Installation Operation Maintenance. LSSN Butterfly Valve AGA Approved 50MM - 150MM. QAD#IM6055.REVA

Size: px
Start display at page:

Download "Installation Operation Maintenance. LSSN Butterfly Valve AGA Approved 50MM - 150MM. QAD#IM6055.REVA"

Transcription

1 LSSN Butterfly Valve Installation Operation Maintenance Licence Number:

2 Index 1. INTRODUCTION 1.1 Design Features Flange and Pipe Compatibility Operating Restrictions Product Storage Product Marking 5 2. INSTALLATION INFORMATION 2.1 Installation Instructions Manual Operator Installation 8 3. MAINTENANCE AND REPAIR 9 4. ASSEMBLY /DISASSEMBLY INSTRUCTIONS 9 5. TECHNICAL 5.1 Dimensions and Weights Torque CV Valves - Sizing Trouble Shooting Warranty 12 2

3 1. INTRODUCTION 1.1 DESIGN FEATURES Designed for use in AGA type 1 applications Emergency or appliance isolation valves. Available in lugged design only Wafer not available for AGA gas application. Flange holes comply with AS2129 E & ANSI Class 125/150 dimensions. The face-to-face dimensions are designed to comply with ISO5752, BS5155. Through-shaft design. Disc-to-seat interface provides bubble-tight shut-off with reduced torque and extended service life. Factory tested to 110% of full rated pressure in both directions before shipping. STEM RETAINING SYSTEM The stem is securely contained in the body by means of a retaining washer and circlip situated on top of the shaft and fixed into a groove in the body. For maintenance, with only a small hand tool, the circlip can be removed, the shaft then withdrawn, and the valve easily dismantled. STEM BUSHING Heavy duty Acetal bushing aligns and supports the stem and absorbs side thrust STEM SEAL Double - U cupseal design is self-adjusting and gives positive sealing in both directions to prevent external substances from entering the stem area. STEM & DISC DRIVE CONNECTION "Challenger features all the benefits of a high strength one piece through stem design. The disc drive connection is achieved by using a close tolerance Double D arrangement. One piece high strength stem design No disc retaining screws or pins 3

4 SEAT "Challenger valves are designed with a unique seat locking feature and a full encapsulating liner providing seat retention features which virtually guarantee elimination of any seat movement during both seating and unseating operations. CHALLENGER VALVES HAVE PRIMARY AND SECONDARY SEALING FEATURES The primary seal is obtained by an interference fit of the unique moulded seat flat with the disc hub with the seat firmly retained within the body recess. Sealing capabilities do not rely on external flanging. The secondary seals are achieved by having an interference fit between the stem diameter and the seat hole, plus further added pressure from the moulded "O rings. These three sealing actions are unique in the design to achieve higher pressure ratings and virtually guarantee the prevention of any line media from escaping into the body/shaft area. 1.2 FLANGE AND PIPE COMPATIBILITY Challenger Butterfly Valves are designed to fit between the following piping flanges: AS2129 Table E Lugged Pattern ANSI 125 Cast iron flanges ANSI 150 Steel flanges Note: When installing valves in schedule 80 piping, make sure the valve is properly centered between the pipe flanges to prevent disc edge damage since the clearance between the disc O.D. and the pipe I.D. is reduced. If there is a compatibility question, compare the minimum pipe I.D. 1.3 OPERATING RESTRICTIONS Pressure Range: 1050kpa for AGA applications Temperature Range: 18 C to 100 C 1.4 PRODUCT STORAGE The valves should be stored with the disc in the partially open position. The valves should be stored indoors in a clean, dry, well-ventilated place away from corrosive materials and protected from excessive dust and dirt. The valves should be stored on a rack or pallet off the floor and arranged to prevent damage during handling. Keep valves out of direct sunlight and in a cool location to prolong elastomer life. Valves should be protected to prevent damage to the flange faces, disc sealing edge and operator. 4

5 1.5 PRODUCT MARKING All Challenger Butterfly Valves are equipped with an identification tag attached to the valve neck. This tag provides the model number, max pressure rating, valve materials and unique serial number. The valve neck also provides the size of the valve. 2. INSTALLATION INFORMATION Challenger butterfly valves are designed for use between the faces of AS2129 E & ANSI 125 and 150 pound flat, raised face, slip-on or weld-neck flanges at the pressure indicated on the nameplate. Flange gaskets should not be used. Consideration should be given to the proper piping alignment prior to the installation of any cast iron lug bodied valve. All Challenger butterfly valves are bi-directional with the ability to control flow equally in either direction. 2.1 INSTALLATION INSTRUCTIONS Step 1. Check to make sure that the pipe flange and valve sealing faces are clean and free from any debris (pipe scale, welding slag, etc.). Step 2. Check the valve nameplate to ensure that the pressure and valve materials are correct for the application. WARNING! Butterfly valves should never be installed where service conditions could exceed the valve ratings. Failure to heed warning may result in personal injury or property damage. Step 3. The seat sealing face on the butterfly valves is wider than the valve body providing a leak proof seal when compressed between pipe flanges. Therefore, no flange gaskets are required when installing any butterfly valve. Step 4. To prevent damage to the disc sealing edge before installation, position the disc in the partially open position (Figure 1) so that the disc is still contained within the valve body. FIGURE 1. VALVE IN PARTIALLY OPEN POSITION 5

6 INSTALLATION INSTRUCTIONS Step 5. Spread the pipe flanges apart allowing the valve to be supplied easily in between the flanges. Step 6. Centre the valve between the flanges and loosely install all flange bolts. (Consult table 1 for the correct flange bolt size and quantity) TABLE 1. FLANGE BOLTING Size mm AS2129 E M16 X 2.0 M16 X 2.0 M 16 X 2.0 M 16 X 2.0 M16 X 2.0 M20 X 2.5 PCD No. Holes ASA125/150 UNC 5/8 UNC 5/8 UNC 5/8 UNC 5/8 UNC 3/4 UNC 3/4 PCD No. Holes Step 7. Slowly open the valve to the full open position (see figure 2) and back to the partially open position ensuring that the disc moves freely without any obstruction. If no obstruction is encountered, return the valve to full open position and hand tighten all flange bolts using the bolt tightening sequence shown in figure 3. FIGURE 2. VALVE IN FULL OPEN POSITION FIGURE 3. BOLTING SEQUENCE Step 8. Rotate the disc from the fully open position to the fully closed position and make sure that the valve is properly centred and the disc edge does not make contact with the pipe ID. Return the disc to the full open position and tighten the flange bolts following the bolt tightening sequence shown in Figure 3. Do not fully tighten each flange bolt all at once. Tighten each bolt incrementally. several times. Continually cycle the valve from fully open to fully closed to ensure that there is proper disc clearance. 6

7 Step 9. Bolts on flanges are not to be tightened to the extent where the flange is in contact with the body of the valve. The unique O-Ring sealing design allows positive sealing without the over tightening of the bolts. Over tightening of the bolts results in excessive valve torques restricting operation of the valve and potentially damaging the rubber seal. A gap should be visible after the bolts are tightened (see figure 4) (Refer to Table 2 for recommended bolt tensions). FIGURE 4. O-RING SEALING DESIGN Flange Face Upon flange loading the Double Moulded O-Ring surface area has been calculated to provide sufficient compression to firmly lock and secure liner into mechanical dovetail joint, ensuring effective sealing and reduced torques. Required Gap between Liner & Flange TABLE 2. RECOMMENDED BOLT TENSIONS Valve Size Torque Ft-Ibs The torque figures contained within this table are based on maximum pressure differentials listed for the product as noted, using standard discs, stems, body and materials of construction at ambient temperatures. Torque figures have reasonable safety factors for normal service, but for valves poorly handled, stored, installed or In service for extended periods of time, may have a dramatic effect on actual torque ratings, additionally for severe or special applications consult Challenger Valves and Actuators. 7

8 2.2 MANUAL OPERATOR INSTALLATION LEVER HANDLE MOUNTING PROCEDURE Step 1. First, start by loosely assembling the notch plate on the valve top plate. The notch plate should be installed with the notches in the first quadrant of the valve top plate with the stop tabs at the 12 o clock and 3 o clock position. The notch plate should be installed with the stop tabs pointing upward (Figure 5). Step 2. Next, install the handle so that the lever fully engages in the notches when the lever is released and tighten the handle set screw. Step 3. Compress the handle lever and position the disc so that the valve is in the fully closed position. Align the last notch on the notch plate at the 3 o clock position with the handle lever and tighten the notch plate screws. Step 4. Compress the handle lever and position the disc so that the valve is in the fully open position and release the lever. The lever should line-up with the first notch on the notch plate at the 12 o clock position. FIGURE 5. NOTCH PLATE INSTALLATION POSITION 8

9 3. MAINTENANCE AND REPAIR Challenger butterfly valves are designed for extended service with minimal wear and servicing. No regular lubrication is required. Prior to any replacement or repair, the valve must be removed from the line following these precautions: The pipeline on either side of the valve must be depressurized and drained. Ensure that the disc is in the partially open or full closed position before removing the valve from the line. DO NOT remove a lever operator from the valve while the line is still pressurized. 4. ASSEMBLY/DISASSEMBLY INSTRUCTIONS The Challenger butterfly valves have field replaceable parts. Once the valve is removed from the line, inspect the parts for wear. If valve parts show wear, replacement is necessary. Contact your local distributor for a replacement parts. DISASSEMBLY 1. Close the valve to the almost closed position and remove from pipeline. 2. Remove the operator (notch plate, lever, gearbox unit or actuator). 3. Remove internal circlip (Part No.8) 4. Pull the stem (Part No.4) out through the top of the ISO top mounting flange 5. The disc is then remove by pushing the disc (Part No.3) out side the liner (Part No.2) 6. Remove the liner by collapsing and pushing out the valve body ASSEMBLY 1. Insert the liner by collapsing and pushing into valve body 2. Ensure the smaller hole in the liner, is align with the bottom hole in the valve body 3. Insert shaft seal (Part No.5) and thrust bearing (Part No.6) into the neck 4. Lubricate the disc and stem with a silicone base grease 5. Push the disc into the liner with the internally flatten side hole at the bottom 6. Align the top hole with the matching hole in the liner 7. Insert the shaft (Part No.4) small end first, and push through the disc until fully home. 8. Replace washer (Part No.7) and circlip (Part No.8) 9. Replace valve operator

10 5. TECHNICAL D B A E F H G J C 5.1 VALVE DIMENSIONS MOUNTING DIMENSIONS AND WEIGHTS Size MM A B C D E ISO 5211 F07 F07 F07 F07 F07 F07 PCD Bolting X4 M8 M8 M8 M8 M8 M8 Shaft ISO Lugged KGs F G H J FLANGE DRILLING AND TAPPING INFORMATION Size MM AS2129 E M16 X 2.0 M16 X 2.0 M16 X 2.0 M16 X 2.0 M16 X 2.0 M20 X 2.5 PCD No. Holes ASA125/150 UNC 5/8 UNC 5/8 UNC 5/8 UNC 5/8 UNC 3/4 UNC 3/4 PCD No. Holes

11 5.2 TORQUE CAN BE DETERMINED BY THE FOLLOWING: TORQUE Challenger Butterfly valve Torque chart are for Buna-N seats. Multiply this torque by the application factor x Operates once per week or more x Operates once per month x Operates once per 3 months The charted torques valves given are the total of all internal frictions. The effects of dynamic torsion is not considered in this chart. Torsional capability of valve shafts is not considered in this chart. All torques valve testing was done with standard seats. Size (Nm) Cv VALVES - VALVE SIZING Size FLOW CO-EFFICIENTS Cv is defined as the volume of water in US gallons per minute that will flow through a given restriction or valve opening with a pressure drop of one psi at room temperature. To convert Cv to Kv divide by

12 5.4 TROUBLE SHOOTING: PROBLEM CAUSES REMEDIES Leakage between valve and handle. Stem seal leak. Clean or replace stem seal. Stem packing loose. Check stem seal, bush, washer and cir-clip are installed. Leakage past disc when closed. Disc has travelled past fully closed or not fully closed. Adjust notch plate and handle. Disc is worn or damaged. Clean or replace disc. Rubber seat is worn or damaged. Replace Seat (field replaceable) Leakage between valve and flange. Flange bolts are to loose. Tighten flange bolts as per recommended bolt tensions. Valve body seal damaged. Replace Seat (Field replaceable) Incompatible flange connection Check flange standard is the same as valve flange standard. Valve too hard to open or close. Foreign material jammed in valve Clean & remove obstructions Corroded valve parts Disassemble & clean valve parts. (Stem, Disc, Body) Flange bolts too tight creating Back off flange bolts and tighten bubble seat and disc groove. as per recommended bolt tensions. 5.5 WARRANTY This warranty covers faults in the products construction, material and assembly. Products which are within 12 months from the date of purchase and are found to be defective after inspection by a Challenger authorised representative in construction, material or assembly will be repaired or exchanged with an equivalent product free of charge (at the discretion of Challenger) Warranty Conditions: 1.The installation of the product is in accordance with the instructions provided. 2. Proof of purchase (including date of purchase) is provided. 3. The product has not been used in an unsuitable or improper manner. 4. The product has not been affected by inadequate or lack of maintenance. 5. The product has not been affected by unsuitable media, chemical or electrical influences. 6. Application does not exceed the max allowable temperature. 7. Pressure does not exceed 1050kpa 8. Installation is subject to the requirements of the applicable regulatory authority. 12

Installation Operation Maintenance

Installation Operation Maintenance Installation Operation Maintenance www.challengervalves.com.au 1 QAD#IM1015 REVC 3.10.15 Index 1. INTRODUCTION 3 1.1 Design Features 1.2 Flange and Pipe Compatibility 3 1.3 Operating Pressures and Temperatures

More information

LC149 SERIES BUTTERFLY VALVE INSTALLATION, OPERATION, & MAINTENANCE

LC149 SERIES BUTTERFLY VALVE INSTALLATION, OPERATION, & MAINTENANCE LC149 SERIES BUTTERFLY VALVE INSTALLATION, OPERATION, & MAINTENANCE APOLLO BFV INSTALLATION MANUAL - Page 2 of 12 INTRODUCTION... 3 DESIGN FEATURES... 3 OPERATING PRESSURES... 3 PRODUCT STORAGE... 3 PRODUCT

More information

Double Offset High Performance Butterfly Valve

Double Offset High Performance Butterfly Valve Double Offset High Performance Butterfly Valve INSTALLATION OPERATION MAINTENANCE APOLLO INTERNATIONAL HIGH PERFORMANCE BFV IOM - Page 2 of 20 TABLE OF CONTENTS INTRODUCTION 3 PRODUCT STORAGE 3 PRODUCT

More information

Cover Page - Butterfly Valves Ordering Information Design Features, 2 to 12 Design Features, 2 to 12 (continued)

Cover Page - Butterfly Valves Ordering Information Design Features, 2 to 12 Design Features, 2 to 12 (continued) DESCRIPTION Cover Page - Butterfly Vs Ordering Information Design Features, 2 to 2 Design Features, 2 to 2 (continued) Design Features, 2 to 2 (continued) Design Features, 4 to 4 CV Chart, 2 to 4 Torque

More information

25mm-500mm (1"- 20") SERIES 20/21 Wafer/Lug BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED. The High Performance Company

25mm-500mm (1- 20) SERIES 20/21 Wafer/Lug BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED. The High Performance Company BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED SERIES 20/21 Wafer/Lug 25mm-500mm (1"- 20") The High Performance Company SERIES 20 25mm 500mm (1" 20") Bray Controls is proud to offer a high quality

More information

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company BUTTERFLY VALVES RESILIENT SEATED SERIES 30/31 Wafer/Lug 2-20 (50mm-500mm) The High Performance Company SERIES 30/31 2-20 (50mm-500mm) Bray Controls is proud to offer a high quality line of butterfly valves

More information

2"- 20" (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company

2- 20 (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company butterfly valves resilient seated series 30/31 Wafer/Lug 2"- 20" (50mm-500mm) The High Performance Company SERIES 30 2" 20" (50mm 500mm) Bray Controls is proud to offer a high quality line of butterfly

More information

2"- 20" (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company

2- 20 (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company butterfly valves resilient seated series 30/31 Wafer/Lug 2"- 20" (50mm-500mm) The High Performance Company SERIES 30 2" 20" (50mm 500mm) Bray Controls is proud to offer a high quality line of butterfly

More information

2"- 20" (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES CELEBRATING. The High Performance Company

2- 20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES CELEBRATING. The High Performance Company BUTTERFLY VALVES RESILIENT SEATED SERIES 30/31 Wafer/Lug 2"- 20" (50mm-500mm) CELEBRATING Y E A R S The High Performance Company SERIES 30 2" 20" (50mm 500mm) Bray Controls is proud to offer a high quality

More information

1-20 (25mm-500mm) SERIES 20/21 Wafer/Lug SANITARY AND CHEMICAL / RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company

1-20 (25mm-500mm) SERIES 20/21 Wafer/Lug SANITARY AND CHEMICAL / RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED SERIES 20/21 Wafer/Lug 1-20 (25mm-500mm) The High Performance Company SERIES 20 1-20 (25mm-500mm) Bray Controls is proud to offer a high quality

More information

Installation & Operation Manual

Installation & Operation Manual Installation & Operation Manual Thank you for purchasing our AS4795.1 Butterfly Valve. Before installing or operating, please carefully read this manual to know thoroughly how to install or operate. The

More information

CENTER LINE. INSTALLATION and MAINTENANCE INSTRUCTIONS RESILIENT SEAT BUTTERFLY VALVES MANUAL AND AUTOMATED

CENTER LINE. INSTALLATION and MAINTENANCE INSTRUCTIONS RESILIENT SEAT BUTTERFLY VALVES MANUAL AND AUTOMATED INSTALLATION and MAINTENANCE INSTRUCTIONS MANUAL AND AUTOMATED RESILIENT SEAT BUTTERFLY VALVES CONTENTS Introduction Valve Description... Valve Design Features... Flange and Pipe Schedule Compatibility...

More information

LARGE DIAMETER VALVES

LARGE DIAMETER VALVES Butterfly Valves TABLE OF CONTENTS E00-STI STANDARD VALVES The 400/500 have been specifically designed for heavy duty on-off throttling from 2-4 in diameter. Completely weather proof and rugged design

More information

KEYSTONE. Butterfly valves Figure 9 Installation & Maintenance Instructions. Please read these instructions carefully

KEYSTONE. Butterfly valves Figure 9 Installation & Maintenance Instructions.  Please read these instructions carefully KEYSTONE Please read these instructions carefully This symbol indicates important messages and safety instructions. Hazard potentials: disregarding of instructions improper use of product insufficiently

More information

Keystone Series GR resilient seated butterfly valves GRW/GRL Installation and operation manual

Keystone Series GR resilient seated butterfly valves GRW/GRL Installation and operation manual Before installation these instructions must be fully read and understood Important Before valves are installed or used the following actions are recommended. 1. Valves/parts have to be inspected and thoroughly

More information

KEYSTONE Figure 990/991 Butterfly valves Installation, operation and maintenance instructions

KEYSTONE Figure 990/991 Butterfly valves Installation, operation and maintenance instructions Before installation these instructions must be fully read and understood Potentially dangerous practices: disregarding instructions improper use of product use of insufficiently qualified personnel Application

More information

KEYSTONE OPTISEAL F14/16-15/17 AND BREWSEAL BUTTERFLY VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS

KEYSTONE OPTISEAL F14/16-15/17 AND BREWSEAL BUTTERFLY VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS Before installation these instructions must be fully read and understood 4. Ozone: storage rooms should not contain any equipment generating ozone. E.g. lamps, electric motors. IMPORTANT Before valves

More information

Installation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822

Installation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822 Installation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822 Statements: NIBCO High Performance Butterfly Valves, Series 6822 and 7822, have been designed

More information

Dura Water Wafer Butterfly Valve

Dura Water Wafer Butterfly Valve Dura Water Wafer Butterfly Valve Specifications Recommended use Features Working Pressure The Dura butterfly valve is a soft sealing valve for installation with flanges drilled in accordance with AS 2129

More information

KEYSTONE SERIES 320 BUTTERFLY VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS

KEYSTONE SERIES 320 BUTTERFLY VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS Before installation these instructions must be fully read and understood HAZARD POTENTIALS disregarding of instructions improper use of product insufficiently qualified personnel Valve application to be

More information

Flow Control. Before installation or maintenance, these instructions must be fully read and understood.

Flow Control. Before installation or maintenance, these instructions must be fully read and understood. Before installation or maintenance, these instructions must be fully read and understood. Please read these instructions carefully. This symbol indicates important messages and safety instructions. Potentially

More information

Recommended BFV Installation, Maintenance & Repair Procedures Ultraflo 300 & 400 Series Valves

Recommended BFV Installation, Maintenance & Repair Procedures Ultraflo 300 & 400 Series Valves I. Introduction Recommended BFV Installation, Maintenance & Repair Procedures Ultraflo 300 & 400 Series Valves A. Butterfly Valve Seat / Disc Function The seat in most resilient-seated butterfly valves

More information

RESILIENT SEATED CARTRIDGE STYLE BFV S

RESILIENT SEATED CARTRIDGE STYLE BFV S INTRODUCTION This instruction manual includes installation, operation, maintenance, and engineering information for resilient seated cartridge style butterfly valves. This manual addresses manually operated

More information

VSI, LLC SERIES 2100 RESILIENT SEATED BUTTERFLY VALVES INSTALLATION, OPERATION AND MAINTENANCE MANUAL

VSI, LLC SERIES 2100 RESILIENT SEATED BUTTERFLY VALVES INSTALLATION, OPERATION AND MAINTENANCE MANUAL VSI SERIES 2100 RESILIENT SEATED BUTTERFLY VALVES VSI, LLC. 2-0 SERIES 2100 RESILIENT SEATED BUTTERFLY VALVES INSTALLATION, OPERATION AND MAINTENANCE MANUAL Publication: V2100- August 2016 TABLE OF CONTENTS

More information

Butterfly valves Figure 56 Installation & Maintenance Instructions

Butterfly valves Figure 56 Installation & Maintenance Instructions KEYSTONE Please read these instructions carefully This symbol indicates important messages and safety instructions. Hazard potentials: disregarding of instructions improper use of product insufficiently

More information

Keystone Butterfly valves ParaSeal Installation and maintenance instructions

Keystone Butterfly valves ParaSeal Installation and maintenance instructions Before installation these instructions must be fully read and understood Please read these instructions carefully Hazard potentials: disregarding of instructions improper use of product insufficiently

More information

NYL Resilient Seated Butterfly Valves Operation and Maintenance Instructions

NYL Resilient Seated Butterfly Valves Operation and Maintenance Instructions COMMERCIAL Bray Controls Commercial Division 13788 West Road, Suite 200A Houston, Texas 77041 BCDSales@Bray.com Phone: 1-888-412-2729 Fax: 1-888-412-2720 www.braycommercialdivision.com NYL Resilient Seated

More information

F low L ine 72/73 Wafer & Lug Style Sizes 2-24

F low L ine 72/73 Wafer & Lug Style Sizes 2-24 F low L ine 72/73 Wafer & Lug Style Sizes 2-24 Cartridge Seated Butterfly Valves KEY FEATURES Body One piece wafer and lugged body for strength and stability in extreme environments Wafer bodies have a

More information

Series 8500 Grayline Butterfly Valves

Series 8500 Grayline Butterfly Valves Series 8500 Grayline Butterfly Valves Features State-of-the-Art Manufacturing: Valves are produced using state-of-the-art manufacturing equipment. Each valve is tested to 110% of rated working pressure

More information

CompoSeal butterfly valves, wafer style Installation & Maintenance Instructions

CompoSeal butterfly valves, wafer style Installation & Maintenance Instructions Please read these instructions carefully This symbol indicates important messages and safety instructions. Intended valve use The valve is intended to be used only in applications within the pressure/temperature

More information

BUTTERFLY VALVE 17 SERIES Gearbox

BUTTERFLY VALVE 17 SERIES Gearbox DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2

More information

IOM Manual. IOM Manual. Series 76/77.

IOM Manual. IOM Manual. Series 76/77. IOM Manual IOM Manual Series 76/77 www.flowlinevalves.com Flow Line Valve and Controls, L.L.C. 110 Main Project Road Schriever, LA 70395 P.O. Box 677 Schriever, LA 70395 Phone 985-414-6004 * Toll Free

More information

BUTTERFLY VALVE VF-7 Series

BUTTERFLY VALVE VF-7 Series BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm

More information

RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com

RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N

More information

KEYSTONE SERIES GRF RESILIENT SEATED BUTTERFLY VALVES INSTALLATION AND OPERATION MANUAL

KEYSTONE SERIES GRF RESILIENT SEATED BUTTERFLY VALVES INSTALLATION AND OPERATION MANUAL Before installation these instructions must be fully read and understood Intended valve use The valve is intended to be used only in applications within the pressure/temperature limits indicated in the

More information

MUELLER ECCENTRIC PLUG VALVE

MUELLER ECCENTRIC PLUG VALVE MUELLER INSTALLATION, OPERATING and MAINTENANCE INSTRUCTIONS 1 MUELLER System Design The life of the valve is dependent on its application, frequency of use and freedom from misuse. The properties of the

More information

Keystone resilient seated butterfly valves Figure 221 and 222

Keystone resilient seated butterfly valves Figure 221 and 222 Figure 221 and 222 An economical bonded resilient seated butterfly valve for bi-directional and end-of-line service F221 Wafer style valve F222 Lugged style valve Features Bubble tight shut-off at full

More information

McCannalok HIGH PERFORMANCE BUTTERFLY VALVE OPERATION AND MAINTENANCE MANUAL. The High Performance Company

McCannalok HIGH PERFORMANCE BUTTERFLY VALVE OPERATION AND MAINTENANCE MANUAL. The High Performance Company McCannalok HIGH PERFORMANCE BUTTERFLY VALVE OPERATION AND MAINTENANCE MANUAL The High Performance Company Table of Contents Safety Information - Definition of Terms... 1 Introduction... 1 Installation...

More information

Butterfly Valve. Product Training Presentation Danfoss Flomatic Corporation

Butterfly Valve. Product Training Presentation Danfoss Flomatic Corporation Click to see: Butterfly Valves in our Online Catalog Butterfly Valve Product Training Presentation Danfoss Flomatic Corporation REV:082303 Butterfly Valve SYLAX SERIES 149G BUTTERFLY VALVES Wafer and Lug

More information

KEYSTONE PN16 DOUBLE FLANGED BUTTERFLY VALVE FIGURE 631

KEYSTONE PN16 DOUBLE FLANGED BUTTERFLY VALVE FIGURE 631 The F631 PN16 is a bi-directional, double flanged, resilient seated butterfly valve FEATURES Approved to AS/NZS 4020, making the F631 suitable for use in potable water applications. Type tested in accordance

More information

The Belimo Butterfly Valves

The Belimo Butterfly Valves The Belimo Butterfly Valves Belimo D(U)6..series Butterfly Valves are designed to meet the stringent needs of HVAC applications requiring positive shutoff for liquids. Valve design features 2 1 7 To satisfy

More information

Keystone Figure V11 Butterfly Valve Installation, Operation and Maintenance Manual

Keystone Figure V11 Butterfly Valve Installation, Operation and Maintenance Manual Please read these instructions carefully - indicates that it may lead to injuries or damages on the properties. Warning - indicates that it may lead human body to serious injuries. Danger - indicates that

More information

NEOTECHA NEOSEAL BUTTERFLY VALVE INSTALLATION AND MAINTENANCE INSTRUCTIONS

NEOTECHA NEOSEAL BUTTERFLY VALVE INSTALLATION AND MAINTENANCE INSTRUCTIONS Before installation these instructions must be fully read and understood 2 SAFETY Please also read through these notes carefully. 2.1 General potential danger due to: a. Failure to observe the instructions

More information

Standard Valves Series Globe Valves Series Angle Valves Series Way-Valves

Standard Valves Series Globe Valves Series Angle Valves Series Way-Valves Installation, Operation, Maintenance Instructions Standard Valves Series 035 000 Globe Valves Series 031 000 Angle Valves Series 033 000 3-Way-Valves 1 GENERAL INFORMATION These instructions are designed

More information

DEMCO Resilient Seated Butterfly Valve

DEMCO Resilient Seated Butterfly Valve Page 1 of 12 DEMCO Resilient Seated Butterfly Valve Page 2 of 12 Published May 2000 DEMCO is a trademark of Cooper Cameron Corporation Cooper Cameron Corporation, Cooper Cameron Valves Division, 2000.

More information

Bray/Mckannalok Butterfly Valve Series 40/41/42/43/44/45 Installation Manual Technical Bulletin No Date: May 2004/Page 1 of 6

Bray/Mckannalok Butterfly Valve Series 40/41/42/43/44/45 Installation Manual Technical Bulletin No Date: May 2004/Page 1 of 6 Date: May 2004/Page 1 of 6 Bray/McCannalok Butterfly Valves Installation and Maintenance Instructions ANSI Classes 150 and 300 - Sizes 2-1/2 through 24 ANSI Classes 600 - Sizes 3 through 16 Bidirectional

More information

KEYSTONE FIGURE 9 BUTTERFLY VALVE

KEYSTONE FIGURE 9 BUTTERFLY VALVE A resilient seated butterfly valve for general purpose applications FEATURES Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two

More information

2-12 Grooved End Dual Disc Check Valve. Operation, Maintenance and Installation Manual

2-12 Grooved End Dual Disc Check Valve. Operation, Maintenance and Installation Manual Manual No. DDCV-OM4-1 2-12 Grooved End Dual Disc Check Valve Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF OPERATION... 1 INSTALLATION... 2

More information

GRINNELL Model B303 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description

GRINNELL Model B303 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description Worldwide Contacts www.grinnell.com GRINNELL Model B Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Model B Butterfly Valves provide for efficient

More information

MK Series - High Performance Butterfly Valves Operation and Maintenance Instructions

MK Series - High Performance Butterfly Valves Operation and Maintenance Instructions COMMERCIAL Bray Controls Commercial Division 13788 West Road, Suite 200A Houston, Texas 77041 BCDSales@Bray.com Phone: 1-888-412-2729 Fax: 1-888-412-2720 www.braycommercialdivision.com MK Series - High

More information

YOUR GLOBAL FLOW CONTROL PARTNER. BRAY/MCCANNALOK EN High Performance Butterfly Valve Operation and Maintenance Manual

YOUR GLOBAL FLOW CONTROL PARTNER. BRAY/MCCANNALOK EN High Performance Butterfly Valve Operation and Maintenance Manual YOUR GLOBAL FLOW CONTROL PARTNER BRAY/MCCANNALOK EN High Performance Butterfly Valve TABLE OF CONTENTS 1.0 Definition of Terms....................................... 2 2.0 Introduction...........................................

More information

14 and Larger Wafer and Lug Style Dual Disc Check Valve. Operation, Maintenance and Installation Manual

14 and Larger Wafer and Lug Style Dual Disc Check Valve. Operation, Maintenance and Installation Manual Manual No. DDCV-OM2-2 14 and Larger Wafer and Lug Style Dual Disc Check Valve Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF OPERATION... 1 INSTALLATION...

More information

butterfly valves high performance TRIPLE OFFSET HP-TRI REV0

butterfly valves high performance TRIPLE OFFSET HP-TRI REV0 high performance EXECUTION 1st OFFSET 2nd OFFSET 3rd OFFSET The BELVEN-TRI series incorporate triple offset disc configuration. With this configuration the disc seal makes contact with body seat, only

More information

BrewSeal butterfly valves Wafer and lugged

BrewSeal butterfly valves Wafer and lugged Wafer and lugged KEYSTONE Resilient seated butterfly valves DN40-DN800 wafer and lugged versions, optimized for the food and beverage industry. Features Top bushing absorbs actuator side thrust loads.

More information

The HiLok high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.

The HiLok high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. The HiLok high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck length according HeizAnlV. External

More information

A. This Section includes general duty valves common to several HVAC piping systems.

A. This Section includes general duty valves common to several HVAC piping systems. SECTION 23 05 23 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply

More information

DEMCO DEMCO RESILIENT SEATED BUTTERFLY VALVE. Installation, Operation and Maintenance Manual D I S T R I B U T E D V A L V E S DEM-RSBV-IOM

DEMCO DEMCO RESILIENT SEATED BUTTERFLY VALVE. Installation, Operation and Maintenance Manual D I S T R I B U T E D V A L V E S DEM-RSBV-IOM DEMCO RESILIENT SEATED BUTTERFLY VALVE DEMCO TABLE OF CONTENTS DEMCO RESILIENT SEATED BUTTERFLY VALVE Bill of Materials... 1 Scope... 3 Nameplate Information... 3 Storage... 3 Installation... 4 End-of-Line

More information

Operating & Maintenance Manual For Steam Conditioning Valve

Operating & Maintenance Manual For Steam Conditioning Valve For Steam Conditioning Valve 1 Table of Contents 1.0 Introduction 3 2.0 Product description 3 3.0 Safety Instruction 4 4.0 Installation and Commissioning 5 5.0 Valve Disassembly 6 6.0 Maintenance 6 7.0

More information

I-VIC300MS. Vic -300 MasterSeal Butterfly Valves WARNING SERIES 761

I-VIC300MS. Vic -300 MasterSeal Butterfly Valves WARNING SERIES 761 warning Read and understand all instructions before attempting to install, remove, adjust, or perform maintenance on any Victaulic piping products. Depressurize and drain piping systems before attempting

More information

Installation, Operation, and Maintenance Manual

Installation, Operation, and Maintenance Manual Industrial Process Installation, Operation, and Maintenance Manual Series PBFV Plastic Lined Butterfly Valve - Lug and Wafer Style Table of Contents Table of Contents Introduction and Safety...2 Safety

More information

Keystone Butterfly Valve Figure 9

Keystone Butterfly Valve Figure 9 A resilient seated butterfly valve for general purpose applications Features Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two

More information

DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES

DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES Table of Contents DESCRIPTION PAGE Standard Compliance... 2 Advantages... 3 Resilient Seat Exploded View... 4 Fire Safe Seat Exploded View... 5 CLASS 15

More information

Dura Gas Butterfly Valve

Dura Gas Butterfly Valve Dura Gas Butterfly Valve Specifications Recommended use The Dura butterfly valve is a soft sealing valve for installation with flanges drilled in accordance with AS 2129 Table E. Engineered for longterm,

More information

Installation, Operation, and Maintenance Manual

Installation, Operation, and Maintenance Manual Industrial Process Installation, Operation, and Maintenance Manual Series PBV Plastic Lined Ball Valve Table of Contents Table of Contents Introduction and Safety...2 Safety message levels...2 User health

More information

Bray/McCannalok High Performance Butterfly Valve Operation and Maintenance Manual

Bray/McCannalok High Performance Butterfly Valve Operation and Maintenance Manual Bray/McCannalok High Performance Butterfly Valve Operation and Maintenance Manual Table of Contents Definition of Terms 1 Introduction 1 Installation 1 Maintenance 2 Stem Seal Replacement 4 Seat Replacement

More information

Scope. Applicability. Caution. I & M CV3000 Series. Storage. Installation & Maintenance Instructions for Marwin CV3000 Series Three Piece Ball Valves

Scope. Applicability. Caution. I & M CV3000 Series. Storage. Installation & Maintenance Instructions for Marwin CV3000 Series Three Piece Ball Valves I & M CV3000 Series 3170 Wasson Road Cincinnati, OH 45209 USA Phone 513-533-5600 Fax 513-871-0105 marwin@richardsind.com www.marwinvalve.com Installation & Maintenance Instructions for Marwin CV3000 Series

More information

DEMCO Resilient-Seated Butterfly Valve

DEMCO Resilient-Seated Butterfly Valve Document Number: TC003001-01 Revision: Rev 2 DEMCO Resilient-Seated Butterfly Valve Installation, Operation, and Maintenance Manual TABLE OF CONTENTS BILL OF MATERIALS... 3 SCOPE... 5 NAMEPLATE INFORMATION...

More information

DOUBLE OFFSET BUTTERFLY VALVE

DOUBLE OFFSET BUTTERFLY VALVE Flange STD: ASME CLASS 150 LB ASME CLASS 300 LB Temp :210 ~29 Work pressure: VF-91_/92_/93_ 2 ~48 150LB VF-94_/95_/96_ 2 ~24 300LB Pd. date 2011.5 Please read all of these instructions before installing

More information

introduction FK Series Butterfly Valves Product Data Sheet

introduction FK Series Butterfly Valves Product Data Sheet Product Data Sheet introduction < STANDARDS > ASTM D4101-86 ASTM D1784 ASTM D3222 IPEX FK Series Butterfly Valves offer superior strength and chemical resistance in highly corrosive environments and process

More information

Keystone Figure 85/86 Check valves Installation and Maintenance Instructions

Keystone Figure 85/86 Check valves Installation and Maintenance Instructions Please read these instructions carefully 1.3 Handling 1.3.1 Packed valves Lifting and handling of the packed valves in crates should be carried out by appropriate lifting equipment. If a fork lift truck

More information

Crispin Valves Operating Guide. Crispin

Crispin Valves Operating Guide. Crispin Crispin Valves Operating Guide Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick, PA 18603 1-800-AIR-VALV T: (570) 752-4524 F: (570) 752-4962 www.crispinvalve.com sales@crispinvalve.com

More information

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

More information

Butterfly Valve Type 57P

Butterfly Valve Type 57P Butterfly Valve Type 57P Contents Lever Type: 50-200 mm (2-8 ) Body Material: CPVC Gear Type: 50-200mm (2-8 ) Body Material: CPVC (1) Be sure to read the following warranty clauses of our product 1 (2)

More information

SECTION VALVES

SECTION VALVES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:

More information

KEYSTONE SERIES GR RESILIENT SEATED BUTTERFLY VALVES GRW/GRL INSTALLATION AND OPERATION MANUAL

KEYSTONE SERIES GR RESILIENT SEATED BUTTERFLY VALVES GRW/GRL INSTALLATION AND OPERATION MANUAL Before installation these instructions must be fully read and understood IMPORTNT Before valves are installed or used the following actions are recommended. 1. Valves/parts have to be inspected and thoroughly

More information

introduction FE Series Butterfly Valves Product Data Sheet

introduction FE Series Butterfly Valves Product Data Sheet Product Data Sheet introduction < STANDARDS > ASTM D1784 IPEX FE Series Butterfly Valves incorporate many features of our industrial FK valve, yet the all PVC construction and EPDM liner make this valve

More information

These installation and maintenance instructions must be read in full and completely understood before the installation!

These installation and maintenance instructions must be read in full and completely understood before the installation! These installation and maintenance instructions must be read in full and completely understood before the installation! 1. General information on the installation and maintenance instructions These instructions

More information

CUSTOM COMBINATION AIR VALVE

CUSTOM COMBINATION AIR VALVE INSTALLATION / OPERATION / MAINTENANCE CUSTOM COMBINATION AIR VALVE INTRODUCTION This manual will provide you with the information to properly install and maintain this valve to ensure a long service life.

More information

GRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description

GRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description Technical Services -00- +-0--0 www.grinnell.com GRINNELL Model B0 and Model BN0 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Models B0 and BN0

More information

NEOTECHA NTB-NTC BALL VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS

NEOTECHA NTB-NTC BALL VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS Before installation these instructions must be fully read and understood 2 SAFETY Please also read through these notes carefully. 2.1 General potential danger due to: a. Failure to observe the instructions

More information

SERIES 2200 Replaceable Seat Butterfly Valves

SERIES 2200 Replaceable Seat Butterfly Valves SERIES 2200 Replaceable Seat Butterfly Valves Publication S2200-101 Issue 04/18 Rev. A Design Characteristics Multiple Seat Options VSI offers various seat options including EPDM, NBR, Viton, and others

More information

SERIES 2100 Resilient Seated Butterfly Valves

SERIES 2100 Resilient Seated Butterfly Valves SERIES 2100 Resilient Seated Butterfly Valves Publication S2100-101 Issue 06/16 Rev. C Design Characteristics Applications Commercial Heating & Air Conditioning Waste Water & Water Treatment Sea Water

More information

Series 820 AWWA Butterfly Valves

Series 820 AWWA Butterfly Valves Series 820 AWWA Butterfly Valves Installation, Operation and Maintenance September 2015 SP-820-IOM-0915A Series 820 AWWA Butterfly Valves Installation, Operation and Maintenance Contents General.....3

More information

Val-Matic 3-Way Tapered Plug Valve

Val-Matic 3-Way Tapered Plug Valve Val-Matic 3-Way Tapered Plug Valve Manual No. CCPV-OM4-1 Operation, Maintenance and Installation Manual INTRODUCTION.2 RECEIVING AND STORAGE 2 VALVE CONSTRUCTION..2 DESCRIPTION OF OPERATION. 3 INSTALLATION

More information

KEYSTONE. Check valves Figure 85/86 Installation & Maintenance Instructions. Figure 85. Figure 86.

KEYSTONE. Check valves Figure 85/86 Installation & Maintenance Instructions. Figure 85. Figure 86. KEYSTONE Please read these instructions carefully. This symbol indicates important messages and safety instructions. Hazard potentials: disregarding of instructions improper use of product insufficiently

More information

PROCESS DEVELOPMENT & CONTROL LLC 1075 MONTOUR WEST INDUSTRIAL PARK CORAOPOLIS, PENNSYLVANIA PHONE (724) FAX (724)

PROCESS DEVELOPMENT & CONTROL LLC 1075 MONTOUR WEST INDUSTRIAL PARK CORAOPOLIS, PENNSYLVANIA PHONE (724) FAX (724) 1075 MONTOUR WEST INDUSTRIAL PARK CORAOPOLIS, PENNSYLVANIA 15108 PHONE (724) 695-3440 FAX (724) 695-8635 INSTALLATION, OPERATION AND MAINTENANCE FOR 2 THRU 14, SERIES 09 ECON-O-TROL VALVE WITH LOCK LEVER

More information

Butterfly Valves. watts.com

Butterfly Valves. watts.com Butterfly Valves watts.com Durafil is a registered trademark of Cargill, Limited. Teflon is a registered trademark of the E.I. Dupont de Nemours & Company, Incorporated. Uniseal is a registered trademark

More information

Split Body Valves with Bellows Seal Series Globe Valves Series Angle Valves Series Way-Valves

Split Body Valves with Bellows Seal Series Globe Valves Series Angle Valves Series Way-Valves Installation, Operation, Maintenance Instructions Split Body Valves with Bellows Seal Series 025 300 Globe Valves Series 027 300 Angle Valves Series 028 300 3-Way-Valves 1 GENERAL INFORMATION These instructions

More information

OPERATION AND MAINTENANCE INSTRUCTIONS

OPERATION AND MAINTENANCE INSTRUCTIONS OPERATION AND MAINTENANCE INSTRUCTIONS 334 SERIES THREE-PIECE BALL VALVES 1/4 to 2-1/2 Installation and Operation Always install your valve according to accepted industry standards and practices and operate

More information

Power-Seal High Performance Butterfly Valve: Series P1 Installation & Maintenance Manual

Power-Seal High Performance Butterfly Valve: Series P1 Installation & Maintenance Manual CAUTION: 1. For your safety read this manual completely before installation or servicing. 2. Before installing or servicing, please ensure the line pressure has been relieved, and any hazardous fluids

More information

INSTRUCTION MANUAL RECTANGULAR BUTTERFLY VALVE 3-SIDED SEAT

INSTRUCTION MANUAL RECTANGULAR BUTTERFLY VALVE 3-SIDED SEAT RECT-6-0700 INSTRUCTION MANUAL RECTANGULAR BUTTERFLY VALVE 3-SIDED SEAT Introduction...2 Discussion of Operation...3 Discussion of Maintenance...3 Seat Adjustment...3 Seat Replacement...3 Thrust Bearing

More information

PDC Elastomer Lined Series 27 Butterfly Valve 2" thru 36" for 125/150 lb. Flanging

PDC Elastomer Lined Series 27 Butterfly Valve 2 thru 36 for 125/150 lb. Flanging PDC Elastomer Lined Series 27 Butterfly Valve 2" thru 36" for 125/150 lb. Flanging General Description: The PDC "Elastomer Lined" series butterfly valves are available in both full lug and wafer styles.

More information

Keystone Figure 9 Butterfly Valve

Keystone Figure 9 Butterfly Valve A resilient seated butterfly valve for general purpose applications Features Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two

More information

butterfly valves Quality, Service A history of and Innovation

butterfly valves Quality, Service A history of and Innovation A history of Quality, Service and Innovation Now in its ninth decade, Conbraco Industries, Inc. is a leading manufacturer of flow control products for U.S. and international markets. The company s headquarters

More information

Installation, Operation and Maintenance Manual for the HE Series

Installation, Operation and Maintenance Manual for the HE Series Installation, Operation and Maintenance Manual for the HE Series High Performance Butterfly Valve "Double Offset" CONTENT IOM-HP-100614-1 1. INTRODUCTION 1.1 GENERAL NOTE 1.2 STRUCTURE & TYPE 1.3 OPERATION

More information

High Performance Butterfly Valves

High Performance Butterfly Valves Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6

More information

Val-Matic 1-4 Combination Air Valve (Single Housing Type)

Val-Matic 1-4 Combination Air Valve (Single Housing Type) Manual No. ARCO-OM1-3 Val-Matic 1-4 Combination Air Valve (Single Housing Type) Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF OPERATION... 1

More information

Mounting and Operating Instructions EB 8135/8136 EN. Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil

Mounting and Operating Instructions EB 8135/8136 EN. Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil Type 3535 Three-way Valve with bellows seal and rod-type yoke (partial view) Mounting and Operating Instructions EB 8135/8136 EN Edition

More information

KEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES

KEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES 310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve FEATURES GENERAL APPLICATION High performance applications such as steam, chill water, water, utility lines, gasoline,

More information

I-VIC300MS. Series 761 Vic-300 MasterSeal Carbon Steel Butterfly Valve Series 461 Vic-300 MasterSeal Stainless Steel Butterfly Valve WARNING

I-VIC300MS. Series 761 Vic-300 MasterSeal Carbon Steel Butterfly Valve Series 461 Vic-300 MasterSeal Stainless Steel Butterfly Valve WARNING INSTALLATION AND MAINTENANCE INSTRUCTIONS I-VIC300MS Series 761 Vic-300 MasterSeal Carbon Steel Butterfly Valve Series 61 Vic-300 MasterSeal Stainless Steel Butterfly Valve SERIES 761 SERIES 61 Read and

More information