - Not Shown - Bolt size: M12, property class: Nm (96 ft lbf) - Not Shown - Bolt size: M12 x 1.25, property class: Nm (81 ft lbf) - A Not Shown - Bolt size: M14, property class: Nm (148 ft lbf) - Not Shown - Bolt size: M16, property class: Nm (221 ft lbf) - Not Shown - Bolt size: M20, property class: Nm (443 ft lbf) - Not Shown - Bolt size: M24, property class: Nm (738 ft lbf) - Not Shown - Bolt size: M27, property class: Nm (1106 ft lbf) - Not Shown - Bolt size: M30, property class: Nm (1475 ft lbf) - Not Shown - Bolt size: M36, property class: Nm (2655 ft lbf) - Not Shown - Bolt size: M39, property class: Nm (3393 ft lbf) - Comments for Page: Tightening torques (L)OCAL REMARKS A Note: fine thread Tue Nov 14 12:14:36 UTC

12 Mechanical Dimensions Tue Nov 14 12:14:36 UTC

13 This page intentionally left blank Tue Nov 14 12:14:36 UTC

14 Options / accessories Hydraulic ports, hydraulic hoses Tue Nov 14 12:14:37 UTC

15 Item Part No. Name Qty L Not Shown - Open - Close Hydraulic hose, I.D. 8 both ends M16 x 1.5, conical seal 24, length 2000 mm (78.74 in.) 2 Not Shown - Rotation Hydraulic hose, I.D. 8 both ends M16 x 1.5, conical seal 24, length 2000 mm (78.74 in.) 2 Comments for Page: Hydraulic ports, hydraulic hoses Hydraulic ports A open B close C rotation counterclockwise D rotation clockwise Tue Nov 14 12:14:37 UTC

16 Options / accessories Optional equipment Tue Nov 14 12:14:37 UTC

17 Item Part No. Name Qty L Cutter grease cartridge, 12 x 400 g (0.88 lbs) Grease gun for 400 g cartridge 1 - Adapter plate matching the carrier. Consult the authorized Customer Center/Dealer in your area Base plate Bolt kit Allen key (14 mm) 1 Tue Nov 14 12:14:37 UTC

18

19

20 Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. epiroc.com