LPD. Spare parts list. Post drivers heavy-duty HD-T, HD-RV Atlas Copco Construction Tools AB No f

Transcription

1 LPD HD-T, HD-RV Post drivers heavy-duty

2

3 Contents Contents General information LPD-HD-T LPD-HD-RV Remote valve Tightening torque Working tools Driver kits Working tools Accessories Hoses and couplings Kits Seal kit Label kit

4

5 General information This spare parts list applies to the following: Hydraulic post driver LPD-HD-T Hydraulic post driver LPD-HD-RV Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions! 5

6 LPD-HD-T

7 No. Quantity (-7) (9-) (6-8) Accumulator, complete Accumulator body Diaphragm Accumulator cover Charging screw Protective nut Valve housing, complete Valve housing Fitting 0 Fitting 0 Ball Check valve screw Cylinder, complete Cylinder Fitting 0 Fitting 0 Piston Spool Guide socket Spool socket Locking ring Seal Wiper Roll pin Back-up washer 8.7/3 x mm 0.3/0.5 x in. M x.5 mm Use LOCTITE 5 Use LOCTITE 5 9/ x mm 0.35/0.55 x in. Use LOCTITE 5 Use LOCTITE 5 M0 x 35 mm, Use LOCTITE 5 Use LOCTITE 5 Use LOCTITE 5 x.5 mm 0.9 x 0.06 in. 8 x mm 0.7 x 0.08 in. 3 x mm.6 x 0.08 in. 5. x.78 mm 0.99 x 0.07 in. 38/5 x 6 mm.50/.77 x 0. in. 38/8 x 7/0 mm.50/.89 x 0.8/0.39 in. ½ in. BSP (T) for 0 l/min, ½ in. BSP (T) for 35 l/min, ½ in. BSP (T) for 30 l/min, ½ in. BSP (T) for 0 l/min, ½ in. BSP 6 x 30 mm 0. x.8 in. 30 x mm.8 x 0.08 in. 6 x mm 0. x 0.08 in. 8 x mm 0.3 x 0.08 in. 8 x.5 mm 3.3 x 0.06 in. 8 x.5 mm 0.7 x 0.06 in

8 No. Quantity (57-67) Top plate Back-up washer Locking ring Nose part Bottom plate Bushing Handle Washer Lifting bracket Trigger valve, complete Circlip Shim Trigger spool Trigger rod Packing gland Spring Seal Back-up ring Circlip Protective cap Trigger lever Trigger housing Trigger Cylinder pin 3 x.5 mm 0.5 x 0.06 in. 38.7/8 x.5 mm.5/.89 x 0.98 in. Welded assembly Hex 3 x 60 mm ( x in.), Use LOCTITE 68 M x 75 mm, Use LOCTITE 5 M0 x 5 mm, Use LOCTITE 5 0 mm 0.39 in. M0 x 0 mm, Use LOCTITE 5 PS 8 x x 0.5 mm 0.3 x 0.55 x 0.0 in. 8.3 x. mm 0.33 x 0.09 in. 6.3 x. mm 0.6 x 0.09 in. 8/ x 3.5/5 mm 0.7/0.55 x 0./0.0 in. ½ in. BSP M6 x 5 mm 9.53 x 5. mm 3 8 x in Ball Trigger plate Data plate 9.53 mm 3/8 in. M5 x 8 mm M0 x 30 mm, Use LOCTITE 5 M0 x 35 mm, Use LOCTITE LOCTITE is a registered trademark of Henkel Corporation. 5, 68 are trademarks of Henkel Corporation. 8

9 9

10 LPD-HD-RV

11 No. Quantity (-7) (9-) (6-8) Accumulator, complete Accumulator body Diaphragm Accumulator cover Charging screw Protective nut Valve housing, complete Valve housing Fitting 0 Fitting 0 Ball Check valve screw Cylinder, complete Cylinder Fitting 0 Fitting 0 Piston Spool Guide socket Spool socket Locking ring Seal Wiper Trigger valve Back-up washer 8.7/3 x mm 0.3/0.5 x in. M x.5 mm Use LOCTITE 5 Use LOCTITE 5 9/ x mm 0.35/0.55 x in. Use LOCTITE 5 Use LOCTITE 5 M0 x 35 mm, Use LOCTITE 5 Use LOCTITE 5 Use LOCTITE 5 x.5 mm 0.9 x 0.06 in. 8 x mm 0.7 x 0.08 in. 3 x mm.6 x 0.08 in. 5. x.78 mm 0.99 x 0.07 in. 38/5 x 6 mm.50/.77 x 0. in. 38/8 x 7/0 mm.50/.89 x 0.8/0.39 in. ½ in. BSP (T) for 0 l/min, ½ in. BSP (T) for 35 l/min, ½ in. BSP (T) for 30 l/min, ½ in. BSP (T) for 0 l/min, ½ in. BSP Constant activated 30 x mm.8 x 0.06 in. 6 x mm 0. x 0.08 in. 8 x mm 0.3 x 0.08 in. 8 x.5 mm 3.3 x 0.06 in. 8 x.5 mm 0.7 x 0.06 in. 3 x.5 mm 0.5 x 0.06 in

12 No. Quantity (58-65) Top plate Back-up washer Locking ring Nose part Bottom plate Bushing Handle Washer Lifting bracke On/off valve, complete On/off valve Quick-release coupling Quick-release coupling Protective cap Protective cap Tail hose Data plate 38.7/8 x.5 mm.5/.89 x 0.98 in. Welded assembly Hex 3 x 60 mm ( x in.), Use LOCTITE 68 M x 75 mm, Use LOCTITE 5 M0 x 5 mm, Use LOCTITE 5 0 mm 0.39 in. M0 x 0 mm, Use LOCTITE x. mm 0.6 x 0.09 in. ⅜ in. BSP M ½ in. BSP M ⅜ in. BSP ½ in. BSP Female Male Male, for QRC Female, for QRC.8 mm 0.07 in. M0 x 35 mm, Use LOCTITE LOCTITE is a registered trademark of Henkel Corporation. 5, 68 are trademarks of Henkel Corporation.

13 3

14 Remote valve 3

15 No. Quantity 3 Remote valve Button

16 Tightening torque LPD-HD-T No. Tightening torque (Nm) 0 70 LOCTITE Guide socket 00 LOCTITE Spool socket 00 LOCTITE (T) (T) (T) (P) LOCTITE LOCTITE LOCTITE LPD-HD-RV No. Tightening torque (Nm) 0 70 LOCTITE Guide socket 00 LOCTITE Spool socket 00 LOCTITE (T) (T) (T) (P) LOCTITE LOCTITE LOCTITE LOCTITE is a registered trademark of Henkel Corporation. 5 are trademarks of Henkel Corporation. 6

17 Working tools Driver kits A B Driver kit A Includes anvil rod (), solid adaptor (0-3), steel ropes, retainers and fasteners. Quantity Solid adaptor, round Solid adaptor, round Solid adaptor, round Solid adaptor, round For 6.0 in. tubes and 0 mm poles For Ø35-5 mm tubes For Ø05-5 mm tubes For Ø50 mm poles Driver kit B Includes anvil rod (), anvil head (), guide adaptor (3-9), spacers, and fasteners. Quantity Guide adaptor, rectangular Guide adaptor, rectangular Guide adaptor, round Guide adaptor, round Guide adaptor, round Guide adaptor, round Guide adaptor, round For IPE/Sigma/C 00 mm beams For IPE/C 0 mm beams For.5 in. tubes and mm poles For 3.0 in. tubes and mm poles For 3.5 in. tubes and mm poles For.0 in. tubes and 05-0 mm poles For 5.0 in. tubes and 5-35 mm poles

18 Working tools No. Quantity Anvil rod Anvil head Guide adaptor, rectangular Guide adaptor, rectangular Guide adaptor, round Guide adaptor, round Guide adaptor, round Guide adaptor, round Guide adaptor, round Solid adaptor, round Solid adaptor, round Solid adaptor, round Solid adaptor, round Anvil rod Ø3 x 60 mm round shank Ø8 x 8 mm flat end For IPE/Sigma/C 00 mm beams For IPE/ C 0 mm beams For.5 in. tubes and mm poles For 3.0 in. tubes and mm poles For 3.5 in. tubes and mm poles For.0 in. tubes and 05-0 mm poles For 5.0 in. tubes and 5-35 mm poles For 6.0 in. tubes and 0 mm poles For Ø35-5 mm tubes For Ø05-5 mm tubes For Ø50 mm poles Ø3 x 60 mm HEX shank

19 Accessories Hoses and couplings Quantity Connection hose, complete Hose Ø in. L = 6 in. Ø.5 mm L = 0. m Ø in. L = 6 in. Ø.5 mm L = 0. m Bonded seal in. BSP Quick-release coupling Female in. BSP Quick-release coupling Male in. BSP Protective cap Protective cap Twin hose, complete Female Male Ø in. L = 76 in. Ø.5 mm L = 7 m Bonded seal in. BSP Quick-release coupling Female in. BSP Quick-release coupling Male in. BSP Protective cap Protective cap Twin hose Connection hose, complete Hose Female Male Ø in. L = 76 in. Ø.5 mm L = 7 m Ø in. L = 6 in. Ø.5 mm L =.6 m Ø in. L = 6 in. Ø.5 mm L =.6 m Bonded seal in. BSP Quick-release coupling Female in. BSP Quick-release coupling Male in. BSP Protective cap Protective cap Label "P" Female Male Pressure side

20 Kits Seal kit Quantity Seal kit Protective nut Locking ring Seal Wiper Circlip Shim Seal Back-up ring Circlip Back-up washer Locking ring 8.7/3 x mm 0.3/0.5 x in. M x.5 mm x.5 mm 0.9 x 0.06 in. 8 x mm 0.7 x 0.08 in. 3 x mm.6 x 0.08 in. 5. x.78 mm 0.99 x 0.07 in. 38/5 x 6 mm.50/.77 x 0. in. 38/8 x 7/0 mm.50/.89 x 0.8/0.39 in. ½ in. BSP PS 8 x x 0.5 mm 0.3 x 0.55 x 0.0 in. 8.3 x. mm 0.33 x 0.09 in. 6.3 x. mm 0.6 x 0.09 in. 8/ x 3.5/5 mm 0.7/0.55 x 0./0.0 in. 6 x mm 0. x 0.08 in. 8 x mm 0.3 x 0.08 in. 9/ x mm 0.35/0.55 x in. 8 x.5 mm 3.3 x 0.06 in. 8 x.5 mm 0.7 x 0.06 in. 3 x.5 mm 0.5 x 0.06 in. 38.7/8 x.5 mm.5/.89 x 0.0 in

21 Label kit Quantity Label kit Safety label Label Product label Product label Noise level label Product label N "Atlas Copco" "LPD-HD-T" "LPD-HD-RV"

22

23

24 Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings.