INDEX PTO PARTS AND COMPONENTS

Transcription

1 PTO PARTS AND COMPONENTS INDEX 0675 Series Parts - North American FR Series - Cross Kit Series Parts - Metric , 8-56, Series Parts - Metric , Series - Cross Reference Series Parts - North American , Series Parts - North American , 8-25, Series - Cross Kit Series Parts - North American , 8-28, Series - Cross Kit Series Parts - Metric , 8-59, /00 Series Parts - Metric , /720 Series Parts - Metric...8-9, /200 Series Parts - Metric , /20 Series Parts - Metric , CV Parts - Metric...8-2, Series Parts - Metric , CV Drivelines - Metric CV Parts - Metric , Series Parts - Metric , CV Drivelines - Metric CV Parts - Metric , Series Parts - Metric , 8-95, DR Series - Cross Kit Series Parts - Metric...8-6, 8-62, /4 Series Parts - CV , Series - Cross Kit Series Parts - North American , 8-3, 8-32, Series Parts - Metric , 8-65, /35 Series Drivelines - CV /35 Series Parts - CV Series Parts - North American , 8-35, Series Parts - Metric , 8-68, /35/44 Series Drivelines - CV /35/44 Series Parts - CV , Series Parts - North American , 8-38, Series Parts - Metric , 8-7, Series Parts - North American..8-20, 8-2, 8-22, /55 Series Drivelines - CV /55 Series Parts - CV , 8-8 7N Series Parts - Metric , 8-74, Series Parts - Metric , 8-77, Series Parts - Metric , 8-80 AB Series Parts - Metric , 8-56, 8-57 AB2 Series Parts - Metric , 8-59, 8-60 AB3 Series Parts - Metric...8-6, 8-62, 8-63 AB4 Series Parts - Metric , 8-65, 8-66 AB5 Series Parts - Metric , 8-68, 8-69 AB6 Series Parts - Metric , 8-7, 8-72 AB7N Series Parts - Metric , 8-74, 8-75 AB8N Series Parts - Metric , 8-77, 8-78 AB9 Series Parts - Metric , 8-80 Adaptors - PTO , 8-54 Adaptors - Pump Drive , 8-64 Adaptors - Weld On Assembly - Cross Kit Assembly - U-Joint AW0 Series Parts - Metric , 8-84 AW Series Parts - Metric , 8-88 AW2 Series Parts - Metric , 8-00 AW20 Series Parts - Metric , 8-86 AW2 Series Parts - Metric , 8-90 AW22 Series Parts - Metric , 8-92 AW26 Series Parts - Metric , 8-98 AW35 Series Parts - Metric , 8-94 AW36 Series Parts - Metric , 8-96 Baler Drivelines - CV , 8-30 Bearing Kits - Easy Lock , 8-, 8-2 Bearing Kits - Old Style Bondioli - Cross Kit Bondioli Tube - Dimensions Clutch - Friction , 8-46 Clutch - Overrunning Clutch - Shearbolt

2 PTO PARTS AND COMPONENTS INDEX Clutch - Starter Kits Clutch - Torquemaster Clutch - Torquemaster Assy Clutch - Torquemaster Features Clutch Parts - Torquemaster..8-4, 8-42, 8-43, 8-44 Combine - Driveline Complete - Universal Joints Cones - Safety Couplers - Overrunning Couplers - Splined Coupling - Spider Cross & Bearing - E-Kits Cross Kit - FR Series Cross Kit - 4 Series Cross Kit Series Cross Kit - 3 DR Series Cross Kit - 35 Series Cross Kit - Assembly Cross Kit - Bondioli Cross Kit - Cross Over Chart Cross Kit - Dimensions , 8-52 Cross Kit - Grease Cross Kit - Horsepower Cross Kit - Quick Reference Cross Kit - Replacement Cross Kit - Vehicular Cross Kit - Walterscheid Cross Over Chart - Cross Kit Cross Over Chart - Driveline Cross Reference Series CV 50 - Driveline Parts , 8-20 CV 80-3/4 Series Parts... 8-, 8-2 CV 80-4/35 Series Drivelines CV 80-4/35 Series Parts CV 80-5/35/44 Series Drivelines CV 80-5/35/44 Series Parts...8-5, 8-6 CV 80-6/55 Series Drivelines CV 80-6/55 Series Parts...8-7, 8-8 CV 80 - Baler Drivelines , 8-30 CV 80 - Driveline Baler CV 80 - Information CV 80 Sizes - Driveline CV Joints - Wide Angle Decals - Safety Dimensions - Bondioli Tube Dimensions - Cross Kit...8-6, 8-52 Dimensions - Lemon Tube Dimensions - Spline Dimensions - Star Tube Dimensions - Triangle Tube Dimensions - Walterscheid Tube Disc - Flexible Display - E-Kits...8-6, 8-49 Display - Metric Display - North American , 8-5 Driveline - Combine Driveline - Cross Over Chart Driveline - CV 80 Sizes Driveline - Equivalent Chart Driveline - Flex Wing Cutters Driveline Baler - CV Driveline Parts - CV , 8-20 Easy Lock - Bearing Kits , 8-, 8-2 Easy Lock - Guards...8-0, 8- Easy Lock - Safety E-Kits - Cross & Bearing E-Kits - Display...8-6, 8-49 E-Kits - Metric E-Kits - North American Equivalent Chart - Driveline Explanation Inch - Part Number Explanation Metric - Part Number Flex Wing Cutters - Driveline Flexible - Disc

3 PTO PARTS AND COMPONENTS INDEX Friction - Clutch , 8-46 Friction Clutch Parts - Metric Gear Boxes - Hub City German - Shafting Grease - Cross Kit Grease - Interval , 8-4 Grease - Safety Guards - Easy Lock , 8- Guards - Metric...8- Guards - North American Horsepower - Cross Kit Hub City - Gear Boxes Hub City - PTO to 8-64 I Series Parts - Metric , 8-88 II Series Parts - Metric , 8-00 Identification - Transparency Inch Identification - Transparency Metric Information - CV Interchange - Metric Interval - Grease , 8-4 Italian - Shafting Lemon Tube - Dimensions Locking Device - Pins Locking Device - Repair Kit , 8-06 Manual - Safety...8- Metric - Series Parts , 8-56, 8-57 Metric - 0 Series Parts , 8-82 Metric - 2 Series Parts , 8-59, 8-60 Metric - 200/00 Series Parts , 8-84 Metric - 220/720 Series Parts , 8-92 Metric /200 Series Parts , 8-86 Metric /20 Series Parts , 8-90 Metric CV Parts , 8-22 Metric Series Parts , 8-94 Metric CV Drivelines Metric CV Parts , 8-24 Metric Series Parts , 8-96 Metric CV Drivelines Metric CV Parts , 8-25 Metric Series Parts Metric Series Parts , 8-98 Metric - 3 Series Parts , 8-62, 8-63 Metric - 4 Series Parts...64, 65, 66 Metric - 5 Series Parts , 8-68, 8-69 Metric - 6 Series Parts , 8-7, 8-72 Metric - 7N Series Parts , 8-74, 8-75 Metric - 8 Series Parts , 8-77, 8-78 Metric - 9 Series Parts , 8-80 Metric - AB Series Parts , 8-56, 8-57 Metric - AB2 Series Parts , 8-59, 8-60 Metric - AB3 Series Parts , 8-62, 8-63 Metric - AB4 Series Parts , 8-65, 8-66 Metric - AB5 Series Parts , 8-68, 8-69 Metric - AB6 Series Parts , 8-7, 8-72 Metric - AB7N Series Parts , 8-74, 8-75 Metric - AB8N Series Parts , 8-77, 8-78 Metric - AB9 Series Parts , 8-80 Metric - AW0 Series Parts , 8-84 Metric - AW Series Parts , 8-88 Metric - AW2 Series Parts , 8-00 Metric - AW20 Series Parts , 8-86 Metric - AW2 Series Parts , 8-90 Metric - AW22 Series Parts , 8-92 Metric - AW26 Series Parts , 8-98 Metric - AW35 Series Parts , 8-94 Metric - AW36 Series Parts , 8-96 Metric - Display Metric - E-Kits Metric - Friction Clutch Parts Metric - Guards...8- Metric - I Series Parts , 8-88 Metric - II Series Parts , 8-00 Metric - Interchange Metric - Profile Shafting...8-9

4 PTO PARTS AND COMPONENTS INDEX Metric - Profile Tubing Metric - Replacement CV Driveline Metric - Replacement Driveline , 8-04 Metric Profile - Shafting and Tubing North American Series Parts North American Series Parts , 8-44 North American - 2 Series Parts , 8-25, 8-26 North American - 4 Series Parts , 8-28, 8-29 North American - 35 Series Parts , 8-3, 8-32, 8-33 North American - 44 Series Parts , 8-35, 8-36 North American - 55 Series Parts , 8-38, 8-39 North American - 6 Series Parts. 8-20, 8-2, 8-22, 8-23 North American - Display , 8-5 North American - E-Kits North American - Guards North American - Replacement CV Driveline North American - Shafting and Tubing North American - Shafts North American - Tubing North American - W Series Parts , 8-4 Nylon Bearings - Repair Kit Old Style - Bearing Kits Overrunning - Clutch Overrunning - Couplers Part Number - Explanation Inch Part Number - Explanation Metric Pins - Locking Device Pins - Spiral Profile Shafting - Metric Profile Tubing - Metric PTO - Adaptors , 8-54 PTO - Hub City to 8-64 PTO - Sleeves Pump Drive - Adaptors , 8-64 QD Metric - Repair Kit Quick Disconnect - Repair Kit Quick Reference - Cross Kit Repair Kit - Locking Device , 8-06 Repair Kit - Nylon Bearings Repair Kit - QD Metric Repair Kit - Quick Disconnect Replacement - Cross Kit Replacement - U-Joint Replacement CV Driveline - Metric Replacement CV Driveline - North American Replacement Drivelines - Metric , 8-04 Safety - Cones Safety - Decals...8- Safety - Easy Lock Safety - Grease Safety - Manual...8- Safety - Section...8- Section - Safety...8- Selection Guide - Torquemaster , 8-37 Shafting - German Shafting - Italian Shafting and Tubing - Metric Profile Shafting and Tubing - North American Shafts - North American Shafts - Splined Shearbolt - Clutch Sleeves - PTO Spider - Coupling Spiral - Pins Spline - Dimensions Splined - Couplers Splined - Shafts Star Tube - Dimensions Starter Kits - Clutch Torquemaster - Clutch Torquemaster - Clutch Parts to 8-44 Torquemaster - Selection Guide , 8-37 Torquemaster Assy - Clutch Torquemaster Features - Clutch

5 PTO PARTS AND COMPONENTS INDEX Transparency Inch - Identification Transparency Metric - Identification Triangle Tube - Dimensions Tubing - North American U-Joint - Assembly U-Joint - Replacement Universal Joints - Complete Vehicular - Cross Kit W Series Parts - North American , 8-4 Walterscheid - Cross Kit Walterscheid Tube - Dimensions Weld On - Adaptors Wide Angle - CV Joints

6 PTO PARTS AND COMPONENTS DRIVELINE SAFETY THE SAFETY OF THE END USER DEPENDS UPON PROPER USE AND MAINTENANCE OF THE IMPLEMENT TRACTOR, AND DRIVELINE, PLUS ALL RELATED SAFETY SHIELDING. INFORMATION REGARDING CORRECT DRIVELINE USAGE IS INCLUDED ON THE SAFETY LABEL. Use the implement only with a driveline which is compatible in length, power capacity, torque limiters or overrunning clutches, and shielding. The driveline and its torque limiter or overrunning clutch should only be used for their intended purposes. Ensure that all driveline, tractor and implement shields are functional and in place before operation. Damages or missing components must be replaced with spare parts, correctly installed, before using the driveline. Ensure that the driveline is securely attached to the tractor and the implement before operating. Disengage the PTO, turn off the tractor engine and remove key before approaching the implement or performing maintenance work. When used at night or in poor visibility, illuminate the driveline operating area during installation. Keep the driveline horizontal during handling to prevent the halves from sliding apart, which could cause injury or damage the shielding. Do not wear loose clothing, jewelry, hair, or anything which could get caught in the machine. Contact with rotating parts could cause serious injury or death. Always hitch the tractor to STA- TIONARY MACHINERY (pumps, elevators, generators, driers, etc.) so that the telescoping tubes overlap by at least /3 of their length.

7 PTO PARTS AND COMPONENTS WORKING CONDITIONS When operating, ensure that joining angles are equal. Disengage the PTO when the angle of the joints exceeds 35. Do not stand on the driveline. Do not step over, or go under the driveline. Contact with a rotating driveline could cause serious injury or death. CONSTANT VELOCITY JOINTS may operate at angles up to depending upon type, but only for brief periods (for example during turns) and never continuously. Installing the Driveline: Clean and grease the tractor PTO and implement shaft before installing the driveline. Attach the safety chains, allowing sufficient slack for the driveline during turns, operation, and transport. The tractor printed on the shield indicated the tractor end of the driveline. Any torque limiter or overrunning clutch must be installed on the implement end. Never use the safety chains to support the driveline for storage. Always use the support on the implement.

8 PTO PARTS AND COMPONENTS 8- SAFETY SECTION WARNING! Be certain to disengage PTO shaft and to turn off the tractor before making any operational maintenance inspections or repairs. Keep clear of the machine until all parts have stopped moving. NEVER operate an implement with driveline guards missing or in a damaged condition. Guards must rotate freely on the yokes. SAFETY DECALS IMPORTANT CHECK THAT GUARD MISSING DECAL ON STEEL TUBE UNDER INNER GUARD AND ROTATING DRIVELINE DECAL ON OUTER GUARD ARE FIRMLY AFFIXED, UNDAMAGED AND READABLE - IF NOT, REPLACE. GUARDS MUST ROTATE FREELY ON YOKES. FOR USE ON IMPLEMENT END ONLY PTO PTO 3002 ALL CLUTCHES MUST BE USED ON THE IMPLEMENT END ONLY. Yellow decal is provided on clutch. SAFETY MANUAL The Agriculture Driveline Manufacturers Association (ADMA) has printed a Safety Manual for owners and operators of agricultural machinery. PTO 56523

9 8-2 PTO PARTS AND COMPONENTS EASY LOCK GUARD SYSTEM SAFETY SECTION Instructions for Removal and Installation of Easy Lock Guards Clean and grease bearing raceway before the nylon bearing is placed in the groove. Grease any remaining nylon bearings in guard. Slide guard half over driveline and insert nylon bearing tabs into the openings in the guard. 5 Turn the nylon bearing until it engages into the guard. Push Easy Lock clip into position. The nylon bearing and guard are now secure. Guards must rotate freely on yokes. To Remove Guard - Use screwdriver to release Easy Lock clip. Turn the nylon bearings to disengage from the guard and remove guard.

10 PTO PARTS AND COMPONENTS 8-3 GREASING RECOMMENDATIONS SAFETY SECTION Telescoping Drivelines Be certain to follow greasing instructions as identified below: Lubricate all fittings with a good quality lithium soap compatible E.P. grease meeting the N.L.G.I. #2 specifications and containing no more than % molybdenum disulfide. An E.P. grease meeting the N.L.G.I. #2 specifications and containing 3% molybdenum disulfide may be substituted in the telescoping members only. LUBE RECOMMENDATIONS INTERVAL LOCATION AMOUNT 50 HRS Extended lube cross & bearing (orange seals not visible) 2-3 Lever action pumps 8 HRS* Standard cross & bearings (black seals) 2-3 Lever action pumps 8 HRS Telescoping members (50 hrs. hardened spline) 8-0 Lever action pumps 50 HRS** CE & non-rotating guard bushings (000 RPM max.) 2 Lever action pumps Constant angle applications may require a lube interval of 4 hours. High speed may require a lube interval of 8 hours. 80 Constant Velocity Drivelines CAUTION!! REPLACEMENT PARTS ARE NOT LUBRICATED. Lubricate all fittings with a good quality lithium soap compatible E.P. grease meeting the N.L.G.I. #2 specifications and containing no more than % molybdenum disulfide. An E.P. grease meeting the N.L.G.I. #2 specifications and containing 3% molybdenum disulfide may be substituted in the telescoping members only. LUBE RECOMMENDATIONS INTERVAL LOCATION AMOUNT 50 HRS Extended lube cross & bearings (orange seals not visible) 2-3 Lever action pumps 8 HRS* Standard cross & bearings (black seals) 2-3 Lever action pumps 8 HRS Telescoping members (50 hrs hardened spline) 8-0 Lever action pumps 8 HRS* CV ball & socket 4-6 Lever action pumps 24 HRS CV center housing 2-5 Lever action pumps 50 HRS** CE & non-rotating guard bushings (000 RPM max.) 2 Lever action pumps** Constant angle applications may require a lube interval of 4 hours. High speed may require a lube interval of 8 hours. CAUTION!! REPLACEMENT PARTS ARE NOT LUBRICATED.

11 8-4 PTO PARTS AND COMPONENTS GREASING RECOMMENDATIONS SAFETY SECTION 50 Constant Velocity Drivelines Lubricate all fittings with a good quality lithium soap compatible E.P. grease meeting the N.L.G.I. #2 specifications and containing no more than % molybdenum disulfide. An E.P. grease meeting the N.L.G.I. #2 specifications and containing 3% molybdenum disulfide may be substituted in the telescoping members only. LUBE RECOMMENDATIONS INTERVAL LOCATION AMOUNT 50 HRS Extended lube cross & bearings (orange seals not visible) 2-3 Lever action pumps 8 HRS* Standard cross & bearings (black seals) 2-3 Lever action pumps 8 HRS Telescoping members (50 hrs hardened spline) 8-0 Lever action pumps 8 HRS* CV ball & socket 4-6 Lever action pumps 50 HRS** CE & non-rotating guard bushings (000 RPM max) 2 Lever action pumps** Constant angle applications may require a lube interval of 4 hours. High speed may require a lube interval of 8 hours. CAUTION!! REPLACEMENT PARTS ARE NOT LUBRICATED. REPLACEMENT PARTS MUST BE LUBRICATED AT TIME OF ASSEMBLY AND DURING USE PER THE LUBE RECOMMENDATIONS. Greasing Recommendations for Cross & Bearing Kits Standard Cross & Bearing Kits (R-Kits) = 8 Hours. Extended Lubrication Cross & Bearing Kits (E-Kits) = Hours.

12 PTO PARTS AND COMPONENTS 8-5 CROSS REFERENCE CHART QUICK REFERENCE SECTION North American Components CROSS & BRG KIT WEASLER AFTMKT. U-JOINT SERIES WEASLER U-JOINT SERIES APC/WESCO U-JOINT SERIES CHAINBELT U-JOINT SERIES G&G U-JOINT SERIES NEAPCO U-JOINT SERIES ROCKWELL U-JOINT SERIES PTO FR - PTO DR - PTO L6W/6RW 6N 6R SPICER U-JOINT SERIES - 6N L600 L6N - PTO PTO W PTO PTO PTO RW 2R 4R/GN 4NW 2N R2N R3N/20 2N 200 L2N 40 4N R4N/40 4N 2000 L4N 240 PTO PTO PTO RW/35R DN/35NW 35N R35N/350 35N N 340 PTO R 44N 440 4R 44R 44R 440 PTO Metric Components L55/55NW 55R N - 55N - CROSS & BEARING R-KIT CROSS & BEARING E-KIT INTERCHANGES WITH BONDIOLI & PAVESI SERIES INTERCHANGES WITH WALTERSCHEID SERIES PTO PTO N/A PTO PTO N/A PTO PTO N N/A PTO PTO N/A PTO PTO N/A PTO PTO N/A 2600 PTO PTO N/A 200 PTO PTO N/A 2400 PTO N/A II N/A PTO PTO N/A 2500 PTO PTO PTO PTO I PTO PTO PTO PTO PTO PTO (Old Series) 230 PTO PTO N/A 2280 PTO PTO N/A 2380 PTO PTO N/A 2480 PTO PTO N/A 2580

13 8-6 PTO PARTS AND COMPONENTS QUICK REFERENCE FOR CROSS & BEARING KITS A North American (R) Snap Ring located in the bushing (internal) (E) SERIES B (R) KIT RATED 540 RPM Snap Ring located in the yoke (external) (E) KIT RATED 540 RPM (R) KIT RATED 000 RPM R= E= (E) KIT RATED 000 RPM BEARING DIAMETER QUICK REFERENCE SECTION Regular Cross & Bearing Kit Extended Lube Cross & Bearing Kit CAP TO CAP OVERALL PTO N/A Rockwell FR N/A N/A N/A N/A 7 /8" 2 5 /6" B 56 PTO N/A Rockwell 3DR N/A N/A N/A N/A " 3 5 /6" B 56 PTO PTO /32" 2 5 /6" A 22 PTO N/A N/A 24 N/A 5 /6" 2 5 /6" A 52 PTO N/A W N/A N/A N/A N/A 9 /6" /2" Pin & Block 50 PTO N/A N/A 24 N/A 5 /6" 2 9 /32" A 53 PTO PTO /6" 2 /2" A 27 PTO PTO /8" 2 5 /8" B 32 PTO N/A N/A 48 N/A " 3 7 /6" A 56 PTO N/A N/A 44 N/A 3 /8" 4 3 /6" B 57 PTO PTO /4" 3 7 /32" B 36 PTO PTO /6" 4" A 42 PTO PTO /32" 4 5 /6" B 47 SNAP RING TYPE PG. NO. Italian Series (R) (E) SERIES (R) KIT RATED 540 RPM (E) KIT RATED 540 RPM (R) KIT RATED 000 RPM (E) KIT RATED 000 RPM BEARING DIAMETER CAP TO CAP OVERALL PTO PTO mm 54.0 mm B 66 PTO PTO mm 6.2 mm B 69 PTO PTO mm 70.0 mm B 72 PTO PTO mm 74.6 mm B 75 PTO PTO mm 79.6 mm B 78 PTO PTO mm 92.0 mm B 82 PTO PTO N mm 94.0 mm B 84 PTO PTO mm 06.5 mm B 87 PTO PTO mm 08.0 mm B 90 SNAP RING TYPE PG. NO. German Series (R) (E) SERIES (R) KIT RATED 540 RPM (E) KIT RATED 540 RPM (R) KIT RATED 000 RPM (E) KIT RATED 000 RPM BEARING DIAMETER CAP TO CAP OVERALL PTO PTO mm 54.8 mm B 93 PTO PTO mm 6.2 mm B 95 PTO PTO I mm 70.0 mm B 97 PTO PTO mm 74.6 mm B 99 PTO PTO mm 92.0 mm B 02 PTO PTO mm 76.0 mm B 04 PTO PTO mm 88.8 mm B 07 PTO PTO mm 04.0 mm B 0 SNAP RING TYPE PG. NO.

14 PTO PARTS AND COMPONENTS 8-7 UNIVERSAL JOINT REPLACEMENT QUICK REFERENCE SECTION To Disassemble Universal Joint. Remove all snap rings. To Reassemble Universal Joint

15 8-8 PTO PARTS AND COMPONENTS NORTH AMERICAN SHAFTING AND TUBING QUICK REFERENCE SECTION North American Shaft North American Tube SIZE PTO /4" Sq. 6' PTO /8" Sq. 6' PTO /6" Sq. 6' PTO " Sq. 6' PTO /6" Sq. 6' PTO /4" Sq. 6' PTO /6" Sq. 6' PTO /4" x 7 /8" Rect. 6' PTO " x /8" Rect. 6' PTO /6" Sq. 0' PTO /6" Sq. 0' PTO /4" x 7 /8" Rect. 0' PTO 4068 " x /8" Rect. 0' PTO /8" Hex 6' PTO " Hex 6' PTO /8" Hex 6' PTO /6" Sq. 3' PTO ¼" Hex 6' PTO /6" Sq. 3' PTO /4" x 7 /8" Rect. 3' PTO 40465H " x 5 Spl. 3' PTO " x /8" Rect. 3' PTO /6" x 20 Spl. 3' PTO /6" x 20 Spl. 3' SIZE PTO " Sq. 6' PTO /4" Sq. (.20 wall) 6' PTO /4" Sq. (.09 wall) 6' PTO /8" Sq. 6' PTO /4" x 7 /8" Rect. 6' PTO /4" x 3 /8" Rect. 6' PTO /4" x 7 /8" Rect. 0' PTO /4" x 3 /8" Rect. 0' PTO /2" Rd. 6' PTO " Rd. (.083 wall) 6' PTO /4" Rd. (.09 wall) 6' PTO /8" Rd. (.20 wall) 6' PTO /8" Rd. (.083 wall) 6' PTO /2" Rd. (.20 wall) 6' PTO " Rd. (.083 wall) 0' PTO /8" Rd. (.20 wall) 0' PTO /2" Rd. (.20 wall) 0' PTO /2" Rd. 3' PTO /4" x 7 /8" Rect. 3' PTO /4" x 3 /8" Rect. 3' PTO /8" Rd. (.20 wall) 3' PTO /2" Rd. (.20 wall) 3'

16 PTO PARTS AND COMPONENTS 8-9 METRIC PROFILE SHAFTING AND TUBING QUICK REFERENCE SECTION SERIES METERS INCHES USE AS ByPy PTO /6" Inner ByPy PTO /6" Inner ByPy PTO /8" Inner ByPy PTO /6" Outer ByPy PTO /6" Outer ByPy PTO /8" Outer ByPy 2 PTO /6" Inner ByPy 2 PTO /6" Inner ByPy 2 PTO /8" Inner ByPy 2 PTO /6" Outer ByPy 2 PTO /6" Outer ByPy 2 PTO /8" Outer ByPy 3 PTO /6" Inner ByPy 3 PTO /6" Inner ByPy 3 PTO /8" Inner ByPy 3 & 4 PTO /6" Outer ByPy 3 & 4 PTO /6" Outer ByPy 3 & 4 PTO /8" Outer ByPy 4 PTO /6" Inner ByPy 4 PTO /6" Inner ByPy 4 PTO /8" Inner ByPy 5 & 6 PTO /6" Inner ByPy 5 & 6 PTO /6" Inner ByPy 5 & 6 PTO /8" Inner ByPy 5 PTO /6" Outer ByPy 5 PTO /6" Outer ByPy 5 PTO /8" Outer ByPy 6, 7N & 8 PTO /6" Outer ByPy 6, 7N & 8 PTO /6" Outer ByPy 6, 7N & 8 PTO /8" Outer ByPy 7N PTO /6" Inner ByPy 7N PTO /6" Inner ByPy 7N PTO /8" Inner ByPy 9 PTO /6" Inner ByPy 9 PTO /6" Inner ByPy 9 PTO /8" Inner ByPy 8 & 9 PTO /6" Outer ByPy 8 & 9 PTO /6" Outer ByPy 8 & 9 PTO /8" Outer W/S 200 PTO /6" Inner W/S 200 PTO /6" Inner W/S 200 PTO /8" Inner W/S 200 PTO /6" Outer W/S 200 PTO /6" Outer W/S 200 PTO /8" Outer W/S I & 2200 PTO /6" Inner W/S I & 2200 PTO /6" Inner W/S I & 2200 PTO /8" Inner W/S I & 2200 PTO /6" Outer SERIES METERS INCHES USE AS W/S I & 2200 PTO /6" Outer W/S I & 2200 PTO /8" Outer W/S 2400 (lemon) PTO /6" Inner W/S 2400 (lemon) PTO /6" Inner W/S 2400 (lemon) PTO /8" Inner W/S 2400 (lemon) PTO /6" Outer W/S 2400 (lemon) PTO /6" Outer W/S 2400 (lemon) PTO /8" Outer W/S 2400 & 2500 (star) PTO /6" Inner W/S 2400 & 2500 (star) PTO /6" Inner W/S 2400 & 2500 (star) PTO /8" Inner AW36 (star) PTO /6" Outer AW36 (star) PTO /6" Outer AW36 (star) PTO /8" Outer AW26 (star) PTO /6" Inner AW26 (star) PTO /6" Inner AW26 (star) PTO /8" Inner AW26 (star) PTO /6" Outer AW26 (star) PTO /6" Outer AW26 (star) PTO /8" Outer German-Style Shafting & Tubing Lemon & Star Profile Italian-Style Shafting & Tubing Tri-Lobe Profile

17 8-0 PTO PARTS AND COMPONENTS EASY LOCK GUARDING SYSTEM QUICK REFERENCE SECTION North American SERIES 6 OLD GUARDS OLD NYLON BEARING KITS NEW GUARDS NEW NYLON BEARING KITS PTO PTO / PTO 9204P5 PTO PTO PTO PTO / PTO 9204P5 PTO PTO W PTO PTO PTO PTO PTO PTO / PTO 9204P6 PTO PTO PTO PTO / PTO 9204P6 PTO PTO PTO PTO / PTO PTO PTO PTO PTO / PTO PTO PTO PTO PTO / PTO PTO PTO PTO PTO / PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PLEASE NOTE! Not all guard and nylon bearing systems are interchangeable. When purchasing shaft weld and tube weld yokes or guards, make certain there is a proper fit between nylon bearing raceway in yoke and guard. Make sure guard rotates freely on the yokes. The nylon bearings provided are the most popular in the replacement market. If the nylon bearing provided is not a proper fit, it is essential that the proper nylon bearing is identified to insure proper performance and safety. To assist in ordering the proper nylon bearing, listed in this brochure are stock numbers and dimensions for nylon bearings. All Series North American guards are provided without nylon bearings. To help assure the proper set of nylon bearings are installed, one nylon bearing set will be exactly the same (nylon bearing raceway dimensions) as has always been provided in our aftermarket guards. The other set will be dimensioned to retrofit the Weasler OEM raceway. Assembly instructions included with these nylon bearing kits. ALL GUARDS ARE PROVIDED WITHOUT NYLON BEARINGS - ORDER NYLON BEARINGS SEPARATELY.

18 PTO PARTS AND COMPONENTS 8- EASY LOCK GUARDING SYSTEM QUICK REFERENCE SECTION INTERCHANGES WITH SERIES ByPy ByPy 2 ByPy 3 & 4 ByPy 5 ByPy 6 ByPy 7 ByPy 8 & 9 W/S 200 (AW0) W/S 2200 (AW20) & W/S I (AWII) W/S 2300 (AW2) W/S 220 (AW22), W/S 2400 (AW35) & W/S 2500 (AW36) W/S 2600 (AW26) OLD GUARDS OLD NYLON BEARING KITS NEW GUARDS NEW NYLON BEARING KITS PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO

19 8-2 PTO PARTS AND COMPONENTS EASY LOCK GUARDING SYSTEM QUICK REFERENCE SECTION Nylon Bearing Repair Kits TYPE A - FITS 250 GUARDS SERIES GUARD TYPE SERIES GUARD TYPE NORTH AMERICAN SERIES DIM A INNER BRG ID NORTH AMERICAN SERIES DIM A INNER BRG ID DIM B INNER BRG OD DIM B INNER BRG OD DIM A OUTER BRG ID DIM A OUTER BRG ID DIM B OUTER BRG OD PTO mm (.83") 7.4 mm (2.8") 46.4 mm (.83") 7.4 mm (2.8") PTO , 4 & mm (2.08") 7.4 mm (2.8") 52.8 mm (2.08") 7.4 mm (2.8") PTO W mm (.65") 7.4 mm (2.8") 4.8 mm (.65") 7.4 mm (2.8") SERIES GUARD TYPE METRIC SERIES DIM A INNER BRG ID DIM B INNER BRG OD DIM A OUTER BRG ID DIM A2 OUTER BRG OD PTO ByPy mm (.36") 7.4 mm (2.8") 40.4 mm (.59") 7.4 mm (2.8") PTO ByPy mm (.59") 7.4 mm (2.8") 47.4 mm (.87") 7.4 mm (2.8") PTO ByPy 3 & mm (.87") 7.4 mm (2.8") 53.4 mm (2.0") 7.4 mm (2.8") PTO W/S mm (.63") 7.4 mm (2.8") 4.4 mm (.63") 7.4 mm (2.8") PTO W/S 2200, W/S I & W/S mm (2.00") 7.4 mm (2.8") 50.8 mm (2.00") 7.4 mm (2.8") TYPE B - FITS 350/450 GUARDS DIM B OUTER BRG OD PTO & mm (2.65") 83.6 mm (3.29") 67.2 mm (2.65") 83.6 mm (3.29") SERIES GUARD TYPE METRIC SERIES DIM A INNER BRG ID DIM B INNER BRG OD DIM A OUTER BRG ID DIM B OUTER BRG OD PTO ByPy mm (2.") 83.6 mm (3.29") 62.7 mm (2.47") 83.6 mm (3.29") PTO ByPy 6 & mm (2.34") 83.6 mm (3.29") 68.4 mm (2.69") 83.6 mm (3.29") PTO ByPy 8 & mm (2.69") 03 mm (4.06") 80.4 mm (3.7") 03 mm (4.06") PTO W/S 220, W/S 2400 & W/S mm (2.46") 83 mm (3.27") 62.5 mm (2.46") 83 mm (3.27") PTO W/S mm (3.26") 03 mm (4.05") 82.8 mm (3.26") 03 mm (4.05") TYPE C SERIES PREVIOUS-STYLE METRIC NYLON BEARING KIT DIM A INNER BRG ID DIM B INNER BRG OD DIM A OUTER BRG ID DIM B OUTER BRG OD PTO ByPy 34.8 mm (.37") 57 mm (2.24") 40.8 mm (.6") 57 mm (2.24") PTO ByPy mm (.59") 7.4 mm (2.8") 47.4 mm (.87") 7.4 mm (2.8") PTO ByPy 3 & mm (.87") 7.4 mm (2.8") 53.4 mm (2.0") 7.4 mm (2.8") PTO ByPy mm (2.0") 8.7 mm (3.22") 62.7 mm (2.47") 8.7 mm (3.22") PTO ByPy 6 & mm (2.34") 98.8 mm (3.89") 68.4 mm (2.69") 98.8 mm (3.89") PTO ByPy 8 & mm (2.69") 98.8 mm (3.89") 80.4 mm (3.7") 98.8 mm (3.89") PTO W/S mm (.63") 57 mm (2.24") 4.4 mm (.63") 57 mm (2.24") PTO W/S 2200, AW & W/S mm (2.00") 7.4 mm (2.8") 50.8 mm (2.00") 7.4 mm (2.8") PTO W/S 220, W/S 2400 & W/S mm (2.47") 8.7 mm (3.22") 62.7 mm (2.47") 8.7 mm (3.22") PTO W/S mm (3.26") 98.8 mm (3.89") 82.8 mm (3.26") 98.8 mm (3.89")

20 PTO PARTS AND COMPONENTS 8-3 EASY LOCK GUARDING SYSTEM QUICK REFERENCE SECTION Previous-Style North American Nylon Bearing Kit PART NO. DIM A YOKE RACEWAY O.D. NYLON BEARING I.D. DIM B NYLON BEARING O.D. DIM C YOKE RACEWAY WIDTH NYLON BEARING WIDTH PTO " (2 5 /32") 2.76" (2 3 /4").36" ( 23 /64") PTO " ( 49 /64") 2.76" (2 3 /4").36" ( 23 /64") PTO " (2 /64") 2.76" (2 3 /4").36" ( 23 /64") PTO " ( 3 /32") 2.02" (2 /64").30" ( 9 /64") PTO " ( 2 /32") 2.76" (2 3 /4").36" ( 23 /64") PTO " (2 5 /32") 3.26" (3 7 /64").36" ( 23 /64") PTO " ( 25 /32") 2.52" (2 33 /64").37" ( 3 /8") PTO "( 4 /64") 2.25" (2 /4").29" ( 9 /64") PTO " (2 /32") 3.26" (3 7 /64").36" ( 23 /64") PTO " ( 25 /64") 2.77" (2 49 /64").36" ( 23 /64") PTO " ( 53 /64") 2.76" (2 3 /4").25" ( /4") PTO " (2 3 /32") 2.77" (2 49 /64").32" ( 2 /64") PTO " (2 55 /64") 3.56" (3 9 /6").34" ( /32") PTO " (2 5 /64") 2.76" (2 3 /4").32" ( 2 /64") PTO " (2 2 /32") 3.26" (3 7 /64").36" ( 23 /64") PTO 9204P5.65" ( 2 /32") 2.76" (2 3 /4").30" ( 9 /64") PTO 9204P6.77" ( 49 /64") 2.76" (2 3 /4").36" ( 23 /64") PTO " (2 /64") 2.76" (2 3 /4").36" ( 23 /64") METAL RETAINING RING PTO " (2 5 /32") 2.76" (2 3 /4").36" ( 23 /64") (Kit includes nylon bearing and metal retaining ring) REPRESENTATIVE DRIVELINE SHOWING OVERALL REPRESSENTATIVE DRIVELINE SHOWING CENTERLINE TO CENTERLINE

21 8-4 PTO PARTS AND COMPONENTS 000 SERIES CROSS REFERENCE QUICK REFERENCE SECTION 0-549NEAPCO 0-52 WESTWARD - PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO or PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO or PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO SPICER WESTWARD - PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO X PTO X PTO X PTO X PTO X PTO X PTO X PTO X PTO PTO PTO PTO PTO PTO or PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO or PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO HM70 PTO

22 PTO PARTS AND COMPONENTS 8-5 STANDARD SPLINES FOR AGRICULTURE " X 5 /8" X 6 TYPE 3 /8" X 6 TYPE 2 3 /8" X 2 3 /4" X 6 TYPE 3 3 /4" X 20

23 8-6 PTO PARTS AND COMPONENTS PTO CROSS & BEARING "E" KITS ENOUGH LUBE FOR THE ENTIRE SEASON! Higher torque capacity Interchangeable with standard kit More production between lube cycles Reduced downtime on drivelines Larger roller bearings Superior performance! Improved orange triple lipped seal for longer life PTO North American Point of Purchase Display Includes: 4 of PTO of PTO of PTO of PTO of PRO of PTO PTO Metric Point of Purchase Display Includes: 4 of PTO of PTO of PTO of PTO of PTO of PTO of PTO of PTO of PTO of PTO DESCRIPTION NORTH AMERICAN E-KITS PTO /32" to 2 5 /6" PTO /6" to 2 9 /6" PTO /8" to 2 5 /8" PTO /4" to 3 7 /32" PTO /6" to 4" PTO /32" x 4 5 /6" METRIC E-KITS PTO x 54 mm PTO x 80 mm PTO x 94 mm PTO x 06.5 mm PTO x 08 mm PTO x 04 mm PTO x 55 mm PTO DESCRIPTION METRIC E-KITS PTO PTO x 76 mm PTO PTO PTO x 89 mm PTO x 6.3 mm PTO x 70 mm PTO x 74.6 mm PTO x 92 mm PTO x 06.5 mm NORTH AMERICAN POINT OF PURCHASE DISPLAY PTO Standard Display METRIC POINT OF PURCHASE DISPLAY PTO Metric Display

24 PTO PARTS AND COMPONENTS 8-7 LOCKING DEVICE QUICK REFERENCE SECTION Safety Slide Lock An exclusive Weasler replacement component, the Safety Slide Lock* yoke is locked in place by two hardened pawls with compound radii that conform to the groove in the shaft for full contact. The device is particularly applicable where there is appreciable end thrust. Spring-Lok The collar is spring loaded for ease of installation and positive locking to tractor shaft. Quick Disconnect A smooth plunger eliminates sharp projections such as x-washers. Trails rather than leads rotation. LOCKING DEVICE REPAIR KIT *Auto-Lok/Safety Slide Lock PTO PTO PTO DESCRIPTION Repair Kit for Weasler Auto-Lok and Safety Slide Lock 6 Spline & 2 Spline Repair Kit for Weasler Auto-Lok and Safety Slide Lock 20 Spline Repair Kit for " x 5 Spline *This repair kit contains both balls & pawls. When repairing the "Safety Slide Lock" use the pawls only and discard the balls. When repairing the "Auto-Lok" use both the balls and the pawls. Spring-Lock PTO PTO DESCRIPTION Repair Kit for Weasler Spring-Lok, 6 Spline & 2 Spline " x 5 Spline Quick Disconnect PTO PTO PTO PTO DESCRIPTION Repair Kit for Weasler and Rockwell 6 Spline Repair Kit for 3 /4" x 6 Spl. Weasler 2 Spline and Hex Quick Disconnect Weasler 20 Spline

25 8-8 PTO PARTS AND COMPONENTS PART NUMBER EXPLANATION DRIVELINE COMPONENTS Each series has an exploded view for identification purposes. The drawing illustrates the components in the same sequence as an implement input driveline transmitting power from tractor to implement. Each component of the exploded view is identified by an eight digit stock number to insure correct identification of each component. Example: 00 prefix denotes a Spring-Lok Tractor Yoke on the exploded view. (When ordering a tractor yoke, be sure the stock number begins with 00.) Number Identification Examples: Spline 6 Series QD Yoke Tractor Yoke 6 Series Cross & Bearing Kit 2 Series Shaft Weld Yoke * /8" *" Shaft 35 Series Slip Sleeve (*Expressed in /6 inches.) 44 Series Tube 44 Series Tube Weld Yoke * /2" Round Bore 35 Series Implement Yoke For 48" O.A. Driveline Guard Type Plastic Guard

26 PTO PARTS AND COMPONENTS 8-9 TRANSPARENCY IDENTIFICATION SYSTEM DRIVELINE COMPONENTS For Driveline Components The individual transparency cards will allow the user to easily identify driveline components. Cross and Bearing Kits may be identified by the bearing cap outside diameter and the width of the cross. Yokes may be identified by the hole in the ear and profile. Tubes and shafts may be identified by the end sections. How to use the Transparency Identification System:. Match the part to be replaced with the corresponding transparency card for identification. 2. Select the proper stock number for the replacement part. PTO

27 8-20 PTO PARTS AND COMPONENTS 6 SERIES DRIVELINE COMPONENTS Tractor Yoke Spring-Lok Repair Kit - Page 49 PTO PTO Auto-Lok Repair Kit - Page 49 PTO 0060 PTO 0065 Quick Disconnect Repair Kit - Page 49 PTO PTO DIM. "A" BORE 3 /8" x 6 Spl. 3 /8" x 2 Spl. DIM. "A" BORE.98" x 0 Spl. " x 5 Spl. Spring-Lok (metal collar) Lawn & Garden Repair Kit - Page 49 PTO (Auto-Lok) PTO (Spring-Lok) Male Spline Lawn & Garden DIM. "A" BORE 3 /8" x 6 Spl. 3 /8" x 2 Spl. DIM. "A" BORE.98" x 0 Spl. " x 5 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Bushing DIM. "A" DIM. "B" PTO /32" 2 9 /32" Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Bushing DIM. "A" DIM. "B" PTO /32" 2 9 /32" Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) DIM. "A" BORE DIM. "B" BORE PTO /4" x 7 /8" PTO " x 5 Spl. - PTO /4" x 7 /8" Without Bearing Groove DIM. "A" DIM. "B" PTO " x 5 Spl PTO DIM. "A" BORE " x 5 Spl.

28 PTO PARTS AND COMPONENTS SERIES DRIVELINE COMPONENTS Shaft 3 /4" x 7 /8" Rectangular PTO ' PTO ' PTO ' " x 5 Spline (Induction Hardened) Tube Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) DIM. "A" BORE FITS TUBE SIZE PTO " x /8" - PTO /2" (.065 Wall) (Guard must rotate freely on yoke) PTO 40465H 3' Slip Sleeve With Grease Groove PTO (without Bearing Groove) PTO (with Groove) Implement Yoke Round Bore With Keyway & Set Screw FITS TUBE SIZE /2" (.065 Wall) /2" (.065 Wall) DIM "A" BORE DIM "B" BORE FITS TUBE SIZE PTO " 3 /4" x 7 /8" Rect. - /2" (.065 Wall) PTO " - " x 5 Spl. /2" (.065 Wall) Tube " x /8" Rectangular O.D. FITS SHAFT PTO ' 3 /4" x 7 /8" PTO ' 3 /4" x 7 /8" PTO ' 3 /4" x 7 /8" /2" Round (.065 Wall) O.D. PTO ' PTO ' STANDARD KEYWAY PTO /8" 3 /6" PTO /4" 3 /6" PTO /6" 3 /6" PTO /8" 3 /6" PTO /6" /4" PTO " /4" PTO /8" /4" PTO /6" /4" PTO /4" /4" Spline Bore With /4" Pin Hole PTO PTO Shear Pin With /4" Pin Hole 3 /8" x 6 Spl. /8" x 6 Spl. PTO " PTO /8" PTO /4" PTO /8"

29 8-22 PTO PARTS AND COMPONENTS 6 SERIES Implement Yoke (cont'd) Square Bore With Set Screw PTO /4" PTO /8" PTO " PTO /8" PTO /4" Round Bore Double Keyway & Set Screw Yoke & Shaft Assembly SHAFT SIZE DRIVELINE COMPONENTS CENTERLINE TO END OF SHAFT DIMENSION PTO " x 5 Spl. 2.50" PTO /4" x 7 /8" 38.75" Yoke & Tube Assembly " x /8" Tube DOUBLE KEYWAY PTO /8" 3 /6" & /8" PTO /4" 3 /6" & /4" PTO /6" 3 /6" & /4" PTO /8" 3 /6" & /4" PTO " 3 /6" & /4" PTO /8" /4" & 5 /6" PTO /6" /4" & 5 /6" PTO /4" /4" & 5 /6" FITS SHAFT CENTERLINE TO END OF TUBE DIMENSION PTO /4" x 7 /8" 38.75" Guard Clamp Yoke With Bolt Hole & Set Screw DIM "A" BORE DIM "B" BORE KEYWAY PTO /8" - 3 /6" PTO " x 5 Spl. - PTO " - /4" Stock Bore With Hub O.D. Turned PTO /2" Order bearings as required. OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards, observe the following: ) Install proper nylon bearing (see page 0). 2) Guards must rotate freely on yokes. Slip Sleeve Yoke Easy Lock Replacement Kit DIM "A" BORE DIM "B" BORE DIM "C" BORE DIM "D" PTO /4" Sq /2" PTO /8" Sq /2" PTO " x 5 Spl. - 5 /2" PTO /4" x 7 /8" Rect. 5 /2" PTO (4 per kit)

30 PTO PARTS AND COMPONENTS SERIES DRIVELINE COMPONENTS Universal Joints Round to Round Furnished with Keyway & Set Screw PTO /4" PTO " Drivelines Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". Drivelines are furnished without Cross & Bearing Kit and Outboard Yokes. Select kit and Outboard Yokes as required. When Cross & Bearing Kit and Outboard Yokes are assembled, the overall compressed length of the driveline will be 48". TRACTOR YOKE OVERALL COMPRESSED DIM "A" OVERALL COMPRESSED DIM "A" PTO /8" x 6 Spl. Spring Lok 48" PTO " TRACTOR YOKE IMPLEMENT YOKE OVERALL COMPRESSED DIM "A" APPLICATION PTO /8" x 6 Spl. Spring Lok " Round with /2" Pin Hole 39" Finishing Mower PTO /8" x 6 Spl. Spring Lok " Round with 5 /6" Pin Hole 32 /2" All Purpose PTO /8" x 6 Spl. Spring Lok " Round /4" Keyway 48" Auger PTO /8" x 6 Spl. Spring Lok 3 /8" x 6 Spl. Spring Lok 27 /4" Fertilizer Spreader PTO /8" x 6 Spl. Q.D. " Round with Pinhole 38" All Purpose

31 8-24 PTO PARTS AND COMPONENTS 2 SERIES DRIVELINE COMPONENTS Tractor Yoke Spring-Lok Repair Kit - Page 49 PTO PTO 0022 Quick Disconnect Repair Kit - Page 49 PTO PTO 0222 Ball Shear Device With Spring-Lok Repair Kit - Page 49 3 /8" x 6 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /8" x 2 Spl. SHEAR BOLT PTO /8" x 6 Spl. 5 /6" - 8 Gr. 5 PTO /8" x 2 Spl. 5 /6" - 8 Gr. 5 Cross & Bearing Kit (R-Kit) Snap Ring Located in Bushing DIM "A" DIM "B" PTO /6" 2 /2" Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Bushing DIM "A" DIM "B" PTO /6" 2 /2" Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO " x /8" PTO Shaft 5 /6" Sq. " x /8" Rectanglular PTO ' PTO ' PTO ' Slip Sleeve With Grease Groove DIM "B" BORE FITS TUBE SIZE PTO " x /8" Rect. - 5" 2" (.083 Wall) PTO Tube 5 /6" x 20 Spl. /4" x 3 /8" Rectangular O.D. FITS SHAFT PTO ' " x /8" PTO ' " x /8" PTO ' " x /8" 8" 2" (.083 Wall)

32 PTO PARTS AND COMPONENTS SERIES DRIVELINE COMPONENTS Tube (cont'd) 2" (.083 Wall) PTO ' PTO ' PTO ' Tube Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO /4" x 3 /8" DIM "B" FITS TUBE SIZE PTO " (.083 Wall) PTO Implement Yoke /4" Sq. Round Bore With Keyway & Set Screw Implement Yoke (cont'd) Shear Pin With /4" Pin Hole PTO " PTO /8" PTO /4" PTO /8" Square Bore With Set Screw PTO /8" PTO " PTO /8" PTO /4" Hexagon Bore With Set Screw PTO /8" PTO ¼" Round Bore Double Keyway & Set Screw STANDARD KEYWAY PTO /4" 3 /6" PTO /8" 3 /6" PTO /6" /4" PTO " /4" PTO /8" /4" PTO /6" /4" PTO /4" /4" PTO /8" 5 /6" PTO /2" 3 /8" Spline Bore With 2 /64" Pin Hole DOUBLE KEYWAY PTO " /4" & 3 /6" PTO /8" /4" & 5 /6" PTO /4" /4" & 5 /6" Stock Bore With Hub O.D. Turned PTO /2" Slip Yoke PTO /8" x 6 Spl. PTO 8020* 3 /6" x 0 Spl. PTO " Sq. PTO " x 3 Spl. w/set Screw PTO 8026 " Rd. with /4" Keyway PTO 8028 /8" x 6 Spl. PTO 8028 /8" Rd. with 5 /6" Keyway PTO 8022 *No pin hole 3 /8" x 2 Spl. PTO PTO 828 " x 5 Spl. /8" Hex

33 8-26 PTO PARTS AND COMPONENTS 2 SERIES DRIVELINE COMPONENTS Yoke & Shaft Assembly " x /8" Shaft Yoke & Tube Assembly /4" x 3 /8" Tube CENTERLINE TO END OF SHAFT DIMENSION PTO " PTO " Guard FITS SHAFT CENTERLINE TO END OF TUBE DIMENSION PTO " x /8" 37.38" PTO " x /8" 49.38" Easy Lock Replacement Kit Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page 0) 2) Guards must rotate freely on yokes. PTO (4 per kit) Universal Joint Spring Lok to Shaft Weld Yoke Repair Kit - Page 49 DIM "B" BORE PTO /8" x 6 Spl. " x /8" Rect. Drivelines Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48" or 60". PTO PTO TRACTOR YOKE 3 /8" x 6 Spl. Spring Lok 3 /8" x 6 Spl. Spring Lok OVERALL COMPRESSED DIM "A" 48" 60" Drivelines are furnished without Cross & Bearing Kit and Outboard Yokes. Select kit and Outboard Yokes as required. When Cross & Bearing Kit and Outboard Yokes are assembled, the overall compressed length of the driveline will be 48" or 60". OVERALL COMPRESSED DIM "A" PTO " PTO " PTO (with crosses installed) 48" PTO (with 5 /6" Sq. Shaft) 48" TRACTOR YOKE IMPLEMENT YOKE OVERALL COMPRESSED DIM "A" APPLICATION PTO /8" x 6 Spl. Q.D. /4" Rd with /4" Keyway 48" Post Hole Digger PTO /8" x 6 Spl. Spring Lok /4" Rd with /4" Keyway 48" Augers

34 PTO PARTS AND COMPONENTS SERIES DRIVELINE COMPONENTS Tractor Yoke Spring-Lok Repair Kit - Page 49 PTO PTO 0042 Safety Slide Lock Repair Kit - Page 49 PTO 0420 Quick Disconnect Repair Kit - Page 49 3 /8" x 6 Spl. 3 /8" x 2 Spl. 3 /4" x 20 Spl. DIM "B" BORE PTO /8" x 6 Spl. - PTO /8" Hex PTO /8" x 2 Spl. - Ball Shear Device With Spring-Lok Repair Kit - Page 49 SHEAR BOLT PTO /8" x 6 Spl. 5 /6" - 8 Gr. 5 PTO /8" x 2 Spl. 5 /6" - 8 Gr. 5 Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" PTO /8" 2 5 /8" Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" PTO /8" 2 5 /8" Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) DIM "B" BORE PTO " x /8" - PTO /6" x 20 Spl. Shaft " x /8" Rectangular PTO ' PTO ' PTO ' 5 /6" x 20 Spline Induction Hardened Slip Sleeve PTO ' " x /8" Rectangular With Grease Groove FITS TUBE SIZE PTO " 2" (.083 Wall)

35 8-28 PTO PARTS AND COMPONENTS 4 SERIES DRIVELINE COMPONENTS Slip Sleeve (cont'd) 5 /6" x 20 Spline With Grease Reservoir FITS TUBE SIZE PTO " 2" (.083 Wall) Tube /4" x 3 /8" Rectangular O.D. FITS SHAFT PTO ' " x /8" PTO ' " x /8" PTO ' " x /8" 2" Round (.083 Wall) PTO ' PTO ' PTO ' Tube Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) DIM "B" FITS TUBE SIZE PTO /4" x 3 /8" - PTO " (.083 Wall) Implement Yoke Round Bore With Keyway & Set Screw Implement Yoke (cont'd) Spline Bore With 2 /64" Pin Hole PTO PTO 8048 PTO PTO 8042 Shear Pin With /4" Pin Hole Square Bore With Set Screw PTO /8" PTO " PTO /8" PTO /6" PTO /4" Hexagon Bore With Set Screw 3 /8" x 6 Spl. /8" x 6 Spl. /4" x 6 Spl. 3 /8" x 2 Spl. PTO /8" PTO /4" PTO * 3 /8" PTO /2" *With /4" and /2" pin hole. Torque Limiter Flange (Interchanges with Great Lakes Clutch) PTO PTO /8" PTO /4" Round Bore Double Keyway & Set Screw STANDARD KEYWAY PTO " /4" PTO /8" /4" PTO /6" /4" PTO /4" /4" PTO /8" 5 /6" PTO /6" 3 /8" PTO /2" 3 /8" DOUBLE KEYWAY PTO /8" /4" & 5 /6" PTO /6" /4" & 5 /6" PTO /4" /4" & 5 /6" Stock Bore With Hub O.D. Turned PTO /4"

36 PTO PARTS AND COMPONENTS SERIES Guard Easy Lock Replacement Kit DRIVELINE COMPONENTS Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page 0) 2) Guards must rotate freely on yokes. Yoke & Shaft Assembly " x /8" Shaft CENTERLINE TO END OF SHAFT DIMENSION PTO " PTO " PTO " PTO (4 per kit) Yoke, Tube & Sleeve Assembly " x /8" Rectangular CENTERLINE TO END OF TUBE DIMENSION PTO " PTO " PTO " Universal Joints Spring-Lok to Shaft Weld Yoke Repair Kit - Page 6 DIM "B" BORE PTO /8" x 6 Spl. " x /8" Rect. Drivelines Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48" or 60". PTO PTO TRACTOR YOKE 3 /8" x 6 Spl. Spring Lok 3 /8" x 6 Spl. Spring Lok OVERALL COMPRESSED DIM "A" 48" 60" Drivelines are furnished without Cross & Bearing Kit and Outboard Yokes. Select kit and Outboard Yokes as required. When Cross & Bearing Kit and Outboard Yokes are assembled, the overall compressed length of the driveline will be 48" or 60". OVERALL COMPRESSED DIM "A" PTO " PTO " PTO (with crosses installed) 48" TRACTOR YOKE IMPLEMENT YOKE OVERALL COMPRESSED DIM "A" APPLICATION PTO /8" x 6 Spl. Spring Lok 3 /8" Round with /2" Shear Pin Hole 30 3 /6" 4 ft. Lift Type Rotary Cutter PTO /8" x 6 Spl. Spring Lok 3 /8" Round with /2" Shear Pin Hole 37 3 /6" 5 ft. Lift Type Rotary Cutter PTO /8" x 6 Spl. Spring Lok 3 /8" Round with /2" Shear Pin Hole 56 3 /6" 5 & 6 ft. Pull Type Rotary Cutter PTO /8" x 6 Spl. Spring Lok /4" Round with /4" Keyway 48" Auger

37 8-30 PTO PARTS AND COMPONENTS 35 SERIES DRIVELINE COMPONENTS Tractor Yoke Safety Slide Lock Repair Kit - Page 49 PTO PTO PTO 0352 Quick Disconnect Repair Kit - Page 49 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. DIM "B" BORE PTO /4" Hex PTO /8" x 6 Spl. - PTO /8" Hex PTO /4" x 20 Spl. - PTO /8" x 2 Spl. - PTO /4" x 6 Spl. - Ball Shear Device With Safety Slide Lock Repair Kit - Page 49 SHEAR BOLT PTO /8" x 6 Spl. (2) 3 /8" - 6 Gr. 5 PTO /4" x 20 Spl. (2) 3 /8" - 6 Gr. 5 PTO /8" x 2 Spl. (2) 3 /8" - 6 Gr. 5 Auto-Lok Repair Kit - Page 49 PTO PTO PTO /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" PTO /4" 3 7 /32" Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" PTO /4" 3 7 /32" Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) DIM "B" BORE PTO /6" Sq. - PTO /6" x 20 Spl. PTO /6" x 20 Spl. Shaft 3 /6" Square PTO ' PTO ' PTO '

38 PTO PARTS AND COMPONENTS SERIES DRIVELINE COMPONENTS Shaft Spline Shaft Induction Hardened Implement Yoke Round Bore With Keyway & Set Screw DIM "A" SIZE PTO /6" x 20 Spl. 3' PTO /6" x 20 Spl. 3' Slip Sleeve With Grease Groove DIM "B" BORE FITS TUBE SIZE PTO " 3 /6" Sq. - 2 /8" (.20 Wall) PTO " 3 /6" Sq. - 2 /8" (.083 Wall) & 2 /4" (.20 Wall) PTO " 5 /6" Sq. - 2 /2" (.20 Wall) PTO " - /6" x 20 Spl. 2 /2" (.20 Wall) Spline Sleeve With Grease Reservoir STANDARD KEYWAY PTO " /4" PTO /8" /4" PTO /6" /4" PTO /4" /4" PTO /8" 5 /6" PTO /6" 3 /8" PTO /2" 3 /8" PTO H /2" 3 /8" with Pin hole PTO /8" 3 /8" PTO /4" 3 /8" Spline Bore With 2 /64" Pin Hole PTO PTO /8" x 6 Spl. 3 /8" x 2 Spl. FITS TUBE SIZE PTO " 5 /6" x 20 Spl. 2 /8" (.20 Wall) PTO " /6" x 20 Spl. 2 /2" (.20 Wall) Tube DIM "A" SIZE PTO /8" (.20 Wall) 6' PTO /8" (.083 Wall) 6' PTO /8" (.20 Wall) 0' PTO /8" (.20 Wall) 3' Tube Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO PTO PTO with Bore** PTO with Bore** PTO with Bore** **Bore through for telescoping shaft. FITS TUBE SIZE 2 /8" (.20 Wall) 2 /8" (.083 Wall) 2 /4" (.20 Wall) 2 /2" (.20 Wall) 2 /8" (.20 Wall) Shear Pin With /4" Pin Hole PTO /4" PTO * 3 /8" PTO /2" *With /2" Pin Hole Torque Limiter Flange (Interchanges with Great Lakes Clutch) Square Bore With Set Screw PTO PTO " PTO /8" PTO /6" PTO /4" PTO /2" PTO /8"

39 8-32 PTO PARTS AND COMPONENTS 35 SERIES DRIVELINE COMPONENTS Implement Yoke Round Bore With Double Keyway & Set Screw Yoke & Shaft Assembly 3 /6" Square Shaft DOUBLE KEYWAY PTO /6" /4" & 5 /6" PTO /4" /4" & 5 /6" PTO /8" 5 /6" & 3 /8" Clamp Yoke PTO PTO PTO Stock Bore With Hub O.D. Turned 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /4" x 27 Spl. PTO " Guard Yoke, Tube & Sleeve Assembly 3 /6" Square CENTERLINE TO END OF SHAFT DIMENSION PTO " PTO " PTO " PTO " PTO " CENTERLINE TO END OF TUBE DIMENSION PTO " PTO " PTO " PTO " PTO " Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page 0) 2) Guards must rotate freely on yokes. Universal Joints Quick Disconnect to Shaft Weld Yoke Repair Kit - Page 46 DIM "B" BORE PTO /8" x 6 Spl. 3 /6" Sq. Easy Lock Replacement Kit PTO (4 per kit)

40 PTO PARTS AND COMPONENTS SERIES DRIVELINE COMPONENTS Drivelines Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 3", 35", 48" or 60". TRACTOR YOKE OVERALL COMPRESSED DIM "A" PTO /8" x 6 Spl. Q.D. 3" PTO /8" x 6 Spl. Q.D. 35" PTO /8" x 6 Spl. Q.D. 48" PTO /8" x 6 Spl. Q.D. 60" Drivelines are furnished without Cross & Bearing Kit and Outboard Yokes. Select kit and Outboard Yokes as required. When Cross & Bearing Kit and Outboard Yokes are assembled, the overall compressed length of the driveline will be 39", 48" or 60". OVERALL COMPRESSED DIM "A" PTO " PTO " PTO (with crosses installed) 39" PTO (with crosses installed) 48" TRACTOR YOKE IMPLEMENT YOKE OVERALL COMPRESSED DIM "A" APPLICATION PTO /8" x 6 Spl. Q.D. 3 /8" Round with /2" Shear Pin Hole 64 7 /8" 7 ft. Pull Type Rotary Cutter PTO /8" x 6 Spl. Q.D. /2" Round with 3 /8" Keyway 48" Pumps PTO /8" x 6 Spl. Safety Slide Lock 3 /8" 6 Spl. Safety Slide Lock 36" All Purpose

41 8-34 PTO PARTS AND COMPONENTS 44 SERIES DRIVELINE COMPONENTS Tractor Yoke Safety Slide Lock Repair Kit - Page 49 PTO PTO PTO 0442 Quick Disconnect Repair Kit - Page 49 PTO PTO PTO Ball Shear Device With Safety Slide Lock Repair Kit - Page 49 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. SHEAR BOLT PTO /8" x 6 Spl. (2) 3 /8" - 6 Gr. 5 PTO /4" x 20 Spl. (2) 3 /8" - 6 Gr. 5 PTO /8" x 2 Spl. (2) 3 /8" - 6 Gr. 5 Auto-Lok Repair Kit - Page 49 Cross & Bearing Kit (R-Kit) Snap Ring Located in Bushing DIM "A" DIM "B" PTO /6" 4" Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Bushing DIM "A" DIM "B" PTO /6" 4" Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) DIM "B" BORE PTO /6" Sq. - PTO /6" x 20 Spl. Shaft 5 /6" Square PTO ' PTO ' PTO ' PTO PTO PTO /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Induction Hardened DIM "A" PTO /6" x 20 Spl. 3' PTO /6" x 20 Spl. 3'

42 PTO PARTS AND COMPONENTS SERIES DRIVELINE COMPONENTS Slip Sleeve With Grease Groove DIM "A" DIM "B" FITS TUBE SIZE PTO " - 5 /6" Sq. 2 /2" (.20 Wall) PTO " /6" x 20 Spl. 2 /2" (.20 Wall) With Grease Reservoir DIM "A" DIM "B" FITS TUBE SIZE Implement Yoke Spline Bore With 2 /64" Pin Hole PTO PTO /8" x 6 Spl. 3 /8" x 2 Spl. Torque Limiter Flange (Interchanges with Great Lakes Clutch) PTO PTO /6" x 20 Spl. - 8" 2 /2" (.20 Wall) PTO /6" x 20 Spl. - 8" 2 /2" (.20 Wall) PTO /6" Sq. 8" 2 /2" (.20 Wall) Tube 2 /2" (.20 Wall) PTO ' PTO ' PTO ' Tube Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO FITS TUBE SIZE 2 /2" (.20 Wall) *PTO (with bore) 2 /2" (.20 Wall) *Bore through for telescoping. Implement Yoke STANDARD KEYWAY PTO /4" /4" PTO /8" 5 /6" PTO /6" 3 /8" PTO /2" 3 /8" PTO /8" 3 /8" PTO /4" 3 /8" PTO " /2" Square Bore With Set Screw PTO /8" Round Bore With Double Keyway & Set Screw DOUBLE KEYWAY PTO /4" 5 /6" & /4" PTO /8" 5 /6" & /4" PTO /2" 5 /6" & 3 /8" Clamp Yoke Round Bore With Keyway & Set Screw PTO PTO PTO PTO Stock Bore With Hub O.D. Turned PTO " 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /4" x 27 Spl.

43 8-36 PTO PARTS AND COMPONENTS 44 SERIES DRIVELINE COMPONENTS Guard Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page 0) 2) Guards must rotate freely on yokes. Yoke & Shaft Assembly Easy Lock Replacement Kit PTO (4 per kit) Yoke, Tube & Sleeve Assembly DIM "A" DIM "B" CENTERLINE TO END OF SHAFT DIMENSION PTO /6" Sq " PTO /6" Sq " PTO /6" x 20 Spl. 33.2" DIM "A" BORE DIM "B" BORE CENTERLINE TO END OF TUBE DIMENSION PTO /6" Sq " PTO /6" Sq " PTO /6" x 20 Spl " Drivelines Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48" or 60". SHAFT SIZE TRACTOR YOKE OVERALL COMPRESSED DIM "A" PTO /6" 3 /8" x 6 Spl. Q.D. 48" PTO /6" 3 /8" x 6 Spl. Q.D. 60" PTO /6" x 20 Spl. 3 /8" x 6 Spl. Q.D. 48" Drivelines are furnished without Cross & Bearing Kit and Outboard Yokes. Select kit and Outboard Yokes as required. When Cross & Bearing Kit and Outboard Yokes are assembled, the overall compressed length of the driveline will be 48" or 60". SHAFT SIZE OVERALL COMPRESSED DIM "A" PTO /6" 48" PTO /6" 60" PTO /6" x 20 Spl. 48"

44 PTO PARTS AND COMPONENTS SERIES DRIVELINE COMPONENTS Tractor Yoke Safety Slide Lock Repair Kit - Page 49 PTO PTO PTO 0552 Quick Disconnect Repair Kit - Page 49 PTO PTO PTO PTO Ball Shear Device With Safety Slide Lock Repair Kit - Page 49 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /8" x 2 Spl. 3 /4" x 20 Spl. 3 /4" x 6 Spl. SHEAR BOLT PTO /8" x 6 Spl. (2) 3 /8" - 6 Gr. 5 PTO /4" x 20 Spl. (2) 3 /8" - 6 Gr. 5 PTO /8" x 2 Spl. (2) 3 /8" - 6 Gr. 5 Auto-Lok Repair Kit - Page 49 PTO PTO PTO /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" PTO /32" 4 5 /6" Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" PTO /32" 4 5 /6" Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) DIM "B" BORE PTO /6" Sq. - PTO /6" Sq. - PTO /6" x 20 Spl. Shaft 5 /6" Square PTO ' PTO ' PTO ' /6" x 20 Spline Induction Hardened DIM "A" PTO /6" x 20 Spl. 3' PTO /6" x 20 Spl. 3'

45 8-38 PTO PARTS AND COMPONENTS 55 SERIES DRIVELINE COMPONENTS Slip Sleeve With Grease Groove DIM "A" BORE DIM "B" BORE FITS TUBE SIZE PTO " - 5 /6" Sq. 2 /2" (.20 Wall) PTO " /6" x 20 Spl. 2 /2" (.20 Wall) With Grease Reservoir Implement Yoke Spline Bore With 2 /64" Pin Hole PTO PTO Clamp Yoke 3 /8" x 6 Spl. 3 /8" x 2 Spl. DIM "A" BORE DIM "B" BORE FITS TUBE SIZE PTO /6" x 20 Spl. - 8" 2 /2" (.20 Wall) PTO /6" x 20 Spl. - 8" 2 /2" (.20 Wall) PTO /6" Sq. 8" 2 /2" (.20 Wall) PTO PTO PTO PTO /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /4" x 27 Spl. Tube 2 /2" (.20 Wall) PTO ' PTO ' PTO ' Tube Weld Yoke Stock Bore With Hub O.D. Turned PTO " Guard With Bearing Groove (Guard must rotate freely on yoke) PTO FITS TUBE SIZE 2 /2" (.20 Wall) *PTO (with bore) 2 /2" (.20 Wall) *Bore through for telescoping. Implement Yoke Round Bore With Keyway & Set Screw STANDARD KEYWAY PTO /8" 5 /6" PTO /2" 3 /8" PTO /8" 3 /8" PTO /4" 3 /8" PTO " /2" Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page 0) 2) Guards must rotate freely on yokes. Easy Lock Replacement Kit PTO (4 per kit)

46 PTO PARTS AND COMPONENTS SERIES Yoke & Shaft Assembly Yoke, Tube & Sleeve Assembly DRIVELINE COMPONENTS SHAFT SIZE CENTERLINE TO END OF SHAFT DIMENSION PTO /6" 32.75" PTO /6" 44.88" PTO /6" x 20 Spl " DIM "A" BORE DIM "B" BORE CENTERLINE TO END OF TUBE DIMENSION PTO /6" Sq " PTO /6" Sq " PTO /6" x 20 Spl " Drivelines Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48" or 60". SHAFT SIZE TRACTOR YOKE OVERALL COMPRESSED DIM "A" PTO /6" 3 /8" x 6 Spl. Q.D. 48" PTO /6" 3 /8" x 6 Spl. Q.D. 60" PTO /6" x 20 Spl. 3 /8" x 6 Spl. Q.D. 48" Drivelines are furnished without Cross & Bearing Kit and Outboard Yokes. Select kit and Outboard Yokes as required. When Cross & Bearing Kit and Outboard Yokes are assembled, the overall compressed length of the driveline will be 48", 58" or 60". SHAFT SIZE OVERALL COMPRESSED DIM "A" PTO /6" Sq. 48" PTO /6" Sq. 60" PTO /6" x 20 Spl. 48" PTO /6" x 20 Spl. 58" TRACTOR YOKE IMPLEMENT YOKE PTO PTO /8" x 6 Spl. Safety Slide Lock 3 /4" x 20 Spl. Safety Slide Lock 3 /8" x 6 Spl. Safety Slide Lock 3 /8" Rd. w/ Keyway and (2) Set Screws OVERALL COMPRESSED DIM "A" APPLICATION SHAFT SIZE 37" All Purpose 5 /6" Sq. 46" All Purpose /6" x 20 Spl.

47 8-40 PTO PARTS AND COMPONENTS W SERIES DRIVELINE COMPONENTS Tube /4" Square O.D. FITS SHAFT PTO ' 5 /6" Sq. Tractor Yoke Spring-Lok Repair Kit - Page 49 PTO PTO Quick Disconnect Repair Kit - Page 49 3 /8" x 2 Spl. 3 /8" x 6 Spl. Tube Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) FITS TUBE SIZE PTO /6" Sq. /4" Guard PTO /8" x 6 Spl. Cross & Bearing Kit (Pin & Block Style) Zerk Located in Block DIM "A" DIM "B" PTO /6" /2" Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO /6" Sq. Shaft Order Bearings as required Easy Lock Replacement Kit PTO (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page 0) 2) Guards must rotate freely on yokes. Drivelines 5 /6" Square FITS TUBE PTO ' /4" Sq. Use 2 Series driveline for all "W" Series replacement drivelines. See 2 Series (Page 26) for drivelines.

48 PTO PARTS AND COMPONENTS 8-4 W SERIES - DOMESTIC DRIVELINE COMPONENTS Implement Yoke ROUND BORE with Keyway & Set Screw "A" BORE STANDARD KEYWAY PTO /8" 3 /6" PTO /4" 3 /6" PTO /6" 3 /6" PTO /8" 3 /6" PTO /6" /4" PTO " /4" PTO /8" /4" PTO /6" /4" PTO /4" /4" Driveline TRACTOR YOKE IMPLEMENT YOKE OVERALL COMPRESSED "A" APPLICATION PTO /8" x 6 Spring-Lok /4" Round /4" Keyway 48" Post Hole Digger

49 8-42 PTO PARTS AND COMPONENTS 0675 SERIES DRIVELINE COMPONENTS Tractor Yoke Spring-Lok Repair Kit - Page 49 PTO Quick Disconnect Repair Kit - Page 49 PTO /8" x 6 Spl. 3 /8" x 6 Spl. Implement Yoke Round Bore With Keyway & Set Screw STANDARD KEYWAY PTO /8" 3 /6" PTO /4" 3 /6" Spline Bore With 2 /64" Pin Hole Cross & Bearing Kit Snap Ring Located in Bushing DIM "A" DIM "B" PTO /6" 2 5 /6" Square Bore With Set Screw PTO /8" x 6 Spl. Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO /4" x 7 /8" Tube Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO " x /8" PTO /4" PTO /8" PTO " Round Bore With Double Keyway & Set Screw DOUBLE KEYWAY PTO /8" 3 /6" x /4" PTO " 3 /6" x /4" PTO /8" /4" x 5 /6" PTO /4" /4" x 5 /6"

50 PTO PARTS AND COMPONENTS SERIES Tractor Yoke Quick Disconnect Repair Kit - Page 49 PTO /8" x 6 Spl. Cross & Bearing Kit Snap Ring Located in Bushing DIM "A" DIM "B" PTO /6" 2 9 /64" Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO /4" x 7 /8" Rect. Tube Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO " x /8" Implement Yoke Spline Bore With Set Screw DIM "B" CENTERLINE PTO " x 3 Spl. 2 /2" (2.50) PTO 8008 /8" x 6 Spl. 2 /2" (2.50) Shear Pin DIM "B" CENTERLINE PINHOLE SIZE PTO /6" 2 /2" (2.50) /32" (.34) PTO " 2 /2" (2.50) /4" (.25) PTO " 2 /2" (2.50) 3 /8" (.38) PTO /4" 2 /2" (2.50) 5 /6" (.3) PTO /2" 2 /2" (2.50) 9 /32" (.28) PTO /2" 2 /2" (2.50) 7 /64" (.27) Implement Yoke Round Bore With Keyway & Set Screw KEYWAY DRIVELINE COMPONENTS DIM "B" CENTERLINE PTO /8" 3 /6" (.9) 2 /2" (2.50) PTO /8" 3 /6" (.9) /6" (.69) PTO /4" 3 /6" (.9) 2 /2" (2.50) PTO /4" 3 /6" (.9) /6" (.69) PTO /4" /4" (.25) 2 /2" (2.50) PTO /6" /4" (.25) 2 /2" (2.50) PTO /6" /4" (.25) /6" (.69) PTO /8" 3 /6" (.9) 2 /2" (2.50) PTO /8" /4" (.25) 2 /2" (2.50) PTO /8" /4" (.25) 2 /2" (2.50) PTO /8" /4" (.25) /6" (.69) PTO /6" /4" (.25) 2 /2" (2.50) PTO " 3 /6" (.9) 2 /2" (2.50) PTO " /4" (.25) 2 /2" (2.50) PTO " /4" (.25) 2 /2" (2.50) PTO " /4" (.25) /6" (.69) PTO /6" /4" (.25) 2 /2" (2.50) PTO /8" /4" (.25) 2 /2" (2.50) PTO /8" 5 /6" (.3) 2 /2" (2.50) PTO /6" 5 /6" (.3) 2 /2" (2.50) PTO /4" /4" (.25) 2 /2" (2.50) PTO /4" 5 /6" (.3) 2 /2" (2.50) PTO /4" 5 /6" (.3) 2 /2" (2.50) PTO /8" 5 /6" (.3) 2 /2" (2.50) PTO /8" 3 /8" 2 /2" (2.50) Square Bore With Set Screw DIM "B" CENTERLINE PTO /4" 2 /2" (2.50) PTO /4" /6" (.69) PTO /8" 2 /2" (2.50) PTO /8" /6" (.69) PTO " 2 /2" (2.50) PTO /8" 2 /2" (2.50) PTO /8" 2 /2" (2.50)

51 8-44 PTO PARTS AND COMPONENTS 000 SERIES Implement Yoke Square Bore With Pin Hole DIM "B" CENTERLINE PINHOLE SIZE PTO /4" 2 /2" (2.50) 5 /6" (.32) PTO " 2 /2" (2.50) 3 /8" (3.75) Round Bore Double Keyway & Set Screw DOUBLE KEYWAY DIM "B" CENTERLINE PTO /4" 3 /6" & /4" 2 /2" (2.50) PTO /6" 3 /6" & /4" 2 /2" (2.50) PTO /8" 3 /6" & /4" 2 /2" (2.50) PTO " 3 /6" & /4" 2 /2" (2.50) PTO /8" 3 /6" & /4" 2 /2" (2.50) PTO /8" /4" & 5 /6" 2 /2" (2.50) PTO /4" /4" & 5 /6" 2 /2" (2.50) PTO /6" /4" & 5 /6" 2 /2" (2.50) Hexagon Bore With Set Screw PTO /8" PTO /8" Slip Sleeve Yoke Square PTO /4" PTO /8" PTO " Round KEYWAY DIM "B" CENTERLINE PTO /4" 3 /6" 5 /2" (5.50) PTO /8" /4" 5 /2" (5.50) PTO /6" /4" 5 /2" (5.50) PTO 8006 " /4" 5 /2" (5.50) PTO " /4" 5 /2" (5.50) PTO 8008 /8" /4" 5 /2" (5.50) PTO /8" 5 /6" 5 /2" (5.50) PTO /4" /4" 5 /2" (5.50) PTO /4" 5 /6" 5 /2" (5.50) PTO /8" /4" 5 /2" (5.50) Hex Slip Sleeve Yoke PTO /8" PTO 808 /8" Spline DRIVELINE COMPONENTS DIM "B" CENTERLINE PTO 8208 /8" x 0 Spl. 5 /2" (5.50) PTO /4" x 6 Spl. 5 /2" (5.50) DIM "B" CENTERLINE PTO /4" x 7 /8" 5 /2" (5.50) PTO /8" 5 /2" (5.50) PTO " 5 /2" (5.50) Guard Order Bearings as required Easy Lock Replacement Kit PTO (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page 0) 2) Guards must rotate freely on yokes.

52 PTO PARTS AND COMPONENTS SERIES Interchanges with Neapco Cross & Bearing Kit Snap Ring Located in Bushing DRIVELINE COMPONENTS VEHICULAR CROSS & BEARING KIT Interchanges with Spicer SPICER U-JOINT SERIES DIM "A" DIM "B" PTO /6" 3 7 /32" DIM "A" DIM "B" PTO " 3 /4" PTO /6" 3 5 /8" PTO /6" 4 3 /6" FR SERIES Cross & Bearing Kit Snap Ring Located in Yoke 4 SERIES Interchanges with Howse Cross & Bearing Kit Snap Ring Located in Bushing DIM "A" DIM "B" PTO /8" 2 5 /6" DIM "A" DIM "B" PTO /8" 2 5 /8" 3 DR SERIES Cross & Bearing Kit Snap Ring Located in Yoke 35 SERIES Interchanges with Howse Cross & Bearing Kit Snap Ring Located in Bushing DIM "A" DIM "B" PTO " 3 5 /6" DIM "A" DIM "B" PTO /4" 3 7 /32"

53 8-46 PTO PARTS AND COMPONENTS 2600 SERIES Interchanges with Neapco & Walterscheid 480 Tractor Yoke Quick Disconnect Repair Kit - Page 49 PTO PTO PTO /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Tube 2 3 /4" (.09 Wall) DRIVELINE COMPONENTS PTO ' Cross & Bearing Kit Snap Ring Located in Yoke DIM "A" DIM "B" PTO /8" 4 3 /6" Tube Weld Yoke With Bearing Groove (Guards must rotate freely on the yoke) Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO /6" Sq. PTO Implement Yoke Round Bore With Keyway & Set Screw FITS TUBE SIZE 2 3 /4" (.09 Wall) Shaft 5 /6" Square PTO ' PTO ' PTO ' STANDARD KEYWAY PTO /8" 5 /6" PTO /2" 3 /8" PTO /4" 3 /8" Guard Slip Sleeve 5 /6" Square With Grease Groove FITS TUBE SIZE PTO " 2 3 /4" (.09 Wall) With Bearings ( ) OVERALL DRIVELINE PTO " Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing and retainer (See Page 0) 2) Guards must rotate freely on yokes.

54 PTO PARTS AND COMPONENTS 8-47 SHAFTING & TUBING DRIVELINE COMPONENTS Shafting Tubing SIZE PTO /4" Sq. 6' PTO /8" Sq. 6' PTO /6" Sq. 6' PTO " Sq. 6' PTO /6" Sq. 6' PTO /4" Sq. 6' PTO /6" Sq. 6' PTO /4" x 7 /8" Rect. 6' PTO " x /8" Rect. 6' PTO /6" Sq. 0' PTO /6" Sq. 0' PTO /4" x 7 /8" Rect. 0' PTO 4068 " x /8" Rect. 0' PTO /8" Hex 6' PTO " Hex 6' PTO /8" Hex 6' PTO /4" Hex 6' PTO /6" Sq. 3' PTO /6" Sq. 3' PTO /4" x 7 /8" Rect. 3' PTO 40465H " x 5 Spl. (Induction Hardened) 3' PTO " x /8" Rect. 3' PTO /6" x 20 Spl. (Induction Hardened) 3' PTO /6" x 20 Spl. (Induction Hardened) 3' SIZE PTO " Sq. 6' PTO /4" Sq. (.20 Wall) 6' PTO /4" Sq. (.09 Wall) 6' PTO /8" Sq. 6' PTO /4" x 7 /8" Rect. 6' PTO /4" x 3 /8" Rect. 6' PTO /4" x 7 /8" Rect. 0' PTO /4" x 3 /8" Rect. 0' PTO /2" Rd. 6' PTO " Rd. (.083 Wall) 6' PTO /4" Rd. (.09 Wall) 6' PTO /8" Rd. (.20 Wall) 6' PTO /8" Rd. (.083 Wall) 6' PTO /2" Rd. (.20 Wall) 6' PTO " Rd. (.083 Wall) 0' PTO /8" Rd. (.20 Wall) 0' PTO /2" Rd. (.20 Wall) 0' PTO /2" Rd. 3' PTO " Rd. (.083 Wall) 3' PTO /4" x 7 /8" Rect. 3' PTO /4" x 3 /8" Rect. 3' PTO /8" Rd. (.20 Wall) 3' PTO /2" Rd. (.20 Wall) 3' Shock Absorbing Flexible Coupling Disc Spider 6" O.D. DESCRIPTION DESCRIPTION PTO Disc only w/ 5 /8" holes PTO /8" x 6 Spl. with 5 /8" bolt hole PTO Disc only w/ /2" holes PTO /8" x 6 Spl. with 2 /64" pinholes & 5 /8" bolt hole PTO /4" Rd. with 3 /8" keyway & 5 /8" bolt hole

55 8-48 PTO PARTS AND COMPONENTS NYLON BEARING REPAIR KIT DRIVELINE COMPONENTS (Kit includes nylon bearing and retainer) NOTE! Not all guard and bearing systems are interchangeable. When purchasing shaft weld and tube weld yokes or guards, make certain there is a proper fit between nylon bearing raceway in yoke and guard. It is essential that the proper nylon bearing is identified and installed to insure proper performance and safety. To assist in ordering the proper nylon bearing, listed below are part numbers and dimensions for our standard aftermarket and OEM nylon bearings. DIM "A" YOKE RACEWAY O.D. NYLON BEARING I.D. DIM "B" YOKE RACEWAY WIDTH NYLON BEARING WIDTH DIM "C" NYLON BEARING O.D. PTO /8" (2.25") 3 /8" (.375") 2 3 /4" (2.75") PTO /4" (.75") 3 /8" (.375") 2 3 /4" (2.75") PTO " (2.0") 3 /8"(.375") 2 3 /4" (2.75") PTO /8" (.375") /32" (.343") 2" (2.0") PTO /8" (.625") /32" (.343") 2 3 /4" (2.75") PTO /8" (2.25") 3 /8" (.375") 3 /4" (3.25") PTO /4" (.75") 3 /8" (.375") 2 /2" (2.50") PTO /8" (.625") /32" (.343") 2 /4" (2.25") PTO " (2.0") 3 /8" (.375") 3 /4" (3.25") PTO /32" (2.530") 33 /64" (.358") 2 49 /64" (2.770") PTO /6" (.825") 9 /32" (.282") 2 3 /4" (2.75") PTO /6" (2.0625") /32" (.343") 2 3 /4" (2.75") PTO /8" (2.875") /32" (.343") 3 9 /6" (3.5625") PTO /6" (2.0625") /32"(.343") 2 3 /4" (2.75") PTO /8" (2.625") 3 /8" (.375") 3 /4" (3.25") PTO 9204P5 2 /32" (.646") /32" (.358") 2 3 /4" (2.76") PTO 9204P6 25 /32" (.770") /32" (.358") 2 3 /4" (2.76") PTO /32" (2.02") /32" (.358") 2 3 /4" (2.76") PTO /32" (2.46") /32"(.358") 2 3 /4" (2.76") PTO 9204N5 6 /64" (.947") 9 /32" (.29") 2 /4" (2.25") PTO 9204N6 2 /8" (2.25") 2 /64" (.34") 2 /2" (2.50") NOTE! All Series North American guards are provided without nylon bearings. To help assure the proper set of nylon bearings are installed, one nylon bearing set will be exactly the same (nylon bearing raceway dimensions) as has always been provided in our aftermarket guards. The other set will be dimensioned to retrofit the Weasler OEM raceway. Assembly instructions included with these nylon bearing kits.

56 PTO PARTS AND COMPONENTS 8-49 LOCKING DEVICE DRIVELINE COMPONENTS Safety Slide Lock An exclusive Weasler replacement component, the Safety Slide Lock* yoke is locked in place by two hardened pawls with compound radii that conform to the groove in the shaft for full contact. The device is particularly applicable where there is appreciable end thrust. Spring-Lok The collar is spring loaded for ease of installation and positive locking to tractor shaft. Quick Disconnect A smooth plunger eliminates sharp projections such as x-washers. Trails rather than leads rotation. LOCKING DEVICE REPAIR KIT *Auto-Lok/Safety Slide Lock PTO PTO PTO DESCRIPTION Repair Kit for Weasler Auto-Lok and Safety Slide Lock 6 Spline & 2 Spline Repair Kit for Weasler Auto-Lok and Safety Slide Lock 20 Spline Repair Kit for " x 5 Spline *This repair kit contains both balls & pawls. When repairing the "Safety Slide Lock" use the pawls only and discard the balls. When repairing the "Auto-Lok" use both the balls and the pawls. Spring-Lock PTO PTO DESCRIPTION Repair Kit for Weasler Spring-Lok, 6 Spline & 2 Spline " x 5 Spline Quick Disconnect PTO PTO PTO PTO DESCRIPTION Repair Kit for Weasler and Rockwell 6 Spline Repair Kit for 3 /4" x 6 Spl. Weasler 2 Spline and Hex Quick Disconnect Weasler 20 Spline

57 8-50 PTO PARTS AND COMPONENTS COMPLETE UNIVERSAL JOINTS Round to Round SERIES NO. BORE A BORE A- WEIGHT LBS. PTO P Round Round 2.26 PTO N ¾ Round ¾ Round 2.56 PTO N Round Round 3.3 Round bore yokes are furnished with standard keyway and setscrew. Round to Tube Weld SERIES NO. BORE A BORE A- WEIGHT LBS. PTO N round x /8 Rect Round bore yokes are furnished with standard keyway and setscrew. COMBINE HEADER DRIVELINES Metric SERIES COMBINE HOOK-UP HEADER HOOK-UP OAL COMPRESSED FITS PTO /8" x 2 Spline Slide Collar /8" Hex Clamp 3" Cutting Platform Series: 90, 600 & 900 Models: 65, 68, 620, 622, 625, 630, 98 & 920 Draper Platform Series: 90-25', 30', 36' Models: 606C, 608C & 62C (New) PTO /8" x 2 Spline Slide Collar /8" Hex Clamp 6" 635 Flex Platform (2008 Models) PTO /8" Hex Slide Collar /8" Hex Clamp 33" Case-IH Combine Models: 420, 440, 460, 470, 480, 482, 620, 640, 644, 660, 666, 670, 680, 682, 688, 244, 266, 288, 2344, 2366, 2377, 2388 John Deere Combine Models: 253A, 453A, 454A, 653A, 654A, 655A, 853A, 854A North American SERIES COMBINE HOOK-UP HEADER HOOK-UP OAL COMPRESSED FITS PTO /8" x 2 Spline Slide Collar /8" Hex Clamp 3" Cutting Platform Series: 90, 600 & 900 Models: 65, 68, 620, 622, 625, 630, 98 & 920 Draper Platform Series: 90-25', 30', 36' Models: 606C, 608C & 62C (New) PTO /8" x 2 Spline Slide Collar /8" Hex Clamp 6" 635 Flex Platform (2008 Models)

58 8-5 PTO PARTS AND COMPONENTS COMPETITOR INTERCHANGEABILITY FM/TRW NEAPCO BONDIOLI & PAVESI AGDRIVE WALTERSCHEID WEASLER Series Kit AB AP Series Kit AW0 AP Series Kit AB2 AP Series Kit AW20 AP Series Kit AB3 AP Series Kit I I -032 AW AP3 I Series Kit AW2 AP Series Kit AB4 AP Series Kit AB5 AP Series Kit AW35 AP Series Kit AB6 AP Series Kit AW36 AP Series Kit AB7N AP7N Series Kit AB8 AP Series Kit AB9 AP900 Series Kit

59 8-52 PTO PARTS AND COMPONENTS METRIC PTO DRIVELINES, COMPONENTS & ACCESSORIES NOW AVAILABLE - a complete line of European drivelines and accessories for replacement of complete drivelines in the field. Plus a complete inventory of reasonably priced replacement parts to fit existing Bondioli & Pavesi and Walterscheid drivelines. Bondioli & Pavesi Drivelines Covered Walterscheid Drivelines Covered B&P SERIES CROSS SIZE AG- DRIVE SERIES 540 RPM HP,000 RPM IN. LB. TORQUE 540 RPM,000 RPM WALTER- SCHEID SERIES CROSS SIZE AGDRIVE SERIES 540 RPM HP,000 RPM IN. LB. TORQUE 540 RPM,000 RPM AB 6 25,850, AW0 6 24,860,550 2 AB ,400,950 AW0S ,40 2,600 3 AB ,450 2, AW ,40 2,600 4 AB ,050 3,350 AW20S 6 24,860,530 5 AB ,500 4, AW ,420 3,675 6 AB ,350 6,259 AW2S ,50 5,30 7 AB7N ,600 7, AW ,50 5,30 8 AB ,950 9,300 AW35S ,400 8,630 9 AB ,800, AW ,800,850 Important Notice: These drivelines, accessories and replacement parts are of quality European engineering and manufactured by a recognized OEM supplier and are not an imported copy from east bloc or pacific rim countries. AW36S ,580 3,800 AW ,390 0,30

60 PTO PARTS AND COMPONENTS 8-53 TRANSPARENCY IDENTIFICATION SYSTEM METRIC DRIVELINES & COMPONENTS For Metric Driveline Components The individual transparency cards will allow the user to easily identify driveline components. Cross and Bearing Kits may be identified by the bearing cap outside diameter and the width of the cross. Yokes may be identified by the hole in the ear and profile. Tubes and shafts may be identified by the end sections. How to use the Transparency Identification System:. Match the part to be replaced with the corresponding transparency card for identification. 2. Select the proper stock number for the replacement part. PTO

61 8-54 PTO PARTS AND COMPONENTS PART NUMBER EXPLANATION Each series has an exploded view for identification purposes. The drawing illustrates the components in the same sequence as an implement input driveline transmitting power from tractor to implement. Each component of the exploded view is identified by an eight-digit stock number to insure correct identification of each component. Example: For metric components the 02 prefix denotes a Quick Disconnect Tractor Yoke on the exploded view. METRIC DRIVELINES & COMPONENTS When ordering any component in the exploded view (for any series), be sure the part number begins with the appropriate three-digit prefix. The digit immediately following the dash (-) will be a 6, 7 or 8. A 6 indicates the item is interchangeable with Bondioli & Pavesi ONLY. A 7 indicates the item is interchangeable with Walterscheid ONLY. An 8 indicates the item is interchangeable with BOTH Bondioli & Pavesi AND Walterscheid. This interchangeability designation is used for all components EXCEPT roll pins, guards and guard bearings. The following chart lists the approximate size replacement for Metric Drivelines. These are not an exact interchange, and should be used as a general replacement guide only. Cross & Bearing Kit Cross Reference Chart for Metric Components CROSS & BEARING R-KIT CROSS & BEARING E-KIT INTERCHANGES WITH BONDIOLI & PAVESI SERIES PTO PTO N/A PTO PTO N/A PTO PTO N N/A PTO PTO N/A PTO PTO N/A PTO PTO N/A 2600 PTO PTO N/A 200 PTO PTO N/A 2400 PTO N/A II N/A PTO PTO N/A 2500 PTO PTO PTO PTO I PTO PTO PTO PTO PTO PTO (Old Series) 230 PTO PTO N/A 2280 PTO PTO N/A 2380 PTO PTO N/A 2480 PTO PTO N/A 2580 Driveline Replacement Chart INTERCHANGES WITH WALTERSCHEID SERIES WEASLER SERIES REPLACEMENT FOR: WEASLER SERIES REPLACEMENT FOR: 6 Bondioli & Pavesi & 2 Series Walterscheid 200 & 2200 Series 2 Bondioli & Pavesi 3 Series Walterscheid I Series 4 Bondioli & Pavesi 4 Series Walterscheid 2300 Series 35 Bondioli & Pavesi 5 Series Walterscheid 220 & 2400 Series 44 Bondioli & Pavesi 6 & 7 Series Walterscheid II Series 55 Bondioli & Pavesi 8 & 9 Series Walterscheid 2500 & 2600 Series

62 PTO PARTS AND COMPONENTS 8-55 SERIES Interchanges with Bondioli & Pavesi METRIC DRIVELINES & COMPONENTS AB Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO 0606 PTO 062 Quick Disconnect Repair Kit - Page 06 PTO 0268 PTO PTO /8" x 6 Spl. 3 /8" x 2 Spl. /8" x 6 Spl. 3 /8" x 6 Spl. 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO /8" (.87) /8" (2.3) Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /64" (.08) Inner Tube 26.5 (3.4 Wall) mm.024" (.38" Wall) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Roll Pin Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO /8" (.87) /8" (2.3) DIM "A" DIM "B" mm inches mm inches PTO /6" (.3) /32" (.97)

63 8-56 PTO PARTS AND COMPONENTS SERIES METRIC DRIVELINES & COMPONENTS Outer Tube 32.5 (2.6 Wall) mm.299" (.02" Wall) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Implement Yoke Shear Pin With Pin Hole mm DIM "A" inches PTO /4" (.25) PTO AE /8" PTO AE /8" Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) Guard mm inches PTO /6" (.30) Implement Yoke Round Bore With Keyway & Set Screw DIM "A" STANDARD KEYWAY mm inches mm inches AE /8" (.875) /6" (.875) PTO " (.0) 6.35 /4" (.25) PTO /4" (.25) 6.35 /4" (.25) PTO /6" (.8) /64" (.39) Order Bearings as required Easy Lock Replacement Kit PTO (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 6 Spl. QD * *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required.

64 PTO PARTS AND COMPONENTS 8-57 SERIES Clamp Yokes Round Bore SIZE (MM) SERIES AB D C B L L D H PTO AP PTO AP SIZE PTO AE0053 ¼" ¼" ( 5 /6") SERIES AB D C B L L D H 35. (36.72)

65 8-58 PTO PARTS AND COMPONENTS 2 SERIES Interchanges with Bondioli & Pavesi METRIC DRIVELINES & COMPONENTS AB2 Tractor Yoke Safety Slide Lock Repair Kit - Page 88 PTO PTO 0822 Quick Disconnect Repair Kit - Page 88 PTO PTO PTO /8" x 6 Spl. 3 /8" x 2 Spl. /8" x 6 Spl. 3 /8" x 6 Spl. 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO /6" (.94) /32" (2.4) Extended Lubrication Cross & Bearing Kit (E-Kit) Cross & Bearing Kit and Outboard Yokes interchange with Walterscheid 2200 Series. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /64" (.7) Inner Tube 29.0 (4. Wall) mm.42" (.34" Wall) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Roll Pin Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO /6" (.94) /32" (2.4) DIM "A" DIM "B" mm inches mm inches PTO /6" (.3) /64" (2.36)

66 PTO PARTS AND COMPONENTS SERIES METRIC DRIVELINES & COMPONENTS Outer Tube 36.0 (3.2 Wall) mm.47" (.34" Wall) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /64" (.45) Implement Yoke Round Bore With Keyway & Set Screw DIM "A" STANDARD KEYWAY mm inches mm inches PTO AE ¾" - - PTO /64" (.98) /6" (.3) PTO " (.0) 8.0 /4" (.25) PTO /8" (.3) 8.0 /4" (.25) PTO /6" (.8) /6" (.3) PTO /4" (.25) 6.4 /4" (.25) PTO /8" (.38) /6" (.3) Shear Pin Yoke With Pin Hole mm inches PTO /4" Rd. (.25) PTO /8" Rd. (.38) PTO AE ¾" PTO AE " PTO AP PTO AP Guard Order Bearings as required Easy Lock Replacement Kit PTO (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO " 3 /8" x 6 Spl. QD /4" Rd. w/pinhole PTO " 3 /8" x 6 Spl. QD * PTO " 3 /8" x 6 Spl. QD * PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/radial Pin Clutch *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required.

67 8-60 PTO PARTS AND COMPONENTS 2 SERIES METRIC DRIVELINES & COMPONENTS Clamp Yokes Round Bore PTO AE SIZE SERIES AB2/AW20 D C B L L D H ( 7 /8") 3 /6" SIZE SERIES AB2/AW20 D Spline L L D H PTO AP /8" SIZE (MM) SERIES AB2/AW20 D C B L L D H PTO AP PTO AP

68 PTO PARTS AND COMPONENTS SERIES Interchanges with Bondioli & Pavesi METRIC DRIVELINES & COMPONENTS AB3 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO PTO 0832 Quick Disconnect Repair Kit - Page 06 PTO PTO /8" x 6 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO /6" (.06) /4" (2.76) Extended Lubrication Cross & Bearing Kit (E-Kit) Cross & Bearing Kit and Outboard Yokes interchange with Walterscheid I Series. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /64" (.45) Inner Tube 36.0 (3.2 Wall) mm.47" (.34" Wall) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Roll Pin Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO /6" (.06) /4" (2.76) DIM "A" DIM "B" mm inches mm inches PTO /6" (.3) /64" (2.36)

69 8-62 PTO PARTS AND COMPONENTS 3 SERIES METRIC DRIVELINES & COMPONENTS Outer Tube 43.5 (3.4 Wall) mm.693" (.8" Wall) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /64" (.73) Implement Yoke Shear Pin With Pin Hole Guard mm inches PTO AE " PTO AP Bore PTO /4" (.25) PTO /64" (.98) PTO /6" (.8) PTO Implement Yoke Round Bore With Keyway & Set Screw DIM "A" STANDARD KEYWAY mm inches mm inches PTO /64" (.98) /6" (.3) PTO AE " - - PTO /6" (.8) /6" (.3) PTO /4" (.25) 6.4 /4" (.25) PTO /8" (.38) /6" (.3) Order Bearings as required OVERALL DRIVELINE Easy Lock Replacement Kit BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. PTO (4 per kit) Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 6 Spl. QD * PTO " 3 /8" x 6 Spl. QD * *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required.

70 PTO PARTS AND COMPONENTS SERIES METRIC DRIVELINES & COMPONENTS Clamp Yokes Round Bore SIZE (MM) SERIES AB3/AW D C B L L D H PTO AP PTO AP PTO AP SIZE (MM) SERIES AB3/AW D SPLINE L L D H PTO AP352 3 /8"

71 8-64 PTO PARTS AND COMPONENTS 4 SERIES Interchanges with Bondioli & Pavesi METRIC DRIVELINES & COMPONENTS AB4 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO PTO 0842 Quick Disconnect Repair Kit - Page 06 PTO PTO PTO PTO AP4220 PTO AP4234 Ball Shear PTO PTO PTO /8" x 6 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. /8" Hex 3 /8" x 2 Spl. ¾" x 20 Spl. ¾" x 6 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO /6" (.06) /6" (2.94) Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. DIM "A" DIM "B" mm inches mm inches PTO /6" (.06) /6" (2.94) Cross & Bearing Kit and Outboard Yokes interchange with Walterscheid 2300 Series. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /64" (.45) Inner Tube 36.0 (3.9 Wall) mm.47" (.57" Wall) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Roll Pin DIM "A" DIM "B" mm inches mm inches PTO /6" (.3) /8" (2.36) Outer Tube 43.5 (3.4 Wall) mm.73" (.38" Wall) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37)

72 PTO PARTS AND COMPONENTS SERIES Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /64" (.73) Implement Yoke Round Bore With Keyway & Set Screw Implement Yoke Hex Bore Guard mm inches PTO /64" (.4) Clamp Yoke PTO PTO /8" x 6 Spl. /4" Rd. METRIC DRIVELINES & COMPONENTS DIM "A" STANDARD KEYWAY mm inches mm inches PTO /6" (.8) /6" (.3) PTO /4" (.25) 6.4 /4" (.25) PTO /8" (.38) /6" (.3) PTO /2" (.50) /8" (.38) PTO /8" (.38) /64" (.39) Shear Pin With Pin Hole mm inches PTO AE /8" (.25) PTO /4" (.25) PTO /6" (.8) PTO /8" (.38) Order Bearings as required Easy Lock Replacement Kit PTO (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Clamp Yokes Round Bore SIZE SERIES AB4/AW2 D C B L L D H PTO AP /8" (34.92 mm) 5 /6" PTO AE42528 /8" (28.57 mm) ¼"

73 8-66 PTO PARTS AND COMPONENTS 4 SERIES METRIC DRIVELINES & COMPONENTS Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO " 3 /8" x 6 Spl. QD /2" Rd. PTO " 3 /8" x 6 Spl. QD 3 /8" Rd. PTO " 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO " 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO " 3 /8" x 6 Spl. QD 3 /8" Rd. PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO " 3 /8" x 6 Spl. QD /4" Rd. w/pinhole PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 6 Spl. QD * PTO " 3 /8" x 6 Spl. QD * PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/radial Pin Clutch *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required.

74 PTO PARTS AND COMPONENTS SERIES Interchanges with Bondioli & Pavesi METRIC DRIVELINES & COMPONENTS AB5 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO PTO 0652 Quick Disconnect Repair Kit - Page 06 PTO PTO PTO PTO AP50034 Ball Shear PTO PTO PTO /8" x 6 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. ¾" x 6 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO /6" (.9) /8" (3.3) Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. DIM "A" DIM "B" mm inches mm inches PTO /6" (.9) /8" (3.3) Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /32" (.78) Inner Tube 45.0 (3.9 Wall) mm.77" (.5" Wall) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Roll Pin DIM "A" DIM "B" mm inches mm inches PTO /64" (.394) /64" (2.95) Outer Tube 5.5 (3.0 Wall) mm 2.03" (.2" Wall) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37)

75 8-68 PTO PARTS AND COMPONENTS 5 SERIES METRIC DRIVELINES & COMPONENTS Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /64" (2.04) Implement Yoke Clamp Yoke PTO /8" x 2 Spl. (.38) Guard Implement Yoke Round Bore With Keyway & Set Screw DIM "A" STANDARD KEYWAY mm inches mm inches PTO AP PTO /4" (.25) 6.4 /4" (.25) PTO /8" (.38) /6" (.3) PTO /8" (.38) /64" (.5) PTO /2" (.50) /8" (.38) PTO /8" (.378) /6" (.3) Shear Pin With Pin Hole mm inches PTO /8" (.38) Order Bearings as required Easy Lock Replacement Kit PTO (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Clamp Yokes Round Bore SIZE D C B PTO AP

76 PTO PARTS AND COMPONENTS SERIES METRIC DRIVELINES & COMPONENTS Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO " 3 /8" x 6 Spl. QD /2" Rd. PTO " 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 6 Spl. QD 3 /8" Rd. PTO " 3 /8" x 6 Spl. QD 3 /8" Rd. PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 2 Spl. QD /2" Rd. PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 6 Spl. QD * PTO " 3 /8" x 6 Spl. QD * PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/overrunning Clutch *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required.

77 8-70 PTO PARTS AND COMPONENTS 6 SERIES Interchanges with Bondioli & Pavesi METRIC DRIVELINES & COMPONENTS AB6 Cross & Bearing Kit and Outboard Yokes interchange with Walterscheid 220 Series. Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO PTO PTO 0862 PTO PTO PTO PTO PTO AP /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Quick Disconnect Repair Kit - Page 06 Ball Shear PTO PTO /8" x 6 Spl. 3 /8" x 2 Spl. /8" x Hex 3 /4" x 20 Spl. ¾" x 6 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. PTO /8" x 2 Spl. Auto-Lok Repair Kit - Page 06 PTO Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO /6" (.9) /8" (3.62) Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke 3 /8" x 6 Spl. DIM "A" DIM "B" mm inches mm inches PTO /6" (.9) /8" (3.62) Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /32" (.78) Inner Tube 45.0 (3.9 Wall) mm.77" (.54" Wall) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Roll Pin DIM "A" DIM "B" mm inches mm inches PTO /64" (.39) /32" (3.5) Outer Tube 54.0 (4.5 Wall) mm 2.3" (.8" Wall) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37)

78 PTO PARTS AND COMPONENTS SERIES METRIC DRIVELINES & COMPONENTS Outer Profile Yoke Implement Yoke With Bearing Groove (Guard must rotate freely on yoke) Hex Bore mm inches PTO /8" (2.3) PTO /64" Hex (.4), 28.9 mm Clamp Yoke Implement Yoke Round Bore With Keyway & Set Screw DIM "A" STANDARD KEYWAY mm inches mm inches PTO /4" (.25) 6.4 /4" (.25) PTO /8" (.38) /6" (.3) PTO /2" (.50) /8" (.38) PTO /4" (.75) /8" (.38) PTO /8" (.38) /64" (.39) PTO /64" (.57) /32" (.47) PTO PTO PTO PTO AE PTO AE62253 PTO AE Guard 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. /8" Rd & Kw ¼" Rd & Kw 3 /8" Rd & Kw PTO AE ⅝" (.625) - - Shear Pin With Pin Hole mm inches PTO /8" (.38) PTO /4" (.25) Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Easy Lock Replacement Kit PTO (4 per kit) Clamp Yokes Round Bore SIZE D C B PTO AP PTO AP PTO AP *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required.

79 8-72 PTO PARTS AND COMPONENTS 6 SERIES METRIC DRIVELINES & COMPONENTS Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO " 3 /8" x 6 Spl. QD /2" Rd. PTO " 3 /8" x 6 Spl. QD 3 /4" Rd. PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 2 Spl. QD /2" Rd. PTO " 3 /8" x 2 Spl. QD /2" Rd. PTO " 3 /8" x 6 Spl. QD * PTO " 3 /8" x 6 Spl. QD * PTO " 3 /8" x 2 Spl. QD 3 /8" x 2 Spl. QD PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO " 3 /8" x 6 Spl. QD 3 /4" x 20 Spl. w/friction Clutch PTO " 3 /4" x 20 Spl. QD 3 /4" x 20 Spl. w/friction Clutch PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/overrunning Clutch *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required.

80 PTO PARTS AND COMPONENTS N SERIES Interchanges with Bondioli & Pavesi METRIC DRIVELINES & COMPONENTS AB7N Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO PTO PTO 0672 Quick Disconnect Repair Kit - Page 06 PTO PTO /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO /8" (.37) /64" (3.70) AB7* DIM "A" DIM "B" mm inches mm inches PTO /6" (.9) /6" (4.9) PTO /6" (.9) /6" (4.9) *Old Bondioli & Pavesi 7 Series is interchangeable with Walterscheid 230 Series. Original part identification begins with 23. PTO PTO Ball Shear PTO PTO /8" x 2 Spl. 3 /4" x 6 Spl. 3 /8" x 6 Spl. 3 /8" x 2 Spl. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /32" (.78) Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO /8" (.37) /64" (3.70) Inner Tube 45.0 (5.4 Wall) mm.77" (.2" Wall) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37)

81 8-74 PTO PARTS AND COMPONENTS 7N SERIES METRIC DRIVELINES & COMPONENTS Roll Pin Outer Tube 54.0 (4.5 Wall) mm 2.3" (.8" Wall) DIM "A" DIM "B" mm inches mm inches PTO /32" (.39) /32" (3.5) Implement Yoke Round Bore With Keyway & Set Screw DIM "A" STANDARD KEYWAY mm inches mm inches PTO /8" (.38) /6" (.3) PTO /4" (.75) /8" (.38) PTO /64" (.57) 2.7 /2" (.50) Guard m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /8" (2.3) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Easy Lock Replacement Kit PTO (4 per kit) Clamp Yokes SIZE D C B D SIZE SPLINE PTO AP7N PTO AP7N538 3 /8" 6

82 PTO PARTS AND COMPONENTS N SERIES METRIC DRIVELINES & COMPONENTS Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO " 3 /8" x 6 Spl. QD 3 /4" Rd. PTO " 3 /8" x 6 Spl. QD * PTO " 3 /8" x 6 Spl. QD * *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required. For a selection of 3 point hitch parts, see Section 22 of this catalogue.

83 8-76 PTO PARTS AND COMPONENTS 8 SERIES Interchanges with Bondioli & Pavesi METRIC DRIVELINES & COMPONENTS AB8 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO PTO PTO 0682 Quick Disconnect Repair Kit - Page 06 PTO PTO PTO PTO Ball Shear PTO PTO PTO Auto-Lok Repair Kit - Page 88 PTO /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /4" x 6 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. Cross & Bearing Kit (R-Kit) Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO (Old Series 8) mm inches /32" (.78) PTO /8" (2.3) Inner Tube 54.0 (4.5 Wall) mm 2.3" (.77" Wall) DIM "A" m DIM "B" mm inches mm inches PTO /8" (.38) /6" (4.9) inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Roll Pin Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO /8" (.38) /6" (4.9) DIM "A" DIM "B" mm inches mm inches PTO /6" (.3) /32" (3.5) PTO /32" (.47) /32" (3.5)

84 PTO PARTS AND COMPONENTS SERIES METRIC DRIVELINES & COMPONENTS Outer Tube 63.0 (4. Wall) mm 2.48" (.6" Wall) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) Implement Yoke Clamp Yoke PTO PTO PTO PTO AP PTO Guard 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. ¾" x 6 Spl. ¾" x 6 Spl. (Bondioli) mm inches PTO /64" (2.48) Implement Yoke Round Bore With Keyway & Set Screw Spline Bore With Pinhole PTO /8" x 6 Spl. DIM "A" STANDARD KEYWAY mm inches mm inches PTO /8" (.38) /6" (.3) PTO /2" (.50) /6" (.3) PTO /4" (.75) /8" (.38) PTO " (2.00) 2.7 /2" (.50) PTO AP PTO AE /8" (.625) - - Order Bearings as required Easy Lock Replacement Kit PTO (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Clamp Yokes Hub Yokes With Spring Pin Hole SIZE D C B PTO AP SIZE D F PTO AP

85 8-78 PTO PARTS AND COMPONENTS 8 SERIES METRIC DRIVELINES & COMPONENTS Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO " 3 /8" x 6 Spl. QD 3 /4" Rd. PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO " 3 /8" x 6 Spl. QD * PTO " 3 /8" x 6 Spl. QD * PTO " 3 /8" x 2 Spl. QD 3 /8" x 2 Spl. QD *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required. For a wide selection of combine repair parts, visit Section 6.

86 PTO PARTS AND COMPONENTS SERIES Interchanges with Bondioli & Pavesi METRIC DRIVELINES & COMPONENTS AB9 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO PTO PTO 0692 Quick Disconnect Repair Kit - Page 06 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /8" (2.3) Inner Profile Tube PTO PTO PTO PTO AP /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. ¾" x 6 Spl (4.9 Wall) mm 2.3" (.9" Wall) Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) DIM "A" DIM "B" mm inches mm inches PTO /64" (.6) 08 4 /4" (4.25) Extended Lubrication Cross & Bearing Kit (E-Kit) Roll Pin Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO /64" (.6) 08 4 /4" (4.25) DIM "A" DIM "B" mm inches mm inches PTO /64" (.39) /32" (3.5) PTO /32" (.47) /32" (3.5)

87 8-80 PTO PARTS AND COMPONENTS 9 SERIES METRIC DRIVELINES & COMPONENTS Outer Tube Guard 63.0 (4. Wall) mm 2.48" (.6" Wall) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /64" (2.48) Implement Yoke Round Bore With Keyway & Set Screw PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Easy Lock Replacement Kit PTO (4 per kit) STANDARD KEYWAY PTO /8" (.38) 5 /6" (.3) PTO /2" (.50) 3 /8" (.38) Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO " 3 /8" x 6 Spl. QD * PTO " 3 /8" x 6 Spl. QD * *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required.

88 PTO PARTS AND COMPONENTS SERIES - METRIC DRIVELINE COMPONENTS INTERCHANGES WITH BONDIOLI & PAVESI Tractor Yoke QUICK DISCONNECT DIM. A BORE PTO /8 x 6 spline PTO /4 x 6 spline PTO /4 x 20 spline PTO /8 x 2 spline Cross & Bearing Kit Snap Ring Located in Yoke Roll Pin DIM. A DIM. B PTO mm 80 mm Outer Tube 63.0 mm (4.0 wall) DIM. A BORE DIM. B BORE PTO mm 8 mm PTO mm Inner Profile Yoke Outer Profile Yoke With Bearing Groove PTO DIM. A BORE 54 mm PTO DIM. A BORE 66 mm Inner Tube 54.0 mm (6.0 wall) Plastic Guard Without Bearings PTO mm OVERALL DRIVELINE BEARINGS PTO mm (48 ) CALL

89 8-82 PTO PARTS AND COMPONENTS 0 SERIES - METRIC DRIVELINE COMPONENTS Implement Yoke Clamp Yoke ROUND BORE With Keyway & Pin Hole DIM A BORE PIN HOLE SIZE PTO /2 3 /8 PTO /4 3 /8 PTO /6 /2 PTO /2 ROUND BORE With Keyway & Set Screw PTO PTO DESCRIPTION 3 /4 x 6 spline ¾" x 20 spline BORE STD. KEYWAY PTO /8 5 /6 SHEAVES!!! Westward Parts has available a full line of both QD and taper lok style sheaves. Contact your nearest branch for price & availability.

90 PTO PARTS AND COMPONENTS /00 SERIES Interchanges with Walterscheid METRIC DRIVELINES & COMPONENTS AW0 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO 0706 PTO /8" x 6 Spl. 3 /8" x 2 Spl. mm inches Quick Disconnect Repair Kit - Page 06 PTO PTO /8" x 6 Spl. 3 /8" x 2 Spl. PTO /6" (.94) Inner Tube (Solid) 23.5 mm.93" Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke m inches DIM "A" DIM "B" mm inches mm inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) PTO /8" (.87) /64" (2.7) Extended Lubrication Cross & Bearing Kit (E-Kit) Roll Pin Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches DIM "A" DIM "B" mm inches mm inches PTO /6" (.3) /32" (.97) PTO /8" (.87) /64" (2.7)

91 8-84 PTO PARTS AND COMPONENTS 200/00 SERIES METRIC DRIVELINES & COMPONENTS Outer Tube 30.0 (2.9 Wall) mm 3 /6" (.9" Wall) Implement Yoke Shear Pin With Pin Hole m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO " (.0) PTO /4" (.25) PTO /64" (.98) PTO /6" (.8) PTO AE ¾" (.75) Guard Implement Yoke Round Bore With Keyway & Set Screw mm inches PTO /6" (.8) STANDARD KEYWAY mm inches mm inches PTO /64" (.98) /6" (.3) PTO /6" (.8) /6" (.3) PTO AE /8" (.25) /6" (.3) Order Bearings as required OVERALL DRIVELINE Easy Lock Replacement Kit BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. PTO (4 per kit)

92 PTO PARTS AND COMPONENTS /200 SERIES Interchanges with Walterscheid METRIC DRIVELINES & COMPONENTS AW20 Cross & Bearing Kit and Outboard Yokes interchange with Bondioli 2 Series. Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO PTO 0822 Quick Disconnect Repair Kit - Page 06 3 /8" x 6 Spl. 3 /8" x 2 Spl. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /64" (.36) PTO PTO PTO /8" x 6 Spl. /8" x 6 Spl. 3 /8" x 2 Spl. Inner Tube 34.5 (4.0 Wall) mm.36" (.6 Wall) Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) DIM "A" DIM "B" mm inches mm inches 5 PTO /6" (.94) /32" (2.4) Roll Pin Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches DIM "A" DIM "B" mm inches mm inches 25 PTO /64" (.39) /64" (2.36) PTO /6" (.94) /32" (2.4)

93 8-86 PTO PARTS AND COMPONENTS 2200/200 SERIES METRIC DRIVELINES & COMPONENTS Clamp Yokes Profile Yokes Outer Tube 4.0 (2.9 Wall) mm.6" (." Wall) With Bearing Groove (Guard must rotate freely on yoke) inches m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Outer Profile Yoke D mm SIZE PTO AE0525 " 25.4mm ¼" PTO AE053 ¼" 3.75mm ¼"( 5 /6") 35. C B SIZE D B F PTO AP PTO AP Implement Yoke Shear Pin mm inches PTO (with 3 /8" Pinhole) 3.8 /4" (.25) PTO (with /2" Pinhole) /8" (.38) PTO (with 5 /6" Pinhole) /64" (.98) PTO (with 25 /64" Pinhole) /6" (.8) Guard Implement Yoke Round Bore With Keyway & Set Screw mm inches PTO /8" (.63) STANDARD KEYWAY mm inches mm inches PTO /64" (.98) /6" (.3) PTO " (.0) 6.4 /4" (.25) PTO /6" (.8) /6" (.3) PTO /4" (.25) 6.4 /4" (.25) PTO /8" (.38) /6" (.3) PTO /8" (.3) 6.4 /4" (.25) PTO /4" (.25) /6" (.3) Order Bearings as required Easy Lock Replacement Kit PTO (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes.

94 PTO PARTS AND COMPONENTS 8-87 I SERIES Interchanges with Walterscheid METRIC DRIVELINES & COMPONENTS AW Cross & Bearing Kit and Outboard Yokes interchange with Bondioli 3 Series. Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO PTO 0832 Quick Disconnect Repair Kit - Page 06 3 /8" x 6 Spl. 3 /8" x 2 Spl. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /64" (.36) PTO PTO /8" x 6 Spl. 3 /8" x 2 Spl. Inner Tube 34.5 (4.0 Wall) mm.36" (.6 Wall) Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke m inches PTO /6" (59.06) PTO /8" (8.) DIM "A" DIM "B" mm inches mm inches PTO /6" (.06) /4" (2.76) PTO /8" (39.37) Roll Pin Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches DIM "A" DIM "B" mm inches mm inches 25 PTO /64" (.39) /6" (2.56) PTO /6" (.06) /4" (2.76)

95 8-88 PTO PARTS AND COMPONENTS I SERIES METRIC DRIVELINES & COMPONENTS Outer Tube 4.0 (2.9 Wall) mm.6" (." Wall) Implement Yoke Shear Pin With Pin Hole m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) mm inches PTO /4" (.25) PTO /64" (.98) PTO /6" (.8) PTO /8" (.38) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) Guard Implement Yoke Round Bore With Keyway & Set Screw mm inches PTO /8" (.63) STANDARD KEYWAY mm inches mm inches PTO /64" (.98) /6" (.3) PTO /6" (.8) /6" (.3) PTO /4" (.25)) 6.4 /4" (.25) PTO /8" (.37) /6" (.3) Order Bearings as required Easy Lock Replacement Kit PTO (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes.

96 PTO PARTS AND COMPONENTS /20 SERIES Interchanges with Walterscheid METRIC DRIVELINES & COMPONENTS AW2 Cross & Bearing Kit and Outboard Yokes interchange with Bondioli 4 Series. Tractor Yoke Safety Slide Lock Repair Kit - Page 06 Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke PTO /8" x 6 Spl. PTO 0842 Quick Disconnect Repair Kit - Page 06 3 /8" x 2 Spl. DIM "A" DIM "B" mm inches mm inches PTO /6" (.06) /6" (2.94) PTO PTO PTO Ball Shear PTO PTO PTO /8" x 6 Spl. /8" Hex 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /32" (.36) PTO /6" (.56) Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke Inner Tube 34.5 (4.0 Wall) mm.36" (.6 Wall) DIM "A" DIM "B" mm inches mm inches PTO /6" (.06) /6" (2.94) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37)

97 8-90 PTO PARTS AND COMPONENTS 2300/20 SERIES METRIC DRIVELINES & COMPONENTS Roll Pin DIM "A" DIM "B" mm inches mm inches PTO /64" (.39) /6" (2.56) Outer Tube 4.0 (2.9 Wall) mm.6" (." Wall) DIM "A" mm m inches PTO (3.0 Wall).5 59 /6" (59.06) PTO (3.0 Wall) /8" (8.) PTO (3.0 Wall) /8" (39.37) Implement Yoke Shear Pin With Pin Hole Guard mm inches PTO /4" (.25) PTO /6" (.8) PTO /8" (.38) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /8" (.63) PTO /64" (.89) Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Implement Yoke Easy Lock Replacement Kit Round Bore With Keyway & Set Screw PTO (4 per kit) STANDARD KEYWAY mm inches mm inches PTO /6" (.8) /6" (.3) PTO /4" (.25) 6.4 /4" (.25) PTO /8" (.38) /6" (.3) PTO /2" (.50) /8" (.38) PTO /8" (.38) /64" (.39)

98 PTO PARTS AND COMPONENTS /720 SERIES Interchanges with Walterscheid METRIC DRIVELINES & COMPONENTS AW22 Cross & Bearing Kit and Outboard Yokes interchange with Bondioli 6 Series. Tractor Yoke Safety Slide Lock Repair Kit - Page 06 Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke PTO /8" x 6 Spl. PTO PTO /4" x 20 Spl. 3 /8" x 2 Spl. Quick Disconnect Repair Kit - Page 8806 DIM "A" DIM "B" mm inches mm inches PTO /6" (.9) /8" (3.62) PTO PTO PTO PTO PTO AP /8" x 6 Spl. /8" Hex 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /4" x 6 Spl. Bore Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) Ball Shear mm inches PTO /8" x 6 Spl. PTO /6" (.56) PTO /4" x 20 Spl. PTO /8" x 2 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke Inner Tube 39.5 (4.5 Wall) mm.56" (.8 Wall) DIM "A" DIM "B" mm inches mm inches PTO /6" (.9) /8" (3.62) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37)

99 8-92 PTO PARTS AND COMPONENTS 220/720 SERIES METRIC DRIVELINES & COMPONENTS Roll Pin DIM "A" DIM "B" mm inches mm inches 25 PTO /64" (.39) /32" (3.0) Outer Tube Implement Yoke Shear Pin With Pin Hole mm inches PTO /8" (.38) PTO /4" (.25) 48.0 (3.8 Wall) mm.89" (.5" Wall) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Guard Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /64" (.89) Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Implement Yoke Easy Lock Replacement Kit Round Bore With Keyway & Set Screw PTO (4 per kit) STANDARD KEYWAY mm inches mm inches PTO /4" (.25) 6.4 /4" (.25) PTO /8" (.38) /6" (.3) PTO /2" (.50) /8" (.38) PTO /4" (.75) /8" (.38) PTO /8" (.38) /64" (.39) PTO /64" (.57) /32" (.47)

100 PTO PARTS AND COMPONENTS SERIES Interchanges with Walterscheid METRIC DRIVELINES & COMPONENTS AW35 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO PTO PTO 0762 Quick Disconnect Repair Kit - Page 06 PTO PTO PTO PTO AP3534 Ball Shear PTO PTO PTO /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. ¾" x 6 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO /4" (.26) " (3.00) Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO /4" (.26) " (3.00) Inner Profile Yoke PTO (Lemon) PTO (Star) Inner Tube DIM "A" PROFILE DIM "B" PROFILE mm inches mm inches /6" (.56) /64" (2.02) DIM "A" DIM "B" m inches PTO (4.5 wall) /6" (59.06) PTO (6.0 wall).5 59 /6" (59.06) PTO (4.5 wall) /8" (8.) PTO (6.0 wall) /8" (8.) PTO (4.5 wall) /8" (39.37) PTO (6.0 wall) /8" (39.37) Roll Pin DIM "A" DIM "B" mm inches mm inches PTO /64" (.39) /64" (2.95)

101 8-94 PTO PARTS AND COMPONENTS 2400 SERIES METRIC DRIVELINES & COMPONENTS Outer Tube Implement Yoke Shear Pin With Pin Hole DIM "A" DIM "B" m inches PTO (4.0 Wall) /6" (59.06) PTO (4.0 Wall).5 59 /6" (59.06) PTO (4.0 Wall) /8" (8.) PTO (4.0 Wall) /8" (8.) PTO (4.0 Wall) /8" (39.37) PTO (4.0 Wall) /8" (39.37) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) DIM "B" BORE mm inches mm inches PTO /8" (.89) - - PTO /32" (2.40) mm inches PTO AP PTO AE /4" PTO /8" (.38) PTO /8" (.38) PTO (with 3 mm Pin Hole) /8" (.38) PTO (with 3 mm Pin Hole) /64" (.57) PTO AP Clamp Yoke Guard PTO /4" x 20 Spl. (.75) PTO /8" x 2 Spl. (.38) PTO /8" x 6 Spl. (.38) PTO AP mm -Rd. & Kw PTO AP mm -Rd. & Kw Implement Yoke Round Bore With Keyway & Set Screw STANDARD KEYWAY mm inches mm inches PTO AP PTO /4" (.25) 6.4 /4" (.25) PTO /8" (.38) /6" (.3) PTO /8" (.38) /64" (.39) PTO /64" (.57) /32" (.47) PTO AP Order Bearings as required Easy Lock Replacement Kit PTO (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO " 3 /8" x 6 Spl. 3 /8" x 6 Spl. PTO " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. with Overrunning Clutch

102 PTO PARTS AND COMPONENTS SERIES Interchanges with Walterscheid METRIC DRIVELINES & COMPONENTS AW36 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO PTO PTO 0792 Quick Disconnect Repair Kit - Page 06 PTO PTO PTO /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO /64" (.42) /2" (3.50) Extended Lubrication Cross & Bearing Kit (E-Kit) Auto-Lok Tractor Yoke Auto-Lok Repair Kit - Page 06 PTO Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /64" (2.02) Inner Tube 3 /8" x 6 Spl. 5.0 mm (6.0 Wall) mm 2.00" (.24" Wall) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Roll Pin Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO /64" (.42) /2" (3.50) DIM "A" DIM "B" mm inches mm inches 25 PTO /64" (.39) /64" (3.54)

103 8-96 PTO PARTS AND COMPONENTS 2500 SERIES METRIC DRIVELINES & COMPONENTS Outer Tube 6.0 (4.3 Wall) mm 2.40" (.7" Wall) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO /32" (2.40) Implement Yoke Shear Pin With Pin Hole Clamp Yoke Guard mm inches PTO /8" (.38) PTO /2" (.50) PTO AP PTO AP PTO /8" x 6 Spl. PTO /4" x 6 Spl. PTO /4" x 20 Spl. PTO /8" x 2 Spl. PTO AP mm Bore Implement Yoke Round Bore With Keyway & Set Screw STANDARD KEYWAY mm inches mm inches PTO /8" (.38) /6" (.3) PTO /2" (.50) /8" (.37) PTO /8" (.38) /64" (.39) Spline Bore With Pin Hole Order Bearings as required OVERALL DRIVELINE Easy Lock Replacement Kit BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. PTO /8" x 2 Spl. PTO (4 per kit) Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO (Star Tubing) 55" 3 /8" x 6 Spl. QD 3 /8" x 2 Spl. with Pinhole PTO " 3 /4" x 20 Spl. QD 3 /8" x 2 Spl. with Friction Clutch PTO " 3 /8" x 2 Spl. 3 /8" x 6 Spl. with Friction Clutch

104 PTO PARTS AND COMPONENTS SERIES Interchanges with Walterscheid METRIC DRIVELINES & COMPONENTS AW26 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO /8" x 6 Spl. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO /4" x 20 Spl. PTO 0702 Quick Disconnect Repair Kit - Page 06 3 /8" x 2 Spl. DIM "A" PROFILE mm inches PTO /32" (2.40) PTO PTO /8" x 6 Spl. 3 /4" x 20 Spl. Inner Tube PTO /8" x 2 Spl. Cross & Bearing Kit (R-Kit) 6.0 mm (4.3 Wall) mm 2.40" (.7" Wall) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO /32" (.65) /32" (4.09) m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Extended Lubrication Cross & Bearing Kit (E-Kit) Roll Pin Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches DIM "A" DIM "B" mm inches mm inches PTO /32" (.65) /32" (4.09) PTO /64" (.39) /64" (3.54)

105 8-98 PTO PARTS AND COMPONENTS 2600 SERIES METRIC DRIVELINES & COMPONENTS Outer Tube 7.5 (4.9 Wall) mm 2.8" (.9" Wall) Implement Yoke Round Bore With Keyway & Set Screw m inches PTO /6" (59.06) PTO /8" (8.) PTO /8" (39.37) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) STANDARD KEYWAY mm inches mm inches PTO /2" (.50) /8" (.37) PTO /8" (.63) /8" (.37) PTO /4" (.75) /8" (.37) PTO " (2.00) 2.7 /2" (.50) Easy Lock Replacement Kit mm inches PTO /64" (2.82) PTO (4 per kit) Guard Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes.

106 PTO PARTS AND COMPONENTS 8-99 II SERIES Interchanges with Walterscheid METRIC DRIVELINES & COMPONENTS AW2 Tractor Yoke Quick Disconnect Repair Kit - Page 06 PTO PTO PTO AP234 PTO AP220 Cross & Bearing Kit 3 /8" x 6 Spl. 3 /8" x 2 Spl. ¾" x 6 Spl. ¾" x 20 Spl. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm DIM "A" PROFILE inches PTO /6" (.56) Outer Profile Yoke Snap Ring Located in Bushing With Bearing Groove (Guard must rotate freely on yoke) DIM "A" DIM "B" mm inches mm inches PTO /32" (.34) /64" (3.55) DIM "A" PROFILE mm inches PTO /8" (.89)

107 8-00 PTO PARTS AND COMPONENTS II SERIES Clamp Yokes METRIC DRIVELINES & COMPONENTS SIZE D C B PTO AP PTO AP SIZE D SPLINE PTO AP252 3 /8" 2 Hub Yokes SIZE D F PTO AP

108 PTO PARTS AND COMPONENTS 8-0 PROFILE SHAFTING AND TUBING METRIC DRIVELINES & COMPONENTS SERIES METERS INCHES USE AS ByPy PTO /6" Inner ByPy PTO /6" Inner ByPy PTO /8" Inner ByPy PTO /6" Outer ByPy PTO /6" Outer ByPy PTO /8" Outer ByPy 2 PTO /6" Inner ByPy 2 PTO /6" Inner ByPy 2 PTO /8" Inner ByPy 2 PTO /6" Outer ByPy 2 PTO /6" Outer ByPy 2 PTO /8" Outer ByPy 3 PTO /6" Inner ByPy 3 PTO /6" Inner ByPy 3 PTO /8" Inner ByPy 3 & 4 PTO /6" Outer ByPy 3 & 4 PTO /6" Outer ByPy 3 & 4 PTO /8" Outer ByPy 4 PTO /6" Inner ByPy 4 PTO /6" Inner ByPy 4 PTO /8" Inner ByPy 5 & 6 PTO /6" Inner ByPy 5 & 6 PTO /6" Inner ByPy 5 & 6 PTO /8" Inner ByPy 5 PTO /6" Outer ByPy 5 PTO /6" Outer ByPy 5 PTO /8" Outer ByPy 6, 7N & 8 PTO /6" Outer ByPy 6, 7N & 8 PTO /6" Outer ByPy 6, 7N & 8 PTO /8" Outer ByPy 7N PTO /6" Inner ByPy 7N PTO /6" Inner ByPy 7N PTO /8" Inner ByPy 9 PTO /6" Inner ByPy 9 PTO /6" Inner ByPy 9 PTO /8" Inner ByPy 8 & 9 PTO /6" Outer ByPy 8 & 9 PTO /6" Outer ByPy 8 & 9 PTO /8" Outer AW0 PTO /6" Inner AW0 PTO /6" Inner AW0 PTO /8" Inner AW0 PTO /6" Outer AW0 PTO /6" Outer AW0 PTO /8" Outer AW & 2 PTO /6" Inner AW & 2 PTO /6" Inner AW & 2 PTO /8" Inner AW & 2 PTO /6" Outer SERIES METERS INCHES USE AS AW & 2 PTO /6" Outer AW & 2 PTO /8" Outer AW35 (Lemon) PTO /6" Inner AW35 (Lemon) PTO /6" Inner AW35 (Lemon) PTO /8" Inner AW35 (Lemon) PTO /6" Outer AW35 (Lemon) PTO /6" Outer AW35 (Lemon) PTO /8" Outer AW35 & 36 (Star) PTO /6" Inner AW35 & 36 (Star) PTO /6" Inner AW35 & 36 (Star) PTO /8" Inner AW36 (Star) PTO /6" Outer AW36 (Star) PTO /6" Outer AW36 (Star) PTO /8" Outer AW26 PTO /6" Inner AW26 PTO /6" Inner AW26 PTO /8" Inner AW26 PTO /6" Outer AW26 PTO /6" Outer AW26 PTO /8" Outer German-Style Shafting & Tubing Lemon & Star Profile Italian-Style Shafting & Tubing Tri-Lobe Profile

109 8-02 PTO PARTS AND COMPONENTS LEMON TUBES (Fits Walterscheid & Agdrive) All tubes are 50 cm long. A B C PTO AP23050 Solid 23.5 mm 3 mm PTO mm 3 mm PTO mm 39 mm PTO mm 40 mm PTO mm 48 mm PTO mm 49 mm PTO mm 57.5 mm STAR PROFILE TUBES All tubes are 50 cm long. PTO PTO TRIANGLE TUBES (Fits Bondioli & Pavesi) All tubes are 50 cm long. A B PTO PTO PTO PTO mm 33 mm 29 mm 36 mm PTO mm PTO PTO PTO PTO mm 43 mm 45 mm 52 mm A B PTO PTO mm 54 mm PTO mm PTO PTO mm 63 mm PTO mm

110 PTO PARTS AND COMPONENTS 8-03 METRIC REPLACEMENT DRIVELINES Interchanges with Bondioli & Pavesi and Walterscheid METRIC DRIVELINES & COMPONENTS Fertilizer Spreader SERIES OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO ByPy 27" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO ByPy 35" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD Post Hole Digger SERIES OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO ByPy 2 (Light Duty) 52" 3 /8" x 6 Spl. QD /4" Rd. with Pinhole PTO ByPy 4 (Heavy Duty) 53" 3 /8" x 6 Spl. QD /4" Rd. with Pinhole Finishing Mower SERIES OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO ByPy 3 40" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO ByPy 4 46" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO ByPy 6 37" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD Catfish Pond Driveline SERIES OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO ByPy 4 48" 3 /8" x 6 Spl. QD /2" Rd. PTO ByPy 5 48" 3 /8" x 6 Spl. QD /2" Rd. PTO ByPy 6 48" 3 /8" x 6 Spl. QD /2" Rd. PTO ByPy 5 48" 3 /8" x 2 Spl. QD /2" Rd. PTO ByPy 6 48" 3 /8" x 2 Spl. QD /2" Rd. Hammer Mill SERIES OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO ByPy 6 48" 3 /8" x 6 Spl. QD 3 /4" Rd. PTO ByPy 7 48" 3 /8" x 6 Spl. QD 3 /4" Rd.

111 8-04 PTO PARTS AND COMPONENTS METRIC REPLACEMENT DRIVELINES Interchanges with Bondioli & Pavesi and Walterscheid METRIC DRIVELINES & COMPONENTS All Purpose Drivelines SERIES OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO ByPy 37" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO ByPy 2 47" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO ByPy 4 38" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO ByPy 4 55" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO ByPy 4 48" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO ByPy 5 43" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO ByPy 5 55" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO ByPy 6 42" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO ByPy 6 44" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO ByPy 6 55" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO ByPy 6 57" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO ByPy 8 46" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO ByPy 8 57" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO ByPy 5 42" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO ByPy 6 66" 3 /8" x 2 Spl. QD /2" Rd. PTO ByPy 48" 3 /8" x 6 Spl. QD * PTO ByPy 2 48" 3 /8" x 6 Spl. QD * PTO ByPy 2 60" 3 /8" x 6 Spl. QD * PTO ByPy 3 48" 3 /8" x 6 Spl. QD * PTO ByPy 3 60" 3 /8" x 6 Spl. QD * PTO ByPy 4 48" 3 /8" x 6 Spl. QD * PTO ByPy 4 60" 3 /8" x 6 Spl. QD * PTO ByPy 5 48" 3 /8" x 6 Spl. QD * PTO ByPy 5 60" 3 /8" x 6 Spl. QD * PTO ByPy 6 48" 3 /8" x 6 Spl. QD * PTO ByPy 6 60" 3 /8" x 6 Spl. QD * PTO ByPy 7 48" 3 /8" x 6 Spl. QD * PTO ByPy 7 60" 3 /8" x 6 Spl. QD * PTO ByPy 8 48" 3 /8" x 6 Spl. QD * PTO ByPy 8 60" 3 /8" x 6 Spl. QD * PTO ByPy 9 48" 3 /8" x 6 Spl. QD * PTO ByPy 9 60" 3 /8" x 6 Spl. QD * PTO ByPy 6 44" 3 /8" x 2 Spl. QD 3 /8" x 2 Spl. QD PTO ByPy 8 46" 3 /8" x 2 Spl. QD 3 /8" x 2 Spl. QD PTO W/S " 3 /8" x 6 Spl. QD 30-mm Friction Clutch PTO W/S " 3 /8" x 6 Spl. QD 30-mm Friction Clutch *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required. Peanut Harvester Non-CV PTO (Star) SERIES W/S 2500 OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE 55" 3 /4" x 20 Spl. QD 3 /8" x 2 Spl. QD

112 PTO PARTS AND COMPONENTS 8-05 METRIC REPLACEMENT DRIVELINES Interchanges with Bondioli & Pavesi and Walterscheid Rotary Cutter METRIC DRIVELINES & COMPONENTS SERIES TYPE OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO ByPy 2 Pull (Towed) 5" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO ByPy 4 4 ft. Lift (3-pt Hitch) 32" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO ByPy 4 5 ft. Lift (3-pt Hitch) 36" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO ByPy 4 6 ft. Lift (3-pt Hitch) 42" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO ByPy 4 Pull (Towed) 5" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO ByPy 5 6 ft. Lift (3-pt Hitch) 42" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO ByPy 5 6 ft. Heavy Duty 46" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO ByPy 5 6 ft. Lift (3-pt Hitch) 5" 3 /8" x 6 Spl. QD 3 /8" Rd. PTO ByPy 6 7 ft. Lift (3-pt Hitch) 52" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole Rotary Cutter/Tiller SERIES TYPE OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO ByPy 4 Pull (Towed) 38" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO ByPy 5 Pull (Towed) 46" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO ByPy 6 7 ft. Lift (3-pt Hitch) 54" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO ByPy 2 Pull (Towed) 33" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO ByPy 4 Pull (Towed) 36" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO ByPy 6 7 ft. Lift (3-pt Hitch) 60" 3 /8" x 6 Spl. QD 3 /4" x 20 Spl. w/friction Clutch PTO ByPy 6 7 ft. Lift (3-pt Hitch) 6" 3 /8" x 6 Spl. QD 3 /4" x 20 Spl. w/friction Clutch Hay Tedder SERIES TYPE OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO ByPy 2* 2-Rotor 52" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. Radial Pin Clutch PTO ByPy 4** 4-Rotor 54" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. Radial Pin Clutch PTO W/S " 3 /4" x 20 Spl. QD 3 /4" x 2 Spl. QD Radial Pin Clutch Disc Mower SERIES OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO ByPy 5 38" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD w/overrunning Clutch PTO ByPy 6 39" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD w/overrunning Clutch PTO W/S " 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD w/overrunning Clutch

113 8-06 PTO PARTS AND COMPONENTS Q.D. REPAIR KIT METRIC DRIVELINES & COMPONENTS PTO DESCRIPTION Repair kit for 3 /8" x 6 Spl. & 3 /8" x 2 Spl. Bondioli & Pavesi Series, 2, 3, 4, 5, 6, 7N, 8 and 9 PTO PTO DESCRIPTION Repair kit for 7N Series 3 /4" x 20 Spl. PTO DESCRIPTION Repair kit for 3 /4" x 20 Spl. All Walterscheid Series Spring Internal to Yoke PTO DESCRIPTION Repair kit for 3 /8" x 6 Spl. & 3 /8" x 2 Spl. All Walterscheid Series LOCKING DEVICE REPAIR KIT *Auto-Lok/Safety Slide Lock PTO DESCRIPTION Repair Kit for Weasler Auto-Lok and Safety Slide Lock 6 Spline & 2 Spline *This repair kit contains both balls & pawls. When repairing the "Safety Slide Lock" use the pawls only and discard the balls. When repairing the "Auto-Lok" use both the balls and the pawls.

114 PTO PARTS AND COMPONENTS 8-07 PARTS FOR FRICTION CLUTCHES CLUTCH DISC. DIA. (MM) DISC QTY REQ. SPRING PTO AK PTO AB PTO AB206 8 PTO AK PTO AB PTO AB207 8 PTO AK PTO AB PTO AB207 8 PTO AK PTO AB PTO AB207 8 PTO AK PTO AB PTO AB207 8 PTO AK7N PTO AB PTO AB207 8 PTO AK PTO AB PTO AB207 8 PTO AK PTO AB PTO AB207 8 PTO AK PTO AB PTO AB206 8 PTO AK PTO AB PTO AB207 8 PTO AK PTO AB PTO AB207 8 QTY REQ. FLANGE YOKES FOR FRICTION CLUTCHES Item #8 in diagram SERIES DESCRIPTION PTO AB20084 AB4/AW2 8 holes PTO AB20085 AB5 8 holes PTO AB20086 AB6/AW22 8 holes

115 8-08 PTO PARTS AND COMPONENTS SAFETY CONES Replace that bent metal shield for complete safety! L D D MACHINE SIZE (MM) PTO AS PTO AS PTO AS PTO AS380L COMPLETE DRIVE LINES Units are complete with 3 /8" - 6 spline tractor QD yoke but do not include implement yoke. Shielding is included. Units are Waltersheld (lemon tube) style of profiles. 540 RPM FOR IMPLEMENT YOKES SEE PAGE # PTO AW PTO AB *This unit is 28" overall length collapsed and is complete with 3/8-6 spline yoke on both ends. Unit is well suited for fertilizer spreader. SPIRAL PINS Bulk - sold in quantities of 0 See Section 4 for pricing. A x B HAR 2788 /8" x " HAR /6" x " HAR /6" x 2" HAR 279 /4" x " HAR 2792 /4" x /2" HAR 2793 /4" x 2" HAR /6" x /2" HAR /6" x 2" A x B HAR /6" x 2 3 /4" HAR /8" x /2" HAR /8" x 2" HAR /8" x 3" HAR /6" x /2" HAR /6" x 2" HAR /6" x 3" HAR 2803 /2" x 2" HAR 2804 /2" x 3" Package contains: 0 of /8" x " 0 of 3 /6" x 2" 0 of /4" x /2" 9 of 5 /6" x /2" 5 of 5 /6" x 2 3 /4" 5 of 3 /8" x 2" 5 of 7 /6" x /2" 5 of 7 /6" x 3" 4 of /2" x 3" HAR of 3 /6" x " 0 of /4" x " 0 of /4" x 2" 6 of 5 /6" x 2" 7 of 3 /8" x /2" 5 of 3 /8" x 3" 5 of 7 /6" x 2" 4 of /4" x 2" 80 C.V. ROUND BALER DRIVELINES Driveline Tractor Shaft Half Assembly C.V. Female Tractor Half Produced for John Deere Round Balers. SERIES TRACTOR YOKE SHAFT HALF FITS SERIES TRACTOR YOKE TUBE HALF PTO R 3 /8" x 6 Spline /6" x 2 Spline Gehl, John Deere, Case, Vermeer, Hesston and others PTO PTO R 35R 3 /8" x 6 Spline 3 /8" x 2 Spline 2 /2" O.D. 2 /2" O.D.

116 PTO PARTS AND COMPONENTS CONSTANT VELOCITY DRIVELINE CONSTANT VELOCITY With innovative and patented features exclusive to Weasler for North American-style Drivelines. Features ARTICULATED GUARD SYSTEM CV center housing accommodates a bell that fits within minimum ASAE tractor master shield. Bell is articulated to allow a full 80. The plastic guard over the CV joint is supported by a bearing that rides on the center housing. TELESCOPING DRIVELINE The Weasler CV driveline utilizes shafts that telescope into a hardened sleeve with a large grease reservoir. Reduced friction means low thrust, for minimal wear throughout CV life. Tested in contaminated environments. LONG LIFE Compact, heavy duty center housing has a large capacity grease cavity and unique lubrication system. Patented grease system insures positive one shot lubrication of hardened and ground centering balls and sockets. Unique center slider support plates greatly increases life by retaining lubrication and sealing out contaminants. Full surface contact means reduced wear on all components, minimizing vibration. HIGH TORSIONAL STRENGTH The exclusive ball and socket of the Weasler CV is integral with the yoke. Trunnions on the center plate are supported directly in the yoke by the ball and socket, providing strength for heavy-duty applications. Forged yokes and center housing are engineered for high torque. Benefits Applications Constant Velocity Drivelines allow turns at high angles under full power without damaging the driveline or other components. When using conventional drivelines, the vibrations increase as the angle increases. A CV driveline will substantially reduce vibrations due to its operating at a constant speed. The reduction in vibration will result in fewer breakdowns and lower cost of implement maintenance. Listed are some applications of 80 CV drivelines that Weasler currently produces for Original Equipment Manufacturers. Round Balers Square Balers Orchard Sprayers Flexwing Mowers Manure Pumps Beet Toppers Rock Pickers Stalk Choppers Box-type Manure Spreaders Tank-type Manure Spreaders Mower Conditioners Peanut Harvesters

117 8-0 PTO PARTS AND COMPONENTS 80 CONSTANT VELOCITY DRIVELINE CONSTANT VELOCITY A = Overall Length B = Centerline Length Constant Velocity Driveline Replacement Chart ASAE CATEGORY WEASLER SERIES REPLACEMENT FOR 3 4 Bondioli & Pavesi 4 Series Walterscheid 2380 Series 4 35 Bondioli & Pavesi 5 Series 5 35/ Bondioli & Pavesi 6 Series Walterscheid 2480 Series Bondioli & Pavesi 8 Series Walterscheid 2580 Series & 2680 Series The above chart lists the approximate size replacement for Constant Velocity Drivelines. These are not an exact interchange, and should be used as a general replacement guide only. NOTE: 35/44 refers to CV Series. When CV is assembled with 44 Series tube end driveline becomes a 44 Series. When CV is assembled with a 35 Series tube end driveline is a 35 Series. Instructions for Ordering a CV Driveline To determine the series of a Weasler driveline, reference the dimension of the Cross & Bearing as illustrated on page 5. To determine the series as a replacement for a competitive driveline, reference the above chart. Determine the overall length of the driveline in a closed position (DIM "A") in the illustration. Next, select the part number which closely corresponds with the appropriate series and length. Some drivelines are furnished without Cross & Bearing Kit and Implement Yoke. For implement yoke selection, refer to the appropriate Weasler Aftermarket Driveline Component section. GUARDS MUST ROTATE FREELY ON YOKES.

118 PTO PARTS AND COMPONENTS NORTH AMERICAN SECTION 80 CV CATEGORY 3/4 SERIES 8- NORTH AMERICAN CONSTANT VELOCITY Tractor Yoke Safety Slide Lock Repair Kit - Page 49 PTO PTO PTO 0742 Spring-Lok Repair Kit - Page 49 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Center Housing PTO Yoke & Shaft PTO PTO /8" x 6 Spl. 3 /8" x 2 Spl. Auto-Lok Repair Kit - Page 49 SHAFT SIZE DIM "A" SHAFT PTO " x /8" Rect. 27 /4" PTO 406 PTO 420 PTO 42 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Yoke, Tube & Sleeve Assembly Cross & Bearing Kit (R-Kit) DIM "A" DIM "B" DIM "C" DIM "D" PTO /8" 2 5 /8" 4 /4" /8" Extended Lubrication Cross & Bearing Kit (E-Kit) DIM "A" BORE DIM "B" BORE OVERALL DRIVELINE DIM "C" CL TO END OF SLEEVE PTO 0448 " x /8" Rect. N/A 48" 3.62" PTO 0458 " x /8" Rect. N/A 58" 4.62" PTO 0467 " x /8" Rect. N/A 67" 50.62" DIM "A" DIM "B" DIM "C" DIM "D" PTO /8" 2 5 /8" 4 /4" /8" Yoke, Tube & Sleeve Assembly w/guard Shaft " x /8" Rectangular PTO ' PTO ' PTO ' DIM "A" BORE DIM "B" BORE OVERALL DRIVELINE DIM "C" CL TO END OF SLEEVE PTO " x /8" Rect. N/A 48" 3.62" PTO " x /8" Rect. N/A 58" 4.62" PTO " x /8" Rect. N/A 67" 50.62"

119 8-2 PTO PARTS AND COMPONENTS 80 CV CATEGORY 3/4 SERIES NORTH AMERICAN CONSTANT VELOCITY Joint & Shaft Joint & Shaft w/guard SHAFT SIZE SHAFT TRACTOR YOKE PTO " x /8" Rect. 27 /4" 3 /8" x 6 Spl. PTO " x /8" Rect. 27 /4" 3 /8" x 2 Spl. SHAFT SIZE SHAFT TRACTOR YOKE PTO " x /8" Rect. 27 /4" 3 /8" x 6 Spl. PTO " x /8" Rect. 27 /4" 3 /8" x 2 Spl. Guard Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page 0) 2) Guards must rotate freely on yokes. OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO " PTO PTO " PTO PTO " PTO Easy Lock Replacement Kit PTO (4 per kit) Drivelines SHAFT SIZE DIM "A" OVERALL COMPRESSED MAXIMUM OVERALL EXTENDED OPERATING TRACTOR YOKE PTO " x /8" 48" 67" 3 /8" x 6 Spl. PTO " x /8" 48" 67" 3 /8" x 2 Spl. PTO " x /8" 58" 77" 3 /8" x 6 Spl. PTO " x /8" 58" 77" 3 /8" x 2 Spl. PTO " x /8" 67" 86" 3 /8" x 6 Spl. PTO " x /8" 67" 86" 3 /8" x 2 Spl. (Order implement yoke and cross & bearing kit separately as required.)

120 PTO PARTS AND COMPONENTS CV CATEGORY 4/35 SERIES NORTH AMERICAN CONSTANT VELOCITY Tractor Yoke Yoke, Tube & Sleeve Assembly Safety Slide Lock Repair Kit - Page 49 PTO PTO PTO /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. DIM "A" BORE OVERALL DRIVELINE DIM "C" CL* TO END OF SLEEVE PTO /6" x 20 Spl. 48" 29.25" Auto-Lok Repair Kit - Page 49 PTO PTO /8" x 6 Spl. 3 /4" x 20 Spl. PTO /6" x 20 Spl. 58" 39.38" PTO /6" x 20 Spl. 67" 48.25" *CL=Centerline Yoke, Tube & Sleeve Assembly w/guard PTO /8" x 2 Spl. Cross & Bearing Kit (R-Kit) DIM "A" DIM "B" DIM "C" DIM "D" PTO /8" 3 7 /32" 4 /4" /4" Extended Lubrication Cross & Bearing Kit (E-Kit) DIM "A" DIM "B" DIM "C" DIM "D" PTO /8" 3 7 /32" 4 /4" /4" DIM "A" BORE DIM "B" BORE OVERALL DRIVELINE DIM "C" CL* TO END OF SLEEVE PTO N/A 5 /6" x 20 Spl. 48" 29.25" PTO N/A 5 /6" x 20 Spl. 58" 39.37" PTO N/A 5 /6" x 20 Spl. 67" 48.25" PTO N/A 5 /6" x 20 Spl. 73" 54.37" PTO N/A 5 /6" x 20 Spl. 79" 58.25" *CL=Centerline Joint & Shaft Shaft 5 /6" x 20 Spline Induction Hardened PTO ' Center Housing SHAFT SIZE SHAFT TRACTOR YOKE PTO /6" x 20 Spl. 27" 3 /8" x 6 Spl. PTO /6" x 20 Spl. 27" 3 /8" x 2 Spl. PTO /6" x 20 Spl. 27" 3 /4" x 20 Spl. PTO Joint & Shaft w/guard Yoke & Shaft SHAFT SIZE SHAFT TRACTOR YOKE PTO /6" x 20 Spl. 27" 3 /8" x 6 Spl. SHAFT SIZE DIM "A" SHAFT PTO /6" x 20 Spl. 27" PTO /6" x 20 Spl. 27" 3 /8" x 2 Spl. PTO /6" x 20 Spl. 27" 3 /4" x 20 Spl.

121 8-4 PTO PARTS AND COMPONENTS 80 CV CATEGORY 4/35 SERIES NORTH AMERICAN CONSTANT VELOCITY Guard OVERALL DRIVELINE BEARING SET PTO " PTO PTO " PTO PTO " PTO Assembly instructions included with guard. NOTE: When installing Guards observe the following: ) Install proper nylon bearing (See page 0). 2) Guards must rotate freely on yokes. Easy Lock Replacement Kit PTO (4 per kit) Drivelines SHAFT SIZE DIM "A" OVERALL COMPRESSED EXTENDED OPERATING TRACTOR YOKE PTO * 5 /6" x 20 Spl. 48" 67" 3 /8" x 6 Spl. PTO * 5 /6" x 20 Spl. 48" 67" 3 /8" x 2 Spl. PTO * 5 /6" x 20 Spl. 48" 67" 3 /4" x 20 Spl. PTO * 5 /6" x 20 Spl. 58" 77" 3 /8" x 6 Spl. PTO * 5 /6" x 20 Spl. 58" 77" 3 /8" x 2 Spl. PTO * 5 /6" x 20 Spl. 58" 77" 3 /4" x 20 Spl. PTO * 5 /6" x 20 Spl. 67" 84" 3 /8" x 6 Spl. PTO * 5 /6" x 20 Spl. 67" 84" 3 /8" x 2 Spl. PTO * 5 /6" x 20 Spl. 67" 84" 3 /4" x 20 Spl. PTO * 5 /6" x 20 Spl. 73" 92" 3 /8" x 6 Spl. PTO * 5 /6" x 20 Spl. 73" 92" 3 /8" x 2 Spl. PTO * 5 /6" x 20 Spl. 73" 92" 3 /4" x 20 Spl. *(Order implement yoke and cross & bearing kit separately as required.)

122 PTO PARTS AND COMPONENTS CV CATEGORY 5/35/44 SERIES NORTH AMERICAN CONSTANT VELOCITY Tractor Yoke Safety Slide Lock Repair Kit - Page 49 PTO PTO PTO 3506 PTO 3520 PTO /8" x 6 Spl. 3 /4" x 20 Spl. PTO /8" x 2 Spl. Auto-Lok Repair Kit - Page 49 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) DIM "A" DIM "B" DIM "C" DIM "D" PTO /4" 3 7 /32" 4 5 /6" /4" Yoke, Tube & Sleeve Assembly DIM "A" BORE OVERALL DRIVELINE DIM "B" CL* TO END OF SLEEVE PTO /6" x 20 Spl. 48" 29.25" PTO /6" x 20 Spl. 58" 39.38" PTO /6" x 20 Spl. 67" 48.25" PTO /6" x 20 Spl. 73" 54.38" PTO /6" x 20 Spl. 79" 58.25" PTO /6" x 20 Spl. 48" 29.88" PTO /6" x 20 Spl. 58" 38.88" PTO /6" x 20 Spl. 67" 47.88" PTO /6" x 20 Spl. 73" 53.88" PTO /6" x 20 Spl. 79" 59.88" *CL=Centerline Yoke, Tube & Sleeve Assembly w/guard Extended Lubrication Cross & Bearing Kit (E-Kit) DIM "A" DIM "B" DIM "C" DIM "D" PTO /4" 3 7 /32" 4 5 /6" /4" Shaft /6" x 20 Spline Induction Hardened PTO ' Center Housing PTO Yoke & Shaft DIM "A" BORE DIM "B" BORE OVERALL DRIVELINE DIM "C" CL* TO END OF SLEEVE PTO N/A /6" x 20 Spl. 48" 29.25" PTO N/A /6" x 20 Spl. 58" 39.37" PTO N/A /6" x 20 Spl. 67" 48.25" PTO N/A /6" x 20 Spl. 73" 54.37" PTO N/A /6" x 20 Spl. 79" 58.25" PTO N/A /6" x 20 Spl. 48" 28.87" PTO N/A /6" x 20 Spl. 58" 38.87" PTO N/A /6" x 20 Spl. 67" 47.87" PTO N/A /6" x 20 Spl. 73" 53.87" PTO N/A /6" x 20 Spl. 79" 59.87" *CL=Centerline Joint & Shaft SHAFT SIZE DIM "A" SHAFT PTO /6" x 20 Spl. 27" SHAFT SIZE SHAFT TRACTOR YOKE PTO /6" x 20 Spl. 27" 3 /8" x 6 Spl. PTO /6" x 20 Spl. 27" 3 /8" x 2 Spl. PTO /6" x 20 Spl. 27" 3 /4" x 20 Spl.

123 8-6 PTO PARTS AND COMPONENTS 80 CV CATEGORY 5/35/44 SERIES NORTH AMERICAN CONSTANT VELOCITY Joint & Shaft w/guard Guard Easy Lock Replacement Kit SHAFT SIZE PTO (4 per kit) SHAFT TRACTOR YOKE PTO /6" x 20 Spl. 27 /4" 3 /8" x 6 Spl. PTO /6" x 20 Spl. 27 /4" 3 /8" x 2 Spl. PTO /6" x 20 Spl. 27 /4" 3 /4" x 20 Spl. OVERALL DRIVELINE BEARING SET (2 PER KIT) PTO " PTO PTO " PTO PTO " PTO PTO " PTO PTO " PTO Assembly instructions included with guard. NOTE: When installing Guards observe the following: ) Install proper nylon bearing (See page 0). 2) Guards must rotate freely on yokes. Drivelines SHAFT SIZE DIM "A" OVERALL COMPRESSED MAX. OVERALL EXTENDED OPERATING TRACTOR YOKE IMPLEMENT YOKE PTO /6" x 20 Spl. 58" 79" 3 /8" x 6 Spl. 3 /8" x 6 Spl. w/friction Clutch PTO /6" x 20 Spl. 67" 88" 3 /8" x 6 Spl. 3 /8" x 2 Spl. w/friction Clutch PTO /6" x 20 Spl. 58" 79" 3 /8" x 2 Spl. 3 /8" x 6 Spl. w/friction Clutch PTO /6" x 20 Spl. 58" 79" 3 /8" x 20 Spl. 3 /8" x 6 Spl. w/friction Clutch PTO /6" x 20 Spl. 48" 67" 3 /8" x 6 Spl. N/A* PTO /6" x 20 Spl. 48" 67" 3 /8" x 2 Spl. N/A* PTO /6" x 20 Spl. 48" 67" 3 /4" x 20 Spl. N/A* PTO /6" x 20 Spl. 58" 77" 3 /8" x 6 Spl. N/A* PTO /6" x 20 Spl. 58" 77" 3 /8" x 2 Spl. N/A* PTO /6" x 20 Spl. 58" 77" 3 /4" x 20 Spl. N/A* PTO /6" x 20 Spl. 67" 84" 3 /8" x 6 Spl. N/A* PTO /6" x 20 Spl. 67" 84" 3 /8" x 2 Spl. N/A* PTO /6" x 20 Spl. 67" 84" 3 /4" x 20 Spl. N/A* PTO /6" x 20 Spl. 73" 92" 3 /8" x 6 Spl. N/A* PTO /6" x 20 Spl. 73" 92" 3 /8" x 2 Spl. N/A* PTO /6" x 20 Spl. 73" 92" 3 /4" x 20 Spl. N/A* PTO /6" x 20 Spl. 79" 96" 3 /8" x 6 Spl. N/A* PTO /6" x 20 Spl. 79" 96" 3 /8" x 2 Spl. N/A* PTO /6" x 20 Spl. 79" 96" 3 /4" x 20 Spl. N/A* PTO /6" x 20 Spl. 48" 67" 3 /8" x 6 Spl. N/A* PTO /6" x 20 Spl. 48" 67" 3 /8" x 2 Spl. N/A* PTO /6" x 20 Spl. 48" 67" 3 /4" x 20 Spl. N/A* PTO /6" x 20 Spl. 58" 77" 3 /8" x 6 Spl. N/A* PTO /6" x 20 Spl. 58" 77" 3 /8" x 2 Spl. N/A* PTO /6" x 20 Spl. 58" 77" 3 /4" x 20 Spl. N/A* PTO /6" x 20 Spl. 67" 84" 3 /8" x 6 Spl. N/A* PTO /6" x 20 Spl. 67" 84" 3 /8" x 2 Spl. N/A* PTO /6" x 20 Spl. 67" 84" 3 /4" x 20 Spl. N/A* PTO /6" x 20 Spl. 73" 92" 3 /8" x 6 Spl. N/A* PTO /6" x 20 Spl. 73" 92" 3 /8" x 2 Spl. N/A* PTO /6" x 20 Spl. 73" 92" 3 /4" x 20 Spl. N/A* PTO /6" x 20 Spl. 79" 96" 3 /8" x 6 Spl. N/A* PTO /6" x 20 Spl. 79" 96" 3 /8" x 2 Spl. N/A* PTO /6" x 20 Spl. 79" 96" 3 /4" x 20 Spl. N/A* *(Order implement yoke and cross & bearing kit separately as required.)

124 PTO PARTS AND COMPONENTS CV CATEGORY 6/55 SERIES NORTH AMERICAN CONSTANT VELOCITY Tractor Yoke Safety Slide Lock Repair Kit - Page 49 PTO PTO PTO 5506 PTO 5520 PTO /8" x 6 Spl. 3 /4" x 20 Spl. PTO /8" x 2 Spl. Auto-Lok Repair Kit - Page 49 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) Yoke, Tube & Sleeve Assembly DIM "A" BORE OVERALL DRIVELINE DIM "C" CL* TO END OF SLEEVE PTO /6" x 20 Spl. 48" 28.88" PTO /6" x 20 Spl. 58" 38.88" PTO /6" x 20 Spl. 67" 47.88" PTO /6" x 20 Spl. 73" 53.88" PTO /6" x 20 Spl. 79" 59.88" *CL=Centerline Yoke, Tube & Sleeve Assembly w/guard DIM "A" DIM "B" DIM "C" DIM "D" PTO /6" 3 23 /32" 4 5 /6" 7 /32" Extended Lubrication Cross & Bearing Kit (E-Kit) DIM "A" DIM "B" DIM "C" DIM "D" PTO /6" 3 23 /32" 4 5 /6" 7 /32" Shaft /6" x 20 Spline Induction Hardened PTO ' Center Housing DIM "A" BORE DIM "B" BORE PTO N/A /6" x 20 Spl. PTO N/A /6" x 20 Spl. PTO N/A /6" x 20 Spl. PTO N/A /6" x 20 Spl. PTO N/A /6" x 20 Spl. PTO N/A /6" x 20 Spl. PTO N/A /6" x 20 Spl. PTO N/A /6" x 20 Spl. *CL=Centerline OVERALL DRIVELINE DIM "C" CL* TO END OF SLEEVE IMPLEMENT YOKE 48" 29.25" - 58" 39.37" - 67" 48.25" - 73" 54.37" - 79" 58.25" - 5" 28.87" 55" 38.87" 55" 47.87" 3 /4" x 20 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. PTO Joint & Shaft w/guard Yoke & Shaft SHAFT SIZE DIM "A" SHAFT PTO /6" x 20 Spl. 27" SHAFT SIZE SHAFT TRACTOR YOKE PTO /6" x 20 Spl. 27 /4" 3 /8" x 6 Spl. PTO /6" x 20 Spl. 27 /4" 3 /8" x 2 Spl. PTO /6" x 20 Spl. 27 /4" 3 /4" x 20 Spl. PTO /6" x 20 Spl. 27 /4" 3 /8" x 6 Spl. PTO /6" x 20 Spl. 27 /4" 3 /8" x 2 Spl. PTO /6" x 20 Spl. 27 /4" 3 /4" x 20 Spl.

125 8-8 PTO PARTS AND COMPONENTS 80 CV CATEGORY 6/55 SERIES NORTH AMERICAN CONSTANT VELOCITY Joint & Shaft Guard Easy Lock Replacement Kit SHAFT SIZE PTO (4 per kit) SHAFT TRACTOR YOKE PTO /6" x 20 Spl. 27" 3 /8" x 6 Spl. PTO /6" x 20 Spl. 27" 3 /8" x 2 Spl. PTO /6" x 20 Spl. 27" 3 /4" x 20 Spl. OVERALL DRIVELINE BEARING SET (2 PER KIT) PTO " PTO PTO " PTO PTO " PTO PTO " PTO PTO " PTO Assembly instructions included with guard. NOTE: When installing Guards observe the following: ) Install proper nylon bearing (See page 0). 2) Guards must rotate freely on yokes. Drivelines SHAFT SIZE DIM "A" OVERALL COMPRESSED EXTENDED OPERATING TRACTOR YOKE IMPLEMENT YOKE PTO /6" x 20 Spl. 48" 67" 3 /8" x 6 Spl. * PTO /6" x 20 Spl. 5" 68" 3 /8" x 6 Spl. 3 /4" x 20 Spl. w/clamp PTO /6" x 20 Spl. 55" 77" 3 /8" x 6 Spl. 3 /8" x 6 Spl. w/clamp PTO /6" x 20 Spl. 58" 80" 3 /8" x 6 Spl. * PTO /6" x 20 Spl. 67" 84" 3 /8" x 6 Spl. * PTO /6" x 20 Spl. 73" 92" 3 /8" x 6 Spl. * PTO /6" x 20 Spl. 79" 96" 3 /8" x 6 Spl. * PTO /6" x 20 Spl. 55" 77" 3 /8" x 6 Spl. 3 /4" x 20 Spl. w/clamp PTO /6" x 20 Spl. 48" 67" 3 /8" x 2 Spl. * PTO /6" x 20 Spl. 5" 68" 3 /8" x 2 Spl. 3 /4" x 20 Spl. w/clamp PTO /6" x 20 Spl. 55" 77" 3 /8" x 2 Spl. 3 /8" x 6 Spl. w/clamp PTO /6" x 20 Spl. 58" 80" 3 /8" x 2 Spl. * PTO /6" x 20 Spl. 67" 84" 3 /8" x 2 Spl. * PTO /6" x 20 Spl. 73" 92" 3 /8" x 2 Spl. * PTO /6" x 20 Spl. 79" 96" 3 /8" x 2 Spl. * PTO /6" x 20 Spl. 55" 77" 3 /8" x 2 Spl. 3 /4" x 20 Spl. w/clamp PTO /6" x 20 Spl. 55" 77" 3 /8" x 2 Spl. 3 /8" x 2 Spl. w/clamp PTO /6" x 20 Spl. 55" 77" 3 /8" x 2 Spl. 3 /8" x 2 Spl. w/pinhole PTO /6" x 20 Spl. 48" 67" 3 /4" x 20 Spl. * PTO /6" x 20 Spl. 5" 68" 3 /4" x 20 Spl. 3 /4" x 20 Spl. w/clamp PTO /6" x 20 Spl. 55" 77" 3 /4" x 20 Spl. 3 /8" x 6 Spl. w/clamp PTO /6" x 20 Spl. 58" 80" 3 /4" x 20 Spl. * PTO /6" x 20 Spl. 67" 84" 3 /4" x 20 Spl. * PTO /6" x 20 Spl. 73" 92" 3 /4" x 20 Spl. * PTO /6" x 20 Spl. 79" 96" 3 /4" x 20 Spl. * PTO /6" x 20 Spl. 55" 77" 3 /4" x 20 Spl. 3 /4" x 20 Spl. w/clamp PTO /6" x 20 Spl. 55" 77" 3 /4" x 20 Spl. 3 /8" x 2 Spl. w/clamp PTO /6" x 20 Spl. 55" 77" 3 /4" x 20 Spl. 3 /8" x 2 Spl. w/pinhole *(Order implement yoke and cross & bearing kit separately as required.)

126 PTO PARTS AND COMPONENTS CV DRIVELINE COMPONENTS NORTH AMERICAN CONSTANT VELOCITY Tractor Yoke Repair Kit - Page 49 Clamp Yoke With Keyway SERIES PTO /8" x 6 Spl. PTO /8" x 2 Spl. PTO /8" x 6 Spl. PTO /8" x 2 Spl. Shaft Weld Yoke (Guard must rotate freely on the yoke.) SERIES PTO /4" PTO /4" PTO /2" Stock Bore SERIES PTO " Rd. Center Housing SERIES PTO PTO Tube Yoke (Guard must rotate freely on the yoke.) SERIES PTO /8" SERIES PTO " PTO " Guard PTO (Guard must rotate freely on yokes.) NOTE: *Outer Guard is larger in order to shield CV half of hte driveline. *50 CV joint and shaft half most commonly connects to the implement... ie. grain auger. Also, ball shear connects to the tractor PTO, which is the tube half. Yoke & Shaft Implement Yoke Round Bore With Keyway & Pinhole SERIES PTO (w/ /4" keyway & 2 set screws) /4" PTO (w/ /4" keyway & 3 /8" pinhole) /4" PTO (w/ 5 /6" keyway & /4" pinhole) 3 /8" PTO (w/ 5 /6" keyway & /4" pinhole) 3 /8" SERIES SHAFT SIZE DIM "A" PTO " x /8" Rect " Yoke & Tube SERIES SHAFT SIZE DIM "A" PTO /4" x 3 /8" Rect. 34"

127 8-20 PTO PARTS AND COMPONENTS 50 CV DRIVELINE COMPONENTS NORTH AMERICAN CONSTANT VELOCITY Joint & Shaft Half with Guard With Keyway, (2) Set Screws & Pinhole Ball Shear Device With Spring-Lok SERIES DIM "B" PTO /4" Rd " SHEAR BOLT PTO /8" x 6 Spl. () 5 /6" - 8 Gr. 5 Constant Velocity Joint SHEAR BOLT PTO /8" x 6 Spl. (2) 3 /8" - 6 Gr. 5 SERIES DIM "B" BORE PTO /4" Rd. * " PTO /4" Rd. ** " *(with /4" keyway & 2 set screws) **(with keyway and pinhole) Applications of 50 CV Grain Augers Compost Turners Front-Mount Riding Mowers Mower Conditioners Potato Harvesters Tub Grinders

128 2380 SERIES Interchanges with Walterscheid (AW2) Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke PTO PARTS AND COMPONENTS METRIC SECTION DIM "A" DIM "B" DIM "C" DIM "D" mm inches mm inches mm inches mm inches PTO /6 (2.93) /64 (3.58) /6 (.93) 27.0 /6 (.06) 8-2 METRIC CONSTANT VELOCITY Cross & Bearing Kit (E-Kit) DIM "A" DIM "B" DIM "C" DIM "D" mm inches mm inches mm inches mm inches PTO /6 (2.93) /64 (3.58) 23.8 /6 (.93) 27.0 /6 (.06) Tractor Yoke Safety Slide Lock Repair Kit - Page 06 Ring Groove PTO PTO /8" x 6 Spl. 3 /8" x 2 Spl. Inner Tube 34.5 (4.0 Wall).358 (.58 Wall)" Rilsan Coating mm inches PTO /8 (39.37) Roll Pin Quick Disconnect Repair Kit - Page 06 PTO /8" x 6 Spl. DIM "A" DIM "B" mm inches mm inches PTO /64 (.393) /6 (2.56) Center Housing Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke.) PTO Outer Tube 4.0 (3.0 Wall) Special mm inches PTO /64 (.36) mm inches PTO /8 (39.37)

129 8-22 PTO PARTS AND COMPONENTS 2380 SERIES METRIC CONSTANT VELOCITY Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke.) 80 C.V. Joint mm inches PTO DIM "B" BORE PTO /8" x 6 Spl mm (.358") Guard Order bearings as required. OVERALL DRIVELINE BEARING SET (2 PER KIT) PTO " PTO Assembly instructions included with guard. NOTE: When installing Guards observe the following: ) Install proper nylon bearing (See page ). 2) Guards must rotate freely on yokes. Easy Lock Replacement Kit PTO (4 per kit)

130 PTO PARTS AND COMPONENTS SERIES Interchanges with Walterscheid (AW35) METRIC CONSTANT VELOCITY Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" DIM "C" DIM "D" mm inches mm inches mm inches mm inches PTO /64 (2.99) /64 (3.70) 27 /6 (.06) /64 (.26) Cross & Bearing Kit (E-Kit) DIM "A" DIM "B" DIM "C" DIM "D" mm inches mm inches mm inches mm inches PTO /64 (2.99) /64 (3.70) 27 /6 (.06) /64 (.26) Tractor Yoke Inner Tube Safety Slide Lock Repair Kit - Page (4.8 Wall) Rilsan Coating PTO PTO PTO /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. DIM "A" mm inches mm inches PTO /6 (.56) /8 (39.37) Quick Disconnect Repair Kit - Page 06 Roll Pin PTO PTO PTO /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. DIM "A" DIM "B" mm inches mm inches PTO /32 (.406) /32 (3.56) Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke.) Center Housing mm inches PTO /6 (.56) PTO

131 8-24 PTO PARTS AND COMPONENTS 2480 SERIES METRIC CONSTANT VELOCITY Outer Tube 80 C.V. Joint 48.0 (4.0 Wall) 4.0 Wall (Special) mm inches PTO /8 (39.37) DIM "B" BORE PTO /8" x 6 Spl mm (.562") Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke.) mm inches PTO /8 (.890) Easy Lock Replacement Kit PTO (4 per kit) Guard OVERALL DRIVELINE BEARING SET (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. NOTE: When installing Guards observe the following: ) Install proper nylon bearing (See page ). 2) Guards must rotate freely on yokes. Drivelines TRACTOR YOKE IMPLEMENT YOKE OVERALL DRIVELINE PTO /8" x 6 Spl. 3 /8" x 6 Spl. 48" PTO /8" x 6 Spl. 3 /8" x 6 Spl. 60" PTO /8" x 2 Spl. 3 /8" x 6 Spl. 48" PTO /8" x 2 Spl. 3 /8" x 6 Spl. 60" PTO /8" x 6 Spl. 3 /8" x 6 Spl. 60" PTO /8" x 2 Spl. 3 /8" x 6 Spl. 60" PTO /4" x 20 Spl. 3 /8" x 6 Spl. 60" (Order implement yoke and cross & bearing kit separately as required.)

132 PTO PARTS AND COMPONENTS SERIES Interchanges with Walterscheid (AW36) METRIC CONSTANT VELOCITY Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" DIM "C" DIM "D" mm inches mm inches mm inches mm inches PTO Cross & Bearing Kit (E-Kit) DIM "A" DIM "B" DIM "C" DIM "D" mm inches mm inches mm inches mm inches PTO Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO PTO PTO With Bearing Groove (Guard must rotate freely on yoke.) 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Inner Profile Yoke Outer Tube 6.0 x 4.0 (Special) Center Housing PTO mm inches PTO /6 (59.0) PTO /6 (59.0) mm inches PTO Inner Tube Rilsan Coating DIM "A" mm inches mm inches PTO /8 (39.37) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke.) mm inches PTO /8 (2.402) 80 C.V. Joint Roll Pin DIM "B" BORE DIM "A" DIM "B" mm inches mm inches PTO /32 (.406) /2 (3.54) PTO /8" x 6 Spl. 5.0 mm (2.000") PTO /8" x 2 Spl. 5.0 mm (2.000") PTO /4" x 20 Spl. 5.0 mm (2.000")

133 8-26 PTO PARTS AND COMPONENTS 2580 SERIES METRIC CONSTANT VELOCITY Yoke, Tube & Sleeve Assembly with Guard Guard FITS PROFILE TUBE IMPLEMENT YOKE PTO (Star) 3 /4" x 20 Spl. w/clamp PTO (Star) 3 /8" x 6 Spl. w/clamp PTO (Star) 3 /4" x 20 Spl. w/clamp PTO (Star) 3 /8" x 2 Spl. w/clamp PTO (Star) 3 /8" x 2 Spl. w/pinhole Joint & Shaft with Guard OVERALL DRIVELINE BEARING SET (2 PER KIT) PTO " PTO PTO " PTO Assembly instructions included with guard. NOTE: When installing Guards observe the following: ) Install proper nylon bearing (See page ). 2) Guards must rotate freely on yokes. Easy Lock Replacement Kit FITS PROFILE TUBE IMPLEMENT YOKE PTO (Star) 3 /8" x 6 Spl. PTO (Star) 3 /4" x 20 Spl. PTO (Star) 3 /8" x 6 Spl. PTO (Star) 3 /8" x 6 Spl. PTO (Star) 3 /8" x 2 Spl. PTO (4 per kit) Drivelines TRACTOR YOKE IMPLEMENT YOKE OVERALL DRIVELINE PTO /8" x 6 Spl. 3 /8" x 6 Spl. 48" PTO /8" x 6 Spl. 3 /4" x 20 Spl.w/Clamp 5" PTO /8" x 6 Spl. 3 /8" x 6 Spl. w/clamp 55" PTO /8" x 6 Spl. 3 /8" x 6 Spl. 60" PTO /8" x 6 Spl. 3 /4" x 20 Spl.w/Clamp 55" PTO /8" x 2 Spl. 3 /8" x 6 Spl. 48" PTO /8" x 2 Spl. 3 /4" x 20 Spl.w/Clamp 5" PTO /8" x 2 Spl. 3 /8" x 6 Spl. w/clamp 55" PTO /8" x 2 Spl. 3 /8" x 2 Spl. 60" PTO /8" x 2 Spl. 3 /4" x 20 Spl.w/Clamp 55" PTO /8" x 2 Spl. 3 /8" x 2 Spl.w/Clamp 55" PTO /8" x 2 Spl. 3 /8" x 2 Spl.w/Pinhole 55" PTO /4" x 20 Spl. 3 /4" x 20 Spl.w/Clamp 5" PTO /4" x 20 Spl. 3 /4" x 6 Spl.w/Clamp 55" PTO /4" x 20 Spl. 3 /4" x 20 Spl.w/Clamp 55" PTO /4" x 20 Spl. 3 /8" x 2 Spl.w/Clamp 55" PTO /4" x 20 Spl. 3 /4" x 2 Spl.w/Pinhole 55" (Order implement yoke and cross & bearing kit separately as required.)

134 PTO PARTS AND COMPONENTS APPLICATIONS NORTH AMERICAN REPLACEMENT DRIVELINES CONSTANT VELOCITY 8-27 Flexwing Mower Replacement Drivelines SERIES CATEGORY TRACTOR YOKE CLAMP-STYLE IMPLEMENT YOKE OVERALL COMPRESSED DRIVELINE PTO /8" x 6 Spl. 3 /4" x 20 Spl. 5" PTO /8" x 2 Spl. 3 /4" x 20 Spl. 5" PTO /4" x 20 Spl. 3 /4" x 20 Spl. 5" PTO /8" x 6 Spl. 3 /8" x 6 Spl. 55" PTO /8" x 2 Spl. 3 /8" x 6 Spl. 55" PTO /4" x 20 Spl. 3 /8" x 6 Spl. 55" PTO /8" x 6 Spl. 3 /4" x 20 Spl. 55" PTO /8" x 2 Spl. 3 /4" x 20 Spl. 55" PTO /4" x 20 Spl. 3 /4" x 20 Spl. 55" Round Baler Drivelines SERIES CATEGORY TRACTOR YOKE IMPLEMENT YOKE PTO /8" x 6 Spl. PTO /8" x 2 Spl. PTO /8" x 6 Spl. PTO /8" x 6 Spl. 3 /8" x 6 Spl. with 8,000 in-lb. Friction Clutch 3 /8" x 6 Spl. with 0,000 in-lb. Friction Clutch 3 /8" x 2 Spl. with 5,000 in-lb. Friction Clutch 3 /8" x 6 Spl. with 5,000 in-lb. Friction Clutch OVERALL COMPRESSED DRIVELINE 58" 58" 67" 58" Peanut Harvester Replacement Drivelines SERIES CATEGORY TRACTOR YOKE CLAMP-STYLE IMPLEMENT YOKE OVERALL COMPRESSED DRIVELINE PTO /8" x 2 Spl. 3 /8" x 2 Spl. 55" PTO /4" x 20 Spl. 3 /8" x 2 Spl. 55" PTO /8" x 2 Spl. 3 /8" x 2 Spl. 55" PTO /4" x 20 Spl. 3 /8" x 2 Spl. 55"

135 8-28 PTO PARTS AND COMPONENTS METRIC REPLACEMENT DRIVELINES CONSTANT VELOCITY Flexwing Mower Replacement Drivelines SERIES TRACTOR YOKE CLAMP-STYLE IMPLEMENT YOKE OVERALL COMPRESSED DRIVELINE PTO /8" x 6 Spl. 3 /4" x 20 Spl. 5" PTO /8" x 2 Spl. 3 /4" x 20 Spl. 5" PTO /4" x 20 Spl. 3 /4" x 20 Spl. 5" PTO /8" x 6 Spl. 3 /8" x 6 Spl. 55" PTO /8" x 2 Spl. 3 /8" x 6 Spl. 55" PTO /4" x 20 Spl. 3 /8" x 6 Spl. 55" PTO /8" x 6 Spl. 3 /4" x 20 Spl. 55" PTO /8" x 2 Spl. 3 /4" x 20 Spl. 55" PTO /4" x 20 Spl. 3 /4" x 20 Spl. 55" Peanut Harvesters SERIES TRACTOR YOKE CLAMP-STYLE IMPLEMENT YOKE OVERALL COMPRESSED DRIVELINE PTO /8" x 2 Spl. 3 /8" x 2 Spl. 55" PTO /4" x 20 Spl. 3 /8" x 2 Spl. 55" PTO /8" x 2 Spl. 3 /8" x 2 Spl. 55" PTO /4" x 20 Spl. 3 /8" x 2 Spl. 55"

136 PTO PARTS AND COMPONENTS CV'S FOR FLEX-WING CUTTERS - DOMESTIC & METRIC CONSTANT VELOCITY Interchanges with BUSH HOG - Model #: 265, 365 Also fits other competitive models. DOMESTIC METRIC CV OVERALL TRACTOR YOKE IMPLEMENT COMPRESSED CLAMP YOKE PTO /8" x 6 Spline 55" 3 /8" x 6 Spline 55 PTO /8" x 2 Spline 55" 3 /8" x 6 Spline 55 PTO /4" x 20 Spline 55" 3 /8" x 6 Spline 55 SERIES PTO /8" x 6 Spline 55" 3 /8" x 6 Spline BP 8/WS 2580 PTO /8" x 2 Spline 55" 3 /8" x 6 Spline BP 8/WS 2580 PTO /4" x 20 Spline 55" 3 /8" x 6 Spline BP 8/WS 2580 Interchanges with RHINO - Model #: SR-5, SE-5 DOMESTIC METRIC CV OVERALL TRACTOR YOKE IMPLEMENT COMPRESSED CLAMP YOKE PTO /8" x 6 Spline 5" 3 /4" x 20 Spline 55 PTO /8" x 2 Spline 5" 3 /4" x 20 Spline 55 PTO /4" x 20 Spline 5" 3 /4" x 20 Spline 55 SERIES PTO /8" x 6 Spline 5" 3 /4" x 20 Spline BP 8/WS 2580 PTO /8" x 2 Spline 5" 3 /4" x 20 Spline BP 8/WS 2580 PTO /4" x 20 Spline 5" 3 /4" x 20 Spline BP 8/WS 2580 Interchanges with DEERE - Model #: 57, 58, 208 Also fits other competitive models. DOMESTIC METRIC CV OVERALL TRACTOR YOKE IMPLEMENT COMPRESSED CLAMP YOKE PTO /8" x 6 Spline 55" 3 /4" x 20 Spline 55 PTO /8" x 2 Spline 55" 3 /4" x 20 Spline 55 PTO /4" x 20 Spline 55" 3 /4" x 20 Spline 55 SERIES PTO /8" x 6 Spline 55" 3 /4" x 20 Spline BP 8/WS 2580 PTO /8" x 2 Spline 55" 3 /4" x 20 Spline BP 8/WS 2580 PTO /4" x 20 Spline 55" 3 /4" x 20 Spline BP 8/WS 2580

137 8-29 A PTO PARTS AND COMPONENTS WING DRIVE FRICTION CLUTCH The Wing Drive Friction Clutch is indispensable in certain agricultural implement applications. The friction clutch is the only torque limiter to continuously transmit power while overloaded. This is valuable during start up of high inertia machines, as well as for leveling out torsional fluctuations due to high cyclic loads. During overload the clutch limits transmitted power. The patented design dissipates heat quickly, improving durability while protecting the machine. Performance Benefits Implement overload protection. Dissipates heat minimizing downtime for higher productivity. Corrosion resistant friction discs. Optimized design affords more reliable torque setting. Minimal maintenance. Smooth operation, no damaging torque spikes. Torque transmission while slipping aids in dislodging plugs for increased productivity REPLACEMENT WING DRIVE SHAFTS Machine Specific Shafts for: Shulte, Woods, John Deere, Bush Hog, Rhino/M&W, Kodiak, Land Pride, Bush-Whacker MACHINE SPECIFIC SHAFTS INTERCHANGES WITH BONDIOLI & PAVESI SERIES DESCRIPTION TORQUE RATING COMP. OAL APPLICATION PTO ByPy 6 PTO ByPy 6 PTO ByPy 6 PTO ByPy 6 3/4" x 20 Clamp x 3/4" x 20 Clamp Fric. Cl. 3/4" x 20 Clamp x 3/4" x 20 Clamp Fric. Cl. 3/8" x 2 Clamp x 3/8" x 2 Clamp Fric. Cl. 3/4" x 20 Clamp x 3/8" x 6 Clamp Fric. Cl. 5,000 in lbs. 56." 5,000 in lbs 64." 5,000 in lbs 64." M&W-A45; AGI 5 ft. Flexwing; Rhino - FR5, SR5 5 ft. Rotary Cutter; Landpride - RC555, RC655 5 ft. Mower; Woods - BW80 Flexwing Schulte - XH500 Flexwing; Bush Hog - 255, 2720 Flexwing; Deere - HX5; Kodiak - Ol' Grizz 5 ft Schulte - FX26; Deere - 58, 208 5,000 in lbs 64." Bush-Whacker -T-80 For inner profile tube replacement for all of the above order PTO mm (5.4 Wall) mm REPLACEMENT FRICTION CLUTCH USED ON DRIVELINE PTO PTO PTO PTO FRICTION CLUTCH REPLACEMENT PARTS PTO Spring PTO Disc High Performance Friction Clutch specially developed for demanding field conditions for wing drives on flex wing and multiple disc mowers.

138 PTO PARTS AND COMPONENTS 8-29 B REPLACEMENT WING DRIVE SHAFTS Check outboard yokes for correct hook up. Verify overall compressed length. Utilizes standard open spring friction clutch. ALL PURPOSE SHAFTS INTERCHANGES WITH BONDIOLI & PAVESI SERIES DESCRIPTION TORQUE RATING COMP. OAL APPLICATION PTO ByPy 6 PTO ByPy 6 PTO ByPy 6 3/8" x 6 Q.D. x 3/4" x 20 Clamp Fric. Cl. 3/4" x 20 Q.D. x 3/4" x 20 Clamp Fric. Cl. 3/8" x 6 Q.D. x 3/8" x 2 Clamp Fric. Cl. NOTE: Replacement shafts may differ from original equipment shafts. 5,000 in lbs = 700 Nm & 3,200 in lb = 500 Nm 3,200 in lbs 6.5" Bush Hog - Various Models 3,200 in lbs 63.8" Bush Hog - Various Models 3,200 in lbs 6.5" Bush Hog - Various Models REPLACEMENT SPRING FRICTION CLUTCH USED ON DRIVELINE PTO PTO PTO REPLACEMENT PART AVAILABILITY: PTO Disc REPLACEMENT WING DRIVE SHAFTS Machine Specific Shafts for: Shulte, Woods, John Deere, Bush Hog, Rhino/M&W, Kodiak, Land Pride, Bush-Whacker ALL PURPOSE SHAFTS INTERCHANGES WITH BONDIOLI & PAVESI SERIES DESCRIPTION TORQUE RATING COMP. OAL APPLICATION PTO PTO PTO PTO REPLACEMENT FRICTION CLUTCH USED ON DRIVELINE PTO PTO PTO PTO FRICTION CLUTCH REPLACEMENT PARTS PTO PTO Spring Disc 3/4" x 20 Clamp x 3/4" x 20 Clamp Fric. Cl. 3/4" x 20 Clamp x 3/4" x 20 Clamp Fric. Cl. 3/8" x 2 Clamp x 3/8" x 2 Clamp Fric. Cl. 3/4" x 20 Clamp x 3/8" x 6 Clamp Fric. Cl. 5,000 in lbs. 56." 5,000 in lbs 64." 5,000 in lbs 64." M&W -A45, AGI 5 ft. Flexwing; Rhino - FR5, SR5 5 ft. Rotary Cutter; Landpride RC555, RC655 5 ft. Mower; Woods -BW80 Flexwing Schulte - XH500 Flexwing; Bush Hog - 255, 2726 Flexwing; Deere - HX5; Kodiak - Ol' Grizz 5 ft Schulte - FX26; Deere - 58, 208 5,000 in lbs. 64." Bush-Whacker - T-80 NOTE: Replacement shafts may differ from original equipment shafts. 5,000 in lbs = 700 Nm & 3,200 in lb = 500 Nm High Performance Friction Clutch specially developed for demanding field conditions for wing drives on flex wing and multiple disc mowers.

139 8-30 PTO PARTS AND COMPONENTS 80 CV ROUND BALER DRIVELINES CONSTANT VELOCITY Gehl Deluxe - Model # 2880 PTO CV D/L - 3 /8 x 6 Tractor Yoke PTO " Clutch Pak PTO /8 x 2 Clutch Yoke PTO Series Cross Kit COMPLETE D/L PTO Deere - Model # 467 & 466 PTO CV D/L - 3 /8 x 6 Tractor Yoke PTO " Clutch Pak PTO /8 x 6 Clutch Yoke PTO Series Cross Kit COMPLETE D/L PTO Deere - Model # 567 & 566 (000 RPM) PTO CV D/L - 3 /8 x 2Tractor Yoke PTO " Clutch Pak PTO COMPLETE D/L /8 x 6 Clutch Yoke PTO Series Cross Kit PTO PARTS FOR TORQMASTER CLUTCH SPRING 7" CLUTCH 9" CLUTCH PTO PTO PTO PTO SEPARATOR PLATE PTO PTO PTO " CLUTCH 9" CLUTCH PTO PTO DISC 7" CLUTCH 9" CLUTCH PTO PTO Case - Model # 8455S & 8455T - (540 RPM) PTO CV D/L - 3 /8 x 6 Tractor Yoke PTO " Clutch Pak PTO /8 x 6 Clutch Yoke PTO Series Cross Kit COMPLETE D/L PTO Vermeer - Model # 604K - (540 RPM) PTO CV D/L - 3 /8 x 6 Tractor Yoke PTO " Clutch Pak PTO /8 x 6 Clutch Yoke PTO Series Cross Kit COMPLETE D/L PTO Hesston - Model # 555S & 555T - (540 RPM) PTO CV D/L - 3 /8 x 6 Tractor Yoke PTO " Clutch Pak PTO /8 x 6 Clutch Yoke PTO Series Cross Kit COMPLETE D/L PTO (000 RPM) PTO CV D/L - 3 /8 x 2 Tractor Yoke PTO " Clutch Pak PTO /8 x 6 Clutch Yoke PTO Series Cross Kit COMPLETE D/L (000 RPM) (000 RPM) PTO PTO CV D/L - 3 /8 x 2 Tractor Yoke PTO " Clutch Pak PTO /8 x 6 Clutch Yoke PTO Series Cross Kit COMPLETE D/L PTO PTO CV D/L - 3 /8 x 2 Tractor Yoke PTO " Clutch Pak PTO /8 x 6 Clutch Yoke PTO Series Cross Kit COMPLETE D/L PTO

140 PTO PARTS AND COMPONENTS 8-3 DEALER STARTER KITS North American Starter Kit North American & Metric Starter Kit PTO PTO Contains of each of the following: PTO PTO PTO PTO PTO PTO DESCRIPTION Domestic 5" Clutch Pak (6,000 in. lbs.) Domestic 7" Clutch Pak (9,000 in. lbs.) Domestic 7" Clutch Pak (2,000 in. lbs.) Domestic 35 Series 3 /8" x 6 Spl. Clamp Yoke Domestic 4 Series /8" x 6 Spl. Clamp Yoke Domestic 35 Series 3 /8" Round with keyway & 2 setscrews TORQMASTER Promotional Poster Contains of each of the following: PTO PTO PTO PTO PTO PTO PTO DESCRIPTION Domestic 5" Clutch Pak (6,000 in. lbs.) Domestic 7" Clutch Pak (9,000 in. lbs.) Domestic 7" Clutch Pak (2,000 in. lbs.) Domestic 35 Series 3 /8" x 6 Spl. Clamp Yoke Domestic 4 Series /8" x 6 Spl. Clamp Yoke Domestic 35 Series 3 /8" Round with keyway & 2 setscrews Metric ByPy 4 Series/Walterscheid 2300 Series 3 /8" x 6 Spline Clamp Yoke PTO Metric ByPy 5 Series 3 /8" Round with keyway & 2 setscrews TORQMASTER Promotional Poster

141 8-32 PTO PARTS AND COMPONENTS 80 CONSTANT VELOCITY DRIVELINE with innovative and patented features exclusive to Weasler... Features ARTICULATED GUARD SYSTEM cv centre housing accommodates a bell that fits within minimum ASAE tractor master sheild. Bell is articulated to allow a full 80. The plastic guard over the CV joint is supported by a bearing that rides on the centre housing. The steel guard incorporates a field proven bearing system that significantly reduces wear and increases the life of guard components. TELESCOPING DRIVELINE The Weasler CV driveline utilizes shafts that telescope into a hardened sleeve with a large grease reservoir. Reduced friction means low thrust, for minimal wear throughout CV life. Tested in contaminated environments. LONG LIFE Compact, heavy duty centre housing has a large capacity grease cavity and unique lubrication system. Patented grease system ensures positive one shot lubrication of hardened and ground centering balls and sockets. Unique centre slider support plates greatly increase life by retaining lubrication and sealing out contaminants. Full surface contact means reduced wear on all components, minimizing vibration. HIGH TORSIONAL STRENGTH The exclusive ball and socket of the Weasler CV is integral with the yoke. Trunnions on the centre plate are supported directly in the yoke by the ball and socket, providing strength for heavy-duty applications. Forged yokes and centre housing are engineered for high torque. Benefits Constant Velocity Drivelines allow turns at high angles under full power without damaging the driveline or other components. When using conventional drivelines, the vibrations increase as the angle increases. A CV driveline will substantially reduce vibrations due to its operating at a constant speed. The reduction in vibration will result in fewer breakdowns and lower cost of implement maintenance. Applications Listed are some applications of CV drivelines: Round Balers Square Balers Orchard Sprayers Batwing Mowers Manure Pumps Beet Toppers Rock Pickers Stalk Choppers Box-type Manure Spreaders Tank-type Manure Spreaders Mower Conditioners

142 PTO PARTS AND COMPONENTS 8-33 TORQMASTER CLUTCHES CLUTCHES NORTH AMERICAN Weasler 4, 35, 44, 55 Interchanges with: Neapco 2600 Series and Walterscheid 480 Series METRIC Interchanges with: Bondioli and Pavesi 4, 5, 6 and 8 Series and Walterscheid 2300, 2400 and 2500 Series (For use on implement end of driveline only) The drawing illustrates the components of the TORQMASTER. Each component of the exploded view is identified by an eight-digit stock number to ensure identification. Number Identification Examples: Torque in lbs Diameter of Clutch Pak Spline 4 Series Auto-Lok for Overrunning Clutch Implement Yoke Spline 35 Series Clamp Yoke for Friction Clutch Implement Yoke Spline ByPy 4 Series and W/S 2300 Series Interchanges with both ByPy and W/S Clamp Yoke for Overrunning Clutch Implement Yoke */6th increments. 3 /8" Round Bore* 44 Series Round Bore for Friction Clutch Implement Yoke Diameter of Clutch Pak Friction Disc Diameter of Clutch Pak Separator Plate NOTE: Overrunning Clutch Paks must be mated with Overrunning Yokes.

143 8-34 PTO PARTS AND COMPONENTS TORQMASTER - FEATURES AND BENEFITS CLUTCHES Superior performance. Long life. Isolates/dissipates heat. "User Friendly" - easy to service. Free motion - ease of hook-up. Minimum adjustment required. Auto-Lok available. Replacement clutch for most farm implements.* Torque setting from 9,000 in lbs to 2,000 in lbs. Overrunning feature also available. Modular construction covers a wide variety of applications. Applications for the TorQmaster Modular Clutch: Spreaders Mixers Mower Conditioners Rotary Cutters Flail Shredders Grain Carts Balers Snowblowers For use on implement end of driveline only. INSTRUCTIONS FOR ORDERING THE CLUTCH Determine the driveline series using Transparency Identification System for either North American or Metric applications (See Pages 9 and 53). Identify the connecting shaft size and the method of attachment (ex: clamp, bolt, keyway). Obtain torque setting from owner/operator manual - if available. If torque setting is not available, use the following Clutch Pak Selection Guide (Pages 36 and 37) as a guideline for selecting the proper clutch pak. Order clutch yoke and clutch pak separately by stock number. For installation, attach lutch yoke to the driveline first, then mount the clutch pak to the clutch yoke. Use the modular clutch on the implement end of the driveline only. If the implement input connection guard is removed for service, re-install the guard before using the machine. Some implements (ex: mower conditioner, flail shredder) require an overrunning feature incorporated into the clutch. If the replacement clutch requires this feature, order the appropriate overrunning modular clutch and overrunning clutch yoke.

144 PTO PARTS AND COMPONENTS 8-35 ASSEMBLY INSTRUCTIONS CLUTCHES FOR MODULAR CLUTCH RUN-IN OF THE TORQMASTER MODULAR CLUTCH (Instructions) If the clutch has not been operated for () season we recommend the following: TOOLS REQUIRED: () /2" box wrench or socket.. Make sure the tractor is off and the PTO is disengaged. 2. Disconnect the driveline from the tractor. 3. Locate the bolts on the O.D. of the clutch pak. Loosen the bolts until all are finger tight, then tighten each one half a turn. 4. Attach the implement to the tractor at the hitch pin, and the driveline to the tractor PTO. 5. Turn the tractor on. Engage the PTO clutch and run for a few seconds, or until the clutch visibly smokes. 6. Disengage the tractor PTO and shut off the tractor. Keep clear of the machine until all parts stop moving. 7. Disconnect the driveline from the tractor. 8. Tighten the bolts on the O.D. of the clutch pak until the compression plate is in full contact with the housing. 9. If the clutch contains an integral overrunning clutch, make sure the clutch spins freely in one direction.

145 8-36 PTO PARTS AND COMPONENTS TORQMASTER CLUTCH PAK SELECTION GUIDE CLUTCHES Spreader Mower Conditioner FRICTION CLUTCH OVERRUNNING CLUTCH 540 RPM IN LB TORQUE CAPACITY: Less than 240 Bushels or 50 cu.ft. 000 RPM IN LB TORQUE PTO PTO CAPACITY: Between Bushels or cu.ft. PTO PTO PTO PTO CAPACITY: Between Bushels or cu.ft. PTO PTO PTO PTO CAPACITY: Greater than 560 Bushels or 350 cu.ft. PTO PTO PTO PTO Mixer FRICTION CLUTCH OVERRUNNING CLUTCH 540 RPM IN LB TORQUE CAPACITY: Less than 240 Bushels or 50 cu.ft. 000 RPM IN LB TORQUE PTO PTO CAPACITY: Between Bushels or cu.ft. PTO PTO PTO PTO CAPACITY: Between Bushels or cu.ft. PTO PTO PTO PTO CAPACITY: Greater than 560 Bushels or 350 cu.ft. PTO PTO PTO PTO Snowblowers FRICTION CLUTCH 540 RPM IN LB TORQUE WIDTH OF CUT: Less than 60" 000 RPM IN LB TORQUE PTO PTO WIDTH OF CUT: 6" - 70" PTO PTO WIDTH OF CUT: 7" - 80" PTO PTO WIDTH OF CUT: 8" - 90" PTO N/A 8000 WIDTH OF CUT: Greater than 90" PTO N/A 8000 FRICTION CLUTCH OVERRUNNING CLUTCH 540 RPM IN LB TORQUE SICKLE BAR: Less than 0 feet 000 RPM IN LB TORQUE PTO PTO SICKLE BAR: 0-3 feet PTO PTO PTO PTO SICKLE BAR: 4-7 feet PTO PTO PTO PTO FRICTION CLUTCH OVERRUNNING CLUTCH 540 RPM IN LB TORQUE ROTARY DISC: Less than 0 feet 000 RPM IN LB TORQUE PTO PTO ROTARY DISC: - 3 feet PTO PTO ROTARY DISC: 4-7 feet PTO PTO Rotary Cutter Clutch/Machine FRICTION CLUTCH OVERRUNNING CLUTCH 540 RPM IN LB TORQUE DECK WIDTH: 4-7 feet 000 RPM IN LB TORQUE PTO PTO PTO PTO DECK WIDTH: 8-3 feet PTO PTO PTO PTO DECK WIDTH: 4-6 feet PTO PTO PTO PTO DECK WIDTH: 7-20 feet PTO PTO PTO PTO DECK WIDTH: Larger than 20 feet PTO PTO SECTION WIDTH: 4-6 feet PTO PTO PTO PTO SECTION WIDTH: Greater than 6 feet PTO PTO PTO PTO

146 PTO PARTS AND COMPONENTS 8-37 TORQMASTER CLUTCH PAK SELECTION GUIDE CLUTCHES Flail Shredder FRICTION CLUTCH OVERRUNNING CLUTCH Less than 0 feet 540 RPM IN LB TORQUE 000 RPM IN LB TORQUE PTO PTO PTO PTO feet PTO PTO PTO PTO Greater than 5 feet PTO Round Baler *If you have an implement that does NOT appear in the above Clutch Pak Selection Guide, use the following chart as a general guideline for selecting the proper Clutch Pak. NORTH AMERICAN 4 Series 35 Series 44 Series 55 Series METRIC Bondioli & Pavesi 4 Series Walterscheid 2300 Series Bondioli & Pavesi 5 Series Walterscheid 2400 Series Bondioli & Pavesi 6 & 7 Series Walterscheid II Series Bondioli & Pavesi 8 Series Walterscheid 2500 & 2600 Series PTO PTO PTO PTO *See Page 34 for Clutch Pak ordering information. FRICTION CLUTCH OVERRUNNING CLUTCH 540 RPM IN LB TORQUE BALE WEIGHT: Less than 600 lbs. 000 RPM IN LB TORQUE PTO PTO BALE WEIGHT: lbs. PTO PTO PTO PTO BALE WEIGHT lbs. PTO PTO PTO PTO Clutch Pak Product Information Adjustment detail - 7" and 9" Clutch Paks No spring adjustment required. Tighten bolts to 30 ft-lbs (max). Grain Cart FRICTION CLUTCH OVERRUNNING CLUTCH 540 RPM IN LB TORQUE 000 RPM IN LB TORQUE PTO PTO Up to 750 Bushels PTO PTO Above 750 Bushels PTO PTO You will find some overlap within an implement category in the Clutch Pak Selection Guide. The operator will generally know if he has a heavy duty or light duty application. If in doubt, always protect the driveline...refer to the "general guideline for selecting proper clutch pak" on this page.

147 8-38 PTO PARTS AND COMPONENTS NORTH AMERICAN SECTION CLUTCH COMPONENTS CLUTCHES TorQmaster Clutch Paks 7" & 9" 4 Series (Cont'd) Round Bore Yoke CLUTCH PAK OVERRUNNING CLUTCH in lbs DIM "A" PTO PTO " PTO PTO " PTO PTO " PTO PTO " PTO PTO " PTO PTO " PTO PTO " PTO PTO " NOTE: Torqmaster clutch paks must be used with mating Torqmaster yoke that has same flange configuration only. 4 Series Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE PTO PTO /8" x 6 Spl. PTO 8742 PTO /8" x 2 Spl. ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/ KEYWAY & SETSCREW PTO PTO /4" Rd. PTO PTO /8" Rd. 35 Series Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE DIM "B" BORE W/ KEYWAY PTO PTO /8" x 6 Spl. - PTO PTO /8" x 2 Spl. - PTO PTO /2" Rd. Clamp Yoke Clamp Yoke CLAMP YOKE Auto-Lok Yoke OVERRUNNING CLAMP YOKE PTO PTO /4" x 20 Spl. CLAMP YOKE OVERRUNNING CLAMP YOKE PTO PTO /4" x 20 Spl. Auto-Lok Yoke AUTO-LOK YOKE OVERRUNNING AUTO- LOK YOKE PTO PTO /8" x 6 Spl. PTO PTO /4" x 20 Spl. PTO PTO /8" x 2 Spl. AUTO-LOK YOKE OVERRUNNING AUTO- LOK YOKE PTO PTO /8" x 6 Spl. PTO PTO /4" x 20 Spl. PTO PTO /8" x 2 Spl.

148 PTO PARTS AND COMPONENTS 8-39 CLUTCH COMPONENTS CLUTCHES 4 Series (Cont'd) Round Bore Yoke 55 Series Clamp Yoke ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/ KEYWAY & SETSCREW DIM "B" BORE W/ 3 /8" PINHOLE PTO PTO /4" Rd. Dbl. KW - PTO PTO /8" Rd. - PTO PTO /2" Rd. - PTO PTO /4" Rd. 44 Series Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE DIM "A" BORE PTO PTO /8" x 6 Spl. PTO PTO /8" x 2 Spl. Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE DIM "A" DIM "B" W/KEYWAY PTO PTO /8" x 6 Spl. - PTO PTO /8" x 2 Spl. - PTO PTO /2" Rd. CLAMP YOKE OVERRUNNING CLAMP YOKE PTO PTO /4" x 20 Spl. PTO PTO /4" x 27 Spl. Auto-Lok Yoke Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE PTO PTO /4" x 20 Spl. Auto-Lok Yoke AUTO-LOK YOKE OVERRUNNING AUTO- LOK YOKE PTO PTO /8" x 6 Spl. PTO PTO /4" x 20 Spl. PTO PTO /8" x 2 Spl. Round Bore Yoke AUTO-LOK YOKE OVERRUNNING AUTO- LOK YOKE PTO PTO /8" x 6 Spl. PTO PTO /4" x 20 Spl. PTO PTO /8" x 2 Spl. Round Bore Yoke ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/ KEYWAY & SETSCREW DIM "B" BORE W/ 3 /8" PINHOLE PTO PTO /8" Rd. - PTO PTO /4" Rd. - PTO N/A - 2" Rd. ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/ KEYWAY & SETSCREW DIM "B" BORE W/ 3 /8" PINHOLE PTO PTO /4" Rd. - PTO PTO /8" Rd. - PTO N/A - 2" Rd.

149 8-40 PTO PARTS AND COMPONENTS METRIC SECTION CLUTCH COMPONENTS CLUTCHES TorQmaster Clutch Paks 7" & 9" Interchanges with: Bondioli & Pavesi 2 Series, Walterscheid 2200 Series Ratchet Clutch CLUTCH PAK OVERRUNNING CLUTCH in lbs DIM "A" PTO PTO " PTO PTO " PTO PTO " PTO PTO " PTO PTO " PTO PTO " PTO PTO " PTO PTO " NOTE: Torqmaster clutch paks must be used with mating Torqmaster yoke that has same flange configuration only. Interchanges with: Walterscheid 480 Series Neapco 2600 Series Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE PTO PTO /8" x 6 Spl. PTO PTO /8" x 2 Spl. TYPE W/KEYWAY & CLUTCH SETTING SET SCREW PTO Spring Lock 2600 in-lbs. 3 /8" x 6 Spl. Interchanges with: Bondioli & Pavesi 3 Series, Walterscheid I Series Ratchet Clutch TYPE CLUTCH SETTING W/KEY- WAY & SET SCREW PTO Spring Lock 5300 in-lbs. 3 /8" x 6 Spl. Interchanges with: Bondioli & Pavesi 4 Series, Walterscheid 2300 Series Clamp Yoke Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE PTO PTO /4" x 20 Spl. Interchanges with: Walterscheid 480 Series Neapco 2600 Series Round Bore Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE W/KEYWAY & SET SCREW PTO PTO /8" x 6 Spl. PTO PTO /4" x 20 Spl. PTO PTO /8" x 2 Spl. Interchanges with: Bondioli & Pavesi 4 Series, Walterscheid 2300 Series Auto-Lok Yoke ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/ KEYWAY & SET SCREW PTO PTO /8" Rd. AUTO-LOK YOKE OVERRUNNING AUTO- LOK YOKE PTO N/A 3 /8" x 6 Spl.

150 PTO PARTS AND COMPONENTS 8-4 CLUTCH COMPONENTS CLUTCHES Interchanges with: Bondioli & Pavesi 4 Series, Walterscheid 2300 Series Interchanges with: Bondioli & Pavesi 5 Series Round Bore Yoke Clamp Yoke ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/ KEYWAY & SET SCREW PTO PTO /8" Rd. Interchanges with: Bondioli & Pavesi 4 Series, Walterscheid 2300 Series Friction Clutch CLAMP YOKE OVERRUNNING CLAMP YOKE PTO PTO /8" x 6 Spl. PTO * PTO /4" x 20 Spl. PTO PTO /8" x 2 Spl. *For correct picture please refer to Walterscheid 480 Series PTO Interchanges with: Bondioli & Pavesi 5 Series Round Bore Yoke TYPE CLUTCH SETTING PTO Dbl. Clamp 8000 in-lbs. 3 /8" x 6 Spl. Interchanges with: Bondioli & Pavesi 4 Series, Walterscheid 2300 Series Ratchet Clutch ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/ KEYWAY & SET SCREW PTO PTO /8" Rd. PTO PTO /2" Rd. Interchanges with: Bondioli & Pavesi 5 Series Friction Clutch TYPE CLUTCH SETTING PTO Spring Lock 8000 in-lbs. 3 /8" x 6 Spl. TYPE CLUTCH SETTING PTO Dbl. Clamp 8000 in-lbs. 3 /8" x 6 Spl. Interchanges with: Bondioli & Pavesi 4 Series, Walterscheid 2300 Series Interchanges with: Bondioli & Pavesi 5 Series Overrunning Clutch (Free-Wheel Clockwise) Ratchet Clutch (3 & 4 Row) TYPE CLUTCH SETTING PTO Spring Lock N/A 3 /8" x 6 Spl. TYPE CLUTCH SETTING PTO Spring Lock 8000 in-lbs. 3 /8" x 6 Spl.

151 8-42 PTO PARTS AND COMPONENTS CLUTCH COMPONENTS CLUTCHES Interchanges with: Bondioli & Pavesi 6 Series, Walterscheid 220 Series Interchanges with: Bondioli & Pavesi 6 Series, Walterscheid 220 Series Clamp Yoke Overrunning Clutch (Free-Wheel Clockwise) CLAMP YOKE OVERRUNNING CLAMP YOKE DIM "B" BORE W/KEYWAY & SET SCREW PTO PTO /8" x 6 Spl. - PTO * PTO /4" x 20 Spl. - PTO PTO /8" x 2 Spl. - PTO PTO /2" Rd. PTO PTO /4" x 6 Spl. - *For correct picture please refer to Walterscheid 2400 Series PTO Interchanges with: Bondioli & Pavesi 6 Series, Walterscheid 220 Series Round Bore Yoke TYPE CLUTCH SETTING PTO Spring Lock N/A 3 /8" x 6 Spl. Interchanges with: Bondioli & Pavesi 8 Series Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE W/KEYWAY & SET SCREW PTO PTO /8" x 6 Spl. PTO PTO /8" x 2 Spl. Interchanges with: Bondioli & Pavesi 8 Series Clamp Yoke ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/ KEYWAY & SET SCREW PTO PTO /8" Rd. PTO PTO /2" Rd. CLAMP YOKE OVERRUNNING CLAMP YOKE PTO PTO /4" x 20 Spl. PTO PTO /4" x 6 Spl. Interchanges with: Bondioli & Pavesi 6 Series, Walterscheid 220 Series Interchanges with: Bondioli & Pavesi 8 Series Friction Clutch Round Bore Yoke TYPE CLUTCH SETTING PTO Dbl. Clamp,25 in-lbs. 3 /8" x 6 Spl. ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/KEYWAY & SET SCREW PTO PTO /8" Rd.

152 PTO PARTS AND COMPONENTS 8-43 CLUTCH COMPONENTS CLUTCHES Interchanges with: Walterscheid 2400 Series Interchanges with: Walterscheid 2500 Series Round Bore Yoke Clamp Yoke ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/KEYWAY & SET SCREW PTO PTO /8" Rd. PTO PTO /4" Rd. Interchanges with: Walterscheid 2400 Series Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE PTO PTO /8" x 6 Spl. PTO PTO /8" x 2 Spl. Interchanges with: Walterscheid 2500 Series Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE PTO PTO /8" x 6 Spl. PTO PTO /8" x 2 Spl. CLAMP YOKE OVERRUNNING CLAMP YOKE PTO PTO /4" x 20 Spl. Interchanges with: Walterscheid 2400 Series Clamp Yoke Interchanges with: Walterscheid 2500 Series Round Bore Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE PTO PTO /4" x 20 Spl. Interchanges with: Walterscheid 2400 Series ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/KEYWAY & SET SCREW DIM "B" BORE WITH 3 /8" PINHOLE PTO PTO /8" Rd. - PTO PTO /4" Rd. - PTO N/A - 2" Rd. Overrunning Clutch (Free-Wheel Clockwise) TYPE CLUTCH SETTING PTO Spring Lock N/A 3 /8" x 6 Spl.

153 8-44 PTO PARTS AND COMPONENTS CLUTCH COMPONENTS CLUTCHES Universal Friction Clutch Separator Plate 7" and 9" DIM "A" CLUTCH SETTING DIM "B" BORE PTO /8" x 6 Spl in-lbs. 3 /8" x 6 Spl. PTO /4" Rd in-lbs. 3 /8" x 6 Spl. PTO /8" Rd in-lbs. 3 /8" Rd. PTO /8" x 6 Spl in-lbs. 3 /8" x 6 Spl. PTO /8" Rd in-lbs. 3 /8" x 6 Spl. Friction Disc SEPARATOR PLATE OVERRUNNING SEPARATOR PLATE DIM "A" OD DIM "B" OD PTO " - - PTO " PTO " - - PTO " PTO /8" Rd in-lbs. Overrunning Clutch Repair Kit 7" and 9" 3 /8" x 6 Spl. DIM "A" O.D. PTO " PTO " PTO " PTO " PTO " PTO " PTO DIM "A" O.D. () Overrunning Collar (2) Dogs (2) Leaf Springs () Wave Spring () Washer () Retaining Ring () Assembly/Disassembly Instructions Spring 7" and 9" DIM "A" O.D. DIM "B" THICKNESS PTO ".38" PTO ".58" PTO ".69" PTO ".89" PTO ".58" PTO ".69" PTO ".89" PTO ".89"

154 PTO PARTS AND COMPONENTS 8-45 SHEARBOLT CLUTCHES Economical protection of equipment drivelines & gearboxes. Retrofit to existing drivelines. 3 /8" 6 spline female. To Fit Walterscheid AGDRIVE SERIES L R BOLT SIZE TORQUE WILL ADAPT TO AW20 PTO AK mm 42 mm M6 6,800 lbs. Walterscheid 2200 Series AW2 PTO AK mm 48 mm M7 0,600 lbs. Walterscheid 2300 Series AW35 PTO AK mm 48 mm M7 0,600 lbs. Walterscheid 2400 Series AW35 PTO AK mm 56 mm M8 6,200 lbs. Walterscheid 2400 Series AW23 PTO AK mm 56 mm M0 25,500 lbs. AW24 PTO AK mm 56 mm M0 25,500 lbs. AW36 PTO AK mm 56 mm M0 25,500 lbs. To Fit Bondioli & Pavesi AGDRIVE SERIES L R BOLT SIZE TORQUE WILL ADAPT TO AB2 PTO AK mm 42 mm M6 6,800 lbs. Bondioli & Pavesi Series AB4 PTO AK mm 48 mm M7 0,600 lbs. Bondioli & Pavesi Series 4 AB5 PTO mm 56 mm M0 25,500 lbs. Bondioli & Pavesi Series 5 AB7N PTO AK mm 56 mm M0 25,500 lbs. Bondioli & Pavesi Series 7 AB8 PTO AK mm 56 mm M0 25,500 lbs. Bondioli & Pavesi Series 8 FREEWHEEL (OVERRUNNING) CLUTCHES Allows equipment to coast to a stop reducing shock loads on belts, chains, bearings & drivelines. Lengthens gearbox life & reduces strain on tractor PTO shaft & braking system. Works especially well on equipment utilizing flywheels for centrifugal drive maintenance. 3 /8" x 6 spline female quick detach standard on both units. Standard SHAFT SERIES L HP WILL ADAPT TO AB4 PTO mm 28 Bondioli & Pavesi Series 4 AW2 PTO mm 28 Walterscheid Series 2300 AW22 PTO AK mm 65 AB6 PTO AK mm 65 Bondioli & Pavesi Series 6 AB5 PTO AK mm 35 Bondioli & Pavesi Series 5 Standard

155 8-46 PTO PARTS AND COMPONENTS FRICTION CLUTCHES Provide low maintenance protection for drivelines & gearboxes. Protection to roto tiller rotors & post hole digger augers etc. Two sizes of friction discs fit all models. 8 bolt configuration prevents disc warping & lengthens friction disc life. 3 /8" x 6 spline female coupling is standard. Standard Clamp Bolt Connection STANDARD CLAMP BOLT CONNECTION SHAFT SERIES L TORQUE HP WILL ADAPT TO AW23/AB7 PTO AK ,000 lbs. AW35 PTO AK ,000 lbs. 53 Walterscheid Series 2400 AB7N PTO AK7N ,600 lbs. 75 Bondioli & Pavesi Series 7 AB5 PTO AK ,920 lbs. 47 Bondioli & Pavesi Series 5 Universal Standard QR Connection SHAFT SERIES L TORQUE HP WILL ADAPT TO AB4 PTO AK20Q ,920 lbs. 35 Bondioli & Pavesi Series 4 MAK-A-KEY STEP KEY STOCK Cold finished. Oversize keystock ground down to A, B-D & C dimensions per tolerances listed below. Use for couplings, gears, sheaves, sprockets, pulleys - anything that keys to a shaft. Available in 2' lengths. Material 08. TYPE DIMENSIONS A B C D WEIGHT lbs./bar HAR /6" 3 /32" /8" /6".088 HAR /6" 3 /32" /4" /8".66 HAR /4" /8" 5 /6" /8".24 HAR /4" /8" 3 /8" 3 /6".347 HAR /8" 3 /6" 5 /6" 5 /32".406 HAR /8" 3 /6" /2" /4".680 HAR /2" /4" 5 /8" 5 /6".090 See section 4 for pricing. TYPE Tolerances A & C dimensions -.000/+.002 B/D dimensions -.003/+.003 B & D dimensions -.004/+.004 TYPE 2 Tolerances C & A dimensions -.000/+.002 B/D dimensions -.005/+.005 B & D dimensions -.005/+.005

156 PTO PARTS AND COMPONENTS 8-47 WIDE ANGLE (CV) JOINTS Convert existing equipment to smooth running CV joints. Replace worn CV's with complete balanced units. Not recommended for,000 rpm applications. ⅜" 6 spline female. AGDRIVE SERIES L L TUBE WILL ADAPT TO AG2N PTO AG AP43 Walterscheld 2300 Outer Profile Tube AG35 PTO AG AP484 Walterscheld 2400 Outer Profile Tube Parts for Wide Angle CV Joints ITEM SHAFT SERIES REMARKS PTO AG35638 AG35 ⅜" (6) Q.D. 2 PTO AG2N 27x75x24x9 2 PTO AG35 32x76x27x94 4 PTO AG AG35 Fits AP385 tube ITEM SHAFT SERIES REMARKS 2 PTO AG2 27x75 3 PTO AG26900 AG2 45 mm O.D. 4 PTO AG2600 AG2 8 mm O.D. 6 PTO AG2690 AG2 45 mm O.D. 7 PTO AG2624 AG2 Fits AP43 tube 8 PTO AP065 0x65

157 8-48 PTO PARTS AND COMPONENTS REPLACEMENT CLUTCHES CLUTCHES BALL SHEAR APPLICATIONS: Spreaders, Rotary Cutters, Balers, Grain Carts, Grain Augers, Snowblowers, Forage Blowers BENEFITS: Minimal maintenance; No damaging heat generation for higher productivity; Repeatable overload setting; Smooth disengaged operation - No damaging torque spikes; Can be applied on implement or tractor shaft in North America. RATCHET APPLICATIONS: Hay Tedders, Round Balers BENEFITS: Repeatable overload setting; Torque pulses while slipping aids in dislodging plugs for increased productivity; Minimal maintenance; Audible operator notification; Compact 4" (02 mm) design. UNIVERSAL/FRICTION APPLICATIONS: Mower Conditioners, Rotary Cutters, Balers, Shredders, Snowblowers, Spreaders, Grain Carts, Mixers BENEFITS: Corrosion resistant friction discs; Minimal maintenance; Smooth operation - No damaging torque spikes; Torque carrying capability while slipping aids in dislodging plugs for increased productivity. OVERRUNNING APPLICATIONS: Grain Carts, Spreaders, Mixers, Shredders, Mower Conditioners, Rotary Cutters BENEFITS: Low-Maintenance; Allows intertia from implement to dissipate without putting load back through the tractor or system. TORQMASTER APPLICATIONS: Spreaders, Rotary Cutters, Shredders, Balers, Grain Carts, Snowblowers, Mower Conditioners, Mixers BENEFITS: Implement overload protection; Minimal maintenance; Isolates and dissipates heat - minimizing downtime for higher productivity; Repeatable overload setting; Corrosion resistant friction discs; Torque carrying capability while slipping aids in dislodging plugs for increased productivity.

158 PTO PARTS AND COMPONENTS 8-49 NORTH AMERICAN & METRIC E-KIT DISPLAY MERCHANDISERS North American P-O-P List of Contents PTO QTY PTO PTO PTO QTY PTO PTO PTO Metric P-O-P List of Contents PTO QTY PTO PTO PTO PTO PTO QTY PTO PTO PTO PTO PTO

159 8-50 PTO PARTS AND COMPONENTS NORTH AMERICAN DRIVELINE COMPONENT DISPLAY MERCHANDISERS PTO DESCRIPTION DISPLAY CENTER The Weasler Display Center is a dealer merchandiser that makes selling easy. Most parts are on display for convenient visual inventory control as well as quick self-service for the customer. The 48" x 66" floor fixture contains an inventory of driveline components in the most popular sizes. Equivalents are available for most competitive brands. 6 Series QTY Series QTY Series QTY PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO 0042 PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO Series QTY PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO DESCRIPTION DISPLAY CENTER Includes the same product as No , plus an assortment of tubing and shafting in 6' lengths. QTY PTO PTO PTO PTO PTO PTO PTO Transparency ID System QTY. PTO Header Board w/hardware QTY. PTO H

160 PTO PARTS AND COMPONENTS 8-5 NORTH AMERICAN DRIVELINE COMPONENT DISPLAY MERCHANDISERS 44/55 SERIES 44 Series QTY Series PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO DESCRIPTION DISPLAY CENTER The Weasler Display Center is a dealer merchandiser that makes selling easy. Most parts are on display for convenient visual inventory control as well as quick self-service for the customer. The 48" x 56" floor fixture contains an inventory of high horsepower driveline components in the most popular sizes. Equivalents are available for most competitive brands. QTY PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO Locking Repair Kits QTY. Shafting QTY. PTO PTO PTO PTO PTO PTO Transparency ID System QTY. PTO Header Board w/hardware QTY. PTO H

161 8-52 PTO PARTS AND COMPONENTS METRIC DRIVELINE COMPONENT DISPLAY Tractor Yoke MERCHANDISERS Outer Profile Yoke QTY. QTY. PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO DESCRIPTION DISPLAY CENTER The Weasler Display Center is a dealer merchandiser that makes selling easy. Most parts are on display for convenient visual inventory control as well as quick self-service for the customer. The 48" x 66" floor fixture contains an inventory of the most popular sizes, including inner and outer profile tubes. PTO DESCRIPTION DISPLAY CENTER The display board includes the items depicted by the display photo above. It does NOT include an assortment of inner and outer profile tubes. Lock Yoke Repair Kit QTY. PTO PTO Cross & Bearing Kit QTY PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO Inner Profile Yoke QTY. Roll Pin QTY. PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO Implement Yoke QTY. Guard QTY. 2 PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO PTO Bearing Kit (2 per kit) QTY. PTO PTO PTO PTO PTO PTO Transparency ID System QTY. PTO

162 PTO PARTS AND COMPONENTS 02/ PTO LOCKING PINS PTO 2266 PTO 2273 DESCRIPTION Westward Agri-Pak containing 2-5/6" shaft locking pins Westward Agri-Pak containing 2 - ⅜" shaft locking pins PTO ADAPTORS PTO 25 PTO 252 PTO 253 PTO 254 PTO 255 PTO 256 PTO 3742 PTO 4465 ADAPTOR TYPE FEMALE SPLINE Ø F MALE SPLINE Ø M INCREASES PTO SHAFT BY OVERALL WEIGHT (KG) PTO 25 Universal Reducer 3 /8" x 6 /8" x /8" 73 mm 5 3 /8" 36 mm 0.76 PTO 252 Long Increaser /8" x 6 3 /8" x /4" 70 mm 4 3 /4" 2 mm 0.64 PTO 253 Short Increaser /8" x 6 3 /8" x 6 /32" 34 mm 3 3 /6" 8 mm 0.27 PTO 254 Ext. Adaptors 3 /8" x 6 3 /8" x 6 7" 78 mm 9 7 /6" 240 mm.6 PTO 255 Extension Adaptor 3 /8" x 6 3 /8" x 6 4" 02 mm 5 3 /4" 46 mm 0.93 PTO Spline Adaptor 3 /8" x 2 3 /8" x 6 3 /2" 89 mm 6 /8" 56 mm 0.94 PTO 3742 Bolt Type 3 /8" x 6 3 /8" x /4" 2 mm 6 /2" 65 mm.45 PTO 4465 Bolt Type 3 /4" x 6 3 /8" x 6 5" 27 mm 7 7 /8" 200 mm 2.85 Note: There is no warranty on PTO adaptors. Special PTO Adaptor Quick Release Adaptor PTO 4895 PTO 4896 PTO 4897 DESCRIPTION " Round with 540 rpm (6 spline) /8" Round with 540 rpm (6 spline) /4" Round with 540 rpm (6 spline) PTO 4900 PTO 490 DESCRIPTION 7 /8" Round (A) with 540 rpm (6 spline) " Round (A) with 540 rpm (6 spline) PTO /8" Round with 540 rpm (6 spline) PTO 4899 /2" Round with 540 rpm (6 spline) Note: There is no warranty on PTO adaptors.

163 8-54 PTO PARTS AND COMPONENTS PTO ADAPTORS General Purpose Pump Adaptor DESCRIPTION FEMALE SPLINE Ø F Ø A Ø B OVERALL WEIGHT (KG) PTO /8" Round with 540 rpm (6 spline) 3 /8" /8" 6 mm 3 /8" 35 mm 4 5 /8" 7.5 mm 0.82 PTO /4" Round with 540 rpm (6 spline) 3 /8" /4" 9 mm 3 /8" 35 mm 4 5 /8" 7.5 mm 0.78 PTO /8" Round with 540 rpm (6 spline) 3 /8" /8" 22 mm 3 /8" 35 mm 4 5 /8" 7.5 mm 0.74 PTO 4984 " Round with 540 rpm (6 spline) 3 /8" 35 6 " 25 mm /2" 38 mm 4 5 /8" 7.5 mm 0.66 Note: There is no warranty on PTO adaptors. HEAVY DUTY PTO ADAPTORS PTO 590 PTO 5903 PTO 5865 PTO 5907 PTO 5904 PTO 5866 PTO HD844 PTO 844 PTO 8443 FEMALE SPLINE Ø F MALE SPLINE Ø M QUICK RELEASE BOLT TYPE SET SCREW INCREASES PTO SHAFT BY OVERALL 3 /8" x 6 3 /8" x 6 PTO 590 PTO /6" 0 mm 6 /2" 65 mm.40 3 /8" x 6 3 /8" x 2 PTO 5903 PTO /4" 2 mm 6 /2" 65 mm.45 3 /8" x 2 3 /8" x 6 PTO 5865 PTO /6" 0 mm 6 /2" 65 mm.45 3 /8" x 2 3 /8" x 2 PTO /4" 2 mm 6 /2" 65 mm.50 3 /4" x 20 3 /8" x 6 PTO 8443* 5" 27 mm 3 /4" x 20 3 /8" x 2 PTO 844* 5" 27 mm 7 3 /8" ØC=2 9 /6" 7 3 /8" ØC=2 9 /6" 87 mm ØC=65 mm 87 mm ØC=65 mm 3 /4" x 20 3 /8" x 2 PTO HD844 5 /2" 40 mm 7 7 /8" 200 mm /4" x 20 3 /8" x 6 PTO HD8443 5" 27 mm 7 7 /8" 200 mm 2.95 *Supplied with 2 grubscrews & locknuts. Note: There is no warranty on PTO adaptors. WEIGHT (KG).6.80

164 PTO PARTS AND COMPONENTS 8-55 PTO ADAPTERS Sleeve Increasers FEMALE SPLINE Ø F MALE SPLINE Ø M OVERALL (A) WEIGHT (KG) PTO 249 /8 x 6 3 /8 x /6" 56 mm 0.0 PTO 250 /8 x 6 3 /8 x 6 7 /8" 48 mm 0.08 PTO 249 PTO 250 Note: There is no warranty on PTO adaptors. Splined Adaptors - To 75 H.P. FEMALE SPLINE MALE SPLINE EXTENDS PTO SECURED BY PTO mm / /8" 3 /4" Cross Pin PTO * /8-6 3 /8-6 5 /2" 3 9 /6" Cross Pin PTO /8-6 3 / /6" 4 /8" Cross Pin PTO * /8-6 3 /8-6 0 /2" 8 3 /6" Cross Pin PTO * /8-6 /8-6 5 /2" 3 3 /4" Cross Pin PTO * 3 /8-6 /8-6 6 /2" 4 9 /6" Cross Pin PTO * 3 /8-6 /8-6 5 /8" 2 3 /6" Cross Pin PTO * 3 /8-6 3 /8-6 6 /2" 4 9 /6" Cross Pin PTO * 3 /8-6 3 /8-6 5 /8" 2 5 /6" Cross Pin PTO /8-2 3 /8-6 6 /2" 4 /2" Setscrew PTO /8-2 3 /4-20 7" 5" Setscrew PTO /4-6 3 /8-6 6 /2" 4 3 /4" Cross Pin PTO ⅝ - 6 ⅜ - 6 6½ 4¾ Cross Pin Capacity to operate on tractors rated to 75 PTO HP. Provide a means of connecting two dissimilar splines. Welded steel construction for added strength. PARCO-LUBRICATED rust preventative finish. Cross pins or setscrews furnished. PTO **Fits John Deere Model 400, Ariens (New Holland) Model S6 and Bollens Models HT-8 and HT-20. +Split Hub for Bolt Clamping. *Includes PTO Pins. Note: There is no warranty on PTO adaptors.

165 8-56 PTO PARTS AND COMPONENTS PTO ADAPTERS Splined Adaptors - To 25 H.P. Capacity to operate on tractors rated to 25 PTO HP. Developed for long and rugged use. Alloy steel, heat treated for extra strength. Withstands high shock loads from tractor or implement. PARCO-LUBRICATED rust preventative finish. FEMALE SPLINE MALE SPLINE EXTENDS PTO SECURED BY PTO /8-2 3 / /8" 4 3 /6" Setscrew PTO /8-2 3 / /8" 4 3 /6" Setscrew PTO /8-6 3 / /8" 4 3 /6" Setscrew PTO /8-6 3 / /8" 4 3 /6" Setscrew PTO Kwik-D-Tach Spline Adaptors - To 75 H.P. PTO FEMALE SPLINE MALE SPLINE EXTENDS PTO PTO /8-6 3 /8-6 6 /2" 4 5 /6" PTO /8-6 3 /8-2 6 /2" 4 5 /6" PTO /8-6 /8-6 6 /2" 4 5 /6" PTO /8-2 3 /8-6 6 /2" 4 5 /6" PTO /8-2 3 /8-2 6 /2" 4 5 /6" PTO Repair Kit Capacity to operate on tractors rated to 75 PTO H.P. Patented Quick Release device. New PTO Quick Release concept - Spring Loaded - rotates about 30 by hand for quick release. Dependable operation - no sticking pins - always easily operated. No sharp edges, protrusions, pins or other interferences to injure operators. Splined Adaptors - To 75 H.P. FOR TRACTORS WITH 3 /4-20 SPLINE PTO FEMALE SPLINE MALE SPLINE EXTENDS PTO PTO / / /6" Setscrew PTO ¾ - 20 ⅜ /6" Clamp PTO ¾ - 20 ⅜ /6" Clamp PTO *For applications using our standard and adaptors where heavy overhung load is a factor such as PTO mounted pumps, etc. PTO Note: There is no warranty on PTO adaptors.

166 PTO PARTS AND COMPONENTS 8-57 PTO ADAPTERS Forged PTO Adaptors - To 25 H.P. FOR TRACTORS WITH 3 /4-20 SPLINE PTO FEMALE SPLINE MALE SPLINE EXTENDS PTO PTO ¾ / /6" Clamp Type PTO ¾ / /6" Clamp Type *For applications using our standard and adaptors where heavy overhung load is a factor such as PTO mounted pumps, etc. Forged PTO Adaptors - To 75 H.P. "Forged" internal spline. Universal quick-detach slot and bolt holes - can be used with any American, British or European PTO system. Furnished with 5 /6 x /6" spring pin for direct connection to PTO. FEMALE SPLINE MALE SPLINE EXTENDS PTO PTO /8-6 3 /8-6 3" /8 Push-Pin Type PTO Adaptors - to 75 H.P. QUICK RELEASE EXTENSION ADAPTOR FEMALE SPLINE MALE SPLINE EXTENDS PTO PTO /8-6 3 / /6" 5 5 /6" PTO /8-2 3 / /6" 5 /8" PTO Repair Kit Round Shaft Adaptors - To 75 H.P. FEMALE ROUND KEYWAY MALE SPLINE EXTENDS SHAFT PTO " /4" 3 /8" /6" 3 /4" PTO /8" /4" 3 /8" /6" 3 3 /6" PTO /4" /4" 3 /8" /6" 3 3 /6" PTO /8" 5 /6" 3 /8" /6" 3 3 /6" PTO /2" 3 /8" 3 /8" /32" 4" PTO Note: There is no warranty on PTO adaptors.

167 8-58 PTO PARTS AND COMPONENTS PTO ADAPTERS Clamp Type PTO Adaptors - To 75 H.P. FEMALE SPLINE MALE SPLINE EXTENDS PTO PTO /8-6 3 / /6" 4 5 /8" PTO /8-6 3 / /6" 4 5 /8" PTO * 3 /8-6 3 /8-6 3 /4" 0 9 /6" PTO /8-2 3 / /6" 5 5 /6" *For tractor mounted pumps with spline bore. PTO Sleeve Type Splined Adaptors - To 75 H.P. FEMALE SPLINE MALE SPLINE SPECIAL APPLICATIONS PTO / /8-6 2 /4" IHC Cub & Kubota PTO /8-6 3 /8-6 2 /4" PTO /8-6 3 /8-6 2" Replaces Ford PTO /8-6 3 /4-6 2 /2" PTO OVER-RUNNING COUPLERS Hub City over-running couplers provide a safe way to protect operators and machinery where inertia of driven units (ie. rotary mowers, balers, hay conditioners, etc.) can over-run driving source. They take the push out of the driven machine and eliminate the chance of broken or twisted PTO shafts. Over-running couplers drive solidly from tractor to driven implement, but over-run smoothly when implement exceeds PTO speeds. Kwik-D-Tach Tractor Models - To 25 H.P. Capacity to operate on tractors to 25 PTO H.P. New PTO quick release concept - spring loaded - rotates about 30 by hand for quick release. Designed to operate with,000 rpm PTO's. Installation and lubrication instruction enclosed with each coupler. Patent pending. FEMALE SPLINE MALE SPLINE EXTENDS PTO PTO /8-6 3 / /6" 4 3 /6 PTO /8-6 3 / /6" 4 /6 PTO /8-2 3 / /6" 5 5 /6 PTO /8-2 3 / /6" 5 3 /6 PTO Repair Kit Note: There is no warranty on PTO adaptors.

168 PTO PARTS AND COMPONENTS 8-59 PTO ADAPTERS Tractor Models - to 75 HP Over-Running Couplers covered by Patent No. 3,233,47 - Canadian Patent No All steel welded housing Heat treated alloy steel inner sleeve. Hardened steel keys, spring loaded. Snap ring construction for quick, easy disassembly for cleaning and service. Spring roll pin for quick mounting to tractor. Convenient grease fitting for gun lubrication. Designed to operate with,000 RPM P.T.O.'s. Shipping weight 6 lbs. PART NUMBER FEMALE SPLINE MALE SPLINE EXTENDS TRACTOR P.T.O. SHAFT END SHAFT RETAINING GROOVE PTO ⅛ - 6 ⅛ /32" 4 5 /32 4 /32 PTO ⅛ - 6 ⅜ /32" 4 5 /32 4 /32 PTO ⅜ - 6 ⅛ /32" 4 5 /32 4 /32 PTO ⅜ - 6 ⅜ /32" 4 5 /32 4 /32 PTO Repair Kit FITS TRACTOR All with Cross Pin Hole Including Ford All with Cross Pin Hole Including Ford All with Cross Pin Hole Including Ford All with Cross Pin Hole Including Ford Installation and lubrication instructions enclosed with each coupler. Utility Models - to 75 HP Same construction as Standard-Duty Tractor Models. For those applications other than tractor P.T.O. shafts, where the driven shaft overruns the driver occasionally or where one shaft must override or idle part of the time. Operating speed to,000 RPM. Shipping weight 6 lbs. FEMALE SPLINE MALE EXTENSION ¼ Rd., ¼ KW ¼ Rd., ¼ KW PTO Repair Kit PTO Installation and lubrication instructions enclosed with each coupler. Note: There is no warranty on PTO adaptors.

169 8-60 PTO PARTS AND COMPONENTS PTO ADAPTERS Universal Models - To 75 H.P. Same construction as Standard-Duty Tractor Models. Universal flange for mounting sheave or sprocket, has six ⅜ holes equally spaced on 4½ Bolt Circle. Flange O.D. 5 - Hub O.D. 2¾ Operating speed to,000 RPM. Shipping Weight 6 lbs. FEMALE SLEEVE I.D. TYPE ¼ Round w/¼ keyway PTO ⅜ Round w/5/6 keyway PTO Repair Kit PTO SPLINED COUPLINGS Splined Couplings SPLINED SIZE O.D. PTO /4-6 3 /8" 2 /2" PTO /8-6 3 /8" 2 /2" PTO * 3 / /8" 2 3 /4" PTO /8" 2 /2" PTO /8" 2 3 /4" PTO /8-6 9 /6" 2 3 /4" PTO /4-6 7 /8" 3 /4" PTO /4-0 3 /4" 3 3 /4" PTO /8-6 3 /4" 3 3 /4" PTO /8-0 3 /4" 3" PTO / /4" PTO /2-6 7 /8" 3 3 /4" PTO /2-0 7 /8" 3" PTO /4-6 2 /4" 3 3 /4" PTO PTO Note: There is no warranty on PTO adaptors.

170 PTO PARTS AND COMPONENTS 8-6 PTO ADAPTERS Involute Splined Couplings NO. OF SPLINES SPLINE DESCRIPTION SPLINE O.D. COUPLING O.D. COUPLING PTO /32 DP 30 PT 0.625" 3 /8" 2" PTO /32 DP 30 PT 0.750" 3 /8" 2" PTO /32 DP 30 PT 0.875" 3 /8" 3" PTO /32 DP 30 PT.000" /2" 3" PTO /24 DP 30 PT.250" 3 /4" 3" PTO /32 DP 30 PT.375" 3 /4" 3" PTO /24 DP 30 PT.750" 2 /4" 3 3 /4" PTO /6 DP 30 PT.750" 2 /4" 3 3 /4" PTO /32 DP 30 PT.750" 2 /4" 3" Splined Shafts Extension Shafts SIZE SPLINE PTO " 6 0" PTO /8" 6 0" PTO /4" 6 0" PTO /4" 0 0" PTO /8" 6 0" PTO /2" 6 0" PTO /8" 6 0" PTO /4" 6 0" SIZE SPLINE PTO /8" /8" - 6 9" PTO /8" - 6 /8" - 6 9" Involute Splined Shafts NO OF SPLINES SPLINE DESCRIPTION SPLINE O.D. SHAFT PTO /32 DP 30 PA 0.625" 6" PTO /32 DP 30 PA 0.875" 6" PTO /32 DP 30 PA.000" 8" PTO /24 DP 30 PA.250" 0" PTO /32 DP 30 PA.375" 0" PTO /20 DP 30 PA.7000" 0" PTO /6 DP 30 PA.750" 0" PTO /32 DP 30 PA.750" 0" PTO /6 DP 30 PA 2.25" 0" Note: There is no warranty on PTO adaptors.

171 8-62 PTO PARTS AND COMPONENTS SPLINED SHAFTS Splined Shafts PTO PTO PTO DESCRIPTION /8-6 Spline, 5 /4" Long 3 /8-6 Spline, 5 /2" Long 3 /8-2 Spline, 5 /2" Long WELD-ON ADAPTORS Quick Release Weld-Ons Square Bushing Weld-Ons PTO PTO DESCRIPTION 3 /8-2 Spline, 3 5 /6" Long 3 /8-6 Spline, 3 5 /6" Long I.D. O.D. PTO /8 & " Square 3 /4" 2 /4" PTO /8" Square 2" 2 /2" PTO /4" Square 2 /4" 2 /2" COUPLINGS & SPLINED HUBS Round Bore Couplings BORE SIZE KEYWAY O.D. PTO /4" 3 /6" /2" 2 3 /4" PTO /8" 3 /6" /2" 2 3 /4" PTO " /4" 3 /4" 2 3 /4" PTO /6" /4" 3 /4" 2 3 /4" PTO /8" /4" 2" 3" PTO /6" /4" 2" 3" PTO /4" /4" 2" 3" PTO /6" 5 /6" 2" 3" PTO /8" 5 /6" 2 /8" 3" PTO /6" 3 /8" 2 /8" 3" PTO /2" 3 /8" 2 /4" 3" Use to join two shafts. Repair pulleys, gears, sprockets, etc. O.D. and I.D. concentricity not held to close limits - If precision O.D. and I.D. concentricity is required, Not drilled for setscrews.

172 PTO PARTS AND COMPONENTS Nov COUPLINGS & SPLINED HUBS Spline Bore Couplings NO. OF SPLINES SPLINE DESCRIPTION SPLINE O.D. HUB O.D. PTO B Str. Side.000" 2.00/2.000" 3 /4" PTO Module 20 PA 0.984".75/.750" 3 /4" PTO /32 DP 30 PA 0.625".25/.250" /4" PTO /32 DP 30 PA 0.750".50/.500" /2" PTO /32 DP 30 PA 0.875".50/.500" /2" PTO /32 DP 30 PA.000".75/.750" 3 /4" PTO /32 DP 30 PA.375" 2.25/2.250" 2 /8" PTO /32 DP 30 PA.500" 2.25/2.250" 2 /8" PTO /32 DP 30 PA.750" 3.00/3.000" 2 /4" PTO /24 DP 30 PA.250" 2.25/2.250" 2" PTO /20 DP 30 PA.700" 2.75/2.750" 2 /4" PTO /6 DP 30 PA.750" 3.00/3.000" 2 /4" PTO /6 DP 30 PA 2.25" 3.50/3.500" 2 3 /32" PTO /24 DP 30 PA.500" 2.25/ ¼" PTO PUMP DRIVE ADAPTORS Kwik-D-Tach Splined Pump Drive Adaptors Same safe, dependable fast action release as Kwik-D-Tach Splined Adaptors FEMALE SPLINE FEMALE ROUND* KEYWAY PTO PTO / " 3 /6 x 3 /32" 4 3 /32" PTO / " 3 /6 x 3 /32" 4 3 /32" PTO / " 3 /6 x 3 /32" 4 3 /32" PTO / " /4 x /8" 4 3 /32" PTO / " /4 x /8" 4 3 /32" PTO /8-6.25" /4 x /8" 4 3 /32" *Nominal Note: There is no warranty on PTO adaptors.

173 8-64 PTO PARTS AND COMPONENTS PTO PUMP DRIVE ADAPTORS Splined Pump Drive Adaptors PTO Pin included with all /8-6 Spline and 3 /8-6 Spline Pump Drives 3 /8-2 Spline and 3 /4-27 Spline Pump drives are supplied with Setscrews. FEMALE SPLINE FEMALE ROUND* KEYWAY PTO / " /4 x /8" 3 /8" PTO / " 3 /6 x 3 /32" 4 /32" PTO / " 3 /6 x 3 /32" 4 /32" PTO / " 3 /6 x 3 /32" 4 /32" PTO / " /4 x /8" 4 /32" PTO / " /4 x /8" 4 /32" PTO /8-6.25" /4 x /8" 4 /32" PTO / " 3 /6 x 3 /32" 4 3 /8" PTO / " 3 /6 x 3 /32" 4 3 /8" PTO / " 3 /6 x 3 /32" 4 3 /8" PTO / " /4 x /8" 4 3 /8" PTO / " /4 x /8" 4 3 /8" *Nominal PTO Note: There is no warranty on PTO adaptors.

174 PTO PARTS AND COMPONENTS 8-65 AGRI-HUB BEVEL GEAR DRIVES Dimensions A B C D E F G H I J PTO AG30AB /6 x 3 /32 KW.29* PTO AG40AB /4 x /8 KW PTO AG60AB /6 x 5 /32 KW PTO AG80AB /6 x 5 /32 KW PTO AG00AB /8 x 3 /6 KW *.25 effective keyway on AG30, 2/ straight bevel ratio. K L M N O P R S V W X PTO AG30AB /6-8UNC-2B PTO AG40AB /8-6UNC-2B N/A PTO AG60AB /2-3UNC-2B N/A PTO AG80AB /2-3UNC-2B N/A PTO AG00AB /2-3UNC-2B N/A Dimensions subject to change without notice. NOTE: Specify ratio when ordering: i.e. -,.5-, 2- Standard Styles Available: - Ratio Maximum Input Horsepower INPUT (PINION) RPM MODEL AG AG AG AG AG Ratio Maximum Input Horsepower INPUT (PINION) RPM MODEL AG AG AG AG AG Ratio Maximum Input Horsepower INPUT (PINION) RPM MODEL AG AG AG AG AG