Liftcrane Boom Capacities 999 SERIES 2. Manitowoc Cranes, Inc.
|
|
|
- Helena Foster
- 5 years ago
- Views:
Transcription
1 Liftcrane Capacities No. 82 or 22EL LIFTING CAPACITIES: Lifting capacities for various boom lengths and operating radii are for freely suspended loads and do not exceed 75% of a static tipping load. Capacities based on structural competence are denoted by an asterisk (*). Capacities indicated by (b) require 12,500 Lb. minimum weight. Upper boom point capacity for liftcrane service with single part whip line is 29,500 Lbs. or 59,000 Lbs. with two part whip line. When boom butt mounted auxiliary drum is used, capacity with single part whip line is 20,000 Lbs. or 40,000 Lbs. with two part whip line. In all cases, upper boom point capacities cannot exceed those listed for main boom capacity. 250 Ft. thru 290 Ft. boom lengths require only the middle two sheaves in lower boom point. All other sheaves must be removed from lower boom point. Note: 22L boom top No or No required for capacities greater than or equal to 462,500 Lbs. Weight of jib, all load blocks, hooks, weight ball, slings, hoist lines, etc., beneath boom and jib point sheaves, is considered part of main boom load. is not to be lowered beyond radii where combined weights are greater than rated capacity. Where no capacity is shown, operation is not intended or approved. OPERATING CONDITIONS: Machine to operate in a level position on a firm uniformly supporting surface with gantry up. Refer to boom rigging No (No. 82) or No (No. 22EL) and Wire Rope Specification chart No A. Crane operator judgment must be used to allow for dynamic load effects of swinging, hoisting or lowering, travel, wind conditions, as well as adverse operating conditions and physical machine depreciation. Refer to operators manual for operating guidelines. MACHINE TRAVEL: Machine to travel on a firm, level and uniformly supporting surface and boom within boom angle range shown in capacity chart. Refer to Maximum Allowable Travel Specification chart No A. OPERATING RADIUS: Operating radius is horizontal distance from axis of rotation to center of vertical hoist line or load block. angle is angle between horizontal and centerline of boom butt and inserts, and is an indication of operating radius. In all cases, operating radius shall govern capacity. BOOM POINT ELEVATION: point elevation is vertical distance from ground level to centerline of boom point shaft. MACHINE EQUIPMENT: Machine equipped with 28 Ft. 2 in. crawlers, 48 in. treads, 10 Ft. 3 in. retractable gantry, 30 Ft. live mast, 20 part boom hoist reeving, boom support straps or four 1-3/8 in. boom pendants, 184,600 Lb. crane counterweight and two 22,000 Lb. carbody counterweights. Deduct From Capacities When Jib Is Attached Jib Length Jib No Ft. 2,700 Lbs. 40 Ft. 3,500 Lbs. 50 Ft. 4,300 Lbs. 60 Ft. 5,100 Lbs. 70 Ft. 6,100 Lbs. 80 Ft. 7,100 Lbs. 8 Side Boxes - 1 Center Box Page 1 of 8
2 Liftcrane Capacities No. 82 or 22EL Maximum and Jib Lengths Lifted Unassisted Over End of Blocked Crawlers Over Side of Crawlers Length Jib No. 134 Length Jib No. 134 (a) 290 Ft. (a) 260 Ft. 280 Ft. 250 Ft. 270 Ft. 240 Ft. 260 Ft. 50 Ft. 230 Ft. 50 Ft. 250 Ft. 80 Ft. 220 Ft. 80 Ft. Load block, hook and weight ball on ground at start. (a) Upper boom point cannot be used on 290 Ft. boom or over side of crawlers on 260 Ft. boom. Consult jib chart for jib capacities. Upper boom point cannot be used when jib is attached. 70 Ft. BOOM ,100 *b ¹ ,600 *b ,600 *b ,900 *b ,000 *b ,000 *b ,100 *b ,100 * , , , , , , , , , , , , , , , ,900 ¹ See note on page Ft. BOOM ,900 *b ,000 *b ,200 *b ,400 *b ,400 *b ,400 *b ,500 * , , , , , , , , , , , , , , , , , , Ft. BOOM ,800 *b ,900 *b ,900 *b ,000 *b ,100 * ,400 * , , , , , , , , , , , , , , , , , , ,800 Page 2 of 8
3 Liftcrane Capacities No. 82 or 22EL 100 Ft. BOOM ,700 *b ,700 *b ,800 *b ,900 * ,200 * , , , , , , , , , , , , , , , , , , , , , Ft. BOOM ,100 * ,300 * ,300 * ,600 * , , , , , , , , , , , , , Ft. BOOM , , , , , , , , , , Ft. BOOM ,500 * ,900 * ,000 * ,300 * , , , , , , , , , , , , , , , , , , , , , , , , , Ft. BOOM ,000 * ,700 * ,000 * , , , , , , , Ft. BOOM , , , , , , , , , , , , , , , , , , , , Ft. BOOM ,400 * ,600 * , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,600 Page 3 of 8
4 Liftcrane Capacities No. 82 or 22EL 150 Ft. BOOM ,500 * ,400 * , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Ft. BOOM ,000 * ,000 * , , , , , , , , , , , , , , , Ft. BOOM , , , , , , , , , , , , , , , , , Ft. BOOM ,700 * ,400 * , , , , , , , , , , , , , , , , , , , , , , , Ft. BOOM , , , , , , , , , , Ft. BOOM ,500 * ,500 * , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,500 Page 4 of 8
5 Liftcrane Capacities No. 82 or 22EL 190 Ft. BOOM ,800 * ,600 * , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Ft. BOOM ,000 * ,000 * ,000 * , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Ft. BOOM ,300 * ,200 * ,900 * , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,300 Page 5 of 8
6 Liftcrane Capacities No. 82 or 22EL 220 Ft. BOOM ,100 * ,700 * ,300 * ,800 * , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,500 * 230 Ft. BOOM ,300 * ,800 * ,400 * ,000 * , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Ft. BOOM ,300 * ,900 * ,500 * ,100 * ,600 * , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,000 Page 6 of 8
7 Liftcrane Capacities No. 82 or 22EL 250 Ft. BOOM ,500 * ,100 * ,800 * ,400 * ,000 * ,600 * ,200 * , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Ft. BOOM ,300 * ,900 * ,600 * ,200 * ,800 * ,400 * , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Ft. BOOM ,100 * ,800 * ,400 * ,100 * ,700 * ,300 * ,400 * , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,100 Page 7 of 8
8 Liftcrane Capacities No. 82 or 22EL 280 Ft. BOOM ,800 * ,500 * ,200 * ,800 * ,500 * ,600 * ,700 * , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Ft. BOOM ,200 * ,900 * ,600 * ,200 * ,400 * ,500 * ,600 * , , , , , , , , , , , , , , , , , , , , , , , , , , , ,600 Page 8 of 8
Liftcrane Boom Capacities 2250 SERIES 3
Liftcrane Capacities 2250 SERIES 3 No. 44 With Long Reach Top LIFTING CAPACITIES: Lifting capacities for various boom lengths and operating radii are for freely suspended loads and do not exceed 75% of
Liftcrane Boom Capacities Boom No. 58 HL 332,000 lb Crane Counterweight 120,000 lb Carbody Counterweight 360 Degree Rating SERIES 3
ANSI B30.5 Liftcrane Boom Capacities Boom No. 332,000 lb Crane Counterweight 120,000 lb Carbody Counterweight 360 Degree Rating 16000 SERIES 3 LIFTING CAPACITIES: Lifting capacities for various boom lengths
4600 SERIES 3 RINGER SERIES 2. Manitowoc Cranes, Inc. Manitowoc, Wisconsin U.S.A.
Liftcrane Capacities No. 35 thru 1 Degree Static Machine LIFTING CAPACITIES: Lifting capacities are for a RINGER when operating on a barge. Machine shall be positively secured to prevent shifting. Lifting
MANITOWOC (Crawler Mount) LOAD CHART
For Use in CCO Written Examinations MANITOWOC (Crawler Mount) LOAD CHART LATTICE BOOM CRAWLER CRANE (LBC) These charts have been adapted from the original manufacturer s charts for use in CCO Written Examinations.
230 Ton (209-mton) liftcrane 32,000 lb. (14,515 Kg) Clamshell 20,000 lb. (9,072 Kg) Dragline
3 Ton (9-mton) liftcrane 3, lb. (4,55 Kg) Clamshell, lb. (9,7 Kg) Dragline 888 OUTLINE DIMENSIONS 43'7/t' (3.3 m) - 9'4 /t' (8.95 m) Tailswing-++.j t---9'/t' (8.9 m) --r-+--j--h--- 35'9/t' (.9 m) ------
MODEL CKE2500-II TON CAPACITY
LIFTING CHARTS - Crawler Cranes KOBELCO MODEL - 275 TON CAPACITY Luffing Jib Working Ranges Boom Angle: 88 125 54.9 m 51.8 m 48.8 m 45.7 m 42.7 m 39.6 m 3 m 33.5 m 30.5 m 57.9 m 120 115 110 105 100 95
LINK-BELT MODEL 238H5-150 TON CAPACITY
TRANSPORTATION SPECS - Crawler Cranes INK-BET MODE 2385-150 TON CAPACITY COMPONENT EIGTS BS. KGS. Boom 70 (1.78m) x 62 (1.57m) Min 50 to Max 260 Complete Crane c/w 50 boom 287,717 130 508 OD (tubular)
LOAD CHART & RIGGING PRACTICE EXERCISES
LOAD CHART & RIGGING PRACTICE EXERCISES HYDRAULIC LATTICE CRANE Crawler Crane Kobelco CK1600-II 160 Ton CraneSafe Certification Document #: Lattice Hydraulic Crane Practice LCR.LHC.KB1600.160.P1(131009)
LIFTING CHARTS - Crawler Cranes AMERICAN MODEL TON CAPACITY
LIFTING CHARTS - Crawler Cranes AMERICAN MODEL 9310-225 TON CAPACITY 9310 1 LIFT RATINGS With Tubular and "S-S" Counterweight (135,000 Lbs.) 17 81.4-450,000 76 12 20 78.9-336,000 75 9 25 74.7 195,030 230,290
Working Weights. Assembly Diagram. Ctwt ABC+A
14 5487--- 0607--- P3 Assembly Diagram Link--Belt Working Weights Ctwt AB+A Ctwt ABC+A Ctwt ABCDE + A lb (kg) lb (kg) lb (kg) 315,532 (143 125) 340,377 (154 395) 390,069 (176 935) psi 9.8 10.6 12.2 kg/cm2
Load Rating Charts C-Series Cranes 3001
Load Rating Charts C-Series Cranes 3001 7600016-001 July 2003 Capacities: Capacities Overloading this crane or failing to comply with operating conditions and restrictions given on Capacity Chart can
LS 278H. 250 ton (227 metric ton) Hydraulic Lattice Boom Crawler Crane. Tube Boom Capacities ft. ( m)
Hydraulic Lattice Crawler Crane Tube Capacities 60 330 ft. (18.29 100.58 m) 250 ton (227 metric ton) 35 ft. (10.67 m) Live Mast Capacities On Outrigger Jacks On Side Frames 10 ft. (3.05 m) Extension Lifting
LIFTING CHARTS - Crawler Cranes AMERICAN MODEL TON CAPACITY
LIFTING CHARTS - Crawler Cranes AMERICAN MODEL 7250-60 TON CAPACITY 7250 1 LIFT RATINGS With Tubular Hammerhead and "K-F-L-M" Counterweight (34,000 Lbs.) 11 82.8-120000 46 6 12 81.3-120000 46 6 15 77.0-106950
40' ' POWERED BOOM: MODE 1 40' - 126' POWERED BOOM: MODE 2
Range Diagram and Lifting Capacity Cranes 100 TON LIFTING CAPACITY 40' - 97.3' POWERED BOOM: MODE 1 40' - 126' POWERED BOOM: MODE 2 CRANE WORKING CONDITIONS DIMENSIONS ARE FOR LARGEST FACTORY FUR- NISHED
model PROVISIONAL product guide features contents 200 mton (220 ton) capacity 865 m-ton (6,267 ft-kips) Maximum Load Moment
features 200 mton (220 ton) capacity 865 m-ton (6,267 ft-kips) Maximum Load Moment 89 m (292') Heavy-Lift Boom 98,4 m (323') Fixed Jib on Heavy-Lift Boom 113,8 m (373') Luffing Jib on Heavy-Lift Boom 253
HC 275 CAL CRANE & EQUIPMENT. Tel: 1 (844) Fax: 1 (510)
CAL CRANE & EQUIPMENT Tel: 1 (844) 882-2415 Fax: 1 (510) 639-53 crane-sales@calcrane.com www.calcrane.com Demag 275 tons (249.5 m) maximum lift capacity Power up/down and freefall on main and auxiliary
Series 1400A Hydraulic Crane 33 Ton
Series 1A Hydraulic Crane 33 Ton Load Ratings DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
Series 1400 Hydraulic Crane 33 Ton Load Ratings
Series 1 Hydraulic Crane 33 Ton Load Ratings! DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
truck crane 140 tons link-belt htc-3140lb BOOM LENGTHS: 42 to 195 ft JIB LENGTHS: 38 to 109 ft JIB OFFSETS:
truck crane 140 tons link-belt htc-3140lb BOOM LENGTHS: 42 to 195 ft JIB LENGTHS: 38 to 109 ft JIB OFFSETS: 2-15 - 30-45 NOTES: Technical Data Specifications & Capacities Telescopic Boom Truck Crane 140
AMERICAN MODEL 5299A - 60 TON CAPACITY
LIFTING CHARTS - Crawler Cranes AMERICAN MODEL 5299A - 60 TON CAPACITY (POUNDS') FROM POINT 40' 11 80.5 120,000 * 45 ( 12.2 M) 12 79.0 110,020 * 44 15 74.6 81,530 44 20 66.9 52,290 42 25 58.8 38,280 39
Series 1300A Hydraulic Crane 30 Ton Load Ratings
Series 13A Hydraulic Crane 3 Ton Load Ratings DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
LINK-BELT MODEL HTC-8675LB - 75 TON CAPACITY 48 7" (.80m) 41 0" /8" (3.52m) /16" (2.02m) /4" (.34m) 25" 11 0" (.
LIFTING CHARTS - Hydraulic Truck Cranes LINK-BELT MODEL - 75 TON CAPACITY 41 0" (12.50m) 48 7" (14.80m) C L Of Rotation 13 8 1/8" (4.17m) 7 0" (2.13m) 4 5/8" (118mm) 11 6 7/8" (3.52m) 6 7 11/16" (2.02m)
Load Chart Exercise Workbook
Load Chart Exercise Workbook (508) 212-4735 Copy Right 2017 For Exam Use Only BRODERSON IC-80-2D RATED LIFTING CAPACITIES IN POUNDS LOAD RADIUS IN FEET 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 ON RUBBER
Cranes. Range Diagram and Lifting Capacity RT TON LIFTING CAPACITY RANGE DIAGRAM 40' - 126'
Range Diagram and Lifting Capacity Cranes 80 TON LIFTING CAPACITY RANGE DIAGRAM 40' - 126' BOOM Dimensions are for largest factory furnished hook block and hook & ball, with anti-two block activated COUNTER
Series 1300 Hydraulic Crane 30 Ton Load Ratings
Series 13 Hydraulic Crane Ton Load Ratings! DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
Lifting Capacities Telescopic Boom All Terrain Crane ATC ton (118 metric ton) Link Belt
Lifting Capacities Telescopic Boom All Terrain Crane ATC 3130 130 ton (118 metric ton) Boom and fly capacities for this machine are listed by the following sections: Fully Extended Outriggers Working Range
LOAD CHART. MANTIS Model 10010MX. 50 Ton Hydraulic Crawler Crane as originally manufactured and equipped by Tadano Mantis Corporation.
MANTIS Model 10010MX 111.5 ft STANDARD BOOM LOAD CHART MANTIS Model 10010MX 50 Ton Hydraulic Crawler Crane as originally manufactured and equipped by Tadano Mantis Corporation. with Standard 111.5 ft Main
HYDRAULIC CRAWLER CRANE CK2500
HYDRAULIC CRAWLER CRANE CK2500 WITH OPTIONAL JIB Max. Lifting Capacity: 250 US Tons Max. Boom Length: 300 ft Max. Boom + Jib Length: 250 ft + 100 ft SPECIFICATIONS FOR CK2500 CRAWLER CRANE The Kobelco
Technical data Hydraulic lift crane LR 1160
Technical data Hydraulic lift crane LR 1160 Dimensions Basic machine with undercarriage R 7700 9700 5120 3500 3000 2200 1620 3770 1500 7200 3625 1000 4800 575 8460 1610 6800 6800 1475 R 5900 15175 6600
Technical data Hydraulic lift crane LR 1160
Technical data Hydraulic lift crane LR 1160 Dimensions Basic machine with undercarriage R 7700 9700 5120 3500 3000 2200 1620 3770 1500 7200 3625 1000 4800 575 8460 1610 6800 6800 1475 R 5900 15175 6600
CRANE RATING MANUAL HTC
SERIAL NUMBER: XXXX- XXXX CRANE RATING MANUAL HTC- 8611 TELESCOPIC BOOM TRUCK CRANE - 164.1 SIX SECTION LATCHING BOOM For Replacement, Order Part Number: T2P38 (116) R Link-Belt is a registered trademark.
Cranes. Range Diagram and Lifting Capacity RT TON LIFTING CAPACITY RANGE DIAGRAM 33' - 110' BOOM
Range Diagram and Lifting Capacity Cranes 55 TON LIFTING CAPACITY RANGE DIAGRAM 33' - 110' BOOM Dimensions are for largest factory furnished hook block and hook & ball, with anti-two block activated COUNTER
American hc230 Crawler Crane 230 ton Lifting Capacity. American hc230 HYDRAULIC CRAWLER CRANE
American hc230 Crawler Crane 230 ton Lifting Capacity American hc230 HIGHLIGHTS HIGHLIGHTS 230 tons (208.7 mt) maximum lifting capacity Increased capacity at working radii with optional CTWT Plus package
HC 110 Hydraulic Crawler Crane 110 t Lifting Capacity HC 110 HYDRAULIC CRAWLER CRANE
HC Hydraulic Crawler Crane t Lifting Capacity HC HYDRAULIC CRAWLER CRANE tons ( mt) maximum lifting capacity 2 ft ( m) maximum length of main boom 200 ft + ft (61 m + 21 m) maximum boom and jib HC HIGHLIGHTS
Ground bearing pressure 1.14 kg/cm 2. Main boom (No xx) max. length High reach (1311.xx and 1008.xx) 83 m Luffing jib (No xx) max.
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 14 m main boom, consisting of A frame, boom foot (5.5 m), boom head (8.5 m), 32.3 t basic counterweight, 15 t carbody
HC USt capacity Hydraulic crawler crane Datasheet imperial HC 110
HC USt capacity Hydraulic crawler crane Datasheet imperial HC CONTENTS HC Page: Key........................................................................................... 3 Highlights.....................................................................................
LS 278H. 250 ton (227 metric ton) Hydraulic Lattice Boom Crawler Crane. Tube Boom + Jib Capacities
Hydraulic Lattice Boom Crawler Crane LS 278H 250 ton (227 metric ton) Tube Boom + Capacities 60 300 ft. (18.29 91.44 m) Tube Boom with 30 100 ft. (9.14 30.48 m) of 30 ft. (9.14 m) Open Throat Top Section
T 775. truck crane 75 ton capacity. range diagram & lifting capacities. Range Diagram (40' - 126' boom)
T 7 truck crane ton capacity range diagram & lifting capacities DEFLECTIONS NOT SHOWN 6' - 9" 4' - 8" DIMENSIONS ARE FOR LARGEST FACTORY FURNISHED HOOK BLOCK AND HOOK & BALL, WITH ANTI-TWO BLOCK ACTIVATED
MANTIS 6010 LOAD CHART 80'-0 STANDARD BOOM LOAD CHART. MANTIS Model 6010
LOAD CHART Limitations and General Conditions. This MANTIS CRANE as manufactured by Tadano Mantis Corporation meets the requirements of ASME B30.5. Structure and stability have been tested in accordance
HC-278H II. HYLAB Series. Lattice Boom Truck Crane 300-ton (272 mt)
HC-278H II HYLAB Series Lattice Truck Crane 300-ton (272 mt) 300 tons (272 mt) at a 10' (3.05 m) radius 60' to 330' (18.29-100.58 m) of tube boom 300' + 100' (91.4 + 30.5 m) boom plus jib combination 403.8'
5. For max. wind speed please refer to lift chart in operator s cab or manual.
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn including wire ropes (260 m and 495 m) and 20 m main boom, consisting of A frame, boom foot (10 m), boom head (7 m),
LS 138H II. 80 ton (72.57 metric ton) Lattice Boom Crawler Crane. Tube Boom Capacities ( m)
Lattice Crawler Crane 8 ton (72.57 metric ton) Tube Capacities 4 2 (12.19 6.96 m) 24 (7.31 m) Live Mast / 2 (6.1 m) Base Section / 5 (1.52m) Tip Extension Duty Cycle Capacities 4 7 (12.19 21.34 m) Tube
For sales use only CRANE RATING MANUAL. RTC-8090 Series II 5 - Section Boom. Not for crane operations SERIAL NUMBER: XXXX-XXXX
SERIAL NUMBER: XXXX-XXXX CRANE RATING MANUAL RTC-8090 Series II 5 - Section Boom For Replacement, Order Part Number: N4P0090 (110509) R Link-Belt is a registered trademark. 1of96 N4P0091 Table Of Contents
Range Diagram and Lifting Capacity T Cranes RANGE DIAGRAM BOOM
Range Diagram and Lifting Capacity T340-1 Cranes RANGE DIAGRAM 30-94 BOOM Dimensions are for largest factory furnished hook block and hook & ball, with anti-two block activated COUNTER WEIGHT BOOM LENGTH
HYDRAULIC CRAWLER CRANE
HYDRAULIC CRAWLER CRANE consolidatedcrane.com Houston, TX 713.641.3330 Max. Lift Capacity: 500,000 lbs Max. Length: 300 ft Max. + Jib Length: 250 ft + 100 ft SPECIFICATIONS FOR CK2500-II CRAWLER CRANE
CRANE RATING MANUAL HTC
SERIAL NUMBER: CRANE RATING MANUAL 5---Section Boom For Replacement, Order Part Number: N3P0199 (031907) R Link-Belt is a registered trademark. 1of244 N3P0200 Table Of Contents Page Contents 3---4 Operating
LIFTING CHARTS - Crawler Cranes AMERICAN MODEL TON CAPACITY
LIFTING CHARTS - Crawler Cranes AMERICAN MODEL 7260-100 TON CAPACITY 7260 1 LIFT RATINGS with Tubular Chord Hammerhead and "S-S" Counterweight (49,700 lbs.) (15,150 kg.) () From 11 82.8 200000 46 8 12
HC 80. Hydraulic Crawler Crane. simple, available and cost effective FEATURES
HC 80 Hydraulic Crawler Crane FEATURES 80 tons (73 mt) max lift capacity 200 ft. (61 m) max lift crane boom length 170+60 ft. (52+18 m) max lift crane boom & jib length 240 ft. (73 m) max boom & luffing
Range Diagram and Lifting Capacity RT230. Cranes 30 TON LIFTING CAPACITY RANGE DIAGRAM 30' - 94' BOOM REDUCTION IN MAIN BOOM CAPACITY
Range Diagram and Lifting Capacity Cranes 30 TON LIFTING CAPACITY RANGE DIAGRAM 30' - 94' BOOM Dimensions are for largest factory furnished hook block and hook & ball, with anti-two block activated COUNTER
Hydraulic Crawler Crane
Hydraulic Crawler Crane Model : CKE1350G-2 Max. Lifting Capacity : 150 t x 4.4 m * Max. Lifting Capacity With Luffing Jib: 36.0 t x 12.0 m Max. Crane oom Length : 76.2 m Max. Luffing oom Length: 47.9 m
Technical data Hydraulic lift crane LR 1300 W
Technical data Hydraulic lift crane LR 1300 W Dimensions Basic machine with undercarriage 6390 3000 10570 1475 1760 20 5160 3820 8520 9675 520 4260 1700 1200 00 20 7100 520 00 9 R6 8560 20365 Operating
Technical data Hydraulic crawler crane HS 895 HD
Technical data Hydraulic crawler crane HS 895 HD Dimensions Basic machine with undercarriage R 9760 3650 10000 5480 3675 2445 1810 3950 1610 1700 7945 9360 3975 1720 R 6360 1100 6800 620 17380 Operating
2. Crane standing on firm, horizontal ground. 6. Working radii are measured from centre of swing and under load.
The operating weight includes the basic machine with crawlers, 2 main winches 26,500 lbs including wire ropes (853 ft and 1624 ft) and 66 ft main boom, consisting of A frame, boom foot (33 ft), boom head
Working Range Diagram
LIFTING CHARTS - Hydraulic Truck Cranes LINK-BELT MODEL - 75 TON CAPACITY Working Range Diagram Working Range Diagram 40 20 2 190 180 61 Fly + 115 170 160 10 8.5 61 Fly + 95 36.5 Fly + 115 150 140 36.5
data model 2250 product guide contents features 272 mton (300 ton) capacity mton-m (12,294 ft-kips) Maximum Load Moment
data features 272 mton (300 ton) capacity 700 mton-m (2,29 ft-kips) Maximum oad Moment 9, m (300') eavy-ift 00,6 m (330') ong-reach 2,8 m (370') Fixed Jib on eavy-ift 8,9 m (390') Fixed Jib on ong-reach
Hydraulic Crawler Crane
Hydraulic Crawler Crane Model : BMS1000 Max. Lifting Capacity: 100 t x 3.8 m Max. Crane Boom Length: 62.6 m BMS1000 CONTENTS 3 SPECIFICATIONS 5 6 8 9 10 11 12 13 14 1 GENERAL DIMENSIONS BOOM AND JIB ARRANGEMENTS
Range Diagram and Lifting Capacity RT665. Cranes 65 TON LIFTING CAPACITY RANGE DIAGRAM 36' - 111' BOOM REDUCTION IN MAIN BOOM CAPACITY
Range Diagram and Lifting Capacity Cranes 65 TON LIFTING CAPACITY RANGE DIAGRAM 36' - 111' BOOM DIMENSIONS ARE FOR LARGEST FACTORY FURNISHED HOOK BLOCK AND HOOK & BALL, WITH ANTI-TWO BLOCK ACTIVATED COUNTER
6. Working radii are measured from centre of swing and under load.
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 20 m main boom, consisting of A frame, boom foot (7 m), boom head (7 m), boom extension (6 m), 60.6 t basic counterweight,
LIFTING CHARTS - Conventional Truck Cranes AMERICAN MODEL TON CAPACITY
LIFTING CHARTS - Conventional Truck Cranes AMERICAN MODEL - 125 TON CAPACITY 1 LIFT RATINGS With Tubular Hammerhead and "K-F-L-M" Counterweight (34,000 lbs.) Min 11 82.8-91090 250000 250000 47 10 12 81.3-87730
LOAD CHARTS MANTIS 6010LP 30 TON TELE-BOOM CRAWLER CRANE 1 V FT MAIN BOOM, 20 FT EXTENSION & 20 FT JIB
0 FT MAIN BOOM, FT EXTENSION & FT JIB in in in in 1 LIFTING CAPACITIES IN THOUSANDS OF POUNDS; 3, % OF TIPPING, FIRM & LEVEL GROUND MAIN BOOM with TRACKS FULLY EXTENDED 11,0 lb COUNTERWEIGHT ZERO COUNTERWEIGHT
Range Diagram and Lifting Capacity T Cranes. View thousands of Crane Specifications on FreeCraneSpecs.com RANGE DIAGRAM BOOM
Range Diagram and Lifting Capacity Cranes RANGE DIAGRAM 30-94 BOOM Dimensions are for largest factory furnished hook block and hook & ball, with anti-two block activated COUNTER WEIGHT BOOM LENGTH UPPERSTRUCTURE
Ground bearing pressure 1.08 kg/cm 2. Main boom (No xx) max. length High reach (No xx and 1309.xx)
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 17 m main boom, consisting of A frame, boom foot (7 m), boom head (10 m), 50.9 t basic counterweight, 20 t carbody
2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with crawlers, 2 main winches 26,500 lbs and 46 ft main boom, consisting of A frame, boom foot (18 ft), boom head (28 ft), 71,200 lbs basic counterweight,
View thousands of Crane Specifications on FreeCraneSpecs.com. Technical data Hydraulic lift crane LR 1250
Technical data Hydraulic lift crane LR 1250 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 1345 4600 1500 7520 8700 3740 1830 1200 7000 520 R 6200 19200 7600 1200 5800
MANTIS 200RS LOAD CHART 54'-0 STANDARD BOOM LOAD CHART. MANTIS Model 200RS
LOAD CHART Limitations and General Conditions. This MANTIS CRANE as manufactured by SpanDeck, Inc., meets the requirements of ANSI B30.5 (2000), (When specifically equipped). Structure and stability have
RT555 TEREX. rough terrain crane 55 ton capacity. range diagram & lifting capacities. Range Diagram ( boom) HOOK BLOCK WEIGHTS
TEREX RT5 rough terrain crane ton capacity range diagram & lifting capacities DIMENSIONS ARE FOR LARGEST FACTORY FURNISHED HOOK BLOCK AND HOOK & BALL, WITH ANTI-TWO BLOCK ACTIVATED Range Diagram (33-1
Load capacity charts
charts HS 855 HD These calculations meet the requirements of ANSI B30.5 (incl. SAE J987 and SAE J765). The machine classification for lifting operations acc. ISO 4301/1 and /2 given by the manufacturer
Technical Data. Specifications & Capacities. HSL Crawler Crane. View thousands of Crane Specifications on FreeCraneSpecs.com
1 Technical Data Specifications & Capacities HSL Crawler Crane Ton (72.6 metric ton) CAUTION: This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's
MODEL : TM-1882 CRANE SPECIFICATIONS. MAXIMUM LIFTING CAPACITY lines)
DATE February, 2010 MODEL : TM-1882 CRANE SPECIFICATIONS MAXIMUM LIFTING CAPACITY 17,000kg@1.5m(6-part lines) BOOM WINCH SWING 6-sectioned, fully powered partly synchronized telescoping boom of pentagonal
HC 80 Hydraulic Crawler Crane 80 t Lifting Capacity HYDRAULIC CRAWLER CRANE
HC Hydraulic Crawler Crane t Lifting Capacity HC HYDRAULIC CRAWLER CRANE 410 Stevenson Dr, Bolingbrook, IL 4 6-972-9199 16675 Van Dam Rd, South Holland IL 473 219-972-9199 www.stevensoncrane.com (73 mt)
DEMAG MODEL AC TON CAPACITY
LIFTING CHARTS - All Terrain Cranes DEMAG MODEL - 100 TON CAPACITY Working Range Main Boom 1 Liing capacities main boom in 39,700 lb 25' 3'' x 23' 360 85% Main Boom () 0 over rear 35.8 52.8 70.2 70.5 82.0
RTC 8050 Series II. 50 ton (45.36 metric tons) Telescopic Boom Rough Terrain Crane
Telescopic Boom Rough Terrain Crane RTC 85 Series II 5 ton (45.36 metric tons) Boom and Fly Capacities for this machine are listed by the following sections. Working Range Diagram 35.5 to 6.3 (1.82 18.38
LINK-BELT MODEL 218HSL TON CAPACITY
TRANSPORTATION SPECS - Crawler Cranes INK-BET MODE 218S - 110 TON CAPACITY COMPONENT EIGTS BS. KGS. Complete Crane c/w 40, full Cwt and Block 190,058 86,210 BOOM 60 (1.52m) X 50 (1.72m) Min 40 to Max 230
Manitowoc Product Guide. Features. View thousands of Crane Specifications on FreeCraneSpecs.com
Manitowoc 000 Product Guide Features 750 t (5 USt) capacity No. 55A boom with MAX-ER 00 t (0 USt) capacity No. 55 boom 9 09 mton-m (5,505 ft-kips) maximum load moment with MAX-ER 97,5 m (30 ft) No. 55
Hydraulic Crawler Crane
Hydraulic Crawler Crane Model : BME800G-2 Max. Lifting Capacity : 80 t x 3.6 m Max. Crane Boom Length : 54.9 m BME800G-2 CONTENTS 3 SPECIFICATIONS 5 6 7 8 9 10 11 12 13 14 17 GENERAL DIMENSIONS BOOM AND
Crawler Crane LR
Crawler Crane LR 1130 EN LR 1002.03 Dimensions Basic machine with undercarriage R 6530 2970 85 6050 3040 1954 1530 3640 1250 6750 7970 3355 1360 1000 6350 440 1345 R 5700 13930 5310 Operating weight The
LINK-BELT MODEL HTC TON CAPACITY RANGE DIAGRAM. LIFTING CHARTS - Hydraulic Truck Cranes
LIFTING CHARTS - Hydraulic Truck Cranes LINK-BELT MODEL HTC-840-40 TON CAPACITY RANGE DIAGRAM NOTE: and fly and jib geometry shown are for unloaded condition and machine standing level on firm supporting
Hydraulic Crawler Crane
Hydraulic Crawler Crane Model : CKE800G Max. Lifting Capacity : 80 t x 3.0 m Max. Crane Boom Length : 54.9 m Max. Fixed Jib Combination: 42.7 m + 18.3 m 45.7 m + 12.2 m CKE800G CONENS 3 5 6 7 10 11 14
HC 50. Hydraulic Crawler Crane. simple, available and cost effective FEATURES
HC 50 Hydraulic Crawler Crane FEATURES 50 tons (45.4 mt) max lift capacity 160 ft. (48.8 m) max lift crane boom length 130+40 ft. (39.6+12.2 m) max lift crane boom & jib length Power up/down and freefall
LOAD CHARTS TMS9000E 85% STABILITY SERIAL NUMBER
LOAD CHARTS TMS9000E 85% STABILITY SERIAL NUMBER TMS9000E - S/N 1 TMS9000E - S/N 2 CONTENTS GENERAL NOTES...11 WEIGHT REDUCTIONS AND WARNING NOTES... 12 COUNTERWEIGHT CONFIGURATIONS... 13-15 LIFTING AREA
Cranes. Range Diagram and Lifting Capacity RT345-1XL 45 TON LIFTING CAPACITY RANGE DIAGRAM 33.75' - 105' BOOM
Range Diagram and Lifting Capacity RT345-1XL Cranes 45 TON LIFTING CAPACITY RANGE DIAGRAM 33.75' - 105' BOOM DIMENSIONS ARE FOR LARGEST FACTORY FURNISHED HOOK BLOCK AND HOOK & BALL, WITH ANTI-TWO BLOCK
Index Performance Data Working Weights Assembly Manitowoc Crane CARE SM
Index Specifications Outline Dimensions and Weights Wire Rope engths Wire Rope Specifications Combinations Range Diagram and Capacity Charts 3-7 3 3 3 3 5 7-3 9-9 9-0 -5 5-57 5 - -3 - -7-9 3 5-7 30-3 33-3
Heavy Equipment & Rigging Specialist Training
Heavy Equipment & Rigging Specialist Training Module 3 Unit 1: Crane Load Chart Basics 23Mar08 1 Unit Objective After completion of this unit, you will be able to deploy a mobile crane safely and efficiently
Cranes. OSHA Office of Training & Education 1
Cranes OSHA Office of Training & Education 1 Major Causes of Crane Accidents Contact with power lines Overturns Falls Mechanical failures OSHA Office of Training & Education 2 How Do Accidents Occur? Instability
HYDRAULIC CRAWLER CRANE
HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 250 t x 4.6 m Max. Crane oom Length: 76.2 m Max. Long oom Length: 9.4 m Max. Fixed Jib Combination: 76.2 + 30.5m Max. ower Jib Combination: 64. + 5.8 m CONFIGURAION
Hydraulic Crawler Crane
Hydraulic Crawler Crane Model : CKE1100G Max. Lifting Capacity : 110 t x 3.6 m * Max. Crane Length : 70.1 m Max. Fixed Jib Combination: 61.0 m + 21.3 m * Auxiliary sheave is necessary. CKE1100G CONENS
Crawler Crane LR 1200 LR
Crawler Crane LR 1200 EN LR 1004.02 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 4600 1500 7520 8700 3740 1830 1200 7000 520 1345 R 6200 19200 7600 1200 5800 narrow
HC 60. Hydraulic Crawler Crane. simple, available and cost effective FEATURES
HC 60 Hydraulic Crawler Crane FEATURES 60 tons (54.4 mt) max lift capacity 160 ft. (48.8 m) max lift crane boom length 130+40 ft. (39.6+12.2 m) max lift crane boom & jib length Power up/down and freefall
Crawler Crane LR 1250 LR
Crawler Crane LR 1250 EN LR 1004.02 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 1345 4600 1500 7520 8700 3740 1830 1200 7000 520 R 6200 19200 7600 1200 5800 narrow
Hydraulic Crawler Crane
Hydraulic Crawler Crane Model : CKE2500G Max. Lifting Capacity : 250 t x 4.6 m Max. Lifting Capacity With Luffing Jib: 80 t x 9.8 m Max. Crane Boom Length : 91.4 m Max. Luffing Boom Length: 61.0 m Max.
LOAD CHART MANUAL FOR RT55 ROUGH TERRAIN CRANE
Address:Quantang Indust=rial Park, 2nd Yuanda Road, Changsha Economic and Technological Development Zone, Hunan Province, China Postcode: 410131 Website: www.zoomlion.com LOAD CHART MANUAL FOR RT55 ROUGH
Technical data Hydraulic lift crane LR 1300 LR 1300
Technical data Hydraulic lift crane LR 1300 LR 1300 Dimensions Basic machine with undercarriage R 9750 3600 10350 6930 3000 LR1300 2250 1600 5000 1465 1700 8500 9650 4260 1870 1200 8000 400 R 6980 Optional:
47,000 Ib ( kg) maximum lifting capacity. 101 (30.78 m) maximum sheave height. 144 (43.89 m) maximum sheave height with (
Boom Truck Crane TRUCK CRANE FEATURES 47,000 Ib (21 319 kg) maximum lifting capacity 101 (30.78 m) maximum sheave height 144 (43.89 m) maximum sheave height with 26-44 (7.92-13.41 m) jib 29-92 (8.84-28.04
HYDRAULIC CRAWLER CRANE
HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 250 t x 4.6 m Max. Crane Boom Length: 76.2 m Max. Long Boom Length: 9.4 m Max. Fixed Jib Combination: 76.2 + 30.5m Max. ower Jib Combination: 64. + 5.8 m
To learn more about this model, call or visit giuffre.com today! GIUFFRE.COM. 34,000 Ib ( kg) maximum lifting capacity
Boom Truck Crane TRUCK CRANE FEATURES 34,000 Ib (13 607 kg) maximum lifting capacity 80 (24.38 m) maximum sheave height 120 (36.57 m) maximum sheave height with 24-40 (7.31-12.19 m) jib 27-70 (82.30-21.34
AMERICAN. These charts are not to be used for any other purpose. LOAD CHARTS for Use in CCO Written Examinations
LOAD CHARTS for Use in CCO Written Examinations AMERICAN LATTICE CRAWLER CRANE (LBC) These charts have been adapted from the original manufacturer s charts for use in NCCCO Written Examinations. These
Hydraulic Crawler Crane
Hydraulic Crawler Crane Model : CKS800 Max. Lifting Capacity: 80 t x 3.0 m Max. Crane Length: 54.9 m Max. Fixed Jib Combination: 42.7 m + 18.3 m 45.7 m + 12.2 m CKS800 CONENS 3 5 6 7 10 11 14 15 16 17
model 5500 product guide contents 55 ton Lift Capacity Maximum Load Moment 160' Heavy-Duty Boom on Heavy-Duty Boom 213 HP engine 338 fpm line speed
55 ton ift Capacity ft-kips,28 Maximum oad Moment product guide ' eavy-duty Fixed Jib ' on eavy-duty 23 P engine 338 fpm line speed 35,000 lb Maximum ine Pull lb Material Rehandling 5,0 Clamshell capacity
data model 222 product guide contents features 91 mton (100 ton) capacity Specifications 2 Outline Dimensions 6 Transport Data 12
data features 9 mton (00 ton) capacity 07 mton-m (,4 ft-kips) Maximum oad Moment 6,0 m (00') eavy-ift 76, m (50') Fixed Jib on eavy-ift 80,8 m (65') uffing Jib on eavy-ift 96,0 m (5') Fixed Jib on uffing