model 999 product guide contents features 250 mton (275 ton) capacity mton-m (8,268 ft-kips) Maximum Load Moment 88,4 m (290') Heavy-Lift Boom

Transcription

1 features 50 mton (75 ton) capacity 5 mton-m (8,68 ft-kips) Maximum oad Moment 88, m (90') eavy-ift 0,6 m (0') ong-reach 00,6 m (0') Fixed Jib on eavy-ift 5,8 m (80') Fixed Jib on ong-reach 90 kw (75 P) engine EPIC controls 8,0 m (0') uffing Jib 6, m (80') Fixed Jib on uffing Jib m/min (0 fpm) line speed standard kn (9,500 lb) line pull standard 8 kg (9,500 lb) Clamshell capacity 9 00 kg (0,000 lb) Dragline capacity Fast, efficient self-assembly and disassembly Complete crane, maximum boom, fixed jib and counterweight ships on only trucks eaviest module weight of kg (87,500 lb) maximum module width of,0 m (9 0 ) Manitowoc CraneCARESM comprehensive support product guide contents Specifications Outline Dimensions 8 Transport / Assembly 9 Performance Data Combinations Main & ong-reach Range / oad Charts 0 Fixed Jib Range / oad Charts 8 uffing Jib Range / oad Charts 6 Fixed Jib on uffing Jib Range / oad Charts 7 CraneCARE SM 80 Above. Beyond. Everywhere. TM

2 index Specifications Outline Dimensions and Weights Wire Rope engths Wire Rope Specifications Raising Combinations Range Diagram and Capacity Charts No. 999 Basic Crane Engine(s) ydraulic System Drums oist Swing System Mast and Gantry Counterweights Operator s Cab Carbody Crawlers Optional Equipment point ook block/weight ball Miscellaneous Special Applications Clamshell/Dragline, 0, Working Weights Transport/Assembly CraneCARE SM No. 8 eavy-ift eavy-ift with No. Fixed Jib eavy-ift with No. 5 uffing Jib eavy-ift with No. 9 uffing Jib eavy-ift with No. 8 Fixed Jib on No. 5 uffing Jib eavy-ift with No. Fixed Jib on No. 9 uffing Jib ong Reach ong Reach with No. Fixed Jib ong Reach with No. Fixed Jib No. E eavy-ift eavy-ift with No. Fixed Jib eavy-ift with No. 5 uffing Jib eavy-ift with No. 8 Fixed Jib on No. 5 uffing Jib Open Throat Top Open Throat Top with No. Fixed Jib ight Tapered Top ight Tapered Top with No. Fixed Jib

3 specifications Upperworks Engine Cummins Model QSM diesel, 6 cylinder, 80 kw (75 00 governed RPM. Caterpillar Model 76 diesel, 6 cylinder, 9 kw (90 00 governed RPM. Includes engine block heater (0 V), ether starting aid, manually operated disconnect clutch for cold weather starting, high silencing muffler, hydraulic oil cooler, radiator and fan. Multiple hydraulic pump drive transmission provides independent power for all machine functions. Two volt maintenance-free, Group 8D batteries, 00 CCA at -8 C (0 F), volt starting and 0 amp alternator. Optional: consult factory for other available engines. One 6 l (70 gal) capacity diesel fuel tank, mounted on rear of upperworks, with level indicator in operator s cab. System kg/cm (psi) lpm (gpm) Front Drum (6,000) 79 (00) Rear Drum (6,000) 79 (00) oist (6,000) 7 (60) Swing System 86 (5,500) 7 (60) eft Crawler (6,000) 7 (60) Right Crawler (6,000) 7 (60) Auxiliary Pump* (6,000) 79 (00) *Optional pump powers auxiliary drum on liftcrane or main hoisting drum on RINGER attachment. ydraulic reservoir capacity is 5 l (0 gal) and is equipped with breather, dipstick, clean out access, and internal diffuser. Each function is equipped with relief valves to protect the hydraulic circuit from overload or shock. Replaceable, spin on ten micron (absolute) full flow line filter is furnished in the hydraulic circuit. All oil is filtered prior to return to the hydraulic reservoir. ydraulic system also includes pump transmission disconnect clutch & hydraulic oil cooler. Drums Controls Modulating electronic-over-hydraulic controls provide infinite speed response directly proportional to control lever movement. Controls include Manitowoc's exclusive EPIC Electronically Processed Independent Control system providing microprocessor driven control logic, pump control, on-board diagnostics, and service information. Block-up limit control is standard for hoist and whip lines. Integrated oad Moment Indicator system (MI) is standard for main boom and upper boom point. Function cut-out or warning only operation is available via a keyed switch on the MI console. Optional travel and swing alarms are available. Optional foot controls for travel. ydraulic System Six high-pressure piston pumps are driven through a multi-hydraulic pump transmission. These six pumps provide independent closed loop hydraulic power for front drum, rear drum, boom hoist system, swing system, and both left and right crawler operation. Two equal width winches 90 mm (7") wide and 50 mm (-/") diameter are driven by independent variable displacement axial piston hydraulic motors through planetary reduction mounted on separate front and rear shafts with anti-friction bearings. Drums are grooved for 6 mm rope. Powered hoisting/lowering operation is standard with automatic (spring applied, hydraulically released) multidisc brakes, and drum rotation indicators. Optional free-fall operation for front and/or rear drum(s). Wet disk brake manually applied by foot pedal with locking latch in operator s cab. Operator may select free-fall or powered lowering mode using a selector switch. Optional auxiliary (third) hydraulic powered drum rated at 8 kn (0,000 lb) line pull mounted in boom butt. Includes third drum control system. Optional auxiliary drum preparation includes electric wiring, controls, hydraulic pump and plumbing. Optional bolt-on clamshell/dragline laggings. Optional wire rope for various applications.

4 specifications oist Independent boom hoist consists of a mm (-/") wide and 8 mm (9") diameter drum grooved for, mm (7/8") diameter wire rope. Includes, m (,060') of, mm (7/8") diameter wire rope for 0 part line reeving. Drum is powered by a fixed displacement hydraulic motor coupled to an internal brake and planetary gearbox equipped with ratcheting pawl. hoist speed: raise 88, m (90') full main boom from 0-8 in minutes, 50 seconds. Mast and Gantry Moving mast is 9,8 m (') long and connects the boom hoist reeving to the steel boom suspension strap rigging. When used with optional self-erect package, the mast is utilized for crane assembly and disassembly. It is capable of lifting and positioning the crawler assemblies, stacking the counterweights, and assembling the boom and jib. Gantry includes gantry raising cylinders capable of lifting the entire upperworks counterweight for removal and installation. Counterweight attaches to rotating bed with power actuated pins. Air cushioned boom stop and automatic boom stop standard. greater versatility for transport of boom and counterweight sections where specific markets have transport restrictions. Swing System igh strength fabricated steel alloy rotating bed is mounted on,76 m (08-9/6") diameter turntable triple-row ball bearing. Independent swing powered by a fixed displacement hydraulic motor coupled to a planetary gearbox with internal brake. 60 positive swing lock. Swing system maximum speed:.8 rpm. Operator s Cab Fully enclosed and insulated steel module located on a pivoting mount at the left front corner of rotating bed, allowing module repositioning for transportation. Module is equipped with sliding door, large safety glass windows on all sides and roof. Signal horn, cab space heater, front and roof windshield wipers, dome light, sun visor and shade, fire extinguisher and air circulating fan are standard. Optional air conditioner. Optional nylon protective window covers. Counterweight owerworks UNIT WEIGT TOTA WEIGT QTY. ITEM kg lb kg lb Upperworks Tray 9 57, ,00 Center Box 0 660, ,500 6 Upper Side Box , ,000 SERIES TOTA ,600 Upperworks Upper Side Box , ,000 Carbody ower Box 9 978, ,000 Optional: Add to SERIES for SERIES TOTA ,600 Upperworks Upper Side Box , ,000 Carbody Upper Box , ,000 Optional: Add to SERIES for SERIES TOTA ,600 Includes connecting pins, brackets, and stops. Optional low-profile counterweight boxes for Series only. Consists of twelve 6 6 kg (,600 lb) upper side counterweight boxes in lieu of the standard ten 7 98 kg (7,500 lb) counterweight boxes. ow profile boxes allow Carbody Connects rotating bed to crawler assemblies. igh strength fabricated steel assembly with FACT TM connection system for fast installation and removal of crawler assemblies. Crawlers Crawler assemblies are 8,59 m (8' ") long with, m (8") wide cast steel crawler pads and sealed low maintenance intermediate rollers. Each crawler is identical and can be mounted on either side of the carbody. Each crawler is powered independently by a variable displacement hydraulic motor and includes two hydraulically powered pin actuators for fast installation and removal from carbody. Carbody mounted drive motors are connected to crawler final reduction via telescoping shafts. This permits crawlers to be removed without opening their hydraulic circuits. Crawlers provide

5 specifications ample tractive effort that allows counter rotation with full rated load. Maximum ground speed of,6 kph (.0 mph). Optional Self-Erect system includes: carbody jacking cylinders with pads, controls, mton (5 ton) assembly block, boom-butt installation support, and crawler handling chains. Attachments No. 8 ong Reach Top Optional 5, m (50') No. 8 basic long reach boom top with four 76, cm (0") diameter straight roller bearing sheaves. Includes rope guides, steel boom suspension straps, and FACT TM connection system. Utilizes existing 9, m (0') butt and No. 8 boom inserts for lengths up to 0,6 m (0'). Requires one, m (0') light weight boom insert for lengths equal to or greater than 9, m (0'). 5 No. 8 eavy-ift Main The liftcrane is equipped with a, m (70') No. 8 basic heavy-lift angle chord boom consisting of a 9, m (0') butt and, m (0') top with eight 76, cm (0") diameter roller bearing sheaves on one shaft. Includes rope guides, boom hoist wire rope, and boom angle indicator. The No. 8 boom utilizes steel suspension straps and Manitowoc s patented, exclusive FACT TM connection system. The FACT connection system consists of two vertical pins, two horizontal connection pins and alignment pads for each boom connection location. Powered boom hinge system including cylinder, piping, operating controls and locking device standard. uffing jib preparation included as standard. Optional,0 m (0'), 6, m (0'), and, m (0') No. 8 boom inserts with steel boom suspension straps, and FACT TM connection system. No. Fixed Jib Optional No. basic fixed jib 9, m (0') length consisting of,6 m (5') jib butt and,6 m (5') jib top with,7 m (') jib strut, pendants and backstay. Includes MI hardware. For use with booms No. 8, No. 8R, or No. E, or as a fixed jib extension on No. 9 luffing jib. Optional No. fixed jib inserts,0 m (0') and 6, m (0') with pendants. Utilize fixed jib inserts in combination with the No. basic fixed jib for total lengths up to, m (80'). Note: Jib lengths greater than 8, m (60') require the use of at least one 6, m (0') No. fixed jib insert. No. Fixed Jib Optional No. 8 or No. E detachable upper boom point with one 76, cm (0") diameter tapered roller bearing steel sheave grooved for 6 mm or (") rope with rope guard for liftcrane. Optional No. E basic heavy-lift boom similar to No. 8 described above, but with pinned boom connections and boom suspension pendants in lieu of FACT TM boom connection system and steel boom suspension straps. Optional,0 m (0'), 6, m (0'), and, m (0') No. boom inserts with pinned boom connections and boom suspension pendants. Optional, m (0') No. C open throat top with with six 76, cm (0") diameter straight roller bearing sheaves on one shaft and boom suspension pendants. Used with No. E boom butt and inserts. Optional 5, m (50') No. E light tapered top and 9, m (0') tapered insert with pinned boom connections and boom suspension pendants. Used with No. E boom butt and inserts. Optional No. basic fixed jib 9, m (0') length consisting of,6 m (5') jib butt and,6 m (5') jib top with,7 m (') jib strut, pendants and backstay. For use with No. 8R boom top, No. C open throat top or No. E light tapered top. Optional No. fixed jib inserts,0 m (0') and 6, m (0') with pendants. Utilize fixed jib inserts in combination with the No. basic fixed jib for total lengths up to 8, m (60'). No. 9 uffing Jib Optional, m (70') basic No. 9 luffing jib assembly with MI hardware consisting of 7,6 m (5') butt, 6, m (0') insert and 7,6 m (5') top with three 68,6 cm (7") straight roller bearing sheaves and pin connected jib sections, steel jib suspension straps, fixed strut, jib strut, backstay straps, jib point wheel, 6 mm luffing jib hoist line, and FACT TM connection system. Used only with No. 8 heavy-lift boom.

6 specifications 6 Optional,0 m (0'), 6, m (0'), and, m (0') No. 9 inserts with steel jib suspension straps. Utilize luffing jib inserts in combination with the No. 9 basic luffing jib for total lengths up to 7, m (0'). Optional 6, m (0') insert with sheaves and guides for intermediate fall that provides up to two-part load line at intermediate position in luffing jib. Use of insert may require intermediate luffing jib suspension. Can be assembled in the air. Note: Only one,0 m (0') insert is allowed in the luffing jib. No. 5 uffing Jib Optional, m (70') basic No. 5 luffing jib assembly with MI hardware consisting of 8, m (7') butt, 6, m (0') insert, and 7,0 m (') top with two 68,6 cm (7") straight roller bearing sheaves and pin connected jib sections, pendants, fixed strut, jib strut, backstay pendants, boom point wheel, 6 mm luffing jib hoist line. For use with No. 8 or No. E boom. Optional,0 m (0'), 6, m (0'), and, m (0') No. 5 inserts with pendants. Utilize luffing jib inserts in combination with the No. 5 basic luffing jib for total lengths up to 57,8 m (70'). Optional luffing jib fold-under erection equipment includes wire rope guide and manual pin release parts to allow jib to fold under. Note: Only one,0 m (0') insert is allowed in the luffing jib. Note: 7 m (') top, inserts, and pendants for inserts from No. boom can be used as part of No. 5 luffing jib. No. boom top requires modifications. No. 8 Fixed Jib Extension Optional Equipment Optional Blocks and ooks,6 mton (5 ton) swivel hook and weight ball. mton (5 ton) hook block with one 76, cm (0") sheave for 6 mm or (") wire rope with swivel hook, hook latch, and swivel lock (assembly block). 5 mton (60 ton) hook block with two 76, cm (0") sheaves for 6 mm or (") wire rope with swivel hook, hook latch, and swivel lock. 9 mton (00 ton) hook block with three 76, cm (0") sheaves for 6 mm or (") wire rope with swivel hook, hook latch, and swivel lock. 8, mton (00 ton) hook block with six 76, cm (0") sheaves for 6 mm or (") wire rope with swivel hook, hook latch, and swivel lock Upper block single sheave to be added to 8, mton (00 ton) load block for upgrade to 08,6 mton (0 ton) capacity 00 mton (0 ton) hook block with seven 76, cm (0") sheaves for 6 mm or (") wire rope with swivel hook, hook latch, and swivel lock 7 mton (50 ton) hook block with eight 76, cm (0") sheaves for 6 mm or (") wire rope with swivel hook, hook latch, and swivel lock. Optional ydraulic Test Kit: required to properly analyze the performance of the EPIC control system. Optional Service Interval Kits: for the regularly scheduled maintenance of general crane operations. Optional ighting Packages: consult Factory for available options. Optional Special Paint: in color(s) other than Manitowoc standard red and black. Optional 9, m (0') basic fixed jib extension includes jib stop, backstay, wheel, and mounting parts for use on No. 5 luffing jib. Optional No. 8,0 m (0') inserts with pendants. Utilize fixed jib inserts in combination with the No. 8 basic fixed jib extension for total lengths up to 8, m (60'). Note:,6 m (5') top,,0 m (0') inserts, pendants for inserts, and 5,5 m (8') strut from No. fixed jib can be used as part of No. 8 fixed jib extension. No. jib top requires modifications. Optional Special Customer Decals: custom vinyl decal(s) of name and/or logo from artwork supplied by customer. Optional Export Packaging: basic crane, boom and jib sections.

7 specifications Optional Applications 7 Options for limited clamshell work: guide bars for lower boom point; Rud-O-Matic No. 866 springpowered three-barrel tagline with 76, cm (6") diameter wheel; and pressure rollers for the front and rear hoisting drums. Front drum is closing line. Rear drum is holding line. Manitowoc s EPIC controls can be changed from liftcrane to clamshell mode with the flip of a switch. On units equipped with the (pin-connected, pendantsupported) E boom, it is also possible to replace the boom top with the open-throat top for improved performance in clamshell operation. The open throat top may not be mounted to the (FACT connected, strapsupported) No. 8 boom. Options for dedicated clamshell work. Manitowoc recommends: the open throat top, the detachable upper boom point with two 9, cm (6") diameter rollerbearing-mounted sheaves and cheek plates, pressure rollers on the front and rear drums, and the Rud-O- Matic No. 866 spring-powered three-barrel tagline with 76, cm (0") diameter wheel. Freefall hoisting drums are also recommended. Front drum is closing line. Rear drum is holding line. Options for limited dragline work. Manitowoc recommends these options: Guide bars for lower boom point; pressure rollers for the front and rear hoisting drums, freefall drums, and fairlead with dirt guard. Front drum is drag line. Rear drum is hoist line. Manitowoc s EPIC controls can be changed from liftcrane to dragline mode with the flip of a switch. On units equipped with the (pin-connected, pendantsupported) E boom, it is also possible to replace the boom top with the open-throat top for improved performance in dragline operation. The open throat top may not be mounted to the (FACT -connected, strapsupported) No. 8 boom.

8 outline dimensions 8

9 outline dimensions 9

10 outline dimensions 0 Basic Crane x ength,87 m 8' " Width,00 m 9' 0" eight,8 m ' " Weight kg 87,500 lb Note: Weight includes carbody, upperworks, operator s cab, gantry, backhitch, mast, boomhoist wire rope, maximum hoist and whip lines on drums, optional self-assembly jacks, full hydraulic fluid reservoir, and half tank of fuel. W W Crawlers with Catwalks x ength 8,59 m 8' " Width,8 m ' 0" eight,0 m ' " Weight 9 6 kg,60 lb Upper Center Counterweight x ength, m 7' 7" Width,7 m ' " eight,7 m 5' 7" Weight kg,500 lb W Counterweight Tray x ength, m 7' " Width,96 m ' 0" eight 0, m ' " Weight 9 58 kg,050 lb W W Upper Side Counterweight Standard Profile Series x 6 Series x 8 Series x 0 ength, m 7' " Width,07 m ' 6" eight 0,69 m ' " Weight 7 98 kg 7,500 lb

11 outline dimensions W Upper Side Counterweight Optional ow Profile Series Only x ength, m 7' " Width,07 m ' 6" eight 0,8 m ' 7" Weight 6 6 kg,85 lb W ower Carbody Counterweight Series, x ength,97 m 9' 9" Width,80 m 5' " eight 0,8 m ' 8" Weight kg,000 lb W Upper Carbody Counterweight Series x ength,7 m 9' 0" Width,50 m ' " eight 0,9 m ' " Weight 8 65 kg 8,000 lb No. 8 Butt 9, m (0') & Wire Rope Guide, Stop x ength 0,9 m ' 5" Width, m 7' " eight,7 m 8' " Weight 90 kg 0,85 lb Note: Includes boom butt support for self-erect option, boom angle indicator, and cable reel. No. 8 Top, m (0') & Wire Rope Guide, Straps x ength,75 m ' 0" Width, m 7' " eight,8 m 9' " Weight kg,65 lb Option

12 outline dimensions No. 8 Main,0 m (0') Insert & Straps x, ength,0 m 0' 6" Width, m 7' " eight,59 m 8' 6" Weight 97 kg,0 lb No. 8 Main 6, m (0') Insert & Straps x, ength 6,5 m 0' 6" Width, m 7' " eight,5 m 8' " Weight 97 kg,080 lb No. 8 Main, m (0') Insert & Straps x,,,, 5 ength, m 0' 6" Width, m 7' " eight,5 m 8' " Weight kg 5,60 lb No. 8 ong Reach Top 5, m (50') & Wire Rope Guide, Straps x ength 6,0 m 5' 7" Width, m 7' " eight,5 m 8' " Weight 6 kg 7,090 lb No. 8 ong Reach ight Weight, m (0') Insert & Straps x ength, m 0' 6" Width, m 7' " eight,5 m 8' " Weight 7 kg,75 lb Option

13 outline dimensions No. E Butt 9, m (0') & Wire Rope Guide, Stop x ength 0,9 m ' 5" Width, m 7' " eight,7 m 8' " Weight 79 kg 0,570 lb Note: Includes boom butt support for self-erect option, boom angle indicator, and cable reel. No. Top, m (0') & Wire Rope Guide, Pendants x ength,75 m ' 0" Width, m 7' " eight,8 m 9' " Weight 5 55 kg,585 lb No. C Top, m (0') & Wire Rope Guide, Pendants x ength,89 m ' " Width, m 7' " eight, m 7' " Weight 7 kg 9,780 lb No. E Main,0 m (0') Insert & Pendants x, ength,8 m 0' 5" Width, m 7' " eight,57 m 8' 5" Weight 87 kg,95 lb No. E Main 6, m (0') Insert & Pendants x, ength 6, m 0' 5" Width, m 7' " eight,57 m 8' 5" Weight 6 kg,0 lb No. E Main, m (0') Insert & Pendants,,,, 5 ength, m 0' 5" Width, m 7' " eight,57 m 8' 5" Weight 0 kg 5,00 lb Option

14 outline dimensions No. E ight Tapered Top 5, m (50') & Pendants x ength 5,90 m 5' " Width,9 m 6' " eight,67 m 5' 6" Weight 967 kg 6,50 lb No. E ight Tapered Top 9, m (0') Tapered Insert & Pendants x ength 9,7 m 0' 5" Width, m 7' " eight, m 7' " Weight 855 kg,090 lb No. Jib Butt,6 m (5') & Strut, Stop x ength,67 m 5' " Width 0,86 m ' 0" eight,9 m ' " Weight 65 kg,00 lb No. Jib Top,6 m (5') & Pendants x ength,9 m 6' " Width 0,79 m ' 7" eight 0,79 m ' 7" Weight 55 kg,0 lb No. Jib Insert,0 m (0') & Pendants x ength, m 0' " Width 0,79 m ' 7" eight 0,79 m ' 7" Weight 8 kg 80 lb No. Jib Insert 6, m (0') & Pendants x, ength 6,7 m 0' " Width 0,79 m ' 7" eight 0,79 m ' 7" Weight 0 kg 750 lb Option

15 outline dimensions No. Jib Butt,6 m (5') & Strut x ength,75 m 5' 7" Width 0,86 m ' 0" eight,6 m ' 0" Weight 60 kg,05 lb 5 No. Jib Top,6 m (5') & Pendants x ength,9 m 6' " Width 0,79 m ' 7" eight 0,79 m ' 7" Weight kg 90 lb No. Jib Insert,0 m (0') & Pendants x,, ength, m 0' " Width 0,79 m ' 7" eight 0,79 m ' 7" Weight 7 kg 80 lb No. Jib Insert 6, m (0') & Pendants x ength 6,7 m 0' " Width 0,79 m ' 7" eight 0,79 m ' 7" Weight kg 750 lb No. 5 uffing Jib 8, m (7') Butt & Struts x ength 8,8 m 8' " Width,57 m 5' " eight,9 m 9' 7" Weight 77 kg 9,870 lb No. 5 uffing Jib Top 7,0 m (') & Roller, Pendants x ength 7,80 m 5' 7" Width,5 m 5' 0" eight,0 m 6' 8" Weight 98 kg,75 lb Note: Includes wire rope guide. Option

16 outline dimensions 6 No. 5 uffing Jib Insert,0 m (0') & Pendants x ength,5 m 0' " Width,5 m 5' 0" eight,0 m ' " Weight 8 kg 80 lb No. 5 uffing Jib Insert 6, m (0') & Pendants x, ength 6,0 m 0' " Width,5 m 5' 0" eight,0 m ' " Weight 6 kg,50 lb No. 5 uffing Jib Insert, m (0') & Pendants x,, ength,9 m 0' " Width,5 m 5' 0" eight,0 m ' " Weight 050 kg,5 lb No. 9 uffing Jib 7,6 m (5') Butt & Struts x ength 0, m ' " Width,08 m 6' 0" eight,0 m 0' " Weight 5 78 kg,60 lb No. 9 uffing Jib Top 7,6 m (5') & Roller, Straps x ength 0, m ' 7" Width,08 m 6' 0" eight,9 m 8' " Weight 66 kg 5,875 lb Note: Includes wire rope guide, roller and sheave for upper boom point. No. 9 uffing Jib Insert,0 m (0') & Straps x ength, m 0' 7" Width,08 m 6' 0" eight,9 m 6' " Weight 578 kg,80 lb Option

17 outline dimensions No. 9 uffing Jib Insert 6, m (0') & Straps x, ength 6,7 m 0' 7" Width,08 m 6' 0" eight,9 m 6' " Weight 9 kg,080 lb 7 No. 9 uffing Jib Insert INTERMEDIATE FA 6, m (0') & Straps x ength 6,7 m 0' 7" Width,08 m 6' 0" eight,9 m 8' " Weight 7 kg,05 lb No. 9 uffing Jib Insert, m (0') & Straps x,,, ength,7 m 0' 7" Width,08 m 6' 0" eight,9 m 6' " Weight 660 kg,665 lb No. 8 Fixed Jib,6 m (5') Butt & Strut x ength 5,6 m 8' 6" Width,08 m 6' 0" eight,9 m 6' " Weight 50 kg 775 lb No. 8 Fixed Jib,6 m (5') Top & Roller, Pendant x ength 5,5 m 8' " Width 0,76 m ' 6" eight,05 m ' 5" Weight 70 kg 87 lb No. 8 Jib Insert,0 m (0') & Pendants x,, ength, m 0' " Width 0,76 m ' 6" eight 0,58 m ' " Weight 98 kg 5 lb Option

18 outline dimensions 8 No. 8 or No. E Upper Point x ength,6 m 8' 8" Width 0, m ' " eight 0,8 m ' 8" Weight 0 kg 95 lb No. 8 ong Reach top Upper Point x ength,09 m ' 7" Width 0,7 m ' " eight,0 m ' " Weight 57 kg 5 lb W ook block for 6 mm or (") wire rope Capacity 7 mt 50 t ength,9 m 7' 0" Weight 7 kg 6,050 lb Width 0,9 m ' " Capacity* 00 mt 0 t ength,8 m 7' 5" Weight 06 kg 6,670 lb Width 0,89 m ' " Capacity 8 mt 00 t ength,8 m 7' 5" Weight 50 kg 5,600 lb Width 0,89 m ' " Capacity 9 mt 00 t ength,98 m 6' 6" Weight 769 kg,900 lb Width 0,89 m ' " Capacity 55 mt 60 t ength,80 m 5' " Weight 0 kg,650 lb Width 0,89 m ' " *Single sheave upper block can be added for 08,6 mton (0 ton) capacity. W Self Assembly ook block for 6 mm or (") wire rope Capacity mt 5 t ength,8 m 6' 0" Weight 79 kg,600 lb Width 0,9 m ' 0" D Weight Ball Capacity/Swivel,6 mt 5 t Diameter 0,56 m ' 0" Weight 59 kg 0 lb ength,07 m ' 6" Option

19 transport data Trailer oad Out Summary Model 999 Series No. Fixed Jib, m (80') and No. 8 9, m (00') 9 Item Weight Quantity on each Item Trailer oad # Trailer oad # kg (lb) * No. 999 Basic Crane (87,500) Crawler Assembly 9 6 (,60) Counterweight Tray Upper Center Counterweight 9 58 (,050) (,500) Upper Side Counterweight 7 98 (7,500) ower Carbody Counterweight (,000) Upper Carbody Counterweight 8 65 (8,000) 9, m (0') No. 8 Butt** 90 (0,85), m (0') No. 8 Top (,65),0 m (0') No. 8 Insert 6, m (0') No. 8 Insert 97 (,0) 97 (,080), m (0') No. 8 Insert*** (5,60) *** 0,0 m (0') No. Jib & Strut,0 m (0') No. Jib Insert 88 (,60) 8 6, m (0') No. Jib Insert 0 (750) 7 mton (50 ton) ook Block 7 (6,050) mton (5 ton) Self-assembly Block 79 (,600),6 mton (5 ton) Weight Ball 59 (,0) No. 8 Upper Point 0 (95) Miscellaneous Approximate Total Shipping Weight kg (lb) 8 (,000) (87,500) 08 (6,60) 8 (7,60) (5,85) 85 (7,65) 0 07 (50) * Step deck trailer recommended. ** Does not include auxiliary drum. *** One insert includes jib backstay lugs (0,60) 8 07 (0,60) 8 07 (0,60) (7,0) 5 8 (,595) (,0)

20 transport data 0

21 crane assembly Note: Read the assembly folio in the operator s manual for a complete description of approved crane assembly procedures.

22 performance data Wire Rope engths No. 8 or No. E - or - Fixed Jib No. on No. 8 or No. E Whip ine oist line or and Fixed Jib ength Front or Aux Drum ( Part of ine) m (ft) Front or Aux Drum ( Parts of ine) m Rear Drum (ft) Maximum Required Parts of ine,, 7, 0,5 (00),5 (0) (0) 9,6 (0),7 (0) 5,7 (50) 8,8 (60) 5,8 5,9 57,9 6,0 6,0 (0) 67, (0) 70, (0) 7, (0) 76, (50) 79, (60) 8, 85, (80) 88, (90) 9, (00) 9 (0) 97,5 (0) 00,6 (0) (0) (0) (60) (80) (00) (0) (0) (60) (80) (00) (0) (0) (60) (500) (50) (50) (560) (580) (600) (60) (60) (660) (680) (700) (00) (0) (60) (90) (0) (50) (500) (50) (560) (590) (60) (650) (680) (770) (800) (80) (860) (890) (90) (950) (980) (,00) (,5) (,500) (,500) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) NOTE: ine lengths given in table will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of line times added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Front and rear drums each provide kn (9,500 lb) maximum single line pull. Auxiliary drum provides 89 kn (0,000 lb) maximum single line pull

23 performance data Wire Rope engths uffing Jib No. 9 on No. 8 ength oist ine Front Drum Whip ine Front Drum or Auxiliary Drum Intermediate Fall ine Auxiliary Drum Part Part Part Part m (ft) m (ft) m (ft) m (ft) m (ft) m (ft), 8 (50) 0 (690) (05) 0 (60) 0 (690) 7, 96 (00) 6 8 (075) 6 9 0,5 (00) 96 (00) 5 (00) 5 (500) 9 (750),5 (0) (50) 9 (750) (5) 58 (50) 8 (780) (0) (50) 5 (770) 5 (50) 65 (50) 7 9,6 (0) 7 (00) (790) 58 (75) 7 (560) 56,7 (0) (50) 7 7 (5) 77 (580) 65 (870) 5,7 (50) (50) 5 (80) 8 (50) 8 (600) 7 (900) 8,8 (60) (50) 59 (850) 89 (75) 89 (60) 8 (90) 5,8 (50) 65 (870) 96 (00) 95 (60) 9 (960) 5,9 (50) 7 (890) 0 (5) 0 (660) 0 (990) 57,9 (50) 77 9 (75) 07 (680) (00) 6,0 (50) 8 (90) 7 (00) (700) 0 (050) NOTE: ine lengths given in table will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of line times added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Front and rear drums each provide kn (9,500 lb) maximum single line pull. Auxiliary drum provides 89 kn (0,000 lb) maximum single line pull.

24 performance data Wire Rope engths uffing Jib No. 5 on No. 8 or No. E uffing Jib oist ine Wire Rope engths - Fixed Jib No. 8 on uffing Jib No. 5 on No. 8 or No. E and uffing Jib ength,7 (0) 5,7 (50) 8,8 (60) 5,8 5,9 57,9 6,0 6,0 (0) 67, (0) 70, (0) 7, (0) 76, (50) 79, (60) 8, 85, (80) 88, (90) Front Drum m (ft) (750) (800) (850) (900) (950) (,000) (,050) (,00) (,50) (,00) (,50) (,50) (,50) (,50) (,50) (,50) Maximum Required Parts of ine Auxiliary Drum m (ft) (750) (800) (850) (900) (950) (,000) (,050) (,00) (,50) (,00) (,50) (,00) (,50) (,00) (,50) (,500) Maximum Required Parts of ine, uffing Jib, and Fixed Jib ength 00,6 (0) 0,6 (0) 06,7 (50) 09,7 (60),8 5,8 (80) 8,9 (90),9 (00) 5,0 (0) 8,0 (0), (0) Whip ine Front or Aux Drum ( Part of line) m (ft) (690) (750) (770) (790) (80) (850) (870) (890) NOTE: ine lengths given in table will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of line times added travel distance. oisting distance or line pull may be limited when block travel below ground is required. 9, (00) 9 (0) 97,5 (0) (,50) (,50) (,50) (,500) (,500) (,500) Front and rear drums each provide kn (9,500 lb) maximum single line pull. Auxiliary drum provides 89 kn (0,000 lb) maximum single line pull. 00,6 (0) 8 (,50) 57 (,500) 0,6 (0) 8 (,50) 57 (,500) 06,7 (50) 8 (,50) 57 (,500) 09,7 (60) 8 (,50) 57 (,500),8 8 (,50) 57 (,500) NOTE: ine lengths given in table will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of line times added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Front and rear drums each provide kn (9,500 lb) maximum single line pull. Auxiliary drum provides 89 kn (0,000 lb) maximum single line pull.

25 performance data 5 Wire Rope engths No. 8R - or - Fixed Jib No. or No. on No. 8R or and Fixed Jib ength Front or Aux Drum ( Part of ine) m Whip ine (ft) Front or Aux Drum ( Parts of ine) m Rear Drum oist line (ft) Maximum Required Parts of ine (0) 9,6 (0),7 (0) 5,7 (50) 8,8 (60) 5,8 5,9 57,9 6,0 6,0 (0) 67, (0) 70, (0) 7, (0) 76, (50) 79, (60) 8, 85, (80) 88, (90) 9, (00) 9 (0) 97,5 (0) 00,6 (0) 0,6 (0) 06,7 (50) 09,7 (60),8 5,8 (80) (80) (00) (0) (0) (60) (80) (00) (0) (0) (60) (500) (50) (50) (560) (580) (600) (60) (60) (660) (680) (700) (760) (780) (800) (500) (50) (560) (590) (60) (650) (680) (770) (800) (80) (860) (890) (90) (950) (980) (,00) (,00) (,070) (,00) (,0) (,00) (,00) (,500) (,600) (,600) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) (,65) NOTE: ine lengths given in table will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of line times added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Front and rear drums each provide kn (9,500 lb) maximum single line pull. Auxiliary drum provides 89 kn (0,000 lb) maximum single line pull

26 performance data 6 Wire Rope engths No. E with Open Throat Top - or - Fixed Jib No. on No. E with Open Throat Top Whip ine oist line Auxiliary oist ine* or and Fixed Jib ength Rear Drum ( part of line) Rear Drum ( parts of line) Front Drum Maximum Required parts of line Auxiliary Drum Maximum Required parts of line,, 7, 0,5 (00),5 (0) (0) 9,6 (0),7 (0) 5,7 (50) 8,8 (60) 5,8 5,9 57,9 6,0 6,0 (0) 67, (0) 70, (0) 7, (0) 76, (50) 79, (60) 8, 85, (80) 88, (90) 9, (00) 9 (0) 97,5 (0) m (ft) (0) (0) (60) (80) (00) (0) (0) (60) (80) (00) (0) (0) (60) (500) (50) (50) (560) (580) (600) (60) (60) (660) (680) m (ft) (60) (90) (0) (50) (80) (0) (0) (500) (50) (560) (590) (60) (650) (680) (770) (800) (80) (860) (890) (90) (950) m (ft) (,50) (,00) (,50) (,500) (,500) (,55) (,55) (,55) (,575) (,575) (,600) (,600) (,600) (,600) (,600) (,600) (,600) (,600) (,600) (,600) (,600) (,600) (,600) Inline Offset m (ft) (,00) (,50) (,600) (,750) (,900) (,050) (,00) (,00) (,00) (,00) (,00) (,00) (,00) (,00) (,00) (,00) (,00) (,00) (,00) (,00) (,00) (,00) Inline Offset NOTE: ine lengths given in table will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of line times added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Front and rear drums each provide kn (9,500 lb) maximum single line pull. Auxiliary drum provides 89 kn (0,000 lb) maximum single line pull. *Wire rope lengths greater than 65 m (,050') cannot be stored on auxiliary drum. Auxiliary drum cannot be used with, m (70') boom. Capacity chart restrictions will occur when auxiliary drum is used. Auxiliary drum maximum capacity is 7 00 kg (80,000 lb) with parts line

27 performance data 7 Wire Rope engths No. E with ight Tapered Top - or - No. Fixed Jib on No. E with ight Tapered Top or and Fixed Jib ength Rear or Aux Drum ( Part of ine) m Whip ine (ft) Rear or Aux Drum ( Parts of ine) m Front Drum oist line (ft) Maximum Required Parts of ine,5 (0) (0) 9,6 (0),7 (0) 5,7 (50) 8,8 (60) 5,8 5,9 57,9 6,0 6,0 (0) 67, (0) 70, (0) 7, (0) 76, (50) 79, (60) 8, 85, (80) 88, (90) 9, (00) 9 (0) 97,5 (0) 00,6 (0) 0,6 (0) 06,7 (50) (60) (80) (00) (0) (0) (60) (80) (00) (0) (0) (60) (500) (50) (50) (560) (580) (600) (60) (60) (660) (680) (700) (80) (0) (0) (500) (50) (560) (590) (60) (650) (680) (770) (800) (80) (860) (890) (90) (950) (980) (,00) (,00) (,75) (,75) (,75) (,75) (,75) (,500) (,500) (,500) (,500) (,500) (,55) (,55) (,55) (,55) (,55) (,55) (,55) (,55) (,55) (,55) (,55) NOTE: ine lengths given in table will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of line times added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Front and rear drums each provide kn (9,500 lb) maximum single line pull. Auxiliary drum provides 89 kn (0,000 lb) maximum single line pull

28 performance data 8 Wire Rope Specifications 5: Safety Factor No. 8 or No. E or No. 8 with No. 8 ong Reach Top or No. E with Open Throat Top or No. E with ight Tapered Top - or - Fixed Jib No. on No. 8 or No. E or Fixed Jib No. on No. 8R or Fixed Jib No. on No. 8 with ong Reach Top or Fixed Jib No. on No. E with Open Throat Top or Fixed Jib No. on No. E with ight Tapered Top Function Part Number Size Wire Rope Minimum Breaking Strength 5: Safety Factor Rotation Resistant, 60 N/mm Wire rope with Pad Eye oist ine No mm 656, kn (7,500 lb) Whip ine No. 79 No. 790 No mm 656, kn (7,500 lb) Maximum Capacity oist ine No. 790 No mm 695, kn (56,50 lb) 5: Safety Factor Rotation Resistant, 960 N/mm Wire rope Auxiliary ine No No. 79 6mm 5,0 kn (00,000 lb) No. 799 (") 5,0 kn (00,000 lb) Maximum oad Per ine 80 kg (9,500 lb) 80 kg (9,500 lb) 75 kg (,50 lb) kg (0,000 lb) kg (0,000 lb) Approximate Weight,9 kg/m (.8 lb/ft),9 kg/m (.8 lb/ft),56 kg/m (.9 lb/ft),7 kg/m (. lb/ft),0 kg/m (.0 lb/ft) Wire Rope Specifications.5: Safety Factor No. 8 or No. E or No. 8 with No. 8 ong Reach Top or No. E with Open Throat Top or No. E with ight Tapered Top - or - Fixed Jib No. on No. 8 or No. E or Fixed Jib No. on No. 8R or Fixed Jib No. on No. 8 with ong Reach Top or Fixed Jib No. on No. E with Open Throat Top or Fixed Jib No. on No. E with ight Tapered Top Function Part Number Size Wire Rope Minimum Breaking Strength Maximum oad Per ine Approximate Weight.5: Safety Factor 6 x 5 Filler Wire, EIPS Right Regular ay, IWRC oist ine No mm 59,5 kn (0,50 lb) 80 kg (9,500 lb),89 kg/m (.9 lb/ft) Whip ine No mm 59,5 kn (0,50 lb) 80 kg (9,500 lb),89 kg/m (.9 lb/ft) Maximum Capacity oist ine No. 798* 6 mm 56, kn (9,00 lb) 75 kg (,50 lb),89 kg/m (.9 lb/ft) Auxiliary ine No mm,5 kn (70,000 lb) kg (0,000 lb),89 kg/m (.9 lb/ft) No. 79** ("),5 kn (70,000 lb) kg (0,000 lb),75 kg/m (.85 lb/ft) * EEIPS wire rope ** IPS wire rope

29 performance data Wire Rope Specifications 5: Safety Factor No. 8 Fixed Jib on No. 5 uffing Jib on No. 8 or No. E - or - No. Fixed Jib on No. 9 uffing Jib on No. 8 Function Part Number 5: Safety Factor Rotation Resistant 60 N/mm Wire rope with Pad Eye Whip ine No. 79 5: Safety Factor Rotation Resistant 960 N/mm Wire rope Auxiliary Drum Whip ine No No. 799 No Size Wire Rope 6 mm 6mm (") Minimum Breaking Strength 656, kn (7,500 lb) 5,0 kn (00,000 lb) 5,0 kn (00,000 lb) Maximum oad Per ine 80 kg* (9,500 lb)* kg (0,000 lb) kg (0,000 lb) Approximate Weight,9 kg/m (.8 lb/ft),7 kg/m (. lb/ft),0 kg/m (.0 lb/ft) * 7 kg (7,500 lb) for No. 8 Fixed Jib Extension. Wire Rope Specifications.5: Safety Factor No. 8 Fixed Jib on No. 5 uffing Jib on No. 8 or No. E - or - No. Fixed Jib on No. 9 uffing Jib on No. 8 Function Part Number.5: Safety Factor 6 x 5 Filler Wire, EIPS Right Regular ay, IWRC Whip ine No : Safety Factor 6 x 5 Filler Wire, EIPS Right Regular ay, IWRC Auxiliary Drum Whip ine No No. 79** Size Wire Rope Minimum Breaking Strength Maximum oad Per ine Approximate Weight 6 mm 59,5 kn (0,50 lb) 80 kg* (9,500 lb)*,89 kg/m (.9 lb/ft) * 7 kg (7,500 lb) for No. 8 Fixed Jib Extension. **IPS wire rope 6mm,5 kn (70,000 lb) kg (0,000 lb),89 kg/m (.9 lb/ft) ("),5 kn (70,000 lb) kg (0,000 lb),75 kg/m (.85 lb/ft)

30 performance data 0 Main & Whip Drums - kn (9,500 lb) ayer ine Pull kg (lb) 0) (0) Full Power Drum - Continuous Duty Single ine Pull/Single ine Speed 87 (85) 95 (0) m/min (ft/min) 5 0 (5) 0 (60) 9 (90) 6 7 (5) 7 (0) Auxiliary Drum - 8 kn (0,000 lb) ayer ine Pull kg (lb) 0) (0) Full Power Drum - Continuous Duty Single ine Pull/Single ine Speed m/min (ft/min) 6 6 (80) 6 68 (550) 68) (5,000) 8 90 (95) 98 (0) 05 (5) (65) 9 (90) 7 (5) 68) (5,000) 0 (60) 7 (50) 56 (50) 56) (0,000) 79 (60) 87 (85) 9 (05) 99 (5) 05 (5) (65) 7 (85) 56) (0,000) 0 (0) 8 (0) 6 80) (5,000) 76 (50) 8 88 (90) 9 (05) 96 (5) 98 (0) 99 (5) 6 80) (5,000) 95 (0) 98 (0) 98 (0) 9 07) (0,000) 7 (5) 7 (0) 75 (5) 76 (50) 78 (55) 79 (60) 8 (65) 9 07) (0,000) 7 (0) 76 (50) 8 0) (5,000) 6 6 (05) 6 (0) 66 (5) 67 (0) 69 (5) 70 (0) NOTE: ine pull is infinitely variable. 80) (9,500) 5 (75) (85) (95) 6 6 (05) NOTE: ine pull is infinitely variable. Drum Capacities - Wire Rope Front or Rear Grooved Drum 6 mm Wire Rope* Auxiliary Drum 6 mm Wire Rope* Auxiliary Drum ( ) Wire Rope* oist Drum, mm (7/8") Wire Rope 56 m (,77 ft) 7 ayers 0 m (, ft) 6 ayers 07 m (,5 ft) 6 ayers m (,060 ft) 6 ayers *5 m (7') is deducted from maximum spooling capacities for dead wraps per drum or lagging. Maximum ength No agging With agging m (,5 ft) 6 ayers 5 m (,8 ft) 6 ayers Working Weight Configuration, m (70') No. 8 76, m (50') No. 8 combined with, m (80') No. Fixed Jib 6,0 m (00') No. 8 combined with 5,8 m (70') No. 5 uffing Jib kg (lb) Series Series Series 6 08 (55,) 77 97* (9,6)* 96 9 (,) 0 06 (6,08) 6 07** (76,6)** 9 8 (505,6) 0 (5,08) 8 7 (58,5) Typical working weight includes optional self-assembly carbody jacks, hydraulic reservoir full, fuel half-full, drums with standard lengths of wire rope, upper boom point, 7 mt (50 t) hook block, and,6 mt (5 t) hook and weight ball. Note: Upper boom point not used with fixed jib or luffing jib. *8,8 m (60') No. 8 boom maximum allowed. **57,9 m (90') No. 8 boom maximum allowed.

31 performance data Maximum ength Unassisted Raising Over end of blocked crawlers or side of crawlers m (ft) No. 8 or No. E Main - or - No. Fixed Jib on No. 8 or No. E Main Series Main 88, (90) 85, (80) 8, 79, (60) 76, (50) Fixed Jib 9, (0) 8, (60), NOTE: oad block(s), hook(s) and weight ball(s) on ground at start. Upper boom point cannot be used on 88, m (90') boom, or when jib is attached. lengths of 76, m (50') through 88, m (90') require only two middle sheaves in lower boom point, all others must be removed from lower boom point. Maximum ength Unassisted Raising Over end of blocked crawlers m (ft) No. 9 uffing Jib on No. 8 Main Series ayout Jack-Knife Method Main, 7, 0,5 (00),5 (0) (0) 9,6 (0),7 (0) 5,7 (50) uffing Jib** 5,8-7, (70-0) 8,8-7, (60-0),7-7, (0-0) 9,6-7, (0-0) - 7, (0-0) 0,5-7, (00-0) 7, - 7, (90-0), - 7, (70-0) Main, 7, 0,5 (00),5 (0) (0) 9,6 (0),7 (0) 5,7 (50) uffing Jib*** 5,9-7, (80-0) 5,8-7, (70-0) 8,8-7, (60-0),7-7, (0-0) 9,6-7, (0-0) - 7, (0-0) 0,5-7, (00-0), - 7, (80-0) 8,8 (60), - 7, (70-0) 8,8 (60), - 7, (70-0) 5,8, - 7, (70-0) 5,8, - 7, (70-0) Maximum ength Unassisted Raising Over end of blocked crawlers m (ft) No. Fixed Jib on No. 9 uffing Jib on No. 8 Main Series ayout Jack-Knife Method Main 57,9* * 6,0* * uffing Jib# 6,0-6,0 (00-0) 5,8 Fixed Jib 9, -, (0-80) 9, -, (0-80) 5,9 57,9# # 6,0* *, - 6,0 (70-0), - 5,9 (70-80), - 9,6 (70-0) 5,9 57,9# # 6,0* *, - 70, (70-0), - 57,9 (70-90), - 5,8 (70-70) NOTE: oad block(s), hook(s) and weight ball(s) on ground at start. #Requires only two middle sheaves in lower boom point, all others must be removed from lower boom point. *Requires lower boom point to be removed. **With intermediate fall. ***Without intermediate fall. NOTE: oad block(s), hook(s) and weight ball(s) on ground at start. #Without intermediate fall. *Requires lower boom point to be removed.

32 performance data Maximum ength Unassisted Raising No. 8 Fixed Jib on No. 5 uffing Jib on No. 8 or No. E Main Series Main Fixed Jib ayout Jack-Knife Method uffing Jib Fold Under Jack-Knife Method uffing Jib Over end of blocked crawlers m (ft) 8,8 (60) 5,8 5,9 9, - 8, (0-60) 9, - 8, (0-60) 9, - 8, (0-60),7-5,8 (0-70),7-5,8 (0-70),7-5,8 (0-70),7 (0),7-5,7 (0-50),7-8,8 (0-60) 57,9# # 9, - 8, (0-60),7-5,8 (0-70),7-5,8 (0-70) 6,0* * 9, - 8, (0-60),7-5,8 (0-70),7-5,8 (0-70) NOTE: oad block(s), hook(s) and weight ball(s) on ground at start. #Requires only two middle sheaves in lower boom point, all others must be removed from lower boom point. *ower boom point must be removed. Maximum ength Unassisted Raising Over end of blocked crawlers m (ft) No. 5 uffing Jib on No. 8 or No. E Main Series ayout Inline Method Main uffing Jib,, 7, 0,5 (00),5 (0) (0) 9,6 (0),7 (0) 5,7 (50) 8,8 (60) 5,8, - 5,8 (70-70), - 5,8 (70-70), - 5,8 (70-70), - 5,8 (70-70), - 5,8 (70-70), - 5,8 (70-70), - 8,8 (70-60), - 5,7 (70-50), - (70-0), - 0,5 (70-00), -, (70-80) ayout Jack-Knife Method Main uffing Jib 9,6 (0),7 (0) 5,7 (50) 8,8 (60) 5,8 5,9 57,9# # 6,0* * 5,8 8,8-5,8 (60-70) 9,6-5,8 (0-70),5-5,8 (0-70) 7, - 5,8 (90-70), - 5,8 (70-70), - 5,8 (70-70), - 5,8 (70-70) NOTE: oad block(s), hook(s) and weight ball(s) on ground at start. #Requires only two middle sheaves in lower boom point, all others must be removed from lower boom point. *ower boom point must be removed. Fold Under Jack-Knife Method Main uffing Jib 7, 0,5 (00),5 (0) (0) 9,6 (0),7 (0) 5,7 (50) 8,8 (60) 5,8 5,9 57,9# # 6,0* *,, -, (70-80), - 7, (70-90), - 0,5 (70-00), -,5 (70-0), - (70-0), - 9,6 (70-0), -,7 (70-0), - 5,7 (70-50), - 8,8 (70-60), - 5,8 (70-70), - 5,8 (70-70)

33 performance data Maximum ength Unassisted Raising Over end of blocked crawlers m (ft) No. 8R - or - No. Fixed Jib on No. 8R Series Main 0,6 (0) 9, (00) Fixed Jib, NOTE: oad block(s), hook(s) and weight ball(s) on ground at start. Upper boom point cannot be used when jib is attached. Upper boom point cannot be used on 0,6 m (0') boom. Maximum ength Unassisted Raising Over end of blocked crawlers m (ft) No. 8R - or - No. Fixed Jib on No. 8R Series Main 0,6 (0) 9, (00) Fixed Jib 8, (60) NOTE: oad block(s), hook(s) and weight ball(s) on ground at start. Upper boom point cannot be used when jib is attached. Upper boom point cannot be used on 0,6 m (0') boom. Maximum ength Unassisted Raising Over end of blocked crawlers m (ft) No.E with Ight Tapered Top - or - No. Fixed Jib on No.E with ight Tapered Top Series Main 9 (0) 9, (00) 88, (90) Fixed Jib 9, (0) 8, (60) NOTE: oad block(s), hook(s) and weight ball(s) on ground at start. Upper boom point cannot be used when jib is attached. Upper boom point cannot be used on 9 m (0') boom. Maximum ength Unassisted Raising Over end of blocked crawlers m (ft) No.E with Open Throat Top - or - No. Fixed Jib on No.E with Open Throat Top Series Main 88, (90) 85, (80) 8, 79, (60) Fixed Jib 9, (0) 8, (60) NOTE: oad block(s), hook(s) and weight ball(s) on ground at start. Upper boom point cannot be used when jib is attached. Upper boom point cannot be used on 88, m (90') boom. Main Attachments Main (with Top) Fixed Jib uffing Jib Fixed Jib (Extension) No. 8* (eavy-ift) No. 8R* (ong-reach Top) No. E (eavy-ift) No. E (Open Throat Top) No. E (ight Tapered Top) No. No. No. No. No. No. No. 9* No. 5 No. 5 No. No. 8 No. 8 *Use straps and FACT TM connections. All others use pendants and pinned connections.

34 boom combinations No. 8 or No. E Combinations ength,, 7, 0,5 (00),5 (0) (0) 9,6 (0),7 (0) Inserts 6, m (0 ft),0 m (0 ft), m (0 ft) No. Fixed Jib Combinations Jib ength 9, (0), (0) 5, (50) 8, (60),, Fixed Jib Inserts,0 m (0 ft) 6, m (0 ft) Note: Can be used as fixed jib extension for No. 9 luffing jib. 5,7 (50) 8,8 (60) 5,8,6 m (5 ft) No. Jib Top 5,9 57,9 6,0 6,0 (0) 67, (0) 70, (0) 7, (0), m (0 ft) No. 8 Top No. Fixed Jib, m (80 ft) 6, m (0 ft) No. Jib Inserts,0 m (0 ft) No. Jib Insert,6 m (5 ft) No. Jib Butt 76, (50) 79, (60) 8, 5, m (0 ft) No. 8 Insert, m (0 ft) No. 8 Top 85, (80) 5 88, (90) 5, m (0 ft) No. 8 Insert, m (0 ft) No. 8 Insert, m (0 ft) No. 8 Insert, m (0 ft) No. 8 Insert No. 8 88, m (90 ft), m (0 ft) No. 8 Insert No m (50 ft), m (0 ft) No. 8 Insert Model 999 Series No. 8 or E 88, m (90 ft), m (0 ft) No. 8 Insert 6, m (0 ft) No. 8 Insert 9, m (0 ft) No. 8 Butt Model 999 Series No. Fixed Jib on No. 8 or E 00,6 m (0 ft), m (0 ft) No. 8 Insert 6, m (0 ft) No. 8 Insert 9, m (0 ft) No. 8 Butt

35 boom combinations No. 8R Combinations ength (0) 9,6 (0),7 (0) 5,7 (50) 8,8 (60) 5,8 5,9 57,9 6,0 6,0 (0) 67, (0) 70, (0) 7, (0) 76, (50) 79, (60) 8, 85, (80) 88, (90) 9, (00) 9 (0) 97,5 (0) 00,6 (0) 0,6 (0) *ight weight insert Inserts 6, m (0 ft),0 m (0 ft), m (0 ft) , m* (0 ft)* No. Fixed Jib Combinations Jib ength 9, (0), (0) 5, (50) 8, (60) 5, m (50 ft) No. 8 ong-reach Top, m (0 ft) No. 8 ight Weight Insert, m (0 ft) No. 8 Insert, m (0 ft) No. 8 Insert Fixed Jib Inserts,0 m (0 ft) 6, m (0 ft) Note: No. Fixed Jib can also be used with No. E with Open Throat Top or ight Tapered Top. No. Fixed Jib, m (80 ft),6 m (5 ft) No. Jib Top,0 m (0 ft) No. Jib Insert,6 m (5 ft) No. Jib Butt 6, m (0 ft) No. Jib Inserts 5, m (50 ft) No. 8 ong-reach Top, m (0 ft) No. 8 Insert, m (0 ft) No. 8 Insert No. Fixed Jib 8, m (60 ft),6 m (5 ft) No. Jib Top 6, m (0 ft) No. Jib Insert,0 m (0 ft) No. Jib Insert,6 m (5 ft) No. Jib Butt 5, m (0 ft) No. 8 Insert, m (0 ft) No. 8 Insert No. 8R 0,6 m (0 ft), m (0 ft) No. 8 Insert No. 8R 9, m (00 ft), m (0 ft) No. 8 Insert, m (0 ft) No. 8 Insert 6, m (0 ft) No. 8 Insert 9, m (0 ft) No. 8 Butt, m (0 ft) No. 8 Insert 6, m (0 ft) No. 8 Insert 9, m (0 ft) No. 8 Butt Model 999 Series No. 8R 0,6 m (0 ft) Model 999 Series No. Fixed Jib on No. 8R 5,8 m (80 ft) Model 999 Series No. Fixed Jib on No. 8R 09,7 m (60 ft)

36 boom combinations 6 No. E with Open Throat Top Combinations ength Inserts 6, m (0 ft),0 m (0 ft), m (0 ft) No. Fixed Jib Combinations Jib ength Fixed Jib Inserts,0 m (0 ft) 6, m (0 ft), 9, (0),, (0) 7, 5, (50) 0,5 (00) 8, (60),5 (0) (0) Note: No. Fixed Jib can also be used with No. 8R. 9,6 (0),7 (0) 5,7 (50) 8,8 (60) 5,8 5,9 57,9 6,0 6,0 (0) 67, (0) 70, (0), m (0 ft) No. C Open Throat Top No. Fixed Jib 8, m (60 ft),6 m (5 ft) No. Jib Top 6, m (0 ft) No. Jib Insert,0 m (0 ft) No. Jib Insert,6 m (5 ft) No. Jib Butt 7, (0) 76, (50) 79, (60), m (0 ft) No. E Insert, m (0 ft) No. C Open Throat Top 8, 5 85, (80) 88, (90) 5 5, m (0 ft) No. E Insert, m (0 ft) No. E Insert No. E with Open Throat Top 88, m (90 ft), m (0 ft) No. E Insert, m (0 ft) No. E Insert, m (0 ft) No. E Insert No. E with Open Throat Top 79, m (60 ft), m (0 ft) No. E Insert, m (0 ft) No. E Insert 6, m (0 ft) No. E Insert 9, m (0 ft) No. E Butt, m (0 ft) No. E Insert 6, m (0 ft) No. E Insert,0 m (0 ft) No. E Insert 9, m (0 ft) No. E Butt Model 999 Series No. E with Open Throat Top 88, m (90 ft) Model 999 Series No. Fixed Jib on No. E with Open Throat Top 97,5 m (0 ft)

37 boom combinations No. E with ight Tapered Top & Tapered Insert Combinations ength Inserts 6, m (0 ft),0 m (0 ft), m (0 ft) 7 (0) 9,6 (0),7 (0) 5,7 (50) 8,8 (60) 5,8 5,9 57,9,6 m (5 ft) No. Jib Top 6,0 6,0 (0) 67, (0) 70, (0) 7, (0) No. Fixed Jib 8, m (60 ft) 6, m (0 ft) No. Jib Insert,0 m (0 ft) No. Jib Insert,6 m (5 ft) No. Jib Butt 76, (50) 79, (60) 8, 85, (80) 88, (90) 9, (00) 9 (0) 5 5, m (50 ft) No. E ight Tapered Top 9, m (0 ft) No. E Tapered Insert, m (0 ft) No. E Insert 5, m (50 ft) No. E ight Tapered Top 9, m (0 ft) No. E Tapered Insert, m (0 ft) No. E Insert, m (0 ft) No. E Insert, m (0 ft) No. E Insert No. E with ight Tapered Top 9 m (0 ft), m (0 ft) No. E Insert No. E with ight Tapered Top 88, m (90 ft), m (0 ft) No. E Insert, m (0 ft) No. E Insert 9, m (0 ft) No. E Butt Model 999 Series No. E with Ight Tapered Top 9, m (0 ft), m (0 ft) No. E Insert, m (0 ft) No. E Insert 6, m (0 ft) No. E Insert 9, m (0 ft) No. E Butt Model 999 Series No. Fixed Jib on No. E with ight Tapered Top 06,7 m (50 ft)

38 boom combinations 8 No. 5 uffing Jib Combinations Jib ength, uffing Jib Inserts,0 m 6, m, m (0 ft) (0 ft) (0 ft) No. 8 Fixed Jib 8, m (60 ft),6 m (5 ft) No. 8 Jib Top,0 m (0 ft) No. 8 Jib Insert, 7,,6 m (5 ft) No. 8 Jib Butt 0,5 (00),5 (0) 7,0 m ( ft) No. 5 Jib Top 7,0 m ( ft) No. 5 Jib Top (0) 9,6 (0),7 (0) 5,7 (50) No. 5 uffing Jib 5,8 m (70 ft), m (0 ft) No. 5 Jib Insert, m (0 ft) No. 5 Jib Insert 8,8 (60) 5,8 No. 8 Fixed Jib Combinations 0 0, m (0 ft) No. 5 Jib Insert No. 5 uffing Jib 5,8 m (70 ft), m (0 ft) No. 5 Jib Insert Jib ength Fixed Jib Inserts,0 m (0 ft), m (0 ft) No. 5 Jib Insert, m (0 ft) No. 5 Jib Insert 9, (0), (0) 5, (50) 8, m (7 ft) No. 5 Jib Butt 8, m (7 ft) No. 5 Jib Butt 8, (60), m (0 ft) No. 8 Top, m (0 ft) No. 8 Top, m (0 ft) No. 8 Insert, m (0 ft) No. 8 Insert No. 8 6,0 m (00 ft) No. 8 6,0 m (00 ft), m (0 ft) No. 8 Insert, m (0 ft) No. 8 Insert, m (0 ft) No. 8 Insert,0 m (0 ft) No. 8 Insert 9, m (0 ft) No. 8 Butt, m (0 ft) No. 8 Insert,0 m (0 ft) No. 8 Insert 9, m (0 ft) No. 8 Butt Model 999 Series No. 5 uffing Jib on No. 8 or No. E,8 m (70 ft) Model 999 Series No. 8 Fixed Jib on No. 5 uffing Jib on No. 8 or No. E, m (0 ft)

39 boom combinations No. 9 uffing Jib Combinations Jib ength,, 7, 0,5 (00) uffing Jib Inserts,0 m 6, m, m (0 ft) (0 ft) (0 ft) 7,6 m (5 ft) No. 9 Jib Top No. Fixed Jib, m (80 ft),6 m (5 ft) No. Jib Top,6 m (5 ft) No. Jib Butt 6, m (0 ft) No. Jib Inserts,0 m (0 ft) No. Jib Insert 9,5 (0) (0) 9,6 (0),7 (0) 5,7 (50) 8,8 (60) 5,8 5,9 57,9 No. 9 uffing Jib 7, m (0 ft), m (0 ft) No. 9 Jib Insert, m (0 ft) No. 9 Jib Insert 6, m (0 ft) No. 9 Intermediate Fall Insert 7,6 m (5 ft) No. 9 Jib Top, m (0 ft) No. 9 Jib Insert, m (0 ft) No. 9 Jib Insert 6,0 6,0 (0) 67, (0) 70, (0), m (0 ft) No. 9 Jib Insert No. 9 uffing Jib 6,0m (0 ft), m (0 ft) No. 9 Jib Insert 7, (0) Note: Optional 6, m (0') insert with intermediate fall available for No. 9 luffing jib., m (0 ft) No. 9 Jib Insert, m (0 ft) No. 9 Jib Insert,0 m (0 ft) No. 9 Jib Insert 7,6 m (5 ft) No. 9 Jib Butt 7,6 m (5 ft) No. 9 Jib Butt, m (0 ft) No. 8 Top, m (0 ft) No. 8 Top No. 8 5,9 m (80 ft), m (0 ft) No. 8 Insert, m (0 ft) No. 8 Insert Model 999 Series No. 9 uffing Jib on No. 8 8,0 m (0 ft), m (0 ft) No. 8 Insert 6, m (0 ft) No. 8 Insert,0 m (0 ft) No. 8 Insert 9, m (0 ft) No. 8 Butt No. 8 57,9 m (90 ft), m (0 ft) No. 8 Insert, m (0 ft) No. 8 Insert 9, m (0 ft) No. 8 Butt Model 999 Series No. Fixed Jib on No. 9 uffing Jib on No. 8 6, m (80 ft)

40 heavy-lift boom range diagram 0 No. 8 or No. E Main

41 heavy-lift boom load chart iftcrane Capacities - Series No. 8 or No. E kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x 000, 7,,5 (0) 9,6 (0) 5,7 (50) 5,8 57,9 6,0 (0) 70, (0) 76, (50) 8, 88, (90),6 (5) 5,0 (7) 6,0 (0) 8,0 (6) 0,0 () 50,0* (55.0)* 9,9 (6.5) 8,0 (97.5) (09.),5 (5.) 80,7 (96.) 8,5 (08.), (5.) 8, (07.5) 0,8 (50.5), (95.0) 0,5 (9.9) 0, (65.5) 0,6 (8.9) 00,8 (.) 88,6 (96.8) Fixed Jib No. on eavy-ift No. 8 or No. E Jib ength 9, (0), (0) Deduct from Capacity when fixed jib is attached kg (lb) 0 (,700) 590 (,500),0 (6),0 (0) 00, (.8) 88, (90.) 00, (.0) 88, (90.) 00, (.) 88, (90.) 00, (.9) 88, (90.) 99,9 (.0) 88, (90.0) 97,6 (5.7) 88, (89.7) 86, (90.5) 8, (77.0) 76,7 (69.) 7,9 (6.5) 6, (9.) 6,8 (8.) 5,8 (.) (95.) 5, (50) 8, (60), 950 (,00) 0 (5,00) 770 (6,00),0 (6) 70,9 (56.) 70,9 (56.) 70,9 (56.) 70,9 (56.0) 70,6 (55.5) 70,5 (55.) 70, (5.6) 67,9 (9.6) 6, (7.) 5, (.0),6 (9.) 5, (77.9), 0 (7,00) 5,0 (50) 6, (9.0) 6, (9.0) 6, (8.9) 6, (8.8) 6, (8.) 6,9 (7.9) 6,6 (7.) 6,6 (6.7) 60,7 (.5) 50,9 (.), (9.) 5,0 (77.) 8,0 (60) 50, (08.) 50, (08.) 50,0 (08.0) 9,9 (07.8) 9,6 (07.) 9,5 (06.8) 9, (06.) 8,9 (05.5) 8,6 (0.7) 8, (0.7),5 (9.), (75.5),0,6 (7.6),6 (7.5),5 (7.), (7.7),0 (7.),6 (70.), (69.8),9 (68.9),9 (68.9),5 (68.0), (67.) 0,0 (00), (5.7), (5.5), (5.9),8 (5.),5 (50.6), (9.9),7 (9.0),7 (8.9), (8.0),9 (7.),0 (0) (.6) 0, (5.6) 9,9 (5.0) 9,7 (.) 9, (.6) (.9) 8,6 (.0) 8,6 (.0) 8, (.0) 7,7 (0.) 6,0 (0) 8,5 (9.8) 8, (9.) 8,0 (8.7) 7,6 (7.9) 7, (7.) 6,9 (6.) 6,8 (6.) 6, (5.) 6,0 (.5) 0,0 (0) (0.9) 5, (.5) 5, (.0),8 (.), (.),0 (.6),0 (.5),5 (0.5), (9.7),0 (0),9 (9.),9 (9.9),5 (9.), (8.),8 (7.5),8 (7.), (6.5),0 (5.6) 6,0 (50) (.),7 (6.),5 (5.7), (.9) 0,7 (.0) 0,7 (.0) 0, (.0) 9,8 (.) 50,0 (60) 8,7 (.) 9,7 (.6) 9, (.9) (.0) 8,9 (0.9) 8,5 8, (9.) 5,0 ( 70) 8,5 (9.) 8,6 (9.) 8, (8.) 8, (8.) 7,8 (7.) 7, (6.5) 58,0 6,0 (0) 70,0 ( 0) *NOTE: Special equipment required. 5,8 (.0) 6, (.6), (7.6) 6, (.9), (9.),8 (.) 5,8 (.9),9 (8.8),9 (.) 5, (.),8 (8.5),8 (.0) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

42 long-reach top range diagram No. 8 ong-reach

43 long-reach top load chart iftcrane Capacities - Series No. 8R kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x 000 (0),7 (0) 8,8 (60) 5,9 6,0 67, (0) 7, (0) 79, (60) 85, (80) 9, (00) 97,5 (0) 0,6 (0) 7, () 0, (65.5) (8) 0,0 (0) 0, (5.) 0,0 (0.) 8,7 (65.5), (60.7) 06,8 (6.0) Fixed Jib No. on No. 8 ong Reach Top on No. 8,0 (),0 (0),0 (6) 5,0 (50) 6,0 (55) 8,0 (60) 9,9 (9.) 88, (9.0) 7,0 (60.8) 66,5 (.7) 6,0 (6.6) 5, (.9) 0,0 (8.9) 90, (95.0) 7,0 (60.7) 66, (.5) 60,9 (6.) 5, (.6) 0,6 (.8) 90, (9.5) 7,8 (60.) 66, (.0) 60,7 (5.8) 5,8 (.0) 9, (06.) 89,5 (9.) 7,5 (59.7) 66,0 (.5) 60, (5.) 5,6 (.5) 79,7 (75.) 7, (59.) 65,7 (.9) 60, (.6) 5, (0.8) (5.5) 68, (50.7) 65,8 (.) 59,8 (.9) 5,0 (0.) 56,5 (.6) 56, (.6) 55,7 (.) 5,0 (09.) 7,0 (0.7) 6,7 (0.8) 6, (0.7) 5,7 (00.6) (85.6) 8,6 (8.7) 8,0 (8.7) (7.6), (70.7) (65.) 9, (6.6) (55.7) Jib ength 9, (0), (0) 5, (50) 8, (60),, Deduct from Capacity when fixed jib is attached kg (lb) 0 (,700) 590 (,500) 950 (,00) 0 (5,00) 770 (6,00) 0 (7,00),0,0 0,0 (00) 6,0 (0) 0, (9.) 5,8 (77.5) 6,7 (57.8) 9,9 (.7) 0,0 (9.0) 5,7 (77.) 6,6 (57.5) 0,8 (.9) 9,7 (9.) 5, (76.6) 6, (56.9) 0,5 (.) 9,5 (90.8) 5, (76.0) 6,0 (56.) 0, (.7) 9, (90.0),8 (75.) 5,7 (55.5) 9,9 (.9) 8,8 (89.) (7.5) 5, (5.7) 9,5 (.) 8, (88.5), (7.7),9 (5.9) 9, (.) 8, (87.8),8 (7.9),6 (5.) 8,7 (0.) (8.8),6 (7.0), (5.) 8, (9.5),0 (68.9) 0,5 (67.),8 (5.) 7,9 (8.6) 8, (6.) 6,5 (57.9),7 (9.5) 7,7 (8.) (5.), (5.0),0 (5.8) 7, (7.) Fixed Jib No. on No. 8 ong Reach Top on No. 8 Jib ength Deduct from Capacity when fixed jib is attached kg (lb),0 (0) 8,0 (55) 5,0 (75) 5,8 (.0) 6, (5.5) (8.9) 6, (.9), (9.9) (.5) 5,8 (.),8 (9.) 0,5 (.8) 5,5 (.),5 (8.) 0, (.) 5, (.5), (7.5) 9,8 (.),7 (.6),7 (6.6) 9, (.), (0.7), (5.7) (0.),9 (9.8) 0,9 (.8) 8,6 (9.6),6 (9.) 0,6 (.) 8, (9.0), (8.) 0, (.) 7,9 (8.0) 9, (0), (0) 5, (50) 8, (60) 0 (,500) 0 (,00) 680 (,700) 000 (,00) 60,0 (95) (7.) 8, (8.9) 8,0 (8.) 7,6 (7.) 7, (6.) 6,8 (5.) 6,5 (.8) 6, (.9) 6,0 (5) 6, (.6) 6,8 (.7) 6,6 (.9) 6, (.0) 5,8 (.) 5,5 (.5) 5, (0.6) 68,0 (5) 5, (.) 5, (.6) 5, (.),9 (0.6),6, (9.) 7,0 (0) 76,0 (55) 78,0 (60), (8.),7 (.8), (8.),9 (5.), (.),9 (8.0),8 (5.), (.),8 (8.),9 (5.5), (.7), (7.),6 (5.0), (.) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

44 open throat top boom range diagram No. E Main with Open Throat Top

45 open throat top load chart iftcrane Capacities - Series No. E with Open Throat Top kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x 000 5, 7,,5 (0) 9,6 (0) 5,7 (50) 5,8 57,9 6,0 (0) 70, (0) 76, (50) 8, 88, (90),6 (5) 5,5 (8) 6,0 (0) 8,0 (6) 0,0 () 08,6 (60.0) 99,7 (.) 8, (00.0) 0, (.8),7 (5.7) 7, (78.0) 67, (66.9) 9,6 (0.8), (5.7),8 (98.),8 (5.7),5 (70.9),0 (5.0) 08,8 (0.5) 0,6 (6.0) 9,0 (0.5) 8,5 (8.0) Fixed Jib No. on No. C Open Throat Top on No. E Jib ength 9, (0), (0) Deduct from Capacity when fixed jib is attached kg (lb) 0 (,500) 0 (,00),0 (0) 5,0 (50) 88, (90.8) 6,9 (0.) 88, (90.6) 6,7 (9.7) 88, (90.) 6 (9.) 88, (90.0) 6, (8.9) 88,0 (89.) 6,0 (8.) 86, (88.8) 6,8 (7.6) 77, (69.7) 6, (6.8) 69,5 (5.6) 6, (6.) 60,9 (.) 57, (5.) (0.9) 9,5 (09.0), (90.8), (75.) 5, (50) 8, (60) 680 (,700) 000 (,00) 8,0 (60) 50,7 (09.6) 50,5 (09.) 50, (08.7) 50, (08.) 9,8 (07.5) 9,5 (06.9) 9, (06.0) 8,8 (05.) 8,7 (0.) 6,8 (0.5) 0, (88.9), (7.6),0 (75.8) 8,6 (88.8) 8, (88.) 8, (87.8) 7,8 (87.0) 7,5 (86.) 7, (85.5) 6,7 (8.7) 6, (8.8) 6,0 (8.) 5,8 (8.), (7.9),0, (7.), (7.6),9 (7.),5 (7.), (7.7),8 (70.8), (70.0),0 (69.),7 (68.), (67.) 0,6 (66.5) 8,0 (57.) 7,5 (6.6) 7, (6.) 7,0 (6.) 6,7 (60.7) 6, (59.8) 5,9 (59.0) 5,5 (58.) 5, (57.),7 (56.), (55.5) 0,0 (00) 5,0 (5.0),9 (5.7) (5.8), (5.),7 (5.), (50.),9 (9.5),6 (8.7), (7.7),7 (6.8),0 (0) (.7) 0,7 (6.8) 0, (6.0) 0, (5.) 9,7 (.) 9, (.6) 8,8 (.6) 8,5 (.8) 8,0 (0.8) 7,6 (9.9) 6,0 (0) (.) 8,7 (0.) 8, (9.7) 8,0 (8.7) 7,6 (7.9) 7, (7.0) 6,8 (6.) 6, (5.) 6,0 (.) 0,0 (0) (.) 5,9 (5.6) 5,6 (5.0) 5, (.0),8 (.), (.),0 (.5),5 (0.5), (9.6),0 (0) (0.6), (.0),0 (0.),6 (9.), (8.),8 (7.5), (6.5),9 (5.6) 6,0 (50), (7.5),9 (6.6),6 (5.9), (.9) 0,7 (.) 0, (.) 9,9 (.) 50,0 (60) 9, (.7) 0, (.7) 9,8 (.9) 9, (.9) (.) 8,6 (0.) 8, (9.) 5,0 (0.) 9, (0.) 8,6 (9.) 8, (8.5) 7,8 (7.5) 7, (6.6) 58,0 6,0 (0) 68,0 ( 5) 70.0 (0) 6, (.) 6,5 (.5),9 (8.7), (.) 6, (.), (9.),7 (5.6),0 (.) 5,9 (.),0 (8.9),6 (5.),0 (.) 5,5 (.),9 (8.6),5 (5.),8 (.) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

46 light tapered top range diagram 6 No. E Main with ight Tapered Top

47 light tapered top load chart iftcrane Capacities - Series No. E with ight Tapered Top kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x 000 7, () 8,0 (8) (0),5 (0) 0, (65.5) 9,9 (56.) 0,7 (9.6) 9,6 (0) 9,8 (5.9) 0,0 (8.0) 5,7 (50) 0, (7.) 5,8 57,9 6,0 (0) 70, (0) 76, (50) 79, (60) 8, 88, (90) 9 (0) Fixed Jib No. on ight Tapered Top No. E 7 0,0 (),0 (0) 97,0 (0.) 7, (60.0) 97,0 (0.) 7,0 (59.6) 97, (0.6) 7,7 (59.0) 90,8 (98.) 7, (58.) 7,7 (57.8) 69,5 (5.5) Jib ength 9, (0) Deduct from Capacity when fixed jib is attached kg (lb) 0 (,500),0 (6) 5,0 (50) 59,9 (.8) 5 (7.7) 59,6 (.) 5, (7.) 59, (0.6) 5,9 (6.) 5 5,6 (5.7) 58,7 (9.) 5, (5.0) 58, (8.6) 5,0 (.) 58,0 (7.8) 5,6 (.) 9, (08.9) 9, (08.) 5, (00.0) 5,0 (99.), (90.9), (0) 5, (50) 8, (60) 0 (,00) 680 (,700) 000 (,00) 8,0 (60),6 (9.), (9.5),0 (90.8),7 (90.), (89.),0 (88.6) 0,6 (87.7) 0, (87.0) 0,5 (86.5) 9, (86.),8 (7.) 8, (6.),0,7 (75.), (7.5),0 (7.7),7 (7.0), (7.),0 (7.) 0,6 (70.5) 0, (69.7) 0,0 (69.) 9,8 (68.9) 9,5 (68.0) 6, (58.),0 9, (6.) 8,8 (6.) 8, (6.5) 8, (60.8) 7,7 (59.9) 7, (59.) 7,0 (58.) 6,6 (57.) 6, (57.0) 6, (56.5) 5,8 (55.6) 5,0 (5.7) 8,0,8 (5.0), (5.),0 (5.),7 (5.6), (50.7),9 (9.9),5 (9.0), (8.) 0,9 (7.7) 0,7 (7.) 0, (6.) 9,9 (5.),0 (00) 9,8 (6.8) 9,5 (6.0) (5.) 8,8 (.5) 8, (.5) 8,0 (.7) 7,6 (.8) 7, (.0) 7,0 (0.6) 6,7 (0.) 6, (9.) 5,9 (8.) 6,0 (0) 6, (5.5) 6, (.7) 5,8 (.) 5, (.) 5,0 (.) (.), (0.6),0 (0.),7 (9.6), (8.7),9 (7.7),0 (0),7 (7.), (6.8),0 (5.9),6 (5.0), (.) 0,8 (.) 0,6 (.8) 0, (.) 0,0 (.) 9,5 (0.) 8,0 (60) 9,9 (.) 9,5 (0.5) 9, (9.7) 8,7 (8.8) 8, (8.0) 8, (7.5) 7,9 (7.0) 7,5 (6.) 7,0 (5.0) 5,0 8, (6.) 7,8 (5.6) 7, (.7) 7, (.9) 6,8 (.) 6,6 (.9) 6, (.0) 5,7 (0.9) 56,0 7, 6,7 (.) 6, (.) 6,0 (0.6) 5,7 (0.) 5,5 (9.6) 5, (8.7),6 (7.7) 60,0 (0) 5,8 5, 5,0 (9.),8 (8.8) (8.), (7.),6 (6.) 6,0 (0) (8.7), (8.0),9 (7.5),7 (7.0), (6.),8 (5.) 70,0 (0), (6.8),9 (6.),6 (5.8), (5.0) 7,0 (0) 76,0 (50),5 (5.8), (5.),9 (.),0 (.8) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

48 fixed jib range diagram 8 No. Fixed Jib on No. 8 or No. E Main

49 fixed jib load chart iftcrane Capacities Fixed Jib No. with 80 mm (' 6") strut on No. 8 or No. E kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Offset 5 Offset 9, (0) 7, 6,7 (59.0) 9,6 (0) 5,9 70, (0) 8, 7, 9,6 (0) 5,9 70, (0) 8, 9,0 (0) 6,7 (59.0) 6,7 (59.0) (8.9) 6,0 (50) 6,7 (59.0) 6,7 (59.0) 6,7 (59.0) 6,7 (59.0) 9, (.8), (7.8) Jib ength 9, m (0 ft),0 8,0 6,0 (0) 8,0 (50) 56,0 6,0 (0) 5, (56.),8 (5.) 6,6 (59.0) 5, (56.) 9, (.7) (8.5) 6,7 (59.0) 6, (59.0) 8, (9.6), (7.) 8, (9.) 6,7 (59.0) 6,0 (58.7) 7, (7.) 0, (5.0) 7, (7.0),9 (0.9) 5, (56.0), (5.) 6,7 (6.0) 9,6 (.7) 6,7 (5.7) (0.) 6, (6.7), (.) 8, (.) 6, (6.), (.6) 0, (5.0) 8, (0.) 6, (5.),6 (8.), (7.9) 9,5 (.5) 7,5 (8.5) 0,7 (6.0) 7,6 (7.7), (9.7) 0, (5.5) 7,6 (7.7) 0, (.9) 7, (6.6),8 (0.7) 7,0 (0), (.) 80,0 5 Offset 5 Offset 7, 9,6 (0) 5,9 70, (0) 79, (60) 7, 9,6 (0) 5,9 70, (0) 79, (60) 9, (0),0 (0) 8,9 (.6) (.) 6,0 (50) 7,5 (9.) 8,5 (.) 9, (.) (.0) Jib ength 5, m (50 ft),0 8,0 6,0 (0) 8,0 (50) 56,0 6,0 (0) 7,0 (0) 80,0 5,9 (5.6),7 (.8), (6.8) 7,0 (8.0) 5,9 (5.),6 (.),7 (7.) 8,0 (0.) 6,9 (7.7) 5,7 (.6),8 (8.) 8,8 (0.) 5,8 (.0) 8,7 (.7) 7,8 (9.5) 6,6 (6.6) 0,7 (5.9) 7,7 (7.9) 5,5 (.), (6.) 9, (.5) 8, (0.) 7, (7.5) 0, (5.) 7, (7.) 5, (.), (6.5),9 (6.8) 0, (.8), (9.5), (5.6) 9,9 (.6), (.9),6 (8.),0 (.) 9, (.) 8,7 (9.5),5 (0.),0 (6.) 0, (.) 8, (9.) 5,9 (.),9 (.), (7.) 0,8 (.5) 8,0 (8.5) 5,6 (.5),8 (7.8) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

50 fixed jib load chart 50 iftcrane Capacities Fixed Jib No. with 80 mm (' 6") strut on No. 8 or No. E kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Offset 5 Offset 9, (0) 7, 9,6 (0) 5,9 70, (0) 79, (60) 7, 9,6 (0) 5,9 70, (0) 79, (60),0 (0) 5,9 (5.0) (6.) Jib ength 8, m (60 ft) 6,0 (50),0 8,0 6,0 (0) 8,0 (50) 56,0 6,0 (0),8 (.), (0.), (7.) 0,8 (.) 5,6 (.8), (.), (9.6), (6.5) 0,0 (.) 8,5 (9.) 6, (6.) 5, (.7), (.7), (8.8),7 (6.5) (0.7) 6, (.) 5,7 (.9),9 (.),9 (0.6) 0,8 (6.) 7,8 (8.) 5,6 (.5) 6,0 (5.5) 5, (.8), (.5) 0, (5.) 7,5 (7.) 5, (.7) 0,8 (.) 9, (0.) 7,6 (6.6), (5.) 0, (.8) 8,6 (8.9) 7, (6.),5 (5.7), (.6) 9,6 (.) 8, (8.) 7, (6.5), (5.) 0, (.9) 8,9 (0.) 8, (8.) 6, (.7), (5.) 0,9 (.9) 9, (.) 8, (9.) 5,9 (.) 7,0 (0),5 (7.),5 (7.),0 (8.5) 80,0 5 Offset 5 Offset 7, 9,6 (0) 5,9 70, (0) 76, (50) 7, 9,6 (0) 5,9 70, (0) 76, (50) 9, (0),0 (0) (0.6) 6,0 (50) 9, (0.) 9, (0.6) 9, (0.8) Jib ength, m (80 ft),0 8,0 6,0 (0) 8,0 (50) 56,0 6,0 (0) 7,0 (0) 80,0 8,9 (9.7) 8, (8.) 7, (5.7) 6,0 (.7) 8,8 (9.6) 7,9 (7.) 6,8 (5.5) 6, (.9) 9, (0.) (9.9) 8,6 (9.0) 7,6 (7.) 7,0 (5.6) 6, (.) (9.) 9, (0.6) 9, (0.) 8,9 (9.7) 8, (8.5) 7,6 (7.) 5,8 (.0), (8.6),0 9, (0.6) 9, (0.) 8,9 (9.8) 8, (9.0) 7,8 (7.6) 5,7 (.6),0 (8.), 7,7 (7.) 7, (5.8) 5,9 (.9) (0.7) 7,9 (7.7) 7, (6.5) 6,7 (.6) 5, (.) (0.7) 7,7 (7.) 7, (5.8) 6,0 (.0) 5, (.),9 (.0) 7,9 (7.6) 7, (6.) 6,7 (5.) 6,0 (.6) 5,5 (.),7 7,9 (7.7) 7,5 (6.5) 6,9 (5.5) 6, (.) 5,7 (.7),6 (9.8),0 (5.) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

51 fixed jib range diagram No. Fixed Jib on No. 8R 5

52 fixed jib load chart 5 iftcrane Capacities Jib No. with 80 mm (' 6") strut on No. 8R kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Offset 0 Offset 0,7 (5) (0) 8, 5,8 67, (0) 8, 9, (00) (0) 5,8 67, (0) 8, 9, (00),0 (0) 8, 6,0 (60) 8, 8, 8, 8, 8, Jib ength 9, m (0 ft),0 8,0 (00) 6,0 (0) 8,0 (50) 56,0 68,0 (0) 8, 8, 8, 8, 8, 8,,5 (.) 0,6 (.) 8, 8, 8,,6 (0.) 9,7 (.) 6, (6.7) 8, 8, 8,,6 (8.0) 8,7 5,6 (.) 8, 8, 7,8 (8.8),0 (6.5) 8,0 (8.6) 5,0 (.0) 8, 6,7 (5.), (.7) 8, 8, 6,7 (6.5),7 (.) 8, 8, 8,,9 (0.9) 9,9 (.7) 8, 8, 8,,0 (8.9) (0.7) 5,8 (.9) 6,9 (7.) 6,6 (6.) 6, (5.), (7.6) 8, (9.) 5, (.6) 76,0 (0) (0.),8 (0.), (8.8) (0.6),7 (9.) 80,0,8 (5.0), (.),7 0 Offset 0 Offset (0) 5,8 67, (0) 8, 9, (00) (0) 5,8 67, (0) 8, 9, (00) 0,7 (5),6 6,0 (50),6,6,6,6,0,6,6,6,6,6,6,6,6,6 Jib ength, m (0 ft) 8,0 (00) 6,0 (0) 0,0 (60) 8,0 56,0 (0) 68,0 (0) 76,0 (60) 8,0 (80),6,6 (9.5),,6,6,6 (9.5), (.) 0,7,6,6,6 (7.),7 (0.) 9,8 (5.) 6,7 (.),,6,6,6 (5.),7 (8.) 8,8 (.) 5,7 (0.5), (7.), (.),6,6,6 (.8), (6.7) 8, (.7) 5, (9.0),6 (6.),6 (6.) 0,8 (.6) 0,,6, (5.9),6 (.0) 0,5,6,6 (8.7),9 (5.6),7 (.0) 0,,6,6,6 (6.), (9.0) 9, (.7) 6,0 (.0),,6,6,6 (5.),7 (7.7) 8,6 (.) 5, (9.7),8 (7.) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

53 fixed jib load chart iftcrane Capacities Jib No. with 80 mm (' 6") strut on No. 8R kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 5 60 Rating kg (lb) x Offset, (0) (0) 5,8 67, (0) 8, 9, (00) (0) 5,8 0 Offset 67, (0) 8, 9, (00) 8,0 (50) Jib ength 5, m (50 ft),0,0 (00) 6,0 (0),0 (60) 5,0 60,0 (0) 68,0 (0) 8,8 (5.6) 6,8 (.5) (8.) 7,7 (.) 5,8 (0.7) (7.0) 7, (.9) 5, (9.) 8,9 (8.7) 7,9 (8.9) 8, (9.0) 8, (6.) 7, (9.5) 8, (.) 6, (.) (8.) 7,6 (.9) 5, (0.) 80,0, (6.5),0 (5.5),9, (6.6) 8,0 (80),5 (.9),0 (.0),5 (5.0) 0 Offset 0 Offset (0) 5,8 67, (0) 8, 9, (00) (0) 5,8 67, (0) 8, 9, (00), (0) 8,0 (50),0 Jib ength 8, m (60 ft),0 (00) 6,0 (0),0 (60) 5,0 60,0 (0) 68,0 (0) 80,0 (60) 88,0 (80) (90),0 (9.),7 (8.6),8 (5.) (.0) (9.), (7.) (.),0 (9.),5 (8.0),9 (5.7) (.) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

54 fixed jib range diagram 5 No. Fixed Jib on No. 8R

55 fixed jib load chart iftcrane Capacities Fixed Jib No. with 80 mm (' 6") strut on No. 8R kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Offset 5 Offset 0,7 (5) (0) 6,7 (59.0) 5,8 67, (0) 8, 9, (00) (0) 5,8 67, (0) 8, 9, (00) 55,0 (0) 6,7 (59.0) 6,7 (59.0) 0, 0,0 (50) 6, (59.0) 6,7 (59.0) 6,7 (59.0) 6, 0, 7,6 (.6) 9, (6.6) 0, Jib ength 9, m (0 ft) 6,0,0 (00) 0,0 (0) 8,0 (60) 56,0 68,0 (0),6 (56.8), (5.) 8, (0.) 6,0 (59.0), (55.5) 7,6 (9.5), (8.9) (0.9) 6,7 (59.0), (55.0) 6,7 (7.5),5 (6.9) 9,5 (9.9) 6, (.) 5,5 (57.6), (5.9) 5,7 (5.),5 (.7) 8,5 (7.6) 5,5 (.6) 9,6 (.5) 8,9 (.) 5, (.9) 0,9 (.) 7,9 (6.),8 (.) 5,5 (7.7), (.9) 7, (.) 5,7 (5.5), (.6) 8,5 (.8) 7,0 (8.) 5,5 (.),8 (7.6) 9,7 (0.) 9, (.8) 8,0 (0.6) 6, (6.5),9 (5.6) 8,8 (8.) 5,6 (.0) 5,6 5, (.) 5,0 (.), (.) 8, (7.0) 5,0 (.7) 76,0 (50),6 (7.8), (6.9),5 (7.7) 80,0,5 (.), 5 Offset 5 Offset (0) 5,8 67, (0) 8, 9, (00) (0) 5,8 67, (0) 8, 9, (00), (0) 8,9 (.7) 6,0 (50) 7,8 (9.7) 8,6 (.) 0,0 (60) 6,8 (8.0) 7,7 (9.9) 8, (.) 8,9, (6.7), Jib ength 5, m (50 ft) 6,0,0 (0) 0,0 (50) 8,0 56,0 (0) 68,0 (0) 76,0 (60) 8,0 (80) 5,6 (.9),6 (0.9), (5.) 0,9 6,6 (6.) 5,7 (.),6 (.0),7 (.5) 0,7 (7.6) 7, (7.9) 6,5 (5.) 5,5 (0.5),8 (.5) 9,8 (6.8) 6,7 (.9) 7,9 (9.) 7, (6.7) 6, (8.),8 (0.) 8,8 (.6) 5,7 (0.), (7.5), (.) 6,6 (6.5) 6, (.8) 5, (7.0), (8.9) 8, (.) 5,0 (9.0),5 (6.5),0 (.6) 9,8 (0.) 8,8,9 (5.6) 0,8 (.5) 9,7 (0.),5 (7.),5 (.) 0,5 (.9) 9,7 (0.) (7.5),7 (5.8),7 (5.5), (.) 0, (.5) 9, (5.6) 6, (.) 0, (.5) 0, (.5) 0, (.5) 0, (0.) 8,8 (.) 5,5 (9.9),9 (7.) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

56 fixed jib load chart 56 iftcrane Capacities Fixed Jib No. with 80 mm (' 6") strut on No. 8R kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Offset, (0) (0), (.9) 5,8 67, (0) 8, 9,5 (00) (0) 5,8 5 Offset 67, (0) 8, 9,5 (00) 6,0 (50),6 (0.5), (.7) Jib ength 8, m (60 ft) 0,0 (60) 6,0,0 (0) 0,0 (50) 8,0 56,0 (0) 68,0 (0),9 (9.),9 (5.9),0 (.) 0, (.) 9,,5 (0.5),7 (7.6),9 (5.),0 (.) 0, (.5) 9,6 (8.9),0 (.5), (8.9),6 (6.7),7 (.8),0 (.7) 9,9 (7.0) 6,8 (.7),,7 (9.9),0 (7.9), (6.),6 (0.5) 8,9 (.8) 5,8 (0.6),9 (0.), (8.5),6 (6.8), (9.) 8, (.) 5, (9.) 8,7 (7.6) 7,5 (5.) 0, (.) 9,6 (9.7) 8, (7.) 7,5 (5.6) 7,0 0, (.8) 0, (.) 9, (8.9) 8, (7.) 7,6 (5.7) 6,9 (.) 9,5 (.) 9,5 (0.) (8.5) 8, (6.0) 6, (.5) (8.8) 8,5 (8.8) 8,5 (8.8) 8,5 (8.8) 8,5 (.8) 5,7 (0.) 76,0,9 (6.8), (6.5),6 (5.),6, (6.7) 8,0 (80),5 (.9),7 (5.) 5 Offset 5 Offset (0) 5,8 70, (0) 8, 9,5 (00) (0) 5,8 70, (0) 8, 9,5 (00),7 (5) 9, (0.5) 0,0 (60) (0.) 9, (0.) 9, (0.6) 6,0 8,5 (9.) 8,9 (9.9) 9, (0.) 9, (0.) 9, (0.) 5,8 (.9) 6,5 (.5) Jib ength, m (80 ft),0 (00) 0,0 (0) 8,0 (50) 56,0 6,0 (0) 7,0 (0) 80,0 (60) 8,0 (80) 7,8 (7.7) 7,0 (5.6) 6, (.) 5,7 (.9) 8,5 (9.) 7,8 (7.) 7, (6.) 6,5 (.6) 6,0 (.) 5,6 (.) 8,9 (9.9) 8, (8.7) 7,8 (7.7) 7, (6.) 6,8 (5.) 6,0 (.8) (0.),5 (7.) 8,8 (9.5) 8, (8.5) 7,7 (7.) 6,8 (5.) 5, (.0),8 (8.7),0 (6.) 9, (0.) 8,9 (9.7) 8,5 (9.) 8,0 (7.8) 6, (.7) (9.5), (7.),5 (.9) 5,8 (.9) 5,7 (.8) 5,0 (.5) 6,5 (.5) 6,5 (.) 5,7 (.) 5, (.5),7 (0.) 6,8 (5.) 6,8 (5.) 6, (.5) 5,7 (.0) 5, (.7),9 (0.8) 6,6 (.7) 6,6 (.7) 6,6 (.7) 6, (.8) 5,6 (.5) 5, (.5), (9.7),6 (7.6) 6, (.8) 6, (.8) 6, (.8) 6, (.8) 5,9 (.) 5, (.0),7 (8.5), (6.) 88,0 (00),6 (.0),, Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

57 fixed jib range diagram No. Fixed Jib on No. E Main with Open Throat Top 57

58 fixed jib load chart 58 iftcrane Capacities Fixed Jib No. with 80 mm (' 6") strut on No. E with Open Throat Top kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Offset 0 Offset 9, (0) 7, 8, 9,6 (0) 5,8 6,0 (0) 79, (60) 7, 9,6 (0) 5,8 6,0 (0) 79, (60),0 (0) 8, 8, 8, 6,0 (50) 8, 8, 8, 8, 8, 8, 8, Jib ength 9, m (0 ft) 8,0 (60),0 (75),0 (00),0 (0) 5,0 6,0 (0) 8, 8, 8, 8, 8, 8, 5,0 (.8) 8, 8, 8,, (.0) 0,8 (.0) 8, 8, 8,, (.0) 9,9 (.0) 6, (.5) 8, 8, 8,, (8.6) 8,8 (9.6) 5, (.8) 8, 8, (9.8) (.0) 8, 8, 6,9 (8.5) (.6) 8, 8, 8, (.7) (.) 8, 8, 8,,7 (.0) 0, (.7) 8, 8,,8 (9.8) 9, (0.5) 5,5 (.) 7,0 (0), (6.),5 (7.0) 76, (50) (.) 0 Offset 0 Offset 7, 9,6 (0) 5,8 6,0 (0) 79, (60) 7, 9,6 (0) 5,8 6,0 (0) 79, (60) 9, (0),6,0 (0),6,6 6,0 (50),6,6,6,6,6,6 Jib ength, m (0 ft) 8,0 (60),0 (75),0 (00),0 (0) 5,0 6,0 (0) 7,0 (0) 76, (50),6,6,6,6,6,6, (.8),6,6,6,6 0,9 (.),6,6,6, 0,0 (.) 6,5 (.5),7 (7.),6,6,6, (9.0) 8,9 (9.9) 5, (.),5 (7.) (5.),6,6,0 (5.),6,6,7 (9.0) 0, (.5),6,6,6,7 (6.) 0,6 (.5),6,6,8 (8.8) 0, (.) 6,8 (5.0),6,6,0 9,5 (.) 5,8 (.9),0 (8.) (6.) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

59 fixed jib load chart iftcrane Capacities Fixed Jib No. with 80 mm (' 6") strut on No. E with Open Throat Top kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Offset 0 Offset 9, (0) 7, 9,6 (0) 5,8 6,0 (0) 79, (60) 7, 9,6 (0) 5,8 6,0 (0) 79, (60) 59,0 (0) Jib ength 5, m (50 ft) 6,0 (50) 8,0 (60),0 (75),0 (00),0 (0) 5,0 6,0 (0) (9.7) 6,9 (5.) 6,7 (.9) 5,6 (.) 8,6 (9.) 8,6 (9.) 7,0 (5.6) 6,0 (.) 7,0 (0), (8.8),9 (8.0), (9.0) 80,0 (60) (.), (5.5) 7, 9,6 (0) 0 Offset 5,8 6,0 (0) 79, (60) 7, 9,6 (0) 0 Offset 5,8 6,0 (0) 79, (60) 9, (0),0 (0) 6,0 (50) Jib ength 8, m (60 ft) 8,0 (60),0 (75),0 (00),0 (0) 5,0 6,0 (0) 7,0 (0) 80,0 (60) 70,0 (9.7), (5.7),0 (8.5),0 (5.0), (9.),7 (6.) (.7) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

60 fixed jib range diagram 60 No. Fixed Jib on No. E Main with ight Tapered Top

61 fixed jib load chart iftcrane Capacities Fixed Jib No. with 80 mm (' 6") strut on No. E with ight Tapered Top kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 6 60 Rating kg (lb) x Offset 9, (0),5 (0) 8, 8,8 (60) 6,0 7, (0) 88, (90),5 (0) 8,8 (60) 0 Offset 6,0 7, (0) 88. (90),0 (0) 8, 6,0 (55) 8, 8, 8, 8, 8, 8, Jib ength 9, m (0 ft) 0,0 8,0 6,0 (0) 8,0 (50) 56,0 68,0 (0) 8, 8, 7,5 (7.9) 8, 8, 6,5 (5.5) 0,6 (5.) 8, (8.8) 8, 8, 5,6 (.8) 9,8 (.6) 7, (7.),8 (.) 8, 8,,8 (.9) (.7) 6,5 (5.),0 (9.) 8, 8,,8 (9.7) 7,9 (9.5) 5,5 (.9),0 (7.0) 8, 6,8 (7.7), (.6) 8, 8, 6,8 (6.) 0,8 (5.8) 8, 8, 6, (.7) 0, (.) 7,6 (7.5) 8, 8, 5, (.0) 9, (.6) 6,8 (5.7), (9.6) 8,, (.0) 8, (0.5) 5,8 (.6), (7.5) 76,0 (50),7 (6.),9 (.) 8,0 (80) 0 Offset 0 Offset,5 (0) 8,8 (60) 6,0 7, (0) 88, (90),5 (0) 8,8 (60) 6,0 7, (0) 88. (90) 9, (0),0 (0),6 6,0 (55),6,6,6,6 Jib ength, m (0 ft) 0,0 8,0 6,0 (0) 8,0 (50) 56,0 68,0 (0) 76,0 (50) 8,0 (80),6,6,6 (.),6,6,6 0,7 (5.7) 8, (9.0),6,6,6 9,9 (.9) 7,5 (7.),9 (.),6,6,6 9, (.0) 6,6 (5.), (9.5),8 (6.),6,6,5 (9.9) 8,0 (9.7) 5,6 (.),0 (7.),8 (.0),6,8 (8.7) 0,8 (.8),6,6,7 (7.8) 0,7 (.),6,6,6 0, (.7) 7,7 (7.9),6,6,6 9,5 (.) 7,0 (6.),,6,6 8,6 (.) 6,0 (.), (7.9), (.6) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

62 fixed jib load chart 6 iftcrane Capacities Fixed Jib No. with 80 mm (' 6") strut on No. E with ight Tapered Top kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Offset 0 Offset 9, (0),5 (0) 8,8 (60) 6,0 7, (0) 88, (90),5 (0) 8,8 (60) 6,0 7, (0) 88. (90),0 (0) Jib ength 5, m (50 ft) 6,0 (55) 0,0 8,0 6,0 (0) 8,0 (50) 56,0 68,0 (0) 8,9 8, (9.) 7,6 (7.5) 5,0 (.6) 6,7 (5.6), (9.7) 8, 5,7 (.), (7.) (9.8) 8,7 (7.8) 7,9 (8.) 7, (6.7) (0.) 8,8 6, (.7),5 (8.) 76,0 (50),9 (6.5),9 (.), (5.0) 8,0 (80),9 (.0) 0 Offset 0 Offset,5 (0) 8,8 (60) 6,0 7, (0) 88, (90),5 (0) 8,8 (60) 6,0 7, (0) 88. (90) 9, (0),0 (0) Jib ength 8, m (60 ft) 6,0 (55) 0,0 8,0 6,0 (0) 8,0 (50) 56,0 68,0 (0) 76,0 (50) 8,0 (80),8 (8.5), (9.8),0 (6.7),0 (.), (7.5),9 (.), (7.),7 (8.6), (5.) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

63 luffing jib range diagram No. 5 uffing Jib on No. 8 or No. E Main 6

64 luffing jib load charts 6 iftcrane uffing Jib Capacities - Series uffing Jib No. 5 on No. 8 or No. E kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Angle, 0,5 (00),7 (0) 5,8 6,0, 0,5 (00),7 (0) 5,8 6,0, (0) 6, (0.8), (0) 5, (77.9) 5, (77.6) uffing Jib ength, m (70 ft),0 (5) 6,0 (50) 8,0 (60),0,0 6,0 8,0 (00) 0,0 (05),5 (96.7),7 (9.8) 8,7 (8.) 8,7 (68.),7 (96.9),8 (9.) 9,6 (86.9) 0,8 (7.6),7 (7.6), (98.0),7 (9.9) 9,7 (87.),8 (7.5) 5, (5.8) 9,8 (89.) 8,0 ( 8.),0 (7.) 6, (55.) 5, (80.),6 (7.) 7,7 (6.7) 5,6 (55.7) uffing Jib ength 0,5 m (00 ft),0 (5) 6,0 (50) 8,0 (60),0,0 6,0 8,0 (00) 0,0 (05),8 (75.),7 (7.7) 9,8 (65.) 6,5 (59.6) 5, (5.9),8 (9.),7 (.) 9,6 (5.),8 (75.),7 (7.6) 9,9 (65.) 6,6 (59.9) 5, (55.), (8.),8 (.9) 0,8 (.9), (7.),5 (7.0) 9,8 (65.) 6,7 (60.) 5, (55.7), (5.9), (5.7), (.8),9 (70.7), (69.8) 9, (6.5) 6,6 (59.8) 5, (55.), (8.6),5 (.0) 9,8 (0.5) 5, (55.9), (5.8), (5.9),8 (7.5) 0, (.7) 8,9 (8.) 7,7 (6.6),0 (0),0 (0) 6,0 (.0) 9, (5.6) 8, (8.) 6,6 (5.), 0,5 (00),7 (0) 5,8 6,0, 0,5 (00),7 (0) 5,8 6,0,7 (5),7 (5.), (5.6),7 (5) uffing Jib ength,7 m (0 ft) 6,0 (50) 8,0 (60),0,0 0,0 (00) 8,0 (0),0 (0) 50,0 (60) 5,0, (50.) 0,9 (5.9) 8,6 (.0) 7,6 (8.5),8 (.),0 (7.5) 9, (.8), (9.8) 0,9 (5.8) 8,7 (.) 7,7 (8.7) 5,0 (.7), (7.8) 0,6 (.0),6 (8.) 0,7 (5.) 8,7 (.0) 7,7 (8.8) 5, (.0), (8.) 0,7 (.) 0,7 (6.) 0, (.6) 8,5 (.6) 7,6 (8.6) 5, (.),5 (8.5) 0,8 (.7) 9,7 (.8) 9, (.5) 7,9 (0.) 7, (7.6),8 (.),8 (7.) 0, (.) uffing Jib ength 5,8 m (70 ft) 6,0 (50) 8,0 (60),0,0 0,0 (00) 8,0 (0),0 (0) 50,0 (60) 5,0 6,5 (6.),6 (.9),7 (9.8), (.) 8,6 (9.9) 6,9 (6.) 5,6 (.) 6,5 (6.),6 (.9),7, (.7) 8,6 (0.) 7,0 (6.) 5,7 (.),8 (0.) 6, (5.6),6 (.8),7, (.9) 8,8 (0.5) 7, (6.7) 5,9 (.6),9 (0.6) 5,9 (5.0), (.),7 (9.9),5 (5.) (0.7) 7, (7.0) 6,0 (.9) 5, (0.9) (.),9 (.0),5 (9.6),5 (5.) 9, (.0) 7, (7.) 6, (.) 5, (.) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

65 luffing jib load charts iftcrane uffing Jib Capacities - Series uffing Jib No. 5 on No. 8 or No. E kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Angle 65, 0,5 (00),7 (0) 5,8 6,0, 0,5 (00),7 (0) 5,8 6,0 0,0 (60), (00.),8 0,0 (60) uffing Jib ength, m (70 ft),0,0 8,0 0,0 (00),0 (0) 6,0 (0),0 (0),0 (50) 0,8 (9.5) 6,0 (77.0) 6,6 (6.) 9,8 (9.) 5,8 (77.5) 9,7 (67.) 7, (59.0) (7.7) 8, (6.8) 5,9 (56.) (9.8) 6,8 (60.8),7 (5.5), (7.5) 9,7 (.6),6 (5.) 0, (5.5) 8,8 (0.8) uffing Jib ength 0,5 m (00 ft),0,0 8,0 0,0 (00),0 (0) 6,0 (0),0 (0),0 (50) 9, (6.8) 6, (58.9),9 (5.0) 0,5 (6.) 8,6 (0.) (67.6) 7,9 (6.6) 6,6 (58.), (5.9),5 (6.) 7,8 (6.8) 5,5 (55.),8 (9.) 0, (.) 6,7 (6.) (5.) 0,7 (6.6) 9, (.8) 5,9 (.) 5,0 (.) 9,7 (.) 8, (9.9) 5, (.8), 6,0 (55) 6,0 (55), (8.7), 0,5 (00),7 (0) 5,8 6,0, 0,5 (00),7 (0) 5,8 6,0 8,0 8,0 (0.) 8,0 uffing Jib ength,7 m (0 ft) 0,0 (00),0 (0) 8,0 (0),0 (0) 6,0 (50) 50,0 (60) 5,0 60,0 68,0 (0) 7, (7.) 5, (.),8 (.7), (7.0), (5.) 9, (.6) (9.5) 6, (6.6),7 (.8), (8.9),0 (6.7) 0,9 (.9) 7,5 (9.) 6,0 (6.6) (.6), (9.),9 (7.) 0,9 (.9) 6,7 (8.0) 5, (.),7 (0.6), (8.), (.0),6 (.7),0 (9.0),6 (6.6) 0,5 (.7) uffing Jib ength 5,8 m (70 ft) 0,0 (00),0 (0) 8,0 (0),0 (0) 6,0 (50) 50,0 (60) 5,0 60,0 68,0 (0),5 (5.9) 0, (.5) 8,9 (9.) 7,7 (7.) 6,7 (5.6) 5,8 (.5),0 (5.) 9,6 (0.9) 8, (8.9) 7, (7.0) 6, (.8) 5,0 (0.6) 0,7 (.) 9, (.) 8, (9.) 7, (5.6) 5,9 (.5), (.7) 0, (.8) 9, (0.8) 8,0 (7.) 6,5 (.0) (0.8) (5.) 0,8 (.) 9,8 (.) 8,7 (8.7) 7, (5.5) 5, (.) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

66 luffing jib load charts 66 iftcrane uffing Jib Capacities - Series uffing Jib No. 5 on No. 8 or No. E kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Angle, 0,5 (00),7 (0) 5,8 6,0, 0,5 (00),7 (0) 5,8 6,0 8,0 8, (6.) 8,0 uffing Jib ength, m (70 ft) 0,0 (00),0 (0) 8,0 (0),0 (0) 6,0 (50) 50,0 (60) 5,0 60,0 6, (56.5) (50.) 0,7 (6.6) 8,0 (.8),0 (0.) (6.6) 0,8 (.) (.) 8,5 (9.5) uffing Jib ength 0,5 m (00 ft) 0,0 (00),0 (0) 8,0 (0),0 (0) 6,0 (50) 50,0 (60) 5,0 60,0, (7.6) 9, (.) 6,9 (6.5) 5,6 (.7),8 (0.8),0 (6.7) 0,7 (.5) 9, (.) 8, (7.9) 7, (5.) 6,0 (.0) 6,0 (0) 6,0 (0), 0,5 (00),7 (0) 5,8 6,0, 0,5 (00),7 (0) 5,8 6,0,0 (0), (0.),0 (0) uffing Jib ength,7 m (0 ft) 6,0 (5) 50,0 (50) 5,0 (60) 58,0 6,0 66,0 (0) 7,0 (0) 76,0 (60) 80,0,7 (9.),6 (8.) 0,7 (6.) (.5),0 0,8 (7.) 9,7 (.) 9, 8, (9.8) 7,5 (7.0) 6,9 6, (.) 5,6 (.),7 (0.),9 (8.5) uffing Jib ength 5,8 m (70 ft) 6,0 (5) 50,0 (50) 5,0 (60) 58,0 6,0 66,0 (0) 7,0 (0) 76,0 (60) 80,0 8,0 7,0 (8.) 6, (5.) 5, (.9) 8, 7, (7.5) 6, (.) 5, (.) 7, (6.) 6,5 (.0) 5, (.5) 5, (.) (9.8), (8.),6 (7.8), (6.5),8 (6.0) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

67 No. 9 uffing Jib on No. 8 Main luffing jib range diagram 67

68 luffing jib load charts 68 iftcrane uffing Jib Capacities - Series uffing Jib No. 9 on No kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Angle, (0),7 (0) 5,9 6,0, (0),7 (0) 5,9 6,0,0 (6) 7,5 (60.0),0 (6) uffing Jib ength, m (70 ft),0 (0) 6,0 (5) 8,0 (55) 0,0,0 8,0 (00) 0,0 (0),0 (0) 59, (5.) 5,7 (.5) 6,8 (.7) 0,7 (8.5) 5,7 (9.9) 5, (.9) 9, (.7) 5, (05.),6 (87.), (65.8) 5,7 9, (0.) 5, (0.9), (8.),7 (66.7) 0,6 8,8 (90.) 7, (8.),0 (70.) 8,8 (6.),5, (70.5) 0, (6.) 5,6 (56.) uffing Jib ength m (0 ft),0 (0) 6,0 (5) 8,0 (55) 0,0,0 8,0 (00) 0,0 (0),0 (0) 5, 8,8 (5.0),8 (99.8) 9, (8.), (67.8) 5, (9.8),0 (.5) 9, (8.5),,7 (97.5) 9,5 (9.5) 6,5 (76.8),6 (68.8) 5,7 (50.0), (.) 9, (8.5) 8,5 6,9 (85.5) 5,7 (8.), (7.) 8,6 (6.9), (5.8), 7,7 (5.7) 8,6 7,5 (6.5) 6,7 (59.9) 5, (55.6), (50.9) 9,6 (9.) 8, (.5) 5, (.),8,9 (5.9), (7.) 0,5 (.6) 7, (.7) 6,0 (0.9),7 (8.0) 8,0 (0) 8,0 (0) 5,8 (5.) 6,7 (.) 5,5 (.7),6 (9.5), (6.), (0),7 (0) 5,9 6,0, (0),7 (0) 5,9 8,0 (55), (7.5) 6,8 (59.9), (5.) 8,0 (55) uffing Jib ength 5,8 m (70 ft),0 (60) 6,0 (75) 0,0 (00) 6,0 (5),0 (50) 5,0 60,0 68,0 (0) 76,0 (50),5 (70.9) 7,6 (68.9), (8.) 7,0 (.5), (5.7) 9, (.7) 5,9 (59.),8 (56.7),5 (6.5) 6,9 (.5),5 (6.) 9,9 (8.7), (5.), (50.8) 9, (.9) 5, (.), (.8) 9, (8.6) 8, (.) 7, (9.7) 5,9 (.),8 (6.) 9,7 (0.) 7,9 (7.) 5,9 (6.8) 5,0 (.),9 (0.), (.) 8,6 (8.) 7,0 (5.) uffing Jib ength 7, m (0 ft),0 (60) 6,0 (75) 0,0 (00) 6,0 (5),0 (50) 5,0 60,0 68,0 (0) 76,0 (50) 5,7 5, (.5),7 (.),0 (0.5),0 (.7) 7,9 (5.5) 5,6 (.0),9 (7.9),6 (0.8), (9.),7 (7.5) 0,6 (.) 8,5 (7.) 6,8 (.5),9,7 (5.8),7 (8.7), (7.),7 (.8) 9,5 (0.) 7,6 (5.5) 6, (.) 5, (0.7),6 (5.6) 0,5 (.7) 0, (.) 9,5 (0.) 7,7 (6.) 6, (.6) 5,0 (0.8), (9.0),0 (6.5) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

69 luffing jib load charts iftcrane uffing Jib Capacities - Series uffing Jib No. 9 on No kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Angle 69, (0),7 (0) 5,9 6,0, (0),7 (0) 5,9 6,0,7 (5) (8.7),7 (5) uffing Jib ength, m (70 ft) 6,0 (50) 8,0 (60) 0,0,0 6,0 0,0 (00),0 (0) 8,0 (0) 58,9 (5.7) 5,7 (.5) 7, (9.7),0 (77.8) 5,5 (.0) 6,5 (9.), (79.8), (68.6) 5, (.6) 6,0 (9.5) 0,7 (79.0),0 (68.0),8 (9.) 0,0 (77.), (66.5) (8.8) 6,7 (7.8) 0,5 (6.) 5,5 (55.) uffing Jib ength m (0 ft) 6,0 (50) 8,0 (60) 0,0,0 6,0 0,0 (00),0 (0) 8,0 (0) (0.), (89.8) 9,6 (76.8),6 (6.) 5,5 (55.0), (.8) 7,8, (86.8) 8, (77.6),7 (67.) 7, (58.9) 5,0 (6.5) 0,0 (7.0),5 (87.6) 8,8 (77.), (66.6) 6,9 (58.),8 (6.0) 9,8 (7.) (7.8),5 (70.7), (6.8) 6, (56.6), (.7) 9, (6.) (59.6) 6,5 (57.5) (5.8),5 (.6) 7,8 (.6),0 (50),0 (50) 5,7 (0.), (0),7 (0) 5,9 6,0, (0),7 (0) 5,9,0 (75),5 (7.6),0 (75) uffing Jib ength 5,8 m (70 ft) 0,0 6,0,0 (0) 8,0 (0) 5,0 (60) 60,0 66,0 (0) 70,0 (0) 7,0 (60) 5,0 (70.8) 8,7 (6.) (6.),5 (5.) 9, (.8) 6,0 (65.5) 0,7 (6.0) 6,8 (50.),6 (0.),0 (9.) (0.) 6,0 0,5 (59.8) 6,6 (9.7),7 (9.7),5 (9.6) (.5), 9,8 (7.) 5,9 (6.5),0 (8.) 0,8 (8.) (.) 8, 7, (.0),7 (.) 9,6 (5.) 7,9 (8.8) uffing Jib ength 7, m (0 ft) 0,0 6,0,0 (0) 8,0 (0) 5,0 (60) 60,0 66,0 (0) 7,0 (0) 80,0 (65) 6,, (6.) 0, (.6) 7,9 (.8) 6, (.9),7, (7.5),7, (.9), (.) 9,7 (6.) 7,7 (8.) 6, (.9),,9,6 (.0),5 (0.) 0, (7.0) 8, 6,7 (.),9 (.),7,5 (6.0) 0,7 (5.6) 9, (.) 7, (7.5) 5,9 (.6),, (7.) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

70 luffing jib load charts 70 iftcrane uffing Jib Capacities - Series uffing Jib No. 9 on No kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Angle, (0),7 (0) 5,9 6,0, (0),7 (0) 5,9 6,0 9,8 (65) (00.) 9,8 (65) uffing Jib ength, m (70 ft),0 6,0 0,0 (00),0 (0) 8,0 (0),0 (0) 6,0 (50) 8,0 (60) 9,8 (9.), (77.) 0,8 (7.7) 5,7 (55.6) 0,0 (7.7) 5,0 (5.), (50.5) 9,8 (9.7), (8.5) (8.) 6, uffing Jib ength m (0 ft),0 6,0 0,0 (00),0 (0) 8,0 (0),0 (0) 6,0 (50) 8,0 (60),5 6, (56.7), (.8) 9, (0.) 6,8 (6.),8 (5.6), (.) 8, (8.0) 5,9 (.),0 (.) (5.9) 0, (0.9) 7,6 (6.7) 5, (.),5 (0.),7 (7.) 8,8 (7.7) 6, (.8), (0.5), (7.6),6 (5.) (5.9) 5, (.), (9.0),7 (6.),0 (.9) 5,0 5,0 (.9) 9,7 (.7), (0),7 (0) 5,9 6,0, (0),7 (0),0 (0),5 (8.),0 (0) uffing Jib ength 5,8 m (70 ft) 0,0 (5) 6,0 (5) 5,0 (0) 58,0 (60) 6,0 70,0 (0) 76,0 (60) 8,0 (80) 88,0 (90) 7, (5.5), (0.7), (.7) (8.0) 6,, (8.0),0 (.5) 9, (6.7) (0.) 5,5,6 (6.6) 0,5 (.) 8,8 (5.6) 7, (9.5), 9, (8.) 7,9 (.) 6,6 (7.5) 0,7 8,8 (6.7) 7, (.7) 6, (6.) uffing Jib ength 7, m (0 ft) 0,0 (5) 6,0 (5) 5,0 (0) 58,0 (60) 6,0 70,0 (0) 76,0 (60) 8,0 (80) 88,0 (90),9 9,9 (.0) 7,7 (5.) 5,9 (7.),6 (0.), (6.),8 9,6 8,0 (.8) 6,6 (7.7) 5,5 (.) (9.0),7 9, 7,5 (.6) 6, (6.7) 5,0 (.), (8.), (6.6) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

71 luffing jib load charts iftcrane uffing Jib Capacities - Series uffing Jib No. 9 on No kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Angle 7, (0),7 (0) 5,9 6,0, (0),7 (0) 5,9 6,0 5,9 (85) (67.) 5,9 (85) uffing Jib ength, m (70 ft) 0,0,0 (00) 6,0 (0) 0,0 (0),0 (0) 8,0 (60) 5,0 56,0 5, (6.6), (5.8) (8.), 8, (.) (9.) 7, (.8),9 (7.),9, (6.0) 0, (.7) 8,9 (9.) uffing Jib ength m (0 ft) 0,0,0 (00) 6,0 (0) 0,0 (0),0 (0) 8,0 (60) 5,0 56,0 9, 6,7 (.5),6 (.7),9 (7.8),0, (.8) 0,, (8.0) 0,7 (.) 9, (9.) 8, (9.) 7,8 (5.7) 6,8 (.9) 6,8 (.7) 6,0 (.) 60,0 (0) 60,0 (0) 6,0 5, (0.), (0),7 (0) 5,9, (0) 6,0 (5),9 (0.) 6,0 (5) uffing Jib ength 5,8 m (70 ft) 50,0 (50) 5,0 (60) 58,0 6,0 68,0 (0) 7,0 (50) 80,0 (80) 8,0 (90) 88,0 (95), (8.8) 0, (6.) (.8) 8,0 8,7 7,7 (0.6) 6,8 (7.) 5,7 (.0) 7,9 7,0 (8.9) 6, (5.6) 5, (.8) 5,,7 (.0),8 (8.8),0 (6.) uffing Jib ength 7, m (0 ft) 50,0 (50) 5,0 (60) 58,0 6,0 68,0 (0) 7,0 (50) 80,0 (80) 8,0 (90) 88,0 (95) 7,7 6,8 (7.) 5,6 (.8) (9.), (5.6),7, (0.),5 (7.),8 (.9), (.),9 Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

72 fixed jib on luffing jib range diagram No. 8 Fixed Jib on No. 5 uffing Jib on No. 8 or No. E Main 7

73 fixed jib on luffing jib load charts iftcrane Fixed Jib on uffing Capacities - Series Fixed Jib No. 8 at Degree Angle on uffing Jib No. 5 on No. 8 or No. E kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Angle 7 uffing Jib,7 5,7 8,8 5,8 (0) (50) (60) 8,8 (60) 5,9 6,0 8,8 (60) 5,9 6,0 8,8 (60) 5,9 6,0 8,8 (60) 5,9 6,0 8, (60), (7.5), (7.), (6.8), (7.0),0 (6.6) Fixed Jib ength 9, m (0 ft),0 8,0,0 (0) 0,0 (0) 8,0 (50) 5,0 58,0 6,0 (0), (6.9),5 (5.8) 0,0 (.) 8,8 (9.7) 7,8 (7.8) 7, (6.),0 (6.6),5 (5.6) 0,0 (.) 8,9 (9.8) 7,8 (7.9) 7, (6.0),8 (6.), (5.) 0,0 (.) 8,9 (9.9) 7,6 (7.9) 6,8 (5.),9 (6.), (5.) 9,8 (.0) 8,7 (9.5) 7,7 (7.6) 7, (6.) (.0),7 (6.), (5.) 9,8 (.0) 8,7 (9.5) 7,7 (7.6) 7,0 (5.7) 6,0 (.),6 (5.7), (.8) 9,8 (.0) 8,8 (9.6) 7, (7.) 6,7 (.9) 5,7 (.8),6 (5.8),0 (.7) 9,6 (.6) 8,6 (9.) 7,6 (7.) 7, (5.9) 6, (.7), (5.) 0,9 (.) 9,7 (.6) 8,6 (9.) 7,5 (7.) 6,8 (5.) 5,9 (.) 0,9 (.) 0,5 (.) 9,6 (.5) 8,5 (9.) 7, (6.7) 6,5 (.5) 5,6 (.5) 0,6 (.7) 0,0 (.) 9, (.) 8, (8.8) 7, (7.) 6,9 (5.) 6,0 (.) 5, 0, (.8) 9,7 (.6) 9, (0.7) 8, (8.8) 7, (6.8) 6,6 (.7) 5,7 (.8) 5, 9,8 (.7) 9, (0.8) 8,9 (9.9) 8,0 (7.9) 6,8 (5.9) 6, (.9) 5,5 (.),8 7,0 (0) uffing Jib,7 5,7 8,8 5,8 (0) (50) (60) 8,8 (60) 5,9 6,0 8,8 (60) 5,9 6,0 8,8 (60) 5,9 6,0 8,8 (60) 5,9 6,0 8, (60) Fixed Jib ength 8, m (60 ft),0 8,0,0 (0) 0,0 (0) 8,0 (50) 5,0 58,0 6,0 (0) 7,0 (0) 7, (6.) 6,7 (5.0) 6, (.8) 5,7 (.8) 5,0 (.6),7 (0.), (9.5),9 7, (6.) 6,7 (.9) 6, (.7) 5,7 (.7) 5,0 (.6),7 (0.), (9.5),9 7, (5.9) 6,6 (.7) 6, (.6) 5,7 (.8) 5,0 (.6),7 (0.5), (9.5),9 7, (5.8) 6,5 (.6) 6,0 (.5) 5,6 (.5),9 (.),6 (0.), (9.),9 (8.) 7,0 (5.6) 6,5 (.5) 6,0 (.) 5,6 (.5),9 (.5),6 (0.), (9.),9 (8.) 6,9 (5.) 6, (.) 5,9 (.) 5,5 (.) 5,0 (.5),6 (0.), (9.),9 (8.) 6,8 (5.) 6, (.) 5,8 (.0) 5,5 (.),8 (.) (0.), (9.),8 (8.) 6, (.9) 5,8 (.9) 5, (.),9 (.),6 (0.), (9.),8 (8.) 6, (.7) 5,7 (.8) 5, (.0),9 (.),6 (0.), (9.),9 (8.) 6,0 (.5) 5,6 (.6) 5, (.8),8 (.), (9.),8 (8.), (7.6) 5,9 (.) 5,6 (.5) 5, (.7),8 (.0), (9.),8 (8.), (7.6) 5,8 (.) 5,5 (.) 5, (.5),8 (0.9), (9.),8 (8.), (7.6) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

74 fixed jib on luffing jib load charts 7 iftcrane Fixed Jib on uffing Capacities - Series Fixed Jib No. 8 at Degree Angle on uffing Jib No. 5 on No. 8 or No. E kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Angle uffing Jib,7 5,7 8,8 5,8 (0) (50) (60) 8,8 (60) 5,9 6,0 8,8 (60) 5,9 6,0 8,8 (60) 5,9 6,0 8,8 (60) 5,9 6,0 6,0 (85), (7.0) Fixed Jib ength 9, m (0 ft) 8,0 0,0 (95),0 (0) 8,0 (0),0 (0) 5,0 60,0 7,0 (0), (6.8),0 (6.6), (5.0) 0, (.) (0.5) 7,9 (7.5),0 (6.6),9 (6.), (5.) 0, (.7) 9, (0.8) 8,0 (7.8) 7, (5.9),8 (6.),7 (6.0),5 (5.5) 0,5 (.) 9, (.) 8, (8.0) 7, (6.0),8 (6.),7 (6.0) 0,9 (.5) 0,0 (.9) 8,9 (0.) 7,8 (7.) 7,0 (5.),6 (5.8), (.9) 0, (.) (0.5) 7,9 (7.5) 7, (5.5), (5.), (5.0) 0, (.5) 9, (0.8) 8,0 (7.7) 7, (5.7),0 (.6) 0,8 (.0) 9,8 (.) 8,7 (9.9) 7,7 (7.) 6,9 (5.) 0,7 (.7) 0, (.) 0,0 (.7) 8,9 (0.) 7,8 (7.) 7,0 (5.) 0, (.) 9,9 (.) (0.) 7,9 (7.5) 7, (5.5) 9,8 (.9) 9,6 (.) 9, (0.9) 8,6 (9.5) 7,6 (6.8) 6,8 (5.0) 9, (0.7) 9, (0.) 8,7 (9.7) 7,6 (7.0) 6,9 (5.) (.8) (9.9) 8,8 (9.6) 8,6 (9.) 7,7 (7.) 6,9 (5.) (.) 80,0 (60) uffing Jib,7 5,7 8,8 5,8 (0) (50) (60) 8,8 (60) 5,9 6,0 8,8 (60) 5,9 6,0 8,8 (60) 5,9 6,0 8,8 (60) 5,9 6,0 6,0 (85) Fixed Jib ength 8, m (60 ft) 8,0 0,0 (95),0 (0) 8,0 (0),0 (0) 5,0 60,0 7,0 (0) 80,0 (60) 6,5 (.6) 6, (.9) 5,7 (.9) 5, (.), (9.7) 6, (.) 6, (.9) 5,7 (.9) 5, (.5) (9.9) (8.7) 6, (.) 6, (.8) 5,7 (.9) 5, (.7),6 (8.8) 6, (.0) 6,0 (.5) 5,6 (.6) 5,0 (.), (9.6) (8.5) 6, (.0) 6,0 (.5) 5,6 (.6) 5, (.), (9.7),8 (8.6) 6, (.9) 5,9 (.) 5,5 (.5) 5, (.5) (9.9),8 (8.7) 6, (.6) 5,8 (.) 5,5 (.),9 (.0), (9.5),7 (8.) 6,0 (.) 5,8 (.0) 5, (.) 5,0 (.), (9.6),7 (8.5) 6,0 (.) 5,7 (.9) 5, (.) 5,0 (.), (9.7),7 (8.6) 5,8 (.0) 5,6 (.6) 5, (.8),8 (0.8), (9.),6 (8.) 5,7 (.8) 5,5 (.5) 5, (.7),8 (0.8), (9.),7 (8.) (7.6) 5,7 (.6) 5, (.) 5, (.6),8 (0.8), (9.6),7 (8.) (7.6) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

75 fixed jib on luffing jib load charts iftcrane Fixed Jib on uffing Capacities - Series Fixed Jib No. 8 at Degree Angle on uffing Jib No. 5 on No. 8 or No. E kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Angle 75 uffing Jib,7 5,7 8,8 5,8 (0) (50) (60) 8,8 (60) 5,9 6,0 8,8 (60) 5,9 6,0 8,8 (60) 5,9 6,0 8,8 (60) 5,9 6,0 8,0 (55) 0, (.) Fixed Jib ength 9, m (0 ft) 50,0 (60) 5,0 58,0 6,0 (0) 7,0 (0) 76,0 (50) 8,0 88,0 (90) 9,9 (.5) 9,5 (.) 8,6 (9.0) 7,8 (7.) (5.0) 9,8 (.9) 8, (8.7) 7, (6.) 6,0 (.0) 9, (0.7) 7,9 (7.6) 6,8 (5.) 5,6 (.) 9,7 (.9) 9, (0.8) 8, (8.7) 7,7 (7.)) 6, (5.0) 9,6 (.) 8, (8.6) 7, (6.0) 6,0 (.9) 5, (.0) 7,9 (7.5) 6,8 (5.0) 5,6 (.0) 5, (.) 8,8 (9.6) 8, (8.) 7,6 (6.9) 6, (.6) 5,7 (.7) 8, (8.) 7,0 (5.6) 5,8 (.5) 5, (.7) 7,7 (7.) 6,6 (.6) 5, (.6),9 (0.9) 7,6 (6.8) 7, (6.) 6, (.) 5,6 (.5) 7, (6.) 6,9 (5.) 5,7 (.) 5, (.5) (9.9) 6,9 (5.) 6, (.) 5, (.),8 (0.6) (9.) 9,0 (00) uffing Jib,7 5,7 8,8 5,8 (0) (50) (60) 8,8 (60) 5,9 6,0 8,8 (60) 5,9 6,0 8,8 (60) 5,9 6,0 8,8 (60) 5,9 6,0 8,0 (55) Fixed Jib ength 8, m (60 ft) 50,0 (60) 5,0 58,0 6,0 (0) 7,0 (0) 76,0 (50) 8,0 88,0 (90) 9,0 (00) 5, (.9) 5,0 (.), (0.), (9.) 5, (.9) 5, (.),6 (0.), (9.5) (8.9) 5, (.8) 5, (.),7 (0.9) (9.9) (9.) 5, (.5),9 (0.9), (9.9), (9.) (8.5) 5, (.) 5,0 (.) (0.), (9.),8 (8.7),9 (.0),6 (0.7), (9.7),9 (8.9),9 (.0),8 (0.7), (9.8),0 (9.0),7 (8.),9 (0.9),8 (0.6), (0.), (9.),8 (8.6),6 (8.0),7 (0.5),6 (0.), (9.6),9 (8.8),7 (8.),7 (0.5),6 (0.), (9.6),0 (8.8),6 (8.),5 (7.7) (0.), (9.9), (9.),7 (8.),5 (7.9) (7.7), (9.8), (9.),8 (8.7),6 (8.), (7.6) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

76 fixed jib on luffing jib range diagram 76 No. Fixed Jib on No. 9 uffing Jib on No. 8 Main

77 fixed jib on luffing jib load charts iftcrane Fixed Jib on uffing Capacities - Series No. Fixed Jib on No. 9 uffing Jib on No. 8 Main kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Angle 77 uffing Jib 5,8 5,9 6,0 6,0 (0), (0) 57,9, (0) 57,9, (0) 57,9, (0) 57,9,0, (7.) 8, (0.6),8 (8.5) 9,5 (.) 7,0 (7.7) Fixed Jib ength 9, m (0 ft) 8,0,0 (0) 0,0 (0) 8,0 (50) 5,0 58,0 6,0 (0) 7,0 (0) 0, (5.6) 7, (9.0), (.9) 0, (5.) (0.) 7, (6.),6 7,6 (9.) (.6),6 (6.) 8,6 (0.8) 7,5 (6.7) 6, (.7) 5,,0 (6.7) 0, (.8) 8, (8.) 6, (.8) 5, (.0),9 (.) 6,6 (7.),0 (.) 0, (.7) 8,7 (9.5) 7,0 (5.5) 5,6 (8.5) 6, (6.), (.7),5 (5.7) 8,6 (0.7) 7,5 (6.8) 6, (.8) 5, (.), (5.) 9,8 (.) 8,0 (8.0) 6,0 (.6) 5, (.9), (9.8),8 (8.) 5,8 (5.) 5, (.8), (9.9) 9,8 (.8) 8, (8.6) 6,6 (.7) 5, (0., (5.5),8 (0.6), (9.),0 (.6) 8,5 (0.) 7,5 (6.7) 6, (.8) 5, (0.7), (8.5) 9,9 (.0) 9, (0.) 7,5 (6.9) 5,8 (.9) 5, (.), (9.5),6 (7.),0 (6.), (.0),8 (0.7),9 (8.9) 9,6 (.) 8, (8.) 6, (.),9 (9.6), (7.),7 (8.), (7.) 0,6 (.8) 8, (9.9) 7, (6.6) 6, (.8) 5, (0.7), (9.) 9, (0.6) 8,7 (9.) 7, (6.) 5,7 (.6) 5,0 (.), (9.),5 (7.),8 (5.9) 76,0 (50),9 (.0), (7.0), (.9) uffing Jib 5,8 5,9 6,0 6,0 (0), (0) 57,9, (0) 57,9, (0) 57,9, (0) 57,9,0 (85) (.0) (.0) (9.) (.) (.) (8.) (.8) Fixed Jib ength 8, m (60 ft) 8,0,0 (0) 0,0 (0) 8,0 (50) 5,0 58,0 6,0 (0) 7,0 (0) 8,0 (80) 0,6 (.6) 0,0 (.) 9,5 (.) 8, (9.) 7,5 (6.7) 6,6 (.6) 5,8 (.9), (7.9) 0, (.7) 9,8 (.7) 9, (0.7) 8,0 (9.0) 6,9 (5.5) 5,6 (.6),6 (9.),7 (8.) 8,6 (9.) 8, (8.5) 7, (6.7) 5,7 (.7) 5,0 (.),0 (8.9), (6.7),6 (5.8) 0, (.) 9,8 (.9) 9, (0.8) 7,9 (8.6) 7, (6.) 6, (.) 5,6 (.7), (9.) 9,9 (.0) 9,5 (.) 9, (0.) 7,8 (8.) 6,9 (5.5) 5,7 (.7),7 (9.5),7 (8.) 8, (8.) 7,9 (7.6) 7, (6.) 5,6 (.),9 (0.9),0 (8.9), (6.6),6 (5.6) 9,7 (.6) 9, (0.9) 8,0 (8.7) 7, (6.) 6, (.) 5,5 (0.8),9 (8.) 9, (0.) 8,9 (9.7) 8,6 (9.) 7,6 (8.0) 6,8 (5.) 5,6 (.6),7 (9.6),7 (8.) 7, (6.) 7, (5.7) 6,7 (5.0) 5, (.6),7 (0.5),8 (8.6), (6.5),5 (5.) 9, (0.7) (0.) 8,7 (9.) 7,6 (7.8) 7,0 (5.5) 6, (.6) 5, (0.),7 (7.9),7 (.9) 8,6 (9.) 8, (8.7) 8, (8.) 7, (7.5) 6,6 (.8) 5,6 (.5),7 (9.6),7 (8.) 6,7 (.9) 6, (.) 5, (.) (0.),8 (8.5), (6.),5 (5.) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

78 fixed jib on luffing jib load charts 78 iftcrane Fixed Jib on uffing Capacities - Series No. Fixed Jib on No. 9 uffing Jib on No. 8 Main kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Angle uffing Jib 5,8 5,9 6,0 6,0 (0), (0) 57,9, (0) 57,9, (0) 57,9, (0) 57,9 8,0,8 (9.0) Fixed Jib ength 9, m (0 ft) 0,0 (95),0 (0) 8,0 (0),0 (0) 5,0 60,0 7,0 (0) 76,0 (50) 0,7 (7.0) 8,6 (.7) 7,0 (8.9), (.0) 9,7 (.7) 7, (5.5) 0,9 (6.) 9, (.8) 7, (9.5),6 (.6),6 (5.9) 8,6 (8.), (.9),6 (.), (6.) 8,7 (9.) 6,6 (.) (.) 0,0 (5.5) 8, (0.5) 6, (7.),0 (0.) 9,5 (.) 7,0 (5.0) 8,6 (.5) 6,5 (8.0),0 (.), (5.) 8,5 (8.) (.), (9.7),9 (9.),0 (5.) 8,6 (9.) 6,6 (.),7 (.0) 7, (8.8) 6,0 (6.),6 (9.5) 9, (0.) 6,6 (.),0 (9.7) 5,8 (5.0) 5,7 (.8),5 (.0),0 (.5) 8, (7.5) 5, (.), (9.6), (5.) 0, (.6) 8, (8.5) 6,5 (.), (0.6),8 (8.) 6,0 (5.6),9 (.0), (9.) 8,9 (9.8) 6, (.6),8 (9.), (6.9) (.0), (.7), (0.) 0,7 (.9) 7,9 (7.0) 5,0 (.0), (9.) 0,6.5) 9,9 (.5) 8, (8.0) 6, (.9), (0.),5 (7.8) 80,0 (60) (7.) (8.0),9 (6.8) uffing Jib 5,8 5,9 6,0 6,0 (0), (0) 57,9, (0) 57,9, (0) 57,9, (0) 57,9,0 (05),8 (6.) Fixed Jib ength 8, m (60 ft) 8,0 (0),0 (0) 5,0 60,0 7,0 (0) 80,0 (60) 8,0 (75) 86,0 (85) 88,0 (90), (5.) 9,9 (.7) 8, (8.0) 6,8 (.8) 5,0 (.8), (.7) 0, (.) 8, (8.) 6,8 (.8) 5, (.) 9,8.8) 9,6 (.) 8, (8.0) 6, (.), (9.9) (7.6), (.8) 9,5 (.8) 7,8 (7.) 6,5 (.),7 (.) (5.6) 0,8 (.) 9,8 (.) 7,9 (7.6) 6,6 (.) 5, (.8), 9, (0.7) 9, (0.) 7,9 (7.6) 6, (.),, (7.6) 0,5 (.6) 9,5 (.8) 7,9 (7.5) 6,6 (.), (0.),0 (6.9) (5.5) 0, (.) 9,7 (.0) 8,0 (7.8) 6,7 (.5) 5, (.), (9.),8 (7.7),9 (5.) 8, (8.) 7, (6.6) 6,0 (.),, (7.6), (6.),5 (5.5), (5.0) (.7) (0.7) 7, (6.6) 6, (.6), (9.9),8 (6.5),5 (5.0),0 (.) 9, (.0) 7,6 (6.9) 6, (.8) 5,0 (.5),8 (8.8),5 (7.),9 (6.),6 (5.8) 7,7 (7.) 7, (6.0) 5,9 (.8), (9.9), (7.),8 (5.8), (5.0), (.6) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

79 fixed jib on luffing jib load charts iftcrane Fixed Jib on uffing Capacities - Series No. Fixed Jib on No. 9 uffing Jib on No. 8 Main kg (9,600 lb) Upperworks Counterweight 6 88 kg (80,000 lb) Carbody Counterweight 60 Rating kg (lb) x Angle 79 uffing Jib 5,8 5,9 6,0 6,0 (0), (0) 57,9, (0) 57,9, (0) 57,9, (0) 57,9,0 (05) 0, (.9) 8,0 (0) 7,6 (7.) 8, (7.7) (.) 6,9 (5.8) 7,7 (7.) (9.0) 6,5 (5.) (.8) 5, (.9) (0.7) Fixed Jib ength 9, m (0 ft) 8,0 (55) 50,0 (60) 5,0 58,0 6,0 (0) 7,0 (0) 76,0 (50),9 (7.),0 (5.6) 0, (.7) 8, (8.) 6,5 (.5),9 (9.), (8.0),5 (5.5) 9,6 (.) 8, (8.) (.6),6 (6.) 0,8 (5.0) 0, (.5) 8, (8.) 6,8 (5.) 5, (.),6 (6.6) 0,8 (5.0) 9,9 (.) 7,9 (7.6) 6, (.0) (.0),7 (8.8),9 (7.5), (5.0) 9, (0.9) 7,9 (7.6) 5,9 (.), (5.5) 0,5 (.) 9,8 (.8) 8,0 (7.7) 6,5 (.),9 (.7), (9.), (5.7) 0, (.) 9,5 (.) 7,5 (6.7) 5,9 (.), (0.),5 (7.8), (8.),6 (6.7) 0,9 (.) 9, (0.) 7,5 (6.7) 5,6 (.),8 (0.6) 0,8 (.) 0,0 (.) 9, (0.7) 7,5 (6.7) 6,0 (.) (0.7),8 (8.),0 (5.) 0, (.7) 9, (0.9) 7, (6.) 5,7 (.6),0 (9.7), (7.), (7.7), (6.) 0,7 (.9) 8,9 (9.8) 7, (6.) 5, (.9),6 (0.) 0, (.7) 9,8 (.5) (0.) 7, (6.) 5,8 (.9), (0.),6 (7.9) 8,0 (6.) (6.9), (6.0) uffing Jib 5,8 5,9 6,0 6,0 (0), (0) 57,9, (0) 57,9, (0) 57,9, (0) 8,0 (5), (.8) Fixed Jib ength 8, m (60 ft) 8,0 (0) 50,0 (60) 5,0 58,0 6,0 (0) 7,0 (0) 76,0 (50) 8,0 90,0 (00) 9, (.5) 8,9 (0.) 8, (8.8) 7, (6.) 6,5 (.) 5, (.) (9.9) 9,7 (.) 9, (.) 8,8 (9.5) 7,6 (6.9) 6,7 (.8) 5,7 (.) (.6) 9, (.0) (0.7) 7,7 (7.9) 6,7 (5.) 5, (.8), (0.5), (8.) 8,9 (.) 8,5 (9.) 8, (8.0) 7, (5.7) 6, (.8) 5,0 (.8), (9.) 9, (.5) 8,8 (0.) 8, (8.7) 7, (6.) 6, (.) 5, (.5) 5,0 (.) (9.) 9, (0.) 7,7 (7.) 6,7 (.8) 5, (.), (9.8), (7.8) 8,9 (.8) 8,5 (9.5) 8, (8.) 7, (5.9) 6, (.0) (0.9),8 (8.),6 (6.) 9, 8,9 (0.) 8,5 (8.9) 7, (6.) 6,5 (.) 5,6 (.8) 5, (.),7 (8.9) 8,0 8,0 (7.8) 8,0 (7.8) 7,7 (7.) 6, (.8),6 (.),0 (8.8),8 (6.8) (.) 8,5 8, (8.5) 7,7 (7.) 6,8 (5.) 6,0 (.), (0.5),6 (8.0), (5.9) 8,9 8, (9.) 8,0 (7.9) 7,0 (5.6) 6, (.7) 5, (.),9 (0.8),5 (8.),6 (5.0) Meets ANSI B0.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

80 SM CraneCARE 80 Crane CARE is Manitowoc s comprehensive service and support program. It includes classroom and on-site training, prompt parts availability, expert field service, technical support and documentation for every one of the more than 7,000 Manitowoc cranes currently in use throughout the world. That s commitment you won t find anywhere else. That s Crane CARE. Service Training Manitowoc specialists work with you in our training center and in the field to make sure you know how to get maximum performance, reliability, and life from your cranes. Manitowoc Cranes Technical Training Center provides valuable multi-level training, which is available for all models and attachments, in the following format: Basic Provides technicians with the basic skills required in our evel I and II classes covering hydraulic and electrical theory and schematics, pump, motor, control, and MI operation, and the use of meters and gauges. evel This model-specific class covers theory and offers hands-on training and trouble shooting for all crane systems. evel This model-specific class provides in depth coverage of all crane systems and components, and advanced troubleshooting of simulated faults. (Requires evel.) evel /Master Covering all EPIC models and the 00W, this class stresses high level system knowledge and trouble shooting of simulated faults. (Requires evel.) Parts Availability Field Service Factory-trained service experts are always ready to help maintain your crane s peak performance. For a worldwide listing of dealer locations, please consult our website at: Technical Support Manitowoc s dealer network and factory personnel are available hours a day, 7 days a week, 65 days a year to answer your technical questions and more, with the help of computerized programs that simplify crane selection, lift planning, and ground-bearing calculations. For a worldwide listing of dealer locations, please consult our website at: Technical Documentation Technical documentation for is available as follows: Crane Operator s Manual Part No Crane Parts Manual Part No Capacity Chart Manual Part No Crane Vendor Manual Part No Cap Charts Cab Part No Maintenance Checks and ube andbook Part No Attachments Capacity Chart Manual Part No Attachments Cap Charts Cab Part No uffing Jib Operator s Manual Part No uffing Jib Parts Manual Part No MI Operation andbook Part No Service Manual (EPIC) Part No Genuine Manitowoc replacement parts are accessible through your distributor hours a day, 7 days a week, 65 days a year. Service Interval Kits for 00 hours, 000 hours, 000 hours and hydraulic filter. Provides all the parts required by Manitowoc s Preventative Maintenance Checklist. Please contact you local dealer or Crane CARE representative for further information on available parts and kits. CD rom versions of the Operator s and Parts Manuals are shipped with each crane. Available from your Authorized Manitowoc Cranes Distributor, the following videos are available in VS, CD and DVD formats. Model 999 Assembly Video Part No Model 999 Operation Video Part No Model 999 ubrication Video

81 SM CraneCARE Part No Your Capacity Chart Video Part No Respect the imits Video Part No Crane Safety Video Part No Inspection/Repair Video Part No Sales Support Documentation Sales documentation for is available as follows: Ground Bearing Pressure Estimator CD -Part No EPIC Crane ibrary CD -Part No consisting of capacity charts, range diagrams, wire rope specifications, travel specifications, crane weights, counterweight arrangements, luffing jib raising procedures, operating range diagrams, drum and lagging charts, boom rigging drawings, jib rigging drawings, outline dimensions, and wind condition charts. Crane CARE Package Manitowoc has assembled all of the available literature, CD s, and videos listed above plus several Manitowoc premiums into one complete Crane CARE Package.

82 notes 8

83 Americas Region Manitowoc Telephone Number: Fax Number: Address: 0 S. 0th Street, Manitowoc, WI 50 USA Grove, National, Manlift, Potain Telephone Number: Fax Number: Address: 565 Buchanan Trail East, Shady Grove, PA 756 USA Manitowoc Crane Group - Brazil Telephone Number: (55) 8 7 Fax Number: (55) 8 70 Address: Edificio: Itaim Office Tower Rua Gomes de Carvalho, 58 - andar cj 05 / 06 Vila Olimpia - SP - Cep: Brasil Grove - Mexico Fax Number: (58) 8-08 Fax Number: (58) 8-09 Address: Miravalle Center, piso PB, Suite 06 Calz San Pedro 50 Nte. Monterrey, Nuevo eon Mexico EMEA Region Grove RT & Manitowoc Telephone number: Fax number: Address: Akeler ouse, Emperor Way Doxford International Business park Sunderland, England SR XR Grove GMK Telephone Number: Fax number: Address: Industriegelände West 689 Wilhelmshaven Postfach 85, Germany Potain Telephone number: Fax number: Address: 8 Chemin de Charbonnières 690 Ecully, France Manlift France Telephone Number: + (0) Fax number: + (0) Address: Delta Manlift ZI de Fauillet BP 0 F-700 Tonneins, France Manlift Germany Telephone Number: + 9 (0) Fax number: + 9 (0) Address: iftlux Potain Gmb Service und Ersatzteilzentrum eidigstrasse 7 D Kronau, Germany Asia/Pacific Region Singapore Manitowoc Crane Group Asia PTE TD Telephone Number: Fax Number: (Sales/Admin) (Parts/Service) Address: 6 Benoi Road Singapore, Singapore China Zhangjizgang Potain Constr. Machinery PTE TD Telephone Number: Fax number: Address: Wenxingqiaonan oucheng Zhangjiagang, Jiangsu 56 P R China Manitowoc Crane Group Asia Shanghai Office Telephone number: Fax number: Address: RM. D-05 Shanghai-Mira Commercial Centre No.6, West Yanan Rd Shanghai, PR China Post Code 006 Manitowoc Crane Group Asia Shanghai Operations Office Telephone Number: Fax number: Address: Rm0, #9 Zhongshan West Road ongqiao Silver Tower Shanghai 0005, P R China Australia Manitowoc Crane Group Australia Grove Australia PTY TD - Melbourne Office Telephone Number: Fax number: Address: / Disney Avenue, East Keilor VIC 0 Australia Grove Australia PTY TD - Sydney Office Telephone Number: Fax number: Address: /57 Prince William Drive Seven ills NSW 7 Australia Korea Manitowoc Crane Group Korea CO TD Telephone Number: Fax number: Address: Room 0 Gugu Building #5-8 Samsung-Dong, Kangnam-Ku Seoul 5878 Korea Philippines Potain Inc. Telephone Number: Fax number: Address: G/F Southwest Centre Building cor Makiling Street South Super ighway Palanan, Makati City Philippines PRODUCT IMPROVEMENTS MAY CANGE SPECIFICATIONS 005 MANITOWOC PG-A-E-500 PRODUCT IMPROVEMENTS MAY CANGE SPECIFICATIONS 00 MANITOWOC / PG-US-E