HYDRAULIC CRAWLER CRANE

Size: px
Start display at page:

Download "HYDRAULIC CRAWLER CRANE"

Transcription

1 HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 55 t x m Max. Crane oom Length: 5.8 m Max. Fixed Jib Combination: 4 + m, m Max. ower Jib Combination: m

2 CONFIGURAION Crane oom Max. Lifting Capacity: 55 metric ton x m Max. oom Length: 5.8 m Fixed Jib Max. Lifting Capacity: 7 metric ton x m Max. Combination: 4 m + m, 39.6 m m

3 CONENS Configuration Specifications 3 General Dimensions 5 oom and Jib Arrangements Crane oom Arrangements 7 Fixed Jib Arrangements 7 ower Arrangements 8 ower Jib Arrangements 8 ower Jib Max. Lifting Capacity: 2 metric ton x 0.0 m Max. Combination: 4 m + 2 m Working Ranges and Lifting Capacities Crane oom Working Ranges 0 Crane oom Lifting Capacity Auxiliary Sheave Lifting Capacity for Crane oom Fixed Jib Working Ranges 2 Fixed Jib Lifting Capacities 3 ower Jib Working Ranges 5 ower Jib Lifting Capacities 7 Parts and Attachments 2 2

4 SPECIFICAIONS Power Plant Model:Hino diesel engine J08E-M ype:water-cooled, direct fuel injection, with turbocharger Compiles with NRMM (Europe) Stage IIIA and US EPA ier III. Displacement: liters Rated Power: 59 kw at 2,000 min - {rpm} (ISO) Max. torque: 797 N m/,600 min - Cooling system: Liquid, recirculating bypass Starter: 24 V/ kw Radiator: Corrugated type core, thermostatically controlled Air cleaner: Dry type with replaceable paper element hrottle: Electric throttle control, twist grip type Fuel filter: Replaceable paper element atteries: wo 2 V,36Ah/5HR capacity batteries, series connected. Fuel tank capacity: 400 liters Hydraulic System hree variable displacement piston pumps are driven by heavyduty pump drive. wo of variable displacement pumps are used in the main hook hoist circuit, boom hoist circuit, auxiliary hook hoist circuit, third hoist circuit and each propel circuit. he other is used in the swing circuit. Control: Full-flow hydraulic control system for infinitely variable pressure to front and rear drums, boom hoist brakes and clutches. Controls respond instantly to the touch, delivering smooth function operation. Cooling: Oil-to-air heat exchanger (plate-fin type) Filtration: Full-flow and bypass type with replaceable element Electrical system: All wiring corded for easy servicing, individual fused branch circuits. Max. relief valve pressure: Load hoist, boom hoist and propel system: MPa {325 kgf/cm 2 } Swing system: 27.5 MPa {280 kgf/cm 2 } Control system: MPa {7 kgf/cm 2 } Reservoir capacity: 440 liters oom Hoisting System Powered by a hydraulic motor through a planetary reducer. rake: A spring-set, hydraulically released multiple-disc brake is mounted on the boom hoist motor and operated through a counter-balance valve. Drum lock: External ratchet for locking drum. Drum: Single drum, grooved for 6 mm dia. wire rope. Line speed: Single line on first drum layer Hoisting/Lowering: 70 to 2 m/min Diameter of wire ropes oom guy line: mm oom hoist reeving: 2 parts of 6 mm dia.high strength wire rope oom backstops: elescopic type with spring bumper Required for all boom lengths Load Hoist System Front and rear drums for load hoist powered by a hydraulic variable plunger motors, driven through planetary reducers. rake: A spring-set, hydraulically released multiple-disc brake is mounted on the hoist motor and operated through a counterbalance valve. oth positive and negative brake systems are available. Drum lock: External ratchet for locking drum. Drums: Front drum: 550 mm P.C.D. x 545 mm Lg. wide drum, grooved for 22 mm wire rope. Rope capacity is 75 m working length and 335 m storage length. Rear drum: 550 mm P.C.D. x 545 mm Lg. wide drum, grooved for 22 mm wire rope. Rope capacity is 25 m working length and 335 m storage length. Note: Rope lengths listed above denote drum capacity and may differ from actual rope lengths supplied when machinery is shipped. Line speed: Single line on the first drum layer Hoisting/Lowering: to 3 m/min ower Jib Hoisting/Lowering: 90 to 3 m/min(rear drum) Line Pull: Rated line pull (Single-line): 68.6 kn { tf} Swing System Swing unit is powered by hydraulic motor driving spur gear through planetary reducer, the swing system provides 360 rotation. Swing parking brakes: A spring-set, hydraulically released multiple-disc brake is mounted on swing motor. Swing circle: Single-row ball bearing with an integral internally cut swing gear. Swing lock: Manually, two position lock for transportation Swing speed: min - {rpm} Upper Structure orsion-free precision machined upper frame. All components are located clearly and service friendly. Engine with low noise level. Counterweight: 5.2 ton Additional counterweight: ton Note: Additional counterweight is required when raising or lowering the tower length of 4 m. 3

5 Cab & Control otally enclosed, full vision cab with safety glass, fully adjustable, high backed seat with a head-rest and armrests, and intermittent wiper and window washer (skylight and front window). Cab fittings: Air conditioner, convenient compartment (for tool), cup holder, ashtray, cigarette lighter, sun visor, roof blind, tinted glass, floor mat, foot-rest, shoe tray Controls: Four adjustable levers for front drum, rear drum, boom drum and swing controls Lower Structure Steel-welded carbody with axles. Crawler assemblies can be hydraulically extended for wide-track operation or retracted for transportation. Crawler belt tension is maintained by hydraulic jack force on the track-adjusting bearing block. Crawler drive: Independent hydraulic propel drive is built into each crawler side frame. Each drive consists of a hydraulic motor propelling a driving tumbler through a planetary gear box. Hydraulic motor and gear box are built into the crawler side frame within the shoe width. Crawler brakes: Spring-set, hydraulically released parking brakes are built into each propel drive. Steering mechanism: A hydraulic propel system provides both skid steering (driving one track only) and counter-rotating steering (driving each track in opposite directions). rack rollers: Sealed track rollers for maintenance-free operation. Shoes (flat): 59 shoes, 760 mm wide each crawler Max. travel speed: /.5 km/h Max. gradeability: 40% Weight Including upper and lower machine, 5.2 ton counterweight, basic boom (or basic tower + basic tower jib), hook, and other accessories. Specification Weight Ground pressure Crane boom Approx ton, 7 kpa {0.74 kgf/cm 2 } ower jib Approx ton, 77.3 kpa {0.79 kgf/cm 2 } Attachment oom and Jib: Welded lattice construction using tubular, high-tensile steel chords with pin connections between sections. oom and Jib Length Min. Length Max. Length (Min. Combination) (Max. Combination) Crane oom 9. m 5.8 m Fixed Jib.5 m + 6. m 4 m + m 39.6 m m ower Jib m m 4 m + 2 m Main Specifications (Model: F) Crane oom Max. Lifting Capacity Max. Length Fixed Jib Max. Lifting Capacity Max. Combination ower Jib Max. Lifting Capacity Max. Combination ower Angle Main & Aux. Winch Max. Line Speed Rated Line Pull (Single Line) Wire Rope Diameter Wire Rope Length rake ype Working Speed Swing Speed ravel Speed 55 t/ m 5.8 m 7 t/ m 4 m + m, 39.6 m m 2 t/0.0 m 4 m + 2 m 60 ~ 90 m/min (st layer) 68.6 kn { tf} 22 mm Crane 75 m (Main) 25 m (Aux.) ower 2 m (Main) m (Aux.) Spring-set hydraulically released min - {rpm} /.5 km/h Power Plant Model Hino J08E-M Engine Output 59 kw/2,000 min - {rpm} Fuel ank Capacity 400 liters Hydraulic System Main Pumps 3 variable displacement Max. Pressure MPa {325 kgf/cm 2 } Hydraulic ank Capacity 440 liters Weight Operating Weight* Approx t Ground Pressure* 7 kpa {0.74 kgf/cm 2 } Counterweight 5.2 t ransport Weight** 40.2 t * Including upper and lower machine, 5.2 ton counterweight, basic boom, hook, and other accessories. ** ase machine with boom base, crawlers, gantry, lower spreader, upper spreader, wire ropes for main and boom hoist winches. Units are SI units. {} indicates conventional units. 4

6 GENERAL DIMENSIONS Crane oom (Unit: mm) 5,235,00 R 3,800 6,80 Crane oom Length: 9.m5.8m 940,600 3,0,00,750 3,0 2,875 3,80 4,7 5, ,0 (Retracted) 4,5 (Extended) Limit of Hook Lifting L Hook L 55 t hook m 32 t hook m L' Hook 7t ball hook L' m 9 t hook 3.6 m 5

7 ower Jib (Unit: mm) ower Jib Length: 6.8m2m 5-75 Jib offset Angle is Limited (OVER 5 ) ower Length: m - 4m ower Angle (60-90 ),750,00 6

8 OOM AND JI ARRANGEMENS Crane oom Arrangements oom length m (ft) oom arrangement oom length m (ft) oom arrangement 9. () A (40) 0 3 (0) A 0 0 A 5.2 (50) 8.3 (60) () 0 A A 0 0 A (70) () 0 A 0 A 0 A 2 (80) (40) 45.7 (50) 0 A 0 0 A 0 0 A A 27.4 (90) (60) 0 A (70) 0 0 A.5 (00) 0 0 A A 0 A Symbol 0 A A oom Length 5.2 m m m 6. m 6. m 9. m 9. m Remarks oom ase oom op Insert oom Insert oom Insert oom with Lug Insert oom Insert oom with Lug Fixed Jib Arrangements mark shows the guy line installing position when the fixed jib is used. mark shows the standard boom arrangement which enables each boom length of less than that boom length to be configured. Note:In the following cases a 6. m or 9. m insert boom with lug is required:. With a fixed jib fitted 2. When assembling a boom length of 39.6 m or over without using an auxiliary crane Jib Guy Line: mm Fixed Jib Crane boom length Jib length m (ft) Jib arrangement.5 m 6.() oom Insert oom with Lug 4 m.5 m 39.6 m (40) 8.3 (60) Symbol Jib Length m m 6. m Remarks Jib ase Jib op Insert Jib 7

9 ower Arrangements ower Jib Arrangements ower length m (ft) ower arrangement Jib length m (ft) Jib arrangement (69) (55) (79) (65) (89) (75) 0.2 (99) 0 2 (85) (09) (95) (9) 0 0 Symbol 0 ower Jib Length m 3. m m 6. m Remarks ower Jib ase ower Jib op ower Insert Jib ower Insert Jib 39.3 (29) 4 (39) mark shows the standard tower jib arrangement which enables each tower jib length of less than that jib length to be configured. mark indicates the cable roller install position. Symbol 0 ower Length 5.2 m 0.6 m m 6. m 9. m 9. m Remarks oom ase ower Cap Insert oom Insert oom Insert oom Special Insert oom for ower mark shows the standard tower arrangement which enables each tower length of less than that tower length to be configured. ower and Jib Combinations and Allowable ower Angle ower length Hook Jib Point Weight Jib length m 24. m 27. m.2 m 3 m 36.3 m 39.3 m 4 m 9 ton hook all hook 9 ton hook all hook 6.8 m Need 9.8 m Need 22.9 m m 2 m Pillow plate Add. weight* Need Need Need *Add. weight: Additional weight for self-erection : Available : Not available 8

10 A range of hook blocks can be specified, each with a safety latch. Hooks Hook locks Weight (kg) No. of sheaves No. of lines and max. rated loads (tons) ton ton ton ton ball hook Symbols for Attachments: Crane oom Auxiliary Sheave for Crane oom Fixed Jib ower Jib 9

11 WORKING RANGES AND LIFING CAPACIIES Crane oom Working Ranges m OOM 48.8 m OOM m OOM 4 m OOM m OOM 36.6 m OOM 3 m OOM m OOM 27.4 m OOM 2 m OOM m OOM 8.3 m OOM 5.2 m OOM 35 Height above ground (m) m OOM 9. m OOM.75m. m Radius from center of rotation (m) Center of rotation NOES:. Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc. 2. Ratings in metric tons for 360 working area. 3. Operating radius is the horizontal distance from center of rotation to a vertical line through the center of gravity of the load. 4. Weight of hook block(s), slings and other load handling accessories is included in rated load. heir total weight must be subtracted from rated load to obtain weight that can be lifted. 5. Ratings shown are based on freely suspended loads and make no allowance for such factors as wind effect on lifted load, ground conditions out-of-level, operating speeds or any other condition that could be detrimental to the safe operation of this equipment. Operator, therefore, has the responsibility to judge the existing conditions and reduce lifted loads and operating speeds accordingly. 6. Ratings are for operation on a firm and level surface. 7. At radii and boom lengths where no ratings are shown on chart, operation is not intended nor approved. 8. oom inserts and guy lines must be arranged as shown in the Operator's Manual. 9. oom hoist reeving is 2 part line. 0. Gantry must be in raised position for all conditions.. oom backstops are required for all boom lengths. 2. Crawler frames must be fully extended for all crane operations. 3. Ratings shown in are determined by the strength of the boom or other structural component. 4. Instruction in the Operator's Manual must be strictly observed when operating the machine. 5. Crane boom ratings: Deduct weight of main hook block, slings, and all other load handling accessories from crane boom ratings shown. 6. Auxiliary sheave ratings for crane boom: Deduct weight of ball hook, slings, and all other load handling accessories from auxiliary sheave ratings for crane boom shown. 7. Crane boom lengths for auxiliary sheave mounting are 9. m to 48.8 m. 8. Crane boom ratings with auxiliary sheave: Deduct 0.5 ton from crane boom ratings shown. Minimum rated loads must exceed. ton. 0

12 Crane oom Lifting Capacity Working radius (m) oom length (m) m/ 8 m/ m/ m/ m/ m/ m/ m/ m/ m/ m/ m/ m/ m/ m/ m/ m/ m/ m/.7 Note: Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc. Ratings shown in are determined by the strength of the boom or other structural components. Refer to notes P m/ m/ m/ m/ Unit: metric ton Counterweight: 5.2 t oom length (m) Working radius (m) Auxiliary Sheave Lifting Capacity for Crane oom (With 9 t Main Hook) Working radius (m) oom length (m) m/ 9. m/ 4.3 m/.7 m/ m/ m/ m/ 6.6 m/6. m/ m/ m/ m/ m/ m/ m/ m/ m/ m/ m/.4 Note: Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc. Ratings shown in are determined by the strength of the boom or other structural components. Refer to notes P m/ m/ Unit: metric ton Counterweight: 5.2 t m/ m/ oom length (m) Working radius (m)

13 Fixed Jib Working Ranges Jib Offset Angle: 0, 39.6 m OOM m JI m OOM + m JI 4 m OOM + 6. m JI.5 m OOM m JI 50.5 m OOM + m JI 40.5 m OOM + 6. m JI 80 Height above ground (m) 42.75m.m Radius from center of rotation (m) Center of rotation NOES:. Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc. 2. Ratings in metric tons for 360 working area. 3. Operating radius is the horizontal distance from center of rotation to a vertical line through the center of gravity of the load. 4. Weight of hook block(s), slings and other load handling accessories is included in rated load. heir total weight must be subtracted from rated load to obtain weight that can be lifted. 5. Ratings shown are based on freely suspended loads and make no allowance for such factors as wind effect on lifted load, ground conditions out-of-level, operating speeds or any other condition that could be detrimental to the safe operation of this equipment. Operator, therefore, has the responsibility to judge the existing conditions and reduce lifted loads and operating speeds accordingly. 6. Ratings are for operation on a firm and level surface. 7. At radii and boom lengths where no ratings are shown on chart, operation is not intended nor approved. 8. oom/ jib inserts and guy lines must be arranged as shown in the Operator's Manual. 9. Gantry must be in raised position for all conditions. 0. oom backstops are required for all boom lengths.. Crawler frames must be fully extended for all crane operations. 2. he boom should be erected over the front of crawlers, not laterally. 3. Ratings shown in are determined by the strength of the boom or other structural component. 4. Instruction in the Operator's Manual must be strictly observed when operating the machine. 5. Fixed jib ratings: Deduct weight of jib hook block, slings, and all other load handling accessories from fixed jib ratings shown. 6. Crane boom lengths for fixed jib mounting are.5 m to 4 m. 2

14 Fixed Jib Lifting Capacities (Without Main Hook) Jib Offset Angle: 0 Unit: metric ton Counterweight: 5.2 t oom length (m) oom length (m) Jib length (m) Working radius (m) Jib length (m) Working radius (m) Note: Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc. Ratings shown in are determined by the strength of the boom or other structural components. Refer to notes P2. Jib Offset Angle: Unit: metric ton Counterweight: 5.2 t oom length (m) oom length (m) Jib length (m) Working radius (m) Jib length (m) Working radius (m) Note: Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc. Ratings shown in are determined by the strength of the boom or other structural components. Refer to notes P2. 3

15 4

16 ower Jib Working Ranges ower Length: 36.3 m 70 2 m JI 75 2 m JI 22.9 m JI 9.8 m JI m JI m Height above ground (m) m.m Radius from center of rotation (m) Center of rotation NOES:. Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc. 2. Ratings in metric tons for 360 working area. 3. Operating radius is the horizontal distance from center of rotation to a vertical line through the center of gravity of the load. 4. Weight of hook block(s), slings and other load handling accessories is included in rated load. heir total weight must be subtracted from rated load to obtain weight that can be lifted. 5. Ratings shown are based on freely suspended loads and make no allowance for such factors as wind effect on lifted load, ground conditions out-of-level, operating speeds or any other condition that could be detrimental to the safe operation of this equipment. Operator, therefore, has the responsibility to judge the existing conditions and reduce lifted loads and operating speeds accordingly. 6. Ratings are for operation on a firm and level surface. 7. At radii and boom lengths where no ratings are shown on chart, operation is not intended nor approved. 8. ower/tower jib inserts and guy lines must be arranged as shown in the Operator's Manual. 9. ower jib hoist reeving is 8 part line. 0. Gantry must be in raised position for all conditions.. Crawlers must be fully extended for all crane operations.

17 ower Length: 4 m 2 m JI 2 m JI 22.9 m JI 9.8 m JI m JI 60.5 m Height above ground (m) m. m Radius from center of rotation (m) Center of rotation 0 2. ower and tower jib backstops are required for all tower and tower jib combinations. 3. Ratings shown in are determined by the strength of the tower or other structural component. 4. With a 6.8 m tower jib, a 7-ton ball hook cannot be used. 5. When erecting and lowering the tower length of 39.3 m or over, the pillow plate for erection must be placed at the end of crawlers. 6. For the erection and dismantling of a 4 m tower, an additional weight for erection use ( ton) must be used. Additional weight for self-erection should be removed during crane operation. 7. When using a 9-ton hook with a 6.8 m tower jib, or a 7-ton ball hook with a 9.8 m tower jib, attach a tower jib point weight (0 kg). 8. Instruction in the Operator's Manual must be strictly observed when operating the machine. 9. ower jib ratings: Deduct weight of hook block, slings, and all other load handling accessories from tower jib ratings shown. 6

18 ower Jib Lifting Capacities Unit: metric ton Counterweight: 5.2 t m ower Length ower length (m) Jib length (m) Jib length (m) ower angle m/ m/5.5 m/ m/ m/ 7.5 m/ m/ 2 m/ 28.7 m/ m/ 26.5 m/ m/ 2 2 ower length (m) ower angle m ower Length ower length (m) 24. Jib length (m) Jib length (m) ower angle m/ m/ m/ m/ 2 m/ 7.3 m/ m/ 8.3 m/ m/ m/ 9.8 m/ m/ 27.5 m/ m/ 3 m/.4 m/3..2 m/ 2. 3 m/ ower length (m) ower angle Note: Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc. Ratings shown in are determined by the strength of the tower or other structural components. Refer to notes P5 and P6. 7

19 27. m ower Length ower length (m) 27. Jib length (m) Jib length (m) ower angle m/ m/ m/ 7.3 m/ m/ m/ m/ m/ m/ m/ 2 m/ 27.4 m/ 2 m/ m/ 2 m/ 28.3 m/ m/2. m/ m/.9 m/ m/ 3 m/ m/ m/ Unit: metric ton Counterweight: 5.2 t ower length (m) ower angle m ower Length ower length (m).2 Jib length (m) ower angle m/ m/ m/ m/ m/ 9.8 m/ m/ m/ m/ 8.9 m/ m/ 9.7 m/ m/ m/ m/ 29. m/3. 3. m/ m/ m/.8 3 m/.6. m/ m/ m/ m/ m/ 35.4 m/ m/ m/ Note: Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc. Ratings shown in are determined by the strength of the tower or other structural components. Refer to notes P5 and P6. ower length (m) Jib length (m) ower angle

20 3 m ower Length ower length (m) 3 Jib length (m) ower angle m/ m/ m/ m/ 2.5 m/ m/ m/ m/.6 m/ m/ 2 3 m/ m/. 8. m/ m/ 7.6 m/ m/ m/ m/ m/ 8.9 m/ m/ m/ m/ m/ m/. m/ m/. m/ m/.3 Unit: metric ton Counterweight: 5.2 t ower length (m) Jib length (m) ower angle m ower Length ower length (m) 36.3 Jib length (m) ower angle m/ m/ m/ m/ m/. 7.3 m/ m/ 6.8 m/ m/ 2 2 m/ m/.9 8. m/ m/ 8. m/ m/ m/ m/ m/ m/ 9.4 m/ m/ m/ m/ m/ m/.7 m/ m/ 3. m/ Note: Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc. Ratings shown in are determined by the strength of the tower or other structural components. Refer to notes P5 and P6. ower length (m) Jib length (m) ower angle

21 39.3 m ower Length ower length (m) 39.3 Jib length (m) ower angle m/ m/ m/ 7.3 m/ m/ 7.3 m/ m/ m/ m/ m/ m/ 5.6 m/ m/ m/ m/ 28.6 m/2. 2 m/ m/ m/.7 3 m/ m/.6 m/ m/ 32. m/ m/ m/2.. 3 m/. Unit: metric ton Counterweight: 5.2 t ower length (m) Jib length (m) ower angle m ower Length ower length (m) 4 Jib length (m) ower angle m/ m/ m/ m/ m/ 7.9 m/ m/ m/ m/ m/ m/ m/ m/3.6 2 m/ m/ m/ m/.9 2 m/ m/ 29.7 m/.7 2 m/ m/ m/ 27.6 m/ m/ m/ 35.5 m/ m/ m/ Note: Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc. Ratings shown in are determined by the strength of the tower or other structural components. Refer to notes P5 and P6. ower length (m) Jib length (m) ower angle

22 PARS AND AACHMENS ase Machine With boom base, crawlers, gantry, lower spreader, upper spreader, and wire rope for main & boom hoist winches Weight: 40,0 kg Width: 3,0 mm Insert oom L (mm) Weight (kg)* m 3, m 6, m 9,240 7 *with boom guy cables oom ase Weight: 980 kg Crawler Weight: 6,500 kg Counterweight A Weight: 7,50 kg Counterweight Weight: 7,7 kg oom op Weight:,070 kg (with boom guy cables) 9. m Special Insert oom for ower Weight:,90 kg (with boom guy cables) ower Cap Weight: 600 kg 2

23 Dimensions: mm Weight: kg Jib ase (For Crane) Weight: 25 kg ower Jib ase Weight: 400 kg Jib op (For Crane) Weight: 45 kg ower Jib op Weight: 245 kg Insert ower Jib ower Jib strut Weight: 760 kg L (mm) Weight (kg) m 3, 5 6. m 6,70 95 Other Attachments Attachments Weight Dimensions (L x W x H) 6. m insert boom with lug 540 kg (with guy cables) 6,90 mm x,350 mm x,500 mm 9. m insert boom with lug 750 kg (with guy cables) 9,240 mm x,350 mm x,500 mm 6. m insert jib (for crane) 40 kg 6,60 mm x 675 mm x 625 mm Jib strut (for crane) 90 kg 3,700 mm x 670 mm x 500 mm Auxiliary sheave Upper spreader for boom hoist Upper spreader for tower jib Lower spreader for tower jib 55-ton hook 32-ton hook 40 kg 280 kg 225 kg 335 kg 650 kg 500 kg,325 mm x 540 mm x,285 mm,460 mm x 0 mm x 6 mm 640 mm x 60 mm x 775 mm,350 mm x 450 mm x 9 mm 590 mm x 435 mm x,470 mm 590 mm x 3 mm x,5 mm 9-ton hook 400 kg 590 mm x 385 mm x,270 mm 7-ton ball hook 60 kg ø 0 mm x 85 mm Note: Estimated weights may vary 2%. 22

24 HYDRAULIC CRAWLER CRANE Standard Equipment Upper structure/lower structure Counterweight: 5.2 ton (total weight) 760 mm shoe crawlers atteries (2-2V,36 Ah/5 HR) Gantry raising/lowering cylinder Electric hand throttle grip Variable boom hoist speed controller Variable main/aux. hoist speed controller Swing neutral-free/brake select switch Side deck for cab Steps (crawlers) wo front working lights wo rear view mirrors ools (for routine maintenance) Cable roller (for boom) Upper spreader storage guide Cab Control Air conditioner Luggage box Cup holder Ashtray Cigar lighter Intermittent wiper & window washer (skylight and front window) Sun visor Roof blind Floor mat (cloth) Foot rest Shoe tray Safety Device Load Moment Indicator (with boom lowering slow stop function) LMI release key (for hook over-hoist prevention device and boom over-hoist prevention device) LCD multi display Ultimate stop function for boom over-hoist Function lock lever Propel lever lock Mechanical drum lock pawl (main, aux. and boom hoist) Signal horn Swing parking brake Mechanical swing lock pin (two positions) Swing flashers/warning buzzer Note: Due to our policy of continual product improvements all designs and specifications are subject to change without advance notice. Copyright by KOELCO CRANES CO., LD. No part of this catalog may be reproduced in any manner without notice. 7-, Higashigotanda 2-chome, Shinagawa-ku, okyo JAPAN el: Fax: Inquiries o: KOELCO is the corporate mark used by Kobe Steel on a variety of products and in the names of a number of Kobe Steel Group companies. ulletin No FSPEC-AO 06090IF Printed in Japan

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 70 t x m Max. Crane oom Length: 54.9 m Max. Fixed Jib Combination: 45.7 + 2.2 m 4 + 8.3 m Max. ower Jib Combination: 4 +.5 m CONFIGURAION Crane oom Max. Lifting

More information

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 55 t x m Max. Crane oom Length: 5.8 m Max. Fixed Jib Combination: 4 + m, 39.6 + 8.3 m Max. ower Jib Combination: 4 + 2 m CONFIGURAION Crane oom Max. Lifting

More information

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 250 t x 4.6 m Max. Crane oom Length: 76.2 m Max. Long oom Length: 9.4 m Max. Fixed Jib Combination: 76.2 + 30.5m Max. ower Jib Combination: 64. + 5.8 m CONFIGURAION

More information

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 0 t x m Max. Crane oom Length: m Max. Long oom Length: 79. m Max. Fixed Jib Combination: + 30.5 m Max. Tower Jib Combination: 5.7 + 44. m CONFIGURATION Long

More information

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 90 t x m Max. Crane oom Length: m Max. Fixed Jib Combination: 5 +.3 m Max. ower Jib Combination: 4 + 37. m CONFIGURAION Crane oom Max. Lifting Capacity: 90

More information

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 250 t x 4.6 m Max. Crane Boom Length: 76.2 m Max. Long Boom Length: 9.4 m Max. Fixed Jib Combination: 76.2 + 30.5m Max. ower Jib Combination: 64. + 5.8 m

More information

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 00 t x m* Max. Crane oom Length: m Max. Fixed Jib Combination: m + 8. m *Auxiliary sheave is necessary. CONFIGURAION Crane oom Max. Lifting Capacity: 00 metric

More information

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 90 t x. m* Max. Crane oom Length: m Max. Fixed Jib Combination: m + 8. m *Auxiliary sheave is necessary. CONFIGURAION Crane oom Max. Lifting Capacity: 90

More information

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 0 t x m* Max. Crane oom Length: 70. m Max. Fixed Jib Combination: m +.3 m *Auxiliary sheave is necessary. CONFIGURAION Crane oom Max. Lifting Capacity: 0

More information

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 90 t x m Max. Crane oom Length: m Max. Fixed Jib Combination: m + 8. m CONFIGURAION Crane oom Max. Lifting Capacity: 90 metric ton x m Max. oom Length: m

More information

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 80 t x.0 m Max. Length: 5.9 m Max. Combination: + 8. m 5.7 + m CONFIGURAION Max. Lifting Capacity: 80 metric ton x.0 m Max. oom Length: 5.9 m CONENS Max.

More information

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 250 t x 4.6 m Max. Crane Boom Length: 76.2 m Max. Long Boom Length: 91.4 m Max. Fixed Jib Combination: 76.2 + 30.5m Max. ower Jib Combination: 64.1 + 51.8

More information

HEAVY DUTY BASE MACHINE FOR FOUNDATION WORK

HEAVY DUTY BASE MACHINE FOR FOUNDATION WORK HEAVY DUY ASE MACHINE FOR FOUNDAION WORK Max. Lifting Capacity: 90 t x 4.3 m Max. Crane oom : 62.6 m CONFIGURAION Crane oom Max. Lifting Capacity: 90 metric ton x 4.3 m Max. oom : 62.6 m Clamshell Max.

More information

HEAVY DUTY BASE MACHINE FOR FOUNDATION WORK

HEAVY DUTY BASE MACHINE FOR FOUNDATION WORK HEAVY DUY ASE MACHINE FOR FOUNDAION WORK Max. Lifting Capacity: 00 t x 3.8 m Max. Crane oom : 62.6 m CONFIGURAION Crane oom Max. Lifting Capacity: 00 metric ton x 3.8 m Max. oom : 62.6 m Clamshell Max.

More information

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE G.H. JOHNSON CRANE HIRE LTD. www.johnsonplant.co.uk/hire 01773 51414 HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 135 t x 4.5 m Max. Crane Length: 76. m Max. Long Length: 8.3 m Max. Fixed Jib Combination:

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : 7250S Max. Lifting Capacity: 250 t x 4.6 m Max. Lifting Capacity With ower Jib: 25.0 t x 18.0 m Max. Crane oom Length: 76.2 m Max. Long oom Length: 91.4 m Max. Fixed Jib

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : CKE2500G Max. Lifting Capacity : 250 t x 4.6 m Max. Lifting Capacity With Luffing Jib: 80 t x 9.8 m Max. Crane Boom Length : 91.4 m Max. Luffing Boom Length: 61.0 m Max.

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : BMS1000 Max. Lifting Capacity: 100 t x 3.8 m Max. Crane Boom Length: 62.6 m BMS1000 CONTENTS 3 SPECIFICATIONS 5 6 8 9 10 11 12 13 14 1 GENERAL DIMENSIONS BOOM AND JIB ARRANGEMENTS

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : MS800 Max. Lifting Capacity: 80 t x 3.6 m Max. Crane oom Length: 54.9 m MS800 CONENS 3 SPECIFICAIONS 5 6 7 8 9 11 12 13 14 15 GENERAL DIMENSIONS OOM AND JI ARRANGEMENS

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : CKE900G Max. Lifting Capacity: 0 t x 3.6 m / 90 t x 3.9 m* Max. Crane oom Length : 61.0 m Max. Fixed Jib Combination: 51.8 m + 18.3 m he value are theorical result. * Auxiliary

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : CKE1350G-2 Max. Lifting Capacity : 150 t x 4.4 m * Max. Lifting Capacity With Luffing Jib: 36.0 t x 12.0 m Max. Crane oom Length : 76.2 m Max. Luffing oom Length: 47.9 m

More information

View thousands of Crane Specifications on FreeCraneSpecs.com

View thousands of Crane Specifications on FreeCraneSpecs.com 1 2 SPECIFICAIONS Power Plant Model: HINO J08E-UV ype: 4 cycle, water-cooled, vertical in-line 6, direct injection, turbo-charger, intercooler Complies with US EPA ier Interim ier IV and NRMM (Europe)

More information

SPECIFICATIONS. Power Plant. Load Hoist System. Hydraulic System. Swing System. Boom Hoisting System. Upper Structure.

SPECIFICATIONS. Power Plant. Load Hoist System. Hydraulic System. Swing System. Boom Hoisting System. Upper Structure. 1 2 SPECIFICAIONS Power Plant Model: HINO J08E-UV ype: 4 cycle, water-cooled, vertical in-line 6, direct injection, turbo-charger, intercooler Complies with US EPA ier Interim ier IV and NRMM (Europe)

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : CKE600G Max. Lifting Capacity : 60 t x 3.0 m * Max. Crane oom Length : 51.8 m Max. Fixed Jib Combination: 39.6 m + 18.3 m 42.7 m + 12.2 m * c / w = 11.0 t CKE600G CONENS

More information

SPECIFICATIONS. Power Plant. Load Hoist System. Hydraulic System. Swing System. Boom Hoisting System. Upper Structure.

SPECIFICATIONS. Power Plant. Load Hoist System. Hydraulic System. Swing System. Boom Hoisting System. Upper Structure. 2 SPECIFICAIONS Power Plant Model: HINO J08E-UV ype: 4 cycle, water-cooled, vertical in-line 6, direct injection, turbo-charger, intercooler Complies with US EPA ier Interim ier IV and NRMM (Europe) Stage

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : CKE800G Max. Lifting Capacity : 80 t x 3.0 m Max. Crane Boom Length : 54.9 m Max. Fixed Jib Combination: 42.7 m + 18.3 m 45.7 m + 12.2 m CKE800G CONENS 3 5 6 7 10 11 14

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane G.H. JOHNSON CRANE HIRE LD. www.johnsonplant.co.uk/hire 01773 521414 Hydraulic Crawler Crane Max. Lifting Capacity : 1 t x 3.6 m * Max. Crane oom Length : 70.1 m Max. Fixed Jib Combination: 61.0 m + 21.3

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : CKE1100G Max. Lifting Capacity : 110 t x 3.6 m * Max. Crane Length : 70.1 m Max. Fixed Jib Combination: 61.0 m + 21.3 m * Auxiliary sheave is necessary. CKE1100G CONENS

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : BME800G-2 Max. Lifting Capacity : 80 t x 3.6 m Max. Crane Boom Length : 54.9 m BME800G-2 CONTENTS 3 SPECIFICATIONS 5 6 7 8 9 10 11 12 13 14 17 GENERAL DIMENSIONS BOOM AND

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : CKS900 Max. Lifting Capacity: 0 t x 3.6 m / 90 t x 3.9 m* Max. Crane oom Length: 61.0 m Max. Fixed Jib Combination: 51.8 m + 18.3 m he value are theorical result. * Auxiliary

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : CKS800 Max. Lifting Capacity: 80 t x 3.0 m Max. Crane Length: 54.9 m Max. Fixed Jib Combination: 42.7 m + 18.3 m 45.7 m + 12.2 m CKS800 CONENS 3 5 6 7 10 11 14 15 16 17

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : CKS1100 Max. Lifting Capacity: 110 t x 3.6 m * Max. Crane Length: 70.1 m Max. Fixed Jib Combination: 61.0 m + 21.3 m * Auxiliary sheave is necessary. CKS1100 CONENS 3 5

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : 7120S Max. Lifting Capacity: 120 t x 5.0 m Max. Crane Length: 61.0 m 7120SFS CONTENTS 3 SPECIFICATIONS 5 6 7 8 9 11 12 14 15 17 18 19 20 21 22 24 25 GENERAL DIMENSIONS

More information

HYDRAULIC CRAWLER CRANE CK2500

HYDRAULIC CRAWLER CRANE CK2500 HYDRAULIC CRAWLER CRANE CK2500 WITH OPTIONAL JIB Max. Lifting Capacity: 250 US Tons Max. Boom Length: 300 ft Max. Boom + Jib Length: 250 ft + 100 ft SPECIFICATIONS FOR CK2500 CRAWLER CRANE The Kobelco

More information

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE consolidatedcrane.com Houston, TX 713.641.3330 Max. Lift Capacity: 500,000 lbs Max. Length: 300 ft Max. + Jib Length: 250 ft + 100 ft SPECIFICATIONS FOR CK2500-II CRAWLER CRANE

More information

Max. Lifting Capacity: 100 US Tons Max. Boom Length: 200 ft Max. Boom + Jib Length: 190 ft + 60 ft

Max. Lifting Capacity: 100 US Tons Max. Boom Length: 200 ft Max. Boom + Jib Length: 190 ft + 60 ft HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 100 US Tons Max. Length: 200 ft Max. + Jib Length: 190 ft + 60 ft SPECIFICATIONS FOR CK1000-III CRAWLER CRANE The Kobelco CK1000-III Crawler Crane is designed

More information

TELESCOPIC CRAWLER CRANE Max. Lifting Capacity 75t 3.0m Comply with Japanese Construction Codes for Mobile Cranes.

TELESCOPIC CRAWLER CRANE Max. Lifting Capacity 75t 3.0m Comply with Japanese Construction Codes for Mobile Cranes. 75 Model TK750 TELESCOPIC CRAWLER CRANE Max. Lifting Capacity 75t m Comply with Japanese Construction Codes for Mobile Cranes. kgeneral SPECIFICATION Model Weight Operating weight t Ground pressure kpa{kgf/cm

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic rawler rane Model : MS1200H Max. Lifting apacity: 120 t x 5 m Max. rane oom Length: 61.0 m MS1200H ONENS 3 SPEIFIIONS 5 6 7 8 9 11 12 13 14 15 16 17 21 GENERL IMENSIONS OOM RRNGEMENS WORKING

More information

Hydraulic Crawler Crane. Max. Lifting Capacity : 85 US Tons Max. Crane Boom Length : 200 ft Max. Fixed Jib Combination : 180 ft + 60 ft

Hydraulic Crawler Crane. Max. Lifting Capacity : 85 US Tons Max. Crane Boom Length : 200 ft Max. Fixed Jib Combination : 180 ft + 60 ft Hydraulic Crawler Crane Max. Lifting Capacity : US ons Max. Crane Length : 200 ft Max. Fixed Jib Combination : 1 ft + ft 2 6 7 8 9 10 13 14 15 16 17 20 21 29 31 SPECIFICAIONS G-MODE LMI WINCH PERFORMANCE

More information

Hydraulic Crawler Crane. Max. Lifting Capacity : 110 US Tons Max. Crane Boom Length : 200 ft Max. Fixed Jib Combination : 190 ft + 60 ft

Hydraulic Crawler Crane. Max. Lifting Capacity : 110 US Tons Max. Crane Boom Length : 200 ft Max. Fixed Jib Combination : 190 ft + 60 ft Hydraulic Crawler Crane Max. Lifting Capacity : 1 US ons Max. Crane Length : 200 ft Max. Fixed Jib Combination : 190 ft + 60 ft 2 6 7 8 9 13 14 15 16 17 20 21 29 32 SPECIFICAIONS G-MODE LMI WINCH PERFORMANCE

More information

MODEL CKE2500-II TON CAPACITY

MODEL CKE2500-II TON CAPACITY LIFTING CHARTS - Crawler Cranes KOBELCO MODEL - 275 TON CAPACITY Luffing Jib Working Ranges Boom Angle: 88 125 54.9 m 51.8 m 48.8 m 45.7 m 42.7 m 39.6 m 3 m 33.5 m 30.5 m 57.9 m 120 115 110 105 100 95

More information

Hydraulic Crawler Crane. Max. Lifting Capacity : 80 US Tons Max. Crane Boom Length : 200 ft Max. Fixed Jib Combination : 180 ft + 60 ft

Hydraulic Crawler Crane. Max. Lifting Capacity : 80 US Tons Max. Crane Boom Length : 200 ft Max. Fixed Jib Combination : 180 ft + 60 ft Hydraulic Crawler Crane - Max. Lifting Capacity : US ons Max. Crane Length : 200 ft Max. Fixed Jib Combination : 1 ft + ft 2 6 7 8 9 10 13 SPECIFICAIONS G-MODE LMI WINCH PERFORMANCE GENERAL DIMENSIONS

More information

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE CRANE BOOM Max. Lifting Capacity: 70 tons 3.1 m Max. Boom Length: 54.9 m FIXED JIB Max. Lifting Capacity: 6.6 tons 20.0 m Max. Fixed Jib Combinations: 42.7 m 18.3 m 45.7 m 12.2

More information

NEW RK SERIES. Model: RK350-2 ROUGH TERRAIN CRANE RK350. Max. Lifting Capacity: 35 tons x 3.0 m Max. Boom Length: 35.0 m

NEW RK SERIES. Model: RK350-2 ROUGH TERRAIN CRANE RK350. Max. Lifting Capacity: 35 tons x 3.0 m Max. Boom Length: 35.0 m NEW RK SERIES Model: RK350-2 ROUGH TERRAIN CRANE RK350 S P E C I F I C A T I O N S Max. Lifting Capacity: 35 tons x 3.0 m Max. Boom Length: 35.0 m 341 SPECIFICATIONS UPPER STRUCTURE SWING UNIT A hydraulic

More information

NEW RK SERIES ROUGH TERRAIN CRANE RK500. Max. Lifting Capacity: 51 tons x 2.9 m Max. Boom Length: 39.0 m

NEW RK SERIES ROUGH TERRAIN CRANE RK500. Max. Lifting Capacity: 51 tons x 2.9 m Max. Boom Length: 39.0 m NEW RK SERIES ROUGH TERRAIN CRANE S P E C I F I C A T I O N S Max. Lifting Capacity: 51 tons x 2.9 m Max. Boom Length: 39.0 m 369 SPECIFICATIONS UPPER STRUCTURE SWING UNIT A hydraulic piston motor drives

More information

SCX550E SCX550E HYDRAULIC CRAWLER CRANE T.EA0273

SCX550E SCX550E HYDRAULIC CRAWLER CRANE T.EA0273 SCX550E SCX550E HYDRAULIC CRAWLER CRANE 1804 01T.EA0273 SCX550E VARIATION Variation of The Attachment Line Speed * Front / Rear Winch 75 m/min Boom Hoist Winch 62 Swing Speed min -1 (rpm) 3.7 Travel Speed

More information

HYDRAULIC CRAWLER CRANE CK2000 SPECIFICATIONS & LIFTING CAPACITIES

HYDRAULIC CRAWLER CRANE CK2000 SPECIFICATIONS & LIFTING CAPACITIES HYRULI RWLR RN K00 SPIFIIONS & LIFING PIIS Max. Lifting apacity: 400,000 lbs. Max. oom Length: 280 ft Max. oom + Jib Length: 240 ft + 100 ft SPIFIIONS FOR K00 RWLR RN he Kobelco K00 rawler rane is designed

More information

Fully Hydraulic Crawler Crane

Fully Hydraulic Crawler Crane Fully Hydraulic Crawler Crane Max. Lifting Capacity : 50t Max. Boom Length : 5m Max. Jib Combination : 4m + 5m General dimensions (with basic boom) (Unit : mm) Main specifications Performance Slewing speed

More information

Fully Hydraulic Crawler Crane

Fully Hydraulic Crawler Crane Fully Hydraulic Crawler Crane Max. Lifting Capacity : 0t Max. Boom Length : 75m Max. Jib Combination : 63m + 5m General dimensions (with basic boom) (Unit : mm) Main specifications Performance Slewing

More information

CRAWLER CRANE. Dimensions. Specifications. Unit: mm. Notes: Dimensions shown in ( ) are with crawlers fully retracted.

CRAWLER CRANE. Dimensions. Specifications. Unit: mm. Notes: Dimensions shown in ( ) are with crawlers fully retracted. CRAWLER CRANE Dimensions Unit: mm Notes: Dimensions shown in ( ) are with crawlers fully retracted. Specifications Maximum Lifting load Load radius ton m 40 3.7 Basic boom length m 10 Maximum boom length

More information

View thousands of Crane Specifications on FreeCraneSpecs.com. 100 ton. Kobelco CK1000 Crawler Crane Load Charts & Specifications

View thousands of Crane Specifications on FreeCraneSpecs.com. 100 ton. Kobelco CK1000 Crawler Crane Load Charts & Specifications 100 ton Kobelco K1000 rawler rane harts & Specifications GENERL IMENSIONS Unit: ft-in(mm) 17 1 (5,7) R14 6 (4,430) 11 3 6 8 (2,034) 3 7 (1,100) 3 (6,179) 11 4 (3,450) 4 11 (1,505) 3 8 (1,109) 5 9 (1,750)

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : S00G Max. ifting Capacity : 00 t x. Max. Crane Boo ength : Max. uffing Jib Cobination: + CONFIGURATION STD ong Boo SH uffing Boo Max. ifting Capacity: 113. etric tons x.0

More information

model 5500 product guide contents 55 ton Lift Capacity Maximum Load Moment 160' Heavy-Duty Boom on Heavy-Duty Boom 213 HP engine 338 fpm line speed

model 5500 product guide contents 55 ton Lift Capacity Maximum Load Moment 160' Heavy-Duty Boom on Heavy-Duty Boom 213 HP engine 338 fpm line speed 55 ton ift Capacity ft-kips,28 Maximum oad Moment product guide ' eavy-duty Fixed Jib ' on eavy-duty 23 P engine 338 fpm line speed 35,000 lb Maximum ine Pull lb Material Rehandling 5,0 Clamshell capacity

More information

CK1300 III KOBELCO HYDRAULIC CRAWLER CRANE. Max. Lifting Capacity: 80 US Tons Max. Boom Length: 200 ft Max. Boom + Jib Length: 180 ft + 60 ft

CK1300 III KOBELCO HYDRAULIC CRAWLER CRANE. Max. Lifting Capacity: 80 US Tons Max. Boom Length: 200 ft Max. Boom + Jib Length: 180 ft + 60 ft KOBELCO HYDRAULIC CRAWLER CRANE CK300 III Max. Lifting Capacity: 80 US Tons Max. Boom Length: 200 ft Max. Boom + Jib Length: 80 ft + 60 ft, M w.47474:.. 4...dtrIFTFAMTPAMMIAMPIIATAITOir:%* SPECIFICATIONS

More information

CRAWLER CRANE. Dimensions. Specifications. Unit: mm. Notes : Dimensions shown in ( ) are with crawlers fully retracted.

CRAWLER CRANE. Dimensions. Specifications. Unit: mm. Notes : Dimensions shown in ( ) are with crawlers fully retracted. CRAWLER CRANE Dimensions Unit: mm Specifications Model SCX400 Maximum Lifting Load Load Radius ton m 40 3.7 Basic Boom Length m 10 Maximum Boom Length m 46 Main/Aux. Hoisting Wire Rope Speed m/min * 74

More information

CRAWLER CRANE. Dimensions. Specifications. Unit: mm. (1 t = kg)

CRAWLER CRANE. Dimensions. Specifications. Unit: mm. (1 t = kg) CRAWLER CRANE Dimensions Unit: mm Figure in ( ) shows dimension when side frames are retracted for trailer transport Specifications Maximum rated Load Working radius t m 55 3.7 Basic boom length m 10 Maximum

More information

Dimensions Specifications

Dimensions Specifications CRAWLER CRANE Dimensions Specifications...3 Superstructure...4 Working Ranges...8 Crane Ratings (Main Boom in 360 Working Area)...9 Crane Ratings (Jib in 360 Working Area)...10 to 11 Crane Boom Construction

More information

Fully Hydraulic Crawler Crane. Lifting Capacity 280 metric tons

Fully Hydraulic Crawler Crane. Lifting Capacity 280 metric tons Fully Hydraulic Crawler Crane Lifting Capacity 80 metric tons CCH800 General Dimensions (with basic boom) (Unit : mm) Specifications Performance Swing speed.7rpm Travel speed 0.9/0.5 km/hr Gradeability

More information

TADANO ROUGH TERRAIN CRANE : GR-700EX. (Left-hand steering) G E N E R A L D ATA

TADANO ROUGH TERRAIN CRANE : GR-700EX. (Left-hand steering) G E N E R A L D ATA SPEC. SHEET No. GR-7E-1-214/EU-51 DATE June, 21 TADANO ROUGH TERRAIN CRANE MODEL : GR-7EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY BOOM 7, kg at 3. m 5-section, 11.5 m 44. m DIMENSION Overall

More information

Mechanical Truck Crane 6350-TC

Mechanical Truck Crane 6350-TC Mechanical Truck Crane 6350-TC 47 1. GENERAL Type: Truck mounted, fully revolving Max. lifting capacity: 210,000 kg (21.34 m heavy duty boom, at operating radius 7.0 m) Working weight: Approx. 246 metric

More information

General Dimensions (with basic boom) (Unit : mm)

General Dimensions (with basic boom) (Unit : mm) General Dimensions (with basic boom) (Unit : mm) Specifications Performance Swing speed.4rpm Travel speed.0/0.5 km/hr Gradeability 30% (6.7º) Engine Make Cummins Inc. Model QSM Type 4-cycle,6-cylinder,water-cooled,turbo-charged

More information

TADANO ROUGH TERRAIN CRANE : GR-300EX. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m

TADANO ROUGH TERRAIN CRANE : GR-300EX. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m TADANO ROUGH TERRAIN CRANE MODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION MASS Overall length approx. 11,245 mm Overall width

More information

Fully Hydraulic Crawler Crane

Fully Hydraulic Crawler Crane Fully Hydraulic Crawler Crane Lifting Capacity 0 metric tons General Dimensions (with basic boom) (Unit : mm) Specifications Performance Swing speed Travel speed Gradeability Engine Make Model Crane specifications

More information

TADANO TRUCK CRANE. Provisional Specifications GENERAL DATA. 4-section, 10.5 m 33.0 m

TADANO TRUCK CRANE. Provisional Specifications GENERAL DATA. 4-section, 10.5 m 33.0 m DATE July, 2006 TADANO TRUCK CRANE MODEL : TL-300E Provisional Specifications GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 10.5 m 33.0 m DIMENSION MASS Overall length approx. 12,670 mm

More information

TADANO ROUGH TERRAIN CRANE : GR-550EX. (Left-hand steering) G E N E R A L D ATA

TADANO ROUGH TERRAIN CRANE : GR-550EX. (Left-hand steering) G E N E R A L D ATA DATE June, 21 TADANO ROUGH TERRAIN CRANE MODEL : GR-55EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42.m DIMENSION Overall length Overall width Overall

More information

TADANO ROUGH TERRAIN CRANE. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m

TADANO ROUGH TERRAIN CRANE. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m DATE July, 2004 TADANO ROUGH TERRAIN CRANE MODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION Overall length approx. 11,245 mm

More information

ROUGH TERRAIN CRANE GR-250N

ROUGH TERRAIN CRANE GR-250N ROUGH TERRAIN CRANE GR-250N JAPANESE SPECIFICATIONS GR OUTLINE 4-section Boom, 2-staged Standard Jib X-type Outrigger SPEC. NO. GR-250N-1-00103 Control No. GR-250N-1-00103 / JA-04-1 - GR-250N CRANE SPECIFICATIONS

More information

HYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-300E /EX-41. Left hand steering CRANE CAPACITY

HYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-300E /EX-41. Left hand steering CRANE CAPACITY HYDRAULIC ROUGH TERRAIN CRANE GR-300EX Left hand steering GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION Overall length approx. 11,245 mm Overall width approx.

More information

MODEL : GT-550EX EURO-2

MODEL : GT-550EX EURO-2 DATE February, 2007 TADANO TRUCK CRANE MODEL : GT-550EX EURO-2 GENERAL DATA CRANE CAPACITY 55,000 kg at 3.0 m BOOM 5-section, 11.1 m 42.0 m DIMENSION MASS Overall length approx. 13,480 mm Overall width

More information

Ground bearing pressure 1.14 kg/cm 2. Main boom (No xx) max. length High reach (1311.xx and 1008.xx) 83 m Luffing jib (No xx) max.

Ground bearing pressure 1.14 kg/cm 2. Main boom (No xx) max. length High reach (1311.xx and 1008.xx) 83 m Luffing jib (No xx) max. The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 14 m main boom, consisting of A frame, boom foot (5.5 m), boom head (8.5 m), 32.3 t basic counterweight, 15 t carbody

More information

Table of Contents. Boom. Power Jib. Boom. (Stationary on rubber) Boom. (Pick & Carry) Searcher hook. (Option)

Table of Contents. Boom. Power Jib. Boom. (Stationary on rubber) Boom. (Pick & Carry) Searcher hook. (Option) Power Jib (Stationary on rubber) (Pick & Carry) Searcher hook (Option) Searcher hook (Stationary on rubber)(option) Searcher hook (Pick & Carry)(Option) Table of Contents SPECIFICATION 1 Notes for the

More information

HYDRAULIC TRUCK CRANE GT-600EX CARRIER : TC section, 11.0 m 43.0 m DIMENSION Overall length. approx. 13,170 mm Overall width

HYDRAULIC TRUCK CRANE GT-600EX CARRIER : TC section, 11.0 m 43.0 m DIMENSION Overall length. approx. 13,170 mm Overall width HYDRAULIC TRUCK CRANE SPEC. SHEET NO. GT-6E-1-31/EX-2 GT-6EX CARRIER : TC-42-2 GENERAL DATA CRANE CAPACITY 6, kg at 3. m BOOM 5-section, 11. m 43. m DIMENSION Overall length approx. 13,17 mm Overall width

More information

C R A N E SPECIFICATIONS MODEL GR-1450EX CAPACITY 145,000 kg at 2.5 m BOOM 6 sections extended by single telescoping cylinder, 13.1m~61.0m, of round b

C R A N E SPECIFICATIONS MODEL GR-1450EX CAPACITY 145,000 kg at 2.5 m BOOM 6 sections extended by single telescoping cylinder, 13.1m~61.0m, of round b TADANO ROUGH TERRAIN CRANE MODEL : GR-1450EX - Hydraulic offset jib model - (Left-hand steering) G E NERAL D ATA CRANE CAPACITY 145,000 kg at 2.5 m BOOM 6-section, 13.1 m 61.0 m DIMENSION MASS Overall

More information

ROUGH TERRAIN CRANE TR-160M

ROUGH TERRAIN CRANE TR-160M ROUGH TERRAIN CRANE TR-160M JAPANESE SPECIFICATIONS TR OUTLINE 6-section Boom, 1-staged Jib H-type Outrigger SPEC. NO. Control No. JA-0 39 TR-160M CRANE SPECIFICATIONS CRANE CAPACITY 6.5m Boom 16,000kg

More information

FULLY HYDRAULIC TRUCK CRANE

FULLY HYDRAULIC TRUCK CRANE CRANE Description Model Specification Maximum rated lifting capacity length Fly jib length Maximum lifting height Main Hoisting line winch speed Auxiliary winch Main Hoisting winch speed Auxiliary winch

More information

GT-550E. 55 Metric Tons Capacity EURO-2 HYDRAULIC TRUCK CRANE DIMENSION. Spec. sheet No. GT-550E /C-70

GT-550E. 55 Metric Tons Capacity EURO-2 HYDRAULIC TRUCK CRANE DIMENSION. Spec. sheet No. GT-550E /C-70 GT-550E 55 Metric Tons Capacity EURO-2 HYDRAULIC TRUCK CRANE DIMENSION TAIL SWING R3650 MIN 2390 2720 2820 MID 4600 REAR AXLE CENTER 290 2110 MAX 0 400 5480 MIN. 11100 - MAX. 42000 3 SIDE REFL 2650 SIDE

More information

6. Working radii are measured from centre of swing and under load.

6. Working radii are measured from centre of swing and under load. The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 20 m main boom, consisting of A frame, boom foot (7 m), boom head (7 m), boom extension (6 m), 60.6 t basic counterweight,

More information

Ground bearing pressure 1.08 kg/cm 2. Main boom (No xx) max. length High reach (No xx and 1309.xx)

Ground bearing pressure 1.08 kg/cm 2. Main boom (No xx) max. length High reach (No xx and 1309.xx) The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 17 m main boom, consisting of A frame, boom foot (7 m), boom head (10 m), 50.9 t basic counterweight, 20 t carbody

More information

5. For max. wind speed please refer to lift chart in operator s cab or manual.

5. For max. wind speed please refer to lift chart in operator s cab or manual. The operating weight includes the basic machine with crawlers, 2 main winches 120 kn including wire ropes (260 m and 495 m) and 20 m main boom, consisting of A frame, boom foot (10 m), boom head (7 m),

More information

TADANO ROUGH TERRAIN CRANE. (Right-hand steering) GENERAL DATA. 6-section, 5.3 m m

TADANO ROUGH TERRAIN CRANE. (Right-hand steering) GENERAL DATA. 6-section, 5.3 m m DATE February, 2009 TADANO ROUGH TERRAIN CRANE MODEL : GR-120NL (Right-hand steering) GENERAL DATA CRANE CAPACITY BOOM 12,000 kg at 2.0 m 6-section, 5.3 m - 23.8 m DIMENSIONS Overall length approx. 7,540

More information

ROUGH TERRAIN CRANE SPECIFICATION. Engine. Type. Transmission. Axles. Suspension. Brake system. Steering. Tire size.

ROUGH TERRAIN CRANE SPECIFICATION. Engine. Type. Transmission. Axles. Suspension. Brake system. Steering. Tire size. ROUGH TERRAIN CRANE CRANE Specifi cation Maximum lifting capacity 70ton 2.5m length (6 section) Fly jib length 8.3m-13.2m (2 section, offset 7 60 ) Maximum rated lifting height 45.5m () 58.6m (jib) Hoisting

More information

HYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-500E /EX-02. Left hand steering CRANE CAPACITY

HYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-500E /EX-02. Left hand steering CRANE CAPACITY HYDRAULIC ROUGH TERRAIN CRANE GR-500EX Left hand steering GENERAL DATA CRANE CAPACITY 50,000 kg at m BOOM 4-section, 10.7 m - 34.7 m DIMENSION Overall length approx. 13,055 mm Overall width approx. 2,980

More information

ROUGH TERRAIN CRANE GR-500N

ROUGH TERRAIN CRANE GR-500N ROUGH TERRAIN CRANE GR-500N JAPANESE SPECIFICATIONS GR OUTLINE 6-section Boom, 2-staged Full Auto Jib X-type Outrigger SPEC. NO. GR-500N-1-00101 Control No. GR-500N-1-00101 / JA-03-1 - Return to index

More information

SPEC. SHEET No. GR-800E /EU-01 DATE November, 2012 TADANO ROUGH TERRAIN CRANE M ODEL : GR-800EX (Left-hand steering) G E N E R A L D ATA CRANE

SPEC. SHEET No. GR-800E /EU-01 DATE November, 2012 TADANO ROUGH TERRAIN CRANE M ODEL : GR-800EX (Left-hand steering) G E N E R A L D ATA CRANE DATE November, 212 TADANO ROUGH TERRAIN CRANE M ODEL : GR-8EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY 8, kg at 3. m BOOM 5-section, 12. m 47. m DIMENSION Overall length approx. 14,375 mm

More information

ROUGH TERRAIN CRANE. Table of contents SPECIFICATION 1 LIFTING CAPACITIES. Stationary on rubber 2 Pick & carry m Boom+10.

ROUGH TERRAIN CRANE. Table of contents SPECIFICATION 1 LIFTING CAPACITIES. Stationary on rubber 2 Pick & carry m Boom+10. ROUGH TERRAIN CRANE Table of contents SPECIFICATION 1 LIFTING CAPACITIES 2 Stationary on rubber 2 Pick & carry 2 17.5m +6.5m SL Jib 3 17.5m +10.25m SL Jib 3 17.5m +14.0m SL Jib 3 32.5m +6.5m SL Jib 5 32.5m

More information

650TLX HYDRAULIC CRAWLER CRANE

650TLX HYDRAULIC CRAWLER CRANE 50TLX HYDRAULIC CRAWLER CRANE 1804 01T.EA319 50TLX VARIATION Variation of The Attachment Line Speed * Front / Rear Winch 105 m/min Third Winch (Optional) 105 Boom Raising Speed* sec/degree 52 / 0 to 78.0

More information

GT-550E 55 Metric Tons Capacity

GT-550E 55 Metric Tons Capacity GT-55E 55 Metric Tons Capacity EURO-2 HYDRAULIC TRUCK CRANE Spec. sheet No. GT-55E-1-132/EX-5 DIMENSIONS MIN. 111 - MAX. 42 368 SIDE REFL (RED) 265 CENTER LIGHT 14 o 85 REFL 24 12 o 124 SIDE TURN 39 62

More information

SPECIFICATION. CRANE Specification. CARRIER Specification

SPECIFICATION. CRANE Specification. CARRIER Specification CRANE Specification Description Model KATO FULLY HYDRAULIC ALL TERRAIN CRANE KA-1300SL Maximum lifting capacity 130ton 2.5m Boom length 11.8m 52.0m (6 section) SL jib length 9.2m-26.6m ( section) Hoisting

More information

Table of Contents. Boom. Power Jib. Boom. (Stationary on rubber) Boom. (Pick & Carry) Searcher hook. (Option)

Table of Contents. Boom. Power Jib. Boom. (Stationary on rubber) Boom. (Pick & Carry) Searcher hook. (Option) Boom Power Jib Boom (Stationary on rubber) Boom (Pick & Carry) Searcher hook (Option) Searcher hook (Stationary on rubber)(option) Searcher hook (Pick & Carry)(Option) Table of Contents SPECIFICATION 1

More information

ROUGH TERRAIN CRANE GR-350N

ROUGH TERRAIN CRANE GR-350N ROUGH TERRAIN CRANE GR-350N (5-section Boom, 2-staged Power Tilt Jib, X-type Outrigger) JAPANESE SPECIFICATIONS GR SPEC. NO. GR-350N-1-00101 GR-350N-1-00102 OUTLINE Winch without free-fall device Winch

More information

ASIAN ISSUE. View thousands of Crane Specifications on FreeCraneSpecs.com

ASIAN ISSUE. View thousands of Crane Specifications on FreeCraneSpecs.com ASIAN ISSUE Hitachi Sumitomo Heavy Industries Construction Crane Co., Ltd. 9-3, Higashi Ueno 6-chome, Taito-ku, Tokyo 110-0015, Japan Telephone : 81-3-3845-1387 Facsimile : 81-3-3845-1394 URL: www.hsc-crane.com

More information

ROUGH TERRAIN CRANE GR-160N

ROUGH TERRAIN CRANE GR-160N ROUGH TERRAIN CRANE GR-160N JAPANESE SPECIFICATIONS GR OUTLINE X-type Outrigger SPEC. NO. GR-160N-1-00101 Control No. GR-160N-1-00101 / JA-01-1 - GR-160N CRANE SPECIFICATIONS CRANE CAPACITY 6.5m 16,000kg

More information

GR-550EX HYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-550E /EX-12. Left hand steering CRANE CAPACITY

GR-550EX HYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-550E /EX-12. Left hand steering CRANE CAPACITY HYDRAULIC ROUGH TERRAIN CRANE SPEC. SHEET NO. GR-55E-1-212/EX-12 CRANE SPECIFICATIONS GR-55EX GENERAL DATA Left hand steering CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42. m DIMENSION Overall

More information

KATO KRM-13H. 13 TONNE HYDRAULIC SLEW CRANE Specification

KATO KRM-13H. 13 TONNE HYDRAULIC SLEW CRANE Specification KATO KRM-13H 13 TONNE HYDRAULIC SLEW CRANE Specification Height Length Width Regd Weight TARE 2.845 m 7.375 m 1.995 m 13140 kgs ROUGH TERRAIN CRANE CRANE Description Rough terrain crane with maximum lifting

More information

HYDRAULIC TRUCK CRANE

HYDRAULIC TRUCK CRANE HYDRAULIC TRUCK CRANE SPEC. SHEET NO. GT-55E-1-12/EX-93 GT-55EX CARRIER : TC-4255 GENERAL DATA CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42.m DIMENSION Overall length approx. 13,48 mm Overall

More information

HYDRAULIC TRUCK CRANE

HYDRAULIC TRUCK CRANE HYDRAULIC TRUCK CRANE SPEC. SHEET NO. GT-55E-1-12/EX-91 GT-55E CARRIER : TC-4255 GENERAL DATA CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42.m DIMENSION Overall length approx. 13,48 mm Overall

More information

CARRIER : TC CRANE CAPACITY 30,000 kg at 3.0 m

CARRIER : TC CRANE CAPACITY 30,000 kg at 3.0 m CARRIER : TC-4230 GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 10.5m 33.0m DIMENSION Overall length approx. 12,670 mm Overall width approx. 2,490 mm Overall height approx. 3,450 mm MASS

More information

model PROVISIONAL product guide features contents 200 mton (220 ton) capacity 865 m-ton (6,267 ft-kips) Maximum Load Moment

model PROVISIONAL product guide features contents 200 mton (220 ton) capacity 865 m-ton (6,267 ft-kips) Maximum Load Moment features 200 mton (220 ton) capacity 865 m-ton (6,267 ft-kips) Maximum Load Moment 89 m (292') Heavy-Lift Boom 98,4 m (323') Fixed Jib on Heavy-Lift Boom 113,8 m (373') Luffing Jib on Heavy-Lift Boom 253

More information

GTC-400EX 40t Telescopic Boom Crawler Crane

GTC-400EX 40t Telescopic Boom Crawler Crane GENERAL DATA CRANE CAPACITY 40t at 3.0m BOOM 4-section, 10.4 m 32.0 m DIMENSION Overall Length 13.31 m Overall Width (tracks extended) 5.59 m Overall Width (tracks retracted) 3.66 m Overall Height 3.05

More information

ROUGH TERRAIN CRANE GR-160N

ROUGH TERRAIN CRANE GR-160N ROUGH TERRAIN CRANE GR-160N JAPANESE SPECIFICATIONS OUTLINE H-type Outrigger SPEC. NO. Control No. JA-01 GR-160N 1. Crane Specifications Crane Crane Capacity 6.5 m boom 16,000 kg x 3.0 m (6-part line)

More information