CYLINDER CONNECTORS.
|
|
- Brice Sims
- 5 years ago
- Views:
Transcription
1 ULTR HIGH PURITY INSTRUMENTTION YLINDER ONNETORS
2 ylinder onnectors Uni-Lok ylinder onnectors are designed and manufactured for the connection of high purity gases in process applications. Features UHP(Ultra High Purity) grade 316LSS material with low Sulfur and Manganese for higher weldability in comply with SEMI F-20 Patented design with bearing for easy and safety installation Plug Gasket Gland earing Nut Electro polished internal surfaces and specially cleaned to meet ultra high purity system requirements Sliver plated female threads for easy of assembly, consistent make-up and prevention of galling Helium Leak Test Uni-Lok fittings are rated to a helium leak rate of less than 1x10-9 mbar.l/sec and tested in accordance with SEM STD and SEMI F1-96. Particle ontribution Test ccording to STM F Moisture ontribution Test ccording to SEM STD. ssembling ccording to SEMI E49.6. Packaging Each component is double bagged to ensure component cleanliness and to protect it from environmental contamination. Referenced specification : SEMI E49.1. leaning ll components are precisely cleaned with 18 deionized water after the passivation procedure. Reference specification : SEMI E
3 ylinder onnectors Gases ssignment Table GS DISS G JIS GS DISS G JIS mmonia R Hydrogen L rgon /23-R Hydrogen romide R rsenic Pentafluoride 642 Hydrogen hloride R rsine L Hydrogen Fluoride R oron Trichloride L Hydrogen Iodide oron Trifluoride L Hydrogen Selenide romochlorodifluoromethane 660 Hydrogen Sulfide romotrifluoromethane 660 Isobutane 510 utane L Isobutylene L arbon Dioxide Krypton /23-R arbon Monoxide L Neon /23-R arbonyl Sulfide 330 Nitrogen /23-R hlorine R Nitrous Oxide hlorine Trifluoride L Oxygen /23-R hlorodifluoromethane 660 Perfluonopropane hlorotrifluoromethane 660 Phosgene R Diborane L Phosphine Dichlorodifluoromethane PhosphorusPentafluoride Dichlorofluoromethane 660 Silane Dichlorosllane Silioon Tetrachloride 636 Dichlorotetrafluoroethane 660 Silicon Tetrafluoride Diethylzine Sulphur Dioxide , 16 Difluoroethylene L Sulphur Hexafluoride Dimethylzinc 726 Trichorosilane 636 Dimethylamine /26-L Trichlorotrifluoroethane Dimethylether L Trichlorofluoromethane 660 Disllane 632 Triethylaluminium Ethane L Trifluoromethane 660 Ethyl hloride L Trimethylamine L Ethylene L Tungsten Hexafluoride Fluorine R Vinyl romide L Germane Vinyl hloride L Halocarbons Vinyl Fluoride L Helium /23-R Xenon /26-L Sources : G V1 2005, JIS 8244/ , ISO/DOS This table is the reference only. 3
4 G & JIS Series G and JIS Series Materials of onstruction Plug Gasket Gland earing Nut Ordering Information Every cylinder connectors are ordered as assembled set. lso each parts of cylinder connector are ordered separately with the part numbers as shown below. G Series G No. Ordering Part Number ssembled Set Gland earing Nut Gasket Plug 296 U-296 UGL-08S X UM-0803R X UPG U-320 UGL-01S UR-01 UF-0830R UGT-01 UPG U-326 UGL-04S UR-01 UF-0830R X UPG U-330 UGL-01S UR-01 UF-0830L UGT-01 UPG U-350 UGL-05S UR-01 UF-0830L X UPG U-510 UGL-06S X UM-0880L X UPG U-540 UGL-09S UR-02 UF-0908R X UPG U-580 UGL-06S X UM-0960R X UPG U-590 UGL-06S X UM-0960L X UPG U-660 UGL-03S UR-02 UF-1035R UGT-03 UPG U-670 UGL-03S UR-02 UF-1035L UGT-03 UPG U-678 UGL-07S UR-02 UF-1035L UGT-01 UPG U-679 UGL-10S UR-02 UF-1035L UGT-05 UPG-679 JIS Series JIS No. Ordering Part Number ssembled Set Gland earing Nut Gasket Plug 21-14L U-J2114L UGL-11S UR-01 UF-JS21L UGT-02 UPG-21L 21-14R U-J2114R UGL-11S UR-01 UF-JS21R UGT-02 UPG-21R 22-14L U-J2214L UGL-02S UR-01 UF-JS22L UGT-02 UPG-22L 22-14R U-J2214R UGL-02S UR-01 UF-JS22R UGT-02 UPG-22R 23-14R U-J2314R UGL-02S UR-01 UF-JS23R UGT-02 UPG-23R 26-14L U-J2614L UGL-02S UR-02 UF-JS26L UGT-03 UPG-26L 26-14R U-J2614R UGL-02S UR-02 UF-JS26R UGT-03 UPG-26R 4
5 G & JIS Series Typical ssembly Type Gland + Male Nut + Female Plug Type Gland + Female Nut + Male Plug + earing + Gasket Type Gland + Female Nut + Male Plug + earing Nut Plug earing Nut Gasket Plug earing Nut Plug L L L G Series G No. Type Overall Length Nut Plug Gasket inch mm Hex Flat Material 296 U UNS-2-RH-EXT UNS-2-RH-INT X 320 U NGO-RH-INT NGO-RH-EXT PTFE/R 326 U NGO-RH-INT NGO-RH-EXT X 330 U NGO-LH-INT NGO-LH-EXT PTFE/R 350 U NGO-LH-INT NGO-LH-EXT X 510 U NGO-LH-EXT NGO-LH-INT X 540 U NGO-RH-INT NGO-RH-EXT X 580 U NGO-RH-EXT NGO-RH-INT X 590 U NGO-LH-EXT NGO-LH-INT X 660 U NGO-RH-INT NGO-RH-EXT PTFE/R 670 U NGO-LH-INT NGO-LH-EXT PTFE/R 678 U NGO-LH-INT NGO-LH-EXT PTFE 679 U NGO-LH-INT NGO-LH-EXT PTFE JIS Series JIS No. Type Overall Length Nut Plug Gasket inch mm Hex Flat Material L U-J2114L JIS L JIS L PTFE/R R U-J2114R JIS R JIS R PTFE/R L U-J2214L JIS22-14-OL JIS22-14-OL PTFE/R R U-J2214R JIS22-14-OR JIS22-14-OR PTFE/R R U-J2314R JIS R JIS R PTFE/R L U-J2614L JIS L JIS L PTFE/R R U-J2614R JIS R JIS R PTFE/R 3/8 and 1/2 Glands are available for every G & JIS series cylinder connectors. To order, add -06 for 3/8 and -08 for 1/2. Examples : U , G 350 ylinder onnector set with 3/8 Gland. 5
6 G & JIS Series Glands Type- D D UGL-06S 65.3 UGL-08S Type- D D UGL-01S 52.5 UGL-02S 55.5 UGL-03S 58.0 UGL-07S Type- TYPE D UGL-10S 66.7 UGL-11S 55.5 D UGL-04S 66.2 UGL-05S UGL-09S /8 and 1/2 Glands are available for every G & JIS series. To order, add -06 for 3/8 and -08 for 1/2. Examples : UGL-09S-08, 1/2 size G 540 Gland. earings UR UR Gaskets Gasket with 316SS Ring UGT UGT UGT Gasket without 316SS Ring UGT UGT PTFE instead of PTFE is available upon request. To order, add - TF to the end of part number. Example : UGT-02-TF 1.6 6
7 G & JIS Series Nuts Female Nuts (Hex) UF-0830L NGO-LH-INT UF-0830L NGO-LH-INT UF-0830R NGO-RH-INT UF-0830R NGO-RH-INT UF-0908R NGO-RH-INT UF-1035L NGO-LH-INT UF-1035L NGO-LH-INT UF-1035L NGO-LH-INT UF-1035R NGO-RH-INT UF-JS21L JIS L UF-JS21R JIS R UF-JS22L JIS22-14-OL UF-JS22R JIS22-14-OR UF-JS23R JIS R UF-JS26L JIS L UF-JS26R JIS R Male Nuts (Hex) UM-0803R UNS-2-RH-EXT UM-0880L NGO-LH-EXT UM-0960L NGO-LH-EXT UM-0960R NGO-RH-EXT 7
8 G & JIS Series Plugs Female Plugs (Hex) UPG UNS-2-RH-INT UPG NGO-LH-INT UPG NGO-RH-INT UPG NGO-LH-INT Male Plugs (Hex) UPG NGO-RH-EXT UPG NGO-RH-EXT UPG NGO-LH-EXT UPG NGO-LH-EXT UPG NGO-RH-EXT UPG NGO-RH-EXT UPG NGO-LH-EXT UPG NGO-LH-EXT UPG NGO-LH-EXT UPG-21R JIS R UPG-21L JIS L UPG-22R JIS22-14-OR UPG-22L JIS22-14-OL UPG-23R JIS R UPG-26R JIS R UPG-26L JIS L 8
9 DISS Series DISS Series Materials of onstruction Plug Gasket Gland earing Nut Ordering Information Every cylinder connectors are ordered as assembled set. lso each parts of cylinder connector are ordered separately with the part numbers as shown below. DISS No. ssembled Set Ordering Part Number Gland earing Nut Nickel Gasket PTFE 632 U-D632 UGL-632 UR-02 UF-1035R UNGT-D UGT-D UPG U-D634 UGL-634 UR-02 UF-1035R UNGT-D UGT-D UPG U-D636 UGL-636 UR-02 UF-1035R UNGT-D UGT-D UPG U-D638 UGL-638 UR-02 UF-1035R UNGT-D UGT-D UPG U-D640 UGL-640 UR-02 UF-1035R UNGT-D UGT-D UPG U-D642 UGL-642 UR-02 UF-1035R UNGT-D UGT-D UPG U-D712 UGL-712 UR-02 UF-1130R UNGT-D UGT-D UPG U-D714 UGL-714 UR-02 UF-1130R UNGT-D UGT-D UPG U-D716 UGL-716 UR-02 UF-1130R UNGT-D UGT-D UPG U-D718 UGL-718 UR-02 UF-1130R UNGT-D UGT-D UPG U-D720 UGL-720 UR-02 UF-1130R UNGT-D UGT-D UPG U-D722 UGL-722 UR-02 UF-1130R UNGT-D UGT-D UPG U-D724 UGL-724 UR-02 UF-1130R UNGT-D UGT-D UPG U-D726 UGL-726 UR-02 UF-1130R UNGT-D UGT-D UPG U-D728 UGL-728 UR-02 UF-1130R UNGT-D UGT-D UPG-728 3/8 and 1/2 Glands are available for every DISS series cylinder connectors. To order, add -06 for 3/8 and -08 for 1/2. Examples : U-D712-08, DISS 712 ylinder onnector set with 1/2 Gland. Plug 9
10 DISS Series Typical ssembly Gland + Male Nut + earing + Gasket + Female Plug L DISS No. 632 U-D U-D U-D U-D U-D U-D U-D U-D U-D U-D U-D U-D U-D U-D U-D728 Overall Length L Hex Flat inch mm inch mm NGO-RH-INT NGO-RH-INT Glands D 3/8 and 1/2 Glands are available for every DISS series. To order, add -06 for 3/8 and -08 for 1/2. Examples : UGL , 3/8 size DISS 632 Gland. UGL-632 UGL-634 UGL-636 UGL-638 UGL-640 UGL-642 UGL-712 UGL-714 UGL-716 UGL-718 UGL-720 UGL-722 UGL-724 UGL-726 UGL-728 D
11 DISS Series earing UR Gasket Material UGT-D PTFE UNGT-D Nickel Female Nut (Hex) Male Plug (Hex) UPG-632 UPG-634 UPG-636 UPG NGO-RH-EXT UPG-640 UPG-642 UPG-712 UPG-714 UPG UPG-718 UPG-720 UPG NGO-RH-EXT UPG-724 UPG-726 UPG
12
13
HD and HDL Single-Stage Non-Lube Gas Compressors
COMPRESSORS CB-324 2013/05 Ethylene Ethylene Oxide HCFC s Helium n-heptane n-hexane Hydrogen Hydrogen Chloride Hydrogen Sulfide Isobutane Isobutene Isobutylene Isopentane Methane Methanol Methyl Acetylene
More informationCONTENTS CGA SERIES GAS CONNECTION ASSIGNMENT TABLE. 2 TK-FUJIKIN UHP Products / Fitting Series
CONTENTS CGA DISS SERIES CGA & DIN / JIS SERIES NIPPLES - 10 Series 316L Staless Steel. Non-rotatg design. eat code traceability. NUTS - 20 Series 303 Staless Steel Silver Plated. GASKETS - 30 Series Nickel
More informationVALVES STAINLESS STEEL HIGH PRESSURE CYLINDER VALVES
STAINLESS STEEL HIGH PRESSURE CYLINDER VALVES SUS series ( FOR SPECIALTY GAS ) SUS/SCR series ( FOR SPECIALTY GAS ) FS/FSC series ( FOR SPECIALTY GAS ) AD-M/AD-P series ( FOR SPECIALTY GAS - CORROSIVE
More informationDownloaded from
FORWARD 1. This standard is approved for use by all Departments and Agencies of the Department of Defense (DoD). 2. This standard covers a common color code system for the identification of materials in
More informationReplacement Tubes for Gillian Gas Detection Pumps
236SA S 1,1,2-Trichloroethane (10-100 ppm) 235SA S 1,1-Dichloroethane (10-160 ppm) 230SA S 1,2-Dichloroethane (5-50 ppm) 145SA S 1,2-Dichloroethylene (4.2-840 ppm) 194S S 1,3-Dichloropropane (10-500 ppm)
More informationMIL-STD-101B 3 DECEMBER 1970 SUPERSEDING MIL-STD-101A 13 AUGUST 1961 MILITARY STANDARD COLOR CODE FOR PIPELINES AND FOR COMPRESSED GAS CYLINDERS
3 DECEMBER 1970 SUPERSEDING MIL-STD-101A 13 AUGUST 1961 MILITARY STANDARD COLOR CODE FOR PIPELINES AND FOR COMPRESSED GAS CYLINDERS FSC 8120 DEPARTMENT OF DEFENSE Washington, D.C. 20301 Color Code for
More informationSherwood Valve LLC EVERY COUNTRY EVERY CUSTOMER EVERY CODE. GVSERIES Industrial and Chrome Plated Precision Valves
Sherwood Valve LLC EVERY COUNTRY EVERY CUSTOMER EVERY CODE GVSERIES Industrial and Chrome Plated Precision Valves SHERWOOD GLOBAL VALVE FEATURES Durable forged brass body, precisely machined internal components
More informationSAM Speedy Accurate Maintainable
SAM Speedy Accurate Maintainable Instruction Manual for Digital Mass Flow Controller SFC2480F Series Hitachi Metals, Ltd. Kuwana Create Co., Ltd. SAM RESEARCH Z2R-06002 Table of contents 1. Preface...1
More informationModel 912. Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder).
Models, 3, and SME Section VIII, ir/steam/gas/liquid, UV National oard ertified. lso available for Vacuum Service. PED ertified for Non-Hazardous Gas. pplications ir/gas compressors - intercoolers - aftercoolers.
More informationHandle operated, metal seated master shut off valve in O-ring seal design for high pressure gas manifold & piping system
Handle operated, metal seated master shut off valve in O-ring seal design for high pressure gas manifold & piping system Exceeds industry standards Provides high flow and resistance to ignition in Oxygen
More informationProfessional Chemical Analyzer Service / BigDipper TechnoChem Institute, Beijing China. Hand held Single Gas Analyzer H-BD5gas
Professional Chemical Analyzer Service / BigDipper TechnoChem Institute, Beijing China Hand held Single Gas Analyzer H-BD5gas Gas Analyzer Special Application Configuration for Industrial and Research
More informationINSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES
INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES www.unilok.com Since 1984 INSTRUMENTATION Application VB1 series General Ball Valve MWP : 1000psig/69bar with PTFE seats, 2000psig/137bar with TFM seats
More informationColorimetric Gas Detector Tube System US Dollar Price List
Colorimetric Gas Detector Tube System US Dollar Price List Sensidyne, LP - Gas Detector Tube Price List Effective Date: February 12, 2012 Rev. A 010612 Table of Contents Gas Detection Pump Kit & Accessories
More informationgc applications Hydrocarbons C1-C5 Paraffins Hydrocarbons, Sulfur Gases C1-C2 Hydrocarbons Gases
C-C Hydrocarbons C-C Paraffins. Methane. Carbon Dioxide. Ethylene. Ethane. Acetylene. Methane (0.9%). Ethane (0.09%). Propane (0.099%). Isobutane (0.09%). Butane (0.09%). n-pentane (0.00%) Column: ft x
More informationCompressed Gas Equipment
Compressed Gas Equipment 1-888-50VALVE (508-258) TABLE OF CONTENTS PRODUCT INFORMATION AND ORDERING AV Series Acetylene Valve 01 AVB & AVMC Series Acetylene Valves 0 AV Series for WB Acetylene Valves 5
More informationBellows-sealed Valves
ellows-sealed Valves ellows-sealed Valves V-64 SVH Series High Pressure ellows-sealed Valves Features Packless valves with all-metal seal to atmosphere ompact designed body with minimal dead space 16 SS
More informationPremier Portable Instruments
GX-6000 Six Sensor Sample Draw Gas Monitor Price onfigurator Base Instrument 4 Gas Sensors Smart Sensor 1 Smart Sensor 2 Battery 72-6 A B X - Step 1 Step 2 Step 3 Step 4 4 Gas Sensors Smart Sensor 1 Smart
More informationStainless Steel. Tube, Pipe. Fittings
Components MNUFCTURING SSEMLY TESTING Stainless Steel Tube, Pipe Fittings One Trusted Source - Worldwide If ever there were industries with a low tolerance for imperfection, they would be the semiconductor,
More informationSeries Valves Valves. Introducing the next generation of Global Valves for High-Pressure Applications Sherwood s new GVH Series!
Series Valves Valves Series Introducing the next generation of Global Valves for High-Pressure Applications Sherwood s new GVH Series! Leak rate 10 times better than the industry standard for extreme environments.
More informationANDERSON GREENWOOD. Flow Control. Anderson Greenwood Series 60 and 80 Direct Spring Operated Pressure Relief Valves
NDERSON GREENWOOD Soft seat design as standard. Provides repeatable leak-tight performance before and after each relief cycle. Leak-tight performance near set pressure. llows higher operating pressure
More informationTechnology for a Better Future. VALVES International Edition.
www.genstartech.com VALVES International Edition (Needle Valve, Metering Valve, Ball Valve, Diaphragm Valve, Gauge Valve, Check Valve, Excess Flow Valve, Relief Valve, Cylinder Valve) Technology for a
More informationValve Types and Features
Valve Types and Features The three basic functions of valves are: 1. to stop flow, 2. to keep a constant direction of flow, and 3. to regulate the flow rate and pressure. To select the correct valve to
More informationKey operated cylinder valve in O-ring seal design for carbon dioxide
Key operated cylinder valve in O-ring seal design for carbon dioxide SKN-12/C Robust construction High performance and ease of maintenance Resistant to stress corrosion cracking TPED Certification ( mark)
More informationVCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
More informationGRPV Series Residual Pressure Valves
Residual pressure valve designed to protect cylinder and contents. Key Features & Benefits Prevents backflow of impurities and foreign substances Automated assembly and testing processes ensure exceptional
More informationAnderson Greenwood DSOPRV Catalog Series 60 and 80
Direct spring operated pressure relief valves for premium performance. Using special internals and soft seats to provide optimum, accurate performance. General application Our premium performance direct
More informationINSTRUMENTATION UNION BONNET VALVES. VU6 Series.
INSTRUMENTATION UNION BONNET VALVES VU6 Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @38 (100 ) Temperature rating from -53 (-65 ) to 232 (450 ) with standard PTFE packing, up
More informationBALL VALVES - VB3 Series
1 Piece Integral Stem Materials of Construction No. Description Body Material 1 Handle Directional Handle Materials Nylon Panel Mountable Nut Various End Connections & Sizes Compact 1 Piece Body BALL VALVES
More informationBourdon Tube Pressure Gauges Ultra High Purity (UHP) Series Type
Mechanical Pressure Measurement Bourdon Tube Pressure Gauges Ultra High Purity (UHP) Series Type 230.15 WIKA Datasheet 230.15 Applications Semiconductor and electronic industry, medical industry, gene
More informationHIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
More informationData. Data. Valve Types and Features. Valve Sizing Procedures. Cv Value Calculation. Conversion Formula for Reference. Guidance for Vacuum Use
Data Valve Types and Features Valve Sizing Procedures Cv Value Calculation Conversion Formula for Reference Guidance for Vacuum Use Velocity Calculation Noise Prediction Methods and Countermeasures Calculation
More informationClean Fittings. No.06-2 August 2015
Clean Fittings No.06-2 ugust 205 Clean Fitting Contents Clean Weld Fittings Mini lbow WM Mini ee WM Mini Cross WMX Mini educing lbow WM Mini educing ee WM Mini educing Union WMU ong lbow W ong ee W ong
More informationKing Lai Hygienic Materials Co., Ltd. CDA/ Bulk Gas / UHP Gas Delivery System
King Lai Hygienic Materials Co., Ltd. CDA/ Bulk Gas / UHP Gas Delivery System Introduction 1 King Lai Standard and Specifications 2 Cleaning & Packaging Process Tube & Pipe 34 56 TUBE PIPE ASTM PIPE JIS
More informationS, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel
More informationBourdon Tube Pressure Gauges Ultra High Purity (UHP) Series Type
Bourdon Tube Pressure Gauges Ultra High Purity (UHP) Series Type 230.15 Mechanical Pressure Measurement WIKA Datasheet 230.15 Applications Semiconductor and electronic industry, medical industry, gene
More informationINSTRUMENTATION METERING VALVES. VMT Series.
INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204
More informationEvans G-Series Integrated Gas Sticks
Evans G-Series Integrated Gas Sticks G-SERIES CFOS Stick Features Series CV GS 0.14 GM 1. GL 1.80 Working Pressure 0 psig (34.5 Bar) 0 psig (34.5 Bar) 0 psig (34.5 Bar) Operating Temperature - F to 1 F
More informationTechnical Specifications for Sherwood Compressed Gas Valves
Technical Specifications for Sherwood Compressed Gas Valves 2111 Liberty Drive Niagara Falls New York 14304-37444 Telephone: 716-283-1010 Fax: 716-283-5737 Toll Free: 888-50VALVE (508-2583) Toll Free Fax:
More informationHM SERIES ULTRA-HIGH PURITY, METAL-DIAPHRAGM VALVES FOR GAS DELIVERY SYSTEMS ULTRA CLEAN VALVES
HM SERIES ULTRA-HIGH PURITY, METAL-DIAPHRAGM VALVES FOR GAS DELIVERY SYSTEMS HM & HMS SERIES METAL DIAPHRAGM VALVES The HM & HMS Series includes Metal-Diaphragm, Ultra- Clean s, size 1/4". The HM & HMS
More informationCheck Valves, Filters and Relief Valves
Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Check Valves Catalog 4135-CV Introduction Parker Series Check Valves are designed for uni-directional flow control of fluids
More informationVCR Metal Gasket Face Seal Fittings
lloy 2507 Super uplex Weld Fittings 1 www.swagelok.com Metal Gasket Face Seal Fittings WL 1/16 to 1 in. and 6 to 18 mm sizes High-purity stainless steels The original design, the authentic brand 2 Weld,,
More information3 Piece Full Port Ball Valves, 1 /4-12 Wide Selection of End Connections
Bray High Performance ompany Subsidiary of BRY INTERNTIONL, Inc. 3 Piece Full Port Ball Valves, 1 /4-1 Wide Selection of End onnections Series 7000 & Series 8000 Model 7000-31SS Model 8000-WB Flow-Tek
More informationBourdon Tube Pressure Gauges Ultra High Purity (UHP) Series Type
Bourdon Tube Pressure Gauges Ultra High Purity (UHP) Series Type 230.15 Mechanical Pressure Measurement WIKA Datasheet 230.15 Applications Semiconductor and electronic industry, medical industry, gene
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationTUBE FITTINGS INSTRUMENTATION.
TUBE FITTINGS INSTRUMENTATION www.unilok.com We, Uni-Lok corporation, have distinguished ourselves in the design and manufacturing of a high performance Twin Ferrule Compression Fittings and Instrumentation
More informationVanessa Series 30,000 Triple Offset Valves* Cryogenic Configuration
* ryogenic onfiguration virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations Features General applications
More informationTUBE FITTINGS INSTRUMENTATION.
TUBE FITTINGS INSTRUMENTATION www.unilok.com We, Uni-Lok corporation, have distinguished ourselves in the design and manufacturing of a high performance Twin Ferrule Compression and Instrumentation Valves
More informationKTM Three-Way Floating Ball Valves 2-seats (L-port) and 4-seats (L&T-port) General applications Diverting or mixing fluids
KTM Three-Way Floating all Valves -seats (L-port) and 4-seats (L&T-port) KTM single KTM 3-way ball valve replaces several -way saving valuable space and simplifying piping Features Positive alignment of
More informationThe model M Valve Manifold is designed for direct mounting the manifold and transmitter together in a convenient and accessible location.
200 Series M-220 & M-222 2-Valve Manifolds The model M-220 2-Valve Manifold is designed for remote mounting of a static or gauge transmitter. This design permits the user to mount each unit separately
More informationSemiconductor / High Purity Products FITTINGS TK SCT. Weld Fittings / Metal Seal Fittings. SCT Division
Semiconductor / High Purity Products K SC IINGS Weld ittings / etal Seal ittings SC ivision K SC SUPR CN CHNOOGY ICRO W IINGS ORG W IINGS C S IINGS 2 Super Clean itting Series W and etal Seal ittings components
More informationC2, C3, C4 Monomer Analysis
C2, C3, C4 Monomer Analysis Malgorzata Sierocinska Agilent Technologies Waldbronn Page 1 Why Analyze Monomers? To Insure Consistent Production of High Quality Polymer Protect against food contamination
More informationEvans SS-G & GXL -Series Integrated Stainless Gas Sticks
SS-G & GXL -Series Integrated Stainless Gas Sticks Features G & GXL Series 316SS CF8M Body Construction Cleaned and packaged in cleanroom 2-PC Design G-series allows for isolation and removal of regulator
More informationVANESSA SERIES 30,000 TRIPLE OFFSET VALVES* CRYOGENIC CONFIGURATION
VNESS SERIES 30,000 TRIPE OFFSET VVES* RYOGENI ONFIGURTION virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations
More informationFCI GF SERIES. FCI GF Series. Versatile High Performance Mass Flow Meter for Gas Applications
FCI GF Series Versatile High Performance Mass Flow Meter for Gas Applications FCI GF SERIES Flare Gas Fuel Gas Scrubber Balancing Landfill Vapor Recovery Exhaust Stack Make-up Gas Natural Gas Pipeline
More informationInstrument Ball Valves
Instrument Ball s 40 Series On-Off, Switching, and rossover 1/16 to 3/4 in. and 3 to 12 mm end connections Pressures to 3000 psig (206 bar) Virtually no dead space www.swagelok.com 40 Series s Features
More informationSpecial Alloy Ball Valves
www.swagelok.com Special Alloy Ball Valves 60 Series 3/8 to 1 in. sizes Alloy 625, alloy 825, alloy 2507 super duplex stainless steel, and 6-moly materials On-off (2-way) valves Compensating seat design
More informationFILTRATION SYSTEMS CARBOX PHARMACEUTICAL HOODS ACTIVATED CHARCOAL FILTERS
CARBOX FILTRATION SYSTEMS 47 Filtration systems for the treatment of harmful fumes resulting from chemical processings. INDEX PHARMACEUTICAL HOODS 49 ACTIVATED CHARCOAL FILTERS 53 48 CAP-FARM 60 Aspirated
More information... i. ... ii. ... iii. ... v. ... vii. General Characteristics & Order Information. ... x ... A ... B ... C ... D ... E
M E H N I L L Y T T H E F I T T I N G S Table of ontents Table of ontents.............................................................................. i etailed Table of ontents..............................................................................
More informationIntroduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas
More informationModels 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/ Steam/Liquid, UV National Board Certified. Also available for Vacuum Service Model 921: Steel body and bonnet with plain lift lever
More informationSynonym(s) ) Chlorine, liquefied/gas. Ammonia, Gasoline, natural 7300 (gasoline) Hydrogen gas. Phosgene
Use Quantities Standard for Hazardous Chemicals (2013) 1 Chlorine Chlorine, liquefied/gas 7782-50-5 2 Annonia Ammonia, 7664-41-7 3 Petroleum gases, liquified 0 68476-85-7 4 Hhdrogen Sulphide 7783-06-4
More informationBe llows-se aled Valve s
www.swagelok.com Be llows-se aled Valve s U Secondary containment system above the bellows Working pressures up to 2500 psig (172 bar) Temperatures up to 1200 F (648 C) 1/4, 3/8, 1/2, 3/4, and 1 in.; 6,
More informationBeverage Grade Carbon Dioxide
Analysis by Gas Chromatography Engineered Solutions, Guaranteed Results. WASSON - ECE INSTRUMENTATION The Challenge Carbon dioxide, used in the production of carbonated soft drinks and other beverages,
More informationHIGH PRESSURE BAR STOCK BALL VALVES. VB6B Series.
HIGH PRESSURE BAR STOCK BA VAVES VB6B Series www.unilok.com s - VB6B Series Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PTFE seats 10000psig (689bar) @21 (70 ) with optional
More informationBellows-Sealed Valves
www.swagelok.com ellows-sealed Valves Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections rass, stainless steel, and
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board/ACLASS 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Eurofins Toxics, Inc. 180 Blue Ravine
More informationUltra High Purity Transducer, Ex na nl Models WU-20, WU-25 and WU-26
Electronic Pressure Measurement Ultra High Purity Transducer, Ex na nl Models WU-20, WU-25 and WU-26 WIKA Datasheet WU-2X Applications Gas panels for OEM tools Semiconductor, flat panel display and photovoltaic
More informationDucting & Ventilation Components
Ducting & Ventilation Components 111 Powell Road Independence, MO 64056 visit www.hemcocorp.com Phone: 816-796-2900 Fax : 816-796-3333 E-Mail : info@hemcocorp.com Exhaust Blowers are constructed of chemical
More informationTHREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
More informationInstrument Ball Valves
www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option
More informationSCREWED BONNET NEEDLE VALVES
SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5
More informationT-TYPE & IN-LINE FILTERS
T-TYPE & IN-LINE H-600R, H-600R CNG & H-600 SERIES H-600R FEATURES Bar Stock 316 St.St. or Brass Construction On-line Maintenance High-Pressure Characteristics 6000 psi (413 bar) in 316St.St. and 2000
More informationIntroduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production
More informationTHREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
More informationModels 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service.
Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service. Pressure and Temperature Limits Models 912, 913, 918, 919 Steam 3 to 250
More informationReliable enough to handle high-purity gas KITZ-SCT's series of fittings
Ultra High Purity Fittings FITTING Reliable enough to handle high-purity gas KITZ-SCT's series of fittings In the IT era, semiconductor-related products are becoming more advanced at an accelerated pace
More informationBall Valves. General Purpose and Special Application. 60 Series. 1/8 to 2 in. and 6 to 25 mm sizes
Ball s, General Purpose and Special Application60 1 www.swagelok.com Ball s General Purpose and Special Application 60 1/8 to 2 in. and 6 to 25 mm sizes Stainless steel, carbon steel, brass, and special
More informationCheck Valves (CO Series) Catalog 4130-CO Revised, June 2001
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas
More informationCOMMERCIAL ITEM DESCRIPTION CYLINDER, COMPRESSED GAS: DOT SPECIFICATIONS 4B, 4BA, 4BW, AND 4E
INCH-POUND 7 June 2010 SUPERSEDING A-A-59666A 24 February 2005 COMMERCIAL ITEM DESCRIPTION CYLINDER, COMPRESSED GAS: DOT SPECIFICATIONS 4B, 4BA, 4BW, AND 4E The General Services Administration has authorized
More informationSupplementary information
Supplementary information An Optoelectronic Nose for Detection of Toxic Gases Sung H. Lim, Liang Feng, Jonathan W. Kemling, Christopher J. Musto, Kenneth S. Suslick * Department of Chemistry, University
More informationD iaphragm Valve s. for Atomic L aye r D e position. Atomic Layer Deposition (ALD) Diaphragm Valves.
www.swagelok.com D iaphragm Valve s for tomic L aye r D e position tomic Layer Deposition (LD) Diaphragm Valves Ultrahigh cycle life with high-speed actuation C v range from 0.27 to 0.62 Up to 392 F (200
More informationOmnisafe High Performance Metal Face Seal, Multi Mate Demate, Torque Elimination Fittings No loosening, No particles
Omnisafe High Performance Metal Face Seal, Multi Mate Demate, Torque Elimination Fittings No loosening, No particles For use in nuclear reactors www.omnisafe.net August 9, 2014 1 Nuclear Reactor Applications
More informationOBSOLETE DOCUMENT. 95 Series Industrial Pressure Regulators. Bulletin 71.1:95.
95 Series Industrial Pressure Regulators W5091 / IL W1894-1 / IL TYPE 95LD TYPE 95L W6195 / IL Figure 1. 95 Series Pressure Reducing Regulators TYPE 95LD (FLNGED) www.emersonprocess.com/regulators ulletin
More informationA single KTM 3-Way ball valve replaces several 2-Way saving valuable space and simplifying piping
single KTM -Way ball valve replaces several -Way saving valuable space and simplifying piping Features Positive alignment of body low out-proof stem Sphericity tolerance of the ball is unsurpassed Reinforced
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK retby usiness Park Ashby Road Stanhope urton upon Trent Staffordshire DE15 0YZ Contact: Mr R M Allen Tel: +44 (0)1283 216334 Fax: +44 (0)1283
More informationEngine Emission Control 6.7L Diesel
Page 1 of 6 SECTION 303-08: Engine Emission Control 2011 F-250, 350, 450, 550 Super Duty Workshop Manual DESCRIPTION AND OPERATION Procedure revision date: 03/12/2010 Engine Emission Control 6.7L Diesel
More informationA PREMIER SERIES FLAT FACE COUPLERS ISO Interchange
A PREMIER SERIES FLAT FACE COUPLERS ISO 16028 Interchange The A Premier Series Flat Face ISO 16028 Interchange Couplings offer higher pressure ratings, superior flow characteristics, and lower pressure
More informationCheck Valves (C Series) Catalog 4130-C Revised, July 2004
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker C Series Check Valves are designed for uni-directional flow control of fluids and gases in industries such as chemical processing,
More informationBe llows-se aled Valve s
www.swagelok.com Be llows-se aled s B Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections Brass, stainless steel,
More informationANALYSIS AND MANAGEMENT OF GAS PROCESSES FROM REMOTE
ANALYSIS AND MANAGEMENT OF GAS PROCESSES FROM REMOTE + INGRID CITY GATE STATION INGRID GAS CONTROL CENTER What is? H2 INJECTION is a modular multi-function system based on:, A NEW METHOD OF MANAGING THE
More informationValves, Automation & Controls SERIES 88 HIGH PURITY TUBE FULL PORT 3-PIECE BALL VALVE
Valves, Automation & Controls SERIES 88 HIGH PURITY TUBE FULL PORT 3-PIECE BALL VALVE Design & Features ASME / BPE-2009 Designed specifically for the demanding process requirements found in the pharmaceutical,
More informationDiaphragm Valves. LD Series. Working pressures up to 300 psig (20.6 bar) Shutoff, bulk-gas distribution, and isolation service
www.swagelok.com Diaphragm Valves LD Series Working pressures up to 300 psig (20.6 bar) Shutoff, bulk-gas distribution, and isolation service Cast, forged, and bar stock stainless steel body material 1/4
More informationANALYTICAL RESULTS. PWS ID/Name: ROCKHOUSE MOUNTAIN - CONWAY Report Date: 03/29/2016
10014605 Analyzing Lab: 1012-EASTERN ANALYTICAL INC ANTIMONY, TOTAL ND MG/L.001 1 03/18/2016 ARSENIC, TOTAL 0.002 MG/L.001 1 03/18/2016 BARIUM, TOTAL 0.005 MG/L.001 1 03/18/2016 BERYLLIUM, TOTAL ND MG/L.001
More informationUltra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi
Ultra High Valves, Fittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability,
More informationFittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products ISO onversion Fittings Visual Index ISO Fitting Nomenclature page 122 Typical Fastening s page 123 Forms
More information2200 North Main Street Washington, PA PH: FX:
2200 North Main Street 2200 North Main Street KVAB SERIES MEDICAL VALVES All valves MRI compatible - approved to 3 Tesla. Nominal stroke is 1.5 turns. Full flow at ⅓ turn. Strong, durable body is made
More informationIntegral-Bonnet Needle Valves
Integral-Bonnet Needle Valves 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000 psig (413 bar) Temperatures up to 600 F (315 C) Integral-Bonnet Needle Valves
More informationPipe Fittings 1/16 to 1 in. sizes 316 stainless steel, brass, and carbon steel NPT, ISO/BSP, and SAE threads
www.swagelok.com Pipe Fittings 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Pipe Fittings Contents Nipples Page 4 dapters, Gaskets Page 6 Reducing ushings, Reducers
More information& & & & & mechanical integrity
$ $! $! mechanical integrity ( $ ( $ $! 8.3( + ( ( 3 ( ( $ (mitigation or mitigation! system!, American Society of Mechanical Engineers ASME Chemical AbstractService number National Fire Protection Association
More informationBA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends
BA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends 3-Piece, Full-Port, Bronze Ball Valve Extended-Tube Ends Ideal for use in medical gas systems, pharmaceutical
More information