TOPW RKS DIMENSIONS
|
|
|
- Aubrey Murphy
- 6 years ago
- Views:
Transcription
1 Scan the barcode with your Smart- Phone app and view the latest publication of this document TopWorks Data Sheets provide the dimensions necessary to actuate a valve supplied by SVF Flow Controls, Inc. A2 = Stem O.D. C = or Through Hole (Noted on each drawing) A = Stem Flats D = Mounting Patterns F = Stem Engagement G = Stem Height Single Nut Tab Lock Double Nut Alignment Ring All dimensions shown are in inches Valve Series and Size (Stem assembly - single or double nut) International Standard for mounting pad dimensions SB7-2 (Double Nut) SIZE A A2 B C D1 D2 ISO 5211 E F G M F The above layout is a representation of a TopWorks Data Sheet. In some cases single nut or double nut stem assemblies are utilized, depending upon stem engagement as noted in (F) above. An alignment ring, like the one displayed above (E*), is used to align and center the accessories being mounted onto the valve. Dimension (E) is provided to ensure enough clearance is allocated for any accessories being mounted. Tab locks are positioned above the stem nut to keep the nut tight. Not all series show dimension (E). All data is based on SVF assemblies. All dimensions shown are in inches.
2 INDEX VALVE/SERIES SIZE PAGE R8/C8/D8/L8/N8/V8 1/4 ~ 2-1/2 1 B8/BN8 1/2 ~ 2 1 F8 1/2 ~ 2 2 FB8 1/4 ~ 2 2 H7 1/2 3 H7/H7-62 3/4 ~ 1 3 H7 1-1/2 4 H7 2 4 BZ9 1/2 ~ 2 5 EZ9 1/4 ~ Rev3 1-1/2 ~ 6 6 B41 Rev3/B41C/VB41 1/2 ~ 8 6 SB7/TSB7/SB79 1/4 ~ 1 7 SB7/TSB7/SB79 1-1/2 7 SB7/TSB7/SB SB7/TSB7/SB79 2-1/2 8 SB7/TSB7/SB79 3 & 4 8 SB7 6 8 SB7F/TSB7F 1/4 ~ 3/4 9 SB7F/TSB7F 1 ~ 2 9 P4 1/2 10 P4 3/4 10 P FS7 3 ~ 4 11 HBEV 1/4 ~ 2 11 SC Secondary Containment: 12 Model SCD05 For 1/4 ~ 3/4 R8, 1/2 B8, 1/4 ~ 3/4 SB7 & TSB7 Model SCD10 For 1 ~ 1-1/4 R8, 1 B8, 1 SB7 & TSB7 Model SCD15 For 1-1/2 ~ 2-1/2 R8, 1-1/4 ~ 2 B8, 1-1/2 ~ 2 SB7 & TSB7 Model SCD30 For 3 R8, 2-1/2 B8, 3 ~ 4 SB7 & TSB7 BEV9 1/2 ~ 2 13 SB9 1/2 ~ 4 13 MZ9 1/2 ~ 2 13 B42C 1/2 ~ 8 14 K8 1/2 ~ 2 14 B43C/B43T 1/2 ~ 4 and 6 ~ 8 Trunnion Valves 15 Cast Stem Extensions: 16 Model CISO05 For 1/4 ~ 3/4 R8, 1/2 B8, 1/4 ~ 3/4 SB7 & TSB7 Model CISO10 For 1 ~ 1-1/4 R8, 1 B8, 1 SB7 & TSB7 Model CISO15 For 1-1/2 ~ 2-1/2 R8, 1-1/4 ~ 2 B8, 1-1/2 ~ 2 SB7 & TSB7 Model CISO30 For 3 R8, 2-1/2 B8, 3 ~ 4 SB7 & TSB7 Index
3 R8-1/4 ~ 2-1/2 (ALSO FOR SERIES C8, D8, L8, N8 AND V8) R8 Sizes 1/4 ~ 2-1/2 SIZE A A2 B B2 C D ISO 5211 E F G 1/ M F / M F / M F / M F M F / M F / M F M F / M F B8-1/2 ~ 2 (ALSO FOR SERIES BN8) R8/C8/D8/L8/N8/V8 1/4 ~ 2-1/2 (Double Nut) B8 Sizes 1/2 ~ 2 B8/BN8 1/2 ~ 2 (Double Nut) SIZE A A2 B B2 C D ISO 5211 E F G 1/ M F / M F M F / M F / M F M F
4 F8 - SIZES 1/2 ~ 2 F8 Sizes 1/2 ~ 2 F8 1/2 ~ 2 (Double Nut) SIZE A A2 B B2 C D ISO 5211 E F G 1/ M F / M F M F / M F / M F M F FB8 - SIZES 1/4 ~ 2 FB8 Sizes 1/4 ~ 2 FB8 1/4 ~ 2 (Double Nut) SIZE A A2 B B2 C D ISO 5211 E F G 1/ M F / M F / M F / M F M F / M F / M F M F
5 H7 - SIZE 1/2 H7 Size 1/2 H7-1/2 (Double Nut) SIZE A A2 B B2 C D E F G 1/ M H7 - SIZES 3/4 ~ 1 (ALSO FOR SERIES H7-62) H7 H7-62 Sizes 3/4 ~ 1 H7/H /4 ~ 1 (Double Nut) SIZE A A2 B B2 C D1 D2 E F G 3/ M M
6 H7 - SIZE 1-1/2 H7 Size 1-1/2 H7 - SIZE 2 H7-1-1/2 (Double Nut) SIZE A A2 B B2 C D1 D2 D3 E F G 1-1/ M H7 Size 2 H7-2 (Double Nut) SIZE A A2 B B2 C D1 D2 D3 E F G M
7 BZ9 - SIZES 1/2 ~ 2 BZ9 Sizes 1/2 ~ 2 SIZE A (SQ.) B C1 C2 D1 ISO 5211 D2 ISO 5211 F G 1/ F F / F F F F / F F F F EZ9 - SIZES 1/4 ~ 4 C3 BZ9-1/2 ~ 2 (Single Nut) Through C1 A B F G EZ9 Sizes 1/4 ~ 4 Through C2 D1 D2 EZ9-1/4 ~ 4 (Single Nut) SIZE A (SQ.) B C1 C2 C3 D1 ISO 5211 D2 ISO 5211 F G 1/4-3/ M F F / M F F / M F F M F F / M F F / M F F M F F M F F M F F
8 41 Rev3 - SIZES 1-1/2 ~ 6 41R3 Sizes 1-1/2 ~ 6 41 Rev3-1-1/2 ~ 6 (Single Nut) SIZE A A2 B C D1 ISO 5211 E F G 1-1/ M F M F M F M F M F B41 Rev3/B41C - SIZES 1/2 ~ 8 (ALSO FOR SERIES VB41) B41R3 Sizes 1/2 ~ 8 SIZE A (SQ.) B C1 C2 D1 ISO 5211 D2 ISO 5211 E F G 1/ F F / F F F F / F F / F F F F / F F F F F F F B41 Rev3/B41C/VB41-1/2 ~ 8 (Single Nut)
9 SB7 - SIZES 1/4 ~ 1 (ALSO FOR SERIES TSB7 AND SB79) SB7 Sizes 1/4 ~ 1 SB7/TSB7/SB79-1/4 ~ 1 (Double Nut) SIZE A A2 B B2 C D1 ISO 5211 E F G 1/ M F / M F / M F / M F M F SB7 - SIZE 1-1/2 (ALSO FOR SERIES TSB7 AND SB79) SB7 Size 1-1/2 SB7/TSB7/SB79-1-1/2 (Double Nut) SIZE A A2 B B2 C1 & C2 D1 D2 ISO 5211 E F G 1-1/ M F SB7 - SIZE 2 (ALSO FOR SERIES TSB7 AND SB79) SB7 Size 2 SB7/TSB7/SB79-2 (Double Nut) SIZE A A2 B C1 & C2 D1 D2 ISO 5211 E F G M F
10 SB7 - SIZE 2-1/2 (ALSO FOR SERIES TSB7 AND SB79) SB7 Size 2-1/2 SB7/TSB7/SB79-2-1/2 (Single Nut) SIZE A A2 B B2 C1 & C2 D1 ISO 5211 D2 E F G 2-1/ M F SB7 - SIZES 3 ~ 4 (ALSO FOR SERIES TSB7 AND SB79) SB7 Sizes 3 ~ 4 SB7/TSB7/SB79-3 ~ 4 (Single Nut) SIZE 3 4 A B B C C2 & C3 M M D D D ISO 5211 F10 F10 E F G SB7 - SIZE 6 SB7 Size 6 SIZE A A2 Thread B B2 C D ISO 5211 E F G 6" 1.02 M42x /2-13 UNC 4.92 F SB7-6 (Single Nut)
11 SB7F - SIZES 1/4 ~ 3/4 (ALSO FOR SERIES TSB7F) SB7F Sizes 1/4 ~ 3/4 SB7F/TSB7F - 1/4 ~ 3/4 (Double Nut) SIZE A A2 B B2 C D1 ISO 5211 E F G 1/ M F / M F / M F / M F SB7F - SIZES 1 ~ 2 (ALSO FOR SERIES TSB7F) SB7F Sizes 1 ~ 2 SB7F/TSB7F - 1 ~ 2 (Double Nut) SIZE A A2 B B2 C1 & C2 D1 D2 ISO 5211 E F G M F / M F M F
12 P4 - SIZE 1/2 P4 Size 1/2 P4-1/2 (Single Nut) SIZE A A2 B B2 C D1 E F G 3/ M P4 - SIZE 3/4 P4 Size 3/4 P4-3/4 (Single Nut) SIZE A A2 B B2 C D1 D2 E F G 3/ M P4 - SIZE 1 P4 Size 1 P4-1 (Double Nut) SIZE A A2 B B2 C D1 D2 E F G M
13 FS7 - SIZES 3 & 4 FS7 Sizes 3 ~ 4 FS7-3 ~ 4 (Single Nut) SIZE A B B2 C1 C2 & C3 D1 D2 D3 ISO 5211 E F G M F M F HBEV - SIZES 1/4 ~ 2 HBEV Sizes 1/4 ~ 2 HBEV - 1/4 ~ 2 (Single Nut) SIZE A A2 B C D ISO 5211 E F G 1/ M F / M F / M F / M F M F / M F M F
14 SC MODELS SCD05 - SCD10 SC SCD05 SCD10 SC Models SCD05 - SCD10 (Double Nut) MODEL A A2 B B2 C D ISO 5211 E F G SCD M F SCD M F SC MODEL SCD15 SC SCD15 SC Model SCD15 (Double Nut) MODEL A A2 B B2 C D1 D2 ISO 5211 E F G SCD M F SC MODEL SCD30 SC SCD30 SC Model SCD30 (Single Nut) MODEL A B B2 C1 C2 & C3 D1 D2 D3 ISO 5211 E F G SCD M F
15 BEV9 - SIZES 1/2 ~ 2 F G BEV9 * C1 & C2 are through holes **C3 is a tapped hole Sizes 1/2 ~ 2 BEV9 SIZE A1 B B2 C1 C2 C3 D1 ISO 5211 D2 ISO 5211 F G 1/ M F F / M F F M F F / M F F M F F SB9 - SIZES 1/2 ~ 4 F G SB9 MZ9 SB9 SIZE A B C1 C2 D1 ISO 5211 D2 ISO 5211 F G 1/2" F F /4" F F " F F /2" F F " F F /2" F F " F F " F MZ9 - SIZES 1/2 ~ 2 MZ9 Sizes 1/2 ~ 4 Sizes 1/2 ~ 2 These drawings can be used for both the Series SB9 and Series MZ9. Dimensions for the Series MZ9 are in the table at the bottom of the page. MZ9 SIZE A B C1 C2 D1 ISO 5211 D2 ISO 5211 F G 1/2" F F /4" F F " F F /2" F F " F F
16 B42C - SIZES 1/2 ~ 8 B42C Sizes 1/2 ~ 8 SIZE A B C1 C2 D1 ISO 5211 D2 ISO 5211 F G 1/2" F F /4" F F " F F /2" F F " F F /2" F F " F F F F " F K8 - SIZES 1/2 ~ 2 B42C - 1/2 ~ 8 (Single Nut) K8 Sizes 1/2 ~ 2 K8-1/2 ~ 2 SIZE A B (SQ.) C1 C2 D1 ISO 5211 D2 ISO 5211 F G 1/2" F F /4" F F " F F /2" F F " F F
17 B43C - SIZES 1/2 ~ 4 K B B43C Sizes 1/2 ~ 4 B43C - 1/2 ~ 4 (Single Nut) SIZE A B B2 C D ISO 5211 F G H J K 1/2" M F /4" M F " M F /2" M F " M F /2" M F " M F " M F B43T - SIZES 6 & 8 TRUNNION VALVES B43T Sizes 6 & 8 B43T - 6 & 8 Trunnion Valves SIZE A B B2 C D G 6" "
18 CAST STEM EXTENSIONS MODELS CISO05 - CISO10 CSE CISO05 CISO10 STEM EXTENSIONS CISO05 - SCISO10 (Double Nut) MODEL A A2 B B2 C D ISO 5211 E F G CISO M F CISO M F CAST STEM EXTENSIONS MODEL CISO15 CSE CISO15 STEM EXTENSION CISO15 (Double Nut) MODEL A A2 B B2 C D1 D2 ISO 5211 E F G CISO M F CAST STEM EXTENSIONS MODEL CISO30 CSE CISO30 STEM EXTENSION CISO30 (Single Nut) MODEL A B B2 C1 C2 & C3 D1 D2 D3 ISO 5211 E F G CISO M F
PRODUCT SPECIFICATION GUIDE. Flow Controls, Inc. VALVES ACTUATORS CONTROLS. Checkout our ANSI Class. Flanged Valves on Page 11!
SVF Flow Controls, Inc. VALVES ACTUATORS CONTROLS Checkout our ANSI Class 1 50, 300 and 600 Flanged on Page 11! PRODUCT SPECIFICATION GUIDE Rev. 09/14 SVF Flow Controls, Inc. 13560 Larwin Circle, Santa
SVF Flow Controls. Product Selection Guide Industrial High Pressure Flanged Hygienic Direct Mount C Series Specialty Valves Actuators Controls
SVF Flow Controls VALVES ACTUATORS CONTROLS Product Selection Guide 2018 Industrial High Pressure Flanged Hygienic Direct Mount C Series Specialty Valves Actuators Controls SVF Flow Controls, LLC 5595
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT 1-12 RF15 - ASME Class 150 RF30 - ASME Class 300 1 R F 1 5 / R F 3 0 F L A N G E D S E R I E S B A L L VA LV E S Flow-Tek s Series RF15 and RF30 Ball Valves
Installation Operation Maintenance
Installation Operation Maintenance www.challengervalves.com.au 1 QAD#IM1015 REVC 3.10.15 Index 1. INTRODUCTION 3 1.1 Design Features 1.2 Flange and Pipe Compatibility 3 1.3 Operating Pressures and Temperatures
DATA PD BS7... Spring Brakes (Disc), diaphragm/diaphragm. Product. Function. Technical Features
Commercial Vehicle Systems Product DATA PD-415-200 Function This range of Spring Brakes is used on axles fitted with air disc brakes and provides the service and parking brake functions. The internal wind
Direct Mount Packages
800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated
Installation Operation Maintenance. LSSN Butterfly Valve AGA Approved 50MM - 150MM. QAD#IM6055.REVA
LSSN Butterfly Valve Installation Operation Maintenance Licence Number: 5326 www.challengervalves.com.au 1 Index 1. INTRODUCTION 1.1 Design Features 3 1.2 Flange and Pipe Compatibility 4 1.3 Operating
509F. Multi-Port Flanged Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
50F Multi-Port Flanged Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 50F Series //5-Way Flanged Ball
JC BALL VALVES ASSEMBLY AND MAINTENANCE MANUAL
JC BALL VALVES ASSEMBLY AND MAINTENANCE MANUAL DOC. MMM1500I SBF AND SBR SERIES (Split body, Semi trunnion, Full and Reduced bore) Figs. 1510, 1516, 1525, 1540, 1515, 1530, 1615 & 1630 FULL BORE PN 10
Quad4 Pneumatic Actuators High Performance, Four Piston, Rack & Pinion Actuators
The SVF Quad TM quarterturn rack & pinion actuator is a four piston actuator which generates torque around a centrally located pinion, giving more than double the torque of single & double rack & pinion
Triad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F
LC149 SERIES BUTTERFLY VALVE INSTALLATION, OPERATION, & MAINTENANCE
LC149 SERIES BUTTERFLY VALVE INSTALLATION, OPERATION, & MAINTENANCE APOLLO BFV INSTALLATION MANUAL - Page 2 of 12 INTRODUCTION... 3 DESIGN FEATURES... 3 OPERATING PRESSURES... 3 PRODUCT STORAGE... 3 PRODUCT
Bulb Number Part Number Description PIN, DETENT
Bulb Number Part Number Description 2 8229 PIN, DETENT 4 11040-440 KNOB 17 11050-375 PIVOT PIN 18 11070-200 SEAT FRAME 22 11070-204 WEIGHT FRAME 24 11070-207 CUSHION TUBE 29 11090-369 SHAFT, PIVOT 30 11090-392
MO Declutchable Manual Override Gearbox EL-O-Matic F-Series Actuators option
EFG.07.MO.EN, Page 1 of 2, Rev. 0 May 2018 MO Declutchable Manual Override Gearbox s option Light weight aluminum design and suitable for indoor and outdoor use. Easy operation. Suitable for quarter turn
ZICO 2070PM1 REV Page 1
QUIC-FLOW Dump Valves Parts and Instruction Manual ZICO 070PM REV. 9-0- Zico dump valves are uniquely designed to stop annoying leakage. A special slotted hinge over the door shifts when in the closed
BPW rigid axles with drum brake Ø 300 mm. For axle loads from 6,400 kg to 12,000 kg.
BW rigid axles with drum brake Ø 300 mm. For axle loads from 6,400 kg to kg. NS NZ M 84 Technical Data / N axles Axle cross section Wheel stud Ø / Offset / M 311 2,195 1,500 628 NZF 6410 6,400 3) SN 3015
OPERATION AND MAINTENANCE INSTRUCTIONS
OPERATION AND MAINTENANCE INSTRUCTIONS 334 SERIES THREE-PIECE BALL VALVES 1/4 to 2-1/2 Installation and Operation Always install your valve according to accepted industry standards and practices and operate
Model 6. Power Wheel. Planetary Gear Drive
Model 6 Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Model 6 Wheel Drives - Single & Double Reduction 4-5 Model 6 Wheel Drives w/a2 Series Integral Parking Brake - Single & Double Reduction
Rail Vehicle Systems ... PC Rev. D (1/29/15) -en... Parts Catalog. Dirt Collector and Cut-Out Cock w/strainer
Rail Vehicle Systems PC-772124 ( Rev. D (1/29/15) -en Parts Catalog and Cut-Out Cock w/strainer Contact address New York Air Brake 748 Starbuck Avenue Watertown, NY 13601 USA Phone: +1 315 786 5200 Fax:
Parts Manual Rev. 5
0-0- CL 0 - Rev. Parts Manual MZ / 0-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of % ethanol (E)
DESCRIPTION. 10" Square Valve 10" Valve for United Plastics Tank Valve Handle-Complete Assembly Auxilliary Handle Lock less Hardware (see page 12)
QUIC-FLOW MANUAL DUMP VALVE ZICO 070PM REV 3-5- QUIC-FLOW valves are the fastest dumping systems for tankers, bar none, dumping up to 800 GPM. Mounting the valve at the bottom of the tank provides approximately
Weight Stroke TÜV-Inspection approx. [kg] II )4) BZ M16x Port threads:
![Weight Stroke TÜV-Inspection approx. [kg] II )4) BZ M16x Port threads:](/thumbs/78/77165971.jpg "Weight Stroke TÜV-Inspection approx. [kg] II )4) BZ M16x Port threads:")
Commercial Vehicle Systems Product DATA Spring Brakes (S-cam), diaphragm/piston Doc. No. Y1137 (EN - Rev. 5) September 216 PD-413-1 Function This range of Spring Brakes is used on axles fitted with drum
The VALTORC 520-SN Series 3/4/5-Way Sanitary Ball Valve. Standard Features and Benefits. Specifications
The VATORC 50-SN Series 3/4/5-Way Sanitary Ball Valve The 50-SN is a true multi-way Ball valve with balanced seat construction. Porting and shut-off capabilities can reduce the number of process valves
SB Series Wafer/Lug Butterfly Valves
SB Series Wafer/Lug Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 ABOUT PRATT INDUSTRIAL Pratt Industrial specializes in the design, engineering, and worldwide distribution
ADJUSTABLE FOOT INSERTS FOR ROUND TUBING
ADJUSTABLE FOOT INSERTS FOR ROUND TUBING J D E F A B C G H I K INSERTS FOR 1-5/8 IN. (40MM) O. D. 16 GA. ROUND TUBING HEX FOOT Thermoplastic, or die-cast Zamak insert body with die cast or stainless steel
KASON EQUIPMENT LEGS AND ACCESSORIES SERTS FOR. RoHS COMPLIANT ALPHABETICAL INDEX CONTACT
KASON EQUIPMENT LEGS AND ACCESSORIES ALPHABETICAL INDEX BLE FOOT SERTS FOR D TUBING A Appliance Legs 1-inch...B-18 Heavy Duty... B-21 Standard... B-19 Suction Cup... B-20 C Cross Brace Fittings... B-24
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide PDF processed with CutePDF evaluation edition www.cutepdf.com 3 Piece Valves Triad Series Models FP/SP-2000/3000
MP and MP Diaphragm and Seal Kits for MP8000 Series Actuators
MP8000-6325 and MP8000-6350 Diaphragm and Seal Kits for MP8000 Series Actuators Contents of the MP8000-6325 Diaphragm and Seal Kit for MP82 and MP83 Actuators One seal, 5/8 in. Internal Diameter (I.D.)
QUICK INDEX. Series SMA Aluminum. Pancake and conventional lengths 1 1/8 thru 3 bore. Series SMS Solid Stainless
QUICK INDEX A U R O R A A I R P R O D U C T S Series SMA Aluminum Pancake and conventional lengths /8 thru 3 bore Series SMS Solid Stainless Pancake and conventional lengths for hostile environments Series
Multiway Ball Valve with Vertical In-/Outlet Metal Seated. Type 24-M. Approvals
Multiway Ball Valve with Vertical In-/Outlet Metal Seated Type 24-M Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe
Three-Way Metal Seated Ball Valve Type 21-M
Three-Way Metal Seated Ball Valve Type 21-M Design Characteristics Split body Trunnion mounted ball with - or T-port and integral stem ive loaded stem packing Spring loaded seat system Fire Safe design
Two-Way Metal Seated Ball Valve Type 16-R
Two-Way Metal Seated Ball Valve Type 16- Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
Bulb Number Part Number Description BLOCK, STOP
Bulb Number Part Number Description 1 11000-384 BLOCK, STOP 2 11040-301 CLAMP BLOCK INSERT 6 12000-307 PIN, PIVOT 7 12000-337 SHAFT, PIVOT, 12.75 11 12000-345 FOOT PAD, 4.00 x 7.00 19 12000-398 SPACER
Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL F AIR HYDRAULIC PUMP
SPX Corporation 88 th Street Rockford, IL 609-699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 77-86 Fax: (800) 76-86 Order Entry: (800) -8 Fax: (800) 88-70 Parts List for: Form
Series 45 Axial Piston Open Circuit Pumps Technical Information Frame F
Design cross section LS contro l (attached to endcap) LS spoo l LS adjustmen t PC spoo l PC adjustmen t Servo piston Bias sprin g Piston Slipper Tapered roller bearing Valve plate Shaft seal Cylinder block
Cover Page - Butterfly Valves Ordering Information Design Features, 2 to 12 Design Features, 2 to 12 (continued)
DESCRIPTION Cover Page - Butterfly Vs Ordering Information Design Features, 2 to 2 Design Features, 2 to 2 (continued) Design Features, 2 to 2 (continued) Design Features, 4 to 4 CV Chart, 2 to 4 Torque
Double Offset High Performance Butterfly Valve
Double Offset High Performance Butterfly Valve INSTALLATION OPERATION MAINTENANCE APOLLO INTERNATIONAL HIGH PERFORMANCE BFV IOM - Page 2 of 20 TABLE OF CONTENTS INTRODUCTION 3 PRODUCT STORAGE 3 PRODUCT
Installation Instructions
34-636- 2286, Rev. C (barcode for factory use only) M9000-400 Jackshaft Linkage Kit Installation Instructions M9000-400 Part No. 34-636-2286, Rev. C Issued June 2017 Applications Refer to the QuickLIT
Size Range: Body Material: Features:
C O O SVF Flow Controls I N C O R P O R A T E 13560 Larwin Circle Santa Fe Springs, CA 90670 800.783.7836 Fax: 562.802.3114 Sales@SVF.net www.svf.net SERIES 41, 41 & 42 FLANGE ALL VALVES API 607 4T EITION
CONTINENTAL HYDRAULICS LPV SERIES AXIAL PISTON PUMPS
CONTINENTAL HYDRAULICS LPV SERIES AXIAL PISTON PUMPS 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM LPV PUMPS FEATURES AND BENEFITS The LPV line of Variable
Two-Way Soft Seated Ball Valve Type 14-S
Two-Way Soft Seated Ball Valve Type 14-S Design Characteristics Two piece body Trunnion mounted ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design
Transportation Valves
Transportation Valves A Name You ve Trusted for Years... 780 Series Butterfly Valves Features: Available in sizes 3 thru 6 One handle fits sizes 3 thru 6 Integrated 180º notch plate eliminates mounting
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
Introduction. Resilient Seat Butterfly Valves. Valves D-207.
Introduction Resilient Seat Butterfly D-207 Resilient Seat Butterfly are now available in sizes up to 20-inches. Excellent for isolation applications, two-way and floating Butterfly provide 2-position
SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide 3 Piece Valves Triad Series Models FP/SP-2000/3000 / Valve Sizes: Model FP: 1/4 through 4 Model SP: 3/4
BVM Series Flanged Industrial Control Ball Valves 2 Way 2-1/2-12
The BVM Series of Flanged Industrial Ball Valves are ideally suited to a wide range of steam and water applications that require a high degree of rangeability. These valves provide exceptional characterized
F20 Series Ball Valve Index
F0 Series Ball Valve Index Features & Benefits F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " State of California Prop 5 WARNING: Cancer and Reproductive Harm. For
Weight approx. [kg] II39908FA BZ Part No. Type No. Type Push Rod Seal TÜV Inspection Report
![Weight approx. [kg] II39908FA BZ Part No. Type No. Type Push Rod Seal TÜV Inspection Report](/thumbs/93/114014067.jpg "Weight approx. [kg] II39908FA BZ Part No. Type No. Type Push Rod Seal TÜV Inspection Report")
Commercial Vehicle Systems Product DATA PD-403-200 Function This range of Brake Chambers is used on axles fitted with drum brakes. The single diaphragm cylinder provides the service brake function. In
Series 8500 Grayline Butterfly Valves
Series 8500 Grayline Butterfly Valves Features State-of-the-Art Manufacturing: Valves are produced using state-of-the-art manufacturing equipment. Each valve is tested to 110% of rated working pressure
LOWE Fuel Pump Drive Kit / Front Engine Mount fits SBF Windsor JESEL Belt Drive KBD34175
LOWE Industries PO Box 180 Rosewood, Qld 4340 www.kenlowe.com.au Phone 0411-699 535 LOWE Fuel Pump Drive Kit / Front Engine Mount fits SBF Windsor JESEL Belt Drive KBD34175 SBF Windsor with JESEL Belt
FROM SIMPLE TO COMPLEX DESIGNS. Flo-Tite Offers A Complete Line of High Quality Engineered Ball Valves For Your Most Demanding Applications
SG-2013 BALL VALVES FROM SIMPLE TO COMPLEX DESIGNS Sanitary Valves Cryogenic Valves Automated Valves Fusible Link Valves Cavity Filled Valves V-Port Control Valves Dribble Control Valves Instrumentation
Parts Manual MZ5225ZT / MZ6128ZT / MZ6128ZT /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual MZ5225ZT / 966690501
BASIC STANDARDS. Core holes for tapping screws and bolts with tapping screw thread DIN Simple, most common tapping thread-joints.
ISO DIN : 797 Core holes for tapping screws and bolts with tapping screw thread DIN 7970 Guidelines for application The essential characteristic of tapping screw thread is its capability of forming chipless
Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
3L/T 2100F-F Series. Ball Valve, 3 Way Class 150 (150# FE) 150# Flanged Ends, Side Entry, 1/2" - 6" Stainless or Carbon Steel.
L/T-2100F-BF-CS Series L/T-2100F-BF-S6 Series Quick Spec Product Scope Size Range 1/2" - 6" 150# Flanged Ends Port Type Full Port Port Type L-Port or T-Port Port Orientation Side Entry Pressure Rating
SMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
One and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index
One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page
F76 Water Filters. Specifications. and MV876 Automatic-Backwash Control Accessory (not included)
F76 Water Filters and MV876 Automatic-Backwash Control Accessory (not included) The F76 is a high flow capacity water filter used to remove sediment and debris from residential or commercial water systems.
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
Quad4 Pneumatic Actuators
The SVF Quad4 TM quarterturn rack & pinion actuator is a four piston actuator which generates torque around a centrally located pinion, giving more than double the torque of single & double rack & pinion
Three Piece Forged Trunnion Mounted Ball Valve
International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320 Houston, Texas 77041 713-983-7600 TM Three Piece Forged Trunnion Mounted Ball Valve 2 through 56 ASME Class 150-1500 Bolted or Welded
Series Village Lane Easley, SC Ph: (864) Fax: (864) Worm and Spur Gear Electric Actuators
Series 30 127 Village Lane Easley, SC 29642 Ph: (864) 605-0150 Fax: (864) 605-0830 www.tru-flo.com Worm and Spur Gear Electric Actuators External Position Indicator Indicator engages directly with drive
SMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
This innovation places FluoroSeal Plug Valves at the leading edge of technology in the industrial valve market.
Specialty Valves EZ-SEAL TOP SEAL & ADJUSTMENT SYSTEM This product is available on FluoroSeal Sleeved and Lined Plug Valves in ANSI/ ASME and DIN standards. In fact all DIN valves up to DN 150 come fitted
Product Name Chair Conversion Kit (to LR Delivery Unit) Installation [Kit # xx]
![Product Name Chair Conversion Kit (to LR Delivery Unit) Installation [Kit # xx]](/thumbs/75/71790484.jpg "Product Name Chair Conversion Kit (to LR Delivery Unit) Installation [Kit # xx]")
Elevance Product Name Chair Conversion Kit (to LR Delivery Unit) Installation Installation [Kit #002-1966-xx] Attention: Use this kit to convert an Elevance Chair to a Chair with an Elevance LR mounted
KEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve FEATURES GENERAL APPLICATION High performance applications such as steam, chill water, water, utility lines, gasoline,
FO, FL, G Series. Variable Stroke Straight Line Action Clamps Product Overview. FL Series. G Series. FO Series. Type of Mounting: Through hole mount
FO, FL, G Series Variable Stroke Straight Line Action Clamps Product Overview FO Series Type of Mounting: Foot Type of Actuation: Hand wheel or hand lever (one-handed operation) Locking lever and Plunger
Certifications & Approvals
Industrial Certifications & Approvals Matco-Norca is committed to maintaining a high standard of quality for all the products we offer. Most products in this catalog are labeled with a designated approval
Cassette Feeding Unit-AE1 PARTS CATALOG MARCH 9, 2010 REV. 0. CANON Cassette Feeding Unit-AE1 REV. 0 PRINTED IN U.S.A.
Cassette Feeding Unit-AE1 PARTS CATAOG MARCH 9, 2010 REV. 0 COPYRIGHT 2010 CANON INC. CANON Cassette Feeding Unit-AE1 REV. 0 PRINTED IN U.S.A. PREFACE This Parts Catalog contains listings of parts used
Straight Line Action Clamps
Straight Line Action Clamps Sizing and Application Chart Click Page # View N [lbf.] mm [inch] Series Page MC-SLA-# 0 to 1000 [0 to 225] 1000 to 2000 [225 to 450] 2000 to 3000 [450 to 675] 3000 to 5000
Mark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves
Mark 9020 Series Sanitary Ball Valves The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2007. From the materials
RAM Company USA Products Line
RAM Company USA Products Line Trunnion Mounted Ball Valves Metal Seated Ball Valve 3-Way Ball Valve Jacket Ball Valve Ball Valves with Actuator Trunnion Mounted Ball Valves Main Features DOUBLE PISTON
FLANGED BALL VALVES ASME CLASS 150 & 300
FLNGED BLL VLVES SME CLSS 150 & REDUCED BORE: 1/2 (DN 15 500) SERIES 7000 The Jamesbury polymer-seated flanged ball valves provide industry leading performance and reliability. Offered in a wide variety
KF Series T Ball Valves
K Series T Ball Valves Superior luid Control Products for the Petrochemical and Industrial Markets Series T Ball Valves This top entry valve with a one-piece trunnion supported ball conforms to API specifications
Hardware Part Listing
Page 1 of 7 Hardware Part Listing Path: Home > Enclosure Index > Hardware Screws Part Number 1421F4 Qty per pkg. 4 Sets Thumbnail Photo Replacement & Accessory Screw Use Set of pan head machine screws,
Industrial Threaded Ball Valves (Includes socket weld & buttweld ends) Carbon & Stainless Steel
Industrial Threaded Ball Valves (Includes socket weld & buttweld ends) Carbon & Stainless Steel KITZ CORPORATION OF AMERICA INDUSTRIAL THREADED BALL S Carbon and Stainless Steel CONTENTS Figure Number
SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE
SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE Series RTC Rodless Cylinder Pneumatic automation building block Series RTC (Rodless Thrust Cylinder)-High performance shuttle type rodless cylinders
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
Butterfly Valves. watts.com
Butterfly Valves watts.com Durafil is a registered trademark of Cargill, Limited. Teflon is a registered trademark of the E.I. Dupont de Nemours & Company, Incorporated. Uniseal is a registered trademark
brochure PN
brochure PN-2013-01 www.bitorq.com/pneumatic.html Pneumatic Actuators PAGES 4-11 ON THE WEB AT BITORQ.COM/PNEUMATIC_PN.HTML COMPACT, RELIABLE DESIGN OPEN-CLOSED ADJUSTMENT STOPS DOUBLE ACTING AND SPRING
Parts Manual MZ5225 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual MZ5225 / 966690502 Please
Parts Manual MZ52 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual MZ52 / 962401 Please
Parts Manual M-ZT52 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual M-ZT52 / 961001 Please
Keystone Figures 310/312 K-LOK Butterfly Valves
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve Features General Application High performance applications such as steam, chill water, water, utility lines, gasoline,
M x Series Cast Iron Flanged Valve Linkage Kit for Tandem Mounting of M9000 Series Electric Actuators
Issue Date June 15, 2007 Supersedes November 15, 2002 M9000-53x Series Cast Iron Flanged Valve Linkage Kit for Tandem Mounting of M9000 Series Electric Actuators Installation Parts Included Linkage Stem
MZ 52LE. Parts Manual. Zero Turn Mower /
Parts Manual MZ 52LE Zero Turn Mower / 9677406-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support
505F Multi-Port Ball Valve
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way
Mark 79/79MX Series JORDANVALYE. Three-Way Control Valves
Mark 79/79MX Series Three-Way Control Valves The Mark 79 is a pneumatic 3-way control valve for use in either bypass or mixing service. The MK79 utilizes the unique sliding gate trim design to provide
CLARKSON URETHANE KNIFE GATE VALVES FIGURE SU10R
CLARKSON URETHANE KNIFE GATE VALVES Installation and maintenance instructions for field replaceable urethane lined knife gate valves GENERAL INFORMATION The Clarkson SU10R knife gate valve offers bi-directional
Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
Veljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Sizes ½"-36" Pressures Class Figure 150
SERIES 7200 FULL PORT BALL VALVES
SERIES 7200 FULL PORT BALL VALVES Publication S7200-101 Issue 05/16 Rev.F Design Body Stainless Steel (A351-CF8M) Carbon Steel (A216-WCB) Stem 316 Stainless Steel ISO 5211 Mounting Plate Seat TFM* RPTFE
Ball and Stem Materials: 316 Stainless Steel Alloy 20 Monel Hastelloy C. Service Applications: Hydraulics Chemical
13560 Larwin Circle, Santa Fe Springs, CA 90670 Phone: (562) 802-2255 (800) 783-7836 Fax: (562) 802-3114 Netsite: www.svf.net E-mail: Sales@SVF.net R8 SERIES ANTI-STATIC API-607-4th EDITION 1/4 6 PROCESS
VERTICAL TURBINE PUMPS SECTION 115. Discharge Head and Accessories
Peerless Pump Company SECTION 115 Page 0.1 May 19, 2005 Application Data Discharge Head and Accessories INDEX DATA & DIMENSIONS ITEM Type C & CHP 4 Type FA, FRA 7 Type S & SHP 5 Type UG 6 Column Flange,
D-Series Rack & Pinion Pneumatic Actuators
D-Series Rack & Pinion Pneumatic Actuators Introduction 2 Bettis D-Series pneumatic rack and pinion actuators provide its users with reliability and economy in valve automation. Specifically designed for
BUTTERFLY VALVE VF-7 Series
BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm
771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR
771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CHARACTERISTIC The 771 XS wafer ball valve is dedicated to the automatic shut-off of low and medium pressure industrial fluids lines up to 16 bar. The