Product Guide. Features. 6 ft 110 ft) four-section, full power sequenced synchronized. nchronized boom. swingaway extension.

Transcription

1 Grove TMS0E Product Guide Features ř t or t ( USt or USt) capacity ř 11 m 33,5 m (36 6 ft 110 ft) four-section, full power sequenced synchronized nchronized boom ř 10,1 m 17 m (33 33 ft 56 ft) offsettable bi-fold lattice swingaway away extension ř Optional 6,1 m (20 ) or 12,2 m ( ft) ension inserts swingaway extension ř Grove MEGAFORM RMTM boom ř Up to 7484 kg (16,0 6,0 lb) hydraulically installed and removed emoved counterweight

2 Features Swingaway extension inserts Optional 6,1 m () or 12,2 m ( ft) swingaway extension inserts offer excellent capacities with an unprece dented tip height of up to 212 ft. Suspension system Standard front and rear air ride suspension provides a comfortable ride at maximum speed of 105 km/h ( mph). MEGAFORM TM boom The 11 m 33,5 m (36 ft 110 ft) four-section full power sequenced synchronized MEGAFORM boom is designed for maximum vertical and lateral strength. Cummins diesel carrier engine Cummins QSM 2 diesel carrier engine delivers the horsepower and torque needed to negotiate tough job sites and achieve highway travel speeds.

3 Contents Specifications 4 Dimensions 7 Travel proposals 8 Working range 9 Main boom and swingaway charts 10 Working range with inserts 18 Swingaway charts with inserts 19 Load handling 21 Symbols glossary 22

4 Specifications Superstructure Cab Boom 11 m 33,5 m (36 ft 110 ft) four (4) section, full power sequenced synchronized boom. Maximum tip height:,9 m (118 ft). Folding lattice extension 10,1 m 17,1 m (33 ft 56 ft) folding lattice swingaway extension offsettable at, 25 or. Stows alongside base boom section. Maximum tip height: 52,6 m (172.5 ft). *Lattice extensions Two (2) 6,1 m () lattice extensions used with the swingaway extension to increase the length to 23,2 m (76 ft) or 29,3 m (96 ft). Maximum tip height: 64,6 m (212 ft). Boom nose Quick reeving type boom nose with 3 nylatron sheaves (TMS7E), (4 for TMS7E [ ton rating]) mounted on heavy duty tapered roller bearings with removable pin-type rope guards. Removable auxiliary boom nose with removable pin type rope guard. Boom elevation One double acting hydraulic cylinder with integral holding valve provides elevation from -3 to 78. Load moment and anti-two block system High visibility, all steel cab with acoustical lining and tinted safety glass throughout. Deluxe seat with armrest mounted hydraulic single axis controls. Dash panel incorporates gauges for all engine functions. Other standard features include: sliding side and rear windows, hot water heat, electric windshield wash/ wipe, circulating air fan, sliding skylight with sunscreen and electric skylight wiper, fire extinguisher, cup holder, air conditioning. Swing Planetary swing with foot applied multi-disc wet brake. Spring applied, hydraulically released parking brake. Two position plunger type and 3 mechanical house locks operated from cab. Maximum speed: 2.0 rpm. Counterweight 49 kg (11,000 lb) consisting of (2) 24 kg ([2] 50 lb) sections. *Optional Heavy Lift package consisting of (1) additional 24 kg (50 lb) section, for a total of 7484 kg (16,0 lb). Hydraulic installation/removal. Hydraulic system Four main gear pumps with a combined capacity of 513 L/m (1.4 gpm). Individual pressure compensated valve banks. Maximum operating pressure: 27,6 Mpa (00 psi). Return line type filter with full flow by-pass protection and service indicator. Replaceable cartridge with beta rating of 5/12/ L (1 gal) reservoir. Remote mounted oil cooler with thermostatically controlled electric motor driven fan. Standard Graphics Display load moment and anti-two block system with audio-visual warning and control lever lockout. These systems provide electronic display of boom angle, boom length, radius, tip height, relative load moment, maximum permissible load, load indication and warning of impending two-block condition. The standard Work Area Definition System allows the operator to pre-select and define safe working areas. If the crane approaches the pre-set limits, audio-visual warnings aid the operator in avoiding job-site obstructions. 4 *Denotes optional equipment

5 Specifications Superstructure, continued Hoist specifications main and auxiliary hoists-model HPA-19G Planetary reduction with integral automatic brake, electronic hoist drum rotation indicator, and hoist drum cable follower. Grooved drum. Single line pull: 1st layer: 8226 kg (18,134 lb) 3rd layer: 6994 kg (15,420 lb) 5th layer: 84 kg (13,413 lb) Maximum single line speed: 162 m/min (531 fpm) Maximum permissible line pull: 7620 kg (16,0 lb) with standard 6 x 37 class rope Rope diameter: 7620 kg (16,0 lb) with optional x 7 class rope 19 mm (. in) Outrigger system Four hydraulic telescoping, single stage, double box beam outriggers with inverted jack and integral holding valves. Quick release type steel outrigger floats 610 mm (24 in) diameter. Three position setting with fully extended, intermediate (%) extended and fully retracted capacities. Maximum outrigger pad load:,8 lb Outrigger controls Located in the superstructure cab and both sides of chassis. Level indicator at each control station. Engine Cummins QSM 2, 10,8 L diesel (Off Highway EPA Certified) six cylinders, after cooled 0 kw (2 bhp) at 10 rpm. Maximum torque 1898 Nm (10 ft lb) at 10 rpm. Fuel requirement Maximum of 00 ppm sulfur content. Equipped with engine compression brake, block heater, cold start aid (less canister) and audio-visual engine distress system. Rope length: Rope type: Maximum rope stowage: Carrier Chassis 152 m (0 ft) 6 x 36 EIPS IWRC special flexible Optional x 7 rotation resistant 256 m (841 ft) Fuel tank capacity 379 L ( gal). Transmission Roadranger 11 speeds forward, 3 reverse. Carrier, continued Drive Drive 8 x 4 x 4. Triple box section, four-axle carrier, fabricated from high strength, low alloy steel with towing and tie-down lugs. Steering Front axles, single circuit, mechanical steering with hydraulic assist. Grove TMS0E *Denotes optional equipment 5

6 Specifications Axles Front: (2) beam-type steering axles, 2,1 m (83.3 in) track. Rear: (2) single reduction drive axles, 1,9 m (.1 in) track. Inter-axle differential lock. Brakes S-cam, dual system operating on all wheels. Spring applied air released parking brake acting on rear axles. Air dryer. Suspension Front: Walking beam with air bags and shock absorbers. Rear: Walking beam with air bags and shock absorbers. Tires Front: 4/R 22.5, tubeless, mounted on aluminum disc wheels. Rear: 315/R 22.5, tubeless, mounted on aluminum disc wheels, steel inner. Lights Full lighting package including turn indicators, head, tail, brake, and hazard warning lights. Cab One man design, all steel fabricated with acoustical lining and tinted safety glass throughout. Deluxe fabric covered, fully adjustable air ride seat. Complete driving controls and engine instrumentation including tilt telescope steering wheel, tachometer, speedometer, voltmeter, water temp., oil pressure, fuel level, air pressure gauge with A/V warning and engine high temp./low oil pressure A/V warning. Other standard items include hot water heater/defroster, electric windshield wash/wipe, fire extinguisher, seat belt, air conditioning, air horn and door lock. Electrical system Two (2) 12V batteries. 12V lighting/starting. Battery disconnect standard equipment. Maximum speed 104 km/h ( mph) % Gradeability (theoretical) Miscellaneous standard equipment Aluminum fenders with rear storage compartments; dual rear view mirrors; electronic back-up alarm; pump disconnect; tire inflation kit; air cleaner restriction indicator; headache ball stowage; chrome package which includes aluminum wheels, and LMI event recorder. *Optional equipment Auxiliary Lighting and Convenience Package includes amber strobe for superstructure and carrier cabs, dual boom base mounted floodlights, and LMI light bar (in cab) Trailing Boom Package includes trailer air and electrical disconnects, no spin differential and trailing boom kit (less dolly) Wind speed indicator Hook blocks Rear pintle hook Cross axle differential locks Winter front radiator cover Aluminum outrigger pads Tow cable LMI calibration for on rubber 6 *Denotes optional equipment

7 Dimensions mm (161.5") TAILSWING mm TURNING (46'-1.00") RADIUS 4262 mm (13' 11.78") MID EXTENDED 2591 mm (8' 6.00") mm ('-6.00") CLEARANCE RADIUS 1891 mm (6' 2.") 96 mm REAR (20' 00") TRACK FULLY 2429 mm (7' 11.62") EXTENDED FULLY RETRACTED 12 mm (4' 3.00") 2079 mm (6' 9.84") FRONT TRACK mm (31' 0") MIN RADIUS 13 7 mm (44' 5.") 4102 mm (13' 5.") 10 9 mm (' 11" ) RETRACTED 33 5 mm(110' 0") EXTENDED C L ROTATION 86 mm (11' 9.18") 34 mm (11' 4") 19 mm (5' 9.25") 1 mm (11.87") 496 mm (1' 7.52") 2106 mm (6' 10.92") 5 mm (1' 9.") mm (2' 1.00") 1524 mm (5'.00") 13 mm (13' 2.00) 2489 mm (8' 2.00") 1524 mm (5' 0.00") 5639 mm (18' 6.00") 533 mm (1' 9") 254 mm (10.00") 99 mm (10' 2.00") mm (36' 6.87") lb lb lb 1 Counterweight configuration Zero 2 3 ϣϧϡř 24 kg (50 lb) 49 kg (11,000 lb) 74 kg (16,0 lb) Grove TMS0E 7

8 Travel proposals Boom over front 5639 mm (18.5') 1524 mm (5') 1524 mm (5') Unit configuration kg (lb) Gross Front Rear Basic machine including 33,5 m (110 ft) main boom, main and auxiliary hoists with cable, driver and no counterweight (74,149) (36,738) 16 9 (37,411) Additions: 24 (50) 4 (-2214) 3499 (7714) 24 kg (50 lb) counterweight pinned on superstructure 49 kg (11,000 lb) counterweight pinned on superstructure 49 (11,000) 2009 (-4428) 6998 (15,428) 74 kg (16,0 lb) counterweight pinned on superstructure 7484 (16,0) 13 (-6642) (23,142) 24 kg (50 lb) counterweight stowed on carrier deck 24 (50) 2128 (4692) 367 (8) 49 kg (11,000 lb) counterweight stowed on carrier deck 49 (11,000) 4257 (9384) 733 (1616) Swingaway carrier brackets 1 (3) 128 (282) 22 (48) 10,1 m (33 ft) swingaway 7 (17) 8 (1972) -110 (-242) 10,1 m 17,1 m (33 ft - 56 ft) swingaway 1125 (24) 11 (22) -10 (-22) Auxiliary boom nose 59 (1) 114 (251) - (-121) t ( USt) hook block stowed at bumper 363 (0) 7 (1229) -1 (-429) t ( USt) hook block stowed at bumper 4 (0) 697 (1536) -243 (-536) t ( USt) hook block stowed at bumper 567 (12) 871 (1920) -4 (-6) 7,5 t (8.3 USt) headache ball stowed in trough 168 (371) 2 (5) -72 (-159) Air conditioning superstructure cab 129 (2) 5 (10) 125 (2) Air conditioning chassis cab (88) 52 (115) -12 (-27) Boom over front 17 6 mm (57.6') 1524 mm (5') 5639 mm (18.5') 1524 mm (5') 3962 mm (13') 1372 mm (4.5') Unit configuration kg (lb) Gross Front Rear Dolly Basic machine including 33,5 m (110 ft) main boom, main and auxiliary hoists with cable, driver, no counterweight and 2722 kg (00 lb) tandem axle dolly (,152) (33,113) (29,041) 8164 (17,998) Additions: 24 (50) 2128 (4692) 367 (8) 0 (0) 24 kg (50 lb) counterweight stowed on carrier deck. 49 kg (11,000 lb) counterweight stowed on carrier deck. 49 (11,000) 4257 (9384) 733 (1616) 0 (0) 10,1 m (33 ft) swingaway with brackets. 934 (20) 107 (236) 91 (201) 936 (1623) 10,1 m 17,1 m (33 ft 56 ft) swingaway with brackets. 12 (2810) 194 (427) 1 (363) 916 (2020) Auxiliary boom nose. 59 (1) -11 (-24) -9 (-20) 79 (174) t ( USt) hook block hanging at boom nose. 363 (0) -57 (-126) -49 (-107) 469 (1033) t ( USt) hook block hanging at boom nose. 4 (0) -71 (-157) -61 (-134) 586 (1291) t ( USt) hook block hanging at boom nose. 567 (12) -89 (-197) -76 (-167) 732 (1614) 7,5 t (8.3 USt) headache ball hanging at boom nose. 168 (371) -26 (-58) -23 (-) 217 (479) 8

9 Working range 36 ft 110 ft main boom and 33 ft 56 ft lattice extension (BOOM DEFLECTION NOT SHOWN) 1 56' EXT ' EXT HEIGHT FROM GROUND IN FEET BOOM LENGTH AND EXTENSION IN FEET Max. Boom Angle AXIS OF ROTATION OPERATING RADIUS IN FEET FROM AXIS OF ROTATION 99.3" 104.1" Dimensions are for largest Grove furnished hook block and headache ball, with anti-two block activated. Grove TMS0E 9

10 TMS7E load charts 36 ft 110 ft 16,0 lb % 3 #0001 Feet ** ,000 84,0 *62,0 12,000 (.5) 84,0 (68.5) 62,0 * 15 87,0 82,0 () 61,000 (74) (76.5) * *31, ,2 (49),000 () 64,0,6 31,000 *29, *24, ,0 (36) 53, 52,000 41,0 34,000,000 27,000 24,000 39,3 38,0 37,8 (57.5) 33,0 29,000 25,0 (.5) 24,200 22,000 29,0 () 28,0 (51.5) 28,0 25,000 22,200 21,7 (69.5) 20,000 23,0 (28) 22, 22,7 (53) 22,000 (59) 20,200 19,000 18,0 17,5 (37) 18,2 (47.5) 18,0 (54.5) 17,0 17,0 17,0 14,0 (26.5) 14,8 (41) 15,0 (49.5) (.5) 12,200 (33.5) 12,9 13,6 14, 14, 10,0 10,8 11,0 12,000 12,200 (24) (38.5) (47) (52.5) (57) (42) 10,2 10,0 76 (22.5) 84 (36.5) () 7210 () () 70 (46.5) 61 (21.5) 64 (34.5) 60 (42.5) (28.5) 50 (38) 47 (20.5) 00 (33) 42 (27.5) (19.5) Minimum boom angle (deg) for indicated length (no load) 0 Maximum boom length (ft) at 0 degree boom angle (no load) 110 NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for instructions. *This capacity is based on maximum boom angle. Lifting capacities at zero degree boom angle Boom angle ** ,0 24,4 (29.8) (34.2) NOTE: ( ) Reference radii in feet. ** ft boom length is with inner-mid extended and outer-mid & fly retracted. 17,0 (44.2) 11,0 (54.6) (64.2) 6610 (74.2) 53 (84.2) 4120 (94.2) 3110 (104.2) A ft 110 ft 16,0 lb % Over rear # Feet ** ,00 84,0 *62,0 12,000 (.5) 84,0 (68.5) 62,0 * 15 87,0 82,0 () 61,000 (74) (76.5) * *31, ,2 (49),000 () 64,0,6 31,000 *29, *24,000 25,6 (36) 53, 52,000 41,0 34,000,000 27,000 24,000 44, 39,0 38,000 (57.5) 33,0 29,000 25,0 (.5) 24,200 22,000 32,0 () 29,7 (51.5) 28,0 25,000 22,200 21,7 (69.5) 20,000 26,0 (28) 25,0 23,0 (53) 22,000 (59) 20,200 19,000 18,0 20,000 (37) 19,0 (47.5) 18,0 (54.5) 17,0 17,0 17,0 17,8 (26.5) 16,0 (41) 16,0 (49.5) (.5) 14,0 (33.5) 14,6 14, 14, 14, 13,0 (24) 12,0 (38.5) 12,200 (47) 12,200 (52.5) 12,200 (57) 11,4 10,0 (42) 10,0 10,0 10, (22.5) 94 (36.5) () 82 () 70 () 70 (46.5) 71 (21.5) 60 (34.5) 60 (42.5) 50 (28.5) 50 (38) 00 (20.5) 00 (33) 44 (27.5) 38 (19.5) Minimum boom angle (deg) for indicated length (no load) 0 Maximum boom length (ft) at 0 degree boom angle (no load) 110 NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for instructions. *This capacity is based on maximum boom angle. Lifting capacities at zero degree boom angle Boom angle ** ,0 24,4 (29.8) (34.2) NOTE: ( ) Reference radii in feet. ** ft boom length is with inner-mid extended and outer-mid & fly retracted. 17,0 (44.2) 11,9 (54.6) 96 (64.2) 7810 (74.2) 63 (84.2) 47 (94.2) 33 (104.2) A

11 Load charts 36 ft 110 ft 33 ft 56 ft 16,0 lb % Pounds 3 33 ft length 56 ft length #0021 #0022 #0023 #0041 #0042 #0043 Feet ,0 12,0 *83 12,0 (74) *10, ,0 10,4 * , () 10,000 (74.5) (74.5) 11, (73) *50 10, (66) (.5) (.5) 71 5 *38 84 (61.5) 73 (.5) (67.5) 5 (73) (59) (.5) (.5) (.5) 6110 (62.5) 5810 (73) (54) (61.5) (67.5) (.5) (57) (.5) (68.5) (52.5) (54) (57) (.5) (49.5) () (61) (64) (42.5) (46.5) (47.5) (52.5) (58.5) (62) (39.5) (43) (.5) (56) (36) (39.5) (48) (32) () (.5) (27.5) (.5) (42.5) (.5) (22) (39.5) (.5) (36.5) (42.5) (33) (38.5) (29.5) (34.5) No load stability data Min. boom angle for indicated length Max. boom length at boom angle ft ft NOTE: ( ) Boom angles are in degrees. A *This capacity is based upon maximum boom angle. #LMI operating code. Refer to LMI manual for instructions. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension ft and 56 ft boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. Grove TMS0E 11

12 TMS7E load charts 36 ft 110 ft 11,000 lb % 3 #0101 Feet ** ,000 84,0 *62,0 12,000 (.5) 84,0 (68.5) 62,0 * 15 87,0 82,0 () 61,000 (74) (76.5) * *31, ,2 (49),000 () 64,0,6 31,000 *29, *24, ,5 (36) 48,3 47,6 41,0 34,000,000 27,000 24,000 34,0 33,6 32,0 (57.5) 33,0 29,000 25,0 (.5) 24,200 22,000 25,2 () 24,3 (51.5) 25,000 25,000 22,200 21,7 (69.5) 20,000 19,0 (28) 18,0 19,3 (53) 20,0 (59) 20,200 19,000 18,0 14,6 (37) 15,3 (47.5) 16,0 (54.5) 16,7 17,0 17,0 11,5 (26.5) 12,3 (41) 13,0 (49.5) 13,7 (.5) 14,0 14,8 99 (33.5) 10,0 11,4 11,0 12, ,000 10,0 (24) (38.5) (47) (52.5) (57) 72 (42) (22.5) 67 (36.5) () 56 () 20 () 63 (46.5) 4710 (21.5) (34.5) 53 (42.5) 4200 (28.5) 10 (38) 34 (20.5) 37 (33) (27.5) 24 (19.5) Minimum boom angle (deg) for indicated length (no load) 0 Maximum boom length (ft) at 0 degree boom angle (no load) 110 NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for instructions. *This capacity is based on maximum boom angle. Lifting capacities at zero degree boom angle Boom angle ** ,0 24,4 (29.8) (34.2) NOTE: ( ) Reference radii in feet. ** ft boom length is with inner-mid extended and outer-mid & fly retracted. (44.2) 93 (54.6) 6710 (64.2) (74.2) 20 (84.2) 2920 (94.2) 20 (104.2) A ft 110 ft 11,000 lb % Over rear # Feet ** ,000 84,0 *62,0 12,000 (.5) 84,0 (68.5) 62,0 * 15 87,0 82,0 () 61,000 (74) (76.5) * *31, ,2 (49),000 () 64,0,6 31,000 *29, *24, ,0 (36) 52,0 52,000 41,0 34,000,000 27,000 24,000 41,7 39,0 38,000 (57.5) 33,0 29,000 25,0 (.5) 24,200 22,000 32,0 () 29,7 (51.5) 28,0 25,000 22,200 21,7 (69.5) 20,000 26,0 (28) 25,0 23,0 (53) 22,000 (59) 20,200 19,000 18,0 20,000 (37) 19,0 (47.5) 18,0 (54.5) 17,0 17,0 17,0 16,6 (26.5) 16,0 (41) 16,0 (49.5) (.5) 14,0 (33.5) 14,6 14, 14, 14, 12, (24) 12,0 (38.5) 12,200 (47) 12,200 (52.5) 12,200 (57) 10,9 10,0 (42) 10,0 10,0 92 (22.5) 94 (36.5) () 82 () 70 () 70 (46.5) 71 (21.5) 60 (34.5) 60 (42.5) 50 (28.5) 50 (38) 00 (20.5) 00 (33) 44 (27.5) (19.5) Minimum boom angle (deg) for indicated length (no load) 0 Maximum boom length (ft) at 0 degree boom angle (no load) 110 NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for instructions. *This capacity is based on maximum boom angle. Lifting capacities at zero degree boom angle Boom angle ** ,0 24,4 (29.8) (34.2) NOTE: ( ) Reference radii in feet. ** ft boom length is with inner-mid extended and outer-mid & fly retracted. 17,0 (44.2) 11,9 (54.6) 96 (64.2) 7810 (74.2) 63 (84.2) 47 (94.2) 33 (104.2) A

13 Load charts 36 ft 110 ft 33 ft 56 ft 11,000 lb % Pounds 3 33 ft length 56 ft length #0121 #0122 #0123 #0141 #0142 #0143 Feet ,0 12,0 *83 12,0 (74) *10, ,0 10,4 * , () 10,000 (74.5) (74.5) 11, (73) *50 10, (66) (.5) (.5) 71 5 *38 79 (61.5) 73 (.5) (67.5) 5 (73) (59) 63 (.5) 60 (.5) (.5) 6110 (62.5) 5810 (73) 5120 (54) (61.5) 44 (67.5) (.5) 54 (57) (.5) 3410 (68.5) (52.5) 46 (54) 4310 (57) (.5) 3710 (49.5) () 38 (61) 32 (64) (42.5) (46.5) (47.5) (52.5) (58.5) (62) (39.5) 26 (43) 27 (.5) 3410 (56) (36) 21 (39.5) 23 (48) (32) 17 () 19 (.5) (27.5) 13 (.5) 15 (42.5) (.5) 1 12 (39.5) 17 (.5) 1 13 (42.5) 1 10 (38.5) No load stability data Min. boom angle for indicated length Max. boom length at boom angle ft ft NOTE: ( ) Boom angles are in degrees. A *This capacity is based upon maximum boom angle. #LMI operating code. Refer to LMI manual for instructions. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension ft and 56 ft boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. Grove TMS0E 13

14 TMS7E load charts 36 ft 110 ft 50 lb % 3 #0201 Feet ** ,0 84,0 *62,0 12,000 (.5) 84,0 (68.5) 62,0 * 15 87,0 82,0 () 61,000 (74) (76.5) * *31, ,000 (49),000 () 64,0,6 31,000 *29, *24, , (36) 41,000,0,1 34,000,000 27,000 24,000 28,0 28,1 27,7 (57.5) 28,4 29,000 25,0 (.5) 24,200 22,000 20,0 () 20,0 (51.5) 21,000 21,7 22,200 21,7 (69.5) 20,000 15,0 (28) 15,3 16,0 (53) 16,7 (59) 17,0 17,0 18,0 11,7 (37) 12,0 (47.5) 13,200 (54.5) 13,9 14,0 14,0 (26.5) 98 (41) 10,5 (49.5) 11,2 (.5) 11,6 12, (33.5) (24) (38.5) (47) (52.5) (57) (42) (22.5) 20 (36.5) () () 4420 () 47 (46.5) 31 (21.5) (34.5) 39 (42.5) 28 (28.5) 3200 (38) 21 (20.5) 25 (33) 19 (27.5) 14 (19.5) Minimum boom angle (deg) for indicated length (no load) 0 Maximum boom length (ft) at 0 degree boom angle (no load) 110 NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for instructions. *This capacity is based on maximum boom angle. Lifting capacities at zero degree boom angle Boom angle ** ,8 21,0 (29.8) (34.2) NOTE: ( ) Reference radii in feet. ** ft boom length is with inner-mid extended and outer-mid & fly retracted. 12,0 (44.2) (54.6) 48 (64.2) 3410 (74.2) 25 (84.2) 1710 (94.2) 10 (104.2) A ft 110 ft 50 lb % Over rear # Feet ** ,000 84,0 *62,0 12,000 (.5) 84,0 (68.5) 62,0 * 15 87,0 82,0 () 61,000 (74) (76.5) * *31, ,000 (49),000 () 64,0,6 31,000 *29, *24,000 25,0 (36) 49,8 49,0 41,0 34,000,000 27,000 24,000 38, 38,200 38,000 (57.5) 33,0 29,000 25,0 (.5) 24,200 22,000 28,0 () 28,0 (51.5) 28,0 25,000 22,200 21,7 (69.5) 20,000 22,200 (28) 22,200 23,000 (53) 22,000 (59) 20,200 19,000 18,0 17,0 (37) 18,0 (47.5) 18,0 (54.5) 17,0 17,0 17,0 14, (26.5) 14,9 (41) 15,7 (49.5) (.5) 12,2 (33.5) 13,0 13,0 14, 14, 10,0 (24) 10,0 (38.5) 11,6 (47) 12,000 (52.5) 12,200 (57) 9 98 (42) 10,200 10,5 (22.5) 83 (36.5) () 7 () 74 () 70 (46.5) 59 (21.5) 63 (34.5) 60 (42.5) 5410 (28.5) 57 (38) (20.5) 4920 (33) 41 (27.5) 20 (19.5) Minimum boom angle (deg) for indicated length (no load) 0 Maximum boom length (ft) at 0 degree boom angle (no load) 110 NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for instructions. *This capacity is based on maximum boom angle. Lifting capacities at zero degree boom angle Boom angle ** ,0 24,4 (29.8) (34.2) NOTE: ( ) Reference radii in feet. ** ft boom length is with inner-mid extended and outer-mid & fly retracted. 17,0 (44.2) 11,0 (54.6) (64.2) 20 (74.2) 51 (84.2) 39 (94.2) 20 (104.2) A

15 Load charts 36 ft 110 ft 33 ft 56 ft 50 lb % Feet 105 Pounds 33 ft length 56 ft length 3 #0221 #0222 #0223 #0241 #0242 # ,0 12,0 *83 12,0 *10,8 83 (74) 12,0 10,4 * , 10, () (74.5) (74.5) 10, *50 (73) (66) (.5) *38 (.5) (61.5) (.5) (67.5) (73) (59) (.5) (.5) (.5) (62.5) (73) (54) (61.5) (67.5) (.5) (57) (.5) (68.5) (52.5) (54) (57) (.5) (49.5) () (61) (64) (42.5) (46.5) (47.5) (52.5) (58.5) (62) (39.5) (43) (.5) (39.5) (48) (.5) 125 Min. boom angle for indicated length Max. boom length at boom angle No load stability data 2520 (56) (.5) ft ft NOTE: ( ) Boom angles are in degrees. A *This capacity is based upon maximum boom angle. #LMI operating code. Refer to LMI manual for instructions. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension ft and 56 ft boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. Grove TMS0E 15

16 TMS7E load charts 36 ft 110 ft 0 lb % 3 #01 Feet ** ,0 84,0 *62,0 12,000 (.5) 84,0 (68.5) 62,0 * 15 87,0 82,0 () 61,000 (74) (76.5) * *31, ,000 (49),7 (),0,6 31,000 *29, *24, ,3 (36) 34,0 33,8 33,0 34, 34,000,000 27,000 24,000 23,3 23, 22,0 (57.5) 23,0 24,1 24,8 (.5) 24,200 22,000 16,6 () 16,2 (51.5) 16,9 17,0 18,0 18,8 (69.5) 19,0 12,2 (28) 12,000 12,6 (53) 13,0 (59) 14, 14,5 14,9 88 (37) 9620 (47.5) 10,0 (54.5) 11,0 11,4 11,0 10 (26.5) 73 (41) (49.5) 87 (.5) (33.5) (24) (38.5) (47) (52.5) (57) 43 (42) 25 (22.5) 33 (36.5) 3710 () 24 () 28 () 3220 (46.5) 17 (21.5) 21 (34.5) 20 (42.5) 14 (28.5) 18 (38) 12 (33) Minimum boom angle (deg) for indicated length (no load) Maximum boom length (ft) at 0 degree boom angle (no load) NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for instructions. *This capacity is based on maximum boom angle. Lifting capacities at zero degree boom angle Boom angle ** 23,0 17,6 (29.8) (34.2) NOTE: ( ) Reference radii in feet. ** ft boom length is with inner-mid extended and outer-mid & fly retracted. (44.2) 4810 (54.6) 29 (64.2) 18 (74.2) 1210 (84.2) A ft 110 ft 0 lb % Over rear #01 16 Feet ** ,000 84,0 *62,0 12,000 (.5) 84,0 (68.5) 62,0 * 15 87,0 82,0 () 61,000 (74) (76.5) * *31, ,0 (49) 62,200 () 61,0,6 31,000 *29, *24, ,2 (36) 47,0 46,0 41,0 34,000,000 27,000 24,000 32,9 33, 33,0 (57.5) 33,0 29,000 25,0 (.5) 24,200 22,000 24,0 () 24,0 (51.5) 25,3 25,000 22,200 21,7 (69.5) 20,000 18,0 (28) 18,7 19,0 (53) 20,4 (59) 20,200 19,000 18,0 14,6 (37) 15,0 (47.5) 16,0 (54.5) 17, 17,0 17,0 11,5 (26.5) 12,0 (41) 13,200 (49.5) 14,000 (.5) 14,3 14,7 99 (33.5) 10,0 11,5 11,0 12,0 20 (24) 88 (38.5) 9620 (47) 99 (52.5) 10,0 (57) 72 (42) (22.5) 66 (36.5) 73 () 20 () 5910 () 62 (46.5) (21.5) 4910 (34.5) 52 (42.5) (28.5) 4410 (38) 30 (20.5) 36 (33) 29 (27.5) 23 (19.5) Minimum boom angle (deg) for indicated length (no load) 0 Maximum boom length (ft) at 0 degree boom angle (no load) 110 NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for instructions. *This capacity is based on maximum boom angle. Lifting capacities at zero degree boom angle Boom angle ** ,0 24,4 (29.8) (34.2) NOTE: ( ) Reference radii in feet. ** ft boom length is with inner-mid extended and outer-mid & fly retracted. 15,2 (44.2) 9320 (54.6) 66 (64.2) 49 (74.2) 3820 (84.2) 27 (94.2) 19 (104.2) A

17 Load charts 36 ft 110 ft 33 ft 56 ft 0 lb % Pounds 3 Feet ft length 56 ft length #0821 #0822 #0823 #0841 #0842 # ,0 12,0 *83 12,0 *10,8 83 (74) 12,0 10,4 * ,3 10, () (74.5) (74.5) *50 (73) (66) (.5) *38 (.5) (61.5) (.5) (67.5) (73) (59) (.5) (.5) (.5) (62.5) (73) (54) (61.5) (67.5) (.5) (57) (.5) (68.5) (52.5) (54) (57) (49.5) () (61) (64) 1020 (46.5) 12 (47.5) 10 (52.5) 18 (58.5) 14 (56) (62) No load stability data Min. boom angle for indicated length Max. boom length at boom angle ft ft NOTE: ( ) Boom angles are in degrees. A *This capacity is based upon maximum boom angle. #LMI operating code. Refer to LMI manual for instructions. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension ft and 56 ft boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. Grove TMS0E 17

18 Working range 36 ft 110 ft main boom and 33 ft 56 ft lattice extension with ft insert (BOOM DEFLECTION NOT SHOWN) ' EXT ' EXT HEIGHT FROM GROUND IN FEET BOOM LENGTH AND EXTENSION IN FEET Max. Boom Angle OPERATING RADIUS IN FEET FROM AXIS OF ROTATION AXIS OF ROTATION 99.3" 104.1" Dimensions are for largest Grove furnished hook block and headache ball, with anti-two block activated. 18

19 Load charts 36 ft 110 ft 33 ft 56 ft 16,0 lb % Pounds 3 33 ft length 56 ft length #0064 #00 #0066 #0084 #00 #0086 Feet *93 93 *60 84 * (74) (.5) 63 () 59 (74) 54 (76.5) 59 *48 58 (68.5) (74.5) (.5) (.5) 44 (76.5) 49 (64.5) 47 (68.5) 44 (.5) (68.5) * (62.5) (66) (73) (64) 38 (66) 3820 () (71.5) (62) (69.5) 29 (73) 37 (56) 36 (61.5) 3220 (61.5) (67.5) (57.5) 30 (59) (66) () (64) (52.5) 29 (54) 25 (56) 24 (62) 23 () (46) 28 () (54) (43.5) 27 (47) 21 (52) 21 (57.5) 20 (.5) (.5) 20 (44) 2000 (49.5) 19 (.5) (37.5) 2 (41) 18 (47.5) 18 (53) 1810 (.5) (34.5) (37.5) (53) (.5) 13 (33.5) 14 (42.5) (.5) 1 13 (43) No load stability data Min. boom angle at 110 ft boom length Max. boom length at 0 o ft ft boom angle NOTE: ( ) Boom angles are in degrees. A *This capacity is based upon maximum boom angle. #LMI operating code. Refer to LMI manual for instructions. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension ft and 56 ft boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. Grove TMS0E 19

20 Load charts 36 ft 110 ft 33 ft 56 ft ft 16,0 lb % 3 Pounds 33 ft Length 56 ft Length #0064 #00 #0066 #0084 #00 #0086 Feet (74.5) * (73) (76.5) (74.5) *3710 (69.5) (73) (.5) (73) 36 (67.5) (71.5) (71.5) (66) (69.5) () (64) () (68.5) (74.5) 27 (62.5) (66) (.5) 28 (64) 28 (66) 20 () (74.5) (58.5) (62) (64) (69.5) (62) (62) (54.5) (66) (52.5) (56) (58.5) (64.5) (.5) (54) (.5) (57) (62.5) () (48) (51.5) (53) (61) (46) 1510 (49.5) 1520 (.5) 10 (59) 11 (61.5) (43.5) (47) (48) (41) 1 10 (41.5) No load stability data Min. boom angle at 110 ft boom length o Max. boom length at 0 o boom angle ft ft NOTE: ( ) Boom angles are in degrees. A *This capacity is based upon maximum boom angle. #LMI operating code. Refer to LMI manual for instructions. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension ft and 56 ft boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 20

21 Load handling Weight reductions for load handling devices 33 ft-56 ft folding boom extension *33 ft extension (erected) 43 lb *56 ft extension (erected) 94 lb Folding ext. with insert *33 ft extension (erected) 9410 lb *56 ft extension (erected) 16,010 lb Folding ext. with ft insert *33 ft extension (erected) 16,2 lb *56 ft extension (erected) 24,3 lb *Reduction of main boom capacities (no deduct required for stowed boom extension) When lifting over swingaway and/or jib combinations, deduct total weight of all load handling devices reeved over main boom nose directly from swingaway or jib capacity. Line pulls and reeving information Permissible Nominal Hoists Cable/Specs. Line pulls Cable length 19 mm (3/4 in) 6x37 Class, Main EIPS, IWRC Special Flexible 16,0 lb 0 ft Min. Breaking Strength 58,0 lb. 19 mm (. in) Class x7 Main & Aux Rotation resistant (non-rotating) 16,0 lb 0 ft Min breaking strength,0 lb The approximate weight of 3/4 in wire rope is 1.5 lb/ft Auxiliary boom nose 137 lb Hoist performance Hook blocks and headache balls: Ust, 5 sheave 1125 lb + Ust, 3 sheave 10 lb + Ust, 3 sheave 7 lb Ust Headache ball (non-swivel) 3 lb Ust Headache ball (swivel) 3 lb + + Refer to rating plate for actual weight. NOTE: All load handling devices and boom attachments are considered part of the load and suitable allowances MUST BE MADE for their combined weights. Weights are for Grove furnished equipment. Wire Hoist line pulls Drum rope Rope Two speed hoist Capacity (ft) Layer Low High Available lb* Available lb* Layer Total 1 18, , , , , , *Max. lifting capacity: 6x37 or x7 class = 16,0 lb Working area diagram Bold lines determine the limiting position of any load for operation within working areas indicated. Grove TMS0E 21

22 Symbols glossary Axles Counterweight Grade Outriggers Boom Drive Heavy duty jib Radius Boom elevation Electrical system Hoist Rotation Boom extension Engine H Hookblock Speed Boom length Extension Hydraulic system Steering Boom nose Frame Lights Suspension Brakes Fuel tank capacity Oil Swing Cab Gear Outrigger controls Tires Transmission 22

23 Notes Grove TMS0E 23

24 Regional headquarters Manitowoc - Americas Manitowoc, Wisconsin, USA Tel: Fax: Shady Grove, Pennsylvania, USA Tel: Fax: Regional offices Manitowoc - Europe, Middle East, Africa Ecully, France Tel: +33 (0) Fax: +33 (0) Manitowoc - Asia Pacific Shanghai, China Tel: Fax: Americas Brazil Alphaville Mexico Monterrey Chile Santiago Europe, Middle East, Africa Czech Republic Netvorice France Baudemont Cergy Decines Germany Langenfeld Hungary Budapest Italy Lainate Netherlands Breda Poland Warsaw Portugal Baltar Russia Moscow U.A.E. Dubai U.K. Buckingham Asia - Pacific Australia Brisbane Melbourne Sydney China Beijing Chengdu Guangzhou India Delhi Hyderabad Pune Korea Seoul Philippines Makati City Singapore Factories Brazil Alphaville China TaiAn Zhangjiagang France Charlieu La Clayette Moulins Germany Wilhelmshaven India Pune Italy Niella Tanaro Portugal Baltar Fânzeres Slovakia Saris USA Manitowoc Port Washington Shady Grove This document is non-contractual. Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment, and price changes without notice. Illustrations shown may include optional equipment and accessories and may not include all standard equipment Manitowoc Printed in USA Form No. TMS0E Part No M