1200, 1200 DP. Spare parts list. Hydraulic breakers. Valid from serial number Atlas Copco Construction Tools GmbH No

Transcription

1 MB 00, 00 DP Spare parts list Hydraulic breakers MB 00 MB 00 DP Valid from serial number Atlas Copco Construction Tools GmbH

2

3 MB 00, 00 DP Contents Contents General note Spare parts list Hydraulic breaker MB Hydraulic breaker MB 00 DustProtector Percussion unit part : cylinder cover Percussion unit part : cylinder Percussion unit part 3: lower breaker part Connecting kit for ConitLube II StartSelect AutoStart or AutoStop Optional parts Tightening torques Working tools MB MB 00 DustProtector Accessories Hydraulic hoses Optional equipment Kits Label kit MB Label kit MB 00 DustProtector Seal kit Plastic parts kit Tensioning bolt kit DustProtector kit Noise protection kit Lower breaker part kit Lower breaker part kit DustProtector Dimensions Dimensions MB Dimensions MB 00 DustProtector Atlas Copco Construction Tools GmbH

4

5 MB 00, 00 DP Spare parts list General note This spare parts list applies to the following: Hydraulic breaker MB 00 Hydraulic breaker MB 00 DustProtector Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information on operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions! Instructions of ordering It is essential to indicate the serial number of the hydraulic attachment when ordering spare parts! Please note the full identification number of your hydraulic attachment. This code can be found on the cylinder. Determine the quantity of individual parts which are required and need to be ordered. The order must indicate the following details: full identification code of the hydraulic attachment required quantity part number description A B C A. Cylinder number B. Type C. Serial number 0 Atlas Copco Construction Tools GmbH

6 Spare parts list MB 00, 00 DP Spare parts list Hydraulic breaker MB Atlas Copco Construction Tools GmbH

7 MB 00, 00 DP Spare parts list () Percussion unit Elastic pad Shock absorber Guide plate Guide plate Guide plate Transport safety device complete Transport safety device Allen screw Label transport safety device Nut Cover Plug Plug Plug Lifting eye Breaker box ContiLube II Connecting kit for ContiLube II see separate chapter professional welding process necessary see separate Safety and operating instructions see separate chapter Atlas Copco Construction Tools GmbH

8 Spare parts list MB 00, 00 DP Hydraulic breaker MB 00 DustProtector Atlas Copco Construction Tools GmbH

9 MB 00, 00 DP Spare parts list () Percussion unit Elastic pad Shock absorber Guide plate Guide plate Guide plate Floating ring Counter ring Guide ring Bolt Locking bush Base for wiper Wiper Transport safety device complete Transport safety device Allen screw Label transport safety device Nut Cover Plug Plug Plug Lifting eye Breaker box ContiLube II Connecting kit for ContiLube II see separate chapter Note: When ordering a percussion unit for DustProtector version it is imperative to order additionally the base for wiper (no. 8) and the wiper (no. 9). tribolid steel see chapter Optional parts professional welding process necessary see separate Safety and operating instructions see separate chapter Atlas Copco Construction Tools GmbH

10 Spare parts list MB 00, 00 DP Percussion unit part : cylinder cover Atlas Copco Construction Tools GmbH

11 MB 00, 00 DP Spare parts list (883) (993) 9 93 Cylinder cover Seal Seal Oring Oring Filling valve complete Filling valve Threaded plug Oring Tensioning bolt complete Tensioning bolt Washer Atlas Copco Construction Tools GmbH

12 Spare parts list MB 00, 00 DP Percussion unit part : cylinder Atlas Copco Construction Tools GmbH

13 MB 00, 00 DP Spare parts list Cylinder Cover Main control valve Oring Protective cap Valve bushing Valve piston Threaded plug Valve bushing Valve piston Threaded plug Pin Threaded plug Seal Seal Oring Wiper Connecting screw Oring Nonreturn valve Percussion piston Lock pin Fitting Oring Plug Oring Valve with no AutoControl AutoControl AutoControl AutoControl AutoControl with no. 397 StartSelect Atlas Copco Construction Tools GmbH

14 Spare parts list MB 00, 00 DP Percussion unit part 3: lower breaker part Atlas Copco Construction Tools GmbH

15 MB 00, 00 DP Spare parts list (887) Lock pin Retainer bar Bolt Plug Protective cap Lower breaker part complete Lower breaker part Buffer ring Wear bush Wear bush Bolt Locking bush Threaded insert Note: When ordering a lower breaker part for DustProtector version it is imperative to order additionally the base for wiper (no. 8) and the wiper (no. 9). steel bronze see chapter Optional parts Atlas Copco Construction Tools GmbH

16 Spare parts list MB 00, 00 DP Connecting kit for ConitLube II , ,559,56 56,56, , Atlas Copco Construction Tools GmbH

17 MB 00, 00 DP Spare parts list 550(555566) Connecting kit Support Allen screw secure all allen screws with Loctite 3 screwed in the ContiLube II Pair of lock washers Adapter Fitting Hydraulic hose Adapter Fitting Hydraulic hose Seal Fitting Fitting secure with Loctite 3 secure with Loctite 3 Grease line secure with Loctite 3 Route the hydraulic hoses as shown on the drawing. It must be ensured that the hydraulic hoses can move freely and are not in contact at any point. secure with Loctite 3 secure with Loctite 3 Oil line secure with Loctite 3 Route the hydraulic hoses as shown on the drawing. It must be ensured that the hydraulic hoses can move freely and are not in contact at any point. secure with Loctite 3 secure with Loctite Atlas Copco Construction Tools GmbH

18 Spare parts list MB 00, 00 DP StartSelect AutoStart or AutoStop I A II B C D Atlas Copco Construction Tools GmbH

19 MB 00, 00 DP Spare parts list 60 Plug Oring Valve StartSelect I = AutoStop setting II = AutoStart setting (standard setting on delivery) A. Port bore in cylinder B. Wall of breaker box C. Plug of breaker box D. M 0 thread (both ends) for mounting The position of the StartSelect unit is shown on the percussion unit illustrations. 0 Atlas Copco Construction Tools GmbH

20 Spare parts list MB 00, 00 DP Optional parts 8 Floating ring Wear bush steel bronze Atlas Copco Construction Tools GmbH

21 MB 00, 00 DP Spare parts list Tightening torques Tightening torque Filling valve Threaded plug Tensioning bolt Threaded plug Threaded plug Nonreturn valve Allen screw Adapter Fitting Hydraulic hose grease line Adapter Fitting Hydraulic hose oil line Fitting Fitting Plug 30 Nm 0 Nm 00 Nm 350 Nm 00 Nm 85 Nm 5 Nm 5 Nm 6 Nm 55 Nm 55 Nm Nm 60 Nm 50 Nm 00 Nm Socket spanner size Allen key size 5 Torque wrench or Power wrench size 55. Pretighten the tensioning bolts to 500 Nm, proceeding in a crosswise fashion,. then tighten each tensioning bolt through 0 ( sides of hexagonal head) in a crosswise fashion, 3. finally tighten each tensioning bolt again through 0 ( sides of hexagonal head) in a crosswise fashion. Allen key size Allen key size Socket spanner size Allen key size 0 Openended wrench size 9 Openended wrench size 7, 9, Openended wrench size 7 Openended wrench size 9 Openended wrench size 9, Openended wrench size 9 Openended wrench size 9,, 7 Openended wrench size7,, 7 Allen key size 7 0 Atlas Copco Construction Tools GmbH

22 Spare parts list MB 00, 00 DP Working tools 3 MB 00 0 (.7) L W L T Metric W (mm) L (mm) L T (mm) Wt (kg) 3 Moil point Chisel (cross) Chisel (parallel) Blunt tool ClassicLine ClassicLine ClassicLine ClassicLine Imperial W (in.) L (in.) L T (in.) Wt (lb) 3 Moil point Chisel (cross) Chisel (parallel) Blunt tool ClassicLine ClassicLine ClassicLine ClassicLine Atlas Copco Construction Tools GmbH

23 MB 00, 00 DP Spare parts list MB 00 DustProtector 0 (.7) L W L T Metric W (mm) L (mm) L T (mm) Wt (kg) 3 Moil point Chisel (cross) Chisel (parallel) Blunt tool ClassicLine ClassicLine ClassicLine ClassicLine Imperial W (in.) L (in.) L T (in.) Wt (lb) 3 Moil point Chisel (cross) Chisel (parallel) Blunt tool ClassicLine ClassicLine ClassicLine ClassicLine Atlas Copco Construction Tools GmbH

24 Spare parts list MB 00, 00 DP Accessories Hydraulic hoses Hose Hose I.D. 5 ("), both ends M x conical seal, length 300 mm (9 in.) I.D. 5 ("), both ends M x conical seal, length 800 mm (0 in.) Optional equipment Chisel paste for ContiLube II x 500 g (. lbs) Grease gun for cartridge ContiLube II Grease nipple Service box no. I with nitrogen cylinder Service box no. III without nitrogen cylinder Test gauge lower wear bush Inside callipers upper wear bush Adapter plate matching the carrier Consult the Atlas Copco Customer Center/Dealer in your area. Base plate with threaded inserts Bolt kit Base plate through borings Bolt kit Allen key Adapter kit for underwater applications Piston retainer l 0. gal (0.53 US gal) mm for bolt kit Atlas Copco Construction Tools GmbH

25 MB 00, 00 DP Spare parts list Kits Label kit MB (707) Label kit MB 00 Label MB 00 Label working tools Label Atlas Copco Label gas pressure Lubricating symbol Label noise level Label AEM Name plate Atlas Copco Construction Tools GmbH

26 Spare parts list MB 00, 00 DP Label kit MB 00 DustProtector (737) Label kit MB 00 DustProtector Label MB 00 DustProtector Label working tools Label Atlas Copco Label gas pressure Lubricating symbol Label noise level Label AEM Name plate Atlas Copco Construction Tools GmbH

27 MB 00, 00 DP Spare parts list Seal kit Seal kit Seal Seal Oring Oring Threaded plug Oring Oring Seal Seal Oring Wiper Oring Oring Plastic parts kit Plastic parts kit Elastic pad Shock absorber Guide plate Guide plate Guide plate Tensioning bolt kit Tensioning bolt kit Tensioning bolt Washer Threaded insert Anti Seize 0 g Atlas Copco Construction Tools GmbH

28 Spare parts list MB 00, 00 DP DustProtector kit 3 5 DustProtector kit Floating ring Counter ring Guide ring Bolt Locking bush tribolid Noise protection kit Noise protection kit Cover Plug Plug Plug Lower breaker part kit Lower breaker part kit Retainer bar Bolt Plug Buffer ring Wear bush Wear bush Bolt Locking bush Chisel paste Test gauge steel Atlas Copco Construction Tools GmbH

29 MB 00, 00 DP Spare parts list Lower breaker part kit DustProtector Lower breaker part kit Base for wiper Wiper Retainer bar Bolt Plug Buffer ring Wear bush Wear bush Bolt Locking bush Chisel paste Test gauge steel Atlas Copco Construction Tools GmbH

30 Spare parts list MB 00, 00 DP Dimensions Dimensions MB 00 mm (inch) (9.9) 7 (.85) 630 (.8) Ø (.8) 60 (.0) 555 (6.) Ø0 (.7) 5 (7.5) Ø(.3) (9.9) (6.73) (.) (.53) (.38) (6.73) (.65) (.57) (.8) 30 0 Atlas Copco Construction Tools GmbH

31 MB 00, 00 DP Spare parts list Dimensions MB 00 DustProtector mm (inch) (9.9) 7 (.85) 630 (.8) Ø (3.6) 585 (3.03) 580 (6.) 0 (.7) Ø0 (.7) 7 (8.66) Ø (.3) (9.9) (6.73) (7.68) (6.73) (.57) (.65) (.8) 0 Atlas Copco Construction Tools GmbH

32

33

34

35

36 Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. 0 Atlas Copco Construction Tools GmbH