DC Spare parts list. Transverse Drum Cutters. DC 2100 s/n DEQ Construction Tools GmbH No

Transcription

1 DC 2100 Spare parts list Transverse Drum Cutters DC 2100 s/n DEQ Construction Tools GmbH No

2 General information This spare parts list applies to the following: Part number Description Transverse drum cutter DC 2100 Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions! Instructions for ordering It is essential to indicate the serial number of the hydraulic attachment when ordering spare parts! Determine the quantity of individual parts which are required and need to be ordered. The order must indicate the following details: full identification code of the hydraulic attachment required quantity part number description

3 Contents Service, repair and wear part kits Label kit 1 Mechanical Transverse Drum Cutter, part 1 3 Transverse Drum Cutter, part 2 6 Transverse Drum Cutter, part 3 9 Tightening torques 11 Dimensions 13 Options / accessories Hydraulic hoses 14 Optional equipment 17 Working tools 19

4 Service, repair and wear part kits Label kit Mon Jun 29 06:15:48 MDT

5 Item Part No. Name Qty L Label kit 1 Mon Jun 29 06:15:48 MDT

6 Mechanical Transverse Drum Cutter, part 1 Mon Jun 29 06:15:50 MDT

7 Item Part No. Name Qty L Gear housing Plug Seal Output shaft Lock ring Output cogwheel Housing (output shaft) Sealing cover Rotatable upper part Inner race (tapered roller bearing) Outer race (tapered roller bearing) Seal Shaft nut Allen screw Allen screw Allen screw Usit-ring O-ring O-ring Bolt Idle cogwheel Cover Allen screw Spring washer Cylindrical roller bearing Allen screw O-ring O-ring Locking nut Drive shaft Spur gear Cover Flange (motor) Tapered roller bearing Tapered roller bearing Allen screw O-ring 1 Mon Jun 29 06:15:50 MDT

8 Item Part No. Name Qty L O-ring Seal Washer (drum cutter) Clamping sleeve Cover (motor) Hexagon head screw Centering pin Plate (centering pin) Allen screw Allen screw Hexagon head screw Hexagonal nut Allen screw Cover (motor) Distribution housing (motor) Cam ring Cover Clyinder block Tension pin (motor) Hexagon head screw Allen screw Allen screw O-ring O-ring Fitting sleeve (motor) Pair of lock washers 11 Mon Jun 29 06:15:50 MDT

9 Mechanical Transverse Drum Cutter, part 2 This page intentionally left blank Mon Jun 29 06:15:50 MDT

10 Mon Jun 29 06:15:50 MDT

11 Item Part No. Name Qty L Cutter drum (left) Cutter drum (right/motor) Round attack pick 17-Q DC 48 A 16 - Quick snap retainer 48 A Pick box Wear sleeve Hydraulic motor 1 Comments for Page: Transverse Drum Cutter, part 2 (L)OCAL REMARKS A see chapter Working tools Mon Jun 29 06:15:50 MDT

12 Mechanical Transverse Drum Cutter, part 3 Mon Jun 29 06:15:51 MDT

13 Item Part No. Name Qty L Hydraulic hose, I.D. 25 (1"), JIC 1 5/16" / JIC 1 5/16" 45, length 2500 mm (98.43 in.) 2 A Hydraulic hose, I.D. 19 (0.75"), JIC 1 1/16" / JIC 1 1/16" 45, length 2500 mm (98.43 in.) 1 A Allen screw Allen screw Pair of lock washers Flange Fitting Fitting Plug Plug O-ring Check valve Fitting 1 Comments for Page: Transverse Drum Cutter, part 3 (L)OCAL REMARKS A see chapter Options / accessories Mon Jun 29 06:15:51 MDT

14 Mechanical Tightening torques Mon Jun 29 06:15:52 MDT

15 Item Part No. Name Qty L 75 - Allen screw Nm - A 76 - Hexagon head screw Nm - B Comments for Page: Tightening torques (L)OCAL REMARKS A Allen key size 19 B Open-ended wrench size 36 Mon Jun 29 06:15:52 MDT

16 Mechanical Dimensions Mon Jun 29 06:15:52 MDT

17 Options / accessories Hydraulic hoses This page intentionally left blank Mon Jun 29 06:15:53 MDT

18 Mon Jun 29 06:15:53 MDT

19 Item Part No. Name Qty L Not Shown - Pressure and Tank line Hydraulic hose, I.D. 25 (1"), JIC 1 5/16" / JIC 1 5/16" 45, length 2500 mm (98.43 in.) 2 Not Shown - Leakage oil line Hydraulic hose, I.D. 19 (0.75"), JIC 1 1/16" / JIC 1 1/16" 45, length 2500 mm (98.43 in.) 1 Mon Jun 29 06:15:53 MDT

20 Options / accessories Optional equipment Mon Jun 29 06:15:53 MDT

21 Item Part No. Name Qty L Hydraulic filter for leakage oil Filter catridge for leakage oil 1 Not Shown - Adapter plate matching the carrier. Consult the Atlas Copco Customer Center/Dealer in your area Base plate with threaded inserts Bolt kit Base plate with through borings Bolt kit Allen key (22 mm) Knock out tool Knock out tool for stuck picks Puller tool for quick snap retainers 1 Mon Jun 29 06:15:53 MDT

22 Options / accessories Working tools Mon Jun 29 06:15:53 MDT

23 Item Part No. Name Qty L Box of picks, Pick 17-Q DC 2000/2100/2900, contains 10 picks and 10 quick snap retainers Box of picks, Pick 15-Q DC 2000/2100/2900, contains 10 picks and 10 quick snap retainers Box of picks, Pick 19-Q DC 2000/2100/2900, contains 10 picks and 10 quick snap retainers Box of picks, Pick 22-Q DC 2000/2100/2900, contains 10 picks and 10 quick snap retainers Box of picks, Pick 25-Q DC 2000/2100/2900, contains 8 picks and 8 quick snap retainers 1 A 1 B 1 C 1 D 1 E QuickSnap set, contains 10 quick snap retainers 1 Comments for Page: Working tools (L)OCAL REMARKS A ØT = 17 mm (0.67 in.) B ØT = 15 mm (0.59 in.) C ØT = 19 mm (0.75 in.) D ØT = 22 mm (0.87 in.) E ØT = 25 mm (0.98 in.) Mon Jun 29 06:15:54 MDT

24 Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings.