PLK/PLKD SERIES PLK/PLKD PIN LOCATING CLAMPS
|
|
- Myrtle Fowler
- 6 years ago
- Views:
Transcription
1 PLK/PLKD SERIES PLK/PLKD PIN LOCATING CLAMPS Ideal for part clamping in weld areas Disappearing Pin Weld Field Immune Switch PLK03
2 PLK/PLKD PIN LOCATING CLAMPS PATENT PENDING Major Benefits Completely enclosed finger/pin Available in pin diameters from 12.5 to 24.5 mm diameter 5 or 10 mm clamping stroke NAAMS mounting Short pin length for blind applications Position sensing provides open or closed sensing with industry standard AC or DC weld field immune switch mounted in a protected housing Self-locking internal threads throughout eliminate need for thread locking adhesives or additional locking components SERIES PLK SERIES PLKD with disappearing pin PLKD s locating pin retracts fully into part support, allowing greater ease of panel removal PLK and PLKD s weld field immune switch option provides consistent position sensing Disappearing pin provides sideways loading/unloading of panels, eliminates potential damage to parts. See page 16. SERIES PLK enclosed finger provides minimum opening for metal particles and weld slag to enter SERIES PLKD fingers may extend or retract independent of main pin enclosed finger provides minimum opening for metal particles and weld slag to enter NAAMS mounting hole pattern allows convenient mounting with shims and L blocks locking mechanism holds panels in place if pressure is lost internal pistons to independently actuate finger long life seals can withstand dirt and H2O present in shop air cylinder mounted switches provide a low cost solution for position sensing NAAMS mounting hole pattern allows convenient mounting with shims and L blocks long life seals can withstand dirt and H2O present in shop air locking mechanism holds panels in place if pressure is lost cylinder mounted switches provide a low cost solution for position sensing 2 Copyright 2016, by PHD, Inc. All Rights Reserved. Printed in the U.S.A. PLK (800)
3 ORDERING DATA: SERIES PLK & PLKD CLAMPS INDEX PAGES Engineering Data & Dimensions Options , Lock Adjustment Procedure... 9 Exploded Views & Parts Lists Clamp Actuation Steps...16 POSITION SENSOR OPTION CODE TO ORDER SPECIFY: Model, Unit Size and Stroke, Design No., Pin Size, Material Thickness, and Additional Options if desired. UNIT SIZE & CLAMP STROKE mm Bore 5 mm Clamp Stroke mm Bore 10 mm Clamp Stroke DESIGN NO. 1 - Imperial 5 - Metric MATERIAL THICKNESS LOCK ADJUSTMENT (See Note 1) MT07 - (0.7 mm).027 in MT10 - (1.0 mm).039 in MT40 - (4.0 mm).157 in HOUSING OPTION P - Positional Sensing SENSING OPTION S - Standard R - Reversed SWITCH HOUSING POSITION 1 - Position 1 PORT POSITION BLANK - (PP1) Standard Position 1 PP2 - Position 2 PP3 - Position 3 PP4 - Position 4 Ports in Position 1 required for PS/PRxxx. CONNECTOR POSITION 1 - Parallel to fingers 9 - Perpendicular to fingers (Position 9 not available with switch option A) SWITCH OPTION N- No Switch A- 5-pin AC/DC Switch (Turck) D- 4-pin PNP DC Switch (P + F) E- 4-pin PNP DC Switch (Turck) F- 4-pin PNP DC Switch (Efector) H- 4-pin NPN DC Switch (P + F) J- 4-pin NPN DC Switch (Turck) SWITCH OPTIONS BLANK - No Sensor Px1xx - Position Sensor (See Position Sensor Option Code) CYLINDER SWITCH OPTION BLANK - No Magnet (see Note 2) SW00 - Magnet for Switches Installed SW41-1 NPN Switch Installed SW42-2 NPN Switches Installed SW51-1 PNP Switch Installed SW52-2 PNP Switches Installed PLK B - MT LAA - PS1D9 - R01- SW00 MODEL PLK - Pin Clamp PLKD - Disappearing Pin Clamp PIN SIZE/STYLE 1250B mm dia. Pin with -.05 mm Tolerance 1550B mm dia. Pin with -.05 mm Tolerance 1850B mm dia. Pin with -.05 mm Tolerance 2450B mm dia. Pin with -.05 mm Tolerance FINGER DIRECTION BLANK - Standard Single Position (FD4) FD1 -Single Position 1 FD2 - Single Position 2 FD3 - Single Position 3 PORT FITTINGS (BOTH PORTS) BLANK - No Fittings LAA - 90 Swivel Elbow, Metal LBB - 90 Swivel Elbow, Plastic MISCELLANEOUS OPTIONS BLANK - None R01 - Sensor Flag R02 - Double Rod NOTES: 1) a. Lock may be preset at factory for material thickness in.004 in [0.1 mm] increments. b. Lock range is from 0 to.156 in [0 to 4.0 mm]. c. If MT section is left blank, clamp will be set for 2 mm material thickness (MT26). 2) Magnet will be installed if cylinder switches are ordered. 3) Metric units have metric ports, imperial units have imperial ports. CAD & Sizing Assistance Use PHD's free online Product Sizing and CAD Configurator at (800) PLK03
4 ENGINEERING DATA: SERIES PLK CLAMPS SPECIFICATIONS SEALS OPERATING TEMPERATURE LUBRICATION SERIES PLK Polyurethane -20 to +180 F [-28 to +82 C] Factory lubricated for life MODEL UNIT WEIGHT CLAMP FORCE 87 psi [6 bar] CLAMP FORCE FACTOR Cf CLOSE OR OPEN TIME 87 psi [6 bar] DISPLACEMENT CLOSE OPEN lb kg lb N imperial metric sec in 3 cm 3 in 3 cm 3 PLK5xx-x-1250B PLK5xx-x-1550B PLK5xx-x-1850B PLK5xx-x-2450B DIMENSIONS: SERIES PLK CLAMPS.295 [7.5] [110.0] [90.0] 4X.433 [11.0].939 [23.9] A [28.9] [30.0] [50.0].295 [7.5] 4X [30.0] 2.48 [63.0].3150 H7 [8.0] PLK505 EXTENDED *.196 [5.0] C PLK510 EXTENDED.393 [10.0] E.742 [18.9].787 [20.0] B D [110.0].512 [13.0].470 [11.9] [29.1] [32.6] [69.5] [57.5].476 [12.1] 2X 1/8 NPT PORT [1/8 BSPP] [38.0] [33.0] [63.0] NOTE: CLAMP SHOWN RETRACTED *8 for PLKxx-x-1250B DIMENSION A MAX A MIN B C D E PLK5xx-x-1250B in mm MODEL NUMBER PLK5xx-x-1550B PLK5xx-x-1850B in mm in mm PLK5xx-x-2450B in mm All dimensions are reference only unless specifically toleranced. PLK (800)
5 ENGINEERING DATA: SERIES PLKD CLAMPS SPECIFICATIONS SEALS OPERATING TEMPERATURE LUBRICATION SERIES PLKD Polyurethane -20 to +180 F [-28 to +82 C] Factory lubricated for life MODEL UNIT WEIGHT CLAMP FORCE 87 psi [6 bar] CLAMP FORCE FACTOR Cf MAIN PIN UNCLAMP OR CLAMP TIME 87 psi [6 bar] FINGER RETRACT OR EXTEND TIME 87 psi [6 bar] MAIN PIN POWER CYLINDER DISPLACEMENT FINGER POWER CYLINDER DISPLACEMENT CLAMP UNCLAMP EXTEND RETRACT lb kg lb N imperial metric sec sec in 3 cm 3 in 3 cm 3 in 3 cm 3 in 3 cm 3 PLKD505-x-1250B PLKD505-x-1550B PLKD505-x-1850B PLKD505-x-2450B PLKD510-x-1250B PLKD510-x-1550B PLKD510-x-1850B PLKD510-x-2450B DIMENSIONS: SERIES PLKD CLAMPS.196 [5.0] [30.0].295 [7.5] [148.0] [128.0] 4X.433 [11.0] [30.0] [63.5] PLKD505 EXTENDED.939 [23.9] A PLKD510 EXTENDED.393 [10.0] [28.9].742 [18.9] [88.0].295 [7.5] 4X.3150 H7 [8.0] * C.787 [20.0] B PIN FULLY RETRACTED [130.5].512 [13.0] [37.0] [37.0].472 [12.0] [37.0] [35.5] [32.6] E D [92.5] [68.5] NOTE: *8 for PLKD5xx-x-1250B [63.0].476 [12.1] 4X 1/8-27 NPT PORT [1/8-28 BSPP] [38.0] [33.0] DIMENSION A MAX A MIN B C D E PLKD5xx-x-1250B in mm MODEL NUMBER PLKD5xx-x-1550B PLKD5xx-x-1850B in mm in mm PLKD5xx-x-2450B in mm All dimensions are reference only unless specifically toleranced. (800) PLK03
6 OPTIONS: SERIES PLK/PLKD CLAMPS MTxx MATERIAL THICKNESS ADJUSTMENT Provides the clamp with the adjustable lock already set for the maximum material thickness for the application. Specify the thickest material including tolerances and add 0.02 inches [0.5 mm] for clearance. Example: 1 mm material with a tolerance of ± 0.1 mm plus 0.5 mm clearance = 1.6 mm Specify MT16 and the clamp will arrive preset to lock at that material thickness. The sequenced design prevents the finger from retracting until the pin is fully extended. The part can move the amount of clearance between the lock bracket and adjustment screw, but the extended finger keeps the part trapped securely on the pin. LOCKING MECHANISM HOLDS PANELS IN PLACE IF PRESSURE IS LOST FDx FINGER DIRECTION Provides alternate finger directions for flexibility and customer convenience. For FD1 and FD3, consult factory for delivery. FD1 FD2 FD3 FD4 (STANDARD) PPx PORT LOCATION Provides alternate port locations for the cylinder providing flexibility and customer convenience. If PS or PR switches are ordered, ports must be on side 1. 2 PP2 3 PP3 1 PP1 4 PP4 Lxx PORT FITTINGS LAA (metal) or LBB (plastic) accessory provides 90 swivel fittings for ease of air line hook up. PF3 HEX PF2 FITTINGS MAY SWIVEL 360 FROM LOCATION SHOWN SELF SEALING SWIVEL MALE ELBOW FOR 1/4" [6 mm] TUBING CLOSE PORT P1 (CLAMP) OPEN PORT P1 (UNCLAMP) PF1 LETTER DIM P1 PF1 PF2 PF3 OPTION CODE LAA LBB MODEL NUMBER PLK5xx in mm 1/8 NPT 1/8 BSPP PART NUMBER IMPERIAL METRIC All dimensions are reference only unless specifically toleranced. PLK (800)
7 OPTIONS: SERIES PLK/PLKD CLAMPS PS1xx PR1xx STANDARD POSITION SENSING REVERSED POSITION SENSING This option provides sensing by affixing an aluminum housing to the side of the clamp body. SERIES PLK SWITCH SENSING OPTION UNCLAMPED CLAMPED PS1xx S02 S01 PR1xx S01 S02 SERIES PLKD SWITCH SENSING OPTION FULL RETRACT CLAMPED PS1xx S02 S01 PR1xx S01 S02 The unclamp switch (Series PLK) or full retract (Series PLKD) is fixed, needing no adjustment. The clamp switch is adjustable throughout the entire clamp stroke. Loosening the M5 screw and sliding it up or down adjusts the clamp switch position. See diagrams for satellite switch to quick disconnect pin number on page 14. Series PLK POSITION SENSOR OPTION CODE P S 1 E 9 Series PLKD PS(R)1x1 OPTION CODE, SEE TABLE 90 PS(R)1x9 OPTION CODE, SEE TABLE HOUSING OPTION SENSING POSITION SWITCH HOUSING POSITION.197 [5.0] HEX (ADJUSTABLE) PIN CLAMP SWITCH (FINGERS EXTENDED) SWITCH OPTION CONNECTOR POSITION (1) P - Positional Sensing S - Standard 1 - Position 1 N - No Switch 1 - Parallel to s R - Reversed A - 5-Pin AC/DC Switch 9 - Perpendicular to s NOTE: D - 4-Pin DC Switch 1) Position 9 is not available with switch option A. E - 4-Pin DC Switch F - 4-Pin DC Switch H - 4-Pin DC Switch OPTION CABLE J - 4-Pin DC Switch CODE CONNECTION PS(R)1A1 1/2-20 UNF PS(R)1D1(9) M12 x 1 PS(R)1E1(9) M12 x 1 PS(R)1F1(9) M12 x 1 PS(R)1H1(9) M12 x 1 PS(R)1J1(9) M12 x [78.7] [63.0] [39.9] [31.6] [42.3].282 [7.2].197 [5.0] HEX PIN RETRACTED SWITCH (FINGERS EXTENDED) (ADJUSTABLE) [55.9] [102.0] [39.9] [83.0] [31.6] Series PLK Series PLKD SWITCH OPTION SWITCH NUMBERS IF ORDERED SEPARATELY PHD SWITCH SWITCH TYPE VENDOR VENDOR PART NUMBER NUMBER A 5-pin AC/DC PLK(D) Turck Ni 2-Q6.5-ADZ FSB 5.4X4/S304 D 4 -pin DC - PNP PLK(D) P & F NBN2-F S6-E8-V1 E 4-pin dc - PNP PLK(D) Turck Ni 2-Q BDS-2AP6X3-H1141/S34 F 4-pin dc - PNP PLK(D) Efector IN 5375 H 4-pin dc - NPN PLK(D) Turck NBN2-F S6-E10-V1 J 4-pin DC - NPN PLK(D) Turck Ni 2-Q6.5-AN FS 4.4X3/S304 MATCHING CORDSETS 2 METERS LONG SWITCH OPTION PHD PART NUMBER CORDSET PART NUMBER A KB 5T-2 D V1-G-YE2M-PVC E RK 4.4T-2 F V1-G-YE2M-PVC H V1-G-YE2M-PVC J RK 4.4T-2 SWITCH HOUSING KIT SERIES KIT NUMBER PLK PLKD Kit includes: housing, plate, all pins and screws required for installation. Switches sold separately. All dimensions are reference only unless specifically toleranced. (800) PLK03
8 OPTIONS: SERIES PLK/PLKD CLAMPS R01 SENSOR FLAG Provides an external flag on a piston rod that extends out of the bottom of the clamp. The position of the flag indicates if the pin is extended or retracted. Flag travel varies with the panel thickness, 1 mm min. to 10 mm max. The white composite flag can be seen by optical sensing systems. Manually pushing the flag toward the clamp body will overcome the internal locking feature. When used with FR2 option on Series PLKD, pulling down manually will retract the pin below the top of the part support [69.5] [92.5] R3 R2 R1.394 [10.0] [35.0] DIMENSION R1 R2 R3 MODEL NUMBER PLK505 PLK510 mm in in mm R3 R1 R2.394 [10.0] [35.0] DIMENSION R1 R2 R3 MODEL NUMBER PLKD505 PLKD510 in mm in mm R02 DOUBLE ROD (PLK ONLY) Provides manual unlocking ability from below the clamp. Manually pushing the external rod that extends out the bottom will overcome the internal lock [69.5] R4 R5 R6.787 [20.0] DIMENSION R4 R5 R6 MODEL NUMBER PLK505 PLK510 mm in in mm FR2 MANUAL FINGER RETRACT (PLKD ONLY) Provides the ability to remove panels from the clamp by manually retracting the finger into the pin. Remove air pressure from the clamp ports and push the button in. As you do this, the finger will retract into the main pin and the part can be removed by pulling it up off the pin. If used in conjunction with the R01 option and after the finger is retracted, pulling on the R01 flag will retract the pin below the top of the part support. This allows the part to be removed in any direction. WITH FR2 OPTION: Step 1: Push finger button into retract finger into pin Step 2: Pull panel off top of pin WITH FR2 AND R01 OPTION: Step 1: Push finger button into retract finger into pin Step 2: Pull flag out to retract pin below part support Step 3: Remove panel in any direction 8 All dimensions are reference only unless specifically toleranced. PLK (800) R01 FR2 PUSH BUTTON
9 LOCK ADJUSTMENT PROCEDURE: SERIES PLK & PLKD CLAMPS 1) Loosen and remove the four socket head cap screws (see exploded views). 2) Lift the part support and rotate it 180 until the wrench hole is over the lock adjustment screw. 3) Replace the two screws to hold the part support in place during lock setup. Back the adjustment screw out until it touches the bottom of the part support. 4) Now, determine the thickest material the lock needs to hold. Add the material thickness, its tolerance, and add 0.02 inches [0.5 mm] for clearance. Example: 2 mm material with a tolerance of ± 0.1 mm mm clearance = 2.6 mm setup dimension 5) Place a 2.6 mm setup part (or feeler gage) under the finger and close the clamp with pressure. 6) With the finger clamping the 2.6 mm setup part, turn the lock screw in gently until you feel it touch the top of the lock lever. Once it touches, back it off 1/2 turn. 7) Drop air pressure on the clamp and try to pull the pin and finger up with the setup part. The pin should move very little and the finger will stay extended. (The clamp s sequenced design prevents the finger from retracting until the pin is fully extended. The part can move the amount of clearance between the lock bracket and adjustment screw, but the extended finger keeps the part trapped securely on the pin.) 8) Now, extend the pin with pressure or the manual opener. Remove the two screws holding the part support in place. Lift and rotate it 180 to hide the lock adjustment screw and retighten the four screws to 46 in-lb [5.2 Nm]. The lock is set. SHIM SHIM SHIM 1/2 TURN SERIES PLK SHOWN PLKD LOCK MECHANISM: STEP 1 STEP 2 STEP 3 STEP 4 Step 1: Remove cover and screws Step 2: Insert screwdriver between pins Step 3: Lift upper pin with screwdriver to retract finger Step 4: Push lower pin down to retract pin below top of part support (800) PLK03
10 EXPLODED VIEW: SERIES PLK CLAMPS 26 in-lb 2.9 Nm FD4 FINGER DIRECTION 4 -FD2 FINGER DIRECTION SEE LOCK ADJUSTMENT PROCEDURE in-lb 5.0 Nm in-lb 2.9 Nm in-lb 14.1 Nm NOTES: 1) -FD4 FINGER DIRECTION SHOWN IS STANDARD 2) PORT POSITION SHOWN IN POSITION 1 10 PLK (800)
11 PARTS LIST: SERIES PLK CLAMPS ITEM NO DESCRIPTION Part Support Assembly Locating Pin Assembly Drive Rod Body Assembly PLK510 Body Assembly PLK505 Sequence Cam Lock Bracket Assembly Cylinder Assembly without Magnet Standard R01 (flag rod) R02 (double rod) Cylinder Assembly with Magnet SW00, 41, 42, 51, 52 Standard R01 (flag rod) R02 (double rod) Cover Plate Part Support Mounting Screws Socket Set Screw Cover Plate Mounting Screw Dowel Pin Cover Plate Switch Cover Mounting Screws Tension Spring Dowel Pin Cylinder Mounting Screws 1250 IMPERIAL METRIC CLAMP SIZE IMPERIAL METRIC IMPERIAL METRIC IMPERIAL METRIC (800) PLK03
12 EXPLODED VIEW: SERIES PLKD CLAMPS in-lb 2.9 Nm -FD1 FINGER DIRECTION -FD2 FINGER DIRECTION -FD3 FINGER DIRECTION FD4 FINGER DIRECTION SEE LOCK ADJUSTMENT PROCEDURE in-lb 5.0 Nm in-lb 2.9 Nm 125 in-lb Nm NOTES: 1) -FD4 FINGER DIRECTION SHOWN IS STANDARD 2) PP1 PORT POSITION SHOWN IS STANDARD 12 PLK (800)
13 PARTS LIST: SERIES PLKD CLAMPS ITEM NO DESCRIPTION Part Support Assembly Locating Pin Assembly Standard, FDx Drive Rod FD2, FD4 (Standard) FD1, FD3 Body Assembly Sequence Cam Lock Bracket Assembly Cylinder Assembly without Magnet 505-Standard 510-Standard 505-R01 (flag rod) 510-R01 (flag rod) Cylinder Assembly with Magnet SW00, 41, 42, 51, Standard 510-Standard 505-R01 (flag rod) 510-R01 (flag rod) Cover Plate Part Support Mounting Screws Socket Set Screw Cover Plate Mounting Screw Dowel Pin Cover Cover Plate Assembly Cover Mounting Screws Tension Spring Drive Pin Assembly Cylinder Mounting Screws Strip Off Piston Strip Off Piston Seal Bore Plug Seal Bore Plug Retaining Ring 1250 IMPERIAL METRIC CLAMP SIZE IMPERIAL METRIC IMPERIAL METRIC IMPERIAL METRIC (800) PLK03
14 OPTIONS & KITS: SERIES PLK & PLKD CLAMPS SWITCH OPTION A PLK(D) Turck Part #: Ni 2-Q6.5-ADZ FSB 5.4X4/S304 LEDs GREEN: POWER YELLOW: OUTPUT STATUS (S01) RED: OUTPUT STATUS (S02) SO1 SO2.925 [23.5] THRU HOLE FOR M5 x 0.8 SHCS.157 [4.0] HEX.709 [18.0] 1/2-20 UNF OPTION CODE PSxAx PRxAx L1 SATELLITE UNCLAMPED S02 S01 RD/WH CLAMPED S01 S02 4-WIRE AC/DC QUICK DISCONNECT PIN NUMBER S01 = PIN 5 S02 = PIN 4 SENSOR S01 RD/BK LOAD 1 L [47.0] [23.0] L1 RD GN RD/YE LOAD 2 L2 SENSOR S02 SWITCH OPTION D PLK(D) P + F Part #: NBN2-F S6-E8-V1 (PNP) SWITCH OPTION H PLK(D) P + F Part #: NBN2-F S6-E10-V1 (NPN) LEDs GREEN: POWER YELLOW: OUTPUT STAT US (S1) RED: OUTPUT STATUS (S2).709 [18.0].925 [23.5] [47.0] THRU HOLE FOR M5 x 0.8 SHCS.157 [4.0] HEX.709 [18.0] M12 x1 CONNECTOR POSITION 1 90 CONNECTOR POSITION 9 OPTION CODE PSxDx PRxDx SATELLITE UNCLAMPED S2 S1 4-WIRE DC (V1 TYPE) NPN DUAL NORMALLY OPEN BN SENSOR S1 1 4 BK LOAD 2 3 BU WH LOAD SENSOR S2 + CLAMPED S1 S2 QUICK DISCONNECT PIN NUMBER S1 = PIN 4 S2 = PIN 2 4-WIRE DC (V1 TYPE) PNP DUAL NORMALLY OPEN BN SENSOR S1 1 4 BK LOAD BU WH LOAD 2 SENSOR S2 + SWITCH OPTION E PLK(D) Turck Part #: Ni 2-Q BDS-2AP6X3-H1141/S34 (PNP) SWITCH OPTION J PLK(D) Turck Part #: Ni 2-Q6.5-AN FS 4.4X3/S304 (NPN) LEDs GREEN: POWER YELLOW: OUTPUT STAT US (S01) RED: OUTPUT STAT US (S02).709 [18.0].925 [23.5] [47.0] THRU HOLE FOR M5 x 0.8 SHCS.157 [4.0] HEX.713 [18.1] M12 x 1 CONNECTOR POSITION 1 90 CONNECTOR POSITION 9 OPTION CODE PSxEx PRxEx 4-WIRE DC (V1 TYPE) NPN DUAL NORMALLY OPEN BN SENSOR S BK LOAD 2 3 BU WH LOAD SENSOR S02 SATELLITE UNCLAMPED S02 S01 + CLAMPED S01 S02 QUICK DISCONNECT PIN NUMBER S01 = PIN 4 S02 = PIN 2 4-WIRE DC PNP DUAL NORMALLY OPEN BN SENSOR S BK LOAD BU WH LOAD 2 SENSOR S02 + SWITCH OPTION F PLK(D) Efector Part #: IN 5375 (PNP) LEDs GREEN: POWER YELLOW: OUTPUT STAT US (S1) RED: OUTPUT STATUS (S2).709 [18.0].925 [23.5] [47.0] THRU HOLE FOR M5 x 0.8 SHCS.157 [4.0] HEX.709 [18.0] M12 x1 CONNECTOR POSITION 1 90 CONNECTOR POSITION 9 OPTION CODE PSxFx PRxFx SATELLITE UNCLAMPED S2 S1 CLAMPED S1 S2 QUICK DISCONNECT PIN NUMBER S1 = PIN 4 S2 = PIN 2 4-WIRE DC PNP DUAL NORMALLY OPEN BN SENSOR S1 1 4 BK LOAD BU WH LOAD 2 SENSOR S All dimensions are reference only unless specifically toleranced. PLK (800)
15 OPTIONS & KITS: SERIES PLK & PLKD CLAMPS [31.4] (6.500) ([165.1]) [25.5].079 [2.0].177 [4.5] M8 x 1.0 THREAD.110 [2.8].157 [4.0] SW41 1 NPN SWITCH INSTALLED SW51 1 PNP SWITCH INSTALLED SW42 2 NPN SWITCHES INSTALLED SW52 2 PNP SWITCHES INSTALLED PART NO. DESCRIPTION Solid State NPN (Sink) 5-28V DC, 165 mm Cable with Quick Disconnect PART NO. DESCRIPTION SWITCHING LOGIC Solid State Output, Normally Open SENSOR TYPE NPN Current Sinking OPERATING VOLTAGE 5-28 VDC SWITCHING CURRENT 200 ma max SWITCHING RATING 6 W max CURRENT CONSUMPTION 20 24V max (Switch Active) VOLTAGE DROP 0.5 V@ 200 ma max LEAKAGE CURRENT 0.01 ma max INDICATOR Red LED CABLE Ø 2.8, 3C, PVC SENSITIVITY 40 Gauss TEMPERATURE RANGE -10 to 70 C SHOCK 50G VIBRATION 9G ENCLOSURE CLASSIFICATION IP67 (NEMA 6) PROTECTION CIRCUIT Power Source Reverse Polarity, Surge Suppression PART NO. DESCRIPTION Solid State PNP (Source) 5-28V DC, 165 mm Cable with Quick Disconnect PART NO. DESCRIPTION SWITCHING LOGIC Solid State Output, Normally Open SENSOR TYPE PNP Current Sourcing OPERATING VOLTAGE 5-28 VDC SWITCHING CURRENT 200 ma max SWITCHING RATING 6 W max CURRENT CONSUMPTION 20 24V max (Switch Active) VOLTAGE DROP 0.5 V@ 200 ma max LEAKAGE CURRENT 0.01 ma max INDICATOR Green LED CABLE Ø 2.8, 3C, PVC SENSITIVITY 40 Gauss TEMPERATURE RANGE -10 to 70 C SHOCK 50G VIBRATION 9G ENCLOSURE CLASSIFICATION IP67 (NEMA 6) PROTECTION CIRCUIT Power Source Reverse Polarity, Surge Suppression SINK (NPN) BROWN BLACK LOAD BLUE + DC - DC PIN 1 (BROWN) PIN 3 (BLUE) PIN 4 (BLACK) SOURCE (PNP) BROWN BLACK LOAD BLUE + DC - DC PIN 1 (BROWN) PIN 3 (BLUE) PIN 4 (BLACK) SWITCH SLOT LOCATIONS When switches are ordered, they will be installed on side 2. SWITCHES PLK(D)5xx xx CORDSET WITH FEMALE QUICK CONNECT PIN 2/4 WIRE COLOR BLACK PIN 1 WIRE COLOR BROWN A MODEL NO LETTER DIM. A [2 m] [5 m].402 [10.2] PIN 3 WIRE COLOR BLUE.689 [19.3] [34.8] CABLE x.177 [4.5] NOTE: ALL NUMBERS IN [ ] ARE METRIC AND ARE IN mm All dimensions are reference only unless specifically toleranced. (800) PLK03
16 CLAMP ACTUATION STEPS: SERIES PLKD CLAMPS SERIES PLKD CLAMP ACTUATION STEPS Series PLKD s locating pin can fully retract below the part support, allowing for easier panel removal. A 3 position open center valve is required to control the extending and retracting of the main pin. A 2 position valve controls the extending and retracting of the finger. STEP PORT PRESSURIZATION SEQUENCE PIN EXTEND PORT PIN RETRACT PORT FINGER EXTENDED PORT FINGER RETRACTED PORT 1. Load Panel High Off Off High 2. Extend High Off High Off 3. Retract Main Pin Off High High Off 4. Perform Operation to Panel Off High High Off 5. Drop Pressure Off Off High Off 6. Retract Off Off Off High 7. Fully Retract Main Pin Off High Off High 8. Remove Panel Off High Off High 9. Extend Pin High Off Off High Retract Extend Extend Extend Extend Pin Retract Pin Retract Pin Extend Pin Extend 1. Load panel 2. Extend finger 3. Retract main pin 4. Perform operation to panel 5. Drop pressure (zero pressure in cylinder) Retract Retract Retract Retract Pin Retract Pin Retract Pin Extend 6. Retract finger (zero pressure in cylinder) 7. Fully retract main pin 8. Remove panel 9. Extend pin If a single world switch is used (which is standard), the conditions typically sensed are: Pin in clamped position ( will be extended) Pin fully retracted below top of part support ( will be retracted) Displacement for PLKD Pin Cylinder: PLKD505 Clamp 3.85 in 3 [63.0 cm 3 ] Unclamp 4.6 in 3 [75.4 cm 3 ] PLKD510 Clamp 4.30 in 3 [70.5 cm 3 ] Unclamp 5.2 in 3 [85.3 cm 3 ] Cylinder: PLKDxxx Clamp 0.26 in 3 [4.3 cm 3 ] Unclamp 0.26 in 3 [4.3 cm 3 ] SUGGESTED SETUP FOR PLKD UNIT Retract Pin Extend 16 9/ PLK (800)
Ideal for part clamping in weld areas
PIN LOCATING CLAMPS FOR THE AUTOMOBILE INDUSTRY Series PLK Ideal for part clamping in weld areas Completely enclosed finger/pin prevents weld slag from entering Locking mechanism holds panel in place if
More informationFOR PART CLAMPING IN WELD AREAS
PLk SERIES PLK PIN LOCATING CLAMP for the Automotive Industry IDEAL FOR PART CLAMPING IN WELD AREAS Enclosed Finger Weld Field Immune Switches PLK01 A ORDERING DATA: SERIES PLK CLAMPS INDEX: Ordering Data
More informationARM OVER CLAMP FOR ASSEMBLY AND WELDING
ARM OVER CLAMP FOR ASSEMBLY AND WELDING Superior part holding Provides widest range of high clamping force in its class OPTIONS: AD001 AU001 AL001 AR000 SW42 PS1E1 Patent Pending ORDERING DATA: SERIES
More informationPSP SERIES PSP SHOT PIN. Superior part locating and positioning. Provides the best repeatability in its class. Patent Pending PSP01A
PSP SERIES PSP SHOT PIN Superior part locating and positioning. Provides the best repeatability in its class. Port Fittings Option Switch Options Weld Cover Option Patent Pending ORDERING DATA: SERIES
More informationPLC. SERIES PLC PIN LOCATING CLAMP for the Automotive Industry IDEAL FOR PART CLAMPING IN WELD AREAS PLC01 D
PLC SERIES PLC PIN LOCTING CLMP for the utomotive Industry IDEL FOR PRT CLMPING IN WELD RES Strip Cylinder Option PTENTS #7,82,26 B2 #7,8,607 B2 #7,56,98 B2 PLC0 D ORDERING DT: SERIES PLC CLMPS INDEX:
More informationPNC NUMBER CRUNCHER Series PNC44 with non-spherical mounting bracket Series PNC55 with PS(R) option Series PNC66 PNC06
PNC NUMBER CRUNCHER Automated stamping for part identification Series PNC44 with non-spherical mounting bracket Series PNC55 with PS(R) option Series PNC06 PNC Automated stamping for part identification
More informationSERIES PNC NUMBER CRUNCHER
SERIES PNC NUMBER CRUNCHER Automated Stamping for Part Identification Tandem Cylinder Switch Mounting Options Welding Slag Shields PATENTS #,15,8 #,,88 B1 #,99,1 B ORDERING DATA: SERIES PNC clamps INDEX:
More informationSERIES PA SWING ARM CLAMPS for the Automotive Industry
Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:
More informationIdeal for robotic and end effector applications
MINIATURE CLAMPS FOR WORKHOLDING APPLICATIONS Ideal for robotic and end effector applications Bayonet Body Option -B11 ORDERING DATA: SERIES GRM CLAMP SIZE 1 INDEX: Ordering Data Page 2 Benefits Page 3
More informationIdeal for robotic and end effector applications
MINIATURE CLAMPS FOR WORKHOLDING APPLICATIONS Ideal for robotic and end effector applications Bayonet Body Option -B11 ORDERING DATA: SERIES GRM CLAMP SIZE 1 INDEX: Ordering Data Page 2 Benefits Page 3
More informationSERIES PNC CLAMP. Automated Stamping for Part Identification HEAVY DUTY MODEL PATENT #6,125,684 PNC05. Switch Mounting Options.
SERIES PNC CLAMP Automated Stampg for Part Identification HEAVY DUTY MODEL Tandem Cylder Switch Mountg Options Weldg Slag Shields PATENT #,5,8 Copyright 00, by PHD Inc. All Rights Reserved. Prted the U.S.A.
More informationHEAVY LIFTERS FOR MATERIAL HANDLING
HEAVY LIFTERS FOR MATERIAL HANDLING Ideal for automated, high load part liftg the automotive and assembly mache builder dustries Available as a drop- replacement M002 Mountg M001 Mountg Switches Stop Collars
More informationParallel long travel pneumatic gripper
Parallel long travel pneumatic gripper Major Benefits Compact, low profile design with long jaw travel and large moment capacities Total jaw travels up to 125 mm (4.921 in) allows for larger parts, encapsulated
More informationPNEUMATIC 180 ANGULAR GRIPPER
PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece
More informationGRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS. Compact Precision Grippers Ideal for a Wide Range of Applications
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS Compact Precision Grippers Ideal for a Wide Range of Applications Series GRA Parallel Series GRV Angular GRAV0 ORDERING DATA: SERIES GRA
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationGRH SERIES GRH PARALLEL GRIPPERS. Long Jaw Travel, Low Profile Gripper with Large Moment Capacities
GRH SERIES GRH PARALLEL GRIPPERS Long Jaw Travel, Low Profile Gripper with Large Moment Capacities Wide Jaw Guide System for Minimal Tooling Deflection Million Cycle Life Flexible Mounting Optional Multi-Position
More informationUPE/SPE SERIES PART EJECTOR ONE ACTUATOR TO LIFT AND TIP TO EJECT
ISO 9001 REGISTERED UPE/SPE SERIES PART EJECTOR ONE ACTUATOR TO LIFT AND TIP TO EJECT OPTIONAL TIP ANGLES 11, 22, 31, 39, 45 TREATED STEEL TIP PLATE WITH TAPPED HOLES/DOWELS & KEY FOR TOOLING WORLD SWITCH
More informationUPE/SPE SERIES PART EJECTOR ONE ACTUATOR TO LIFT AND TIP TO EJECT
ISO 9001 REGISTERED UPE/SPE SERIES PART EJECTOR ONE ACTUATOR TO LIFT AND TIP TO EJECT OPTIONAL TIP ANGLES 11, 22, 31, 39, 45 TREATED STEEL TIP PLATE WITH TAPPED HOLES/DOWELS & KEY FOR TOOLING WORLD SWITCH
More informationUB2 SERIES GOLD LINE SHOT PIN
ISO 9001 REGISTERED UB2 SERIES GOLD LINE SHOT PIN NO LUBRICATION REQUIRED NPT OR G PORTS INTEGRATED CYLINDER SHROUD SOLID STATE CYLINDER SWITCH OR WORLD SWITCH NAAMS STANDARD MOUNTING RAP OR RIGID COUPLER
More informationPARALLEL PNEUMATIC 3-JAW GRIPPER
PARALLEL PNEUMATIC 3-JAW GRIPPER Major Benefits 3 jaw design provides self-centerg and maximum contact between part and jaw toolg Low profile to grip force and jaw travel ratios Eight sizes available both
More informationLST SERIES PART POSITIONER
ISO 9001 REGISTERED LST SERIES PART POSITIONER ONE ACTUATOR TO ETEND AND TIP TOOLING AWAY REPEATABLE RETRACTED POSITION CHOICE OF TIP ANGLES* 11, 22, 31, 39, 45 TREATED STEEL TIP PLATE WITH TAPPED HOLES/DOWELS
More informationINFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS
INFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance or machine documentation.
More informationExtruded Thrusters. Brochure
Extruded Thrusters Brochure Chrome plated stainless steel guide shafts optimize bearing performance Mounting flexibility: Through & C-bore Tapped bottom Tapped rear Bottom T-slots Bronze bushing for heavy
More informationBrochure. Compact Cylinders. Setting a new standard for: Quality Reliability Value Global Compatibility
Brochure Compact Cylinders Setting a new standard for: Quality Reliability Value Global Compatibility Actuators - Compact Cylinders How to Order MODEL MACQ - Compact Cylinder MAGNET Blank - No Magnet S
More informationPARALLEL PNEUMATIC HEAVY DUTY GRIPPER
PARALLEL PNEUMATIC HEAVY DUTY GRIPPER Major Benefits Compact, low profile design provides high grip force and large moment capacities with low overall weight. Ultra-rigid, wear-compensatg jaw guide system
More informationMAINTENANCE MANUAL UPE/SPE PART EJECTORS LST/SST PART POSITIONERS
ENGINEERED PRODUCTS ISO 9001 REGISTERED MAINTENANCE MANUAL UPE/SPE PART EJECTORS LST/SST PART POSITIONERS TIP PLATE SIDE PLATE CAM SLOT UPE/SPE WORLD SWITCH (INTEGRATED) WORLD SWITCH (BOX-STYLE) SHROUD
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationpneumatic swing clamps
pneumatic swing clamps Sizing and Application Chart Series Standard Features Bore Clamping Clamping Force [lbf.]n 90 Series [0.86] 22 [0.] 13 [34] 0 Arm rotates at the top of stroke Shielded rod protects
More informationUB4 SERIES GOLD LINE SHOT PIN
ISO 9001 REGISTERED UB4 SERIES GOLD LINE SHOT PIN NPT or G PORTS INTEGRATED CYLINDER INTEGRATED WORLD SWITCH LIGHTWEIGHT ALUMINUM BODY RAP OR RIGID COUPLER CORROSION & WELD SPATTER RESISTANT STEEL RAM.
More informationSERIES SFP SLIDES INFORMATION SHEET. Ordering Data. U.S. Patent No. 6,857,780 International Patent No. CA PART NO.
Ordering Data SERIES SFP SLIDES INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationINFORMATION SHEET: SERIES SxL/SxH DESIGN 1 [5] SLIDES
INFORMATION SHEET: SERIES SxL/SxH DESIGN [] SLIDES IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationMPE PART EJECTOR MST PART POSITIONER
PART EJECTOR PART POSITIONER ISO 9001 REGISTERED CAM ACTION LIFTS UP TIP PLATE 30mm AND TIPS OUT 30 CAM ACTION ROTATES TIP PLATE 30 THEN CLAMPS DOWN VERTICALLY 25mm NAAMS STANDARD TAPPED/DOWEL HOLES TO
More informationFor material handling and clamping of small workpieces
For material handling and clamping of small workpieces Power Clamp Cylinder New ø25, ø32 Compact Type INFORMATION 34 mm Lightweight Compact High clamping force Lock function 53 mm Lightweight Weight :
More informationUB4 SERIES GOLD LINE SHOT PIN
ISO 9001 REGISTERED UB4 SERIES GOLD LINE SHOT PIN NPT or G PORTS INTEGRATED PNEUMATIC CYLINDER INTEGRATED WORLD SWITCH LIGHTWEIGHT ALUMINUM BODY SHROUD RAP OR RIGID COUPLER CORROSION & WELD SPATTER RESISTANT
More informationUB4 SERIES GOLD LINE SHOT PIN
ISO 9001 REGISTERED UB4 SERIES GOLD LINE SHOT PIN NPT or G PORTS* INTEGRATED PNEUMATIC CYLINDER INTEGRATED WORLD SWITCH* WITH SWITCH GUARD LIGHTWEIGHT ALUMINUM BODY SHROUD* RAP OR RIGID COUPLER* CORROSION
More informationGROUND BLOCK RETRACT CYLINDERS
ISO 9001 REGISTERED GROUND BLOCK RETRACT CYLINDERS FOR ALL MIG & ARC WELDING APPLICATIONS IN FIXTURES, TRUNIONS, AND DIAL TABLES. INSULATED GROUND BLOCK CYLINDERS ARE IDEAL FOR SINGLE-POINT WELDING. SOLID
More informationSeries OCG Pneumatic Cylinders
New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING
More informationClimax Pneumatics Cnomo NFE Cylinders
Climax Pneumatics Cnomo NFE 49001 Cylinders End Caps Tube Tie Rods Seals Piston Rod Diecast Aluminum Anodized Aluminum Zinc Coated or Stainless Steel Polyurethane Chromium Coated Steel Working Pressure
More informationClimax Pneumatics. Cnomo NFE Cylinders Easley, South Carolina
Climax Pneumatics Cnomo NFE 49001 Cylinders 1-800-732-8704 Easley, South Carolina End Caps Tube Tie Rods Seals Piston Rod Diecast Aluminum Anodized Aluminum Zinc Coated or Stainless Steel Polyurethane
More informationWORKHOLDING SOLUTIONS & AUTOMATED SHEET METAL STAMPING PNEUMATIC CLAMPS
phdinc.com (800) 624-8511 WORKHOLDING SOLUTIONS & AUTOMATED SHEET METAL STAMPING PNEUMATIC CLAMPS LOW COST OF OWNERSHIP, EXCEPTIONAL FLEXIBILITY, AND UNSURPASSED IN RUGGEDNESS 2-JAW CLAMPS PIN CLAMPS SWING
More informationSERIES SCV SLIDES DESIGN 2/6 INFORMATION SHEET
SERIES SC SLIDES DESIGN / INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationOptimized for OEM requirements at a lower price.
The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO
More informationgrme SERIES GRME ELECTRIC CLAMP Electric Clamp with Greater Flexibility & Durability for the Automotive Industry GRME01A
grme SERIES GRME ELECTRIC CLAMP for the Automotive Industry Electric Clamp with Greater Flexibility & Durability GRME1A ORDERING DATA: SERIES GRME ELECTRIC CLAMPS INDEX: Ordering Data Pages 2 and 3 Benefits
More informationThe Price Alternative Pneumatic Cylinders and Slides
The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES
More informationSST SERIES PART POSITIONER
ISO 9001 REGISTERED SST SERIES PART POSITIONER ONE ACTUATOR TO ETEND AND TIP TOOLING AWAY REPEATABLE RETRACTED POSITION TREATED STEEL TIP PLATE WITH TAPPED HOLES/DOWELS & KEY FOR TOOLING 30 TIP ANGLE BASE
More informationSeries OCQ Pneumatic Compact Cylinders
The Price Alternative Series OCQ Pneumatic Compact Cylinders Ten bore sizes available in incremental stroke lengths Standard shock pads reduce end of travel impact Standard magnets for switch sensing capability
More information82L Series. Pneumatic Power Clamps Ordering Information 03 B8 H 82L 2G B PC-PPC-15. Base Model Size Description 2G 3G 3N 4G 4N
82L..-2... Series Pneumatic Power Clamps Ordering Information 82L 2G B -2 3 B8 H Base Size Description Arm Style Description 2G 3G 3N 4G 4N Ø25 (G1/8) Cylinder Bore Size Ø32 (G1/8) Cylinder Bore Size Ø32
More informationacting, spring return, spring extend and double rod models. Hall Effect sensors and magnetic piston versions are also available.
AIR FORCE ONE COMPACT CYLINDER Clippard Instrument Laboratory, Inc. Air Force One compact cylinders are available in double acting, spring return, spring extend and double rod models. Hall Effect sensors
More informationSERIES BCZ2D NOZZLE CYLINDER START-UP AND INFORMATION SHEET
Model Number Definition SERIES BCZD NOZZLE CYLINDER START-UP AND INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with cylinder installation, setup and repair.
More informationPIN CLAMP MAINTENANCE MANUAL PCS, PCT, PCM
ENGINEERED PRODUCTS ISO 9001 REGISTERED PIN CLAMP MAINTENANCE MANUAL PCS, PCT, PCM STANDARD BULLET NOSE PIN PNEUMATIC NPT or G PORTS STANDARD LOW PROFILE PIN STANDARD STEEL PART BACKUP SOLID STATE CYLINDER
More informationCD34CNFLFxxx. Capacitive sensor, Foreground Suppression. Main features. Main functions. Description
Capacitive sensor, Foreground Suppression Main features Compact housing Supply voltage: 10 to 30 VDC Output: 100 ma, NPN or PNP preset Make or break switching function LED indication for output and power
More informationWBG Series Wide Body Grippers
WBG Series Wide Body Grippers www.numatics.com Table of Contents WBG Series Parallel Grippers Features and Benefits 3 How To Order 3 WBGS 60 Dimensions & Technical 4 WBGS 90 Dimensions & Technical 5 WBGL
More information: 660 N. For material handling and clamping of small workpieces. CKZT25 -X2797 (Base Type) Power Clamp Cylinder INFORMATION. ø
For material handling and clamping of small workpieces INFORMATION Power Clamp Cylinder ø25 Compact Type 34 mm Lightweight Compact High clamping force Lock function 53 mm Lightweight Weight : 580 g Compact
More informationGRM SERIES GRM CLAMPS R JAW STYLE. Compact Jaw Profi le for Limited Space Applications Largest Total Clamp Force of All Series GRM2 Clamps GRMR01
GRM SERIES GRM CLAMPS R STYLE Compact Jaw Profi le for Limited Space Applications Largest Total Clamp Force of All Series GRM2 Clamps ORDERING DATA: SERIES GRM CLAMP STYLE R INDEX: Ordering Data Page 2
More informationDB4 GUIDED SLIDE APPLICATIONS: ISO 9001 REGISTERED RETRACTABLE PINS & LOCATORS PUSHERS CROWDERS THRUSTERS SMALL LIFTERS SLIDES
ISO 9001 REGISTERED DB4 GUIDED SLIDE 1/4" NPT or G1/4 PORTS RAP OR RIGID COUPLER TOOL MOUNTING SURFACE WELKER 70mm BORE PNEUMATIC CYLINDER SOLID STATE CYLINDER SWITCH NAAMS STOPS OR WELKER SMART STOPS
More informationPBS Series Power Block Slide
PBS Series Power Block Slide www.numatics.com Table of Contents PBS Series Features and Benefits 3 How To Order 4 Technical Specifications 4 Dimensions 5 Quick Disconnect Cables 6 Switch Information 6-7
More informationReed, Electronic. MOVEMENT > Series CST-CSV-CSH proximity switches GENERAL DATA
> Series CST-CSV-CSH proximity switches Series CST - CSV and CSH magnetic proximity switches Reed, Electronic» Designed to fit into the grooves provided in the profile barrel of the cylinder» The three
More informationBest Price, Best Design, Best Delivery
Best Price, Best Design, Best Delivery GRM Clamps GRM Clamps Greater clamping Forces, Flexibility, Durability, & low cost Electric Versions Available! Series GRME fixed or spherical mounting brackets for
More informationModular Gripping Products. Modular Gripping Products Introduction
Modular Gripping Products Introduction GR84 Enclosed Modular Mini-Clamp Offers several different jaw and tip options. Can be flange or cylinder mounted. High clamping force and fast opening and closing
More informationSeries OCG Pneumatic Cylinders
The Price Alternative Series OCG Pneumatic Cylinders Repairable round body cylinders 6 bore sizes 1 standard stroke lengths High speed/double acting www.phdinc.com (8) 624-811 OCG1 ORDERING DATA DESIGN
More informationLinear Slides Pneumatic
Linear Slides Pneumatic Mini DLM Modular Series DLM Series No Adaptor Plates Required! DLM-07M-50-50-P mini linear slide. Shown smaller than actual size. Highly Configurable Modular Automation Exclusive
More informationClimax Pneumatics. ISO 6432 Interchangeable Cylinders Easley, South Carolina
Climax Pneumatics ISO 6432 Interchangeable Cylinders 1-800-732-8704 Easley, South Carolina End Caps Anodized Aluminum Tube Stainless Steel AISI 304 Piston Seals Rod Bushing Brass ø 8-10 - 12 Polyurethane
More informationCS1 COMPACT POWERED SLIDE
ISO 9001 REGISTERED CS1 COMPACT POWERED SLIDE WELKER 50mm BORE COMPACT CYLINDER NPT OR G PORTS OPTIONAL SOLID STATE CYLINDER SWITCH AVAILABLE METAL SHROUD KEEPS RAILS COVERED AT ALL TIMES (MOVES WITH )
More informationTPCA Power Clamps Catalog
TPCA Power Clamps Catalog Pneumatically Operated, Weld-Contamination Sealed, Heavy Duty Power Clamps > Degree of arm opening can be adjusted from -12 > One clamp for both dual or single arms > Uses TRILOK
More informationANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM
ANGULAR PNEUMATIC GRIPPERS 1 SERIES DIRECTCONNECT TM with spring assist DCT-RE Series No Adaptor Plates Required Highly Configurable Modular Construction, Exclusive DIRECTCONNECT TM Technology Full Jaw
More informationMAINTENANCE MANUAL MPE PART EJECTOR MST PART POSITIONER
ENGINEERED PRODUCTS ISO 9001 REGISTERED MAINTENANCE MANUAL MPE PART EJECTOR MST PART POSITIONER WORLD SWITCH MPE MST STANDARD SHROUD PNEUMATIC CYLINDER SOLID STATE CYLINDER SWITCH SHEET 1 REV 4/29/2016
More informationSERIES BCS STRETCH ROD CYLINDERS
BCS y Q ua lit Support SOLUTIONS for the Plastic Bottle Blowing Industry DIRECT REPLACEMENT FOR SIDEL SERIES AND SERIES MACHINES P U O C PACK TI A S y er iv el D ENTS GR N O G COM P IN G SERIES BCS STRETCH
More informationCONTROLS. Bray Pneumatic Actuators & Accessories. Technical Manual. A Division of BRAY INTERNATIONAL, Inc.
CONTROLS A Division of BRAY INTERNATIONAL, Inc. Bray Pneumatic Actuators & Accessories Technical Manual TM-056 Pneumatic Actuator - 08//00 Bray Pneumatic Actuators & Accessories Technical Manual - Table
More informationLOW PROFILE PNEUMATIC PARALLEL GRIPPER
LOW PROFILE PNEUMATIC PARALLEL GRIPPER Major Benefits Large hardened jaw drivg surfaces Low profile Two jaw travels per size Manifold portg options Four bore sizes with five gripper sizes available both
More informationWG Series Double Guided Wedge Grippers
WG Series Grippers www.numatics.com Table of Contents WG Series Parallel Gripper Features & Benefits 3 How To Order 4 WGS50 Dimensions 5 WGS50 Technical Specifications 5 WGL50 & WGS90 Dimensions 6 WGL50
More informationINTEGRATED HYDRAULIC BRAKE ACTUATORS
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit
More informationGuided Slides and Guided Rods
Guided Slides and Guided Rods Guided Slides & Guided Rods: Table of Contents Guided Slides & Guided Rods Guided Slides Product Features...pg 2 Quick Reference...pg 2 How to Order...pg 3 Dimensional Data...pg
More informationAngular and Parallel Grippers
CAP0551_Grippers_R2.qxp:OEM_TA 2/8/17 2:16 PM Page ii Angular and Parallel Grippers Table of Contents: Grippers Angular Grippers, Parallel Grippers and Options & Accessories Angular Grippers Introduction...
More informationVERTICAL THRUSTER PNEUMATIC SLIDE
ERTIAL TRUSTER PNEUMATI SLIDE Major Benefits Oversize guide rods Simple design Ideal for non-rotating applications Easy tooling mounting to tool plate bore sizes Units are powered by PD s rugged Series
More informationTable of Contents. ISO/VDMA Series
Table of Contents ISO/VDMA Series...3-22 Features and Benefits... 3 How to Order.... Technical Information... 5 Dimensions Profile Version...6-7 Tie-Rod Version...8-9 Mounting Parts...-16 Switches... 17
More informationReed, Electronic. MOVEMENT > Proximity switches Series CST-CSV-CSH GENERAL DATA
> Proximity switches Series CST-CSV-CSH Magnetic proximity switches Series CST - CSV and CSH Reed, Electronic»» Designed to fit into the cylinder profile barrel»» The three Series CST - CSV - CSH are suitable
More informationTable of Contents FE Series Features and Benefits
Table of Contents FE Series.................................................................................... -6 Features and Benefits..................................................................................
More informationSTRETCH ROD CYLINDERS for Krones Stretch Blow Molding Machines
PACKAGING COMPONENTS PLASTIC GROUP BCK STRETCH ROD CYLINDERS for Krones Stretch Blow Molding Machines Quality Delivery Support SOLUTIONS A division of PHD Simplified Pneumatic System Easy Maintenance Better
More informationToday Numatics is proud to be a part of the Industrial Automation Division of Emerson Electric Co.
Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Our broad spectrum of standard, custom developed products and application components, have made a significant
More informationParallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
More informationSERIES GRK PARALLEL GRIPPERS
GRK SERIES GRK PARALLEL GRIPPERS Ideal for Assembly and Robotics Highest Grip Force Its Class Precision Jaw Movement High Moments Highest Grip Force to Height Ratio Precision Jaw Movement Wear Compensatg
More informationPneumatic Power Clamps
15.61 Pneumatic Power Clamps Series 82M-6 Product Overview (last time in catalog) Features: modular design shielded body, dirt-resistant compact design high holding torques long life cycle low weight (aluminium
More informationACRO USER MANUAL MODEL 600 PINCH VALVES INSTALLATION AND OPERATION INFORMATION
ACRO USER MANUAL MODEL 600 PINCH VALVES INSTALLATION AND OPERATION INFORMATION TABLE OF CONTENTS 3 3 4 5 6 6 7 7 8 8 11 Introduction Terms & Abbreviations Product Labeling Product Listing Meet the Products
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
More informationEQ Series OEM Aluminum NFPA Interchangeable Cylinder Line
Series OEM Aluminum NFPA Interchangeable Cylinder Line www.numatics.com Table of Contents EQ Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Rod Ends 6 Dimensions 7 How to Order - EQ Series
More informationReed, Electronic. MOVEMENT > Series CST-CSV-CSH proximity switches GENERAL DATA
> Series CST-CSV-CSH proximity switches Series CST - CSV and CSH magnetic proximity switches Reed, Electronic»» Designed to fit into the grooves provided in the profile barrel of the cylinder»» The three
More informationFLEX PIVOT NWP WELKER SMART STOPS* OR NAAMS STOPS. 100mm BORE NON-LOCKING PNEUMATIC CYLINDER* NPT OR G PORTS*
ISO 9001 REGISTERED FLEX PIVOT NWP FIXED SIDE MOUNTING WELKER SMART STOPS* OR NAAMS STOPS MOVABLE FLAT MOUNTING STYLE* MOVABLE BLADE MOUNTING STYLE* FIXED SIDE MOUNTING 100mm BORE NON-LOCKING PNEUMATIC
More informationphdinc.com (800)
phdinc.com (800) 624-8511 WORKHOLDING SOLUTIONS & automated sheet metal stamping PNEUMATIC CLAMPS low cost of ownership, exceptional flexibility, and unsurpassed in ruggedness 2-jaw clamps pin clamps SWING
More informationPARALLEL PNEUMATIC MINIATURE GRIPPER
PARALLEL PNEUMATI MINIATURE GRIPPER Major enefits High grip force to weight ratio ompact size Two body styles with a total of four sizes available in both imperial and metric versions Spring assist on
More informationISO/VDMA Series ISO 6431 and VDMA Cylinder Line
ISO/VDMA Series ISO 6431 and VDMA 24562 Cylinder Line www.asco.com Table of Contents ISO/VDMA Series Features and Benefits 2 How to Order 3 Technical Information 4 Dimensions Tie-Rod Version 5 Mounting
More informationPosition Control Hard chrome-plated carbon steel piston rod with blackened threads and wrench flats Sintered bronze rod bushing Internally lubricated
Position Control System Products Cylinders 7.3-7.9 Cylinder Rod Lock 7.10-7.11 Cylinder Accessories 7.12-7.15 Pneu-Turn 7.16-7.24 Position Control System 7.25-7.36 Digital Panel Meter 7.37-7.42 Electronic
More informationKRONES DIRECT REPLACEMENTS
PLASTIC PACKAGING COMPONENTS GRO Quality Support Delivery SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD PLASTIC PACKAGING COMPONENTS P KRONES DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE
More informationSSI. Synchronous Serial Interface
T E M P O S O N I C S R S E R I E S SSI Synchronous Serial Interface P r o d u c t S p e c i f i c a t i o n s PARAMETER Measured Variable: Resolution: Non-Linearity: SPECIFICATION Displacement Up to 0.002
More informationRUA-112M. Description. Spring. Blank None. Spring Closed Spring Open RE RI Inductive Case Description
RUA Series Angular Grippers Features and Benefits How To Order Features: Robust, shielded, high force gripper Optional springs for part retention in case of air loss or increased grip-force Side or top
More informationISO/VDMA Series ISO 6431 and VDMA Cylinder Line ISO 6431 and VDMA Cylinder Line w w w. n u m a t i c s. c o m
ISO/VDMA Series ISO 6431 and VDMA 24562 Line Cylinder Line ISO 6431 andcylinder VDMA 24562 w w w. n u m a t i c s. c o m Table of Contents ISO/VDMA Series Features and Benefits 3 How to Order 4 Technical
More informationElectric Slide Solutions
Electric Slide Solutions Series ESCV Electric Thruster Slide Designed for vertical or non-rotating applications Built on the field proven Series SCV, the electric version offers many of the same benefits
More informationPMS - PKS / PMW - PKW series
features / series warranty warranty Innovative housing (double enclosure) Cutting oils resistant (for machines tool) Immersion proof (sealing IP 67/68) High frequency switching Complementary output (NO+NC),
More informationPhotoelectric Sensors 55 Series
PG.05E.07.T.E August 007 High Optical Performance and a Built-In Swivel Bracket for Easy and Precise Alignment Contents Overview...................... Model Selection, Sensors........ Model Selection,
More informationCANBUS G. Up to mm ( in.) < ± 0.01% of full stroke or ± 0.04 mm ( in.), whichever is greater*
27295 8/11/03 T 7:42 AM Page 1 E M P O S O N I C S R S E R I E S CANBUS 550541 G P r o d u c t S p e c i f i c a t i o n s PARAMETER S P E C I F I C AT I O N Measured Variable: Resolution: Non-Linearity:
More information