Catalogue 7 STAUFF Test

Transcription

1 est Couplings est daptors est Hoses and Connectors Catalogue 7 SUFF est

2 Germany Walter Stauffenberg GmbH & Co. KG Im Ehrenfeld Werdohl el.: Fax: sales@stauff.com SUFF products and services are globally available through wholly-owned subsidiaries and a tight network of authorised distributors and representatives in all major industrial regions of the world. You can find detailed contact information on the last two pages of this product catalogue or at Please note: Unless otherwise stated, all data and figures in this product catalogue are approximate values and are only valid as references, which are not binding (also in respect to any third parties rights of protection) and thus do not release the customer / user from checking and testing the suitability of the products for the foreseen purposes. herefore, data and figures can only be used in a limited sense for construction purposes. he application of the products is beyond the control possibilities of the manufacturer and, therefore, is exclusively subject to the responsibility of the customer / user. In the event that a liability is nevertheless considered, any compensation will be limited to the value of the goods supplied by the manufacturer and used by the customer / user. s a matter of course, the manufacturer guarantees the perfect quality of all products in accordance with the General erms and Conditions of Business and Sale. Subject to modifications due to the ongoing development and improvement of the products. With the publication of this product catalogue, previous editions are no longer valid.

3 Introduction Introduction 4-11 est Couplings est daptors B est Hoses and Connectors C echnical ppendix D ppendix (Product-Specific bbreviations / Global Contact Directory) Catalogue 7 Edition 10/2017 3

4 Introduction Catalogue 1 SUFF Clamps Block Clamps Special Clamps Light Series Clamps Saddle Clamps U-Bolt Clamps Metal Clamps Construction Series Catalogue 2 SUFF Connect ube Connectors ssembly ools and Devices Catalogue 3 SUFF Flanges SE Flanges Gear Pump Flanges Catalogue 4 VOSWINKEL Hose Connectors Hose Connectors High-Pressure Hose Connectors Catalogue 5 VOSWINKEL Quick Release Couplings Push-to-Connect Couplings Multi Couplings Screw-to-Connect Couplings Catalogue 6 SUFF Valves wo-way Ball Valves Multi-Way Ball Valves Flow Control and Check Valves Gauge Isolator Valves 4 Catalogue 7 Edition 10/2017

5 Introduction Catalogue 7 SUFF est est Couplings est daptors est Hoses and Connectors Catalogue 8 SUFF Diagtronics Pressure Gauges Hydraulic esters Oil nalysis Equipment Catalogue 9 SUFF Filtration echnology Catalogue 10 SUFF Hydraulic ccessories Replacement Filter Elements Pressure Filters Return-Line Filters In-Line Filters Spin-On Filters Offline and Bypass Filters Filtration Systems Fluid Level and emperature Indicators ank Filler Breathers Giant and Desiccant ir Breathers Suction Strainers Diffusors Catalogue 7 Edition 10/2017 5

6 Introduction For more than 50 years, the companies of SUFF Group have been developing, manufacturing and distributing pipework equipment and hydraulic components for mechanical and plant engineering and for service and industrial maintenance. In addition to mobile and industrial hydraulic machinery, typical applications also include commercial and special purpose vehicles, rail transportation and energy technology. Likewise, SUFF products are used in marine, oil and gas applications and in the process, food and chemical industries. he overall range currently includes about standard products as well as numerous special and system solutions according to customer s specifications or based on our in-house development. ll SUFF products undergo relevant testing in accordance with international regulations and are governed by the high standards of the in-house quality management system. Furthermore, many items have received certifications and approvals from various international institutes, organisations and authorities who have independently confirmed the quality and performance of the products. Wholly-owned manufacturing, sales and service facilities in 18 countries and a tight global network of authorised distribution partners ensure high presence and service paired with a maximum of availability. Quality Management ISO 9001:2015 Environmental Management ISO 14001:2015 Safety Management OHSS 18001:2007 SUFF LINE Components With the seven dedicated SUFF Line product groups SUFF Clamps SUFF Connect SUFF Flanges VOSWINKEL Hose Connectors VOSWINKEL Quick Release Couplings SUFF Valves SUFF est from own, in-house development and manufacturing, the companies of the SUFF Group provide a comprehensive range of components for fastening and connecting pipes, tubes and hoses for mobile and industrial hydraulic applications and many other industries. he portfolio is completed by components for shutting-off, regulating, throttling and measuring fluid media. In order to perfectly match each other, SUFF Line products are designed and offered on a high, uniform level of quality. large proportion of the range made from steel comes as standard with the premium SUFF Zinc/Nickel surface coating, which is also optionally available for many of the other components. his coating offers the most reliable surface protection far beyond the previous market standards even after transport, handling and assembly of the components and meets all current legal requirements. If desired, Original Equipment Manufacturers can be supported with value-added services, from technical consultation to pre-assembly, assembly and kitting as well as logistics services: Support with the selection of suitable standard components and ordering options; provision of customised solutions according to customer s specifications or based on our in-house development from prototyping to large scale production nalysis and optimization of existing and design and developments of new systems aimed at increasing the efficiency and performance of machines and equipment and creating value for customers by reducing the total cost Pre-assembly, assembly and kitting of individual components to customer-specific system modules Individually coordinated procurement solutions (e.g. web shop and electronic data interchange) and supply models (e.g. from warehousing of customised components to Kanban logistics and just-in-time delivery of pre-fabricated system modules to the assembly lines of the customers) aimed at optimising material flows 6 Catalogue 7 Edition 10/2017

7 Introduction ligned with the needs of the market, the product groups SUFF est SUFF Diagtronics SUFF Filtration echnology SUFF Hydraulic ccessories include a comprehensive range of analogue and digital measuring equipment and devices, filtration systems and replacement filter elements as well as accessories for the construction of tanks, reservoirs, power packs and gear boxes in mobile and industrial hydraulics. he offer is completed by relevant value-added services: Support with the selection of suitable components and ordering options; provision of customised solutions according to customer s specifications or based on our in-house development from prototyping to large scale production nalysis of existing hydraulic circuits aimed at filtration systems, tank components and monitoring devices that perfectly match to the specific requirements, and developing integrated concepts to increase the efficiency and performance of machines and equipment Individually coordinated procurement solutions and supply models Catalogue 7 Edition 10/2017 7

8 Introduction SUFF est est couplings from the SUFF est product range are already planned in suitable positions in the hydraulic system during the design phase of a machine, or added at a later stage in the course of retrofitting or upgrading. hey allow machine operators and maintenance personnel to easily and safely connect analogue and digital measuring and display devices for the temporary testing or continuous monitoring of system pressure and other factors. If required, they also allow venting of the system as well as collecting representative fluid samples, e.g. for analysing the degree of contamination of the fluid. his type of connection requires no tools and can also be carried out during operation under full system pressure up to 630 bar / 9135 PSI (depending on the type of coupling). he check valve (ball or poppet valve) integrated into the test coupling opens only after connection of the measuring and display device with suitable adapters or test hoses, which complete the product range. his guarantees safe sealing of the connection without any risks of leakages or fluid escaping from the system. During production, SUFF test couplings are not crimped after insertion of the internal valve components and seals but rather closed with a threaded nipple in a fully automated process, which secures the proper functioning of the couplings under permanent loads. he vibration protection feature, which prevents self-loosening of the protective metal cap caused by vibrations in the system, is another competitive advantage. For the finishing of the test coupling range in carbon steel, SUFF relies on the SUFF Zinc/Nickel surface coating which has proven successful for many years. It provides reliable surface protection even after transport, handling and assembly and meets all current legal requirements. Versions in stainless steel V2 and V4 are generally available from stock. lternative materials and surfaces are available on request. For selected types and series, independent certificates and approvals can be provided: Military approval for use as gas filling valves for nitrogen accumulators by the German Bundeswehr (Wehrtechnische Dienststelle für Pionier- und ruppengerät) DVGW registration as test points for gas pressure control systems, issued by the German echnical and Scientific ssociation for Gas and Water 8 Catalogue 7 Edition 10/2017

9 Introduction SUFF Zinc/Nickel Coating Layers Sealing Passivation Zinc/Nickel Steel With at least 1200 hours resistance against red rust, the SUFF Zinc/Nickel surface coating offers excellent surface protection even after transport, handling and assembly. his was confirmed by testing in the salt-spray chamber according to DIN EN ISO Users across all industries and applications benefit from sophisticated technology, which has been developed for and used by the very demanding automotive industry for many years now and that is already the proven standard for a large proportion of SUFF components since t least 1200 hours resistance to red rust / base metal corrosion under practical conditions in the salt-spray chamber according to DIN EN ISO 9227 White rust occurs only by way of a slight grey haze Surpassing the requirements of the corrosion protection class K5 as defined by the VDM, the German Engineering ssociation (360 hours resistance to white rust / 720 hours resistance to red rust) Free of hexavalent chrome Cr(VI) ELV compliant according to 2000/53/EC (End of Life Vehicles Directive) RECH compliant according to 1907/2006/EC (Registration, Evaluation, uthorisation and Restriction of Chemicals) RoHS compliant according to 2002/95/EC (Restrictions of the Use of Hazardous Substances) ppealing colour scheme with a bright semi-gloss surface finish comparable to Stainless Steel Significantly reduced tendency to corrosion by contact with other metals (such as luminium and Stainless Steel) Improved abrasion resistance due to the ductility / plastic deformability of the coating Little to no risk of triggering allergies nickel release is down to only a fraction of the statutory limits relating to objects which come into direct and prolonged contact with the skin (independent results of the reference test method according DIN EN 1811 are available on request) Good paint adhesion properties Resistance against all commonly used hydraulic media Catalogue 7 Edition 10/2017 9

10 Introduction he SUFF online catalogue centre at provides fast and direct access to digital versions of this as well as other SUFF product catalogues in all available languages. Online Page-Flip Catalogues Easy navigation through index or the powerful full text search functionality Contents can be shared and forwarded by , printed or downloaded and saved in PDF file format lso suitable for mobile devices he fastest way to the online page-flip catalogue: he links that can be found at the bottom edge of all pages of this product catalogue will lead you directly to the corresponding page in the online page-flip catalogue. In doing so, contents can be searched, shared and forwarded by , printed or downloaded and saved in PDF file format. Scan the QR code next to the direct link with the camera of your mobile device* and also use the functions in this way. * may require a suitable app 10 Catalogue 7 Edition 10/ Download Catalogues Download entire product catalogues and save them in PDF file format Catalogue Request Contact form to request printed copies of the product catalogue as well as digital copies on CD-ROM or USB stick 10 Catalogue 7 Edition 10/2017

11 Introduction General information about the companies of SUFF Group, latest business and product news as well as complete global contact details Immediate access to and free download of 3D models and 2D drawings for a growing number of SUFF products Online database for the qiuck and eady identification and interchange of almost all common brands and types of replacement filter elements Follow SUFF and keep yourself updated: Facebook witter Linkedin Youtube Catalogue 7 Edition 10/

12 est 20 - Connection hread M16 x 2 SMK Introduction est Coupling with Ball Check est Coupling with Male hreaded Stud SMK est Coupling with Straight 24 Fitting SMK-20 ype G 17 est Coupling With 24 aper / O-ring (DKO) SMK-20 ype K 19 est Coupling with 37 JIC Connection SMK-20-JIC ype K 20 est Coupling with Straight 37 JIC Connection SMK-20-JIC ype G 21 Swivel Run ee with 37 JIC Connection SGV-JIC ype FM 22 est Coupling with ORFS Connection SMK-20 ype ORFS 23 Bulkhead SSK est daptor SD Gauge daptor SM-20 SMD est 20 - Connection hread M16 x 2 SKK Introduction est Coupling with Piston Valve est Coupling with Male hreaded Stud SKK est Coupling with Straight 24 Fitting est Coupling With 24 aper / O-ring (DKO) SKK-20 ype G SKK-20 ype K 29 31

13 est Couplings est 15 - Connection hread M16 x 1,5 SMK est 10 - Plug In System SMK Introduction Introduction est Coupling with Ball Check est Coupling with Ball Check est Coupling SMK est Coupling SMK with Male hreaded Stud with Male hreaded Stud est Coupling with Straight 24 Fitting SMK-15 ype G 35 Gauge daptor SM est Coupling SMK-15 ype K 36 est Coupling SMK-10 ype G 51 With 24 aper / O-ring (DKO) with Straight 24 Fitting Bulkhead SSK est Coupling With 24 aper / O-ring (DKO) SMK-10 ype K 52 Swivel Run ee with 37 JIC Connection SGV-JIC ype FM 37 Special est Coupling Solutions 53 est daptor SD Gauge daptor SM-15 SMD est 12 - Connection hread S12,65 x 1,5 SKK Introduction est Coupling with Piston Valve est Coupling SKK with Male hreaded Stud est Coupling SKK-12 ype G 43 with Straight 24 Fitting est Coupling SKK-12 ype K 44 With 24 aper / O-ring (DKO) Bulkhead SSKK Swivel Run ee SGV-JIC ype FM 45 with 37 JIC Connection est daptor SD Gauge daptor SM-12 SMD Catalogue 7 Edition 10/

14 est Couplings est Coupling with Ball Check SMK Catalogue 7 Edition 10/2017

15 est Couplings est Coupling with Ball Check SMK-20 B C Internal Seals D E B Ball C Vibration Safety O-ring D Spring F E Seal at Male hreaded Stud F Port Connection Fast Coupling for Monitoring and control of pressure Venting Sampling in high- and low-pressure systems Connection hread according to ISO dvantages est system at working pressure Leak proof connection before Ball Check is open Simple connection to measurement, control and switching devices Self locking metal protective cap Working Pressure Max. working pressure 630 bar / 9137 PSI For SMK ype G and K the recommended working pressure of fitting manufacturer should be noted. Connection under pressure up to 400 bar / 5801 PSI max. Materials Metal Parts: Standard material: Steel, zinc/nickel-plated = W3 Optional: Stainless Steel W4 ( / ISI 303) on request Stainless Steel W5 ( / ISI 316i) on request Seal ypes: B = NBR (Buna-N ) (emperature range -20 C C / -4 F F) Note: Internal Seal ypes made of FKM/FPM, even for standard NBR-type. V = FKM (Viton )* (emperature range -20 C C / -4 F F) E = EPDM Ethylene Propylene Diene Monomer Rubber (for Brake fluid, emperature range -40 C C / -40 F F) Vibration safety O-ring made of NBR (Buna-N ). Media Suitable for hydraulic oils and other Mineral oil based fluids (Check compatibility of Seal ype material) For use with other liquid media please contact SUFF Protection Cap he complete SUFF-est-20-type-SMK range is also available with a hexagonal protection cap made of steel or plastic protection cap. Ball: Stainless Steel SMK-20 est Coupling with Male hreaded Stud SMK-20 ype G est Coupling with Straight 24 Fitting SMK-20 ype K est Coupling With 24 aper / O-ring (DKO) SMK-20-JIC est Coupling with 37 JIC Connection SSK-20 Bulkhead Catalogue 7 Edition 10/

16 est Couplings est Coupling with Male hreaded Stud M16 SW (Hex) h2 h (.67) (.39) Ordering Codes *SMK*-20*-G1/4*-B*-C*-SK*-W3 * ype est Coupling with Ball Check SMK * Series SUFF est (Connection hread M16x2) * Port Connection acc. to dimension table -G1/4 * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Seal ype O-ring ype - Metal Joint ype B -B Elastomeric Sealing ype C -C aper ype D -D O-ring ype E -E * Protection Cap Knurled protection cap Hexagonal protection cap -SK Plastic protection cap -KK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Seal ype Stainless Steel V4 - -W (ISI 316 i) O-ring ype Metal Joint ype B Elastomeric Sealing ype C aper ype D 1 O-ring ype E For further information on Seal ypes, please see page hread Seal ype Working Pressure Dimensions orque Weight Ordering Codes ( bar /PSI) ( mm /in) ( N m /ft lb) ca. ( kg /lbs) ca. (Standard Option) h1 h2 Hex hread per , ,10 M8 x ype , ,70 M10 x M10 x , M12 x 1, , M14 x 1, , M16 x 1,5 ype B , G1/ , G1/ , G3/ , M10 x , M12 x 1, , M14 x 1, , ,70 M16 x 1, ype C ,80 G1/ G1/ , G3/ , G1/ , R1/8 K , ,10 R1/4 K ype D ,40 1/8 NP /4 NP , /16 24 UNF , , /16 20 UNF , , /2 20 UNF , , ,60 9/16 18 UNF ype E ,58 3/4 16 UNF M10 x , , M12 x1, , M14 x 1, , SMK-20-M8x1-B--W3 SMK-20-M10x1-B--W3 SMK-20-M10x1-B-B-W3 SMK-20-M12x1.5-B-B-W3 SMK-20-M14x1.5-B-B-W3 SMK-20-M16x1.5-B-B-W3 SMK-20-G1/8-B-B-W3 SMK-20-G1/4-B-B-W3 SMK-20-G3/8-B-B-W3 SMK-20-M10x1-B-C-W3 SMK-20-M12x1.5-B-C-W3 SMK-20-M14x1.5-B-C-W3 SMK-20-M16x1.5-B-C-W3 SMK-20-G1/8-B-C-W3 SMK-20-G1/4-B-C-W3 SMK-20-G3/8-B-C-W3 SMK-20-G1/2-B-C-W3 SMK-20-R1/8K-B-D-W3 SMK-20-R1/4K-B-D-W3 SMK-20-1/8NP-B-D-W3 SMK-20-1/4NP-B-D-W3 SMK-20-5/16UNF-B-E-W3 SMK-20-7/16UNF-B-E-W3 SMK-20-1/2UNF-B-E-W3 SMK-20-9/16UNF-B-E-W3 SMK-20-3/4UNF-B-E-W3 SMK-20-M10x1-B-E-W3 SMK-20-M12x1.5-B-E-W3 SMK-20-M14x1.5-B-E-W3 Dimensional drawings: ll dimensions in mm (in). 1 Suitable liquid / plastic sealant required. lternative materials and surface finishings are available upon request. Contact SUFF for further information. orque recommendations for Steel mating material. 16 Catalogue 7 Edition 10/2017

17 est Couplings est Coupling with Straight 24 Fitting SMK-20 ype G SW (Hex ) SW17 (Hex.67) SW B (Hex B) h Ød l2 l1 Series PN Pipe Dimensions Weight Ordering Codes ( bar /PSI) ( mm /in) ( kg /lbs) ca. (Standard Option) 2 L S Ød ~l1 3 l2 h Hex Hex B per , , , , , , , , , , , , , , , , , , , , , , , , , , SMK-20-06L-B-G-W3-MS SMK-20-08L-B-G-W3-MS SMK-20-10L-B-G-W3-MS SMK-20-12L-B-G-W3-MS SMK-20-15L-B-G-W3-MS SMK-20-18L-B-G-W3-MS SMK-20-22L-B-G-W3-MS SMK-20-28L-B-G-W3-MS SMK-20-35L-B-G-W3-MS SMK-20-42L-B-G-W3-MS SMK-20-06S-B-G-W3-MS SMK-20-08S-B-G-W3-MS SMK-20-10S-B-G-W3-MS SMK-20-12S-B-G-W3-MS SMK-20-14S-B-G-W3-MS SMK-20-16S-B-G-W3-MS SMK-20-20S-B-G-W3-MS SMK-20-25S-B-G-W3-MS SMK-20-30S-B-G-W3-MS SMK-20-38S-B-G-W3-MS Ordering Codes *SMK*-20*-18L*-B*-G*-SK*-W3*-MS * ype est Coupling with Ball Check SMK * Series SUFF est (Connection hread M16x2) * Outside ube Diameter acc. to dimension table -18 * Series Light Series L Heavy Series S * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Connection Straight 24 Fitting -G * Protection Cap Knurled protection cap Hexagonal protection cap -SK Plastic protection cap -KK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) * ssembling / Fitting body only Kitting Fitting body supplied with -MS Cutting rings and union nuts Fitting body supplied with soft-sealing cutting rings and union nuts -MSV 1 Weight including cutting rings and union nuts. 2 Standard option: Fitting body supplied with Cutting rings and union nuts. 3 pproximate dimension in assembled condition. Port acc. to ISO / DIN 2353 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

18 est Couplings 18 Catalogue 7 Edition 10/2017

19 est Couplings est Coupling with 24 aper / O-ring (DKO) SMK-20 ype K SW 17 (HEX.67) SW (Hex ) Ød l3 35 (1.38) SW 17 (HEX.67) SW (Hex ) Ød 37 (1.46) l3 Version Version B Series PN Pipe Dimensions hread Version Weight Ordering Codes (bar /PSI) ( mm /in) ( kg /lbs) ca. (Standard Option) L S Ød l3 Hex per ,5 14 8,00 M12 x 1, ,5 17 8,10 M14 x 1, ,5 19 9,30 M16 x 1, , ,60 M18 x 1, ,80 M22 x 1,5 B , ,20 M26 x 1,5 B , ,40 M30 x 2 B ,10 M36 x 2 B ,50 M45 x 2 B ,10 M52 x 2 B ,5 17 7,50 M14 x 1, ,5 19 8,70 M16 x 1, , ,20 M18 x 1, , ,70 M20 x 1, , ,10 M22 x 1,5 B ,40 M24 x 1,5 B ,00 M30 x 2 B ,60 M36 x 2 B ,70 M42 x 2 B ,70 M52 x 2 B SMK-20-06L-B-K-W3 SMK-20-08L-B-K-W3 SMK-20-10L-B-K-W3 SMK-20-12L-B-K-W3 SMK-20-15L-B-K-GS-W3 SMK-20-18L-B-K-GS-W3 SMK-20-22L-B-K-GS-W3 SMK-20-28L-B-K-GS-W3 SMK-20-35L-B-K-GS-W3 SMK-20-42L-B-K-GS-W3 SMK-20-06S-B-K-W3 SMK-20-08S-B-K-W3 SMK-20-10S-B-K-W3 SMK-20-12S-B-K-W3 SMK-20-14S-B-K-GS-W3 SMK-20-16S-B-K-GS-W3 SMK-20-20S-B-K-GS-W3 SMK-20-25S-B-K-GS-W3 SMK-20-30S-B-K-GS-W3 SMK-20-38S-B-K-GS-W3 Ordering Codes *SMK*-20*-18L*-B*-K*-GS*-SK*-W3 * ype est Coupling with Ball Check SMK * Series SUFF est (Connection hread M16x2) * Outside ube Diameter acc. to dimension table -18 * Series Light Series L Heavy Series S * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Connection 24 aper / O-ring (DKO) -K * Design One-piece design (Version ) Screwed design (Version B) -GS * Protection Cap Knurled protection cap Hexagonal protection cap -SK Plastic protection cap -KK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) With 24 aper / O-ring (DKO) Connection acc. to ISO / DIN 2353 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

20 est Couplings est Coupling with 37 JIC Connection SMK-20-JIC ype K SW17 (Hex.67) h SW B (Hex B) SW (Hex ) Version h SW (Hex ) Version B Ordering Codes *SMK*-20*-JIC3/4*-B*-K*-GS*-SK*-W3 * ype est Coupling with Ball Check SMK * Series SUFF est (Connection hread M16x2) * Connection 37 JIC Connection -JIC * Outside ube Diameter acc. to dimension table 3/4 * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Connection 37 JIC aper -K * Design One-piece design (Version ) Screwed design (Version B) -GS * Protection Cap Knurled protection cap Hexagonal protection cap -SK Plastic protection cap -KK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) Pipe JIC- Dimensions hread Version Weight Ordering Codes Ø Size ( mm /in) ( kg /lbs) ca. (Standard Option) inch h Hex Hex B per 100 1/ ,40 7/16 20 UNF / , ,30 1/2 20 UNF /8-6 55, ,10 9/16 18 UNF /2-8 56, ,40 3/4 16 UNF / ,20 7/8 14 UNF / , ,70-1-1/16 12 UN B ,90-1-5/16 12 UN B / , ,20-1-5/8 12 UN B / ,50-1-7/8 12 UN B SMK-20-JIC1/4-B-K-W3 SMK-20-JIC5/16-B-K-W3 SMK-20-JIC3/8-B-K-W3 SMK-20-JIC1/2-B-K-W3 SMK-20-JIC5/8-B-K-W3 SMK-20-JIC3/4-B-K-GS-W3 SMK-20-JIC1-B-K-GS-W3 SMK-20-JIC1-1/4-B-K-GS-W3 SMK-20-JIC1-1/2-B-K-GS-W3 With 37 JIC Connection acc. to SE J514 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Dimensional drawings: ll dimensions in mm (in). 20 Catalogue 7 Edition 10/2017

21 est Couplings est Coupling with Straight 37 JIC Connection SMK-20-JIC ype G SW 17 (Hex.67) SW (Hex ) h l2 l1 l2 Pipe JIC- Dimensions hread Weight Ordering Codes Ø Size ( mm /in) ( kg /lbs) ca. (Standard Option) inch l1 l2 h Hex per 100 1/ ,70 7/16 20 UNF SMK-20-JIC1/4-B-G-W3 5/ ,90 1/2 20 UNF SMK-20-JIC5/16-B-G-W3 3/ ,00 9/16 18 UNF SMK-20-JIC3/8-B-G-W3 1/2-8 48,5 16, ,90 3/4 16 UNF SMK-20-JIC1/2-B-G-W3 5/ ,5 19, ,70 7/8 14 UNF SMK-20-JIC5/8-B-G-W3 3/ /16 12 UN 27, SMK-20-JIC3/4-B-G-W /16 12 UN 32, SMK-20-JIC1-B-G-W3 1-1/ ,5 24, ,30 1-5/8 12 UN SMK-20-JIC1-1/4-B-G-W3 1-1/ , ,30 1-7/8 12 UN SMK-20-JIC1-1/2-B-G-W3 With Straight 37 JIC Connection acc. to SE J514 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Ordering Codes *SMK*-20*-JIC3/4*-B*-G*-SK*-W3 * ype est Coupling with Ball Check SMK * Series SUFF est (Connection hread M16x2) * Connection 37 JIC Connection -JIC * Outside ube Diameter acc. to dimension table 3/4 * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Connection Straight Fitting -G * Protection Cap Knurled protection cap Hexagonal protection cap -SK Plastic protection cap -KK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

22 est Couplings Swivel Run ee with 37 JIC Connection SGV-JIC ype FM SW (Hex ) SW B (Hex B) Ød 37 7/16-20 UNF l1 l2 Ordering Codes *SGV*-7/16UNF*-12*-JIC3/4*-FM*-W66 * ype Swivel Run ee SGV * Port Connection acc. to dimension table -7/16UNF * JIC Size acc. to dimension table -12 * Connection 37 JIC Connection -JIC * Outside ube Diameter acc. to dimension table 3/4 * Connection Female/Male hread -FM * Material Code Steel, zinc plated and -W66 hick-layer passivated Pipe JIC- Dimensions hread Weight Ordering Codes Ø Size ( mm /in) ( kg /lbs) ca. (Standard Option) inch Ø d l1 l2 Hex Hex B inch per 100 1/4 04 4,37 37,74 8, ,29 8,96 7/16 20 UNF SGV-7/16UNF-04-JIC1/4-FM-W66 3/8 06 7,54 40,01 9, ,46 9,60 9/16 18 UNF SGV-7/16UNF-06-JIC3/8-FM-W66 1/2 08 9,93 44,65 10, ,23 11,20 3/4 16 UNF SGV-7/16UNF-08-JIC1/2-FM-W66 5/ ,29 48,26 12,70 28,58 25,40 17,10 7/8 14 UNF SGV-7/16UNF-10-JIC1/2-FM-W66 3/ ,47 51,33 14,45 31,75 31,75 1-1/16 12 UN 20, SGV-7/16UNF-12-JIC3/4-FM-W ,44 57,30 15,09 38,10 38,10 1-5/16 12 UN 30, SGV-7/16UNF-16-JIC1-FM-W66 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Dimensional drawings: ll dimensions in mm (in). 22 Catalogue 7 Edition 10/2017

23 est Couplings est Coupling with ORFS Connection SMK-20 ype ORFS h l SW (Hex ) SW B (Hex B) hread ORFS- Dimensions Weight Ordering Codes Size ( mm /in) ( kg /lbs) ca. (Standard Option) h l Hex Hex B per 100 9/16 18 UNF , /16 16 UN , /16 16 UN , SMK ORFS-B-W3 SMK ORFS-B-W3 SMK ORFS-B-W3 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Ordering Codes *SMK*-20*-06*-ORFS*-B*-SK*-W3 * ype est Coupling with Ball Check SMK * Series SUFF est (Connection hread M16x2) * ORFS-Size acc. to dimension table -06 * Connection ORFS -ORFS * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Protection Cap Knurled protection cap Hexagonal protection cap -SK Plastic protection cap -KK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

24 est Couplings Bulkhead SSK-20 SW (Hex) max. 12 (max..47) h SW (Hex) Version Version B Version C Version D Ordering Codes *SSK*-20*-JIC1/4*-M*-B*-SK*-W3 * ype Bulkhead with Ball Check SSK * Series SUFF est (Connection hread M16x2) * Connection 37 JIC Connection -JIC * Outside ube Diameter acc. to dimension table 1/4 * Connection Male hread -M * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Protection Cap Knurled protection cap Hexagonal protection cap -SK Plastic protection cap -KK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) hread Dimensions Version Weight Ordering Codes ( mm /in) ( kg /lbs) ca. (Standard Option) h Hex per ,80 M16 x ,10 M14 x 1,5 1 B ,30 M16 x 1,5 1 B ,90 M18 x 1,5 1 B ,30 7/16 20 UNF 2 C ,00 9/16 18 UNF 3 D ,10 11/16 16 UN 3 D ,00 13/16 16 UNF 3 D SSK-20-B-W3 SSK-20/08L-B-W3 SSK-20/08S-B-W3 SSK-20/12L-B-W3 SSK-20-JIC1/4-M-B-W3 SSK ORFS-B-W3 SSK ORFS-B-W3 SSK ORFS-B-W3 lso available for gaseous media: ype SSKK 1 Compression ring assembly 08L/ 08S/ 12L according to ISO / DIN JIC cone fitting according to SE J514 3 O-ring face sealing according to SE J1453 Standard option: With Hexagon Lock Nut. Standard option - Version B: Excluding cutting rings and union nuts lternative materials and surface finishings are available upon request. Contact SUFF for further information. est daptor SD-20 M16 M16 h h Version Version B Ordering Codes *SD*-20/15*-B*-W3 * ype est daptor SD * Connection ype Version -20/15 Version -20/12 Version B -20/10 * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) hread Dimensions Version Weight Ordering Codes ( mm /in) ( kg /lbs) ca. (Standard Option) h per ,80 M16 x 1, ,30 S ,40 Plug in B SD-20/15-B-W3 SD-20/12-B-W3 SD-20/10-B-W3 1 Special thread: buttress thread S12,65 x1,5 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Dimensional drawings: ll dimensions in mm (in). 24 Catalogue 7 Edition 10/2017

25 est Couplings max. 12 (max..47) SW (Hex ) SW (Hex ) h Gauge daptor SM-20 Direct Gauge daptor SMD-20 h SW 19 (Hex.75) M16 hrough hole Ø 18 (.71) M16 Gauge daptor SM-20 Direct Gauge daptor SMD-20 hread Dimensions Weight Ordering Codes ( mm /in) ( kg /lbs) ca. (Standard Option) h Hex per 100 G1/ , G1/ , /4 NP , /2 NP , /16 20 UNF , /16 18 UNF , G1/ , G1/ , /4 NP , /2 NP , /16 20 UNF , /16 18 UNF , SM-20-G1/4-B-OR-W3 SM-20-G1/2-B-OR-W3 SM-20-1/4NP-B-W3 SM-20-1/2NP-B-W3 SM-20-7/16UNF-B-W3 SM-20-9/16UNF-B-W3 SMD-20-G1/4-B-OR-W3 SMD-20-G1/2-B-OR-W3 SMD-20-1/4NP-W3 SMD-20-1/2NP-W3 SMD-20-7/16UNF-W3 SMD-20-9/16UNF-W3 Ordering Codes *SM*-20*-G1/4*-B*-OR*-W3 * ype Gauge daptor SM * Series SUFF est (Connection hread M16x2) * hread acc. to dimension table -G1/4 * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Seal ype with O-ring -OR * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) Standard option - SM-20: With Hexagon Lock Nut. lternative materials and surface finishings are available upon request. Contact SUFF for further information. Snubber on request. Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

26 est Couplings est Coupling with Piston Valve SKK Catalogue 7 Edition 10/2017

27 est Couplings est Coupling with Piston Valve SKK-20 B C Internal Seals D E B Piston C Vibration Safety O-ring D Spring F E Seal at Male hreaded Stud F Port Connection Fast Coupling for Monitoring and control of pressure Venting Sampling in high- and low-pressure systems Filling of accumulators (special filling-version) Connection hread according to ISO dvantages est system at working pressure Leakproof connection before piston valve is open Simple connection to measurement, control and switching devices Self locking metal protective cap Working Pressure Max. working pressure 630 bar / 9137 PSI For SKK ype G and K the recommended working pressure of fitting manufacturer should be noted. Connection under pressure up to 400 bar / 5801 PSI max. DVGW DVGW registration as test points for gas pressure controlsystems, issued by the German echnical and Scientific ssociation for Gas and Water he DVGW approval relates solely to the SKK-12 and SKK-20 series with connection types: - M8x1-V--DVGW - M10x1-V--DVGW - 1/8NP-V-D-DVGW - 1/4NP-V-D-DVGW Media Suitable for hydraulic oils and other Mineral oil based fluids (Check compatibility of sealing material) For use with other liquid media please contact SUFF In case of ultimate tightness requirements for gaseous media, a special Gas-type is available Materials Metal Parts: Standard material: Steel, zinc/nickel-plated = W3 Optional: Stainless Steel W4 ( / ISI 303) on request Stainless Steel W5 ( / ISI 316i) on request Seal ypes: B = NBR (Buna-N ) (emperature range -20 C C / -4 F F) Note: Internal sealings made of FKM/FPM, even for standard NBR-type. V = FKM (Viton )* (emperature range -20 C C / -4 F F) E = EPDM Ethylene Propylene Diene Monomer Rubber (for Brake fluid, emperature range -40 C C / -40 F F) Vibration safety O-ring made of NBR (Buna-N ). Protection Cap he complete SUFF-est-20-ype-SKK range is also available with a hexagonal protection cap made of steel or plastic protection cap. SKK-20 est Coupling with Male hreaded Stud SKK-20 ype G est Coupling with Straight 24 Fitting SKK-20 ype K est Coupling With 24 aper / O-ring (DKO) Catalogue 7 Edition 10/

28 est Couplings est Coupling with Male hreaded Stud SKK-20 M16 SW (Hex) h2 h (.67) (.39) Ordering Codes *SKK*-20*-G1/4*-B*-C*-SK*-W3 * ype est Coupling with Piston Valve SKK * Series SUFF est (Connection hread M16x2) * Port Connection acc. to dimension table -G1/4 * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Seal ype O-ring ype - Metal Joint ype B -B Elastomeric Sealing ype C -C aper ype D -D O-ring ype E -E * Protection Cap Knurled protection cap Hexagonal protection cap -SK Plastic protection cap -KK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Seal ype Stainless Steel V4 - -W (ISI 316 i) O-ring ype Metal Joint ype B Elastomeric Sealing ype C aper ype D 1 O-ring ype E For further information on Seal ypes, please see page hread Seal ype Working Pressure Dimensions orque Weight Ordering Codes ( bar /PSI) ( mm /in) ( N m /ft lb) ca. ( kg /lbs) ca. (Standard Option) h1 h2 Hex hread per , ,40 M8 x ype , ,90 M10 x M12 x 1, , M14 x 1, , M16 x 1,5 ype B , G1/ , G3/ , M10 x , M12 x 1, , M14 x 1, , ,80 M16 x 1, ype C ,00 G1/ G1/ , G3/ , G1/ , R1/8 K , ,20 R1/4 K ype D ,30 1/8 NP /4 NP , /16 24 UNF , , /16 20 UNF , , , ,10 1/2 20 UNF ype E ,80 9/16 18 UNF M12 x1, , M14 x 1, , SKK-20-M8x1-B--W3 SKK-20-M10x1-B--W3 SKK-20-M12x1.5-B-B-W3 SKK-20-M14x1.5-B-B-W3 SKK-20-M16x1.5-B-B-W3 SKK-20-G1/4-B-B-W3 SKK-20-G3/8-B-B-W3 SKK-20-M10x1-B-C-W3 SKK-20-M12x1.5-B-C-W3 SKK-20-M14x1.5-B-C-W3 SKK-20-M16x1.5-B-C-W3 SKK-20-G1/8-B-C-W3 SKK-20-G1/4-B-C-W3 SKK-20-G3/8-B-C-W3 SKK-20-G1/2-B-C-W3 SKK-20-R1/8K-B-D-W3 SKK-20-R1/4K-B-D-W3 SKK-20-1/8NP-B-D-W3 SKK-20-1/4NP-B-D-W3 SKK-20-5/16UNF-B-E-W3 SKK-20-7/16UNF-B-E-W3 SKK-20-1/2UNF-B-E-W3 SKK-20-9/16UNF-B-E-W3 SKK-20-M12x1.5-B-E-W3 SKK-20-M14x1.5-B-E-W3 1 Suitable liquid / plastic sealant required. lternative materials and surface finishings are available upon request. Contact SUFF for further information. orque recommendations for Steel mating material. Dimensional drawings: ll dimensions in mm (in). 28 Catalogue 7 Edition 10/2017

29 est Couplings est Coupling with Straight 24 Fitting SKK-20 ype G SW (Hex ) SW17 (Hex.67) SW B (Hex B) h Ød l2 l1 Series PN Pipe Dimensions Weight Ordering Codes ( bar /PSI) ( mm /in) ( kg /lbs) ca. (Standard Option) 2 L S Ød ~l1 3 l2 h Hex Hex B per , , , , , , , , , , , , , , , , , , , , , , , , , , , SKK-20-06L-B-G-W3-MS SKK-20-08L-B-G-W3-MS SKK-20-10L-B-G-W3-MS SKK-20-12L-B-G-W3-MS SKK-20-15L-B-G-W3-MS SKK-20-18L-B-G-W3-MS SKK-20-22L-B-G-W3-MS SKK-20-28L-B-G-W3-MS SKK-20-35L-B-G-W3-MS SKK-20-42L-B-G-W3-MS SKK-20-06S-B-G-W3-MS SKK-20-08S-B-G-W3-MS SKK-20-10S-B-G-W3-MS SKK-20-12S-B-G-W3-MS SKK-20-14S-B-G-W3-MS SKK-20-16S-B-G-W3-MS SKK-20-20S-B-G-W3-MS SKK-20-25S-B-G-W3-MS SKK-20-30S-B-G-W3-MS SKK-20-38S-B-G-W3-MS Ordering Codes *SKK*-20*-18L*-B*-G*-SK*-W3*-MS * ype est Coupling with Piston Valve SKK * Series SUFF est (Connection hread M16x2) * Outside ube Diameter acc. to dimension table -18 * Series Light Series L Heavy Series S * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Connection Straight 24 Fitting -G * Protection Cap Knurled protection cap Hexagonal protection cap -SK Plastic protection cap -KK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) * ssembling / Fitting body only Kitting Fitting body supplied with -MS Cutting rings and union nuts Fitting body supplied with soft-sealing cutting rings and union nuts -MSV 1 Weight including cutting rings and union nuts. 2 Standard option: Fitting body supplied with Cutting rings and union nuts. 3 pproximate dimension in assembled condition. Port acc. to ISO / DIN 2353 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

30 est Couplings 30 Catalogue 7 Edition 10/2017

31 est Couplings est Coupling with 24 aper / O-ring (DKO) SKK-20 ype K SW 17 (HEX.67) SW (Hex ) Ød l3 35 (1.38) SW 17 (HEX.67) SW (Hex ) Ød 37 (1.46) l3 Version Version B Series PN Pipe Dimensions hread Version Weight Ordering Codes ( bar /PSI) ( mm /in) ( kg /lbs) ca. (Standard Option) L S Ød l3 Hex per ,5 14 8,10 M12 x 1, ,5 17 7,80 M14 x 1, ,5 19 9,20 M16 x 1, , ,50 M18 x 1, ,10 M22 x 1,5 B , ,40 M26 x 1,5 B , ,00 M30 x 2 B ,50 M36 x 2 B ,20 M45 x 2 B ,90 M52 x 2 B ,5 17 8,00 M14 x 1, ,5 19 8,80 M16 x 1, , ,30 M18 x 1, , ,00 M20 x 1, , ,20 M22 x 1,5 B ,40 M24 x 1,5 B ,10 M30 x 2 B ,20 M36 x 2 B ,20 M42 x 2 B ,60 M52 x 2 B SKK-20-06L-B-K-W3 SKK-20-08L-B-K-W3 SKK-20-10L-B-K-W3 SKK-20-12L-B-K-W3 SKK-20-15L-B-K-GS-W3 SKK-20-18L-B-K-GS-W3 SKK-20-22L-B-K-GS-W3 SKK-20-28L-B-K-GS-W3 SKK-20-35L-B-K-GS-W3 SKK-20-42L-B-K-GS-W3 SKK-20-06S-B-K-W3 SKK-20-08S-B-K-W3 SKK-20-10S-B-K-W3 SKK-20-12S-B-K-W3 SKK-20-14S-B-K-GS-W3 SKK-20-16S-B-K-GS-W3 SKK-20-20S-B-K-GS-W3 SKK-20-25S-B-K-GS-W3 SKK-20-30S-B-K-GS-W3 SKK-20-38S-B-K-GS-W3 Ordering Codes *SKK*-20*-18L*-B*-K*-GS*-SK*-W3 * ype est Coupling with Piston Valve SKK * Series SUFF est (Connection hread M16x2) * Outside ube Diameter acc. to dimension table -18 * Series Light Series L Heavy Series S * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Connection 24 aper / O-ring (DKO) -K * Design One-piece design (Version ) Screwed design (Version B) -GS * Protection Cap Knurled protection cap Hexagonal protection cap -SK Plastic protection cap -KK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) With 24 aper / O-ring (DKO) Connection acc. to ISO / DIN 2353 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

32 est Couplings est Coupling with Ball Check SMK Catalogue 7 Edition 10/2017

33 est Couplings est Coupling with Ball Check SMK-15 B C Internal Seals D E B Ball C Vibration Safety O-ring D Spring F E Seal at Male hreaded Stud F Port Connection Fast Coupling for Monitoring and control of pressure Venting Sampling in high- and low-pressure systems dvantages est system at working pressure Leak proof connection before Ball Check is open Simple connection to measurement, control and switching devices Self locking metal protective cap Working Pressure Max. working pressure 630 bar / 9137 PSI For SMK ype G and K the recommended working pressure of fitting manufacturer should be noted. Connection under pressure up to 630 bar / 9137 PSI max. Materials Metal Parts: Standard Material Code: Steel, zinc/nickel-plated, black = W3 Optional: Stainless Steel W4 ( / ISI 303) on request Stainless Steel W5 ( / ISI 316i) on request Ball: Stainless Steel Seal ypes: B = NBR (Buna-N ) (emperature range -20 C C / -4 F F) Note: Internal sealings made of FKM/FPM, even for standard NBR-type. V = FKM (Viton ) (emperature range -20 C C / -4 F F) E = EPDM Ethylene Propylene Diene Monomer Rubber (for Brake fluid, emperature range -40 C C / -40 F F) Vibration safety O-ring made of NBR (Buna-N ). Media Suitable for hydraulic oils and other Mineral oil based fluid (Check compatibility of seal material) For use with other liquid media please contact SUFF Protection Cap he complete SUFF-est-15-ype-SMK range is also available with a hexagonal protection cap made of steel. Note On request ES 15 is also available as SKK-type including Gas - and Filling -versions. SMK-15 est Coupling with Male hreaded Stud SMK-15 ype G est Coupling with Straight 24 Fitting SMK-15 ype K est Coupling With 24 aper / O-ring (DKO) SSK-15 Bulkhead Catalogue 7 Edition 10/

34 est Couplings est Coupling with Male hreaded Stud SMK-15 M16x1,5 SW (Hex) h2 h (.67) (.39) Ordering Codes *SMK*-15*-G1/4*-B*-C*-SK*-W3 * ype est Coupling with Ball Check SMK * Series SUFF est (Connection hread M16x1,5) * Port Connection acc. to dimension table -G1/4 * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Seal ype O-ring ype - Metal Joint ype B -B Elastomeric Sealing ype C -C aper ype D -D O-ring ype E -E * Protection Cap Knurled protection cap Hexagonal protection cap -SK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Seal ype Stainless Steel V4 - -W (ISI 316 i) O-ring ype Metal Joint ype B hread Seal ype Working Pressure Dimensions orque Weight Ordering Codes ( bar /PSI) ( mm /in) ( N m /ft lb) ca. ( kg /lbs) ca. (Standard Option) h1 h2 Hex hread per 100 M10 x 1 ype , , M14 x 1, , M16 x 1, , G1/8 ype B , ,21 G1/ , G3/ , M12 x 1, , M14 x 1, , M16 x 1,5 ype C , G1/ , G1/ , R1/4 K , /8 NP ype D , /4 NP , /16 20 UNF , , /16 18 UNF ype E , M14 x 1, , SMK-15-M10x1-B--W3 SMK-15-M14x1.5-B-B-W3 SMK-15-M16x1.5-B-B-W3 SMK-15-G1/8-B-B-W3 SMK-15-G1/4-B-B-W3 SMK-15-G3/8-B-B-W3 SMK-15-M12x1.5-B-C-W3 SMK-15-M14x1.5-B-C-W3 SMK-15-M16x1.5-B-C-W3 SMK-15-G1/8-B-C-W3 SMK-15-G1/4-B-C-W3 SMK-15-R1/4K-B-D-W3 SMK-15-1/8NP-B-D-W3 SMK-15-1/4NP-B-D-W3 SMK-15-7/16UNF-B-E-W3 SMK-15-9/16UNF-B-E-W3 SMK-15-M14x1.5-B-E-W3 1 Suitable liquid / plastic sealant required. lternative materials and surface finishings are available upon request. Contact SUFF for further information. orque recommendations for Steel mating material. Elastomeric Sealing ype C aper ype D 1 O-ring ype E For further information on Seal ypes, please see page Dimensional drawings: ll dimensions in mm (in). 34 Catalogue 7 Edition 10/2017

35 est Couplings est Coupling with Straight 24 Fitting SMK-15 ype G SW (Hex ) SW17 (Hex.67) SW B (Hex B) Ød h l2 l1 Series PN Pipe Dimensions Weight Ordering Codes ( bar /PSI) ( mm /in) ( kg /lbs) ca. (Standard Option) 2 L S Ød ~l1 3 l2 h Hex Hex B per , , , , , , , , , , , , , , , , , , , , , , , , , , SMK-15-06L-B-G-W3-MS SMK-15-08L-B-G-W3-MS SMK-15-10L-B-G-W3-MS SMK-15-12L-B-G-W3-MS SMK-15-15L-B-G-W3-MS SMK-15-18L-B-G-W3-MS SMK-15-22L-B-G-W3-MS SMK-15-28L-B-G-W3-MS SMK-15-35L-B-G-W3-MS SMK-15-42L-B-G-W3-MS SMK-15-06S-B-G-W3-MS SMK-15-08S-B-G-W3-MS SMK-15-10S-B-G-W3-MS SMK-15-12S-B-G-W3-MS SMK-15-14S-B-G-W3-MS SMK-15-16S-B-G-W3-MS SMK-15-20S-B-G-W3-MS SMK-15-25S-B-G-W3-MS SMK-15-30S-B-G-W3-MS SMK-15-38S-B-G-W3-MS Ordering Codes *SMK*-15*-18L*-B*-G*-SK*-W3*-MS * ype est Coupling with Ball Check SMK * Series SUFF est (Connection hread M16x1,5) * Outside ube Diameter acc. to dimension table -18 * Series Light Series L Heavy Series S * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Connection Straight 24 Fitting -G * Protection Cap Knurled protection cap Hexagonal protection cap -SK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) * ssembling / Fitting body only Kitting Fitting body supplied with -MS Cutting rings and union nuts Fitting body supplied with soft-sealing cutting rings and union nuts -MSV 1 Weight including cutting rings and union nuts. 2 Standard option: Fitting body supplied with Cutting rings and union nuts. 3 pproximate dimension in assembled condition. Port acc. to ISO / DIN 2353 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

36 est Couplings est Coupling with 24 aper / O-ring (DKO) SMK-15 ype K SW 17 (HEX.67) SW (Hex ) Ød l3 35 (1.38) SW 17 (HEX.67) SW (Hex ) Ød 37 (1.46) l3 Version Version B Ordering Codes *SMK*-15*-18L*-B*-K*-GS*-SK*-W3 * ype est Coupling with Ball Check SMK * Series SUFF est (Connection hread M16x1,5) * Outside ube Diameter acc. to dimension table -18 * Series Light Series L Heavy Series S * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Connection 24 aper / O-ring (DKO) -K * Design One-piece design (Version ) Screwed design (Version B) -GS * Protection Cap Knurled protection cap Hexagonal protection cap -SK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) Series PN Pipe Dimensions hread Version Weight Ordering Codes ( bar /PSI) ( mm /in) ( kg /lbs) ca. (Standard Option) L S Ød l3 Hex per ,5 14 8,00 M12 x 1, ,5 17 8,00 M14 x 1, ,5 19 9,30 M16 x 1, , ,60 M18 x 1, ,00 M22 x 1,5 B , ,30 M26 x 1,5 B , ,00 M30 x 2 B ,50 M36 x 2 B ,43 M45 x 2 B ,40 M52 x 2 B ,5 17 7,90 M14 x 1, ,5 19 8,80 M16 x 1, , ,30 M18 x 1, , ,90 M20 x 1, , ,60 M22 x 1,5 B ,20 M24 x 1,5 B ,20 M30 x 2 B ,50 M36 x 2 B ,40 M42 x 2 B ,80 M52 x 2 B SMK-15-06L-B-K-W3 SMK-15-08L-B-K-W3 SMK-15-10L-B-K-W3 SMK-15-12L-B-K-W3 SMK-15-15L-B-K-GS-W3 SMK-15-18L-B-K-GS-W3 SMK-15-22L-B-K-GS-W3 SMK-15-28L-B-K-GS-W3 SMK-15-35L-B-K-GS-W3 SMK-15-42L-B-K-GS-W3 SMK-15-06S-B-K-W3 SMK-15-08S-B-K-W3 SMK-15-10S-B-K-W3 SMK-15-12S-B-K-W3 SMK-15-14S-B-K-GS-W3 SMK-15-16S-B-K-GS-W3 SMK-15-20S-B-K-GS-W3 SMK-15-25S-B-K-GS-W3 SMK-15-30S-B-K-GS-W3 SMK-15-38S-B-K-GS-W3 With 24 aper / O-ring (DKO) Connection acc. to ISO / DIN 2353 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Dimensional drawings: ll dimensions in mm (in). 36 Catalogue 7 Edition 10/2017

37 est Couplings SW (Hex) max. 12 (max..47) h SW (Hex) max.12 (max..47) Bulkhead SSK-15 h SW (Hex) SW (Hex) Version Version B hread Dimensions Version Weight Ordering Codes ( mm /in) ( kg /lbs) ca. (Standard Option) h Hex per ,20 M16 x 1, ,30 M16 x 1,5 1 B SSK-15-B-W3 SSK-15/08S-B-W3 lso available for gaseous media: ype SSKK 1 Compression ring assembly 08S according to ISO / DIN 2353 Standard option: With Hexagon Lock Nut. Standard option - Version B: Excluding cutting rings and union nuts lternative materials and surface finishings are available upon request. Contact SUFF for further information. Ordering Codes *SSK*-15/08S*-B*-SK*-W3 * ype Bulkhead with Ball Check SSK * Series SUFF est (Connection hread M16x1,5) * Outside ube Diameter acc. to dimension table /08 * Series Heavy Series S * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Protection Cap Knurled protection cap Hexagonal protection cap -SK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) SW (Hex ) SW B (Hex B) Swivel Run ee with 37 JIC Connection SGV-JIC ype FM Ød 37 7/16-20 UNF l1 l2 Pipe JIC- Dimensions hread Weight Ordering Codes Ø Size ( mm /in) ( kg /lbs) ca. (Standard Option) inch Ø d l1 l2 Hex Hex B inch per 100 1/4 04 4,37 37,74 8, ,29 8,96 7/16 20 UNF SGV-7/16UNF-04-JIC1/4-FM-W66 3/8 06 7,54 40,01 9, ,46 9,60 9/16 18 UNF SGV-7/16UNF-06-JIC3/8-FM-W66 1/2 08 9,93 44,65 10, ,23 11,20 3/4 16 UNF SGV-7/16UNF-08-JIC1/2-FM-W66 5/ ,29 48,26 12,70 28,58 25,40 17,10 7/8 14 UNF SGV-7/16UNF-10-JIC1/2-FM-W66 3/ ,47 51,33 14,45 31,75 31,75 1-1/16 12 UN 20, SGV-7/16UNF-12-JIC3/4-FM-W ,44 57,30 15,09 38,10 38,10 1-5/16 12 UN 30, SGV-7/16UNF-16-JIC1-FM-W66 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Ordering Codes *SGV*-7/16UNF*-12*-JIC3/4*-FM*-W66 * ype Swivel Run ee SGV * Port Connection acc. to dimension table -7/16UNF * JIC Size acc. to dimension table -12 * Connection 37 JIC Connection -JIC * Outside ube Diameter acc. to dimension table 3/4 * Connection Female/Male hread -FM * Material Code Steel, zinc plated and -W66 hick-layer passivated Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

38 est Couplings est daptor SD-15 M16x1,5 M16x1,5 h h Version Version B Ordering Codes *SD*-15/20*-B*-W3 * ype est daptor SD * Connection ype Version -15/20 Version -15/12 Version B -15/10 * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) hread Dimensions Version Weight Ordering Codes ( mm /in) ( kg /lbs) ca. (Standard Option) h per ,20 M16 x ,40 S ,20 Plug in B SD-15/20-B-W3 SD-15/12-B-W3 SD-15/10-B-W3 1 Special thread: buttress thread S12,65 x1,5 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Gauge daptor SM-15 Direct Gauge daptor SMD-15 max. 12 (max..47) SW (Hex ) h hrough hole Ø 18 (.71) SW (Hex ) h SW 19 (Hex.75) M16x1,5 M16x1,5 Gauge daptor SM-15 Direct Gauge daptor SMD-15 Ordering Codes *SM*-15*-G1/4*-B*-OR*-W3 * ype Gauge daptor SM * Series SUFF est (Connection hread M16x1,5) * hread acc. to dimension table -G1/4 * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Seal ype with O-ring -OR * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) hread Dimensions Weight Ordering Codes ( mm /in) ( kg /lbs) ca. (Standard Option) h Hex per 100 G1/ , G1/ , /4 NP , /2 NP , G1/ , G1/ , /4 NP , /2 NP , ,76 SM-15-G1/4-B-OR-W3 SM-15-G1/2-B-OR-W3 SM-15-1/4NP-B-W3 SM-15-1/2NP-B-W3 SMD-15-G1/4-B-OR-W3 SMD-15-G1/2-B-OR-W3 SMD-15-1/4NP-W3 SMD-15-1/2NP-W3 Standard option - SM-15: With Hexagon Lock Nut. lternative materials and surface finishings are available upon request. Contact SUFF for further information. Snubber on request. Dimensional drawings: ll dimensions in mm (in). 38 Catalogue 7 Edition 10/2017

39 est Couplings Catalogue 7 Edition 10/

40 est Couplings est Coupling with Piston Valve SKK Catalogue 7 Edition 10/2017

41 est Couplings est Coupling with Piston Valve SKK-12 B C Internal Seals B Piston E C Vibration Safety O-ring D D Spring F E Seal at Male hreaded Stud F Port Connection Fast Coupling for Monitoring and control of pressure Venting Sampling in high- and low-pressure systems Filling of accumulators (special filling-version) dvantages est system at working pressure Leakproof connection before piston valve is open Simple connection to measurement, control and switching devices Self locking metal protective cap Working Pressure Max. working pressure 630 bar/ 9137 PSI For SKK ype G and K the recommended working pressure of fitting manufacturer should be noted. Connection under pressure up to 400 bar / 5801 PSI max. DVGW DVGW registration as test points for gas pressure controlsystems, issued by the German echnical and Scientific ssociation for Gas and Water he DVGW approval relates solely to the SKK-12 and SKK-20 series with connection types: - M8x1-V--DVGW - M10x1-V--DVGW - 1/8NP-V-D-DVGW - 1/4NP-V-D-DVGW Materials Metal Parts: Standard material: Steel, zinc/nickel-plated = W3 Optional: Stainless Steel W4 ( / ISI 303) on request Stainless Steel W5 ( / ISI 316i) on request Seal ypes: B = NBR (Buna-N ) (emperature range -20 C C / -4 F F) Note: Internal sealings made of FKM/FPM, even for standard NBR-type. V = FKM (Viton ) (emperature range -20 C C / -4 F F) E = EPDM Ethylene Propylene Diene Monomer Rubber (for Brake fluid, emperature range -40 C C / -40 F F) Vibration safety O-ring made of NBR (Buna-N ). Media Suitable for hydraulic oils and other Mineral oil based fluids (Check compatibility of seal material) For use with other liquid media please contact SUFF In case of ultimate tightness requirements for gaseous media, a special Gas-type is available Protection Cap he complete SUFF-est-12-type-SKK range is also available with a plastic protection cap. SKK-12 est Coupling with Male hreaded Stud SKK-12 ype G est Coupling with Straight 24 Fitting SMK-12 ype K est Coupling With 24 aper / O-ring (DKO) SSKK-12 Bulkhead Catalogue 7 Edition 10/

42 est Couplings est Coupling with Male hreaded Stud SKK-12 S12*1 SW (Hex) h h (.59) (.31) Ordering Codes *SKK*-12*-G1/4*-B*-C*-KK*-W3 * ype est Coupling with Piston Valve SKK * Series SUFF est (Connection hread S12,65 x 1,5) * Port Connection acc. to dimension table -G1/4 * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Seal ype O-ring ype - Metal Joint ype B -B Elastomeric Sealing ype C -C aper ype D -D O-ring ype E -E * Protection Cap Knurled protection cap Plastic protection cap -KK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Seal ype Stainless Steel V4 - -W (ISI 316 i) O-ring ype Metal Joint ype B Elastomeric Sealing ype C aper ype D 1 hread Seal ype Working Pressure Dimensions orque Weight Ordering Codes ( bar /PSI) ( mm /in) ( N m /ft lb) ca. ( kg /lbs) ca. (Standard Option) h1 h2 Hex hread per , ,50 M8 x ype , ,30 M10 x M12 x 1, , M14 x 1, , M16 x 1,5 ype B , G1/ , G3/ , M12 x 1, , G1/8 ype C , G1/ , R1/8 K , ,40 R1/4 K ype D ,00 1/8 NP /4 NP , /16 24 UNF , , /16 20 UNF , , /2 20 UNF ype E , , /16 18 UNF , M12 x1, , SKK-12-M8x1-B--W3 SKK-12-M10x1-B--W3 SKK-12-M12x1.5-B-B-W3 SKK-12-M14x1.5-B-B-W3 SKK-12-M16x1.5-B-B-W3 SKK-12-G1/4-B-B-W3 SKK-12-G3/8-B-B-W3 SKK-12-M12x1.5-B-C-W3 SKK-12-G1/8-B-C-W3 SKK-12-G1/4-B-C-W3 SKK-12-R1/8K-B-D-W3 SKK-12-R1/4K-B-D-W3 SKK-12-1/8NP-B-D-W3 SKK-12-1/4NP-B-D-W3 SKK-12-5/16UNF-B-E-W3 SKK-12-7/16UNF-B-E-W3 SKK-12-1/2UNF-B-E-W3 SKK-12-9/16UNF-B-E-W3 SKK-12-M12x1.5-B-E-W3 1 Special thread: buttress thread S12,65 x1,5 2 Suitable liquid / plastic sealant required. lternative materials and surface finishings are available upon request. Contact SUFF for further information. orque recommendations for Steel mating material. O-ring ype E For further information on Seal ypes, please see page Dimensional drawings: ll dimensions in mm (in). 42 Catalogue 7 Edition 10/2017

43 est Couplings SW (Hex ) SW B (Hex B) SW 14 (Hex.55) h est Coupling with Straight 24 Fitting SKK-12 ype G Ød l2 l1 Series PN Pipe Dimensions Weight Ordering Codes ( bar /PSI) ( mm /in) ( kg /lbs) ca. (Standard Option) 2 L S Ød ~l1 3 l2 h Hex Hex B per , , , , , , , , , , , , , , , , , , , , , , , , , , SKK-12-06L-B-G-W3-MS SKK-12-08L-B-G-W3-MS SKK-12-10L-B-G-W3-MS SKK-12-12L-B-G-W3-MS SKK-12-15L-B-G-W3-MS SKK-12-18L-B-G-W3-MS SKK-12-22L-B-G-W3-MS SKK-12-28L-B-G-W3-MS SKK-12-35L-B-G-W3-MS SKK-12-42L-B-G-W3-MS SKK-12-06S-B-G-W3-MS SKK-12-08S-B-G-W3-MS SKK-12-10S-B-G-W3-MS SKK-12-12S-B-G-W3-MS SKK-12-14S-B-G-W3-MS SKK-12-16S-B-G-W3-MS SKK-12-20S-B-G-W3-MS SKK-12-25S-B-G-W3-MS SKK-12-30S-B-G-W3-MS SKK-12-38S-B-G-W3-MS Ordering Codes *SKK*-12*-18L*-B*-G*-SK*-W3*-MS * ype est Coupling with Piston Valve SKK * Series SUFF est (Connection hread S12,65 x 1,5) * Outside ube Diameter acc. to dimension table -18 * Series Light Series L Heavy Series S * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Connection Straight 24 Fitting -G * Protection Cap Knurled protection cap Hexagonal protection cap -SK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) * ssembling / Fitting body only Kitting Fitting body supplied with -MS Cutting rings and union nuts Fitting body supplied with soft-sealing cutting rings and union nuts -MSV 1 Weight including cutting rings and union nuts. 2 Standard option: Fitting body supplied with Cutting rings and union nuts. 3 pproximate dimension in assembled condition. Port acc. to ISO / DIN 2353 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

44 est Couplings est Coupling with 24 aper / O-ring (DKO) SKK-12 ype K 30 (1.18) 33 (Hex 1.30) SW 17 (Hex.67) SW Ød l3 SW 17 (Hex.67) SW (Hex ) l3 Ød Version Version B Ordering Codes *SKK*-12*-18L*-B*-K*-GS*-SK*-W3 * ype est Coupling with Piston Valve SKK * Series SUFF est (Connection hread S12,65 x 1,5) * Outside ube Diameter acc. to dimension table -18 * Series Light Series L Heavy Series S * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Connection 24 aper / O-ring (DKO) -K * Design One-piece design (Version ) Screwed design (Version B) -GS * Protection Cap Knurled protection cap Hexagonal protection cap -SK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) Series PN Pipe Dimensions hread Version Weight Ordering Codes ( bar /PSI) ( mm /in) ( kg /lbs) ca. (Standard Option) L S Ød l3 Hex per ,5 14 6,40 M12 x 1, ,5 17 6,50 M14 x 1, ,5 19 7,90 M16 x 1, ,5 22 9,00 M18 x 1, ,70 M22 x 1,5 B , ,00 M26 x 1,5 B , ,70 M30 x 2 B ,70 M36 x 2 B ,50 M45 x 2 B ,80 M52 x 2 B ,5 17 6,60 M14 x 1, ,5 19 7,70 M16 x 1, ,5 22 8,80 M18 x 1, , ,50 M20 x 1, , ,40 M22 x 1,5 B ,70 M24 x 1,5 B ,80 M30 x 2 B ,20 M36 x 2 B ,70 M42 x 2 B ,20 M52 x 2 B SKK-12-06L-B-K-W3 SKK-12-08L-B-K-W3 SKK-12-10L-B-K-W3 SKK-12-12L-B-K-W3 SKK-12-15L-B-K-GS-W3 SKK-12-18L-B-K-GS-W3 SKK-12-22L-B-K-GS-W3 SKK-12-28L-B-K-GS-W3 SKK-12-35L-B-K-GS-W3 SKK-12-42L-B-K-GS-W3 SKK-12-06S-B-K-W3 SKK-12-08S-B-K-W3 SKK-12-10S-B-K-W3 SKK-12-12S-B-K-W3 SKK-12-14S-B-K-GS-W3 SKK-12-16S-B-K-GS-W3 SKK-12-20S-B-K-GS-W3 SKK-12-25S-B-K-GS-W3 SKK-12-30S-B-K-GS-W3 SKK-12-38S-B-K-GS-W3 With 24 aper / O-ring (DKO) Connection acc. to ISO / DIN 2353 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Dimensional drawings: ll dimensions in mm (in). 44 Catalogue 7 Edition 10/2017

45 est Couplings Bulkhead SSKK-12 SW (Hex) max. 12 (max..47) h SW (Hex) hread Dimensions Weight Ordering Codes ( mm /in) ( kg /lbs) ca. (Standard Option) h Hex per ,30 S SSKK-12-B-W3 1 Special thread: buttress thread S12,65 x1,5 Standard option: With Hexagon Lock Nut. lternative materials and surface finishings are available upon request. Contact SUFF for further information. Ordering Codes *SSKK*-12*-B*-SK*-W3 * ype Bulkhead with Piston Valve SSKK * Series SUFF est (Connection hread S12,65 x 1,5) * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Protection Cap Knurled protection cap Hexagonal protection cap -SK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) SW (Hex ) SW B (Hex B) Swivel Run ee with 37 JIC Connection SGV-JIC ype FM Ød 37 7/16-20 UNF l1 l2 Pipe JIC- Dimensions hread Weight Ordering Codes Ø Size ( mm /in) ( kg /lbs) ca. (Standard Option) inch Ø d l1 l2 Hex Hex B inch per 100 1/4 04 4,37 37,74 8, ,29 8,96 7/16 20 UNF SGV-7/16UNF-04-JIC1/4-FM-W66 3/8 06 7,54 40,01 9, ,46 9,60 9/16 18 UNF SGV-7/16UNF-06-JIC3/8-FM-W66 1/2 08 9,93 44,65 10, ,23 11,20 3/4 16 UNF SGV-7/16UNF-08-JIC1/2-FM-W66 5/ ,29 48,26 12,70 28,58 25,40 17,10 7/8 14 UNF SGV-7/16UNF-10-JIC1/2-FM-W66 3/ ,47 51,33 14,45 31,75 31,75 1-1/16 12 UN 20, SGV-7/16UNF-12-JIC3/4-FM-W ,44 57,30 15,09 38,10 38,10 1-5/16 12 UN 30, SGV-7/16UNF-16-JIC1-FM-W66 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Ordering Codes *SGV*-7/16UNF*-12*-JIC3/4*-FM*-W66 * ype Swivel Run ee SGV * Port Connection acc. to dimension table -7/16UNF * JIC Size acc. to dimension table -12 * Connection 37 JIC Connection -JIC * Outside ube Diameter acc. to dimension table 3/4 * Connection Female/Male hread -FM * Material Code Steel, zinc plated and -W66 hick-layer passivated Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

46 est Couplings est daptor SD-12 S12*1 S12*1 h h Version Version B Ordering Codes *SD*-12/20*-B*-W3 * ype est daptor SD * Connection ype Version -12/20 Version -12/15 Version B -12/10 * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) hread Dimensions Version Weight Ordering Codes ( mm /in) ( kg /lbs) ca. (Standard Option) h per 100 M16 x , M16 x 1,5 33 4, Plug in 31 1,80 B SD-12/20-B-W3 SD-12/15-B-W3 SD-12/10-B-W3 1 Special thread: buttress thread S12,65 x1,5 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Gauge daptor SM-12 Direct Gauge daptor SMD-12 max. 12 (max..47) SW (Hex ) SW (Hex ) h h hrough hole Ø 18 (.71) SW 19 (Hex.75) S12*1 S12*1 Gauge daptor SM-12 Direct Gauge daptor SMD-12 Ordering Codes *SM*-12*-G1/4*-B*-OR*-W3 * ype Gauge daptor SM * Series SUFF est (Connection hread S16,25 x 1,5) * hread acc. to dimension table -G1/4 * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Seal ype with O-ring -OR * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) hread Dimensions Weight Ordering Codes ( mm /in) ( kg /lbs) ca. (Standard Option) h Hex per 100 G1/ , G1/ , /4 NP , /2 NP , G1/ , G1/ , /4 NP , /2 NP , SM-12-G1/4-B-OR-W3 SM-12-G1/2-B-OR-W3 SM-12-1/4NP-B-W3 SM-12-1/2NP-B-W3 SMD-12-G1/4-B-OR-W3 SMD-12-G1/2-B-OR-W3 SMD-12-1/4NP-W3 SMD-12-1/2NP-W3 1 Special thread: buttress thread S12,65 x1,5 Standard option - SM-12: With Hexagon Lock Nut. lternative materials and surface finishings are available upon request. Contact SUFF for further information. Snubber on request. Dimensional drawings: ll dimensions in mm (in). 46 Catalogue 7 Edition 10/2017

47 est Couplings Catalogue 7 Edition 10/

48 est Couplings est Coupling with Ball Check SMK Catalogue 7 Edition 10/2017

49 est Couplings est Coupling with Ball Check SMK-10 Internal Seals B Ball C Spring E B D C D Seal at Male hreaded Stud E Port Connection Fast Coupling for Monitoring and control of pressure Venting Sampling in high- and low-pressure systems dvantages Leak proof connection before Ball Check is open Simple connection to measurement, control and switching devices Working Pressure Max. working pressure 400 bar / 5801 PSI For SMK ype G and K the recommended working pressure of fitting manufacturer should be noted. Materials Metal Parts: Standard material: Steel, zinc/nickel-plated = W3 Seal ypes: B = NBR (Buna-N ) (emperature range -20 C C / -4 F F) Note: Internal sealings made of FKM/FPM, even for standard NBR-type. Media V = FKM (Viton ) (emperature range -20 C C / -4 F F) E = EPDM Ethylene Propylene Diene Monomer Rubber (for Brake fluid, emperature range -40 C C / -40 F F) Suitable for hydraulic oils and other Mineral oil based fluids (Check compatibility of seal material) For use with other liquid media please contact SUFF Ball: Stainless Steel Strap: Polyethylene SMK-10 est Coupling with Male hreaded Stud SMK-10 ype G est Coupling with Straight 24 Fitting SMK-10 ype K est Coupling With 24 aper / O-ring (DKO) Catalogue 7 Edition 10/

50 est Couplings est Coupling with Male hreaded Stud SMK-10 Ordering Codes *SMK*-10*-M10x1*-B*-*-W3 * ype est Coupling with Ball Check SKK * Series SUFF est Plug In System * Port Connection acc. to dimension table -M10x1 * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Seal ype O-ring ype - aper ype D -D * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Gauge daptor SM-10 Stainless Steel V4 - -W (ISI 316 i) hread Seal ype Working Dimensions orque Weight Ordering Codes Pressure ( mm /in) ( N m /ft lb) ca. ( kg /lbs) ca. (Standard Option) ( bar /PSI) h1 h2 Hex hread per ,5 8, ,50 M8 x ype ,5 9, ,70 M10 x , ,70 R1/8 K ype D* SMK-10-M8x1-B--W3 SMK-10-M10x1-B--W3 SMK-10-R1/8K-B-D-W3 1 Suitable liquid / plastic sealant required. lternative materials and surface finishings are available upon request. Contact SUFF for further information. orque recommendations for Steel mating material. Seal ype O-ring ype aper ype D 1 For further information on Seal ypes, please see page max. 12 SW (Hex) SW (Hex ) h h2 h1 SW19 (Hex.75) M16 hrough hole Ø 18 (.71) Ordering Codes *SM*-10*-G1/4*-B*-OR*-W3 * ype Gauge daptor SM * Series SUFF est Plug In System * hread acc. to dimension table -G1/4 * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Seal ype with O-ring -OR * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) hread Dimensions Weight Ordering Codes ( mm /in) ( kg /lbs) ca. (Standard Option) h Hex per 100 G1/ , G1/ , /4 NP , /2 NP , SM-10-G1/4-B-OR-W3 SM-10-G1/2-B-OR-W3 SM-10-1/4NP-B-W3 SM-10-1/2NP-B-W3 Standard option: With Hexagon Lock Nut. lternative materials and surface finishings are available upon request. Contact SUFF for further information. Snubber on request. Dimensional drawings: ll dimensions in mm (in). 50 Catalogue 7 Edition 10/2017

51 est Couplings est Coupling with Straight 24 Fitting SMK-10 ype G SW 12 (Hex.47) SW SW B (Hex ) (Hex B) h Ød l2 l1 Series PN Pipe Dimensions Weight Ordering Codes ( bar /PSI) ( mm /in) ( kg /lbs) ca. (Standard Option) 2 L S Ø d ~l1 3 l2 h Hex Hex B per , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , SMK-10-06L-B-G-W3-MS SMK-10-08L-B-G-W3-MS SMK-10-10L-B-G-W3-MS SMK-10-12L-B-G-W3-MS SMK-10-15L-B-G-W3-MS SMK-10-18L-B-G-W3-MS SMK-10-22L-B-G-W3-MS SMK-10-28L-B-G-W3-MS SMK-10-35L-B-G-W3-MS SMK-10-42L-B-G-W3-MS SMK-10-06S-B-G-W3-MS SMK-10-08S-B-G-W3-MS SMK-10-10S-B-G-W3-MS SMK-10-12S-B-G-W3-MS SMK-10-14S-B-G-W3-MS SMK-10-16S-B-G-W3-MS SMK-10-20S-B-G-W3-MS SMK-10-25S-B-G-W3-MS SMK-10-30S-B-G-W3-MS SMK-10-38S-B-G-W3-MS Ordering Codes *SMK*-10*-18L*-B*-G*-W3*-MS * ype est Coupling with Ball Check SMK * Series SUFF est Plug In System * Outside ube Diameter acc. to dimension table -18 * Series Light Series L Heavy Series S * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Connection Straight 24 Fitting -G * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) * ssembling / Fitting body only Kitting Fitting body supplied with -MS Cutting rings and union nuts Fitting body supplied with soft-sealing cutting rings and union nuts -MSV 1 Weight including cutting rings and union nuts. 2 Standard option: Fitting body supplied with Cutting rings and union nuts. 3 pproximate dimension in assembled condition. Port acc. to ISO / DIN 2353 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

52 est Couplings est Coupling with 24 aper / O-ring (DKO) SMK-10 ype K SW 12 (Hex.47) 17,5 (.69) SW 12 (Hex.47) (.69) l3 17,5 SW (Hex ) Ød l3 SW (Hex ) Ød Version Version B Ordering Codes *SMK*-10*-18L*-B*-K*-GS*-W3 * ype est Coupling with Ball Check SMK * Series SUFF est Plug In System * Outside ube Diameter acc. to dimension table -18 * Series Light Series L Heavy Series S * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Connection 24 aper / O-ring (DKO) -K * Design One-piece design (Version ) Screwed design (Version B) -GS * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) Series PN Pipe Dimensions hread Version Weight Ordering Codes ( bar /PSI) ( mm /in) ( kg /lbs) ca. (Standard Option) L S Ø d l3 Hex per ,5 14 4,60 M12 x 1, ,5 17 5,30 M14 x 1, ,5 19 6,50 M16 x 1, ,5 22 8,00 M18 x 1, ,10 M22 x 1,5 B , ,90 M26 x 1,5 B , ,30 M30 x 2 B ,10 M36 x 2 B ,75 M45 x 2 B ,10 M52 x 2 B ,5 17 5,10 M14 x 1, ,5 19 6,10 M16 x 1, ,5 22 7,80 M18 x 1, ,5 24 9,80 M20 x 1, ,5 27 8,60 M22 x 1,5 B ,20 M24 x 1,5 B ,00 M30 x 2 B ,70 M36 x 2 B ,80 M42 x 2 B ,50 M52 x 2 B SMK-10-06L-B-K-GS-W3 SMK-10-08L-B-K-GS-W3 SMK-10-10L-B-K-GS-W3 SMK-10-12L-B-K-GS-W3 SMK-10-15L-B-K-GS-W3 SMK-10-18L-B-K-GS-W3 SMK-10-22L-B-K-GS-W3 SMK-10-28L-B-K-GS-W3 SMK-10-35L-B-K-GS-W3 SMK-10-42L-B-K-GS-W3 SMK-10-06S-B-K-GS-W3 SMK-10-08S-B-K-GS-W3 SMK-10-10S-B-K-GS-W3 SMK-10-12S-B-K-GS-W3 SMK-10-14S-B-K-GS-W3 SMK-10-16S-B-K-GS-W3 SMK-10-20S-B-K-GS-W3 SMK-10-25S-B-K-GS-W3 SMK-10-30S-B-K-GS-W3 SMK-10-38S-B-K-GS-W3 With 24 aper / O-ring (DKO) Connection acc. to ISO / DIN 2353 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Dimensional drawings: ll dimensions in mm (in). 52 Catalogue 7 Edition 10/2017

53 est Couplings Special est Coupling Solutions SUFF est Pressure est Connection for Compressed-ir Pneumatic Braking Equipment (according to ISO 3583) est Coupling with Female Connection Port Banjo Fitting with est Coupling Gauge daptor with est Coupling riple Manifold Block with est Couplings Custom-designed test coupling solutions in addition to the Original-SUFF-est range according to customers specifications or based on SUFF developments. If you have similar requirements please contact SUFF. Catalogue 7 Edition 10/

54

55 est daptors est daptors hread daptor SRS-20 hread daptor SRS B Welding daptor SS djustable Gauge Fitting EMV Pressure est Kit 59 Catalogue 7 Edition 10/

56 est daptors hread daptor SRS-20 M10x1 B SW (Hex) h1 h2 Ordering Codes *SRS*-20*-M12x1.5*-B*-C*-W3 * ype hread daptor SRS * Series SUFF est (ll sizes) * Port Connection acc. to dimension table -M12x1.5 * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Seal ype Metal Joint ype B -B Elastomeric Sealing ype C -C aper ype D -D O-ring ype E -E * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Seal ype Stainless Steel V4 - -W (ISI 316 i) Metal Joint ype B Elastomeric Sealing ype C aper ype D 1 O-ring ype E For further information on Seal ypes, please see page hread Seal ype Dimensions Weight Ordering Codes ( mm /in) ( kg /lbs) ca. (Standard Option) h1 h2 Hex per 100 M10 x 1 15,5 8,5 17 2, M12 x 1, , M14 x 1, , M16 x 1, , ,20 M18 x 1, ype B 10, ,20 M22 x 1, G1/8 15, , G1/ , G3/8 10, , G1/2 10, , M12 x 1, , M14 x 1, , M18 x 1, , G1/8 ype C , G1/ , G3/8 10, , G1/2 10, , R1/4 K , R3/8 K , R1/2 K ype D , /4 NP , /2 NP , /16 20 UNF 9 9,1 17 2, /2 20 UNF 15 9,2 17 2, /16 18 UNF 15, , ,50 7/8 14 UNF ype E 14, ,90 M14 x 1, M16 x 1,5 8,5 12,5 22 3, M22 x 1, , M27 x ,5 32 7, SRS-20-M10x1-B-W3 SRS-20-M12x1.5-B-W3 SRS-20-M14x1.5-B-W3 SRS-20-M16x1.5-B-W3 SRS-20-M18x1.5-B-W3 SRS-20-M22x1.5-B-W3 SRS-20-G1/8-B-W3 SRS-20-G1/4-B-W3 SRS-20-G3/8-B-W3 SRS-20-G1/2-B-W3 SRS-20-M12x1.5-B-C-W3 SRS-20-M14x1.5-B-C-W3 SRS-20-M18x1.5-B-C-W3 SRS-20-G1/8-B-C-W3 SRS-20-G1/4-B-C-W3 SRS-20-G3/8-B-C-W3 SRS-20-G1/2-B-C-W3 SRS-20-R1/4K-D-W3 SRS-20-R3/8K-D-W3 SRS-20-R1/2K-D-W3 SRS-20-1/4NP-D-W3 SRS-20-1/2NP-D-W3 SRS-20-7/16UNF-B-E-W3 SRS-20-1/2UNF-B-E-W3 SRS-20-9/16UNF-B-E-W3 SRS-20-7/8UNF-B-E-W3 SRS-20-M14x1.5-B-E-W3 SRS-20-M16x1.5-B-E-W3 SRS-20-M22x1.5-B-E-W3 SRS-20-M27x2-B-E-W3 Dimensional drawings: ll dimensions in mm (in). 1 Suitable liquid / plastic sealant required. lternative materials and surface finishings are available upon request. Contact SUFF for further information. 56 Catalogue 7 Edition 10/2017

57 est daptors hread daptor SRS-15 SW (Hex) G1/4 B h2 h1 hread Seal ype Dimensions Weight Ordering Codes ( mm /in) ( kg /lbs) ca. (Standard Option) h1 h2 Hex per 100 M14 x 1, , M16 x 1, , ,00 M18 x 1, ype B 10, ,40 M20 x 1, G3/ , G1/2 10, , M14 x 1, , ,60 M16 x 1, ype C ,10 M18 x 1, ,86 G3/ , SRS-15-M14x1.5-B-W3 SRS-15-M16x1.5-B-W3 SRS-15-M18x1.5-B-W3 SRS-15-M20x1.5-B-W3 SRS-15-G3/8-B-W3 SRS-15-G1/2-B-W3 SRS-15-M14x1.5-B-C-W3 SRS-15-M16x1.5-B-C-W3 SRS-15-M18x1.5-B-C-W3 SRS-15-G3/8-B-C-W3 Ordering Codes *SRS*-15*-M14x1.5*-B*-C*-W3 * ype hread daptor SRS * Series SUFF est (ll sizes) * Port Connection acc. to dimension table -M14x1.5 * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Seal ype Metal Joint ype B -B Elastomeric Sealing ype C -C * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) lternative materials and surface finishings are available upon request. Contact SUFF for further information. Seal ype Metal Joint ype B Elastomeric Sealing ype C For further information on Seal ypes, please see page Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

58 est daptors Welding daptor SS B 45 h Ød Ordering Codes *SS*-M10x1*-W2 * ype Welding daptor SS * Port Connection acc. to dimension table -M10x1 * Material Code Steel, untreated -W1 Steel, phosphated -W2 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) hread Port Dimensions Weight Ordering Codes Connection ( mm /in) ( kg /lbs) ca. (Standard Option) h Ød per 100 M10 x 1 ype (p. 74) , G1/ , G1/4 ype B/C (p. 75) , G3/ , /4 NP ype D (p. 76) , /2 20 UNF ype E (p. 77) , SS-M10x1-W2 SS-G1/8-W2 SS-G1/4-W2 SS-G3/8-W2 SS-1/4NP-W2 djustable Gauge Fitting EMV 1 SW (Hex) h SS-1/2UNF-W2 lternative materials and surface finishings are available upon request. Contact SUFF for further information. 2 Ordering Codes *EMV*-G1/4/G1/2*-B*-OR*-B*-C*-W3 * ype djustable EMV Gauge Fitting * Port Connection acc. to dimension table -G1/4/G1/2 * Seal Material NBR (Buna-N ) -B FKM (Viton ) -V EPDM -E * Seal ype (Female) with O-ring -OR * Seal Material NBR (Buna-N ) -B * Seal ype Elastomeric Sealing ype C -C * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) Dimensions Weight Ordering Codes ( mm /in) ( kg /lbs) ca. (Standard Option) 1 2 h Hex per 100 G1/4 G1/ , G1/4 G1/ , G1/2 G1/ , G1/2 G1/2 55, , EMV-G1/4-B-OR-B-C-W3 EMV-G1/4/G1/2-B-OR-B-C-W3 EMV-G1/2/G1/4-B-OR-B-C-W3 EMV-G1/2-B-OR-B-C-W3 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Dimensional drawings: ll dimensions in mm (in). 58 Catalogue 7 Edition 10/2017

59 Pressure est Kit Pressure est Kit (analog) SMB In addition to the individual SPG gauges, the SUFF Pressure Gauges are also available as a part of a Pressure est Kit SMB. he SMB Pressure est Kits are assembled in various versions, in accordance with customer wishes. B ll Pressure est Kits are supplied in a handy case with custom-designed foam inserts. Further information on these products and components please see Catalogue 8 - SUFF Diagtronics. SMB-20-3-xxx/xxx-W3 or SMB-15-3-xxx/xxx-W3 SMB-20/100-1-xxx-W3 or SMB-15/100-1-xxx-W3 Note: ll test kits are available as SMB-15 version. Pressure est Kit (digital) SMB-DIGI In addition to the individual SPG-DIGI devices, the SUFF Digital Pressure Gauges are also available as a part of a Pressure est Kit SMB-DIGI. he SMB-DIGI Pressure est Kits are assembled in various versions, in accordance with customer wishes. ll Pressure est Kits are supplied in a handy case with custom-designed foam inserts. Further information on these products and components please see Catalogue 8 - SUFF Diagtronics. SMB-DIGI Catalogue 7 Edition 10/

60

61 est Hoses and Connectors est Hoses and Connectors est Hose SMS / SGS echnical Data est Hose / Hose End Ordering Codes SMS / SGS / HE 63 C Hose End HE Hose Connector SSV 70 Sampling Hose daptor SH 70 Catalogue 7 Edition 10/

62 est Hoses and Connectors echnical Data est Hose C B C D Nominal Bore (DN) (mm) DN 2 DN 4 Max. Working Pressure (PN) (bar / PSI) 400 / / / / 9135 Min. Burst Pressure (bar / PSI) 1100 / / / / esting Pressure (bar / PSI) 600 / / / / at 0 C / 32 F (122 %) 488 / / / / at 30 C / 86 F (110 %) 440 / / / / Pressure Rating in bar / PSI at 50 C / 122 F (100 %) (bar / PSI) 400 / / / / 9137 at Indicated emperature at 80 C / 176 F (86 %) 344 / / / / 7861 at 100 C / 212 F (77 %) 308 / / / / 7034 Working emperature ( C / F) -35 C C / -31 F F (momentary +120 C / +248 F) Inside Diameter (mm / in) 2 /.08 4 /.16 Outside Diameter (mm / in) 5 /.20 8,6 /.34 Bending Radius at working pressure 20 / / 1.57 (mm / in) at -20 C / 4 F 30 / / 2.36 Max. Coil Length (m / ft) 20 / Weight / m (g / oz) 16 / / 1.35 Inner / Outer ube P Reinforcement Synthetic Fibre Standard hose end material is Steel 11 S Mn Pb 30 (1.0718), zinc/ nickel-plated (ype 15: Steel, black zinc/nickel-plated) Stainless Steel: V2 (1.4305/ISI 303), V4 (1.4571/ISI 316i) on request SUFF est Hoses (Selection) SUFF-est 20/20 SUFF-est 15/15 SUFF-est 12/12 2 SUFF-est 10/10 Gauge daptor 2 Special thread: buttress thread S12,65 x 1,5 Dimensional drawings: ll dimensions in mm (in). 62 Catalogue 7 Edition 10/2017

63 est Hoses and Connectors Ordering Codes SUFF est Hose L SMS 1 20 / M W3 C Hose End 1 (see page 64-69) Hose End 2 (see page 64-69) Length DN Material Hose End J.... Length mm (*see L above) 15 S.... D K.... B L.... U.... M.... G.... P.... N.... F.... etc. W.... C for gaseous media type SGS - est hoses are perforated 2 ype C and D - are perforated only specify when 2 different hose ends are required Standard Length see table below. = DN bar / 5802 PSI B = DN bar / 9137 PSI C 2 = DN bar / 4931 PSI D 2 = DN bar / 9137 PSI Standard hose end material is Steel 11 S Mn Pb 30 (1.0718), zinc/nickel-plated = W3 ype 15: Steel, black zinc/nickel-plated = W3 Stainless Steel: V2 (1.4305/ISI 303)= W4, on request V4 (1.4571/ISI 316i) = W5, on request Standard Length L* mm in Bending protection on request. Ordering Codes Hose End HE 20 W3 Hose End (see page 64-69) DN Material Hose End J.... Standard hose end material is Steel 15 S.... D S Mn Pb 30 (1.0718), zinc/nickel-plated = W3 12 K.... B.... = DN 2 ype 15: Steel, black zinc/nickel-plated = W3 10 L.... U.... C = DN 4 Stainless Steel: M.... G.... P.... V2 (1.4305/ISI 303) = W4, on request N.... F.... etc. V4 (1.4571/ISI 316i) = W5, on request W.... C.... Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

64 est Hoses and Connectors SUFF Hose End Hose End Description Hex (mm /in) DN Working Pressure ( bar /PSI) 1 ype M16 x 2 20 C SUFF-est Screw-type suitable for test points / M16 x 1,5 and S12,65 x 1,5 12 M16 x 2 20 SUFF-est Screw-type 90 elbow suitable for test points 630 / M16 x 1,5 2 O S12,65 x 1,5 12 M16 x 2 20 SW/Hex SUFF-est Screw-type 90 elbow suitable for test points (short wire version) 630 / M16 x 1, OX S12,65 x 1,5 12 SUFF-est Plug in-type Plug In System / SW / Hex Gauge adaptor BSP-thread for G3/8, G1/2, M14 x 1,5 and M20 x 1,5 swivel nut like type N G1/ / / and G1/ /2 G3/ M 3/8 630 / M14 x 1, M20 x 1, he indicated working pressure applies only to the Hose End. he actual working pressure depends on the est Hose used. Dimensional drawings: ll dimensions in mm (in). 64 Catalogue 7 Edition 10/2017

65 est Hoses and Connectors SUFF Hose End Hose End Description Hex (mm /in) DN Working Pressure ( bar /PSI) 1 ype G1/ /4 SW/Hex 90 elbow gauge adaptor BSP-thread for G1/2 swivel nut like type N 2 and / 9137 W C G1/ /2 SW/Hex 1/4 NP /4 Gauge adaptor NP-thread for 1/4 NP swivel nut like type M 2 N 1/2 NP /2 90 elbow gauge adaptor NP-thread for 1/2 NP swivel nut like type N 1/4 NP and 4 1/4 1/2 NP /2 SW/Hex Ød (see (siehe ) ) 20 (.79) Standpipe for compression ring fittings according to ISO / DIN 2353 Note: Standpipe version is not in accordance with the state of the art. Use at own risk. We recommend the use of the series K, R or L. 4 LL 2 6 L - 6 S 100 / L - 8 S and 08 4 S 10 L - 10 S 630 / L - 12 S /4 2 and /4 Ød (see (siehe ) ) Standpipe for compression ring fittings according to ISO / DIN elbow Note: Standpipe version is not in accordance with the state of the art. Use at own risk. We recommend the use of the series K, R or L. 6 L - 6 S 2 and / L - 8 S 08 SG 06 1 he indicated working pressure applies only to the Hose End. he actual working pressure depends on the est Hose used. Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

66 est Hoses and Connectors SUFF Hose End Hose End Description Hex (mm /in) M12 x 1, DN Working Pressure ( bar /PSI) 1 ype 06L C SW/Hex Seal with O-ring for 24 cone fitting according to ISO / DIN 2353 c/w swivel nut M14 x 1, / 08L M16 x 1, L M18 x 1, L and K M14 x 1, S M16 x 1, / 08S M18 x 1, S M20 x 1, S SW/Hex Seal with O-ring for 24 cone fitting according to ISO / DIN 2353 c/w swivel nut 45 elbow M12 x 1, M14 x 1, and / / 4568 R 06L 06S M12 x 1, L SW/Hex Seal with O-ring for 24 cone fitting according to ISO / DIN 2353 c/w swivel nut 90 elbow 315 / M14 x 1, L 4568 M16 x 1, L and L 4 M14 x 1, S 630 / M16 x 1, S M18 x 1, S M12 x 1, / Male thread according to DIN 3852-B G1/ G1/ and / / 9137 G 1/8 1/4 SW/Hex G1/ / /2 SW/Hex 1/8 NP / /8 Male thread NP according to NSI-standard 2 and 4 F 1/4 NP / /4 1 he indicated working pressure applies only to the Hose End. he actual working pressure depends on the est Hose used. Dimensional drawings: ll dimensions in mm (in). 66 Catalogue 7 Edition 10/2017

67 est Hoses and Connectors SUFF Hose End Hose End Description Hex (mm /in) DN Working Pressure ( bar /PSI) 1 ype M12 x 1, L SW/Hex 315 / 4568 Male thread for 24 cone fitting according to ISO / DIN 2353 M14 x 1, L 2 and C 4 M14 x 1, S 630 / 9137 C M16 x 1, S SW/Hex 7/16 20 UNF /4 Male thread according to SE J / 1/2 20 UNF and J 5/ /16 18 UNF /8 M12 x 1, L SW/Hex Universal sealing head with swivel nut for 24 cone fitting according to ISO / DIN 2353 M14 x 1, / 08L M16 x 1, L M18 x 1, L and D M14 x 1, S M16 x 1, / 08S M18 x 1, S M20 x 1, S SW/Hex Universal sealing head with swivel nut for 24 cone fitting according to ISO / DIN elbow M16 x 1, M18 x 1, and / / 9137 Q 10L 10S SW/Hex G1/ /8 Sealing head with swivel nut for cone fitting according to DIN EN 560 B G1/ and 4 1/4 1 he indicated working pressure applies only to the Hose End. he actual working pressure depends on the est Hose used. Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

68 est Hoses and Connectors SUFF Hose End Hose End Description Hex (mm /in) DN Working Pressure ( bar /PSI) 1 ype SW/Hex 7/16 20 UNF /4 C 37 Sealing head with swivel nut according to SE J cone / 1/2 20 UNF and U 5/ /16 18 UNF /8 SW/Hex 45 Sealing head with swivel nut according to SE J cone 7/16 20 UNF UR 1/4 SW/Hex Sealing head with swivel nut according to SE J cone 90 elbow 7/16 20 UNF and / 5076 E 1/4 37 SW/Hex Sealing head with swivel nut according to SE J cone 90 elbow 7/16 20 UNF ER 1/4 45 SW/HEX est hose for air brake systems according to ISO 3583 M16 x 1, P 02 1 he indicated working pressure applies only to the Hose End. he actual working pressure depends on the est Hose used. Dimensional drawings: ll dimensions in mm (in). 68 Catalogue 7 Edition 10/2017

69 est Hoses and Connectors SUFF Hose End Hose End Description Hex (mm /in) DN Working Pressure ( bar /PSI) 1 ype SW/Hex Sealing head with swivel nut 60 cone G1/ and / 9137 H 1/4 C SW/Hex 9/16 18 UNF /16 Screw-type ORFS according to SE J /16 16 UN /16 SW/Hex Screw-type ORFS according to SE J elbow 11/16 16 UN and 4 V 11/16 M16 x 2 20 Hose end with integrated check valve / 9137 RV M16 x 1, he indicated working pressure applies only to the Hose End. he actual working pressure depends on the est Hose used. Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

70 est Hoses and Connectors Hose Connector SSV SW (Hex) C Ordering Codes *SSV*-20*-W3 * ype Hose Connector SSV * Series SUFF est SUFF est SUFF est * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) hread Dimensions Weight Ordering Codes ( mm /in) ( kg /lbs) ca. (Standard Option) l1 l2 Hex per 100 M16 x 2 42,5 18,5 17 4, M16 x 1,5 42,5 18,5 17 4, S12,65 x 1, ,5 14 2, SSV-20-W3 SSV-15-W3 SSV-12-W3 Sampling Hose daptor SH L1 ØD2 ØD1 l2 l1 Stainless Steel V4 - -W (ISI 316 i) lternative materials and surface finishings are available upon request. Contact SUFF for further information. L3 L2 Ordering Codes *SH*-20*-5.5MM*-W3 * ype Sampling Hose daptor SH * Series SUFF est * Size Hose nipples -5.5MM * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2 - -W (ISI 303) Stainless Steel V4 - -W (ISI 316 i) Dimensions Weight Ordering Codes ( mm /in) ( kg /lbs) ca. (Standard Option) Ød1 Ød2 l1 l2 l3 per , ,36 M16 x SH MM-W3 lternative materials and surface finishings are available upon request. Contact SUFF for further information. Dimensional drawings: ll dimensions in mm (in). 70 Catalogue 7 Edition 10/2017

71 est Hoses and Connectors C Catalogue 7 Edition 10/

72

73 echnical ppendix Port Dimensions and Seal ypes ype 74 ype B 75 ype C 75 D ype D 76 ype E 77 Catalogue 7 Edition 10/

74 echnical ppendix Port Dimensions and Seal ypes ype with O-ring 3 D Factory standard d1 30 0,5 2,5 Port Factory standard t1 t2 ype Dimensions (mm/in) hread d1 +0,1 t1 min. t2 min. M8 x 1 9, , M10 x 1 11, , Dimensional drawings: ll dimensions in mm (in). 74 Catalogue 7 Edition 10/2017

75 echnical ppendix Port Dimensions and Seal ypes ype B ype C 1 ØD3 1 ØD7 Metallic Sealing Edge Metric Parallel hread DIN (Form B) / ISO (ype B) Whitworth Parallel Pipe hread DIN (Form B) / ISO (ype B) ØD4 Profile Sealing Ring Metric Parallel hread ISO (ype E) Whitworth Parallel Pipe hread ISO (ype E) D W C 1 C or B1 Port (Parallel hread) for Male Studs with Metric Parallel hread DIN (Form X) / ISO for Male Studs with Whitworth Parallel Pipe hread DIN (Form X) / ISO Dimensions (mm/in) hread 1 1 D3 D7-0,2 D4 small min D4 wide min 1 max B1 min W M 10 x , , M 12 x 1, , ,5 12 0, M 14 x 1, , ,5 12 0, M 16 x 1, , ,5 12 0, M 18 x 1, , , M 20 x 1, , , M 22 x 1, , ,5 14 0, G 1/ , ,5 0, G 1/ , ,5 12,5 0, G 3/ , ,5 0, G 1/ , ,5 15 0, ppendix in the thread description does not apply to (female) threaded ports. Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

76 echnical ppendix Port Dimensions and Seal ypes ype D 1 3 D aper hread National Pipe hread (NP) NSI/SME B aper hread Metric aper hread DIN (Form C) Whitworth aper Pipe hread DIN (Form C) B2 B1 Port (aper hread) B2 B1 Port (Parallel hread) for Male Studs with National Pipe NP hread NSI/SME B for Male Studs with Metric aper hread DIN (Form Z) for Male Studs with Whitworth aper Pipe hread DIN (Form Z) Dimensions (mm/in) hread 1 hread 3 hread 4 B1 min B2 min 1/8-27 NP 1/8-27 NP 6,9.27 1/4-18 NP 1/4-18 NP /2-14 NP 1/2-14 NP 13,6.54 R 1/8 keg. Rp 1/8 8,5 5, R 1/4 keg. Rp 1/4 12,5 8, R 3/8 keg. Rp 3/8 12,5 8, R 1/2 keg. Rp 1/2 16,5 10, Suitable liquid / plastic sealant required to achieve leak-tightness. Dimensional drawings: ll dimensions in mm (in). 76 Catalogue 7 Edition 10/2017

77 echnical ppendix Port Dimensions and Seal ypes ype E Identification Groove for Metric Parallel hread 1 ØD5 O-ring without Retaining Ring (Non-djustable) Metric Parallel hread ISO /-3 UN/UNF hread ISO /-3 D W 3.2 R0.3 R D4 D C 45 ±5 2 B2 B1 Port (Parallel hread) Ports with Metric Parallel hread marked with M (optional) for Male Studs with Metric Parallel hread ISO for Male Studs with UN/UNF hread ISO Dimensions (mm/in) hread 1 1 D5 D4 small min D4 wide min D2 +0,1 (UNF: ±0,05) 1 max 2 +0,4 B1 min B2 min W ±1 M 10 x 1 13, ,1 1 1,6 11, M 12 x 1,5 16, ,8 1,5 2, , M 14 x 1,5 18, ,8 1,5 2, , M 16 x 1,5 21, ,8 1,5 2,4 15, M 22 x 1,5 26, ,8 2 2, , M 27 x 2 31, ,4 2 3, /16-24 UNF-2 11,1 17 9,1 1,6 1, /16-20 UNF-2 14, ,45 1,6 2, , /2-20 UNF ,05 1,6 2, , /16-18 UNF-2 17, ,7 1,6 2,5 15,5 12, /4-16 UNF-2 21, ,65 2,4 2,5 17,5 14, /8-14 UNF-2 26, ,0 2,4 2, ,7 15 1, ppendix -2B instead of -2 applies for (female) threaded ports. Dimensional drawings: ll dimensions in mm (in). Catalogue 7 Edition 10/

78

79 ppendix Product-Specific bbreviations Global Contact Directory Catalogue 7 Edition 10/

80 ppendix Product-Specific bbreviations bbreviation Product Category Product Description Page EMV est daptors djustable Gauge Fitting 59 HE est Hoses and Connectors SUFF est Screw-type 64 HE est Hoses and Connectors SUFF est Plug in-type 64 HE- est Hoses and Connectors Gauge adaptor NP-thread, 90 elbow, Hose End 65 HE-B est Hoses and Connectors Sealing head with swivel nut for cone fitting according to DIN EN 560, Hose Ends 67 HE-C est Hoses and Connectors Male thread for 24 cone fitting according to ISO / DIN 2353, Hose End 67 HE-D est Hoses and Connectors Universal sealing head with swivel nut for 24 cone fitting according to ISO / DIN 2353, Hose End 67 HE-E est Hoses and Connectors Sealing head with swivel nut according to SE J 516, 37 cone, 90 elbow, Hose End 68 HE-ER est Hoses and Connectors Sealing head with swivel nut according to SE J 516, 45 cone, 90 elbow, Hose End 68 HE-F est Hoses and Connectors Male thread NP according to NSI Standard, Hose End 66 HE-G est Hoses and Connectors Male thread according to DIN 3852-B, Hose End 66 HE-H est Hoses and Connectors Sealing head with swivel nut, 60 cone, Hose End 69 HE-J est Hoses and Connectors Male thread according to SE J 514, Hose End 67 HE-K est Hoses and Connectors Seal with O-ring for 24 cone fitting according to ISO / DIN 2353,c/w swivel nut, Hose End 66 HE-L est Hoses and Connectors Seal with O-ring for 24 cone fitting according to ISO / DIN 2353, c/w swivel nut, 90 elbow, Hose End 66 HE-M est Hoses and Connectors Gauge adaptor BSP-thread, Hose End 64 HE-N est Hoses and Connectors Gauge adaptor NP-thread, Hose End 65 HE-O est Hoses and Connectors SUFF est Screw-type, 90 elbow, suitable for test points, Hose End 64 HE-OX est Hoses and Connectors SUFF est Screw-type, 90 elbow, suitable for test points (short wire version), Hose End 64 HE-P est Hoses and Connectors est hose for air brake systems, Hose End 68 HE-Q est Hoses and Connectors Universal sealing head with swivel nut for 24 cone fitting according to ISO / DIN 2353, 90 elbow, Hose End 67 HE-R est Hoses and Connectors Seal with O-ring for 24 cone fitting according to ISO / DIN 2353, c/w swivel nut, 45 elbow, Hose End 66 HE-RV est Hoses and Connectors Hose End with integrated check valve, Hose End 69 HE-S est Hoses and Connectors Standpipe for compression ring fittings according to ISO / DIN 2353, Hose End 65 HE-SG est Hoses and Connectors Standpipe for compression ring fittings according to ISO / DIN 2353, 90 elbow, Hose End 65 HE- est Hoses and Connectors Screw-type ORFS according to SE J 1453, Hose End 69 HE-U est Hoses and Connectors Sealing head with swivel nut according to SE J 514, 37 cone, Hose End 68 HE-UR est Hoses and Connectors Sealing head with swivel nut according to SE J 516, 45 cone, Hose End 68 HE-V est Hoses and Connectors Screw-type ORFS according to SE J 1453, 90 elbow, Hose End 69 HE-W est Hoses and Connectors Gauge adaptor BSP-thread, 90 elbow, Hose End 65 SD-12 est Coupling SUFF est 12 est daptor 46 SD-15 est Coupling SUFF est 15 est daptor 38 SD-20 est Coupling SUFF est 20 est daptor 24 SS est daptors Welding daptor 58 SGS est Hoses and Connectors est Hose 63 SGV-JIC ype FM est Coupling SUFF est 20 Swivel Run ee with 37 JIC Connection 22 SGV-JIC ype FM est Coupling SUFF est 15 Swivel Run ee with 37 JIC Connection 37 SGV-JIC ype FM est Coupling SUFF est 12 Swivel Run ee with 37 JIC Connection 45 SH est Hoses and Connectors Sampling Hose daptor 70 SKK-12 est Coupling SUFF est 12 est Coupling with Male hreaded Stud 42 SKK-12 ype G est Coupling SUFF est 12 est Coupling with Straight 24 Fitting 43 SKK-12 ype K est Coupling SUFF est 12 est Coupling with 24 aper / O-ring (DKO) 44 SKK-15 est Coupling SUFF est 15 Bulkhead 37 SKK-20 est Coupling SUFF est 20 est Coupling with Male hreaded Stud 28 SKK-20 ype G est Coupling SUFF est 20 est Coupling with Straight 24 Fitting 29 SKK-20 ype K est Coupling SUFF est 20 est Coupling with 24 aper / O-ring (DKO) 31 SM-10 est Coupling SUFF est 10 Gauge daptor 50 SM-12 est Coupling SUFF est 12 Gauge daptor 46 SM-15 est Coupling SUFF est 15 Gauge daptor 38 SM-20 est Coupling SUFF est 20 Gauge daptor 25 SMD-12 est Coupling SUFF est 12 Direct Gauge daptor 46 SMD-15 est Coupling SUFF est 15 Direct Gauge daptor 38 SMD-20 est Coupling SUFF est 20 Direct Gauge daptor 25 SMK-10 est Coupling SUFF est 10 est Coupling with Male hreaded Stud 50 SMK-10 ype G est Coupling SUFF est 10 est Coupling with Straight 24 Fitting 51 SMK-10 ype K est Coupling SUFF est 10 est Coupling with 24 aper / O-ring (DKO) 52 SMK-15 est Coupling SUFF est 15 est Coupling with Male hreaded Stud 34 SMK-15 ype G est Coupling SUFF est 15 est Coupling with Straight 24 Fitting 35 SMK-15 ype K est Coupling SUFF est 15 est Coupling with 24 aper / O-ring (DKO) 36 SMK-20 est Coupling SUFF est 20 est Coupling with Male hreaded Stud 16 SMK-20 ype G est Coupling SUFF est 20 est Coupling with Straight 24 Fitting 17 SMK-20 ype K est Coupling SUFF est 20 est Coupling with 24 aper / O-ring (DKO) 19 SMK-20 ype ORFS est Coupling SUFF est 20 est Coupling with ORFS Connection 23 SMK-20-JIC ype G est Coupling SUFF est 20 est Coupling with Straight 37 JIC Connection 21 SMK-20-JIC ype K est Coupling SUFF est 20 est Coupling with 37 JIC Connection 20 SMS est Hoses and Connectors est Hose 63 SRS-15 est daptors hread daptor 57 SRS-20 est daptors hread daptor 56 SSK-20 est Coupling SUFF est 20 Bulkhead 24 SSKK-12 est Coupling SUFF est 12 Bulkhead 45 SSV est Hoses and Connectors Hose Connector Catalogue 7 Edition 10/2017

81 ppendix Catalogue 7 Edition 10/

82 ppendix Global Contact Directory SUFF products and services are globally available through wholly-owned subsidiaries and a tight network of authorised distributors and representatives in all major industrial regions of the world. Contact information on this page may be subject to changes and additions over time. Frequently updated and complete contact information can always be found at Germany Walter Stauffenberg GmbH & Co. KG Im Ehrenfeld Werdohl el.: Fax: sales@stauff.com Neuenrade-Küntrop Logistics Centre Wasserburgstraße Neuenrade Plettenberg-Ohle Production Site Lennestraße Plettenberg Voswinkel GmbH Neugrünenthal Meinerzhagen el.: Fax: info@voswinkel.net Europe France Ireland Italy Poland SUFF S..S. 230, venue du Grain d Or Z.I. de Vineuil - Blois Sud Vineuil-cedex el.: Fax: direction@stauffsa.com SUFF UK Ltd. Block B, 9 Ferguson Drive Knockmore Hill Industrial Estate Lisburn, County ntrim, B28 2EX el.: Fax: sales@stauffireland.com SUFF Italia s.r.l Via Borima 21 (Frazione Borima) Suello (LC) el.: Fax: sales@stauff.it SUFF Polska Sp. z o.o. Miszewko Banino el.: Fax: sales@stauff.pl Russian Federation United Kingdon SUFF LLC Building 1 19, Leninskaya Sloboda Moscow, el.: Fax: sales@stauff.ru SUFF UK Ltd. 500, Carlisle Street East Off Downgate Drive Sheffield, S4 8BS el.: Fax: sales@stauff.co.uk SUFF UK Ltd. Badentoy venue Badentoy Industrial Estate Portlethen, berdeen, B12 4YB el.: Fax: sales@stauffscotland.co.uk SUFF UK Ltd. Unit 9, Southampton rade Park hird venue, Millbrook Southampton, SO15 0D el: Fax: sales@stauffsouthampton.co.uk Further branch offices in Engels, Volzhskiy, Magnitogorsk, Nizhny Novgorod and St. Petersburg. North merica South merica Canada United States Brazil SUFF Canada Ltd. 866 Milner venue Scarborough Ontario M1B 5N7 el.: Fax: sales@stauffcanada.com SUFF Corporation 7 Wm. Demarest Place Waldwick, New Jersey el.: Fax: sales@stauffusa.com SUFF Brasil Ltda. venida Gupê Galpão 2 - Bloco Barueri, São Paulo, CEP el.: Fax: stauff@stauffbrasil.com Further branch office in Canton, Michigan. 82 Catalogue 7 Edition 10/2017