3300 Series. product guide. contents. features. 3330F: 8.5T (7.7mt) 3-section boom with 25 ft. 2 in. (7.6m) Tip Height

Transcription

1 product guide contents Features 2 Specifications 3 features 4 models 333F: 8.5T (7.7mt) 3section boom with 25 ft. 2 in. (7.6m) Tip Height 333FL: 8.5T (7.7mt) 3section boom with 33 ft. 6 in. (1.2m) Tip Height 3339: 9.T (8.1mt) 3section boom with 38 ft. 2 in. (11.6m) Tip Height 334B: 1.5T (9.5mt) 3section boom with 38 ft. 2 in. (11.6m) Tip Height 6 ft. (1.8m) fixed extension (333F / FL) and 12 ft. (3.6m) offsettable swingaway extension (3339 & 334B) 7 bhp (52.2 kw) GM EFI dual fuel engine or 99 bhp (73.8 kw) Cummins diesel engine 333F Dimensions 5 Range Diagram 6 Load Chart 7 333FL Dimensions 8 Range Diagram 9 Load Chart B Dimensions 11 Range Diagram 12 Load Chart 13 Dimensions 14 Range Diagram 15 Load Chart 16 Industrial Hydraulic Crane *Product may be shown with optional equipment.

2 features 2 Single position oblique style outriggers Narrow width for inside aisle way usage Standard: Cummins QSB 3.3L turbocharged diesel 99 bhp 26 rpm. Standard: Open air cab shell w/overhead safety glass Optional: Closed cab with hinged door, heater, and defroster Standard: 21 ft. (6.4m) main boom on the 333F 3 ft. (9.1m) main boom on the 333FL 32 ft. 1 in. (1.m) main boom on the 3339 & 334B Optional: Manual 4th main boom section adds 1 ft. (3.m) additional main boom length on 333F and 333FL only. Standard: 4wheel coordinated steer Optional: 2wheel, 4wheel, and crab steer (std. on 3339) Standard: 2wheel, 4wheel, and crab steer with self alignment (334B)

3 specifications Superstructure BBoom 333F: 9 ft. 8 in. 21 ft. 2 in. (2.9m 6.5m) three section full power boom. Maximum tip height: 25 ft. 2 in. (7.6m) 333FL: 12 ft. 8 in. 3 ft. 2 in. (3.8m 9.2m) three section full power boom. Maximum tip height: 33 ft. 6 in. (1.2m) 3339 & 334B: 13 ft. 1 in. 32 ft. 1 in. (4.2m 1.m) threesection full power boom. Maximum tip height: 38 ft. 2 in. (11.6m) *Optional Boom 333F & 333FL: Manual 4th main boom fly section B*Boom Extension 333F & 333FL: 6 ft. (1.8m) fixed pin on extension 3339 & 334B: 12 ft. (3.6m) offsettable extension 1218 ft. (3.65.4m) telescopic offsettable extension Boom Nose 333F / FL: Single sheave nonpivoting 3339 & 334B only: Single sheave, 3position (, + 3, + 8 ) pivoting boom nose for minimizing head space requirements. Lowers head height 1.5 in. (.26m) when nose is pivoted fully forward. *Load Moment Indicator (LMI) Digital display of boom angle, boom length, boom radius, capacity, and allows for operator input to set the limits based on load chart. Displays color coded light bar and audible alarm with function cutout if load exceeds entered parameters. Swing Ball bearing swing circle with 36 continuous rotation. Hydraulic driven worm gear and pinion. Maximum speed: 2.5 rpm Hydraulic System 333F & 333FL: (2) gear pumps 3339 & 334B: Variable displacement piston pump and piggyback gear pump. Combined flow: 28.5gpm (17.9Lpm) Maximum system operating pressure: 36 psi 333F & 333FL: Six section valve bank mounted in dash panel with direct mechanical linkage for low effort lever control & 334B: Six section valve bank chassis mounted; operated via dash mounted, pilot pressure hydraulic joysticks. Return line filter with full flow bypass protection and service indicator gallon (89 L) hydraulic reservoir with sight level gauge and steel side plating to guard against side impact damage. 3 Boom Elevation Single double acting hydraulic cylinder with integral holding valve. Elevation: to 6 for the 333F & 333FL to 72 for the 3339 & 334B AntiTwo Block Device Standard antitwo block device, when activated, provides an audible warning to the crane operator and disengages all crane functions whose movement can cause twoblocking. Load Indicator A simple, effective, and easy to use load indicating system used in conjunction with the antitwo block system to assist the operator in efficient operation of the unit within the limits of the load chart. The display panel displays the hook load and warns the operator when a preset load capacity is exceeded. The warning is an audible alarm. In conjunction with the load display panel (receiver), there is a wireless transmitter and load sensing pin attached to the boom head that transmits the hook load to the display panel. *Rated Capacity Limiter (RCL) Similar to the Load Indicator, but stops the telescope out and boom lift down function when a load limit is exceeded. Uses a similar display panel with the addition of displaying boom angle and boom length read outs on the panel. Hoist Specifications 333F / FL: Worm drive with counterbalance valving. Equal speed power up and down & 334B: Piston motor drive w/spring applied/hydraulic released brake. Drum Diameter: 333F / FL: 9.69 in. (.24m) 3339 & 334B: 1.63 in. (.27m) Maximum Single Line Pull: 333F / FL: 1,7lb (4 854kg) 3339 & 334B: 14,lb (6 35 kg) Maximum Single Line Speed: 333F / FL: 88 FPM (26.8m / min) 3339 & 334B: 12FPM (36.6m / min) Maximum Permissible Single Line Pull: 333F / FL : 8,5lb (3 855 kg) (1/2 [12.7mm] Python Ultra XIPS) 3339 & 334B: 1,lb (4 536kg) (9/16 [14.mm] EEIPS) Rope Length : 333F / FL: (3section boom) 97 ft. (29.6m) (4section boom) 13 ft. (39.6m) 3339 & 334B: 12 ft. (36.6m) *Denotes optional equipment

4 specifications 4 Carrier Frame High strength alloy steel constructed with integral outrigger housings; front and rear lifting, towing, and tiedown lugs. 42 ft. 2 carrydeck size with 14, lb (6 35kg) carrying capacity (333F / FL / 3339) and 17, lb (7 711kg) carrying capacity (334B). Deck coated with antiskid treatment. Outriggers 333F, 333FL & 3339: Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. 334B: Hydraulic telescoping beam with oblique type jack provides extended and down and retracted and down lifting capacities. Integral holding valves on both beam and jack. Outrigger Controls 333F, 333FL & 3339: Lever controls located on dash panel which operate the beams in pairs from side to side. 334B: Two switch operation mounted on dash panel. One 3 position rocker switch to select all beams / jacks, left beams / jacks only, or right beams / jacks only. Separate 4 way toggle switch to activate beams out / in and jacks down / up. Level bubble indicator located inside operators compartment. *Independent outrigger controls available as an option. Std. Engine (Tier III) Cummins QSB 3.3L turbocharged diesel 99 bhp 26 rpm. *Optional Engine G.M. 3.L EFI dual fuel (gasoline / L.P.) 7 bhp 26 rpm. Operators Control Station Frame mounted, open air style control station with cab shell. Includes all crane functions, driving controls, and overhead safety glass. Other standard equipment include a durable weather resistant seat with seat belt, hourmeter, sight level bubble, and fire extinguisher. The dash panel includes engine oil pressure gauge, engine water temperature gauge, fuel gauge, transmission low oil and high temperature warning lights, low battery warning light, and brake system low pressure warning light. The LSI (load indicator) receiver is mounted to the top of the dash and provides warning for A2B and exceeded load capacity. *Operators Control Station Enclosed Includes the standard cab shell with the addition of front and rear glass. Hinged full door with sliding glass. Front windshield wiper and heater and defroster is included. Fuel Tank Capacity 18.5 gallon (7 L) all steel construction with steel side plate to guard against side impact. Electrical System One 12V maintenance free battery, Jump start connections 63 amp alternator. Drive 4 x 2 Front axle drive with planetary hubs and limited slip Differential. Steer 333F / FL: 2wheel, 4wheel steer 3339: 2wheel, 4wheel w/crab steer 334B: 2wheel, 4wheel, and crab steer w/ electronic self alignment. Transmission 3333F / FL & 3339: Clark synchromesh 4 speeds forward and reverse with stalk mounted forward/reverse selector. 334B: Clark powershift 4 speeds forward and reverse. Stalk mounted shifter on left side of steering column. Axles Front: Carraro planetary drive/steer with internal multiwetdisc brakes and limited slip differential. Rear: Fabricated nondrive steer with disc brakes Tires 1. x 15 14PR pneumatic Brakes Hydraulic actuated internal wetdisc service brakes acting on all four wheels. A dash mounted toggle switch activates the dry disc parking brake on the transmission output yoke with a dash warning light. Suspension Front: Rigid mounted to frame. Rear: Rigid mounted to frame Lights Recessed mounted, includes head, tail, rear work, stop, and turn signals. Maximum Speed 22 MPH (35.6km/h) Gradeability** 333F / FL & 3339: 57%...no load 31%...12,lb (5 443kg) load 334B: 68%...no load 4%...2,lb (9 72kg) load G.V.W. 333F: 13,4 lb. (6 78 kg) 333FL: 15,18 lb (6 885 kg) 3339: 15,8 lb (7 167 kg) 334B: 16,6 lb (7 53 kg) Miscellaneous Standard Equipment Single sheave, Quick Reeve style hookblock.; 333F/ FL 8.5T (8.mt); 3339: 9T (8.1mt); 334B1.5T (1mt). Backup alarm. *Denotes optional equipment **Theoretical

5 dimensions 333F YB449 Dimensions 6' 7.5" (2.16' m) 7.5" (2.1 m) 5' 11.88" (1.33 m) 3' 7.75" 5' 11.88" (1.1 1 m) (1.33 m) 3' 7.75" 3' 3" (1.1 1 m) (.99 m) 3' 3" (.99 m) 5 4' 2.88" (1.884' m) 2.88" (1.88 m) 1' 11.5" (.61' m) 11.5" (.6 m) 3.12" ( " m) (.8 m) 3' 3.5" (1. m) 3' 3.5" (1. m) 1' 6" (.46 m) 1' 6" (.46 m) 1' " (.3 m) 1' " (.3 m) 3' 4.5" (1. m) 5' 7" 3' 4.5" (1.7 m) (1. m) 5' 7" 5' 8.38" (1.7 m) 5' 8.38" (1.745' m) 8.38" (1.745' m) 8.38" (1.74 m) 5' 11.88" (1.74 m) (1.825' m) 11.88" (1.82 m) 11' 11.75" ( ' m) 11.75" 12' 7" (3.65 m) ( ' m) 7" (3.84 m) 1' " (.3 m) 1' " (.3 m) 3' 2" (.97 m) 7' 1" (2.39 m) 5' 9.7" (1.77 m) 9.5" (On T ires) (.25 m) 5' 3" 1.6 m) 6' 6.25" (1.99 m) 1' 2" (3.1 m) 6' 4" (1.93 m) 9' 2.75" (2.81 m) 3' 6" (1.7 m)

6 range diagram F HEIGHT FROM GROUND IN FEET SECTION 4 SECTION 6' JIB OPERATING RADIUS IN FEET FROM AXIS OF ROTATION THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

7 load chart 333F 3SECTION BOOM OR 4SECTION BOOM WITH 4TH RETRACTED RADIUS (ft) ON OUTRIGGERS (lbs) ON RUBBER (lbs) F/R 36 F/R * 17 * * 157 * * MAIN BOOM JIB 4SECTION BOOM WITH 4TH EXTENDED RADIUS (ft) ON OUTRIGGERS (lbs) ON RUBBER (lbs) F/R 36 F/R MAIN BOOM ANGLE (deg) JIB STRUCTURAL CAPACITIES (lbs.) 3SECTION BOOM OR 4SECTION BOOM WITH 4TH RETRACTED SECTION BOOM WITH 4TH EXTENDED *LIMIT RATINGS TO 11,8 LBS WHEN 3RD SECTION IS EXTENDED ANY AMOUNT. JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART. SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING FRONT MAIN BLOCK HOOK & BALL JIB, STOWED JIB, DEPLOYED SIDE SIDE REDUCTION CHART FROM MAIN BOOM RATINGS 14 lbs 1 lbs lbs 15 lbs RIGGING CHART REAR FROM JIB RATINGS N/A 1 lbs N/A lbs ) The rated loads are the maximum lift capacities as determined by operating radius, boom extension and boom angle. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied. 5) 6) 2) 3) The rated loads shown on outriggers do not exceed 85% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operating radius and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel and proper training must all be taken into account by the operator. The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered as part of the load. See reduction chart. 7) 8) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (1 psi). Loads on rubber may be transported at a maximum speed of 2.5 mph on a smooth hard level surface with boom retracted to the shortest length possible and centered over front. For operating radius not shown, use load rating of next larger radius. The maximum combined total boom and deck load is 12 lbs. The maximum deck load only is 14 bs. Do not induce any external side loads to boom or jib. 1PART 85lbs WIRE ROPE: 1/2 inch diameter Min. breaking strength 2975 lbs. 2PART 17lbs 4) Ratings on outrigggers are for either outriggers fully extended and down or fully retracted and down. Ratings for outriggers fully retracted and down will apply for any intermediate outrigger setting. THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

8 dimensions 8 333FL 3' 2" (.97 m) 7' 1" (2.39 m) 5' 9.7" (1.77 m) 9.5" (On Tires) (.25 m) 5' 3" 1.6 m) 6' 4" (1.93 m) 6' 6.25" (1.99 m) 9' 2.75" (2.81 m) 1' 2" (3.1 m) 3' 6" (1.7")

9 range diagram 333FL HEIGHT FROM GROUND IN FEET SECTION 35 4 SECTION 4 JIB 6' 45 OPERATING RADIUS IN FEET FROM AXIS OF ROTATION THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

10 load chart 333FL 1 OPERATING RADIUS 3SECTION BOOM OR 4SECTION BOOM WITH 4TH RETRACTED ON OUTRIGGERS ON RUBBER FRONT 36 FRONT 36 OPERATING RADIUS 4SECTION BOOM WITH 4TH EXTENDED ON OUTRIGGERS ON RUBBER FRONT 36 FRONT ft 17 lbs 17 lbs 1 lbs 1 lbs 5. ft 6. ft 157 lbs 144 lbs 95 lbs 82 lbs 6. ft 8. ft 124 lbs 18 lbs 8 lbs 56 lbs 8. ft 1. ft 12 lbs 85 lbs 54 lbs 38 lbs 1. ft 12. ft 85 lbs 695 lbs 38 lbs 27 lbs 12. ft 14. ft 71 lbs 58 lbs 275 lbs 195 lbs 14. ft 16. ft 6 lbs 465 lbs 215 lbs 145 lbs 16. ft 18. ft 52 lbs 38 lbs 18 lbs 115 lbs 18. ft 2. ft 445 lbs 315 lbs 15 lbs 95 lbs 2. ft 22. ft 38 lbs 27 lbs 13 lbs 8 lbs 22. ft 24. ft 33 lbs 235 lbs 11 lbs 65 lbs 24. ft 26. ft 29 lbs 25 lbs 95 lbs 55 lbs 26. ft 27. ft 275 lbs 19 lbs 85 lbs 5 lbs 27. ft 28. ft 2525 lbs 1775 lbs 8 lbs 475 lbs 3. ft 2275 lbs 16 lbs 7 lbs 4 lbs 32. ft 225 lbs 1425 lbs 6 lbs 325 lbs 33.5 ft 1875 lbs 13 lbs 525 lbs 275 lbs 36. ft 38. ft 4. ft 42. ft 43. ft JIB STRUCTURAL MAIN BOOM ANGLE (ALSO DO NOT EXCEED CAPACITIES IN ABOVE CHART) MAIN BOOM JIB 28. ft 3. ft 32. ft 33.5 ft 36. ft 38. ft 4. ft 42. ft 43. ft 49 lbs 49 lbs 49 lbs 49 lbs 43 lbs 43 lbs 43 lbs 425 lbs 38 lbs 38 lbs 38 lbs 33 lbs 34 lbs 31 lbs 29 lbs 34 lbs 31 lbs 29 lbs 34 lbs 29 lbs 24 lbs 26 lbs 21 lbs 17 lbs 29 lbs 29 lbs 195 lbs 135 lbs 29 lbs 29 lbs 16 lbs 15 lbs 29 lbs 265 lbs 135 lbs 85 lbs 29 lbs 23 lbs 11 lbs 7 lbs 29 lbs 215 lbs 1 lbs 65 lbs 275 lbs 245 lbs 22 lbs 195 lbs 175 lbs 1625 lbs 1475 lbs 135 lbs 13 lbs 2 lbs 18 lbs 16 lbs 14 lbs 125 lbs 1125 lbs 125 lbs 925 lbs 875 lbs 95 lbs 8 lbs 7 lbs 625 lbs 55 lbs 475 lbs 4 lbs 35 lbs 325 lbs 6 lbs 5 lbs 4 lbs 325 lbs 25 lbs 225 lbs 2 lbs 15 lbs 125 lbs JIB STRUCTURAL MAIN BOOM ANGLE (ALSO DO NOT EXCEED CAPACITIES IN ABOVE CHART) lbs 24 lbs 27 lbs 3 lbs 35 lbs lbs 21 lbs 22 lbs 26 lbs 34 lbs SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING. OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY FRONT MAIN BLOCK HOOK & BALL JIB, STOWED JIB, DEPLOYED 1PART 85lbs SIDE SIDE REDUCTION CHART FROM MAIN BOOM RATINGS 14 lbs 1 lbs lbs 15 lbs RIGGING CHART WIRE ROPE: 1/2 inch diameter Min. breaking strength 2975 lbs. REAR FROM JIB RATINGS N/A 1 lbs N/A lbs 2PART 17lbs 3 1. The rated loads are the maximum lifting capacities as determined by operating radius only. Any combination of boom lengths and angles may be used to obtain operating radius. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied. 2. The rated loads shown on outriggers do not exceed 85% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the machine leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operating radius, and other factors affecting stability. Hazardous surroundings, experience of personnel and proper handling must all be taken into account by the operator. 3. The weights of all load handling devices, such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered as part of the load. See reductrion chart. 4. Ratings on outriggers are with outriggers fully extended. 5. Ratings on rubber depend on tire capacity, condition of tires, and proper inflation pressure (1 psi). Loads on rubber may be transported at a maximum speed of 2.5 mph on a smooth hard level surface with boom retracted to the shortest length possible and centered over front. 6. For operating radius not shown, use load rating of the next larger radius. 7. The maximum combined total boom and deck load is 12, lbs. For deck loads only, the maximum load is 14, lbs with 1: x 15 tires. Tire inflation at at 1 psi. 8. Do not induce external side loads to boom or jib. THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

11 dimensions (3.5 m) Retracted 13 1 & Extended 32 1 (Retracted 4.22 m & Extended 1.1 m) 4 4 (1.32 m) (3.39 m) 2 2 (.51 m) 15.5 (394 m) See Insert 1 6 (.46 m) 1 (.3 m) 1 (.3 m) (1. m) 5 7 (1.7 m) (1.74 m) (1.74 m) (1.74 m) (1.7 m) (3.65 m) (.98 m) 54. (*1.37 m) * boom head position can only be used with a down haul block 7 3 (2.21 m) (1.3 m) (1.77 m) 53. (1.34 m) 43.5 (1.1 m) 3 Dimensions are with boom horizontal and the antitwo block bottomed. 8 Dimensions are with boom horizontal and the antitwo block bottomed. 2.5 (6.35 cm) 1 2 (3.1 m) 5 3 (1.6 m) 6 5 (1.96 m) THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane (1.81 m)

12 12 range diagram HEIGHT FROM GROUND IN FEET OPERATING RADIUS IN FEET FROM AXIS OF ROTATION THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

13 load chart THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

14 dimensions B 11' 7.75" (3.55 m) 11' 7.75" (3.55 m) SEE INSET SEE INSET 1' 6" (.46 m) 1' 6" (.46 m) *54" (1372 mm) o * o boomhead position can only be used with headache ball. 53" (1346 mm) 3 o 43.5" 8 o (115 mm) Dimensions are with the boom horizontal and the antitwo block bottomed. YB4411 Dimensions THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

15 range diagram 334B HEIGHT FROM GROUND IN FEET o 7 o 65 o 13'1" BOOM 23'4" BOOM 32'1" BOOM 44'1" BOOM 5'1" BOOM WITH 12'" JIB WITH 12'" JIB & 6'" STINGER 6 o 55 o 5 o 45 o 4 o 35 o 3 o 25 o 2 o 15 o 1 o o 1 8 o OPERATING RADIUS IN FEET FROM AXIS OF ROTATION THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

16 load chart B 3 MAIN BOOM JIB 15 FRONT MAIN BLOCK HOOK & BALL JIB, STOWED JIB, DEPLOYED RADIUS (ft) BOOM RETRACTED PART 1 lbs EXTENDED 36 o RETRACTED F/R SIDE SIDE REDUCTION CHART FROM MAIN BOOM RATINGS 14 lbs 1 lbs lbs 45 lbs RIGGING CHART ON OUTRIGGERS (lbs) BOOM EXTENDED WIRE ROPE: 9/16 inch diameter Min. breaking strength 3675 lbs. RETRACTED 36 o BOOM RETRACTED JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART. SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING. REAR FROM JIB RATINGS N/A 1 lbs N/A lbs 2PART 21 lbs BOOM EXTENDED 15 3 OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY. 1) 2) 3) ON RUBBER (lbs) F/R ANY BOOM 36 ANY BOOM MAIN BOOM ANGLE (deg) OFFSET The rated loads are the maximum lift capacities as determined by operating radius, boom extension and boom angle. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied. The rated loads shown on outriggers do not exceed 85% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operating radius and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel and proper training must all be taken into account by the operator. The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered as part of the load. See reduction chart. 12 FTJIB JIB STRUCTURAL CAPACITIES (lbs) 15 OFFSET ) 5) 6) 7) 8) 3 OFFSET OFFSET FTJIB 15 OFFSET OFFSET Ratings on outrigggers are for either outriggers fully extended and down or fully retracted and down. Ratings for outriggers fully retracted and down will apply for any intermediate outrigger setting. Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (1 psi). Loads on rubber may be transported at a maximum speed of 2.5 mph on a smooth hard level surface with boom retracted to the shortest length possible and centered over front. For operating radius not shown, use load rating of next larger radius. The maximum combined total boom and deck load is 12 lbs. The maximum deck load only is 14 bs. Do not induce any external side loads to boom or jib. THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

17 notes 17

18 notes 18

19 notes 19

20 Regional Headquarters Americas Manitowoc, Wisconsin, USA Tel: Fax: Shady Grove, Pennsylvania, USA Tel: Fax: Europe, Middle East, Africa Ecully, France Tel: Fax: Asia Pacific Shanghai, China Tel: Fax: Singapore Tel: Fax: Regional Offices Americas Brazil Alphaville Tel: Fax: Mexico Monterrey Tel: Fax: Europe, Middle East, Africa Algeria Hydra Tel: Fax: Czech Republic Netvorice Tel: Fax: France Baudemont Tel: Fax: Cergy Tel: Fax: Decines Tel: Fax: Germany Langenfeld Tel: Fax: Hungary Budapest Tel: Fax: Italy Parabiago Tel: Fax: Netherlands Breda Tel: Fax: Poland Warsaw Tel: Fax: Portugal Alfena Tel: Fax: Lisbon Tel: Fax: Russia Moscow Tel: Fax: U.A.E. Dubai Tel: Fax: U. K. Middlesex Tel: Fax: Sunderland Tel: Fax: Asia Pacific Australia Melbourne Tel: Fax: Sydney Tel: Fax: China Beijing Tel: Fax: Xi an Tel: Fax: Korea Seoul Tel: Fax: Philippines Makati City Tel: Fax: Factories Brazil Alphaville China Zhangjiagang France Charlieu La Clayette Moulins Germany Wilhelmshaven India Calcutta Pune Italy Niella Tanaro Portugal Baltar Fânzeres Slovakia Saris U.S.A. Manitowoc Port Washington Shady Grove Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment and price changes without notice. Illustrations shown may include optional equipment and accessories, and may not include all standard equipment MANITOWOC Printed in USA Form No. Part No. 86 / 28 / 2M