Clay drainage. Trade Price List March 1 st 2018

Transcription

1 Clay drainage Trade Price List March 1 st 2018

2 Contents Introduction to Hepworth Clay 2 Premier and Premier Plus Stock Profile 4 SuperSleve HouseDrain Premier Plus Stock Profile 5 SuperSleve SuperSleve Suggested Clay Civils Stock Profile 6 SuperSleve Socketed Clay Channels Gullies 7 Clayware Accessories 7 Universals 100 and SuperSleve HouseDrain Diameter Pipes and Fittings Diameter Connectors and Adaptors PP Diameter Access Fittings 14 SuperSleve Diameter Pipes and Fittings Diameter Fittings and Adaptors PP 17 SuperSleve Diameter Pipes and Fittings SuperSleve Diameter Pipes and Fittings Channels to 300 Channels and Fittings 23 Plain Ended Channel Pipes and Fittings 24 Socketed Channel Pipes and Fittings 25 Socketed Channel Bends 26 Socketed Channel Junctions 27 Socketed Channel Junctions and Bends 28 Socketed Branch Channel Bends 29 Gullies Gullies and Fittings Gullies and Traps 32 Metalwork Grids and Cover Plates 33 Cover Plates 34 HepGuard 35 Stop Tap Guards 35 HepLine 36 Land Drainage 36 Page Page Unjointed to 300 Pipes and Fittings 37 Clayware Accessories 38 Cutters, Stoppers and Lubricant 38 Universal Access Systems Access Chambers 39 Inspection Chambers Range Range Inspection Chambers Ancillaries 46 Full and Part Pack Quantities Pipes and Couplings 47 Pipes and Fittings, Inspection Chambers and Channel Pipes 48 Mechanical Off-Loading 49 Guide to Good Drainage Ordering 49 Acceptance 50 Numerical Index Notes 55 Important Notes 56 Quality Assurance 56 Contact 56 1

3 Introduction to Hepworth Clay Introduction to Hepworth Clay Vitrified clay is a well-established material for use in below-ground drainage systems. The inherent strength and durability of clay provide benefits to installers, specifiers and users: Installation Reduced, recycled or re-used material can be used instead of primary aggregates, lowering total installation costs. This is achieved by reducing material costs and transport costs of both aggregate to site and trench material from site. The amount of as-dug material used will depend on site ground conditions, but the more used, the greater the saving and the lower the environmental impact too. In use A Hepworth Clay Drainage system will withstand high water pressure jetting see overleaf for details so that more blockages are cleared first time. Clay pipes are chemically inert and are unaffected by any effluent acceptable in an adopted sewer or by virtually all aggressive ground conditions, making it a perfect material for brownfield situations. A choice of sealing rings is available. Clay pipes have a life expectancy of over 100 years. Hepworth is the No. 1 clay drainage brand in the UK, with a reputation second to ne for product quality, technical ability and customer service. The Hepworth range is comprehensive, offering a complete system for a wide range of applications. Product photos are for example only and t representative of every fitting size. Scan this QR code with your smartphone to visit the website drainage@hepworth.co.uk Web: 2

4 Key to abbreviations Kitemark Lifetime Jetting Guarantee CE Mark Important Notes Products marked with a Kitemark have been tested and awarded the Kitemark. Please refer to page 50 for Acceptance information. Lifetime Jetting Guarantee The drainage products* identified in this price list are guaranteed for the system lifetime against penetration of the pipe wall caused by the following jetting criteria: High pressure water jet used at a pressure of up to 7,500 psi (517 bar). At a flow rate t exceeding 20 gallons per minute (1.5 litres per second). Held iobile for a constant period of t more than 5 minutes. * When laid in accordance with our instructions and the requirements of the codes of practice and guides relevant to their use. 3

5 Premier and Premier Plus Stock Profile SuperSleve HouseDrain 100 Target market and primary users small, medium and general builder. Application plain ended system with push-fit flexible couplings for use in housing, coercial, industrial and road drainage. General coents profile sufficient for 2 or 3 plots of domestic drainage for typical 3 bed detached houses and adoptable drainage. Stock profile quantity List price Total price SP1 Pipe 100 x 1.6m SC1/1 Coupling SBR1 Rest Bend Plain Ended SB1/1 90 Bend Plain Ended SB2/1 45 Bend Plain Ended SB3/1 30 Bend Plain Ended SB4/1 15 Bend Plain Ended SJ1/1 45 Oblique Junction Plain Ended SJ2/1 90 Curved Square Junction PE SDT2/1 Taper Pipe Single Socket SG1/1 Low Back P-Trap Plain Ended IG2 Grid Alloy SH3/1 Hopper Rectangular SDG2/1 Paved Area Gully SG2/1 Square Gully SDG3/1 Inlet Gully SG3/1 Access Gully c/w Grid SJS1/1 Oblique Saddle Small SJS4/1 Square Saddle Small SRPS1/1 Square Top Rodding Point S/S460 Internal Drain Conn. 32/40 waste SS1/1 Stopper SA3/1 Adaptor Coupling to HepSleve SA9 SuperSleve Adaptor to soil pipe VA9 HepSleve Adaptor to soil pipe SA14/1 Adaptor to cast iron List Price Total = Page For comprehensive range, price and specification details please refer to the appropriate product section within this publication. Important Note: The above profile is available from all Premier stockists In addition, the profile on the facing page is available from our Premier Plus stockists. Please see our web site for a full list of Premier Scheme stockists. Find your nearest Hepworth Clay Premier Scheme Stockist with any web enabled device, simply type in your town or post code and press enter. 4

6 Premier Plus Stock Profile SuperSleve 150 Target market and primary users medium / general builder and civils contractor. Application plain ended system with push-fit flexible couplings for use in housing, coercial, industrial and adoptable drainage. General coents profile sufficient for a small civils project in 150 diameter. Stock profile quantity List price Total price SP2 Pipe 150 x 1.75m SC1/2 Coupling SB1/2 90 Bend Plain Ended SB2/2 45 Bend Plain Ended SB3/2 30 Bend Plain Ended SB4/2 15 Bend Plain Ended SJ1/2 45 Oblique Junc. 150x100 PE SJ1/3 45 Oblique Junc. 150x150 PE SJ2/2 90 Curved Sq. Junc. 150x100 PE SJ2/3 90 Curved Sq. Junc. 150x150 PE SJS2/2 Oblique Saddle Large PE SJS1/2 Oblique Saddle Small PE ST2/1 Taper Pipe SA21 Universal Rainwater Adaptor SA3/2 Adaptor Coupling to HepSleve SA10 SuperSleve Adaptor to soil pipe SC4/2 Sliding Coupling SRP1/2 150 Oval Rodding Point SS1/2 Stopper List Price Total = Page SuperSleve 225 Target market and primary users large builder and civils. Application plain ended system with factory fitted couplings for use in housing, coercial, industrial and adoptable drainage. General coents profile sufficient for a small civils project in 225 diameter. Stock profile quantity List price Total price SP175/4S Pipe 225 x 1.75m SP060/5S Pipe 225 x 0.6m SC1/5 Spare Couplings SB1/5S 90 Bend SB2/5S 45 Bend SB3/5S 30 Bend SB4/5S 15 Bend SJ1/7S 45 Oblique Junction 225x SJ1/8S 45 Oblique Junction 225x SJ1/9D 45 Oblique Junction 225x SJ3/8S 90 Curved Sq. Junc. 225x ST3/2 Taper Pipe List Price Total = Page 5

7 Suggested Clay Civils Stock Profile SuperSleve 300 Target market and primary users large builder and civils. Application plain ended system with factory fitted couplings for use in housing, coercial, industrial and adoptable drainage. General coents profile sufficient for a small civils project in 300 diameter. Stock profile quantity List price Total price SP7S Pipe 300 x 2.0m SP060/7S Pipe 300 x 0.6m SC1/7 Spare Couplings SB1/7S 90 Bend SB2/7S 45 Bend SB3/7S 30 Bend SB4/7S 15 Bend SJ1/14S 45 Oblique Junction 300x SJ1/15S 45 Oblique Junction 300x SJ1/17D 45 Oblique Junction 300x SJ1/19D 45 Oblique Junction 300x SJ3/15S 90 Square Junction 300x ST4/3 Taper Pipe List Price Total = Page Socketed Clay Channels Target market and primary users small / medium / general builder and civils contractor. Application socketed channel system for use in manholes on coercial, industrial and adoptable drainage including gullies. General coents profile sufficient for a small civils project in 100, 150, 225 diameters. 6 Stock profile quantity List price Total price 100 Socketed Channels CP2/1 Channel Pipe 100 x 0.6m CP3/1 Channel Pipe 100 x 1.0m CB3/1L 30 Bend Left Hand CB3/1R 30 Bend Right Hand CB2/1L 45 Bend Left Hand CB2/1R 45 Bend Right Hand CJ1/1L 45 Oblique Junction Left Hand CJ1/1R 45 Oblique Junction Right Hand Socketed Channels CP2/2 Channel Pipe 150 x 0.6m CP3/2 Channel Pipe 150 x 1.0m CB3/2L 30 Bend Left Hand CB3/2R 30 Bend Right Hand CB2/2L 45 Bend Left Hand CB2/2R 45 Bend Right Hand CT2/1 Enlarger 100x Socketed Channels CP3/3 Channel Pipe 225 x 1.0m CT2/2 Enlarger 150x Page

8 Suggested Clay Civils Stock Profile Gullies Stock profile quantity List price Total price 100 & 150 Gullies RGP5 225 Yard Gully 100 & L/D Grate RGP6 225 Yard Gully 100 & M/D Grate RGP7 225 Yard Gully 150 & L/D Grate RGR1 Road Gully 300x outlet RGR2 Road Gully 300x outlet RGU1 Universal Grease Trap 600x List Price Total = Page Clayware Accessories Stock profile quantity List price Total price SL1 Lubricant 1 Kilo Tub SL2 Lubricant 2.5 Kilo Tub MPC1 Lever Pipe Cutter MPC2 Lever Pipe Cutter 100/ MPT1 Pipe Trier 100/ List Price Total = Page Universals 100 and 150 Target market and primary users housebuilders and small, medium and general builder. Application an inspection chamber system for use in housing, coercial, industrial drainage. General coents profile sufficient for 2 or 3 plots of domestic drainage for typical 3 bed detached houses or small construction project. Stock profile quantity List price Total price SDAC1/1 Mini Access Chamber 3 Inlets SPIC1/1 PPIC 940 deep 5 Inlets SPIC2/1 PPIC 595 deep 5 Inlets SPIC1/2 PPIC 1030 deep mixed base SPIC4 PPIC 175 Raising Piece SPIC5 PPIC Sealing Ring SPIC6/1 PPIC Base Unit 5 Inlets SPIC6/2 PPIC Mixed Base Unit 5 Inlets SPIC7 Inlet Adaptor SPK8 Round Ductile Iron Cover + Frame SPKS8 Square Ductile Iron Cover + Frame List Price Total = Page 7

9 PG1 100 Diameter Pipes and Fittings Vitrified Clay SuperSleve HouseDrain Pipe per pipe Plain Ended 100 x 1.6m! C 100 SP Rocker 0.3m! C 100 SP030/ m! C 100 SP060/ m! C 100 SP100/ Couplings Couplings (polypropylene) With EPDM sealing rings! C 100 SC1/ With Nitrile sealing rings! C 100 SC3/ Fittings 90 Bend Single Socket! C 100 SDB1/1S Plain Ended! C 100 SB1/ Bend Single Socket! C 100 SDB2/1S Plain Ended! C 100 SB2/ Bend Single Socket! C 100 SDB3/1S Plain Ended! C 100 SB3/ Bend Single Socket! C 100 SDB4/1S Plain Ended! C 100 SB4/ Flexible Bend (0-25 ) Single Socket 100 SFB1/ Oblique Junction Double Socket 100 x 100! C 100 SDJ1/1D Plain Ended 100 x 100! C 100 SJ1/ Curved Square Junction Double Socket 100 x 100! C 100 SDJ2/1D Plain Ended 100 x 100! C 100 SJ2/

10 PG1 100 Diameter Pipes and Fittings Vitrified Clay SuperSleve HouseDrain Oblique Saddle Small for pipes up to and including 300 dia.! C 100 SJS1/ Large for pipes larger than 300 diameter! C 100 SJS2/ Square Saddle Small for pipes up to and including 300 diameter! C 100 SJS4/ Large for pipes larger than 300 diameter! C 100 SJS5/ Rest Bend Single Socket! C 100 SDBR Plain Ended! C 100 SBR Telescopic C 100 SBRT Rat Barrier C 100 RAT/FM Taper Pipe Single Socket 100 to 150! C 100 SDT2/ Socket Adaptor for connection to traditional pipes and fittings! C 100 SA1/ Traps, Gullies Low Back P-Trap Single Socketed! C 100 SDG1/ Plain Ended! C 100 SG1/

11 PG1 100 Diameter Pipes and Fittings Vitrified Clay SuperSleve HouseDrain Inlet Gully! C 100 SDG3/ Inlet Gully, with back inlet + horizontal back inlet! C 100 SDG3/ Spare Accessories Grid and vertical back inlet insert only SDG Hopper c/w grid SDG2/ Cover Plate SDG2/ Metal Grid SDG2/ Dip Tube Trap 100 SDC Paved Area Gully Supplied complete with grid and frame! C 100 SDG2/ Paved Area Gully, with back inlet Supplied complete with grid and frame + horizontal back inlet! C 100 SDG2/ Top Assembly c/w grid and frame SDG2/ Cover Plate SDG2/ Metal Grid SDG2/ Square Gully Supplied complete with grid! C 100 SG2/ Spare polypropylene grid 150 x SG2/ Square Gully, with back inlet Supplied complete with grid! C 100 SG2/ Spare polypropylene grid 150 x SG2/

12 PG1 100 Diameter Pipes and Fittings Vitrified Clay SuperSleve HouseDrain Suitable alternative grids Grid, alloy 150 x IG2* 9.61 Hinged grating + frame 150 x IH2* Cover plate + frame, 150 x IS2* Spare stopper for SG2/1 + SG2/ Square Raising Piece for SG2/1, SH1, SH2 75 x 150 x 150! 150 RRS2/1* x 150 x 150! 150 RRS2/2* x 150 x 150! 150 RRS2/3* x 150 x 150! 150 RRS2/4* Access Gully c/w grid! C 100 SG3/ Access Gully c/w grid and horizontal back inlet! C 100 SG4/ Note: Can accept 110 round or 100x100 square rainwater pipes Spare Accessories Grid 120 x IG1P Bridge 120 x QB Cover Plate 120 x IS1* Hinge Grating 120 x IH1* Access Raising Piece for SG3/1 + SH3/1 Height Height 75! 75 SRP Height 150! 150 SRP Height 225! 225 SRP Height 300! 300 SRP * PG2 discount applies 11

13 PG1 100 Diameter Pipes and Fittings Vitrified Clay SuperSleve HouseDrain Hopper, Rectangular! C 100 SH3/ spares Grid 120 x 120 IG1P Bridge 120 x 270 QB Cover Plate + Frame IS1* Hinged Grating + Frame IH1* Hopper, Square! C 100 SH Grid, alloy 150 x IG2* 9.61 Cover Plate, alloy 150 x IS2* Hopper, Square, with 100 horizontal inlet! C 100 SH Grid, alloy 150 x IG2* 9.61 Cover Plate, alloy 150 x IS2* Rodding Points Square Top Rodding Point Sealed c/w coupling 100 SRPS1/ Polypropylene. Hinged square top secures the air-tight sealing ring. Complete with fitted coupling to connect directly to SuperSleve Rodding Point Plain Ended 100 SRP1/ Rodding Point With airtight seal, plain ended 100 SRP2/ * PG2 discount applies 12

14 PG1 100 Diameter Connectors and Adaptors PP SuperSleve HouseDrain Drain Connectors Fit Clay and Plastic Systems Internal Drain Connector To Waste 100 to 32/40 Waste 100 S/S to 50 Waste 100 S/S Internal Blanking Plug S/S Internal Drain Connector 100 to 68 Round Rainwater 100 S/4A06B to 65 Square Rainwater 100 S/4A06C Internal Drain Connector 100 to Soil Stacks 100 S/S Adaptors Adaptor Coupling to HepSleve 100 SA3/ (Other HepSleve adaptors available on request) Adaptors to 110 ø soil pipes SuperSleve 110 SA HepSleve 110 VA Rainwater Adaptor to round or square rainwater pipes up to SA Sliding Coupling 100 SC4/ Adaptor to Cast Iron Pipes made to BS SA14/ Double Spigot Adaptor 110 OsmaDrain/100 SuperSleve 100 SA15/ Stopper 100 SS1/ Testing Stopper with integral nipple 100 SS2/

15 PG1 100 Diameter Access Fittings Vitrified Clay 100 Diameter Access Fittings SuperSleve HouseDrain Access Fittings Access Pipe! C 100 SPA Access Bend! C 100 SBA Single Oblique Access Junction Left-hand! C 100 SJA1L Single Oblique Access Junction Right-hand! C 100 SJA1R Access Raising Piece Height Height 75! 75 SRP Height 150! 150 SRP Height 225! 225 SRP Height 300! 300 SRP Alloy Lid and Frame Pedestrian areas only 300 x 150 IS

16 PG2 150 Diameter Pipes and Fittings Vitrified Clay SuperSleve 150 Pipe per pipe Plain Ended 150 x 1.75m! C 150 SP Rocker 0.3m! C 150 SP030/ m! C 150 SP060/ m! C 150 SP100/ Couplings Coupling (polypropylene) With EPDM sealing rings! C 150 SC1/ With nitrile sealing rings! C 150 SC3/ Fittings 90 Bend! C 150 SB1/ Bend! C 150 SB2/ Bend! C 150 SB3/ Bend! C 150 SB4/ º Oblique Junction 150 x 100! C 150 SJ1/ x 150! C 150 SJ1/ º Curved Square Junction 150 x 100! C 150 SJ2/ x 150! C 150 SJ2/ Oblique Saddle Small for pipes up to and including 300 diameter! C 150 SJS1/ Large for pipes larger than 300 diameter! C 150 SJS2/ Square Saddle Small for pipes up to and including 300 diameter! C 150 SJS4/ Large for pipes larger than 300 diameter! C 150 SJS5/

17 PG2 150 Diameter Fittings Vitrified Clay SuperSleve 150 Taper Pipe 100 to 150! C 100 ST2/ to 225! C 150 ST3/ Rest Bend! C 150 SBR Telescopic Rest Bend C 150 SBRT Socket Adaptor for connection to traditional pipes and fittings! C 150 SA1/ Low-back P-trap! C 150 SG1/ Hopper integral inlet complete with plastic grid! C 150 SH3/ Spares Grid 120 x 120 IG1P* Bridge 175 x 375 QB2* Rodding Point oval (aluminium) 150 SRP1/ Access Fittings Access Pipe! C 150 SPA Access Bend! C 150 SBA Single Oblique Access Junction left hand 150 x 100! C 150 SJA2L x 150! C 150 SJA3L

18 PG2 150 Diameter Fittings and Adaptors PP SuperSleve Single Oblique Access Junction right hand 150 x 100! C 150 SJA2R x 150! C 150 SJA3R Access Raising Piece Height Height 75! 75 SRP1* Height 150! 150 SRP2* Height 225! 225 SRP3* Height 300! 300 SRP4* Alloy Lid and Frame Pedestrian areas only 300 x 150 IS0* Adaptors Rainwater Adaptor to round or square rainwater pipes up to 100 x SA Adaptor Coupling to HepSleve 150 SA3/ Adaptors to 160 ø PVCu soil pipes SuperSleve 150 SA HepSleve 150 VA Double Spigot Adaptor 160 OsmaDrain/150 SuperSleve 150 SA15/ Sliding Coupling 150 SC4/ Adaptor to Cast Iron 150 SA14/ Pipes made to BS 437 Stopper 150 SS1/ Testing Stopper with integral nipple 150 SS2/ * PG1 discount applies 17

19 PG2 225 Diameter Pipes and Fittings Vitrified Clay SuperSleve 225 Pipe Full Length Pipe complete with Fitted EPDM Coupling 225 x 1.75m per pipe! C 225 SP175/4S Pipe Plain Ended for use with separate nitrile couplings 225 x 1.75m per pipe! C 225 SP175/ Rocker 0.3m! C 225 SP030/ m! C 225 SP060/ m! C 225 SP100/ Short Length 0.3m! C 225 SP030/5S m! C 225 SP060/5S m! C 225 SP100/5S Couplings Spare couplings (polypropylene) with EPDM sealing rings! C 225 SC1/ with nitrile sealing rings! * C 225 SC3/ Fittings 90 Bend Single Socket! C 225 SB1/5S Plain Ended! * C 225 SB1/ Bend Single Socket! C 225 SB2/5S Plain Ended! * C 225 SB2/ Bend Single Socket! C 225 SB3/5S Plain Ended! * C 225 SB3/ Bend Single Socket! C 225 SB4/5S Plain Ended! * C 225 SB4/

20 PG2 225 Diameter Fittings Vitrified Clay SuperSleve Oblique Junction Coupling on Barrel 225 x 100! C 225 SJ1/7S Plain Ended 225 x 100! * C 225 SJ1/ Coupling on Barrel 225 x 150! C 225 SJ1/8S Plain Ended 225 x 150! * C 225 SJ1/ Coupling on Barrel and Arm 225 x 225! C 225 SJ1/9D Plain Ended 225 x 225! * C 225 SJ1/ Square Junction Coupling on Barrel 225 x 100! C 225 SJ3/7S Plain Ended 225 x 100! * C 225 SJ3/ Coupling on Barrel 225 x 150! C 225 SJ3/8S Plain Ended 225 x 150! * C 225 SJ3/ Coupling on Barrel & Arm 225 x 225! C 225 SJ2/9D Plain Ended 225 x 225! * C 225 SJ2/ Oblique Saddle! C 225 SJS2/ Square Saddle! C 225 SJS5/ Rest Bend Single Socket! C 225 SBR5S Plain Ended! * C 225 SBR Taper Pipe 150 x 225! C 225 ST3/ Stopper! C 225 SS3/ Socket Adaptor for connection to traditional pipes and fittings! C 225 SA1/ * Plain ended bends and junctions are for use with separate couplings fitted with Nitrile sealing rings for increased resistance to hydrocarbons. Contact the Technical Advisory Service for further details. 19

21 PG2 300 Diameter Pipes and Fittings Vitrified Clay SuperSleve 300 Pipe Full Length Pipe complete with Fitted EPDM Coupling 300 x 2.0m! C Pipe - Plain Ended for use with separate nitrile couplings 300 x 2.0m! C per pipe 300 SP7S per pipe 300 SP Rocker 0.3m! C 300 SP030/ m! C 300 SP060/ m! C 300 SP100/ Short Length 0.3m! C 300 SP030/7S m! C 300 SP060/7S m! C 300 SP100/7S Couplings Spare couplings (polypropylene) with EPDM sealing rings! C 300 SC1/ with nitrile sealing rings! * C 300 SC3/ Fittings 90 Bend Single Socket! C 300 SB1/7S Plain Ended! * C 300 SB1/ Bend Single Socket! C 300 SB2/7S Plain Ended! * C 300 SB2/ Bend Single Socket! C 300 SB3/7S Plain Ended! * C 300 SB3/ Bend Single Socket! C 300 SB4/7S Plain Ended! * C 300 SB4/

22 PG2 300 Diameter Fittings Vitrified Clay SuperSleve Oblique Junction Coupling on Barrel 300 x 100! C 300 SJ1/14S Plain Ended 300 x 100! * C 300 SJ1/ Coupling on Barrel 300 x 150! C 300 SJ1/15S Plain Ended 300 x 150! * C 300 SJ1/ Coupling on Barrel and Arm 300 x 225! C 300 SJ1/17D Plain Ended 300 x 225! * C 300 SJ1/ Coupling on Barrel and Arm 300 x 300! C 300 SJ1/19D Plain Ended 300 x 300! * C 300 SJ1/ Square Junction Coupling on Barrel 300 x 100! C 300 SJ3/14S Plain Ended 300 x 100! * C 300 SJ3/ Coupling on Barrel 300 x 150! C 300 SJ3/15S Plain Ended 300 x 150! * C 300 SJ3/ Coupling on Barrel and Arm 300 x 225! C 300 SJ3/17D Plain Ended 300 x 225! * C 300 SJ3/ Coupling on Barrel and Arm 300 x 300! C 300 SJ3/19D Plain Ended 300 x 300! * C 300 SJ3/ Oblique Saddle! C 300 SJS2/ Square Saddle! C 300 SJS5/ Rest Bend Single Socket! C 300 SBR7S Plain Ended! * C 300 SBR * Plain ended bends and junctions are for use with separate couplings fitted with nitrile sealing rings for increased resistance to hydrocarbons. Contact the Technical Advisory Service for further details. 21

23 PG2 300 Diameter Pipes and Fittings Vitrified Clay SuperSleve 300 Taper Pipe to 225 SuperSleve 225 x 300! C 300 ST4/ Stopper! C 300 SS3/ Socket Adaptor for connection to traditional pipes and fittings! C 300 SA1/

24 PG2 100 to 300 Channels and Fittings Vitrified Clay Channels Direction of flow is from the socket towards the spigot. Important te: Handing of channel and access fittings is as viewed against direction of flow. 23

25 PG2 Plain Ended Channel Pipes and Fittings Vitrified Clay Channels Channel Pipe Plain Ended Pipe 0.3m 100 CPP1/ m 100 CPP2/ m 100 CPP3/ m 150 CPP1/ m 150 CPP2/ m 150 CPP3/ m 225 CPP3/ m 300 CPP3/ Pipe large diameter 1.0m 400 CPP3/ m 450 CPP3/ Channel Fittings Plain Ended Enlarger/Reducer 100 x CTP1/ x VCTP4/ x CTP1/ Bend 100 CBP1/ Plain ended channel bends 150 CBP1/ can be used left or right handed 225 VCB1/ VCB1/ Bend 100 CBP2/ CBP2/ VCB2/ VCB2/ Bend 100 CBP3/ CBP3/ VCB3/ VCB3/ Bend 100 CBP4/ CBP4/ VCB4/ VCB4/ Oblique Junction left-hand 100 x CJP1/1L x CJP1/2L x CJP1/3L right-hand 100 x CJP1/1R x CJP1/2R x CJP1/3R Curved Square Junction left-hand 100 x CJP2/1L x CJP2/2L x CJP2/3L

26 PG2 Socketed Channel Pipes and Fittings Vitrified Clay Channels Curved Square Junction right-hand 100 x CJP2/1R x CJP2/2R x CJP2/3R Channel Pipe Socketed Pipe 0.3m 100 CP1/ m 150 CP1/ m 225 CP1/ m 300 CP1/ m 100 CP2/ m 150 CP2/ m 225 CP2/ m 300 CP2/ m 100 CP3/ m 150 CP3/ m 225 CP3/ m 300 CP3/ Channel Fittings Socketed Enlarger 100 x CT2/ x CT2/ x CT2/ Reducer 150 x CT1/ x CT1/ x CT1/ Channel Bends Socketed 90 Bend medium left-hand right-hand Left-hand 100 CB1/1L Right-hand 100 CB1/1R Left-hand 150 CB1/2L Right-hand 150 CB1/2R Left-hand 225 CB1/3L Right-hand 225 CB1/3R Left-hand 300 CB1/4L Right-hand 300 CB1/4R Bend medium left-hand right-hand Left-hand 100 CB2/1L Right-hand 100 CB2/1R Left-hand 150 CB2/2L Right-hand 150 CB2/2R Left-hand 225 CB2/3L Right-hand 225 CB2/3R Left-hand 300 CB2/4L Right-hand 300 CB2/4R

27 PG2 Socketed Channel Bends Vitrified Clay Socketed Channel Bends Channels Bend medium left-hand right-hand Left-hand 100 CB3/1L Right-hand 100 CB3/1R Left-hand 150 CB3/2L Right-hand 150 CB3/2R Left-hand 225 CB3/3L Right-hand 225 CB3/3R Left-hand 300 CB3/4L Right-hand 300 CB3/4R Bend medium left-hand right-hand Left-hand 100 CB4/1L Right-hand 100 CB4/1R Left-hand 150 CB4/2L Right-hand 150 CB4/2R Left-hand 225 CB4/3L Right-hand 225 CB4/3R Left-hand 300 CB4/4L Right-hand 300 CB4/4R Enlarger left-hand right-hand Left-hand 100 x CBT2/1L Left-hand 100 x CBT2/1R Left-hand 150 x CBT2/2L Right-hand 150 x CBT2/2R Left-hand 225 x CBT2/3L Right-hand 225 x CBT2/3R Reducer left-hand right-hand Price is based on larger diameter Left-hand 225 x CBT1/2L Right-hand 225 x CBT1/2R Channel Junctions Socketed 90 Square Junction left-hand right-hand Left-hand 100 x CJ2/1L Right-hand 100 x CJ2/1R Left-hand 150 x CJ2/2L Right-hand 150 x CJ2/2R Left-hand 150 x CJ2/3L Right-hand 150 x CJ2/3R Left-hand 225 x CJ2/4L Right-hand 225 x CJ2/4R Left-hand 225 x CJ2/5L Right-hand 225 x CJ2/5R Left-hand 225 x CJ2/6L Right-hand 225 x CJ2/6R Left-hand 300 x CJ2/8L Right-hand 300 x CJ2/8R Left-hand 300 x CJ2/9L Right-hand 300 x CJ2/9R Left-hand 300 x CJ2/10L Right-hand 300 x CJ2/10R

28 PG2 Socketed Channel Junctions Vitrified Clay Socketed Channel Junctions Channels 45 Oblique Junction left-hand right-hand Left-hand 100 x CJ1/1L Right-hand 100 x CJ1/1R Left-hand 150 x CJ1/2L Right-hand 150 x CJ1/2R Left-hand 150 x CJ1/3L Right-hand 150 x CJ1/3R Left-hand 225 x CJ1/4L Right-hand 225 x CJ1/4R Left-hand 225 x CJ1/5L Right-hand 225 x CJ1/5R Left-hand 225 x CJ1/6L Right-hand 225 x CJ1/6R Left-hand 300 x CJ1/8L Right-hand 300 x CJ1/8R Left-hand 300 x CJ1/9L Right-hand 300 x CJ1/9R Left-hand 300 x CJ1/10L Right-hand 300 x CJ1/10R Double Oblique Junction 100 x CJ3/ x CJ3/ x CJ3/ x CJ3/ x CJ3/ x CJ3/ x CJ3/ Double Square Junction 100 x CJ4/ x CJ4/ x CJ4/ x CJ4/ x CJ4/ x CJ4/ Breeches Oblique Junction 100 x CJ5/ x CJ5/ x CJ5/ x CJ5/ x CJ5/ x CJ5/ x CJ5/ Breeches Square Junction 100 x CJ6/ x CJ6/ x CJ6/ x CJ6/ x CJ6/ x CJ6/

29 PG2 Socketed Channel Junctions and Bends Vitrified Clay Channels Branch Channel Bends Socketed Half-section 10 left-hand 10 right-hand Left-hand 100 CX1/1L Right-hand 100 CX1/1R Left-hand 150 CX2/1L Right-hand 150 CX2/1R left-hand 30 right-hand Left-hand 100 CX1/2L Right-hand 100 CX1/2R Left-hand 150 CX2/2L Right-hand 150 CX2/2R left-hand 50 right-hand Left-hand 100 CX1/3L Right-hand 100 CX1/3R Left-hand 150 CX2/3L Right-hand 150 CX2/3R left-hand 70 right-hand Left-hand 100 CX1/4L Right-hand 100 CX1/4R Left-hand 150 CX2/4L Right-hand 150 CX2/4R left-hand 90 right-hand Left-hand 100 CX1/5L Right-hand 100 CX1/5R Left-hand 150 CX2/5L Right-hand 150 CX2/5R left-hand 115 right-hand Left-hand 100 CX1/6L Right-hand 100 CX1/6R Left-hand 150 CX2/6L Right-hand 150 CX2/6R left-hand 140 right-hand Left-hand 100 CX1/7L Right-hand 100 CX1/7R Left-hand 150 CX2/7L Right-hand 150 CX2/7R left-hand 165 right-hand Left-hand 100 CX1/8L Right-hand 100 CX1/8R Left-hand 150 CX2/8L Right-hand 150 CX2/8R

30 PG2 Socketed Branch Channel Bends Vitrified Clay Socketed Branch Channel Bends Channels Three-quarter-section 10 left-hand 10 right-hand Left-hand 100 CX1AL Right-hand 100 CX1AR Left-hand 150 CX2AL Right-hand 150 CX2AR left-hand 30 right-hand Left-hand 100 CX1BL Right-hand 100 CX1BR Left-hand 150 CX2BL Right-hand 150 CX2BR left-hand 50 right-hand Left-hand 100 CX1CL Right-hand 100 CX1CR Left-hand 150 CX2CL Right-hand 150 CX2CR left-hand 70 right-hand Left-hand 100 CX1DL Right-hand 100 CX1DR Left-hand 150 CX2DL Right-hand 150 CX2DR left-hand 90 right-hand Left-hand 100 CX1EL Right-hand 100 CX1ER Left-hand 150 CX2EL Right-hand 150 CX2ER left-hand 115 right-hand Left-hand 100 CX1FL Right-hand 100 CX1FR Left-hand 150 CX2FL Right-hand 150 CX2FR left-hand 140 right-hand Left-hand 100 CX1GL Right-hand 100 CX1GR Left-hand 150 CX2GL Right-hand 150 CX2GR left-hand 165 right-hand Left-hand 100 CX1HL Right-hand 100 CX1HR Left-hand 150 CX2HL Right-hand 150 CX2HR

31 PG2 Gullies and Fittings Vitrified Clay Gullies and Fittings Gullies Yard Gullies Yard Gully Supplied complete with domestic duty grating and frame (up to 1 tonne) Internal Internal Back Inlet Outlet dia depth dia dia ! C 100 RGP ! C 100 RGP5B ! C 150 RGP ! C 150 RGP7B With medium duty grating and frame (up to 5 tonnes) ! C 100 RGP ! C 100 RGP6B ! C 150 RGP ! C 150 RGP8B Yard Gully Extras Raising Piece 300 Plain Raising Piece! C 225 SP030/ Plain Raising Piece! C 225 SP060/ Spare Couplings EPDM! C 225 SC1/ Combined Filter and Silt Bucket 205 IBP Yard Gully Round with rodding eye and stopper Internal Internal Back Inlet Outlet dia depth dia dia ! C 100 RGP ! C 150 RGP Grating and Frame Light Duty Grating and Frame - RGP (up to 1 tonne) Medium Duty Grating and Frame - RGP (up to 5 tonne) Spare Stopper 100 RSG

32 PG2 Gullies and Fittings Vitrified Clay Gullies Road Gullies Road Gully Round with rodding eye and stopper Internal Internal Outlet Pack dia depth dia Qty ! C 100 RGR ! C 150 RGR ! C 150 RGR ! C 150 RGR Spare Stopper 100 RSG

33 PG2 Gullies and Traps Gullies Plastic Road Gullies Polyethylene Gully Trapped 150 SuperSleve outlet Internal Internal dia depth MGP2/ Clay Traps Universal Grease Trap 550 deep Supplied complete including filter basket, spatula, cover and frame and 100/110 conversion adaptors! C 100 RGU Internal Internal length width Spare Cover and Frame IGUC Spare Filter Basket and Spatula RGUFB

34 PG2 Grids and Cover Plates Metalwork Pedestrian Areas Only Gully Grid, (Square) Alloy 120 IG Alloy 150 IG Alloy 225 IG Alloy 300 IG Cast Iron 120 IG1C Cast Iron 150 IG2C 9.61 Cast Iron 225 IG3C Cast Iron 300 IG4C Galvanised 150 IG2G Galvanised 225 IG3G Alloy only Gully Grid (Rectangular) Alloy 265x120 IG For use with: Hopper SH3/1* Gully SG3/1* Gully SG4/1* Gully Grid, (Round) Gully size 100 Alloy 140 IG Alloy 197 IG Alloy 284 IG Cast Iron 140 IG6C Cast Iron 197 IG7C Cast Iron 284 IG8C Dish Grid, (Round) Dish size 300 Alloy 178 IG Cast Iron 178 IG11C Hinged Gratings and Frames (Square) Alloy 120 IH Alloy 150 IH Alloy 230 IH Alloy 316 IH Cast Iron 150 IH2C Cast Iron 230 IH3C Cast Iron 316 IH4C Hinged Gratings and Frames (Round) Gully size 150 Alloy 193 IH Cast Iron 265 IH7C Cast Iron 368 IH8C Cover Plate and Frame, (Square) Alloy 120 IS Alloy 150 IS Alloy 225 IS Cast Iron 120 IS1C Cast Iron 150 IS2C Cast Iron 225 IS3C * PG1 discount applies 33

35 PG2 Cover Plates Metalwork Cover Plate and Frame, (Round) Gully size 100 Alloy 140 IS Alloy 197 IS Alloy 273 IS Cast Iron 197 IS6C Cast Iron 273 IS7C Access Cover Plate and frame 300 x 150 IS0* * PG1 discount applies 34

36 PG2 Stop Tap Guards HepGuard Surface Box (polypropylene) Plain # 150 GSB Water # 150 GSB Gas # 150 GSB # Are to be withdrawn from stock and are subject to availability. 35

37 PG2 Land Drainage HepLine Pipe per pipe Perforated Plain Ended Standard 100/150 diameter coupling required from the SuperSleve range 100 x 1.6m perforated! C 100 LP x 1.75m perforated! C 150 LP Perforated complete with Fitted EPDM Coupling 225 x 1.75m perforated! C 225 LP175/ x 2.00m perforated! C 300 LP200/ Important te: Stoppers and fittings for HepLine subsoil drainage systems are available from the SuperSleve Range 36

38 PG2 100 to 300 Pipes and Fittings Vitrified Clay Unjointed Pipe Standard Pipe Length 1.0m per pipe! 100 RP ! 150 RP100/ ! 225 RP100/ ! 300 RP100/ Fittings Socket Adaptor Connects SuperSleve to traditional pipes + fittings! 100 SA1/1* 22.11! 150 SA1/ ! 225 SA1/ ! 300 SA1/ Interceptor With fall between inlet and outlet c/w stopper! 100 RI1/ ! 150 RI1/ RI1/ Interceptor c/w stopper! 100 RI2/ ! 150 RI2/ Interceptor Reverse Action c/w stopper! 100 RI3/ ! 150 RI3/ Square Raising Piece Height 75! 150 RRS2/ ! 150 RRS2/ ! 150 RRS2/ ! 150 RRS2/ ! 225 RRS3/ ! 225 RRS3/ Traps, Gullies Dish Tops! 100 RDR ! 150 RDR Subject to extended delivery period. Due to the manufacturing process size tolerances and appearance on this product can vary. * PG1 discount applies. 37

39 PG2 Cutters, Stoppers and Lubricant Clayware Accessories Pipe Cutter - Lever Cuts 100 SuperSleve 100 MPC1* Cuts 100 and 150 SuperSleve 150 MPC Pipe Trier 100/ MPT Lever Locking Stoppers Pipe size IL IL Lubricant 1 kilo Pack quantity 10 SL kilo Pack quantity 6 SL High Performance Jointing Lubricant recoended for nitrile seals cold and/or wet weather 1 kilo SL1C *PG1 discount applies to this item only 38

40 Universal Access Systems PG4 Access Chambers Universal Access Systems Access Chambers Up to 600 deep Pack qty Polypropylene Mini Access Chamber 300 diameter, depth /110 inlets conversion adaptors supplied. Complete unit including base unit, 2 raising pieces with cover and frame 100/110 SDAC1/ Polymer Cover and Frame (airtight) SDC x 345 square. Effective height 85 Raising Piece, SDC with rubber sealing ring Effective height 150 Base Unit 100/110 SDC deep with two 100/110 flexible inlets allowing 10 of movement. Conversion adaptors supplied 39

41 PG4 Inspection Chambers Universal Access Systems Inspection Chambers Up to 1.2m deep Pack qty 100/110 PPIC Polypropylene Inspection Chamber 475 diameter, supplied with 4 inlet stoppers. 940 deep, with 5 100/ /110 SPIC1/ inlets. Conversion adaptors supplied. 595 deep, with 5 100/ /110 SPIC2/ inlets. Conversion adaptors supplied Mixed Base PPIC Polypropylene Inspection Chamber 475 diameter supplied with 4 inlet stoppers deep, with 150/ /110 SPIC1/ straight through main channel with 2x150/160 branches at /160 & 2x100/110 branches at 45. Conversion adaptors supplied Raising Piece 175 high SPIC Sealing Ring for Raising Piece SPIC Base 225 deep, with 5 100/ /110 SPIC6/ inlets. Conversion adaptors and 4 inlet stoppers supplied Mixed Base 315 deep, with 150/ /150 SPIC6/ straight through main channel with 2x150/160 branches at 90 and 2x100/110 branches at 45. Conversion adaptors and 4 inlet stoppers supplied Inlet Adaptor 150 to SPIC Extra Stopper 100 Green 100 UGS Yellow 150 UYS Extra Conversion Adaptor 100 to M09H BL to M09J BL

42 PG4 Inspection Chambers Universal Access Systems Round Ductile Iron Cover and Plastics Frame Includes security clips for additional safety EN124 A15 35kN Round Ductile Iron Cover and Plastics Frame Includes security clips for additional safety EN124 B125 Round Composite Cover and Plastics Frame Includes security clips for additional safety. EN124 Cover loading A15 35kN Spare Security Clip for SPK8 and SPK9 Spare frame for SPK8, SPK9 and SPK10 Pack qty SPK SPK SPK SPK8+9CLIP UCIF Square Ductile Iron Cover and Frame (airtight) Includes security clips for SPKS additional safety. EN124 A15 35kN Accessories Spare Screws for mini access SKW chamber cover and frame Spare screws for SPKS8 SKW

43 WCH Non Man-Entry Inspection Chambers: Range 450 Inspection Chambers: Range 450 Pack qty Non Man-Entry Inspection Chambers: Range diameter shaft for use with 100 SuperSleve or 150 SuperSleve to a maximum invert depth of 3 metres Wavin Inspection Chamber Range 450 is approved and Kitemarked to BS EN :2009 Base Options D/S Equal Inspection Chamber Base 100 or 150 straight channel, for use with 100 or 150 SuperSleve. Supplied complete with a base-to-shaft sealing ring! NE ! NE D/S Equal Inspection Chamber Base 100 straight channel with one 100 x 45 and one 100 x 90 left hand branch entry, for use with 100 SuperSleve components. Supplied complete with a base to shaft sealing ring and one 100 blank-off plug for use in unused side entry! NE D/S Equal Inspection Chamber Base 100 straight channel with one 100 x 45 and one 100 x 90 right hand branch entry for use with 100 SuperSleve components. Supplied complete with a base to shaft sealing ring and one 100 blank-off plug for use in unused side entry! NE D/S Equal Inspection Chamber Base 100 straight channel with two 100 x 45 and x 90 left/right hand branch entries, for use with 100 SuperSleve components. Supplied complete with a base to shaft sealing ring and blank-off plugs for use in unused side entry! NE D/S Equal Inspection Chamber Base 150 straight channel with one 100 x 45 and one 150 x 90 left hand branch entry, for use with 100/150 SuperSleve components. Supplied complete with a base to shaft sealing ring and one 100 blank-off plug for use in unused side entry! NE

44 WCH Non Man-Entry Inspection Chambers: Range 450 Inspection Chambers: Range 450 Pack qty D/S UnEqual Inspection Chamber Base 150 straight channel with one 100 x 45 and one 150 x 90 right hand branch entry, for use with 100/150 SuperSleve components. Supplied complete with a base to shaft sealing ring and one 100 blank-off plug for use in unused side entry! NE D/S UnEqual Inspection Chamber Base 150 straight channel with two 100 x 45 and x 90 left/right hand entries, for use with 100/150 SuperSleve components. Supplied complete with a base to shaft sealing ring and and one 150 blank-off plugs for use in unused side entry! NE Shaft Options P/E Inspection Chamber Shaft 450 diameter x 3 metres long for use with all types of Range 450 bases! NE Restriction Access Cap for use with 40NE300 shaft sections, restricts access to 350, supplied with one 450 sealing ring Spares Chamber Base to Shaft Seal 450 diameter for use with 40NE NE TW117* * TWI discount applies 43

45 WCH Non Man-Entry Inspection Chambers: Range 600 Range 600 Inspection Chambers: Range 600 Pack qty Non Man-Entry Inspection Chambers: Range dia shaft for use with 150 SuperSleve (via adaptor TA/2), 225 SuperSleve (via adaptor TA/4) or 300 SuperSleve (via adaptor TA/7) to a maximum invert depth of 3 metres Wavin Inspection Chamber Range 600 is approved and Kitemarked to BS EN :2009 Base Options D/S Equal Inspection Chamber Base straight channel for use with 150 SuperSleve (via TA/2), 225 SuperSleve (via TA/4) or 300 SuperSleve (via TA/7) components. Supplied complete with a base to shaft sealing ring. For use with 150 SuperSleve (via TA/2) components! $ NE For use with 225 SuperSleve (via TA/4) components! $ NE For use with 300 SuperSleve (via TA/7) components! $ NE D/S Equal Inspection Chamber Base bent 90 channel for use with 150 SuperSleve (via TA/2), 225 SuperSleve (via TA/4) or 300 SuperSleve (via TA/7) components. Supplied complete with a base to shaft sealing ring. For use with 150 SuperSleve (via TA/2) components! $ NE For use with 225 SuperSleve (via TA/4) components! $ NE For use with 300 SuperSleve (via TA/7) components! $ NE

46 WCH Non Man-Entry Inspection Chambers: Range 600 Inspection Chambers: Range 600 Pack qty D/S Equal Inspection Chamber Base bent 30 channel for use with 150 SuperSleve (via TA/2), 225 SuperSleve (via TA/4) or 300 SuperSleve (via TA/7) components. Supplied complete with a base to shaft sealing ring. For use with 150 SuperSleve (via TA/2) components! $ NE For use with 225 SuperSleve (via TA/4) components! $ NE For use with 300 SuperSleve (via TA/7) components! $ NE D/S Equal Inspection Chamber Base straight channel, with two equal 90 left/right hand branch entries, for use with 150 SuperSleve (via TA/2), 225 SuperSleve (via TA/4) or 300 SuperSleve (via TA/7) components. Supplied complete with a base to shaft sealing ring. For use with 150 SuperSleve (via TA/2) components! $ NE For use with 225 SuperSleve (via TA/4) components! $ NE For use with 300 SuperSleve (via TA/7) components! $ NE Shaft Options P/E Inspection Chamber Shaft 600 diameter x 3 metres long for use with all types of Range 600 bases $ NE Restriction Access Cap for use with 60NE003 shaft sections, restricts access to 350, supplied with one 600 sealing ring Spares Chamber Base to Shaft seal 600 diameter for use with 60NE NE TW117* * TWI discount applies 45

47 WCH Inspection Chambers Ancillaries Inspection Chambers: Ancillaries Pack qty Ancillaries Range 600 Adaptor to SuperSleve 150, 225 and 300 adapts the Range 600 inlet 150 TA/ diameter to accept SuperSleve 225 TA/ TA/ Non Man-Entry Inspection Chambers for connecting 100/150 SuperSleve pipe to IC Ranges 315, 450 and 600 shaft sections Use the following components, along with the SA15/1 / SA15/2 adaptors refer to the Product Technical Guides for full instructions Connector Kit 110 NE NE

48 Full and part pack quantities, catalogue s. and values Pipes No. per pack Approx metres per pack Price SuperSleve 100 x 1.6m SP x 1.6m SP x 1.75m SP x 1.75m SP x 1.75m SP175/4S x 1.75m SP175/4S x 2.0m SP7S x 2.0m SP7S x 2.0m SP7S HepLine 100 x 1.6m LP x 1.75m LP x 1.75m LP175/ x 2.0m LP200/ Couplings No. per bag No. per pallet Price SuperSleve 100 SC1/ Couplings 150 SC1/ EPDM 225 SC1/ Adaptor 100 SA3/ from 150 SA3/ SuperSleve to HepSleve SuperSleve 100 SA Adaptors 150 SA Packs of Fittings No. per pallet Price SuperSleve HouseDrain 90 Bend - Single Socket SDB1/1S Bend - Single Socket SDB2/1S Bend - Single Socket SDB3/1S Bend - Single Socket SDB4/1S Flexible Bend SFB1/ Oblique Junction - Double Socket SDJ1/1D Curved Square Junction - Double Socket SDJ2/1D Rest Bend - Single Socket SDBR Taper Pipe - Single Socket SDT2/ Low Back P Trap - Single Socket SDG1/ Inlet Gully SDG3/ Packaging materials All packaging materials are free of charge and n-returnable. 47

49 Full and part pack quantities, catalogue s. and values Inspection Chambers No. per pallet Price Universal Manhole Systems Mini Access Chamber SDAC1/ Raising Piece SDC Chamber, 940 deep SPIC1/ Chamber, 595 deep SPIC2/ Raising Piece SPIC Base only SPIC6/ Packs of Fittings (Plain Ended) No. per pallet Price SuperSleve HouseDrain Bend SB1/ Bend SB2/ Bend SB3/ Bend SB4/ Oblique Junction SJ1/ Curved Square Junction SJ2/ Rectangular Hopper SH3/ Socket Adaptor SA1/ SuperSleve HouseDrain Bend SB1/ Bend SB2/ Bend SB3/ Bend SB4/ Oblique Junction, 150 x 100 SJ1/ Oblique Junction, 150 x 150 SJ1/ Curved Square Junction, 150 x 150 SJ2/ Curved Square Junction, 150 x 100 SJ2/ Rest Bend SBR Socket Adaptor SA1/ Channel Pipes No. per Pallet Price Plain End 100 x 0.6m CPP2/ x 1.0m CPP3/ x 0.6m CPP2/ x 1.0m CPP3/ Socketed 100 x 0.6m CP2/ x 1.0m CP3/ x 0.6m CP2/ x 1.0m CP3/

50 Clay Drainage Mechanical Off-Loading by Trailer Mounted Forklift (on request) Please te that it is our policy t to offer mechanical off-loading facilities for delivery to branch. You should be aware that there is limited availability of mechanical off-load vehicles, and in busy periods there may be a lead time for this service. A stable, clean and level surface is required for operation of the trailer mounted forklift equipment. Clay Drainage is ideally off-loaded by forklift or by M.O.L vehicle. Guide to Good Drainage Ordering To help us improve our service to you, our customers, please take the time to ensure that you provide us with the following information when placing your order. Completed purchase order number Customer s name, address and post code for delivery Requested delivery date Special delivery instructions, times, access, vehicles State units on all orders Line by line pricing, total net value and SPA No. as applicable Your name, telephone and address to resolve any mismatching details Product codes always override product descriptions. 49

51 Acceptance a) British Standards Institution! Hepworth Clay Drainage Systems comply, where applicable, with the requirements of the following British Standards: SuperSleve BS EN 295-1:2013 Vitrified clay pipes and fittings and pipe joints for drains and sewers. Gullies, Unjointed BS 65:1991 Specification for vitrified clay pipes and fittings, also flexible mechanical joints for use solely with surface water pipes and fittings. HepLine BS EN 295-5:2013 Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for perforated vitrified clay pipes and fittings. b) CE Mark C From the 1st July 2013, the Construction Products Regulation (CPR) will come into force. It will be mandatory for any construction product covered by a harmonised European Norm (hen) containing a ZA annex to have a Declaration of Performance (DoP) and an accompanying CE mark. Wavin will affix the CE mark to the actual product, and or product packaging. Individual products covered by a CE mark are also identified in the appropriate trade price list (August 2013 onwards). The specific DoP and CE mark details can be found and downloaded via the following link: 50

52 Numerical Index Page 40NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE TW117* TW117* NE NE NE NE IG1P CB1/1L CB1/1R CB1/2L CB1/2R CB1/3L CB1/3R CB1/4L CB1/4R CB2/1L CB2/1R CB2/2L CB2/2R CB2/3L CB2/3R CB2/4L CB2/4R CB3/1L CB3/1R CB3/2L CB3/2R CB3/3L CB3/3R CB3/4L CB3/4R CB4/1L Page CB4/1R CB4/2L CB4/2R CB4/3L CB4/3R CB4/4L CB4/4R CBP1/ CBP1/ CBP2/ CBP2/ CBP3/ CBP3/ CBP4/ CBP4/ CBT1/2L CBT1/2R CBT2/1L CBT2/1R CBT2/2L CBT2/2R CBT2/3L CBT2/3R CJ1/1L CJ1/1R CJ1/2L CJ1/2R CJ1/3L CJ1/3R CJ1/4L CJ1/4R CJ1/5L CJ1/5R CJ1/6L CJ1/6R CJ1/8L CJ1/8R CJ1/9L CJ1/9R CJ1/10L CJ1/10R CJ2/1L CJ2/1R CJ2/2L CJ2/2R CJ2/3L CJ2/3R CJ2/4L CJ2/4R CJ2/5L CJ2/5R CJ2/6L CJ2/6R Page CJ2/8L CJ2/8R CJ2/9L CJ2/9R CJ2/10L CJ2/10R CJ3/ CJ3/ CJ3/ CJ3/ CJ3/ CJ3/ CJ3/ CJ4/ CJ4/ CJ4/ CJ4/ CJ4/ CJ4/ CJ5/ CJ5/ CJ5/ CJ5/ CJ5/ CJ5/ CJ5/ CJ6/ CJ6/ CJ6/ CJ6/ CJ6/ CJ6/ CJP1/1L CJP1/1R CJP1/2L CJP1/2R CJP1/3L CJP1/3R CJP2/1L CJP2/1R CJP2/2L CJP2/2R CJP2/3L CJP2/3R CP1/ CP1/ CP1/ CP1/ CP2/ CP2/ CP2/ CP2/ CP3/

53 Numerical Index Page CP3/ CP3/ CP3/ CPP1/ CPP1/ CPP2/ CPP2/ CPP3/ CPP3/ CPP3/ CPP3/ CPP3/ CPP3/ CT1/ CT1/ CT1/ CT2/ CT2/ CT2/ CTP1/ CTP1/ CX1/1L CX1/1R CX1/2L CX1/2R CX1/3L CX1/3R CX1/4L CX1/4R CX1/5L CX1/5R CX1/6L CX1/6R CX1/7L CX1/7R CX1/8L CX1/8R CX1AL CX1AR CX1BL CX1BR CX1CL CX1CR CX1DL CX1DR CX1EL CX1ER CX1FL CX1FR CX1GL CX1GR CX1HL CX1HR Page CX2/1L CX2/1R CX2/2L CX2/2R CX2/3L CX2/3R CX2/4L CX2/4R CX2/5L CX2/5R CX2/6L CX2/6R CX2/7L CX2/7R CX2/8L CX2/8R CX2AL CX2AR CX2BL CX2BR CX2CL CX2CR CX2DL CX2DR CX2EL CX2ER CX2FL CX2FR CX2GL CX2GR CX2HL CX2HR GSB GSB GSB IBP IG IG1C IG1P IG1P* IG IG2* IG2* IG2* IG2C IG2G IG IG3C IG3G IG IG4C IG IG Page IG6C IG IG7C IG IG8C IG IG11C IGUC IH IH1* IH1* IH IH2* IH2C IH IH3C IH IH4C IH IH7C IH8C IL IL IS IS0* IS0* IS IS1* IS1* IS1C IS IS2* IS2* IS2* IS2C IS IS3C IS IS IS6C IS IS7C LP LP LP175/ LP200/ M09H BL M09J BL MGP2/ MPC1* MPC MPT NE

54 Numerical Index Page NE QB QB QB2* RGP RGP RGP RGP RGP RGP5B RGP RGP6B RGP RGP7B RGP RGP8B RGR RGR RGR RGR RGU RGUFB RP RP100/ RP100/ RP100/ RRS2/1* RRS2/2* RRS2/3* RRS2/4* RSG RSG SA1/ RAT/FM RDR RDR RI1/ RI1/ RI1/ RI2/ RI2/ RI3/ RI3/ RRS2/ RRS2/ RRS2/ RRS2/ RRS3/ RRS3/ S/4A06B S/4A06C SA1/1* SA1/ Page SA1/ SA1/ SA1/ SA1/ SA1/ SA3/ SA3/ SA SA SA SA14/ SA14/ SA15/ SA15/ SA SB2/ SB1/ SB1/ SB1/ SB1/5S SB1/ SB1/7S SB2/ SB2/ SB2/5S SB2/ SB2/7S SB3/ SB3/ SB3/ SB3/5S SB3/ SB3/7S SB4/ SB4/ SB4/ SB4/5S SB4/ SB4/7S SBA SBA SBR SBR SBR SBR5S SBR SBR7S SBRT SBRT SC1/ SC1/ SC1/ SC1/ Page SC1/ SC3/ SC3/ SC3/ SC3/ SC4/ SC4/ SDAC1/ SDB1/1S SDB2/1S SDB3/1S SDB4/1S SDBR SDC SDC SDC SDC SDG1/ SDG2/ SDG2/ SDG2/ SDG2/ SDG2/ SDG2/ SDG2/ SDG2/ SDG3/ SDG3/ SDG SDJ1/1D SDJ2/1D SDT2/ SFB1/ SG1/ SG1/ SG2/ SG2/ SG2/ SG2/ SG3/ SG3/1* SG4/ SG4/1* SH SH SH3/ SH3/1* SH3/ SJ1/ SJ1/ SJ1/ SJ1/ SJ1/7S

55 Numerical Index Page SJ1/ SJ1/8S SJ1/ SJ1/9D SJ1/ SJ1/14S SJ1/ SJ1/15S SJ1/ SJ1/17D SJ1/ SJ1/19D SJ2/ SJ2/ SJ2/ SJ2/ SJ2/9D SJ3/ SJ3/7S SJ3/ SJ3/8S SJ3/ SJ3/14S SJ3/ SJ3/15S SJ3/ SJ3/17D SJ3/ SJ3/19D SJA1L SJA1R SJA2L SJA2R SJA3L SJA3R SJS1/ SJS1/ SJS2/ SJS2/ SJS2/ SJS2/ SJS4/ SJS4/ SJS5/ SJS5/ SJS5/ SJS5/ SKW SKW SL SL1C SL SP Page SP SP SP7S SP030/ SP030/ SP030/ SP030/ SP030/5S SP030/ SP030/7S SP060/ SP060/ SP060/ SP060/ SP060/5S SP060/ SP060/7S SP100/ SP100/ SP100/ SP100/5S SP100/ SP100/7S SP175/ SP175/4S SPA SPA SPIC1/ SPIC1/ SPIC2/ SPIC SPIC SPIC6/ SPIC6/ SPIC SPK SPK8+9CLIP SPK SPK SPKS SRP SRP1* SRP1/ SRP1/ SRP SRP2* SRP2/ SRP SRP3* SRP SRP4* SRP SRP Page SRP SRP SRPS1/ SS1/ SS1/ SS2/ SS2/ SS3/ SS3/ S/S S/S S/S S/S ST2/ ST3/ ST3/ ST4/ TA/ TA/ TA/ UCIF UGS UYS VA VA VCB1/ VCB1/ VCB2/ VCB2/ VCB3/ VCB3/ VCB4/ VCB4/ VCTP4/

56 Notes 55

57 Important Notes All purchases are subject to our standard terms and conditions of sale, available at or call for a copy. Prices are subject to VAT at the current rate. Free delivery is subject to minimum order values as stated in your Wavin agreement. Wavin offers a prograe of continuous improvement and reserves the right to modify the specification of products without tice. All information in this publication is believed to be correct at time of going to press. However, responsibility can be accepted for any errors or omissions. Quality Assurance Hepworth Clay pipes are manufactured on a site whose carbon emissions have been independently verified to EU ETS, earning it the CICS Carbon Verified Assurance Mark for Wavin manufacturing sites operate Environmental Management Systems which comply with the requirements of and are certified to EN ISO 14001:2004, Certificate No Wavin products are manufactured under a quality management system which is approved to BS EN ISO 9001: Contact Orders and enquiries Tel: Literature requests literature@wavin.co.uk Technical advice Tel: drainage@hepworth.co.uk Address Wavin Limited Edlington Lane Edlington Doncaster South Yorkshire DN12 1BY Scan this QR code with your smartphone to visit the website drainage@hepworth.co.uk Web: 56

58 CE marking in full sight As of the 1 st July 2013, the Construction Products Regulation (CPR) came into force. It is mandatory for any construction product covered by a harmonised European Norm (hen) to have a Declaration of Performance (DoP) and an accompanying CE mark. The product standards and ranges covered by the CPR and identified in this price list are: BS EN 295-1:2013 SuperSleve diameter BS EN 295-5:2013 HepLine diameter Wavin Limited Edlington Lane Edlington Doncaster South Yorkshire DN12 1BY CL103 March 2018