SB Spare parts list. Hydraulic breaker Construction Tools PC AB No

Transcription

1 SB 1102 Spare parts list Hydraulic breaker 2016 Construction Tools PC AB No

2 General information This spare parts list applies to the following: Part number Description SB 1102 Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions!

3 Contents Service, repair and wear part kits Label kit 1 Seal kit 3 Lower hammer part kit 5 Accumulator repair kit 7 Mechanical Spare parts list 9 Tightening torques 12 Dimensions 15 Options / accessories Service tool 16 Working tools 19 Hydraulic hoses 21 Optional parts - Restrictor, complete 23 Optional parts - Bushing oversize, complete 25 Optional equipment 27

4 Service, repair and wear part kits Label kit Thu Nov 24 06:28:17 UTC

5 Item Part No. Name Qty L Label kit Sound power label Product label "SB 1102" Product label "Atlas Copco" AEM sign Product label "SB 1102" Label "Atlas Copco" Safety label Safety label 1 Thu Nov 24 06:28:17 UTC

6 Service, repair and wear part kits Seal kit Thu Nov 24 06:28:17 UTC

7 Item Part No. Name Qty L Seal kit Plug O-ring Stircomatic Support ring O-ring 13.3 x 2.4 mm (70 shore), 0.52 x 0.09 in O-ring 7.3 x 2.4 mm (70 shore), 0.28 x 0.09 in Seal, SRC 8 x 14 x 2.4 mm Wiper Piston rod seal Piston rod seal Stircomatic Cover seal O-ring O-ring O-ring, 15.6 x 1.78, 0.62 x 0.07 in. (90 shore) O-ring, x 2.62 mm, 0.92 x 0.10 in Valve rubber Scraper ring O-ring 1 Thu Nov 24 06:28:17 UTC

8 Service, repair and wear part kits Lower hammer part kit Thu Nov 24 06:28:18 UTC

9 Item Part No. Name Qty L Lower hammer part kit Lower bushing, complete Scraper ring Bushing lower O-ring O-ring Bushing upper Impact ring Lock pin sb Retainer bar Lock buffer Chisel paste cartridge 1 A Spring pin Locking pin 1 Comments for Page: Lower hammer part kit (L)OCAL REMARKS A 400 g (0.88 lb) Thu Nov 24 06:28:18 UTC

10 Service, repair and wear part kits Accumulator repair kit Thu Nov 24 06:28:18 UTC

11 Item Part No. Name Qty L Accumulator repair kit Parallel pin D4 x 25 mm, D4 x 0.98 in O-ring 7.3 x 2.4 mm (70 shore), 0.28 x 0.09 in Charge valve Seal, SRC 8 x 14 x 2.4 mm O-ring 13.3 x 2.4 mm (70 shore), 0.52 x 0.09 in Diaphragm support Coil spring sb Diaphragm Hexagon socket screw M16 x 50 mm Screw with extra high fatigue strength Plug VSTI R 18-ED 1 Thu Nov 24 06:28:18 UTC

12 Mechanical Spare parts list Thu Nov 24 06:28:19 UTC

13 Item Part No. Name Qty L Hexagon socket screw M16 x 50 mm Screw with extra high fatigue strength Diaphragm cover Diaphragm Diaphragm support Coil spring sb Hammerbody SB Retainer bar Lock buffer Spring pin Locking pin Lock pin sb Impact ring Bushing upper Lower bushing, complete O-ring Bushing lower Scraper ring O-ring Wear plate, complete O-ring Bearing cover Hexagon socket screw Lock washer 8 A Cover seal Piston Piston rod seal O-ring Back head Hexagon head bolt M24 x 90 mm Non return valve, G1/2 in Grease nipple, ISO 7-R 1/ Plug, VSTI R 1/4-ED Pressure relief valve, complete O-ring, x 2.62 mm, 0.92 x 0.10 in Valve O-ring, 15.6 x 1.78, 0.62 x 0.07 in. (90 shore) Check valve, complete 1 Thu Nov 24 06:28:19 UTC

14 Item Part No. Name Qty L Valve rubber Valve Plug VSTI R 18-ED Charge valve O-ring 13.3 x 2.4 mm (70 shore), 0.52 x 0.09 in Seal, SRC 8 x 14 x 2.4 mm O-ring 7.3 x 2.4 mm (70 shore), 0.28 x 0.09 in Parallel pin D4 x 25 mm, D4 x 0.98 in Cap Nipple (M36 x 2 Cone 24 ) Plug Valve Stircomatic Valve cover Plug, Ø10 mm, Ø0.39 in Plug, VSTI R 38 - ED Wiper Piston rod seal Plug, Ø10 mm, Ø0.39 in Base plate Bolt kit Screw M30 x 110 mm TUFLOC Hexagon nut Restrictor, complete O-ring, 15.6 x 1.78, 0.62 x 0.07 in. (90 shore) O-ring, x 2.62 mm, 0.92 x 0.10 in Restrictor plug Restrictor sleeve, ø8.4 mm, 0.33 in Spring pin, option, 16 x 180 mm, 0.63 x 7.09 in. 1 B Liner 1 Comments for Page: Spare parts list A Optional, for heavy duty. B For hot enviroment only. No need to use Pos.8 Thu Nov 24 06:28:20 UTC

15 This page intentionally left blank Thu Nov 24 06:28:20 UTC

16 Mechanical Tightening torques Thu Nov 24 06:28:20 UTC

17 Item Part No. Name Qty L 1 - Screw Nm Screw Nm, use Molykote Bolt Nm Non returan valave, G1/2 in Nm Grease nipple - 30 Nm Plug - 30 Nm, use LOCTITE Valve - 80 Nm Check valve - 80 Nm Plug - 20 Nm Charge valve - 30 Nm, use LOCTITE Valve cover, 2000(+1000/-500) Nm, use Molykote Plug - 80 Nm, use LOCTITE Nut Nm, use Molykote 9 Thu Nov 24 06:28:20 UTC

18 Mechanical Dimensions Thu Nov 24 06:28:20 UTC

19 This page intentionally left blank Thu Nov 24 06:28:21 UTC

20 Options / accessories Service tool Thu Nov 24 06:28:21 UTC

21 Item Part No. Name Qty L Service tool for liner 1 Thu Nov 24 06:28:21 UTC

22 Options / accessories Working tools Thu Nov 24 06:28:21 UTC

23 Item Part No. Name Qty L Not Shown - Working tools Classic Line Moil point 1 A Chisel (cross) 1 B Moil point 1 C Chisel (cross) 1 D Blunt tool 1 E Not Shown - Working Tools Pro Line Moil point 1 F Chisel (cross) 1 G Blunt tool 1 H Comments for Page: Working tools A Lt = 1090 mm B Lt = 1090 mm C Lt = 1150 mm D Lt = 1150 mm E Lt = 1150 mm F Lt = 1150 mm G Lt = 1150 mm H Lt = 1150 mm Thu Nov 24 06:28:21 UTC

24 Options / accessories Hydraulic hoses Thu Nov 24 06:28:22 UTC

25 Item Part No. Name Qty L Hydraulic hose, I.D. 20 (0.79 in.), both ends M36 x 2 mm conical seal 24, length 2,300 mm (90.5 in.) Hydraulic hose, I.D. 20 (0.79 in.), both ends M36 x 2 mm conical seal 24, length 2,800 mm (110.2 in.) 2 2 Thu Nov 24 06:28:22 UTC

26 Options / accessories Optional parts - Restrictor, complete Thu Nov 24 06:28:22 UTC

27 Item Part No. Name Qty L Restrictor, complete O-ring, 15.6 x 1.78, 0.62 x 0.07 in. (90 shore) Retrictor sleeve,ø7.3 mm,ø0.29 in O-ring, x 2.62 mm, 0.92 x 0.10 in Restrictor plug Restrictor, complete O-ring, 15.6 x 1.78, 0.62 x 0.07 in. (90 shore) Restrictor sleeve, ø8.9 mm, ø0.35 in O-ring, x 2.62 mm, 0.92 x 0.10 in Restrictor plug 1 Comments for Page: Optional parts - Restrictor, complete For oil flow diagrams, please see Safety and operating instructions. Thu Nov 24 06:28:22 UTC

28 Options / accessories Optional parts - Bushing oversize, complete Thu Nov 24 06:28:23 UTC

29 Item Part No. Name Qty L Upper bushing(+1.5 mm), ø161 mm, ø6.34 in Lower bushing oversize, complete O-ring Lower bushing, ø161.5 mm, ø6.34 in Scraper ring O-ring Upper bushing (+ 3 mm), ø162.5 mm, ø6.40 in Lower bushing oversize, complete O-ring Lower bushing, Scraper ring O-ring 1 Thu Nov 24 06:28:23 UTC

30 Options / accessories Optional equipment Thu Nov 24 06:28:23 UTC

31 Item Part No. Name Qty L Grease gun for 400 g cartridge 1 A Chisel paste cartridge for grease gun, 12 x 400 g (0.88 lbs) Automatic lubrication system Universall adapter kit 1 B Chisel paste cartridge, 12 x 500 g (1.1 lbs) Filling device 1 C Filling adapter 1 D Filling device 1 E Chisel paste container (15 kg) 1 F Chisel paste container (45 kg) 1 G Filling device for accumulator Nipple, for charging the accumulator Filling hose for charging the accumulator Bushing wear controller Water nozzle 4 Comments for Page: Optional equipment (L)OCAL REMARKS A For manual greasing with cartridge, 400 g (0.88 lb) B For ContiLube II C For the 500 g (1.10 lb) Chisel paste cartridges, to use in combination with Chisel paste container 15 kg (33 lb) D For the 500 g (1.10 lb) Chisel paste cartridges, suitable with the filling device for 15 kg (33 lb) and 45 kg (99 lb) E For the 500 g (1.10 lb) Chisel paste cartridges, to use in combination with Chisel paste container 45 kg (99 lb) F 15 kg (33 lb) G 45 kg (99 lb) Thu Nov 24 06:28:24 UTC

32 Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings.