CP3650 Series CP AB & CP AB Angle Sanders

Size: px
Start display at page:

Download "CP3650 Series CP AB & CP AB Angle Sanders"

Transcription

1 32 CP AB CP AB rpm CP AB 2000 CP AB 7500

2 Index No. Parts No. Description Qty Index No. Parts No. Description Qty Adaptater Inlet Disc Spring Lever Bracket Safety lever Governor 9K (20AB) Governor 5K (075AB) Rotor Cylinder Shaft 5/8" Nut Plug A Silencer Kit 2 Silencer 3 O-Ring 5 Valve B Bushing Complete 4 Bushing 5 O-Ring 6 Pin 7 O-Ring C Valve Kit 8 Spring Conical 9 Ball 0 Valve seat O-Ring D Rear Endplate Kit 2 Bearing 22 Rear Endplate E Blades Kit 24 Blade 4 F Front Endplate Kit 27 Front Endplate 28 Plate Spacer 29 O-Ring 30 Bearing G Housing Complete Kit 7500RPM 32 Housing Stopfinger Complete 53 Greaser 3 Insulator 7500RPM 37 External cover 5 Left side brand name plate Warning label 36 Cover Adaptater Grease Kit - 5g G Housing Complete Kit 2000RPM 32 Housing 33 Stopfinger Complete 53 Greaser 3 Insulator 2000RPM 37 External cover 5 Left side brand name plate 52 Warning label 36 Cover Adaptater Grease Kit - 5g H Bevel Gear paired set (20AB) 38 Bevel gear 39 Grease Kit - 5g H Bevel Gear paired set (075AB) 38 Bevel gear 39 Grease Kit - 5g I Output Bearing Kit 40 Bearing 46 Nut 47 Deflector 48 Bearing J Motor Bearing Kit 30 Bearing 2 Bearing K Small parts kit 46 Nut 47 Deflector 23 Pin 9 Pin 4 Spring Cylindrical L Tune Up Kit Blade Kit 3 O-ring O-ring 5 O-ring 7 O-ring 29 O-ring Operator s Manual EC Declaration Sander Safety Instuctions Sanders

3 ACCESSORIES INCLUDED /8 Air Hose Nipple for /2 (3mm) ID Hose Hose Clamp Exhaust Hose Spanner Wrench 7mm Vibration-damping Side Handle Hose Clamp Vibration-damping side handle Silencer Kit with Hose Clamp (55) (- db) Reinforced Cloth-lined Exhaust Hose L=30" Grease Gun Included (24g) Grease for Bevel Gear (kg) Blades Kit (x00) Clippable Silencer (-6 db) (x00) Dust extraction kit Ø5 (25mm) for composite (non metal and metal sanding) Complete kit Suction Cap Spacer 5mm (5/8 ) Spacer 5mm (M4) Skirt with Brush Washer Screw Ventilated Backing Pad 5 with Nut M4 & 5/8 () (max. speed 2000rpm) Pin Wrench -3/ Nut (5/8 ) Nut (M4)

4 Dust extraction kit for diamond disc Ø5 (25mm) Complete kit Manifold Cutting with screws Goble Cover Plate Complete Spacer 6mm - Hole 4mm Spacer 6mm - Hole 6mm Spacer for M4 spindle Spacer for 5/8 spindle Flange Nut M Flange Nut 5/ Pin Key Semi-hard backing pad Ø5 (25mm) with nut M4 & 5/8" Semi-hard backing pad Ø5 (25mm) with nut M4 & 5/8" (max speed 2000rpm) Dust extraction kit Ø7 (80mm) for composite (non metal and metal sanding) Complete kit Suction Cap Spacer 5mm (5/8 ) Spacer 5mm (M4) Skirt with Brush Washer Screw Rigid Backing Pad 7 with nut M4 & 5/8 () (max. speed 8500rpm) Pin Wrench -3/ Nut (5/8 ) Nut (M4) Sanding guard Ø7" (80mm) Sanding Guard 7" kit Screw Hex Button M5x2 2 Washer Tooth Dec Warning Label for sanding Guard 7"

5 Sanding with spiracool pad Ø7 (80mm) 77 S0836 Spiracool Pad Hex key 5/6 Backing pad M4 & 5/8" Soft Backing Pad 7" with nut M4 & 5/8" Rigid Backing Pad 7" with nut M4 & 5/8" Nut M Nut 5/8" Pin Wrench -3/8" 2 M Rigid velcro-backed backing pad 7" Rigid velcro-backed backing pad 6" (max speed 0000rpm) 5/8" Rigid Velcro-backed Backing pad 7" Rigid velcro-backed Backing pad 6" (max speed 0000rpm)

CP3850 Series Grinders

CP3850 Series Grinders 1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 X 5 Ring screw 6156731760 1 1 1 1 1 X 6 Autobalancer

More information

CP3850 Series Grinders

CP3850 Series Grinders 1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 1 1 X 5 Ring screw 6156731760 1 1

More information

Parts Information. Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders. Save These Instructions. G1 Series (Angle)

Parts Information. Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders. Save These Instructions. G1 Series (Angle) 80156458 Edition 5 May 2014 Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders G1 Series (Angle) Parts Information Save These Instructions G1 Series (Angle) Air Grinder, Die Grinder, Sander

More information

Repair Manual and Spare Parts List

Repair Manual and Spare Parts List Hydraulic Drive Unit Type Techn. Doc. No. 362 and Accessories for Pipe Cutting Machine Darstellung kann vom Original abweichen Repair Manual and 580067000_Inst_en_Version_03 Repair General In general,

More information

Edition 3 October Air Impact Wrench and 2940 Series (D handle) Parts Information. Save These Instructions

Edition 3 October Air Impact Wrench and 2940 Series (D handle) Parts Information. Save These Instructions 04584447 Edition 3 October 2009 Air Impact Wrench 2934 and 2940 Series (D handle) Parts Information Save These Instructions 2934 and 2940 Series (D handle) Air Impact Wrench Exploded Diagram 36 49 37 36

More information

Repair Parts Parts List for RIDGID 10 Compound Miter Saw Model No. MS1065LZ RIDGID parts are available on-line at

Repair Parts Parts List for RIDGID 10 Compound Miter Saw Model No. MS1065LZ RIDGID parts are available on-line at 0. Repair Parts Model No. MS0LZ 0 0 0 0 0 FIGURE A. 0. 0 0 0 0. 0 0 WARNING: The assembly shown represents an important part of the Double Insulated System. To avoid the possibility of alteration or damage

More information

Edition 10 March Air Grinder, Die Grinder and Sander. G3 Series (Angle) Parts Information. Save These Instructions

Edition 10 March Air Grinder, Die Grinder and Sander. G3 Series (Angle) Parts Information. Save These Instructions 80153232 Edition 10 March 2015 Air Grinder, Die Grinder and Sander G3 Series (Angle) Parts Information Save These Instructions G3 Series (Angle) Air Grinder, Die Grinder and Sander Exploded Diagram - Body

More information

Edition 3 July Air Grinder. M2 Series. Parts Information. Save These Instructions

Edition 3 July Air Grinder. M2 Series. Parts Information. Save These Instructions 48420541 Edition 3 July 2015 Air Grinder M2 Series Parts Information Save These Instructions M2 Series Air Grinders - Exploded View (Motor & Motor Housing) 22 21 16 14 15 13 7 5 4 2 1 20 12 6 3 31 29 28

More information

Edition 9 March Air Grinder, Die Grinder and Sander. G2 Series (Angle) Parts Information. Save These Instructions

Edition 9 March Air Grinder, Die Grinder and Sander. G2 Series (Angle) Parts Information. Save These Instructions 04581237 Edition 9 March 2015 Air Grinder, Die Grinder and Sander G2 Series (Angle) Parts Information Save These Instructions G2 Series (Angle) Air Grinder, Air Die Grinder and Air Sander - Exploded Diagram

More information

Edition 5 September Air Grinder, Die Grinder and Sander. G2 Series (Angle) Parts Information. Save These Instructions

Edition 5 September Air Grinder, Die Grinder and Sander. G2 Series (Angle) Parts Information. Save These Instructions 04581237 Edition 5 September 2008 Air Grinder, Die Grinder and Sander G2 Series (Angle) Parts Information Save These Instructions G2 Series (Angle) Air Grinder, Air Die Grinder and Air Sander Exploded

More information

RYOBI 10 in. SLIDING MITER SAW w/laser MODEL NO. TSS100L REPAIR SHEET

RYOBI 10 in. SLIDING MITER SAW w/laser MODEL NO. TSS100L REPAIR SHEET RYOBI 10 in. SLIDING MITER SAW w/laser MODEL NO. TSS100L REPAIR SHEET 119 96 83 1 84 85 116 86 114 92 82 117 113 112 115 97 175 176 120 177 121 1 2 3 122 81 87 128 164 1 80 88 174 114 6 53 163 19 3 141

More information

D27300 Table PLANER THICKNESSER 2

D27300 Table PLANER THICKNESSER 2 D27300 Table PLANER THICKNESSER 2 D27300 Motor PLANER THICKNESSER 2 D27300 Rise & fall PLANER THICKNESSER 2 D27300 Table support PLANER THICKNESSER 2 1 860084-07 6 SCREW 3.2 x 32 No 2 868852-01 1 COVER

More information

4405-RA 4405-R 4405-RA 4405-R S

4405-RA 4405-R 4405-RA 4405-R S ACCESSORIES Page 34 Master Parts Breakdowns Updated Feb. 1st 2006 Master Parts Breakdowns Updated Feb. 1st 2006 Page 35 This tool is designed to operate on 90 psig (6.2 bar) maximum air pressure with 1/4

More information

RYOBI 10 in. SLIDING MITER SAW w/laser MODEL NO. TSS100L1 REPAIR SHEET

RYOBI 10 in. SLIDING MITER SAW w/laser MODEL NO. TSS100L1 REPAIR SHEET RYOBI 10 in. SLIDING MITER SAW w/laser MODEL NO. TSS100L1 REPAIR SHEET 32 96 119 31 1 85 116 86 114 92 82 117 113 112 115 97 1 6 121 1 84 59 81 87 122 128 34 174 80 66 88 114 19 79 78 115 117 116 125 126

More information

Output 0.9 H.P. (675 W) 9000 to R.P.M (11000rpm is standard)

Output 0.9 H.P. (675 W) 9000 to R.P.M (11000rpm is standard) HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual COLLET SPINDLE SHOWN Model Number Exhaust Direction Throttle Type 44RAE Side (L) Lever or (K) Safety Lever Speed 9000 to 11000

More information

RYOBI 10 in. (254 mm) COMPOUND MITER SAW MODEL NO. TS1340 REPAIR SHEET

RYOBI 10 in. (254 mm) COMPOUND MITER SAW MODEL NO. TS1340 REPAIR SHEET RYOBI 10 in. (54 mm) COMPOUND MITER SAW MODEL NO. TS140 REPAIR SHEET FIGURE A 1 5 4 0 1 4 1 1 15 1 1 1 14 1 11 10 5 The model number will be found on a plate attached to the motor housing. Always mention

More information

EMS-1830SC. Double Bevel Sliding Compound Mitre Saw Fig-1. Revision Date 28/06/2005

EMS-1830SC. Double Bevel Sliding Compound Mitre Saw Fig-1. Revision Date 28/06/2005 Double Bevel Sliding Compound Mitre Saw Fig-1 Double Bevel Sliding Compound Mitre Saw Fig-2 Double Bevel Sliding Compound Mitre Saw Fig-3 Double Bevel Sliding Compound Mitre Saw Fig-4 Double Bevel Sliding

More information

S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly

S/N 1H019H - 1H310H Page 1 of 33 46 Cutting Deck Assembly 1180 S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly 1180 S/N 1H019H - 1H310H Page 2 of 33 46" Cutting Deck Assembly 1 17982 1 S Reinforcement Spindle Plate 2 618-0430 1 S Spindle Assembly w/

More information

Exploded view of ROS 325 & 350, 77 mm Updated

Exploded view of ROS 325 & 350, 77 mm Updated Exploded view of ROS 325 & 350, 77 mm Updated 27.12.2016 K 25 26 38 39 40 A C 45 46 44 1 2 27 28 41 42 43 51 3 5 48 50 TO VACUUM SYSTEM FOR CENTRAL VAC 4 E 47 6 8 9 10 11 12 62 7 2.5MM ORBIT I 29 F 30

More information

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B ) Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.

More information

10LF and 12LF Series Right Angle Grinder and Sander

10LF and 12LF Series Right Angle Grinder and Sander Product Manual 4-42 0LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at http://www.apextoolgroup.com 4-42 Dotco Nomenclature XX L F 2 XX - XX XX XX

More information

BP 3050, 3050 R. Spare parts list. Bulk pulverizer. BP 3050 s/n DEQ BP 3050 R s/n DEQ

BP 3050, 3050 R. Spare parts list. Bulk pulverizer. BP 3050 s/n DEQ BP 3050 R s/n DEQ BP 3050, 3050 R Spare parts list Bulk pulverizer BP 3050 s/n DEQ169179 - BP 3050 R s/n DEQ169179-2018 Construction Tools GmbH No. 3390758101 2018-01-01 General information This spare parts list applies

More information

BP 2050, 2050 R. Spare parts list. Bulk pulverizer. BP 2050 s/n DEQ BP 2050 R s/n DEQ

BP 2050, 2050 R. Spare parts list. Bulk pulverizer. BP 2050 s/n DEQ BP 2050 R s/n DEQ BP 2050, 2050 R Spare parts list Bulk pulverizer BP 2050 s/n DEQ169181 - BP 2050 R s/n DEQ169181-2018 Construction Tools GmbH No. 3390756701 2018-01-01 General information This spare parts list applies

More information

Spare parts list. Hydraulic breakers RX Valid from serial number

Spare parts list. Hydraulic breakers RX Valid from serial number Hydraulic breakers Valid from serial number 50 www.cp.com Contents Contents General information............................................................... 5....................................................................

More information

Repair Manual and Spare Parts List

Repair Manual and Spare Parts List Pneumatic Drive Unit Type Techn. Doc. No. 352 and Accessories for Pipe Cutting Machine Darstellung kann vom Original abweichen Repair Manual and 580027000_Inst_en_Version_02 Repair General In general,

More information

EC 70T. Spare parts list. Hydraulic breakers. EC 70T s/n BES Construction Tools PC AB No

EC 70T. Spare parts list. Hydraulic breakers. EC 70T s/n BES Construction Tools PC AB No EC 70T Spare parts list Hydraulic breakers EC 70T s/n BES038596 2018 Construction Tools PC AB No. 9800159801 2018-01 General information This spare parts list applies to the following: Part number Description

More information

Parts Manual EN

Parts Manual EN Parts Manual 4- PL0- - Series Right Angle Grinder, Sander, and Router For additional product information visit our website at http://www.apextoolgroup.com 4- Dotco Nomenclature X XX - XX XX XX OH Product

More information

Exploded view of ROS 325, 77 mm Updated

Exploded view of ROS 325, 77 mm Updated Exploded view of ROS 325, 77 mm Updated 11.05.2015 K 25 38 39 40 A 45 46 26 C 44 1 2 27 28 41 42 43 51 3 5 48 50 4 E 47 TO VACUUM SYSTEM FOR CENTRAL VAC 6 8 9 7 I 29 30 H 49 52 10 31 TO INLET 53 11 12

More information

Drawing A Cylinder, Engine pan

Drawing A Cylinder, Engine pan Drawing A Cylinder, Engine pan 1 Drawing A Cylinder, Engine pan Reference Item number Qty Description 1 4180 020 1207 1 Cylinder with piston Ø 38 mm (33.2008) 2-9, 16 2 4180 025 2002 2 Valve 3 4180 025

More information

SPARE PARTS LIST PAGE 1

SPARE PARTS LIST PAGE 1 PAGE 1 001 JM23300009 HEX BOLT M8X16 2 002 JM23300010 SPRING WASHER 8 2 003 JM23300011 FLAT WASHER 8 2 004 JM23300012 RIVING KNIFE 1 005 JM23300013 PAN HEAD SCREW M6X16 1 006 JM23300300 UP BLADE GUARD

More information

10.5 gal. Vertical Oil Lubricated Air Compressor

10.5 gal. Vertical Oil Lubricated Air Compressor 10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable

More information

RIDGID 12 in. SLIDING COMPOUND MITER SAW MODEL NUMBER MS1290LZ1 FIGURE A. See Figure E

RIDGID 12 in. SLIDING COMPOUND MITER SAW MODEL NUMBER MS1290LZ1 FIGURE A. See Figure E 9 FIGURE A 77 7 8 78 1 0 8 7 1 0 19 18 17 1 1 1 1 79 9 See Figure E 11 10 7 7 80 8 9 7 9 7 81 9 8 8 0 8 8 9 8 8 9 0 1 0 7 1 1 1 9 0 1 7 70 7 7 7 7 71 1 81 7 7 PARTS LIST FOR FIGURE A 1 801 BASE/TABLE ASSEMBLY...1

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E938 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2004 10 1 (E1) 80 1 15 7 8 9 16 17 18 1 2 3 19 4 20 5 12 6 13 14 13 15 21 11 10 39 40 41 42 43 44 45 46 47 31 38 32 22 33 23 34

More information

THIS LISTING SHOWS ALL KIT COMPONENT PARTS, PLUS LISTS THE TOOL(S) THE KIT SERVICES.

THIS LISTING SHOWS ALL KIT COMPONENT PARTS, PLUS LISTS THE TOOL(S) THE KIT SERVICES. TO INFORM YOU PRODUCT SUPPORT BULLETIN # 288 TO: AUTHORIZED Portable Electric Tool SERVICE STATIONS DATE: JUNE, 1996 BRANCH OFFICE/SERVICE CENTERS, BRANCH MANAGERS REGIONAL MANAGERS, DISTRICT MANAGERS,

More information

Supplement to Spare Parts Catalogue. Model : FT Dual Transmission - F

Supplement to Spare Parts Catalogue. Model : FT Dual Transmission - F Supplement to Spare Parts Catalogue Model : FT - 60 Dual Transmission - F10001760 CONTENTS Tab. No. Sheet No. DESCRIPTION Page No. 1 101764-8 HEAD LIGHT, REAR LIGHT AND PLOUGH 1 LAMP 2 101766A-7 SHEET

More information

3M Overhaul Service Kit

3M Overhaul Service Kit SERVICE INSTRUCTIONS FOR 3M 12,000 RPM 5 in. (127 mm) and 6 in. (150 mm) RANDOM ORBITAL SANDERS 3M Overhaul Service Kit The part number 20347, 3M Overhaul Service Kit, contains all the replacement parts

More information

Spare parts list. Hydraulic breakers RX Valid from serial number

Spare parts list. Hydraulic breakers RX Valid from serial number Hydraulic breakers Valid from serial number 50 www.cp.com Contents Contents General information............................................................... 5....................................................................

More information

Sanders, Buffers & Polishers Introduction

Sanders, Buffers & Polishers Introduction Sanders, Buffers & Polishers Introduction Dotco sanders, buffers and polishers are available in a variety of styles and power ratings to provide flexibility in choosing the best tool for the job. Disc

More information

CRAFTSMAN 10 in. TABLE SAW MODEL NO REPAIR SHEET

CRAFTSMAN 10 in. TABLE SAW MODEL NO REPAIR SHEET CRAFTSMAN 10 in. TABLE SAW MODEL NO. 315.218280 REPAIR SHEET 33 1 34 2 14 15 4 5 6 16 3 7 37 11 9 8 12 10 27 13 28 29 67 30 31 68 64 32 33 43 44 41 36 35 17 18 20 19 26 25 24 21 23 22 49 47 49 50 48 51

More information

Spare parts list Trowel STG244 F TP

Spare parts list Trowel STG244 F TP Spare parts list Trowel STG244 F TP Valid from serial number Valid to serial number BGF111601- www.cp.com STG244 F TP Spare parts list General information This spare parts list applies to the following:

More information

Edition 4 March Air Grinder. 99V Series. Parts Information. Save These Instructions

Edition 4 March Air Grinder. 99V Series. Parts Information. Save These Instructions 16573313 Edition 4 March 2014 Air Grinder 99V Series Parts Information Save These Instructions 99V Series Air Grinder - Exploded View Use this drawing with part listing for models without built-in oilers

More information

Edition 2 October Air Die Grinder. M2 Series. Parts Information. Save These Instructions

Edition 2 October Air Die Grinder. M2 Series. Parts Information. Save These Instructions 48420558 Edition 2 October 2013 Air Die Grinder M2 Series Parts Information Save These Instructions M2 Series, Air Die Grinder - Exploded View (Motor & Motor Housing) 16 1 21 14 15 13 7 5 4 3 2 12 30 28

More information

1. Main structure. Main structure Jet-288 Exploded views. Bearings and impeller shaft

1. Main structure. Main structure Jet-288 Exploded views. Bearings and impeller shaft Main structure 1. Main structure Code 288A 288C 288D 288E 288F 288G 288H 288I A B Name Frame Bearings and impeller shaft Impeller Stator Steering nozzle Reversing deflector Hydraulic cylinder Hydraulic

More information

Drawing A Crankcase 041 AV SCS

Drawing A Crankcase 041 AV SCS Drawing A Crankcase 1 Drawing A Crankcase Reference Item number Qty Description 1 1110 020 2105 1 Crankcase 2-5, 9, 10, 12 2 9371 470 3120 2 Cylindrical pin 6x20 3 9048 216 1010 8 Pan head screw M5x18

More information

1. Main structure. Main structure Exploded views, AJ 288. Bearings and impeller shaft

1. Main structure. Main structure Exploded views, AJ 288. Bearings and impeller shaft Main structure 1. Main structure Code 288A 288C 288D 288E 288F 288G 288H 288I A B Name Body Bearings and impeller shaft Impeller Stator Steering nozzle Reversing deflector Hydraulic cylinder Hydraulic

More information

Parts online Spare parts list

Parts online Spare parts list Parts online Spare parts list Refer to the Parts online web page for most up to date information. The printed information might be outdated. Contents Service, repair and wear part kits Kit list 1 Mechanical

More information

10" TABLE SAW Model

10 TABLE SAW Model April 2001 INDUSTRIAL 10" TABLE SAW Model 06014739 4000 Open for Tool Illustration Pos. Part Number Description {Qty} F/C Pos. Part Number Description {Qty} F/C 1 2 0 996 864 Motor Housing 71 2 2 0 996

More information

Drawing A Crankcase TS 410, TS 420 SCS

Drawing A Crankcase TS 410, TS 420 SCS Drawing A Crankcase 1 Drawing A Crankcase Reference Item number Qty Description 1 4238 020 2901 1 Crankcase 2-4 2 9503 003 0351 1 Grooved ball bearing 15x36.3x11 3 0000 953 6606 3 Stud 4 9630 951 1696

More information

PARTS LIST. Clarke CTS10PLM 10 Table Saw Part Number:

PARTS LIST. Clarke CTS10PLM 10 Table Saw Part Number: PARTS LIST Clarke CTS10PLM 10 Table Saw Part Number: 6500741 Mitre Gauge Assembly 1 Mitre Gauge Knob NW303169-000 1 Mitre Gauge Body NW303169-000 1 Plastic Washer NW303169-000 1 Panhead Screw NW303169-000

More information

0.4 hp. Right Angle Tools

0.4 hp. Right Angle Tools 0.4 hp. Right Angle Tools Models: 50210, 50211, 50561, 50570 Lubricants: 95842 Dynabrade Air Lube 10W/NR 95848 Gear Oil Lubricant Gun: 95541 Push-Type Gun 0.4 hp. Right Angle Tools Models: 50210, 50211,

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E942 ELECTRIC TOOL PARTS LIST SLIDE COMPOUND MITER SAW Model 2005 5 20 (E1) 1 2 3 60 61 62 63 64 19 20 21 A 65 47 48 45 49 50 51 6 17 37 46 38 44 23 24 22 25 24 A 26 27 39 28 40

More information

MODELS 48 RA 48 BRA2 48 BRA4 48 BRAD 48 RAS 48 RAZ 48 RAD 48 RAC

MODELS 48 RA 48 BRA2 48 BRA4 48 BRAD 48 RAS 48 RAZ 48 RAD 48 RAC General Safety and Maintenance Manual Model Number 48BRA 48BRAZ 48BRAC 48BRAD Exhaust Direction Front or Side Throttle Type (L) Lever or (K) Safety Lever Speed 9000 to 11000 R.P.M. (11000 is Standard)

More information

Edition 4 October Air Impact Wrench Series. Parts Information. Save These Instructions

Edition 4 October Air Impact Wrench Series. Parts Information. Save These Instructions 04584595 Edition 4 October 2013 Air Impact Wrench 2902 Series Parts Information Save These Instructions 2902P and 2902SB Air Impact Wrench Housing Assembly - Exploded View 18 17 16 1 32 31 30 18 21 25

More information

rev 1_09/20/2017 PS-35C EA3500SR

rev 1_09/20/2017 PS-35C EA3500SR C 1 Tank, Handle 5 7 6 8 17 9 1 2 10 11 12 13 18 19 20 3 21 4 22 23 14 16 2 1 Tank, Handle 1 1 168507-3 TANK CAP COMPLETE 1 1 INC. 2 1 2 213080-9 O RING 29.5 1 1 1 3 163447-0 GASOLINE FILTER 1 1 1 4 195757-7

More information

RYOBI MITER SAW MODEL NUMBER TS1353DXL

RYOBI MITER SAW MODEL NUMBER TS1353DXL 0 5 8 5 0 9 9 8 9 5 59 5 0 58 5 5 5 50 8 5 5 SEE FIGURE F 0 9 8 SEE FIGURE D 5 9 8 0 5 5 5 Figure A 55 The model number will be found on a plate attached to the motor housing. Always mention the model

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification GA4030, GA4530, GA5030 Angle Grinders 100mm (4"), 115mm (4-1/2"), 125mm (5") GA4030/ GA4530/ GA5030 are small diameter

More information

Cut off saw - Starter assy and engine

Cut off saw - Starter assy and engine Cut off saw - Starter assy and engine Copyright Comet USA, Inc. 1/9/2015 1-13 Cut off saw - Starter assy and engine Ref.Nu Qty Part number Description Validity from Validity till Notes Bulletin 1 4 097000092AR

More information

RYOBI 10 in. TABLE SAW MODEL NUMBER RTS10G REPAIR SHEET

RYOBI 10 in. TABLE SAW MODEL NUMBER RTS10G REPAIR SHEET RYOBI 10 in. TABLE SAW MODEL NUMBER RTS10G REPAIR SHEET 1 1 6 1 6 0 9 9 6 0 6 1 0 9 9 0 6 0 1 1 1 1 16 10 11 1 1 19 1 0 See Figure E 9 See Figure D See Note Page 11 9 FIGURE A 60 9 1 1 60 61 6 1 6 6 6

More information

Brushcutter Emak S.p.A.

Brushcutter Emak S.p.A. Brushcutter - Motor Meccanografico RE 005145 C/C Postale 11178423 Partita IVA 00130010358 Codice Fiscale 00130010358 1 / 21 Meccanografico RE 005145 C/C Postale 11178423 Partita IVA 00130010358 Codice

More information

Table of contents Copyright ANDREAS STIHL AG & Co. KG 2017 (3)

Table of contents Copyright ANDREAS STIHL AG & Co. KG 2017 (3) 03-2016 USA Table of contents FS 94, FS 94 C, FS 94 R, FS 94 RC 4 Crankcase, Cylinder 6 Rewind starter 8 Rewind starter ErgoStart/Easy2Start 10 Muffler, Shroud, Ignition system 12 Fuel tank 14 Air filter,

More information

Edition 14 August Air Impact Wrench. Models 1712B2 and 1712P2. Parts Information. Save These Instructions

Edition 14 August Air Impact Wrench. Models 1712B2 and 1712P2. Parts Information. Save These Instructions 03531753 Edition 14 August 2012 Air Impact Wrench Models 1712B2 and 1712P2 Parts Information Save These Instructions Model 1712B2 Air Impact Wrench - Exploded View 53 43 45 36 44 37 45A 47 35 45B 34A 56

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST ELECTRIC TOOL PARTS LIST SLIDE COMPOUND SAW Model LIST E925 2001 9 14 (E2) - 2 - - 3 - - 4 - PARTS CODE DESCRIPTION 1 949-258 MACHINE SCREW M6X20 (10 PCS.) 6 2 998-818 TABLE INSERT 2 3 949-215 MACHINE

More information

Edition 3 December Air Grinder. 88V Series. Parts Information. Save These Instructions

Edition 3 December Air Grinder. 88V Series. Parts Information. Save These Instructions 16573305 Edition 3 December 2009 Air Grinder 88V Series Parts Information Save These Instructions 88V Series Air Grinder Exploded Diagram 42 41 27 56 57 48 28 34 30 29 32 31 33 35 38 37 40 21 20 36 21A

More information

Repair Parts Parts List For RIDGID 12" Compound Miter Saw Model No. MS12502 RIDGID parts are available on-line at

Repair Parts Parts List For RIDGID 12 Compound Miter Saw Model No. MS12502 RIDGID parts are available on-line at Parts List For RIDGID " Compound Miter Saw Model MS0 Figure 0 0 0 0 Parts List For RIDGID " Compound Miter Saw Model MS0 Figure Always order by part number - not by key number 0 0 0-0- 0-0 -0 0 0 00 Fence

More information

PARTS MANUAL. Time Saver Wide Cut Mower. I N E CUB G E N U

PARTS MANUAL. Time Saver Wide Cut Mower. I N E CUB  G E N U PARTS MANUAL Time Saver Wide Cut Mower G E N U FAC TORY I N E PARTS 1-800-965-4CUB www.cubcadet.com FORM NO. 69-03049 PRINTED IN U.S.A. CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 1/29/200

More information

STARK 2500 S (Euro 2) Brushcutter. Documenten. STARK 2500 S (Euro 2) Brushcutter. Engine. Starter assy and clutch. Tank and air filter.

STARK 2500 S (Euro 2) Brushcutter. Documenten. STARK 2500 S (Euro 2) Brushcutter. Engine. Starter assy and clutch. Tank and air filter. Documenten Engine Starter assy and clutch Tank and air filter Transmission Carburettor WYL-245 Accessories Illustrated part list (Head "Load & Go" D.130) 20-2-2018 Pagina 1-16 Illustratie Engine STARK

More information

Hydraulic Angle Grinder for Underwater Use Type

Hydraulic Angle Grinder for Underwater Use Type M a s c h i n e n f a b r i k G m b H Hydraulic Angle Grinder for Underwater Use Type 1 1585 0010 Illustration can differ from the original Repair Manual and Spare Parts List Compiled: 18.01.13 115850010_Inst_en_Version_03

More information

Pneumatic Circular Saw. Type Illustration can differ from the original. Spare Parts List

Pneumatic Circular Saw. Type Illustration can differ from the original. Spare Parts List Pneumatic Circular Saw Type Illustration can differ from the original Cleaning Regular cleaning is required for a continuous and proper operation. Clean the housing regularly with a soft cloth, it is important

More information

MG 400. Spare parts list. Multi grapple. MG 400 s/n BGF Construction Tools GmbH No

MG 400. Spare parts list. Multi grapple. MG 400 s/n BGF Construction Tools GmbH No MG 400 Spare parts list Multi grapple MG 400 s/n BGF074759-2016 Construction Tools GmbH No. 3390774801 2016-07-21 General information This spare parts list applies to the following: Part number Description

More information

Exploded view of OS 353CV, 81 x 133 mm Updated

Exploded view of OS 353CV, 81 x 133 mm Updated Exploded view of OS 353CV, 81 x 133 mm Updated 11.05.2015 1 2 27 28 50 51 52 A 57 58 L 3 5 6 8 9 10 4 E 7 31 J 38 29 30 32 33 34 53 54 I 55 56 C D 59 60 61 62 63 11 F 12 39 35 36 37 73 13 40 TO INLET 71

More information

Edition 2 May Air Drill. 6L Series. Parts Information. Save These Instructions

Edition 2 May Air Drill. 6L Series. Parts Information. Save These Instructions 45612710 Edition 2 May 2014 Air Drill 6L Series Parts Information Save These Instructions Air Drill 6L Series Motor and Gearing Exploded Diagram 28 26 25 23 24 22 18 21 20 19 1 2 6 14 13 10 5 12 11 7 3

More information

WE LISTEN. WE OBSERVE. WE OPTIMIZE. REBEL 2.8 HP SERIES 7" & 9" GRINDERS AND SANDERS

WE LISTEN. WE OBSERVE. WE OPTIMIZE. REBEL 2.8 HP SERIES 7 & 9 GRINDERS AND SANDERS WE LISTEN. WE OBSERVE. WE OPTIMIZE. REBEL 2.8 HP SERIES 7" & 9" GRINDERS AND SANDERS REBEL 2.8 HP SERIES 7" & 9" GRINDERS AND SANDERS Rebel series grinders and sanders are powerful tools designed to overcome

More information

13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly

13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly 13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly 13AU609H063 (1999) Page 2 of 25 Axle & Wheels Front And Steering Assembly 1 683-0304 1 S Frame 2 710-0604A 1 /P Self-tapping Screw,

More information

8¼ COMPOUND MITER SAW

8¼ COMPOUND MITER SAW 36-040 8¼ COMPOUND MITER SAW MB-2 PART NO. 899994 Revised: 05/23/2001 Page1/ MB-2/DEB Ref. REPLACEMENT PARTS No. Part No. Description 1 36-040 SPECIAL SCREW 2 904-01-010-1605 3/8" FLAT WASHER 3 1343275

More information

PARTNERIllustrated Parts List CD

PARTNERIllustrated Parts List CD PARTNERIllustrated Parts List 2000-05 CD K2300 EL - 12 1993-2000 K2300 EL -14 1997-2000 Identify by a Green or Silver colored serial number plate 108 30 01-12 505 53 03-03 505 53 03-02 506 15 07-01 531

More information

370BS / RM-A375CE / B116A

370BS / RM-A375CE / B116A 370BS / RM-A375CE / B116A BACON AND COOKED MEAT SLICER SERVICE INSTRUCTIONS 19/03/2010. 76103-766 ENGLISH Issue 2 CONTENTS Table of Contents: 1 INTRODUCTION 2 SAFETY 3 INSTALLATION AND OPERATION 4 ELECTRICAL

More information

S/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly

S/N 1H019H - 1H310H Page 1 of 48 42 Cutting Deck Assembly 1170 S/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly 1170 S/N 1H019H - 1H310H Page 2 of 48 42" Cutting Deck Assembly 4 683-0254 1 S Deck Adjustment Bracket w/ Weld Nut 9 710-0528 1 /P Hex Cap

More information

Drawing A Crankcase, Cylinder

Drawing A Crankcase, Cylinder Drawing A Crankcase, Cylinder 1 Drawing A Crankcase, Cylinder Reference Item number Qty Description 1 4241 021 0300 1 Crankcase 2 9639 003 1230 2 Oil seal 12x22x7 3 9523 003 0000 2 Grooved ball bearing

More information

HENRY TOOLS. General Safety and Maintenance Manual MODELS 4402-RAS 4402-RASK 4402-RASC

HENRY TOOLS. General Safety and Maintenance Manual MODELS 4402-RAS 4402-RASK 4402-RASC HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual K C Model Number 4402RAS 4402RAC Exhaust Direction Front or Side Throttle Type (L) Lever or (K) Safety Lever Speed 13500 R.P.M.

More information

Mid-Size ProLine, T-Bar, Gear Drive 13 HP with 91cm Side Discharge Mower

Mid-Size ProLine, T-Bar, Gear Drive 13 HP with 91cm Side Discharge Mower Form Number 3350-754 Rev B Mid-Size ProLine, T-Bar, Gear Drive 13 HP with 91cm Side Discharge Mower Model No. 30314TE - 250000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts,

More information

3,200 RPM Angle-Head WARNING

3,200 RPM Angle-Head WARNING Model: 50046 Angle-Head Kit 54002 Mini-Dynorbital Sander 54003 Mini-Dynorbital Sander 50223 2" Disc Sander 51091 Die Grinder 53026 Drill 50047 3" Buffer 50070 Finesse Sanding Kit Parts Page Reorder No.

More information

Page 6. Page 7-8. Page 2. Page 3. Page 4-5. Page 9. PTO : Page PR003-PP01

Page 6. Page 7-8. Page 2. Page 3. Page 4-5. Page 9. PTO : Page PR003-PP01 Parts manual Blecavator 14 + 210 Page 01 Code 1 Page 6 Page - 8 Page 2 Page Page 4 - Page 9 PTO : Page 10 12PR00-PP01 Blecavator 14 + 210 Page 02 Code 1 4 28 22 4 0 19 26 19 21 2 4 4 2 1 2 2 2 1 29 20

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E944 ELECTRIC TOOL PARTS LIST COMPOUND MITER SAW Model 2005 10 5 (E1) 73 1 14 1 2 3 4 5 6 7 11 8 9 10 30 30 12 13 17 18 12 14 31 19 15 16 32 33 20 21 22 23 34 35 A 24 25 26 38

More information

CRAFTSMAN COMPOUND MITER SAW MODEL NUMBER REPAIR SHEET

CRAFTSMAN COMPOUND MITER SAW MODEL NUMBER REPAIR SHEET CRAFTSMAN COMPOUND MITER SAW MODEL NUMBER 5.50 REPAIR SHEET CRAFTSMAN COMPOUND MITER SAW MODEL NUMBER 5.50 Figure A 4 5 7 8 0 4 5 7 8 0 5 4 7 8 0 5 4 5 7 8 40 4 4 4 44 45 4 4 47 48 50 4 5 5 4 5 54 5 55

More information

COMPRESSORS 09/97 CB-5C-050. Suggested Spare Parts for LB601 and LB601A Compressors: Qty./ Unit

COMPRESSORS 09/97 CB-5C-050. Suggested Spare Parts for LB601 and LB601A Compressors: Qty./ Unit 09/97 CB-5C-050 Suggested Spare Parts for LB601 and LB601A Compressors: Part # Description Qty./ Unit Comm. Qty. 794099 Gasket Set - Buna-N, Aluminum T 1 1 1 794259 Suction Valve Sub-Assembly T 2 2 794279

More information

Edition 2 July Air Impact Wrench. 2934P2 and 2940P2. Parts Information. Save These Instructions

Edition 2 July Air Impact Wrench. 2934P2 and 2940P2. Parts Information. Save These Instructions 04584470 Edition 2 July 2008 Air Impact Wrench 2934P2 and 2940P2 Parts Information Save These Instructions 2934P2 and 2940P2 Air Impact Wrench Exploded Diagram 60 59 16 18 10 15 9 8 7 6 5 4 14 1 13 3 2

More information

MODELS 44 ARA 44 ARAC 44 RA4 44 RA2

MODELS 44 ARA 44 ARAC 44 RA4 44 RA2 General Safety and Maintenance Manual Model 44ARA Angle Grinder with 4 guard. Model 44ARAC Angle Grinder with built in 1/4 collet for use with carbide burrs. Model 44ARAZ Angle Grinder with spiral cool

More information

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B ) PARTS LIST FOR NO. SERIES AM ANGLE TOOLS Form ZA Date 0March/F Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM).

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E943 ELECTRIC TOOL PARTS LIST COMPOUND MITER SAW Model 2005 10 5 (E1) 83 1 14 1 2 3 4 5 6 7 11 8 9 10 39 39 12 13 19 20 12 14 40 21 15 16 41 42 22 23 24 25 17 18 43 44 37 38 A

More information

Spare parts list. Hydraulic breakers RX 3.

Spare parts list. Hydraulic breakers RX 3. Hydraulic breakers www.cp.com 9800 05 0c Contents Contents General information............................................................... 5....................................................................

More information

1.1/2" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer)

1.1/2 - Air Impact Wrench (Twin Hammer) 1 - Air Impact Wrench (Twin Hammer) 1 - Air Impact Wrench (Twin Hammer) Impact Wrenches 13000-2 Anvil Length Bolt Capacity Overall Length Torque (5s) 12000-2 8" 3,700rpm 2,000 ft-lbs 10kg 2" 3,700rpm 2,000 ft-lbs 7.7kg 3/4" - Air Impact Wrench (Single Hammer) 1266 2" 3,700rpm

More information

Parts Breakdown DCS9010

Parts Breakdown DCS9010 Page 1 of 12 2/8/2008 Page 2 of 12 2/8/2008 Page 3 of 12 2/8/2008 Page 4 of 12 2/8/2008 Page 5 of 12 2/8/2008 Page 6 of 12 2/8/2008 Page 7 of 12 2/8/2008 Page 8 of 12 2/8/2008 Fig # Part ID Part Name Quantity

More information

Form Edition 1 November Air Impact Wrench. 2934P2 and 2940P2. Parts Information. Save These Instructions

Form Edition 1 November Air Impact Wrench. 2934P2 and 2940P2. Parts Information. Save These Instructions Form 04584470 Edition 1 November 2004 Air Impact Wrench 2934P2 and 2940P2 Parts Information Save These Instructions 2934P2, and 2940P2 Air Impact Wrench Exploded Diagram (Dwg. TPA1337-1) 2 Form 04584470-Edition

More information

Edition 2 February Air Angle Wrenches. 9RS, 9S and 9T Series. Parts Information. Save These Instructions

Edition 2 February Air Angle Wrenches. 9RS, 9S and 9T Series. Parts Information. Save These Instructions 16574089 Edition 2 February 2014 Air Angle Wrenches 9RS, 9S and 9T Series Parts Information Save These Instructions 9RS, 9S and 9T Angle Wrench - Exploded View 25 19 21 20 22 2A 23 18 2 3 3A 4 24 10 8

More information

Sanders & Polishers. Sanders & Polishers

Sanders & Polishers. Sanders & Polishers 35 Non-Vacuum (NV) Self Vacuum (SV) Central Vacuum (CV) Select the right random orbital for your applications MODEL PAD SIZE ORBIT PAD TYPE 2 Handed in. mm in. mm Non- Vacuum (NV) CP7225-3 3 75 3/32 2.5

More information

For maximum material removal with minimum effort, choose the best tool.

For maximum material removal with minimum effort, choose the best tool. RediPower For maximum material removal with minimum effort, choose the best tool. How to select your Grinder Collet grinders Choose your tool, then your accessory: carbide burrs, mounted points, brushes,

More information

SPARE PARTS LIST. BRUSHCUTTERS/CLEARING SAWS 343 R from

SPARE PARTS LIST. BRUSHCUTTERS/CLEARING SAWS 343 R from SPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS 343 R from 2014-12 ACCESSORIES 343 R from 2014-12 ACCESSORIES 343 R from 2014-12 Ref Part No Description Remark QTY KIT 1 502 21 60-13 ACCESSORY BAG 1 2 501

More information

Disassembly Instructions hp. Mini-Dynafile II

Disassembly Instructions hp. Mini-Dynafile II Disassembly Instructions - 0.4 hp. Mini-Dynafile II Important: Use these instructions along with the tool parts page or manual. Notice: Shut off the air supply and depress throttle lever to deplete the

More information

SECTION 12: ILLUSTRATED PARTS LIST

SECTION 12: ILLUSTRATED PARTS LIST SECTION : ILLUSTRTED S LIST (for choke) (for throttle) 0 0-0 Screw, #- x.0 0-0 Screw, /- x.0 0-0 Screw, /- x.0 0- Screw, #0- x. 0- Socket Cap Screw, /- x. 0- Self-tapping Screw, /- x. -00 Flange Lock Nut,

More information

DS 3000 T (EPA 3) Brushcutter. Documents. DS 3000 T (EPA 3) Brushcutter. Engine. Starter assy and clutch. Tank and air filter.

DS 3000 T (EPA 3) Brushcutter. Documents. DS 3000 T (EPA 3) Brushcutter. Engine. Starter assy and clutch. Tank and air filter. Documents Engine Starter assy and clutch Tank and air filter Transmission Carburetor WT-1150 Accessories Illustrated parts list (Head "Load&Go" D.130) 4/26/2016 Page 1-16 Illustration Engine 4/26/2016

More information