LHD. Spare parts list 23 M. Rock drills Construction Tools PC AB No

Transcription

1 LHD 23 M Spare parts list Rock drills 2015 Construction Tools PC AB No

2 General information This spare parts list applies to the following: Part number Description (clockwise rotation) (counter clockwise rotation) Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions!

3 Kits/Consumables 1 Contents Spare parts list 3 Handle standard 10 Labels 13 Working tools Hexagon 22 x 108 mm 15 Accessories Hoses and couplings 17 Kits Seal kit 19 Accumulator kit 21

4

5 Kits/Consumables Wed Nov 25 04:38:24 MST

6 Item Part No. Name Qty L Seal kit Accumulator kit Hexagon 22 x 108 mm 1 Wed Nov 25 04:38:24 MST

7 Spare parts list Wed Nov 25 04:38:26 MST

8 Item Part No. Name Qty L Chisel retainer complete Gear flange Bushing Striking piston Flange socket Pipe holder Drain pipe Tightening plate Stay bolt long Stay bolt short Washer 1 A Spring 1 B Coupling nut 1 C Thrust washer O-ring, 60 x 2 mm (2.36 x 0.08 in.) Screw, M10 x 30 mm Screw, M6 x 12 mm O-ring, 9.13 x 2.62 mm (0.36 x 0.1 in.) O-ring, 20 x 2 mm (0.79 x 0.08 in.) O-Ring, 16 x 2 mm (0.63 x 0.08 in.) Screw, M8 x 35 mm, Use LOCTITE Screw, M8 x 50 mm Back-up ring, 10 x 14 mm (0.39 x 0.55 in.) Screw, M6 x 10 mm O-ring, ø6 x 2mm(ø0.24 x 0.08 in.) Cylinder pin, 8 x 14 mm, 0.31 x 0.55 in Grease nipple, 1/8 in. RG O-Ring, 40 x 3 mm (1.57 x 0.12 in.) Washer, 14 mm, 0.55 in Nut, MF 14 x 1.5 mm Seal ring - Bounded seal - Oil outlet 3/8 USS Stop screw, M6 x 12 mm Loctite D U-seal ring 1/2 1 E Protective cap, for 1/2 in. BSP O-ring, Ø 0.47 x 0.06 in. (Ø 12 x 1.5 mm) O-ring, Ø 2.72 x 0.06 in. (Ø 69 x 1.5 mm) 1 Wed Nov 25 04:38:26 MST

9 This page intentionally left blank Wed Nov 25 04:38:26 MST

10 Item Part No. Name Qty L Ina ring IR, Ø45/50 x 25 mm, Ø1.77/1.96 x 0.98 in Ina ring IR, Ø45/50 x 25 mm, Ø1.77/1.96 x 0.98 in O-ring, Ø 0.51 x 0.06 in. (Ø 13 x 1.5 mm) Nipple, 1/2 in. BSP 2 F Valve housing Guide socket P Auxiliary spool P Guide socket T Auxiliary spool T Spool Sealing washer Screw 1 G O-ring, Ø 0.95 x 0.12 in. (Ø 24.2 x 3 mm) O-ring, Ø 1.30 x 0.08 in. (Ø 33 x 2 mm) Blind nut, Ø3 mm, Ø0.12 in O-Ring, 21 x 2 mm (0.83 x 0.08 in.) Seal ring, 7 / 10 x 1 mm (0.28 / 0.39 x 0.04 in.) Steel ball, Ø4.5 mm, Ø0.18 in Roll pin, Ø5 x 20 mm, 0.20 x 0.79 in Motor flange Gear wheel Back-up washer Packing gland Coupling nut O-ring, ø6 x 2mm(ø0.24 x 0.08 in.) Motor 1 H Hydralic motor 1 I Screw, M8 x 15 mm Screw Accumulator, complete Diaphragm Accumulator cover Accumulator body Charging screw Seal ring, Ø 0.34 X 0.51 x 0.04 in. (Ø 8.7 X 13 x 1 mm) Protective cap, M24 x 1.5 mm Cylinder 1 Wed Nov 25 04:38:26 MST

11 This page intentionally left blank Wed Nov 25 04:38:26 MST

12 Item Part No. Name Qty L Seal ring, 28 / 36 x 5.7 mm (1.10 / 1.42 x 0.22 in.) Seal, 28 / 38 x 7 / 10 mm (1.10 / 1.5 x 0.28 / 0.39 in.) Fitting 3 J Circlip Back-up washer, 28.7 x 38 x 2 mm (1.13 x in.) Trigger plate Spacer pipe Screw, M8 x 16 mm, Use LOCTITE Trigger spool Trigger rod Packing gland Spring O-ring, Ø 0.33 x 0.09 in. (Ø 8.3 x 2.4 mm) O-ring, Ø 0.64 x 0.09 in. (Ø 16.3 x 2.4 mm) Seal, Ø 0.31 x 0.55 x 0.14 x 0.20 in. (Ø 8 x 14 x 3.5 x 5 mm) Back-up ring Circlip 1 K Circlip 2 L Plug 1 M Torque limiter Spring 1 N Seal ring, 3.17 mm (1 8 in.) 1 O Air valve O-ring, Ø10 x 2 mm (Ø0.39 x 0.07 in.) Screw Roll pin, Ø8 x 50 mm, Ø0.31 x 1.96 in Tip, Ø8 mm, Ø0.31 in Connecting block Fitting 2 P Plastic plug, 6.35 mm (1 4 in.) 1 Q Comments for Page: LOCTITE is a registered trademark of Henkel Corporation. 648 is a trademark of Henkel Corporation. (L)OCAL REMARKS A for spring B for chisel retainer Wed Nov 25 04:38:27 MST

13 C for spring D 50 ml 1.70 oz E Bonded seal 1/2in. BS F 1/2in. BSP M - 1/2in. BSP M G for check valve H OMM 32, clockwise rotation I OMM 32, counter-clockwise rotation J 02 KRG K SB 12 L SW 8 M G 1/8in. incl. seal N for tourqe limiter O Bonded seal 1/8in. BSP P 02 KRG Q 1/4in. Wed Nov 25 04:38:27 MST

14 This page intentionally left blank Wed Nov 25 04:38:27 MST

15 Spare parts list Handle standard Wed Nov 25 04:38:28 MST

16 Item Part No. Name Qty L Handle standard, complete 1 A Handle standard Rubber handle Rubber handle Trigger 1 B Roll pin, Ø 0.31 x 1.6 in., Ø 8 x 40 mm Top cover Bolt, M10 x 20 mm Nab Spacer Bracket Nylon guide Screw, M6 x 30 mm Washer nylon, Ø 0.83 x 1.46 x 0.12 in., Ø 21 x 37 x 3 mm Lock plate Safety trigger Spring Nut, M6 1 Comments for Page: Handle standard (L)OCAL REMARKS A With plastic cover B Standard Wed Nov 25 04:38:28 MST

17 Spare parts list Labels Wed Nov 25 04:38:28 MST

18 Item Part No. Name Qty L Not Shown - Labels Safety label Pressure charge Product label "Atlas Copco" 2 C EHTMA Category C 1 D Comments for Page: Labels (L)OCAL REMARKS C Atlas Copco D Category C, 20l/min Wed Nov 25 04:38:29 MST

19 Working tools Hexagon 22 x 108 mm Wed Nov 25 04:38:29 MST

20 Item Part No. Name Qty L ,05-02 Drill steel 1 A ,05-02 Drill steel 1 B ,05-02 Drill steel 1 C ,05-02 Drill steel 1 D ,05-02 Drill steel 1 E ,05-02 Drill steel 1 F Comments for Page: Hexagon 22 x 108 mm (L)OCAL REMARKS A W= 34mm, L=800 mm, Wt=3.0 kg B W= 33mm, L=1600 mm, Wt=5.2 kg C W= 32mm, L=2400mm, Wt=8.0 kg D W= 31mm, L=3200mm, Wt=10.2 kg E W= 30mm, L=4000mm, Wt=12.9 kg F W= 29mm, L=4800mm, Wt=15.1 kg Wed Nov 25 04:38:30 MST

21 Accessories Hoses and couplings Wed Nov 25 04:38:30 MST

22 Item Part No. Name Qty L Connection hydraulic hose, complete Hose, Ø 1/2 in. L = 16 in., Ø 12.5 mm L = 0.4 m U-seal ring 1/ Quick-release coupling, Female 1/2 in. BSP Quick-release coupling, Male 1/2 in. BSP Protective cap 1 A Protective cap 1 B Twin hose, complete, Ø 1/2 in. L = 23 ft., Ø 12.5 mm L = 7 m Twin hose, Ø 1/2 in. L = 23 ft., Ø 12.5 mm L = 7 m Connection hose, complete, Ø 1/2 in. L = 62 in., Ø 12.5 mm L = 1.6 m Hose, Ø 1/2 in. L = 62 in., Ø 12.5 mm L = 1.6 m U-seal ring 1/ Quick-release coupling, Female 1/2 in. BSP Quick-release coupling, Male 1/2 in. BSP Protective cap Protective cap Label P 1 C Flushing hose, Ø ½ in. L=20 in., Ø12,5mm L=500mm Male coupling NIP 15 H Female coupling QIC15 H13 1 Comments for Page: Hoses and couplings (L)OCAL REMARKS A Female B Male C Pressure side Wed Nov 25 04:38:31 MST

23 Kits Seal kit Wed Nov 25 04:38:33 MST

24 Item Part No. Name Qty L Seal kit O-ring, 60 x 2 mm (2.36 x 0.08 in.) O-ring, 9.13 x 2.62 mm (0.36 x 0.1 in.) O-ring, 20 x 2 mm (0.79 x 0.08 in.) O-Ring, 16 x 2 mm (0.63 x 0.08 in.) Back-up ring, 10 x 14 mm (0.39 x 0.55 in.) O-ring, ø6 x 2mm(ø0.24 x 0.08 in.) O-Ring, 40 x 3 mm (1.57 x 0.12 in.) Seal ring - Bounded seal - Oil outlet 3/8 USS O-ring, Ø 0.47 x 0.06 in. (Ø 12 x 1.5 mm) O-ring, Ø 2.72 x 0.06 in. (Ø 69 x 1.5 mm) O-ring, Ø 0.51 x 0.06 in. (Ø 13 x 1.5 mm) O-ring, Ø 0.95 x 0.12 in. (Ø 24.2 x 3 mm) O-ring, Ø 1.30 x 0.08 in. (Ø 33 x 2 mm) O-Ring, 21 x 2 mm (0.83 x 0.08 in.) Seal ring, 7 / 10 x 1 mm (0.28 / 0.39 x 0.04 in.) Seal ring, Ø 0.34 X 0.51 x 0.04 in. (Ø 8.7 X 13 x 1 mm) Seal ring, 28 / 36 x 5.7 mm (1.10 / 1.42 x 0.22 in.) Seal, 28 / 38 x 7 / 10 mm (1.10 / 1.5 x 0.28 / 0.39 in.) Back-up washer, 28.7 x 38 x 2 mm (1.13 x in.) Circlip Protective cap, M24 x 1.5 mm O-ring, Ø 0.33 x 0.09 in. (Ø 8.3 x 2.4 mm) O-ring, Ø 0.64 x 0.09 in. (Ø 16.3 x 2.4 mm) Seal, Ø 0.31 x 0.55 x 0.14 x 0.20 in. (Ø 8 x 14 x 3.5 x 5 mm) Back-up ring Seal ring, 3.17 mm (1 8 in.) O-ring, Ø10 x 2 mm (Ø0.39 x 0.07 in.) Plastic plug, 6.35 mm (1 4 in.) U-seal ring 1/ Circlip 1 Wed Nov 25 04:38:33 MST

25 Spare parts list Kits Accumulator kit Wed Nov 25 04:38:34 MST

26 Item Part No. Name Qty L Accumulator kit Protective nut, M24 x 1.5 mm Seal ring, Ø 0.34 X 0.51 x 0.04 in. (Ø 8.7 X 13 x 1 mm) Charging screw Accumulator cover Diaphragm Accumulator body Filling device kit Adapter Manometer Tool for accumulator Suitcase Charging hose Charging device 1 Not Shown - Adapters 1 Wed Nov 25 04:38:34 MST

27

28 Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings.