24,000 lb. ( kg) counterweight with hydraulic removal system. Cummins ISM 450, six cylinder after cooled 450 hp (336 kw)
|
|
- Collin Wilfred Green
- 5 years ago
- Views:
Transcription
1 product guide features ft. ( m) 4 section full power Mega Form boom ft. (10-17 m) manual offset bi-fold swingaway 2 x 20 ft. intermediate lattice inserts 24,000 lb. ( kg) counterweight with hydraulic removal system Cummins ISM 4, six cylinder after cooled 4 hp (336 kw) Front and rear air ride suspension contents Features 2 Specifications 3 Dimensions 5 Travel Proposal 6 Working Range 7 Main Boom and Swingaway Charts 9 Swingaway Charts w/one or two 20' inserts 23 Load Handling 30 Truck Mounted Hydraulic Crane
2 features 2 For improved up and over reach, a bifold lattice extension is available on the and manually offsets from 0 to. Standard front & rear air ride suspension provides comfortable ride at max speed of mph ( Km/h) Electronically controlled Cummins ISM4 diesel engine provides plenty of power, on highway and at the jobsite. The Grove MEGAFORM boom shape eliminates weight and increases capacity compared to conventional shapes.
3 specifications Superstructure Boom 41 ft ft. (12.5 m - 39 m) four section, full power MegaForm boom. Maximum Tip Height: 135 ft. (41.1 m). Boom Nose Four nylatron sheaves, mounted on heavy duty tapered roller bearings with removable pin type rope guards. Quick reeve boom nose. Removable auxiliary boom nose with removable pin type rope guard. Boom Elevation Single lift cylinder with safety valve provides boom angle from -3 to +78. Offsettable Lattice Extension ft. (10-17 m) bifold lattice swingaway extension, manual offsettable at 0, 20 and. Maximum tip height: 191 ft. (58.2 m) *Lattice Jib Extensions Two 20 ft. (6.1 m) inserts for use with lattice swingaway extension to increase length up to 76 ft. (23.2 m) or 96 ft. (29.3 m). Maximum tip height: 230 ft. (.1 m) Load Moment & Anti-Two Block System Standard Graphics Display load moment and anti-two block system with audio-visual warning and control lever lockout. These systems provide electronic display of boom angle, boom length, radius, tip height, relative load moment, maximum permissible load, load indication and warning of impending twoblock condition. The standard Work Area Definition System allows the operator to pre-select and define safe working areas. If the crane approaches the pre-set limits, audio-visual warnings aid the operator in avoiding job-site obstructions. Cab All aluminum constructed cab with acoustical lining, hydraulically tiltable (0 to +20 ). Includes tinted safety glass, adjustable operator s seat, sliding windows in side and rear, hinged skylight with wiper, skylight sunscreen. Other features include hot water heater/defroster, armrest integrated dual axis crane controls, and ergonomically arranged instrumentation. Swing Axial piston fixed displacement motor and planetary gear box. Infinitely variable to 1.7 rpm. Holding brake and service brake. Counterweight 8,000 lbs. (3 629 kg) consisting of various sections with hydraulic installation/removal system. *Optional Heavy Lift package consisting of (1) 4,000 lb. (1 814 kg) and (1) 6,000 lb. (2 722 kg) section, for a total of 18,000 lb. (8 1 kg). *Optional XL counterweight package consisting of (1) 6,000 lb. (2721 kg) slab, (1) 00 lb. (1814 kg) slab and (2) 3,000 lb. (1361 kg) wing weights in addition to standard; for a total of 24,000 lb. (10886 kg) of counterweight. Hydraulic System 1 piston and 3 gear type pumps with a total capacity of 179 gpm (678 l/m). Maximum operating pressure, 00 psi (27.6 MPa). Thermostatically controlled oil cooler keeps oil at optimum operating temperature. Tank capacity: 183 gal. (693 l) Hoist Main and auxiliary hoist are powered by axial piston motor with planetary gear and brake. Thumb-thumper hoist drum rotation indicator alerts operator of hoist movement. Single Line Pull: Maximum Line Speed: 1st Layer: 20,2 lb. (9 1 kg) 3rd Layer: 17,010 lb. (7 716 kg) 5th Layer: 14,6 lb. (6 6 kg) 514 FPM (157 m/min) Maximum Permissible Line Pull: 16,0 lb. (7 620 kg) 6X36 rope 17,1 lb. (7 784 kg) 35X7 rope Rope Diameter: Rope Length: Rope Type: 3/4 in. (19 mm) 0 ft. (183 m) Main Hoist 7 ft. (1 m) Auxiliary Hoist Maximum Rope Stowage: 841 ft. (256 m) 6 x 36 EIPS IWRC, Special Flexible 35 x 7 Flex-x, Rotation Resistant 3 *Denotes optional equipment
4 specifications 4 Carrier Chassis Triple box section, four-axle carrier, fabricated from high strength, low alloy steel with towing and tie-down lugs. Lights Full lighting package including turn indicators, head, tail, brake, and hazard warning lights. Outrigger System Four hydraulic telescoping, two-stage, double box beam outriggers with inverted jack and integral holding valves. Quick release type outrigger floats 24 in. (610 mm) diameter. Three position setting with fully extended, intermediate (%) extended and fully retracted capacities. Maximum outrigger pad load: 101,0 lb. Outrigger Controls Located in the superstructure cab and on either side of the carrier. Crane level indicator (sight bubble). Engine Cummins ISM 4 six cylinder turbo-charged and after cooled diesel engine, 661 cu. in. (10.8 L), 4 bhp (298 kw) 10 RPM. Maximum torque 1,4 ft. lbs. ( RPM. Equipped with engine compression brake, audio-visual engine distress system, ether cold start aid and cruise control. Fuel Tank Capacity 97 gallons (367 L). Transmission Roadranger Ultra Shift 10 speeds forward, 2 reverse. 2 speed auxiliary transmission. Drive 8 x 4 x 4. Steering Front axles, single circuit, mechanical steering with hydraulic power assist. Turning radius: 45.1 ft. Axles Front: (2) beam-type steering axles, 83.4 in. (2.12 m) track. Rear: (2) single reduction drive axles, 74.5 in. (1.89 m) track. Inter-axle differential locks. Brakes S-cam, dual air split system operating on all wheels. Springapplied, air released parking brake acting on rear axles. Air dryer. Suspension Front: Walking beam with air bags and shock absorbers. Rear: Walking beam with air bags and shock absorbers. Tires Front: 445/R 22.5 tubeless, mounted on aluminum disc wheels. Rear: 315/R 22.5 tubeless, mounted on aluminum disc wheels. Cab One man design, aluminum fabricated with acoustical lining and tinted safety glass throughout. Deluxe fabric covered seat with air adjustment. Complete driving controls and engine instrumentation including tilt telescope steering wheel, tachometer, speedometer, voltmeter, water temp., oil pressure, fuel level, air pressure gauge with A/V warning and engine high temp./low oil pressure A/V warning. Other standard items include hot water heater/defroster, electric windshield wash/wipe, fire extinguisher, seat belt and door lock. Electrical System Two 12V maintenance free batteries provides 12 V electrical system. Standard battery disconnect. Maximum Speed MPH (104 kph) % Gradeability (Theoretical) Miscellaneous Standard Equipment Aluminum fenders with rear storage compartments; dual rear view mirrors; electronic back-up alarm; sling/tool box; tire inflation kit; air cleaner restriction indicator; headache ball stowage; aluminum wheels, datalogger. *Optional Equipment *Flashing Light Package (Includes amber strobe for superstructure and carrier cabs) *Air conditioning *Dual boom base mounted floodlights *Hookblocks *Pintle hook (rear) *Cross axle differential locks *Trailing Boom Package *Aluminum outrigger pads *Air horn *Heavy Counterweight package *Tow cable *LMI light bar *Wind speed indicator *Winterfront radiator cover *Denotes optional equipment
5 dimensions R54 (164) 8.59 (2618) OVERALL (2587) 8.49 CARRIER MAX. R (162) R53 (16184) R (152) 28 o R45 (13779) TURNING RADIUS R46 (13981) OUTSIDE CURB CLEARANCE R15 TAIL SWING 7.58 (2312) RET () MID EXT (7315) FULLY EXT (2117) FRONT TRACK 32 o R32 (98) INSIDE CURB CLEARANCE 6.26 (17) REAR TRACK.93 (284) (882) RET. (120) (15182) (4446) 1.37 (416) ROTATION 7.22 (2200) (4498) 6.00 (1828) 3.16 (964) 2.83 (863) 3.21 (978) 3. (1143) 5.21 (1588) (3398) 1.63 (497) 2.56 (781) 5.86 (1786) 8.32 (2537) 7.39 (2253) o (318) 2.08 STROKE 1.76 (635) (536) 4.15 (1264) 8.66 (2641) 5.00 (1524) (13) (113911) 18. (5639) 9.42 (28) 2.87 (873) 5.00 (1524) 8.92 (2718) 1.73 (526).79 (241) CARRIER BRG PLATE 4.11 (1254) 20 o 1.67 STROKE (8) 1.18 (361) 1.46 (445) 1.67 (510) (3056) 4.82 (1468) (3426) Unit Configuration lb. (kg.) Front Rear Gross Maximum Design Allowable Axle/Tire Loads 49,200 (22 317),000 (27 216) 109,200 (49 533) Basic machine including 128 ft. (39 m) main boom, main hoist with cable, full fuel & hydraulic oil, zero counterweight, 200 lb. driver 38,469 (17 4) 41,439 (18 796) 79,8 (36 246) Add auxiliary hoist with cable, auxiliary boom nose, 0 lbs. rigging & cribbing, zero counterweight 38,5 (17 491) 42,323 (19 198),883 (36 689) Add ft. Bi-fold swingaway with brackets 41,2 (18 871) 41,913 (19 012) 83,515 (37 882) Add T block tied to front bumper & 10 T headache ball stowed 43,767 (19 3) 41,139 (18 661) 84,6 (38,513) Add 4,000 lb. counterweight pinned to superstructure 41,663 (18 898) 47,289 (21 4) 88,2 ( 349) Add 8,000 lb. counterweight (4,000 lb. on deck/4,000 lb. pinned to superstructure) 45,012 (20 417) 47,923 (21 738) 92,935 (42 1) Add 10,000 lb. counterweight (6,000 lb. on deck/4,000 lb. pinned to superstructure) 46,696 (21 181) 48,239 (21 881) 94,935 (43 063) Add 12,000 lb. counterweight (8,000 lb. on deck/4,000 lb. pinned to superstructure) 48,391 (21 9) 48,7 (22 025) 96,948 (43 976) Add 14,000 lb. counterweight (8,000 lb. on deck/6,000 lb. pinned to superstructure) 47,330 (21 469) 51,615 (23 413) 98,945 (44 881) Add 18,000 lb. counterweight (10,000 lb. on deck/8,000 lb. pinned to superstructure) 47,943 (21 747),018 (24 6) 102,961 (46 3) Additions: Air conditioning carrier (36) -17 (-8) 63 (29) Air conditioning superstructure -32 (-15) 225 (102) 193 (88) Aluminum outrigger pads -6 (-3) -66 (-30) -72 (-33) Remove: ft. bi-fold swingaway -3,042 (-1 3) 410 (186) -2,632 (-1 194) T block -1,327 (-2) 4 (229) -823 (-373) 10T headache ball -838 (-3) 2 (122) -568 (-258) Auxiliary hoist cable 448 (203) -1,237 (-561) -789 (-358) Effect per foot of extending boom: 762 (-346) -762 (346) 0 (0) Load Chart Configurations 4,000 lb. 6,000 lb. 3,000 lb. 8,000 lb. 2X 10,000 lb. X X 12,000 lb. 3X 14,000 lb. 2X X 18,000 lb. 3X X 24,000 lb. 3X X 2X
6 dimensions 6 Sub Boom title over front Front 32,272 lb. ( kg.) Rear 33,9 lb. ( kg.) Dolly 24,825 lb. ( kg.) Unit Configuration: ft. ( m) boom ft. (10-17 m) stowed swingaway Main and auxiliary hoists with cable ton hook block hanging from boom nose 10 ton headache ball stowed in front tray 0 lbs of Rigging & Cribbing Driver 2 axle boom dolly [6,200 lb. (2 812 kg.)] No counterweight Gross,6 lb. ( kg.) Additions: 8,000 lb. (3 629 kg.) counterweight stowed on the chassis deck 10,000 lb. (4 536 kg.) counterweight stowed on the boom dolly Front Rear Dolly Gross 39,032 lb. (17 5 kg.) 34,878 lb. ( kg.) 34,1 lb. (15 8 kg.) 108,761 lb. ( kg.)
7 ' main boom ' lattice extension 220 (BOOM DEFLECTION NOT SHOWN) o 20 o 0 o 56' EXT 1 33' EXT HEIGHT FROM GROUND IN FEET o o o (BOOM DEFLECTION NOT SHOWN) o o 128 BOOM LENGTH AND EXTENSION IN FEET o o 20 o 0 o 56' EXT 33' EXT o 0 o HEIGHT FROM GROUND IN FEET o o o o o 128 BOOM LENGTH AND EXTENSION IN FEET 78 o MAX. BOOM ANGLE o 20 o o MAX. BOOM ANGLE AXIS OF ROTATION 10 0 OPERATING RADIUS o IN FEET FROM AXIS OF ROTATION AXIS OF ROTATION OPERATING RADIUS IN FEET FROM AXIS OF ROTATION 118. [9-11 ] Dimensions are for Largest Grove furnished Hook Block and Overhaul Ball, with Anti-Two Block Activated.
8 working range ' main boom ' lattice extension + 20' or ' insert o 20 o 0 o HEIGHT FROM GROUND IN FEET o o o o 128 BOOM & EXTENSION LENGTH IN FEET 30 o o 20 o 0 o 220 o HEIGHT FROM GROUND IN FEET o 0 o o 128 o o o o BOOM & EXTENSION LENGTH IN FEET 78 o MAX BOOM ANGLE AXIS OF ROTATION 20 o OPERATING RADIUS IN FEET FROM AXIS OF ROTATION o 78 o MAX BOOM ANGLE 10 0 o AXIS OF ROTATION OPERATING RADIUS IN FEET FROM AXIS OF ROTATION 118. [9-11 ] Dimensions are for Largest Grove furnished Hook Block and Overhaul Ball, with Anti-Two Block Activated.
9 4 2 3( ) 4( ) 1 0 ) 7( ( 00 9( 00 1( ) ( ft. 24,000 lbs % spread 3º , , ,000 (),0 111,000 87,6 67,0,5 (31) See Note 16 () 67,4 (54),0 (46.5) 38,0 (37) 30,300 (24) (),0 67,2,7 (.5) 38,7 30,0 (42) 24,5 (33.5) 20,0 (21.5) () (.5) 38,6 30,0 24,0 (45.5) 20,2 (39) 16,7 (31.5) 13,9 (20.5) (76.5) (69) () 38,1 31,5 (57) 25,0 21,1 17,6 14,0 12,4 (29) 10,0 (18.5) 38,0 () 38,0 38,0 34, () 30,0 26,0 (57.5) 22,0 18,0 15,6 13,300 () 11,300 (34) 9,6 (27.5) 8,220 (17.5) *38,0 38,0 36,1 (.5) 31,3 27,0 24,0 21,8 19,300 16,4 14,1 (47) 12,1 10,0 (38) 9, (32.5) 7,8 (26) 6,0 (17) *31,9 31,9 (.5) 31,9 (72.5) 29,300 () 25,6 22,0 20,2 18,200 (58.5) 16,4 (.5) 14,5 12,0 10,9 9,530 (41) 8,300 7,220 (31) 6,2 (25) 5,410 (16) *25,7 25,7 25,7 23,0 21,4 19, 17, 15,4 14,000 (56) 12,0 (53) 11,3 () 9,9 (47) 8,710 (43) 7,620 (39.5) 6,6 (35) 5,810 (30) 5,0 (24) 4,3 (16) *14,0 14,0 (.5) 14,0 14,0 14,0 14,0 14,0 14,0 13,3 12,1 (56) 11,0 10, (.5) 9,0 8,000 7,030 (.5) 6,1 5,410 (32) 4,720 (27) 4,0 (21) 3,530 (10) +9 Minim um b o o m a ng le (d e g.) fo r indicate d le ng th (no lo a d ) 9 Maximum boom length ( ft.) at 0 deg. b o o m a ng le (no lo a d ) #LMI operating code. Refer to LMI manual for instructions. *This capacity is based upon maximum obtainable boom angle. Note: ( ) Boom angles are in degrees. + Special equipment is required to lift this capacity. pa rts of line required to lift this capacity (usin g aux. bo om nose). Refer to Op erator's & Safety Han dbook for reeving diagram. Lifting Capacities at Zero Degree Boom Angle * )36( ( ) y Boom Main Boom Length in Angle 1.3 0,7 15,1 0, 6, 5,10 3,9 2,9 2,0 1, ( ).8).8) 2.8.8) Note: R eference radii in feet. *This bo om length is with inner-mid fully exten ded and outer-mid & fly full retra cted. A
10 ft ft. 24,000 lbs % 24 ft. 0 in. 3º *11,0 11,0 (.5) 11,0 11,0 11,0 () 11,000 10,000 9,1 8,4 7,820 () 7,2 6,7 (.5) 6,2 5,8 5,510 5,1 (46) 4,7 (43.5) 4,200 (.5) 3,6 (37.5) 3,1 (34) 2,710 (30.5) 2,2 (26.5) 1,910 (21.5) 1,5 (14.5) 33 ft. LENGTH 2 *11,0 10,0 () 9,7 9,020 8,3 7,7 7,2 (.5) 6,7 6,3 5,9 5,6 5,320 5,030 4,7 4,510 (46.5) 4,2 3,9 (41) 3,420 (37.5) 2,930 (34) 2,4 (29.5) *9,0 8,4 (.5) 7,920 7,430 6,9 () 6,5 6,210 (.5) 5,8 5,5 5,2 5,020 4,7 (54) 4,5 4,3 4,1 6,0 (77.5) 6,0 6,0 6,0 6,0 6,0 6,0 6,0 6,0 5,5 (63) 5,1 4,7 (59.5) 4,4 (57.5) 4, (.5) 3,8 3,5 3,3 3,1 2,9 (45.5) 2,7 (43) 2,5 (.5) 2,430 (38) 2, (35) 1,7 (31.5) 1,4 (28) 1,1 (24) 56 ft. LENGTH 2 *6,0 5,0 () 5,730 5,330 4,9 () 4,6 4,3 4,0 3,8 3,610 (.5) 3,0 (58.5) 3,200 3,020 2,8 2,6 () 2,5 (48) 2,0 2,2 2,1 (39.5) 2,030 (36) 1,7 (32.5) *4,930 4,6 4,3 4, 3,8 () 3,6 3,4 3,300 3, 2,9 () 2,820 2,6 (.5) 2,5 (53) 2,420 (.5) 2,300 NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J The 33 ft. extension length may be used with single or double part line lifting service. The 56 ft. extension length may be used for single line lifting service only. 3. For main boom lengths less than 128 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 7. When lifting over the main boom nose with 33 ft. or 56 ft. extension erected, the outriggers must be fully extended or % extended (15 ft. 5 in. spread). Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. A #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle.
11 ft ft ft. 24,000 lbs % 24 ft. 0 in. 3º ft. (56 ft. LENGTH + 1 INSERT) 96 ft. (56 ft. LENGTH + 2 INSERTS 4,8 (77.5) 4,8 4,8 4,8 4,8 4,8 () 4,730 4,310 3,9 (.5) 3,610 3,310 3,0 (.5) 2,7 2,5 (57) 2,3 (.5) 2,1 1,9 1,820 () 1,6 (48) 1,530 (46) 1,0 (43.5) 1,2 (41.5) 1,1 (39) 1,0 2 *5,2 4,8 (76.5) 4,4 () 4, 3,7 3,0 () 3,2 3,000 2,7 () 2,5 2,3 2,200 () 2,030 1,8 1,730 1,5 1,4 (.5) 1,3 (48) 1,230 (46) 1, (43.5) 1,020 (.5) 4,0 3,0 (.5) 3,2 3,030 2,830 (.5) 2,630 2,4 2,2 () 2, (63) 1,9 1,830 1,0 (57) 1,5 () 1,4 1,3 (.5) 1,230 (48) 1, (.5) (72.5) 3,300 () 2,9 2,6 2,3 (.5) 2,1 1,920 1,520 (59.5) 1,3 1,1 1,0 () 2 3,7 3,420 (.5) 3, 2,820 2,5 2,320 () 2, 1,0 (.5) 1,5 1,3 1,230 (.5) 1,0 *3,2 2,720 2,4 2,2 2,0 1,8 () 1,5 1,3 () 1,2 1, NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J The 33 ft. extension length may be used with single or double part line lifting service. The 56 ft. extension length may be used for single line lifting service only. 3. For main boom lengths less than 128 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 7. When lifting over the main boom nose with 33 ft. or 56 ft. extension erected, the outriggers must be fully extended or % extended (15 ft. 5 in. spread). Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. A #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle.
12 ft. 18,000 lbs % 3º Main Boom Length in , , ,000 (),0 111,000 87,6 63,0 45,4 (31) () 63,7 (54) 45,6 (46.5) 34,4 (37) 26,0 (24) (),0 63,300 45,0 (.5) 34,5 27,000 (42) 21,5 (33.5) 17,4 (21.5) () (.5) 34,0 27, 21,0 (45.5) 17,0 (39) 14,0 (31.5) 11,0 (20.5) (76.5) (69) () 35,4 28,0 (57) 22,6 18,5 15,300 12,0 10,5 (29) 8,7 (18.5) 38,0 () 38,0 38,0 34, () 28,9 23,0 (57.5) 19,4 16,1 13,0 11,3 () 9,5 (34) 8,010 (27.5) 6,6 (17.5) Minimum boom angle (deg.) for indicated length (no load) Maximum boom length (ft.) at 0 deg. boom angle (no load) #LMI operating code. Refer to LMI manual for instructions. *This capacity is based upon maximum obtainable boom angle. Note: ( ) Boom angles are in degrees. + Special equipment is required to lift this capacity. ++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram. Lifting Capacities at Zero Degree Boom Angle Boom Main Boom Length in Angle 20,7 15,1 10,0 6,0 (34.1) (42.8) (52.8) (63) Note: ( ) Reference radii in feet. **This boom length is with inner-mid fully extended and outer-mid & fly fully retracted. 5, (72.8) 3,0 (82.8) *38,0 38,0 36,1 (.5) 31,3 27,0 24,3 20,200 16,9 14,3 12,200 (47) 10,0 8,8 (38) 7,5 (32.5) 6,4 (26) 5,4 (17) 2,0 (92.8) *31,9 31,9 (.5) 31,9 (72.5) 29,300 () 25,6 22,0 20,2 17,300 (58.5) 14,7 (.5) 12,0 10,8 9,320 8,010 (41) 6,8 5,8 (31) 5,000 (25) 4,220 (16) 2,000 (102.8) *25,7 25,7 25,7 23,0 21,4 19, 17, 15, 13,000 (56) 11,2 (53) 9,7 () 8,430 (47) 7,2 (43) 6,2 (39.5) 5,410 (35) 4,620 (30) 3,920 (24) 3,2 (16) *14,0 14,0 (.5) 14,0 14,0 14,0 14,0 14,0 14,0 13,3 11,0 (56) 10, 8,7 (.5) 7,6 6,6 5,7 (.5) 4,9 4,2 (32) 3,6 (27) 3,0 (21) 2,5 (10) 9 1,300 (112.8) A
13 ft ft. 18,000 lbs % 3º *11,0 11,0 (.5) 6,0 (77.5) 45 11,0 *11,0 6,0 11,0 10,0 *9,0 6,0 () 11,0 () 9,7 8,4 (.5) 6,0 11,000 9,020 7,920 6,0 *6,0 10,000 8,3 7,430 6,0 5,0 () 9,1 7,7 6,9 () 6,0 5,730 *4,930 8,4 7,2 6,5 6,0 5,330 4,6 (.5) 7,820 () 6,7 6,210 (.5) 6,0 4,9 () 4,3 7,2 6,3 5,8 5,5 (63) 4,6 4, 6,7 5,9 5,5 5,1 4,3 3,8 (.5) () 6,2 5,6 5,2 4,7 (59.5) 4,0 3,6 5,7 5,320 5,020 4,4 (57.5) 3,8 3,4 5,020 5,030 4,7 4, 3,610 3,300 (54) (.5) (.5) 4,3 (46) 4,7 4,5 3,8 3,0 (58.5) 3, 3,7 (43.5) 4,1 (46.5) 4,3 3,5 3,200 2,9 () 3,220 3,5 3,8 3,3 3,020 2,820 (.5) 125 2,710 (37.5) 3,020 (41) 3,1 2,8 2,6 (.5) 2,2 (34) 2,520 (37.5) 2,810 (45.5) 2,6 () 2,5 (53) 135 1,830 2,0 2,0 2,5 2,420 (30.5) (34) (43) (48) (.5) 1 1,4 (26.5) 1,6 (29.5) 2,030 (.5) 2,0 2, ,0 (21.5) 1,6 (38) 2, 1 1,3 1,730 (35) (39.5) 1 1,0 (31.5) 1,3 (36) 1 1,0 (32.5) Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. A #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J The 33 ft. extension length may be used with single or double part line lifting service. The 56 ft. extension length may be used for single line lifting service only. 3. For main boom lengths less than 128 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 7. When lifting over the main boom nose with 33 ft. or 56 ft. extension erected, the outriggers must be fully extended or % extended (15 ft. 5 in. spread).
14 ft. 56 ft ft. 18,000 lbs % 3º 2 4,8 (77.5) 4,8 4,8 4,8 *5,2 (.5) 4,8 4,8 (76.5) 4,8 4,4 () () (72.5) 4,730 4, 4,0 4,310 3,7 3,0 3,300 (.5) () 3,9 3,0 3,2 2,9 (.5) () 3,610 3,2 3,030 2,6 3,310 3,000 2,830 2,3 (.5) (.5) 3,0 2,7 2,630 2,1 (.5) () 2,7 2,5 2,4 1,920 2,5 2,3 2,2 (57) () 2,3 2,200 2, 1,520 (.5) () (63) (59.5) 125 2,1 2,030 1,9 1,3 1,9 1,8 1,830 1, ,820 1,730 1,0 1,0 () (57) () 1 1,6 1,5 1,5 (48) () 145 1,530 1,4 1,4 (46) (.5) 1 1,0 1,3 1,3 (43.5) (48) (.5) 1 1,1 1,230 1,230 (41.5) (46) (48) 1 1, 1, (43.5) Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. 2 3,7 3,420 (.5) 3, 2,820 2,5 2,320 () 2, 1,0 (.5) 1,5 1,3 1,230 (.5) 1,0 *3,2 2,720 2,4 2,2 2,0 1,8 () 1,5 1,3 () 1,2 1, A NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J The 56 ft. extension length may be used for single line lifting service only. 3. For main boom lengths less than 128 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 7. When lifting over the main boom nose with 56 ft. extension erected and inserts, the outriggers must be fully extended and vertical jacks set.
15 ft. 14,000 lbs % 3º 41.3 ** Main Boom Length in , ,000 () ,0 () ,000 () 15,000 (76.5) 20,200 84,0 84,6 38,0 *38,0 *31,9 () () 25 59,1 59,1 58,0 38,0 38,0 31,9 *25,7 *14,0 (54) (.5) (69) (.5) 30 41,9 42,1 42, 38,0 36,1 31,9 25,7 14,0 (31) (46.5) (.5) () (.5) (72.5) (.5) 35 31,0 31,7 31,0 32,0 33,0 31,3 29,300 25,7 14,0 (37) () () 24,4 24,6 24,7 25,6 26,5 27,0 25,6 23,0 14,0 (24) (42) (57) 45 19,0 19,6 20,6 21,0 22,3 22,6 21,4 14,0 (33.5) (45.5) (57.5) 15,6 15,0 16,7 17,6 18,0 18,7 19, 14,0 (21.5) (39) 12,0 13,0 14,5 15,3 15,0 16, 14,0 (31.5) (58.5) 10,0 11,2 12,0 12,0 13,300 13,6 14,1 (20.5) (.5) 9,2 10,0 10,0 11,300 11,0 12, (29) () (47) (56) 7,5 8,3 9,220 9,6 10,0 10,0 (18.5) (34) (53) (56) 6,0 7,7 8,210 8,630 8,9 (27.5) (38) () 5,6 6,5 6,9 7,3 7,7 (17.5) (32.5) (41) (47) (.5) 5,4 5,910 6,320 6,0 (26) (43) 4,5 4,9 5,3 5,7 (17) (31) (39.5) 4,1 4,5 4,930 (25) (35) (.5) 3,420 3,810 4,1 (16) (30) 3,1 (24) (32) 2,5 2,930 (16) (27) 2,3 (21) 1,0 (10) Minimum boom angle (deg.) for indicated length (no load) Maximum boom length (ft.) at 0 deg. boom angle (no load) 9 #LMI operating code. Refer to LMI manual for instructions. *This capacity is based upon maximum obtainable boom angle. Note: ( ) Boom angles are in degrees. ++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diag ram. Lifting Capacities at Zero Degree Boom Angle Boom Main Boom Length in Angle 41.3 ** 20,7 15,1 10,0 6,0 (34.1) (42.8) (52.8) (63) Note: ( ) Reference radii in feet. **This boom length is with inner-mid fully extended and outer-mid & fly fully retracted. 5, (72.8) 3,0 (82.8) 2,0 (92.8) 2,000 (102.8) 1,300 (112.8) A
16 ft. 14,000 lbs ft. % 3º *11,0 11,0 (.5) 11,0 11,0 11,0 () 11,000 10,000 9,1 8,4 7,820 () 7,2 6,5 (.5) 5,710 4,9 4,2 3,630 (46) 3,0 (43.5) 2,5 (.5) 2,0 (37.5) 1,6 (34) 1,2 (30.5) 2 *11,0 10,0 () 9,7 9,020 8,3 7,7 7,2 (.5) 6,7 6,3 5,9 5,6 5,320 4,7 4,0 3,4 (46.5) 2,0 2,3 (41) 1,920 (37.5) 1,4 (34) 1,0 (29.5) *9,0 8,4 (.5) 7,920 7,430 6,9 () 6,5 6,210 (.5) 5,8 5,5 5,2 5,020 4,7 (54) 4,410 3,7 3,1 6,0 (77.5) 6,0 6,0 6,0 6,0 6,0 6,0 6,0 6,0 5,5 (63) 5,1 4,7 (59.5) 4,4 (57.5) 4, (.5) 3,8 3,5 3,0 2,610 2,200 (45.5) 1,820 (43) 1,4 (.5) 1,1 (38) Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. 2 *6,0 5,0 () 5,730 5,330 4,9 () 4,6 4,3 4,0 3,8 3,610 (.5) 3,0 (58.5) 3,200 3,020 2,8 2,6 () 2,3 (48) 1,9 1,5 1,210 (39.5) *4,930 4,6 4,3 4, 3,8 () 3,6 3,4 3,300 3, 2,9 () 2,820 2,6 (.5) 2,5 (53) 2,420 (.5) 2,220 A NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J The 33 ft. extension length may be used with single or double part line lifting service. The 56 ft. extension length may be used for single line lifting service only. 3. For main boom lengths less than 128 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 7. When lifting over the main boom nose with 33 ft. or 56 ft. extension erected, the outriggers must be fully extended or % extended (15 ft. 5 in. spread).
17 ft. 56 ft ft. 14,000 lbs % 3º ,8 (77.5) 4,8 4,8 4,8 4,8 4,8 () 4,730 4,310 3,9 (.5) 3,610 3,310 3,0 (.5) 2,7 2,5 (57) 2,3 (.5) 2,1 1,9 1,820 () 1,0 (48) 1,2 (46) 2 *5,2 4,8 (76.5) 4,4 () 4, 3,7 3,0 () 3,2 3,000 2,7 () 2,5 2,3 2,200 () 2,030 1,8 1,730 1,5 1,4 (.5) 1,3 (48) 1, (46) 4,0 3,0 (.5) 3,2 3,030 2,830 (.5) 2,630 2,4 2,2 () 2, (63) 1,9 1,830 1,0 (57) 1,5 () 1,4 1,3 (.5) 1,230 (48) 1,020 (.5) (72.5) 3,300 () 2,9 2,6 2,3 (.5) 2,1 1,920 1,520 (59.5) 1,3 1,1 1,0 () 1 Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. 2 3,7 3,420 (.5) 3, 2,820 2,5 2,320 () 2, 1,0 (.5) 1,5 1,3 1,230 (.5) 1,0 *3,2 2,720 2,4 2,2 2,0 1,8 () 1,5 1,3 () 1,2 1, A NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J The 56 ft. extension length may be used for single line lifting service only. 3. For main boom lengths less than 128 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 7. When lifting over the main boom nose with 56 ft. extension erected and inserts, the outriggers must be fully extended and vertical jacks set.
18 ft. 12,000 lbs % 3º Main Boom Length in , , ,000 () 128,0,000 83,9 56,8,200 (31) () 83,6 56,0 (54),0 (46.5) 30,200 (37) 23,2 (24) Minimum boom angle (deg.) for indicated length (no load) () 83,4 56,4,3 (.5) 30,3 23,4 (42) 18,0 (33.5) 14,7 (21.5) () (.5),0 30,2 23,5 18,6 (45.5) 14,9 (39) 12,000 (31.5) 9,6 (20.5) (76.5) (69) () 31,200 24,0 (57) 19,0 15,8 12,0 10,0 8,5 (29) 6,9 (18.5) 38,0 () 38,0 38,0 32,200 () 25,0 20,4 (57.5) 16,7 13,7 11,3 9,0 () 7,7 (34) 6,3 (27.5) 5,1 (17.5) *38,0 38,0 36,1 (.5) 31,3 26,4 21,300 17,0 14,5 12,200 10,2 (47) 8,620 7,230 (38) 6,0 (32.5) 5,010 (26) 4, (17) *31,9 31,9 (.5) 31,9 (72.5) 29,300 () 25,6 21,6 17,8 14,0 (58.5) 12,5 (.5) 10,6 9,0 7,6 6,4 (41) 5,430 4,520 (31) 3,730 (25) 3,020 (16) *25,7 25,7 25,7 23,0 21,4 18,200 15,300 12,9 11,0 (56) 9,4 (53) 8,0 () 6,8 (47) 5,8 (43) 4,930 (39.5) 4, (35) 3,410 (30) 2,7 (24) 2,1 (16) *14,0 14,0 (.5) 14,0 14,0 14,0 14,0 14,0 13,4 11,4 9,810 (56) 8,430 7,2 (.5) 6,220 5,320 4,510 (.5) 3,7 3,1 (32) 2,5 (27) 2,0 (21) 1,5 (10) 9 Maximum boom length (ft.) at 0 deg. boom angle (no load) #LMI operating code. Refer to LMI manual for instructions. *This capacity is based upon maximum obtainable boom angle. Note: ( ) Boom angles are in degrees. Lifting Capacities at Zero Degree Boom Angle Boom Angle Main Boom Length in 41.3 ** 20,7 15,1 10,0 6,0 5, 3,0 2,0 (34.1) (42.8) (52.8) (63) (72.8) (82.8) (92.8) Note: ( ) Reference radii in feet. **This boom length is with inner-mid fully extended and outer-mid & fly fully retracted. 2,000 (102.8) 1,300 (112.8) A
19 ft ft. 12,000 lbs % 3º *11,0 11,0 6,0 (.5) (77.5) 45 11,0 *11,0 6,0 11,0 10,0 *9,0 6,0 () 11,0 () 9,7 8,4 (.5) 6,0 11,000 9,020 7,920 6,0 *6,0 10,000 8,3 7,430 6,0 5,0 () 9,1 7,7 6,9 () 6,0 5,730 *4,930 8,4 7,2 6,5 6,0 5,330 4,6 (.5) 7,820 () 6,7 6,210 (.5) 6,0 4,9 () 4,3 7,0 6,3 5,8 5,5 4,6 4, (63) 6, (.5) 5,9 5,5 5,1 4,3 3,8 () 5,2 5,6 5,2 4,7 4,0 3,6 (59.5) 4,5 5, 5,020 4,4 3,8 3,4 (57.5) 3,8 4,3 4,7 (54) 4, (.5) 3,610 (.5) 3,300 3,2 3,710 4,0 3,720 3,0 3, (46) (58.5) 2,720 (43.5) 3, (46.5) 3,420 3,200 3,200 2,9 () 2,220 2,5 2,8 2,730 3,020 2,820 (.5) 125 1,7 (37.5) 2,0 (41) 2,2 2,8 2,6 (.5) 1,3 (34) 1,610 (37.5) 1,0 (45.5) 2,510 () 2,5 (53) 135 1,1 1,530 2,0 2,410 (34) (43) (48) (.5) 1 1,1 (.5) 1,6 1, ,300 Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. A #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J The 33 ft. extension length may be used with single or double part line lifting service. The 56 ft. extension length may be used for single line lifting service only. 3. For main boom lengths less than 128 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 7. When lifting over the main boom nose with 33 ft. or 56 ft. extension erected, the outriggers must be fully extended or % extended (15 ft. 5 in. spread).
20 ft. 56 ft ft. 12,000 lbs % 3º 2 4,8 (77.5) 4,8 4,8 4,8 *5,2 (.5) 4,8 4,8 (76.5) 4,8 4,4 () () (72.5) 4,730 4, 4,0 4,310 3,7 3,0 3,300 (.5) () 3,9 3,0 3,2 2,9 (.5) () 3,610 3,2 3,030 2,6 3,310 3,000 2,830 2,3 (.5) (.5) 3,0 2,7 2,630 2,1 (.5) () 2,7 2,5 2,4 1,920 2,5 2,3 2,2 (57) () 2,3 2,200 2, 1,520 (.5) () (63) (59.5) 125 2,1 2,030 1,9 1,3 1,9 1,8 1,830 1, ,6 1,730 1,0 1,0 () (57) () 1 1,320 1,5 1,5 (48) () 145 1,4 1,4 (.5) 1 1,1 1,3 (48) (.5) 1 1, (48) Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. 2 3,7 3,420 (.5) 3, 2,820 2,5 2,320 () 2, 1,0 (.5) 1,5 1,3 1,230 (.5) 1,0 *3,2 2,720 2,4 2,2 2,0 1,8 () 1,5 1,3 () 1,2 1, A NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J The 56 ft. extension length may be used for single line lifting service only. 3. For main boom lengths less than 128 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 7. When lifting over the main boom nose with 56 ft. extension erected and inserts, the outriggers must be fully extended and vertical jacks set.
21 ft. 10,000 lbs % 3º Main Boom Length in , , ,0 () 128, ,0 82,0 54,5 38,4 (31) () 82,0 54,0 (54) 38,6 (46.5) 28,0 (37) 22, (24) () 82,200 54,1 38,0 (.5) 28,9 22,300 (42) 17,0 (33.5) 13,8 (21.5) () (.5) 38,300 28,8 22,0 17,6 (45.5) 14,0 (39) 11,200 (31.5) 8,9 (20.5) (76.5) (69) () 29,0 23,300 (57) 18,0 14,9 12, 9,810 7,930 (29) 6,3 (18.5) 38,0 () 38,0 38,0 30,7 () 24,200 19,4 (57.5) 15,8 12,9 10,6 8,7 () 7,1 (34) 5,7 (27.5) 4,620 (17.5) *38,0 38,0 36,1 (.5) 31,3 25,2 20,300 16,0 13,7 11,4 9,610 (47) 8,020 6,6 (38) 5,520 (32.5) 4,520 (26) 3,6 (17) *31,9 31,9 (.5) 31,9 (72.5) 29,300 () 25,0 20,0 16,9 14, (58.5) 11,8 (.5) 10,000 8,4 7, 5,9 (41) 4,9 4,0 (31) 3,300 (25) 2,610 (16) *25,7 25,7 25,7 23,0 20,0 17,300 14,0 12,2 10,0 (56) 8,8 (53) 7,520 () 6,3 (47) 5,3 (43) 4,4 (39.5) 3,0 (35) 3,000 (30) 2,3 (24) 1,830 (16) *14,0 14,0 (.5) 14,0 14,0 14,0 14,0 14,0 12,0 10,0 9,210 (56) 7,8 6,720 (.5) 5,730 4,8 4,0 (.5) 3,3 2,7 (32) 2,200 (27) 1,0 (21) 1,2 (10) #LMI operating code. Refer to LMI manual for instructions. *This capacity is based upon maximum obtainable boom angle. Note: ( ) Boom angles are in degrees. ++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diag ram. Lifting Capacities at Zero Degree Boom Angle Boom Main Boom Length in Angle 41.3 ** 20,7 (34.1) 15,1 (42.8) 10,0 (52.8) 6,0 (63) Note: ( ) Reference radii in feet. **This boom length is with inner-mid fully extended and outer-mid & fly fully retracted. 5, (72.8) 3,0 (82.8) 2,0 (92.8) 2,000 (102.8) 1,300 (112.8) A
22 ft ft. 10,000 lbs % 3º *11,0 11,0 (.5) 11,0 11,0 11,0 () 11,000 10,000 9,1 8,4 7,630 () 6,5 5,6 (.5) 4,8 4, 3,4 2,0 (46) 2,3 (43.5) 1,8 (.5) 1,4 (37.5) 1,0 (34) 2 *11,0 10,0 () 9,7 9,020 8,3 7,7 7,2 (.5) 6,7 6,3 5,9 5,4 4,6 3,9 3,3 2,7 (46.5) 2,2 1,7 (41) 1,310 (37.5) *9,0 8,4 (.5) 7,920 7,430 6,9 () 6,5 6,210 (.5) 5,8 5,5 5,2 5,020 4,3 (54) 3,6 3,0 2,510 6,0 (77.5) 6,0 6,0 6,0 6,0 6,0 6,0 6,0 6,0 5,5 (63) 5,1 4,7 (59.5) 4,4 (57.5) 3,910 (.5) 3,3 2,8 2,3 1,9 1,5 (45.5) 1,2 (43) 145 Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. 2 *6,0 5,0 () 5,730 5,330 4,9 () 4,6 4,3 4,0 3,8 3,610 (.5) 3,0 (58.5) 3,200 3,020 2,6 2,210 () 1,7 (48) 1,3 1,030 *4,930 4,6 4,3 4, 3,8 () 3,6 3,4 3,300 3, 2,9 () 2,820 2,6 (.5) 2,5 (53) 2, (.5) 1,6 A NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J The 33 ft. extension length may be used with single or double part line lifting service. The 56 ft. extension length may be used for single line lifting service only. 3. For main boom lengths less than 128 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 7. When lifting over the main boom nose with 33 ft. or 56 ft. extension erected, the outriggers must be fully extended or % extended (15 ft. 5 in. spread).
23 ft. 56 ft ft. 10,000 lbs % 3º ,8 (77.5) 4,8 4,8 4,8 *5,2 (.5) 4,8 4,8 (76.5) 4,8 4,4 () () (72.5) 4,730 4, 4,0 4,310 3,7 3,0 3,300 (.5) () 3,9 3,0 3,2 2,9 (.5) () 3,610 3,2 3,030 2,6 3,310 3,000 2,830 2,3 (.5) (.5) 3,0 2,7 2,630 2,1 (.5) () 2,7 2,5 2,4 1,920 2,5 2,3 2,2 (57) () 2,3 2,200 2, 1,520 (.5) () (63) (59.5) 125 2,1 2,030 1,9 1,3 1,7 1,8 1,830 1, ,3 1,730 1,0 1,0 () (57) () 1 1,0 1,5 1,5 (48) () 145 1,2 1,4 (.5) 1 1,200 (.5) Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. 2 3,7 3,420 (.5) 3, 2,820 2,5 2,320 () 2, 1,0 (.5) 1,5 1,3 1,230 (.5) 1,0 *3,2 2,720 2,4 2,2 2,0 1,8 () 1,5 1,3 () 1,2 1, A NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J The 56 ft. extension length may be used for single line lifting service only. 3. For main boom lengths less than 128 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 7. When lifting over the main boom nose with 56 ft. extension erected and inserts, the outriggers must be fully extended and vertical jacks set.
24 ft. 8,000 lbs % 3º Main Boom Length in , , ,0 () 127,0 109,000 81,4 52,2 36,0 (31) (),1 52,300 (54) 36,0 (46.5) 27,0 (37) 20,0 (24) () 79,2 51,8 36,8 (.5) 27,0 21, (42) 16,4 (33.5) 12,9 (21.5) () (.5) 36,0 27,4 21,200 16,0 (45.5) 13,1 (39) 10,0 (31.5) 8,2 (20.5) (76.5) (69) 37,6 () 28,0 22, (57) 17,0 14,0 11,300 9, 7,2 (29) 5,7 (18.5) 38,0 () 38,0 38,0 29,3 () 23,000 18,0 (57.5) 14,9 12,1 9,930 8,0 () 6,5 (34) 5,230 (27.5) 4, (17.5) *38,0 38,0 36,1 (.5) 30,8 24,0 19,300 15,0 12,9 10,7 8,9 (47) 7,420 6, (38) 5,000 (32.5) 4,0 (26) 3,200 (17) *31,9 31,9 (.5) 31,9 (72.5) 29,300 () 24,300 19,0 16,0 13,300 (58.5) 11,1 (.5) 9,3 7,8 6,5 5,430 (41) 4,4 3,620 (31) 2,8 (25) 2,210 (16) *25,7 25,7 25,7 23,0 19,0 16,0 13,0 11,0 9,7 (56) 8,2 (53) 6,9 () 5,8 (47) 4,8 (43) 4,020 (39.5) 3,2 (35) 2,0 (30) 2,000 (24) 1,4 (16) *14,0 14,0 (.5) 14,0 14,0 14,0 14,0 14,300 12,000 10,1 8,610 (56) 7,310 6,210 (.5) 5,2 4,420 3,6 (.5) 2,9 2,3 (32) 1,8 (27) 1,3 (21) Maximum boom length ( ft.) at 0 #LMI operating code. Refer to LMI manual for instructions. *This capacity is based upon maximum obtainable boom angle. Note: ( ) Boom angles are in degrees. ++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diag ram. Lifting Capacities at Zero Degree Boom Angle Boom Angle Main Boom Length in 41.3 ** 20,7 15,1 10,0 6,0 5,000 3,5 2,7 (34.1) (42.8) (52.8) (63) (72.8) (82.8) (92.8) Note: ( ) Reference radii in feet. **This boom length is with inner-mid fully extended and outer-mid & fly fully retracted. 1,8 (102.8) 1,1 (112.8) A
25 ft ft. 8,000 lbs % 3º *11,0 11,0 (.5) 11,0 11,0 11,0 () 11,000 10,000 9,1 8,2 7, () 6, 5,210 (.5) 4,430 3,730 3, 2,5 (46) 2,030 (43.5) 1,5 (.5) 1, (37.5) 2 *11,0 10,0 () 9,7 9,020 8,3 7,7 7,2 (.5) 6,7 6,3 5,920 5,0 4,2 3,0 2,9 2,420 (46.5) 1,910 1,4 (41) 1,010 (37.5) *9,0 8,4 (.5) 7,920 7,430 6,9 () 6,5 6,210 (.5) 5,8 5,5 5,2 4,720 3,9 (54) 3,320 2,720 2,1 6,0 (77.5) 6,0 6,0 6,0 6,0 6,0 6,0 6,0 6,0 5,5 (63) 5,1 4,7 (59.5) 4, (57.5) 3,530 (.5) 2,9 2,510 2,0 1,6 1,2 (45.5) 1 Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. 2 *6,0 5,0 () 5,730 5,330 4,9 () 4,6 4,3 4,0 3,8 3,610 (.5) 3,0 (58.5) 3,200 2,8 2,3 1,0 () 1,4 (48) 1, *4,930 4,6 4,3 4, 3,8 () 3,6 3,4 3,300 3, 2,9 () 2,820 2,6 (.5) 2,310 (53) 1,820 (.5) 1,3 A NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J The 33 ft. extension length may be used with single or double part line lifting service. The 56 ft. extension length may be used for single line lifting service only. 3. For main boom lengths less than 128 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of th next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 7. When lifting over the main boom nose with 33 ft. or 56 ft. extension erected, the outriggers must be fully extended or % extended (15 ft. 5 in. spread).
26 ft. 56 ft ft. 8,000 lbs. % 3º 2 4,8 (77.5) 4,8 4,8 4,8 *5,2 (.5) 4,8 4,8 (76.5) 4,8 () 4,4 () (72.5) 4,730 4, 4,0 4,310 3,7 3,0 (.5) 3,300 () 3,9 (.5) 3,0 () 3,2 2,9 3,610 3,2 3,030 2,6 3,310 3,000 2,830 (.5) 2,3 (.5) 3,0 (.5) 2,7 () 2,630 2,1 2,7 2,5 2,4 1,920 2,5 (57) 2,3 2,2 () 2,2 (.5) 2,200 () 2, (63) 1,520 (59.5) 125 1,8 2,030 1,9 1,3 1,4 1,8 1,830 1, , () 1,0 1,0 (57) 1 1,320 1,5 () 145 1,300 Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. 2 3,7 3,420 (.5) 3, 2,820 2,5 2,320 () 2, 1,0 (.5) 1,5 1,3 1,230 (.5) 1,0 *3,2 2,720 2,4 2,2 2,0 1,8 () 1,5 1,3 () 1,2 1, A NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J The 56 ft. extension length may be used for single line lifting service only. 3. For main boom lengths less than 128 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 7. When lifting over the main boom nose with 56 ft. extension erected and inserts, the outriggers must be fully extended and vertical jacks set.
27 ft. 4,000 lbs % 3º Main Boom Length in , , ,0 () 126,0 108,000,1 47,0 33,200 (31) () 73,0 47,7 (54) 33,0 (46.5) 24,5 (37) 18,5 (24) () 72,0 47,300 33,0 (.5) 24,0 18,7 (42) 14,4 (33.5) 11,1 (21.5) () (.5) 33, 24,6 18,8 14,5 (45.5) 11,3 (39) 8,830 (31.5) 6,0 (20.5) (76.5) (69) 34,1 () 25,5 19,7 (57) 15,5 12,2 9,720 7,6 5,9 (29) 4,5 (18.5) 38,0 () 38,0 35,2 26,5 () 20,6 16,0 (57.5) 13,1 10,5 8,4 6,7 () 5,3 (34) 4, (27.5) 3,0 (17.5) *38,0 38,0 36,1 (.5) 28,0 21,0 17,2 13,0 11,3 9,320 7,6 (47) 6,220 5,010 (38) 3,9 (32.5) 3,0 (26) 2,300 (17) *31,9 31,9 (.5) 31,9 (72.5) 28, () 21,9 17,5 14,2 11,0 (58.5) 9,710 (.5) 8,0 6,6 5,4 4,0 (41) 3,0 2,710 (31) 2,020 (25) 1,0 (16) *25,7 25,7 25,7 22,1 17,8 14,0 12, 10,0 8,430 (56) 7,0 (53) 5,8 () 4,810 (47) 3,910 (43) 3, (39.5) 2,420 (35) 1,7 (30) 1,2 (24) *14,0 14,0 (.5) 14,0 14,0 14,0 14,0 12,0 10,5 8,8 7,0 (56) 6,200 5,1 (.5) 4,2 3,510 2,810 (.5) 2,1 1,5 (32) 1,0 (27) #LMI operating code. Refer to LMI manual for instructions. *This capacity is based upon maximum obtainable boom angle. Note: ( ) Boom angles are in degrees. ++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diag ram. Lifting Capacities at Zero Degree Boom Angle Boom Main Boom Length in Angle 41.3 ** 20,7 15,1 9,6 5,7 3,8 (34.1) (42.8) (52.8) (63) (72.8) Note: ( ) Reference radii in feet. **This boom length is with inner-mid fully extended and outer-mid & fly fully retracted. 2,5 (82.8) 1,0 (92.8) 1,0 (102.8) A
28 ft ft. 4,000 lbs % 3º *11,0 11,0 (.5) 6,0 (77.5) 45 11,0 *11,0 6,0 11,0 10,0 () *9,0 6,0 11,0 () 9,7 8,4 (.5) 6,0 11,000 9,020 7,920 6,0 *6,0 9,930 8,3 7,430 6,0 5,0 () 8,4 7,7 6,9 () 6,0 5,730 *4,930 7,1 7,2 (.5) 6,5 6,0 5,330 4,6 6,0 () 6,7 6,210 (.5) 6,0 4,9 () 4,3 5,1 5,8 5,8 5,5 (63) 4,6 4, 4,310 (.5) 4,9 5,5 4,0 4,3 3,8 () 3,5 4,1 4,6 4,1 (59.5) 4,0 3,6 2,920 3,4 3,910 3,4 (57.5) 3,8 3,4 2,3 2,830 3,220 (54) 2,8 (.5) 3,610 (.5) 3,300 1,810 (46) 2,2 2,5 2,300 3,1 (58.5) 3, 1,330 (43.5) 1,720 (46.5) 2,030 1,820 2,6 2,9 () 1,2 1,520 1,0 2,1 2, ,020 2,200 (.5) 1,300 () 1,0 (53) 135 1,2 (.5) Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. A #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J The 33 ft. extension length may be used with single or double part line lifting service. The 56 ft. extension length may be used for single line lifting service only. 3. For main boom lengths less than 128 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of th next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 7. When lifting over the main boom nose with 33 ft. or 56 ft. extension erected, the outriggers must be fully extended or % extended (15 ft. 5 in. spread).
29 ft. 56 ft ft. % 4,000 lbs 3º ,8 (77.5) 4,8 4,8 4,8 *5,2 (.5) 4,8 4,8 (76.5) 4,8 4,4 () () (72.5) 4,730 4, 4,0 4,310 3,7 3,0 (.5) 3,300 () 3,9 (.5) 3,0 () 3,2 2,9 3,610 3,2 3,030 2,6 3,310 3,000 2,830 2,3 (.5) (.5) 3,0 (.5) 2,7 () 2,630 2,1 2,5 2,5 2,4 1,920 2,0 (57) 2,3 2,2 () 1,0 (.5) 2,200 () 2, (63) 1,320 (59.5) 125 1,1 1,9 1,9 1,510 1, ,0 1,520 (57) 1 1, () Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. 2 3,7 3,420 (.5) 3, 2,820 2,5 2,320 () 2, 1,0 (.5) 1,5 1,3 1,230 (.5) *3,2 2,720 2,4 2,2 2,0 1,8 () 1,5 1,3 () 1,2 1, A NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J The 56 ft. extension length may be used for single line lifting service only. 3. For main boom lengths less than 128 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 7. When lifting over the main boom nose with 56 ft. extension erected and inserts, the outriggers must be fully extended and vertical jacks set.
30 ft. 0 % 3º Main Boom Length in , , ,0 () 125,0,0 68,0 43, 29,0 (31) () 66,9 43,1 (54) 29,9 (46.5) 21,7 (37) 16,1 (24) () 66,0 42,0 29,0 (.5) 21,8 16,3 (42) 12,0 (33.5) 9,3 (21.5) () (.5) 29,0 21,0 16,4 12,5 (45.5) 9,5 (39) 7,230 (31.5) 5,3 (20.5) (76.5) (69) 30,6 () 22,7 17,0 (57) 13,0 10,4 8, 6,210 4,6 (29) 3,330 (18.5) 38,0 () 38,0 31,7 23,0 () 18,2 14,3 (57.5) 11,3 8,9 7,0 5,4 () 4, (34) 3,000 (27.5) 2,030 (17.5) *38,0 38,0 34,200 (.5) 25,200 19,3 15,200 12, 9,7 7,8 6,3 (47) 5,020 3,0 (38) 2,9 (32.5) 2, (26) 1,3 (17) *31,9 31,9 (.5) 31,9 (72.5) 25,5 () 19,0 15,6 12,0 10,200 (58.5) 8,330 (.5) 6,7 5,4 4,3 3,3 (41) 2,520 1,7 (31) 1, (25) *25,7 25,7 25,7 20,2 16,1 13, 10,0 8,7 7,210 (56) 5,0 (53) 4,7 () 3,7 (47) 2,920 (43) 2,1 (39.5) 1,0 (35) *14,0 14,0 (.5) 14,0 14,0 14,0 13,0 11, 9, 7,520 6,200 (56) 5,0 4, (.5) 3,2 2,510 1,820 (.5) 1,220 #LMI operating code. Refer to LMI manual for instructions. *This capacity is based upon maximum obtainable boom angle. Note: ( ) Boom angles are in degrees. ++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diag ram. Lifting Capacities at Zero Degree Boom Angle Boom Main Boom Length in Angle 41.3 ** 20,7 13,7 8,000 4,3 (34.1) (42.8) (52.8) (63) Note: ( ) Reference radii in feet. **This boom length is with inner-mid fully extended and outer-mid & fly fully retracted. 2,6 (72.8) 1,5 (82.8) 1,030 (92.8) A
31 ft ft. 0 % 3º *11,0 11,0 (.5) 6,0 (77.5) 45 11,0 *11,0 6,0 11,0 10,0 *9,0 6,0 () 11,0 () 9,7 8,4 (.5) 6,0 10,0 9,020 7,920 6,0 *6,0 8,410 8,3 7,430 6,0 5,0 () 7,010 7,6 6,9 () 6,0 5,730 *4,930 5,8 6,4 6,5 6,030 5,330 4,6 (.5) 4,8 () 5,4 6,0 (.5) 5, 4,9 () 4,3 3,9 4,5 5, 4,310 (63) 4,6 4, 3,230 3,7 4,2 3,610 4,3 3,8 (.5) () 2,5 3, 3,5 3,000 (59.5) 4,000 3,6 1,9 2,4 2,910 2,4 3,3 3,4 (57.5) 1,4 1,9 2,320 (54) 1,9 (.5) 2,810 (.5) 3,300 1,4 1,7 1,510 2,310 (58.5) 2,920 1,220 1, 1,8 2,3 () 1,430 1, ,0 1,4 (.5) 1,020 (53) Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. A #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J The 33 ft. extension length may be used with single or double part line lifting service. The 56 ft. extension length may be used for single line lifting service only. 3. For main boom lengths less than 128 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of th next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 7. When lifting over the main boom nose with 33 ft. or 56 ft. extension erected, the outriggers must be fully extended or % extended (15 ft. 5 in. spread).
32 ft. 56 ft ft. 0 % 3º 125 4,8 (77.5) 4,8 4,8 4,8 4,8 4,8 () 4,730 4,310 3,0 (.5) 3, 2,5 2,0 (.5) 1,6 1,2 (57) 2 *5,2 4,8 (76.5) 4,4 () 4, 3,7 3,0 () 3,2 3,000 2,7 () 2,410 1,9 1,5 () 1,210 4,0 3,0 (.5) 3,2 3,030 2,830 (.5) 2,630 2,4 2,2 () 2,0 (63) 1,6 1,2 (.5) (72.5) 3,300 () 2,9 2,6 2,3 (.5) 1,920 1,4 1,030 Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. 2 3,7 3,420 (.5) 3, 2,820 2,5 2,320 () 2, 1,0 (.5) 1,4 1,0 *3,2 2,720 2,4 2,2 2,0 1,8 () 1,5 1,3 () 1,2 A NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J The 56 ft. extension length may be used for single line lifting service only. 3. For main boom lengths less than 128 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 7. When lifting over the main boom nose with 56 ft. extension erected and inserts, the outriggers must be fully extended and vertical jacks set.
33 load handling Weight Reductions for Load Handling Devices 33 ft.-56 ft. Folding Boom Extension *33 ft. Extension (Erected) lb. *56 ft. Extension (Erected) lb. *76 ft. (1 insert Erected) 136 lb. *96 ft. (2 inserts Erected) 206 lb. *Reduction of main boom capacities (no deduct required for stowed boom extension) When lifting over swingaway and/or jib combinations, deduct total weight of all load handling devices reeved over main boom nose directly from swingaway or jib capacity. Line Pulls and Reeving Information Permissible Nominal Hoists Cable Specs. Line Pulls Cable Length 3/4" (19 mm) 6x37 Class, Main EIPS, IWRC Special Flexible 16,0 lb. 0 ft. Min. Breaking Strength 58,0 lb. 3/4" (19 mm) Flex-X 35 Main & Aux. Rotation Resistant (Non-rotating) 17,1 lb. 7 ft. Min. Breaking Strength,0 lb. The approximate weight of 3/4" wire rope is 1.5 lb./ft. 33 Auxiliary Boom Nose Hookblocks and Headache Balls: 136 lb. Ton, 4 Sheave 12 lb. + Ton, 3 Sheave 823 lb Ton Overhaul Ball 568 lb. + + Refer to rating plate for actual weight. NOTE: All load handling devices and boom attachments are considered part of the load and suitable allowances MUST BE MADE for their combined weights. Weights are for Grove furnished equipment. Hoist Performance Wire Hoist Line Pulls Drum Rope Rope Two Speed Hoist Capacity (ft.) Layer Low High Available lb.* Available lb.* Layer Total 1 20,2 9, ,4 8, ,010 8, ,7 7, ,6 6, *Max. lifting capacity: 6x36 or 35x7 class = 17,1 lb. Boom Section vs. Section Extension Percentages Main Boom Length in Boom sections: Percent Extension Inner-mid 0 30 Outer-mid Fly Working Area Diagram Bold lines determine the limiting position of any load for operation within working areas indicated.
34 Notes 34
35 Notes 35
36 Manitowoc Crane Group - Americas Manitowoc, Wisconsin Facility Tel: [Int + 001] Fax: [Int + 001] Shady Grove, Pennsylvania Facility Tel: [Int + 001] Fax: [Int + 001] Manitowoc Crane Group - EMEA Europe Middle East & Africa Tel: [Int + 33] (0) Fax: [Int + 33] (0) Manitowoc Crane Group - UK Europe Middle East & Africa Tel: [Int + 44] (0) Fax: [Int + 44] (0) Manitowoc Crane Group - Germany (Sales, Parts & Service) Tel: [Int + 49](0) Fax: [Int + 49] (0) Manitowoc Crane Group - France France & Africa (Sales, Parts & Service) Tel: [Int + 33] (0) Fax: [Int + 33] (0) Manitowoc Crane Group - Netherlands (Sales, Parts & Service) Tel: [Int + 31] (0) Fax: [Int + 31] (0) Manitowoc Crane Group - Italy Italy & Southern Europe (Sales, Parts & Service) Tel: [Int + 39] (0) Fax: [Int + 39] (0) Manitowoc Crane Group - Portugal Portugal & Spain (Sales, Parts & Service) Tel: [Int + 351] (0) Fax: [Int + 351] (0) Manitowoc Crane Group - Singapore Asia/Pacific excl China (Sales, Parts & Service) Tel: [Int + ] Fax: [Int + ] 6862 / 4142 Manitowoc Crane Group - Shanghai China (Sales, Parts & Service) Tel: [Int + 86] (0) Fax: [Int + 86] (0) Manitowoc Crane Group - Beijing China (Sales, Parts & Service) Tel: [Int + 86] (0) Fax: [Int + 86] (0) Manitowoc Crane Group - Middle East (Sales) Tel: [Int + 971] (0) Fax: [Int + 971] (0) (Parts & Service) Tel: [Int + 973] (0) Fax: [Int + 973] (0) Distributed By: Constant improvement and engineering progress make it necessary that we reserve the right to make speicfication, equipment, and price changes without notice. Illustrations shown may include optional equipment and accessories, and may not include all standard equipment M Printed in USA Form No. PG Part No Manitowoc Crane Group 2006
TMS900E. product guide. contents. features 90 ton (80 mton) capacity. Truck Crane ft ( m) 5 section full power boom
features 90 ton (80 mton) capacity 37-142 ft (11.2-43.2 m) 5 section full power boom Patented TWIN-LOCK boom pinning system 33-56 ft (10-17m) bifold lattice swingaway extension Optional 33-56 ft (10-17
More informationTMS9000E. Preliminary. features. Product Guide. Truck Mounted Crane
TMS9000E features Preliminary Product Guide 110 ton (90 metric ton) capacity 36-142 ft. (11-43.3 m) 5 section full power boom Patented TWIN-LOCK boom pinning system 33-56 ft. (10-17 m) manual offset bi-fold
More information43' (13.07) 18' 4" (5.59 ) 18' 6" (5.64) Turning Radius: TMS870-45' 1" (13.7 m) TTS870-29' 8" (9.04 m) (8 wheel)
Dimensions 14' 1/2" (4.28) TAILSWING 7' 7" (2.77) O/R RET. 8' 6" (2.59) 15' 5" (5.64) O/R PART. EXTENDED 24' (7.31) ' 6" (4.5) RETRACTED 137' 9" (1653.62) EXTENDED 43' (13.07) 11' 8-1/4" (3.56) 1' 8" (0.53)
More informationOperating radius in feet from axis of rotation
LIFTING CHARTS - Hydraulic Truck Cranes GROVE MODEL - 110 TON CAPACITY working range 36-142' main boom 0 Height from the ground in feet Boom and extension length in feet Operating radius in feet from axis
More informationGrove TMS700E. Product Guide. Features. 50 t or 55 t (50 USt or 60 USt) capacity
Grove TMS700E Product Guide Features 50 t or 55 t (50 USt or 60 USt) capacity 11 m 33,5 m (36 ft 1 ft) four-section, full power sequenced synchronized boom,1 m 17 m (33 ft 56 ft) offsettable bi-fold lattice
More informationTMS500E. product guide. contents. features 40 ton (40 mt) Capacity. Truck Mounted Crane
product guide features ton ( mt) Capacity 29 ft.-95 ft. (8.8-29 m) 4 section, full power synchronized boom 26 ft.- ft. (7.9-13.7 m) offsettable telescopic swingaway extension Optional 8,4 lb. (3837 kg)
More informationGrove TMS9000E. Product Guide. Features
Grove TMS9000E Product Guide Features 90 t (110 USt) capacity 11,2 m - 43,3 m (36 ft - 142 ft) five-section full power boom Patented TWIN-LOCK boom pinning system 10 m - 17 m (33 ft - 56 ft) bi-fold lattice
More informationTMS x 4 & 6 x 6
TMS5 6 x 4 & 6 x 6 Dimensions 8' (2438) TAILSWING 11' 1" (3383) 7' 8" (2337) RET 13' 9-3/4" (4210) MID EXT ' (96) EXT Note: ( ) Reference dimensions in mm 16-3/4" (425) 43' 4" (13 8) OVERALL 10' 10" (32)
More informationTMS900E. product guide. contents. features 90 ton (80 mton) capacity. Truck Crane ft ( m) 5 section full power boom
features 90 ton (80 mton) capacity 37-142 ft (11.2-43.2 m) 5 section full power boom Patented TWIN-LOCK boom pinning system 33-56 ft (10-17m) bifold lattice swingaway extension Optional 33-56 ft (10-17
More informationTMS900E. product guide. contents. features 90 ton (80 mton) capacity. Truck Crane ft ( m) 5 section full power boom
features 90 ton (80 mton) capacity 37-142 ft (11.2-43.2 m) 5 section full power boom Patented TWIN-LOCK boom pinning system 33-56 ft (10-17m) bifold lattice swingaway extension Optional 33-56 ft (10-17
More informationWorking Range GROVE MODEL TM TON CAPACITY. LIFTING CHARTS - Hydraulic Truck Cranes 9'-7"
LIFTING CHARTS - Hydraulic Truck Cranes GROVE MODEL - TON CAPACITY Working Range 42-1 ft. (12.8-39.6 m) 33-58 ft. (10.0-17.7 m) 3 FEET 210 200 1 58 48 1 1 33 1 1 1 1 1 115 85 20 10 0 20 10 0 1 1 1 1 1
More informationTMS700E. product guide. contents. features 50 or 60 ton (50 or 55 mt) Capacity. Truck Mounted Hydraulic Crane. Features 2
TMS0E product guide features or ton ( or mt) Capacity 36 ft.-1 ft. (11-33.5 m) 4 section, full power sequenced synchronized boom 33 ft.-56 ft. (.1-17 m) offsettable bi-fold lattice swingaway extension
More informationrough Terrain crane 60 tons
rough Terrain crane 60 tons grove rt700e BOOM LENGTHS: 36 to 110 ft JIB LENGTHS: 33 to 56 ft JIB OFFSETS: 0-25 - 45 NOTES: Specifications Superstructure Boom 11 m - 33,5 m (36 ft - 110 ft) four-section,
More informationTire Size 26.5 x 25 5' 5-1/2" (1661) 12' 2-1/4" (3715)
Dimensions 11' 13' 4" (64) TAILSWING 9' " (2997) OVER FENDERS 22' (66) FULL EXT 15' 9" (4801) MID EXT 9' 3-1/2" (2832) RET 9' 9-1/2" (2985) O/R A B C D E F G H 23.5 x 25 5' 4-1/4" (1631) 11' 11-1/2" (36)
More informationRT530E. product guide. contents. features 30 ton (30 mt) capacity. Rough Terrain Hydraulic Crane. Features 2. Specifications 3.
RT5E product guide contents Features 2 features ton ( mt) capacity 29-95 ft. (8.8-29 m) 4-section full power boom 26- ft. (7.9-13.7 m) telescopic swingaway extension Max main boom tip height of 2.5 ft.
More informationGrove TMS9000E Product Guide
Grove TMS9000E Product Guide Features 90 t (110 USt) capacity 11,2 m - 43,4 m (36 ft - 142 ft) five-section full power boom Patented TWIN-LOCK boom pinning system 10 m - 17 m (33 ft - 56 ft) bi-fold lattice
More informationproduct guide contents features 40 ton (40 mt) Capacity Truck Mounted Crane 29 ft.-95 ft. ( m) 4 section, full power synchronized boom
product guide features ton ( mt) Capacity 29 ft.-95 ft. (8.8-29 m) 4 section, full power synchronized boom 26 ft.- ft. (7.9-13.7 m) offsettable telescopic swingaway extension Optional 8,4 lb. (3837 kg)
More informationRT875E. product guide. contents
product guide contents Features 2 Specifications 3 Dimensions 5 Working Range 6 Bifold Load Charts 7 features 75 ton (68 mt) capacity 41 ft-128 ft (12.6 m-39.0 m) 4 section, full power boom 33 ft-56 ft
More informationRT875E. product guide. contents
product guide contents Features 2 Specifications 3 Dimensions 5 Working Range 6 Bifold Load Charts 7 features 75 ton (68 mt) capacity 41 ft-128 ft (12.6 m-39.0 m) 4 section, full power boom 33 ft-56 ft
More informationWORKING RANGE DIAGRAM
Working Range Bi-fold Swingaway 36-110 ft. (11-33.5 m) 33-56 ft. (10.1-17.1 m) 12,1 lbs. (5511 kg) 100% 360 WORKING RANGE DIAGRAM 180 170 160 1 (BOOM DEFLECTION NOT SHOWN) 40 D6-829-101026 0 25 56' 33'
More informationRT875E. product guide. contents
product guide contents Features 2 Specifications 3 Dimensions 5 Working Range 6 Bifold Load Charts 7 features 75 ton (68 mt) capacity 41 ft-128 ft (12.6 m-39.0 m) 4 section, full power boom 33 ft-56 ft
More informationfeatures also available.
features 2 The boom on the is a 29-95 ft. (8.8-29 m) four-section full power boom with a maximum tip height of 2.5 ft. (31.2 m). This synchronized boom uses a single lever joystick control to extend boom
More informationRT700E. product guide. contents
product guide contents Features 2 Specifications 3 Dimensions 5 Working Range 6 features -60 ton (-55 mt) capacity 36 ft-110 ft (11 m-33.5 m) 4 section, full power boom 33 ft (10.1 m) offsettable lattice
More informationRT535E. product guide. contents. features 35 ton (35 mt) capacity. Rough Terrain Hydraulic Crane. Features 2. Specifications 3.
product guide contents Features 2 features 35 ton (35 mt) capacity 32-102 ft. (9.8-31.0 m) 4-section full power boom 26-45 ft. (7.6-13.7 m) offsettable telescopic swingaway extension Dual-Axis electric
More informationRT530E-2. product guide. contents. features. Rough Terrain Hydraulic Crane. Features 2. Specifications ton (27 mt) capacity.
RT5E-2 product guide contents Features 2 features ton (27 mt) capacity 29 ft. - 95 ft. (8.8 m -29.0 m) 4-section full power boom 26 ft. - ft. (7.9 m - 13.7 m) offsettable telescopic swing-away extension
More informationRT700E. product guide. contents
product guide contents Features 2 Specifications 3 Dimensions 5 Working Range 6 features - ton (-55 mt) capacity 36 ft-1 ft (11 m-33.5 m) 4 section, full power boom 33 ft (.1 m) offsettable lattice swingaway
More informationRT600E. product guide. contents
product guide contents Features 2 features 33-5 ft. (-32 m) 4-section full power boom 29-51 ft. (8.8-15.5 m) telescopic swingaway extension Max main boom tip height of 112 ft. (34 m) E Series cab Max overall
More informationRT540E. product guide. contents. features. Rough Terrain Hydraulic Crane. Features 2. Specifications 3. Dimensions ton (35 mt) capacity
RT5E product guide contents Features 2 features ton ( mt) capacity 32 ft. - 2 ft. (9.8 m -31.0 m) 4-section, full power boom 26 ft. - ft. (7.9 m - 13.7 m) offsettable telescopic swing-away extension Full
More informationTMS500E. product guide. contents. features 40 ton (40 mt) Capacity. Truck Mounted Crane
TMS0E product guide features ton ( mt) Capacity 29 ft.-95 ft. (8.8-29 m) 4 section, full power sequenced synchronized boom 26 ft.- ft. (7.9-13.7 m) offsettable telescopic swingaway extension Optional 26
More informationGrove TMS800E Product Guide
View View thousands thousands of of Crane Crane Specifications Specifications on on FreeCraneSpecs.com FreeCraneSpecs.com Grove TMS800E Product Guide Features 12,6 m - 39 m (41 ft - 128 ft) four-section
More informationTMS Product Guide
TMS9000-2 Product Guide ASME B30.5 Imperial 85% Features 100 t (115 USt) 11,2 m - 51,6 m (36 ft -169 ft) six-section greaseless MEGAFORM boom TWIN-LOCK boom pinning system Several 10,5 m - 17,6 m (34.5
More informationTMS Preliminary Product Guide
TMS9000-2 Preliminary Product Guide ASME B30.5 Imperial 85% Features 100 t (115 USt) 11,2 m - 51,6 m (36 ft -169 ft) six-section greaseless MEGAFORM boom TWIN-LOCK boom pinning system Several 10,5 m -
More informationAll Terrain crane 240 tons
All Terrain crane 240 tons Grove gmk5240 BOOM LENGTHS: 44 to 197 ft JIB LENGTHS: 43 to 125 ft JIB OFFSETS: 5-20 - 40 NOTES: ALL TERRAIN HYDRAULIC CRANE Dimensions R 49'10" (15200) Ra 42'4" (120) R 47'9"
More informationTRUCK MOUNTED HYDRAULIC CRANE
TRUCK MOUNTED HYDRAULIC CRANE Dimensions STEERING RADIUS 34' 10" (10617mm) C L ROTATION 12' 0" TAILSWING (3657 mm) 8' 4.0" (25 mm) 6' 10.69" (2100 mm) FRONT TRACK 6' 0.3" (1837 mm) REAR TRACK 7' 10" (23
More informationProduct Guide. Features. 6 ft 110 ft) four-section, full power sequenced synchronized. nchronized boom. swingaway extension.
Grove TMS0E Product Guide Features ř t or t ( USt or USt) capacity ř 11 m 33,5 m (36 6 ft 110 ft) four-section, full power sequenced synchronized nchronized boom ř 10,1 m 17 m (33 33 ft 56 ft) offsettable
More informationAll Terrain crane 550 tons
All Terrain crane 550 tons Grove gmk7550 BOOM LENGTHS: 53 to 197 ft JIB LENGTHS: 82 to ft JIB OFFSETS: luffing NOTES: Specifications Superstructure Boom 16 m - m (53 ft - 197 ft) five-section, full power
More informationALL TERRAIN HYDRAULIC CRANE
ALL TERRAIN HYDRAULIC CRANE Dimensions R 49'10" (15200) Ra 42'4" (12900) R 47'9" (14550) Ra 40'6" (12350) 27'10" (8493) 17'1" (5215) 10'9" (3277) R 36'9" (11200) Ra 32'10" (10000) R 16'5" 16'1" (4900)
More information31' 8-1/2" (9666) 13' 4" (4064) TAILSWING 41' 11-1/2" (12 790) S/S OVERALL 34' 11-1/4" (10 650) RETRACTED 109' 10" (33 477) EXTENDED 7' (2134)
Dimensions 8' 2" (2489) OVER FENDERS 31' 8-1/2" (9666) 13' 4" (64) TAILSWING 7' 8" (2337) RETRACTED 13' " (4216) MID EXTENDED ' (96) EXTENDED 41' 11-1/2" (12 790) S/S OVERALL 1' 7" (484) 34' 11-1/4" (
More informationGrove TMS700E. Product Guide. Features. 50 t or 55 t (50 USt or 60 USt) capacity
Grove TMS700E Product Guide Features 50 t or 55 t (50 USt or 60 USt) capacity 11 m 33,5 m (36 ft 110 ft) four-section, full power sequenced synchronized boom 10,1 m 17 m (33 ft 56 ft) offsettable bi-fold
More informationGMK7550 Product Guide
GMK7550 Product Guide ASME B30.5 Imperial 85% Features 450 t (550 USt) capacity. m (197 ft) five-section boom. 25 m - 79 m (82 ft - 259 ft) lattice luffing jib t (264,500 lb) counterweight with hydraulic
More informationALL TERRAIN HYDRAULIC CRANE
ALL TERRAIN HYDRAULIC CRANE Dimensions R 47'7" (14500) Ra 39'8" (12100) R 45'7" (13900) 25'7" (7800) Ra 38'6" (11725) 16'1" (4892) 9'6" (2908) R 33'10" (10300) Ra 29'3" (8975) R 13'10" (4220) 10' (3070)
More informationdata GMK7550 product guide contents features 550 ton (450 mton) capacity All Terrain Crane 197 ft (60 m) 5 section full power boom
data features 5 ton (4 mton) capacity 197 ft ( m) 5 section full power boom Patented TWIN-LOCKTM boom pinning system 82 ft - ft (25 m - 73 m) lattice luffing jib 39 ft - ft (12 m - m) fixed lattice jib
More informationGrove TMS700E. Product Guide. Features. Page t or 55 t (50 USt or 60 USt) capacity
Page 1 Grove TMS0E Product Guide Features t or t ( USt or USt) capacity 11 m 33,5 m (36 ft 110 ft) four-section, full power sequenced synchronized boom 10,1 m 17 m (33 ft 56 ft) offsettable bi-fold lattice
More informationdata GMK7550 product guide contents features All Terrain Crane 550 USt (450 t) capacity 197 ft (60 m) 5 section full power boom
data features 550 USt (450 t) capacity 197 ft (60 m) 5 section full power boom Patented TWIN-LOCKTM boom pinning system 82 ft - 240 ft (25 m - 73 m) lattice luffing jib 39 ft - 230 ft (12 m - 70 m) fixed
More informationFeatures. TWIN-LOCK Boom pinning mechanism automatically pins the sections in position using two horizontal pins. EKS 5
Grove GMK7550 Product Guide Features 450 t (550 USt) capacity. m (197 ft) five-section boom. 25 m - 79 m (82 ft - 259 ft) lattice luffing jib t (264,500 lb) counterweight with hydraulic installation/removal
More information28' 6" (8700) 17' 6" (5340) 11' (3360) Ra 37' 1" (11 310) R 39' 8" (12 110) 16' 3" (4960) 28' 6" (8700) 64' 7" (19 680) 50' 9" (15 460)
Dimensions 17' 6" (5340) 28' 6" (8700) 11' (3360) 9' (2740) R 39' 8" (12 110) Ra 37' 1" (11 310) R 20' 10" (6345) R 18' 4" (5580) R 15' 9" (4800) 10' (3070) 14' 5" (4400) 19' 8" (6000) 27' 11" (8500) R
More informationALL TERRAIN HYDRAULIC CRANE
913.321.0127 ALL TERRAIN HYDRAULIC CRANE Dimensions 26' 7" (8 100) R 37' 2" (11 325) Ra 34' (10 350) R 35' 4" (10 775) Ra 32' 5" (9 875) 18' 3" (5 570) 8' 4" (2 530) R 26' 11" (8 200) Ra 24' (7 325) 42'
More informationALL TERRAIN HYDRAULIC CRANE
ALL TERRAIN HYDRAULIC CRANE Dimensions 17'6" (5340) 28'6" (8700) 11' (3360) R 48'11" (14920) Ra 43'10" (13360) R 38' (11580) Ra 34'9" (10590) R 37'6" (11440) Ra 35' (10680) R 16'5" (4995) R 14' (4270)
More information21' (6400) 4' 10" (1474) 9' 7" (2921) 20' (6096) WHEELBASE 40' 9" (12 421) C ROTATION. Note: ( ) Reference dimensions in mm
TM9 Dimensions 14' 7" (4448) TAILSWING 27' 6-1/2" (8395) 17' 5" (58) O/R MID EXTENSION 10' 11-1/2" (33) 25' (7620) 21' (60) 2' 7-3/4" (6) ' 5-1/4" (15 373) 7' 3-5/8" (2226) 12' 11-1/4" (3943) 16 13 5'
More informationTMS9000E Product Guide
TMS9000E Product Guide Features 90 t (110 USt) capacity 11,2 m - 43,4 m (36 ft - 142 ft) five-section full power boom Patented TWIN-LOCK boom pinning system 10 m - 17 m (33 ft - 56 ft) bi-fold lattice
More informationTMS500E. product guide. contents. features 40 ton (40 mt) Capacity. Truck Mounted Crane
product guide features ton ( mt) Capacity 29 ft.-95 ft. (8.8-29 m) 4 section, full power synchronized boom 26 ft.- ft. (7.9-13.7 m) offsettable telescopic swingaway extension Optional 8,4 lb. (3837 kg)
More information16'1" (4892) R 42'8" (13000) Ra 35'1" (10700) R 23'2" (7050) 15'1" (4609) 47' 6" (14468) 42' (12800) 6" (150) 5'5" (1650) 4'1" (1250) 6'7" (2000)
Dimensions R 47'7" (14500) Ra 39'8" (12100) R 45'7" (13900) 25'7" (7800) Ra 38'6" (11725) 16'1" (4892) 9'6" (2908) R 33'10" (10300) Ra 29'3" (8975) R 13'10" (4220) 10' (3070) 16'9" (5100) 9' (2750) 13'11"
More informationProduct Guide. Features
Grove RT5E-2 Product Guide Features Features Boom shape The RT5E-2 incorporates a rectangular boom shape made from 100 k.s.i. steel which eliminates weight and maximizes structural capacities. Tip height
More information41' 1-3/4" (12 543) 1' 9" (533) 15' (4572) 2' 7-1/2" (800) 1' 3-1/4" (387) 1' 6-1/4" (464) 6' 1" (1854) 12' 6" (3810) WHEELBASE 11' 1-1/2" (3391)
Dimensions 11' (33) 13' 4" (64) TAILSWING 9' 10" (2997) OVER FENDERS 22' (66) FULL EXT 15' 9" (4801) MID EXT 9' 3-1/2" (2832) RET 9' 9-1/2" (2985) O/R 11" (282) 34' 1-1/2" (10 3) RET 105' (32 006) EXT
More informationAll Terrain crane 300 tons
All Terrain crane 300 tons Grove gmk6300b BOOM LENGTHS: 51 to 197 ft JIB LENGTHS: 36 to 200 ft JIB OFFSETS: luffing Dimensions 17' 6" (5340) 28' 6" (80) 11' (3360) 9' (2740) R 39' 8" (12 ) Ra 37' 1" (11
More informationDimensions RT750. Note: ( ) Reference dimensions in mm 10' 10-1/2" (3314) 10' 5" (3175) 23' 4" (7112) 17' 4" (5283) 13' 8" (4166) 22' 11" (6985)
Dimensions 10' 10-1/2" (3314) 23' 4" (7112) 17' 4" (5283) 10' 5" (3175) 13' 8" (4166) 22' 11" (6985) 43' 7" (13 284) 5' 9" (1753) 13' 5-1/2" (4104) C ROTATION L 2' 8" (813) 17' 6-1/4" (5342) BOOM OVERHANG
More information30' 3-3/8" (9229) RETRACTED 78' (23 796) EXTENDED 10' 11-7/8" (3349) 6' 3" (1905) 1' 11" (587) Note: ( ) Reference dimensions in mm
Dimensions 11' 1-3/8" (3387) TAILSWING 8' 5 1/2" (78) 8' 2" (2489) 18' 6" (5639) EXT 13' (3962) MID EXT 7' 6-3/4" () RET ' 3-3/8" (9229) RETRACTED 78' (23 796) EXTENDED ' 11-7/8" (3349) 6' 3" (1905) 1'
More informationRT880E. product guide. contents
sales@reliablecraneservice.com 2-525-8 or 2--2516 product guide contents Features 2 Specifications 3 Dimensions 5 Working Range 6 Bifold Load Charts 7 features ton (75 mt) capacity 41 ft-128 ft (12.6 m-39.
More information24' 11" (7595) 44' 5" (13 557) 7' 3" (2210) 13' 4" (4064) 2' 1" (635) 12' 8" (3861) 1' 8" (508) 28' 3" (8611) Note: ( ) Reference dimensions in mm
Dimensions TAILSWING 14' (4280) 24' (7315) 10' 10-1/2" (3315) TRACK 8' 2-1/2" (2502) 26' (7925) 24' 11" (7595) 11-3/4" (298) 44' 5" (13 557) 7' 3" (2210) 12' 8-3/8" (3870) 20 1' 2-3/8" (365) 2' 1" (6)
More informationGrove RT880E. Product Guide. Features
Grove RT880E Product Guide Features 75 t (80 USt) capacity 12,6 m - 39,0 m (41 ft - 128 ft) four-section, full power boom 10,0 m - 17,0 m (33 ft - 56 ft) offsettable lattice swingaway extension 6,1 m (20
More informationGrove RT890E. Introduced: Capacity: 90 US (80 Metric) Tons
Grove E Introduced: 2003 Capacity: 90 US (80 Metric) Tons Dimensions OAL: 45 FT. 3 IN. (13.8M) CHASSIS LENGTH: 28 FT. 0 IN. (8.5M) OAW: 10 FT. 11 IN. (3.3M) OAH: 12 FT. 4 IN. (3.7M) Boom Standard 5 section
More information25' (3407) 7' 9-3/4" (7620) 8' 8-1/2" (2654) (4064) (597) 1' 11-1/2" 1' 2" (356) 3' 4" (1016) 10' 1" (3073) WHEELBASE 10' 5" (3175) C ROTATION
Dimensions ' (76) 11' 2" (37) TAILSWING ' (76) 11' 2" (37) 7' 9-3/4" TAILSWING (2432) OVER FENDERS TURNING RADIUS - (2 Wheel Steer) 29' 6" (9029) (4 Wheel Steer) ' 3" (6166) 7' 9-3/4" (2432) OVER FENDERS
More informationGrove YB Product Guide. Features. ASME B30.5 Imperial 85%, Metric 85%, DIN/ISO. 13,6 t (15 USt) capacity
Grove YB5515-2 Product Guide ASME B3.5 Imperial 85%, Metric 85%, DIN/ISO Features 13,6 t (15 USt) capacity 12,5 m (41 ft) three-section, full-power synchronized boom 9,1 t (1 USt) deck carrying capacity
More informationROUGH TERRAIN HYDRAULIC CRANE
ROUGH TERRAIN HYDRAULIC CRANE Dimensions 47' 1" (143 mm) 13' 0.50" (3975 mm) 1' 6.94" (481 mm) 21 DEGREES 19 DEGREES 18' 11.75" (5785 mm) 12' 8.00" (3861 mm) 13' 4.00" (64 mm) 28' 3.00" (8611 mm) 12' 3.00"
More information43' 4" (13 208) OVERALL 19' 8-1/2" (6007) 19' 2" (5842) 21' 10" (6655) Note: ( ) Reference dimensions in mm ATS WHEEL STEERING
ATS5 ATS5 Dimensions PRELIMINARY 8' (2438) TAILSWING 11' 1" (3383) 7' 8" (2337) RET 13' 9-3/4" (4210) MID EXT ' (96) EXT 16-3/4" (425) 43' 4" (13 8) OVERALL 10' 10" (32) 7' 1" (2159) 21" (533) 19 4' (1219)
More informationTAILSWING 14' 1-1/2" (4305) 22' 11" (6985) 29.5 x 25 8' 2-1/2" (2502) 12' 5" (3785) 12' 9" (3886) 1' 6-1/2" (470)
View View thousands thousands of of Crane Crane Specifications Specifications on on FreeCraneSpecs.com FreeCraneSpecs.com Dimensions 25' (7620) TAILSWING 14' 1-1/2" (4305) A OAW 10' 11" (3327) 23' (10)
More informationTIRE SIZE x x 25 A (TRACK) 6 5-1/2 (1969) 6 9-1/8 (2061) B (OAW) 8 (2438) 8 9 (2667) GROUND CLEARANCE 1 7-1/8 (486)
Dimensions 10' 3-1/8" (3127) TAILSWING A B 20' 4-1/2" (6210) 19' (5791) EXT 13' 6" (4115) MID EXT 7' 6" (2286) RET 18' 8-3/8" (59) TIRE SIZE 16.00 x 25 20.5 x 25 A (TRACK) 6 5-1/2 (1969) 6 9-1/8 (2061)
More informationRT530E-2 Product Guide
RT530E-2 Product Guide ASME B30.5 Imperial 85% Features 30 t (30 USt) capacity 8,8 m 29 m (29 ft 95 ft) four-section fullpower boom 7,9 m 13,7 m (26 ft 45 ft) offsettable telescopic swingaway extension
More informationGrove GMK6400 North American Product Guide
Grove GMK6400 North American Product Guide ASME B30.5 Imperial 85% Features 400 t (450 USt) rating 15,4 m - 60 m (51 ft - 197 ft) five-section boom 25 m - 79 m (82 ft - 259 ft) luffing jib Self-rigging
More information24' 11" (7595) 16' 6-1/2" (5042) 2' 1" (635) 1' 8" (155) 12' 8" (3861) Note: ( ) Reference dimensions in mm. Turning Radius...
Dimensions 26' 6-1/2" (8090) 24' (7315) EXT 17' 4" (5283) MID EXT ' 4" (31) RET 14' 1/2" (4280) TAILSWING ' 11-1/2" (33) OVER FENDERS 9' (2743) 24' 11" (7595) 11-3/4" (298) 47' 3/4" (14 3) 39' 7" (12 065)
More information24' (7315) 10' 10-1/2" (3315) 24' 11" (7595) 3' 7" (1310) 1' 2-3/8" (365) 2' 1" (635) 1' 8" (508) 12' 8" (3861) 28' 3" (8611)
Dimensions TAILSWING 14' (4280) 24' (7315) 10' 10-1/2" (3315) TRACK 8' 4-1/2" (2553) 26' 6-1/2" (8090) 24' 11" (7595) 3' 7" (1310) 1' 3" (381) 7' 3" (2210) 13' 1/2" (3975) 21 1' 2-3/8" (365) 2' 1" (6)
More information24' 11" (7595) 44' 5" (13 557) 7' 3" (2210) 13' 4" (4064) 12' 8" (3861) 28' 3" (8611) Note: ( ) Reference dimensions in mm
Dimensions 14' (4280) TAILSWING 24' (7315) ' 4" (31) TRACK 8' 2-1/2" (22) ' -1/2" (3315) 26' (7925) 17' 4" (5283) 24' 11" (95) 11-3/4" (298) 44' 5" (13 557) 7' 3" (22) 12' 8-3/8" (3870) 20 1' 2-3/8" (3)
More informationGrove RT880E. Product Guide. Features. View thousands of Crane Specifications on FreeCraneSpecs.com
Grove RT880E Product Guide Features 75 t (80 USt) capacity 12,6 m - 39,0 m (41 ft - 128 ft) four-section, full power boom 10,0 m - 17,0 m (33 ft - 56 ft) offsettable lattice swingaway extension 6,1 m (20
More information13' 4" (4064) TAILSWING 30' 11" (9423) 41' 10-1/2" (12 764) 7' (2134) TURNING RADIUS w/16" Tires COORDINATED STEER 24' 11" (7595)
Dimensions 20' (6096) 13' 10" (4216) 13' 4" (4064) TAILSWING 8' 5-1/2" (2578) 22' (6706) 30' 11" (9423) FRONT STEER 41' 8" (12 700) TURNING RADIUS w/16" Tires COORDINATED STEER 24' 11" (7595) FRONT STEER
More informationSRC885. Product Guide. Rough Terrain Crane. 85 U.S. Tons (75 Metric 10 ft Radius 148 ft Max Tip Height (Main Boom) 52.5 ft Boom Extension
SRC885 Rough Terrain Crane 85 U.S. Tons (75 Metric Tons) @ 10 ft Radius 148 ft Max Tip Height (Main Boom) 52.5 ft Boom Extension Product Guide 2 SRC885 MOBILE LIFTING POWER WHERE YOU NEED IT SANY America
More informationSRC885. Product Guide. Rough Terrain Crane. View thousands of Crane Specifications on FreeCraneSpecs.com
SRC885 Rough Terrain Crane 85 U.S. Tons (75 Metric Tons) @ 10 ft Radius 148 ft Max Tip Height (Main Boom) 52.5 ft Boom Extension Product Guide 2 SRC885 MOBILE LIFTING POWER WHERE YOU NEED IT SANY America
More informationView thousands of Crane Specifications on FreeCraneSpecs.com GMK6220. All Terrain Hydraulic Crane
All Terrain Hydraulic Crane Dimensions 17 6 (5340) 28 6 (8700) 11 (3360) 3 2 (960) R 38 (11580) Ra 34 9 (10590) R 37 6 (11440) Ra 35 (10680) R 16 5 (4995) R 14 (4270) 9 (2740) 10 (3070) 16 1 (4900) 19
More informationROUGH TERRAIN HYDRAULIC CRANE
ROUGH TERRAIN HYDRAULIC CRANE Dimensions 44' 1.83" (13458 mm) C L ROTATION 11' 10.88" (3629 mm) 1' 7.49" (195 mm) 1' 5.69" (449 mm) 22 DEGREES 11.05" (281 mm) 10' 10.32" (54444 mm) 11' 3.12" (3432 mm)
More informationGrove RT880E. Product Guide. Features
Grove RT880E Product Guide Features 75 t (80 USt) capacity 12,6 m - 39,0 m (41 ft - 128 ft) four-section, full power boom 10,0 m - 17,0 m (33 ft - 56 ft) offsettable lattice swingaway extension 6,1 m (20
More informationGrove TMS9000E Product Guide
Grove TMS9000E Product Guide Features 90 t (110 USt) capacity 11,2 m - 43,3 m (36 ft - 142 ft) five-section full power boom Patented TWIN-LOCK boom pinning system 10 m - 17 m (33 ft - 56 ft) bi-fold lattice
More informationCM20. Courtesy of Crane.Market
Dimensions ( Rubber Tracks) 11' 2-1/4" (37) TAILSWING 25' (7620) 8' 6" (2591) RET 2' 3-5/8" (0) 7' 10-1/2" (20) 14' 6" (4420) EXT 1' 3-1/4" (387) ' 1/4" (9154) RETRACTED 78' 3/4" (23 797) EXTENDED 35'
More informationRough Terrain Crane. 65 U.S. Tons (59 Metric 10 ft Radius ft, 5 Section Main Boom 30.2 ft 52.5 ft Boom Extension.
SRC865XL Rough Terrain Crane 65 U.S. Tons (59 Metric Tons) @ 10 ft Radius 139.4 ft, 5 Section Main Boom 30.2 ft 52.5 ft Boom Extension Product Guide key FEATURES OPERATOR S CAB Spacious ergonomic cab with
More informationGrove TM500E-2. Product Guide. Features. 40 t (45 USt) capacity. 8,8 m 29 m (29 ft 95 ft) 4 section, full power boom
Grove TM500E-2 Product Guide Features 40 t (45 USt) capacity 8,8 m 29 m (29 ft 95 ft) 4 section, full power boom 9,8 m 31 m (32 ft 102 ft) 4 section, full power boom 7,9 m 13.7 m (26 ft 45 ft) offsettable
More informationGRT8100 Product Guide
GRT8100 Product Guide ASME B30.5 Imperial 85% Features 90 t (100 USt) capacity 12 m 47 m (39.2 ft 154.3 ft) five-section full-power boom 10 m 17 m (33 ft 56 ft) manual offsettable bi-fold lattice swingaway
More informationGrove RT540E. Product Guide. Features. 35 t (40 USt) capacity. 9,8 m 31 m (32 ft 102 ft) 4-section full power boom
Grove RT5E Product Guide Features t ( USt) capacity 9,8 m 31 m (32 ft 102 ft) 4-section full power boom 7,9 m 13,7 m (26 ft ft) offsettable telescopic swingaway extension Dual-axis electric joystick controllers
More informationCranes. Truck Crane Features T340-1/T340-1XL
Truck Crane Features T340-1/T340-1XL Cranes FEATURES 30-40 tons (27-36 mt) maximum lifting capacity 94' (28.6 m) or 105' (32.0 m) maximum boom length 147' (44.8 m) or 158' (48.1 m) maximum tip height Four-section
More informationFeatures. Engine. MegaDrive A mixture of conventional drive at the front and hybrid drive for slow speed. Additional features
Grove GMK6400 North American Product Guide ASME B30.5 Imperial 85% Features 400 t (450 USt) rating 15,4 m - 60 m (51 ft - 197 ft) five-section boom 25 m - 79 m (82 ft - 259 ft) luffing jib Self-rigging
More informationGrove RT700E. Product Guide. Features. 50 t - 55 t (50 USt - 60 USt) capacity. 11 m 33,5 m (36 ft 110 ft) four-section full power boom
Grove RT700E Product Guide Features 50 t - 55 t (50 USt - 60 USt) capacity 11 m 33,5 m (36 ft 110 ft) four-section full power boom 10,1 m (33 ft) offsettable lattice swingaway extension 10,1 m - 17,1 m
More informationGMK Product Guide
GMK5180-1 Product Guide ANSI B30.5 Imperial 85% Features 180 t (210 USt) capacity 64 m (210 ft) six-section main boom 11 m (59.1 ft) swingaway with jib and/or boom inserts. Maximum 34 m (111.6 ft) length
More informationTM500E-2. product guide. load handling. contents. features 45 ton (40 mt) Capacity. 29 ft.-95 ft. ( m) 4 section, full power boom.
load handling product guide 1 features ton ( mt) Capacity 29 ft.-95 ft. (8.8-29 m) 4 section, full power boom 32 ft.-102 ft. (9.8-31 m) 4 section, full power boom 26 ft.- ft. (7.6-13.7 m) offsettable telescopic
More informationDimensions. Model GMK 5150B equipped with:
Dimensions 50' 4" (15 350) 42' 11-1/2" (13 100) 28' 1" (8575) 48' 7" (14 800) 41' 4 (12 600) 18' 1" (5424) 10' 4" (3151) 9' (2750) 45' 4" *37' 9" (13 800) (11 500) 13' 11" (4255) 24' 7" (7500) *18' 8"
More information28' 6" (8700) 17' 6" (5340) Ra 37' 1" (11 310) R 39' 8" (12 110) R 38' 10" (11 850) Ra 35' 6" (10 840) R 22' 10" (6950) Ra 17' 7" (5355)
Dimensions 17' 6" (5340) 28' 6" (8700) 11' (3360) 9' (2740) R 39' 8" (12 ) Ra 37' 1" (11 310) R 20' 10" (6345) R 18' 4" (55) R 15' 9" (40) 9' 9" (29) 14' 5" (4400) 19' 8" (6000) 27' 11" (8500) R 47' 2"
More informationGrove RT540E. Product Guide. Features. 35 t (40 USt) capacity. 9,8 m 31 m (32 ft 102 ft) four-section full power boom
Grove RT5E Product Guide Features t ( USt) capacity 9,8 m 31 m (32 ft 102 ft) four-section full power boom 7,9 m 13,7 m (26 ft ft) offsettable telescopic swingaway extension Dual-axis electric joystick
More information20 Ton Cherry Picker. Grove RT58D with Hi Rail Running Gear Load Charts & Specs
Ton Cherry Picker Grove with Hi Rail Running Gear Load Charts & Specs Dimensions 15' 11" (4851) I A C 14' 6" (44) 18' 3" (63) A B C D E F G H I TIRE SIZE (TRACK) (O.A.H) (O.A.W) (60' BOOM) (70' BOOM)
More informationGMK5150 Product Guide
GMK5150 Product Guide ASME B30.5 Imperial 85% Features 150 t (175 USt) capacity 50,8 m (167 ft) five-section boom 11,2 m (36 ft) / 17,8 m (58 ft) bi-fold swingaway Two 8 m (26 ft) boom extensions and one
More information45 7 (13.89 m) (2.02 m) (1.68 m) 25 (0.65 m) (0.34 m) 11 0 (3.35 m) 19 3 (5.86 m) (8.17 m) 1 8 (0.50 m)
Specifications Telescopic Boom Truck Crane HTC 8670 70 ton (63.5 metric tons) 38 0 (11.58 m) 45 7 (13.89 m) 11 6.88 (3.52 m) Link Be HTC 8670 10 8.88 (3.71 m) 6 7.69 (2.02 m) 5 6.25 (1.68 m) 17 17 4.5
More informationROUGH TERRAIN CRANE DIMENSIONS
GR-1600XL 160 Ton Capacity (145 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS Note : Dimension is with boom angle at -1.5 degree. GENERAL DIMENSIONS (26.5 R25 Tires) Feet Meters Turning radius
More informationGrove RT600E. Product Guide. Features. 10 m - 32 m (33 ft ft) four-section full power boom
Grove RT600E Product Guide Features 10 m - 32 m (33 ft - 105 ft) four-section full power boom 8,8 m 15,5 m (29 ft 51 ft) telescopic swingaway extension Maximum main boom tip height of 34 m (112 ft) Maximum
More informationGrove RT9150E. Provisional Product Guide
Grove RT9150E Provisional Product Guide Features 135 t (150 USt) capacity 12,9 m - 60,0 m (42 ft - 197 ft) six-section, full power boom 11 m -18 m (36 ft - 59 ft) offsettable bi-fold swingaway extension
More informationGrove RT600E. Product Guide. Features. View thousands of Crane Specifications on FreeCraneSpecs.com
Grove RT600E Product Guide Features 10 m - 32 m (33 ft - 105 ft) four-section full power boom 8,8 m 15,5 m (29 ft 51 ft) telescopic swingaway extension Maximum main boom tip height of 34 m (112 ft) Maximum
More information