LT 800. Spare parts list. Rammer. s/n: BGF Engine: Hatz 1B Construction Tools EOOD No d

Transcription

1 LT 800 Spare parts list Rammer s/n: BGF Engine: Hatz 1B Construction Tools EOOD No d

2 F1700C Spare parts list General information This spare parts list applies to the following: Part number Description Rammer LT mm (11 in.) Rammer LT mm (13 in.) Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions!

3 Contents Spare parts list Handle 4 Transmission 6 Spring unit 8 Foot 280 mm (11 in.) 10 Foot 330 mm (13 in.) 12 Extended foot 14 Engine installation 16 Labels 19 Kits One year service kit 22 Shock absorber repair kit 24 Transmission repair kit 26 Spring unit repair kit 28 Foot 280 mm (11 in.) repair kit 30 Foot 330 mm (13 in.) repair kit 32 Silent foot 280 mm (11 in.) kit 34 Extended foot kit 36

4 Spare parts list Handle Wed Oct 08 00:53:49 MDT

5 Item Part No. Name Qty L Throttle control, cpl Handle Control cable, cpl Roller Screw, M6 x 30 mm 8.8 A2K Lifting lug Screw, M8 x 50 mm 8.8 A2K Screw, M10 x 30 mm 8.8 A3K Screw, M8 x 20 mm 8.8 A2K Screw, M5 x 18 mm 8.8 A2K Nut, M5 A2K Bracket Screw, M8 x 25 mm 8.8 A2K Nut, M8 x 1.25 mm A2K Angle stop right side 1 A Angle stop left side 1 B Cylindric pin Screw, M8 x 30 mm 8.8 A2K Shock absorber Handle Nut, M6 ISO Comments for Page: Handle (L)OCAL REMARKS A Right B Left Wed Oct 08 00:53:49 MDT

6 Spare parts list Transmission Wed Oct 08 00:53:51 MDT

7 Item Part No. Name Qty L Gear wheel Needle bearing Connecting rod Ball bearing Circlip ring Needle bearing Snap ring Bearing Snap ring Sealing Shaft Crankcase O-ring Cover Screw, M10 x 25 mm 8.8 A3K Pin O-ring Washer, 10.5 x 22 x 2 mm, 0.41 x 0.87 x 0.08 in. 300 HV Screw, M10 x 35 mm 8.8 A3K Outer tube 1 Wed Oct 08 00:53:51 MDT

8 Spare parts list Spring unit Wed Oct 08 00:53:52 MDT

9 Item Part No. Name Qty L Plug Piston bolt Rod piston head Lid Spring Spring Stop Rod piston Stop Hose clamp Screw, M8 x 40 mm 8.8 A2K Bellows Screw, M8 x 20 mm 8.8 A2K Bellows support Sight plug Gasket Inner tube Handle Plug O-ring Lid Seal ring Nut, M8 x 1.25 mm A2K Fiber washer 1 Wed Oct 08 00:53:52 MDT

10 Spare parts list Foot 280 mm (11 in.) Wed Oct 08 00:53:52 MDT

11 Item Part No. Name Qty L Ground plate Foot Screw, M8 x 50 mm NYLOK BLUE PATCH (Known as TUF-LOK in Europe) 8 A 4 - Nut, M8 x 1.25 mm A2K Screw, M12 x 150 mm 10.9 GEOMET 2 B Screw, M12 x 100 mm 10.9 GEOMET 2 B Screw, M12 x 110 mm 10.9 GEOMET 2 B 8 - Nut, M12 x 1.75 mm A3K Washer, 8.4 x 22 x 3 mm, 0.33 x 0.87 x 0.12 in. HV300 8 Comments for Page: Foot 280 mm (11 in.) A NYLOK BLUE PATCH is a trademark of Nylok Corporation. TUF-LOK is a registered trademark of Nylok Corporation in Europe. B GEOMET is a registered trademark of Nof Metal Coatings North America Inc. Wed Oct 08 00:53:52 MDT

12 Spare parts list Foot 330 mm (13 in.) Wed Oct 08 00:53:53 MDT

13 Item Part No. Name Qty L Ground plate Foot Screw, M8 x 50 mm NYLOK BLUE PATCH (Known as TUF-LOK in Europe) 14 A 4 - Nut, M8 x 1.25 mm A2K Screw, M12 x 150 mm 10.9 GEOMET 2 B Screw, M12 x 100 mm 10.9 GEOMET 2 B Screw, M12 x 110 mm 10.9 GEOMET 2 B 8 - Nut, M12 x 1.75 mm A3K Washer, 8.4 x 22 x 3 mm, 0.33 x 0.87 x 0.12 in. HV Comments for Page: Foot 330 mm (13 in.) A NYLOK BLUE PATCH is a trademark of Nylok Corporation. TUF-LOK is a registered trademark of Nylok Corporation in Europe. B GEOMET is a registered trademark of Nof Metal Coatings North America Inc. Wed Oct 08 00:53:53 MDT

14 Spare parts list Extended foot Wed Oct 08 00:53:54 MDT

15 Item Part No. Name Qty L Extended foot Screw, M12 x 90 mm 10.9 GEOMET 2 A Screw, M12 x 70 mm 10.9 GEOMET 4 A 4 - Nut, M12 x 1.75 mm A3K Washer, 13 x 24 x 2 mm, 0.51 x 0.98 x 0.08 in. 300 HV 6 Comments for Page: Extended foot A GEOMET is a registered trademark of Nof Metal Coatings North America Inc. Wed Oct 08 00:53:54 MDT

16 Spare parts list Engine installation Wed Oct 08 00:53:56 MDT

17 Item Part No. Name Qty L Engine, cpl Hatz 1B20 1 A 2 - Washer, 8.4 x 26 x 4 mm, 0.33 x 1.02 x 0.16 in. 300 HV Screw, M8 x 25 mm 8.8 A2K Adapter Stud Lock nut M Screw, M8 x 40 mm 8.8 A2K Washer, 8.4 x 16 x 1.5 mm, 0.33 x 0.63 x 0.06 in. 300 HV Bracket Screw, M10 x 45 mm 8.8 A3K 4 E Screw, M10 x 45 mm F Support washer Washer, 10.5 x 22 x 2 mm, 0.41 x 0.87 x 0.08 in. 300 HV Bracket 1 B Bracket 1 C 16 - Screw, M8 x 20 mm 8.8 A2K Cover Fuel hose Spacer Screw, M8 x 100 mm 8.8 A2K Lock nut M10 DIN Washer, 8.4 x 25 x 2 mm, 0.33 x 0.98 x 0.12 in Filler cap Fuel tank Fibre washer, 17 x 23 x 1.5 mm, 0.67 x 0.91 x 0.06 in Nipple Lock nut, M8 x 1.25 mm A2K Screw, M8 x 20 mm 8.8 A2K Pipe clamp Fuel filter Fuel hose Fuel hose Hose clamp Hose calmp 1 D 35 - Screw, M8 x 20 mm 8.8 A2K Clutch, cpl Cover 2 Wed Oct 08 00:53:56 MDT

18 Item Part No. Name Qty L Clutch lining Centrifugal weight Retaining ring Spring Hub Stud 2 Comments for Page: Engine installation (L)OCAL REMARKS A Hatz 1B20 Rammer version B Right C Left D Supplied with engine E Tightening torque: 45 Nm F Tightening torque: 68 Nm. Valid from serial number BGF Wed Oct 08 00:53:56 MDT

19 This page intentionally left blank Wed Oct 08 00:53:56 MDT

20 Spare parts list Labels Wed Oct 08 00:53:57 MDT

21 Item Part No. Name Qty L 1 - Label 1 A Product label 2 B Decal 1 C Decal 1 D 5 - Data plate Decal, lift point 2 E Safety decal "Hot surface" 1 F Decal "THROTTLE CONTROL" 1 G 9 - Screw, 2 x 5 mm KDS Product label, "Atlas Copco" 1 H 11 - Screw, K22 x 6 mm KX-PT Safety label, compressed spring package 1 I Comments for Page: Labels (L)OCAL REMARKS A Sound power level B "LT 800" C Ear protection, read instruction manual and diesel D Keep upright E Lifting point F Hot surfaces G Throttle indication H "Atlas Copco" I Compressed spring package Wed Oct 08 00:53:57 MDT

22 Kits One year service kit Wed Oct 08 00:53:58 MDT

23 Item Part No. Name Qty L Service kit, once a year Filter element O-ring Rope Fuel filter Gasket 1 Wed Oct 08 00:53:58 MDT

24 Kits Shock absorber repair kit Wed Oct 08 00:53:58 MDT

25 Item Part No. Name Qty L Repair kit, shock absorber Nut, M8 x 1.25 mm A2K Screw, M8 x 20 mm 8.8 A2K Screw, M8 x 25 mm 8.8 A2K Shock absorber Cylindric pin 4 Wed Oct 08 00:53:58 MDT

26 Kits Transmission repair kit Wed Oct 08 00:53:59 MDT

27 Item Part No. Name Qty L Repair kit, transmission Needle bearing Ball bearing Circlip ring Needle bearing Snap ring Bearing Snap ring Sealing Nut, M12 x 1.25 mm A3K O-ring Screw, M10 x 25 mm 8.8 A3K O-ring Washer, 10.5 x 22 x 2 mm, 0.41 x 0.87 x 0.08 in. 300 HV Screw, M10 x 35 mm 8.8 A3K Washer, 8.4 x 26 x 3 mm, 0.33 x 1.02 x 0.12 in Screw, M8 x 25 mm 8.8 A2K 1 Wed Oct 08 00:53:59 MDT

28 Kits Spring unit repair kit Wed Oct 08 00:54:01 MDT

29 Item Part No. Name Qty L Repair kit, spring unit Spring Spring Stop Stop Screw, M8 x 20 mm 8.8 A2K Gasket O-ring Washer, 8.7 x 14 x 1 mm, 0.32 x 0.04 in. Type A Fibre washer, 27 x 32 x 2 mm, 1.06 x 1.26 x 0.08 in. 1 Wed Oct 08 00:54:01 MDT

30 Kits Foot 280 mm (11 in.) repair kit Wed Oct 08 00:54:02 MDT

31 Item Part No. Name Qty L Foot 280 mm (11 in.) repair kit Ground plate Foot Screw, M8 x 50 mm NYLOK BLUE PATCH (Known as TUF-LOK in Europe) 8 A 5 - Nut, M8 x 1.25 mm A2K Screw, M12 x 150 mm 10.9 GEOMET 2 B Screw, M12 x 100 mm 10.9 GEOMET 2 B Screw, M12 x 110 mm 10.9 GEOMET 2 B 9 - Nut, M12 x 1.75 mm A3K Washer, 8.4 x 22 x 3 mm, 0.33 x 0.87 x 0.12 in. HV300 8 Comments for Page: Foot 280 mm (11 in.) repair kit A NYLOK BLUE PATCH is a trademark of Nylok Corporation. TUF-LOK is a registered trademark of Nylok Corporation in Europe. B GEOMET is a registered trademark of Nof Metal Coatings North America Inc. Wed Oct 08 00:54:03 MDT

32 Kits Foot 330 mm (13 in.) repair kit Wed Oct 08 00:54:03 MDT

33 Item Part No. Name Qty L Foot 330 mm (13 in.) repair kit Ground plate Foot Screw, M8 x 50 mm NYLOK BLUE PATCH (Known as TUF-LOK in Europe) 14 A 5 - Nut, M8 x 1.25 mm A2K Screw, M12 x 150 mm 10.9 GEOMET 2 B Screw, M12 x 100 mm 10.9 GEOMET 2 B Screw, M12 x 110 mm 10.9 GEOMET 2 B 9 - Nut, M12 x 1.75 mm A3K Washer, 8.4 x 22 x 3 mm, 0.33 x 0.87 x 0.12 in. HV Comments for Page: Foot 330 mm (13 in.) repair kit A NYLOK BLUE PATCH is a trademark of Nylok Corporation. TUF-LOK is a registered trademark of NylokCorporation in Europe. B GEOMET is a registered trademark of Nof Metal Coatings North America Inc. Wed Oct 08 00:54:03 MDT

34 Kits Silent foot 280 mm (11 in.) kit Wed Oct 08 00:54:04 MDT

35 Item Part No. Name Qty L Silent foot 280 mm (11 in.) kit Foot Nut, M12 x 1.75 mm A3K 6 Wed Oct 08 00:54:04 MDT

36 Kits Extended foot kit Wed Oct 08 00:54:04 MDT

37 Item Part No. Name Qty L Extended foot kit Foot Screw, M12 x 90 mm 10.9 GEOMET 2 A.4 - Screw, M12 x 70 mm 10.9 GEOMET 4 A.5 - Nut, M Washer, 13 x 24 x 2 mm, 0.51 x 0.98 x 0.08 in. 300 HV Label 1 B Comments for Page: Extended foot kit A GEOMET is a registered trademark of Nof Metal Coatings North America Inc. B Direction Wed Oct 08 00:54:04 MDT

38 F1700C Spare parts list Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings.