Cranes. Truck Crane Features T340-1/T340-1XL

Transcription

1 Truck Crane Features T340-1/T340-1XL Cranes FEATURES tons (27-36 mt) maximum lifting capacity 94' (28.6 m) or 105' (32.0 m) maximum boom length 147' (44.8 m) or 158' (48.1 m) maximum tip height Four-section full power, mechanically synchronized boom with single lever control Swingaway jib offsettable 0, 15 or 30 Two-speed main and auxiliary winches Quick-reeving boom head and hook block Fully independent multi-position out and down outriggers Environmental operator s cab optimized load visibility and productivity Electro-Proportional Joystick Controls RCI 510 load system Rated Capacity Indicator Travel speed to 60 mph (96 km/h) Easy to read load chart, books include range diagrams 12 month or 2,000 hours warranty, major weldments are 5 years or 10,000 hours

2 T340-1/T340-1XL T340-1 & T340-1 XL TRUCK CRANES T330-1 T330-1XL 30 tons (27 mt) T335-1 T335-1XL 35 tons (32 mt) T340-1 T340-1XL 40 tons (36 mt) FEATURES 94 (28.6 m) or 105 (32 m) Four-section, full power mechanically synchronized boom with single pedal control High strength, four plate construction welded inside and out with embossed side plate holes to reduce weight and increase strength. Single boom hoist cylinder provides boom elevation of -4 to 77 for easier reeving changes and close radius operation. Quick-reeving boom head; no need to remove wedge form socket. 360 house lock standard. ENVIRONMENTAL OPERATOR S CAB Rated Capacity Indicator (RCI) system including anti-two block system with automatic function disconnects. Deluxe six-way adjustable high back operator s seat has torsion bar suspension and adjustable arm rests. Sound and weather insulated for comfort. Removable front window, hinged tinted glass skylight, and sliding right-hand window. Armrest mounted dual axis controls for winch(s), swing, and boom elevation; foot control pedals for swing brake, boom telescope, and throttle. Complete instrumentation. Environmentally-sealed rocker switches. Circuit breakers in cab. RUGGED, EASY TO MANEUVER CARRIER Chassis is Terex designed and built with 6 x 4 drive. Full aluminum decking improves access and reduces weight. Manual transmission with 10 speeds forward, 3 reverse, and neutral safety start standard. Full air brakes on all wheels with split circuit system. Fully independent hydraulic outriggers may be utilized fully extended to 20 ft (6.10 m), in their extended position, or fully retracted. Standard Cummins ISC-300 diesel engine. Front and rear air ride suspension, aluminum rims and tachometer standard. POWERFUL, TWO-SPEED WINCHES 484 fpm (147 m/min) maximum line speed, 15,639 lbs ( kg) maximum line pull. Single lever control. Integral automatic brake. Electronic drum indicators. Winch drum rollers, tapered drum flanges. HIGH CAPACITY, DEPENDABLE HYDRAULIC SYSTEM Three gear pumps driven form engine flywheel housing PTO. Combined system capability is 115 gpm (435 lpm). Hydraulic reservoir with 91 gal (344 l) capacity and full flow oil filtration system. OPTIONS INCLUDE 105 (24.7 m) main boom 32 or 32 to 49 (9.75 to m) swing-on jib. Both offset 0, 15, or 30 Auxiliary winch with rope Heater/defroster, air conditioner for operator s cab Air conditioner for carrier cab Heavy counterweight package Cold weather kit for carrier cab Six speed Allison Automatic transmission with Cummins ISC-300 diesel engine TEREX Cranes th Street S.E. Waverly, Iowa USA TEL (319) FAX (319) inquire@terexwaverly.com WEB terex.com WE RESERVE THE RIGHT TO AMEND THESE SPECIFICATIONS AT ANY TIME WITHOUT NOTICE. THE ONLY WARRANTY APPLICABLE IS OUR STANDARD WRITTEN WARRANTY APPLICABLE TO THE PARTICULAR PRODUCT AND SALE. WE MAKE NO OTHER WARRANTY, EXPRESSED OR IMPLIED. TEREX CRANES, INC 2005 PRINTED IN U.S.A DECEMBER 5, 2005 P/N: T3001SF122005

3 Truck Crane Specifications T340-1/T340-1XL Series Cranes STANDARD BOOM EQUIPMENT BOOM 30-94' ( m), four section full power, mechanically synchronized boom. High-strength four plate construction with embossed side plate holes to reduce weight and increase strength. Anti-friction slide pads. A single boom hoist cylinder provides for boom elevation of -4 to 77. Maximum tip height is 99' (30.17 m) BOOM HEAD Welded to outer section of boom. Four or five non metallic load sheaves and two metallic idler sheaves mounted on heavy duty, antifriction bearings. Quick reeving boom head. Provisions made for side-stow jib mounting. OPTIONAL BOOM EQUIPMENT MAIN BOOM ' ( m) four section full power mechanically synchronized boom. Extra high-strength four plate construction with embossed side plate holes. Anti-friction slide pads. A singe boom hoist cylinder provides boom elevation of -4 to 88 degrees. Maximum tip height is 110' (33.5 m). JIBS 32' (9.75 m) side stow swing-on one-piece lattice type jib. Single sheave mounted on anti-friction bearing. Jib is offettable at 0, 15 or 30. Maximum tip height is 129' (39.32 m) with 94' (28.49 m) boom, 140' with 105' (32.0 m) boom ' ( m) sidestow swing-on lattice type jib. Single sheave mounted on anti-friction bearing. Jib is extendible to 49' (14.86 m) by means of a 17' (5.18 m) manual pull-out tip section, roller supported for ease of extension. Jib is offsettable at 0, 15 or 30. Maximum tip height is 147' (44.81 m) with 94' (28.49 m) boom, 158' with 105' (32.0 m) boom. AUXILIARY BOOM HEAD Removable auxiliary boom head has single sheave mounted on antifriction bearing. Removable pin-type rope guard for quick reeving. Installs on main boom peak only. Removal is not required for jib use. HOOK BLOCK Three or four metallic sheaves on anti-friction bearings with hook and heavy duty hook latch. Quick reeving design does not require removal of wedge and socket from rope. HOOK AND BALL 7 ton (6.3 mt) top swivel ball with hook and hook latch ( m), three section full power, mechanically synchronized boom. High-strength four plate construction with embossed side plate holes to reduce weight and increase strength. Anti-friction slide pads. A single boom hoist cylinder provides for boom elevation of -4 to 77 degrees. Maximum tip height is 87 (26.53 m).

4 T340-1/T340-1 XL STANDARD UPPERSTRUCTURE EQUIPMENT UPPERSTRUCTURE FRAME All welded one-piece structure fabricated with high tensile strength alloy steel. Counterweight is bolted to frame. TURNTABLE CONNECTION Swing bearing is a single row, ball type, with external tooth. The swing bearing is bolted to the revolving upperstructure and to the carrier frame. SWING A hydraulic motor drives a double planetary reduction gear for precise and smooth swing function. Swing speed (no load) is 2.8 rpm. SWING BRAKE Heavy duty multiple disc swing brake is mechanically actuated from operator s cab by foot pedal. Brake may be locked on or used as a momentary brake. RATED CAPACITY INDICATOR Rated Capacity Indicator with visual and audible warning system and automatic function disconnect. Second generation pictographic display includes: boom radius, boom angle, boom length, allowable load, actual load, and percentage of allowable load registered by bar graph. Operator settable alarms provided for swing angle, boom length, boom angle, tip height and work area exclusion zone. Anti-two block system includes audio/visual warning and automatic function disconnects. OPERATOR S CAB Environmental cab with all steel construction, optimum visibility, tinted safety glass throughout, and rubber floor matting is mounted on vibration absorbing pads. The cab has a sliding door on the left side; framed sliding window on the right side, hinged tinted all glass skylight and removable front windshield to provide optimum visibility of the load open or closed. Acoustical foam padding insulates against sound and weather. The deluxe six-way adjustable operator s seat is equipped with a mechanical suspension and includes head and arm rests. CONTROLS Armrest mounted dual axis controls for winch(s), swing and boom elevation. Winch rotation indication incorporated into control handles. Armrest swings up to improve access and egress. Vernier adjustable hand throttle included. Switches include ignition, engine stop, lights, horn, windshield wipers, defroster, outriggers, 360 house lock, etc. Horn and winch speed shift switches are mounted in the levers. Foot control pedals include swing brake, boom telescope, and throttle. INSTRUMENTS AND ACCESSORIES In-cab gauges include bubble level, engine oil pressure, fuel, engine temperature, voltmeter. Indicators include high coolant temperature/low engine oil pressure audio visual warning, low coolant level audio visual warning, and Rated Capacity Indicator. Accessories include fire extinguisher, windshield washer/wiper, skylight wiper, left & right hand rear view mirrors, dash and dome lights, and seat belt. Circuit breakers protect electrical circuits. HYDRAULIC CONTROL VALVES Valves are mounted on the rear of the upperstructure and are easily accessible. Valves utilize electric over hydraulic operators and include one pressure compensated load sensing two spool valve for boom elevation and telescope, one pressure compensated load sensing two spool valve for main and auxiliary winch, and one single spool valve for swing. System provides for simultaneous operation of all crane functions. High pressure regeneration feature provides two-speed boom extension. Quick disconnects are provided for ease of installation of pressure check gauges. OPTIONAL EQUIPMENT Auxiliary Winch LP Heater/Defroster Hydraulically Powered Air Conditioner Diesel Heater/Defroster Tachometer Work Lights Heavy Counterweight Package(s) STANDARD CARRIER EQUIPMENT CARRIER CHASSIS Chassis is Terex designed and built with a 6 x 4 drive. Triple box construction frame is fabricated from high strength alloy steel and provides superior frame rigidity. Full aluminum decking improves access and reduces weight. Aluminum engine housing with sliding cover optimizes engine access while reducing weight and improving corrosion resistance. AXLES AND SUSPENSION Rear Axle 45,000 lb ( kg) capacity tandem axles with heat treated housings have interaxle differential with lockout. Axles are mounted on standard air suspension, over equalizer beams with shock absorbers to distribute weight evenly. Front Axle 22,000 lb (9 979 kg) I beam type axle with air suspension and shock absorbers for exceptional ride. TIRES Front: Two 425/65R P.R. All-Position type tubeless. Rear: Eight 11R P.R. transport type. BRAKES Full air brakes on all wheels with ABS split circuit system. Front brakes: 16.5 x 6" (419 x 152 mm) Rear brakes: 16.5 x 7" (419 x 178 mm). All brakes are air operated S cam type with automatic slack adjusters. Lining areas are 384 in 2 (2477 cm 2 ) front and 920 in 2 (5935 cm 2 ) rear. Air compressor has standard air dryer. Rear tandem axles have springset, air released parking or emergency brake chambers. Parking brake is applied with valve mounted on dash panel. Emergency brakes apply automatically when air pressure drops below 60 psi (4.2 kg/cm 2 ). STEERING Mechanism includes rack and pinion with integral hydraulic power. Turning radius: To C L of tires: 34' (10.35 m) To corner of carrier: 37' 7" (11.46 m) TRANSMISSION Standard: Fuller RT 8908LL transmission has 10 speeds forward and three reverse, with neutral safety start. Gear selection s accomplished by single level shift control and two position air shift range selector. Optional: Allison 3500RDS provides six speeds forward with lock-up in top five gears. Adaptive feed back controls continually optimize shifts for weight, terrain, etc. MULTI-POSITION OUT & DOWN OUTRIGGERS Fully independent hydraulic outriggers may be utilized fully extended to 20' (6.10 m) in their 1/2 extended position, or fully retracted. Removable aluminum outrigger pads are 452 in 2 (2919 cm 2 ) and stow on the carrier frame. Complete controls and sight leveling bubble are located in the operator s cab. Includes 5th, front, outrigger.

5 T340-1/T340-1 XL STANDARD CARRIER EQUIPMENT (CONTINUED) CARRIER CAB One-man aluminum cab is mounted on vibration absorbing pads and has optimum visibility, safety glass, acoustical foam padding inside cab of insulating against sound and weather, hot air defroster, six-way adjustable air suspension seat with seat belt and arm rests, and a lockable door with roll down window. CONTROLS Included are transmission shift, inter-axle differential lock, cruise control, parking brake, two-speed windshield wiper/washer, heater and defroster, lights, headlight dimmer, dome light, and ignition switch. INSTRUMENTS Included are speedometer, hourmeter, tachometer, voltmeter, fuel gauge, engine oil pressure gauge, water temperature gauge, dual air pressure gages. Warning lights include low coolant level, parking brakes on, low air, pumps engaged, and high beam lights. ACCESSORIES Included are fire extinguisher, right hand and left hand rear view mirrors, electric horn, access steps and grab handles(located at four separate points around the crane), back-up alarm, two position boom rack, front and rear towing loops. LIGHTS Light package includes headlights with foot operated dimmer switch, clearance lights, tail lights, directional signal lights, four way hazard flasher lights, back-up lights with audible alarm. OPTIONAL EQUIPMENT Spare tire with wheel Immersion heater(s) Pintle hook Cold weather kit Allison 3500 RDS six-speed automatic transmission Rear air suspension Engine exhaust brake Air conditioner Aluminum R/L hand tool boxes Ground level outrigger controls. HYDRAULIC SYSTEM HYDRAULIC PUMPS Triple pump driven from engine flywheel housing PTO with air shifted mechanical pump disconnect at 1.15 times engine speed, w/manual or double and single pumps driven by hot-shift PTO s w/automatic. A separate steering pump is driven directly from the engine. Combined system capacity is gpm ( lpm). Hydraulic oil cooler is standard. Main Winch Pump 60.3 gpm ( ,500 psi (246.1 kg/cm 2 ) Boom Hoist and Telescope Pump 45.1 gpm ( ,500 psi (246.1 kg/cm 2 ) Outrigger and swing pump 22 gpm (83.3 2,500 psi (175 kg/cm 2 ) Power steering Pump 8 gpm ( psi (105.5 kg/cm 2 ) MAIN WINCH SPECIFICATIONS Hydraulic winch with bent axis piston motor and planetary reduction gearing provides two-speed operation with equal speeds for power up and down. Winch is equipped with an integral automatic brake, grooved drum, tapered flanges, standard cable roller on drum, and electronic rotation indicator. Performance LO-Range HI-Range Max line speed (no load) First layer 167 fpm (50.9 m/min) 335 fpm (102.1 m/min) Fifth layer 242 fpm (73.8 m/min) 484 fpm (147.5 m/min) Max. line pull-first layer 15,639 lb (7 093 kg) 7,298 lb (3 310 kg) Max. line pull-fifth layer 10,827 lb (4 911 kg) 5,052 lb (2291 kg) Permissible line pull 9,000 lb (4 082 kg) Drum Dimensions Drum Capacity 10.62" (270 mm) drum diameter Max. Storage: 570' (173.7 m) 17.55" (446 mm) length 6th layer not a working layer 18" (457 mm) flange dia. Max. useable: 455' (138.7 m)* Cable: 5/8" x 450' (16 mm x m) Cable type: 5/8" (16 mm) 6 x 19 IWRC IPS Right regular lay, preformed. Min. Breaking strength 17.9 tons (16.2 mt) *Based on minimum flange height above top layer to comply with ANSI B30.5 OPTIONAL AUXILIARY WINCH Hydraulic two-speed winch with bent axis piston motor, equal speed power up and down, planetary reduction with integral automatic brake, grooved drum with tapered flanges, drum roller, and rotation indicator. Performance Max. line speed (no load) Fifth layer 484 fpm (147.5 m/min) Max. line pull First layer 15,639 lbs (7 093 kg) Drum Dimensions and Capacity (Same as main winch) FILTRATION Full flow oil filtration system with bypass protection includes a removable 60 mesh (250 micron) suction screen-type filter and five micron replaceable return line filter. HYDRAULIC RESERVOIR All welded construction with internal baffles and diffuser. Provides easy access to filters and is equipped with an external sight level gauge. The hydraulic tank is pressurized to aid in keeping out contaminants and in reducing potential pump cavitation. Capacity is 91 gal (344 L). OPTIONAL HOIST LINE Main winch and optional auxiliary winch 5/8" (16 mm) rotation resistant compacted strand 18 x 19 or 19 x 19. Min. breaking strength 22.5 tons (20.6 mt). ENGINE SPECIFICATIONS Make and Model, Cummins ISC 300 (300 hp) Type 6 cylinder Bore and Stroke 4.49 x 5.32" (114 x 135 mm) Displacement in 3 (8.27 L) Max. Gross Horsepower 300 hp ( rpm Max. Gross Torque 860 lb/ft (1166 N m)/1300 rpm Net Horsepower 242 hp ( rpm Aspiration Turbocharged Electrical System 12 volt Alternator 100 amp Battery (2) 12V F (-18 C) Fuel Capacity 60 gal (227 L) SPEED AND GRADEABILITY Engine Transmission Speed Range Gradeability Cummins Manual 60 mph (96 km/h) 56% Cummins Automatic 60 mph (96 km/h) 64% Performance data is based on a gross vehicle weight of 58,000 lb ( kg). Performance may vary due to engine performance, weight, tire size, etc. Gradeability data is theoretical and is limited by tire slip, vehicle stability, oil pan angle, and other factors.

6 GENERAL DIMENSIONS WEIGHTS & AXLE LOADS GROSS WEIGHT POUNDS UPPER IN TRAVEL POSITION FRONT REAR GROSS WEIGHT KG UPPER IN TRAVEL POSITION FRONT REAR T300 Crane with ISC 300 Engine, 94 (28.49m) Boom, 2, lb ( kg) Ctw. 1/4 Tank of Fuel, 425/65R PR Front + 47, , , and 11R PR Rear Tires, Aluminum Disc Wheels, an 200 lb (90.7 kg) operator in cab. T340XL Crane with ISC 300 Engine, 94 (28.49m) Boom, 2, lb ( kg) Ctw. 1/4 Tank of Fuel, 425/65R PR Front + 60, , , and 11R RP Rear Tires, Aluminum Disc Wheels, an 200 lb (90.7 kg) operator in cab. Add Options: 32 (9.68 m) Swing on Jib on 94 (28.49 m) Boom + 1, (9.68 m) Swing on Jib on 81 (24.83 m) Boom + 1, , (9.68 m) Swing on Jib on 105 (32 m) Boom + 1, , ( m) Swing on Jib 1, , at 94 (28.49 m) Boom ( m) Swing on Jib + 1, , at 81 (24.7 m) Boom ( m) Swing on Jib + 1, , at 105 (32 m) Boom Auxiliary Boom Head on 94 (28.49 m) Boom Auxiliary Boom Head on 81 (24.83 m) Boom Auxiliary Boom Head on 105 (32 m) Boom Full Tank of Fuel Auxiliary Winch W/Drum Roller and Wire Rope Heater/Defroster (Upper) Work Lights Sling Box Installed on Left Side of Carrier Sling Box Installed on Right Side of Carrier Pintle Hook (Rear) Electric Remote Control ton (36.3 mt) Quick Reeving Hook Block (On Bumper - 4 Sheave) 7 ton (6.3 mt) Hook and Ball (At Bottom Rack) Substitute: ( m) Boom w/ 3,100 lb (1,406 kg) Upper Cwt. & 500 lb (227 kg) F. Bumper 7,200 lb Upper Cwt. w/1,850 F. Bumper (94 Boom) + 6, , ,200 lb Upper Cwt. w/1,850 F. Bumper (81 Boom) + 5, , Aux. Winch W/Drum Roller for Heavy Cwt. (above) Metallic Boom Head Sheaves Spin Resistant Wire Rope (per winch) Automatic Transmission W/2-speed axles Automatic Transmission W/2-speed aux trans. & 2-speed axles TEREX Cranes th Street S.E. Waverly, Iowa USA TEL (319) FAX (319) inquire@terexwaverly.com WEB terex.com WE RESERVE THE RIGHT TO AMEND THESE SPECIFICATIONS AT ANY TIME WITHOUT NOTICE. THE ONLY WARRANTY APPLICABLE IS OUR STANDARD WRITTEN WARRANTY APPLICABLE TO THE PARTICULAR PRODUCT AND SALE. WE MAKE NO OTHER WARRANTY, EXPRESSED OR IMPLIED. TEREX CRANES, INC 2005 PRINTED IN U.S.A FEBRUARY 25, 2005

7 Range Diagram and Lifting Capacity T340-1 Cranes RANGE DIAGRAM BOOM Dimensions are for largest factory furnished hook block and hook & ball, with anti-two block activated COUNTER WEIGHT BOOM LENGTH UPPERSTRUCTURE STABILITY PERCENTAGE PCSA CLASS F. BUMPER 1,850 LB 30'-94' W/AUX. WINCH 6,100 LB W/O AUX. WINCH 7,200 LB ON OUTRIGGERS 85% ON TIRES 75% CRANE WORKING CONDITIONS REDUCTION IN MAIN BOOM CAPACITY All jib in stowed position 0 lb Aux. boom in head sheave 100lb HOOK BLOCK WEIGHTS Hook and ball 25T hook block (2 sheave) 30T hook block (3 sheave) 40T hook block (4 sheave) 239 lb 682 lb 670 lb 690 lb

8 T ' - 94' BOOM AND HEAVY LIFT PACKAGE ON OUTRIGGERS - FULLY EXTENDED BOOM LENGTH 30 BOOM LENGTH 39 BOOM LENGTH 50 LOADED LOADED LOADED LOAD BOOM OVER BOOM OVER BOOM OVER LOAD RADIUS ANGLE REAR 360º ANGLE REAR 360º ANGLE REAR 360º RADIUS (FT) (DEG) (LB) (LB) (DEG) (LB) (LB) (DEG) (LB) (LB) (FT) USE THESE CHARTS ONLY WHEN ALL OUTRIGGERS ARE FULLY EXTENDED ,000* 80, ,100* 70, ,600* 46,600* ,000* 61, ,600* 46,600* ,600* 46,600* ,400* 49, ,600* 46,600* 68 44,300* 44,300* ,300* 35, ,100* 36,100* ,600* 36,600* ,700* 26, ,600* 27,600* ,100* 28,100* ** ,900* 19, ,400* 20, ** ,900 15, ,300 11, ,500 9, ** ON OUTRIGGERS - FULLY EXTENDED BOOM LENGTH 61 BOOM LENGTH 72 BOOM LENGTH 83 BOOM LENGTH 94 LOADED LOADED LOADED LOADED LOAD BOOM OVER BOOM OVER BOOM OVER BOOM OVER LOAD RADIUS ANGLE REAR 360º ANGLE REAR 360º ANGLE REAR 360º ANGLE REAR 360º RADIUS (FT) (DEG) (LB) (LB) (DEG) (LB) (LB) (DEG) (LB) (LB) (DEG) (LB) (LB) (FT) ,100* 38,100* ,000* 33,000* ,400* 27,400* ,900* 27,900* ,100* 23,100* ,800* 21,800* ,500* 17,500* ,800* 20, ,900* 19,900* 66 18,300* 18,300* 69 15,000* 15,000* ,200 15, ,400* 15, ,900* 15,900* ,100* 13,100* ,600 12, ,700 12, ,800* 12, ,500* 11,500* ,900 9, ,100 9, ,100* 10, ,100* 10, ,900 7, ,100 8, ,200 8, ,000* 8, ,200 6, ,500 6, ,600 6, ,200* 6, ** ,200 5, ,300 5, ,300* 5, ,100 4, ,300 4, ,300 4, ** ,400 3, ,500 4, ,600 3, ,700 3, ** ,000 2, ,400 2, ** 90 BOOM LENGTH 30 BOOM LENGTH 39 BOOM LENGTH 50 BOOM LENGTH 61 BOOM LENGTH 72 BOOM LENGTH 83 BOOM LENGTH 94 LOAD OVER LOAD OVER LOAD OVER LOAD OVER LOAD OVER LOAD OVER LOAD OVER RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) ,700 25, ,700 15, ,300 9, ,800 6, ,600 4, ,000 2, ,900 1,800

9 T ' - 94' BOOM AND HEAVY LIFT PACKAGE ON OUTRIGGERS - MID POSITION BOOM LENGTH BOOM LENGTH 45 BOOM LENGTH 57 BOOM LENGTH 69 BOOM LENGTH 81 BOOM LENGTH 93 BOOM LENGTH 105 LOAD BOOM BOOM BOOM BOOM BOOM BOOM BOOM LOAD RADIUS ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º RADIUS (FT) (DEG) (LB) (DEG) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (FT) ,900* ,000* ,600* ,800* ,600* ,600* , , , ,100* , , , , , , , , , , , , ** , , , , , , ** , , , , , , , , , , , , , , , ** , , , , , , , , , , , BOOM LENGTH BOOM LENGTH 45 BOOM LENGTH 57 BOOM LENGTH 69 BOOM LENGTH 81 BOOM LENGTH 93 BOOM LENGTH 105 BOOM BOOM BOOM BOOM BOOM BOOM BOOM ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º (DEG) (LB) (DEG) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) USE THESE CHARTS ONLY WHEN ALL OUTRIGGERS ARE PINNED IN MID POSITION , ON OUTRIGGERS - RETRACTED BOOM LENGTH 30 BOOM LENGTH 39 BOOM LENGTH 50 BOOM LENGTH 61 BOOM LENGTH 72 BOOM LENGTH 83 BOOM LENGTH 94 LOAD BOOM BOOM BOOM BOOM BOOM BOOM BOOM LOAD RADIUS ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º RADIUS (FT) (DEG) (LB) (DEG) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (FT) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , BOOM LENGTH 30 BOOM LENGTH 39 BOOM LENGTH 50 BOOM LENGTH 61 BOOM LENGTH 72 BOOM LENGTH 83 BOOM LENGTH 94 BOOM BOOM BOOM BOOM BOOM BOOM BOOM ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º (DEG) (LB) (DEG) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) USE THESE CHARTS ONLY WHEN ALL OUTRIGGERS ARE PINNED IN MID POSITION ,600

10 T ' - 94' BOOM AND HEAVY LIFT PACKAGE SIDE STOW JIB ON FULLY EXTENDED OUTRIGGERS 32' OFFSETTABLE JIB 49' OFFSETTABLE JIB 0º OFFSET 15º OFFSET 30º OFFSET 0º OFFSET 15º OFFSET 30º OFFSET LOADED LOAD LOAD LOAD LOAD LOAD LOAD LOADED BOOM RADIUS REAR RADIUS REAR RADIUS REAR RADIUS REAR RADIUS REAR RADIUS REAR BOOM ANGLE (REF) ONLY 360º (REF) ONLY 360º (REF) ONLY 360º (REF) ONLY 360º (REF) ONLY 360º (REF) ONLY 360º ANGLE (DEG) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (DEG) ,100* 9,100* 46 7,700* 7,700* 52 5,900* 5,900* 41 5,100* 5,100* 55 3,400* 3,400* 62 2,700* 2,700* ,600* 8,600* 49 7,300* 7,300* 55 5,800* 5,800* 47 4,800* 4,800* 59 3,300* 3,300* 68 2,700* 2,700* ,200* 8,200* 52 7,000* 7,000* 58 5,600* 5,600* 52 4,500* 4,500* 64 3,200* 3,200* 73 2,600* 2,600* ,800* 7, ,200* 6,200* 63 5,100* 5,100* 60 4,100* 4,100* 70 3,000* 3,000* 79 2,500* 2,500* ,700* 6, ,500* 5,500* 68 4,600* 4,600* 66 3,800* 3,800* 76 2,900* 2,900* 84 2,500* 2,500* ,900* 5, ,900* 4, ,200* 4,200* 71 3,600* 3,600* 81 2,800* 2,800* 88 2,400* 2,400* ,200* 4, ,400* 4, ,800* 3,800* 77 3,400* 3,400* 86 2,700* 2,700* 93 2,400* 2, ,400* 3, ,900* 3, ,400* 3, ,100* 3, ,600* 2, ,300* 2, ,800* 2, ,400* 2, ,100* 2, ,900* 2, ,500* 2, ,300* 2, ,300* 2, ,900* 2, ,800* 2, ,800* 1, ,400* 1, ,200* 1, ,900* 1, ,700* 1, ,500* 1, ,400* 1, ,100 1, ,000* 1, ,400* 1, ,300* 1, ,200* 1, ,000 1, ,800 1, ,800* 1, , , ,900* , , , , , , , , , , , NOTES FOR JIB CAPACITIES A. For all boom lengths less than the maximum with a jib erected, the rated loads are determined by boom angle only in the appropriate column. B. For boom angle not shown, use th ecpacity of the next lower boom angle. C. Listed radii are for extended main boom only. ON TIRES MAX BOOM BOOM STRAIGHT OVER RADIUS LENGTH REAR (FT) (FT) 0 TO 2 1/2 MPH , , , , , , , ,700 A. For Pick and Carry operations, boom must be centered over the front of the crane with swing brake and lock engaged. Use minimum boom point height and keep load close to ground surface. B. The load should be restrained from swinging. NO ON TIRE OPERATION WITH JIB ERECTED. C. Without outriggers, never maneuver the boom beyond listed load radii for applicable tires to ensure stability. D. Creep speed is crane movement of less than 200' (61 m) in a 30 minute period and not exceeding 1.0 mph (1.6 km/h). E. Refer to General Notes for additional information. MAXIMUM PERMISSIBLE HOIST LINE LOAD LINE PARTS MAX. LOAD 9,080 18,160 27,240 36,320 45,400 54,480 63,560 72,640 81,720 90,800 BOOM HEAD 2 3-D D D D D HOOK BLOCK D 3 3-D D D D WIRE ROPE: 5/8" ROTATION RESISTANT COMPACTED STRAND, 18X19 OR 19X19 MINIMUM BREAKING STRENGTH TONS 5.8" 6X19 OR 6X37 IWRC IPS PREFORMED RIGHT REGULAR LAY MINIMUM BREAKING STRENGTH TONS

11 Range Diagram and Lifting Capacity T340-1XL Cranes 40 TON LIFTING CAPACITY RANGE DIAGRAM 33.75' - 105' BOOM Dimensions are for largest factory furnished hook block and hook & ball, with anti-two block activated COUNTER WEIGHT BOOM LENGTH OUTRIGGER SPREAD STABILITY PERCENTAGE PCSA CLASS W/AUX. WINCH 8,900 LB W/O AUX. WINCH 10,000 LB 30'-94' 19' ON OUTRIGGERS 85% ON TIRES 75% CRANE WORKING CONDITIONS REDUCTION IN MAIN BOOM CAPACITY All jib in stowed position 0 lb Aux. boom in head sheave 100lb HOOK BLOCK WEIGHTS Hook and ball 25T hook block (2 sheave) 30T hook block (3 sheave) 40T hook block (4 sheave) 239 lb 682 lb 670 lb 690 lb

12 T340-1XL 33.75' - 105' BOOM ON OUTRIGGERS - FULLY EXTENDED BOOM LENGTH BOOM LENGTH 45 BOOM LENGTH 57 LOADED LOADED LOADED LOAD BOOM OVER BOOM OVER BOOM OVER LOAD RADIUS ANGLE REAR 360º ANGLE REAR 360º ANGLE REAR 360º RADIUS (FT) (DEG) (LB) (LB) (DEG) (LB) (LB) (DEG) (LB) (LB) (FT) USE THESE CHARTS ONLY WHEN ALL OUTRIGGERS ARE FULLY EXTENDED ,000* 80,000* ,500* 64,500* ,600* 46,600* ,100* 58,100* ,600* 46,600* 74 46,600* 46,600* ,800* 50,800* ,600* 46,600* ,600* 44,600* ,700* 38,500* ,900* 38,900* ,600* 36,600* ,000* 28,700* ,000* 29,700* ,100* 30,300* ,600* 22, ,200* 23, ,400 16, ,000 17, ,200 12, ,900 13, ,900 10, ,600 8, ON OUTRIGGERS - FULLY EXTENDED BOOM LENGTH 69 BOOM LENGTH 81 BOOM LENGTH 93 BOOM LENGTH 105 LOADED LOADED LOADED LOADED LOAD BOOM OVER BOOM OVER BOOM OVER BOOM OVER LOAD RADIUS ANGLE REAR 360º ANGLE REAR 360º ANGLE REAR 360º ANGLE REAR 360º RADIUS (FT) (DEG) (LB) (LB) (DEG) (LB) (LB) (DEG) (LB) (LB) (DEG) (LB) (LB) (FT) ,700* 41,700* ,900* 34,900* 73 30,700* 30,700* ,500* 29,500* ,100* 26,100* 72 23,500* 23,500* ,500* 23, ,600* 22,600* ,400* 20,400* ,700* 18,700* ,300 17, ,700* 17, ,800* 17,800* ,300* 16,300* ,200 13, ,400 14, ,700* 14, ,500* 14, ,300 11, ,500 11, ,600 11, ,000* 11, ,000 9, ,200 9, ,400 9, ,500 9, ,200 7, ,500 7, ,600 7, ,700 7, ,700 6, ,000 6, ,200 6, ,300 6, ,800 5, ,000 5, ,100 5, ,800 4, ,000 4, ,100 4, ,900 3, ,100 3, ,200 3, ,300 3, ,500 3, ,700 2, ,800 2, ,300 2, ,800 1, ,300 1, BOOM LENGTH BOOM LENGTH 45 BOOM LENGTH 57 BOOM LENGTH 69 BOOM LENGTH 81 BOOM LENGTH 93 BOOM LENGTH 105 LOAD OVER LOAD OVER LOAD OVER LOAD OVER LOAD OVER LOAD OVER LOAD OVER RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) ,400 22, ,900 12, ,600 7, ,600 4, ,600 3, ,200 2, ,200 1,100

13 T340-1XL 33.75' - 105' BOOM ON OUTRIGGERS - MID POSITION BOOM LENGTH BOOM LENGTH 45 BOOM LENGTH 57 BOOM LENGTH 69 BOOM LENGTH 81 BOOM LENGTH 93 BOOM LENGTH 105 LOAD BOOM BOOM BOOM BOOM BOOM BOOM BOOM LOAD RADIUS ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º RADIUS (FT) (DEG) (LB) (DEG) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (FT) ,500* ,600* ,100* ,600* ,600* , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , BOOM LENGTH BOOM LENGTH 45 BOOM LENGTH 57 BOOM LENGTH 69 BOOM LENGTH 81 BOOM LENGTH 93 BOOM LENGTH 105 BOOM BOOM BOOM BOOM BOOM BOOM BOOM ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º (DEG) (LB) (DEG) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) USE THESE CHARTS ONLY WHEN ALL OUTRIGGERS ARE PINNED IN MID POSITION , , , ,000 ON OUTRIGGERS - RETRACTED BOOM LENGTH BOOM LENGTH 45 BOOM LENGTH 57 BOOM LENGTH 69 BOOM LENGTH 81 BOOM LENGTH 93 BOOM LENGTH 105 LOAD BOOM BOOM BOOM BOOM BOOM BOOM BOOM LOAD RADIUS ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º RADIUS (FT) (DEG) (LB) (DEG) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (FT) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , BOOM LENGTH BOOM LENGTH 45 BOOM LENGTH 57 BOOM LENGTH 69 BOOM LENGTH 81 BOOM LENGTH 93 BOOM LENGTH 105 BOOM BOOM BOOM BOOM BOOM BOOM BOOM ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º (DEG) (LB) (DEG) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) USE THESE CHARTS ONLY WHEN ALL OUTRIGGERS ARE PINNED IN MID POSITION ,200

14 T340-1XL 33.75' - 105' BOOM SIDE STOW JIB ON FULLY EXTENDED OUTRIGGERS 32' OFFSETTABLE JIB 49' OFFSETTABLE JIB 0º OFFSET 15º OFFSET 30º OFFSET 0º OFFSET 15º OFFSET 30º OFFSET LOADED LOAD LOAD LOAD LOAD LOAD LOAD LOADED BOOM RADIUS REAR RADIUS REAR RADIUS REAR RADIUS REAR RADIUS REAR RADIUS REAR BOOM ANGLE (REF) ONLY 360º (REF) ONLY 360º (REF) ONLY 360º (REF) ONLY 360º (REF) ONLY 360º (REF) ONLY 360º ANGLE (DEG) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (DEG) ,300* 9,300* 51 8,500* 8,500* 57 6,600* 6,600* 47 5,100* 5,100* 57 3,400* 3,400* 66 2,700* 2,700* ,900* 8,900* 55 8,200* 8,200* 61 6,400* 6,400* 52 4,800* 4,800* 63 3,300* 3,300* 71 2,700* 2,700* ,500* 8,500* 59 7,800* 7,800* 65 6,300* 6,300* 58 4,500* 4,500* 69 3,200* 3,200* 76 2,600* 2,600* ,900* 7, ,400* 6, ,000* 6,000* 65 4,100* 4,100* 76 3,000* 3,000* 82 2,500* 2,500* ,300* 6, ,800 5, ,900* 5, ,800* 3,800* 83 2,900* 2,900* 89 2,500* 2,500* ,400 5, ,700 4, ,600 4, ,600* 3,600* 89 2,800* 2,800* 95 2,400* 2,400* ,300 4, ,900 3, ,900 3, ,400* 3,400* 95 2,700* 2,700* 101 2,400* 2,400* ,400 3, ,200 3, ,100 2, ,100* 2, ,600* 2, ,300* 2,300* ,700 2, ,500 2, ,500 2, ,900* 2, ,500* 2, ,300* 1, ,100 2, ,900 1, ,900 1, ,500 1, ,300 1, ,200* 1, ,500 1, ,400 1, ,300 1, ,000 1, ,900 1, ,800 1, ,900 1, ,800 1, , , , , , , , , , , , , NOTES FOR JIB CAPACITIES A. For all boom lengths less than the maximum with a jib erected, the rated loads are determined by boom angle only in the appropriate column. B. For boom angle not shown, use th ecpacity of the next lower boom angle. C. Listed radii are for extended main boom only. ON TIRES MAX ALL BOOM PICK AND CARRY RADIUS LENGTH STATIONARY CREEP 2.5 MPH (FT) (FT) STRAIGHT OVER REAR ,700 21,700 16,500* ,600 15,600 14,900* ,800 12,800 12,700* ,500 8,500 8, ,800 5,800 5, ,800 3,800 3, ,500 2,500 2, ,700 1,700 1, ,000 1,000 1,000 NOTES FOR ON TIRE CAPACITIES A. For Pick and Carry operations, boom must be centered over the front of the crane with swing brake and lock engaged. Use minimum boom point height and keep load close to ground surface. Travel must be on a smooth surface. B. The load should be restrained from swinging. NO ON TIRE OPERATION WITH JIB ERECTED. C. Without outriggers, never maneuver the boom beyond listed load radii for applicable tires to ensure stability. D. Creep speed is crane movement of less than 200' (61 m) in a 30 minute period and not exceeding 1.0 mph (1.6 km/h). E. Refer to General Notes for additional information. MAXIMUM PERMISSIBLE HOIST LINE LOAD LINE PARTS MAX. LOAD 9,080 18,160 27,240 36,320 45,400 54,480 63,560 72,640 81,720 90,800 BOOM HEAD 2 3-D D D D D HOOK BLOCK D 3 3-D D D D WIRE ROPE: 5/8" ROTATION RESISTANT COMPACTED STRAND, 18X19 OR 19X19 MINIMUM BREAKING STRENGTH TONS 5.8" 6X19 OR 6X37 IWRC IPS PREFORMED RIGHT REGULAR LAY MINIMUM BREAKING STRENGTH TONS

15 Range Diagram and Lifting Capacity T335-1 Cranes 35 TON LIFTING CAPACITY RANGE DIAGRAM 30' - 94' BOOM Dimensions are for largest factory furnished hook block and hook & ball, with anti-two block activated COUNTERWEIGHT UPPERSTRUCTURE BOOM LENGTH STABILITY PERCENTAGE PCSA CLASS FRONT BUMPER 500 LB W/AUX. WINCH 900 LB W/O AUX. WINCH 2000 LB 30'-94' ON OUTRIGGERS 85% ON TIRES 75% CRANE WORKING CONDITIONS REDUCTION IN MAIN BOOM CAPACITY All jib in stowed position 0 lb Aux. boom in head sheave 100lb HOOK BLOCK WEIGHTS Hook and ball 25T hook block (2 sheave) 30T hook block (3 sheave) 40T hook block (4 sheave) 239 lb 682 lb 670 lb 690 lb

16 T ' - 94' BOOM ON OUTRIGGERS - FULLY EXTENDED WITH 2,000 LB COUNTERWEIGHT BOOM LENGTH 30 BOOM LENGTH 39 BOOM LENGTH 50 LOADED LOADED LOADED LOAD BOOM OVER BOOM OVER BOOM OVER LOAD RADIUS ANGLE REAR 360º ANGLE REAR 360º ANGLE REAR 360º RADIUS (FT) (DEG) (LB) (LB) (DEG) (LB) (LB) (DEG) (LB) (LB) (FT) USE THESE CHARTS ONLY WHEN ALL OUTRIGGERS ARE FULLY EXTENDED ,000* 70,000* ,600* 46,600* ,000* 60,000* ,600* 46,600* ,600* 46,600* ,700* 46,700* ,600* 46,600* ,300* 44,300* ,300* 33,300* ,100* 34,100* ,600* 34,600* , ,900 22, ,300 23, ** ,000 15, ,400 16, ** ,100 11, ,100 9, ,800 7, ** ON OUTRIGGERS - FULLY EXTENDED BOOM LENGTH 61' BOOM LENGTH 72' BOOM LENGTH 83' BOOM LENGTH 94' LOADED LOADED LOADED LOADED LOAD BOOM OVER BOOM OVER BOOM OVER BOOM OVER LOAD RADIUS ANGLE REAR 360º ANGLE REAR 360º ANGLE REAR 360º ANGLE REAR 360º RADIUS (FT) (DEG) (LB) (LB) (DEG) (LB) (LB) (DEG) (LB) (LB) (DEG) (LB) (LB) (FT) ,100* 38,100* ,000* 33,000* ,400* 27,400* ,600 23, ,100* 23,100* ,800* 21,800* ,500* 17, ,700 16, ,900 16, ,300* 16, ,000* 15, ,400 12, ,500 12, ,700 12, ,000* 12, ,400 9, ,500 9, ,700 9, ,500* 9, ,200 7, ,300 7, ,500 7, ,500 7, ,500 5, ,700 6, ,800 6, ,900 6, ,100 4, ,300 4, ,500 4, ,600 5, ** ,300 3, ,400 4, ,500 4, ,300 3, ,500 3, ,600 3, ** ,800 2, ,900 2, ,100 2, ,200 2, ** ,700 1, ,200 1, BOOM LENGTH 30 BOOM LENGTH 39 BOOM LENGTH 50 BOOM LENGTH 61 BOOM LENGTH 72 BOOM LENGTH 83 BOOM LENGTH 94 LOAD OVER LOAD OVER LOAD OVER LOAD OVER LOAD OVER LOAD OVER LOAD OVER RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) ,700 20, ,800 11, ,600 6, ,700 5, ,900 2, ,700 1, ,

17 T ' - 94' BOOM ON OUTRIGGERS - WITH 2,000 LB COUNTERWEIGHT BOOM LENGTH 30 BOOM LENGTH 45 BOOM LENGTH 57 BOOM LENGTH 69 BOOM LENGTH 81 BOOM LENGTH 93 BOOM LENGTH 105 LOAD BOOM BOOM BOOM BOOM BOOM BOOM BOOM LOAD RADIUS ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º RADIUS (FT) (DEG) (LB) (DEG) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (FT) ,900* ,600* , ,600* ,600* , , , , , , , , , , , , , , , , ** , , , , , , ** , , , , , , , , , , , , , , ** , , , , BOOM LENGTH 30 BOOM LENGTH 39 BOOM LENGTH 50 BOOM LENGTH 61 BOOM LENGTH 81 BOOM LENGTH 93 BOOM LENGTH 105 RADIUS 360º RADIUS 360º RADIUS 360º RADIUS 360º RADIUS 360º RADIUS 360º RADIUS 360º (DEG) (LB) (DEG) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) USE THESE CHARTS ONLY WHEN ALL OUTRIGGERS ARE PINNED IN MID POSITION , , ,100 ON OUTRIGGERS - RETRACTED WITH 2,000 LB COUNTERWEIGHT BOOM LENGTH 30 BOOM LENGTH 39 BOOM LENGTH 50 BOOM LENGTH 61 BOOM LENGTH 72 BOOM LENGTH 93 BOOM LENGTH 105 LOAD BOOM BOOM BOOM BOOM BOOM BOOM BOOM LOAD RADIUS ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º RADIUS (FT) (DEG) (LB) (DEG) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (FT) , , , , , , , , , , , , , , , , , , , ** , , , , , , ** , , , , , , , , BOOM LENGTH 30 BOOM LENGTH 39 BOOM LENGTH 50 BOOM LENGTH 61 BOOM LENGTH 72 BOOM LENGTH 83 BOOM LENGTH 94 LOAD LOAD LOAD LOAD LOAD LOAD LOAD ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º (DEG) (LB) (DEG) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) USE THESE CHARTS WHEN ALL OUTRIGGER BEAMS ARE NOT IN EITHER THE MID OR FULLY EXTENDED POSITION ,

18 T ' - 94' BOOM SIDE STOW JIB ON FULLY EXTENDED OUTRIGGERS WITH 2,000 LB COUNTERWEIGHT 32' OFFSETTABLE JIB 49' OFFSETTABLE JIB 0º OFFSET 15º OFFSET 30º OFFSET 0º OFFSET 15º OFFSET 30º OFFSET LOADED LOAD LOAD LOAD LOAD LOAD LOAD LOADED BOOM RADIUS REAR RADIUS REAR RADIUS REAR RADIUS REAR RADIUS REAR RADIUS REAR BOOM ANGLE (REF) ONLY 360º (REF) ONLY 360º (REF) ONLY 360º (REF) ONLY 360º (REF) ONLY 360º (REF) ONLY 360º ANGLE (DEG) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (DEG) ,100* 9,100* 46 7,700* 7, ,900* ,100* 5,100* 55 3,400* 3,400* 62 2,700* 2,700* ,600* 8,600* 49 7,300* 6, ,800* 4, ,800* 4,800* 59 3,300* 3,300* 68 2,700* 2,700* ,200* 8,200* * ,600* 4, * 4,500* 64 3,200* 3,200* 73 2,600* 2,600* ,300 6, ,200* 4, ,100* 3, ,100* 4,100* 70 3,000* 3,000* 79 2,500* 2.500* ,000 4, ,400 3, ,600* 2, ,800* 3,800* 76 2,900* 2,900* 84 2,500* 2,500* ,000 3, ,400 2, , ,600* 3, ,800* 2, ,400* 2,400* ,200 3, ,600 1, ,500 1, ,400* 2, ,700* 2, ,400* 1, ,400 2, ,000 1, , ,800 1, ,500 1, ,300* 1, ,800 1, , , ,200 1, ,000 1, , , , , , , , , , , , , , , , , , NOTES FOR JIB CAPACITIES A. For all boom lengths less than the maximum with a jib erected, the rated loads are determined by boom angle only in the appropriate column. B. For boom angle not shown, use th ecpacity of the next lower boom angle. C. Listed radii are for extended main boom only. ON TIRES MAX BOOM BOOM STRAIGHT OVER RADIUS LENGTH REAR (FT) (FT) 0 TO 2 1/2 MPH , , , , , ,700 NOTES FOR ON TIRE CAPACITIES A. For Pick and Carry operations. Boom must be centered over the rear of the crane with swing brake and lock engaged. Use minimum boom point height and keep load close to ground surface. B. The load should be restrained from swinging. NO ON TIRE OPERATION WITH JIB ERECTED. C. Without outriggers, never maneuver the boom beyond listed load radii for applicable tires to ensure stability. D. Creep speed is crane movement of less than 200'(61m) in a 30 minute period and not exceeding 1.0 mph (1.6 km/h). E. Refer to General Notes for additional information. MAXIMUM PERMISSIBLE HOIST LINE LOAD LINE PARTS MAX. LOAD 9,080 18,160 27,240 36,320 45,400 54,480 63,560 72,640 81,720 90,800 BOOM HEAD 2 3-D D D D D HOOK BLOCK D 3 3-D D D D WIRE ROPE: 5/8" ROTATION RESISTANT COMPACTED STRAND, 18X19 OR 19X19 MINIMUM BREAKING STRENGTH TONS 5/8" 6 X 19 OR 6 X 37 IWRC IPS PREFORMED RIGHT REGULAR LAY MINIMUM BREAKING STRENGTH TONS

19 T ' - 94' BOOM HEAVY LIFT PACKAGE ON OUTRIGGERS - FULLY EXTENDED BOOM LENGTH 30 BOOM LENGTH 39 BOOM LENGTH 50 LOADED LOADED LOADED LOAD BOOM OVER BOOM OVER BOOM OVER LOAD RADIUS ANGLE REAR 360º ANGLE REAR 360º ANGLE REAR 360º RADIUS (FT) (DEG) (LB) (LB) (DEG) (LB) (LB) (DEG) (LB) (LB) (FT) * * ,600* 46,600* ,000* 61,000* ,600* 46,600* * 46,600* ,400* 49,400* * * ,300* 44,300* * 35,300* ,100* 36,100* ,600* * * 26,700* 42,0 27,600* 27,600* * 28,100* ** * 19,900 47, * 20, ** , ,300 11, ,500 9, ** USE THESE CHARTS ONLY WHEN ALL OUTRIGGERS ARE FULLY EXTENDED ON OUTRIGGERS - FULLY EXTENDED BOOM LENGTH 61' BOOM LENGTH 72' BOOM LENGTH 83' BOOM LENGTH 94' LOADED LOADED LOADED LOADED LOAD BOOM OVER BOOM OVER BOOM OVER BOOM OVER LOAD RADIUS ANGLE REAR 360º ANGLE REAR 360º ANGLE REAR 360º ANGLE REAR 360º RADIUS (FT) (DEG) (LB) (LB) (DEG) (LB) (LB) (DEG) (LB) (LB) (DEG) (LB) (LB) (FT) ,100* 38,100* I ,000* * ,400* 27,400* ,900* 27,900* ,100* 23,100* ,800* 21,800* ,500* 17,500* ,800* 20, ,900* 19,900* ,300* 18,300* ,000* 15,000* O.4 18,200 15, ,400* 15, ,900* 15,900* ,100* 13,100* ,600 12, ,700* 12, ,800* 12, ,500* 11,500* ,900 9, ,100* 9, ,100* 10, ,100* 10, ,900 7, ,100 8, ,200 8, ,000* 8, ,200 6, ,500 6, ,600 6, ,200* 6, ** ,200 5, ,300 5, ,300* 5, ,100 4, ,300 4, ,300 4, ** , ,500 4, ,600 3, ,700 3, ** ,000 2, ,400 2, ** 90 BOOM LENGTH 30 BOOM LENGTH 39 BOOM LENGTH 50 BOOM LENGTH 61 BOOM LENGTH 72 BOOM LENGTH 83 BOOM LENGTH 94 LOAD OVER LOAD OVER LOAD OVER LOAD OVER LOAD OVER LOAD OVER LOAD OVER RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º RADIUS REAR 360º (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) * 25,700* ,700 15, ,300 9, ,800 6, ,600 4, ,000 2, ,900 1,800

20 T ' - 94' BOOM HEAVY LIFT PACKAGE ON OUTRIGGERS - MID POSITION BOOM LENGTH 30 BOOM LENGTH 39 BOOM LENGTH 50 BOOM LENGTH 61 BOOM LENGTH 72 BOOM LENGTH 83 BOOM LENGTH 94 LOAD BOOM BOOM BOOM BOOM BOOM BOOM BOOM LOAD RADIUS ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º RADIUS (FT) (DEG) (LB) (DEG) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (FT) ,000* ,600* ,800* ,600* ,600* , , , ,100* , , , , , , , , , , , , ** , , , , , , ** , , , , , , , , , , , , , , , ** , , , , , , , , , , , BOOM LENGTH 30 BOOM LENGTH 39 BOOM LENGTH 50 BOOM LENGTH 61 BOOM LENGTH 72 BOOM LENGTH 83 BOOM LENGTH 94 RADIUS 360º RADIUS 360º RADIUS 360º RADIUS 360º RADIUS 360º RADIUS 360º RADIUS 360º (DEG) (LB) (DEG) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) USE THESE CHARTS ONLY WHEN ALL OUTRIGGERS ARE PINNED IN MID POSITION , , , ,000 ON OUTRIGGERS - RETRACTED BOOM LENGTH 30 BOOM LENGTH 39 BOOM LENGTH 50 BOOM LENGTH 61 BOOM LENGTH 72 BOOM LENGTH 93 BOOM LENGTH 105 LOAD BOOM BOOM BOOM BOOM BOOM BOOM BOOM LOAD RADIUS ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º RADIUS (FT) (DEG) (LB) (DEG) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (FT) , , , , , , , , , , , , B, , , , , , , ** , , , , , , , , , , , BOOM LENGTH 30 BOOM LENGTH 39 BOOM LENGTH 50 BOOM LENGTH 61 BOOM LENGTH 72 BOOM LENGTH 83 BOOM LENGTH 94 LOAD LOAD LOAD LOAD LOAD LOAD LOAD ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º ANGLE 360º (DEG) (LB) (DEG) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) USE THESE CHARTS WHEN ALL OUTRIGGER BEAMS ARE NOT IN EITHER THE MID OR FULLY EXTENDED POSITION ,600