TECHNICAL BID. T 4329 (E-Tender I.D. No. ) Subject: Supply of Various Measuring Instruments for TMD-6 of 500 MW Unit No.6 of GSECL Ukai TPS.

Transcription

1 GUJARAT STATE ELECTRICITY CORPORATION LIMITED Ukai Dam, Taluka: Fort Songadh, Dist:Tapi Ph , Fax: , Website: CIN: U40100GJ1993SGC TECHNICAL BID T 4329 (E-Tender I.D. No. ) Subject: Supply of Various Measuring Instruments for TMD-6 of 500 MW Unit No.6 of GSECL Ukai TPS. Due on Date : At 3.30 P.M. (if Possible) EMD paid YES / NO EMD D. D. No. Date : OR SSI / NSIC Certification Number: Duly Notarized : YES / NO Notes: (1) The party has to submit latest and valid DIC/SSI and subsequent NSIC/CSPO/DGS&D Certificate. Photocopy of DIC/SSI and subsequent NSIC/CSPO/DGS&D Certificate is not acceptable. It must be duly notarized. It should not be more than 3 years old. No exemption as well as relaxation i.e. tender fee, Earnest Money deposit (EMD) & Security deposit (S.D) shall be given to outside Gujarat base parties. (2) Tenders submitted without Tender Fee and Earnest Money Deposit (E.M.D.) will not be accepted. T Page 1 of 15

2 GUJARAT STATE ELECTRICITY CORPORATION LIMITED Ukai Dam, Taluka: Fort Songadh, Dist:Tapi Ph , Fax: , Website: CIN: U40100GJ1993SGC T 4329 Tender for: Supply of Various Measuring Instruments for TMD-6 of 500 MW Unit No.6 of GSECL Ukai TPS. Sr. No. Index Page No. 1. Tender Notice 2. Undertaking (To be signed by the Tenderer) 3. Detail Specifications (Technical Bid) 4. Tender & Contract for works (Booklet) 5. Drawing Number 6. Schedule 'B' (Price Bid) Issued to Demand Draft No. for Tender Fee: & Date: Demand Draft No. for Earnest Money Deposit : & Date: IMPORTANT NOTE : This tender should be submitted duly signed without removing a single page. Otherwise the tender is liable to be rejected. For SUPPLY TENDER, TIN / PAN Number should be invariable mentioned in their technical bid otherwise your offer will be ignored and price bid will not be opened. T Page 2 of 15

3 Gujarat State Electricity Corporation Limited Ukai Thermal Power Station THERMAL POWER STATION, UKAI DAM, DIST - TAPI TECHNICAL BID Reference No. : T 4329 Subject : Supply of Various Measuring Instruments for TMD-6 of 500 MW Unit No.6 of GSECL Ukai TPS. Sr. No. Description of Material 1 DIAL INDICATOR PLUNGER TYPE WITH BACK LUG SUITABLE FOR MAGNETIC BASE, HEIGHT GAUGE ETC. GRADUATION: 0.01 MM, RANGE: 10MM, DIAL READING: 0-100, ACCURACY: MM. 2 DIAL INDICATOR PLUNGER TYPE WITH BACK LUG SUITABLE FOR MAGNETIC BASE, HEIGHT GAUGE ETC. GRADUATION: 0.01 MM, RANGE: 0 MM - 5 MM, DIAL READING: 0-100, ACCURACY: MM. 3 DIGIMATIC DIAL INDICATOR WITH 6 DIGIT DIGITAL LCD DISPLAY AND BACK LUG SUITABLE FOR MAGNATIC BASE, HEIGHT GUAGE, ETC., RESOLUTION: 0.01MM, RANGE: 12.7MM 4 FEELLER GAUGE STRIP, SIZE : 0.03MM THICK X 12.7MM WIDTH X 5 FEELLER GAUGE STRIP, SIZE: 0.04MM THICK x 12.7MM WIDTH x 6 FEELLER GAUGE STRIP, SIZE : 0.05MM THICK X 12.7MM WIDTH X 7 FEELLER GAUGE STRIP, SIZE: 0.06MM THICK x 12.7MM WIDTH x 8 FEELLER GAUGE STRIP, SIZE: 0.07MM THICK x 12.7MM WIDTH x 9 FEELLER GAUGE STRIP, SIZE: 0.08MM THICK x 12.7MM WIDTH x 10 FEELLER GAUGE STRIP, SIZE : 0.10MM THICK X 12.7MM WIDTH X 11 FEELLER GAUGE STRIP, SIZE : 0.15MM THICK X 12.7MM WIDTH X 12 FEELLER GAUGE STRIP, SIZE : 0.20MM THICK X 12.7MM WIDTH X 13 FEELLER GAUGE STRIP, SIZE : 0.25MM THICK X 12.7MM WIDTH X 14 FEELER GAUGE: MM, LENGTH (Long leaf). 28 leaves: mm by 0.01mm, 0.2-1mm by 0.05mm 15 FEELER GAUGE HAVING SIZE 1/2" X 12" AND SET OF 20 BLADES IN INCREASING SIZE OF 0.05 MM THICKNESS FROM 0.05 MM TO 1 MM 16 DIGIMATIC OUTSIDE MICROMETER COMPLETE WITH DIGITAL DISPLAY AND INTERCHANGEABLE ANVIL 0, 25, 50,75, 100,125 MM. IN ORIGINAL CARRYING CASE. SIZE : MM, RESOLUTION: 0.001MM. 17 DIGIMATIC OUTSIDE MICROMETER COMPLETE WITH DIGITAL DISPLAY AND INTERCHANGEABLE ANVIL 0, 25, 50,75 MM. IN ORIGINAL CARRYING CASE. SIZE : MM, RESOLUTION: 0.001MM. Qty. Required T Page 3 of 15 Unit 6 Number 6 Number 4 Number 2 Number 2 Set 1 Number 1 Number

4 18 DIGIMATIC OUTSIDE MICROMETER COMPLETE WITH 1 Number DIGITAL DISPLAY AND INTERCHANGEABLE ANVIL 0, 25, 50,75 MM. IN ORIGINAL CARRYING CASE. SIZE : MM, RESOLUTION: 0.001MM. 19 DIGIMATIC OUTSIDE MICROMETER COMPLETE WITH 1 Number DIGITAL DISPLAY AND INTERCHANGEABLE ANVIL 0, 25, 50,75 MM. IN ORIGINAL CARRYING CASE. SIZE : MM, RESOLUTION: 0.001MM. 20 DIGIMATIC OUTSIDE MICROMETER COMPLETE WITH 1 Number DIGITAL DISPLAY AND INTERCHANGEABLE ANVIL 0, 25, 50,75 MM. IN ORIGINAL CARRYING CASE. SIZE : MM, RESOLUTION: 0.001MM. 21 DIAL VERNIER CALIPER : SIZE : 300MM (L.C : 2 Number 0.02MM/0.001")SUITABLE TO TAKE INSIDE,OUTSIDE, DEPTH AND STEP PRECISION MEASUREMENTS. DUAL READING SCALE(METRIC AND INCH). MFG. FROM HARDENED SS AND SATIN FINISH. 22 MAGNETIC STAND, MODEL: Number 23 UNIVERSAL TYPE MAGNETIC STAND, MODEL: Number 24 UNIVERSAL TYPE MAGNETIC STAND, MODEL:7033B 2 Number 25 MAGNETIC STAND WITH FLEXIBLE COLUMN, 3 Number MODEL: METRIC RECTANGULAR GUAGE BLOCK SET OF STEEL 1 Set 1MM BASE BLOCK SET. TYPE: STEEL 112-BLOCK SET 27 PRECISION LEVEL, MODEL: Number 28 PRECISION LEVEL, MODEL: Number While filling-up various taxes through On-line Price Bid, the party has to mention The tax in Rupees instead of percentage. Note to Supplier: 1. Make, Model No. and other technical specifications mentioned in attached sheet ''Technical specification'' for Item sr. no. 1 to 3, 14, & 16 to 28 are as per ''MITUTOYO'' catalogue. However, party shall have to offer MITUTOYO / BAKER / OCEAN makes for Item sr. no. 1 to 3, 14, & 16 to 28 & equivalent to model no. mentioned in ''Technical specification''. 2. Party shall have to supply Items under sr. no. 1 to 3, 14, & 16 to 28 are of MITUTOYO / BAKER / OCEAN makes only. 3. Party shall have to specify "Make" & "Model No" of offered items in Technical Bid otherwise offer will be rejected. 4. Party must submit Technical Literature showing all "Dimensions, Specifications and Model No" along with Technical Bid for which they have offered their rates. Offer without Technical Literature shall liable to be ignored. 5. Party should supply the materials along with all the standard accessories as mentioned in the Technical Specification and should quote the rates accordingly. 6. Party shall have to supply all the items in standard packing and original carrying case. 7. For all requisition items, party shall have to furnish the Guarantee for a period of 18 months from the date of receipt of material or 12 months from the date of commissioning whichever is earlier against any manufacturing defect or workmanship. 8. For items Sr. No. 1 to 3, 14, & 16 to 28: Supplied measuring instruments the make should T Page 4 of 15

5 be CLEARLY INDICATIVE ON THE INSTRUMENTS. For Items except Sr. No. 1 to 3, 14, & 16 to 28 Supplied measuring instruments the make should be as mentioned in technical specifications only. 9. Party shall have to submit OEM / Authorized Dealership / Authorized Distributorship certificate along with the Technical Bid. In case party shall not be OEM / Authorized Dealership / Authorized Distributorship, they will have to submit the purchase proof confirming that material is purchased from OEM / Authorized Dealership / Authorized Distributorship only. Party shall have to submit proof of the same along with offer/supply. 10. Party shall have to submit past executed PO copies / experience certificate etc. for these items to GSECL, NTPC or other SEB's along with Technical Bid. 11. Party shall have to submit the manufacturer's Calibration certificate along with all supplied measuring instruments except items at Sr. No. 22, 23, 24 & 25 and should quote the rates accordingly. 12. For Item Sr. No. 6, 10, 11, 12 & 13: Consider UOM are Number instead of Set. TECHNICAL SPECIFICATIONS: 1) Item Sr. No 1: DIAL INDICATOR PLUNGER TYPE RANGE: 0 mm - 10 mm - Model/ Make: 2046S-09, Mitutoyo Japan make. - Graduation: 0.01 mm - Range: 0 mm - 10 mm - Dial Reading: Accuracy: mm - Dial Dia: 57 mm - Features: Shock Proof & Continuous Scale, Dial for zero setting with back lug suitable for Magnetic Base, Height Gauge etc. - To be supplied in Original carrying case. 2) Item Sr. No 2 : DIAL INDICATOR PLUNGER TYPE RANGE: 0 mm - 5 mm - Model/ Make: 2044S-09, Mitutoyo Japan make. - Graduation: 0.01 mm - Range: 0 mm - 5 mm - Dial Reading: Accuracy: mm - Dial Dia: 57 mm - Features: Shock Proof & Continuous Scale, Dial for zero setting with back lug suitable for Magnetic Base, Height Gauge etc. - To be supplied in Original carrying case. 3) Item Sr. No 3 : DIGIMATIC INDICATOR PLUNGER TYPE RANGE: 0 mm 12.7 mm - Model/ Make: , Mitutoyo Japan make. - Resolution: 0.01 mm - Range: 0 mm 12.7 mm - Accuracy: 0.02 mm - Dial Dia: 59 mm - Display: 6-digit LCD and sign - Features: Preset, Zero set, Power ON/OFF and with back lug suitable for Magnetic Base, Height Gauge etc. - To be supplied in Original carrying case. 4) Item Sr. No 4 to 13: FEELLER GAUGE STRIP, SIZE: 12.7MM WIDTH X Thickness: 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.10, 0.15, 0.20 & 0.25 mm - MAKE: MEKASTER / SNAPON / GADORE / GLOBE / INDIAN/ any standard make. However party shall have to specify the offered make. - Should be quality industrial with hardened & polished taper blades. Blades should be clearly marked for easy identification. - Each piece marked with thickness & individual envelope, with convenient 5 mm (3/16") hole punched in the end for hanging. T Page 5 of 15

6 - Length & width of each feeler gauge strip should be 300mm & 12.7mm respectively. - Rounded ends- no ragged edges. - To be supplied in standard packing. 5) Item Sr. No: 14: FEELER GAUGE: MM, (Long leaf) 28 leaves. - Model/ Make: S, Mitutoyo Japan make. - Size: mm set of 11 leaves in increasing size of 0.01 and 0.20 to 1 mm set of 17 blades in increasing size of 0.05 (17 leaves) i.e. Total 28 Leaves. - Total Set of 28 leaves consisting number (11 leaves), (17 leaves). - Metric thickness gauges with tapered leaves. - Should be quality industrial with hardened & polished taper blades, enclosed in a steel case. Blades should be clearly marked for easy identification. - Each leaf marked with its thickness. - Each leaf should be detachable if necessary. - To be Supplied in standard packing. 6) Item Sr. No: 15: FEELER GAUGE: MM, (Long leaf) 20 leaves - MAKE: MEKASTER / SNAPON / GADORE / GLOBE / INDIAN/ any standard make. However party shall have to specify the offered make. - Metric thickness gauges with tapered leaves. - Should be quality industrial with hardened & polished taper blades, enclosed in a steel case. Blades should be clearly marked for easy identification. - Size: 0.05 to 1 mm, set of 20 blades in increasing size of 0.05 mm thickness from 0.05 mm to 1 mm - Length & width of each feeler gauge strip should be 12 /300mm & ½ respectively. - Should be quality industrial with hardened & polished taper blades, enclosed in a steel case. Blades should be clearly marked for easy identification. - Each leaf marked with its thickness. - Each leaf should be detachable if necessary. - To be supplied in standard packing. 7) For Item Sr. no. 16: OUTSIDE MICROMETER Complete with Interchangeable Anvil - Model/ Make: , Mitutoyo Japan make. - Type: Digimatic LCD Type - SIZE: mm - Graduation: mm - Wide measuring range with interchangeable anvils. - Carbide tip measuring faces. - Provided with a ratchet stop for constant force. - Supplied with zero setting std. for each range. 8) For Item Sr. no. 17: OUTSIDE MICROMETER Complete with Interchangeable Anvil - Model/ Make: , Mitutoyo Japan make. - Type: Digimatic LCD Type - SIZE: mm - Graduation: mm - Wide measuring range with interchangeable anvils. - Carbide tip measuring faces. - Provided with a ratchet stop for constant force. - Supplied with zero setting std. for each range. 9) For Item Sr. no. 18: OUTSIDE MICROMETER Complete with Interchangeable Anvil - Model/ Make: , Mitutoyo Japan make. - Type: Digimatic LCD Type - SIZE: mm - Graduation: mm - Wide measuring range with interchangeable anvils. - Carbide tip measuring faces. - Provided with a ratchet stop for constant force. T Page 6 of 15

7 - Supplied with zero setting std. for each range. 10) For Item Sr. no. 19: OUTSIDE MICROMETER Complete with Interchangeable Anvil - Model/ Make: , Mitutoyo Japan make. - Type: Digimatic LCD Type - SIZE: mm - Graduation: mm - Wide measuring range with interchangeable anvils. - Carbide tip measuring faces. - Provided with a ratchet stop for constant force. - Supplied with zero setting std. for each range. 11) For Item Sr. no. 20: OUTSIDE MICROMETER Complete with Interchangeable Anvil - Model/ Make: , Mitutoyo Japan make. - Type: Digimatic LCD Type - SIZE: mm - Graduation: mm - Wide measuring range with interchangeable anvils. - Carbide tip measuring faces. - Provided with a ratchet stop for constant force. - Supplied with zero setting std. for each range. 12) For Item Sr. no. 21: Dial Vernier Caliper with fine adjustment - Model/ Make: , Mitutoyo Japan make. - Range: mm. - Graduation: 0.02 mm, 2mm/rev - With Depth Bar & Suitable For ID/ OD/ Depth/ Step Measurements - Body: Stainless steel hardened throughout with measuring faces precision ground and micro lapped for ultimate accuracy. - Scale surface: satin-chrome finished with clear and crisp engraved graduations Raised sliding surface prevents defacement and wear of graduations: clear black engravings. 13) For Item Sr.no.22: Magnetic Stand - Model/Make: , Mitutoyo Japan Make. - Complete with clamping stand, four magnetic faces, this stand accepts all Dial Indicators & Dial test Indicators and provided with fine adjustment. - Provided with the ON/OFF Switch offers in stand mounting & Dismounting without any adverse effect to the indicators or work surface - Applicable holding stem dia. : 4 mm, 8 mm, 9.53 mm - Base Dimensions: 50mm (w)x 58mm(D) x 55mm(H). - Column Dimensions: 177mm x 12mm dia, - Cross Bar Dimensions: 150mm x 10mm dia. - To be supplied in standard packing. 14) For Item Sr.no.23: Universal Magnetic Stand, - Model/Make: 7031, Mitutoyo Japan Make. - Complete with clamping stand, four magnetic faces, this stand accepts all Dial Indicators & Dial test Indicators and provided mechanical locking system. - Provided with the dovetail groove and with ON/OFF Switch offers in stand mounting & Dismounting without any adverse effect to the indicators or work surface - Applicable holding stem dia. : 6 mm, 8 mm - Base Dimensions: 30.4mm (w)x 35.7mm(D) x 43mm(H). - To be supplied in standard packing. 15) For Item Sr. No. 24: Universal Magnetic Stand - Model/Make: 7033B, Mitutoyo Japan Make. - Complete with clamping stand, four magnetic faces, this stand accepts all Dial Indicators T Page 7 of 15

8 & Dial test Indicators and provided mechanical locking system. - Provided with the dovetail groove and with ON/OFF Switch offers in stand mounting & Dismounting without any adverse effect to the indicators or work surface - Applicable holding stem dia. : 6 mm, 8 mm, 9.53 mm - Base Dimensions: 50mm (w)x 55mm(H). - To be supplied in standard packing. 16) For Item Sr. No. 25: Magnetic Stand with Flexible Column - Model/Make: , Mitutoyo Japan Make. - Complete with clamping stand, four magnetic faces, this stand accepts all Dial Indicators & Dial test Indicators. - Provided with the dovetail groove and with ON/OFF Switch offers in stand Mounting & Dismounting without any adverse effect to the indicators or work surface - Applicable holding stem dia. : 6 mm, 8 mm, 9.53 mm - Base Dimensions: 50mm (w)x 58mm(D)x 55mm(H). - To be supplied in standard packing. 17) For Item Sr. no. 26: GAUGE BLOCK, (Block per set is 112 blocks) - Model/ Make: STEEL 112-BLOCK SET, Mitutoyo Japan make. - Type: 1 mm base block Set of STEEL - SIZE: to 100 mm, mm of 1 block, mm of 9 blocks in increasing size of 0.001, mm of 49 blocks in increasing size of 0.01, mm of 49 blocks in increasing size of 0.5, mm of 4 blocks in increasing size of 25, i.e., Total 112 blocks. - Total nos. of 112 blocks consisting number (1 block), (9 blocks), (49 blocks), (49 blocks), (4 blocks). - Graduation: mm - Provided with clearly marked sizes. - A Calibration Certificate of Inspection is furnished with all Mitutoyo gauge blocks with a serial number on the box (in the case of sets) and an identification number on each block. The deviation of each block from nominal length, at the time of inspection, is stated. 18) For Item Sr. No. 27: PRECISION LEVEL - Model/Make: , Mitutoyo Japan make only - Sensitivity : 0.02mm/m, Dimension: 200mm (w) X 44mm(D) X38.2mm(H), - Accuracy of graduations: ±0.7 DIV - Having High-precision longitudinal and transverse vials make possible to check or level surfaces. 19) For Item Sr. No. 28: PRECISION LEVEL - Model/Make: , Mitutoyo Japan make only - Sensitivity : 0.02mm/m, Dimension: 200mm (w) X 44mm(D) X200mm(H), - Accuracy of graduations: ±0.3 DIV - Having High-precision longitudinal and transverse vials make possible to check or level surfaces. - To be supplied in original carrying case T Page 8 of 15

9 Special Notes: (1) It is mandatory for all bidders to submit their tender documents by both forms viz. online (e-tendering) and physically in schedule time. I f t ender documents submitted in only any one form, say either by on-line or physically, in that case the same tender will not be considered. Further bidders are requested to submit Price bid (Schedule-B) online only and not to submit the Price bid in Physical form. This is mandatory. If price bid is submitted in physical form, the same will not be opened and only on-line submitted Price bid will be considered for evaluation. Further, if the quantity quoted differs in the any of the technical bid forms and in price bid forms, it is at the discretion of CE Committee / ED Committee - GSECL to consider the quoted quantity. (2) Please submit photocopy of Schedule-B duly signed by you, along with TECHNICAL BID, without stating prices. (3) Tender shall not be opened without payment of EMD & Tender Fee. Please furnish details of EMD & Tender Fee paid on cover. (4) If any deviation in your offer with respect to Tender specification, then please mention clearly in separate deviation sheet, otherwise we will consider your offer is exactly as per our Enquiry / Tender specification. (5) GSECL reserves rights to place the order on technically qualified bidders for item wise / individual lowest quoted party. (6) Repeat Order: GSECL reserves right for the placement of repeat 50 % of the order quantity / value within 4 (Four) months of the order as per the Clause No. 24 of Commercial Terms and Conditions instead of 25 %. Other condition of Clause No. 24 remains same. (7) It is to be noted that GSECL, Ukai TPS is establishing and implementing occupational Health & Safety Management System complying with OHSAS 18001:2007. You as a part of the GSECL Ukai team and as defined by the scope of mentioned standard, all contractors are required to comply with and participate to prevent the occupational Health and Safety hazards and risks including observation of safety rules. Further you are also to comply with all applicable legal requirements while executing the supply / work, in case the job is assigned to you. (8) Party has to accept Payment Term as per GSECL s standard terms & conditions: Payment shall be made by the GSECL for the material supplied at 80 % plus 100 % taxes against T.R.C. within 30 days and balance 20 % against S. R. Note within 45 days from the date of receipt of material at our site. (9) Delivery Period: ( i )Sample Submission for approval : N.A. ( ii ) Bulk Supply : Within 03 to 04 Months (10) While filling-up various taxes through On-line Price Bid, the party has to mention the tax in Rupees instead of percentage. (11) Tender Fee / Earnest Money Deposit (E.M.D.) / Security Deposit (S.D.) will be accepted by Demand Draft / RTGS / NEFT also, and copy of the same is required to be attached with technical bid invariably. The bank details are as under, Beneficiary Name : M/s. Gujarat State Electricity Corporation Ltd. Address : Urja Nagar, GEB Colony, Taluka : Songadh. Dist. : Tapi., Pin Code Bank Name : Bank of Baroda Ukai. Nature of A/C : Current Accounts., Branch : Ukai. Account No. : IFSC CODE No. : BARB0UKAIXX ( 0 = ZERO) MICR CODE No. : After net banking transaction, please inform to our Account Section regarding payment details along with tender number on their id of ukaisa6.gsecl@gebmail.com and ukaiao.gsecl@gebmail.com Contractor's Signature With date and seal RFQ No. : CHIEF ENGINEER (GEN.) GSECL, Ukai TPS. T Page 9 of 15

10 IMPORTANT: All the bidders are requested to read and verify the documents of Commercial Terms & Condition of Tender & Supply (i.e. Clause No.1 to 83) of GSECL, UKAI, TPS and confirm that all the above documents are verified & certify by you as below. I / we read the above documents and agree for the Conditions of Tender & Supply (i.e. Clause No.1 to 83) of GSECL, UKAI, TPS and accordingly submitted my / our offer. (1) For Page No. 1 to 21 of terms & condition: Party can give acceptance of clause No.1 to 83 on a single paper instead of all 21 pages. (2) For Page No. 25 to 37 : Please note that you have to furnish the details in all Annexure-1 to 13, Certificate-A & Integrity Pact i.e. dully fill, stamped and signed otherwise your offer is likely to be ignored out rightly. (3) In case of Ex-works Prices, you have to mention item wise Pkg. & Fwd., Freight, insurance charges in Annexure-10 otherwise it will be considered as per GSECL procedure for evaluation. (4) Clause No. 12 of Commercial Terms & Condition at Page No.6 of 46: Kindly read clause No. 12 i.e. Security Deposit of Commercial terms & Condition as below. SECURITY DEPOSIT : The successful Tenderer s will be required to pay an amount equivalent to 10 % of the value of the Order (End Cost) against letter of intent as per GOG guideline as a Security Deposit for satisfactory execution of the contract. Such security deposit will be payable either in D.D./Bank Guarantees. Bank Guarantees will be acceptable if issued by Bank of Baroda and State Bank of India. The Bank Guarantees will be executed on the standard form prescribed by the GSECL. In case of the Bank Guarantees furnished / submitted, they should have clear one time validity till the completion of the order in all respects and up to the expiry of guarantee period from the date of receipt of the last consignment. Bank Guarantees for interim period will not be allowed. If by any reasons the supply period is extended then supplier should undertake to renew the Bank Guarantee at least 01 Month before the expiry of the validity failing which GSECL will be at liberty to encash the same. CORPORATE BANK GUARANTEES NOT ALLOWED. If S.D. Exemption is claimed against NSIC Certificate, then the NSIC Certificate / Competency Certificate more than 03 years old will not be considered. If the validity of the certificate expires prior to completion of the order, then it has to be got revalidated from NSIC by the Tenderer and submitted immediately; otherwise bidder shall have to arrange for payment of Security Deposit. S.D. should be paid within 07 (Seven) days after receipt of the LOI. Security Deposit is to be 6 % of the Order End Cost for Small, Cottage & tiny industrial unit of Gujarat State registered under Small Scale industries of Gujarat State and holding subsequent registration with CSPO / NSIC / DGS&D Registration Certificates for the item under tender. (Applicable Only of Gujarat base Parties) R.F.Q. No. : Contractor's Signature With date and seal T Page 10 of 15

11 GUJARAT STATE ELECTRICITY CORPORATION RATION LIMITED Ukai Dam, Taluka: Fort Songadh, Dist: Tapi Ph , Fax: , Website: CIN: U40100GJ1993SGC PRICE BID T 4329 (E-Tender I.D. No. ) Subject: Supply of Various Measuring Instruments for TMD-6 of 500 MW Unit No.6 of GSECL Ukai TPS. Please submit price bid duly signed and stamp (without stating above / below rates) along with Technical Bid. T Page 11 of 15

12 GUJARAT STATE ELECTRICITY CORPORATION LIMITED Ukai Dam, Taluka: Fort Songadh, Dist:Tapi Ph , Fax: , Website: CIN: U40100GJ1993SGC SCHEDULE - B (Price Bid) Description : Supply of Various Measuring Instruments for TMD-6 of 500 MW Unit No.6 of GSECL Ukai TPS. Reference No. : T 4329 (E-Tender I.D. No. ) Urja RFQ No. : Sr. No. Description of materials with details of Specifications 1 DIAL INDICATOR PLUNGER TYPE WITH BACK LUG SUITABLE FOR MAGNETIC BASE, HEIGHT GAUGE ETC. GRADUATION: 0.01 MM, RANGE: 10MM, DIAL READING: 0-100, ACCURACY: MM. 2 DIAL INDICATOR PLUNGER TYPE WITH BACK LUG SUITABLE FOR MAGNETIC BASE, HEIGHT GAUGE ETC. GRADUATION: 0.01 MM, RANGE: 0 MM - 5 MM, DIAL READING: 0-100, ACCURACY: MM. 3 DIGIMATIC DIAL INDICATOR WITH 6 DIGIT DIGITAL LCD DISPLAY AND BACK LUG SUITABLE FOR MAGNATIC BASE, HEIGHT GUAGE, ETC., RESOLUTION: 0.01MM, RANGE: 12.7MM 4 FEELLER GAUGE STRIP, SIZE : 0.03MM THICK X 12.7MM WIDTH X Quantity Required UOM 6 Number 6 Number 4 Number Quantit y Offered by Tendere r Unit Ex- Works In Rs. T Page 12 of 15 Pkg. & Fwd. Charges per Unit in Rs. Excise Duty per unit in Rs. Sales Tax per unit in Rs. Insurance Charges per unit in Rs. Freight Charge s per unit in Rs. Unit End Cost Price in Rs. Total End Cost Price in Rs.

13 5 FEELLER GAUGE STRIP, SIZE: 0.04MM THICK x 12.7MM WIDTH x 6 FEELLER GAUGE STRIP, SIZE : 0.05MM THICK X 12.7MM WIDTH X 7 FEELLER GAUGE STRIP, SIZE: 0.06MM THICK x 12.7MM WIDTH x 8 FEELLER GAUGE STRIP, SIZE: 0.07MM THICK x 12.7MM WIDTH x 9 FEELLER GAUGE STRIP, SIZE: 0.08MM THICK x 12.7MM WIDTH x 10 FEELLER GAUGE STRIP, SIZE : 0.10MM THICK X 12.7MM WIDTH X 11 FEELLER GAUGE STRIP, SIZE : 0.15MM THICK X 12.7MM WIDTH X 12 FEELLER GAUGE STRIP, SIZE : 0.20MM THICK X 12.7MM WIDTH X 13 FEELLER GAUGE STRIP, SIZE : 0.25MM THICK X 12.7MM WIDTH X 14 FEELER GAUGE: MM, LENGTH (Long leaf). 28 leaves: mm by 0.01mm, 0.2-1mm by 0.05mm 15 FEELER GAUGE HAVING SIZE 1/2" X 12" AND SET OF 20 BLADES IN INCREASING SIZE OF 0.05 MM THICKNESS FROM 0.05 MM TO 1 MM 2 Number 2 Set T Page 13 of 15

14 16 DIGIMATIC OUTSIDE MICROMETER COMPLETE WITH DIGITAL DISPLAY AND INTERCHANGEABLE ANVIL 0, 25, 50,75, 100,125 MM. IN ORIGINAL CARRYING CASE. SIZE : MM, RESOLUTION: 0.001MM. 17 DIGIMATIC OUTSIDE MICROMETER COMPLETE WITH DIGITAL DISPLAY AND INTERCHANGEABLE ANVIL 0, 25, 50,75 MM. IN ORIGINAL CARRYING CASE. SIZE : MM, RESOLUTION: 0.001MM. 18 DIGIMATIC OUTSIDE MICROMETER COMPLETE WITH DIGITAL DISPLAY AND INTERCHANGEABLE ANVIL 0, 25, 50,75 MM. IN ORIGINAL CARRYING CASE. SIZE : MM, RESOLUTION: 0.001MM. 19 DIGIMATIC OUTSIDE MICROMETER COMPLETE WITH DIGITAL DISPLAY AND INTERCHANGEABLE ANVIL 0, 25, 50,75 MM. IN ORIGINAL CARRYING CASE. SIZE : MM, RESOLUTION: 0.001MM. 20 DIGIMATIC OUTSIDE MICROMETER COMPLETE WITH DIGITAL DISPLAY AND INTERCHANGEABLE ANVIL 0, 25, 50,75 MM. IN ORIGINAL CARRYING CASE. SIZE : MM, RESOLUTION: 0.001MM. 21 DIAL VERNIER CALIPER : SIZE : 300MM (L.C : 0.02MM/0.001") SUITABLE TO TAKE INSIDE, OUTSIDE, DEPTH AND STEP PRECISION MEASUREMENTS. DUAL READING SCALE(METRIC AND INCH). MFG. FROM HARDENED SS 1 Number 1 Number 1 Number 1 Number 1 Number 2 Number T Page 14 of 15

15 AND SATIN FINISH. 22 MAGNETIC STAND, MODEL: Number 23 UNIVERSAL TYPE MAGNETIC 2 Number STAND, MODEL: UNIVERSAL TYPE MAGNETIC 2 Number STAND, MODEL:7033B 25 MAGNETIC STAND WITH FLEXIBLE 3 Number COLUMN, MODEL: METRIC RECTANGULAR GUAGE 1 Set BLOCK SET OF STEEL 1MM BASE BLOCK SET. TYPE: STEEL 112- BLOCK SET 27 PRECISION LEVEL, MODEL: Number 28 PRECISION LEVEL, MODEL: Number Notes: (1) The party has to refer Technical Bid for Technical Specification of above mentioned item. (2) While filling-up various taxes through On-line Price Bid, the party has to mention the tax in Rupees instead of percentage. Yours Faithfully, CHIEF ENGINEER (GEN.) (Signature of the Tenderer) GSECL, Ukai TPS. (With Company`s Round Seal) T Page 15 of 15