model product guide features contents 110 t (120 USt) Lift Capacity 397 mton-m (2,880 ft-kips) Maximum Load Moment

Transcription

1 features 0 t (0 USt) ift Capacity 397 mton-m (,880 ft-kips) Maximum oad Moment 70, m (30 ft) eavy-ift 8,3 m (70 ft) Fixed Jib on eavy-ift 94,5 m (30 ft) uffing Jib on eavy-ift 47 kw (33 P) engine 63 mpm (535 fpm) line speed 80 kg (46,700 lb) Maximum ine Pull 400 kg (5,00 lb) Rated ine Pull kg (5,000 lb) Material Rehandling Clamshell capacity Fast, efficient self-assembly and disassembly Manitowoc Crane CARE comprehensive support model 000 product guide contents Specifications Outline Dimensions Transport Data Crane Assembly Performance Data oad Chart Notes Combinations Range Diagrams and oad Charts Clamshell Crane CARE

2 notes model 000

3 specifications Upperworks Engine ino PC-UN, 6 cylinder, water-cooled diesel, direct fuel injection with turbocharger, 47 kw (33 P) at 000 high-idle RPM. Maximum torque 300 N m (959 lb ft) net at,500 rpm (SAE J 349). One diesel fuel tank, 400 liters (05 gallons) capacity. Two volt 36 A capacity batteries, 4 volt system and 50 amp alternator. All wiring harnesses and connectors are numbered for easier servicing. Machine is equipped with individual fused branch circuits. Controls Full-flow hydraulic control system for constant variable pressure to front and rear drums, boom hoist brakes and clutches. Controls respond instantly to the touch, delivering smooth function operation. Relief valve pressures: oad hoist, boom hoist and propel system kg/cm (4,480 psi) Swing system kg/cm, (3,980psi) Control system kg/cm (,40 psi) ydraulic System Drums Front and rear drums for load hoist powered by hydraulic variable displacement piston-type motors, driven through planetary reducers. Powered hoisting/lowering and free-fall operation is standard. Drum turn indicators for front and rear drums are also standard. Brake & Clutches (compatible): Forced-circulation oilcooled wet-type multi-disc brakes, each using positive and negative actuation. An external ratchet is fitted for locking the drums. Drums: (front and rear) 63 mm (4.") P.C.D. X 6 mm (4.5") wide drums, grooved for 6.0 mm (.0") wire rope. Wire rope capacity: Front drum 60 m (853 ft) working length Rear drum 30 m (754 ft) working length Storage length (each drum) 53 m (830') ine speed: Single line on the first drum layer oisting: m/min (394 ft/min) owering: m/min (394 ft/min) Optional third drum: same dimensions and specifications as front and rear drums. Wire rope working length is 40 m (787'). Swing System 3 All four variable displacement piston-type pumps are driven by a heavy-duty pump drive. One of these pumps is used in the right propel circuit and hook hoist circuit, and can accommodate an optional third circuit. Another is used in the left propel circuit and hook hoist circuit. The third variable displacement pump is used in the boom hoist circuit. The fourth variable displacement pump is used in the swing circuit. In addition, two gear pumps are used in the control system and auxiliary equipment, and two gear pumps serve the brake cooling system. Maximum pressure rating kg/cm (4,640 psi) oad hoist, boom hoist and propel... Piston pumps oist Piston pump Swing Piston pump Control system and auxiliary Gear pumps Brake cooling system Gear pumps Reservoir capacity: liter ( US gallon). Cooling: Oil-to-air heat exchanger (plate-fin type). Filtration: Full-flow and bypass type with replaceable paper element. Swing unit: Powered by a hydraulic piston-type motor driving spur gears through planetary reducers, the swing system provides 360 rotation. Swing brake: A spring-set, hydraulically released multiple-disc brake is internally fitted in swing motor. Swing lock: Position lock for transportation. Rotating bed turntable: Single-row ball bearing with an integral internally cut swing gear. Swing speed:.7 rpm Support System Single drum powered by a hydraulic axial piston motor through a planetary reducer. Brake: A spring-set, hydraulically released multipledisc brake is internally fitted in the boom hoist motor and operated through a counter-balance valve. An external ratchet is fitted for locking the drum. Drum: Single drum, grooved for 0 mm (3/6") dia. wire rope. oist reeving is 0-part line. model 000

4 specifications 4 Wire Rope Capacity: Drum 55 m (508 ft) working length. ine speed: Single line on the first drum layer oisting m/min (57 ft/min) owering m/min (57 ft/min) Gantry This high folding type gantry is fitted with a sheave frame for boom hoist reeving. It provides full up, full down positions. Counterweight UNIT WEIGT TOTA WEIGT QTY. ITEM kg lb kg lb Counterweight A 0 000, ,050 Counterweight B , ,870 Counterweight C 0 000, ,050 Counterweight TOTA ,970 All potential warnings, including battery charge, engine oil pressure, air cleaner, engine oil filter, control main pressure, and hydraulic oil temperature will appear on the monitor display when a fault occurs. Safety device Function lock lever, anti-two-block, boom over hoist limit switch, boom angle indicator, signal horn, boom hoist drum lock, front and rear drum lock, swing lock, swing alarm (buzzer and lamps), boom backstops and load moment indicator. owerworks Carbody The durable carbody features steel welded construction with extendible axles. Crawlers Operator s Cab Crawler assemblies can be hydraulically extended for wide-track operation or retracted for transportation. Crawler belt tension adjusted with hydraulic jack and maintained by shims between idler block and frame. model 000 Totally enclosed, full vision cab fitted with tinted safety glass. A fully adjustable, highbacked seat with arm rests permits operators to set their ideal working position. Side mounted console for auxiliary controls and instruments. An air conditioner, a signal horn, cigarette lighter, windshield wiper and inspection lamp socket are standard features. Controls In front of operator are the foot pedals for front, rear and third drum (option) brakes and foot throttle pedal. At operator s right side are the travel (propel) control levers and the function lock lever. To the operator s right front are the boom hoist control lever, front and rear winch control levers and the free-fall select switches for the front and rear winches and drum turn indicators (front/rear drum). To the operators left front are the swing control lever and third drum (option) control lever. To the operator s left are the crawler extend/retract lever and the positive swing lock. The left-hand console contains switches for the anti-twoblock/boom overhoist. Directly in front of the console are the drum pawl lock for boom, front, rear and third drum (option) and the engine ignition key. The swing parking brake and signal horn are mounted on the swing control lever. Gauges Fuel gauge, engine water temperature gauge, hour meter and tachometer are located on the monitor display. Warning display Crawler drive The independent hydraulic propel drive is built into each crawler side frame. Each drive consists of a hydraulic motor driving a propel sprocket through a planetary gearbox. The hydraulic motor and gearbox are built into the crawler side frame within the shoe width. The track rollers are sealed for maintenancefree operation. Crawler brakes Spring set, hydraulically released, multiple disc-type parking brakes are built into each propel drive. Steering mechanism The hydraulic propel system provides both skid steering (driving one track only) and counter-rotating steering (driving each track in opposite direction) and differential track speed. Crawler shoes 66 shoes per side, 94 mm (36") wide each crawler. Travel speed (igh/ow).4/.0 km/h (0.87/0.6 mph) Attachments Welded lattice construction using tubular, high-tensile steel chords with pin connections between sections. tip is open throat construction. Two idler sheaves and four point sheaves are standard.

5 specifications Basic boom length 5,4 m (50') consists of the boom butt section 7,6 m (5' 0") and boom top section 7,6 m (5' 0"). Optional boom inserts are available to provide extension capabilities. They also have welded lattice construction with tubular, high-tension steel chords and pin connections on each one of 3,0 m (0' ), 6, m (0' ),, m (40') inserts. Maximum total length of boom 70, m (30 ). Fixed Jib The optional fixed jib employs welded lattice construction with tubular, high-tension steel chords with pin connections between sections. Basic jib length 9,4 m (30') consists of Jib butt section 4,57 m (5' ) and jib top section 4,57 m (5'). Optional jib boom inserts of 3,0 m (0'), 6, m (0') are available for extension capabilities up to,3 m (70'). Maximum total length of boom and jib 6,0 m (00') +,3 m (70') is 8,3 m(70' ). uffing Jib Optional Equipment Optional: Blocks and ooks each with roller bearing sheaves grooved for 6.0 mm (.0") diameter wire rope, and roller bearing swivel with hook latch. t ball hook, 456 kg wedge socket for 6 mm wire rope. (5 USt ball hook,,30 lb wedge socket for 6 mm wire rope.) 35 t hook block, 700 kg with one 6 mm Nominal O.D. roller bearing sheave. (40 USt hook block,,88 lb with one 4" Nominal O.D. roller bearing sheaves.) 70 t hook block, 900 kg, three 6 mm Nominal O.D. roller bearing bearing sheave. (90 USt hook block, 4,060 lb, with three 4" Nominal O.D. roller bearing sheaves.) 0 t hook block, 700 kg, with five 6 mm Nominal O.D. roller bearing sheaves. (0 USt hook block, 3,760 lb with five 4" Nominal O.D. roller bearing sheaves.) Optional: Detachable upper boom point with one 575 mm (.6") Nominal outer diameter roller bearing steel sheave grooved for 6mm (.0") rope for liftcrane. 5 Optional: Components to make up 8,3 m (60') basic luffing boom including 7,6 m (5') butt, 9,4 m (30' ) special luffing boom insert (with idler sheave),,5 m (5') top, boom strut assembly, jib strut assembly, jib stop assembly, strut backstops, backstay pendants with sheaves, mounting parts and MI hardware. Optional: 3, m (0'), 6, m (0'), and, m (40') luffing boom inserts. Utilize optional boom inserts to make up to 45,7 m (50') of luffing boom. Optional: 8,3 m (60') basic luffing jib assembly including 5,8 m (9') luffing jib butt, 6, m (0') luffing jib insert, 6,4 m (') luffing jib top, 6,4 m (') front strut assembly, 5,3 m (7' 5") rear strut assembly, and luffing jib point roller assembly (single sheave) which is required during erection of the jib. Maximum 5,8 m (70') jib length for 4,7 m (40') boom length and maximum 30,4 m (00') jib length for 45,7 m (50') boom length. Note: uffing boom utilizes the liftcrane boom inserts (except for the 30' special luffing boom insert). Also, the third drum and wire rope must be ordered with luffing jib attachment. Tools and Accessories A set of tools and accessories are furnished. Travel kit Custom color Working Weight Approximately 900 kg (8,000 lb) including upperworks and lowerworks, full upper counterweights, full carbody counterweights and 5, m (50') basic boom. Ground Pressure Approximately 9.9 kpa (3.5 psi) with basic boom and no load. Gradeability With basic boom: 30%. model 000

6 outline dimensions 6 9' " (6,07 m) R=6' 5" (5,00 m) ' 3" (3,4 m) 3' 7" (,0 m) ' 6" (3,50 m) 4' 3" (7,38 m) 7' 3" (,0 m) Basic 50' (5,4 m) 4' " (,6 m) 9' 0" (5,80 m) ' " (6,77 m) 0' 6" (3, m) model 000 ' 5" (3,50 m) 3' (0,90 m) ' " (,33 m) 3' 6" (4, m) Retracted 7' 5" (5,30 m) Extended

7 outline dimensions Upperworks without Crawlers x ength 5, m 49' 7" Width 3,4 m 0' 8" eight 3,5 m 0' 4" Weight 4 66 kg 94,05 lb 7 Note: Weight includes base machine, gantry, maximum hoist and whip lines on drums, boom butt, full hydraulic fluid reservoir, and one third tank of fuel. rweighounterweight Crawlers x ength 6,77 m ' 3" Width 0,90 m 3' 0" eight,5 m 3' 9" Weight 830 kg 6,085 lb ydraulic Jack (if removed) x 4 ength,36 m 4' 5" Width 0,3 m ' " eight 0,96 m 3' " Weight 430 kg 950 lb Upper Counterweight A x W ength 3,0 m 0' 5" Width 0,58 m ' " eight,94 m 6' 4" Weight kg,050 lb Upper Counterweight B x W ength 3,0 m 0' 5" Width 0,49 m ' 7" eight,9 m 6' 3" Weight kg 5,435 lb Upper Counterweight C x W ength 3,0 m 0' 5" Width 0,69 m ' 3" eight,9 m 6' 3" Weight kg,050 lb Optional 3rd Drum & Wire Rope x Weight 660 kg 5,865 lb Butt 7.6m (5') x ength 7,79 m 6' 3" Width,68 m 5' 6" eight,06 m 6' 9" Weight 0 kg 4,65 lb model 000 Option

8 outline dimensions 8 Top 7.6m (5') x ength 8,3 m 7' 4" Width,68 m 5' 6" eight,69 m 5' 7" Weight 55 kg 3,36 lb Insert 3,0 m (0') x, ength 3,7 m 0' 5" Width,68 m 5' 6" eight,69 m 5' 7" Weight 380 kg 838 lb Insert 6,m (0') x, ength 6, m 0' 5" Width,68 m 5' 6" eight,69 m 5' 7" Weight 655 kg,445 lb Insert, m (40') x,, 3 ength,3 m 40' 5" Width,68 m 5' 6" eight,69 m 5' 7" Weight 95 kg,635 lb Note: Use one A type insert with lug required for any boom combinations that require a, m (40') insert. Fixed Jib Butt x ength 4,8 m 5' 9" Width 0,80 m ' 8" eight 0,80 m ' 8" Weight 00 kg 440 lb Fixed Jib Top x ength 4,9 m 6' " Width 0,80 m ' 8" eight 0,80 m ' 8" Weight 80 kg 67 lb model 000 Fixed Jib Insert 3,0 m (0') x, ength 3, m 0' 3" Width 0,80 m ' 8" eight 0,80 m ' 8" Weight 00 kg 0 lb Fixed Jib Insert 6, m (0') x, ength 6,6 m 0' 3" Width 0,80 m ' 8" eight 0,80 m ' 8" Weight 80 kg 395 lb Fixed Jib Strut x ength m ' " eight 0,6 m ' 0" Weight 50 kg 550 lb Option

9 outline dimensions Special uffing Insert 9, m (30') x ength 9,7 m 30' 5" Width,68 m 5' 6" eight,4 m 7' " Weight 60 kg,558 lb 9 uffing Jib Top x ength 6,9 m ' 8" Width,50 m 4' " eight,48 m 4' 0" Weight 70 kg,580 lb uffing Jib Butt x ength 5,97 m 9' 7" Width,49 m 4' " eight,3 m 4' 4" Weight 863 kg,903 lb uffing Jib Insert 3,0 m (0') x, ength m 0' 5" Width,49 m 4' " eight,9 m 4' 3" Weight 30 kg 684 lb uffing Jib Insert 6,0 m (0') x, ength 6, m 0' 5" Width,49 m 4' " eight,9 m 4' 3" Weight 540 kg,47 lb uffing Special Insert uffing Jib Insert, m (40') x,, 3 ength,3 m 40' 4" Width,49 m 4' " eight,9 m 4' 3" Weight 960 kg,7 lb uffing Jib Point Roller Assembly x ength,0 m 3' 4 Width 0,89 m ' " eight 0,9 m 3' 0" Weight 380 kg 838 lb uffing Top Assembly (Shipping Style) x ength 8,9 m 6' 0" eight,65 m 8' 8" Weight kg 7,895 lb model 000 Option

10 transport data 0 Trailer oad Out Summary Model 000 No. 000 uffing Jib 39,6 m (30') on No , m (5') Weight Quantity on each Item Trailer oad # Item kg (lb) No. 000 Basic Crane with Crawlers Removed 4 66 (94,05) Crawler Frame 83 (6,085) Crawler Frame 83 (6,085) Counterweight A (,050) Counterweight B (5,435) Counterweight B (5,435) Counterweight C (,050), m (40') No. 000 Insert, Pendants 09 (,635), m (40') No. 000 Insert, Pendants 09 (,635), m (40') No. 000 Insert, Pendants 09 (,635) 6, m (0') No. 000 Insert, Pendants 655 (,445) 6, m (0') No. 000 Insert, Pendants 655 (,445) 3,0 m (0') No. 000 Insert, Pendants 380 (838) 3,0 m (0') No. 000 Insert, Pendants 380 (838) Standard Top 7,6 m (5'),55 (3,36) Upper Point 50 (,05) 4,6 m (5 ) No. 000 Fixed Jib Top 80 (67) 4,6 m (5 ) No. 000 Fixed Jib Butt 34 (440) 6, m (0 ) No. 000 Fixed Jib Insert 79 (395) model 000 6, m (0 ) No. 000 Fixed Jib Insert Approximate Total Shipping Weight kg (lb) 79 (395) 4 66 (94,05) (9,558) 3 58 (9,85) (8) (39,768) 56 (7,69)

11 crane assembly model 000

12 performance data model 000

13 load chart notes. Rated loads included in the charts are the maximum allowable freely suspended loads at a given boom length, boom angle and load radius, and have been determined for the machine standing level on firm supporting surface under ideal operating conditions. The user must limit or de-rate rated loads to allow for adverse conditions (such as soft or uneven ground, out-oflevel conditions, wind, side loads, pendulum action, jerking or sudden stopping of loads, inexperience of personnel, multiple machine lifts, and traveling with a load).. Capacities do not exceed 75% of minimum tipping loads. Capacities based on factors other than machine stability such as structural competence are shown by asterisk * in the charts located in the operator s crane cab. 3. The machine must be reeved and set-up as stated in the operation manual and all the instruction manuals. If these manuals are missing, obtain replacements. backstops are required for all boom lengths. Gantry must be in the fully raised position for all operations. Crawlers must be fully extended and be locked in position. The crane must be leveled to within % on a firm supporting surface. 4. Do not attempt to lift where no radius or load is listed as crane may tip or collapse. 5. Attempting to lift more than rated loads may cause machine to tip or collapse. Do not tip machine to determine capacity. 6. Weight of hooks, hook blocks, slings and other lifting devices are a part of the total load. Their total weight must be subtracted from the rated load to obtain the weight that can be lifted. 7. When lifting over boom point with jib or upper boom point installed, rated loads for the boom must be deducted as shown below. Jib length m Upper 9,, 5, 8,3,3 (ft) Point (30) (40) (50) (70) Deduct kg (lbs) (700) (,400) (3,00) (4,00) (5,00) (6 00). An upper boom point cannot be used on a 70, m (30 ft) boom length.. The boom should be erected over the front of the crawlers, not IateraIIy. 3. east stable position is over the side. 4. Maximum hoist load for number of reeving parts of line for hoist rope. Maximum oad for Main No. of Parts of ine Maximum oads kg (Ibs) (5,000) (50,000) (75,000) (00,000) (5,000) No. of Parts of ine Maximum oads m (Ibs) (50,000) (75,000) (00,000) (5,000) (40,000) Maximum oad for uffing Jib No. of Parts of ine 3 4 Maximum oads kg (Ibs) (5,000) (50,000) (75,000) (80,000) Maximum oad for Fixed Jib No. of Parts of ine Maximum oads m (Ibs) (4,000) Maximum oad for Upper Point (On iftcrane ) No. of Parts of ine Maximum oads kg (Ibs) (5,000) (50,000) Maximum oad for Upper Point (On uffing Jib) No. of Parts of ine Maximum oads kg 300 (Ibs) (5,000) 3 When lifting over luffing jib point with luffing jib roller assembly or pin connected boom point sheave (on the luffing boom top) attached, rated loads for the jib and sheave must be deducted as shown below. uffing Jib Point Roller Pin Connected Point Sheave Deduct kg (lbs) 386 (850) 8 (480) 8. The total load that can be lifted by the fixed jib is limited by rated jib loads. The total load that can be lifted with the upper boom point is limited by rated upper boom point loads. 9. lengths for fixed jib mounting are 7,4 m (90 ft) to 6,0 m (00 ft). 0. The total load that can be lifted by the upper boom point is: the rated load for the luffing jib (without upper boom point installed) minus 386 kg (850 lbs); however, the upper boom point rated load should not exceed 300 kg (5,000 lbs). Minimum Weight of ook Block Required for owering. (uffing Jib Use) No. of Parts of ine 3 4 Maximum oads m (Ibs) (600) (,00) (,500) (,800) 5. ifting capacities listed apply only to the machine as originally manufactured for and supplied by Manitowoc Cranes, Inc. Modifications to this machine or use of equipment other than that specified can reduce operating capacity. 6. Designed and rated to comply with ANSI Code B30.5. Operation of this equipment in excess of rated loads or disregard of instruction voids the warranty. model 000

14 boom combinations 4 No. 000 eavy-ift Combinations ength Inserts 3, m (0 ft) 6, m (0 ft), m (40 ft) No. 000 Fixed Jib Combinations Jib ength Fixed Jib Inserts 3,m (0 ft) 6,m (0 ft) 5, (50) 9, (30) 8,3,3 (70), (40) 5, (50) 4,6 m (5 ft) Jib Top 4,4 8,3 7,4 (00),3 (70) 6, m (0 ft) Jib Insert 33,5 (0) (0) 39,6 (30) * * 7,6 m (5 ft) No. 000 Top Model 000 Fixed Jib,3 m (70 ft) 6, m (0 ft) Jib Insert 4,7 (40) 45,7 (50) * * 4,6 m (5 ft) Jib Butt 48,8 * 5,8 (70) 54,9 57,9 * * *, m (40 ft) Insert 7,6 m (5 ft) Top 6,0 (00) 3* 64,0 (0) 67,0 (0) 70, (30) 3* 3* 3*, m (40 ft) Insert, m (40 ft) Insert *Note: One 40 ft. (, m) boom insert with lug (40A) is required for fixed jib. When no jib is installed a 40 ft (, m) boom can be used instead of 40A., m (40 ft) Insert, m (40 ft) Insert Model 000 Main 6,0 m (00 ft) Model 000 Main 70, m (30 ft) 6, m (0 ft) Insert, m (40 ft) Insert model , m (0 ft) Insert 3,0 m (0 ft) Insert 3,0 m (0 ft) Insert 7,6 m (5 ft) Butt Model 000 Main 70, m (30 ft) 000 6, m (0 ft) Insert 3,0 m (0 ft) Insert 7,6 m (5 ft) Butt Model 000 Fixed Jib on Main 8,3 m (70 ft)

15 boom combinations No. 000 uffing Jib Combinations uffing Jib ength 3,0 m (0 ft) Inserts 6, m (0 ft), m (40 ft) 6,4 m ( ft) Jib Top 5 8,3,3 (70) 4,4 7,4, m (40 ft) Insert (00) 33,5 (0) (0) 39,6 (30), m (40 ft) Insert 4,7 (40) 45,7 (50) 48,8 5,8 (70) Model 000 uffing Jib 5,8 m (70 ft) 6, m (0 ft) Jib Insert 6, m (0 ft) Jib Insert 3,0 m (0 ft) Jib Insert No. 000 uffing Combinations uffing ength 3,0 m (0 ft) Inserts 6, m 9, m (0 ft) (30 ft), m (40 ft) 5,79 m (9 ft) Jib Butt, m (5 ft) Jib Top 8,3,3 (70) * *, m (40 ft) Insert 4,3 * 7,4 * (00) * 33,5 (0) (0) 39,6 (30) 4,7 (40) * * * * Model 000 uffing 4,7 m (40 ft), m (40 ft) Insert 45,7 (50) * *Note: One 9,4 m (30') special luffing boom insert is required for luffing boom. 000 Model 000 uffing Jib on uffing 94,5 m (30 ft) 9, m (30 ft) Special uffing Insert 7,6 m (5 ft) Butt model 000

16 heavy-lift boom range diagram 6 No. 000 Main (40) 73, 8 0 (30) 7,0 (0) 67,0 (0) 64,0 (00) 6, ,0 (0) 67, (0) 70, (30) ,9 54,9 (70) 5,8 54,9 57,9 6,0 (00) ,8 5,8 (70) 40 0 EIGT ABOVE GROUND (50) 45,7 (40) 4,7 (30) 39,6 (0) (0) 33,5 (00) (00) 33,5 (0) (0) 39,6 (30) 4,7 (40) 45,7 (50) 48, ,4 7,4 4,4 4,4 (70),3,4 (70) 8,3 8,3 (50) 5, 5,3 (50) (40), (30) 9, model 000 5,00 m (6' 5") TAISWING 000,0 m (3' 7") ROTATION,0 m (7' 3"), (40) 8,3 4,4 (00) (0) 4,7 (40) 48,8 DISTANCE FROM CENTERINE OF ROTATION 54,9 6,0 (00)

17 heavy-lift load charts Model 000 iftcrane Capacities No. 000 Main kg (75,000 lb) Upper Counterweight 360 Rating kg (lb) x , (50) 8,3,3 (70) 4,4 7,4 (00) 33,5 (0) (0) 39,6 (30) 4,7 (40) 45,7 (50) 48,8 5,8 (70) 54,9 57,9 6,0 (00) 64,0 (0) 67, (0) 70, (30) () 4,0 (4) 0,0 (40.0) 99, (06.0) (04.0) 4,5 (6) 5,5 (8) 6,0 (0) 7,0 (4) 8,0 (8) 0,0 (34),0 (40) 4,0 (45) 6,0 (55),0 (75) 8,0 (95) 3,0 (05) 34,0 (5) 38,0 (5) 40,0 (35) 44,0 (45) 46,0 (55) 50,0 (65) 53,3 (75) 88,4 (77.0) 68,0 (50.0) 6,0 (35.0) 5 (.9) 44,5 (89.5) 3,8 (68.3) 5,6 (55.) (47.) 87,6 (77.0) 67,9 (50.0) 6,9 (35.0) 5 (.7) 44,3 (89.) 3, (68.) 5,6 (54.6) 0,5 (46.7) 7,0 (36.) 86, (77.0) 67,9 (50.0) 6,9 (35.0) 5 (.7) 44,3 (89.0) 3, (67.9) 5,3 (54.4) 0,5 (46.5) 7,0 (35.9) 68,0 (50.0) 6,0 (35.0) 5 (.5) 44,3 (88.8) 3, (67.4) 5,3 (54.) 0,5 (46.) 7,0 (35.4) 67,9 (50.0) 6,9 (35.0) 5 (.5) 44,3 (88.8) 3, (67.4) 4,6 (54.0) 0,5 (46.0) 7,0 (35.4),5 (3.5) 6,9 (35.0) 53, (.3) 44, (88.6) 3, (67.) 4,9 (53.7) 0,3 (45.8) 7,0 (35.0),0 (3.) 53,0 (.3) 44, (88.4) 3,0 (67.0) 4,8 (53.5) 0, (45.6) 6,9 (34.8),0 (.9) 7,9 (6.5) 53,3 (.) 44, (88.4) 3,0 (67.0) 4,8 (53.5) 0, (45.6) 6,8 (34.8) 0,9 (.7) 7,8 (6.3) 6,4 (4.) (00.0) 44,0 (88.) 3,9 (66.7) 4,7 (53.3) 0, (45.4) 6,8 (34.6) 0,8 (.4) 7,7 (6.0) 6,3 (3.8) 5,8 (.) 43,9 (87.9) 3,8 (66.5) 4,6 (53.) 0,0 (45.) 6,6 (34.3) 0,6 (.) 7,5 (5.6) 6, (3.4) 5,5 (.6) 4,7 (0.3) (87.7) 3,7 (66.3) 4,4 (5.6) 9,8 (44.7) 6,5 (33.9) 0,5 (.8) 7,4 (5.4) 6,0 (3.) 5,4 (.) 4,5 (9.9) 3,7 (66.3) 4,5 (5.9) 9,9 (44.9) 6,5 (33.9) 0,5 (.8) 7,4 (5.4) 6,0 (3.) 5,4 (.) 4,4 (9.7) 4, (8.5) (66.) 4,3 (5.4) 9,7 (44.5) 6,4 (33.7) 0,4 (.6) 7, (4.9) 5,8 (.7) 5, (.0) 4,3 (9.4) 3,9 (8.) 3, (7.0) 3,5 (65.9) 4, (5.) 9,6 (44.3) 6, (33.) 0, (.) 7,0 (4.7) 5,6 (.3) 5,0 (0.5) 4, (9.0) 3,7 (7.7) 3,0 (6.6),7 (5.7) 30,0 (65.4) 4, (5.0) 9,5 (44.0) 6, (33.0) 0,0 (0.9) 6,9 (4.3) 5,5 (.) 4,9 (0.) 4,0 (8.8) 3,5 (7.),8 (6.),5 (5.),0 (4.4),6 (50.0) 9,5 (44.0) 6, (33.0) 0, (0.9) 6,9 (4.3) 5,5 (.) 5,0 (0.3) 4,0 (8.8) 3,5 (7.),8 (6.),5 (5.0),9 (4.),6 (3.5),6 (50.0) 9,4 (43.8) 6,0 (3.8) 0,0 (0.7) 6,8 (4.) 5,4 (.9) 4,8 (9.9) 3,8 (8.3) 3,4 (6.8),6 (5.7),3 (4.6),7 (3.7),3 (46.7) 9, (43.4) 5,9 (3.6) 9,8 (0.) 6,7 (3.8) 5, (.4) 4,6 (9.7) (7.9) 3, (6.6),4 (5.), (4.4),6 (3.5) 9,5 (4.7) 7,9 (40.) 5,7 (3.) 9,6 (0.0) 6,5 (3.4) 5, (.) 4,5 (9.) 3,4 (7.4) 3,0 (6.), (4.8),9 (3.9) model 000 Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

18 fixed jib range diagram 8 No. 000 Fixed Jib on Main 85,3 (70) 8,3 79, ,3 (70) (50) 76, (40) 73,, (40) 5, (50) 79, 8,3 (70) 60 0 (30) 70, (0) 67, (0) 64,0 9, (30) 67, (0) 70, (30) 73. (40) 67, (50) 50 0 (00) 6,0 64,0 (0) 57,9 6,0 (00) EIGT ABOVE GROUND 54,9 (70) 5,8 48,8 (50) 45,7 (40) 4,7 (30) 39,6 (0) (0) 33,5 (0) 39,6 (30) 4,7 (40) 45,7 (50) 48,8 5,8 (70) 54,9 57, (00) 7,4 4,4 (70),3 8,3 (50) 5, model 000 5,09 m (6' 5") TAISWING (40), (30) 9, 000,0 m (3' 7") ROTATION,0 m (7' 3"), (40) 8,3 4,4 (00) (0) 4,7 (40) 48,8 DISTANCE FROM CENTERINE OF ROTATION 54,9 60, (00)

19 fixed jib load charts Model 000 Series iftcrane Fixed Jib Capacities No. 000 Fixed Jib on Main kg (75,000 lb) Counterweight 360 Rating kg (lb) x Offset 30 Offset 9 7,4 (0) 48,8 54,9 6,0 (00) 7,4 (0) 48,8 54,9 6,0 (00) 0,0 (30) 0,8 (4.0) 0,0 (30),0 (40) 0,8 (4.0) 0,8 (4.0),0 (40) (.0) 4,0 (50) 0.8 (4.0) 0,8 (4.0) 0,8 (4.0) (4.0) (4.0) 4,0 (50) 9,5 (.0) 9,5 (.0) Jib 9, m (30 ft) 8,0 4,0 30,0 (00) 36,0 (0) 4,0 (40) 0.8 (4.0) 0, (.9) 7,4 (6.) 0,8 (4.0) 9,7 (.) 7, (5.3) 5,3 (.6) 0,8 (4.0) 9,3 (0.) 6,6 (4.) 4,8 (0.4) (7.8) 0,8 (4.0) (9.8) 6,3 (3.6) 4,5 (9.8) 3,3 (7.) 0,8 (4.0) 8,8 (9.0) 6, (3.) 4,3 (9.3) 3,0 (6.5) Jib 9, m (30 ft) 8,0 4,0 30,0 (00) 36,0 (0) 4,0 (40) 9,5 (.0) 8,6 (8.9) 9,5 (.0) 9,4 (0.8) 7, (5.6) 9,5 (.0) 9,4 (0.8) 6,8 (4.7) 5,0 (0.7) 9,5 (.0) 9, (0.) 6,5 (4.) 4,7 (0.) 3,4 (7.4) (.0) 9, (9.9) 6,4 (3.7) 4,5 (9.7) 3, (7.0) 48,0,7 (5.8),3 (4.9),0 (4.) 48,0,3 () 5,0 (75), (),7 (3.6),5 () 5,0 (75) 56,0 (85) 56,0 (85) 7,4 (0) 48,8 54,9 6,0 (00) 7,4 (0) 48,8 54,9 6,0 (00) 0,0 (30) () 0,0 (30),0 (40) (0.0) (),0 (40) 4,0 (50) (0.0) (0.0) (0.0) 4,0 (50) Jib 5, m (50 ft) 8,0 4,0 30,0 (00) 36,0 (0) 4,0 (40) 48,0 5,0 (75) 58,0 (85) (0.0) 7,7 (6.8) 6, (3.6) 5, (.5) (0.0) 8,9 (9.5) 7, (5.7) 5,5 (.9) 4,3 (9.3) (0.0) (0.0) 6,8 (4.7) 5,0 (0.8) 3,8 (8.),9 (6.),3 (4.9),8 (4.) (0.0) (0.0) 6,5 (4.) 4,7 (0.) 3,5 (7.5),5 (5.4),9 (4.0) (0.0) 8,9 (9.7) 6,3 (3.6) 4,5 (9.8) 3,3 (7.), (4.7),6 (3.3) Jib 5, m (50 ft) 8,0 4,0 30,0 (00) 36,0 (0) 4,0 (40) 48,0 5,0 (75) 58,0 (85) 5, (.4) 5, (.) 4,4 (9.8) 5, (.4) 5, (.) 4,8 (0.6) 4,3 (9.6) 5, () 5, (.4) 5, (.4) 4,7 (0.4) 4,0 (8.6) 5, (.4) 5, (.4) 4,9 (0.8) 3,7 (8.),7 (5.9) 5, (.4) 5, (.4) 4,9 (0.6) (7.7),5 (5.3),9 (3.8) model 000 Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

20 fixed jib load charts 0 Model 000 Series iftcrane Fixed Jib Capacities No. 000 Fixed Jib on Main kg (75,000 lb) Counterweight 360 Rating kg (lb) x Offset 30 Offset 7,4 (0) 48,8 54,9 6,0 (00) 7,4 (0) 48,8 54,9 6,0 (00),0 (45) 7, (5.7),0 (45) 8,0 6,7 (4.8) 6,8 (5.) 6,9 (5.4) 7,0 (5.6) 7, (5.7) 8,0 (),0 (75) 6,4 (3.9) 6,6 (4.4) 6,7 (4.8) 6,8 (5.0) 6,9 (5.),0 (75) (8.) (8.) Jib,3 m (70 ft) 6,0 3,0 (0) 38,0 (30) 44,0 (45) 50,0 (70) 5,5 (.5) 4,4 (9.4) 3,7 (7.9) 3, (7.) 6,3 (3.3) 5, (0.9) 4,3 (9.) 3,7 (8.) 3, (6.8) 6,5 (4.3) 6,0 (.7) 4,7 (9.7) (7.9),7 (5.6) 6,6 (4.4) 6,0 (.3) 4,4 (9.) 3,3 (7.),4 (4.7) 6,7 (4.6) 5,8 (.9) 4, (8.6) 3, (6.8),0 (4.) Jib,3 m (70 ft) 6,0 3,0 (0) 38,0 (30) 44,0 (45) 50,0 (70) 3,5 (7.6) 3,0 (6.5),7 () (8.) 3,3 (7.0),9 (6.3),6 (5.9) (8.) 3,5 (7.6) 3, (6.9),9 (6.4),6 (5.9) (8.) (7.8) 3, (7.) 3,0 (6.6) 54,0, (4.8) 56,0,0 (4.0) 60,0 (00),6 (3.3) model 000,7 (5.5) (8.) (8.0) 3,3 (7.3) 3,0 (6.8),5 (4.9),8 (3.9) 54,0, (4.5),8 (3.9),6 () 56,0,6 () 60,0 (00) Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

21 luffing jib range diagram No. 000 uffing Jib on uffing (30) 97,5 78 (30) 94,5 70 (300) 9,4 5,8 (70) 60 88,4 48,7 85,3 (70) 8,3 39,6 (30) 4,7 (40) 45,7 (50) 50 79,3 (0) 40 (50) 76, 33,5 (0) (40) 73, (30) 70, 7,4 (00) 30 (0) 67, 4,4 EIGT ABOVE GROUND (0) 64,0 (00) 6,0 57,9 54,9 (70) 5,8 8,3,3 (70) 0 48,8 (50) 45,7 (40) 4,7 (30) 39, ,7 (40) 39,6 (30) (0) (0) (0) 33,5 33,5 (0) (00) (00) 7,4 4,4,3 (70) 7,4 4,4 (70),3 8,3 (50) 5, (40), (30) 9, 5,00 m (6' 5") TAISWING SERIES B 000,0 m (3' 7") ROTATION 8,3,0 m 7' 3" 9, (30), (40) 5, (50) 8,3,3 (70) 4,4 7,4 (00) 33,5 (0) (0) 39,6 (30) DISTANCE FROM CENTERINE ROTATION 4,7 (40) 45,7 (50) 48,8 5,8 (70) 54,9 57,9 model 000

22 luffing jib load charts Model 000 Series iftcrane uffing Jib Capacities No. 000 uffing Jib on uffing kg (75,000 lb) Counterweight 360 Rating kg (lb) x Angle 8, 4,4 (00) (0) 45,7 (50) 8, 4,4 (00) (0) 45,7 (50) 7,9 (6) 36, (80.0) (80.0) 7,9 (6) uffing Jib ength 8,3 m (60 ft) (30) 0,0 (36) 4,0 (45) 8,0 (65) 0,0 4,0 30,0 (00) 36,0 (0) 3,9 (69.3) 8,8 (57.7) 0,4 (46.) 4, (), () 3,9 (69.3) 8,7 (57.7) 0,5 (46.) 4,4 (6.9),3 () 3,9 (69.3) 8,7 (57.7) 0,5 (46.) 4,6 (7.3),5 () 3,9 (69.3) 8,7 (57.7) 0,5 (46.) 4,8 (7.6),8 () 9,5 (4.5) 7,9 (36.4),9 (9.) 9,5 (8.3) 7,9 () uffing Jib ength m (00 ft) (30) 0,0 (36) 4,0 (45) 8,0 (65) 4,0 30,0 (00) 3,0 (0) 36,0 (0) (57.7) 0,5 (46.) 4,7 (8.0) 9,4 (0.3) 6,4 (3.7) 0,5 (46.) 5,0 (8.4) 9,4 (0.3) 6,4 (3.7) 0,5 (46.) 5, (8.9) 9,5 (0.5) 6,4 (3.7) 5,4 () 0,5 (46.) 5,4 (9.) 9,6 (0.7) 6,4 (3.7) 5,5 (),6 (8.4) 9,6 (9.0) 6,6 (4.3) 4,5 (9.7) 3,9 () 44,0 (45) 44,0 (45) 8, 4,4 (00) (0) 8, 4,4 (00) (0) 4,0 (45) 0,7 (46.) 0,7 (46.) 0,7 (46.) 4,0 (45) model 000 uffing Jib ength 39,6 m (30 ft) 6,0 (55),0 (75) 8,0 (95) 34,0 (5) 40,0 (30) 44,0 (50) 50,0 (65) 5,0 (75) 56,0 7,7 (36.8) 0,9 (.7) 7,3 (5.) 5,0 (0.6) 3,4 (8.) 7,9 (37.5),0 (.9) 7,4 (5.4) 5, (0.6) 3,4 (8.) 7,9 (37.5), (3.) 7,4 (5.4) 5, (0.6) 3,4 (8.) 7, (36.4),3 (3.4) 7,5 (5.7) 5, (0.8) 3,4 (8.) uffing Jib ength 5,8 m (70 ft) 6,0 (55),0 (75) 8,0 (95) 34,0 (5) 40,0 (30) 44,0 (50) 50,0 (65) 5,0 (75) 56,0 (30.0) 0,3 (.6) 6,8 (4.) 4,6 (9.7) 3, (7.3),6 (4.9) (.) (30.) 0,4 (.8) 6,9 (4.3) 4,6 (9.7) 3, (7.3),6 (4.0) 0,4 (.0) 6,9 (4.3) 4,7 (9.7) 3, (7.3),6 () 0,6 (.3) 7,0 (4.6) 4,7 (9.7),6 (6.) Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

23 luffing jib load charts Model 000 Series iftcrane uffing Jib Capacities No. 000 uffing Jib on uffing kg (75,000 lb) Counterweight 360 Rating kg (lb) x Angle 3 8, 4,4 (00) (0) 45,7 (50) 8, 4,4 (00) (0) 45,7 (50) 6,0 (55) (35.9) 6,0 (55) uffing Jib ength 8,3 m (60 ft) 0,0 (65),0 (75) 6,0 (85) 8,0 (95) 3,0 (05) 34,0 (5) 38,0 (5) 40,0 (35) 3,0 (9.),5 (4.0),4 (7.6),0 (3.) 8,5 (9.6) 0,4 (.3) 8,4 (8.7) 7,4 () (0.3) 8,0 (7.9) 7, (5.) 6,9 (5.4) 6,6 (3.9) 5,3 (.9) uffing Jib ength m (00 ft) 0,0 (65),0 (75) 6,0 (85) 8,0 (95) 3,0 (05) 34,0 (5) 38,0 (5) 40,0 (35) 8,8 (9.6) 7,9 (6.8) 6,6 (4.6) 5,9 (.8) 8, (7.9) 7,5 (5.9) 6, (3.7) 5,6 (.9) 4,7 () 6,9 (5.0) 5,8 (3.0) 5,3 (.) 4,5 (9.9) (3.0) 5,4 (.) 4,9 (0.4) 4, (9.0) 3,8 (7.9) 4, (9.3) 4, (9.0) 3,5 (7.7) 3, (6.6) 4,0 (40) 4,0 (40),8 (6.) 8, 4,4 (00) (0) 8, 4,4 (00) (0) 8,0 (95) (5.) 8,0 (95) uffing Jib ength 39,6 m (30 ft) 3,0 (05) 34,0 (5) 38,0 (5) 40,0 (35) 44,0 (45) 46,0 (55) 48,0 5,0 (75) 56,0 (85) 6,3 (3.9) 5,7 (.) 4,8 (0.6) 4,4 (9.3) 3,7 (8.) 5,8 (3.0) 5,3 (.) 4,5 (9.9) 4, (8.6) 3,5 (7.7) 3, () (.) 5,0 (0.6) 4, (9.3) 3,8 (7.9) 3, (6.8),8 (6.0),6 () 4, (9.3) 3,7 (8.) 3,4 (7.),8 (6.),5 (5.3),3 (4.9) uffing Jib ength 5,8 m (70 ft) 3,0 (05) 34,0 (5) 38,0 (5) 40,0 (35) 44,0 (45) 46,0 (55) 48,0 5,0 (75) 56,0 (85) (0.) 4,3 (9.5) 3,9 (8.4) 3, (7.),9 (6.),7 (5.7), (4.6),7 () 3,8 (8.4) (7.5),9 (6.4),6 (5.5),4 (5.),8 (4.0),5 (3.3) (6.6),9 (6.6),5 (5.5), (4.6),9 (4.),5 (3.3), (4.9), (4.6),8 (4.0),7 (3.5) model 000 Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

24 luffing jib load charts 4 Model 000 Series iftcrane uffing Jib Capacities No. 000 uffing Jib on uffing kg (75,000 lb) Counterweight 360 Rating kg (lb) x Angle 8, 4,4 (00) (0) 45,7 (50) 8, 4,4 (00) (0),0 (75) (.5),0 (75) uffing Jib ength 8,3 m (60 ft) 4,0 6,0 (85) 8,0 (95) 3,0 (05) 34,0 (5) 38,0 (5) 40,0 (35) 44,0 (45) 9,7 (.) 8,6 (9.4) 7,9 (7.6) 7,4 (5.7) (3.7) 5,5 (.3) 4,7 (0.4) 4,6 (9.7) (6.4),9 (6.4) uffing Jib ength m (00 ft) 4,0 6,0 (85) 8,0 (95) 3,0 (05) 34,0 (5) 38,0 (5) 40,0 (35) 44,0 (45) 6,0 (3.4) 5,5 (.7) 4,7 (0.4) 4,8 (0.6) 4, (9.3) 3,9 (8.) 3,5 (7.9) 3,3 (7.),8 (6.),4 (5.3), (4.9) 46,0 (50) 46,0 (50),0 (4.4) 8, 4,4 (00) 8, 36,0 (0) (9.7) 36,0 (0) model 000 uffing Jib ength 39,6 m (30 ft) 38,0 (5) 40,0 (30) 4,0 (40) 44,0 (50) 48,0 50,0 (70) 5,0 (75) 54,0 58,0 4,4 (9.7) 4,0 (9.0) (7.9) 3,4 (7.),9 () 3, (7.) 3, (6.8),9 (6.0),4 (5.), () (4.6),0 (4.6),9 (4.0),7 (3.3),5 (3.) uffing Jib ength 5,8 m (70 ft) 38,0 (5) 40,0 (30) 4,0 (40) 44,0 (50) 48,0 50,0 (70) 5,0 (75) 54,0 58,0 (5.), (4.9),0 (4.0),7 (3.7),6 (3.3) (.9) Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

25 clamshell : Welded lattice construction using tubular, high-tensile steel chords with pin connections between sections. Basic boom length: 5, m (50 ft) Max. boom length: m (00 ft) imit on clamshell bucket weight: 00 kg (4,600 lbs) 5 Component Chart length ft (m) arrangement 5, (50) Base-Tip 8,3 Base-A-Tip,3 (70) Base-A-A-Tip, Base-B-Tip 4,4 Base-A-B-Tip 7,4 Base-A-A-B-Tip, Base-B-B-Tip, Base-C-Tip (00) Base-A-B-B-Tip, Base-A-C-Tip Center of Rotation oad Base = 7,6 m (5 ft) Insert: A = 3,05 m (0 ft ) B = 6,0 m (0 ft) C =, m (40 ft) Tip = 7, m (5 ft). Figures represent maximum allowable capacity, and assume level ground and ideal working conditions.. Capacities are calculated at 66% of the minimum tipping loads. 3. Capacities are maximum recommended by PCSA Standard #4. Allowances must be made by the user for such unfavorable conditions as a soft or uneven supporting surface, rapid cycle operations, or bucket suction. 4. The combined weight of the bucket and load must not exceed these capacities. 5. length for clamshell operation should not exceed m (00 ft). Clamshell Capacities kg (,050 lb) Counterweight (One Upper Counterweight, Crawlers Extended) 5, (50) 8,3,3 (70) kg (lb) x 000 4,4 7,4 (00) 7,0 () 0,0 (5.0) 8,0 (6) 0,0 (5.0) (30) 0,0 (5.0) 0,0 (5.0) 0,0 (34) 0,0 (5.0) 9,7 (5.0) 9,7 (5.0) 4,0 (45) 5,0 (50) 7,0 (55) 8,0,0 (70) 4,0 5,0 (85) 0,0 (3.) 7,8 (.9) 6,6 (9.8) 5,7 (.5) 7,8 (.7) 6,6 (9.6) 5,7 (7.) 5,0 (5.) 7,8 (.5) 6,6 (9.4) 5,7 (7.0) 5,0 (5.0) 4,4 (.9) 7,8 (.6) 6,6 (9.) 5,7 (6.8) 5,0 (4.8) 4,3 (.7) (9.5) 6,6 (8.5) 5,7 (6.5) 5,0 (4.6) 4, (.5) (9.3) (8.4) model 000 7,0 (7.7)

26 Manitowoc Crane CARE model Crane CARE is Manitowoc s comprehensive service and support program. It includes classroom and on-site training, prompt parts availability, expert field service, technical support and documentation for every one of the more than 7,000 Manitowoc cranes currently in use throughout the world. That s commitment you won t find anywhere else. That s Crane CARE. Service Training Manitowoc specialists work with you in our training center and in the field to make sure you know how to get maximum performance, reliability and life from your cranes. Manitowoc Cranes Technical Training Center provides valuable multi-level training, which is available for all models and attachments, in the following format: Basic Provides technicians with the basic skills required in our evel I and II classes covering hydraulic and electrical theory and schematics, pump, motor, control, and MI operation, and the use of meters and gauges. evel This model-specific class covers theory and offers hands-on training and trouble shooting for all crane systems. evel This model-specific class provides in depth coverage of all crane systems and components, and advanced troubleshooting of simulated faults. (Requires evel.) evel 3/Master Covering all EPIC models and the 400W, this class stresses high level system knowledge and trouble shooting of simulated faults. (Requires evel.) Parts Availability Genuine Manitowoc replacement parts are accessible through your distributor 4 hours a day, 7 days a week, 365 days a year. Service Interval Kits Provides all the parts required by Manitowoc s Preventative Maintenance Checklist. ydraulic Filter Kit Consists of the following: Filter Element - ydraulic in Tank (4) Cummins Model QSZ5-C600 Diesel Service Interval Kits 00 our Kit Consists of the following: Engine Filter Oil () Filter Water () Filter Fuel (),000 our Kit Consists of the following: Engine Filter Air Cleaner - Primary () Filter Oil () Filter Water (4) Filter Fuel () ydraulic Filter Element - ydraulic in Tank (4) Element - ydraulic Tank Breather (),000 our Kit Consists of the following: Engine Filter, Air Cleaner - Primary () Filter, Air Cleaner - Safety () Filter, Oil () Filter, Water () Filter, Fuel () Ether, (Bottle) () Sensor, Coolant evel (0) Belt, Fan () Belt, Alternator (set of two) () Filter, Element () ydraulic Filter Element - No substitutions allowed Filter - ydraulic In-Tank Suction (4) Kit, Engine Coolant Additive (SCA) Test () Kit, Seal (for hydraulic in tank filter) () Seal, Radial (for air cleaner) () ydraulic Test Kit Protect your investment by demanding Genuine Manitowoc Parts Service Kits. The ydraulic Service Kit consist of the following: All hydraulic fittings to access all pressures and flows. ydraulic flow meters and pressure gauges to record hydraulic data. Electrical Break out harnesses to access voltages on all electrical circuits on all machines. Fluke Digital volt ohm meter, as used in all Manitowoc service literature.

27 Manitowoc Crane CARE ydraulic Test Kit with case The above kit plus a custom heavy-duty carrying case. U.S. Standard Tools Kit All standard tools needed to properly maintain and service your crane. (Does not include torque wrench.) Field Service Factory-trained service experts are always ready to help maintain your crane s peak performance. For a worldwide listing of dealer locations, please consult our website at: Available from your Authorized Manitowoc Cranes Distributor, these VS videos are available in NTSC, PA and SECAM formats. Your Capacity Chart Video Respect the imits Video Crane Safety Video Inspection/Repair Video Crane CARE Package Manitowoc has assembled all of the available literature, CD s and videos listed above plus several Manitowoc premiums into one complete Crane CARE Package. 7 Technical Support Manitowoc s dealer network and factory personnel are available 4 hours a day, 7 days a week, 365 days a year to answer your technical questions and more, with the help of computerized programs that simplify crane selection, lift planning, and ground-bearing calculations. For a worldwide listing of dealer locations, please consult our website at: Technical Documentation Manitowoc has the industry s most extensive documentation, and the easiest to understand, available in major languages and formats that include print, disk and videotape. Additional copies available through your Authorized Manitowoc Distributor. Crane Operator s Manual Crane Parts Manual Crane Capacity Manual Crane Vendor Manual Service Manual (EPIC) uffing Jib Operator s/parts Manual Capacity Chart Manual - Attachments CD rom versions of the Operator s and Parts Manuals are shipped with each crane. Also available are the following CDs: Crane CARE Owner CD Ground Bearing Pressure Estimator CD Crane Selection and Planning Software (CompuCRANE ) EPIC Crane ibrary CD consisting of capacity charts, range diagrams, wire rope specifications, travel specifications, crane weights, counterweight arrangements, luffing jib raising procedures, operating range diagrams, drum and lagging charts, boom rigging drawings, jib rigging drawings, outline dimensions and wind condition charts. model 000

28 Regional eadquarters Americas Manitowoc, Wisconsin, USA Tel: Fax: Shady Grove, Pennsylvania, USA Tel: Fax: Europe, Middle East, Africa Ecully, France Tel: Fax: Asia Pacific Shanghai, China Tel: Fax: Singapore Tel: Fax: Regional Offices Americas Brazil Alphaville Tel: Fax: Mexico Monterrey Tel: Fax: Europe, Middle East, Africa Algeria ydra Tel: Fax: Czeck Republic Netvorice Tel: Fax: France Baudemont Tel: Fax: Cergy Tel: Fax: Decines Tel: Fax: Germany angenfeld Tel: Fax: ungary Budapest Tel: Fax: Italy Parabiago Tel: Fax: Netherlands Breda Tel: Fax: Poland Warsaw Tel: Fax: Portugal Alfena Tel: Fax: isbon Tel: Fax: Russia Moscow Tel: Fax: U.A.E. Dubai Tel: Fax: U. K. Middlesex Tel: Fax: Sunderland Tel: Fax: Asia Pacific Australia Melbourne Tel: Fax: Sydney Tel: Fax: China Beijing Tel: Fax: Xi an Tel: Fax: Korea Seoul Tel: Fax: Philippines Makati City Tel: Fax: Factories U.S.A. Manitowoc Shady Grove Brazil Alphaville France Charlieu a Clayette Moulins India Calcutta Puna Italy Niella Tanaro Germany Wilhelmshaven Portugal Fânzeres China Zhangjiagang Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment and price changes without notice. Illustrations shown may include optional equipment and accessories, and may not include all standard equipment MANITOWOC PG-US-E