TRUCK MOUNTED HYDRAULIC CRANE

Transcription

1 TRUCK MOUNTED HYDRAULIC CRANE

2 Dimensions STEERING RADIUS 34' 10" (10617mm) C L ROTATION 12' 0" TAILSWING (3657 mm) 8' 4.0" (25 mm) 6' 10.69" (2100 mm) FRONT TRACK 6' 0.3" (1837 mm) REAR TRACK 7' 10" (23 mm) RETRACTED 14' (4267 mm) MID EXTEND 20' (96 mm) FULL EXTEND 36' 11.1" (11254 mm) 11' 4.3" (3462 mm) 11' 2.5" (3418 mm) 7' 4.4" (458 mm) 1' 6.02" (458 mm) 6.69" (1mm) 17 1' 8.89" 10' 10.2" (331 mm) (37 mm) 1' 9.00" (533 mm) 1' 5.19" 1' 1.18" (437 mm) (335 mm) C L FRONT AXLE 11' 11.2" (3639 mm) 2' 3.0" (686 mm) 8' 9.0" (2667 mm) 17' 8.0" (5385 mm) 34' 7.5" (10553 mm) C L REAR TANDEM 19 2' 3.0" (686 mm) 8' 0.0" (2438 mm) 2 GROVE TMS0E

3 Working Range Diagram ft ft. 8,790 lbs. 100% 36 ( m) ( m) (3 987 kg) (BOOM DEFLECTION NOT SHOWN) 3 45' EXT. 1 26' EXT. HEIGHT FROM GROUND IN FEET BOOM LENGTH AND EXTENSION IN FEET MAX BOOM ANGLE OPERATING RADIUS IN FEET FROM AXIS OF ROTATION AXIS OF ROTATION 8' - 2" 7' - 8" DIMENSIONS ARE FOR LARGEST GROVE FURNISHED HOOK BLOCK AND HEADACHE BALL, WITH ANTI-TWO BLOCK ACTIVATED. THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional 3 GROVE TMS0E

4 Superstructure Specifications Boom 29 ft ft. (8.8 m - 29 m) four-section, full power boom. Maximum tip height: ft. (31.2 m) Telescopic Swingaway Extension 26 ft ft. (7.92 m m) telescoping offsettable swingaway extension. Offsettable at and 3. Stows alongside base boom section. Maximum tip height: 146 ft. (44.5 m) Boom Nose Four nylatron sheaves mounted on heavy duty tapered roller bearings with removable pin-type rope guards. Quick reeve type boom nose. *Optional removable/stowable auxiliary boom nose with removable pin type rope guard. Boom Elevation One double-acting hydraulic cylinder with integral holding valve provides elevation from -3 to +76. Load Moment & Anti-Two Block System Standard Graphic Display load moment and anti-two block system with audio-visual warning and control lever lockout. These systems provide electronic display of boom angle, length, radius, tip height, counterweight, relative load moment, maximum permissible load, load indication and warning of impending two-block condition. The standard Work Area Definition System allows the operator to pre-select and define safe working areas. If the crane approaches the pre-set limits, audio-visual warnings aid the operator in avoiding job-site obstructions. Cab Full vision, all steel fabricated with acoustical lining and tinted safety glass throughout. Deluxe seat incorporates armrest mounted hydraulic single-axis controllers. Dash panel incorporates gauges for all engine functions. Other standard features include: hot water heater, cab circulating air fan, sliding side and rear windows, sliding skylight with electric wiper, electric windshield wash/wipe, fire extinguisher, 12v power outlet, and seat belt. Swing Planetary swing with foot applied multi-disc brake. Spring applied, hydraulically released swing brake and plungertype, one position, mechanical house lock operated from cab. 36 mechanical swing lock. Maximum speed: 3.0RPM Counterweight Standard 2,6 lbs. (1 193 kg), consisting of 3 lbs. (1 kg) on front bumper and 20 lbs. (1 043kg) on superstructure. Optional: 8,790 lbs. (3 987 kg) heavy counterweight package. Hydraulic System Two main gear pumps with a combined capacity off GPM (483 L/min). Maximum operating pressure: PSI (26.2 MPa). Two individual valve banks. Return line type filter with full flow by-pass protection and service indicator. Replaceable cartridge with micron filtration rating of 2/20/ gallon (363 L) reservoir. Oil cooler on carrier. System pressure test ports. HOIST SPECIFICATIONS Main and Auxiliary Hoist Model HP15B-17G Planetary reduction with automatic spring applied multidisc brake. Grooved drum. Electronic hoist drum rotation indicator and hoist drum cable followers. Maximum Single Line Speed: 429 FPM (136 m/min) Maximum Permissible Line Pull: w/standard 6 x 37 class rope: 11,190 lbs. (76 kg) w/optional 18 x 19 class rope: 9,0 lbs. (4119 kg) Rope Diameter: 5/8 in. (16 mm) Rope Length: 4 ft. (137 m) Rope Type: 6 x 37 class EIPS IWRC *Optional 18 x 19 class rotation resistant Maximum Rope Stowage: 7 ft. (228 m) *Denotes optional equipment 4 GROVE TMS0E

5 Carrier Specifications Chassis Box section frame fabricated from high-strength, alloy steel. Integral outrigger housings and front/rear towing and tie down lugs. Outrigger System Hydraulic single-stage, double box beam outriggers with front stabilizer and inverted jack design; equipped with integral holding valves. Three positions with fully extended, intermediate (%) extended and fully retracted settings. Steel fabricated, outrigger pads, 24 in. (610 mm) round. A permanently stowed, front center stabilizer pad, aluminum. Optional aluminum outrigger pads available in place of steel. Maximum outrigger pad load: 72,000 lbs. ( kg) Outrigger Controls Located in the superstructure cab on the left side (umbilical design), requires two hand operation. Crane level indicator (sight bubble) on right side console. Carrier mounted controls located on each side of the carrier for initial setup. Engine Caterpillar 3126B HUEI, six cylinder, turbocharged and after cooled diesel, 442 cu. in. (7.25 L) 0 bhp (224 kw) 2,200 RPM. Maximum torque: 8 ft. lbs. (1166 1,0 RPM Fuel Tank Capacity gallons (227 L) Electrical System Two 12 V low maintenance batteries. 12 V system with 12 V headlights. Battery disconnect in battery box compartment. Drive 6 x 4 x 2 Steering Front axles, mechanical with hydraulic power assist controlled by steering wheel. Transmission Allison automatic 6 speeds forward and 1 reverse. Axles Front: (1) Rockwell, beam type steering axle, 82.7 in. (2.10 m) track. Capacity: 21,000 lbs. (9526 kg) Rear: (2) Rockwell single reduction drive, 72.3 in. (1.84 m) track. Inter-axle differential lock. Capacity: 41,000 lbs. ( kg) Brakes S-cam, dual line air system operating on all wheels. Spring-applied, air released parking brake acting on rear axles. Air dryer standard. Tires Standard Front: 425/65R22.5 radial highway tread tubeless singles. Standard Rear: 11R22.5 highway tread tube type duals. Suspension Front: Spring mounted single axle with shock absorbers. Rear: Air bag suspension standard equipment. Lights Full carrier lighting package including front and rear turn indicators, headlights and LED tail lights, brake and hazard warning lights. Cab One man design, galvannealed steel fabricated with accoustical lining and tinted safety glass throughout. Deluxe fabric covered, fully air adjustable seat with armrests. Complete driving controls and engine instrumentation including tilt telescope steering wheel, tachometer, speedometer, voltmeter, water temp., oil pressure, fuel level, dual air pressure gauges with A/V warning, engine high temp./low coolant A/V warning. Other standard items include: hot water heater/defroster, electric variable speed windshield washer and wiper, fire extinguisher, cab circulating fan, seat belt, door and window locks, and a 12V power outlet for cell phone or fax machine. Maximum Speed 65 MPH (105 kph) Gradeability (Theoretical) 36% (Based on 52,000 lbs. [ kg] GVW) Gross Vehicle Weight Basic unit 51,047 lbs. ( kg) Miscellaneous Standard Equipment Full length aluminum fenders, rear view mirrors, electronic back-up alarm, sling/tool box, electric controlled pump disconnect, auxiliary air supply, battery disconnect, air cleaner restriction indicator, block and ball stowage, chrome muffler stack, aluminum front/rear wheels (outer rear only). GROVE TMS0E 5

6 Radius in Feet RATED LIFTING CAPACITIES IN POUNDS WITH HEAVY COUNTERWEIGHT 29 FT FT. BOOM ON OUTRIGGERS FULLY EXTENDED - 36 #0001 Main Boom Length in Feet ,000 (63),8 (61) 55,0 46,0 32,7 (),100 (69.5),100 45,0 31,900 (52.5) 24,000 (42.5) 18,0 (29) 46,9 (74.5) 44,9 (72) 41,0 (68) 34,100 25,0 20,0 (47) 15,5 (38) 12,0 (26) 38,8 (75.5) 36,000 (72.5) 29,0 (67) 24,0 20,0 15,8 (49.5) 13,0 (42.5) 10,900 8,990 (23.5) 29,4 (75) 27,0 23,100 19,0 16,000 (57) 13,200 (51.5) 10,900 (46) 9,020 (39.5) 7,5 (32) 6,3 (22) *22,4 22,4 19,2 () 16,8 (66) 14,8 13,2 (57.5) 10,900 (53) 9,0 7,5 (43) 6,3 (37) 5,410 () 4,5 (20.5) *18,5 16,0 (72.5) 14,0 (69) 12,0 (65.5) 11,000 9,6 (58) 8,7 7,6 () 6,4 (45.5) 5,490 (.5) 4,6 (35) 3,9 (28.5) 3,3 (19.5) *15,0 15,0 (74) 13,200 (.5) 11,0 (67.5) 10,000 9,0 (.5) 7,990 (57) 7,100 (53) 6,320 (49) 5,5 (44.5) 4,0 () 4,000 3,0 (28) 85 2,8 (19.5) Minimum boom angle ( ) for indicated length (no load) 0 Maximum boom length (ft.) at boom angle (no load) 9 5 NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based on maximum boom angle. Lifting Capacities at Zero Degree Boom Angle Boom Main Boom Length in Feet Angle ,1 (22.8) 15,8 (33.8) NOTE: ( ) Reference radii in feet 11,000 (43.8) 7,790 (53.8) 5,5 (63.8) 4,0 (73.8) 2,9 (83.8) 2,4 (89) A A 6 GROVE TMS0E

7 26 FT FT. TELE. BOOM EXTENSION WITH HEAVY COUNTERWEIGHT ON OUTRIGGERS FULLY EXTENDED - 36 Radius in Feet Min. boom angle for indicated length (no load) 26 ft. LENGTH 45 ft. LENGTH #0021 #0023 #0041 #0043 * 8,120 (68.5) 7,3 (66) 6,3 (63.5) 5,6 (.5) 4,820 (57.5) 4,200 3,6 (51.5) 3,0 (48.5) 2,520 2,0 (41) 1,6 (37) 1,3 (32.5) 1,020 (27) 3 *5,7 5,7 5,3 4,7 (68) 4,290 (65) 3,8 3,5 (59) 3,2 3,000 (52.5) 2,7 (49) 2,0 2,0 (.5) 1,6 (35.5) *5,2 5,2 (75) 4,9 (73) 4,5 4,1 (68.5) 3,890 3,7 3,0 3,4 (59) 3,2 (56.5) 3,0 (54) 2,820 (51) 2,520 2,1 1,8 (42) 1,5 (38.5) 1,2 3 *2,7 2,7 (74.5) 2,7 (72) 2,5 (69.5) 2,520 (67) 2,4 2,420 2,390 (58.5) 2,3 (55.5) 2,310 (52) 2,000 (48.5) 1,5 1,2 (.5) 1,000 (35.5) Max. boom length at boom angle (no load) 90 ft. ft. NOTE: ( ) Boom angles are in degrees. A #LMI operating code. Refer to LMI manual for instructions. *This capacity based on maximum boom angle. 1. All capacities above the bold line are based on structural strength of boom extension ft. and 56 ft. boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6.Capacities listed are with outriggers properly extended and vertical jacks set only. GROVE TMS0E 7

8 Radius in Feet RATED LIFTING CAPACITIES IN POUNDS WITH STANDARD COUNTERWEIGHT 29 FT FT. BOOM ON OUTRIGGERS FULLY EXTENDED - 36 #0101 Main Boom Length in Feet ,000 (63),8 (61) 53,0,7 28,0 (),100 (69.5),100 41,6 29,200 (52.5) 21,900 (42.5) 17,000 (29) 46,9 (74.5) 44,9 (72) 41,0 (68) 29,6 22,0 17,1 (47) 12,9 (38) 10,1 (26) 38,8 (75.5) 36,000 (72.5) 29,0 (67) 22,5 17,3 13,0 (49.5) 10,200 (42.5) 6,6 (23.5) 29,4 (75) 27,0 22,7 17,0 13,1 (57) 10,0 (51.5) 8,2 (46) 6,690 (39.5) 5,490 (32) 4,0 (22) *22,4 22,4 19,2 () 16,8 (66) 13,2 10,3 (57.5) 8,2 (53) 6,710 5,490 (43) 4,520 (37) 3,720 () 3,0 (20.5) *18,5 16,0 (72.5) 14,0 (69) 12,0 (65.5) 10,0 8,310 (58) 6,7 5,5 () 4,5 (45.5) 3,7 (.5) 3,090 (35) 2,5 (28.5) 2,020 (19.5) *15,0 15,0 (74) 13,200 (.5) 11,0 (67.5) 10,000 8,3 (.5) 6,7 (57) 5,5 (53) 4,5 (49) 3,7 (44.5) 3,110 () 2,5 2,0 (28) 85 1,6 (19.5) Minimum boom angle ( ) for indicated length (no load) 0 Maximum boom length (ft.) at boom angle (no load) 95 NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based on maximum boom angle. Lifting Capacities at Zero Degree Boom Angle Boom Main Boom Length in Feet Angle ,0 (22.8) 13,0 (33.8) 8,520 (43.8) 5,6 (53.8) 3,8 (63.8) 2,5 (73.8) 1,6 (83.8) 1,320 (89) NOTE: ( ) Reference radii in feet. A A 8 GROVE TMS0E

9 26 FT FT. TELE. BOOM EXTENSION WITH STANDARD COUNTERWEIGHT ON OUTRIGGERS FULLY EXTENDED - 36 Radius in Feet ft. LENGTH 45 ft. LENGTH #0121 #0123 #0141 #0143 * 8,120 (68.5) 6,9 (66) 5,6 (63.5) 4,6 (.5) 3,7 (57.5) 3,0 2,4 (51.5) 1,9 (48.5) 1,510 1,120 (41) 3 *5,7 5,7 5,3 4,7 (68) 4,290 (65) 3,8 3,5 (59) 2,9 2,3 (52.5) 1,810 (49) 1,3 *5,2 5,2 (75) 4,9 (73) 4,5 4,1 (68.5) 3,890 3,7 3,0 3,210 (59) 2,6 (56.5) 2,220 (54) 1,820 (51) 1,4 1,1 3 *2,7 2,7 (74.5) 2,7 (72) 2,5 (69.5) 2,520 (67) 2,4 2,420 2,390 (58.5) 1,9 (55.5) 1,5 (52) 105 1,210 (48.5) Min. boom angle for indicated length (no load) Max. boom length at boom angle (no load) ft. ft. NOTE: ( ) Boom angles are in degrees. A #LMI operating code. Refer to LMI manual for instructions. *This capacity based on maximum boom angle. 1. All capacities above the bold line are based on structural strength of boom extension ft. and 56 ft. boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6.Capacities listed are with outriggers properly extended and vertical jacks set only. GROVE TMS0E 9

10 Radius in Feet RATED LIFTING CAPACITIES IN POUNDS WITH LIGHT COUNTERWEIGHT 29 FT FT. BOOM ON OUTRIGGERS FULLY EXTENDED - 36 #0201 Main Boom Length in Feet ,4 (63),8 (61) 51,2 39,000 27,000 (),100 (69.5),100,000 27,900 (52.5) 20,900 (42.5) 15,1 (29) 46,9 (74.5) 44,9 (72),3 (68) 28,0 21,0 15,200 (47) 11,0 (38) 9,010 (26) 38,8 (75.5) 36,000 (72.5) 28,0 (67) 21,5 15,2 11,4 (49.5) 8,9 (42.5) 7,1 5,0 (23.5) 29,4 (75) 27,0 22,0 15,5 11,6 (57) 9,0 (51.5) 7,2 (46) 5,8 (39.5) 4,7 (32) 3,8 (22) *22,4 22,4 19,2 () 15,8 (66) 11,8 9,190 (57.5) 7,2 (53) 5,8 4,7 (43) 3,8 (37) 3,110 () 2,4 (20.5) *18,5 16,0 (72.5) 14,0 (69) 11,8 (65.5) 9,210 7,0 (58) 5,8 4,7 () 3,8 (45.5) 3,1 (.5) 2,5 (35) 2,010 (28.5) 1,5 (19.5) *15,0 15,0 (74) 13,200 (.5) 11,0 (67.5) 9,220 7,320 (.5) 5,8 (57) 4,7 (53) 3,8 (49) 3,1 (44.5) 2,5 () 2,0 1,590 (28) 85 1,190 (19.5) Minimum boom angle ( ) for indicated length (no load) 0 Maximum boom length (ft.) at boom angle (no load) 9 5 NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based on maximum boom angle. Lifting Capacities at Zero Degree Boom Angle Boom Main Boom Length in Feet Angle ,6 (22.8) 12,100 (33.8) 7,5 (43.8) 4,9 (53.8) 3,2 (63.8) 2,0 (73.8) 1,2 (83.8) NOTE: ( ) Reference radii in feet. A A 10 GROVE TMS0E

11 26 FT FT. TELE. BOOM EXTENSION WITH LIGHT COUNTERWEIGHT ON OUTRIGGERS FULLY EXTENDED - 36 Radius in Feet ft. LENGTH 45 ft. LENGTH #0221 #0223 #0241 #0243 * 7,6 (68.5) 6,110 (66) 4,910 (63.5) 3,9 (.5) 3,1 (57.5) 2,0 1,9 (51.5) 1,4 (48.5) 1,0 3 *5,7 5,7 5,3 4,7 (68) 4,290 (65) 3,8 3,0 (59) 2,0 1,8 (52.5) 1,3 (49) *5,2 5,2 (75) 4,9 (73) 4,5 4,1 (68.5) 3,890 3,7 3,2 2,6 (59) 2,190 (56.5) 1,7 (54) 1,0 (51) 1,0 3 *2,7 2,7 (74.5) 2,7 (72) 2,5 (69.5) 2,520 (67) 2,4 2,420 2,000 (58.5) 1,5 (55.5) 100 1,200 (52) Min. boom angle for indicated length (no load) Max. boom length at boom angle (no load) ft. ft. NOTE: ( ) Boom angles are in degrees. A #LMI operating code. Refer to LMI manual for instructions. *This capacity based on maximum boom angle. 1. All capacities above the bold line are based on structural strength of boom extension ft. and 56 ft. boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6.Capacities listed are with outriggers properly extended and vertical jacks set only. GROVE TMS0E 11

12 Counterweight Configurations Heavy: Superstructure 00 lb lb. Front Bumper with Aux. Hoist or in place of (IPO). Standard: Superstructure 20 lb. + 3 lb. Front Bumper Shell with Aux. Hoist or in place of (IPO). Light: Superstructure Shell 12 lb. + No Front Bumper without Aux. Hoist or in place of (IPO). GVW Front Rear lbs kg lbs kg lbs kg Axle/Tire Allowable Weights 62,000 28,123 21,000 9,526 41,000 18,598 TMS0E Basic Machine with main hoist w/,848 23,065 17,9 8,033 33,139 15,032 rope, ft. tele swingaway, standard counterweight 2,6 lbs. (1 193 kg) ADD: Heavy counterweight package 6,1 2, ,312 2,863 ADD: 25 Ton, 3 sheave, hookblock (front stowage) ADD: 7.5 Ton, headache ball (front stowage) ADD: Aux Hoist w/rope 1, ,631 7 ADD: Aux boom nose ADD: 200 lb. driver ADD: A/C carrier ADD: A/C superstructure SUB: 1/2 tank of fuel Remove: ft. tele swingaway only -1, , Remove total counterweight: which includes total front bumper shell and superstructure counterweight inserts from basic machine for weight reduction. -1, ,9-639 Note: Weights may vary due to manufacturing tolerances. 12 GROVE TMS0E

13 Grove Worldwide - World Headquarters Western Hemisphere, Asia/Pacific 1565 Buchanan Trail East P.O. Box 21 Shady Grove, Pennsylvania , USA Tel: [Int + 1] (717) Fax: [Int + 1] (717) Grove Europe Limited* Europe, Africa, Middle East (Sales & Marketing) 1 Emperor Way Doxford International Business Park Sunderland SR3 3XR, England Tel: [Int + 44] (191) Fax: [Int + 44] (191) Deutsche Grove GmbH Germany (Sales & Service) Helmholtzstrasse 12, Postfach 26 D-7 Langenfeld, Germany Tel: [Int + 49] (2173) Fax: [Int + 49] (2173) Deutsche Grove GmbH Wilhelmshaven Works Industriegelande West, Postfach 1853 D Wilhelmshaven, Germany Tel: [Int + 49] (4421) Fax: [Int + 49] (4421) Grove France SAS France (Sales & Service) 16, Chaussèe Jules-Cèsar, OSNY B.P. 203, Cergy Pontoise France Tel: [Int + 33] (1) Fax: [Int + 33] (1) Grove Asia/Pacific - Representative Office Asia/Pacific, Near East 171 Chin Swee Road #10-09 San Centre Singapore Tel: [Int + 65] Fax: [Int + 65] Grove China - Representative Office Room 713, Towercrest Plaza No. 3 Mai Zi Dian West Road Chao Yang District Beijing, China Tel: [Int + 86] (10) Fax: [Int + 86] (10) Grove Middle East P.O. Box 290 Dubai, United Arab Emirates Tel: [Int + 971] (4) Fax: [Int + 971] (4) Lifetime Customer Support Western Hemisphere, Asia/Pacific 1086 Wayne Avenue Chambersburg, Pennsylvania USA Tel: [Int + 1] (717) Fax: [Int + 1] (717) Europe, Africa, Middle East Grove Europe Limited* 1 Emperor Way Doxford International Business Park Sunderland SR3 3XR, England Tel: [Int + 44] (191) Parts Fax: [Int + 44] (191) Service Fax: [Int + 44] (191) *Grove Europe Limited, Registered in England, Number Distributed By: Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment, and price changes without notice. Illustrations shown may include optional equipment and accessories and may not include all standard equipment. GROVE and GROVE LOGO are registered trademarks of GROVE in the U.S. and/or other countries. Copyright 2000 GROVE. All rights reserved. Form No.: TMS0E Part No.: M Printed in U.S.A.