MDT 218 product guide

Transcription

1 MDT product guide contents Features Specifications Component Weights features Topless jib with maximum radius of ft ( m) Two versions:. USt ( t) and USt ( t), lb ( 0 kg) maximum tip capacity at ft ( m) Internal and External climbing with K mast K00 or K00 mast/pivot *Product may be shown with optional equipment. MDT J Dimensions Load Charts Mast & Mechanisms MDT J Dimensions Load Charts Mast & Mechanisms MDT J (Metric) Dimensions Load Charts Mast & Mechanisms MDT J (Metric) Dimensions Load Charts Mast & Mechanisms Symbols Glossary

2 features Two cross-shaped bases are available for the MDT : ZD 0 and ZD. These provide a base for the crane without digging a deep foundation. The cab, slewing mechanism, and pivot create the towerhead which has the option to be ordered for a. ft (. m) or. ft ( m) mast connection. Three main assemblies to be installed of optimized weight with a minimum number of pins: towerhead, jib and counter-jib. Sling points are welded onto each assembly for easy handling. MDT The counter-jib ballast is common to most MDT City cranes for greater asset management of the topless tower cranes.

3 specifications Jib ft ( m) radius standard lattice jib. Patented six () bar knot design and joints. Catwalks in first two () ft ( m) sections for maintenance and easy access to sling points for erection and dismantling. Mounted as whole wired jib with hoist rope and trolley rope installed. One pin and two () safety pins at connection point to counter-jib. Sling points welded on jib, *lifting beam and *slings optional with crane. *Jib Extensions Optional base jib length of ft (0 m). Optional jib lengths start at 0. ft (. m) for standard jib with. ft (. m) insert. Additional jib sections of. ft ( m) available up to maximum jib length of. ft ( m). Counter-Jib Patented design in one compact package. Two () pins at connection point to turntable. Inclined position of ballast holder ensures self-locking of ballast blocks. Welded sling points. Counter-Jib Ballast (customer supplied) Two () concrete block styles for various ballasting combinations according to jib length:, lb ( 0 kg) and, lb ( 00 kg). Blocks are designed for safe and easy placement on the ground during erection and dismantling. Blocks are common to the MDT City range. *Cab C and S Vision cabs include heating, window vent, tinted glass, windshield wipers, sun visor, document case, side pocket, bottle holder, ergonomic seat with high back, adjustable armrests, height and seating with control units, front-to-back shifting and reclining back. C:. ft (,00 mm) width,. ft (,00 mm) height, and. ft (,0 mm) depth. S:. ft (,00 mm) width,. ft (,00 mm) height, and. ft (,0 mm) depth; air conditioning optional. Controls Dual axis joystick controls via umbilical cord at ground level. *Remote control with dual axis joysticks or in cab controls at seat available. Reeving SM for -part line application standard. *Optional -trolley or SM/DM (semi-automatic) hookblock for or -part line applications. Electrical Requirement 0 volt, 0 Hz measured at the turntable. Swing RVF Optima + slewing mechanism with maximum swing speed of 0. RPM. Progressive control of speed with counterslewing possible, anti-load swinging system makes aligning the load and jib easier. Hoist Grooved drum with electromagnetic safety brake. Progressive speed change according to the accelerating or decelerating ramps. Optima allows the hoist to adapt its speed to the weight of the load. MDT J: LVF 0 Optima *0 LVF 0 Optima *0 LVF 0 GH Optima Single Line Pull:. USt ( t). USt ( t). USt ( t) Line speed: ft/min ( m/min) 00 ft/min ( m/min) ft/min ( m/min) Horse Power: 0 HP 0 HP 0 HP Spooling Capacity: ft (0 m), ft ( m), ft (0 m) MDT J: 0 LVF Optima *0 LVF GH Optima Single Line Pull:. USt (. t). USt (. t) Line speed: ft/min (0 m/min) ft/min (0 m/min) Horse Power: 0 HP 0 HP Spooling Capacity: ft ( m),0 ft ( m) Specification of quantity of hoist rope is dependent upon customer s requirements and mast height. Trolley DVF :. HP variable frequency hoist with lb (00 kg) line pull and line speed of ft/min ( m/min). Progressive speed change according to acceleration or deceleration ramps controlled by the frequency converter. * Optional Equipment * STANDARD NORTH AMERICAN SPECFICATION for J: includes electric slip ring, ft ( m) jib, mounting accessories (slings), 0 LVF 0 Optima hoist, heating mechanism for hoist, -trolley hookblock, ft (0 m) hoist rope, Vision S cab with insulation, Dialog Visu, and anemometer. * Electric slip ring * Jib radius 0 ft ( m) * -Trolley hookblock * SM/DM (semi-automatic) hookblock * Dialog Visu * Cab air conditioning * Motorized greasing Consult price list for additional options *Anemometer & *Dialog Visu Electronic wind speed meter (anemometer) to alert the operator of wind speed conditions. Requires *Dialog Visu to display information. Crane can be operated with wind gusts up to MPH ( KPH). *Dialog Visu displays height under hook, position of jib trolley, loads and overload moment, and wind speed. * Denotes optional equipment specifications MDT NOTE: The information above is useful as a basic introduction to the crane. In no case may this serve as a substitute for the serial numbered manuals. Dimensions have been rounded to the nearest tenth.

4 specifications * Mast K mast in sizes of K00 (. ft [. m]) or K00 (. ft [ m]), panel or monoblock, and climbing or non-climbing available. Lengths of. ft (. m),. ft ( m), and. ft ( m). available. Identification plates welded on each section to designate the type of mast and pin box to stow pins when not in use. Mast nomenclature: K Series of mast with box angled members M Monoblock, non climbing R Reinforced MT Monoblock & climbing RMT Reinforced, monoblock, climbing Equipped with aluminum ladders and galvanized steel resting platforms in each section. Cast connections are secured with two double tapered pins. *Tirax tool and *Tirax pins available for faster easier assembly. Combinations of masts can allow free-standing HUH to increase. * Climbing Equipment Equipment available for both internal climbing and external climbing of both. ft (. m) and. ft ( m) mast. Internal climbing equipment sold separately: 0 HP hydraulic unit, jack, and collars. External climbing equipment sold separately: climbing cage, 0 HP hydraulic unit, yoke, and jack. * Anchor Stools Anchor stools to be used in combination with a concrete foundation. Anchors PA: permanent anchor, maximum free-standing HUH:. ft (. m) on. ft (. m) K mast. Anchors PA: permanent anchor, maximum free-standing HUH:. ft (. m) on. ft ( m) K mast. * Chassis Chassis available with square footprints of. ft (. m) for K00 mast and. ft ( m) for K00 mast. Composed of metallic structures connected with a central mast-chassis and struts for rigidity. A chassis can be placed on either straight or curved traveling equipment or metallic stools embedded into a concrete block. Chassis SA: square footprint of. ft (. m), maximum freestanding HUH:. ft (. m) on. ft (. m) K mast. Chassis V0A: square footprint of. ft ( m), maximum freestanding HUH:. ft (. m) on. ft ( m) K mast. * Cross shaped base Cross shaped bases available with square footprint of. ft (. m). Composed of beams and able to be placed onscrew jacks with support plates, screw jacks with concrete blocks or traveling equipment. Cross ZD 0: square footprint of. ft (. m), maximum free-standing HUH:. ft (. m) on. ft (. m) K mast. Cross ZD : square footprint of. ft (. m), maximum freestanding HUH. ft (. m) on. ft (. m) K mast. * Consult price list for additional options MDT NOTE: The information above is useful as a basic introduction to the crane. In no case may this serve as a substitute for the serial numbered manuals. Dimensions have been rounded to the nearest tenth.

5 component weights (continued) MDT NOTE: The information above is useful as a basic introduction to the crane. In no case may this serve as a substitute for the serial numbered manuals. Dimensions have been rounded to the nearest tenth.

6 dimensions MDT J ft ft ft ft ft. USt ft ft ft. USt 0 ft. USt ft. USt ft ft. USt ft. USt ft USt ft. USt ft. USt. USt. x. ft. x. ft. ft. ft. ft MDT THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

7 load charts MDT J ft 0 0 ft USt ft 0 ft USt 0 ft 0 ft USt ft ft USt ft ft USt ft ft (USt)..... USt. ft ft..... USt USt ft ft (ft)... USt = - 0. USt ft ft. USt ft ft USt ft 0 ft USt 0 ft 0 ft USt ft ft USt ft ft USt ft ft (USt) USt. ft ft..... USt USt ft ft (ft)... USt = - 0. USt ft ft. USt THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. MDT

8 mast & mechanisms MDT J. ft. ft. ft. ft ft. ft. ft. ft ft. ft. ft. ft. ft ft. ft. ft. ft. ft ft. ft. ft. ft..... H = H H = H - ft P A S A ZD 0 ZD B A. ft. ft. ft. ft ft. ft. ft. ft. ft ft. ft. ft. ft. ft. ft ft. ft. ft. ft. ft H = H H = H - ft ZD 0 P A V 0 A ZD ch - PS hp kw LVF 0 ft/min Optima USt ft 0 LVF 0 ft/min Optima USt , ft 0 LVF 0 ft/min GH Optima USt , ft DVF ft/min 0,, RVF tr/min Optima + U/min - rpm 0 0. x, x RT ft/min - B 0 A x x, ZD RT A V S A RT A V R m V 0 A RT A V R m ft/min ft/min ft/min x x, x x, x x, CEI IEC kva 00 V (+% -%) LVF : 0 kva 0 LVF : kva MDT LVF 0 Optima ft/mn + % 0 LVF 0 Optima ft/mn USt... USt... USt NOTE: Illustrated hook heights on this page were determined using FEM.00. Configurations shown may include optional equipment. Other codes may require reductions in configurations. + % 0 LVF 0 GH Optima ft/mn + %

9 dimensions MDT J ft ft ft ft ft USt ft ft ft. USt 0 ft. USt ft. USt ft. USt ft. USt ft. USt ft ft USt ft. USt. USt. x. ft. x. ft. ft. ft. ft THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. MDT

10 load charts MDT J ft ft USt ft ft USt 0 ft 0 ft USt ft ft USt ft ft USt ft ft (USt) USt ft ft.... USt USt ft ft... USt (ft) = - 0. USt ft ft.. USt ft 0 0 ft USt ft 0 ft USt 0 ft 0 ft USt ft ft USt ft ft USt ft ft (USt) USt ft ft USt - 0. USt ft ft.... USt (ft) = - 0. USt ft ft. USt MDT THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

11 mast & mechanisms MDT J. ft. ft. ft. ft ft. ft. ft. ft ft. ft. ft. ft. ft ft. ft. ft. ft. ft ft. ft. ft. ft..... H = H H = H - ft P A S A ZD 0 ZD B A t. ft. ft. ft. ft ft. ft. ft. ft. ft ft. ft. ft. ft. ft. ft ft. ft. ft. ft. ft H = H H = H - ft P A V 0 A ZD B 0 A ZD 0 0 LVF Optima 0 LVF GH Optima ch - PS hp DVF ft/min 0,, RVF tr/min Optima + U/min - rpm 0 0. x, x RT ft/min USt ft/min USt ft/min kw 0 ft 0,0 ft x x, ZD RT A V S A RT A V R m V 0 A RT A V R m ft/min ft/min ft/min x x, x x, x x, CEI IEC kva 00 V (+% -%) 0 LVF : kva 0 LVF Optima - 0 LVF GH Optima ft/mn + % 0... USt NOTE: Illustrated hook heights on this page were determined using FEM.00. Configurations shown may include optional equipment. Other codes may require reductions in configurations. MDT

12 metric dimensions MDT J, m, m, m, m, m t 0 m,0 m m, t m, t 0 m, t, m m 0 m m, t, t, t,, 0 m, t m, t t, m x, m m x m, m, m m MDT THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

13 metric load charts MDT J m,, 0,, m,,,,,,,,,,,,0,,,,,, t 0 m,, 0 0,, m,,,,,,,,,,,,,,, t m,, 0,, 0 m,,,,,,,,,,,, t 0 m,, 0 0,, 0 m,,,,,,,,, t m,, 0 m,,,,,,, t 0 m,, 0 0 m (t),,,, t m,, 0 m,,,, t - 0, t 0 m,, 0 m (m),, t = - 0, t m, m t m,, 0,, m,,,,,,,,,,0,,,,,,, t 0 m,, 0 0,, m,,,,,,,,,,,,,,,,0 t m,, 0, 0, 0 m,,,,,,,,,,,,, t 0 m,, 0 0,, 0 m,,,,,,,,, t m,, 0 0 m,,,,,,, t 0 m,, 0 0 m (t),,,,,, t m,, 0 m,,,, t - 0, t 0 m,, 0 m (m),, t = - 0, t m, m t THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. MDT

14 mast & mechanisms MDT J m, m m m, 0,,,,,,,, m m m, m, 0,, 0,, 0,, 0,,, m m m m, m,,,,,,,, m m m m, m, m m m m,,,,, H = H H = H - 0, m P A S A ZD 0 ZD B A m m, m m,,,,,,,,,,, m, m m m m,,,,,,,,,,,, m m, m m m, m,, m m, m m m,,,,,,,, H = H H = H - 0, m ZD 0 P A V 0 A ZD ch - PS hp kw LVF 0 m/min,, 0,, Optima t 0 0 m 0 LVF 0 m/min,,, Optima t 0 m 0 LVF 0 m/min,, GH Optima t 0 0 m DVF m/min 0,, RVF tr/min Optima + U/min - rpm 0 0, x, x RT m/min, - B 0 A x x, ZD RT A V S A RT A V R m V 0 A RT A V R m m/min m/min m/min - 0-0, - x x, x x, x x, CEI IEC kva 00 V (+% -%) LVF : 0 kva 0 LVF : kva MDT LVF 0 Optima m/mn 0 + % t 0 LVF 0 Optima m/mn t NOTE: Illustrated hook heights on this page were determined using FEM.00. Configurations shown may include optional equipment. Other codes may require reductions in configurations. + % 0 LVF 0 GH Optima m/mn + % t

15 metric dimensions MDT J, m, m, m, m, m t 0 m,0 m m, t m, t 0 m, t, m m 0 m m, t, t, t,, 0 m, t m, t, t, m x, m m x m, m, m m THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. MDT

16 metric load charts MDT J m,, 0,, m,,,,,,,,,,,,,,,,,,, t 0 m,, 0,, 0 0 0,m,,,,,,,,,,,,,,, t m,, 0 0,, 0 0 m,,,,,,,,,,,,, t 0 m,, 0 0,, 0 0 m,,,,,,,,, t m,, 0,, 0 m,,,,,,,,, t 0 m, 0, 0,, 0 m (t),,,,,,, t m, 0, 0 m,,,, t - 0, t 0 m, 0, 0 m,,, t (m) = - 0, t m, 0, m,, t m,, 0,, m,,,,,,,,,,,,,,,,,, t 0 m,, 0,, m,,,,,,,,,,,,,,,, t m,, 0 0,, 0 0 m,,,,,,,,,,,, t 0 m,, 0 0,, 0 0 m,,,,,,,,,,, t m, 0, 0,, 0 m,,,,,,,,,0 t 0 m, 0, 0,, 0 m (t),,,,, t m, 0, 0 m,,,,,, t - 0, t 0 m, 0, 0 m,,,, t (m) = - 0, t m, m,, t MDT THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

17 mast & mechanisms MDT J m, m m m, 0,,,,,,,, m m m, m, 0,, 0,, 0,, 0,,, m m m m, m,,,,,,,, m m m m, m, m m m m,,,,, H = H H = H - 0, m m P A m m, m m,,,,,,,,,,, S A m, m m m m,,,,,,,,,,,, m ZD 0 m, m m m, m,, m ZD m, m m m,,,,,,,, B A H = H H = H - 0, m P A V 0 A ZD B 0 A ZD 0 0 LVF Optima 0 LVF GH Optima ch - PS hp DVF m/min 0,, RVF tr/min Optima + U/min - rpm 0 0, x, x RT m/min t m/min t m/min 0 0 0,,, 0 0 0,,,, -, 0,,, 0,, kw 0 m 0 m x x, ZD RT A V S A RT A V R m V 0 A RT A V R m m/min m/min m/min - 0-0, - x x, x x, x x, CEI IEC kva 00 V (+% -%) 0 LVF : kva 0 LVF Optima - 0 LVF GH Optima m/mn 0 + % 0,, t NOTE: Illustrated hook heights on this page were determined using FEM.00. Configurations shown may include optional equipment. Other codes may require reductions in configurations. MDT

18 symbols glossary Anchor Stools Counter Jib Jib Swing Anemometer Cross-Shaped Base Jib Extension Traveling Ballast Curve Track Traveling Equipment Mast Traversing Trolley Cab Electrical Requirement Reeving -Part Traversing Trolley & Load Diagrams Chassis Hoist Reeving -Part Trolley Climbing Equipment Hoisting Mechanism Straight Track Traveling Equipment Weight in Base Ballast Controls Hydraulic Equipment MDT

19 notes MDT

20 Regional Headquarters Americas Manitowoc, Wisconsin, USA Tel: + 0 Fax: + 0 Shady Grove, Pennsylvania, USA Tel: + Fax: + 0 Europe, Middle East, Africa Ecully, France Tel: + 00 Fax: Asia Pacific Shanghai, China Tel: + Fax: + Singapore Tel: + Fax: + Regional Offices Americas Brazil Alphaville Tel: Fax: + 0 Mexico Monterrey Tel: + 0 Fax: + 0 Europe, Middle East, Africa Algeria Hydra Tel: + Fax: + Czech Republic Netvorice Tel: +0 Fax: +0 France Baudemont Tel: + Fax: + 00 Cergy Tel: + Fax: + 0 Decines Tel: Fax: + 0 Germany Langenfeld Tel: Fax: Hungary Budapest Tel: + Fax: + Italy Parabiago Tel: +0 Fax: +0 0 Netherlands Breda Tel: + Fax: + Poland Warsaw Tel: + Fax: + Portugal Alfena Tel: + 0 Fax: + Lisbon Tel: + 0 Fax: + Russia Moscow Tel: + Fax: + U.A.E. Dubai Tel: + Fax: + U. K. Middlesex Tel: + 00 Fax: + 00 Sunderland Tel: Fax: + 0 Asia Pacific Australia Melbourne Tel: + 0 Fax: + Sydney Tel: + Fax: + China Beijing Tel: + Fax: + 0 Xi an Tel: + Fax: + 0 Korea Seoul Tel: Fax: + 00 Philippines Makati City Tel: + Fax: + Factories Brazil Alphaville China Zhangjiagang France Charlieu La Clayette Moulins Germany Wilhelmshaven India Calcutta Pune Italy Niella Tanaro Portugal Baltar Fânzeres Slovakia Saris U.S.A. Manitowoc Port Washington Shady Grove Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment and price changes without notice. Illustrations shown may include optional equipment and accessories, and may not include all standard equipment MANITOWOC Printed in USA Form No. MDT Part No. 0-0 / 00 /.M