View thousands of Crane Specifications on FreeCraneSpecs.com. 100 ton. Kobelco CK1000 Crawler Crane Load Charts & Specifications

Transcription

1 100 ton Kobelco K1000 rawler rane harts & Specifications

2 GENERL IMENSIONS Unit: ft-in(mm) 17 1 (5,7) R14 6 (4,430) (2,034) 3 7 (1,100) 3 (6,179) 11 4 (3,450) 4 11 (1,505) 3 8 (1,109) 5 9 (1,750) asic boom length: (12.19m) 10 6 (3,4) 10 6 (3,0) 5 3 (1,600) 3 5 (9) 15 5 (390) (5,436) 7 (6,283) 36 (914) (3,600) Retracted (5,144) Extended UPPER MHINERY LYOUT oom Winch Power Plant Swing Unit Third Winch Rear Winch Front Winch 1

3 SPEIFITIONS UPPER MHINERY Power plant Model...Mitsubishi 624-TEG Type Water-cooled diesel, direct fuel injection with turbocharger No. of cylinder...6 ore and stroke " 5.9" (130 mm 150 mm) isplacement cu in ( liters ) Rated power HP (198 kw) Net at 2,000 rpm (SE J 1349) Max. torque lb ft (1,059 N m) Net at 1,0 rpm (SE J 1349) ooling system... Liquid, recirculating bypass Starter V, 5.5 kw lternator...24 V, 80 MP ycles...4 Radiator...orrugated type core, thermostatically controlled ir cleaner... ry type with replaceable paper element Fuel tank capacity US gal (0 liters) atteries...two 12V, 150 H capacity batteries, connected in parallel Hydraulic System Pumps: ll three variable displacement piston-type pumps are driven by a heavy-duty pump drive. One of these pumps is used in the right propel circuit and hook hoist circuit, and can accommodate an optional third circuit. nother is used in the left propel circuit, boom hoist circuit and hook hoist circuit. The third variable displacement pump is used in the swing circuit. In addition, two gear pumps are used in the control system and auxiliary equipment. One of these serves the clutch and brakes. ontrol: Full-flow hydraulic control system for constant variable pressure to front and rear drums, boom hoist brakes and clutches. ontrols respond instantly to the touch, delivering smooth function operation. Relief valve pressure: hoist, boom hoist and propel system... 4,480 psi (315 kg/cm 2 ) Swing system... 3,980 psi (280 kg/cm 2 ) ontrol system... 1,1 psi (80 kg/cm 2 ) Reservoir capacity: 119 US gal (450 liters) ooling: Oil-to-air heat exchanger (plate-fin type) Filtration: Full-flow and bypass type with replaceable paper element Electrical wiring: ll wiring harnesses and connectors are numbered for easier servicing. Machine is equipped with individual fused branch circuits. oom hoisting system Powered by a hydraulic axial piston motor through a planetary reducer. rake: spring-set, hydraulically released multiple-disc brake is internally fitted in the boom hoist motor and operated through a counter-balance valve. rum: Single drum, grooved for 5/8 in (15.8 mm) dia. wire rope Line speed: Single line on first drum layer Hoisting ft/min (65 m/min) Lowering ft/min (65 m/min) Hoist system Front and rear drums for load hoist powered by hydraulic variable displacement piston-type motors, driven through planetary reducers. rakes & lutches (compatible): Forced-circulation oilcooled wet-type multi-disc brakes, each using positive and negative actuation. rums: (front and rear): 24.1" (613 mm) P " (622 mm) wide drums, each grooved for 1" (25.4 mm) wire rope. Wire rope capacity: Front drum 623 ft (190 m) working length Rear drum 525 ft (160 m) working length Optional third drum 623 ft (190 m) working length Storage length (each drum) 984 ft (300 m) Line speed: Single line on the first drum layer Hoisting ft/min (100m/min) Lowering ft/min (100m/min) Optional third drum: with the same dimensions as front and rear drums Swing system Swing unit: Powered by a hydraulic piston-type motor driving spur gears through planetary reducers, the swing system provides 360 rotation. Swing speed rpm Swing brake: spring-set, hydraulically released multiple-disc brake is internally fitted in swing motor. Swing circle: Single-row ball bearing with an integral internally cut swing gear. Operator s ab Totally enclosed, full vision cab fitted with tinted safety glass and a sliding front window. fully adjustable, highbacked seat with arm rests permits operators to set their ideal working position. Side mounted console for auxiliary controls and instruments. n air conditioner, a signal horn, cigarette lighter, windshield wiper and inspection lamp socket are standard features. ontrols In front of operator are the foot pedals for front and rear drum brakes. t operator s right side are the travel (propel) control levers and the function lock lever. To the operator s right front are the boom hoist control lever, main (front) and auxiliary (rear) winch control levers and the free-fall select switches for the main and auxiliary winches. To the operators left front are the swing control lever and third drum control lever (if the machine is so equipped). To the operator s left are the crawler extend/retract lever and the positive swing lock. The lefthand console contains toggle switches for travel (propel) speed, free-fall high/low select, gantry control, craneclamshell select switch and the anti-two-block/boom overhoist switches. irectly in front of the console are the drum pawl lock for boom, front, rear and third drum (if so equipped) and the engine ignition key. The swing brake and signal horn are mounted on the swing control lever. Gauges: Fuel gauge, engine water temperature gauge, hour meter and tachometer are located on the monitor display. Warning display: ll potential warnings, including battery charge, engine oil pressure, air cleaner, engine oil filter, control main pressure, and hydraulic oil temperature will appear on the monitor display when a fault occurs. 2

4 Safety device: Function lock lever, anti-two-block, boom over hoist limit switch, boom angle indicator, signal horn, boom hoist drum lock, front and rear drum lock, swing lock, swing alarm (buzzer and lamps), boom backstops, safety latch on hook blocks, and optional load moment indicator Gantry High folding type, fitted with sheave frame for boom hoist reeving. Hydraulic lift is standard. Positions full up and full down. TTHMENT oom: Welded lattice construction using tubular, high-tensile steel chords with pin connections between sections. oom tip is open throat construction. Two idler sheaves and three point sheaves are standard. Max. lifting capacity 100 US tons (90,700kg) asic boom length ft (12.19 m) Max. boom length 0 ft (61.0 m) ounterweights Three-piece, vertically arranged, mounted behind the machinery compartment. Total counterweight...63,000 lbs (28,600kg) arbody counterweight: Total weight (Two-pieces)...8,800 lbs (4,000 kg) Self-handling devices: Optional counterweight self-removal device Optional crawler frame self-removal device Weight Operating weight: pprox. 173,000 lbs (including ft boom and 100 US-ton hook block) Ground pressure: verage 10.8 psi (0.76 kg/cm 2 ) with standard 36" shoes Max. gradeability: % oom oom tip oom base Insert (10 ft) Insert ( ft) Insert ( ft) Weight 2,650 lbs (1,0 kg) 2,600 lbs (1,180 kg) 680 lbs (310 kg) 1,150 lbs (5 kg) 2,1 lbs (960 kg) Jib (optional): Welded lattice construction using tubular, high-tensile steel chords with pin connections between sections. Max. lifting capacity 24,000 lbs (10,900 kg) Max. jib length 60 ft (18.3 m) Max. total length of boom and jib 190 ft (57.9 m) + 60 ft (18.3 m) LOWER MHINERY arbody: Steel-welded carbody with axles rawler: rawler assemblies can be hydraulically extended/retracted. rawler track tension is maintained by hydraulic jack force on the track-adjusting bearing block. rawler drive: Independent hydraulic propel drive is built into each side frame, each with a hydraulic motor propelling a drive tumbler through a planetary gear box. rawler brakes: Spring-set, hydraulically released multiple-disc parking brakes are built into each propel drive. Steering mechanism: hydraulic travel system provides skid steering (driving one track only) and counter-rotation of tracks (driving tracks in opposite directions) and differential track speed. Track rollers: 11 lower rollers and 3 upper rollers are fitted to each side frame, sealed and maintenance-free. Shoes: Number...66 per side Shoes (flat): Shoe width... 36" (914 mm) Max. travel speed: High range mph (1.7km/h) Low range mph (1.1km/h) Jib Jib tip Jib base Insert (10 ft) Insert ( ft) iameter of wire ropes Standard: hoist (front, rear and third)... 1in (25.4 mm) oom hoist (12-part line)...5/8 in (15.8 mm) oom suspension rope (2 sets)...1 3/16 in (30 mm) Wire ropes... IWR, 6 x Fi (25) c/o (Front and rear) Optional: Jib back stay guy line (2 lines)...7/8 in (22 mm) oom backstops: telescopic type with spring bumper Line pull Weight 6 lbs (280 kg) 4 lbs (0 kg) 2 lbs (100 kg) 0 lbs (180 kg) Rated line pull Maximum line pull Front 25,100 lbs 44,100 lbs (11,0 kg) (,000 kg) Rear 25,100 lbs 44,100 lbs (11,0 kg) (,000 kg) Third (optional) 25,100 lbs 44,100 lbs (11,0 kg) (,000 kg) 3

5 NOTES The following guidelines should be referred to when when interpreting the load rating charts. 1. Rated loads included in the charts are the maximum allowable freely suspended loads at a given boom length, boom angle and load radius, and have been determined for the machine standing on level and firm supporting surface under ideal operating conditions. The user must limit or de-rate rated loads to allow for adverse conditions (such as soft or uneven grounds, out-of-level conditions, wind, side loads, pendulum action, jerking or sudden stopping of loads, inexperience of personnel, multiple machine lifts, and traveling with a load). 2. apacities do not exceed 75% of minimum tipping loads. apacities based on factors other than machine stability such as structural competence are shown by asterisk in the charts. 3. The machine must be reeved and set-up as stated in the operator s manual and all the instruction manuals. If these manuals are missing, obtain replacements. oom backstops are required for all boom lengths. Gantry must be in the fully raised position for all operations. rawlers must be fully extended and be locked in position. The crane must be leveled to within 1% on a firm supporting surface. 4. o not attempt to lift where no radius on load is listed as crane may tip or collapse. 5. ttempting to lift more than rated loads may cause machine to tip or collapse. o not tip machine to determine capacity. 6. Weight of hooks, hook blocks, slings and other lifting devices are part of the total load. Their total weight must be subtracted from the rated load to obtain the weight that can be lifted. 7. When lifting over boom point with jib or auxiliary sheave, rated loads for the boom must be deducted as shown below. Jib length ux. Sheave 30 ft ft 50 ft 60 ft educt (lbs) 4 2,0 3,0 4,0 5,0 8. The total load that can be lifted with the jib is limited by rated jib loads. The total load that can be lifted with the auxiliary sheave is limited by rated auxiliary sheave loads. 9. oom lengths for jib mounting are from 80 ft (24.4 m) to 190 ft (57.9 m). 10. n auxiliary sheave cannot be used on a 0 ft (61.0 m) boom length. 11. The boom should be erected over the front of the crawlers, not laterally. 12. Least stable position is over the side. 13. Lifting capacities listed apply only to the machine as originally manufactured and designed by KOELO ONSTRUTION MHINERY O., LT. Modifications to this machine or use of equipment other than that specified can reduce operating capacity. 14. esigned and rated to comply with NSI ode

6 WORKING RNGES (with fixed jib) OOM & JI RRNGEMENT 30 60ft jib 50ft jib ft jib ft jib 2 LIFT (FT) 5'9"(1.75m) 0ft oom 190ft oom 180ft oom 170ft oom 160ft oom 150ft oom 1ft oom 130ft oom 1ft oom 110ft oom 100ft oom 90ft oom 80ft oom 70ft oom 60ft oom 50ft oom ft oom ENTER OF ROTTION 50 ( max. length for attaching jib) ( min. length for attaching jib) HEIGHT OVE GROUN '7"(1.1m) RIUS FROM ENTER OF ROTTION (FT) 5

7 OOM N GUY LINE RRNGEMENT Symbol imensions of Guy Line iameter in (mm) Length ft-in (m) 13/16 (30) -3 (6.17) 13/16 (30) 10-0 (3.05) 13/16 (30) -0 (6.10) 13/16 (30) -0 (12.) For most efficient use of this machine, boom and guy line arrangement must be correctly observed as shown in this figure. 130ft (39.6m) 1ft (42.7m) Location of jib backstay lug Location of cable roller on boom tip Location of cable roller on boom insert 150ft (45.7m) 10 ft (12.2m) 50ft (15.2m) 60ft (18.3m) 70ft (21.3m) 80ft (24.4m) ft (27.4m) 100ft (30.5m) 110ft (33.5m) 1ft (36.6m) ft (48.8m) 170ft (51.8m) 180ft (54.9m) 190ft (57.9m) 0ft (61.0m) Manufacturer s recomended boom arrangement makes shorter boom arrangements possible. JI N GUY LINE RRNGEMENT Symbol imensions of Guy Line iameter in (mm) Length ft-in (m) E 11/32 (22) 63-5 (19.34) F 11/32 (22) 19-3 (5.88) G 11/32 (22) 38-7 (11.75) H 11/32 (22) (37.54) J 11/32 (22) 8-0 (2.44) E TIP SE 30 E 10ft SE TIP This figure shows the arrangement when the jib offset angle is 30 degrees. When setting the offset angle to 10 degrees, deduct the additional guy line J from the boom side guy line H. For jib use with ft of main boom, you must use the ft boom insert that has lugs. Jib use is from ft of main boom only E G SE ft TIP E F TIP G 10ft SE 30 ft TIP TIP TIP H H H H TIP ft ft ft ft OOM INSERT WITH LUGS OOM INSERT WITH LUGS OOM INSERT WITH LUGS OOM INSERT WITH LUGS 30ft JI ft JI 50ft JI 60ft JI 6

8 K1000 Lifting apacity LIFT RNE SERVIE Refer to notes page 4. 3 ounterweights, 2 arbody weights, rawler Fully Extended oom oom oom 360 oom oom oom 360 Length ngle Point Elev. Rated Length ngle Point Elev. Rated (degree) (lbs) (degree) (lbs) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,850 7

9 K1000 Lifting apacity LIFT RNE SERVIE Refer to notes page 4. 3 ounterweights, 2 arbody weights, rawler Fully Extended oom oom oom 360 oom oom oom 360 Length ngle Point Elev. Rated Length ngle Point Elev. Rated (degree) (lbs) (degree) (lbs) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,590 8

10 K1000 Lifting apacity LIFT RNE SERVIE Refer to notes page 4. 3 ounterweights, 2 arbody weights, rawler Fully Extended oom oom oom 360 oom oom oom 360 Length ngle Point Elev. Rated Length ngle Point Elev. Rated (degree) (lbs) (degree) (lbs) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,0 9

11 K1000 Lifting apacity LIFT RNE SERVIE Refer to notes page 4. 3 ounterweights, 2 arbody weights, rawler Fully Extended oom oom oom 360 oom oom oom 360 Length ngle Point Elev. Rated Length ngle Point Elev. Rated (degree) (lbs) (degree) (lbs) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,080 10

12 K1000 Jib Lifting apacity LIFT RNE SERVIE Refer to notes page ft oom 90 ft oom 30 24, , ,000 24, ,000 24, ,000 21,000 24,000,000 24,000 21,000 24,000,000 18, ,000,700 24,000 15,360,000 18, ,000 19,510 24,000 14,480,000 17, ,000 18,380 22,480 13,6 18,560 11,080 16, ,000 17,500,700 12,980 17,080 10,490 14,850 8, ,9 16,710 19,180 12,360 15,800 9,980 13,730 8,480 70,810 16,0 17,870 11,830 14,7 9,5 12,760 8, ,910 15,380 16,660 11,350 13,710 9,100 11,860 7, ,370 14,850 15,670 10,930 12,870 8,730 11,130 7, ,0 14,810 10,560 12,1 8,4 10,470 7, ,850 14,0 10,250 11,500 8,130 9,870 6, ,750 13,310 10,890 7,8 9,3 6, ,830 12,690 10,360 7,6 8,860 6, ,1 9,890 8,4 6, ,350 9,470 8,060 5, ,080 7, , , , , ,000 24, ,000 24,000,000 24,000 21,000 24,000, ,000 21,000 24,000,000 18, ,000,100 24,000 14,810,000 18, ,000 19,0 23,890 14,0 19,550 11,300 16, ,000 18,1 22,0 13,330 18,000 10,730 15,630 9, ,660 17,3,410 12,360 16,730 10,250 14,460 8,660 70,5 16,6 19,0 12,760 15,580 9,780 13,470 8, ,6 15,960 17,760 12,230 14,5 9,360 12,5 7, ,080 15,430 16,730 11,7 13,660 8,990 11,770 7, ,760 14,9 15,800 11,300 12,890 8,680 11,080 7, ,570 14,7 10,930 12,210 8,370 10,470 6, ,470 13,6 10,580 11,570 8,110 9,890 6, ,5 12,690 10,270 11,0 7,870 9,390 6, ,700 11,860 10,530 7,6 8,950 6, ,080 10,070 8,550 6, ,360 9,650 8,150 5, ,300 7, ,970 7, , , ft oom 110 ft oom 32 24, , ,000 24, ,000 24,000 24,000 24,000, ,000 21,000 24,000,000 18, ,000,650 24,000 15,100,000 18, ,000 19,570 24,000 14,3,000 11,500 17, ,000 18,690 23,280 13,660 18,930 10,950 16, ,4 17,900 21,6 13,090 17,590 10,470 15,160 8,810 70,3 17,190,190 12,560 16,4 10,030 14,130 8, ,0 16,510 18,6 12,050 15,3 9,610 13,160 8, ,860 15,960 17,060 11,6 14,4 9,230 12,360 7, ,5 15,450 15,710 11,260 13,6 8,9 11,660 7, ,3 14,570 14,500 10,910 12,910 8,610 11,0 7, ,2 13,4 13,380 10,580 12,230 8,330 10,4 6, ,270 12,450 10,310 11,660 8,090 9,9 6, ,460 11,590 11,150 7,870 9,450 6, ,690 10,8 10,670 7,690 9,030 6, ,980 10,110 10,0 8,610 6, ,470 9,590 8,280 5, ,860 9,010 7, ,480 7, ,800 7,0 1 7, , , , ,000 24,000 24,000 24, ,000 21,000 24,000,000 18, ,000 21,000 24,000 15,360,000 18, ,000,100 24,000 14,610,000 18, ,000 19,2 24,000 13,970 19,810 11,150 17, ,260 18,430 22,500 13,0 18,430 10,670 15,8 8,970 70,150 17,700,370 12,870 17,230 10,250 14,770 8, ,230 17,0 18,450 12,380 16,110 9,830 13,800 8, ,680 16,460 16,880 11,9 15,160 9,470 12,960 7, ,3 15,650 15,5 11,570 14,350 9,1 12,230 7, ,150 14,4 14,3 11,2 13,600 8,8 11,590 7, ,0 13,270 13,0 10,890 12,890 8,550 10,950 7, ,100 12,3 12,250 10,600 12,300 8,310 10,4 6, ,260 11,410 10,330 11,530 8,090 9,9 6, ,510 10,6 10,110 10,780 7,890 9,500 6, ,780 9,9 10,030 7,690 9,080 6, ,170 9,300 9,390 8,700 6, ,4 8,730 8,810 8,370 5, ,0 8,280 8, ,4 7,800 7, ,250 7, , ,370 11

13 K1000 Jib Lifting apacity LIFT RNE SERVIE Refer to notes page 4. 1 ft oom 130 ft oom , ,000 24,000 24, ,000 21,000 24,000, ,000 21,000 24,000,000 18, ,000,560 24,000 14,880,000 18, ,000 19,680 24,000 14,2,000 11,330 17, ,970 18,910 22,2 13,690 19,2 10,860 16,460 9, ,860 18,180,100 13,160 18,010 10,4 15,380 8, ,9 17,500 18,160 12,670 16,8 10,030 14,390 8, ,0 16,790 16,6 12,250 15,890 9,670 13,550 8, ,050 15,410 15,250 11,860 15,030 9,3 12,780 7, ,860 14,170 14,0 11,500 14,190 9,060 12,1 7, ,7 13,0 12,910 11,170 13,050 8,770 11,480 7, ,790 12,050 11,970 10,860 12,100 8,500 10,930 7, ,950 11,170 11,130 10,600 11,260 8,280 10,4 6, ,0 10,360 10,360 10,490 8,060 9,960 6, ,470 9,630 9,870 9,7 7,870 9,5 6, ,860 8,990 9,100 7,690 9,1 6, ,280 8,4 8,530 7,530 8,610 6, ,690 7,890 8,000 8,060 5, ,830 7,4 7,510 7,580 5, ,700 7,030 7, ,5 6, ,880 6, , ,090 1 ft oom ,000 24, ,000 24,000, ,000 21,000 24,000,000 18, ,000,980 24,000 15,100,000 18, ,000,1 24,000 14,500,000 11,480 18, ,730 19,350 22,000 13,930,010 11,0 17, ,6 18,650 19,860 13,4 18,760 10,6 16,000 8, ,680 17,960 17,9 12,9 17,570 10,0 14,960 8, ,130 16,600 16,350 12,5 16,530 9,850 14,100 8, ,790 15,180 14,990 12,1 15,160 9,5 13,330 7, ,600 13,950 13,800 11,770 13,950 9,230 12,630 7, ,470 12,780 12,650 11,4 12,800 8,950 11,970 7, ,530 11,810 11,700 11,130 11,860 8,700 11,410 7, ,690 10,950 10,860 10,860 11,000 8,480 10,890 6, ,9 10,160 10,090 10,4 10,2 8,260 10,310 6, ,210 9,360 9,650 9,470 8,0 9,560 6, ,570 8,730 8,990 8,8 7,870 8,9 6, ,0 8,150 8,260 7,710 8,350 6, ,490 7,6 7,730 7,560 7,8 6, ,9 7,1 7,250 7,310 5, ,150 6,670 6,760 6,830 5, ,0 6,3 6, ,370 5,860 6, ,260 5, ,650 5, , , ft oom 24, , ,000 21,000 24,000, ,000 21,000 24,000 15,3,000 18, ,980,5 24,000 14,7,000 18, ,450 19,770 21,730 14,170,000 11,170 17, ,330 19,060 19,590 13,690 19,480 10,780 16,570 8, ,390 17,9 17,650 13,180 17,850 10,380 15,5 8, ,850 16,330 16,090 12,760 16,260 10,030 14,630 8, ,480 14,9 14,7 12,380 14,880 9,7 13,8 8, ,290 13,690 13,510 12,030 13,660 9,430 13,130 7, ,160 12,5 12,360 11,680 12,5 9,1 12,450 7, ,2 11,550 11,410 11,370 11,570 8,880 11,680 7, ,380 10,690 10,580 10,970 10,710 8,660 10,8 7, ,630 9,890 9,810 10,180 9,9 8,4 10,050 6, ,900 9,1 9,060 9,410 9,190 8,2 9,300 6, ,260 8,480 8,4 8,730 8,550 8,0 8,660 6, ,690 7,8 8,130 7,980 7,870 8,060 6, ,180 7,310 7,450 7,710 7,530 6, ,700 6,830 6,9 7,250 7,030 6, ,060 6,370 6,450 6,5 5, ,0 5,880 6,0 6,1 5, ,760 5,290 5,6 5, ,690 5,090 5, ,070 4,5 4, ,010 4, ,500 3, , ,000 24, ,000 21,000 24,000, ,000 21,000 24,000,000 18, ,800,890 24,000 14,9,000 18, ,270,150 21,580 14,390,000 11,330 18, ,150 19,4 19,4 13,910 19,6 10,930 17,1 9, ,210 17,810 17,480 13,4 17,680 10,530 16,0 8, ,670 16,0 15,890 13,000 16,090 10,0 15,160 8, ,300 14,790 14,5 12,630 14,700 9,870 14,350 8, ,110 13,530 13,310 12,270 13,490 9,590 13,6 7, ,990 12,360 12,190 11,9 12,3 9,300 12,450 7, ,0 11,390 11,2 11,610 11,390 9,060 11,500 7, ,0 10,510 10,380 10,8 10,530 8,810 10,6 7, ,430 9,7 9,610 10,030 9,760 8,590 9,850 7, ,700 8,970 8,860 9,230 9,010 8,390 9,100 6, ,090 8,310 8,2 8,570 8,370 8,0 8,460 6, ,510 7,710 7,670 7,950 7,780 8,0 7,870 6, ,980 7,1 7,0 7,250 7,6 7,3 6, ,500 6,630 6,7 7,090 6,830 6, ,010 6,170 6,260 6,590 6,3 6, ,4 5,750 5,8 5,930 5, ,8 5,2 5,460 5,530 5, ,250 4,690 4,980 5, ,650 4,1 4,450 4, ,610 3,990 4, ,5 3, ,060 3,370 12

14 K1000 Jib Lifting apacity LIFT RNE SERVIE Refer to notes page ft oom 170 ft oom 45 24, ,000 24, ,000 21,000 24,000,000 18, ,7 21,000 24,000 15,1,000 18, ,180,500 21,470 14,590,000 11,0 18, ,0 19,730 19,310 14,100 19,530 11,060 17,650 9, ,100 17,7 17,370 13,6 17,570 10,670 16,570 8, ,5 16,090 17,580 13,2 15,980 10,330 15,670 8, ,190 14,680 14,410 12,850 14,590 10,030 14,700 8, ,980 13,4 13,0 12,500 13,350 9,7 13,490 8, ,860 12,270 12,050 12,1 12,210 9,450 12,3 7, ,910 11,280 11,110 11,6 11,260 9,210 11,370 7, ,070 10,0 10,250 10,730 10,0 8,970 10,490 7, ,300 9,610 9,470 9,9 9,610 8,770 9,7 7, ,550 8,8 8,730 9,1 8,860 8,550 8,970 6,9 1 7,930 8,0 8,090 8,460 8,2 8,350 8,310 6, ,360 7,580 7,510 7,8 7,6 8,090 7,730 6, ,830 7,030 6,960 7,270 7,090 7,510 7,180 6, ,3 6,480 6,760 6,590 6,980 6,670 6,3 1 5,860 5,990 6,260 6,100 6,450 6,190 6, ,310 5,570 5,680 5,990 5,770 6, ,760 5,090 5,290 5,570 5,370 5, ,230 4,580 4,800 4,960 5, ,680 4,050 4,3 4,490 4, ,170 3,590 3,880 4, ,100 3,430 3, , ,000 24, ,000 21,000 24,000,000 18, ,500 21,000 23,800 15,290,000 18,000 65,9,830 21,250 14,770,000 18, ,8 19,530 19,090 14,300 19,310 18, ,880 17,5 17,150 13,8 17,350 10,800 17,080 8, ,3 15,890 15,560 14,3 15,760 10,490 15,890 8, ,950 14,480 14,170 13,050 14,370 10,180 14,500 8, ,7 13,2 12,960 12,690 13,130 9,890 13,270 8, ,610 12,050 11,810 12,360 11,190 9,610 12,100 7, ,670 11,080 10,860 11,4 11,0 9,360 11,150 7, ,810 10,0 10,000 10,530 10,160 9,1 10,270 7, ,060 9,390 9,230 9,7 9,390 8,900 9,470 7, ,310 8,610 8,480 8,9 8,610 8,680 8,730 7, ,670 7,980 7,8 8,2 7,980 8,500 8,090 6, ,090 7,360 7,270 7,6 7,0 7,890 7,490 6, ,560 6,810 6,7 7,070 6,850 7,310 6,9 6, ,080 6,300 6,230 6,5 6,3 6,760 6,450 6, ,590 5,750 6,0 5,860 6,260 5,950 6, ,0 5,290 5,590 5,4 5,790 5,530 5, ,5 4,780 4,960 5,370 5,070 5, ,030 4,3 4,490 4,930 4,6 5, ,5 3,810 4,030 4,160 4, ,0 3,370 3,610 3,760 4, ,190 3, ft oom 190 ft oom 32 24, , ,000 24, ,000 24,000 24,000 24,000, ,000 21,000 24,000,000 18, ,000,650 24,000 15,100,000 18, ,000 19,570 24,000 14,3,000 11,500 17, ,000 18,690 23,280 13,660 18,930 10,950 16, ,4 17,900 21,6 13,090 17,590 10,470 15,160 8,810 70,3 17,190,190 12,560 16,4 10,030 14,130 8, ,0 16,510 18,6 12,050 15,3 9,610 13,160 8, ,860 15,960 17,060 11,6 14,4 9,230 12,360 7, ,5 15,450 15,710 11,260 13,6 8,9 11,660 7, ,3 14,570 14,500 10,910 12,910 8,610 11,0 7, ,2 13,4 13,380 10,580 12,230 8,330 10,4 6, ,270 12,450 10,310 11,660 8,090 9,9 6, ,460 11,590 11,150 7,870 9,450 6, ,690 10,8 10,670 7,690 9,030 6, ,980 10,110 10,0 8,610 6, ,470 9,590 8,280 5, ,860 9,010 7, ,480 7, ,800 7,0 1 7, , , ,0 18, ,6 18,250 18,560 18,470 18, ,250 17,870 18,160 15,100 18,070 17, ,870 17,5 17,810 14,660 17,700 17, ,4 17,150 16,710 14,190 16,930 11,0 17, ,850 15,5 15,1 13,800 15,3 10,730 15,470 8, ,490 14,080 13,730 13,4 13,930 10,4 14,060 8, ,270 12,850 12,5 13,090 12,690 10,160 12,830 8, ,150 11,660 11,370 12,050 11,550 9,870 11,680 8, ,0 10,670 10,4 11,0 10,580 9,630 10,710 7, ,3 9,780 9,5 10,1 9,7 9,410 9,830 7, ,570 8,970 8,770 9,3 8,9 9,190 9,030 7, ,8 8,0 8,0 8,530 8,170 8,810 8,260 7, ,0 7,530 7,380 7,8 7,510 8,130 7,580 7, ,630 6,9 6,790 7,230 6,900 7,490 6,9 6, ,0 6,370 6,190 6,650 6,300 6,870 6,370 6, ,460 5,790 5,6 6,080 5,750 6,300 5,8 6, ,890 5,2 5,070 5,510 5,0 5,730 5,260 5, ,380 4,690 4,580 4,980 4,710 5,2 4,780 5, ,9 4,210 4,1 4,490 4,250 4,730 4,3 4, ,460 3,680 4,030 3,810 4,290 3,900 4, ,210 3,370 3,830 3,480 4, ,410 3,080 3, ,2 13

15 LMSHELL oom: Welded lattice construction using tubular, high-tensile steel chords with pin connections between sections. asic boom length: ft (12.2 m) Max. boom length: 100 ft (30.5 m) Limit on clamshell bucket weight: 4,600 lb (2,100 kg) Optional tagline: hydraulic operated type and spring type oom omponent hart oom length ft (m) oom arrangement (12.2) ase-tip 50 (15.2) ase--tip 60 (18.3) ase---tip, ase--tip 70 (21.3) ase---tip 80 (24.4) ase----tip, ase---tip 90 (27.4) ase---tip 100 (30.5) ase----tip ase = ft (6.10 m) Insert: = 10 ft (3.05 m) = ft (6.10 m) = ft (12.2 m) Tip = ft (6.10 m) enter of Rotation 1. Figures represent maximum allowable capacity, and assume level, ground and ideal working conditions. 2. apacities are calculated at 66% of the minimum tipping loads. 3. apacities are maximum recommended by PS Standard #4. llowances must be made by the user for such unfavorable conditions as a soft or uneven supporting surface, rapid cycle operations, or bucket suction. 4. The combined weight of the bucket and load must not exceed these capacities. 5. oom length for clamshell operation should not exceed 100 ft (30.5 m). 14

16 Rated No. of ounterweight: 1 Position of rawlers: Extended oom oom Rated Length ngle (degree) (lbs) , , , , , , , , , ,0 oom oom Rated Length ngle (degree) (lbs) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,000 15

17 Rated No. of ounterweight: 1 Position of rawlers: Extended oom oom Rated Length ngle (degree) (lbs) , , , , , , , , , , , , , , , , , , , ,0 oom oom Rated Length ngle (degree) (lbs) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,600 16

18 TRNSPORTTION K1000 Transportation Style 1 ase Machine, oom ase with rawlers Weight: 99,770 lbs (45,250 kg) imensions:11 4 height width length (3,450 mm 3,610 mm 12,170 mm) K1000 Transportation Style 2 Self-Erecting ondition ase Machine, oom ase without rawlers Weight: 71,100 lbs (32,250 kg) imensions:10 0 height 11 6 width 42 5 length (3,060 mm 3,500 mm 12,930mm) K1000 Transportation Style 3 ase Machine with rawlers Weight: 96,780 lbs (43,900 kg) imensions: 11 4 height width 27 7 length (3,450 mm 3,610 mm 8,410 mm) ooms oom Tip: 2,580 lbs (1,170 kg) 4 10 height 4 11 width 22 8 length (1,480 mm 1,505 mm 6,910 mm) Hook block is not included in self-erecting package arbody ounterweights arbody ounterweights: 4,410 lbs (2,000 kg) height 4 3 width 4 9 length (590 mm 1,300 mm 1,450 mm) oom ase: 2,510 lbs (1,1 kg) 5 7 height 4 11 width 19 7 length (1,690 mm 1,490 mm 5,170 mm) Other ttachments ttachment Weights imensions (H W L) 10ft Insert oom: 680 lbs (310 kg) (1,290 mm 1,490 mm 3,165 mm) ft Insert oom: 1,150 lbs (5 kg) (1,290 mm 1,490 mm 6,210 mm) ft Insert oom: 2,1 lbs (960 kg) (1,290 mm 1,490 mm 12,305mm) Jib Tip: 6 lbs (280 kg) (790 mm 790 mmv 4,960 mm) Jib ase: 4 lbs (0 kg) (790 mm 790 mm 4,810 mm) 10ft Insert Jib: 2 lbs (100 kg) (790 mm 790 mm 3,1 mm) ft Insert Jib: 0 lbs (180 kg) (790 mm 790 mm 6,160 mm) Jib Strut 550 lbs (250 kg) 2 2" (6 mm 8 mm 3,6 mm) Upper Spreader: 600 lbs (270 kg) (680 mm 270mm 1,580 mm) ounterweights ounterweight () Weight: 27,300 lbs (12,0 kg) 5 6 height 1 11 width length (1,670 mm 570 mm 3,600 mm) ounterweight () Weight: 8,160 lbs (3,700 kg) imensions: 5 6 height 1 width length (1,660 mm 300 mm x 3,600 mm) ounterweight () Weight: 27,560 lbs (12,500 kg) imensions: 5 4 height 3 width length (1,6 mm 910 mm 3,600 mm) () () () 17

19 Note: ue to our policy of continual product improvements all designs and specifications are subject to change without advance notice. 3-13, Nihonbashi 1-chome, huo-ku, Tokyo, JPN Tel: ++81(0) Fax: ++81 (0) KOELO MERI IN South Kirkwood rive Stafford, Texas U.S.. Tel: (281) Fax: (281)