Certifications & Approvals

Size: px
Start display at page:

Download "Certifications & Approvals"

Transcription

1 Industrial

2 Certifications & Approvals Matco-Norca is committed to maintaining a high standard of quality for all the products we offer. Most products in this catalog are labeled with a designated approval or certification code. Below is a brief description of these approvals. I.S.O. 00 CERTIFIED ADA ANSI ASME ASSE ASTM AWWA CSA FM ISO MSS NACE NSF SDWA UL UPC USC WS American Disabilities Act Protecting the rights of people with physical or mental disabilities. American National Standards Institute Organization that coordinates work among U.S. Standards writing groups; Works in conjunction with other groups such as ISO, ASME, ASTM, etc. American Society of Mechanical Engineers Develops standards and testing criteria for finished products. American Society of Sanitary Engineering Develops standards and qualifies products for plumbing and sanitary installations. American Society for Testing Materials Develops standards for materials, products, systems and services. American Water Works Association Promotes public health through improvement of water quality. Develops standards for valves, fittings and equipment. Canadian Standards Association Develops standards, tests and qualifies products used in gas lines and gas appliance installations. Factory Mutual Develops standards and qualifies products for use by the general public. International Standards Association A worldwide process control organization. An internationally recognized certification for manufacturers that comply with high standards of quality control. Developed standards ISO-000 through ISO-00 Manufactures Standardization Society of the Valves & Fittings Industry, Inc. A committee of manufacturers that develops technical codes and standards for the valve & fitting industry. National Association of Corrosion Engineers Equips society to protect people, assets and the environment from the adverse effects of corrosion. NSF International An organization committed to public health that writes standards and certifies products for food, water and consumer products. The Safe Drinking Water Act Is the main federal law that ensures the quality of Americans drinking water. Under SDWA, EPA sets standards for drinking water quality and oversees the states, localities, and water suppliers who implement those standards. Weighted average lead content of water contact components must be 0.% or less. Underwriter s Laboratory Tests and qualifies valve and fittings products under UL standards for safety. Uniform Plumbing Code Developed by the International Association of Plumbing and Mechanical Officials to govern the installation and inspection of plumbing systems as a means of promoting the public s health, safety and welfare. University of Southern California Foundation for Cross-Connection Control and Hydraulic Research that lists approved backflow prevention assemblies. Water Sense A U.S. Environmental Protection Agency (EPA) program designed to encourage water efficiency in the United States through the use of a special label on consumer products. Copyright 0 by MATCO-NORCA Incorporated. Reproduction or duplication of the contents herein prohibited without permission. MATCO-NORCA reserves the right to change products depicted herein at any time, and accepts no liability for errors or ommissions.

3 One & Two Piece Threaded Ball Valves SSTH Matco-Norca Model Number size Carton quantities inner master One Piece Reduced Port Stainless Steel Ball Valves - NPT W.P. 000 WOG W.T. - - Blow Out Proof Stem Locking Handle SSTH SSTH0 SSTH0 SSTH0 SSTH0 SSTH0 SSTH0 SSTH07 SSTH0 /" /" /" /" " -/" -/" " SSTH Two Piece Full Port Stainless Steel Ball Valves - NPT W.P. 000 WOG W.T. - - Blow Out Proof Stem Locking Handle 0SSTH 0SSTH0M 0SSTH0M 0SSTH0M 0SSTH0M 0SSTH0M 0SSTH0M 0SSTH07M 0SSTH0M 0SSTH0M 0SSTH0M / / / / -/ -/ -/ SSTH SSTH CSTH Two Piece Reduced Port Stainless Steel Ball Valves - NPT W.P. / WOG W.P. -/ - 00 WOG W.T. - - Blow Out Proof Stem Locking Handle SSTH0M SSTH0M SSTH0M SSTH0M SSTH0M SSTH0M SSTH07M SSTH0M / / / / -/ -/ Two Piece Reduced Port Carbon Steel Ball Valves - NPT W.P. / WOG W.P. -/ - 00 WOG W.T. - - Blow Out Proof Stem Locking Handle CSTH CSTH0M CSTH0M CSTH0M CSTH0M CSTH0M CSTH0M CSTH07M CSTH0M / / / / -/ -/ Industrial Catalog Global sourcing. National compliance. Local service.

4 Two & Three Piece Ball Valves 7LH Matco-Norca Model Number size Two Piece Full Port Forged Brass Ball Valves - NPT W.P. 00 WOG Blow Out Proof Stem Locking Handle Carton quantities inner master 7LH 7T0LHLF 7T0LHLF 7T0LHLF 7T0LHLF 7T0LHLF 7T0LHLF 7T07LHLF 7T0LHLF 7T0LHLF 7T0LHLF 7TLHLF / / / / -/ -/ -/ CSTH Three Piece Full Port Carbon Steel Ball Valves - NPT W.P. 000 WOG W.T. - - Blow Out Proof Stem Locking Handle 0CSTH 0CSTH0 0CSTH0 0CSTH0 0CSTH0 0CSTH0 0CSTH0 0CSTH07 0CSTH0 0CSTH0 0CSTH0 0CSTH / / / / -/ -/ -/ CSSW Three Piece Full Port Carbon Steel Ball Valves - SW W.P. 000 WOG W.T. - - Blow Out Proof Stem Locking Handle 0CSSW 0CSSW0 0CSSW0 0CSSW0 0CSSW0 0CSSW0 0CSSW0 0CSSW07 0CSSW0 0CSSW0 0CSSW0 0CSSW / / / / -/ -/ -/ Industrial Catalog

5 Three Piece Ball Valves 0SSTH Matco-Norca Model Number size Carton quantities inner master Three Piece Full Port Stainless Steel Ball Valves - NPT W.P. 000 WOG W.T. - - Blow Out Proof Stem Locking Handle 0SSTH 0SSTH0 0SSTH0 0SSTH0 0SSTH0 0SSTH0 0SSTH0 0SSTH07 0SSTH0 0SSTH0 0SSTH0 0SSTH / / / / -/ -/ -/ SSSW Three Piece Full Port Stainless Steel Ball Valves - SW W.P. 000 WOG W.T. - - Blow Out Proof Stem Locking Handle 0SSSW 0SSSW0 0SSSW0 0SSSW0 0SSSW0 0SSSW0 0SSSW0 0SSSW07 0SSSW0 0SSSW0 0SSSW0 0SSSW / / / / -/ -/ -/ Industrial Catalog Global sourcing. National compliance. Local service.

6 Flanged Ball Valves 0CSFLD Matco-Norca Model Number size Carton quantities inner master Two Piece Full Port Flanged Carbon Steel Ball Valves W.P. ANSI Class 0 Blow Out Proof Stem W.T. - - Locking Handle ASME B. 0CSFL0D 0CSFL07D 0CSFL0D 0CSFL0D 0CSFL0D 0CSFLD 0CSFLD -/ -/ 0CSFLD 0SSFLD Two Piece Full Port Flanged Stainless Steel Ball Valves W.P. ANSI Class 0 Blow Out Proof Stem W.T. - - Locking Handle ASME B. 0SSFL0D 0SSFL07D 0SSFL0D 0SSFL0D 0SSFL0D 0SSFLD 0SSFLD -/ -/ 0SSFLD Industrial Catalog

7 Forged Gate Valves 00FCT Matco-Norca Model Number size Carton quantities inner master Forged Carbon Steel Gate Valves - Class 00 - NPT ASTM A0 API 0 / API Maximum Pressure 7 PSI Maximum Temperature 0º F NACE MR07 00FCT 00FCW 00FCW 00FSST 00FCT0 00FCT0 00FCT0 00FCT0 00FCT0 00FCT0 00FCT07 00FCT0 / / / / -/ -/ Forged Carbon Steel Gate Valves - Class 00 - SW ASTM A0 API 0 / API Maximum Pressure 7 PSI Maximum Temperature 0º F NACE MR07 00FCW0 00FCW0 00FCW0 00FCW0 00FCW0 00FCW0 00FCW07 00FCW0 / / / / -/ -/ Forged Stainless Steel Gate Valves - Class 00 - NPT ASTM A/L API 0 / API Maximum Pressure 7 PSI Maximum Temperature 0º F NACE MR FSST0 00FSST0 00FSST0 00FSST0 00FSST07 00FSST0 / / -/ -/ 0 00FSST 00FSSW Forged Stainless Steel Gate Valves - Class 00 - SW ASTM A/L API 0 / API Maximum Pressure 7 PSI Maximum Temperature 0º F NACE MR07 00FSSW0 00FSSW0 00FSSW0 00FSSW0 00FSSW07 00FSSW0 / / -/ -/ 0 00FSSW Industrial Catalog Global sourcing. National compliance. Local service. 7

8 Forged Globe Valves 0FCT Matco-Norca Model Number size Carton quantities inner master Forged Carbon Steel Globe Valves - Class 00 - NPT ASTM A0 API 0 / API Maximum Pressure 7 PSI Maximum Temperature 0º F NACE MR07 0FCT 0FCW 0FCW 0FSST 0FCT0 0FCT0 0FCT0 0FCT0 0FCT0 0FCT0 0FCT07 0FCT0 / / / / -/ -/ Forged Carbon Steel Globe Valves - Class 00 - SW ASTM A0 API 0 / API Maximum Pressure 7 PSI Maximum Temperature 0º F NACE MR07 0FCW0 0FCW0 0FCW0 0FCW0 0FCW0 0FCW0 0FCW07 0FCW0 / / / / -/ -/ Forged Stainless Steel Globe Valves - Class 00 - NPT ASTM A/L API 0 / API Maximum Pressure 7 PSI Maximum Temperature 0º F NACE MR FSST0 0FSST0 0FSST0 0FSST0 0FSST07 0FSST0 / / -/ -/ 0 0FSST 0FSSW Forged Stainless Steel Globe Valves - Class 00 - SW ASTM A/L API 0 / API Maximum Pressure 7 PSI Maximum Temperature 0º F NACE MR07 0FSSW0 0FSSW0 0FSSW0 0FSSW0 0FSSW07 0FSSW0 / / -/ -/ 0 0FSSW Industrial Catalog

9 Forged Check Valves FCT Matco-Norca Model Number size Carton quantities inner master Forged Carbon Steel Lift Check Valves - Class 00 - NPT ASTM A0 API 0 / API Maximum Pressure 7 PSI Maximum Temperature 0º F NACE MR07 FCT FCW FCT0 FCT0 FCT0 FCT0 FCT0 FCT0 FCT07 FCT0 / / / / -/ -/ Forged Carbon Steel Lift Check Valves - Class 00 - SW ASTM A0 API 0 / API Maximum Pressure 7 PSI Maximum Temperature 0º F NACE MR FCW FCW0 FCW0 FCW0 FCW0 FCW0 FCW0 FCW07 FCW0 / / / / -/ -/ FSST Forged Stainless Steel Lift Check Valves - Class 00 - NPT ASTM A/L API 0 / API Maximum Pressure 7 PSI Maximum Temperature 0º F NACE MR07 FSST FSST0 FSST0 FSST0 FSST0 FSST07 FSST0 / / -/ -/ 0 FSSW Forged Stainless Steel Lift Check Valves - Class 00 - SW ASTM A/L API 0 / API Maximum Pressure 7 PSI Maximum Temperature 0º F NACE MR07 FSSW FSSW0 FSSW0 FSSW0 FSSW0 FSSW07 FSSW0 / / -/ -/ 0 Industrial Catalog Global sourcing. National compliance. Local service.

10 Cast Steel Gate, Globe & Check Valves 00CSF Matco-Norca Model Number size Flanged Cast Steel Gate Valve - 0LB. Maximum Pressure PSI ASTM A WCB Outside Screw & Yoke NACE MR07 Carton quantities inner master Maximum Temperature 000º F API 00 00CSF0 00CSF0 00CSF0 00CSF 00CSF 00CSF 00CSF 00CSF -/ CSF 0CSF Flanged Cast Steel Globe Valve - 0LB. Maximum Pressure PSI Maximum Temperature 000º F ASTM A WCB Outside Screw & Yoke NACE MR07 0CSF 0CSF0 0CSF0 0CSF0 0CSF 0CSF 0CSF 0CSF 0CSF -/ CSF Flanged Cast Steel Swing Check Valve - 0LB. Maximum Pressure PSI Maximum Temperature 000º F ASTM A WCB NACE MR07 CSF CSF0 CSF0 CSF0 CSF CSF CSF CSF CSF -/ Industrial Catalog

11 Stainless Steel - Gate, Globe, Check Valves, & Y Strainers 0SSTH Matco-Norca Model Number size Carton quantities inner master Stainless Steel Gate Valve - 00 PSI - NRS - NPT W.P. 00 WOG Maximum Temperature º F 0SSTH0 0SSTH0 0SSTH0 0SSTH0 0SSTH07 0SSTH0 / / -/ -/ SSTH 0SSTH Stainless Steel Globe Valve - 00 PSI - Rising Stem - NPT W.P. 00 WOG Maximum Temperature º F 0SSTH0 0SSTH0 0SSTH0 0SSTH0 0SSTH07 0SSTH0 / / -/ -/ SSTH 0SSTH Stainless Steel Swing Check Valve - 00 PSI - NPT W.P. 00 WOG Maximum Temperature º F 0SSTH0 0SSTH0 0SSTH0 0SSTH0 0SSTH07 0SSTH0 / / -/ -/ SSTH 70SSTH Stainless Steel Y Strainer - NPT W.P. 00 WOG 0 Mesh Screen Maximum Temperature º F 70SSTH0 70SSTH0 70SSTH0 70SSTH0 70SSTH07 70SSTH0 / / -/ -/ SSTH Industrial Catalog Global sourcing. National compliance. Local service.

12 Direct Mount Packages BEV Automated Ball Valve Packages BEV Series Ball Valve Pressure Rated for 000 WOG Complete Stainless Steel Construction FNPT End Connections PTFE Seats and Seals Full Ported EZ-Tork Actuator High Performance Pneumatic Actuator Double Acting and Spring Return ISO- Standard Double Acting Actuator Package / BEVBNB0NN00 BEVBNB0NN00 / BEVBNB0NN007 BEVBNB0NN007 BEVBNB0NN00 BEVBNB0NN00 -/ BEVCNB0NN0 BEVCNB0NN0 BEVDNB0NN00 BEVCNB0NN00 Spring Return Actuator Package / BEVCAB0NN0 BEVCDB0NN00 / BEVCAB0NN07 BEVCDB0NN007 BEVDAB0NN0 BEVCDB0NN00 -/ BEVFABNN BEVEDB0NN0 BEVFAB0NN0 BEVFDB0NN00 EZ Automated Ball Valve Packages EZ Series Ball Valve Pressure Rated for 000 WOG Complete Stainless Steel Construction FNPT End Connections PTFE Seats and Seals Full Ported EZ-Tork Actuator High Performance Pneumatic Actuator Double Acting and Spring Return ISO- Standard Double Acting Actuator Package / EZANB0NN00 EZANB0NN00 / EZBNB0NN00 EZANB0NN00 / EZBNB0NN00 EZBNB0NN00 / EZBNB0NN007 EZBNB0NN007 EZBNB0NN00 EZBNB0NN00 -/ EZCNB0NN0 EZCNB0NN0 -/ EZCNB0NN0 EZCNB0NN0 EZDNB0NN00 EZCNB0NN00 EZENB0NN00 EZENB0NN00 EZENB0NN00 EZENB0NN00 Spring Return Actuator Package / EZBAB0NN00 EZBDB0NN00 / EZBAB0NN00 EZBDB0NN00 / EZCAB0NN00 EZBDB0NN00 / EZCAB0NN007 EZCDB0NN007 EZDAB0NN00 EZCDB0NN00 -/ EZEAB0NN0 EZDDB0NN0 -/ EZFAB0NN0 EZEDB0NN0 EZFAB0NN00 EZFDB0NN00 EZENB0NN00 EZENB0NN00 EZENB0NN00 EZENB0NN00 Industrial Catalog

13 Direct Mount Packages BZ Automated Ball Valve Packages BZ Series Ball Valve Pressure Rated for 00 PSI Bronze Body (Not for Potable Water Use) SS Ball and Stem FNPT End Connections PTFE Seats and Seals EZ-Tork Actuator High Performance Pneumatic Actuator Double Acting and Spring Return ISO- Standard Double Acting Actuator Package / BZXANB0NN00 BZXANB0NN00 / BZXBNB0NN007 BZXBNB0NN007 BZXBNB0NN00 BZXBNB0NN00 -/ BZXCNB0NN0 BZXCNB0NN0 BZXCNB0NN00 BEVCNB0NN00 Spring Return Actuator Package / BZXBAB0NN00 BZXBDB0NN00 / BZXCAB0NN007 BZXBDB0NN007 BZXDAB0NN00 BZXCDB0NN00 -/ BZXEAB0NN0 BZXEDB0NN0 BZXFAB0NN00 BZXEDB0NN00 SB Automated Ball Valve Packages SB Series Ball Valve SS Construction Tri-Clamp End Connections Interior Finish of 0RA PTFE Seats and Seals Silicon Free Ideal for Food & Beverage EZ-Tork Actuator High Performance Pneumatic Actuator Double Acting and Spring Return ISO- Standard Double Acting Actuator Package / SBBNB0NN00 SBANB0NN00 / SBBNB0NN007 SBANB0NN007 SBBNB0NN00 SBBNB0NN00 -/ SBCNB0NN0 SBBNB0NN0 SBCNB0NN00 SBBNB0NN00 -/ SBDNB0NN0 SBDNB0NN0 SBENB0NN00 SBENB0NN00 SBFNB0NN00 SBENB0NN00 Spring Return Actuator Package / SBBAB0NN00 SBBDB0NN00 / SBBAB0NN007 SBBDB0NN007 SBCAB0NN00 SBCDB0NN00 -/ SBDAB0NN0 SBDDB0NN0 SBEAB0NN00 SBEDB0NN00 -/ SBGAB0NN0 SBFDB0NN0 SBHAB0NN00 SBHDB0NN00 SBHAB0NN00 SBHDB0NN00 Industrial Catalog Global sourcing. National compliance. Local service.

14 Direct Mount Packages BC Automated Ball Valve Packages BC Series Ball Valve Standard Fire Safe Certification to API 07 Anti-static ANSI 0# Flanged, Full Port Complete Stainless Steel Construction TFM00 Seat Material With Live-loaded Stem Packing Ensuring Seal-tight Pressure Containment Even Under Themal Cycling EZ-Tork Actuator High Performance Pneumatic Actuator Double Acting and Spring Return ISO- Standard Double Acting Actuator Package / BCBNB0NN00 BCBNB0NN00 / BCBNB0NN007 BCBNB0NN007 BCBNB0NN00 BCBNB0NN00 -/ BCCNB0NN0 BCCNB0NN0 BCDNB0NN00 BCDNB0NN00 -/ BCENB0NN0 BCENB0NN0 BCGNB0NN00 BCFNB0NN00 BCHNB0NN00 BCHNB0NN00 BCJNB0NN00 BCJNB0NN00 BCKNB0NN00 BCKNB0NN00 Spring Return Actuator Package / BCCAB0NN00 BCBDB0NN00 / BCCAB0NN007 BCCDB0NN007 BCDAB0NN00 BCDDB0NN00 -/ BCFAB0NN0 BCEDB0NN0 BCGAB0NN00 BCFDB0NN00 -/ BCHAB0NN0 BCHDB0NN0 BCIAB0NN00 BCIDB0NN00 BCJAB0NN00 BCJDB0NN00 BCMAB0NN00 BCLDB0NN00 BCMAB0NN00 BCMDB0NN00 MB Automated Ball Valve Packages MB Series Ball Valve Multi-Ported L-Port and T-Port Flow Paths SS Construction Full Port ANSI 0# Positive Shut-off on Any of the Three Ports EZ-Tork Actuator High Performance Pneumatic Actuator Double Acting and Spring Return ISO- Standard Double Acting Actuator Package MBXCNB0NN00 MBXBNB0NN00 -/ MBXDNB0NN0 MBXCNB0NN0 MBXENB0NN00 MBXDNB0NN00 -/ MBXENB0NN0 MBXENB0NN0 MBXFNB0NN00 MBXFNB0NN00 MBXHNB0NN00 MBXGNB0NN00 Spring Return Actuator Package MBXDAB0NN00 MBXDDB0NN00 -/ MBXFAB0NN0 MBXFDB0NN0 MBXHAB0NN00 MBXGDB0NN00 -/ MBXHAB0NN0 MBXHAB0NN0 MBXIAB0NN00 MBXIDB0NN00 MBXJAB0NN00 MBXIDB0NN00 Industrial Catalog

15 Direct Mount Packages MZ Automated Ball Valve Packages MZ Series Ball Valve Pressure Rated for 000 WOG Complete Stainless Steel Construction FNPT End Connections Positive Shut-off on Any of the Three Ports PTFE Seats and Seals Full Ported EZ-Tork Actuator High Performance Pneumatic Actuator Double Acting and Spring Return ISO- Standard Double Acting Actuator Package / MZXBNB0NN00 MZXBNB0NN00 / MZXBNB0NN00 MZXCNB0NN007 MZXCNB0NN00 MZXCNB0NN00 -/ MZXDNB0NN0 MZXCNB0NN00 MZXENB0NN00 MZXDNB0NN00 Spring Return Actuator Package / MZXDAB0NN00 MZXCDB0NN00 / MZXEAB0NN007 MZXDDB0NN007 MZXEAB0NN00 MZXEDB0NN00 -/ MZXFAB0NN0 MZXEDB0NN0 MZXHAB0NN00 MZXGDB0NN00 SL Butterfly Valve Series SL Series Butterfly Valve Available with EPDM or BUNA Seats Wafer or Lug Body ANSI 0# Body Style EZ-Tork Actuator High Performance Pneumatic Actuator Double Acting and Spring Return ISO- Standard Double Acting Actuator Package SLXXBNB0NN00 SLXXBNB0NN00 -/ SLXXBNB0NN0 SLXXBNB0NN0 SLXXCNB0NN00 SLXXCNB0NN00 SLXXDNB0NN00 SLXXCNB0NN00 SLXXFNB0NN00 SLXXFNB0NN00 SLXXHNB0NN00 SLXXHNB0NN00 0 SLXXINB0NN00 SLXXHNA0NN00 SLXXJNBBNN0 SLXXINB0NN0 Spring Return Actuator Package SLXXDAB0NN00 SLXXCDB0NN00 -/ SLXXDAB0NN0 SLXXCDB0NN0 SLXXEAB0NN00 SLXXDDB0NN00 SLXXFAB0NN00 SLXXFDB0NN00 SLXXIAB0NN00 SLXXHDB0NN00 SLXXJAB0NN00 SLXXJDB0NN00 0 SLXXKAB0NN00 SLXXKDB0NN00 SLXXLAB0NN0 SLXXLDB0NN0 Industrial Catalog Global sourcing. National compliance. Local service.

16 Stainless Steel Fittings SSF0, SSF0 0 LB. 0 & Stainless Steel Fittings Casting Conforms to ASTM A NPT Threads Conform to ASME B.0. ISO 00:00 Certified RoHS Compliant Fittings Meet Applicable Chemical & Physical Properties 0º Elbow, 0º Street Elbow, º Elbow, Tee, Hex Head Plug, Square Head Plug, Union, Cap, Coupling, Half Coulpling, Reducing Coupling, Bushing Sizes / - Diameter 0º Elbow 0º Street Elbow º Elbow Tee Hex Head Plug Square Head Plug Cap Union Coupling Half Coupling Reducing Coupling Bushing Industrial Catalog

17 Forged Steel Fittings & Branch Outlets FT Class 000 Forged Steel Fittings - Threaded Meets All Applicable ANSI & MSS Standards Material Conforms with ASTM A0N Material Test Reports (MTR S) Available 0º Elbow, º Elbow, Tee, Cross Sizes / - 0º Elbow º Elbow 0º Elbow FT, FTBU, FTHP, FTRP, FTSP, FW 0º Street Elbow Class 000 Forged Steel Fittings - Threaded & Socket Weld Meets All Applicable ANSI & MSS Standards Material Conforms with ASTM A0N Material Test Reports (MTR S) Available Threaded: 0º Elbow, 0º Street Elbow, º Elbow, Tee, Reducing Tee, Cross, Hex Head Plug, Square Head Plug, Round Head Plug, Union, Cap, Coupling, Half Coulpling, Reducing Coupling, Hex Bushing Socket Weld: 0º Elbow, º Elbow, Tee, Cross, Union, Cap, Coupling, Half Coulpling, Reducing Coupling, Reducing Insert Sizes / - 0º Elbow FT, FW º Elbow Class 000 Forged Steel Fittings - Threaded & Socket Weld Meets All Applicable ANSI & MSS Standards Material Conforms with ASTM A0N Material Test Reports (MTR S) Available Threaded: 0º Elbow, º Elbow, Tee, Union, Cap, Coupling, Half Coulpling Socket Weld: 0º Elbow, º Elbow, Tee, Union, Cap, Coupling, Half Coulpling, Reducing Insert Sizes / - T, SW, BW Forged Steel Branch Outlets - 000# Threaded & Socket Weld, Schedule 0 Butt Weld Material Conforms with ASTM A0N & MSS-SP-7 Straight Through Bore Design Material Test Reports (MTR S) Available Sizes / - Threaded Socket Weld Butt Weld Industrial Catalog Global sourcing. National compliance. Local service. 7

18 Weld Fittings & Flanges Long Radius 0º Elbow MN º Elbow Weld Fittings - Standard Weight & Extra Heavy Standard & Extra Heavy Wall Dimensions Conforms to ASTM / ASME A/SA -WPB ANSI B., B. and B. Long Radius 0º Elbow, Short Radius 0º Elbow, º Elbow, Tee, Reducing Tee, Cap, Concentric Reducer, Eccentric Reducer Sizes - Tee Reducing Tee Cap Concentric Reducer Eccentric Reducer MN00WF MN0BF MN MN0TF MN0LF Weld Flanges - 0 LB. & 00 LB. 0 LB. and 00 LB. Pressure Rating Conforms to ASTM / ASME A/SA 0 ANSI B. and B. 0 LB: Raised Face Blind, Flat Face Blind, Threaded Raised Face, Threaded Flat Face, Weld Neck Raised Face, XH Weld Neck Raised Face, Weld Neck Flat Face, Slip On Raised Face, Slip On Flat Face, Lap Joint Flat Face, Socket Weld Raised Face, XH Socket Weld Raised Face 00 LB: Raised Face Blind, Threaded Raised Face, Weld Neck Raised Face, XH Weld Neck Raised Face, Slip On Raised Face, Lap Joint Flat Face, Socket Weld Raised Face, XH Socket Weld Raised Face 0 LB: Sizes 00 LB: Sizes MN00SWF MN00SF Industrial Catalog

19 Stainless Steel & Schedule 0 Seamless Nipples SSN0, SSN0 0 & Stainless Steel Nipples Dimensions & Ends Conform to ASTM A7 Conforms to ASTM A Threads Conform to ASTM B.0. RoHS Compliant Material Test Reports (MTR S) Available Lead Free Sizes / - Diameter NXBS Schedule 0 Seamless Nipples Meets or Exceeds All Applicable ASTM & ANSI Standards Material Test Reports (MTRs) Available Schedule 0 ISO 00: 000 Lead Free Sizes / - Diameter Industrial Catalog Global sourcing. National compliance. Local service.

20 CALIFORNIA Fresca Dr., La Palma CA 0 Toll Free: --0 Fax: --07 CALIFORNIA - SVF Fresca Dr., La Palma CA 0 Toll Free: Fax: -0- TEXAS 0 Silber Rd., Houston TX 770 Toll Free: 00-- Fax: 7-0- ILLINOIS 7 Windy Point Dr., Glendale Heights, IL 0 Toll Free: --0 Fax: GEORGIA Industrial Blvd., Americus, GA 70 Toll Free: Fax: 00-- NEW YORK PO Box 7, R., Brewster NY 00 Toll Free: Fax: -7-0 WEB: mail@matco-norca.com WEB: sales@svf.net MNIND0

Direct Mount Packages

Direct Mount Packages 800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated

More information

Product Profile. Product Profile CALIFORNIA TEXAS ILLINOIS GEORGIA NEW YORK. Global sourcing. National compliance. Local service.

Product Profile. Product Profile CALIFORNIA TEXAS ILLINOIS GEORGIA NEW YORK. Global sourcing. National compliance. Local service. Product Profile CALIFORNIA TEXAS ILLINOIS GEORGIA NEW YORK Global sourcing. National compliance. Local service. 1 Introduction Matco-Norca is the leading supplier of globally sourced, code-compliant Plumbing

More information

FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES

FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES FORGED BRASS BALL VALVES 2-pc Full Port Forged Brass Ball Valve, Packing Gland Design, 600 WOG/150 WSP, MSS-SP-110 CSA, UL, FM, NSF61 and LP Gass Approved

More information

Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,

Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel, Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom

More information

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963 800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300

More information

Trunnion Ball Valve Catalogue

Trunnion Ball Valve Catalogue Trunnion Ball Valve Catalogue Introduction "Fusion" is the registered trademark of Archmetal Industries, a member of the Fortune Group. * The Fortune Group is a world class producer of a full range of

More information

Control Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM

Control Valve. 3-Piece 30, 60, or 1/8 Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM 324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for

More information

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963 800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Sizes ½"-36" Pressures Class Figure 150

More information

We Are the Worldwide Provider for All Your Valve and Fitting Needs

We Are the Worldwide Provider for All Your Valve and Fitting Needs Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for

More information

See our expanding selection of products on Product Portfolio

See our expanding selection of products on  Product Portfolio See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page

More information

We Are the Worldwide Provider for All Your Valve and Fitting Needs

We Are the Worldwide Provider for All Your Valve and Fitting Needs Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track

More information

SVF Flow Controls. Product Selection Guide Industrial High Pressure Flanged Hygienic Direct Mount C Series Specialty Valves Actuators Controls

SVF Flow Controls. Product Selection Guide Industrial High Pressure Flanged Hygienic Direct Mount C Series Specialty Valves Actuators Controls SVF Flow Controls VALVES ACTUATORS CONTROLS Product Selection Guide 2018 Industrial High Pressure Flanged Hygienic Direct Mount C Series Specialty Valves Actuators Controls SVF Flow Controls, LLC 5595

More information

LATEST ARRIVALS CATALOGUE STOCK

LATEST ARRIVALS CATALOGUE STOCK LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL

More information

See our expanding selection of products on Product Portfolio

See our expanding selection of products on  Product Portfolio See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page

More information

A. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.

A. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems. SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing

More information

Standard-Low Emission Valves to 100 PPM. A-Series Brass Appliance Valves CSA Approved; 1 & 2 piece Body Designs; Threaded & Flare End connections

Standard-Low Emission Valves to 100 PPM. A-Series Brass Appliance Valves CSA Approved; 1 & 2 piece Body Designs; Threaded & Flare End connections Standard-Low Emission Valves to 100 PPM Cast Steel Valves 150 2500 ASME; Gate, Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged, Butt-weld, RTG, End Connections;

More information

1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.

1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves. Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product

More information

TABLE OF CONTENTS. 2

TABLE OF CONTENTS. 2 TABLE OF CONTENTS HIGH PERFORMANCE BALL VALVES...PAGE 3 FIRE SAFE BALL VALVES...PAGE 6 SEAL WELD BALL VALVES...PAGE 9 MULTI PURPOSE BALL VALVES...PAGE 12 BUTTERFLY BALL VALVES...PAGE 17 MULTI-TURN VALVES...PAGE

More information

Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼

Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼ Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5

More information

505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial

505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial 505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F

More information

Clampette Products Global sourcing. National compliance. Local service.

Clampette Products Global sourcing. National compliance. Local service. Clampette Products C a l i f o r n i a T e x a s N e w Y o r k Patch Clamps Clampette is a United States manufacturer of stainless steel pipe repair clamps. We take great pride in the manufacturing and

More information

Customer Service : Tel Toll-free Fax

Customer Service : Tel Toll-free Fax Table Of Contents Terms and Engineering Data...2 Lead-Free Brass Ball Valves...3-4 TFP600-LF Full port, 2-piece body, lead-free, Threaded Ends...3 SFP600-LF Full port, 2-piece body, lead-free, Solder Ends...4

More information

Ball Valves & Accessories

Ball Valves & Accessories Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with

More information

Valves. Fittings. Actuators

Valves. Fittings. Actuators Valves Fittings Actuators Low Emission Valves to 50 PPM Cast Steel Valves 150 2500 ASME; CE Registered Gate, Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged,

More information

Lead-free valves for potable water systems. Rev 02/17

Lead-free valves for potable water systems. Rev 02/17 Lead-free valves for potable water systems. Rev 02/17 UltraPure for purer water. The new standard. Senate law S.3874 was passed January 4, 2011 and is effective January 4, 2014. The law regulates lead

More information

Contents. G Series stainless steel ball valves. F Series flanged ball valves. C Series carbon steel ball valves. B Series brass/bronze ball valves

Contents. G Series stainless steel ball valves. F Series flanged ball valves. C Series carbon steel ball valves. B Series brass/bronze ball valves Product Guide Contents H Series steel ball valves Product order code information 1.1 HM-3ART/LRT: reduced port, 3 piece, NPT, API 67 1.2 HM-3AFT/LFT: full port, 3 piece, NPT, API 67 1.3 HM-3AFSW/3LFSW:

More information

Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES

Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES SECTION 23 05 23 HVAC&R VALVES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes valves for building services piping. 1.2 GENERAL VALVE APPLICATION REQUIREMENTS: A. Provide valve handle extensions that

More information

Clampette Products NEW YORK TEXAS CALIFORNIA

Clampette Products NEW YORK TEXAS CALIFORNIA Clampette Products NEW YORK TEXAS CALIFORNIA Standing For Quality For Over 45 Years MADE IN THE U.S.A. Clampette is a major United States manufacturer of stainless steel pipe repair products. We take great

More information

Ask us about our 3 Year MAS Valve Limited Warranty

Ask us about our 3 Year MAS Valve Limited Warranty Fittings Actuators A-Series Brass Appliance Valves CSA Approved; 1 & 2 piece Body Designs; Threaded & Flare End connections B-Series Brass Ball Valves Full and Reduced Port Designs; ASTM 37700, Qualified

More information

PL-0111-CLAMPETTE Clampette

PL-0111-CLAMPETTE Clampette PL-0111-CLAMPETTE Clampette s Effective January 10, 2011 Patch and Full Wrap Clamps Available Available for iron pipe size, copper tube size and actual diameter size #304 Stainless Steel Band Temperature

More information

STANDARDS and SPECIFICATIONS

STANDARDS and SPECIFICATIONS ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)

More information

Approved Branded Traceable Fire Protection & Waterworks Valves

Approved Branded Traceable Fire Protection & Waterworks Valves Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper

More information

Brass, Bronze, Iron and Stainless Steel Valves

Brass, Bronze, Iron and Stainless Steel Valves Price Schedule June 1, 2011 Supersedes BIV-01-11 07 Brass, Bronze, Iron and Stainless Steel Valves ASTM B283 FORGED BRASS SCREW-IN BONNET NON-RISING STEM SOLID WEDGE DISC 125 WSP/200 WOG BRONZE GATE VALVES

More information

PRICE LISTS THE RIGHT CHOICE OUR CUSTOMERS COME FIRST 4061 CLOUGH WOODS DR. BATAVIA, OHIO 45103

PRICE LISTS THE RIGHT CHOICE OUR CUSTOMERS COME FIRST 4061 CLOUGH WOODS DR. BATAVIA, OHIO 45103 THE RIGHT CHOICE PRICE LISTS OUR CUSTOMERS COME FIRST 4061 CLOUGH WOODS DR. BATAVIA, OHIO 45103 www.ohiovalve.com (877) 423-2660 TOLL FREE (513) 752-5600 (513) 752-8267 FAX sales@ohiovalve.com 01/01/2018

More information

GWC Italia. Proven technology for individual valve solutions worldwide THREADED AND SOCKET WELD FLOATING BALL VALVES SBV-1002

GWC Italia. Proven technology for individual valve solutions worldwide THREADED AND SOCKET WELD FLOATING BALL VALVES SBV-1002 GWC Italia Proven technology for individual valve solutions worldwide THREADED AND SOCKET WELD FLOATING BALL VALVES SBV-1002 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w

More information

O IL & G AS INDUSTRIAL VALVES, ACTUATORS & ACCESORIES

O IL & G AS INDUSTRIAL VALVES, ACTUATORS & ACCESORIES O IL & G AS O IL & G AS License Number 6D-1724 FORGED STEEL Size Range Ball Valves API 6D / BS EN ISO 17292 Gate Valves Globe Valves API 602 / BS EN ISO 15761 Class 150-2500 / Class 800 ½ - 2 Check Valves

More information

GLOBAL VALVE PRODUCTS GENERAL PRODUCTS BROCHURE A DIVISION OF THE GLOBAL GROUP, INC.

GLOBAL VALVE PRODUCTS GENERAL PRODUCTS BROCHURE A DIVISION OF THE GLOBAL GROUP, INC. GLOBAL VALVE PRODUCTS GENERAL PRODUCTS BROCHURE A DIVISION OF THE GLOBAL GROUP, INC. Gate - API 603 Globe - API 603 Sizes 1/2-12 Class Figure # 150 GVP 1716 300 GVP 1736 Class Graphite Fig. # 150 GVP 1716

More information

DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES

DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES SECTION 15100 VALVES PART 1 DESIGN DIRECTIVE 1.1 SUMMARY A. This Section includes general duty valves common to most mechanical piping systems, special duty valves are specified in individual piping system

More information

PRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION

PRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes

More information

Fittings. Valves. Actuators

Fittings. Valves. Actuators Fittings Valves Actuators Low Emission Valves to 50 PPM Cast Steel Valves 150 2500 ASME; Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged, Butt-weld, RTG, End

More information

Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve

Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting

More information

May 2nd, 2008 LIST PRICE GUIDE. Please use in conjunction with our catalog below: WATERWORKS & IRRIGATION 2004 Catalog.

May 2nd, 2008 LIST PRICE GUIDE. Please use in conjunction with our catalog below: WATERWORKS & IRRIGATION 2004 Catalog. May 2nd, 2008 LIST PRICE Please use in conjunction with our catalog below: 2004 Catalog www.matco-norca.com COMMITTED TO QUALITY Visit Our Website: www.matco-norca.com e-mail: mail@matco-norca.com 2008

More information

SECTION FACILITY FUEL - NATURAL GAS PIPING AND SYSTEMS

SECTION FACILITY FUEL - NATURAL GAS PIPING AND SYSTEMS SECTION 23 11 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Fuel Pipe and Pipe Fittings - General 2. Steel Pipe and Fittings, Above Grade 3. Steel Pipe and Fittings, Below Grade 4. Polyethylene

More information

FROM SIMPLE TO COMPLEX DESIGNS. Flo-Tite Offers A Complete Line of High Quality Engineered Ball Valves For Your Most Demanding Applications

FROM SIMPLE TO COMPLEX DESIGNS. Flo-Tite Offers A Complete Line of High Quality Engineered Ball Valves For Your Most Demanding Applications SG-2013 BALL VALVES FROM SIMPLE TO COMPLEX DESIGNS Sanitary Valves Cryogenic Valves Automated Valves Fusible Link Valves Cavity Filled Valves V-Port Control Valves Dribble Control Valves Instrumentation

More information

3 PC FULL BORE BALL VALVE

3 PC FULL BORE BALL VALVE Pressure (Bar) 3 PC FULL BORE BALL VALVE 3 PC FULL BORE 1000PSI STAINLESS STEEL THREADED/SOCKET WELD END BALL VALVE Feature: 3 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working

More information

Ball Valves. Quality Valves at Low Cost

Ball Valves. Quality Valves at Low Cost Ball Valves Quality Valves at Low Cost Table of Contents B Series, 2, 3 PC Ball Valves Part Numbering System...3 B0: 2 PC, 000 WOG, 36SS... 4 B02: 2 PC, 2000/0 WOG, 36SS... 4 B03: 2 PC, 000 WOG, 36SS Direct

More information

Lead-free valves for potable water systems.

Lead-free valves for potable water systems. Lead-free valves for potable water systems. UltraPure for purer water. The new standard. On January 1, 2010, new laws went into effect that regulate lead content in plumbing products used for potable

More information

PRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES

PRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES WATER METERS VALVES & COCKS PRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES FILTER, REGULATOR & LUBRICATORS W IKA V I INSTRUMENTS

More information

A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide

A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide PDF processed with CutePDF evaluation edition www.cutepdf.com 3 Piece Valves Triad Series Models FP/SP-2000/3000

More information

BALL VALVES 4Evergreen Valve

BALL VALVES 4Evergreen Valve BALL VALVES 4Evergreen Valve 4E represents Excellent quality, Excellent delivery, Excellent service and all at an Excellent price. 4E valve was founded by a group of enthusiastic people with more than

More information

International Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas Ball Valve Product Summary

International Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas Ball Valve Product Summary International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320, Houston, Texas 77041 713-983-7600 Ball Valve Product Summary is a registered trademark of International Standard Valve, Inc. www.isvalve.com

More information

GO WITH THE FLOW! PRODUCT GUIDE TITAN FLOW CONTROL, INC. TITAN TELEPHONE: YOUR PIPELINE TO THE FUTURE!

GO WITH THE FLOW! PRODUCT GUIDE TITAN FLOW CONTROL, INC. TITAN TELEPHONE: YOUR PIPELINE TO THE FUTURE! TITAN 290 CORPORATE DRIVE LUMBERTON, NC 28358 WWW.TITANFCI.COM TITAN@TITANFCI.COM 910.735.0000 TEL 910.738.3848 FAX TITAN FLOW CONTROL PRODUCT GUIDE GO WITH THE FLOW! TITAN FLOW CONTROL, INC. YOUR PIPELINE

More information

Standard Port, Uni-Body Flanged Ball Valves

Standard Port, Uni-Body Flanged Ball Valves USA 800-766-0076 Fax 323-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Standard port, Uni-body design

More information

DM4500 Series. Three Piece Direct Mount Ball Valves STANDARDS FEATURES & BENEFITS OPTIONS

DM4500 Series. Three Piece Direct Mount Ball Valves STANDARDS FEATURES & BENEFITS OPTIONS DM4500 Series STANDARDS Valve design: ASME B16.34 Material certification: EN10204-3.1 MTR End connections: ASME B16.11, ASME B1.20.1, ASME B16.25 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve

More information

MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE

MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,

More information

High Performance Butterfly Valves

High Performance Butterfly Valves Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6

More information

Gate Valve (Model 1000)

Gate Valve (Model 1000) Gate Valve (Model 1000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com

More information

INTERNATIONAL BALL VALVES, BUTTERFLY VALVES, V-PORT BALL VALVES, KNIFE GATE VALVES FUSIBLE LINK PACKAGES, ACTUATORS & VALVE AUTOMATION

INTERNATIONAL BALL VALVES, BUTTERFLY VALVES, V-PORT BALL VALVES, KNIFE GATE VALVES FUSIBLE LINK PACKAGES, ACTUATORS & VALVE AUTOMATION INTERNATIONAL BALL VALVES, BUTTERFLY VALVES, V-PORT BALL VALVES, KNIFE GATE VALVES FUSIBLE LINK PACKAGES, ACTUATORS & VALVE AUTOMATION SOLENOID VALVES, CONTROL VALVES, SANITARY VALVES, PVC VALVES AMERICAN

More information

A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide

A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide 3 Piece Valves Triad Series Models FP/SP-2000/3000 / Valve Sizes: Model FP: 1/4 through 4 Model SP: 3/4

More information

BRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0.

BRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. 195 Series Ball Valves BRASS BALL VALVES CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass body Blow-out nickel plated

More information

Triad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard

Triad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek

More information

Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation. Motion & Flow Control Products, Inc

Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation. Motion & Flow Control Products, Inc Valve Products Ball Valves Direct Mount Multi-port Sanitary Valve Automation INLINE BALLVALVE.COM Inline has been supplying innovative valve solutions to the process industry for nearly twenty years. Our

More information

Milliken Valve offers the following for your water and wastewater needs:

Milliken Valve offers the following for your water and wastewater needs: Milliken Valve offers the following for your water and wastewater needs: s Series 601/600 Flanged & MJ Series 601S Stainless Steel Series 601RL Rubber Lined Series 602 High Pressure Series 613A Threaded

More information

Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation BALLVALVE.COM

Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation BALLVALVE.COM Valve Products Ball Valves Direct Mount Multi-port Sanitary Valve Automation INLINE BALLVALVE.COM Inline has been supplying innovative valve solutions to the process industry for nearly twenty years. Our

More information

OUR ASSETS OUR SCOPE OF SUPPLY. Ball Valves Gate Valves Globe Valves Control Valves Check Valves Butterfly Valves Plug Valves Special Valves

OUR ASSETS OUR SCOPE OF SUPPLY. Ball Valves Gate Valves Globe Valves Control Valves Check Valves Butterfly Valves Plug Valves Special Valves Driving Energy Since its establishment, Ringo Válvulas has designed and manufactured its own cast and forged valves. Our experience over 30 years on the valve industry is the key of our success and recognition,

More information

GWC Valve International

GWC Valve International GWC Valve International PROVEN TECHNOLOGY FOR INDIVIDUAL VALVE SOLUTIONS WORLDWIDE QUALITY VALVE PRODUCTS: BALL CAST STEEL FORGED STEEL BUTTERFLY PLUG WAFER CHECK NEEDLE & GAUGE F L O A T I N G B A L L

More information

Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI

Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical

More information

KVC VALVES AND PEX FITTINGS

KVC VALVES AND PEX FITTINGS KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (

More information

FILTERS, STRAINERS AND VALVES PRODUCT GUIDE

FILTERS, STRAINERS AND VALVES PRODUCT GUIDE FILTERS, STRAINERS AND VALVES PRODUCT GUIDE TEE FILTERS INLINE FILTERS BRASS FILTERS SPIN ON FILTERS OFF-LINE FILTRATION Y STRAINERS BASKET STRAINERS DUPLEX STRAINERS STRAINING ELEMENTS FRP STRAINERS DUAL

More information

SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.

SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems. SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000

More information

QUALITY YOU CAN BUILD ON CONDENSED CATALOG

QUALITY YOU CAN BUILD ON CONDENSED CATALOG QUALITY YOU CAN BUILD ON CONDENSED CATALOG Pressed for time? JUST PRESS, CRIMP AND TRIPLE YOUR PRODUCTIVITY 1. Reduce installation time up to 68% with Hammonds s extensive new line of UltraPress press-connection

More information

Carbon Steel Nipples

Carbon Steel Nipples CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 WWW.SMITHCOOPER.COM FAX (323) 890-4456 Carbon Steel Nipples Schedule 40 & 80 Welded, Schedule 80 Seamless, & XXH Seamless Carbon Steel Nipples Specifications

More information

International Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas

International Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas - International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320, Houston, Texas 77041 713-983-7600 TM Ball Valve Product Summary is a registered trademark of International Standard Valve, Inc.

More information

Valve Selection. 1. Function and service considerations

Valve Selection. 1. Function and service considerations 1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.

More information

VALVES SHOP.CHEMOILPRODUCTS.COM SHOP.CHEMOILPRODUCTS.

VALVES SHOP.CHEMOILPRODUCTS.COM SHOP.CHEMOILPRODUCTS. VALVES FITTINGS & STAINLESS STEEL BALL VALVES CAMLOCKS SPECIFICATIONS: ALUMINUM, SS, BRASS, & D. I. GRAVITY CASTING A-A-59326 STANDARDS NBR SEAT MATERIAL 50 PSI TO 250 PSI SIZE 3/4 TO 8 TYPE B F COUPLER

More information

HIGH PERFORMANCE BUTTERFLY VALVE

HIGH PERFORMANCE BUTTERFLY VALVE Revised 11/17/2017 HIGH PERFORMANCE BUTTERFLY VALVE LCS-6822 (Class 150) LCS-7822 (Class 300) APPLICATIONS Ideally suited for commercial, industrial, and mechanical HVAC services. Use in other applications

More information

Suggested Specifications

Suggested Specifications ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance

More information

FLANGES & GASKETS. ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A

FLANGES & GASKETS. ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A FLANGES & GASKETS Most of the flanges have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below).

More information

GENERAL CATALOGUE Catalogue 2013

GENERAL CATALOGUE Catalogue 2013 GENERAL CATALOGUE Catalogue 2013 Company Profile GALA - Extends Business on a Global Perspective. GALA company offers a wide range of products and systems in the field of valves, piping, and seismic isolation

More information

SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES

SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES

More information

catalog C-NPS-1014 NIBCO Press System

catalog C-NPS-1014 NIBCO Press System catalog C-NPS-1014 ahead of the flow NIBCO Press System Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and

More information

LCS6822 (Class 150) LCS7822 (Class 300)

LCS6822 (Class 150) LCS7822 (Class 300) Revision 8/22/2012 high performance butterfly valve LCS6822 (Class 150) LCS7822 (Class 300) APPLICATIONS Ideally suited for Commercial, Industrial and Mechanical HVAC Services. Use in other applications

More information

Union County Vocational - Technical Schools Scotch Plains, New Jersey

Union County Vocational - Technical Schools Scotch Plains, New Jersey SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Brass ball valves. 2. Iron swing check valves. 3. Iron gate valves. 4. Iron globe valves. B.

More information

15100 VALVES. E. Section Building Automation and Control System Guidelines

15100 VALVES. E. Section Building Automation and Control System Guidelines 15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955

More information

MANUFACTURING SPECIFICATION

MANUFACTURING SPECIFICATION Swage Nipples, Bull Plugs & Oil Country Fittings Catalogue SWAGE NIPPLES, BULL PLUGS, OIL COUNTRY FITTINGS, COUPLINGS, LOW TEMP & STAINLESS SWAGES MANUFACTURING SPECIFICATION CSP Products Ltd, manufactures

More information

VALVES. A. Section HVAC Basic Materials and Methods. E. Section Building Automation and Control System Guidelines

VALVES. A. Section HVAC Basic Materials and Methods. E. Section Building Automation and Control System Guidelines 230523 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 230500 HVAC Basic Materials and Methods B. Section 230510 Chilled Water System C. Section 230520 Heat Generation D. Section 238216 Coils E.

More information

SECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.

SECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping. SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves

More information

V Series Control Port Ball Valves

V Series Control Port Ball Valves Triac V Series Ball Valves are ideal for achieving more precise control with the simplicity and sealing features of a ball valve. We offer them 1/2 4 in a 3-piece design and 1/2 6 flanged. The standard

More information

SUBMITTAL PACKAGE FIRE PROTECTION VALVES

SUBMITTAL PACKAGE FIRE PROTECTION VALVES SUBMITTAL PACKAGE FIRE PROTECTION VALVES Butterfly Valves Ductile Iron Grooved...pg 2-5 Grooved Check Valves...pg 6-8 OS&Y Valves...pg 9-12 ARGCO.com 800-854-1015 Updated 2/27/2017 ARGCO GROOVED BUTTERFLY

More information

2 PC FULL BORE BALL VALVE

2 PC FULL BORE BALL VALVE Pressure (Bar) 2 PC FULL BORE 1000PSI STAINLESS STEEL THREADED BALL VALVE Feature: 2 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working Pressure: 1000 PSI / 2000 PSI Threaded

More information

GWC Italia. Proven technology for individual valve solutions worldwide FSV-1005

GWC Italia. Proven technology for individual valve solutions worldwide FSV-1005 GWC Italia Proven technology for individual valve solutions worldwide forged STEEL VALVES GATE, GLOBE & CHECK FSV-1005 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w w. g w

More information

CRYOGENIC. Italian Manufactured, Italian Quality

CRYOGENIC. Italian Manufactured, Italian Quality Italian Manufactured, Italian Quality CRYOGENIC Via Di Vittorio 307/25-20099 Sesto San Giovanni (MI) - Italy Tel: +39.028.976.1628 - Fax: +39.028.976.2167 www.sestovalves.com - sales@sestovalves.com Introduction

More information

FEATURES ONE VALVE DOES IT ALL IDEAL FOR YOUR VALVE... OR OURS SURE STOP MOUNTING PLATE BALL OR BUTTERFLY VALVES

FEATURES ONE VALVE DOES IT ALL IDEAL FOR YOUR VALVE... OR OURS SURE STOP MOUNTING PLATE BALL OR BUTTERFLY VALVES Fusible Link Valves for Fire Protection Systems IDEAL FOR YOUR VALVE... OR OURS In addition to high-quality designs for BI-TORQ s own API 0 fire rated valves, we have manufactured customized assemblies

More information

Full Traceability. Material Specification. Raw Material Code. Heat Treatment

Full Traceability. Material Specification. Raw Material Code. Heat Treatment All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification

More information

Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...

Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR... Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI

More information

115 Series, Needle Valves, Single Block, Male x Male

115 Series, Needle Valves, Single Block, Male x Male 115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,

More information

flowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request

flowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals

More information

SECTION PLUMBING PIPING VALVES AND ACCESSORIES PART 1 - GENERAL

SECTION PLUMBING PIPING VALVES AND ACCESSORIES PART 1 - GENERAL SECTION 22 10 10 PLUMBING PIPING VALVES AND ACCESSORIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and

More information

TRUNNION BALL VALVES. TBV 7.10

TRUNNION BALL VALVES.     TBV 7.10 TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in

More information

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING SUNY GENESEO 220523-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply

More information