DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG

Transcription

1 TU3Q DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts are subject to change without notice. BUNN-O-MATIC CORPORATION POST OFFICE BOX 3 SPRINGFIELD, ILLINOIS 08-3 PHONE: (1) FAX: (1) F 03/ Bunn-O-Matic Corporation

2 BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. ( BUNN ) warrants equipment manufactured by it as follows: 1) All equipment other than as specified below: years parts and 1 year labor. ) Electronic circuit and/or control boards: parts and labor for 3 years. 3) Compressors on refrigeration equipment: 5 years parts and 1 year labor. 4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first. These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (1) or by writing to Post Office Box 3, Springfield, Illinois 08-3; ) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty. THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/ or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or ) shall replace the equipment or refund the purchase price for the equipment. THE BUYER S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages

3 TABLE OF CONTENTS Electrical and Operating Controls... 0 Funnel Assembly... 4 Numerical Index... Strainer/Flow Control, Solenoids and Lines Without Sweetener... Strainer/Flow Control, Solenoids and Lines With Sweetener... Tank Assembly... 8 Top Cover, Hood, Trunk, Base and Panels

4 BUNN TOP COVER, HOOD, TRUNK, BASE AND PANELS TU3Q Models With Sweetener 8 9 Early Model Guide Brackets P

5 ITEM PART NO. QTY. DESCRIPTION Cover, Top SST (Also order Items & 4) Cover, Top Black (Includes Item ) (Also order item 4) Cover, Top SST (Includes Item ) (Also order Item 4) (Models with Sweetener) Screw, TRH SST #-3 x.35" Screw, TRH Black #-3 x.35" Schematic, Electrical V Schematic, Electrical V (Models with Sweetener) Schematic, Electrical 30 V Hood SST (Also order Item 4) Hood Black (Also order Item 4) Screw, PNH SLTD W/SERR #8-3 x.35" Decal, Hood - Control Panel Decal, Hood - Control Panel (Models with Ready Lamp) Decal, Hood - Control Panel (Models with Sweetener) Decal, Use Quick Brew Funnel Housing, Nozzle Mounting SST Housing, Nozzle Mounting Black Nut, Hex Keps # Trunk Assy SST (Also order Item 5) Trunk Assy Black (Also order Item 5) Nut, Hex Keps # Housing Assy, Trunk Extension 8.1" HT SST (See Item 3) Housing Assy, Trunk Extension 8.1" HT Black Housing Assy, Trunk Extension.1" HT (See Item 3) Housing Assy, Trunk Extension 4.4" HT (See Item 3) Housing Assy, Trunk Extension 3.00" HT (See Item 3) Nut, Hex Keps # Bracket, Stop Screw, TRH #8-3 x.35" Guide, Base (Early Models) Guide, Base (Left Side) Guide, Base (Right Side) Late Models Screw, PNH - Locking #8-3 x.35" Base TOP COVER, HOOD, TRUNK, BASE AND PANELS Plug, Hole.5" Dia Foot,.5" O.D. x.44" HT (See Item 19) Cover, Trunk Extension - Rear 8.1" HT SST (See Item 3) Cover, Trunk Extension - Rear 8.1" HT Black Cover, Trunk Extension - Rear.1" HT (See Item 3) Cover, Trunk Extension - Rear 4.4" HT (See Item 3) Cover, Trunk Extension - Rear 3.00" HT (See Item 3) Screw, TRH SST #8-3 x.35" Screw, TRH Black #8-3 x.35" Fastener, J-Type #8-3 (continued)

6 BUNN TOP COVER, HOOD, TRUNK, BASE AND PANELS (continued) TU3Q Models With Sweetener 8 9 Early Model Guide Brackets P

7 TOP COVER, HOOD, TRUNK, BASE AND PANELS ITEM PART NO. QTY. DESCRIPTION Plug, Hole.5" Dia. (30V Models Only) Panel W/Decals, Trunk SST (Includes Items 1 & 18) Panel W/Decals, Trunk Black (Includes Items 1 & 18) Panel W/Decals, Trunk Black (Includes Items 1 thru 0) (V Models with Sweetener) Screw, TRH SST #8-3 x.35" Screw, TRH Black #8-3 x.35" Fastener, J-Type # Decal, Comply With Plumbing Code Decal, Electrical Warning Decal, Water Inlet Decal, Sweetener Inlet Edging, 18" LG (Cut to ") Kit, Foot (Includes four feet) Trunk Extension Kit, 8.1" HT (Includes Items 8, & Hardware) Trunk Extension Kit,.1" HT (Includes Items 8, & Hardware) Trunk Extension Kit, 4.4" HT (Includes Items 8, & Hardware) Trunk Extension Kit, 3.00" HT (Includes Items 8, & Hardware) Decal, Batch Set (Digital Timer) (Late Models)

8 BUNN TANK ASSEMBLY TU3Q P

9 ITEM PART NO. QTY. DESCRIPTION TANK ASSEMBLY Tank Assy, 180W V (Includes Items thru 9, 1, 13, & 1) (V Only) Screw, TRH #8-3 x.35" Tank W/Blanket Warmer V (Includes Items, 3) Tank W/Blanket Warmer 30 V (Includes Items, 3) Tank Blanket Warmer, 55W V Blanket Warmer, 55W 30V Gasket, Tank Lid Thermostat, Limit 30 amp Nut, Hex.50" Sprayhead Tube Kit (Includes 3 Mounting Nuts below, Items 8 & 13) Nut, Hex # Gasket, Sprayhead Tube Lid Assembly, Tank Screw, Hex Head Thread Forming # x.50" Nut, Hex.438" Sprayhead, Hole Sprayhead, -Hole (Optional) Gasket, Tank Heater Syphon Hub Tank Heater, 180W V (Includes Item 1) (V) Tank Heater, 180W 0V (Includes Item 1) (0V) Tank Heater, 180W 30V (Includes Item 1) (30V) Bracket, Tank Mounting Screw, TRH #8-3 x.35"

10 BUNN STRAINER/FLOW CONTROL, SOLENOIDS AND LINES WITHOUT SWEETENER TU3Q Optional - Quiet Strainer/Flow Control P

11 STRAINER/FLOW CONTROL, SOLENOIDS AND LINES W/OUT SWEETENER ITEM PART NO. QTY. DESCRIPTION Tube Assy, Bulkhead to Solenoid Solenoid Valve (Includes Items 3-) (V) Solenoid Valve (Includes Items 3, 5 & ) (0V) Solenoid Valve (Includes Items 3-5) (30V) Screw PNH #-3 x.35" Lockwasher # Base Kit (Includes O-Ring) (V) Base (0V) Core Assy Kit, (30V) Valve Repair Kit (Includes Plunger, Spring & O-Ring) Valve Coil (V) Valve Coil (0V) Valve Coil (30V) Guide Kit (Includes Washer & O-Ring) (V) Guide (0V) Elbow,.5" Flare x.15" MPT Tube Assy, Mnf - Needle Valve to Dilution (See Item 40) Bracket, Solenoid Valve Mounting Nut, Keps # Tube Assy, Air Vent Elbow,.35" Compression x.15" MPT Elbow,.5" Barb x.15" MPT Nozzle, Dilution Screw, TRH SERR SST #-3 x.35" Screw, TRH SERR Blk #-3 x.35".0000 Clamp Tube, Silicone,.50" ID x 1.0" Lg Bushing, Snap 1.0" Dia Nut, Hex.35" Lockwasher, INTL TOOTH -.438" Fitting, Bulkhead Tube Assy, Strainer/Flow Control Strainer/Flow Control.50 GPM (Includes Items 3-8) Strainer/Flow Control w/tubing.50 GPM (Includes Items 0, 1 & 43) Fitting, Flow Control Inlet Screen (Continued)

12 BUNN STRAINER/FLOW CONTROL, SOLENOIDS AND LINES WITHOUT SWEETENER (Continued) TU3Q Optional - Quiet Strainer/Flow Control P

13 STRAINER/FLOW CONTROL, SOLENOIDS AND LINES W/OUT SWEETENER ITEM PART NO. QTY. DESCRIPTION Body (Not Serviced, Order Item 1) Flow Washer/ Gasket Kit.50 GPM (Includes Item ) Gasket Fitting, Flow Control Outlet Cap, Brass.5" Flare (For shipping purposes only) Connector.5" FPT x.5" Barb Connector,.5" Flare x.5" MPT Tube, Silicone.31" ID x 1.0" Lg (Cut to ") Gasket, Tank inlet Washer Needle Valve (See Item 40) Tube Assy, Needle Valve to Tank (See Item 40) Fitting, Tank Inlet (Includes Items 38 & 39) Elbow, Male - TNPL.5" FLR x.1 MPT Fitting, Inlet -.50" -1 x.1 FPT Tube Assy, Manifold to Solenoid (Includes Items 8, 30, 31, 35 & 3) Strainer/Flow Control.50 GPM (Includes Items 3-5) (Optional - Quiet) Connector, Male (Optional - Quiet Strainer/Flow Control) Flow Control, Assembly (Optional - Quiet Strainer/Flow Control) Tube Assembly, Flow Control Strainer to Copper (Optional - Quiet Strainer/Flow Control) Adaptor, Strainer Extension (Optional - Quiet Strainer/Flow Control) Cap (Optional - Quiet Strainer/Flow Control) Strainer/Flow Control w/tubing.50 GPM (Includes Items 0, 41, 4-4 & 55) (Optional - Quiet Strainer/Flow Control) Coupling, Quick Female W/Shut-off (Optional - Quick Connect) Elbow, Union.50" FPT (Optional - Quick Connect) Adapter,.50" FFL x.50" MPT (Optional - Quick Connect) Fitting Assembly (Includes items 48 & 49) (Optional - Quick Connect) Hose Assembly (Optional - Quick Connect) Assembly, Quick Connect W/ Adaptor (Includes Items 50 & 51) Kit, Quick Connect,.50" (Includes Items & 53) Gasket.5" Flare - Copper

14 BUNN STRAINER/FLOW CONTROL, SOLENOIDS AND LINES WITH SWEETENER TU3Q Optional - Quiet Strainer/Flow Control P

15 STRAINER/FLOW CONTROL, SOLENOIDS AND LINES WITH SWEETENER ITEM PART NO. QTY. DESCRIPTION Tube Assy, Bulkhead to Solenoid Solenoid Valve (Includes Items 3, 5 & ) (V) Screw PNH #-3 x.35" Lockwasher # Base (V) Valve Repair Kit (Includes Plunger, Spring & O-Ring) Valve Coil (V) Guide (V) Elbow,.5" Flare x.15" MPT Tube Assy, Mnf - Needle Valve to Dilution (See Item 4) Bracket, Solenoid Valve Mounting Nut, Keps # Tube Assy, Air Vent Elbow,.35" Compression x.15" MPT Elbow,.5" Barb x.15" MPT Nozzle, Dilution Screw, TRH SERR SST #-3 x.35" Screw, TRH SERR Blk #-3 x.35".0000 Clamp Tube, Silicone,.50" ID x.50" x.0" (Order item 50) Bushing, Snap 1.0" Dia Nut, Hex.35" Lockwasher, INTL TOOTH -.438" Fitting, Bulkhead Tube Assy, Strainer/Flow Control Strainer/Flow Control.50 GPM (Includes Items 3-8) Strainer/Flow Control w/tubing.50 GPM (Includes Items 0 & 1) Fitting, Flow Control Inlet Screen Body (Not Serviced, Order Item 1) Flow Washer/ Gasket Kit.50 GPM (Includes Item ) Gasket Fitting, Flow Control Outlet Cap, Brass.5" Flare (For shipping purposes only) (Continued)

16 BUNN STRAINER/FLOW CONTROL, SOLENOIDS AND LINES WITH SWEETENER (Continued) TU3Q Optional - Quiet Strainer/Flow Control P

17 STRAINER/FLOW CONTROL, SOLENOIDS AND LINES WITH SWEETENER ITEM PART NO. QTY. DESCRIPTION Connector,.5" Flare x.1" MPT Connector.5" FPT x.5" Barb Tube, Silicone,.50" ID x.50" x 5.0") (Order item 50) Tee,.50" Barb Tube, Silicone.31" ID x 1.0" Lg (Cut to ") Gasket, Tank inlet Washer Needle Valve (See Item 4) Tube Assy, Needle Valve to Tank (See Item 4) Fitting, Tank Inlet (Includes Items 40 & 41) Elbow, Male - TNPL.5" FLR x.1 MPT Fitting, Inlet -.50" -1 x.1 FPT Tube Assy, Manifold to Solenoid (Includes Items 8, 30, 31, 3 & 38) Tube Assembly, Flow Control to Check Valve Adapter,.15" MPT to 015" FPT Tube Assembly, Needle Valve to Bulkhead Valve, Needle Adapter,.15" MPT Tube, Silicone.50" I.D. x.50" O.D. x 15.0" LG (Order Item 50) Strainer/Flow Control.50 GPM (Includes Items 3-5) (Optional - Quiet) Tube, Silicone.50" I.D. x.50" O.D. x 1" LG (Cut to Required Length) Tube, Silicone.50" I.D. x.50" O.D. x 3" LG (Cut to Required Length) Connector, Male (Optional - Quiet Strainer/Flow Control) Flow Control, Assembly (Optional - Quiet Strainer/Flow Control) Tube Assembly, Flow Control Strainer to Copper (Optional - Quiet Strainer/Flow Control) Adaptor, Strainer Extension (Optional - Quiet Strainer/Flow Control) Cap (Optional - Quiet Strainer/Flow Control) Strainer/Flow Control w/tubing.50 GPM (Includes items 0, 49, & 4) (Optional - Quiet Strainer/Flow Control) Coupling, Quick Female W/Shut-off (Optional - Quick Connect) Elbow, Union.50" FPT (Optional - Quick Connect) (Continued)

18 BUNN STRAINER/FLOW CONTROL, SOLENOIDS AND LINES WITH SWEETENER (Continued) TU3Q Optional - Quiet Strainer/Flow Control P

19 STRAINER/FLOW CONTROL, SOLENOIDS AND LINES WITH SWEETENER ITEM PART NO. QTY. DESCRIPTION Adapter,.50" FFL x.50" MPT (Optional - Quick Connect) Fitting Assembly (Includes items 5 & 58) (Optional - Quick Connect) Hose Assembly (Optional - Quick Connect) Assembly, Quick Connect W/ Adaptor (Includes Items 59 & 0) (Not Illustrated) Kit, Quick Connect,.50" (Includes Items 5-0) (Not Illustrated) Gasket.5" Flare - Copper Bracket, Solenoid Valve Mount (Models with Sweetener Only) Nut, Keps #

20 BUNN ELECTRICAL AND OPERATING CONTROLS TU3Q Late 30V Models MINUTES BUNN-O-MATIC P/N 0- VAC Early Model Timer P

21 ITEM PART NO. QTY. DESCRIPTION Shield,.0" x 9.0" Shield, 5.0" x 9.0" Knob, Thermostat ELECTRICAL AND OPERATING CONTROLS Thermostat Assy, 0F Max (Includes Item 3) Screw, Truss Head #-3 x.38" Lamp Assembly, Green V (Optional) Switch, Start (0 & V Models and Early 30V Models) Switch, Start (Late 30V Models) Switch, On/Off (0V & V Models) Switch, On/Off (V Models W/Sweetener) Switch, On/Off (Early 30V Models) Switch, On/Off (Late 30V Models) Timer, 8 Min - V (Used on 0V & V Models) Timer, 8 Min - 40V (Used on 30V Models) Digital Timer - V (Late Models) Digital Timer - 40V (Late Models) # Lockwasher Screw, Truss Head #-3 x.5" Screw, Truss Head #-3 x.38" Cap, Terminal (Not Illustrated) Early Models - Order Item Screw, PNH w/ Term WSHR #-3 x.50" Bushing, Strain Relief (0V & V only) Power Cord (0V & V only) Power Cord (V Models with Sweetener) Clamp, Nylon Nut, KEPS # Spacer Bushing Lead, Electrical Ground 1 AWG GRN/YEL 15" Long Screw, PNH SLTD Brass - #-3 x.50" Lockwasher, EXT T - # Decal, Ground Power Connector - 3 Pin Amp 50V Screw OVH SLTD SST #4-40 x.50" Lockwasher, EXT T - # Nut, Hex - SST # V Models (Continued)

22 BUNN ELECTRICAL AND OPERATING CONTROLS (Continued) TU3Q Late 30V Models MINUTES BUNN-O-MATIC P/N 0- VAC Early Model Timer P

23 ITEM PART NO. QTY. DESCRIPTION ELECTRICAL AND OPERATING CONTROLS Note: The following items are not illustrated Wire Nut, Orange, Warmer Blanket Wires to Main Harness Wiring Harness, Main - V (Used on 0V & V Models) Wiring Harness, Main - 30V (Used on 30V Models) Lead, Elec - 18 AWG BLK.5", Warmer Blanket to Main Harness Lead, Elec - 18 AWG WHI.5", Warmer Blanket to Main Harness (Not Used in 30V) Cable Tie, Nylon Lead, Elec - 1 AWG BLK 18.0" Control Thermostat to Tank Heater Screw, BDGH SLTD 8-3 x.5" Lead, Elec - 1 AWG BLU/BLK 1.0" Control Thermostat to Limit Thermostat Screw, BDGH SLTD 8-3 x.5" Thermal Cut-Off W/Terminals Lead, Elec - 18 AWG RED.0", Power Connector to Main Harness Lead, Elec - 18 AWG BLK.0", Power Connector to Main Harness 30V Models Lead, Elec - 18 AWG RED.5", Warmer Blanket to Main Harness Timer Kit, V (Replaces Early Model Timer with Digital Timer) Timer Kit, 40V (Replaces Early Model Timer with Digital Timer) Wiring Harness, Sweetener Solenoid

24 BUNN FUNNEL ASSEMBLY TU3Q SPLASHGARD US PAT. NO.,055,900,,49,818 PAT. PEND Optional Pouch Pack Funnel P

25 FUNNEL ASSEMBLY ITEM PART NO. QTY. DESCRIPTION Funnel Assembly, Smoke - Quick Brew (Includes items thru 8) Adaptor W/Screen, Funnel (See item 9) Funnel, Brew Tea - Smoke (Not Available. Order item 1) Decal, Caution - Remove Funnel Decal, Caution - Hot Liquid Decal, Quick Brew Funnel Tip,.1" Dia (See Item 9) Splashgard Funnel Tip & Screen Kit (Includes items & ) Funnel Assembly, Smoke - Pouch Pack (Includes items,, & 11 thru 15) Funnel, Pouch Pack - Smoke (Not Available. Order item ) Splashgard, Pouch Pack Decal, Warning - Remove Funnel Decal, Warning - Hot Liquid Insert, Wire Form - Pouch Pack

26 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO , , ,13,15, , , , , , , , , , , , , , ,11,15,19, , , , , , , , , ,, , ,11, ,11, , , , , , , , , , , ,15, , , , , , , , , , , , , , , , , , , , , , , , ,