28' 6" (8700) 17' 6" (5340) Ra 37' 1" (11 310) R 39' 8" (12 110) R 38' 10" (11 850) Ra 35' 6" (10 840) R 22' 10" (6950) Ra 17' 7" (5355)

Transcription

1

2 Dimensions 17' 6" (5340) 28' 6" (8700) 11' (3360) 9' (2740) R 39' 8" (12 ) Ra 37' 1" (11 310) R 20' 10" (6345) R 18' 4" (55) R 15' 9" (40) 9' 9" (29) 14' 5" (4400) 19' 8" (6000) 27' 11" (8500) R 47' 2" (14 370) Ra 42' 8" (13 010) R 38' 8" (11 790) Ra 33' 7" (10 240) R 43' 7" (13 2) Ra 38' 6" (11 740) R 38' 10" (11 850) Ra 35' 6" (10 840) 18' 10" (5740) 16' 3" (4960) R 22' 10" (6950) Ra 17' 7" (5355) 28' 6" (8700) 12' 3" (3740) 1' 3" (375) 50' 9" (15 460) 64' 7" (19 6) 15' 6" (4730) 8' 6" (2600) 5' 3" (1610) 2' 9" (850) 13' (3950) + 6-1/2" () - 5" () ' 9" (2370) 7' 10-1/2" (2400) 5' 7" (0) 10' 6" (3200) 50' 5" (15 370) 5' 5" (0) 1' 4" (400) 59' 3" (18 050) 7' 10-1/2" (2400) 5' 5" (0) 4' 11" (0) 2' 10" (870) 1' (310) Note: ( ) Reference dimensions in mm BASIC WEIGHTS (LBS.) Axles 1 & 2 Axles 3-6 Total With Mercedes Power 50, , ,648 With Cummins Power 50, , ,353 Additions: Outrigger Pads Removable rear outrigger box option -(1,197) 3,402 2,205 Auxiliary Hoist -(5,362) 11,446 6,081 Removal: Front Outrigger Beams & Jacks -(3,377) -(1,9) -(5,357) Rear Outrigger Beams & Jacks 3,732 -(9,652) -(5,920) Outrigger Box (must add weight above for option) 6,457 -(16,819) -(10,362) Substitute tires for standard (900) -(1,0) -(2,700) Boom Assembly (minus lift cylinder)* -(32,245) -(23,995) -(56,240) Telescope Sections 1-4* -(23,034) -(13,783) -(36,817) Lift Cylinder* -(2,121) -(3,258) -(5,379) *Reflects weights with superstructure facing forward 2

3 Working range ft. ( m) FEET FT. 159 FT. 123 FT MA. BOOM ANGLE 87 FT. 51 FT FEET AIS OF ROTATION 3

4 Superstructure specifications Boom 51 ft ft. (15.5 m - 60 m) five section, full power boom with patented twin-lock boom pinning system. Maximum tip height: 207 ft. (63 m). Boom Elevation Single lift cylinder with safety valve provides boom angle from -1.5 to +82. Lattice Jib Luffing Jib is a lattice design with lengths of 69 ft ft. (21 m - 61 m) in sections of 26 ft. (8 m). The luffing jib converts to a fixed offset lattice jib using an offset angle adapter and provides lengths of 62 ft ft. (19 m - 51 m) offsettable at 3 and 25. Load Moment & Anti-Two Block System Load moment and anti-two block system with audio/visual warning and control lever lockout provides electronic display of boom angle, length, radius, tip height, relative load moment, maximum permissible load, load indication and warning of impending two-block condition. Cab All aluminum construction cab is tiltable (approximately 20 ) and includes safety glass and adjustable operator s seat with hydraulic suspension. Other features include engine dependent hot water heater, armrest integrated crane controls, and ergonomically arranged instrumentation. Swing 3 axial piston fixed displacement motors provide swing speed of RPM thru planetary gear box. Also provided is a spring applied, hydraulically released automatic swing brake with foot-operated release for free swing. Counterweight consisting of various sections with hydraulic installation/removal system (see counterweight configuration on page 16). Engine Mercedes-Benz OM906LA, diesel, 6 cylinders, water cooled, turbocharged, 258 HP ( kw) at 0 rpm. Max. torque: 3 ft./lbs. (0 Nm) at 0 rpm. Engine emission: EURO II/EUROMOT/EPA/CARB (non road). *Optional engine: Cummins 6 CTA , diesel, 6 cylinders 260 HP (194 kw) at 0 rpm. Fuel tank capacity: 87 gal. (330 L). Hydraulic system 4 axial piston variable displacement pumps provide four separate circuits for craning functions. Standard thermostatically controlled oil cooler keeps oil at optimum operating temperature. Tank capacity: 322 gal. (1220 L) Control system Full electronic control of all crane movements is accomplished using electrical control levers with automatic reset to zero. Controls are integrated with the LMI and engine management system by a CAN-BUS. Hoist Main and auxiliary hoist are powered by axial piston variable displacement motor with planetary gear and brake. Thumb-thumper hoist drum rotation indicator alerts operator of hoist movement. Main Auxiliary Line length: 984 ft. 1,378 ft. (300 m) (420 m) Rope diameter: 24 mm 24 mm Line speed: 460 ft./min. 426 ft./min. Line pull: 24,700 lbs. 24,700 lbs. (112 kn) (112 kn) Electrical system 24 V system with three-phase alternator 28 V/ A, 2 batteries 12 V/ Ah. *Optional equipment *Engine-independent hot water heater, with engine pre-heater *Second spotlight *Stereo/cassette player *Air Conditioning *Denotes optional equipment 4

5 Carrier specifications Chassis Box-type, torsion resistant frame is fabricated from high-strength steel. Outrigger System Hydraulic two-stage outrigger beams are extended by a single hydraulic cylinder and two cables. Outriggers can adjust to two positions: Fully extended () (8.5 m) Partially extended (50%) (6 m) Four 29.5 in. x 32 in. (750 mm x 810 mm), self stowing, steel outrigger pads provide rigid lifting base. Outrigger controls are located on both sides of the carrier. An electronic level indicator is located next to each outrigger control bos. In-cab and outrigger control station outrigger pressure readouts are also available. Engine Mercedes-Benz OM502LA, diesel, 8 cylinders, water cooled, turbo charged and aftercooled, 563 HP (420 kw) at 0 rpm. Max. torque: 1,971 ft./lbs. (2700 Nm) at 10 rpm. Engine emission: EURO II/EUROMOT/EPA/CARB (non road). *Optional engine: Cummins N525 E20 (EUROMOT/EPA/CARB - non road), diesel, 6 cylinders 533 HP (392 kw) at 0 rpm. Fuel Tank capacity: 132 gal. (500 L). Transmission Allison automatic CLT 755, 5 forward and 1 reverse speed. Transfer case with 2 speeds and inter-axle differential lock. Axles 6 axles. 1, 2, 4 and 5 are drive/steer. Axles 3 and 6 are steer only. (12 x 8 x 12). Suspension features the Grove exclusive MEGATRAK** suspension. This revolutionary design features an independent hydroneumatic system with hydraulic lockout acting on all wheels. The suspension can be raised 6-1/2 ( mm) or lowered 5 ( mm) both longitudinally and transversely and features an automatic leveling system for on-highway travel. Tires 12 tires, 20.5 R25. Steering Dual circuit steering system is hydraulic power assisted with a transfer case mounted, ground driven, emergency steering pump. Axles 1, 2, 3, 5 and 6 steer on highway. Separate steering of the 4th, 5th and 6th axle for all wheel steer and crab-steer is controlled by an electric rocker switch. Brakes A dual circuit air system operates on all wheels with a spring-applied, air released parking brake acting on axles 2, 4, 5 and 6. An air dryer is fitted to remove moisture from the air system. Auxiliary exhaust brake (Cummins) or transmission retarder (Mercedes) is standard. Cab Two-man, aluminum construction driver s cab includes the following features: safety glass; driver and passenger seats with hydraulic suspension, engine-dependent hot water heater, complete instrumentation and driving controls. Electrical system 24 V system with three-phase alternator 28 V/ A, 2 batteries 12 V/ Ah. *Optional equipment *Electric driveline retarder *12 tires, 10 R25 (vehicle width 9 ft. 10 in. [3 m]) *14.00 R25 tires (vehicle width 9 ft. 9 in. [2.98 m]) *Folding bunk bed in carrier cab *Engine-independent hot water heater, with engine pre-heater *Third seat *Trailing boom boost weight transfer kit *Air conditioning *Denotes optional equipment 5

6 ft. ( m) Feet 51** * *Lifting capacities greater than 430,000 lbs. ( kg) require special equipment **Over rear only, 28' 6" x 9' 4" ( Front, 0% Rear) outrigger base ft. ( m) 50% 19' 8" Spread Feet THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 6

7 ft. ( m),229 lbs. ( kg) ft. ( m) 17,637 lbs. (8 000 kg) ft. ( m) 0 lbs. (0 kg) THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 7

8 Working Range ft. ( m) ft. ( m) FEET FT. 115 FT. 82 MA. BOOM ANGLE 89 FT. 62 FT FT FT. 144 FT. 123 FT. 108 FT. 87 FT. 72 FT. 51 FT. 181 FT. FEET AIS OF ROTATION 8

9 ft. ( m) ft. ( m) 62 FT 89 FT 115 FT 141 FT 167 FT Feet ft. ( m) ft. ( m),229 lbs. ( kg) 62 FT 89 FT 115 FT 141 FT 167 FT Feet THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 9

10 Working Range ft. ( m) ft. ( m) FEET FT. 148 FT FT FT. 69 FT. 144 FT. 123 FT. 108 FT FT. 72 FT. 51 FT FEET AIS OF ROTATION 10

11 ft. ( m) 69 ft. (21.0 m) MAIN BOOM ANGLE ft. ( m) 95 ft. (3 m) MAIN BOOM ANGLE ft. ( m) 121 ft. (3 m) 70 MAIN BOOM ANGLE THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 11

12 ft. ( m) 148 ft. (4 m) MAIN BOOM ANGLE ft. ( m) 174 ft. ( m) 70 MAIN BOOM ANGLE ft. ( m) 200 ft. (61.0 m) THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane MAIN BOOM ANGLE

13 ft. ( m) 69 ft. (21.0 m) MAIN BOOM ANGLE ft. ( m) 95 ft. (29.0 m) MAIN BOOM ANGLE ft. ( m) 121 ft. (3 m) MAIN BOOM ANGLE THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 13

14 ft. ( m) 148 ft. (4 m) MAIN BOOM ANGLE ft. ( m) 174 ft. ( m) MAIN BOOM ANGLE THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 14

15 51 - ft. ( m) 200 ft. (61.0 m) MAIN BOOM ANGLE THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 15

16 Counterweight configurations 3A 3B 6' 3" (0) ,637 lbs. (00 kg) 18' 10" (5740) ,864 lbs. (00 kg) 3A. 15,432 lbs. (7000 kg) R 18' 4" (55) 3B. 15,432 lbs. (7000 kg) 4. 30,864 lbs. (00 kg 14' 5" (4400) 5. 33,067 lbs. (00 kg) 9' 9" (29) 6. 33,067 lbs. (00 kg) 7. 22,046 lbs. (10000 kg) 8' 2" (2490) 1 2 3A 3B ,046 lbs. (10000 kg) 2' 10" (870) 3' 2" (965) 3' 2" (965) 2' 10" (870) 6' 1" (1860) 7 7' 5" (2270) 5 6 7' 5" (2270) 6' 1" (1860) 8 Note: () Reference dimensions in mm 1 2 3A 3B ,637 lbs. 45,500 lbs. 79,635 lbs.,229 lbs. 176,367 lbs. 220,459 lbs. 16

17 Rated Lifting Capacities Symbols Glossary IMPORTANT NOTES: Frame Steering WARNING: THIS CHART IS ONLY A GUIDE. The notes below are for illustration only and should not be relied upon to operate the crane. The individual crane's load chart, operating instructions and other instruction plates must be read and understood prior to operating the crane. 1. All rated loads meet ANSI/ASME B30.5, Mobile and Locomotive Cranes. Testing and development were performed to SAEJ1063, Cantilevered Boom Crane Structures - Method of Test and SAEJ765 Crane Stability Test Code. 2. Capacities given do not include the weight of hook blocks, slings, auxiliary lifting equipment and load handling devices. Their weights must be added to the load to be lifted. When more than minimum required reeving is used, the additional rope weight shall be considered part of the load. 3. The machine shall be leveled on a firm supporting surface. Depending on the nature of the supporting surface, it may be necessary to have structural supports under the outrigger floats to spread the load to a larger bearing surface. 4. When either boom length or radius or both are between values listed, the smallest load shown at either the next larger radius or next longer or shorter boom length shall be used. Outriggers Outrigger Controls Engine Fuel Tank Capacity Electrical System Drive Lights Cab Boom Fixed Swingaway Transmission Axles Brakes Tires Suspension Rotation Boom Elevation Swing Counterweight Oil 5. For outrigger operation, outriggers shall be properly extended with tires raised off the ground before operating the boom or lifting loads. Tele-Swingaway Hydraulic System Jib Hoist Boom Nose Radius Boom Extension Boom Length Speed H Hookblock Grade Gear Lattice Extension Luffing Jib

18 Grove Worldwide World Headquarters Grove U.S. L.L.C Buchanan Trail East P.O. Box 21 Shady Grove, Pennsylvania 17256, U.S.A. Tel: [Int + 1] (717) Fax: [Int + 1] (717) Western Hemisphere, Asia/Pacific Grove Europe Limited* Sunderland SR4 6TT, England Tel: [Int + 44] Fax: [Int + 44] Europe, Africa, Middle East Grove Europe Limited* P.O. Box No A Kimber Road Abingdon, Oxfordshire, 0141SG Tel: [Int + 44] Fax: [Int + 44] *Grove Europe Limited, Registered in England, Number , Registered office, Crown Works, Pallion, Sunderland, Tyne & Wear, England SR4 6TT Deutsche Grove GmbH Sales and Service Helmholtzstrasse 12, Postfach 5026 D Langenfeld, Germany Tel: [Int + 49] (2173) Fax: [Int + 49] (2173) Wilhelmshaven Works Industriegelande West, Postfach 1853 D Wilhelmshaven, Germany Tel: [Int + 49] (4421) Fax: [Int + 49] (4421) Grove France S.A. 16, chaussée Jules-César, OSNY B.P. 203, CERGY PONTOISE CEDE France Tel: [Int + 33] (1) Int: [Int + 33] (1) Grove Asia/Pacific - Regional Office 171 Chin Swee Road #06-01 San Centre Singapore 0316 Tel: [Int + 65] Fax: [Int + 65] Asia/Pacific, Near East Grove China - Representative Office Beijing Suite 6074 No. 33 East Chang An Avenue Beijing, , China Tel: [Int + 86] (10) Fax: [Int + 86] (10) Grove Product Support Western Hemisphere, Asia/Pacific 1086 Wayne Avenue Chambersburg, Pennsylvania USA Tel: [Int + 1] (717) Fax: [Int + 1] (717) Europe, Africa, Middle East Sunderland SR4 6TT, England Tel: [Int + 44] Parts Fax: [Int + 44] Service Fax: [Int + 44] Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment, and price changes without notice. Illustrations shown may include optional equipment and accessories and may not include all standard equipment. Distributed By: Form No.: SB Part No.: M Printed in U.S.A.