Spare parts list. Handheld core drills. Valid from serial number LPD-T LPD-RV Construction Tools PC AB No

Transcription

1 LPD T, RV Spare parts list Handheld core drills Valid from serial number LPD-T LPD-RV LPD-T LPT-RV BGF BGF Construction Tools PC AB No

2 General information This spare parts list applies to the following: Part number Description Hydraulic post driver LPD-T Hydraulic post driver LPD-RV Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions!

3 Contents Spare parts list LPD-T 1 LPD-RV 7 Remote valve 13 Tightening torque Tightening torque 15 Accessories Hoses and couplings 17 Adapters 19 Kits Seal kit 21 Label kit 23 Accumulator kit 25

4 Spare parts list LPD-T Tue Jun 30 05:50:46 MDT

5 Item Part No. Name Qty L Accumulator kit Accumulator body Diaphragm Part Description Not Available Seal ring, Ø 0.34 X 0.51 x 0.04 in. (Ø 8.7 X 13 x 1 mm) Charging screw Protective nut, M24 x 1.5 mm Valve housing, complete Valve housing Fitting Threaded plug Ball Seal ring, Ø 0.35 x 0.55 x 0.04 in. (Ø 9 x 14 x 1 mm) Check valve screw Cylinder, complete Cylinder Fitting Threaded plug Piston Allen screw Spool Guide socket Spool socket O-ring, Ø 0.94 x 0.06 in. (Ø 24 x 1.5 mm) O-ring, Ø 0.71 x 0.08 in. (Ø 18 x 2 mm) O-ring, Ø 1.26 x 0.08 in. (Ø 32 x 2 mm) O-ring, Ø 0.99 x 0.07 in. (Ø 25.1 x 1.8 mm) Lock ring Seal, Ø 1.26 x 1.57 x 0.24 in. (Ø 32 x 40 x 6 mm) Wiper, Ø 1.26 x 1.77 x 0.28 x 0.39 in. (Ø 32 x 45 x 7 x 10 mm) Seal Nipple, 1/2 in. BSP Nipple, optional, (T) For 30 lpm 1/2 in. BSP Nipple, optional, (T) For 20 lpm 1/2 in. BSP Nipple, 1/2 in. BSP Roll pin, 6 x 30 mm, 0.24 x 1.18 in O-ring, Ø 1.18 x 0.08 in. (Ø 30 x 2 mm) 1 Tue Jun 30 05:50:46 MDT

6 This page intentionally left blank Tue Jun 30 05:50:46 MDT

7 Item Part No. Name Qty L O-ring, ø6 x 2mm(ø0.24 x 0.08 in.) O-ring, 8 x 2 mm (0.31 x 0.08 in.) Back-up washer O-ring, Ø 3.23 x 0.06 in. (Ø 82 x 1.5 mm) O-ring, ø16 x 1.5 mm(ø0.63 x 0.06 in.) O-ring, Ø 0.51 x 0.06 in. (Ø 13 x 1.5 mm) Top plate Back-up washer, Ø 1.29 x 1.77 x 0.10 in. (Ø 32.7 x 45 x 2.5 mm) Lock ring Nose part, complete Nose part Anvil Bushing Locking ring, 80 mm, 3.15 in Pin housing Spring Lock pin Split ring Roll pin, 8 x 20 mm, 0.31 x 0.79 in Screw, M10 x 55 mm Hexagon head bolt Nut Washer 1 A Spring 1 B Handle Screw, M10 x 20 mm Washer M10 DIN125B Lifting bracket Screw Trigger valve kit Circlip Shim, PS 0.31 x 0.55 x 0.02 in. (PS 8 x 14 x 0.5 mm) Trigger spool Trigger rod Packing gland Spring O-ring, Ø 0.33 x 0.09 in. (Ø 8.3 x 2.4 mm) 1 Tue Jun 30 05:50:46 MDT

8 This page intentionally left blank Tue Jun 30 05:50:46 MDT

9 Item Part No. Name Qty L O-ring, Ø 0.64 x 0.09 in. (Ø 16.3 x 2.4 mm) Seal, Ø 0.31 x 0.55 x 0.14 x 0.20 in. (Ø 8 x 14 x 3.5 x 5 mm) Back-up ring Circlip Protective cap, 1/2 in. BSP Trigger lever Trigger housing Trigger Screw, M8 x 15 mm Cylinder pin, 9.53 x 25.4 mm, 3/8 x 1 in Ball, 9.53 mm, 3/8 in Screw, M5 x 8 mm Screw, M10 x 30 mm Allen screw Trigger plate Data plate 1 Comments for Page: LPD-T LOCTITE is a registered trademark of Henkel Corporation. 245 are trademarks of Henkel Corporation. (L)OCAL REMARKS A From serial no B From serial no Tue Jun 30 05:50:47 MDT

10 Spare parts list LPD-RV Tue Jun 30 05:50:49 MDT

11 Item Part No. Name Qty L Accumulator kit Accumulator body Diaphragm Part Description Not Available Seal ring, Ø 0.34 X 0.51 x 0.04 in. (Ø 8.7 X 13 x 1 mm) Charging screw Protective nut, M24 x 1.5 mm Valve housing, complete Valve housing Fitting Threaded plug Ball Seal ring, Ø 0.35 x 0.55 x 0.04 in. (Ø 9 x 14 x 1 mm) Check valve screw Cylinder, complete Cylinder Fitting Threaded plug Piston Allen screw Spool Guide socket Spool socket O-ring, Ø 0.94 x 0.06 in. (Ø 24 x 1.5 mm) O-ring, Ø 0.71 x 0.08 in. (Ø 18 x 2 mm) O-ring, Ø 1.26 x 0.08 in. (Ø 32 x 2 mm) O-ring, Ø 0.99 x 0.07 in. (Ø 25.1 x 1.8 mm) Lock ring Seal, Ø 1.26 x 1.57 x 0.24 in. (Ø 32 x 40 x 6 mm) Wiper, Ø 1.26 x 1.77 x 0.28 x 0.39 in. (Ø 32 x 45 x 7 x 10 mm) Seal Nipple, 1/2 in. BSP Nipple, optional, (T) For 30 lpm 1/2 in. BSP Nipple, optional, (T) For 20 lpm 1/2 in. BSP Nipple, 1/2 in. BSP Trigger valve 1 A O-ring, Ø 0.64 x 0.09 in. (Ø 16.3 x 2.4 mm) 1 Tue Jun 30 05:50:49 MDT

12 This page intentionally left blank Tue Jun 30 05:50:49 MDT

13 Item Part No. Name Qty L O-ring, ø6 x 2mm(ø0.24 x 0.08 in.) O-ring, 8 x 2 mm (0.31 x 0.08 in.) Back-up washer O-ring, Ø 3.23 x 0.06 in. (Ø 82 x 1.5 mm) O-ring, ø16 x 1.5 mm(ø0.63 x 0.06 in.) O-ring, Ø 0.51 x 0.06 in. (Ø 13 x 1.5 mm) Top plate Back-up washer, Ø 1.29 x 1.77 x 0.10 in. (Ø 32.7 x 45 x 2.5 mm) Lock ring Nose part, complete Nose part Anvil Bushing Locking ring, 80 mm, 3.15 in Pin housing Spring Lock pin Split ring Roll pin, 8 x 20 mm, 0.31 x 0.79 in Screw, M10 x 55 mm Hexagon head bolt Nut Washer 1 B Spring 1 C Handle Screw, M10 x 20 mm Washer M10 DIN125B Lifting bracket Screw Remote valve On/off valve Nipple, 1/2 in. BSP Male - 3/8 in. BSP Male Seal Seal Quick-release coupling, Female 1/2 in. BSP 1 D Quick-release coupling, Male 1/2 in. BSP 1 E Protective cap 1 F Tue Jun 30 05:50:49 MDT

14 This page intentionally left blank Tue Jun 30 05:50:49 MDT

15 Item Part No. Name Qty L Protective cap 1 G Tail hose, 1.8 mm, 0.07 in Roll pin, 6 x 30 mm, 0.24 x 1.18 in O-ring, Ø 1.18 x 0.08 in. (Ø 30 x 2 mm) Allen screw Data plate 1 Comments for Page: LPD-RV LOCTITE is a registered trademark of Henkel Corporation. 245 are trademarks of Henkel Corporation. (L)OCAL REMARKS A Constant activated B From serial no C From serial no D Female E Male F Male, for QRC G Female, for QRC Tue Jun 30 05:50:49 MDT

16 Spare parts list Remote valve Tue Jun 30 05:50:50 MDT

17 Item Part No. Name Qty L Remote valve O-ring Button Screw 2 Tue Jun 30 05:50:50 MDT

18 Tightening torque Tightening torque Tue Jun 30 05:50:50 MDT

19 Item Part No. Name Qty L 1 - LPD-T Allen screw - A Allen screw - B Guide socket - C Spool socket - D Nipple, 1/2 in. BSP - E Nipple, optional, (T) For 30 lpm 1/2 in. BSP - F Nipple, optional, (T) For 20 lpm 1/2 in. BSP - G Nipple, 1/2 in. BSP - H Screw, M10 x 55 mm - I Screw J 12 - LPD-RV Allen screw - B Nipple Nipple Tue Jun 30 05:50:50 MDT

20 Accessories Hoses and couplings Tue Jun 30 05:50:50 MDT

21 Item Part No. Name Qty L Connection hose, complete Hose, Ø 1/2 in. L = 16 in., Ø 12.5 mm L = 0.4 m Seal Quick-release coupling, Female 1/2 in. BSP Quick-release coupling, Male 1/2 in. BSP Protective cap 1 A Protective cap 1 B Twin hose, complete, Ø 1/2 in. L = 23 ft., Ø 12.5 mm L = 7 m Twin hose, Ø 1/2 in. L = 23 ft., Ø 12.5 mm L = 7 m Connection hose, complete, Ø 1/2 in. L = 62 in., Ø 12.5 mm L = 1.6 m Hose, Ø 1/2 in. L = 62 in., Ø 12.5 mm L = 1.6 m Label P 1 G Comments for Page: Hoses and couplings (L)OCAL REMARKS A Female B Male C Female D Male E Female F Male G Pressure side Tue Jun 30 05:50:50 MDT

22 Accessories Adapters Tue Jun 30 05:50:51 MDT

23 Item Part No. Name Qty L No. Partnumber Description - Adaptor size - Adaptor size - A Square - 54 mm2.13 in mm2.13 in Universal (round/square) - 63 mm2.48 in mm2.48 in. - B Round - Ø96 mmø3.78 in. - Ø96 mmø3.78 in. - Comments for Page: Adapters (L)OCAL REMARKS B Max. dimensions 102 x 70 mm 4 x 2 in. Tue Jun 30 05:50:51 MDT

24 Kits Seal kit Tue Jun 30 05:50:52 MDT

25 Item Part No. Name Qty L Sealkit Seal ring, Ø 0.34 X 0.51 x 0.04 in. (Ø 8.7 X 13 x 1 mm) O-ring, Ø 0.94 x 0.06 in. (Ø 24 x 1.5 mm) O-ring, Ø 0.71 x 0.08 in. (Ø 18 x 2 mm) O-ring, Ø 1.18 x 0.08 in. (Ø 30 x 2 mm) O-ring, Ø 1.26 x 0.08 in. (Ø 32 x 2 mm) O-ring, Ø 0.99 x 0.07 in. (Ø 25.1 x 1.8 mm) Lock ring Seal, Ø 1.26 x 1.57 x 0.24 in. (Ø 32 x 40 x 6 mm) Wiper, Ø 1.26 x 1.77 x 0.28 x 0.39 in. (Ø 32 x 45 x 7 x 10 mm) Seal Circlip Shim, PS 0.31 x 0.55 x 0.02 in. (PS 8 x 14 x 0.5 mm) O-ring, Ø 0.33 x 0.09 in. (Ø 8.3 x 2.4 mm) O-ring, Ø 0.64 x 0.09 in. (Ø 16.3 x 2.4 mm) Seal, Ø 0.31 x 0.55 x 0.14 x 0.20 in. (Ø 8 x 14 x 3.5 x 5 mm) Back-up ring Circlip O-ring, ø6 x 2mm(ø0.24 x 0.08 in.) O-ring, 8 x 2 mm (0.31 x 0.08 in.) Seal ring, Ø 0.35 x 0.55 x 0.04 in. (Ø 9 x 14 x 1 mm) O-ring, Ø 3.23 x 0.06 in. (Ø 82 x 1.5 mm) O-ring, ø16 x 1.5 mm(ø0.63 x 0.06 in.) O-ring, Ø 0.51 x 0.06 in. (Ø 13 x 1.5 mm) Back-up washer, Ø 1.29 x 1.77 x 0.10 in. (Ø 32.7 x 45 x 2.5 mm) Lock ring 1 Tue Jun 30 05:50:52 MDT

26 Kits Label kit Tue Jun 30 05:50:52 MDT

27 Item Part No. Name Qty L Label kit Safety label Pressure charge 1 A Product label 1 B Product label 1 C Noise level label Product label 1 D Comments for Page: Label kit (L)OCAL REMARKS A N2 B "Atlas Copco" C "LPD-T" D "LPD-RV" Tue Jun 30 05:50:52 MDT

28 Spare parts list LPD T, RV s/n , BGF Kits Accumulator kit Tue Jun 30 05:50:53 MDT

29 Item Part No. Name Qty L Accumulator kit Protective nut, M24 x 1.5 mm Seal ring, Ø 0.34 X 0.51 x 0.04 in. (Ø 8.7 X 13 x 1 mm) Charging screw Accumulator cover Diaphragm Accumulator body Filling device kit Adapter Manometer Tool for accumulator Suitcase Charging hose Charging device 1 Not Shown - Adapters 1 Tue Jun 30 05:50:53 MDT

30

31

32 Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings.