WALL SPACER / HEAVY DUTY CHAIR SPACER / PLASTIC CONE & PLUG LONG PUN ENTERPRISE PTE LTD SPACER SPECIALIST SDN BHD

Transcription

1 WALL SPACER / HEAVY DUTY CHAIR SPACER / PLASTIC CONE & PLUG LONG PUN ENTERPRISE PTE LTD SPACER SPECIALIST SDN BHD FORMWORK PRODUCT CATALOGUE

2 WALL SPACER, CONES & PLUG PCT 15 - PCT 21.5 / 15mm mm PC 12 - PC 21.5 / 12mm mm PLASTIC CAP (SPRING TAIL) The development of this range of different sizes of caps are for use of covering up ends of the Electrical PVC Pipe after dismantling of the formwork. It prevent foreign articles from entering the Pipes during plastering. *PLASTIC CAP (SPRING TAIL) PC 12 PC 15 PC 20 PC 21.5 PC 25 PCT 15 PCT 18.5 PCT mm 15.0mm 20.0mm 21.5mm 25.0mm 15.0mm 18.5mm 21.5mm ELECTRCAL PIPE HOLDER Electrical Pipe Holder is developed for holding of Electrical PVC Pipes in place in the formwork. It prevents disposition and damages of the Electrical Pipe when concreting. *ELECTRICAL PIPE HOLDER UPH 20 I.D UPH25 - UPH30 / - UPH 25 UPH 25A I.D I.D 17 UPH 30 I.D WRS 6 - WRS 8 / Cover 1/25-200/25 WALL RETAINING SPACER The Wall Retaining Spacer is for holding two layers of reinforcement between two forms. It enable determined cover on both sides of the reinforcement to the vertical formwork. It also acts as a wall thickness guidance. In order to place the Wall Retaining Spacer easily, make sure that the wire mesh or steel bars, horizontal bars are both in the same level and opposite their respective bars. WALL RETAINING SPACER WRS 6 1/25 WRS 8 200/25 *WRS /25 METAL FORM PLUG The Metal Form Plug is especially mean to cap off the pre-drilled holes in metal form. It can be easily scrap off by a scrapper after dismantle if the formwork and is a good replacement for the more costly aluminium plug. METAL FORM PLUG MFP 15.9 / 15.9 MFP mm *MFP 25

3 WALL SPACER, CONES & PLUG PLASTIC SLEEVING CONES The Plastic Sleeving Cones are used at the end of the PVC Sleeve and can be easily extracted after removal of the formwork to form a chamfered recess for subsequent grouting. PLASTIC SLEEVING CONES PSC 15 - PSC 26 / 15mm - 26mm PSC 15 15mm 2 PSC 20 1 *PSC 26 26mm SOLID PLASTIC CONE Solid Plastic Cone as a thrusty for concrete walls, high compression resistance. It can be extracted for multiple re-use. Redundant space can be filled-up with a waterproof and gastight sealant (s.a. Seifert working instruction). *SOLID PLASTIC CONES FC FC 200 / Wall THK mm FC140 Colour Dark Grey Wall THK 1(L) FC 1 Grey 1mm(L) FC 160 Black 160mm(L) FC 180 Red 180mm(L) FC 200 Cream 200mm(L) 30 18

4 HEAVY DUTY CHAIR SPACERS HEAVY DUTY CHAIRS (WITHOUT CLIP) Though without clip, but its concave seat can accommodate big bars with sizes varying from 32mm and height of mm. A tie of the bar with a steel wire to give additional stability. STEEL BAR CHAIR HD HD 4 / - mm HD 204 HD 254 HD 304 HD 354 HD 404 HD 454 HD 4 mm *HEAVY DUTY CHAIR (WITHOUT CLIP) NHD 20 - NHD / - mm NHD 20 NHD 25 NHD mm *BEAM SPACER NBS 25 25/ 19 NBS 30 30/ NBS 40 40/ NBS 25 - NBS / - mm NBS /mm 300 *HEAVY DUTY CHAIR (WITH CLIP) FOR SMALLER BAR NHD 20SC NHD 25SC NHD 30SC NHD 35SC NHD 40SC NHD 20SC - NHD 40SC / - *HEAVY DUTY CHAIR (WITH CLIP) FOR SMALLER BAR HD 204SC HD 254SC HD 304SC HD 354SC HD 404SC HD 454SC HD 4SC mm HD 204SC - HD 4SC / - mm

5 HEAVY DUTY CHAIR SPACERS HEAVY DUTY CHAIR (WITH CLIP) This selection of spacer is designed with top clip that clip the big bars with size varying from to 32mm and height from to 55mm. The clip itself provide sufficient stabilities without the need to tie the bar with steel wire. HEAVY DUTY CHAIR (WITH CLIP) HDA 404 HDA 4 mm HDA 404 / *HDA mm *HEAVY DUTY CHAIR (WITH CLIP) HD 204BC 800 HD 254BC 800 HD 304BC HD 354BC HD 404BC HD 454BC HD 54BC mm 20 HD 204BC - HD 4BC / - mm PLASTIC CHAIRS (WITH CLIP & SIDE) Another selection of Plastic Chairs developed with a side cover. It is most recommended for use in beam, where it not only provide the various height but also provide various side cover in one spacer. *BEAM SPACER (WITH CLIP) 204N 254N 204N - 4N / - mm 304N 354N 404N 4N mm