Full Port Swing Check Valves Class: Sizes: Piston Check Valves Class: Sizes: 2-36

Transcription

1 (281) Full Port Swing heck Valves lass: Sizes: 2-36 Piston heck Valves lass: Sizes: 2-36 Dual Plate heck Valves - Wafer & Lug Wafer Design lass: Sizes: Lug Design lass: Sizes: 2-36

2 SOUTHERN ALIFORNIA VALVE manufactures a premium array of check valves. Our products are manufactured and tested in accordance with respective API, ASME, and ANSI standards. SV Full Port Swing heck Valves prevent backflow in pipelines and are effective in both low and high flow velocity applications. The Full Port Swing hecks can be installed in horizontal or vertical, upward flow pipelines. SV Piston heck Valves are quiet operating valves that effectively prevent backflow. The flapperless design is gentle on the seat as the piston rises and lowers with increased and decreased flow rates. SV Dual Plate heck Valve design naturally reduces fluid drag allowing easy opening and fast closure with minimal hammering. Our dual plate check design weighs a fraction of the full-bodied Swing or Piston heck valves. The SV designs offers many features and options beneficial for oil, liquid gas, and liquid applications. Innovative valve solutions.

3 SV Full Port Swing, Piston & Dual Plate heck Valves [ Product Preview ] For more information call (281) or visit our Full Port Swing heck Valves - API 6D Basic Design: ANSI/ASME B16.34, conforms to API 6D Shell Wall Thickness: API 6D Face-to-Face: ANSI/ASME B16.10 Flange End Dimensions: ANSI/ASME 16.5 (2-24 ) MSS SP-44 (26 & up) Butt-Weld End Dimensions: ANSI/ASME B16.25 Inspection & Testing: API 6D Piston heck Valves - API 6D Basic Design: API 6D Shell Wall Thickness: API 6D Face-to-Face: As stated Flange End Dimensions: ANSI/ASME 16.5 Butt-Weld End Dimensions: ANSI/ASME B16.25 Inspection and Testing: API 6D Dual Plate heck Valves - Lug & Wafer Designs - API 6D Basic Design: API 6D Face-to-Face: Flanged API 6D & ANSI/ASME B16.10 Flange Dimensions: ANSI/ASME B16.5 Inspection and Testing: API 598 Note: SV reserves the right to change any technical design and dimensional data without prior notice. Please contact SV to confirm all Dimensions and Data offered in this catalog.

4 Southern alifornia Valve s product lines include commodity valves as well as specialty valves in all Sizes, Pressure lasses & Metallurgy; including arbon Steel, Stainless Steel & Exotic Alloys. The valve types include Gate, Globe, Swing heck - Bolted Bonnet & Pressure Seal Bonnet, Ball - floating, trunnion, rising stem, Thru-onduit Gate - slab and expanding, Swing heck - Full and Regular Port, Lubricated Plugs, Dual Plate hecks - wafer and lug. Southern alifornia Valve s High Quality Standards demand 100% pressure testing of every valve to insure its reliability and full customer satisfaction. At Southern alifornia Valve, we pride ourselves with high quality products in the commodity and specialty valve lines, as well as, timely deliveries, and competitive prices. ompany History Southern alifornia Valve was established in The primary focus of the ompany was to provide full inline field service for valve maintenance as well as in house valve modifications. While serving the Power Industry, Paper & Pulp, Oil & Gas, and the Petro hemical Industry; through years of dedication and commitment to quality and service, Southern alifornia Valve has become one of the largest West oast full range, field service companies, with a reputation for superior quality. In the mid 1970s, Southern alifornia Valve entered the valve manufacturing industry, primarily serving the Power Industry. Since that time, Southern alifornia Valve has expanded their products to cover a broad range of valves. Southern alifornia Valve holds the API 6A & API 6D Monogram, API Q1 Quality Management System, and ASME R stamp. The orporate office and manufacturing facility is located in Santa Fe Springs, alifornia. The Sales and Projects office is located in Santa Fe, Texas. Mission Statement Southern alifornia Valve is committed to consistently providing products that meet or exceed customer and regulatory specifications. SV aims to enhance customer satisfaction through implementing the highest levels of quality standards while assuring full conformity to those requirements.

5 Table of ontents Page Table of ontents...1 omplete Product Line...2 ertifications...3 American Petroleum Institute (API) ISO 9001:2008 anadian Registration Numbers E PED Figure Number hart... 4 & 5 Valve ID Tag & Valve Markings Identification...6 Full Port Swing heck Valves - API 6D...7 Full Port Swing heck Valve Expanded View & Bill of Materials...8 Full Port Swing heck Valves Dimensions...9 & 10 PISTON heck Valves - API 6D...11 Piston heck Valve Expanded View & Bill of Materials Piston heck Valves Dimensions & 14 DUAL PLATE heck Valves - WAFER & LUG DESIGNS...15 Dual Plate heck - Wafer Design Expanded View & Bill of Materials Dual Plate heck - Wafer Design Dimensions...17, 18, 19 & 20 Dual Plate heck - Lug Design Dimensions...21, 22 & 23 Flange Dimensions & 27 Butt-welding Dimensions & 29 Industry Standards for Valve Manufacturing Terms and onditions

6 omplete Product Line all SV (281) for all your valve needs or visit us on the arbon & Stainless Bolted Bonnet Gates Sizes: 2-60 lass: Design: API 600 arbon Steel Bolted over Piston hecks Sizes: 1-24 lass: Design: API 6D arbon & Stainless 3-Piece Full Port Balls Sizes: 1/4-3 lass: 3705 W.O.G. Design: B16.34 arbon & Stainless Pressure Seal Gates Sizes: 2-24 lass: Design: API 600 arbon Steel Thru onduit Slab & Expanding Gates Sizes: 2-36 lass: Design: API 6D arbon & Stainless Bolted Bonnet Globes Sizes: 2-24 lass: Design: BS1873 B16.34 arbon & Stainless Pressure Seal Globes Sizes: 2-16 lass: Design: BS1873 B16.34 Dual Plate hecks Wafer & Lug Wafer Sizes: Wafer lass: Lug Sizes: 2-48 Lug lass: Design: API 594 arbon & Stainless 2-Piece Floating Balls Sizes: 1/2-12 lass: Design: B16.34 arbon & Stainless 3-Piece Trunnion Balls Sizes: 2-1/ /8 Pressure: 2000, 3000 & 5000 Design: API 6A arbon & Stainless 3-Piece Trunnion Balls Bolted & Welded Body Sizes: 2-48 lass: Design: API 6D Forged Steel Gates Sizes: 3/8-2 lass: Design: API 602 Forged Steel Globes Sizes: 3/8-2 lass: Design: API 602 Forged Steel Swing hecks Sizes: 3/8-2 lass: Design: API 602 Forged Steel Piston hecks Sizes: 3/8-2 lass: Design: API 602 arbon Steel Dual Seal Expanding Plugs Sizes: 2-24 lass: Design: API 6D arbon & Stainless Pressure Seal hecks Sizes: 2-24 lass: Design: API 600 B16.34 arbon & Stainless Bolted over Full Port Swing hecks Sizes: 2-52 lass: Design: API 6D arbon & Stainless Double Block & Bleed Trunnion Balls Sizes: 2-24 lass: Sub-Sea 3-Piece & Top Entry Trunnion Balls Bolted & Welded Body Sizes: 2-24 lass: Pressure: Design: API 6D API 6DSS arbon Steel Lubricated Plugs Sizes: 1/2-36 lass: Design: API 6D arbon & Stainless Rising Stem Balls Sizes: 2-24 lass: Design: API 6D 2

7 ertifications & Registrations American Petroleum Institute (API) Texas Facility: API 6A ertification alifornia Facility: API 6A ertification Texas Facility: API 6D ertification alifornia Facility: API 6D ertification ISO 9001:2008 ertificate European onformance Pressure Equipment Directive International Organization for Standardization (ISO) anadian Registration Number RN# O Alberta RN# O Manitoba RN# O Ontario E PED ertificate (Modified for display purposes. Actual certificates available on our web site ( 3

8 SV Figure Number hart Note: SV Figure hart is subject to change without notice Valve Type Bore Size Pressure lass Body/Bonnet Body Material Trim Material BAL = Ball.02 = 1/16.5 = 50 B = Bolted 01 = ast Iron 90 = Titanium 10 = R13 DBV = Double Ball Valve.03 = 1/8.7 = 75 H = Bar Stock 02 = A352/L 91 = Tantalum 11 = R13/HF DK = Dual Wafer heck.25 = 1/4 12 = 125 L = Lug 03 = A352/L2 96 = Zirconium 12 = R13 HF/HF DSP = Dual Seal Plug.50 = 1/2 01 = 150 N = NRS Bolted 04 = F8 13 = A105/ENP FK = Full Port heck.07 = 9/16 02 = 200 P = Pressure Seal 05 = Ductile 14 = Steel/hrome GAT = Gate.08 = 13/16 03 = 300 R = Threaded Body 06 = F8M 15 = LF2/ENP GLB = Globe.75 = 3/4 04 = 400 S = Seal Weld 08 = A216 W 16 = 416 PK = Piston heck 01 = 1 06 = 600 T = Top Entry 09 = W9/F22 17 = 17 4-PH PLG = Plug 1.2 = 1-1/16 08 = 800 U = Union 10 = A216 WB 18 = LF3+ENP RSB = Rising Stem Ball 1.3 = 1-1/8 09 = 900 W = Wafer 11 = A352 LB 20 = Alloy 20 SK = Swing heck 1.4 = 1-1/4 11= 1000 Y = Y-Pattern 12 = A350 LF2 21 = Alloy 20/HF TG = Thru onduit Gate 1.5 = 1-1/2 15 = = A = F-22 TK = Tilting Disc heck 1.8 = 1-13/16 17 = = L3/LF3 25 = Inconel Overlay WK = Wafer heck 02 = 2 20 = = A = Sanicro = 2-1/16 25 = = W6/F11 30 = = 2-1/8 30 = = 17-4 PH 31 = = 2-1/2 37 = = A = 316L 2.7 = 2-9/16 45 = = LF4 33 = 304/HF 03 = 3 50 = = Alloy = = = = LF6 35 = 316/HF 04 = 4 10 = = F = = 4-1/16 05 = = 254 SMO 37 = 317/HF 05 = = F5 38 = = = F91 39 = = = 12A 41 = 410/F6a 10 = = Sanicro = Full Teflon 12 = = 12/F9 44 = F44 Duplex 14 = = AISI = = = = 347/HF 18 = = 321L 49 = arpenter 20 = = 304L 50 = Monel 22 = = = F51 Duplex 24 = = 316L 52 = Nickel Alloy 26 = = = F53 Duplex 30 = = 317L 54 = A516/ENP 32 = = = F55 Duplex 36 = = AISI = A36/ENP 40 = = 410/F6a 57 = A537/ENP 42 = = F44 Duplex 60 = Duplex 48 = = = Super Duplex 50 = = 347L 62 = Inconel = = arpenter 63 = Inconel = = Monel 69 = Naval Brass 72 = = F51 Duplex 70 = Bronze 78 = = Nickel Alloy 71 = Aluminum 72 = = F53 Duplex 78 = Inconel = = ASTM A = Alu/Brz 55 = F55 Duplex 81 = Ni Alu/Brz 56 = ASTM A36 82 = Inconel = ASTM A = Hastelloy 60 = Duplex 86 = = Super Duplex 87 = = Inconel = Titanium 63 = Inconel = Tantalum 65 = F65 92 = Inconel = Naval Brass 93 = Tungsten arbide 70 = Bronze 96 = Zirconium 71 = Aluminum 97 = Nickel Boron 78 = Inconel = Alu Bronze 81 = Ni Alu/Brz 82 = Inconel = Hastelloy B 84 = Hastelloy 86 = AISI = = A890-4A 89 = A890-5A 4

9 Ends Operation onfiguration Seal Material Seat Material Special = lamp B = Bare Stem 32 = 3 Way 2 Port 4 = 304 Ring D = Devlon By Pass F = Flat D = Dual Acting 3F = 3 Way Floater 6 = 316 Ring G = Graphite adium oat H = Hub E = Electric 3T = 3 Way Trunnion A = Aflas O-Ring K = PTFE ryogenic J = RTJ G = Gear 43 = 4 Way 3 Port B = Buna M = Metal Seated Epoxy Paint N = Nipples H = Handwheel 4F = 4 Way Floater E = EPDM N = Nylon Lip Seal M = SW x TH L = Lever 4T = 4 Way Trunnion F = Fluorosilicone O = Nova Metal Hardface O = ODD O = Oil/Gas EX = Expanding G = Grafoil P = PEEK Metal Tungsten arbide R = RF S = S/Return FF = Full Floater H = HNBR R = RPTFE Nitride S = SW Y = Hydraulic FT = Full Trunnion K = Kalrez T = Teflon Outside WT T = TH RF = Red, Floater N = Neoprene QPQ Inturnal W = WE RT = Red, Trunnion P = Polyuerethane Slam Retard A = RF x BW SJ = Steam Jacket R = NBR Stancoat B = RTJ x BW S = Silicone Sub Sea T = Teflon Teflon Lined U = Floursint Top Extension V = Viton Zinc Base Figure Number Profile bal b r l ft - H D X No. Figure Number ode Description 1 Valve Type Identifies the valve body design (gate, globe, ball, plug, etc.) 2 Bore Size Identifies nominal port size (1/4 to 78 ) 3 Pressure lass Identifies pressure classes ranging from 50 to 15,000 4 Body/Bonnet Identifies body and bonnet material configuration (bolted bonnet, pressure seal, top entry, etc.) 5 Body Material Identifies body material composition (A105, WB, Stainless Steel, F51, etc.) 6 Trim Material Identifies trim material composition (ENP, 316, F6, r13, HF, etc.) 7 Ends Identifies end connection configuration (weld end, RTJ, socket weld, hub, etc.) 8 Operation Identifies valve operation mechanism (electric, gear, hydraulic, lever, etc.) 9 onfiguration (ball & expanding gate only) Identifies valve configuration (floater, trunnion, etc.) 10 Seal Material Identifies seal material composition (Buna, EPDM, Grafoil, HNBR, Neoprene, Teflon, etc.) 11 Seat Material Identifies seat material composition (Devlon, Graphite, PTFE, Nylon, PEEK, Teflon, etc.) 12 Special Identifies special treatments or configurations (when applicable) Sample Figure Numbers & Descriptions Valve Type Sample Figure # Description Trunnion Ball bal0201b1313rlft-hd Ball Valve, 2, 150#, Bolted Bonnet, A105 Body, ENP Trim, HNBR Seals, Devlon Seats, Raised Face, Lever Operated, Full Port, Trunnion Mtd. Floating Ball bal0201b1036rlff-/t Ball Valve, 2, 150#, Bolted Bonnet, A216 WB Body, 316SS Trim, PTFE Seats, Raised Face, Lever Oper., Full Port, Floating Ball Dual Plate Wafer heck dck0406w1035r Dual Plate Wafer heck, 4, 600#, Wafer Style, A216 WB Body, 316SS/HF Trim, Raised Face Full Port Swing heck fck0409b1011j Full Port Swing heck, 4, 900#, Bolted Bonnet, A216 WB Body, r13/hf Trim, Ring Type Joint Wedge Gate gat0303p1035rh Wedge Gate, 3, 300#, Pressure Seal, WB, 316SS/HF Trim, Raised Face, Hand Wheel Operated Globe glb0803b1011rh Globe, 8, 300#, Bolted Bonnet, WB, r13/hf Trim, Raised Face, Hand Wheel Operated Swing heck sck0601b1036r Swing heck, 6, 150#, Bolted Bonnet, WB, r13/hf Trim, Raised Face Lubricated Plug plg0803b1041rl-vm Lubricated Plug Valve, 8, 300#, Bolted Bonnet, WB, 410SS Trim, Viton Seals, Hardface Seats, Raised Face, Lever Operated Dual Seal Plug dsp0803b1011rg Dual Seal Plug, 8, 300#, bolted Bonnet, WB, r13/hf Trim, Raised Face, Gear Operated Thru onduit Gate tcg0603b1036rg-vm Thru onduit Gate, 6, 300#, Bolted Bonnet, WB, 316SS Trim, Viton Seals, Hardface Seats, Raised Face, Gear Operated Expanding Gate tcg0603b1036rgex-vm Thru onduit Gate, 6, 300#, Bolted Bonnet, WB, 316SS Trim, Viton Seals, Hardface Seats, Raised Face, Gear Operated, Expanding Rising Stem Ball rsb1006b1036rgft-hr Rising Stem Ball, 10, 600#, Bolted Bonnet, WB Body, 316SS Trim, HNBR Seals, RPTFE Seats, Raised Face, Gear Operated Note: Wedge Gates, Globes, Swing hecks, Piston hecks, Wafer hecks are metal-to-metal seats as standard. 5 Note: Subject to change without notice. ontrol #: rev4

10 Valve ID Tag & Valve Markings Identification Valve ID Tag No. Figure Number ode Description 1 Serial Number Identifies certified manufacturers serial number 2 Figure Number Identifies the detailed valve configuration (valve type, bore size, pressure class, materials, etc.) 3 MOP/Max. Temp. Identifies the maximum operating pressure in PSI and maximum operating temperature in Fahrenheit 4 Size Identifies bore size 5 Pressure lass Identifies pressure classifications per API requirements 6 Body Material Identifies body metal material composition (A105, WB, F51, F8M, etc.) 7 Stem Material Identifies stem material composition (A105, 410SS, 17-4pH, etc.) 8 Ball/Disc Material Identifies ball/disc material composition (A105, 316SS, ENP, etc.) 9 Seat Material Identifies seat material composition (PEEK, Teflon, Nylon, etc.) 10 MOP/Min. Temp. Identifies the maximum operating pressure in PSI and minimum operating temperature in Fahrenheit 11 Manufacturing Date Identifies the date the valve manufacturing completion date 12 API onformance Identifies API conformance (600, 6D, 6A, etc.) 13 O Ring Identifies the O Ring material composition (Viton, Viton GLT, etc.) 14 NAE MR Identifies corrosion resistance Valve Markings No. Valve ID omponents 1 Tag 2 Brand 3 Size 4 Pressure lass 5 Body Material 6 Heat Number WB R1823 Note: SV reserves the right to modify our products for improvement without prior notice. 6

11 Full Port Swing heck Valves - API 6D lass: /Sizes: 2-36 Design and Manufacturing Standards Basic Design API 6D & ANSI B16.34 Shell Wall Thickness API 6D Face to Face Dimension ANSI/ASME B16.10 Flange End Dimension ANSI/ASME B16.5 (2 to 24 ) MSS SP-44 (26 & up) Butt-Weld End Dimension ANSI/ASME B16.25 Inspection & Testing API 6D 7

12 Full Port Swing heck Valve [ Expanded View & Bill of Materials ] Bill of Materials No. Part W L 1 Body A216 Gr W A352 L 2 over ASTM A105 A352 L 3 Seat Ring ASTM A105 LF2 4 Seat Ring Face A105 w/hf LF2/HF 5 Disc A216 Gr W A352 L 6 Disc Face Viton O-ring 7 Hinge Pin SS316 8 Hinge Pin Washer S R Plated 9 Hinge Pin Retainer S R Plated 10 Swing Arm Washer SS Swing Arm A216 Gr W A352 L 12 Disc Nut A194 Gr 2HM A194 7M 13 Disc Washer A otter Pin SS Bonnet Gasket 316/Graphite 16 Bonnet Bolt A197 Gr B7M A320 7M 17 Bonnet Nut A194 Gr 2HM A194 7M 18 Eye Bolt Steel

13 Full Port Swing heck Valve Dimensions Size: 2-36 lass: H2 H1 A - RF A - RTJ A - WE LASS 150 LASS 300 SIZE A - RF A - WE H1 H2 WGT (RF) WGT (BW) SIZE A - RF A - WE H1 H2 WGT (RF) WGT (BW) NPS DN IN MM IN MM IN 2.01 / / / / MM 51 / / / / IN MM IN MM LB MM LB KG NPS DN IN MM IN MM IN 2.01 / / / / MM 51 / / / / IN MM IN MM LB MM LB KG

14 Full Port Swing heck Valve Dimensions LASS 600 LASS 900 LASS 1500 LASS 2500 SIZE A - RF A - RTJ A - WE H1 H2 WGT (RF) WGT (BW) SIZE A - RF A - RTJ A - WE H1 H2 WGT (RF) WGT (BW) SIZE A - RF A - RTJ A - WE H1 H2 WGT (RF) WGT (BW) SIZE A - RF A - RTJ A - WE H1 H2 WGT (RF) WGT (BW) NPS DN IN MM IN MM IN MM IN 2.01 / / / MM 51 / / / IN MM IN MM LB MM LB KG NPS DN IN MM IN MM IN MM IN 2.05 / / / / / / MM 52 / / / / / / IN MM IN MM LB MM LB KG NPS DN IN MM IN MM IN MM IN 2.01 / / / / / / MM 51 / / / / / / IN MM IN MM LB MM LB KG NPS DN IN MM IN MM IN MM IN 1.65 / / / MM 42 / / / IN MM IN MM LB / / MM / / LB KG

15 Piston heck Valves - API 6D lass: /Sizes: 1-24 Design and Manufacturing Standards Basic Design API 6D Shell Wall Thickness ANSI/ASME B16.34 Face to Face Dimension As stated Flange End Dimension ANSI/ASME B16.5 Butt-Weld End Dimension ANSI/ASME B16.25 Inspection & Testing API 6D

16 Piston heck Valve [ Expanded View & Bill of Materials ] Bill of Materials No. Part W L 1 Body A216 wcc A352 L 2 over A105 A350 LF2 3 Seat Ring a105+13hf LF2+HF 4 Piston A216 W+13r LF2+R13 5 Piston Rings hromium Molybdenum i 6 Piston Liner A ENP 5140+ENP 7 Orifice arbon Steel SS 8 Ball heck SS/S SS 9 Stud A193 B7M A320 L7 10 Nut A194 2HM A194 7M 11 Spring 304 SS 304 SS 12 Vent A SS 13 Eye Bolt Steel * All piston check valves 2 thru 6, in all pressures, comes standard with a 304ss spring installed. Note: Available in other materials upon request

17 Piston heck Valve Dimensions Size: 2-36 lass: H2 H1 A - RF A - RTJ A - WE LASS 150 LASS 300 SIZE A - RF H1 H2 WGT (RF) SIZE A - RF H1 H2 WGT (RF) NPS DN IN MM IN / / / MM / / / IN / / / MM / / / LB / / / MM / / / NPS DN IN MM IN MM IN MM LB MM

18 Piston heck Valve Dimensions LASS 600 LASS 900 LASS 1500 LASS 2500 SIZE A - RF A - RTJ H1 H2 WGT (RF) SIZE A - RF A - RTJ H1 H2 WGT (RF) SIZE A - RF A - RTJ H1 H2 WGT (RF) SIZE A - RF A - RTJ H1 H2 WGT (RF) NPS DN IN MM IN MM IN MM IN MM LB MM NPS DN IN / / / / / MM / / / / / IN / / / / / MM / / / / / IN / / / / / MM / / / / / IN / / / / / MM / / / / / LB / / / / / MM / / / / / NPS DN IN / / MM / / IN MM IN / / MM / / IN MM LB / / MM / / NPS DN IN MM IN MM IN MM IN MM LB MM

19 Basic Design Dual Plate heck Valves - Wafer & Lug Wafer Design lass: /Sizes: Lug Design lass: /Sizes: 2-36 Design and Manufacturing Standards API 6D Face to Face Dimension API 6D & ANSI/ASME B16.10 Flange End Dimension ANSI/ASME B16.5 Inspection & Testing API 598

20 Dual Plate heck Valve - Wafer Design [ Expanded View & Bill of Materials ] Bill of Materials No. Part WB F8M 1 Body A216-WB A351-F8M 2 Disc F8M A351-F8M 3 Spring Inconel X750 4 Seat Stellite 6 5 Hinge Pin 316 SS 6 Stop 316 SS 7 Thrust Washer 316 SS 8 Hinge Pin Guide Support arbon Steel 316 SS 9 Retainer arbon Steel 316 SS 10 Set Screw arbon Steel 316 SS 11 Eye Bolt arbon Steel

21 Dual Plate heck Valve - Wafer Design Dimensions Size: 2-84 lass: B E A SIZE 1.5 nps (40 DN) 2 (50 DN) 2.5 (65 DN) 3 (80 DN) 4 (100 DN) 5 (125 DN) 6 (150 DN) LASS END FAING A B BORE E STUD SELETION APPROX WT NO DIA LENGTH LB KG 150 RF RF/RJ RF/RJ RF RF/RJ RF/RJ RF/RJ RF/RJ RF/RJ RF RF RF RF RF RF/RJ RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF/RJ RF/RJ RF RF RF RF RF/RJ RF/RJ RF/RJ RF/RJ

22 Dual Plate heck Valve - Wafer Design Dimensions Size: 2-84 lass: B E A SIZE 8 (200 DN) 10 (250 DN) 12 (300 DN) 14 (350 DN) 16 (400 DN) 18 (450 DN) PRESSURE RATING END FAING A B BORE STUD SELETION APPROX WT E NO DIA LENGTH LB KG 150 RF RF RF/RJ RF/RJ RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF/RJ RF/RJ RF RF RF/RJ RJ/RJ RF/RJ RF RF RF/RJ RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF/RJ

23 Dual Plate heck Valve - Wafer Design Dimensions Size: 2-84 lass: B E A SIZE 20 (500 DN) 24 (600 DN) 26 (600 DN) 28 (700 DN) 30 (750 DN) 32 (800 DN) 36 (900 DN) LASS END FAING A B BORE STUD SELETION APPROX WT E NO DIA LENGTH LB KG 150 RF RF RF/RJ RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF RF RF/RJ RF/RJ

24 Dual Plate heck Valve - Wafer Design Dimensions Size: 2-84 lass: B E A SIZE 40 (1000 DN) 42 (1050 DN) 48 (1200 DN) 54 (1400 DN) 60 (1500 DN) 66 (1650 DN) 72 (1800 DN) 78 (1950 DN) 84 (2100 DN) LASS END FAING A B BORE STUD SELETION APPROX WT E NO DIA LENGTH LB KG 150 RF RF RF RF RF RF RF RF RF RF RF RF RF RF RF RF RF RF RF

25 Dual Plate heck Valve - Lug Design Dimensions Size: 2-36 lass: B E A SIZE LASS A B 2 (50 DN) 2.5 (65 DN) 3 (80 DN) 4 (100 DN) 5 (125 DN) 6 (150 DN) 8 ( 200 DN) 10 (250 DN) BORE E STUD SELETION APPROX WT NO DIA LENGTH LB KG

26 Dual Plate heck Valve - Lug Design Dimensions Size: 2-36 lass: B E A SIZE LASS A B 12 (300 DN) 14 (350 DN) 16 (400 DN) 18 (450 DN) 20 (500 DN) 24 (600 DN) 26 (650 DN) BORE E STUD SELETION APPROX WT NO DIA LENGTH LB KG

27 Dual Plate heck Valve - Lug Design Dimensions Size: 2-36 lass: B E SIZE LASS A B 28 (700 DN) 30 (750 DN) 32 (800 DN) 36 (900 DN) A BORE STUD SELETION APPROX WEIGHT E NO. DIAMETER LENGTH LB KG t t 23

28 SV can calm your worries in any project storm. Harness the power of quality and fast deliveries from our $45 million ready-to-ship inventory. SOUTHERN ALIFORNIA VALVE manufactures some of the most dependable cast steel Thru onduit Slab and Expanding Gate Valves in the industry. Both designs utilize flanged and butt-weld end connections, and are manufactured and tested in accordance with API 6D. The full port bi-directional flow capability minimizes pressure drop and turbulence. The SV design offers many features and options beneficial for oil, gas, and liquid applications making it one of the most demanded Thru onduit Gate valves on the market. SV also offers a complete line of gates, globes, checks, balls, plugs, and sub-sea designs in all sizes, pressure classes, and metallurgical compositions. SV valves are built to meet and exceed the most rigorous quality and production standards. SV operates under the API Q1 Quality Management System and holds API 6A, API 6D, ISO: 9001:2008, E-PED, and RN certifications. For more than 40 years, SV has served industries including the power, paper and pulp, oil and gas, transmission, and petrochemical sectors. We pride ourselves on our high quality products, timely delivery capabilities, and competitive prices

29 Superior Performance Plug Valves Available Sizes: 2 thru 36 lass: 150 thru 2500 Stocking Sizes: 2 thru 16 lass: 150 thru 2500 Southern alifornia Valve Pressure Balanced, Lubricated Plug Valves are ideal for the following applications: Oil & Gas Distribution, Processing, & Transmission Wastewater ollection & Treatment rude Handling & Treatment Petro hemical & Refineries Waste Transfer & Processing Slurry Transfer & Processing Steam Systems General Industries API 6D Pressure Balanced Lubricated Metal-to-Metal Seal API 6FA Firesafe Design 410SS Trim NAE MR SV is ertified: API 6A, API 6D, E PED, RN (Alberta, Manitoba, & Ontario) Phone:

30 Flange Dimensions - ANSI B16.5 & B16.47 T L r F R O P K O Groove Detail lass Flg. Dia. Flg. Thick. Raised Face Dia. Drilling Face Dia. Ring Joint Size Bolt Pitch Grv. Grv. Btm. Ircle Dia. # of Hole Dia. Depth Width Radius Ring Bolts Dia. No. O T R K P L F r R R R R R R R R R R R R / / / / / / R / R / R / R / R / R / R R R R R R R R R R R R R R R R R R R R R98 26

31 Flange Dimensions - ANSI B16.5 & B16.47 T L r F R O P K O Groove Detail lass Flg. Dia. Flg. Thick. ircle Raise Drilling 27 Face Dia. Ring Joint Size Bolt Pitch Grv. Grv. Btm. Ircle Dia. # of Hole Dia. Depth Width Radius Ring Bolts Dia. No. O T R K P L F r R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R60

32 Butt-welding Dimensions - ANSI B16.25 Nominal Pipe Size Schedule Number or Wall Outside Diameter (ast Steel Valves) A Nominal Inside Diameter B 28 Machined Inside Diameter Nominal Wall Thickness t Inches mm Inches mm Inches mm Inches mm 3 xxs 3-19/ xxs 4-5/ / xxs / xxs / xxs / / / / / / /