Reference: FT MET-en Date: 06/04/18 Revision: 4 Page: 1 of 12 T084 / DIN 84 T963 / DIN 963 T965 / DIN 965
|
|
|
- Theodora Small
- 5 years ago
- Views:
Transcription
1 Reference: FT MET-en Date: 06/04/18 Revision: 4 Page: 1 of 12 T084 / DIN 84 T963 / DIN 963 T965 / DIN 965 T985 / DIN 7985 D933 / DIN 933 D912 / DIN 912 D603 / DIN 603 D934 / DIN 934 D985 / DIN 985 D125 / DIN 125 D127 / DIN 127 D9021 / DIN 9021 CHARACTERISTICS Screws for mechanical fixings. Metric thread. Requires pre-drilled threading, or the use of a metric nut. Variety of sizes, heads and lengths: flexibility in installation. Zinc-plated coating. APPLICATIONS Screws for mechanical fixings.
2 Reference: FT MET-en Date: 06/04/18 Revision: 4 Page: 2 of RANGE ITEM CODE STANDARD PHOTO HEAD RECESS MATERIAL 1 T084 DIN 84 Cylinder Slot Steel class 4.8 UNE EN ISO 2 T963 DIN 963 Countersunk Slot Steel class 4.8 UNE EN ISO 3 T965 DIN 965 Countersunk Ph Steel class 4.8 UNE EN ISO 4 T985 DIN 7985 Crowned Ph Steel class 4.8 UNE EN ISO 5 D933 DIN 933 Hexagon Hexagon Steel class 8.8 UNE EN ISO 6 D912 DIN 912 Cylinder Allen Steel class 8.8 UNE EN ISO 7 D603 DIN 603 Rivet with square neck Tamperproof Steel class 4.8 UNE EN ISO 8 D934 DIN 934 Hexagon Steel hardness > 140 HV. Coating: zinc-plated: zincplated 9 D985 DIN 985 Hexagon Steel hardness > 140 HV. Coating: zinc-plated: zincplated 10 D125 DIN Steel hardness > 140 HV. Coating: zinc-plated: zincplated 11 D127 DIN Steel class 6 UNE EN Coating: zinc-plated 5 µm s/iso D9021 DIN Steel class 6 UNE EN Coating: zinc-plated 5 µm s/iso 4042
3 Reference: FT MET-en Date: 06/04/18 Revision: 4 Page: 3 of CHARACTERISTICS 2.1 DIN-84 Slotted screw cylindrical head Slot Cylindrical head Metric SIZE M3 M4 M5 M6 Ød2: head diameter [mm] k: head thickness [mm] n: slot width [mm] t: slot depth [mm]
4 Reference: FT MET-en Date: 06/04/18 Revision: 4 Page: 4 of DIN-963 Slotted screw countersunk head Slot Countersunk Head Metric SIZE M4 M5 M6 M8 Ød2: head diameter [mm] k: head thickness [mm] n: slot width [mm] t: slot depth [mm]
5 Reference: FT MET-en Date: 06/04/18 Revision: 4 Page: 5 of DIN-965 Screw countersunk head - Ph socket Ph Countersunk head Metric SIZE M3 M4 M5 M6 Ød2: head diameter [mm] k: head thickness [mm] Ph socket Drill bit code PUPHC01 PUPHL01 PUPHC02 PUPHL002 PUPHC02 PUPHL02 PUPHC03 PUPHL03
![head diameter [mm] 6 8 10 12 k: Head thickness [mm] 2.4 3.1 3.8 4.6 v [mm] 1.6 2.](/docs-images/89/101158462/images/6-5.jpg "0 2.5 3.")
6 Reference: FT MET-en Date: 06/04/18 Revision: 4 Page: 6 of DIN-7985 Dome head screw - Ph socket Ph Dome head Metric SIZE M3 M4 M5 M6 Ød2: head diameter [mm] k: Head thickness [mm] v [mm] Ph socket Drill bit code PUPHC01 PUPHL01 PUPHC02 PUPHL002 PUPHC02 PUPHL02 PUPHC03 PUPHL03
![10 13 17 19 22 24 27 30 k: head thickness [mm] 4 5,3 6,4 7,5 8,8 10 11,5](/docs-images/89/101158462/images/7-5.jpg "12,5 e: distance between apexes [mm] 10,89 14,20 18,72 20,88 23,91 26,17")
7 e TECHNICAL DATASHEET Reference: FT MET-en Date: 06/04/18 Revision: 4 Page: 7 of DIN-933 Metric thread screw hexagonal head s: distance between faces Hexagonal Hexagonal head Metric SIZE M6 M8 M10 M12 M14 M16 M18 M20 [mm] k: head thickness [mm] 4 5,3 6,4 7,5 8, ,5 12,5 e: distance between apexes [mm] 10,89 14,20 18,72 20,88 23,91 26,17 29,56 32,95 Torque wrench º s k
![head diameter [mm] 7 8,5 10 13 16 s: distance between recess faces [mm] 3 4 5 6](/docs-images/89/101158462/images/8-3.jpg "8 k: head thickness [mm] 4 5 6 8 8 Installation Wrench Allen 3 Allen 4 Allen 5")
8 Reference: FT MET-en Date: 06/04/18 Revision: 4 Page: 8 of DIN-912 Allen screw Allen Cylindrical head Metric SIZE M4 M5 M6 M8 M10 Ødk: head diameter [mm] 7 8, s: distance between recess faces [mm] k: head thickness [mm] Installation Wrench Allen 3 Allen 4 Allen 5 Allen 6 Allen 7 Ødk k s
9 s c TECHNICAL DATASHEET Reference: FT MET-en Date: 06/04/18 Revision: 4 Page: 9 of DIN-603 IN-603 screw and DIN-934 washer Rivet head Metric SIZE M5 M6 M8 M10 M12 Ødk: head diameter [mm] k: head thickness [mm] 3 3,5 4,5 5 6,5 a: square thickness [mm] 3, s [mm] 5 6,2 7,8 9,85 11,6 c [mm] a Ødk k
10 Reference: FT MET-en Date: 06/04/18 Revision: 4 Page: 10 of DIN-125 Flat washer Steel Zinc-plated coating Available in A2 stainless SIZE M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 Ød1: interior diameter Ød2: exterior diameter 4,3 5,3 6,4 8,4 10,5 13,0 15,0 17,0 19,0 21,0 23,0 25,0 28,0 31,0 34,0 37, h: thickness 0,8 1 1,6 1,6 2 2,5 2, DIN-127 Grower spring washer Steel Zinc-plated coating SIZE M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M36 Ød1: interior diameter Ød2: exterior diameter h: smooth width 4,1 5,1 6,1 8,1 10,2 12,2 14,2 16,2 18,2 20,2 22,5 24,5 27,5 30,5 36,5 7,6 9,2 11,8 14,8 18,1 21,1 24,1 27,4 29,4 33,6 35, ,2 58,2 2 2,6 3,3 4,3 4,8 5,4 6,5 7,6 7,7 8,7 8,7 10,9 10,9 13,1 13,1 s: thickness 0,9 1,2 1,6 2 2,2 2,5 3 3,5 3,
11 Reference: FT MET-en Date: 06/04/18 Revision: 4 Page: 11 of DIN-9021 Wide flat washer Steel Zinc-plated coating SIZE M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 Ød1: interior diameter Ød2: exterior diameter 4,3 5,3 6,4 8,4 10,5 13,0 15,0 17,0 20,0 22,0 24,0 26, h: thickness 1 1,2 1,6 2 2, DIN-934 Hexagonal nut Steel Zinc-plated coating Available in A2 stainless SIZE M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 s e 7,7 8,8 11,1 14,4 18,9 21,1 24,5 26,8 29,6 32,9 35,0 39,6 45,2 50,9 55,4 60,8 m 3, , Wrench
12 Reference: FT MET-en Date: 06/04/18 Revision: 4 Page: 12 of DIN-985 Self-locking nut Steel Zinc-plated coating SIZE M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 s e 7,7 8,8 11,1 14,4 18,9 21,1 24,5 26,8 29,6 32,9 35,0 38,6 45,2 50,9 h , Wrench TORQUE FOR SCREWS For steel screws and nuts the standard UNE establishes specific parameters for correct installation. This standard is aimed to indicate the torque value needed in order to install, with dynamometric tools that don t produce any vibrations nor impacts, the standard Steel screw range, on rigid supports and only demanded by axial with constant value. For joints between zinc plated materials, the coefficient of friction established by this standard is =0,14. Torque moments for each size are specified in the table below. TORQUE [da N m] (con =0,14 ) ITEM M3 M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 T084 0,063 0,14 0,29 0,49 1,2 2,4 4,1 6, ,5 T963 0,063 0,14 0,29 0,49 1,2 2,4 4,1 6, ,5 T965 0,063 0,14 0,29 0,49 1,2 2,4 4,1 6, ,5 T985 0,063 0,14 0,29 0,49 1,2 2,4 4,1 6, ,5 D933 0,12 0,27 0,54 0,93 2,2 4,5 7,7 12, D912 0,12 0,27 0,54 0,93 2,2 4,5 7,7 12, D603 0,063 0,14 0,29 0,49 1,2 2,4 4,1 6, ,5 SIZE
Metrics
Metrics www. E-Mail: orders@ 1-800-782-6342 8530 K Street Omaha, NE 68127 Phone: (402) 592-4988 Fax: (402) 592-9271 905 East Kansas Ave. Arkansas City, KS 67005 Phone: (620) 442-7526 Fax: (620) 442-7583
A global range. Extra hard for extra performance: the extra hard Bosch bits. Equipped for any application
Screwdriving 146 Screwdriving Overview Bosch Accessories 11/12 A global range Bosch shows how it s done. With a universal and comprehensive screwdriver bit range which has a bit to suit every application
GTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
INDEX METRIC SOCKET SCREWS. Page CAP HEAD SCREWS TORQUE INFORMATION 3
INDEX METRIC SOCKET SCREWS Page CAP HEAD SCREWS TORQUE INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M1.6 - M5 6-7 M12 - M18 8 M20 - M27 9 M30 - M42 10 FINE PITCH CAP - M16 11 LOW HEAD SCREWS TECHNICAL INFORMATION
Any reproduction, even partial, is allowed only by written permission by Rollco.
EASYSLIDE Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to make changes
Technical Notes To DIN 933, ISO 4017.
Hexagon Head Bolts wit tread up to ead, DIN 933, 6101 d l A/F A0013.A6 6101 To DIN 933, ISO 4017. Order No. Tread l A/F Finis A0013.050-020-A6-00 M 5 20 3,5 8 unfinised A0013.050-025-A6-00 M 5 25 3,5 8
Rotary inlets for pressurised oil, compressed air
Rotary inlets for pressurised oil, compressed air Product data sheets Rotary inlets for pressure oil, single channel 0086-010-size-160 9.03.00 Rotary inlets for pressure oil, two- channel 0088-226/326-size-010040
Inserting Tools for Screwdrivers
Screwdriving Technology Automation Air Motors Air Tools Inserting Tools for Screwdrivers nbits nsockets nfinders nbit holders With the longest lifetime and highest wear resistance combined with the best
Dynamic Elements Linear Slides Mechanical Drive Elements Accessories for Mechanical Drive Elements
8 Dynamic Elements Mechanical Drive Elements Accessories for Mechanical Drive Elements The Dynamic Elements product group of the MB Building Kit System contains components which enable precise linear movement.
For advanced drive technology CLAMPEX. Shaft-hub-connection. KTR Precision joints CLAMPEX
technology CLAMPEX Shaft-hub-connection CLAMPEX KTR Precision joints 227 technology Table of contents Page Brief information 228 Selection and calculation 25-255 CLAMPEX -Selection Shaft diameter = d 0
K17.13 DOOR STAYS K17 DOORS
K17 DOORS K17.13 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Door stays n 684(C)-500...K17.13.03 1.1.
General Information. Installation Information Design Information Material Information Ordering Information
General Information General Information PTBPRO Throughbolt ProDUCT DESCRIPTION The PTBPRO is a fully threaded, torque controlled, wedge expansion anchor which is designed for consistent performance in
1) Retractable nipple with centering 2) Retractable nipple with equalizer 3) Retractable nipple without centering
The critical contrasts between "stable clamping" and the required "flexibility for heat expansion" have been ideally solved with the Stark zero point mounting system. There are 3 different retraction nipples:
AF / AFR Series. AFR Series
AF / AFR Series haracteristic Highlights Equipped with solid uncaged needle roller bearings, provides maximum contact points to increase stiffness and generates high output torque. True helical gear design
socket bits Sonic offers you a wide variety of socket bits pozidrive slotted slotted one piece
socket bits Sonic offers a complete range of different socket bits. The socket bits are made of outstanding chrome vanadium quality and meet or exceed din standards. these sonic socket bits have Also a
FireFox. FireFox The new one. FireFox The reliable one. FireFox The versatile one. FireFox The simple one. FireFox The fast one
FireFox Most blind rivet nut setting devices are lift-controlled, the others are setting force-controlled The FireFox from GESIPA represents a new generation of blind rivet nut setting device which allows
s_enn Exterior Stainless Steel Shading System by Draper
Installation Instructions s_enn Exterior Stainless Steel Shading System by Draper Caution 1 Never push the bottom rail of the system up by hand. This can cause irreparable damage. Access equipment must
RECA VISO Assortments
Clear plastic lids: Easy viewing of product and stock. Ergonomically designed handle: comfortable to carry and use. Stackable without slipping: the base and the lids fit into one another. RECA VISO Cabinets
Standard Parts for Mould Making
Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves
Installation, Operating Instructions and Replacement Parts Installation video available at
Installation, Operating Instructions and Replacement Parts Installation video available at www.kool-shield.com/support/ Made in the USA By Humboldt Specialty Manufacturing Co. www.kool-shield.com Revision
C13.10 CHRONO LOCKCASE AND PERIMETER LOCKING SET C13 SIDE HUNG WINDOWS
C13 SIDE HUNG WINDOWS CHRONO LOCKCASE AND PERIMETER LOCKING SET 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
Standard with cone bushing. Backlash-free Safety Clutch
EAS -Compact ratchetting clutch/synchronous clutch The Backlash-free Safety Clutch for Standard with cone bushing Packaging Machinery Machine Tools Paper Machinery Indexing Drives Servo Motors EAS -NC
SIT-LOCK self locking elements
self locking elements Advantages of on the shaft-hub connection compared with traditional systems Easy assembly and disassembly Both actions take place by locking and unlocking the clamping screws with
NUTS, WASHERS, SCREWS & STUDS WDS SECTION 8 - NUTS, WASHERS, SCREWS & STUDS
SECTION 8 - NUTS, WASHERS, SCREWS & STUDS NUTS, WASHERS, SCREWS Hexagon (Standard) Nuts M4-M2 Collar Nuts Spherical Seating Nuts Acorn Nuts Coupling Nuts Quick Action Nuts Standard Washers Heavy Duty Jig
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION Brand C.K Product Range Sockets, Wrenches and Sets Catalogue number As listed Date 16/03/2009 Range Description A range of professional quality Sockets, Wrenches and sets Features
INSTALLATION & OWNER S MANUAL
Rev. B, p. 1 of 25 INSTALLATION & OWNER S MANUAL POLARIS RANGER RCS (for models XP or HD) (for model years 2009-) cab without doors kit (p/n 1POLRCWD) cab with doors kit (p/n 1POLRC) doors only kit (p/n
For applications with high axial play. For applications with reduced mounting space
Fig. Example of use Use : Pitch circle diameter Suitable for encoders Page high axial play 8.000.4K00.0000 cylindrical pin Long spring element 0 mm A020, A02H 9080, 908 262 reduced mounting space 8.000.4J00.0000
14 Track runner bearings
14 Track runner bearings Designs and variants............... 1100 Cam rollers... 1100 Single row cam rollers............. 1100 Double row cam rollers............ 1100 Support rollers... 1101 Support rollers
How to select your fastening screwdrivers?
Fastening Pistol shape for horizontal applications or for better controllability Straight shape for vertical applications How to select your fastening screwdrivers? Clutch Type IMPACT (rocking dog) Good
Profile series I-40. System kit Profile series I-40
Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000
Indexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
Track Rollers/ Cam Followers
Track Rollers/ Cam Followers Page Nomenclature...................................... 460 Introduction....................................... 462 Identification....................................... 462
MR 25 to 200 : Worm wheel and screw kinematics. MR 400 to 1600 : Yoke kinematics. Output torques up to Nm. External coating.
Type series booklet 8505.12/12--10 MR manual actuators MR 25 to 200 : Worm wheel and screw kinematics MR 400 to 1600 : Yoke kinematics MR 400 to 1600 MR 25 to 200 Output torques up to 16 000 Nm Applications
MULTI-MONTI -plus THE NEW MULTI-MONTI WITH THE BIG PLUS
MULTI-MONTI -plus THE NEW MULTI-MONTI WITH THE BIG PLUS MMS-plus MULTI-MONTI -plus PRODUCT INFORMATION New Standard: hexagon head with combined washer Optimized concrete thread for higher efficiency More
CLAMP AND FLANGE COUPLINGS
POWER TRANSMISSION RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS 2 CLAMP AND FLANGE COUPLINGS RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS FLANGE COUPLINGS DIN 116 Flange couplings are torsionally stiff, particularly
EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
For advanced drive technology CLAMPEX. Shaft-Hub-Connection. KTR Precision Joints CLAMPEX
technology CLAMPEX Shaft-Hub-Connection CLAMPEX KTR Precision Joints 07 technology Table of contents Page Brief information 09 Selection and calculation -5 CLAMPEX -Selection Shaft diameter = d 0 10 0
USE-USU. Steel independent chucks. Steel independent chucks USE-USU
USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually
8 (800) (звонок бесплатный) Length tolerances for shafts to DIN 7168, medium series.
2 Guiding systems Fig 20 SKF precision shafts ( fig 20 ) can be supplied either as solid or hollow shafts. The solid shafts are available in all dimensions required to fit SKF linear ball bearings; the
SPRING LOADED DEVICES
Spring Loaded Devices SPRING LOADED DE VICES Plungers: Plungers, Spring...38 39 Plungers, Spring, Metric... 40 41 Plungers, Shortie Spring... 42 Plungers, Shortie Spring Stainless Steel... 42 Plungers,
WOC & WOC Top & Back Installation Instructions
Shown with optional Sun Roof WOC-900500-2 & WOC-900501-2 Top & Back Installation Instructions Install Order! Heater Door System Wiper on to Windshield Windshield Rear Panel Top Panel Tools needed: 5/16
Material: Hinge Parts: zinc die, matt chrome plated, or zinc die, matt black. Pin: stainless steel Nut plate: steel, zinc plated
4-249 Hinge Pr01 180 Small elegant hinge. 180 Opening. Adjustments are possible with respective bores provided. The nut plate can be mounted in different ways, according to the application. zinc die, matt
4 YEAR WARRANTY WARRANTY STIPULATIONS: SEND CORRESPONDENCE TO: DPP INC. OFFICE USE ONLY : SERIAL NO.
4 YEAR WARRANTY SERIAL NO. MANUFACTURED DATE: WARRANTY STIPULATIONS: Copy of sales receipt mailed with this form All warranty information, located on back, completely filled out FASS products and/or paperwork
Locking Assemblies Shrink Discs Rigid Couplings.
M I N I Locking Assemblies Shrink Discs Rigid Couplings www.mav.it our company We are an Italian company world renowned for our creativity and ethics. Established in 1989 we have rapidly built a reputation
CANVAS DOOR KIT P/N , APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com.
CANVAS DOOR KIT P/N 2882902, 2882903 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain
INOX PrOgram made by eisele
EISELE INOXline Program Stainless steel connection solutions Quality solutions Made by EISELE INOX 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 5.000
IMPERIAL TOOLS GD_PG_$KT-K10-$KP-ZOLLWERKZEUG-$ :00:49
IMPERIAL TOOLS 5 IMPERIAL TOOLS 1 2 3 4 page 270-272 5 6 7 8 page 273-282 9 10 11 12 page 282-285 13 14 15 16 17 page 285 i CONVERSION TABLE FROM INCHES TO MILLIMETRES conversion from mm to inch: 69,850
Selection Tool. on the Internet at in the section MÄDLER -Tools. Other sizes and designs on request. Connecting Shafts Page 766
Couplings Overview Friction Clutches Friction Clutches Type B Axial Arrangement Friction Clutches Type C Transversal Flexibility Sliding Hubs with Torsionally-Flexible Coupling Multi-Disk Friction Clutches
3500 WINCH KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. P/N Rev 01 06/15 Page 1 of 11
3500 WINCH KIT P/N 2881671 APPLICATION RZR XP 1000 ALL MODEL YEARS, 900 MY15 AND NEWER BEFORE YOU BEGIN Before you begin, read these instructions twice and check to be sure all parts and tools are accounted
Factory Five Racing, Inc. 818 Kit Assembly manual revision 1i update
Factory Five Racing, Inc. 818 Kit Assembly manual revision 1i update Pedal box...1 Cable Accelerator Pedal (2002-2005)...2 OEM seats...7 Windshield... 13 Center console... 19 Pedal box Attach the pedal
P&N/SUTTON. A trusted name, serving Canadian industries since
/SUTTON A trusted name, serving Canadian industries since 1939 p&n/sutton Adjustable Button Dies 8 Button Die Holders 9 Centre s 2 Hand Taps (Chrome Steel) 4 Hand Taps (Ground Thread High Speed Steel)
Throttle and throttle check valve
Throttle and throttle check valve RE 7/. Replaces:. / Types FG and FK Size to Component series X Maximum operating pressure bar Maximum flow 4 l/min H747 Table of contents Contents Page Features Ordering
Road Tunnel Fire Protection. with Alvenius Piping Systems
Road Tunnel Fire Protection with Alvenius Piping Systems EN 2 Alvenius piping systems where top safety is paramount Alvenius supplies reliable and safe steel piping for fire protection in road tunnels.
Blue-Tip Screwbolt BT
Blue Tip Screwbolt hex head, white zinc plating BT Blue Tip Screwbolt hot dipped galvanised, white zinc plating BT-HDG Blue Tip Screwbolt hex head, stainless steel BT-SS Blue Tip Screwbolt countersunk
Presents a USER S Guide and PARTS MANUAL for; KEITH Clean Sweep System
Wilkens Industries 184 South County Road 22 Morris, MN 56267 320-589-1971 800-833-6045 320-589-1974fax Presents a USER S Guide and PARTS MANUAL for; KEITH Clean Sweep System ORDER PARTS via email 24 Hours
K81-DD FIRE HYDRANT GUARDIAN AWWA C502 NSF YEARS. For Generations CERTIFICATIONS ISO 9001 ISO BS OHSAS
GUARDIAN K81-DD FIRE HYDRANT CERTIFICATIONS ISO 9001 ISO 14001 BS OHSAS 18001 AWWA C502 NSF 61 140 YEARS WWW.KENNEDYVALVE.COM C For Generations COMPONENTS AND FEATURES A B C E D F G H J K M L N P Q S R
Fastener Drive & Screwdriving
www.irwin.com Fastener & Screwdriving tools Manufactured for Strength and value industry-specific Screwdriver Bits Fastener heads are often designed for the particular needs of specific applications and
Our Most Important Connection is with You. SECTION 17. Tooling & Accessories R280 / R282
SECTION 17 Tooling & Accessories R280 / R282 Contents Joule effect soldering devices... 17-4 Stripping tools...17-4 and 17-7 Point gauges... 17-4 Soldering... 17-5 Installation tools...17-5 to 17-6 Cassettes...
HMV/HSV. Manual selector valve. 4-port valve CONTENTS
4-port valve Overview The / series manual selector valves are 4-port valves with a sliding valve method for the main valve. Suitable for operating cylinders of φ0 to φ0. Features Simple ease of operation
16 Bearing accessories
Rolling bearings 16 Bearing accessories Adapter sleeves... 1270 Designs and variants... 1270 Basic design... 1270 Variants for oil injection... 1270 Variants for CARB toroidal roller bearings... 1273
SWING DOOR SOFT ENCLOSURE (part# 16733)
800-643-7332 americanlandmaster.com This kit is for use with all fullsize, 2 passenger ALM utility vehicles. SWING DOOR SOFT ENCLOSURE (part# 16733) NOTE TOOLS REQUIRED Drill 1/4 Drill Bit 7/16 Wrench
Messing. screw-in connectors
Messing screw-in connectors 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively underline
Operating Manual. Futek Rotary Torque Sensors. TRD, TRH & TRS Series
Operating Manual Futek Rotary Torque Sensors TRD, TRH & TRS Series INDEX 2. APPLICATION AND KEY FEATURES...3 3. DESCRIPTION... 3.1 MECHANICAL DESIGN... 4 3.2 ELECTRICAL DESIGN... 5 3.3 ROTATION ANGLE MEASURING
SAB 202 Screw compressor units. S pa re parts m an ual
SAB 202 Screw compressor units S pa re parts m an ual en 1 Spare parts list for SAB 202 Pos Designation No Part no Complete compressor LF, aut Vi 4161059 Complete compressor LF, man Vi 4161060 Complete
RINGFEDER KEYLESS SHAFT/HUB CONNECTIONS LOCKING ASSEMBLIES TM LOCKING ELEMENTS TM SHRINK DISCS W-300-2
RINGFEDER KEYLESS SHAFT/HUB CONNECTIONS LOCKING ASSEMBLIES TM LOCKING ELEMENTS TM SHRINK DISCS W-300-2 1 Ringfeder Corporation Catalog W-300-1 Shaft-Hub Locking Devices Ringfeder unique frictional, keyless
CLAMPEX KTR 603 Operating/Assembly instructions
1 of 9 The CLAMPEX clamping set is a frictionally engaged, detachable shaft-hub-connection for cylindrical shafts and bores without feather key. Table of contents 1 Technical data 2 2 Advice 6 2.1 General
PFW 6855 Installation Guide Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d Installation, Installatie gids
Installation Guide Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d Installation, Installatie gids Max: 227kg/500lbs MOUIN_PFW6855_V01 Refer to Step: Included components 3 10
2008~2010 Polaris RZR 800* Cab Enclosure Kit Slam latch hardware
Owner s Manual Model: Polaris RZR * 2008~2010 Polaris RZR 800* Cab Enclosure Kit Slam latch hardware Caution: Before using this product, read this manual and follow all safety instructions. Safety Instructions
Specifications. Standard Stroke Table. Bore size (mm) Number of axes 200, 300, 400, 500,
Series REH Specifications Bore size mm Fluid ction Maximum operating pressure Minimum operating pressure Proof pressure mbient and fluid temperature Piston speed ubrication Stroke length tolerance Piping
Tooling CONTENTS PAGE
CONTENTS PAGE Joule effect soldering devices... 3 Stripping tools...4-6 Pointer gauges... 7 Soldering & assembly tools...8-10 Installation tools...11-12 Tool kits for semi-rigid and flexible cables...13-22
Sempell High Pressure Stop Valves Model VA500 (ASME)
7 Sempell High Pressure Stop Valves Designed for the isolation and control of high temperature and high pressure systems, this multipurpose globe valve can be used in a wide variety of applications. Features
POLY TIP-DOWN WINDSHIELD KIT
POLY TIP-DOWN WINDSHIELD KIT P/N 2881919 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please
PIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
EVO-1162 EVO Tailgate Tire Carrier
EVO-1162 EVO Tailgate Tire Carrier Bill of Materials EVO-1162 Tailgate Tire Carrier Part number Description Quantity EVO-12161 EVO Tailgate Tire Carrier 1 EVO-12162 Bolt Plate 1 EVO-12163 Wheel Mount 1
ACE LOCK Milling Chucks
ACE LOCK Milling Chucks Run-out accuracy: 10 µm/0.0004 at the distance of 100 mm/4.00 from the end of the holder. Milling Chucks Spiral slits are precision-machined with a laser securely hold the cutter
Lindapter Fixing. Product Guide BAPP. G r o u p o f C o m p a n i e s
Lindapter Fixing Product Guide Steelwork Fixings ype A Nose Recess ype A Malleable iron, bright zinc plated / hot dip galvanised Clamping Area K Skirt ail Steelwork clamp with recessed top to hold the
PRO LAUNCH INSTALLATION INSTRUCTIONS
12-339 4130 PRODUCT DRIVE, CAMERON PARK, CA 95682 PH: 1.530.642.9488 VIEW INSTALLATION VIDEO AT www.worksconnection.com/prolaunch/ 12-339 PRO LAUNCH INSTALLATION INSTRUCTIONS We at Works Connection Inc.
Process Connections for Dial Thermometers
sales@jumo.co.uk Data Sheet 608730 Page 1/7 Process Connections for Dial Thermometers Special features Temperature probes (TF) Process s (TA) Thermowell (SH) Temperature probes (TF) (S 1 min. 25 mm for
INDEX EASY RAIL: THE SOLUTION IS EASY...D4 EXAMPLES OF LOAD CAPACITIES...D5 ORDER CODES...D6 MOUNTING EXAMPLES...D7 TECHNICAL DATA...
INDEX EASY RAIL: THE SOLUTION IS EASY...D4 EXAMPLES OF LOAD CAPACITIES...D5 ORDER CODES...D6 MOUNTING EXAMPLES...D7 TECHNICAL DATA...D8 STANDARD CONFIGURATIONS...D10 VERIFICATION UNDER STATIC LOAD...D12
B Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
TS9356 PKT 90/119. Surface applied door closer. Installation instructions: Pocket door track mount in 90 /119 pocket (Closer on wall)
TS96 PKT 90/9 Surface applied door closer Installation instructions: Pocket door track mount in 90 /9 pocket (Closer on wall) TABLE OF CONTENTS Closer overall Technical specifications Door templates Closer
L Standard Parts for Mould Making
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Document# 19-0038 2004+ Lotus Elise (Series 2) Rear Clamshell Removal Kit Safely support the vehicle. This is a two-person job. Allow 1 to 2 hours for initial disassembly. Have
E C O L O G I C A L C O O L E R S ECON PARTS CATALOGUE
E C O L O G I C A L C O O L E R S ECON PARTS CATALOGUE www.viesa.ca / 1-888 438-8444 IMPORTANT Installation requires an experienced mechanic with specific knowledge in the installation of the VIESA Ecological
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS ----1075 North Ave. Sanger, CA 93657-3539 toll free: 800-445-3767 web: www.belltechcorp.com---- 6636 HANGER and SHACKLE KIT 95 99 CHEVY TAHOE / GMC YUKON Congratulations! You
2011 Cadillac CTS Coupe EGX Exhaust Tip & Rear Valance Mesh Accent Kit Part #: Complete E
BILLET GRILLS IMPORTANT: PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE! 2011 Cadillac CTS Coupe EGX Exhaust Tip & Rear Valance Mesh Accent Kit Part #: Complete 5122-1900-11E TOOLS REQUIRED Automotive
Swivel Joint Heads (Basic Unit)
Swivel Joint Heads (Basic Unit) Design Configuration Weld edge preparation according to DIN 2559 or ANSI B16.25 Grease nipple/ ball Lifetime greasing Grease nipple only on request Stator Rotor Internal
ABOUT KJN ALUMINIUM PROFILES
P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
Assembling the Front Panel
CHAPTER 4 Revised: September 22, 2009, This chapter describes how to assemble the front panel that covers the lower half of the Cisco TelePresence System 1000 and includes the following sections: Parts
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS 6525 REAR AXLE FLIP & HANGER KIT 5 OR 6 INCH LOWERING 14&UP CHEVROLET SILVERADO / GMC SIERRA 1500 Thank you for being selective enough to choose our high quality BELLTECH PRODUCT.
HT hypoid bevel gear boxes
HT hypoid bevel gear boxes Solid and Hollow Shaft Design Cycloid gearboxes Planetary gearboxes evel gearboxes Planetary bevel gearboxes Hypoid gearboxes Gear technology Eppinger hypoid gear boxes The compact
JC BALL VALVES ASSEMBLY AND MAINTENANCE MANUAL
JC BALL VALVES ASSEMBLY AND MAINTENANCE MANUAL DOC. MMM1500I SBF AND SBR SERIES (Split body, Semi trunnion, Full and Reduced bore) Figs. 1510, 1516, 1525, 1540, 1515, 1530, 1615 & 1630 FULL BORE PN 10
Conduit Rigid Entry Boots
Conduit Rigid Entry Boots REB-C-0075, REB-C-R-0075, REB-C-0100 & REB-C-R-0100 Installation Instructions Body Flat Gaskets Clamp Plate Conduit Seal Compression Nut Follow all federal, state and local laws
Split plummer block housings SED 30, 31, 32 and 39 series
Split plummer block housings SED 30, 31, 32 and 39 series Bearing types Spherical roller bearings Bearing dimension series 30, 31, 32 and 39 Shaft diameter range 430 to 900 mm Typical shaft-bearing combinations
...components in motion. Easy Rail
...components in motion Easy Rail Easy Rail Introduction The Easy Rail family have a compact cross-section and low-friction movement. Robust and Long Service Life Easy Rail s range of cross-sectional rail
Torque overview for series 10 / 22 / 35 / 40 / 51
Content 1. General 3 2. General screw torque for metric screws 4 3. series 10 plug locking sleeve 5 3.1 series 10 fastening / jam nut 5 3.2 s series 10 locking sleeve for GISMA endbells 6 3.3 s series
Hydraulic-Type Grease Fittings SAE
SAE J-534 Hydraulic-Type Grease Nipples Type SH1N - The standard head-ø is 6.6 (+/- 0.3) mm / 0.26" (+/- 0.012"). - standard versions according to SAE are made of steel, case-hardened, zinc-plated and
Functional Description
4/2 Way Solenoid Operated Directional Control Valves Spool SD2E-A4 Type 3/4-16 UNF p max 350 bar (5076 PSI) Q max 30 L/min (7.9 GPM) 01/2005 4/2 Way cartridge valves solenoid operated spool directed Manual