Manitowoc Product Guide. Features. View thousands of Crane Specifications on FreeCraneSpecs.com

Transcription

1 Manitowoc 000 Product Guide Features 750 t (5 USt) capacity No. 55A boom with MAX-ER 00 t (0 USt) capacity No. 55 boom 9 09 mton-m (5,505 ft-kips) maximum load moment with MAX-ER 97,5 m (30 ft) No. 55 boom 9,3 m (90 ft) No. 79A luffing jib on No. 55 boom 7 kw (00 P) engine

2 Features EPIC Manitowoc s field-proven Electronically Processed Independent Controls (EPIC) system delivers high productivity and precise load control by instantly matching a crane s commands to the crane function. EPIC's microprocessor maximizes a Manitowoc crane's function capability and simplifies servicing by pinpointing any problem in the crane's engine, power transmission and other operating systems. In addition, EPIC increases versatility by easily tailoring a Manitowoc crane s operation for specialized applications, with or without attachments. EPIC is a key reason no other crane can match the performance and reliability of Manitowoc. ydraulics Our closed-loop system provides a separate hydraulic circuit to power each crane function. The result is truly independent, variable-speed operation of the swing, load hoist, boom hoist and travel functions. FACT Connectors Manitowoc s Fast Aligning Connection Technology (FACT) automatically aligns crane components for fast, easy assembly. Crawler Drive Shafts These eliminate the need to disconnect hydraulic systems for shipment simplifying crawler removal and assembly.

3 Contents Specifications Outline dimensions 9 Crane assembly 5 Performance data combinations 5 eavy-lift boom range / load charts Upper boom point range / load charts 3 Fixed Jib range / load charts 3 uffing jib range / load charts 37 MAX-ER complete information 5 Manitowoc Crane Care 0

4 Specifications Upperworks Engine Cummins Model QSX 5 Diesel, cylinder, 7 kw (00 00 governed RPM. Includes engine block heater (0V), ether starting aid, transmission disconnect clutch for cold weather starting, high silencing muffler, hydraulic oil cooler, radiator and fan. Multiple hydraulic pump drive transmission provides independent power for all machine functions. Two volt maintenance-free batteries, 300 CCA at - C (0 F), volt system and 75 amp alternator. One diesel fuel tank, 00 l (75 gal.), mounted on rear of upperworks, with level indicator in operator s cab. Optional: Cold-weather package with heater for fluids, brake pedals, batteries and computer display. ydraulic reservoir has a capacity of l (3 gal.) and is equipped with a breather, clean out access, and internal diffuser. Each function is equipped with relief valves to protect the hydraulic circuit from overload or shock. System includes oil cooler and replaceable, ten-micron absolute full flow filter. All oil is filtered before entering the hydraulic pumps. System kg/cm (psi) lpm (gpm) Main oisting Drum (,000) 77 Main oisting Drum (,000) 77 Whip Drum (,000) 37 (00) oist (,000) 05 (0) Standard Dual Swing (,000) 30 (0) Quad Swing (,000) 05 (0) eft Crawler (,000) 37 (00) Right Crawler (,000) 37 (00) Mast oist (,000) 37 (00) Optional uffing oist (,000) 05 (0) ydraulic system also includes pump transmission disconnect and hydraulic oil cooler. Controls Modulating electronic-over-hydraulic controls provide infinite speed response directly proportional to control lever movement. Controls include Manitowoc s exclusive EPIC (Electronically Processed Independent Control) system with CAN-BUS technology providing microprocessor driven control logic, pump control, onboard diagnostics, and service information. Block-up limit control is standard for hoist and whip lines. Integrated wireless oad Moment Indicator system (MI) offers standard load link for main boom and upper boom point. Function cut-out or warning only operation is selected via the Operator Interface Display on the MI console. Travel and swing alarms are standard. Optional: Anemometer (wind speed indicator). s and jibs are prewired for anemometer. ydraulic system Multiple high-pressure piston pumps, driven by a multi-pump transmission, provide independent closed-loop hydraulic power for the hoisting drums, boom hoist, swing, left crawler and right crawler. Drums Basic machine is equipped with one (No. 55/79A ) or two (No. 55 or No. 55A ), cm (9-/") wide,,5 cm (5-3/") diameter hoist drums, one in the 3,0 m (0') boom insert and one in the boom butt. Each end of each drum is driven by a variable-displacement hydraulic motor through a planetary reduction. Each drum drive is equipped with a bi-directional drum brake. Whip drum is, cm (3-3/") wide and, cm (5-/") diameter, grooved for mm wire rope and driven by a variable-displacement hydraulic motor through a planetary reduction. Drum rotation indicator for each drum is standard. Bolt-on (shell-type), cm (9-/") laggings for mm or 3 mm dia. wire rope for liftcrane applications. Swing system Bearing adapter-mounted independent swing is powered by a fixed-displacement hydraulic motor coupled to an internal brake and planetary reduction. Includes Manitowoc Patented swing lock. Two swing drives required for standard machine configuration. Four swing drives required for MAX-ER. Swing system maximum speed:. rpm.

5 Specifications Mast hoist system Single drum mast hoist mounted in rotating bed is powered by a fixed displacement hydraulic motor and a planetary reduction gear box with internal brake. Ratcheting pawl is standard. Includes mast-hoist wire rope. hoist system Independent boom hoist, mounted in the mast butt has grooved drum mm (") wide and 355 mm (53-3/") diameter. Each end of drum is powered by a variabledisplacement hydraulic motor coupled to a planetary reduction gearbox with internal brake. Ratcheting pawl. rotation indicator, pressure roller and wire rope for - part boom hoist line are standard. hoist speed: raise,9 m (00') No. 55/79A main boom from 0 - in minutes, seconds. Raise 97,5 m (30') No. 55 main boom from 0 - in minutes, seconds. support system Moving Mast Moving mast is 9,m (30') long and connects to the fixed mast suspension rigging. When used with the optional self-erect package, the mast is utilized for crane assembly and disassembly. It is capable of lifting and positioning the crawler assemblies. Fixed Mast Stationary No. 5 lattice mast provides geometry to raise and support all boom lengths. 30,5 m (00') mast standard for basic crane;,7 m (0') mast required for MAX-ER applications. -hoist rope reeved from drum in mast butt through sheaves in mast top and boom-hoist equalizer forms -part boom-hoist rigging. igh-strength steel straps connect equalizer to boom top. Cushioned boom stop and automatic boom stop are standard. Counterweight Qty. Item Unit Weight Total Weight kg lb kg lb Carbody ower Box Tray Upperworks Upper Box Tray Includes connecting pins, brackets, and stops. Vision operator s cab The Vision Cab is a fully enclosed and insulated steel module mounted to the left front corner of rotating bed. Module is equipped with power tilt, sliding door, large safety glass windows on all sides and roof. Signal horn, power seat, all season climate control package, front and roof windshield wipers, dome light, sun visor and shade, fire extinguisher, swing and travel alarms, and radio/cd player are standard equipment. Operator s station swings over front of rotating bed for transportation. owerworks Carbody Connects rotating bed and crawler frames. Fabricated steel rotating bed lower module mounts to singlepiece carbody by a 3 m (9' 0") diameter triple-row roller bearing turntable. Each crawler frame is mounted to the carbody with FACT connection system poweractuated pins. Crawler drive motors are mounted on carbody, permitting crawler removal without opening travel drive hydraulic circuit. Crawlers ,000, ,000 Carbody total , ,000, , 50,000,000 Upperworks total ,000 Counterweight Total 3 7,000 Crawler assemblies are, m (3' 9") long with,5 m (5') wide cast steel crawler pads and lubricated intermediate rollers. Each crawler is powered independently by two variable displacement hydraulic motors and includes two hydraulically powered pin actuators for fast installation and removal from carbody. Carbody mounted drive motors are connected to crawler final reduction via drive shafts. Crawlers provide ample tractive effort allowing counter-rotation with full rated load. Maximum ground speed is, kph (0.7 mph). Manitowoc 000 5

6 Specifications Attachments No A boom The liftcrane is equipped with a 3, m (0') No. 55/79A tubular-chord boom consisting of a, m (0') No. 55 or No. 55A butt, 3,0 m (0') No. 55 or No. 55A insert,, m (0') No. 55 or No. 55A insert,, m (0') No. 55/79 transition insert with equalizer platform, and 9, m (30') No. 79A heavy-lift top with sixteen 7 mm (30") diameter roller bearing sheaves on one shaft. Includes rope guides, boom angle indicator, and a 7, t (30 USt) swivel hook and weight ball weighing 70 kgs (,00 lbs) for mm or 3 mm wire rope. The No. 55/79A boom utilizes steel suspension straps and Manitowoc s exclusive FACT connection system. Powered boom hinge system including cylinder, piping, operating controls, and locking device are standard. uffing jib preparation is standard. Optional:, m (0'), and, m (0') No. 79 boom inserts with steel boom suspension straps, and FACT connection system. Optional:, m (0') No. 55 or No. 55A boom insert with steel boom suspension straps, and FACT connection system. Optional:, m (0') No. 55 or No. 55A boom insert with luffing drum sheaves, steel boom suspension straps, and FACT connection system. Optional: Intermediate suspension, required for boom lengths of 09,7 m (30') or more. Optional: Detachable upper boom point with one 7 mm (30") diameter tapered roller bearing steel sheave with rope guard, for liftcrane use on heavy-lift boom top. (Same upper point used on Models 555, 777, 777T,, M-50, and 50.) No. 55 or No. 55A boom The liftcrane is equipped with a 3, m (0') No. 55 or No. 55A tubular-chord boom consisting of a, m (0') No. 55 or No. 55A butt, 3,0 m (0') No. 55 or No. 55A insert,, m (0') No. 55 or No. 55A insert,, m (0') No. 55 or No. 55A insert with equalizer platform, and 9, m (30') No. 55 or No. 55A heavy-lift top with sixteen 7 mm (30") diameter roller bearing sheaves on one shaft. Includes rope guides, boom angle indicator, and a 7, mt (30 ton) swivel hook and weight ball weighing 70 kgs (,00 lbs.). The No. 55 or No. 55A boom utilizes steel suspension straps and Manitowoc's exclusive FACT connection system. Powered boom hinge system including cylinder, piping, operating controls, and locking device are standard. uffing jib preparation is standard. Optional:, m (0'),, m (0') No. 55 or No. 55A boom inserts, and, m (0') No. 55 or No. 55A medium boom inserts with steel boom suspension straps, and FACT connection system. Optional:, m (0') No. 55 or No. 55A boom insert with luffing drum sheaves, steel boom suspension straps, and FACT connection system. Optional: Detachable upper boom point with one 7 mm (30") diameter tapered roller bearing steel sheave with rope guard, for liftcrane use on heavy-lift boom top. (Same upper point used on Models 555, 777, 777T,, M-50, and 50.) Optional: Detachable upper boom point with one 7 mm (30") diameter tapered roller bearing steel sheave with rope guard, for liftcrane use on No. 55 boom top or 79A luffing jib top. Utilize optional boom inserts in combination with the No. 55 or No. 55A basic boom for total lengths up to 97,5 m (30'). Optional: Extended upper boom point on boom 55/79A. Utilize optional boom inserts in combination with the No. 55/79A basic boom for total lengths up to,9 m (00').

7 Specifications No. luffing jib Optional: Components to make up,3 m (70') basic luffing jib include a, m (0') No. butt, 9, m (30') No. top, 5, m (50') jib strut with 7 sheaves,,3 m (7') main strut with 7 sheaves, jib strut stop, luffing jib stop, main luffing strut backstay straps, basic luffing jib steel rigging straps, combination upper point and luffing jib raising wheel, luffing drum assembly, 95 m (5') luffing drum wire rope, and wire rope guide(s) as required. Optional: 3,0 m (0'),, m (0'), and, m (0') No. inserts with steel boom suspension straps. Utilize optional luffing jib inserts in combination with the No. basic luffing jib for total lengths up to 73, m (0'). Note: Basic luffing jib, m (0') No. boom butt and 9, m (30') No. boom top can be used from 50 liftcrane. uffing jib also uses No. boom inserts and straps from 50 liftcrane for luffing jib lengths greater than,3 m (70'). No. 79A luffing jib Optional: Components to make up,3 m (90') basic luffing jib includes a, m (0') No. 79A butt,, m (0') No. 79 insert, 9, m (30') No. 79A top, jib strut, main strut, main jib strut stop, luffing jib stop, main luffing strut backstay straps, basic luffing jib steel rigging straps, upper point, luffing jib raising dolly, luffing drum assembly, luffing drum wire rope, and wire rope guide(s) as required. Optional:, m (0'), and, m (0') No. 79 inserts with steel boom suspension straps, and FACT connection system. Utilize optional luffing jib inserts in combination with the No. 79A basic luffing jib for total lengths up to 9,5 m (30'). Note: Basic luffing jib 9, m (30') No. 79A boom top can be used from No A boom. uffing jib also uses No. 79 boom inserts and straps from MAX-ER 000 liftcrane. No. 79A fixed jib Optional: Components to make up 5, m (50') basic fixed jib includes a, m (0') No. 79A butt, 9, m (30') No. 79A top, jib strut, backstay straps and jib support straps. Optional:, m (0'), and, m (0') No. 79 inserts with steel boom suspension straps, and FACT connection system. Utilize optional fixed jib inserts in combination with the No. 79A basic fixed jib for total lengths up to 33,5 m (0'). Note: Basic fixed jib 9, m (30') No. 79A boom top can be used from No A boom. Fixed jib also uses No. 79 boom inserts and straps from MAX-ER 000 liftcrane. The MAX-ER The MAX-ER attachment components include: One, m (0') No. 5 insert, added to increase the mast length to,7 m (0'). Two additional swing drives (for a total of four) mounted on the rotating module. Each swing drive is powered by a fixed-displacement hydraulic motor coupled to a planetary reduction gearbox and internal brake. A wheeled or hanging MAX-ER counterweight assembly attaches to the top of the mast by steel straps and to the rear of the upperworks by a shearframe and to the top of the moving mast by steel straps for the, m (0') counterweight position. The hanging MAX-ER counterweight is m (59') behind the crane's centerline of rotation, and the wheeled MAX-ER counterweight is, m (0') or m (59') behind the crane's centerline of rotation. The wheeled counterweight uses large off-road tires, which can be positioned for traveling or swinging. It also includes hydraulic support jacks and pads. Manitowoc 000 7

8 Specifications Optional equipment Optional: Self-erect system, includes: rotating bed jacking cylinders with pads, wireless controls, 9 t (00 ton) assembly block, crawler handling chains. Optional: Blocks and ooks Optional: Custom vinyl decal(s) of customer name and/or logo from artwork supplied by customer. Optional: Export Packaging: basic crane, boom and jib sections. MAX-ER export packaging available. 7, t (30 USt) swivel hook and weight ball 70 kgs (,00 lb) for mm or 3 mm wire rope. 50 t (75 UST) hook block 3 99 kgs (,750 lbs) with nine 7, cm (30") dia. roller bearing sheaves and duplex roller bearing swivel hook with hook latch and swivel lock for mm or 3 mm wire rope. 37 t (350 UST) hook block 79 kgs (7,00 lbs) with nine 7, cm (30") dia. roller bearing sheaves and duplex roller bearing swivel hook with hook latch and swivel lock for mm or 3 mm wire rope. 0 t (50USt) hook block 9 kgs (,300 lbs) with thirteen 7, cm (30") dia. roller bearing sheaves and duplex roller bearing swivel hook, hook latch, and swivel lock. For mm 3 mm wire rope. 50 t (500 USt) hook block 3 kgs (,500 lbs) with fifteen 7, cm (30") dia. roller bearing sheaves and duplex roller bearing swivel hook, hook latch and swivel lock for mm or 3 mm wire rope. 00 t (0 USt) hook block 35 kgs (5,00 lbs) with fifteen 7, cm (30") dia. roller bearing sheaves and duplex roller bearing swivel hook, hook latch and swivel lock for mm or 3 mm wire rope. 700 t (770 USt) hook block 97 kgs (,00 lbs) with seventeen 7, cm (30") dia. roller bearing sheaves and duplex roller bearing swivel hook, hook latch and swivel lock for mm or 3 mm wire rope. Optional: Preparation for MAX-ER. Optional: ydraulic Test Kit: required to properlyanalyze the performance of the EPIC control system. Optional: Service Interval Kits: for the regularly scheduled maintenance of general crane operations. Optional: ighting Packages: consult Factory for available options. Optional: Special Paint color(s) other than Manitowoc standard red and black.

9 Outline dimensions 37,5 m (3' ") 3,5 m (' ") 5,07 m (9' 5") 7, m (3' "),7 m (5' 0"),5 m (5' 0"),57 m (' 7"),0 m (' "),9 m (' 3"),07 m (' 0") 3, m (' 5") 5,00 m (' 5") 5, m (7' 0") 0, m (33' ") 9.0 m (9' 7") R 0, m (33' 5") TAISWING 3,00 m (9' 0") 5, m (9' "), m (3' 9") 5, m (5' 3"),05 m (5' "),5 m (5' 0") Manitowoc , m (' "),5 m (5' 0")

10 Outline dimensions iftcrane ength 3,59 m ' " Width 3,00 m 9' 0" eight,9 m ' 0" Weight kg 0,3 lb Weight 0 0 kg,335 lb Note: Weight includes rotating bed rear section with pin pullers, counterweight, live mast, mast-hoist with wire rope, maximum hoist and whip lines on drums, Cummins QSX5 powerplant upperworks jacking system, full hydraulic fluid reservoir, and half tank of fuel. Weight is with upperworks jacking system removed. Carbody and rotating bed ength 7,9 m 5' " Width 3,00 m 9'0" eight 3,33 m ' 0" Weight 3 99 kg 95,900 lb Note: Weight includes rotating bed adapter frame with bearing turntable, four swing drives, and carbody. Upperworks jacks x ength 3,9 m 0' 0" Width, m 3' 9" eight 0,3 m ' " Weight kg,05 lb Note: Shown in horizontal, retracted shipping position. Crawlers x ength, m 3' 9" Width,0 m 7' 3" eight,07 m ' 0" Weight 0 03 kg,5 lb W Carbody counterweight tray x ength, m ' " Width,39 m 7' 0" eight,30 m ' " Weight 700 kg,000 lb W ower counterweight x ength,59 m ' " Width 3,5 m ' " eight 0,5 m ' " Weight 9 95 kg,000 lb 0 Option

11 Outline dimensions Upper counterweight tray x ength, m 9' " Width 3, m 0' " eight,3 m 7' 0" Weight 5 5 kg,050 lb W W Upper counterweight x ength,5 m ' " Width, m ' 7" eight 0, m ' " Weight kg,000 lb No. 5 mast butt and top package, drum, wire rope, equalizer x ength 5, m 9' 7" Width 3,00 m 9' 0" eight,79 m 9' " Weight 5 kg 57,75 lb No. 5 mast insert, m (0') and straps x ength,30 m 0' " Width 3,00 m ' " eight,9 m 9' 0" Weight 3 50 kg,90 lb No. 5 mast insert, m (0') and straps x ength,5 m 0' 0" Width 3,00 m ' " eight,9 m 9' 0" Weight 33 kg 3,90 lb No. 55 or No. 55A boom butt, m (0') with drum, rigging winch and wire rope x ength, m ' 9" Width 3,00 m 9' 0" eight 3,0 m 0' " Weight 5 kg 57,75 lb Manitowoc 000 Option

12 Outline dimensions No. 55 or No. 55A boom top 9, m (30') x ength 0,09 m 33' " Width 3,00 m 0' " eight 3,0 m ' " Weight 7 37 kg 37,7 lb No. 55 or No. 55A boom insert 3,0 m (0') with drum and wire rope x ength,35 m 0' 0" Width 3,00 m 9' 0" eight 3,0 m 0' " Weight,3 kg 35,90 lb No. 55 or No. 55A boom insert, m (0') x ength,35 m 0' 0" Width 3,00 m 9' 0" eight 3,0 m 0' " Weight 0 kg 0,75 lb No. 55 or No. 55A boom insert, m (0') x ength,37 m 0' 7" Width 3,00 m 9' 0" eight 3,0 m 0' " Weight 3 kg,5 lb No. 55/79A transition insert and straps, m (0') x ength,37 m 0' 7" Width 3,00 m 9' 0" eight 3,0 m 0' " Weight 90 kg 9,0 lb No. 79A boom top 9, m (30') x ength 0,05 m 33' 0" Width 3,00 m 9' 0" eight 3,0 m ' 3" Weight 5 kg 7,35 lb Option

13 Outline dimensions No. 79 boom insert, m (0') x ength,7 m 0' 7" Width 3,00 m 9' 0" eight 3,09 m 0' " Weight kg 7,35 lb No. 79 boom insert, m (0') x ength,37 m 0' 7" Width 3,00 m 9' 0" eight 3,09 m 0' " Weight 5 97 kg 3,0 lb Extended upper boom point 7, m (5') x ength 0,9 m 3' 5" Width,70 m ' 0" eight,3 m 7' " Weight 5 9 kg,0 lb No. 79 luffing jib butt, m (0') x ength,3 m ' 9" Width 3,00 m 9' 0" eight 3,09 m 0' " Weight 3 57 kg 9, lb No. 79 luffing jib main masts, m (0') x ength,5 m 53' 0" Width,5 m ' 3" eight,3 m 7' 9" Weight 0 5 kg 3,5 lb No. luffing jib butt, m (0') x ength,7 m ' " Width 3,00 m 9' 0" eight 3,00 m 9' 0" Weight 5 9 kg,50 lb No. luffing jib masts, m (0') x ength,5 m 53' 0" Width,5 m ' 3" eight,3 m 7' 9" Weight 0 5 kg 3,5 lb Manitowoc Option

14 Outline dimensions No. boom top 9, m (30') and wire rope guide, straps, lower point x ength 0,0 m 33' 0" Width,59 m ' " eight,90 m 9' " Weight 5 57 kg,75 lb No. luffing jib insert 3,0 m (0') x ength 3.3 m 0' 7" Width,59 m ' " eight,59 m ' " Weight 57 kg,90 lb No. luffing jib insert, m (0') x ength, m 0' 7" Width,59 m ' " eight,59 m ' " Weight 5 kg 3,5 lb No. luffing jib insert, m (0') x ength,3 m 0' 7" Width,59 m ' " eight,59 m ' " Weight 5 kg 5,0lb No. 79A fixed jib butt, m (0') x ength,5 m ' 5" Width 3,00 m 9' 0" eight 3,0 m 9' " Weight kg 9,0 lb No. 79A fixed jib strut, m (0') x ength 9, m 3' " Width,97 m 9' 9" eight.9 m 9' 7" Weight kg,0 lb Option

15 Crane assembly Manitowoc 000 5

16 Crane assembly

17 Crane assembly Manitowoc 000 7

18 Performance data Wire rope lengths - tandem drums - mm hoist line boom No. 55 or No. 55A Whip line oist line or boom and fixed jib length Drum 3 ( part of line) Drum 3 ( parts of line) Drum Drum Total parts of line oist reeving for main load block two lead lines - mm boom No. 55 or No. 55A No. parts of line Maximum load kg (lb) ,000 m (ft) m (ft) m (ft) m (ft) ,500 3, (0) 9 30 (5) 579 (900) 579 (900) ,000,7 (0) 99 (35) 5 (75) 7 (00) 7 (00) ,00, (0) (375) (550) 7 (500) 7 (500) ,000 5,9 (0) (00) 3 (00) 53 (00) 53 (00) 55 00,00,00,0 37 (50) 0 (75) 53 (00) 53 (00) 7, (0) 5 (500) (75) 9 (3000) 9 (3000) 73, (0) 0 (55) 3 (775) 975 (300) 975 (300) 79, (0) 75 (575) 59 (50) 975 (300) 975 (300) 0 5,3 (0) 3 (00) 7 (900) 975 (300) 975 (300) 0 9, 9 (50) 97 (975) 975 (300) 975 (300) 97,5 (30) 3 (700) 3 (05) 975 (300) 975 (300) NOTE: Above hoist line lengths are based on tandem drums both reeved to the main load block. Each drum is dead-ended in main load block reeving. Total parts of line requires using both drums and. oist and whip line lengths will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Wire rope lengths - single hoist drum - mm hoist line boom No. 55 or No. 55A length 3, (0),7 (0), (0) 5,9 (0),0 7, (0) 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) m Whip line - drum or 3 oist line - drum part (ft) (35) (375) (00) (50) (500) (55) (575) (00) (50) (700) m part (ft) (5) (75) (550) (00) (75) (75) (775) (50) (900) (975) (05) m (ft) (3900) (500) (00) (00) (00) (00) (00) (00) (00) (00) (00) Maximum parts of line for full hoisting range oist reeving for main load block single lead line - mm boom No. 55 or No. 55A No. parts of line Maximum load kg (lb) , , , , , , , , , , , , ,00 NOTE: Above hoist line lengths are based on single part lead line. oist and whip line lengths will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required ,300 5,00 99,00

19 Performance data Wire rope lengths - tandem drums - 3 mm hoist line boom No. 55 or No. 55A Whip line oist line length 3, (0),7 (0), (0) 5,9 (0),0 Drum 3 ( part of line) m (ft) (35) (375) (00) (50) Drum 3 ( parts of line) m (ft) (5) (75) (550) (00) (75) m Drum (ft) (900) (900) (00) (00) (300) m Drum (ft) (900) (900) (00) (00) (300) Total parts of line 0 0 oist reeving for main load block two lead lines - 3 mm boom No. 55 or No. 55A No. parts of line 0 Maximum load kg (lb) , , , , ,7, ,3,00 7, (0) 5 (500) (75) 70 (300) 70 (300) 73, (0) 0 (55) 3 (775) 70 (300) 70 (300) 79, (0) 75 (575) 59 (50) 73 (00) 73 (00) 5,3 (0) 3 (00) 7 (900) 79 (00) 79 (00) 9, 9 (50) 97 (975) 79 (00) 79 (00) 97,5 (30) 3 (700) 3 (05) 79 (00) 79 (00) NOTE: Above hoist line lengths are based on tandem drums both reeved to the main load block. Each drum is dead-ended in main load block reeving. Total parts of line requires using both drums and. oist and whip line lengths will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Wire rope lengths - single hoist drum - 3 mm hoist line boom No. 55 or No. 55A length 3, (0),7 (0), (0) 5,9 (0),0 7, (0) 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) m Whip line - drum or 3 oist line - drum Part (ft) (35) (375) (00) (50) (500) (55) (575) (00) (50) (700) m Part NOTE: Above hoist line lengths are based on single part lead line. oist and whip line lengths will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required. (ft) (5) (75) (550) (00) (75) (75) (775) (50) (900) (975) (05) m (ft) (3700) (3700) (3700) (3700) (3700) (3700) (3700) (3700) (3700) (3700) (3700) Maximum parts of line for full hoisting range oist reeving for main load block single lead line - 3 mm boom No. 55 or No. 55A No. parts of line 0 0 Maximum load kg (lb) 70 97, , , ,00 350, , , , , ,00 50,033, ,, ,97, ,77,500 Manitowoc 000 9

20 Performance data Wire rope specifications 5: safety factor - 3 mm hoist line - boom No. 55 or No. 55A Function MCC part number Rotation resistant, right hand lang lay wire rope with spelter button (except 795) and pad eye oist line (Drum ) A0005 oist or whip line (Drum ) A0005 Whip line (Drum 3) 795 Maximum spooling capacities Drum (hoist line) 3 mm wire rope* Drum (oist or Whip ine) (3 mm) Wire Rope* Drum 3 (Whip ine) mm wire rope 05 m (3,330 ft) 9 layers 05 m (3,330 ft) 9 layers 579 m (,900 ft) layers Size wire rope Minimum breaking strength Maximum load per line 3 mm 0 0 kg (,000 lb) 3 mm 0 0 kg (,000 lb) 0 kg (,00 lb) mm 370 kg (79,00 lb) 3 0 kg (30,000 lb) *7 m (3 ft) is deducted from maximum spooling capacities for 3 dead wraps per drum. Refer to Drum and agging Chart No. 5-A and oad Block Reeving Folio No. 03 Approximate weight 5.57 kg/m (3.7 lb/ft) 5.57 kg/m (3.7 lb/ft). kg/m (.7 lb/ft) Wire rope lengths - single hoist drum - mm hoist line boom No A length 3, (0),7 (0), (0) 5,9 (0),0 7, (0) 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) 03, (30) 09,7 (30) 5, (30) m Whip line - drum or 3 oist line - drum part part (ft) (35) (375) (00) (50) (500) (55) (575) (00) (50) (700) (75) (775) (00) m (ft) (5) (75) (550) (00) (75) (75) (775) (50) (900) (975) (05) (075) (50) m (ft) (3900) (500) (00) (00) (00) (00) (00) (00) (00) (00) (00) (00) (00) (00) Maximum parts of line for full hoisting range oist reeving for main load block single lead line - mm boom No A No. parts of line Maximum load kg (lb) , , , , , , , , , , , , , , ,000,000,9 (00) 59 (50) 39 (75) 3 (00) NOTE: oist and whip line lengths will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required. 0

21 Performance data Wire rope specifications 5: safety factor - mm boom No. 55 or No. 55A and boom No A Rotation resistant, right hand lang lay wire rope with pad eye Function MCC part number oist line (Drum ) 795 oist or whip line (Drum ) 795 Whip line (Drum 3) 795 Maximum spooling capacities Drum (hoist line) mm wire rope* Drum (hoist or whip line) ( mm) wire rope* Drum 3 (whip line) mm wire rope 0 m (,73 ft) layers 0 m (,73 ft) layers 579 m (,900 ft) layers Size wire rope Minimum breaking strength Maximum load per line Approximate weight mm 370 kg (79,00 lb). kg/m (.7 lb/ft) mm 370 kg (79,00 lb) 0 kg (35,00 lb). kg/m (.7 lb/ft) mm 370 kg (79,00 lb) 3 0 kg (30,000 lb). kg/m (.7 lb/ft) *7 m (3 ft) is deducted from maximum spooling capacities for 3 dead wraps per drum. Refer to Drum and agging Chart No. 5-A and oad Block Reeving Folio No. 003 for No. 55 or 55A. Refer to Drum and agging Chart No. 5-A and oad Block Reeving Folio No. 03 for No A. Drum and lagging chart - liftcrane Application Drum number and location Drum part number Drum type Drum diameter Drum width Grooved lagging part number agging diameter Minimum wire rope size oist Drum (boom insert) A053 Bare 5 mm (5-3/") mm (9-/") A050 A mm (-/") 7 mm (-/") mm 3 mm oist or whip Drum (boom butt) A053 Bare 5 mm (5-3/") mm (9-/") A050 A mm (-/") 7 mm (-/") mm 3 mm Whip Drum 3 (rotating bed) A0530 Grooved mm (5-/") mm (3-3/") mm Drum identification Drum number Function 3 Main load drum standard Main/auxiliary load drum standard Whip hoist standard 3 hoist standard 5 Mast hoist standard uffing jib drum optional 7 Rigging winch optional (not shown, located in butt) 5 Manitowoc 000

22 Performance data Wire rope lengths - single hoist drum - 3 mm hoist line boom No A length 3, (0),7 (0), (0) 5,9 (0),0 7, (0) 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) 03, (30) 09,7 (30) 5, (30),9 (00) m Whip line - drum or 3 oist line - drum part (ft) (35) (375) (00) (50) (500) (55) (575) (00) (50) (700) (75) (775) (00) (50) m part (ft) (5) (75) (550) (00) (75) (75) (775) (50) (900) (975) (05) (075) (50) (75) m (ft) (900) (3500) (3700) (3700) (3700) (3700) (3700) (3700) (3700) (3700) (3700) Maximum parts of line for full hoisting range oist reeving for main load block single lead line - 3 mm boom No A No. parts of line 0 0 Maximum load kg (lb) 70 97, , , ,00 350, , , , , , ,000,000 NOTE: oist and whip line lengths will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Wire rope lengths - single hoist drum - mm hoist line boom No A with 7. m (5 ft) extended upper boom point Whip line - drum or 3 oist line - drum length,0 7, (0) 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) 03, (30) 09,7 (30) 5, (30),9 (00) m part part (ft) (500) (550) (575) (5) (75) (700) (750) (775) (5) (75) (900) m (ft) (750) (00) (50) (95) (975) (05) (00) (50) (5) (75) (35) m (ft) (300) (500) (700) (900) (3000) (300) Total parts of line oist reeving for main load block single lead line - mm boom No A with 7. m (5 ft) extended upper boom point No. parts of line Maximum load kg (lb) , , , ,000 NOTE: oist and whip line lengths will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required.

23 Performance data Wire rope lengths - single hoist drum - 3 mm hoist line boom No A with 7. m (5 ft) extended upper boom point length,0 7, (0) 73, (0) m 5 75 Whip line - drum or 3 part part (ft) (500) (550) (575) m 9 59 (ft) (750) (00) (50) m oist line (ft) (700) (00) (000) Total parts of line oist reeving for main load block single lead line - 3 mm boom No A with 7. m (5 ft) extended upper boom point No. parts of line Maximum load kg (lb) 70 97, , ,00 79, (0) 9 (5) (95) 0 5,3 (0) 0 (75) 97 (975) 7 (00) 9, 97,5 (30) 03, (30) 09,7 (30) 5, (30),9 (00) (700) (750) (775) (5) (75) (900) (05) (00) (50) (5) (75) (35) (00) (500) (700) (00) (00) (00) Working weight 30,5 m (00') No. 5 mast with 3, m (0') No. 55 or No. 55A main boom, upper boom point, t (00 USt) hook block. kg(lb) (,53,70) NOTE: oist and whip line lengths will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required. 30,5 m (00') No. 5 mast with 3, m (0') No. 55/79A main boom upper boom point, 5 t (500 USt) hook block (,7,930) Wire rope specifications 5: safety factor - 3 mm hoist line - boom No A Typical working weight includes hydraulic reservoir full, fuel half-full, drums with standard lengths of wire rope, upper boom point and 7 t (30 USt) hook and weight ball. Rotation resistant, right hand lang lay wire rope with spelter button (except 795) and pad eye Function MCC part number Size wire rope Minimum breaking strength Maximum load per line oist ine (Drum ) A mm 0 0 kg (,000 lb) oist or Whip ine (Drum ) A mm 0 0 kg (,000 lb) 0 kg (,00 lb) Whip ine (Drum 3) 795 mm 370 kg (79,00 lb) 3 0 kg (30,000 lb) oist reeving for jib load block single lead line - mm boom No A and No. 55* or No. 55A* No. parts of line Maximum load kg (lb) , ,500 Approximate weight 5.57 kg/m (3.7 lb/ft) 5.57 kg/m (3.7 lb/ft). kg/m (.7 lb/ft) , , ,00 Maximum spooling capacities Drum (hoist line) 3 mm wire rope* Drum (whip line) 3 mm wire rope* Drum 3 (whip line) mm wire rope 05 m (3,330 ft) 9 layers 05 m (3,330 ft) 9 layers 579 m (,900 ft) layers * 0* * *,00 9,00 55,00 7,00* 50,00* * Only for No. 55 or No. 55A with fixed jib 79A *7 m (3 ft) is deducted from maximum spooling capacities for 3 dead wraps per drum. Refer to Drum and agging Chart No. 5-A and oad Block Reeving Folio No. 03 Manitowoc 000 3

24 Performance data Wire rope lengths - mm hoist line liftcrane - luffing jib No. on boom No A hoist line drum wire 0 m (,00 ft) length uffing jib,3 (70), (0) 7, (90) 30,5 (00) 33,5 (0) 3, (0) 39, (30),7 (0) 5,7 (50), (0) 5, (70) 5,9 (0) 57,9 (90),0,0 (0) 7, (0) 70, (30) 73, (0),7 (0) 0 0 0, (0) ,9 (0) , , (0) , (0) , (0) 0 0 5, (0) NOTE: Whip line lengths given in table will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Wire rope lengths - mm hoist line liftcrane - luffing jib No. on boom No A length Whip line - drum or 3 liffing jib length part part,0 (0) 7, (0) 70, (30) 73, (0) 7, (50) 79, (0) 73, (70) 79, (0) 5,3 (90) 9, 9,5 (30) 97,5 (30) 00, (330) 03, (30) 0,7 (350) 09,7 (30), (370) 5, (30),9 (390),9 (00) 5,0 (0),0 (0) 3, (30) 3, (0) 37, (50) 0, (0) 3,3 (70),3 (0) 9, (90) 5, (500) 55,5 (50) 5,5 (50) m (ft) (0) (500) (50) (50) (50) (50) (00) (0) (0) (0) (0) (700) (70) (70) (70) (70) (00) (0) (0) (0) (0) (900) (90) (90) (90) (90) (000) (00) (00) (00) (00) (00) m (ft) (75) (750) (775) (5) (50) (75) (900) (95) (950) (000) (05) (050) (075) (00) (5) (75) (5) (50) (75) (35) (350) (375) (00) (5) (50) (500) (55) (550) (575) (00) (5) NOTE: Whip line lengths given in table will allow hook to touch ground. When hook travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required.

25 Performance data Wire rope lengths - single hoist drum mm hoist line liftcrane - fixed jib No. 79A on boom No. 55 or No. 55A oist line - drum Whip line maximum parts of line drum or 3 length part part Jib length oist line drum,7 (0), (0) 5,9 (0),0 7, (0) 5, (50) 0,3 (70) 7, (90) 33,5 (0) 50 (00) 50 (00) 3 (00) 3 (00) 0 (00) 75 (575) 3 (00) 9 (50) 9 (50) 9 (50) 5 (5) 7 (900) 90 (950) 90 (950) 90 (950) NOTE: oist and whip line lengths will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Wire rope lengths - single hoist drum - mm hoist line liftcrane - fixed jib No. 79A on boom No. 55 or No. 55A oist line - drum Maximum parts of line length m (ft), (0) 5,9 (0),0 7, (90) 33,5 (0) 39, (30) 5,7 (50) 5, (70) oist line Jib length drum 57,9 (90) NOTE: Above hoist line lengths are based on single part lead line ,0 (0) 0 70, (30) 7, (50),3 (70), (90) 9,5 (30) 3 3 (00) 33 (700) Performance for main hoist (drum #) and also auxiliary hoist (drum #) mm wire rope - layers maximum working - lagging groove root diameter.5 inches Single line speed in per minute ayer Single line pull radius Single line pull kg (lb) 37 mm (.") 399 mm (5.7") 3 7 mm (.") 55 mm (7.9") 5 3 mm (9.0") 5 mm (0.") 7 53 mm (.") 5 mm (.3") 9 59 mm (3.") 0 5 mm (.") 50 mm (5.") 0 (0) 9 (309) 0 (333) 09 (35) (379) 3 (0) 30 () 37 (9) (7) 5 (9) 5 (59) 5 (5) 53 (0,000) 90 (95) 9 (3) 03 (337) 09 (35) 5 (37) (399) (9) 3 (39) 0 (59) (79) 5 (9) 9 07 (0,000) 5 (0) 9 (99) 97 (3) 03 (33) 0 (35) 3 (37) 9 (39) 3 (05) 9 () 33 (3) 3 () 3 07 (30,000) () (3) 9 (93) 9 (97) 9 (30) 93 (30) 95 (3) 9 (35) 9 (30) 99 (3) 00 (39) 39 (35,00) 75 (7) 77 (5) 7 (5) 0 () (5) (70) (7) 5 (79) (3) () 9 (9) Manitowoc 000 5

26 Performance data Performance for main hoist (drum #) and also auxiliary hoist (drum #) 3 mm wire rope - 9 layers maximum working - lagging groove Root diameter.5 inches single line speed in per minute ayer Single line pull radius Single line pull kg (lb) 37 mm (.") 0 mm (.0") 37 mm (7.") 70 mm (.5") 500 mm (9.7") 533 mm (.0") 5 mm (.3") 570 mm (3.5") 30 mm (.") 0 (0) 95 (3) 03 (33) (3) 9 (39) 7 (7) 35 () (7) 5 (97) 0 (5) 53 (0,000) 90 (9) 9 (30) 05 (3) (3) 9 (39) (5) 3 (3) 0 (0) 7 (3) 9 07 (0,000) () 9 (303) 99 (3) 05 (35) (35) 7 (35) 3 (0) 9 (3) 33 (37) 3 07 (30,000) (7) 7 () 90 (9) 9 (99) 93 (305) 9 (30) 9 (35) 9 (30) 99 (35) (0,000) 9 () 7 (33) 73 (3) 7 (3) 7 () 77 (5) 79 (59) 0 () 7 (5) 35 (,00) (99) (03) 3 (0) 5 (3) 7 () (3) 9 () 7 (3) 73 (39) Performance for whip (drum #3) - mm wire rope layers maximum working - drum barrel groove root diameter 5.5 inches Single line speed in per minute ayer Single line pull radius Single line pull kg (lb) 335 mm (3.") 33 mm (.3") 3 39 mm (5.") 9 mm (.5") 5 7 mm (7.") 0 mm (.") mm (9.") 53 mm (0.9") 0 (0) 5 (79) 9 (30) 99 (35) 0 (30) 3 (37) 0 (395) (9) 35 () (5,000) (7) () 9 (30) 0 (330) 07 (35) 3 (37) 9 (39) (3) 53 (0,000) 7 (55) (75) 90 (9) 95 (3) 0 (33) 0 (3) (3) 7 (33) 0 (5,000) 7 () 0 () 5 (7) 9 (9) 90 (9) 9 93 (305) 9 (309) 9 07 (0,000) () 9 () 70 (3) 7 (35) 73 (0) 7 () 7 (9) 77 (53) 30 (5,000) 57 () 59 (93) 0 (97) (0) 3 (0) () (5) 9 () 3 07 (30,000) 5 () 5 (70) 53 (75) 55 (79) 5 () 57 () 59 (93) 0 (97)

27 combinations No. 55 or No. 55A boom combinations length 3, (0),7 (0), (0) 5,9 (0),0 7, (0) 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) inserts 3,0 m (0 ft), m (0 ft), m (0 ft) No. 79A fixed jib combinations Fixed jib ength 7, (50) 33,5 (70) 39, (90) 5,7 (0) Fixed jib inserts, m, m (0 ft) (0 ft) NOTE: 3, m (0') basic boom consists of, m (0') butt, 3,0 m (0') insert with drum,, m (0') insert,, m (0'), and 9, m (30') top. May use, m (0') No. 55 insert with or without sheaves. 9, m (30 ft) No. 55 or No. 55A boom top, m (0 ft) No. 79A fixed jib 7, m (90 ft) 9, m (30 ft) No. 79A jib top, m (0 ft) No. 79 jib insert, m (0 ft), m 0 ft) No. 79 jib butt No. 55 or No. 55A heavy-lift boom 97,5 m (30 ft), m (0 ft) No. 55 or No. 55A heavy-lift boom 0,0 m (00 ft) 9, m (30 ft) No. 55 boom top, m (0 ft), m (0 ft), m (0 ft), m (0 ft), m (0 ft), m (0 ft), m (0 ft), m (0 ft) 3,0 m (0 ft), m (0 ft) No. 55 or boom butt 3,0 m (0 ft), m (0 ft) No. 55 boom butt Model 000 No. 55 or No. 55A heavy-lift main boom 97,5 m (30 ft) Model 000 No. 79A fixed jib on No. 55 or No. 55A heavy-lift main boom,0 m (90 ft) Manitowoc 000 7

28 combinations No A boom combinations inserts length 3,0 m (0 ft) 55* 79 transition, m, m, m, m (0 ft) (0 ft) (0 ft) (0 ft), m (0 ft) 3, (0),7 (0), (0) 5,9 (0),0 7, (0) 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) 03, (30) 09,7 (30) 5, (30),9 (00) NOTE: 3, m (0') basic boom consists of, m (0') butt, 3,0 m (0') insert with drum,, m (0') insert,, m (0'), and 9, m (30') top. May use, m (0') No. 55 insert with or without sheaves. No A 9, m (30 ft) No. 79A boom top, m (0 ft) No. 79 boom insert, m (0 ft) No. 79 boom insert No A boom combinations inserts length 3,0 m (0 ft),0 7, (0) 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) 03, (30) 09,7 (30) 5, (30),9 (00) NOTE: 3, m (0') basic boom consists of, m (0') butt, 3,0 m (0') insert with drum,, m (0') insert,, m (0'), and 9, m (30') top. May use, m (0') No. 55 insert with or without sheaves. 55* 79 transition, m, m, m, m (0 ft) (0 ft) (0 ft) (0 ft), m (0 ft) No A 7, m (5 ft) Extended upper boom point 9, m (30 ft) No. 79A boom top, m (0 ft) No. 79 boom insert, m (0 ft) No. 79 boom insert, m (0 ft) No. 79 boom insert, m (0 ft) No. 79 boom insert No A heavy-lift boom,9 m (00 ft), m (0 ft) No. 79 boom insert, m (0 ft) No. 79 boom insert No A heavy-lift boom,9 m (00 ft), m (0 ft) No. 79 boom insert, m (0 ft) No. 79 boom insert, m (0 ft) No. 79 boom insert, m (0 ft) No. 79 boom insert, m (0 ft) No transition boom insert, m (0 ft) No transition boom insert, m (0 ft), m (0 ft), m (0 ft), m (0 ft) 3,0 m (0 ft), m (0 ft) No. 55 boom butt 3,0 m (0 ft), m (0 ft) No. 55 boom butt Model 000 No A heavy-lift main boom,9 m (00 ft) Model 000 No A heavy-lift main boom with 7, m (5 ft) extended upper boom point,9 m (00 ft)

29 combinations No. luffing jib combinations uffing jib length uffing jib inserts 3,0 m (0 ft), m (0 ft), m (0 ft) No. 79A luffing jib combinations uffing jib length uffing jib inserts, m, m (0 ft) (0 ft),3 (70) 7, (90) -, (0) 33,5 (0) 7, (90) 39, (30) 30,5 (00) 33,5 (0) 3, (0) 39, (30),7 (0) 9, m (30 ft) No. jib top, m (0 ft) No. jib insert 5,7 (50) 5, (70) 57,9 (90),0 (0) 70, (30) 3 3 9, m (30 ft) No. 79A jib top, m (0 ft) No. 79 jib insert 5,7 (50), (0) 5, (70) 5,9 (0) 57,9 (90),0,0 (0) 7, (0) 70, (30) 73, (0) No. luffing jib 73, m (0 ft), m (0 ft) No. jib butt, m (0 ft) No. jib insert, m (0 ft) No. jib insert, m (0 ft) No. jib insert 3,0 m (0 ft) No. jib insert 7, (50),3 (70),3 (90) 9,5 (30) No. 79A luffing jib 9,5 m (30 ft) 5 5, m (0 ft) No. 79 jib insert, m (0 ft) No. 79 jib insert, m (0 ft) No. 79 jib insert, m (0 ft) No. 79 jib insert No A heavy-lift boom 5,3 m (0 ft) 9, m (30 ft) No. 79A boom top, m (0 ft) No. 79 boom insert, m (0 ft) No. 79 boom insert, m (0 ft) No. 79 jib insert 3,0 m (0 ft) No. 79 jib insert, m (0 ft) No. 79A jib butt, m (0 ft) No 79 boom insert, m (0 ft) No boom insert No. 55 or No. 55A heavy-lift boom 5,9 m (0 ft) 9, m (30 ft) No. 55 boom top, m (0 ft), m (0 ft) No 55 boom insert, m (0 ft) No. 55 or No. 55A boom insert, m (0 ft), m (0 ft) No. 55 or No. 55A boom insert, m (0 ft) 3,0 m (0 ft) No. 55 or No. 55A boom insert, m (0 ft) No. 55 or No. 55A boom butt 3,0 m (0 ft) No. 55 Insert, m (0 ft) No. 55 boom butt Model 000 Model 000 No. luffing jib on No. 79A luffing jib on No. 55 No A heavy-lift main boom or No. 55A heavy-lift main boom 5,5 m (50 ft) 9,3 m (90 ft) Manitowoc 000 9

30 eavy-lift boom range diagram No. 55 or No. 55A main boom (30) 03, 3 ⁰ 0 ⁰ (30) 97,5 97, 5 (30) 70 ⁰ 9, 9, 0 ⁰ (0) 5,3 5,3 (0) (0) 79, 79, (0) 50 ⁰ eight above ground (0) 73, (0) 7,,0 (0) 5,9,0 5,9 ( 0) 73, (0) 7, (0) 0 ⁰ (0),, ( 0) 30 ⁰ (0),7,7 ( 0) (0) 3, 3, ( 0) (00) 30,5 0 ⁰ (0), (0),3 (0), 0, m (33' 5") TAISWING,5 m (5' 0") ROTATION, (0) 3, m ( ' 5" ),3 (0), (0) 30,5 (00) 3, (0),7 (0), (0) 5,9 (0) Distance from centerline of rotation,0 7, (0) 73, (0) 79, (0) 30

31 eavy-lift boom load charts iftcrane boom capacities No. 55 or No. 55A with 30,5 m (00 ft) mast No kg (5,000 lb) Counterweight 5 50 kg (30,000 lb) Carbody counterweight 30 Rating kg (lb) x 000 7,3 (),0 () 9,0 (30),0 (3),0 (0),0 (5),0 (50),0 (0),0 (70),0 (0),0 (90) 30,0 (00) 3,0 (0) 3,0 (0) 0,0 (30),0 (0) 50,0 (0) 3, (0) 00,0 (3.) 5, (5.7) 5, (995.9) 375,5 (30.) 33, (75.) 9,5 (57.7) 50,0 (53.),3 (7.) 7, (39.) 55, (33.3),0 (.3),0 (5.7) 9, (3.5),9 (7.),7 (0) 57,5 (99.) 373,9 (.) 3,3 (7.5) 90,3 (5.9), (50.) 7,0 (9.9) 7,3 (39.9) 5,3 (333.) 5,3 (.7) 3,3 (.) 9, (.0),3 (5.9) 73,3 (.) 7, (5.7), (0) (97.9) 37, (.5) 30, (73.),7 (5.5) 7, (577.0) 5,5 (.5) 9, (3.5) 5, (330.5), (.), (.) 93, (09.7) 5,3 (3.) 7,3 (.9), (3.) (.) 5,9 (0) 370,5 (.9) 33, (73.) 7,3 (.) 5, (573.),0 (3.3),3 (35.3) 5,3 (37.) 3, (79.9), (39.) 9, (07.0), (0.9) 7, (59.) 5, (0.9),3 (.7),0 370, (.7) 337,7 (73.),5 (.),9 (57.0),9 (.5) 7,5 (33.) 50, (35.9),7 (7.9) 0, (3.) 9,3 (05.) 3,5 (79.) 70,5 (57.9) 5,0 (39.) 7, (0.) 7, (0) 33, (7.) 5,0 (3.) 3,3 (5.5), (57.9) 5, (379.), (3.7),5 (7.) 09,3 (35.) 9,9 (0.), (7.5) 9, (5.) 3,5 (3.),3 (07.) 73, (0) (75.9) 3,9 (0.),3 (5.) 0,5 (55.5),7 (377.) 7,7 (39.) 0,7 (7.3) 0, (33.) 9, (00.9), (7.), (5.),7 (3.5) 5, (05.3) 79, (0),5 (3.7) 0, (5.) 0, (5.7) 3,0 (373.5) 5,9 (35.) 9, (70.) 07, (3.3) 7, (97.7) 79,7 (7.3),7 (9.5), (3.) 3,9 (0.) 5, (0), (33.7) 39, (559.) 07, (9.0),7 (3.7),7 (3.) 7,9 (7.) 0, (.), (95.5) 7,7 (9.0) 5, (7.) 0, (.7), (99.) 9, 3, (55.0) 05, (5.) 59,9 (3.),9 (30.), (3.7) 0,7 (.) 5, (9.) 77, (5.),0 (3.7) 5,5 (5.), (95.) 97,5 (30) 3,3 (5.) 0, (5.) 0,0 (3.9),9 (30.7), (3.7) 0,9 (5.3) 5,3 (9.) 77, (.), (.) 5,7 (5.),3 (9.) 5,0 (0),7 (9.), (.) 39, (.9) 3,9 (3.0) 37,3 (79.5) 3, (77.) 3, (73.5) 3,7 (73.) 0,0, 3, (7.3) 30,7 (5.) 9, (.9), (59.5), (55.9), (5.),0 (0),3 (50.),3 (.5), (3.) 9,0 (39.) 9,3 (0.) 7,0 (0) 5, (3.), (9.), (.9), (5.) 7,0 (50), (5.) 0, (3.0), (.) (9.5) 7,0 (55) (.9),7 (9.9) (5.) (.) Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes. Manitowoc 000 3

32 eavy-lift boom range diagram No A main boom (0),0 3 ⁰ 0 ⁰ (00),9 (30) 5,,9 (00) 5, (30) 70 ⁰ (30) 09,7 09,7 (30) 0 ⁰ (30) 03, 03, (30) (30) 97,5 97,5 (30) 50 ⁰ 9, 9, eight above ground (0) 5,3 (0) 79, (0) 73, (0) 7, 73, (0) 7, (0) 5,3 (0) 79, (0) 0 ⁰,0,0 (0) 5,9 5,9 ( 0) 30 ⁰ (0),, ( 0) (0),7,7 ( 0) (0) 3, 3, ( 0) 0 ⁰ (00) 30,5 (0), (0),3 (0), 0, m (33' 5") TAISWING,5 m (5' 0") ROTATION, (0) 3, m ( ' 5" ),3 (0), (0) 30,5 (00) 3, (0),7 (0), (0) 5,9 (0),0 Distance from centerline of rotation 7, (0) 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) 3

33 eavy-lift boom load charts iftcrane boom capacities No A with 30,5 m (00 ft) mast No kg (5,000 lb) Counterweight 5 50 kg (30,000 lb) Carbody counterweight 30 Rating kg (lb) x 000 3, (0),7 (0), (0),0 7, (0) 73, (0) 5,3 (0) 9, 97,5 (30) 09,7 (30) 5, (30),9 (00) 7,9 () 53,5 (000.0) 9, (30) 53,5 (000.0) 53,5 (000.0),0 (939.3) 0,0 (3) 9, (9.) 7,7 (.),0 (.),0 (0) 39,5 (75.5) 3, (755.7) 3, (75.0) 30,7 (750.0) 309, (3.) (33.7),0 (5) 97, (70.) 9, (7.9) 9, (.) 9, (3.5) 7, (7.5),0 (599.) 0,7 (.0),0 (50) 55, (595.) 5, (593.) 53, (590.5) 5, (59.) 5, (5.7) 35, (53.9) 0,9 (.) 9,0 (30.5) 77, (397.5),0 (0), (5.5) 3, (3.), (0.), (79.) 0, (77.), (0.5), (0.) 77,3 (33.) 7,3 (3.3) 35,3 (9.3) (57.) (0.) 0,0 (70) 99,0 (07.) 9,0 (05.) 9, (0.) 9, (0.3) 95,3 (399.) 9, (39.) 9,7 (35.) 59,9 (33.) 5,7 (3.) 33,7 (.),0 (5.) 99, (0.),0 (0),5 (39.7) 0, (37.7) 59,3 (3.) 5,7 (33.5) 57,9 (3.7) 57,5 (30.9) 3, (3.) 35, (93.) 7, (77.),7 (9.0) 09,5 (3.) 99,5 (9.3),0 (90),0 (99.) 5, (9.),7 (9.), (9.) 3, (95.0) 3, (9.7) 33,7 (0.9) 5, (3.7),7 (.9) 0,0 (.) 00,3 (09.) 95, (99.) 30,0 (00) 0,0 (5.9) 9,5 (57.), (55.),5 (55.7),0 (5.5) 7, (5.),5 (5.) 0,0 (39.) 03, (5.5) 9, (99.9), (.3), (7.) 3,0 (0) 9, (9.) 9,7 (99.9) 9,7 (97.9) 9, (97.) 9, (9.) 90,9 (95.9) 9, (93.5) 9,0 (90.7) 7, (9.) 7,7 (.5) 7,9 (55.9) 7, (.7),0 (0) 7, (0.0) 73, (5.) 73,3 (57.9) 7,7 (5.7) 7,5 (5.) 7, (53.7) 75,5 (5.) 70,0 (50.7) 5, (.9) 0,9 (3.) 57,0 (3.),0 (0) 59,9 (9.0) 59,9 (9.0) 59,3 (7.) 59, (7.3) 5,0 (.) 57, (.9) 5, (.7) 5,9 (.0) 5, (3.),9 (05.) 5,0 (0) 9,7 (0.9) 9, (05.7) 9,0 (05.3) 7, (0.) 7,0 (00.9), (99.7),7 (95.9) 3., (93.), (9.3) 0,0, (.3),0 (.0) 39, (5.5) 39,0 (3.) 3, (.) 3,7 (7.) 35, (7.5) 35, (7.9),0 (0) 3,5 (73.) 33, (7.) 3,5 (9.) 3,0 (.) 30,3 (.) 9,3 (.5), (0.9) 7,0 (0),0 (59.) 7, (5.0), (5.),9 (53.),0 (50.9) 3, (9.3) 7,0 (0) 3,5 (50.0),7 (.), (7.) 0, (3.3) 9,5 (.), (39.),0 (0), (39.),3 (3.7), (35.0) 5,7 (33.9),9 (3.),0,,0 (30.),3 (.) 3, (.), (.) 9,0 (30) 3,5 (.3),7 (.) 0,5 (0.0) 9,7 9,0 (30) 0,9 9,3 (.7), (.) 7, Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes. Manitowoc

34 Extended upper boom point range diagram No A main boom with 7, m (5 ft) extended upper boom point (0),0. ⁰ 0 ⁰ (00),9 (30) 5,,9 (00) 5, (30) 70 ⁰ (30) 09,7 09,7 (30) 0 ⁰ (30) 03, 03, (30) (30) 97,5 97,5 (30) 50 ⁰ 9, 9, eight above ground (0) 5,3 (0) 79, (0) 73, (0) 7, 73, (0) 7, (0) 5,3 (0) 79, (0) 0 ⁰,0,0 30 ⁰ (0) 5,9 (0), (0),7 (0) 3, 0 ⁰ (00) 30,5 (0), (0),3 (0), 0, m (33' 5") TAISWING,5 m (5' 0") ROTATION, (0) 3, m ( ' 5" ),3 (0), (0) 30,5 (00) 3, (0),7 (0), (0) 5,9 (0),0 Distance from centerline of rotation 7, (0) 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) 3