ARM OVER CLAMP FOR ASSEMBLY AND WELDING
|
|
- Verity Pitts
- 6 years ago
- Views:
Transcription
1 ARM OVER CLAMP FOR ASSEMBLY AND WELDING Superior part holding Provides widest range of high clamping force in its class OPTIONS: AD001 AU001 AL001 AR000 SW42 PS1E1 Patent Pending
2 ORDERING DATA: SERIES PEC CLAMPS INDEX: Ordering Data Page 2 Benefits Page Dimensions Pages 4 and 5 Engineering Data Page 6 Cam Design Page 7 Options & Kits Pages 8 to 11 Switch Options Pages 12 to 14 Exploded View & Parts List Page 15 POSITIONAL SENSING BLANK - None See Note 2. PECxxR PECxxL PECxxD CYLINDER SWITCH OPTION BLANK - None (See Note 1) SW00 - Magnet for Switches Installed SW41-1 NPN Switch Installed SW42-2 NPN Switches Installed SW51-1 PNP Switch Installed SW52-2 PNP Switches Installed Available on PEC22, PECx, PEC44 only. See Note 1. TO ORDER SPECIFY: Model, Clamp Size, Bore Size, Output Shaft, Design No., Arm Rotation, and additional options if desired. MOUNTING OPTIONS BLANK - Standard M001 - Flange mounting cylinder body Available on PEC4 only. M002 - Flange mounting plate Available on PEC2 & only. PORT LOCATION BLANK is Standard Position 1 P2 - Position 2 P - Position P4 - Position 4 P2 & P4 available on PEC22, PEC, PEC44 units only. ARM OPTIONS BLANK - None ARM ROTATION (degrees) 96 - U-Style Arm See Note Standard OUTPUT SHAFT D-Double L-Left R-Right CLAMP SIZE 2,, 4 See Clamp Compatibility chart. - SW42 - PS1D1 - - M001 - LAA P - A L PEC 4 D - 2 SEAL OPTION BLANK - Standard V4 - Harsh Environment See Note 1. CONNECTOR POSITION 1 - Parallel to output shaft 9 - Perpendicular to output shaft SENSING OPTION S - Standard R - Reversed PORT FITTINGS (BOTH PORTS) BLANK - None LAA - 90 Swivel Elbow, Metal LBB - 90 Swivel Elbow, Plastic ORIENTATION 0-0 Clamp 9-90 Clamp SHAPE/LOCATION D-Straight, Both Sides L-Straight, Left R-Straight, Right U-U-Style, Centered DESIGN. 2 - Imperial 6 - Metric SWITCH HOUSING POSITION 1 - Position 1 BORE SIZE 2-25 mm - 2 mm 4-40 mm 5-50 mm See Clamp Compatibility chart. MODEL SWITCH OPTION N- No Switch A- 5-pin AC/DC Switch (Turck) D- 4-pin PNP DC Switch (P + F) E- 4-pin PNP DC Switch (Turck) F- 4-pin PNP DC Switch (Efector) H- 4-pin NPN DC Switch (P + F) J- 4-pin NPN DC Switch (Turck) MOUNTING STYLE 00 - Blank 01 - Standard Mounting OPTION COMPATIBILITY OPTION CLAMP TORQUE CLAMP COMPATIBILITY CLAMP TES: 1) Magnet will be installed if cylinder switches are ordered. Units with -V4 option are not available with magnet in cylinder (Swxx option). 2) All units come standard with PSxxx/PRxxx switch target. ) Model PECxxD must be ordered for AUxxx arm options. 4) All U-arms come standard with 96 rotation. Contact PHD for units that require 105 rotation and U-arm combinations. -SWxx -M002 -M001 -P4 -P2 MODEL PEC22 PEC2 PEC PEC4 PEC44 Nm in-lb BORE mm SIZE MODEL PEC22 PEC2 PEC PEC4 PEC Options not listed are available on all units. 2 Copyright 2016, by PHD, Inc. All Rights Reserved. Printed in the U.S.A.
3 SERIES PEC CLAMPS enclosed design prevents particles and weld slag from entering PATENT PENDING cam design locks clamp in closed position for the last 6 of rotation, ensuring part retention if air pressure is lost and makes initial setups easier cam design provides widest range of high clamping force in its class multiple output shaft options available for mounting arms on either or both sides providing clamping flexibility depending on your application requirements each clamp size is available in two bore sizes, providing a variety of configurations and options to fit a wide range of clamping solutions cylinder mounted switches provide a low cost solution for position sensing of non-welding applications Our cam design sets us apart from typical toggles see page 7 for more info! WELDING APPLICATION This application depicts a typical welding application where the PEC clamps hold down the parts while the robot welds smaller parts into place. The PHD cam design provides the means to have more part variation without having to adjust for part variation. Major Benefits Manual release of clamp is achieved by using common tools without removing plugs while providing contamination resistance. Self-locking internal threads throughout eliminate need for thread locking adhesives or additional locking components. Flange mounting option provides a unique alternative to typical clamp mounting configurations. All units are positional switch ready. Industry Uses Assembly and Welding
4 ENSIONS: SERIES PEC CLAMPS PEC2x Note: PEC22D dimensioned [56].25 [6.4] C L [56.4].60 [16] [18] 2X.94 [10].54 [9] [49.5] C L 1.78 [5].689 [17.5] R [5.5] [0].197 [5].118 [] DETAIL S.669 [17] C L.984 [25] [198.5] [149] P2 P.788 [20] [40] 1/8 NPT [1/8 BSPP] OPEN PORT (UNCLAMP) 1/8 NPT [1/8 BSPP] CLOSE PORT (CLAMP) P4 B1 [18] S [25] [0] [48] [6] 2X M5 x 0.8 THD x.94 [10] DP BOTH SIDES 2X 5 mm SLIP-FIT DOWEL HOLE x.197 [5] DP BOTH SIDES B [22] 4X M5 x 0.8 THD x.94 [10] DP B1 B15 P2 P P4 PEC [18] [28] PEC PECx Note: PECD dimensioned [64].25 [6.4] C L [7].866 [22] 2X.510 [1].42 [11] 1.77 C [5] L.689 [17.5] [0].754 [19.2].15 [8] DETAIL S 2.2 [59] R 2.68 [67] S [1.5] P [24] [175] P.906 [2] [46] P4 B1 1/8 NPT [1/8 BSPP] OPEN PORT (UNCLAMP) 1/8 NPT [1/8 BSPP] CLOSE PORT (CLAMP).787 [20] B [42] [62] [76] 2X M5 x 0.8 THD x.94 [10] DP BOTH SIDES 2X 6 mm SLIP-FIT DOWEL HOLE x.26 [6] DP BOTH SIDES B1 B15 P2 P P4 PEC PEC All dimensions are reference only unless specifically toleranced.
5 ENSIONS: SERIES PEC CLAMPS PEC4x Note: PEC44D dimensioned.25 [6.4].86 [86].965 [24.5].60 [16] 2.91 [74] C L [40] C L.787 [20] 1.78 [5].54 [9].827 [21] 2X.60 [16] DETAIL S 2.91 [74] R.149 [80] S [292] 8.58 [218] P2 P [26] [52.1] 1/8 NPT [1/8 BSPP] OPEN PORT (UNCLAMP) 1/8 NPT [1/8 BSPP] CLOSE PORT (CLAMP).984 [25] [50] 2.95 [75].484 [88.5] 2X M6 x 1 THD x.94 [10] DP BOTH SIDES 2X 6 mm SLIP-FIT DOWEL HOLE x.26 [6] DP BOTH SIDES.878 [98.5] P4 B1 B [26].140 [.5] 4X M10 x 1.5 THD x.591 [15] DP CYLINDER MOUNT [45] [52] B1 B15 P2 P P4 PEC OUTPUT SHAFT CONFIGURATIONS PECxxD PECxxR PECxxL All dimensions are reference only unless specifically toleranced. 5
6 ENGINEERING DATA: SERIES PEC CLAMPS SPECIFICATIONS PISTON SEALS WORKING PRESSURE OPERATING TEMPERATURE LUBRICATION SERIES PEC Carboxilated Nitrile, compression type 40 psi min psi max. -20 to +180 F [-28 to +82 C] Factory lubricated for life MODEL SIZE PEC22 PEC2 PEC PEC4 PEC44 BORE mm CLAMP TORQUE 87 psi [6 bar] in-lb Nm MAX. HOLDING TORQUE in-lb Nm CLOSE OR OPEN TIME sec DISPLACEMENT CLOSE OPEN cm in in cm WEIGHT lb kg TYPICAL BACKLASH MIN. VALVE RATING Cv Clamp force is clamp torque divided by the distance from clamp pivot. Holding torque is the maximum external torque that can be applied against the arm without destroying the clamp once the clamp has entered the locking/high force region. Maximum tooling weight is the recommended maximum additional weight at a given distance from the pivot that will provide reliability after millions of cycles. WEIGHT lb [kg] 7 [.2] 6 [2.7] 5 [2.] 4 [1.8] [1.4] 2 [.9] MAXIMUM TOOLING WEIGHT PEC4 PEC 1 [.5] PEC [50.8] [76.2] [101.6] [127] [152.4] [177.8] [20.2] LENGTH OF CLAMP ARM in [mm] LOCKING MECHANISM The Series PEC Clamp incorporates a cam/roller locking mechanism that prevents the arm from opening if air pressure is lost. The lock works in a range of 6 degrees from the fully closed position. 6 LOCKING RANGE/ HIGH FORCE REGION To manually unlock the clamp, first remove air pressure, then insert a small screwdriver or hex wrench (approximately 4 mm) through the slit in the lock release cover. Press down firmly and move the cam approximately one inch to get it out of the locking area. The lock release cover is made of a durable urethane material that will reclose and form a dust cover once the screwdriver or hex wrench is removed. Press down firmly to unlock arm Release LOCKING RANGE/ HIGH FORCE REGION 6
7 CAM DESIGN: SERIES PEC CLAMPS PHD s cam design maintains clamp force and locking range without the need for adjustable features. Toggle clamps require adjustable features or shims to maintain clamp force and locking feature. CAM VS. TOGGLE COMPARISON Example: PHD Cam vs. Toggle Toggle clamp with 1200 in-lb [16 Nm] torque vs. PHD clamp with 900 in-lb [102 Nm] torque Typical part variation =.04" [1 mm] Clamp force required = 250 lb [1112 N] Unit must stay locked during clamping Distance from clamp pivot to hold down location = " [76 mm] Force = Torque/Distance CLAMP ANGLE % OF FORCE 100% 100% 100% 100% 100% 100% 70% PHD CAM JAW IS LOCKED CLAMP FORCE lb [N] [14] [14] [14] [14] [14] [14] [94] % OF FORCE 100% 70% 55% 50% 40% 0% 25% Shaded areas indicate values do not meet requirements for toggle designs. TYPICAL TOGGLE CLAMP FORCE lb [N] JAW IS LOCKED Maybe No No No No [1779] [1245] [979] [890] [712] [54] [458] PART VARIATION CLAMP DISTANCE CLAMP FORCE PART VARIATION CLAMP ANGLE 1200 VS. TOGGLE COMPARISON CLAMP TORQUE in-lb [Nm] TOGGLE LOCKS TYPICAL TOGGLE PHD CAM LOCKS ROTATION degree 7
8 OPTIONS & KITS: SERIES PEC CLAMPS Axxxx ARM OPTION This option provides a clamping arm at multiple locations and orientations in both standard and blank mounting configurations. Consult PHD for alternative arm designs. A R 0 01 SHAPE/LOCATION D-Straight, Both Sides L-Straight, Left R-Straight, Right U-U-Style. Centered ORIENTATION 0-0 Clamp 9-90 Clamp MOUNTING STYLE 00 - Blank 01 - Standard Mounting ARM OPTIONS - SHAPE/LOCATION Double Right Left Centered AD001 AR001 AL001 AU001 ARM OPTIONS - ORIENTATION 90 Open/Unclamped Closed/ Clamped 0 Closed/Clamped Open/Unclamped Ax0xx - 0 Ax9xx - 90 CAUTION: Clamps with U-Style arms in the 90 clamp position (AU9xx) and positional sensors require units to have no more than 96 rotation to prevent damage to unit. AUxxx 8
9 OPTIONS & KITS: SERIES PEC CLAMPS ARxxx A6 2X A9 2X A10 DOWEL HOLE A5 A4 A A7 2X A11 SHCS A12 HEX A1 TORQUE A2 A8 A1 A1 A2 A A4 A5 A6 A7 A8 A9 A10 A11 A12 A1 PEC2x mm in mm SLIP FIT M5 SHCS M4 HEX 75 in-lb 8.5 Nm PECx mm SLIP FIT M6 SHCS M5 HEX 125 in-lb 14 Nm PEC4x mm SLIP FIT M8 SHCS M6 HEX 250 in-lb 28 Nm TE: ENSIONS A4 THROUGH A10 T AVAILABLE WITH Axx00 OPTION Blank Arm Kits Standard Arm Kits MODEL PEC2x PECx PEC4x ARM, STRAIGHT BLANK (-Axx00) ARM KITS ARM, STRAIGHT STD (-Axx01) KITS INCLUDE ARM, ARM CLAMP AND SCREWS AUxxx A6 2X A9 A8 Must be ordered as: PECxxD-x-96 A5 A4 A 2X A11 SHCS A12 HEX A1 TORQUE A7 A2 2X A10 DOWEL HOLE A1 A1 A2 A A4 A5 A6 A7 A8 A9 A10 A11 A12 A1 PEC2x mm in mm SLIP FIT M5 SHCS M4 HEX 75 in-lb 8.5 Nm PECx mm SLIP FIT M6 SHCS M5 HEX 125 in-lb 14 Nm PEC4x mm SLIP FIT M8 SHCS M6 HEX 250 in-lb 28 Nm TE: ENSIONS A4 THROUGH A10 T AVAILABLE WITH Axx00 OPTION Blank U-Style Kit Standard U-Style Kit MODEL PEC2x PECx PEC4x ARM, U-STYLE BLANK (-AUx00) KITS ARM, U-STYLE STD (-AUx01) ROTATION ARM KITS INCLUDE ARM, ARM CLAMP AND SCREWS. ROTATION KITS ADD PARTS TO PISTON AND REQUIRES SOME DISASSEMBLY. All dimensions are reference only unless specifically toleranced. 9
10 OPTIONS & KITS: SERIES PEC CLAMPS M001 FLANGE MOUNTING CYLINDER BODY This option provides an integrated flange mount to the bottom of the clamp to simplify mounting. This option is only available on PEC4 units. Consult PHD for alternative mounting options. B21 B24 B2 B20 4X B22 B2 B17 B19 B18 B2 B17 B18 B19 B20 B21 B22 B2 B24 PEC PEC4 M002 FLANGE MOUNTING PLATE This option provides a bolt-on mount to the bottom of the clamp to simplify mounting. This option is only available on PEC2 and units. Consult PHD for alternative mounting options. B24 B21 B2 B20 4X B22 KIT INCLUDES MOUNTING PLATE AND MOUNTING SCREWS - 2 SCREWS FROM EXISTING CYLINDER WILL BE REPLACED BY LONGER SCREWS TORQUE TO 70 in-lb [8 Nm] PEC2 B2 B17 B19 B18 B2 B17 B18 B19 B20 B21 B22 B2 B24 in PEC mm KIT INCLUDES MOUNTING PLATE AND MOUNTING SCREWS TORQUE TO 500 in-lb [56 Nm] 10 All dimensions are reference only unless specifically toleranced.
11 OPTIONS & KITS: SERIES PEC CLAMPS Px PORT LOCATION This option specifies alternate port locations for the cylinder providing flexibility and customer convenience. 2 TES: 1) NUMBERS ENCLOSED IN HEX INDICATE PORT POSITION 2) POSITIONS 2 AND 4 ARE ONLY AVAILABLE ON PEC22, PEC, AND PEC44 UNITS PORT POSITION 1 IS STANDARD ON ALL UNITS 1 4 Lxx PORT FITTINGS LAA (metal) or LBB (plastic) option provides 90 swivel fittings for ease of air line hook up. PF HEX FITTINGS MAY SWIVEL 60 FROM LOCATION SHOWN SELF SEALING SWIVEL MALE ELBOW FOR 1/4" [6 mm] TUBING OPEN PORT P1 (UNCLAMP) CLOSE PORT P1 (CLAMP) P1 PF1 PF2 PF PECxx 1/8 NPT 1/8 BSPP OPTION CODE LAA LBB PART NUMBER IMPERIAL METRIC PF2 PF1 V4 SEAL OPTION This option provides polyurethane piston seals for longer life in harsh environment applications. This option does not allow the use of magnets in the cylinder and therefore is not compatible with SWxx switch options. All dimensions are reference only unless specifically toleranced. 11
12 SWITCH OPTION: SERIES PEC CLAMPS PSxxx PRxxx STANDARD POSITION SENSING REVERSED POSITION SENSING This option provides arm open and arm closed sensing by affixing an aluminum housing to the back of the clamp body. The adjustable switches sense the position of a target on the cam as the clamp opens and closes. PS positions satellite switch S02/S2 to sense open and S01/S1 to sense close. PR positions the satellite switch S01/S1 to sense open and S02/S2 to sense close. See tables and diagrams for satellite switch to quick disconnect pin number relationships. SENSING OPTION S - Standard R - Reversed SWITCH HOUSING POSITION 1 - Position 1 PS1D9 *TE: Connector position 9 is not available with switch option A CONNECTOR POSITION 1 - Parallel to output shaft 9 - Perpendicular to output shaft* SWITCH OPTION N- No Switch A- 5-pin AC/DC Switch D- 4-pin PNP DC Switch (P + F) E- 4-pin PNP DC Switch (Turck) F- 4-pin PNP DC Switch (Efector) H- 4-pin NPN DC Switch (P + F) J- 4-pin NPN DC Switch (Turck) 2X PS6 SHCS PS7 HEX PS8 TORQUE PS1x9 90 PS1 PS2 PS1x1 POSITIONAL SENSOR MOUNTING MODEL PEC2x PECx PEC4x KIT N Includes switch housing and mounting hardware MATCHING CORDSETS 2 METERS LONG SWITCH OPTION A D E F H J PHD PART NUMBER CORDSET PART NUMBER KB 5T-2 V1-G-YE2M-PVC RK 4.4T-2 V1-G-YE2M-PVC RK 4.4T-2 V1-G-YE2M-PVC PS1xx PR1xx PS4 PS PS5 PS1 PS2 PS PS4 PS5 PS6 PS7 PS8 PEC2x mm in M5 SHCS M4 HEX 70 in-lb 7.9 Nm PECx M5 SHCS M4 HEX 70 in-lb 7.9 Nm PEC4x M5 SHCS M4 HEX 70 in-lb 7.9 Nm (CLOSED- CLAMP) POSITION 1-2 LOOP CABLES AS SHOWN (OPEN- UNCLAMP) POSITION 7-9 CABLE GROOVE GEOMETRY T SHOWN FOR CLARITY CLAMP CLOSED CLAMP CLOSED CLOSED SENSOR SWITCH SENSOR PS1xx PR1xx S01 S02 S01 S02 OPEN SENSOR SWITCH SENSOR PS1xx PR1xx S02 S01 S02 S01 S02 S01 S02 S01 SWITCH LOCATION HOLE 1-2 HOLE 2- SWITCH LOCATION HOLE 4-6 HOLE 5-7 HOLE 6-8 HOLE 7-9 PS1xx HOLE LOCATIONS Italicized indicates default positions 12 All dimensions are reference only unless specifically toleranced.
13 SWITCH OPTION: SERIES PEC CLAMPS SWITCH OPTION A PEC Turck Part #: Ni 2-Q6.5-ADZ FSB 5.4X4/S04 LEDs GREEN: POWER YELLOW: OUTPUT STATUS (S01) RED: OUTPUT STATUS (S02) SO1 SO2.925 [2.5] THRU HOLE FOR M5 x 0.8 SHCS.157 [4.0] HEX [18.0] 1/2-20 UNF OPTION CODE PSxAx PRxAx L1 SATELLITE UNCLAMPED S02 S01 RD/WH CLAMPED S01 S02 4-WIRE AC/DC QUICK DISCONNECT PIN NUMBER S01 = PIN 5 S02 = PIN 4 SENSOR S01 RD/BK LOAD 1 L [47.0] [2.0] L1 RD GN RD/YE LOAD 2 L2 SENSOR S02 SWITCH OPTION D PEC P + F Part #: NBN2-F S6-E8-V1 (PNP) SWITCH OPTION H PEC P + F Part #: NBN2-F S6-E10-V1 (NPN) LEDs GREEN: POWER YELLOW: OUTPUT STAT US (S1) RED: OUTPUT STATUS (S2) [18.0].925 [2.5] [47.0] THRU HOLE FOR M5 x 0.8 SHCS.157 [4.0] HEX [18.0] M12 x1 CONNECTOR POSITION 1 90 CONNECTOR POSITION 9 OPTION CODE PSxDx PRxDx OPTION CODE PSxEx PRxEx 4-WIRE DC (V1 TYPE) NPN DUAL RMALLY OPEN BN SENSOR S BK LOAD 2 BU WH OPTION CODE PSxFx PRxFx LOAD SENSOR S02 SATELLITE UNCLAMPED S2 S1 SATELLITE UNCLAMPED S02 S01 + SATELLITE UNCLAMPED S2 S1 CLAMPED S1 S2 SWITCH OPTION E PEC Turck Part #: Ni 2-Q BDS-2AP6X-H1141/S4 (PNP) SWITCH OPTION J PEC Turck Part #: Ni-2-Q6.5-AN FS 4.4X/S04 (NPN) LEDs GREEN: POWER YELLOW: OUTPUT STAT US (S01) RED: OUTPUT STAT US (S02) [18.0].925 [2.5] [47.0] THRU HOLE FOR M5 x 0.8 SHCS.157 [4.0] HEX.71 [18.1] M12 x1 CONNECTOR POSITION 1 CONNECTOR POSITION 9 SWITCH OPTION F PEC Efector Part #: IN 575 (PNP) LEDs GREEN: POWER YELLOW: OUTPUT STAT US (S1) RED: OUTPUT STATUS (S2) [18.0].925 [2.5] [47.0] 90 THRU HOLE FOR M5 x 0.8 SHCS.157 [4.0] HEX [18.0] M12 x1 CONNECTOR POSITION 1 90 CONNECTOR POSITION 9 4-WIRE DC (V1 TYPE) NPN DUAL RMALLY OPEN BN SENSOR S1 1 4 BK LOAD 2 BU WH LOAD SENSOR S2 + QUICK DISCONNECT PIN NUMBER S1 = PIN 4 S2 = PIN 2 4-WIRE DC (V1 TYPE) PNP DUAL RMALLY OPEN BN SENSOR S1 1 4 BK LOAD 1 2 BU CLAMPED S01 S02 WH LOAD 2 SENSOR S2 4-WIRE DC PNP DUAL RMALLY OPEN BN SENSOR S BK LOAD 1 2 BU CLAMPED S1 S2 WH LOAD 2 SENSOR S02 4-WIRE DC PNP DUAL RMALLY OPEN BN SENSOR S1 1 4 BK LOAD 1 2 BU WH LOAD 2 SENSOR S2 + QUICK DISCONNECT PIN NUMBER S01 = PIN 4 S02 = PIN 2 + QUICK DISCONNECT PIN NUMBER S1 = PIN 4 S2 = PIN 2 + All dimensions are reference only unless specifically toleranced. 1
14 SWITCH OPTION: SERIES PEC CLAMPS 1.26 [1.4] (6.500) ([165.1]) [25.5].079 [2.0].177 [4.5] M8 x 1.0 THREAD.110 [2.8].157 [4.0] SW41 1 NPN SWITCH INSTALLED SW51 1 PNP SWITCH INSTALLED SW42 2 NPN SWITCHES INSTALLED SW52 2 PNP SWITCHES INSTALLED PART DESCRIPTION Solid State NPN (Sink) 5-28V DC, 165 mm Cable with Quick Disconnect PART DESCRIPTION Solid State PNP (Source) 5-28V DC, 165 mm Cable with Quick Disconnect SPECIFICATIONS SWITCHING LOGIC Solid State Output, Normally Open SENSOR TYPE NPN Current Sinking OPERATING VOLTAGE 5-28 VDC SWITCHING CURRENT 200 ma max SWITCHING RATING 6 W max CURRENT CONSUMPTION 20 24V max (Switch Active) VOLTAGE DROP ma max LEAKAGE CURRENT 0.01 ma max INDICATOR Red LED CABLE 2.8, C, PVC SENSITIVITY 40 Gauss TEMPERATURE RANGE -10 to 70 C SHOCK 50G VIBRATION 9G ENCLOSURE CLASSIFICATION IP67 (NEMA 6) PROTECTION CIRCUIT Power Source Reverse Polarity, Surge Suppression SPECIFICATIONS SWITCHING LOGIC Solid State Output, Normally Open SENSOR TYPE PNP Current Sourcing OPERATING VOLTAGE 5-28 VDC SWITCHING CURRENT 200 ma max SWITCHING RATING 6 W max CURRENT CONSUMPTION 20 24V max (Switch Active) VOLTAGE DROP ma max LEAKAGE CURRENT 0.01 ma max INDICATOR Green LED CABLE 2.8, C, PVC SENSITIVITY 40 Gauss TEMPERATURE RANGE -10 to 70 C SHOCK 50G VIBRATION 9G ENCLOSURE CLASSIFICATION IP67 (NEMA 6) PROTECTION CIRCUIT Power Source Reverse Polarity, Surge Suppression SINK (NPN) BROWN BLACK LOAD BLUE + DC - DC PIN 1 (BROWN) PIN (BLUE) PIN 4 (BLACK) SOURCE (PNP) BROWN BLACK LOAD BLUE + DC - DC PIN 1 (BROWN) PIN (BLUE) PIN 4 (BLACK) SWITCH SLOT LOCATIONS SWITCHES INSTALLED ON THIS SIDE PEC22, PEC, PEC44 PEC xx CORDSET WITH FEMALE QUICK CONNECT PIN 2/4 WIRE COLOR BLACK PIN 1 WIRE COLOR BROWN A MODEL A [2 m] [5 m].402 [10.2] PIN WIRE COLOR BLUE.689 [19.] [4.8] CABLE x.177 [4.5] TE: ALL NUMBERS IN [ ] ARE METRIC AND ARE IN mm 14 All dimensions are reference only unless specifically toleranced.
15 EXPLODED VIEW & PARTS LIST: SERIES PEC CLAMPS KEY DESCRIPTION PEC22/PEC2 1 Right Body Left Body Pinion Assembly PECxxD - Double PECxxL - Left PECxxR - Right Cam Link Roller Bearing Switch Slot Cover Dowel Pin Roller-Link-Cam Dowel Pin Piston Rod-Cam Body Mounting Screws Switch Slot Cover Screw Lock Release Cover Cylinder Assembly * xx-xx-xx-xxx 5 Cylinder Mounting Screws *Consult PHD for cylinder assembly replacement part numbers PEC/PEC * xx-xx-xx-xxx PEC44/ * xx-xx-xx-xxx KIT DESCRIPTION Cylinder Repair Kit (Standard) Cylinder Repair Kit (-V4 Option) Blank Straight Arm Kit Straight Arm Kit Blank U-Style Arm Kit U-Style Arm Kit 96 Rotation Kit Positional Sensor Mounting Kit Flange Mounting Kit (-M002) PEC PEC PEC PEC PEC TES: 1) Cylinder repair kits include all seals, retaining rings, and shock pads required to rebuild cylinder. Consult PHD for piston rod, bushing and bore plug replacements. 2) Position sensor mounting kit includes switch housing and mounting hardware. 15
16 5/16 987
PLK/PLKD SERIES PLK/PLKD PIN LOCATING CLAMPS
PLK/PLKD SERIES PLK/PLKD PIN LOCATING CLAMPS Ideal for part clamping in weld areas Disappearing Pin Weld Field Immune Switch PLK03 PLK/PLKD PIN LOCATING CLAMPS PATENT PENDING Major Benefits Completely
More informationIdeal for part clamping in weld areas
PIN LOCATING CLAMPS FOR THE AUTOMOBILE INDUSTRY Series PLK Ideal for part clamping in weld areas Completely enclosed finger/pin prevents weld slag from entering Locking mechanism holds panel in place if
More informationFOR PART CLAMPING IN WELD AREAS
PLk SERIES PLK PIN LOCATING CLAMP for the Automotive Industry IDEAL FOR PART CLAMPING IN WELD AREAS Enclosed Finger Weld Field Immune Switches PLK01 A ORDERING DATA: SERIES PLK CLAMPS INDEX: Ordering Data
More informationPSP SERIES PSP SHOT PIN. Superior part locating and positioning. Provides the best repeatability in its class. Patent Pending PSP01A
PSP SERIES PSP SHOT PIN Superior part locating and positioning. Provides the best repeatability in its class. Port Fittings Option Switch Options Weld Cover Option Patent Pending ORDERING DATA: SERIES
More informationPNC NUMBER CRUNCHER Series PNC44 with non-spherical mounting bracket Series PNC55 with PS(R) option Series PNC66 PNC06
PNC NUMBER CRUNCHER Automated stamping for part identification Series PNC44 with non-spherical mounting bracket Series PNC55 with PS(R) option Series PNC06 PNC Automated stamping for part identification
More informationSERIES PNC NUMBER CRUNCHER
SERIES PNC NUMBER CRUNCHER Automated Stamping for Part Identification Tandem Cylinder Switch Mounting Options Welding Slag Shields PATENTS #,15,8 #,,88 B1 #,99,1 B ORDERING DATA: SERIES PNC clamps INDEX:
More informationPLC. SERIES PLC PIN LOCATING CLAMP for the Automotive Industry IDEAL FOR PART CLAMPING IN WELD AREAS PLC01 D
PLC SERIES PLC PIN LOCTING CLMP for the utomotive Industry IDEL FOR PRT CLMPING IN WELD RES Strip Cylinder Option PTENTS #7,82,26 B2 #7,8,607 B2 #7,56,98 B2 PLC0 D ORDERING DT: SERIES PLC CLMPS INDEX:
More informationIdeal for robotic and end effector applications
MINIATURE CLAMPS FOR WORKHOLDING APPLICATIONS Ideal for robotic and end effector applications Bayonet Body Option -B11 ORDERING DATA: SERIES GRM CLAMP SIZE 1 INDEX: Ordering Data Page 2 Benefits Page 3
More informationIdeal for robotic and end effector applications
MINIATURE CLAMPS FOR WORKHOLDING APPLICATIONS Ideal for robotic and end effector applications Bayonet Body Option -B11 ORDERING DATA: SERIES GRM CLAMP SIZE 1 INDEX: Ordering Data Page 2 Benefits Page 3
More informationSERIES PA SWING ARM CLAMPS for the Automotive Industry
Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:
More informationHEAVY LIFTERS FOR MATERIAL HANDLING
HEAVY LIFTERS FOR MATERIAL HANDLING Ideal for automated, high load part liftg the automotive and assembly mache builder dustries Available as a drop- replacement M002 Mountg M001 Mountg Switches Stop Collars
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationPNEUMATIC 180 ANGULAR GRIPPER
PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece
More informationGRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS. Compact Precision Grippers Ideal for a Wide Range of Applications
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS Compact Precision Grippers Ideal for a Wide Range of Applications Series GRA Parallel Series GRV Angular GRAV0 ORDERING DATA: SERIES GRA
More informationSERIES PNC CLAMP. Automated Stamping for Part Identification HEAVY DUTY MODEL PATENT #6,125,684 PNC05. Switch Mounting Options.
SERIES PNC CLAMP Automated Stampg for Part Identification HEAVY DUTY MODEL Tandem Cylder Switch Mountg Options Weldg Slag Shields PATENT #,5,8 Copyright 00, by PHD Inc. All Rights Reserved. Prted the U.S.A.
More informationGRH SERIES GRH PARALLEL GRIPPERS. Long Jaw Travel, Low Profile Gripper with Large Moment Capacities
GRH SERIES GRH PARALLEL GRIPPERS Long Jaw Travel, Low Profile Gripper with Large Moment Capacities Wide Jaw Guide System for Minimal Tooling Deflection Million Cycle Life Flexible Mounting Optional Multi-Position
More informationGRM SERIES GRM CLAMPS R JAW STYLE. Compact Jaw Profi le for Limited Space Applications Largest Total Clamp Force of All Series GRM2 Clamps GRMR01
GRM SERIES GRM CLAMPS R STYLE Compact Jaw Profi le for Limited Space Applications Largest Total Clamp Force of All Series GRM2 Clamps ORDERING DATA: SERIES GRM CLAMP STYLE R INDEX: Ordering Data Page 2
More informationParallel long travel pneumatic gripper
Parallel long travel pneumatic gripper Major Benefits Compact, low profile design with long jaw travel and large moment capacities Total jaw travels up to 125 mm (4.921 in) allows for larger parts, encapsulated
More informationINFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS
INFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance or machine documentation.
More informationgrme SERIES GRME ELECTRIC CLAMP Electric Clamp with Greater Flexibility & Durability for the Automotive Industry GRME01A
grme SERIES GRME ELECTRIC CLAMP for the Automotive Industry Electric Clamp with Greater Flexibility & Durability GRME1A ORDERING DATA: SERIES GRME ELECTRIC CLAMPS INDEX: Ordering Data Pages 2 and 3 Benefits
More informationPARALLEL PNEUMATIC 3-JAW GRIPPER
PARALLEL PNEUMATIC 3-JAW GRIPPER Major Benefits 3 jaw design provides self-centerg and maximum contact between part and jaw toolg Low profile to grip force and jaw travel ratios Eight sizes available both
More informationUPE/SPE SERIES PART EJECTOR ONE ACTUATOR TO LIFT AND TIP TO EJECT
ISO 9001 REGISTERED UPE/SPE SERIES PART EJECTOR ONE ACTUATOR TO LIFT AND TIP TO EJECT OPTIONAL TIP ANGLES 11, 22, 31, 39, 45 TREATED STEEL TIP PLATE WITH TAPPED HOLES/DOWELS & KEY FOR TOOLING WORLD SWITCH
More informationParallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
More informationUPE/SPE SERIES PART EJECTOR ONE ACTUATOR TO LIFT AND TIP TO EJECT
ISO 9001 REGISTERED UPE/SPE SERIES PART EJECTOR ONE ACTUATOR TO LIFT AND TIP TO EJECT OPTIONAL TIP ANGLES 11, 22, 31, 39, 45 TREATED STEEL TIP PLATE WITH TAPPED HOLES/DOWELS & KEY FOR TOOLING WORLD SWITCH
More informationLST SERIES PART POSITIONER
ISO 9001 REGISTERED LST SERIES PART POSITIONER ONE ACTUATOR TO ETEND AND TIP TOOLING AWAY REPEATABLE RETRACTED POSITION CHOICE OF TIP ANGLES* 11, 22, 31, 39, 45 TREATED STEEL TIP PLATE WITH TAPPED HOLES/DOWELS
More informationLOW PROFILE PNEUMATIC PARALLEL GRIPPER
LOW PROFILE PNEUMATIC PARALLEL GRIPPER Major Benefits Large hardened jaw drivg surfaces Low profile Two jaw travels per size Manifold portg options Four bore sizes with five gripper sizes available both
More informationPARALLEL PNEUMATIC HEAVY DUTY GRIPPER
PARALLEL PNEUMATIC HEAVY DUTY GRIPPER Major Benefits Compact, low profile design provides high grip force and large moment capacities with low overall weight. Ultra-rigid, wear-compensatg jaw guide system
More informationSERIES BCZ2D NOZZLE CYLINDER START-UP AND INFORMATION SHEET
Model Number Definition SERIES BCZD NOZZLE CYLINDER START-UP AND INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with cylinder installation, setup and repair.
More informationMAINTENANCE MANUAL UPE/SPE PART EJECTORS LST/SST PART POSITIONERS
ENGINEERED PRODUCTS ISO 9001 REGISTERED MAINTENANCE MANUAL UPE/SPE PART EJECTORS LST/SST PART POSITIONERS TIP PLATE SIDE PLATE CAM SLOT UPE/SPE WORLD SWITCH (INTEGRATED) WORLD SWITCH (BOX-STYLE) SHROUD
More informationBest Price, Best Design, Best Delivery
Best Price, Best Design, Best Delivery GRM Clamps GRM Clamps Greater clamping Forces, Flexibility, Durability, & low cost Electric Versions Available! Series GRME fixed or spherical mounting brackets for
More informationModular Gripping Products. Modular Gripping Products Introduction
Modular Gripping Products Introduction GR84 Enclosed Modular Mini-Clamp Offers several different jaw and tip options. Can be flange or cylinder mounted. High clamping force and fast opening and closing
More informationClimax Pneumatics. Cnomo NFE Cylinders Easley, South Carolina
Climax Pneumatics Cnomo NFE 49001 Cylinders 1-800-732-8704 Easley, South Carolina End Caps Tube Tie Rods Seals Piston Rod Diecast Aluminum Anodized Aluminum Zinc Coated or Stainless Steel Polyurethane
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationExtruded Thrusters. Brochure
Extruded Thrusters Brochure Chrome plated stainless steel guide shafts optimize bearing performance Mounting flexibility: Through & C-bore Tapped bottom Tapped rear Bottom T-slots Bronze bushing for heavy
More informationClimax Pneumatics Cnomo NFE Cylinders
Climax Pneumatics Cnomo NFE 49001 Cylinders End Caps Tube Tie Rods Seals Piston Rod Diecast Aluminum Anodized Aluminum Zinc Coated or Stainless Steel Polyurethane Chromium Coated Steel Working Pressure
More informationSeries OCG Pneumatic Cylinders
New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING
More informationSST SERIES PART POSITIONER
ISO 9001 REGISTERED SST SERIES PART POSITIONER ONE ACTUATOR TO ETEND AND TIP TOOLING AWAY REPEATABLE RETRACTED POSITION TREATED STEEL TIP PLATE WITH TAPPED HOLES/DOWELS & KEY FOR TOOLING 30 TIP ANGLE BASE
More informationSERIES SFP SLIDES INFORMATION SHEET. Ordering Data. U.S. Patent No. 6,857,780 International Patent No. CA PART NO.
Ordering Data SERIES SFP SLIDES INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationBrochure. Compact Cylinders. Setting a new standard for: Quality Reliability Value Global Compatibility
Brochure Compact Cylinders Setting a new standard for: Quality Reliability Value Global Compatibility Actuators - Compact Cylinders How to Order MODEL MACQ - Compact Cylinder MAGNET Blank - No Magnet S
More informationSTRETCH ROD CYLINDERS for Krones Stretch Blow Molding Machines
PACKAGING COMPONENTS PLASTIC GROUP BCK STRETCH ROD CYLINDERS for Krones Stretch Blow Molding Machines Quality Delivery Support SOLUTIONS A division of PHD Simplified Pneumatic System Easy Maintenance Better
More informationUB2 SERIES GOLD LINE SHOT PIN
ISO 9001 REGISTERED UB2 SERIES GOLD LINE SHOT PIN NO LUBRICATION REQUIRED NPT OR G PORTS INTEGRATED CYLINDER SHROUD SOLID STATE CYLINDER SWITCH OR WORLD SWITCH NAAMS STANDARD MOUNTING RAP OR RIGID COUPLER
More informationSERIES BCS STRETCH ROD CYLINDERS
BCS y Q ua lit Support SOLUTIONS for the Plastic Bottle Blowing Industry DIRECT REPLACEMENT FOR SIDEL SERIES AND SERIES MACHINES P U O C PACK TI A S y er iv el D ENTS GR N O G COM P IN G SERIES BCS STRETCH
More information2000 PG-UG 99-STC-UG. User s Guide
000 PG-UG 99-STC-UG STC PG-38 Series & TRI-LOK PG-45 Locking Oval Power Grippers Clamps User s Guide Warning! Always disconnect air and electrical supply lines before working on or around grippers. Introduction:
More informationpneumatic swing clamps
pneumatic swing clamps Sizing and Application Chart Series Standard Features Bore Clamping Clamping Force [lbf.]n 90 Series [0.86] 22 [0.] 13 [34] 0 Arm rotates at the top of stroke Shielded rod protects
More informationINFORMATION SHEET: SERIES SxL/SxH DESIGN 1 [5] SLIDES
INFORMATION SHEET: SERIES SxL/SxH DESIGN [] SLIDES IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationFor material handling and clamping of small workpieces
For material handling and clamping of small workpieces Power Clamp Cylinder New ø25, ø32 Compact Type INFORMATION 34 mm Lightweight Compact High clamping force Lock function 53 mm Lightweight Weight :
More informationWG Series Double Guided Wedge Grippers
WG Series Grippers www.numatics.com Table of Contents WG Series Parallel Gripper Features & Benefits 3 How To Order 4 WGS50 Dimensions 5 WGS50 Technical Specifications 5 WGL50 & WGS90 Dimensions 6 WGL50
More informationKRONES DIRECT REPLACEMENTS
PLASTIC PACKAGING COMPONENTS GRO Quality Support Delivery SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD PLASTIC PACKAGING COMPONENTS P KRONES DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE
More informationMPE PART EJECTOR MST PART POSITIONER
PART EJECTOR PART POSITIONER ISO 9001 REGISTERED CAM ACTION LIFTS UP TIP PLATE 30mm AND TIPS OUT 30 CAM ACTION ROTATES TIP PLATE 30 THEN CLAMPS DOWN VERTICALLY 25mm NAAMS STANDARD TAPPED/DOWEL HOLES TO
More informationUB4 SERIES GOLD LINE SHOT PIN
ISO 9001 REGISTERED UB4 SERIES GOLD LINE SHOT PIN NPT or G PORTS INTEGRATED CYLINDER INTEGRATED WORLD SWITCH LIGHTWEIGHT ALUMINUM BODY RAP OR RIGID COUPLER CORROSION & WELD SPATTER RESISTANT STEEL RAM.
More informationGuided Slides and Guided Rods
Guided Slides and Guided Rods Guided Slides & Guided Rods: Table of Contents Guided Slides & Guided Rods Guided Slides Product Features...pg 2 Quick Reference...pg 2 How to Order...pg 3 Dimensional Data...pg
More informationUB4 SERIES GOLD LINE SHOT PIN
ISO 9001 REGISTERED UB4 SERIES GOLD LINE SHOT PIN NPT or G PORTS INTEGRATED PNEUMATIC CYLINDER INTEGRATED WORLD SWITCH LIGHTWEIGHT ALUMINUM BODY SHROUD RAP OR RIGID COUPLER CORROSION & WELD SPATTER RESISTANT
More informationClimax Pneumatics. ISO 6432 Interchangeable Cylinders Easley, South Carolina
Climax Pneumatics ISO 6432 Interchangeable Cylinders 1-800-732-8704 Easley, South Carolina End Caps Anodized Aluminum Tube Stainless Steel AISI 304 Piston Seals Rod Bushing Brass ø 8-10 - 12 Polyurethane
More informationUB4 SERIES GOLD LINE SHOT PIN
ISO 9001 REGISTERED UB4 SERIES GOLD LINE SHOT PIN NPT or G PORTS* INTEGRATED PNEUMATIC CYLINDER INTEGRATED WORLD SWITCH* WITH SWITCH GUARD LIGHTWEIGHT ALUMINUM BODY SHROUD* RAP OR RIGID COUPLER* CORROSION
More informationSERIES1 NOZZLE CYLINDER REPAIR PROCEDURES
THE FOLLOWING REPAIR PROCEDURE ENCOMPASSES THESE PHD ML UNITS : - ML309435, ML310142, ML310153, ML310254, ML310295, ML310427, 1) Refer to individual ML exploded view for actual part numbers. 2) Not all
More informationSTRAIGHT FITTING ORIFICE DISK MUFFLER MANIFOLD MOUNTING PLATE MULTI-FUNCTION IMPACT SEAL CYLINDER TUBE 1/4 BSPP ELBOW FITTING HEAD ASSEMBLY
Disassembly OF THE CYLINDER 1) WARNING: All air pressure in the unit must be exhausted prior to disassembly of stretch rod cylinder. 2) Remove valve from manifold (valve not shown). 3) Remove mufflers,
More informationPARALLEL PNEUMATIC MINIATURE GRIPPER
PARALLEL PNEUMATI MINIATURE GRIPPER Major enefits High grip force to weight ratio ompact size Two body styles with a total of four sizes available in both imperial and metric versions Spring assist on
More informationPosition Control Hard chrome-plated carbon steel piston rod with blackened threads and wrench flats Sintered bronze rod bushing Internally lubricated
Position Control System Products Cylinders 7.3-7.9 Cylinder Rod Lock 7.10-7.11 Cylinder Accessories 7.12-7.15 Pneu-Turn 7.16-7.24 Position Control System 7.25-7.36 Digital Panel Meter 7.37-7.42 Electronic
More informationAngular and Parallel Grippers
CAP0551_Grippers_R2.qxp:OEM_TA 2/8/17 2:16 PM Page ii Angular and Parallel Grippers Table of Contents: Grippers Angular Grippers, Parallel Grippers and Options & Accessories Angular Grippers Introduction...
More informationWBG Series Wide Body Grippers
WBG Series Wide Body Grippers www.numatics.com Table of Contents WBG Series Parallel Grippers Features and Benefits 3 How To Order 3 WBGS 60 Dimensions & Technical 4 WBGS 90 Dimensions & Technical 5 WBGL
More informationSERIES SCV SLIDES DESIGN 2/6 INFORMATION SHEET
SERIES SC SLIDES DESIGN / INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationSeries OCG Pneumatic Cylinders
The Price Alternative Series OCG Pneumatic Cylinders Repairable round body cylinders 6 bore sizes 1 standard stroke lengths High speed/double acting www.phdinc.com (8) 624-811 OCG1 ORDERING DATA DESIGN
More informationSERIES GRK PARALLEL GRIPPERS
GRK SERIES GRK PARALLEL GRIPPERS Ideal for Assembly and Robotics Highest Grip Force Its Class Precision Jaw Movement High Moments Highest Grip Force to Height Ratio Precision Jaw Movement Wear Compensatg
More informationMaintenance Instructions & Parts List
PM-PTR/LTR-C Automation Actuator Division Wadsworth, Ohio 448 October 7, 993 Rev. October 999 PTR/LTR Series Actuators Maintenance Instructions & Parts List Provide Model Number and Serial Number When
More informationAngular Motion Gripper Product Overview
2. 1 Angular Motion Gripper Product Overview RUA Series Angular Gripper 2-Jaw Angular Gripper Spring Assist Pneumatic or Hydraulic Operation Preferred Market: l Global Page2.2 DCT/CT Series TM 18 Angular
More informationGR1-15 Series. Sheet Metal Grippers Ordering Information GR1-15 BE DPP - MXX - XXX - XXX
Sheet Metal Grippers Ordering Information GR1-15 BE - 045 - DPP - MXX - XXX - XXX Cylinder Type & Porting Step 1 - Cylinder Type Choose One B B C B E Flange Base Round Cylinder C Jaw Arrangement Options
More information: 660 N. For material handling and clamping of small workpieces. CKZT25 -X2797 (Base Type) Power Clamp Cylinder INFORMATION. ø
For material handling and clamping of small workpieces INFORMATION Power Clamp Cylinder ø25 Compact Type 34 mm Lightweight Compact High clamping force Lock function 53 mm Lightweight Weight : 580 g Compact
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
More informationACRO USER MANUAL MODEL 600 PINCH VALVES INSTALLATION AND OPERATION INFORMATION
ACRO USER MANUAL MODEL 600 PINCH VALVES INSTALLATION AND OPERATION INFORMATION TABLE OF CONTENTS 3 3 4 5 6 6 7 7 8 8 11 Introduction Terms & Abbreviations Product Labeling Product Listing Meet the Products
More informationThe Price Alternative Pneumatic Cylinders and Slides
The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES
More informationDIRECT REPLACEMENTS. phdinc.com (800) INCREASE PRODUCTION REDUCE MAINTENANCE REDUCE DOWNTIME REDUCE SCRAP STRETCHING CYLINDERS
SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD P Quality SIDEL Support Delivery PLASTIC PACKAGING COMPONENTS P ASTIC PACKAGING COMPONENTS GRO DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE
More informationacting, spring return, spring extend and double rod models. Hall Effect sensors and magnetic piston versions are also available.
AIR FORCE ONE COMPACT CYLINDER Clippard Instrument Laboratory, Inc. Air Force One compact cylinders are available in double acting, spring return, spring extend and double rod models. Hall Effect sensors
More informationCD34CNFLFxxx. Capacitive sensor, Foreground Suppression. Main features. Main functions. Description
Capacitive sensor, Foreground Suppression Main features Compact housing Supply voltage: 10 to 30 VDC Output: 100 ma, NPN or PNP preset Make or break switching function LED indication for output and power
More informationElectric Slide Solutions
Electric Slide Solutions Series ESCV Electric Thruster Slide Designed for vertical or non-rotating applications Built on the field proven Series SCV, the electric version offers many of the same benefits
More informationTPCA Power Clamps Catalog
TPCA Power Clamps Catalog Pneumatically Operated, Weld-Contamination Sealed, Heavy Duty Power Clamps > Degree of arm opening can be adjusted from -12 > One clamp for both dual or single arms > Uses TRILOK
More informationOptimized for OEM requirements at a lower price.
The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO
More informationPGS Gripper Double Blank Sensors
User Instructions Double Blank Sensor Kit Micro Catalog # Pico Catalog # Description SGS40040-K SGS40040P4-K NPN SGS40041-K SGS40041P4-K PNP Note: Whenever any part of the gripper is replaced including
More informationLinear Slides Pneumatic
Linear Slides Pneumatic Mini DLM Modular Series DLM Series No Adaptor Plates Required! DLM-07M-50-50-P mini linear slide. Shown smaller than actual size. Highly Configurable Modular Automation Exclusive
More informationMAINTENANCE MANUAL MPE PART EJECTOR MST PART POSITIONER
ENGINEERED PRODUCTS ISO 9001 REGISTERED MAINTENANCE MANUAL MPE PART EJECTOR MST PART POSITIONER WORLD SWITCH MPE MST STANDARD SHROUD PNEUMATIC CYLINDER SOLID STATE CYLINDER SWITCH SHEET 1 REV 4/29/2016
More informationPIN CLAMP MAINTENANCE MANUAL PCS, PCT, PCM
ENGINEERED PRODUCTS ISO 9001 REGISTERED PIN CLAMP MAINTENANCE MANUAL PCS, PCT, PCM STANDARD BULLET NOSE PIN PNEUMATIC NPT or G PORTS STANDARD LOW PROFILE PIN STANDARD STEEL PART BACKUP SOLID STATE CYLINDER
More informationSeries OCQ Pneumatic Compact Cylinders
The Price Alternative Series OCQ Pneumatic Compact Cylinders Ten bore sizes available in incremental stroke lengths Standard shock pads reduce end of travel impact Standard magnets for switch sensing capability
More informationUnique CORROSION RESISTANT PLASTIC SLIDE UNIT FEATURES. Major Benefits. Industry Uses
Unique CORROSION RESISTANT PLASTIC SLIDE Model# ML305733 PLASTIC SLIDE PET GRIPPERS UNIT FEATURES Bore Size: Stroke: Body: Tool Plate: Guide Shafts: Retaining Rings: Fasteners: 2X 32 mm DIA 2.000 +.080/-.000
More informationAS-Interface Installation Manual. ASAHI / AMERICA, Inc. Thermoplastic Valves and Piping Systems
AS-Interface Installation Manual Page 1 of 9 Rev A April 16, 2003 ASAHI / AMERICA, Inc. Thermoplastic Valves and Piping Systems 35 GREEN STREET PO BOX 653 MALDEN, MA. 02148 AS-Interface Installation Manual
More informationTable of Contents ISO
Table of Contents ISO 6432...3-12 Features and Benefits...3 How to Order....4 Dimensions Single Rod End, Single and Double Acting...5 Single and Double Acting-Double Rod...6 Mounting Accessories...7-10
More informationSSI. Synchronous Serial Interface
T E M P O S O N I C S R S E R I E S SSI Synchronous Serial Interface P r o d u c t S p e c i f i c a t i o n s PARAMETER Measured Variable: Resolution: Non-Linearity: SPECIFICATION Displacement Up to 0.002
More informationEQ Series OEM Aluminum NFPA Interchangeable Cylinder Line
Series OEM Aluminum NFPA Interchangeable Cylinder Line www.numatics.com Table of Contents EQ Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Rod Ends 6 Dimensions 7 How to Order - EQ Series
More informationSMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8, /2, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More informationCONTROLS. Bray Pneumatic Actuators & Accessories. Technical Manual. A Division of BRAY INTERNATIONAL, Inc.
CONTROLS A Division of BRAY INTERNATIONAL, Inc. Bray Pneumatic Actuators & Accessories Technical Manual TM-056 Pneumatic Actuator - 08//00 Bray Pneumatic Actuators & Accessories Technical Manual - Table
More informationTable of Contents. ISO/VDMA Series
Table of Contents ISO/VDMA Series...3-22 Features and Benefits... 3 How to Order.... Technical Information... 5 Dimensions Profile Version...6-7 Tie-Rod Version...8-9 Mounting Parts...-16 Switches... 17
More informationPPC PRODUCTS PARTS LISTS CATALOG 2013
PLASTIC PACKAGING COMPONENTS GROUP PPC PRODUCTS PARTS LISTS CATALOG 0 Quality Delivery Support SOLUTIONS A division of PHD PPCPARTS INDEX Page FACTORY REBUILD PROGRAM Using H Codes... Cylinders STRETCH
More informationSMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8,, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More informationBest Price Best Design Best Delivery SERIES GRM. Workholding Clamps. Sizes 1, 2, & 4 GRM124B
Best Price Best Design Best Delivery SERIES GRM Workholding Clamps Sizes 1, 2, & 4 PHD Series GRM Clamps Workholding Clamps The Series GRM Clamp continues to be the industryleading pneumatic actuator of
More informationBulletin 871P Can Sensors
Bulletin 871P Can Sensors Description Bulletin 871P inductive proximity can sensors are self-contained solid state devices, designed specifically for sensing size 202 to 704 metal cans without physical
More informationMGX. 2-jaw parallel self-centering pneumatic gripper series MGX. Parallel grippers. Pinze parallele MGX
Pinze parallele MGX Parallel grippers MGX 2-jaw parallel self-centering pneumatic gripper series MGX Flat profile. Robust guide. High gripping force. Small weight and dimensions. High dimensional accuracy.
More informationPNEUMATIC ROTARY ACTUATORS
Bulletin FRA.C-09 Prices effective September 1, 2011 PNEUMATIC ROTARY ACTUATORS FRA & FRC Series FRA Series Features 1. Magnetic pistons are standard on all models. 2. Compact design saves space. 3. Rectangular
More informationRobotic End Effectors
Robotic End Effectors QC Robot Tool Changer Heady duty, spring loaded locking mechanism prevents separation in the event of loss of air pressure Support for optional pneumatic, fluid or electrical interface
More informationTurn-Dex Rotary Vane Actuators
Turn-Dex Rotary Vane Actuators Turn-Dex: Table of Contents Turn-Dex Turn-Dex 1-1/4 Bore pg. 2 How to Order pg. Dimensional Data pg. 4 Turn-Dex 2-1/2 Bore pg. 5 How to Order pg. 6 Dimensional Data pg. 7
More informationTable of Contents FE Series Features and Benefits
Table of Contents FE Series.................................................................................... -6 Features and Benefits..................................................................................
More informationINTEGRATED HYDRAULIC BRAKE ACTUATORS
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit
More information300 & 400 Series Positioning Tables
300 & 400 Series Positioning Tables 300 Series Introduction L-2 400 Series Introduction L-3 Specifications L-5 300 Series Dimensions L-6 400 Series Dimensions L-7 300 Series Motor Couplings L-8 300 Series
More information