DC 600. Spare parts list. Transverse Drum Cutters. DC 600 s/n DEQ Construction Tools GmbH No

Transcription

1 DC 600 Spare parts list Transverse Drum Cutters DC 600 s/n DEQ Construction Tools GmbH No

2 General information This spare parts list applies to the following: Part number Description Transverse drum cutter DC 600 Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions! Instructions for ordering It is essential to indicate the serial number of the hydraulic attachment when ordering spare parts! Determine the quantity of individual parts which are required and need to be ordered. The order must indicate the following details: full identification code of the hydraulic attachment required quantity part number description

3 Contents Service, repair and wear part kits Label kit 1 Mechanical Transverse Drum Cutter, part 1 3 Transverse Drum Cutter, part 2 6 Transverse Drum Cutter, part 3 9 Tightening torques 11 Dimensions 13 Options / accessories Hydraulic hoses 14 Optional equipment 17 Working tools 19

4 Service, repair and wear part kits Label kit Tue May 30 08:50:05 UTC

5 Item Part No. Name Qty L Label kit 1 Tue May 30 08:50:05 UTC

6 Mechanical Transverse Drum Cutter, part 1 Tue May 30 08:50:05 UTC

7 Item Part No. Name Qty L Gear housing Plug Seal Output shaft Lock ring Output cogwheel Flange Sealing cover Rotatable upper part Tapered roller bearing Tapered roller bearing Seal Shaft nut Allen screw Allen screw Allen screw Allen screw Usit-ring O-ring O-ring Bolt Spur gear Cover Allen screw Spring washer Cylindrical roller bearing O-ring O-ring Drive shaft Spur gear drive Cover Flange (motor) Allen screw Tapered roller bearing Tapered roller bearing O-ring O-ring 1 Tue May 30 08:50:05 UTC

8 Item Part No. Name Qty L Seal Cover Clamping sleeve Cover (motor) Hexagon head screw Centering pin Plate (centering pin) Allen screw Allen screw Allen screw Hexagonal nut Hexagon head screw Hexagon head screw Overpressure plate (motor) Distribution housing (motor) Cam ring Cylinder block Allen screw O-ring O-ring Hexagon head screw Lock nut 2 Tue May 30 08:50:05 UTC

9 This page intentionally left blank Tue May 30 08:50:05 UTC

10 Mechanical Transverse Drum Cutter, part 2 Tue May 30 08:50:06 UTC

11 Item Part No. Name Qty L Cutter drum (left) Cutter drum (right/motor) Round attack pick 12-C DC 44 A 16 - Knock on retainer 44 A Pick box Hydraulic motor 1 Comments for Page: Transverse Drum Cutter, part 2 (L)OCAL REMARKS A see chapter Working tools Tue May 30 08:50:06 UTC

12 Mechanical Transverse Drum Cutter, part 3 Tue May 30 08:50:06 UTC

13 Item Part No. Name Qty L Hydraulic hose, I.D. 12 (0.47"), JIC 7/8" / flange SAE 1/2" PSI - 45 with O- ring, length 2000 mm (78.74 in.) 1 A Hydraulic hose, I.D. 12 (0.47"), JIC 3/4" / JIC 3/4", length 2000 mm (78.74 in.) 1 A Hydraulic hose, I.D. 12 (0.47"), JIC 7/8" / flange SAE 1/2" PSI - with O-ring, length 2000 mm (78.74 in.) 1 A Allen screw Fitting Plug Plug Flange half O-ring Check valve Fitting Fitting 1 Comments for Page: Transverse Drum Cutter, part 3 (L)OCAL REMARKS A see chapter Options / accessories Tue May 30 08:50:06 UTC

14 Mechanical Tightening torques Tue May 30 08:50:06 UTC

15 Item Part No. Name Qty L 75 - Allen screw Nm (221 ft lbf) - A 77 - Hexagon head screw Nm (152 ft lbf) - B Comments for Page: Tightening torques (L)OCAL REMARKS A Allen key size 14 B Open-ended wrench size 24 Tue May 30 08:50:06 UTC

16 Mechanical Dimensions Tue May 30 08:50:07 UTC

17 This page intentionally left blank Tue May 30 08:50:07 UTC

18 Options / accessories Hydraulic hoses Tue May 30 08:50:07 UTC

19 Item Part No. Name Qty L Not Shown - Pressure line Hydraulic hose, I.D. 12 (0.47"), JIC 7/8" / flange SAE 1/2" PSI - 45 with O- ring, length 2000 mm (78.74 in.) 1 Not Shown - Tank line Hydraulic hose, I.D. 12 (0.47"), JIC 7/8" / flange SAE 1/2" PSI - with O-ring, length 2000 mm (78.74 in.) 1 Not Shown - Leakage oil line Hydraulic hose, I.D. 12 (0.47"), JIC 3/4" / JIC 3/4", length 2000 mm (78.74 in.) 1 Tue May 30 08:50:07 UTC

20 Options / accessories Optional equipment Tue May 30 08:50:07 UTC

21 Item Part No. Name Qty L Hydraulic filter for leakage oil Filter catridge for leakage oil Adapter plate matching the carrier. Consult the Atlas Copco Customer Center/Dealer in your area Base plate with threaded inserts Bolt kit Base plate with through borings Bolt kit Allen key (19 mm) Knock out tool Knock out tool for stuck picks Dismantling tool for knock on retainer Mounting tool for knock on retainer 1 Tue May 30 08:50:07 UTC

22 Options / accessories Working tools Tue May 30 08:50:07 UTC

23 Item Part No. Name Qty L Box of picks, Pick 12-C DC 600, contains 40 picks and 40 knock on retainers 1 A Box of picks, Pick 15-C DC 600, contains 40 picks and 40 knock on retainers 1 B Box of picks, Pick 19-A DC 600, contains 40 picks 1 C Clip set, DC 600, contains 40 knock on retainers 1 Comments for Page: Working tools (L)OCAL REMARKS A ØT = 12 mm (0.47 in.) B ØT = 15 mm (0.59 in.) C ØT = 19 mm (0.75 in.) Tue May 30 08:50:08 UTC

24 Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings.