model 8000 product guide contents 80 ton Lift Capacity 2,037 ft-kips Maximum Load Moment 200' Heavy-Lift Boom 240' Fixed Jib on Heavy-Lift Boom

Transcription

1 ton ift Capacity 2,037 ft-kips Maximum oad Moment 200' eavy-ift 2' Fixed Jib on eavy-ift 23 P engine 525 fpm line speed 32,000 lb Maximum ine Pull 6,000 lb Material Rehandling Clamshell capacity Fast, efficient self-assembly and disassembly Manitowoc Crane CARE comprehensive support model 00 product guide contents Specifications 3 Outline Dimensions 6 Self Assembly 0 Winch Performance Data Combinations 2 Main Range / oad Charts 3 Fixed Jib Range / oad Charts 6 Clamshell 9 Above. Beyond. Everywhere. TM

2 2 Five elephants lamely kisses umpteen quixotic fountains, yet Paul gossips, although one putrid Macintosh untangles five purple televisions, however the sheep laughed. One television easily telephoned the bourgeois dwarves, and five Macintoshes laughed comfortably. One progressive pawnbroker kisses Phil, yet umpteen bourgeois chrysanthemums sacrificed two fountains. The ticket untangles one schizophrenic mat, although bureaux auctioned off one silly Macintosh, but five quite bourgeois elephants telephoned umpteen sheep. Two schizophrenic elephants towed five speedy dwarves. The televisions drunkenly tickled one extremely progressive Macintosh. Mark tastes the partly angstridden lampstand, however mostly putrid chrysanthemums bought Jupiter, although the trailer auctioned off obese aardvarks. Five angst-ridden televisions abused umpteen subways, and the televisions perused umpteen dogs. The irascible lampstand ran away, although one Macintosh annoyingly abused bureaux, and five angst-ridden subways marries two cats. Umpteen televisions ran away.two botulisms telephoned the fountains, yet two obese televisions ran away, however umpteen sheep untangles five Jabberwockies, even though umpteen wart hogs quickly towed the putrid botulism, however two silly poisons marries Darin, then the aardvarks gossips cleverly. Dan abused purple botulisms. Two obese subways noisily sacrificed umpteen Jabberwockies. Two quite putrid orifices marries the schizophrenic poisons. model 00

3 specifications Upperworks Engine Mitsubishi 6D6-TA2B Diesel, 6 cylinder, watercooled diesel, direct fuel injection with turbocharger, 59 kw ( high-idle RPM. Maximum torque 593 lb ft (4 N m) net at,0 rpm (SAE J 349). One diesel fuel tank, 06 gallons (0 liters). Two 2 volt 20 A capacity batteries, 24 volt system and amp alternator. All wiring harnesses and connectors are numbered for easier servicing. Machine is equipped with individual fused branch circuits. Controls Full-flow hydraulic control system for constant variable pressure to front and rear drums, boom hoist brakes and clutches. Controls respond instantly to the touch, delivering smooth function operation. Relief valve pressures: oad hoist, boom hoist and propel system... 4,4 psi (35 kg/cm2) Swing system... 3,9 psi (2 kg/cm2) Control system..., psi ( kg/cm2) Filtration: Full-flow and bypass type with replaceable paper element. Drums Front and rear drums for load hoist powered by hydraulic variable displacement piston-type motors, driven through planetary reducers. Powered hoisting/ lowering and free-fall operation is standard. Drum turn indicators for front and rear drums are also standard. Brake: spring set, hydraulically-released, multiple-disc holding brake is mounted inside the hoist motor and is operated through a counter-balance valve. An external ratchet is fitted for locking the drums. Drums: front and rear 2.7" (5,2 mm) P.C.D. X 2.5" (545.4 mm), grooved for 7/8" (2,.2 mm) wire rope. Wire rope capacity: Front drum 869 ft (265 m) working length Rear drum 673 ft (205 m) working length Storage length (each drum),099' (335 m) ine speed: Single line on the first drum layer oisting ft/min (20m/min) owering ft/min (20m/min) Optional third drum: same dimensions and specifications as front drum. Swing System 3 ydraulic System All three variable displacement piston-type pumps are driven by a heavy-duty pump drive. One of these pumps is used in the right propel circuit and hook hoist circuit, and can accommodate an optional third circuit. Another is used in the left propel circuit, boom hoist circuit and hook hoist circuit. The third variable displacement pump is used in the swing circuit. In addition, two gear pumps are used in the control system and auxiliary equipment. One of these serves the clutch and brakes. Also, two gear pumps are utilized in the brake cooling system. Maximum pressure rating... 4,6 psi (325 kg/cm2) oad hoist, boom hoist and propel... 2 Piston pumps Swing... Piston pump Control system and auxiliary... 2 Gear pumps Brake cooling system... 2 Gear pumps Reservoir capacity: 00 US gallon (3 liter). Cooling: Oil-to-air heat exchanger (plate-fin type). Swing unit: Powered by a hydraulic piston-type motor driving spur gears through planetary reducers, the swing system provides 3 rotation. Swing brake: A spring-set, hydraulically released multiple-disc brake is internally fitted in swing motor. Swing lock: 2 Position lock for transportation. Rotating bed turntable: Single-row ball bearing with an integral internally cut swing gear. Swing speed 4.0 rpm Support System Single drum powered by a hydraulic axial piston motor through a planetary reducer. Brake: A spring-set, hydraulically released multipledisc brake is internally fitted in the boom hoist motor and operated through a counter-balance valve. An external ratchet is fitted for locking the drums. model 00

4 specifications model 00 4 Support System This high folding type gantry is fitted with a sheave frame for boom hoist reeving. ydraulic lift is standard. It provides full up, full down positions with linkage. Counterweight UNIT WEIGT TOTA WEIGT QTY. ITEM kg lb kg lb Carbody 2 Each 3 3 7, ,700 Carbody Total 6 6 4,700 Upperworks Counterweight A , ,5 Counterweight B , ,3 Upperworks Total ,900 Counterweight TOTA ,0 Operator s Cab Totally enclosed, full vision cab fitted with tinted safety glass and a sliding front window. A fully adjustable, highbacked seat with arm rests permits operators to set their ideal working position. Side mounted console for auxiliary controls and instruments. An air conditioner, a signal horn, cigarette lighter, windshield wiper and inspection lamp socket are standard features. Controls In front of operator are the foot pedals for front and rear drum brakes and foot acceleration pedal. At operator s right side are the travel (propel) control levers and the function lock lever. To the operator s right front are the boom hoist control lever, main (front) and auxiliary (rear) winch control levers and the freefall select switches for the main and auxiliary winches and drum turn indicator (front/rear drum). To the operators left front are the swing control lever and third drum control lever (if the machine is so equipped). To the operator s left are the crawler extend/retract lever and the positive swing lock. The left-hand console contains toggle switches for travel (propel) speed, free-fall high/low select, gantry control, crane/clamshell select switch and the antitwo-block/boom overhoist switches. Directly in front of the console are the drum pawl lock for boom, front, rear and third drum (if so equipped) and the engine ignition key. The swing brake and signal horn are mounted on the swing control lever. Gauges Fuel gauge, engine water temperature gauge, hour meter and tachometer are located on the monitor display. Warning display All potential warnings, including battery charge, engine oil pressure, air cleaner, engine oil filter, control main pressure, and hydraulic oil temperature will appear on the monitor display when a fault occurs. Safety device Function lock lever, anti-two-block, boom over hoist limit switch, boom angle indicator, signal horn, boom hoist drum lock, front and rear drum lock, swing lock, swing alarm (buzzer and lamps), boom backstops, safety latch on hook blocks, and load moment indicator. owerworks Carbody The durable carbody features steel welded construction with extendible axles. Crawlers Crawler assemblies can be hydraulically extended for wide-track operation or retracted for transportation. Crawler belt tension adjusted with hydraulic jack and maintained by shims between idler block and frame. Crawler drive The independent hydraulic propel drive is built into each crawler side frame. Each drive consists of a hydraulic motor driving a propel sprocket through a planetary gearbox. The hydraulic motor and gearbox are built into the crawler side frame within the shoe width. The track rollers are sealed for maintenancefree operation. Crawler brakes Spring set, hydraulically released, multiple disc-type parking brakes are built into each propel drive. Steering mechanism The hydraulic propel system provides both skid steering (driving one track only) and counter-rotating steering (driving each track in opposite direction). Crawler shoes 63 shoes, 36" (94 mm) wide each crawler. Travel speed (igh/ow).8/0.75 mph (,9/,2 km/h)

5 specifications Attachments 5 Welded lattice construction using tubular, high-tensile steel chords with pin connections between sections. tip is open throat construction. Two idler sheaves and four point sheaves are standard. Basic boom length ' (5,2 m) consists of the boom butt section 9' 0" (5, m), 0' 0" (3,0 m) boom insert and boom top section 2' 0" (6,39 m) and. Optional boom inserts are available to provide extension capabilities. They also have welded lattice construction with tubular, high-tension steel chords and pin connections on each one of 0' (3,05 m), 20' (6,0 m), ' (2,2 m) inserts. Maximum total length of boom 200 (6,0 m). Fixed Jib The optional fixed jib employs welded lattice construction with tubular, high-tension steel chords with pin connections between sections. Basic jib length 30' (9,4 m) consists of Jib butt section 5' (4,57 m) and Jib top section 5' (4,57 m). Optional Jib boom inserts of 0' (3,05 m), 20' (6,0 m) are available for extension capabilities up to ' (8,3 m). Maximum total length of boom and jib ' (57,9 m) + ' (8,3 m) is 2' (73,2 m). Tools and Accessories A set of tools and accessories are furnished. Optional Equipment Optional: Blocks and ooks 2 US ton ball hook, 396 lbs. US ton hook block, 2,398 lbs, four 24" Nom. OD roller bearing sheaves grooved for 7/8" dia. wire rope, and roller bearing swivel with hook latch. Travel kit Detachable upper boom point Custom color model 00

6 6model 00 outline dimensions R=4' 0" (4,28 m) ' 3" (3,42 m) 6' 8" (2,03 m) 3' 7" (,0 m) 4' " (,52 m) 20' 3" (6,8 m) 5' 9" (,75 m) Basic ' (5,24 m) 3' 7" (, m) 6' 0" (5,3 m) 9' 8" (5,99 m) 5' 3" (, m) 3' " (0,94 m) 0' 6" (3,20 m) 0' 6" (3,20 m) ' 3" 3' 0" (0,9 m) (0,39 m) ' 6" (3, m) Ret. 6' 3" (4,94 m) Ext.

7 outline dimensions Upperworks x ength 2,6 m 39' " Width 3, m ' 6" eight 3,45 m ' 4" Weight 820 kg 89,9 lb 7 Note: Weight includes base machine, crawler, gantry, maximum hoist and whip lines on drums, boom butt, full hydraulic fluid reservoir, and half tank of fuel. zcenter Counterweight Upperworks x ength 8,27 m 27' 2" Width 3, m ' 6" eight 3,45 m ' 4" Weight kg 85,3 lb Note: Weight includes base machine, crawler, gantry, maximum hoist and whip lines on drums, full hydraulic fluid reservoir, and half tank of fuel. Upperworks x ength 6,55 m 2' 6" Width 3, m ' 6" eight 3,20 m 0' 6" Weight kg 8,0 lb Note: Weight includes base machine, crawler, maximum hoist and whip lines on drums, full hydraulic fluid reservoir, and half tank of fuel. 2 2 Upperworks x ength 3,39 m ' " ength 2 6,3 m 23' 9" Width 3,20 m 0' 6" eight 2,8 m 9' 3" eight 2 3,06 m 0' " Weight 23 0 kg 52,0 lb Note: Weight includes base machine, gantry, maximum hoist and whip lines on drums, full hydraulic fluid reservoir, and half tank of fuel. zcenter Counterweighounterweight Crawlers x 2 ength 5,99 m 9' 8" Width 0,9 m 3' 0" eight 0,98 m 3' 3" Weight 7 0 kg 6,37 lb Optional 3rd Drum & Wire Rope x Weight 930 kg 4,236 lb model 00 Option

8 8model 00 outline dimensions W Upper Counterweight A x ength 3, m ' 0" Width 0,9 m 3' 0" eight,64 m 5' 5" Weight 2 0 kg 27,563 lb W Upper Counterweight B x ength 3, m ' 0" Width 0,57 m ' 0" eight,67 m 5' 6" Weight 2 0 kg 27,342 lb W Carbody Counterweight x 2 ength,72 m 5' 8" Width,6 m 3' 0" eight 0,58 m ' " Weight 3 3 kg 7,3 lb Butt 5,8 m (9') x ength 5,97 m 9' 7" Width,42 m 4' 8" eight,48 m 4' 0" Weight 055 kg 2,326 lb Top 6,4 m (2') x ength 6,90 m 22' 8" Width,38 m 4' 6" eight,48 m 4' 0" Weight 00 kg 2,227 lb Insert 3,0 m (0') x, 2 ength 3,6 m 0' 4" Width,36 m 4' 6" eight,29 m 4' 3" Weight 270 kg 590 lb Insert 6, m (20') x, 2 ength 6,2 m 20' 5" Width,36 m 4' 6" eight,29 m 4' 3" Weight 465 kg,025 lb Option

9 outline dimensions Insert 2,2 m (') x, 2, 3 ength 2,3 m ' 5" Width,36 m 4' 6" eight,29 m 4' 3" Weight 8 kg,896 lb Weight A 875 kg,929 lb 9 Note: Use one A type insert with lug required for any boom combinations that require a 2,2 m (') insert. Fixed Jib Butt x ength 4,82 m 5' 9" Width 0,79 m 2' 7" eight 0,79 m 2' 7" Weight 200 kg 44 lb Fixed Jib Top x ength 4,96 m 6' 3" Width 0,79 m 2' 7" eight 0,79 m 2' 7" Weight 2 kg 67 lb Fixed Jib Insert 3,0 m (0') x ength 3,2 m 0' 3" Width 0,79 m 2' 7" eight 0,79 m 2' 7" Weight 00 kg 22 lb Fixed Jib Insert 6, m (20') x ength 6,6 m 20' 3" Width 0,79 m 2' 7" eight 0,79 m 2' 7" Weight kg 397 lb Fixed Jib Strut x ength 3,62 m ' " Width 0,84 m 2' 9" eight 0, m ' 8" Weight 205 kg 452 lb Upper Sheave x ength 0,83 m 2' 9" Width 0,28 m ' 0" eight 0,74 m 2' 5" Weight 45 kg 320 lb model 00 Option

10 self assembly 0 Upper Equalizer ower Equalizer Backstop Gantry Travel Kit ift Cylinder ink CTWT (B) CTWT (A) model 00

11 winch performance data ine Pull Front Drum Rear Drum Optional 3rd Drum Rated line pull * Maximum line pull is not based on wire rope strength. *Maximum line pull 7,000 lbs 32,000 lbs (7 700 kg) (4 0 kg) 7,000 lbs 32,000 lbs (7 700 kg) (4 0 kg) 7,000 lbs 32,000 lbs (7 700 kg) (4 0 kg) Wire Rope Specifications Working Breaking Diameter ength Strength Use Specs inch (mm) feet (m) lbs (kg) Front IWRC C/O Drum 6 X Fi (25) 7/8" (22,2) 869' (265) 79,586 (36 00) Rear IWRC C/O Drum 6 X Fi (25) oist Drum Opt. Third Drum 7/8" (22,2) 673' (205) 79,586 (36 00) IWRC O/O 5/8" (5,8) 492' () 4,234 (8 700) 6 X WS (3) IWRC C/O 6 X Fi (25) 7/8" (22,2) 869' (265) 79,586 (36 00) Model 00 Front and Rear Winch Performannce (Optional: Third Winch) ine Pull Rated ine pull ine speed (ft/min) ayer (lbs) 0 5,000 0,000 5,000 7,000 20,000 25,000 30, ine Pull Rated ine pull ine speed (m/min) ayer (kgf) 0 2,268 4,536 6,4 7,7 9,072,3 3, model 00 Note: ine speeds and line pull based on single line. ine pulls are not based on wire rope strength.

12 boom combinations 2 No. 00 eavy-ift Combinations ength m (ft) 5,2 () 8,3 () 2,3 (70) 24,4 () 27,4 (90) 30,5 (00) 33,5 (0) 36,6 (20) 39,6 (30) 42,7 () 45,7 () 48,8 () 5,8 (70) 54,9 () 57,9 (90) 6,0 (200) Inserts 6, m (20 ft) 3, m (0 ft) 2 2,2 m ( ft) * * * * 2* 2* 2* 2* 3* 3* 3* 3* 3* *Note: One ft. (2,2 m) boom insert with lug A (2,20 m) is required for crane jib. When no jib is available, a ft (2,2 m) boom can be used instead of A (2,2 m). 6,4 m (2 ft) No. 00 Top 2,2 m ( ft) Insert Fixed Jib Combinations Jib ength m (ft) 9, (30) 2,2 () 5,2 () 8,3 () Fixed Jib Inserts 3,m 6,m (0 ft) (20 ft) - - Fixed Jib 8,3 m ( ft) 3, m (0 ft) Jib Insert 4,6 m (5 ft) Jib Butt 6,4 m (2 ft) No. 00 Top 4,6 m (5 ft) Jib Top 6, m (20 ft) Jib Insert 2,2 m ( ft) Insert 2,2 m ( ft) Insert No. 00 Main 6,0 m (200 ft) 2,2 m ( ft) Insert No. 00 Main 54,9 m ( ft) 2,2 m ( ft) Insert 6, m (20 ft) Insert 2,2 m ( ft) Insert model Model 00 Main 6,0 m (200 ft) 3,0 m (0 ft) Insert 3,0 m (0 ft) Insert 5,8 m (9 ft) Butt 00 6, m (20 ft) Insert 5,8 m (9 ft) Butt Model 00 Fixed Jib on Main 73,2 m (2 ft)

13 . Rated loads included in the charts are the maximum allowable freely suspended loads at a given boom length, boom angle and load radius, and have been determined for the machine standing level on firm supporting surface under ideal operating conditions. The user must limit or de-rate rated loads to allow for adverse conditions (such as soft or uneven ground, out-oflevel conditions, wind, side loads, pendulum action, jerking or sudden stopping of loads, inexperience of personnel, multiple machine lifts, and traveling with a load). load chart notes. An auxiliary sheave cannot be used on a 200 ft (.96 m) boom length. 2. The boom should be erected over the front of the crawlers, not IateraIIy. When erecting and lowering the boom with a length of ft (54,9 m) with jib, blocking must be placed at the end of the crawlers. See operator s manual for details. 3. east stable position is over the side Capacities do not exceed 75% of minimum tipping loads. Capacities based on factors other than machine stability such as structural competence are shown by asterisk * in the charts. 3. The machine must be reeved and set-up as stated in the operation manual and all the instruction manuals if these manuals are missing, obtain replacements. backstops are required for all boom lengths. Gantry must be fully raised position for all operations. Crawlers must be fully extended and be locked in position. The crane must be leveled to within % on a firm supporting surface. 4. Do not attempt to lift where no radius or load is listed as crane may tip or collapse. 5. Attempting to lift more than rated loads may cause machine to tip or collapse. Do not tip machine to determine capacity. 6. Weight of hooks, hook blocks, slings and other lifting devices are a part of the total load. Their total weight must be subtracted from the rated load to obtain the weight that can be lifted. 7. When lifting over boom point with jib or auxiliary sheave installed, rated loads for the boom must be deducted as shown below. Jib length Aux. Sheave 30' ' ' ' Deduct (lbs) 320 2,0 3,200 4,200 5, The total load that can be lifted by the jib is limited by rated jib loads. 4. Maximum hoist load for number of reeving parts of line for hoist rope. Maximum oad for Main No. of Parts of ine Maximum oads (Ibs) 7,000 34,000 5,000 68,000 85,000 No. of Parts of ine Maximum oads (Ibs) 02,000 9,000 36,000 53,000,000 Maximum oad for Fixed Jib No. of Parts of ine 2 Maximum oads (lbs) 7,000 24,000 Maximum oad for Auxiliary Sheave No. of Parts of ine Maximum oads (lbs) 7, ifting capacities listed apply only to the machine as originally manufactured for and supplied by Manitowoc Cranes, Inc. Modifications to this machine or use of equipment other than that specified can reduce operating capacity. 6. Designed and rated to comply with ANSI Code B30.5. Operation of this equipment in excess of rated loads or disregard of instruction voids the warranty. 9. lengths for jib mounting are ft (24,4 m) to ft (54,9 m) 0. The total load that can be lifted by the auxiliary sheave is: the rated load for the boom (without auxiliary sheave installed) minus 320 lbs; however, the auxiliary sheave rated load should not exceed 7,000 lbs. model 00

14 heavy-lift boom range diagram No. 00 Main 4 (20) 64, (200) 6, (90) 57,9 () 54, (90) 6.0 (200) 0 (70) 5,8 () 48,8 5.8 (70) 54.9 () 0 EIGT ABOVE GROUND m (ft) () 45,7 () 42,7 (30) 39,6 (20) 36,6 (0) 33,5 (00) 30, (00) 33.5 (0) 36.6 (20) 39.6 (30) 42.7 () 45.7 () 48.8 () (90) 27, (90) () 24, () 20 0 (70) 2,3 2.4 (70) () 8,3 8.3 () () 5,2 5.3 () () 2,2 (30) 9, 00 model 00 4,28 m (4' ") TAISWING,0 m (3' 7") ROTATION,75 m (5' 9") 2,2 () 8,3 () 24,4 () 30,5 (00) 36,6 (20) 42,7 () 48,8 () DISTANCE I FROM CENTERINE OF ROTATION m (ft) 54,9 () 6,0 (200)

15 heavy-lift load charts iftcrane Capacities No. 00 Main 69,0 lb Counterweight 3 Rating lb x 000 ft Radius model 00 Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

16 fixed jib range diagram No. 00 Fixed Jib on Main 6 (2) 79,2 (2) 76, (2) 73,2 (230) 70, (220) 67, (20) 64,0 (200) 6,0 (90) 57,9 9, (30) 2,2 () 5,2 () 8,3 () ,0 (200) ,0 (20) 67, (220) 70, (230) 73,2 (2) 0 0 EIGT ABOVE GROUND m (ft) () 54,9 (70) 5,8 () 48,8 () 45,7 () 42,7 (30) 39,6 (20) 36,6 (0) 33,5 33,5 (0) 36,6 (20) 39,6 (30) 42,7 () 45,7 () 48,8 () 5,8 (70) 54,9 () 57,9 (90) (00) 30,5 (90) 27,4 () 24,4 (70) 2,3 () 8,3 () 5,2 () 2,2 model 00 (30) 9, 4,28 (4' ") TAISWING 00,0 m (3' 7"),75 m (5' 9") ROTATION 2,2 () 8,3 () 24,4 () 30,5 (00) 36,6 (20) 42,7 () 48,8 () DISTANCE FROM CENTERINE OF ROTATION m (ft) 54,9 () 6,0 (200)

17 fixed jib load charts iftcrane Jib Capacities Fixed Jib on No. 00 Main 69,0 lb Counterweight 3 Rating lb x Offset 30 Offset 7 ft ft Radius Radius Jib 30 ft Jib 30 ft ft ft Radius Radius Jib ft Jib ft model 00 Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

18 fixed jib load charts 8 iftcrane Jib Capacities Fixed Jib on Main 69,0 lb Counterweight 3 Rating lb x Offset 30 Offset ft ft Radius Radius Jib ft Jib ft ft ft Radius Radius model 00 Jib ft Jib ft Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

19 clamshell : Welded lattice construction using tubular, high-tensile steel chords with pin connections between sections. Basic boom length: ft (2.2 m) Max. boom length: 70 ft (2.3 m) imit on clamshell bucket weight: 4,0 lbs (2,00 kg) 9 Component Chart length ft (m) arrangement (5.2) Base-A-Tip (8.3) Base-A-A-Tip, Base-B-Tip 70 (2.3) Base-A-B-Tip Base = 20 ft (6.0 m) Insert: A = 0 ft (3.05 m) B = 20 ft (6.0 m) Tip = 20 ft (6.0 m) oad Radius Center of Rotation Clamshell Capacities 42,258 lb Counterweight ft Radius lb x model 00

20 Manitowoc Crane Group - Americas Manitowoc, Wisconsin Facility Tel: [Int + 00] Fax: [Int + 00] Shady Grove, Pennsylvania Facility Tel: [Int + 00] Fax: [Int + 00] Manitowoc Crane Group - atin America Mexico (Service) Tel: [Int + 52] Fax: [Int + 52] Manitowoc Crane Group - EMEA Europe Middle East & Africa Tel: [Int + 33] (0) Fax: [Int + 33] (0) Manitowoc Crane Group - UK Europe Middle East & Africa (Parts & Service) Tel: [Int + 44] (0) Fax: [Int + 44] (0) Manitowoc Crane Group - Germany (Sales, Parts & Service) Tel: [Int + 49] (0) Fax: [Int + 49] (0) Manitowoc Crane Group - France France & Africa (Sales, Parts & Service) Tel: [Int + 33] (0) Fax: [Int + 33] (0) Manitowoc Crane Group - Netherlands (Sales, Parts & Service) Tel: [Int + 3] (0) Fax: [Int + 3] (0) Manitowoc Crane Group - Italy Italy & Southern Europe (Sales, Parts & Service) Tel: [Int + 39] (0) Fax: [Int + 39] (0) Manitowoc Crane Group - Portugal Portugal & Spain (Sales, Parts & Service) Tel: [Int + 35] (0) Fax: [Int + 35] (0) Manitowoc Crane Group - Singapore Asia/Pacific excl China (Sales, Parts & Service) Tel: [Int + 65] Fax: [Int + 65] / 442 Manitowoc Crane Group - Shanghai China (Sales, Parts & Service) Tel: [Int + 86] (0) Fax: [Int + 86] (0) Manitowoc Crane Group - Beijing China (Sales, Parts & Service) Tel: [Int + 86] (0) Fax: [Int + 86] (0) Manitowoc Crane Group - Middle East (Sales) Tel: [Int + 97] (0) Fax: [Int + 97] (0) (Parts & Service) Tel: [Int + 973] (0) Fax: [Int + 973] (0) PRODUCT IMPROVEMENTS MAY CANGE SPECIFICATIONS 2004 MANITOWOC PG-US-E