Phone:
|
|
- Dennis Morgan
- 5 years ago
- Views:
Transcription
1 KERALA AGRICULTURAL UNIVERSITY AGRICULTURAL RESEARCH STATION MANNUTHY THRISSUR Phone: arsmannuthy@kau.in RE-TENDER NOTICE No. B/400/ dated 0/03/06 Sealed tenders are invited for the supply of FARM MACHINERY/ EQUIPMENTS whose specifications are given as annexure. The tender documents and conditions. The tender form may be downloaded from the following web link in the Internet: The cost of tender form is Rs. 0.0% of PAC (rounded to nearest 00/- minimum Rs.500/-) + 5% VAT. A DD for the amount drawn in favour of The Professor and Head, Agricultural Research Station, Mannuthy, Pin-68065, Thrissur, payable at SBT Ollukkara (Code-700) should be enclosed along with the tender submitted.. Earnest Money Deposit (EMD) of the cost of equipment offered may be remitted by a separate DD drawn as detailed above. 3. Agreement on Kerala Stamp paper for Rs Form of agreement can be downloaded from the website under the Related Documents section. 4. The offer for the item should indicate separately the basic unit, accessories and optional and its cost. Taxes, customs and excise duty, packing, forwarding, insurance and any other cost for its installation, if any should also be included. 5. The sealed cover containing the tender documents should be super scribed FARM MACHINERY/ EQUIPMENTS and sent to The Professor and Head, Agricultural Research Station, Mannuthy, Pin-68065, Thrissur, Kerala. 6. Tenders received late or incomplete in any respect will be summarily rejected without notice and the decision of the undersigned on such matters will be final. 7. Successful tenderers will have to execute an agreement and remit security 5% of the value of the articles ordered, less the amount of EMD, drawn as DD or fixed deposit receipt. 8. The items are to be supplied at the Agricultural Research Station Mannuthy as per indent. 9. The supplier should give the details of the nearest service center and response time. 0. Details of warranty, after sale service offered on expiry of normal warranty period, available should be mentioned.. The undersigned reserves the authority to accept or reject any or all the tenders without assigning any reason.. The decision of the undersigned in finalizing the tenders shall be final and binding. 3. Leaflets/ brochures/ catalogues of the equipment describing its features, applications, specifications etc. should be provided along with tender. A drawing of the table assembly should be provided along with tender 4. Tenders will be received up to.30 PM on Tenders will be opened at.30 PM on in the presence of the tenderers present at that time. 6. The supply should be effected before
2 7. All conditions of Kerala government tenders are applicable in this case also. Further information can be had from the web site or from the office of The Professor and Head, Agricultural Research Station, Mannuthy, Pin-68065, Thrissur ANNEXURE Sl. Item Quantity Specification No. Chain Saw stroke Petrol,4 4.5 hp, mm, Saw length. Telescopic pruner 3. Walk Behind Transplanter stroke petrol,.5 hp, Cutting bar length: mm, Over all reach: 3.5 m (min.), Pruning head adjustment: 0-90 Type: Walk behind two wheel, Three Float Type, Air cooled four stroke Petrol engine, Horse Power: HP, Rated rpm: around 3000 rpm, Starting Mechanism: Recoil starter, Number of planting rows:4 row, Row spacing:0/30 cm, Plant spacing: adjustable to 0-0 cm, depth of planting: adjustable -5cm, Weight: less than 50 kg PROFESSOR & HEAD
3 KERALA AGRICULTURAL UNIVERSITY AGRICULTURAL RESEARCH STATION MANNUTHY THRISSUR Phone: arsmannuthy@kau.in TENDER NOTICE No. B/400/ dated Sealed tenders are invited for the supply of FARM MACHINERY WORKSHOP TOOLS whose specifications are given as annexure. The tender documents and conditions 8. The tender form may be downloaded from the following web link in the Internet: The cost of tender form is Rs. 0.0% of PAC (rounded to nearest 00/- minimum Rs.500/-) + 5% VAT. A DD for the amount drawn in favour of The Professor and Head, Agricultural Research Station, Mannuthy, Pin-68065, Thrissur, payable at SBT Ollukkara (Code-700) should be enclosed along with the tender submitted. 9. Earnest Money Deposit (EMD) of the cost of equipment offered may be remitted by a separate DD drawn as detailed above. 0. Agreement on Kerala Stamp paper for Rs Form of agreement can be downloaded from the website under the Related Documents section.. The offer for the item should indicate separately the basic unit, accessories and optional and its cost. Taxes, customs and excise duty, packing, forwarding, insurance and any other cost for its installation, if any should also be included.. The sealed cover containing the tender documents should be super scribed FARM MACHINERY WORKSHOP TOOLS and sent to The Professor and Head, Agricultural Research Station, Mannuthy, Pin-68065, Thrissur, Kerala. 3. Tenders received late or incomplete in any respect will be summarily rejected without notice and the decision of the undersigned on such matters will be final. 4. Successful tenderers will have to execute an agreement and remit security 5% of the value of the articles ordered, less the amount of EMD, drawn as DD or fixed deposit receipt. 5. The items are to be supplied at the Agricultural Research Station Mannuthy as per indent. 6. The supplier should give the details of the nearest service center and response time. 7. Details of warranty, after sale service offered on expiry of normal warranty period, available should be mentioned. 8. The undersigned reserves the authority to accept or reject any or all the tenders without assigning any reason. 9. The decision of the undersigned in finalizing the tenders shall be final and binding.
4 30. Leaflets/ brochures/ catalogues of the equipment describing its features, applications, specifications etc. should be provided along with tender. A drawing of the table assembly should be provided along with tender 3. Tenders will be received up to.30 PM on Tenders will be opened at.30 PM on in the presence of the tenderers present at that time. 33. The supply should be effected before All conditions of Kerala government tenders are applicable in this case also. Further information can be had from the web site or from the office of The Professor and Head, Agricultural Research Station, Mannuthy, Pin-68065, Thrissur ANNEXURE Sl. No Item Quantity A. MEASURING AND SPECIAL TOOLS. AC line tester, length-50 mm, Rectangular. Avometer/multi meter 3. Bearing puller, mini type,00 mm 4. Universal Bearing Puller Kit Mini range 4 5. Bend type circlip plier with insulated with thick C.A sleeve (Internal, 80mm) 6. Bend type circlip plier with insulated with thick C.A sleeve (External, 80 mm) 7. C clamp (300mm) 3 8. C clamp (50mm) 9. battery capacity tester,v with resistor 0. Compression tester for diesel engines. Compression tester for petrol engines. Tin Cutters with spring 00mm 3. Cylinder dial bore gauge (size- ½ to 7/8 4. Cylinder dial bore gauge (size -7/8 to ) 5. Cylinder dial bore gauge (size -6 ) 6. Cylinder dial bore gauge (size 6- ) 7. Engineers Square size -6
5 8. Engineers Square size 9. Engineers Square size 4 0. Feeler Gauge, 3 blade (.0- mm).. drill bit, mm drill bit, 6 mm Hollow punch set, 6,8,0,,4 mm Hydrometer 5. Kerosene blower L Measuring steel tape,3m Measuring tape,30 m 3 8. Measuring Tool set 9 pieces Force Type Micrometer outside 30. Micrometer Inside 3. Piston ring compressor, mm 3. Piston ring expander, mm Punch, 6 mm Punch, Centre punch /8 point taper 5 length, 3/8 point taper 6 length 35. Scriber 00 mm dia 5 mm set set Sludge hammer with handle, kg Spirit level (Magnet type),portable 300 mm Stainless steel foot rules with inch and mm, Stainless steel foot rules with inch and mm, 40. Stainless steel foot rules with inch and mm, 4 4. Stainless steel foot rules with inch and mm, m 4. Stud remover assembly 8-0 mm
6 43. Tap & die wrench (mini set,6-mm) 44. Taper shank drill bit 0 mm Torque wrench, pounds Tool kit Force 4 pieces Combination tool se ½, 3/8, ¼ SD(Force 44) Tyre pressure gauge Universal cylinder sleeve puller Universal surface gauge, set 50. Valve spring compressor kit, 50 mm Vernier Caliper -Dial vernier caliper stainless steel Vernier Caliper -Digital vernier caliper 53. Vice grip pliers (7 and 0 long) set 54. Vice grip plier (8 ) 4 set Adjustable screw spanner (Size: 55, 05, 55, 305mm) Wrenches - Pipe (Size: 50, 350, 450, 600 mm) set set B. EQUIPMENT TOOLS 57. Bench vice 50 mm 58. Bench vice 00 mm 59. Compressor 50 liter tank with 3HP motor, hose and gun. 60. Electrical weighing balance (small) Weighing capacity: 5 kg 6. Extension box 5m, 0A 6. Grease gun mini type 63. Nylon brush 50 mm 64. Carpentry Hand drill (Manual, 8mm) 65. Hand grinder, Multipurpose 00 mm,00 W, Single phase 66. PVC Hose ½ one coil unit of 5 m
7 67. Hydraulic jack 5 tonne (roller type) Impact drive tool kit mini set 69. High pressure washer 70. Valve Lapping cutter assembly 0,5,40mm dia and 30, 45 deg mini kit 7. Oil gun 00ml 7. Drill electric portable 5mm ac0v -phase 73. Portable electric grinder Disc dia 5mm,no-load speed 000rpm,power input 670 W 74. Portable hydraulic lifter range 5-000mm and tonne, with adjustable hook 75. Lever type Grease gun with flexible connection, kg 76. Rivet gun (SWG 5,6,7,8 ) 77. Metal Shelf (800 x 900x 500mm)hg Soldering iron Single phase,50w 79. Spade big( 00mm) 80. Spade small (50mm) 8. Taper shank drill bit 0 mm 8. Portable Tile Cutter (000W) C. LOOSE TOOLS Allen key set, -0 mm 3 Allen key, 5 mm Allen key, 6 mm Allen key set ( T handle), 5&6 mm 3 set Allen key set ( T shape)- -0 mm set 88. Socket spanner,.5mm drive, 0-3mm ( socket) with handle + extension 89. Socket spanner, 0mm drive, -60 mm, Heavy duty with completed set. 90. Socket spanner set small, 0mm drive, 8- mm handle + extension. 3 set set set
8 9. Chisel cold (00x.5mm) Chisel flat cold (50 x.5mm). 93. Chisel flat cold (00 x.5mm). 94. Chisel flat cold 50 x 5 mm). 95. Circlip plier- internal, 75 mm (9-60 mm) cap Circlip plier- external, 75mm (9-60mm) cap Combination plier 50 mm Combination plier (00,5,50,75,0 mm) set 99. Combination slip pliers: Chrome plated, (50,00,50 mm) long set 00. Double end spanner (metric 6-3mm) set 0. Double end spanner (6-7 mm) 4 0. Double end spanner (8-9 mm) Double end spanner (0- mm) Double end spanner (-3 mm) Double end spanner (4-5 mm) Double end spanner (6-7 mm) Double end spanner (8-9 mm) Double end spanner (0- mm) Double end spanner (-3 mm) 5 0. Double end spanner (4-6 mm) 5. Double end spanner (4-7 mm) 5. Double end spanner (5-8 mm) 5 3. Double end spanner (30-3 mm) 5 4. Emitter punch for drip,4 mm 4 5. Flat file nd cut 50 mm
9 TORX allen key, 4-0 mm TORX allen key full set 4-0 mm (T handle) set Hammer Ball pein Hammer (½ lb, lb, ½ lb) 3 set Hammer Ball pein Hammer (500g) set Hammer Ball pein Hammer (800g) 5 set Hammer soft ( 0,5,30,40 mm) 4 set Hammer semi soft (50,00 mm) set Box joint water pump plier, 50 mm straight Nose plier 5 mm straight Nose plier, 50 mm Ring expander, medium expander, 80-0mm Ring spanner ( 6-3 mm) set Ring spanner (6-7 mm) 4 Ring spanner (8-9 mm) 4 Ring spanner (0- mm) 4 Ring spanner (-3 mm) 3 Ring spanner (4-5 mm) 4 Ring spanner (6-7mm) 4 Ring spanner (8-9 mm) 4 Ring spanner (0- mm) 4 Ring spanner (-3 mm) 4 Ring spanner (4-6 mm) 4 Ring spanner (4-7 mm) 4 Ring spanner (5-8 mm) 4 Ring spanner (30-3 mm) 4
10 Round file (big), 00 mm Round file- half round, nd cut 50 mm Round file (small), 50 mm 44. Flat Screw driver blade- length 00mm, dia 4 mm 45. Flat Screw driver Blade-length 50mm, dia 6 mm 46. Flat Screw driver-nylon screw drivers with finest alloy steel (blade length 00, 50, 00 and 50mm with width of tip 3,6,8 and 0 mm) 47. Philips Screw driver Blade length-00,dia-5 mm 48. Two in one Screw driver, Blade length 55 mm dia 3 mm 49. Insulated Screw driver blade length-5 mm, dia 3.5 mm blade length- 00 mm, dia 4 mm blade length-00 mm, dia 5 mm 50. Philips Screw driver blade length-50mm,dia 6mm 5. Philips Screw driver Blade length-50mm,dia-6mm 5. Screw spanner adjustable, 50 mm 53. Triangular file, nd cut 50mm nos nos set 4 nos 4 nos set nos nos set PROFESSOR & HEAD
ACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Marine and Outdoor Power Equipment Technician AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours
More informationFACILITY ACCREDITATION CHECKLIST R: 04/27/06 APPRENTICESHIP Designated Trade: Motor Vehicle Mechanic Level (circle one)
FACILITY ACCREDITATION CHECKLIST R: 04/27/06 APPRENTICESHIP Designated Trade: Level 1 2 3 (circle one) Institution: Evaluator(s) / / Rating Code: Y = Yes* N = No* R = Required * * Please use a CHECKMARK
More informationv.meku rfkk fudksckj iz kklu ANDAMAN & NICOBAR ADMINISTRATION
e-mail:dirtpt@ and.nic.in Ph: 03192-232150 MT/1-11/PS/WS-Tools/2013-14/10736 v.meku rfkk fudksckj iz kklu ANDAMAN & NICOBAR ADMINISTRATION ifjogu funs kky; DIRECTORATE OF TRANSPORT Port Blair dated the
More informationUnit: (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI.
Trade: Fitter Unit: 1+1+1 (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI. S.NO FITTER TOOL KIT QTY Rate/Item Amount 1 Rule
More informationLab Specifications. Automotive 2 Wheeler Repair
Lab Specifications Automotive 2 Wheeler Repair An initiative of Ministry of Skill Development & Entrepreneurship, Govt. of India and National Skill Development Corporation 02 If we have to promote the
More informationMotor Cycle Mechanic 1
Motor Cycle Mechanic 1 Training Objective: Motor Cycle is a popular use in urban as well as rural areas throughout the country. This course aims at producing semi skilled workers who can carryout minor
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Automotive Service Technician AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s)
More informationGeneral Maintenance Tool Kit (GMTK) Drawer layout
26 2 8 6 5 32 31 35 25 11 9 33 7 24 23 22 28 21 20 27 19 18 17 34 16 15 10 14 13 12 4 3 30 1 General Maintenance Tool Kit (GMTK) Drawer layout COMP # DESCRIPTION BRAND PART NO. WARRANTY 1-3/16 Drawer,
More information2011 Cat Hand Tools and Shop Supplies
2011 Cat Hand Tools and Introduction................................................................................................................................ 1-1 Hand Tools Section Index...................................................................................................
More informationDETAILS OF EQUIPMENTS/TOOLS OF VARIOUS SHOPS IN WORKSHOP (MECHANICAL ENGG.) Name of Article. Fitting Shop (Workshop)
DETAILS OF EQUIPMENTS/TOOLS OF VARIOUS SHOPS IN WORKSHOP (MECHANICAL ENGG.) S.No. Name of Article 1 Bench Vice 2 V block 3 Spanner Set 4 File Flat 5 Hacksaw Frame 6 Combination Set 7 Center Punch 8 Dial
More information$1795 $2350 $540 $1650 $2700 $1200 BONUS! BONUS! More than 3,000 tools within our range! 295PC TOOL KIT 262PC TOOL KIT 7 DRAWER ROLL CABINET
262PC TOOL KIT 295PC TOOL KIT 9 Drawer Tool Box with BBS High Density Foam Inserts Spanner Sets Assorted Pliers Screwdriver Sets Punch & Chisel Sets Hex Key Set. Hacksaw, Hammer Plus Much More ATK79BB
More informationTECHNICAL BID T 3627
TECHNICAL BID T 3627 Supply of Mechanical Measuring Instruments for TMD-II OF UKAI TPS. Due on At 3.30 P.M. (if Possible) EMD paid YES / NO EMD D. D. No. Date : OR SSI / NSIC Certification Number : Duly
More informationSpring Special. 1 October - 30 November 2012 GLFS0012 R R GLFS0008. Micro - Tec
Spring Special *All Prices Incl VAT* E&OE 1 October - 30 November 2012 MSS9600 61pc Tool Set R2 502.00 1/2 Socket Sizes (12 Point): 8 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 1/2 Reversible Ratchet
More information1 JULY ~ 30 AUGUST 2013 Micro - Tec
*All Prices Excl VAT* WINTER SPECIALS E&OE 1 JULY ~ 30 AUGUST 2013 KI-1312 R1 277.00 Sq. Dr Heavy Duty Composite Mini * Impact Wrench *Handle Exhaust with Muffler Sq. Dr: : 11000RPM : Max Torque: 60 NM
More informationTools Online Retailer Returns - TRACY - February 16
s Online Retailer Returns - TRACY - February 16 Auction Opens: Fri, Feb 9 12:09pm PT Auction Closes: Fri, Feb 16 10:00am PT TB7000 Wheel Barrow TB7033 TB7001 Wheel Barrow TB7034 TB7002 Wheel Barrow Tub
More informationErgonomic design for comfort. Reduced vibration. Twin hammer impact mechanism. Part No. Maximum Torque Free Speed Weight Ave Air Consumption
3/8 Impact wrench The smallest in PCL s range of Prestige Impact Wrenches. The 3/8 Impact Wrench is designed for professional heavy duty use, with an ergonomically designed soft grip handle and a lightweight
More informationMaster Sets with Foam Tray Organizers
Master Sets with Foam Tray Organizers D096005-FT1T 1/2" Drive SAE Impact Sockets 6 Point Standard Sockets: 3/8" - 1-1/2" - 6 Point Deep Sockets: 3/8" - 1-1/2" Foam Tray Organizer: 21-3/4" (w) x 15" (d)
More informationALLTRADE & POWERBUILT NEW PRODUCT (SOME SHELF LIFT ITEMS)
AT-020014 IMPACT WRENCH 19.2V KAWASAKI 1\10 $59.00 11 AT-040013FC PLIERS SET 2PC X-DUAL HEAD (DISPLAY) 4-8\10 $7.95 253 AT-150017 UTILITY KNIFE, FOLDING, QUICK RELEASE (DISPLAY) 20- $2.95 99 AT-150030
More informationGOVERNMENT ITI DHANUVACHAPURA
Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized HEAVY MACHINERY 1 Milling machine (vertical)size no1 with standard accessories & the
More informationMASTER TOOL CATALOGUE TOLEDO - 60 YEARS OF EXCELLENCE
MASTER TOOL CATALOGUE TOLEDO - 60 YEARS OF EXCELLENCE OUR HISTORY Founded in Sydney Australia more than 60 years ago, Toledo has become an industry leading name in quality hand tools. Today, Toledo proudly
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS --1075 North Ave. Sanger, CA 93657-3539 local: 559-875-0222 fax: 559-876-2259 toll free: 800-445-3767-- 2505 Lowering Spindle Assembly Installation Instructions ½ TON SILVERADO
More informationOCCUPATIONAL TOOLS AND EQUIPMENT LIST
OCCUPATIONAL TOOLS AND EQUIPMENT LIST Motor Vehicle Body Repairer (Metal and Paint) Government of Newfoundland Labrador Department of Advanced Education and Skills December 2011 Preface This document is
More informationSPICES BOARD (Ministry of Commerce & Industry, Govt. of India) Palarivattom.P.O. N H By Pass Kochi
SPICES BOARD (Ministry of Commerce & Industry, Govt. of India) Palarivattom.P.O. N H By Pass Kochi 682025 Phone: 0484-2333603 Email: sbqelkochi@gmail.com REQUIREMENT OF UPS Systems and Batteries for Quality
More information80 PHONE SECTION 3 CUTTING ONSITE SUPPLY RENTAL & EQUIPMENT 1. PIPING 2. WORKSHOP MACHINERY SPECIALISED FORCE
3. 4. TORQUING & 5. WELDING 6. POWER TOOLS 7. HAND & ELECTRICAL TOOLS 9. LUBRICANTS & SEALANTS 10. TAPES & PACKAGING 11. SAFETY 13. CATERING 14. HARDWARE, & JANITORIAL FITTINGS & BUILDING 80 80 PHONE 1800
More informationONLY use MLR, Ast, or MST
2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 20 2 22 23 24 25 26 27 28 29 30 3 TRANSPORTATION CLUSTER AUTO SERVICE TECHNOLOGY EQUIPMENT LIST ONLY use MLR, Ast, or MST Estimated Cost Each Estimated Total Cost Automotive
More informationLab Specifications. Automotive 4 Wheeler Repair
Lab Specifications Automotive 4 Wheeler Repair An initiative of Ministry of Skill Development & Entrepreneurship, Govt. of India and National Skill Development Corporation 02 If we have to promote the
More informationENGINE MECHANICAL PREPARATION SST mm Socket Wrench for 12 Pointed Head Union Nut Wrench 12mm PARTIAL ENGINE ASSY(1ZZ FE)
SST 025 021E001 0901138121 12 mm Socket Wrench for 12 Pointed Head CYLINDER BLOCK(1ZZFE) 0902338200 Union Nut Wrench 12mm 0903200100 Oil Pan Seal Cutter 0920101055 Valve Guide Bushing Remover & Replacer
More information$4.99 $26.99 $19.99 $25.99 $7.99 $10.99 $12.99 $15.99 $17.99 $ Rubber Mallet-Hickory Handle. Dead Blow Hammer-Fiberglass Handle
Two or three jaws design for Spring-loaded jaws for quick and easy one person set-up for different applications Heavy duty forcing screw with live center for strong even pulls Spread range from 3 to 7
More informationAUDI UK - Mandatory Workshop Equipment List - From March 31st 2012
From arch 31st 2012 : Diagnostic machines -1 per 3 techs (excluding apprentices), VAS 5051B or VAS 5052A / VAS 6150 plus a VAS 6356 Test Box Wing Front Protectors, Steering Wheel Seat Covers - 1 per 1
More informationHkkjrh; izca/k lalfkku dksf"kddksm
Hkkjrh; izca/k lalfkku dksf"kddksm vkbz- vkbz-,e- dksf"kddksm dseil (ih-vk-s), dksf"kddksm 673 570, dsjy INDIAN INSTITUTE OF MANAGEMENT, KOZHIKODE IIM Kozhikode Campus P.O. Kozhikode- 673 570 Phone: 0495
More informationRECOMMENDED TOOLS AND CHECKERS. Page RECOMMENDED TOOLS AND CHECKERS... 2
RECOMMENDED TOOLS AND CHECKERS Page RECOMMENDED TOOLS AND CHECKERS........... 2 4 1 09010-3C100 Hexagon Wrench Set (09013-6C100) ( Wrench 5 ) (09013-6C110) ( Wrench 6 ) (09013-6C120) ( Wrench 8 ) (09013-6C130)
More information14 Miscellaneous tools
14 Miscellaneous tools Bench vice 249 Suction lifter 251 Telescopic 252 mirror Wire guide 252 Puller 254 Multi-tool 257 Riveter 258 Oil filter wrench 260 Electric welder 261 Mortar Glue gun 261 Caulking
More informationTOOLS AND EQUIPMENT. C. For Specialty Tools and Equipment, the program need only have those tools for the areas being accredited.
TOOLS AND EQUIPMENT Local employer needs and the availability of funds are key factors for determining each program s structure and operation. The Program Standards recognize that not all programs have
More information1GR-FE ENGINE CONTROL SYSTEM
PREPARATION 1GR-FE ENGINE CONTROL SYSTEM 1GR-FE ENGINE CONTROL SYSTEM PREPARATION RECOMMENDED TOOLS 1 09040-00011 Hexagon Wrench Set (09043-20080) Socket Hexagon Wrench 8 (09043-20100) Socket Hexagon Wrench
More informationAgricultural Technology and Mechanical Systems
Agricultural Technology and Mechanical Systems Maximum Number of Team Members 4 Number of Team Members Scored 4 Scantron Committee: Craig Canterbury Tim Cunnien Brent Ebert Jeremy Greene John Workman Ag
More informationOVERHAUL. 1. REMOVE W/HEAD TAPER SCREW PLUG NO.2 (a) Using a socket hexagon wench 10, remove the taper screw plug and gasket.
14138 ENGINE MECHANICAL OVERHAUL 140Q703 1. REMOVE W/HEAD TAPER SCREW PLUG NO.2 (a) Using a socket hexagon wench 10, remove the taper screw plug and gasket. A62890 2. REMOVE VALVE LIFTER (a) Remove the
More informationMeeting the needs of automotive customers and MRO organizations, no toolbox is complete without an assortment of specialty items. Blackhawk by Proto
Specialty tools Meeting the needs of automotive customers and MRO organizations, no toolbox is complete without an assortment of specialty items. Blackhawk by Proto includes popular puller configurations,
More information2AZ-FE ENGINE CONTROL SYSTEM
PREPARATION 2AZ-FE ENGINE CONTROL SYSTEM 2AZ-FE ENGINE CONTROL SYSTEM PREPARATION SST 1 09817-33190 Sensor Socket Wrench Engine coolant temperature sensor 2 PREPARATION 2AZ-FE ENGINE CONTROL SYSTEM RECOMMENDED
More informationAUTOMOTIVE MANUFACTURING
REDESIGNED MODULES FOR THE SECTOR OF AUTOMOTIVE MANUFACTURING UNDER MODULAR EMPLOYABLE SKILLS (MES) Redesigned in - 2014 By Government of India Directorate General of Employment & Training Ministry of
More informationTOOL SETS. Handsaws 1
TOOL SETS Handsaws 1 2 Concrete saw & mitre saws + boxes INDEX Combination tool sets SOCKET SETS KRT951003 KRT951000 KRT951004 KRT951005 KRT500112 KRT500113 KRT500114 KRT951006 KRT951001 KRT951002 KRT951007
More informationRegional Office: Vijayapura Plot No6, Trimurthy Nagar Managuli Bypass Road, Vijayapura Diesel Generator Required on Rental Basis
Regional Office: Vijayapura Plot No6, Trimurthy Nagar Managuli Bypass Road, Vijayapura - 586109 Diesel Generator Required on Rental Basis Bank desires to hire diesel generator on rental basis for the following
More informationNo. 4 CARPENTARY TOOLS HAND TOOLS ELECTRICAL TOOLS AN ISO 9001 : 2008 CERTIFIED COMPANY M IN
M4570910IN CARPENTARY TOOLS HAND TOOLS ELECTRICAL TOOLS No. 4 GARAGE TOOLS PLUMBER TOOLS PRICE LIST w.e.f. 1st Jan - 2016 HBH-BELTO Hacksaw Blade Special BC-BELTO CHISEL JHF-BELTO HACKSAW FRAME Thickness
More information1NZ-FE ENGINE CONTROL SYSTEM
PREPARATION 1NZ-FE ENGINE CONTROL SYSTEM 1NZ-FE ENGINE CONTROL SYSTEM PREPARATION SST 1 09817-33190 Sensor Socket Wrench 2 PREPARATION 1NZ-FE ENGINE CONTROL SYSTEM RECOMMENDED TOOLS 09082-00040 TOYOTA
More information25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613) Fax:(613)
25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613)546-6663 1-800-267-0920 Fax:(613)542-4451 EMAIL: info@levacsupply.com 330 LAURIER BLVD. P.O. BOX 460 BROCKVILLE, ONTARIO K6V 5V6 (613)345-1991 1-877-270-0317
More information$ Ex. GST $
SALE ENDS 31/12/08 LOOK INSIDE FOR MORE GREAT GIFT IDEAS! Apprentice Tool Chest 151 Piece 6 Drawer This fantastic 151 Piece Apprentice Tool Kit is ideal for the New Apprentice Including all the tools you
More informationENGINE MECHANICAL PREPARATION SST mm Socket Wrench for 12 Pointed Head
SST 027 023HH01 0901138121 12 mm Socket Wrench for 12 Pointed Head CYLINDER BLOCK ASSY(2AZFE) PARTIAL ENGINE ASSY(3MZFE) (3MZFE) NO.2(3MZFE) CYLINDER BLOCK ASSY(3MZFE) 0903200100 Oil Pan Seal Cutter PARTIAL
More informationFeatures and Specifications for Impact Wrenches
Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN
More informationTender documents for supply, erection & commissioning of Plante Type Battery to 2x210 MW IB Thermal Power Station.
ORISSA POWER GENERATION CORPORATION LIMITED IB THERMAL POWER STATION AT/P.O: BANHARPALI, DIST: JHARSUGUDA, PIN: 768234 (ORISSA), INDIA GRAM: IB THERMAL, TEL: 06645-222209/222210, FAX: 06645-222209/54/30
More informationNEW PRODUCTS GUIDE EDITION Oil Filter Remover Set 21 Piece. Oil Filter Remover Set Truck 6 Piece
EDITION 1. 2015 NEW PRODUCTS GUIDE 305900 Oil Filter Remover Set 21 Piece Professional 21 piece set supplied in blow mould storage case Manufactured from premium aluminium material to provide a long service
More information1.1/2" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer)
Impact Wrenches 13000-2 Anvil Length Bolt Capacity Overall Length Torque (5s) 12000-2 8" 3,700rpm 2,000 ft-lbs 10kg 2" 3,700rpm 2,000 ft-lbs 7.7kg 3/4" - Air Impact Wrench (Single Hammer) 1266 2" 3,700rpm
More information2005 Toyota RAV AUTOMATIC TRANSMISSIONS U240E & U241E Overhaul
2001-05 AUTOMATIC TRANSMISSIONS U240E & U241E Overhaul APPLICATION CAUTION: Flush oil cooler and oil cooler lines prior to transaxle installation. Oil cooling system contamination may cause premature transaxle
More informationNIT No.:-10/WEX/MCR/HYD. PRESS/2-303/ /Dt
Annexure-1 NIT No.:-/WEX/MCR/HYD. PRESS/2-303/21-12/Dt.02.03.22 Name of work:-retrofitting of new hydraulic power pack on 63 Ton Hydraulic Press, Plan No.1/2-303 SCOPE OF SUPPLY AND WORK: 1.0 Purpose of
More informationCRANKSHAFT & MAIN BEARINGS
CRANKSHAFT & MAIN BEARINGS * PLEASE READ THIS FIRST * REMOVAL Ensure all main bearing caps are marked for location on cylinder block. Some main bearing caps have an arrow stamped on them. The arrow must
More informationSolar Trike w i t h A C C U b a t t e r y d r i v e a n d LED lighting
1.693 Solar Trike w i t h A C C U b a t t e r y d r i v e a n d LED lighting Necessary materials Fretsaw with metalworking blade drills. dia. 3,, 6, 7, Machine vice with soft jaws Soldering iron, solder
More informationList of Machinery and Equipment for M.M.V.trade (Annexure A)
List of Machinery and Equipment for M.M.V.trade (Annexure A) S.NO Name and description of article Quantity (in Nos) 1. Steel rule 15 cm inch and metric 21-No s 2. Steel rule 30 cm inch and metric -do-
More information1/2 Air Impact Wrench P/N IR 2235TiMAX-2 With 2 Anvil, Weighs Only 4.9 lbs ft.-lbs. torque. 3/4 Super Duty P/N IR 261
37 Order NLINE www.midwestwheel.com CATALOG NUMBER Ingersoll Rand Air Tools & Accessories 3/8 Air Impactool IR 2115TiMAX The best power-to-weight ratio in its class 300 ft.-lbs. torque Enhanced power settings
More informationAIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258
More informationABC Awards Level 1 Award in. Automotive Studies. Multiple Choice Examination
ABC Awards Level 1 Award in Automotive Studies Multiple Choice Examination Specimen Paper TIME: 1 hour Each question is worth 1 mark. The total number of marks available is 35. This is to show the type
More informationINVITATION FOR QUOTATION. TEQIP-III/2018/ntst/Shopping/35
INVITATION FOR QUOTATION TEQIP-III/2018/ntst/Shopping/35 29-Dec-2018 To, Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for the
More informationD Piece 12 Point Standard Metric Socket Set. D Piece 6 Point Metric U-Joint Socket Set mm List Price: $ $120.
D004004 28 Piece 6 Point Standard SAE/Metric Socket Set SAE Standard: 3/16-9/16 Metric Standard: 4-15 mm 2, 6 Extensions Hand Driver U-Joint 45 Tooth Ratchet List Price: $170.74 $112.99 D004008 9 Piece
More informationA* CHAIN HOOKS, 1/4" EA A* CHAIN HOOKS, 5/16" EA A* BELT, SANDER 120 GRIT EA 3" X 24" A* BELT, SANDER 120
HAND TOOLS A*0000080001 ROPE, NYLON 1/4" FT A*0000080002 ROPE, MANILLA 1/2" FT A*0000080003 DOWELL RODS 1/4" EA A*0000080004 DOWELL RODS 3/8" EA A*0000080005 DOWELL RODS 1/2" EA A*0000080006 DOWELL RODS
More informationBIDDERS SHOULD SUBMIT THE DOWNLOADED DOCUMENTS, DULY FILLED, STAMPED AND SIGNED, AS PER THE INSTRUCTIONS GIVEN HEREUNDER.
Taluka: Thasra Dist : Kheda Pin: 388 239 Telephone No. 02699-235 522 Fax No. 02699-235 607 CHIEF ENGINEER (C&O), GSECL,, INVITES TENDERS FROM INTERESTED BIDDERS, FOR SUPPLY OF ABOVE MATERIAL. THE DETAILS
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E493 ELECTRIC TOOL PARTS LIST ROTARY HAMMER Model 2006 7 3 (E1) 1 2 3 4 501 502 48 11 12 13 14 15 24 25 26 30 31 32 25 5 6 16 17 18 19 27 28 33 34 35 7 8 20 29 21 9 22 10 23 36
More informationUNESCO / Vocational Education Erbil and Dohuk
Item Code Item Description Unit Qty Destination Intended Use Carpentry machine, multi-function (7 mini), large 06-12-00001 size set 2 06-12-00002 90 cm band saw for carpentry with full Wood turning lathe
More informationPRICE BID T Supply of various Tools & Tackles for TPS Ukai.
GUJARAT STATE ELECTRICITY CORPORATION LIMITED ISO 900:008, ISO 00:00 and OHSAS 800:007 CERTIFIED THERM AL PO WE R ST A TION, U K AI U K A I D A M 9 8 0, D I S T R I C T : T A P I Phone : 0 -, Fax : 0-00
More informationCCE RF CCE RR NSQF LEVEL-2. General Instructions to the Candidate : This Question Paper consists of 34 objective and subjective types of question.
Tear here TEAR HERE TO OPEN THE QUESTION PAPER CCE RF CCE RR SL. No. : TTTT 34 ] [ 8 Total No. of Questions : 34 ] [ Total No. of Printed Pages : 8 : 88-EK Code No. : 88-EK NSQF LEVEL-2 & Subject : Automobile
More informationSAVE ENERGY FOR BENEFIT OF SELF AND NATION
Taluka: Thasra Dist : Kheda Pin: 388 239 Telephone No. 02699-235 522 Fax No. 02699-235 607 CHIEF ENGINEER (C&O), GSECL,, INVITES TENDERS FROM INTERESTED BIDDERS, FOR SUPPLY OF ABOVE MATERIAL. THE DETAILS
More informationD Piece 12 Point Standard Metric Socket Set 4-12 mm List Price: $25.65 $16.99
D004000 11 Piece 6 Point Standard SAE Socket Set 5/32"-9/16" List Price: $32.46 $21.99 D004008 9 Piece 12 Point Standard Metric Socket Set 4-12 mm List Price: $25.65 $16.99 $77.99 D004005 25 Piece 6 Point
More informationRECOMMENDED TOOLS AND CHECKERS
RECOMMENDED TOOLS AND CHECKERS Page RECOMMENDED TOOLS AND CHECKERS........... 2 4 : An impact wrench can be used with tools with this mark. As tools without this mark are meant to be operated manually,
More informationService Tools. Service and Repair Manual Model 900/950/990 ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION ITEM PART NO.
12 1 3 2 4 5 8 10 6 7 9 11 14 24 12 13 17 22 29 18 23 25 19 26 15 20 27 21 16 22 33 37 38 32 31 36 30 34 35 40 41 42 43 ITEM PART NO. DESCRIPTION 1 9170 0231 30 LONG ALLEN KEY 2 9170 0737 20 3/32 PIN PUNCH
More informationDRIVER CUM MECHANIC (LIGHT MOTOR VEHICLE)
Syllabus For the trade of DRIVER CUM MECHANIC (LIGHT MOTOR VEHICLE) Under CTS 2002 Designed by Government of India Ministry of Labour (D.G.E.&T.) CENTRAL STAFF TRAINING AND RESEARCH INSTITUTE EN Block,
More informationPneumatic tools and accessories. For trades and businesses.
Competence from passion. Pneumatic tools and accessories. For trades and businesses. Pneumatic tools Lightweight, stable construction and proven durability: effective tools for maximum productivity. Impact
More informationRAJIV GANDHI UNIVERSITY OF KNOWLEDGE TECHNOLOGIES BASAR Nirmal District, Telangana Ref: RGUKT-B/Proc/Elec,Maint/Q08/2018, dated
RAJIV GANDHI UNIVERSITY OF KNOWLEDGE TECHNOLOGIES BASAR Nirmal District, Telangana -504107 Ref: RGUKT-B/Proc/Elec,Maint/Q08/2018, dated. 17.12.2018 NOTICE INVITING QUOTATIONS Description : Supply of Electrical
More informationTECHNICAL BID T
` TECHNICAL BID T - 3878 Subject : Supply of Various Measuring Instruments for TMD-I,UKAI TPS Due on Date : At 3.30 P.M. (if Possible) EMD paid YES / NO EMD Demand Draft No. Date : OR SSI / NSIC Certification
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationNew Product Guide. See the new Sykes-Pickavant catalogue for further details! Service & Diagnostics. Engine CAT054
Product Catalogue See the new Sykes-Pickavant catalogue for further details! CAT054 New Product Guide Engine 314050 Petrol Compression Tester Set - for Deep Seated Plug Ports Page 11 314270 Page 13 314295
More informationTOOLS & EQUIPMENT. For More information:
TABLE OF CONTENTS Hand Tools...2-11, 16-21 Air Tools... 12-15 Material Handling...21 Abrasives... 22-24 Box Level 3 vials read level, plumb, and 45 Length Duty Level Measuring Tools 776001 24" 776002 48"
More informationSpecial Applications Require Special Tools
Index Routers.................. 102-103 Tappers..................... 104 Clinch Nut Tools.............. 106 Rivet Shavers................ 107 Skin Clamp Runners........... 108 Saws................... 109-110
More informationSMALL ENGINES II. Leader s Resource
SMALL ENGINES II Leader s Resource This project manual is a joint effort of the P.E.I. 4-H Council and the P.E.I. Department of Agriculture reprinted 2010 This is just a guide for leaders to follow. You
More informationDIN DIN WRENCH COMBINATION WRENCH COMBINATION WRENCH SET DOUBLE OPEN END WRENCH
1 WRENCH COMBINATION WRENCH DIN 3113 Size (inch) Chrome plated Polished jaws and rings Chrome-Vanadium steel Hardened and tempered KW0100334 ¼ 105 x 15 x 5 20 KW0100335 5 /16 125 x 20 x 5 30 KW0100336
More informationOVERHAUL. 1. REMOVE VALVE LIFTER HINT: Arrange the valve lifter in the correct order.
ENGINE MECHNICL 1473 OVERHUL 1415F02 1. REMOVE VLVE LIFTER HINT: rrange the valve lifter in the correct order. 75601 SST Wooden Block 75602 2. REMOVE VLVE HINT: rrange the valves, inner compression springs,
More informationStandard program. Tool cases. ...convincing solutions. Hard top tool cases, Leather tool cases
Standard program Tool cases Hard top tool cases, Leather tool cases...convincing solutions Assortment boxes, wallets, tool cases Metal tool boxes 5 compartments, complete black powder coating Tool case
More informationSTEERING AND SUSPENSION section 2
STEERING AND SUSPENSION section TRRT-PC piece Track Rod Removal Tool Kit Quality, kit designed for easy removal and installation of ball joints on track rods. Knurled handle provides extra grip and three
More informationCENTRAL UNIVERSITY OF JHARKHAND, RANCHI
CENTRAL UNIVERSITY OF JHARKHAND, RANCHI (A Central University established by an Act of Parliament in 2009) Ref no. CUJ/ P&S/EE/266/24 Dated:23-04-24 Sealed quotations are invited for the article enclosed
More informationSize 225mm. 425mm 760mm. Code. Code. Size 225mm SYK038600
STRAP WRENCH - HEAVY DUTY - RT12/273B STRAP WRENCH - 12005 Lever handle made from hardened heavy gauge steel Heavy duty bonded strap for extra strength Comfortable vinyl grip Ideal for use on automotive
More informationROLL ON SUMMER. Red Hot Deals $2200 $199. Tools to last a lifetime. Take 3 mates to the Test Cricket on us HOWZAT! NEW KIT! 274PC BONUS EXTRA DEEP KIT
Tools to last a lifetime ROLL ON SUMMER Sales Ends 31st Jan 2013 Red Hot Deals Take 3 mates to the Test Cricket on us HOWZAT! 2200 274PC NEW KIT! Available in 3 Colours 199 Metric & AF 10 Drw Premium Toolbox
More informationHAND TOOLS GUARANTEED TO PERFORM. Trusted by Professionals Since
GUARANTEED TO PERFORM Trusted by Professionals Since 1977 www.sunextools.com SUNEX TOOLS WARRANTY PROGRAM Sunex Tools Sockets, Wrenches, Screwdrivers, Specialty Tools, and Vises carry a LIFETIME warranty
More informationNEW FOR POLE POSITION DEALS PREMIUM QUALITY. PROFESSIONAL PRODUCTS. OCT JAN 2019 IN THIS ISSUE:
BUILTÊ ÊTOÊLASTÊA L PREMIUM QUALITY. PROFESSIONAL PRODUCTS. I F E T I M E OCT 2018 - JAN 2019 IN THIS ISSUE: Project Car Tool Storage Sockets & Accessories Spanners & Wrenches Fastening Tools Torque Control
More informationdial Bore gauge set deck Bridges 6'' stainless steel Calipers rocker stud remover 6'' digital Calipers top dead Center stop
415 dial Bore gauge set Used for checking cylinder bores, but is also useful for checking connecting rod bores for size, straightness or taper. Accurate to.0005. 15052 Dial Bore Gauge Set deck Bridges
More informationCHASSIS CONTENTS FRONT WHEEL 6-1 FRONT BRAKE 6-7 FRONT FORK 6-14 STEERING 6-18 REAR WHEEL AND REAR BRAKE 6-22
CHASSIS CONTENTS FRONT WHEEL 6- FRONT BRAKE 6-7 FRONT FORK 6-4 STEERING 6-8 REAR WHEEL AND REAR BRAKE 6-6 6- CHASSIS FRONT WHEEL REMOVAL AND DISASSEMBLY Remove the front brake caliper by removing the mounting
More informationCYLINDER HEAD OVERHAUL
ENGINE OVERHAUL PROCEDURES - GENERAL INFORMATION -2011 Mercedes-... Page 1 of 20 CYLINDER HEAD OVERHAUL * PLEASE READ THIS FIRST * Examples used in this article are general in nature and do not necessarily
More information1998 Saab 900 SE ENGINES Saab 2.0L & 2.3L 4-Cylinder
Removal & Installation See VALVE SPRINGS under CYLINDER HEAD under OVERHAUL. CAMSHAFT Removal 1. Rotate crankshaft until "0" mark on flywheel aligns with timing mark on flywheel cover. Remove inspection
More information(USA website) GEARWRENCH is a registered trademark of EASCO Inc., an Apex Tool Group Company.
PRODUCT CATALOGUE GearWrench Hand Tools are warranted for Life to be free of defects in material and workmanship. Carrying cases, pouches, accessory bits and consumable products, if any, are not covered
More informationGeneral Equipment. Content - Section 8. Grease Nipples. Grease Equipment. Garage Equipment. Coils, Plugs & Sockets. Electrical Cable.
8 General Equipment Content - Section 8 Grease Nipples Grease Equipment Garage Equipment Coils, Plugs & Sockets Electrical Cable Test Kits Tube Cutter Flaring Tool 8.1 General Equipment Grease Nipples
More informationUnited Nations Development Programme
United Nations Development Programme - Facilitates owned by the company for training tractor operators, details of the trainings the company normally offer to tractor operators (The cost of the training
More informationBIG SALE FACTORY. April May June 2008
BIG FACTORY SALE April May June 2008 Model: SP50109 157pc Tool Kit with 2 Drawer Trolley 870mm x 490mm x 1330mm Maxi Drawers Featuring 405mm Depth All Sockets & Socket Accessories come in Hi Density Foam
More informationCOLOUR OPTIONS AVAILABLE: Black/Green P/N: SP50177 Black/Blue P/N: SP50176 Black P/N: SP EACH. Hex & TORX keys. Hammer & foldback knife
1ST NOVEMBER - 31ST JANUARY 20 ISSUE 30% WIDER 407PC METRIC/SAE SUMO SERIES TOOL KIT 853(W) x 459(D) x 1406(H) 30% WIDER 406PC METRIC/SAE SUMO SERIES TOOL KIT 841(W) x 445(D) x 462(H) 25 6-26mm & 1/4-1
More informationElectricity. 3 or 4 Member Team
Electricity 3 or 4 Member Team IMPORTANT NOTE Please read thoroughly the General CDE Rules Section at the beginning of this handbook for complete rules and procedures relevant to State FFA Career Development
More informationElectricity. 3 or 4 Member Team
Electricity 3 or 4 Member Team IMPORTANT NOTE Please read thoroughly the General CDE Rules Section at the beginning of this handbook for complete rules and procedures relevant to State FFA Career Development
More informationTECHNICAL BID T 3610
TECHNICAL BID T 3610 Supply of Various Rubber Items at GSECL TPS Ukai. Due on At 3.30 P.M. (if Possible) EMD paid YES / NO EMD D. D. No. Date : OR SSI / NSIC Certification Number : Duly Notarized : YES
More information