MDT City. Go Topless!
|
|
|
- Warren Reeves
- 5 years ago
- Views:
Transcription
1 MDT City Go Topless!
2 The new MDT City Crane concept Aiming for Productivity 2 The MDT City Crane is so well thought out that you can maximise productivity from your investment without compromising on safety: while in use, during maintenance, during erection and dismantling, or while being transported between sites. Rapid erection and dismantling: - All the electrical connections for the cab, electrical cabinets and slewing motors are factory cabled - Chamfered counter-jib ballast blocks for easy placing - A new cross-shaped base comprised of two arms only Inter-site transportation made easy: - Counter-jib folds back for transportation - A combined cab/pivot unit Plusieurs solutions de transport Excellent productivity during operation Through its performance levels: m m t ,8 40,8 4,5 55,6 3,8 6 1,6 4,5 55,8 8 1, Through drive control: - All mechanisms are equipped with variable frequency, including the latest Optima+ slewing mechanism, which permits a driving mode with counter-slewing. Through the versatility of its design: - To optimise crane fleet operation, interchangeable components such as mast sections, cross-shaped base units, counter-jib ballast blocks and telescoping cages from MD/MDT/MR type cranes can be used. - Standard, interchangeable jib sections. m t
3 1. Assembling the counter-jib on the ground One single section, folded for transportation, with lifting points. A brand new, registered design The counter-jib unfolds rapidly. No locking required Integrated ready-to-fit pin and moment safety device 2. Assembling the jib on the ground 3 Fishplate for centring pin and port to enable quick and easy pinning Maintenance safety rope on each 5 m section Centring of jib sections and wedge-locking of the pins. Quick and simple assembly
4 3. Installation of the cab-mast One single, very compact cab-mast section. A dual-function guardrail protects the cab during transportation. Slinging from 3 points for excellent balance. While packed for transportation, access to the cab and electrical cabinet is not possible. 4 After removal of the guardrail, the cab is rotated manually. Cab rotated and locked in the working position No connections required. The slewing mechanism, electrical cabinet and cab are already cabled in the factory. The electrical cables are all centralised in the tube of the cab-mast. Only the hoist and trolley mechanisms, with their respective safety devices, need to be plugged in. Easy to fit The protective guardrail is now placed on the access platform.
5 4. Erection of the counter-jib Simplified assembly using only 2 pins. These pins are tapered for easier fitting. Balanced slinging points 5 Notches for guiding and centring A self-ballasting frame is available as an option. The ballast blocks are chamfered at the base for easy placing.
6 5. Fitting the jib The jib, following the City concept, is fully assembled and cabled on the ground. The hoist motor at the base of the jib allows the complete cabling of the hoist and trolley mechanisms. The jib is then placed by a mobile crane in one lift. A sufficient number of slinging points for the jib, whatever its length, allows it to be lifted horizontally. As with the counterjib, notches are used to guide and centre the jib. 6 Full view of an MDT City Crane. Remarkable design and elegance.the machine, with its variable height jib, optimises load capacity. The MDT concept improves multiple crane site installations by reducing overflying heights. 6. Final pinning of the jib The pin to be fitted is close by Rotating the connecting link Pin locked into place
7 Options A self-ballasting frame is available as an option. It can be used to complete ballasting without a mobile crane and also for unballasting in particular dismantling situations. 7 Double trolley version. This allows the lifting of heavy loads with coupled trolleys, as well as a heavy load at the end of the jib using only one trolley. Electrical collector. It maintains the electrical connection between the fixed and turning pivot. The number of turns allowed is unlimited (models without a rotation collector are restricted to two turns in each direction). SM/DM version (2 falls/4 falls)
8 The Vision cab and variable frequency mechanisms give a comfortable, ergonomically efficient and productive driving environment. 7. Driving the crane Integrated screens 8 Variable frequency mechanism for flexibility and productivity Variable frequency is controlled by Dialog Pilot, the intelligent dialogue system between man and machine.
9 A 40% increase in window area compared with standard cabs, giving exceptional downward visibility and reduction of blind spots Ergonomically redesigned driving position means that the driver s eyes never have to leave the operating zone. 9
10 Variable frequency is standard on all the movements 8. Mechanisation The LVF Optima (variable frequency hoisting), available in 33 and 50 hp. The DVF (variable frequency trolleying). 10 The RVF (variable frequency slewing) in an Optima+ version. The Optima+ gives two slewing modes. The first for conventional driving. The second allows braking by counter-slewing. Three motors that increase productivity by adding flexibility and precision. 9. Maintenance Derrick comes as standard. Can be mechanised by an auxiliary winch. Maximum load 450 DaN The auxiliary winch (optional) is one method of mechanising the arm.
11 10. Maintenance - Access The catwalk in the jib allows risk-free access beyond the trolley mechanism as far as the jib slinging points. The clearance within the jib at its base allows maintenance personnel to remain upright when passing through. Servicing platform comes as standard. Maintenance of the trolley mechanism is easy and safe. A servicing and inspection catwalk situated on the same side as the cab provides a safe environment for maintenance personnel who remain within the crane driver s field of vision. 11 This catwalk provides maintenance access to the jib trolley in safety and comfort. Jib servicing platform reached from the cab. This area also provides maintenance access to the hoist winch. These accessories provide a safe, comfortable environment for maintenance personnel. They are all supplied as standard with the crane (with the exception of the auxiliary winch).
12 Manitowoc Crane Group - Americas Tel: [Int +001] Fax: [Int +001] Manitowoc Crane Group - Beijing China Tel: [Int +86] (0) Fax: [Int +86] (0) Manitowoc Crane Group - France France & Africa Tel: [Int +33] (0) Fax: [Int +33] (0) Manitowoc Crane Group - Germany Germany & Central Europe Tel: [Int +49] (0) Fax: [Int +49] (0) Manitowoc Crane Group - Italy Italy & Southern Europe Tel: [Int +39] (0) Fax: [Int +39] (0) Manitowoc Crane Group - Middle East (Sales) Tel: [Int +971] (0) Fax: [Int +971] (0) Manitowoc Crane Group - Netherlands Netherlands & North West Europe Tel: [Int +31] (0) Fax: [Int +31] (0) Manitowoc Crane Group - Portugal Portugal & Spain Tel: [Int +351] (0) Fax: [Int +351] (0) Manitowoc Crane Group - Russia Russia - CIS (Sales) Tel: [Int +7] (0) Fax: [Int +7] (0) Manitowoc Crane Group - Shanghai China Tel: [Int +86] (0) Fax: [Int +86] (0) Manitowoc Crane Group - Singapore Asia & Pacific excluding China Tel: [Int +65] Fax: [Int +65] /4142 Manitowoc Crane Group - United Kingdom Tel: [Int +44] (0) Fax: [Int +44] (0) Potain, the world leading tower crane manufacturer Potain, the worldwide leading manufacturer of tower cranes, offers a complete range of 60 models, consisting of top-slewing tower cranes, self-erecting tower cranes, and cranes for special applications. With the backing of a large international network of subsidiaries and distributors, Potain is present on all the construction sites throughout the world, with about 100,000 cranes which have already been sold. Potain is part of the Manitowoc Crane Group, a business unit of The Manitowoc Company. In addition to Potain tower cranes, Manitowoc Crane Group also manufactures Manitowoc Cranes brand lattice-boom crawler cranes, Grove-branded mobile telescopic cranes, National Crane boom trucks and Manlift aerial work platforms. Manitowoc Crane CARE Manitowoc Crane CARE is the Manitowoc Crane Group s unparalleled product support organization. Manitowoc Crane CARE combines all aspects of parts, service, technical documents, technical support and training into one place. The program also includes all of the Manitowoc Crane Group s brands, which include Potain, Grove, Manitowoc, Manlift and National Crane. For the care of your crane and the prosperity of your business, Manitowoc Crane CARE is your single source for customer support. Wherever, whenever, whatever we re there. Manitowoc Crane Group - Americas - World Headquarters th Street Manitowoc WI USA Tel: [Int +001] Fax: [Int +001] Manitowoc Crane Group - Europe, Middle East & Africa Potain S.A.S. 18, rue de Charbonnières B.P ECULLY Cedex FRANCE Tel: [Int +33] (0) Fax: [Int +33] (0) mkt@potain.fr ARTHÉSIS COMMUNICATION MDT City/ENG - 03/ Manitowoc Crane Group - Asia & Pacific Shanghai office Rm 305 Shanghai Mira Commercial Center 2633 West Yan An Road SHANGHAI PR CHINA Tel: [Int +86] Fax: [Int +86]
Maximum productivity even on the most challenging sites.
Igo T Range Maximum productivity even on the most challenging sites www.manitowoccranes.com The Igo T range Successfully combining Power & Productivity Improving site productivity is a daily challenge.
Unequalled kinematics
Unequalled kinematics Logical, ultra-rapid, completely automatic, the HDT is equipped with erection kinematics which guarantee an excellent profitability/security ratio for users. The number of manoeuvres
Potain MDT CITY. Range Brochure. Model Max. load Max. jib Tip load Mast Hoist. MDT98 6 t 55 m 1,2 t to 55 m 3,8-4,5 m 25 & 33 ch
Potain MDT CITY Range Brochure Model Max. load Max. jib Tip load Mast Hoist MDT98 6 t 55 m 1,2 t to 55 m 3,8-4,5 m 25 & 33 ch MDT128 6 t 55 m 1,6 t to 55 m 3,8-4,5 m 25, 33 & 50 ch MDT178 8 t 60 m 1,5
1300 kg (2866 lb) capacity at 40 m (131 ft) 40 m (131 ft) maximum operating hook radius. 44,5 m (146 ft) maximum hook height with jib set at 30
Potain Igo T 70 Product Guide Features 4000 kg (8818 lb) maximum capacity 1300 kg (2866 lb) capacity at 40 m (131 ft) 40 m (131 ft) maximum operating hook radius 44,5 m (146 ft) maximum hook height with
Igo T 85. Preliminary. product guide. contents. features. Features 2. Specifications 3. Transport 4. Weights 5. Dimensions 6.
Preliminary product guide contents Features 2 Specifications 3 Transport 4 Weights 5 Dimensions 6 features 13,228 lb (6 000 kg) maximum capacity 2,756 lb (1 250 kg) capacity at 148 ft (45 m) 148 ft (45
Potain MD. Range. Characteristics. Max. jib: 62,5 à 80,0 m Max. load: 10,0 à 40,0 t Tip load: 2,0 à 5,4 t Mast: 1,60 à 2,45 m Hoist: 33 à 150 LVF
Potain MD Range Characteristics Max. jib: 62,5 à 80,0 m Max. load: 10,0 à 40,0 t Tip load: 2,0 à 5,4 t Mast: 1,60 à 2,45 m Hoist: 33 à 150 LVF Considered to be the parent range to tower cranes, MD cranes
Potain HDT 80 Product Guide
View View thousands thousands of of Crane Crane Specifications Specifications on on FreeCraneSpecs.com FreeCraneSpecs.com Potain HDT 80 Product Guide Features 6000 kg (13,228 ) maximum capacity 1350 kg
Potain Igo 50 Product Guide
Potain Igo 5 Product Guide Features 4 kg (8818 lb) maximum capacity 1 1 kg () capacity at 131 ft (4 m) 4 m (131 ft) maximum operating hook radius 33,8 m (111 ft) maximum hook height with jib set at 2 23,2
MDT 218 product guide
MDT product guide contents Features Specifications Component Weights features Topless jib with maximum radius of ft ( m) Two versions:. USt ( t) and USt ( t), lb ( 0 kg) maximum tip capacity at ft ( m)
MR 418. Data Sheet. - Fleet FEM A3 ASCE USt. 5.5 USt. Values have been rounded. Power Control. Top Tracing II. kva
MR Data Sheet.00A 0. ft. USt. ft 0. ft.0 ft.0 ft.0 ft.0 ft 00. ft.0 ft ft. USt. ft. ft. ft ft. USt. USt ft. USt. USt ft. USt. USt.0 ft x.0 ft.0 ft x.0 ft.0 ft x.0 ft.0 ft x.0 ft Power Control. ft. ft Top
Hup ULTIMATE VERSATILITY. MAX PROFITS.
Hup 40-30 ULTIMATE VERSATILITY. MAX PROFITS. ULTIMATE VERSATILITY. MAX PROFITS. Class leading versatility and performance from a self-erecting crane with 40 m (131 ft) jib. Why own more cranes than you
Potain Igo T 130 Product Guide
Potain Igo T 1 Product Guide Features 8 kg (17,637 ) maximum capacity 1 kg (86 ) capacity at 5 m (16 ) 5 m (16 ) maximum operating hook radius 37,3 m (1 ) maximum tip hook height with jib horizontal 61
Potain Igo T 85 A Product Guide
Potain Igo T A Product Guide Features 6 (13,2 ) axiu capacity 1 (86 ) capacity at (18 ) (18 ) axiu operating hook radius 51 (167 ) axiu hook height with (18 ) jib set at 38 (125 ) axiu tip hook height
Series 1300A. product guide. contents. features. All New Design. Features ' Four-Section Boom. Mounting Configurations 3.
Series product guide features All New Design 110' Four-Section Boom 30 Ton Rating Self-lubricating Easy Glide Wear Pads Internal Anti-twoblock NEW VISION CAB contents Features 2 Mounting Configurations
The 42 K.1 fast-erecting crane. Highly adaptable
The 42 K.1 fast-erecting crane Highly adaptable Flexible and highly adaptable. The 42 K.1 fast-erecting crane has been developed from scratch for use on building sites. It replaces the tried and tested
Series 900A. product guide. contents. features. 103' Four-Section Boom. Features Ton Rating. Self-lubricating Easy Glide Wear Pads
Series 9A product guide features 13' Four-Section Boom 26 Ton Rating Self-lubricating Easy Glide Wear Pads Internal Anti-two-block contents Features 2 Mounting Configurations 3 Specifications 4 Capacities:
National Crane Series 1100
National Crane Series 1100 Product Guide Features ř 25,4 t (28 USt) rating ř 32,0 m (105 ft) four-section boom m ř Self-lubricating Easy Glide wear ar pads Features National Crane 1100 Four-section boom
DESIGNED FOR JOB SITE RESULTS FLAT TOP TOWER CRANE CTT 361
DESIGNED FOR JOB SITE RESULTS FLAT TOP TOWER CRANE CTT 361 FROM OUR EXPERIENCE TO YOUR RESULTS The new Terex Flat Top CTT 361 continues to build on a strong legacy of Terex flat top tower cranes. Designed
Series 400B. product guide. contents. features. 56' Three-section boom. Features Ton rating. Internal anti-two-block. Mounting Configurations 3
Series 4B product guide features 56' Three-section boom 1 Ton rating Internal anti-two-block Self-lubricating Easy Glide wear pads contents Features 2 Mounting Configurations 3 Specifications 4 Capacities:
Series 400B. product guide. contents. features. 56' Three-Section Boom. Features Ton Rating. Internal Anti-two-block. Mounting Configurations 3
Series 4B product guide features 56' Three-Section Boom 1 Ton Rating Internal Anti-two-block Self-lubricating Easy Glide Wear Pads contents Features 2 Mounting Configurations 3 Specifications 4 Capacities:
Series 600E. product guide. contents. features. All New Design. Features 2. 90' Four-Section Boom. 20 Ton Rating. Mounting Configurations 3
Series 6E product guide features All New Design 9' Four-Section Boom 2 Ton Rating Self-lubricating Easy Glide Wear Pads Internal Anti-two-block Auxiliary Stabilizers Variable Displacement Hydraulic System
National Crane Series NBT50
National Crane Series NBT50 Preliminary Product Guide Features 31,1 m (102 ft) four-section full power boom and optional 39,01 m (128 ft) five-section full power boom 45,36 t (50 USt) at 2,44 (8 ft) and
Series 500E. product guide. contents. features. All New Design. Features 2. 71' Three-Section Boom. 18 Ton Rating. Mounting Configurations 3
Series product guide features All New Design 71' Three-Section Boom 18 Ton Rating Self-lubricating Easy Glide Wear Pads Internal Anti-two-block Auxiliary Stabilizers Variable Displacement Hydraulic System
GMK4090 Product Guide
GMK4090 Product Guide ASME B30.5 Imperial 85% Features 90 t (100 USt) capacity 51 m (167 ft) six-section main boom 8,7 m - 15 m (28.5 ft - 49.2 ft) swingaway extension 6 m (19.7 ft) boom extension Single-engine
Grove GMK6350. Product Guide. Features. 15,5 m - 60 m (51 ft ft) five-section full power MEGAFORM boom
Grove GMK6350 Product Guide Features 15,5 m - 60 m (51 ft - 197 ft) five-section full power MEGAFORM boom 11 m - 19 m (36 ft - 62 ft) telescoping offsettable swingaway extension 21 m - 61 m (69 ft - 200
POTAIN lbs ,228 lbs ,228 lbs / lbs / lbs hook height positions 75-2 / 105-8
POTAIN HDT 80 Self-Erecting Crane lifting capacity 13,228 lbs (6 mt) crane height positions 64-8 / 95-2 / 125-8 51-2 / 81-8 / 112-2 44-7 / 75-2 / 105-8 43-8 72-2 7022 lbs. 105-0 4586 lbs. 131-3 3461 lbs.
GMK5150L Product Guide
GMK5150L Product Guide ASME B30.5 Imperial 85% Features 150 t (175 USt) capacity 60 m (197 ft) six-section boom 11,2 m (36 ft) / 17,8 m (58 ft) bi-fold swingaway 8 m (26 ft) boom and 8 m (26 ft) jib extensions
product guide contents features 40 ton (40 mt) Capacity Truck Mounted Crane 29 ft.-95 ft. ( m) 4 section, full power synchronized boom
product guide features ton ( mt) Capacity 29 ft.-95 ft. (8.8-29 m) 4 section, full power synchronized boom 26 ft.- ft. (7.9-13.7 m) offsettable telescopic swingaway extension Optional 8,4 lb. (3837 kg)
model 5500 product guide contents 55 ton Lift Capacity Maximum Load Moment 160' Heavy-Duty Boom on Heavy-Duty Boom 213 HP engine 338 fpm line speed
55 ton ift Capacity ft-kips,28 Maximum oad Moment product guide ' eavy-duty Fixed Jib ' on eavy-duty 23 P engine 338 fpm line speed 35,000 lb Maximum ine Pull lb Material Rehandling 5,0 Clamshell capacity
LC1100. series. Flat-Top System Up to ft/65 m jib range From 5t to 8t maximum load
LC1100 series Flat-Top System Up to 213.2 ft/65 m jib range From 5t to 8t maximum load serieslc1100 LINDEN COMANSA QUALITY In 1977, LINDEN was the first manufacturer to design and produce tower cranes
SERIES. 80 U.S. ton 72.6 metric ton Lattice Boom Crawler Crane
80 U.S. ton 72.6 metric ton Lattice Boom Crawler Crane SERIES Cutting edge winch package with wet brake design and matching front & rear drums 3-piece counterweight system, designed with innovative counterweight
POTAIN lbs ,228 lbs ,228 lbs / lbs / lbs hook height positions 75-2 / 105-8
POTAIN HDT 80 Self-Erecting Crane lifting capacity 13,228 lbs (6 mt) crane height positions 64-8 / 95-2 / 125-8 51-2 / 81-8 / 112-2 44-7 / 75-2 / 105-8 43-8 72-2 7022 lbs. 105-0 4586 lbs. 131-3 3461 lbs.
21 LC 750. Versions with maximum loads of 24, 36 or 48 tonnes Modular Flat-Top system Up to 725 m high with 80 m reach
Versions with maximum loads of 24, 36 or 48 tonnes Modular Flat-Top system Up to 725 m high with 80 m reach 21 LC 75 Model Jib length Free-standing height Maximum load Jib-end load Hoisting power 21LC750
ISO9001 ISO14001 A3 FEM 1.001
ISO9001 ISO14001 A3 FEM 1.001 High-performance, precise-control, very-reliable, energy-saving drive system Frequency-converter Hoist Drive system Most - reliable German made hoist drive system consists
TMS900E. product guide. contents. features 90 ton (80 mton) capacity. Truck Crane ft ( m) 5 section full power boom
features 90 ton (80 mton) capacity 37-142 ft (11.2-43.2 m) 5 section full power boom Patented TWIN-LOCK boom pinning system 33-56 ft (10-17m) bifold lattice swingaway extension Optional 33-56 ft (10-17
National Crane Series NBT50
National Crane Series NBT50 Preliminary Product Guide Features 31,1 m (102 ft) four-section full power boom and optional 39,01 m (128 ft) five-section full power boom 45,36 t (50 USt) at 2,44 (8 ft) and
12 and 48 t (26,450 and 105,820 lb) Flat-Top Effi-Plus
series 5 models with maximum loads between 12 and 48 t (26,450 and 105,820 lb) Flat-Top modular system Effi-Plus high-speed hoisting mechanisms LC2100 series In the 70s, the launch of the LINDEN 8000 modular
28' 6" (8700) 17' 6" (5340) Ra 37' 1" (11 310) R 39' 8" (12 110) R 38' 10" (11 850) Ra 35' 6" (10 840) R 22' 10" (6950) Ra 17' 7" (5355)
Dimensions 17' 6" (5340) 28' 6" (8700) 11' (3360) 9' (2740) R 39' 8" (12 ) Ra 37' 1" (11 310) R 20' 10" (6345) R 18' 4" (55) R 15' 9" (40) 9' 9" (29) 14' 5" (4400) 19' 8" (6000) 27' 11" (8500) R 47' 2"
National Crane Series NBT45
National Crane Series NBT45 Product Guide Features ř 40,8 t (45 USt) rating ř 43,3 m (142 ft) five-section boom ř Self-lubricating Easy Glide wear pads ř 2041 kg (4500 lb) tailswing counterweight Features
130-ton (117.6 mt) Lattice Boom Crawler Crane
130-ton (117.6 mt) Lattice Boom Crawler Crane Transports with crawlers, rope and base 119,200 lbs (54 069 kg) with side frames 73,399 lbs (33 294 kg) without side frames Free-fall wet brake winches w/automatic
Great things come in small packages MK 140 mobile construction crane
Great things come in small packages MK 140 mobile construction crane Technical data VarioJib Trolley mode Luffing mode Max. lifting capacity 8,000 kg Max. radius 58.5 m 65.0 m Max. lifting capacity at
features also available.
features 2 The boom on the is a 29-95 ft. (8.8-29 m) four-section full power boom with a maximum tip height of 2.5 ft. (31.2 m). This synchronized boom uses a single lever joystick control to extend boom
GMK4100L-1 Product Guide ASME B30.5 Imperial 85%
GMK4100L-1 Product Guide ASME B30.5 Imperial 85% Features 100 t (115 USt) capacity 60 m (197 ft) seven-section main boom 11 m - 17.6 m (36 ft - 58 ft) swingaway extension 8 m (26 ft) boom extension Single-engine
Dimensions. Model GMK 5150B equipped with:
Dimensions 50' 4" (15 350) 42' 11-1/2" (13 100) 28' 1" (8575) 48' 7" (14 800) 41' 4 (12 600) 18' 1" (5424) 10' 4" (3151) 9' (2750) 45' 4" *37' 9" (13 800) (11 500) 13' 11" (4255) 24' 7" (7500) *18' 8"
Grove rough-terrain cranes. Features and benefits
Grove rough-terrain cranes Features and benefits Grove is a leading manufacturer of the industry s most reliable cranes. The full line of Grove mobile hydraulic cranes ranges from 8 t to 450 t, (8.5 USt
National Crane 400B Series
National Crane 4B Series Product Guide Features 17,1 m (56 ft) three-section boom 9,1 t (1 USt) rating Self-lubricating Easy Glide wear pads Internal anti-two block Features National Crane Series 4B 9,7
RT875E. product guide. contents
product guide contents Features 2 Specifications 3 Dimensions 5 Working Range 6 Bifold Load Charts 7 features 75 ton (68 mt) capacity 41 ft-128 ft (12.6 m-39.0 m) 4 section, full power boom 33 ft-56 ft
RT875E. product guide. contents
product guide contents Features 2 Specifications 3 Dimensions 5 Working Range 6 Bifold Load Charts 7 features 75 ton (68 mt) capacity 41 ft-128 ft (12.6 m-39.0 m) 4 section, full power boom 33 ft-56 ft
GMK4115. product guide. contents. features. All Terrain Crane. 115-ton (100 mt) capacity. Features 2
product guide features 115-ton (100 mt) capacity 37-171 ft. (11.3-52 m) 6 section full power Mega Form boom with Twin Lock pinning 33-56 ft. (10-17 m) hydraulic offset bi-fold swingaway 2 X 16 ft. (5 m)
RT875E. product guide. contents
product guide contents Features 2 Specifications 3 Dimensions 5 Working Range 6 Bifold Load Charts 7 features 75 ton (68 mt) capacity 41 ft-128 ft (12.6 m-39.0 m) 4 section, full power boom 33 ft-56 ft
View thousands of Crane Specifications on FreeCraneSpecs.com GMK3050. All Terrain Hydraulic Crane
All Terrain Hydraulic Crane Dimensions 13 4 (4058) 6625 21 9 (6625) 8 5 (2567) R 37 7 (11450) Ra 27 9 (8450) R 10 6 (3200) 14 5 (4400) 20 4 (6200) 9 5 (2860) R 25 5 (7750) Ra 18 8 (5700) R 36 9 (11200)
National Crane Series 300C
National Crane Series 3C Product Guide Features 7,3 t (8 USt) rating 14, m (46 ft) three-section boom Self-lubricating Easy Glide wear pads Internal anti-two-block Features National Crane Series 3C 7,3
RT530E-2. product guide. contents. features. Rough Terrain Hydraulic Crane. Features 2. Specifications ton (27 mt) capacity.
RT5E-2 product guide contents Features 2 features ton (27 mt) capacity 29 ft. - 95 ft. (8.8 m -29.0 m) 4-section full power boom 26 ft. - ft. (7.9 m - 13.7 m) offsettable telescopic swing-away extension
National Crane Series NBT15
National Crane Series NBT15 Product Guide Features 13,4 t (15 USt) rating 18,3 m (60 ft) three-section boom Self-lubricating Easy Glide wear pads Internal anti-two block Load sense hydraulics Radio remote
RT600E. product guide. contents
product guide contents Features 2 features 33-5 ft. (-32 m) 4-section full power boom 29-51 ft. (8.8-15.5 m) telescopic swingaway extension Max main boom tip height of 112 ft. (34 m) E Series cab Max overall
Truck Mounted Telescopic Crane LTF Max. capacity: 45 t Max. lifting height: 44 m Max. radius: 42 m
Truck Mounted Telescopic Crane LTF 1045-4.1 Max. capacity: 45 t Max. lifting height: 44 m Max. radius: 42 m Truck mounted telescopic crane LTF 1045-4.1 Economical and flexible With a long telescopic boom
National Crane Series 800H
National Crane Series 8H Data Sheet Features 3,48 m (1 ft) four-section boom 2,86 t (23 USt) rating Self-lubricating Easy Glide wear pads Dimensions 85 mm (31.69") 247 mm (94.") Maximum transport width
YB7700 Series. product guide. contents. features. Industrial Hydraulic Crane. Features 2. Specifications 3. 2 models YB7720 & YB7720XL
YB77 Series product guide features 2 models YB772 & YB772XL 2 ton ( mt) capacity 36 on outriggers @ 1 ft. (3.m) radius 15 ton (13.6 mt) deck carrying capacity 15 ton (13.6 mt) on rubber capacity YB772
RT535E. product guide. contents. features 35 ton (35 mt) capacity. Rough Terrain Hydraulic Crane. Features 2. Specifications 3.
product guide contents Features 2 features 35 ton (35 mt) capacity 32-102 ft. (9.8-31.0 m) 4-section full power boom 26-45 ft. (7.6-13.7 m) offsettable telescopic swingaway extension Dual-Axis electric
Large lifting capacity
Lattice crawler cranes Range brochure metric / imperial Large lifting capacity HC 80 HC 110 HC 165 HC 230 HC 285 CC 2400-1 CC 2800-1 CC 2800-1 NT Superlift 3800 CC 6800 CC 8800-1 CC 8800-1 TWIN 2 DELIVERING
The Manitowoc Company. PRESS BRIEFING April 11, 2016
The Manitowoc Company PRESS BRIEFING April 11, 2016 WELCOME bauma Theme 3 BUILD SOMETHING REAL TM REAL ROI. REAL PERFORMANCE. REAL QUALITY AND RELIABILITY. REAL AGILITY. REAL SUPPORT. 4 Barry Pennypacker
/ / HIGH CAPACITY TELESCOPIC HANDLERS.
/ / HIGH CAPACITY TELESCOPIC HANDLERS www.manitou.com MHT / / MHT m/t MHT m/t MHT m /. T MANITOU, MEETING YOUR DEMANDS FOR OVER YEARS. MANITOU is the only brand able to offer you more than years of experience
Progress as a modular system. EC-H and EC-B cranes.
Progress as a modular system. EC-H and EC-B cranes. The modular-element system offers much greater benefits. Liebherr tower cranes are of modular design so that every crane can be configured to meet individual
RT700E. product guide. contents
product guide contents Features 2 Specifications 3 Dimensions 5 Working Range 6 features -60 ton (-55 mt) capacity 36 ft-110 ft (11 m-33.5 m) 4 section, full power boom 33 ft (10.1 m) offsettable lattice
TMS700E. product guide. contents. features 50 or 60 ton (50 or 55 mt) Capacity. Truck Mounted Hydraulic Crane. Features 2
TMS0E product guide features or ton ( or mt) Capacity 36 ft.-1 ft. (11-33.5 m) 4 section, full power sequenced synchronized boom 33 ft.-56 ft. (.1-17 m) offsettable bi-fold lattice swingaway extension
250 ton (226.8 mt) Lattice Crawler Crane
250 ton (226.8 mt) Lattice Crawler Crane 365 hp Tier III Engine Transport weight is 87,100lbs with carbody, live mast with self assemble cylinder, and hoist rope HSL counterweight removal system, lowers
Large lifting capacity
Lattice crawler cranes Range Brochure metric / imperial Large lifting capacity HC 50 HC 60 HC 80 HC 110 HC 165 HC 230 HC 275 Powerlift 1000 Powerlift 2000 Powerlift 3000 Powerlift 5000 Powerlift 7000 Powerlift
Telescopic Crawler Crane. Max. lifting capacity:220 t Max. lifting height:101 m Max. working radius: 88 m
Telescopic Crawler Crane LTR 1220 Max. lifting capacity:220 t Max. lifting height:101 m Max. working radius: 88 m Telescopic Crawler Crane LTR 1220 Outstanding off road capabilities and manoeuvrability
Series 900A. product guide. contents. features. 103' (31.4 m) Four-Section Boom. Features Ton (23.6 mt) Rating
Series 9A product guide features 13' (31.4 m) Four-Section Boom 26 Ton (23.6 mt) Rating Self-lubricating Easy Glide Wear Pads Internal Anti-two-block contents Features 2 Mounting Configurations 3 Specifications
GMK6300L-1 Product Guide
GMK6300L-1 Product Guide ASME B30.5 Imperial 85% Features 300 t (350 USt) capacity class 15,6 m - 80 m (51 ft - 263 ft) seven-section full power MEGAFORM boom with TWIN-LOCK pinning 12 m - 21 m (39 ft
RT700E. product guide. contents
product guide contents Features 2 Specifications 3 Dimensions 5 Working Range 6 features - ton (-55 mt) capacity 36 ft-1 ft (11 m-33.5 m) 4 section, full power boom 33 ft (.1 m) offsettable lattice swingaway
NEW DATES NEW DATES. GPS Training for Trimble & TOPCON January Excavation & Site Layout January 14 25
Course Dates GPS Training for Trimble & TOPCON January 7 18 Excavation & Site Layout January 14 25 NCCCO practical Training & Testing January 22 24 Introduction to Tower Cranes January 28 February 1 LMI
RT540E. product guide. contents. features. Rough Terrain Hydraulic Crane. Features 2. Specifications 3. Dimensions ton (35 mt) capacity
RT5E product guide contents Features 2 features ton ( mt) capacity 32 ft. - 2 ft. (9.8 m -31.0 m) 4-section, full power boom 26 ft. - ft. (7.9 m - 13.7 m) offsettable telescopic swing-away extension Full
TELESCOPIC HANDLERS.
TELESCOPIC HANDLERS www.manitou.com MT1440 / MT140 MT 1440 14m/4T MT 140 1m/4T 2 MANITOU: AT YOUR SIDE ON ANY CONSTRUCTION SITE When it comes to all-terrain handling, MANITOU has been at your side on all
30' 3-3/8" (9229) RETRACTED 78' (23 796) EXTENDED 10' 11-7/8" (3349) 6' 3" (1905) 1' 11" (587) Note: ( ) Reference dimensions in mm
Dimensions 11' 1-3/8" (3387) TAILSWING 8' 5 1/2" (78) 8' 2" (2489) 18' 6" (5639) EXT 13' (3962) MID EXT 7' 6-3/4" () RET ' 3-3/8" (9229) RETRACTED 78' (23 796) EXTENDED ' 11-7/8" (3349) 6' 3" (1905) 1'
Max. lifting capacity: 60 t Max. lifting height: 55 m Max. working radius: 50 m
Telescopic Crawler Crane LTR 1060 Max. lifting capacity: 60 t Max. lifting height: 55 m Max. working radius: 50 m Telescopic Crawler Crane LTR 1060 Outstanding off road capabilities and manoeuvrability
National Crane Series NBT30H
National Crane Series NBT30H Product Guide Features 27,2 t (30 USt) rating 33,52 m (110 ft) four-section boom All new design Multi-position Easy Reach control panel Graphical LMI Features National Crane
National Crane Series 800D Product Guide ASME B30.5 Imperial 85%
National Crane Series 8D Product Guide ASME B3.5 Imperial 85% Features 2,87 t (23 USt) rating 3,48 m (1 ft) four-section boom Self-lubricating Easy Glide wear pads Internal Anti-Two Block Features National
View thousands of Crane Specifications on FreeCraneSpecs.com. Crawler Crane LR 13000
Crawler Crane LR 13000 1 Crawler Crane LR 13000 A new dimension Strongest crawler crane worldwide in conventional design Maximum capacity 3,000 t Maximum boom configuration 120 m + 126 m Boom system in
20 Ton Cherry Picker. Grove RT58D with Hi Rail Running Gear Load Charts & Specs
Ton Cherry Picker Grove with Hi Rail Running Gear Load Charts & Specs Dimensions 15' 11" (4851) I A C 14' 6" (44) 18' 3" (63) A B C D E F G H I TIRE SIZE (TRACK) (O.A.H) (O.A.W) (60' BOOM) (70' BOOM)
Extremely adaptable The 53 K fast-erecting crane
Extremely adaptable The 53 K fast-erecting crane Technical data Max. lifting capacity Max. radius Max. lifting capacity at the jib head 4,200 kg 40.0 m 1,100 kg The 53 K at a glance Rope erection Low maintenance
Mobile crane LTM Max. lifting capacity: 35 t Max. lifting height: Max. working radius: 40 m. Courtesy of Crane.Market
Mobile crane Max. lifting capacity: 35 t Max. lifting height: 44 m Max. working radius: 40 m Mobile crane Compact and economic 2 A long telescopic boom, high capacities, an extraordinary mobility as well
Truck Mounted Telescopic Crane LTF Max. capacity: 60 t Max. lifting height: 56 m Max. radius: 48 m
Truck Mounted Telescopic Crane LTF 1060-4.1 Max. capacity: 60 t Max. lifting height: 56 m Max. radius: 48 m Truck mounted telescopic crane LTF 1060-4.1 Economical and flexible With a long telescopic boom
Offshore cranes for sale November 2017
1) 20 tons AHC McGregor Knuckle Boom Crane Resale Built : in 2016 PROMPT AVAILABLE Type : HMC 2201 LKO 100 20 (200 10), 2300 m AHC SWL : 20 tons @ 10 mtr / 10 tons @ 20 mtr Wire length : 2300 mtr; wire
series LC3000 SERIES LC3000
LC3000 series Flat-Top tower cranes with maximum loads from 32 to 90 tonnes (70,550 to 198,410 lb) Innovative design for economic transport Easy and fast assembly LC3000 series The LC3000 family, primarily
Dimensions RT750. Note: ( ) Reference dimensions in mm 10' 10-1/2" (3314) 10' 5" (3175) 23' 4" (7112) 17' 4" (5283) 13' 8" (4166) 22' 11" (6985)
Dimensions 10' 10-1/2" (3314) 23' 4" (7112) 17' 4" (5283) 10' 5" (3175) 13' 8" (4166) 22' 11" (6985) 43' 7" (13 284) 5' 9" (1753) 13' 5-1/2" (4104) C ROTATION L 2' 8" (813) 17' 6-1/4" (5342) BOOM OVERHANG
TAILSWING 14' 1-1/2" (4305) 22' 11" (6985) 29.5 x 25 8' 2-1/2" (2502) 12' 5" (3785) 12' 9" (3886) 1' 6-1/2" (470)
View View thousands thousands of of Crane Crane Specifications Specifications on on FreeCraneSpecs.com FreeCraneSpecs.com Dimensions 25' (7620) TAILSWING 14' 1-1/2" (4305) A OAW 10' 11" (3327) 23' (10)
TMS500E. product guide. contents. features 40 ton (40 mt) Capacity. Truck Mounted Crane
product guide features ton ( mt) Capacity 29 ft.-95 ft. (8.8-29 m) 4 section, full power synchronized boom 26 ft.- ft. (7.9-13.7 m) offsettable telescopic swingaway extension Optional 8,4 lb. (3837 kg)
The MK 80 mobile construction crane. The innovative concept.
The MK 80 mobile construction crane. The innovative concept. The MK 80 at a glance. One-person assembly. The MK 80 is designed for one-person assembly at the touch of a button, with pre-selection of the
features Mercedes-Benz OM 502 LA 510 bhp ( rpm 1770 ft./lb. torque ( rpm Daimler Chrysler 16 speed G240-16
features 2 Mercedes-Benz OM 502 LA 510 bhp (380 kw) @ 1800 rpm 1770 ft./lb. torque (2400 Nm) @ 1200 rpm TWIN-LOCK Boom pinning mechanism automatically pins the sections in position using two horizontal
Product Guide. Features
Grove RT5E-2 Product Guide Features Features Boom shape The RT5E-2 incorporates a rectangular boom shape made from 100 k.s.i. steel which eliminates weight and maximizes structural capacities. Tip height
27' 5" (8350) 9' 0" (2750) 18' 5" (5600) 17' 5" (5300) 27' 5" (8350) 43' 6" (13 000) 4' 1" (1250) 5' 5" (1650) 35' 4" (10 100) 44' 2" (13 180)
Dimensions 18' 5" (5600) 27' 5" (8350) 9' 0" (2750) 9' 5" (2860) 20.5R25 15' 8" (4770) 23' 7" (7200) R2 8' 10" (8800) Ra 26' 2" (7980) R 38' 10" (11 850) Ra 34' 3" (10 450) R 35' 0" (10 650) Ra 29' 9"
Grove GHC130. Product Guide. Features. ASME B30.5 Metric 75% and Imperial 75%
Grove GHC130 Product Guide ASME B30.5 Metric 75% and Imperial 75% Features 120 t (132 USt) capacity 12,6 m 40,2 m (41 ft 4 in 131 ft 11 in) four-section full power boom 15 m (49 ft 3 in) offsettable boom
YB5500 Series. product guide. contents. features
product guide features 2 models YB5515: 15.T (13.6mt) 3section boom with 41 ft. in. (12.5m) outreach YB551: 1.T (16.3mt) 4section boom with 54 ft. 6 in. (16.6m) outreach 15 ft. (4.6m) offsettable swingaway
National Crane Series 1300A
National Crane Series 1300A Product Guide ASME B30.5 Imperial 85% Features 27,2 t (30 USt) rating 33,52 m (110 ft) four-section boom Self-lubricating Easy Glide wear pads Internal anti-two-block Vision
LC2100. series. 6 models with maximum loads between 12 and 48 t Flat-Top modular system Double trolley system with automatic reeving change
series 6 models with maximum loads between 12 and 48 t Flat-Top modular system Double trolley system with automatic reeving change LC 2100 In the 70s, the introduction of the LINDEN 8000 series is considered
Mobile crane LTM Max. lifting capacity: 50 t Max. lifting height: 54 m Max. working radius: 44 m
Mobile crane LTM 1050-3.1 Max. lifting capacity: 50 t Max. lifting height: 54 m Max. working radius: 44 m Mobile crane LTM 1050-3.1 Innovative and economical 2 LTM 1050-3.1 The Liebherr LTM 1050-3.1 mobile
Lattice Boom Crawler Crane 50-ton (50 mt)
Lattice Boom Crawler Crane 50-ton (50 mt) 50 tons (50 mt) at an 11' (3.35 m) radius 16,800 lbs (7 620 kg) clam & drag ratings with 70' (21.34 m) of boom 140' (42.67 m) conventional angle boom and 110'
Max. lifting capacity: 100 t Max. lifting height: Max. working radius: 60 m
Telescopic Crawler Crane Max. lifting capacity: 100 t Max. lifting height: 83 m Max. working radius: 60 m Telescopic Crawler Crane Outstanding off-road capabilities and maneuverability 2 A long telescopic
National Crane Series NBT36
National Crane Series NBT36 Product Guide Features 32,7 t (36 USt) rating 38,7 m (127 ft) five-section boom Self-lubricating Easy Glide wear pads Features National Crane Series NBT36 32,7 t (36 USt) maximum