ILLUSTRATED PARTS CATALOG

Transcription

1 JDF-4S Silver Series ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts are subject to change without notice. BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS PHONE: (217) FAX: (217) F 03/ Bunn-O-Matic Corporation

2 BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. ( BUNN ) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, thermal servers and ThermoFresh servers (mechanical and digital) 1 year parts and 1 year labor. 2) All other equipment - 2 years parts and 1 year labor plus added warranties as specified below: a) Electronic circuit and/or control boards - parts and labor for 3 years. b) Compressors on refrigeration equipment - 5 years parts and 1 year labor. c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and labor for 4 years or 40,000 pounds of coffee, whichever comes first. These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality, damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) or by writing to Post Office Box 3227, Springfield, Illinois ; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty. THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EX- PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment. THE BUYER S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages. 392, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, Brew- WISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, imix, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, TRIFECTA (sylized logo), Velocity Brew, Air Brew, Beverage Bar Creator, Beverage Profit Calculator, Brew better, not bitter., Build-A-Drink, BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer Control, Element, Milk Texturing Fusion, Nothing Brews Like a BUNN, Picture Prompted Cleaning, Pouring Profits, Signature Series, Sure Tamp, Tea At Its Best, The Horizontal Red Line, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta brewer housing configuration is a trademark of Bunn-O-Matic Corporation

3 TABLE OF CONTENTS Main Frame & Covers... 4 Upper Cabinet & Panels... 6 Refrigeration Components... 8,10,12 Compressor Components... 14,16,18 Fan Assembly... 20,22,24 Water Tank Assy Circulation Pump & Lines Product Coil & Lines Dispense Platform Assy Dispense Valve Assy Plain Water Manifold Door Assy - Unlited Door Assy - Lited w/mechanical Switches Door Assy - Lited w/membrane Switches Door Assy - Lited with 4 Segment Display Electrical Components Refillable Container Assy Numerical Index

4 MAIN FRAME & COVERS JDF-4S P

5 MAIN FRAME & COVERS ITEM PART NO. QTY. DESCRIPTION Leg Pad, Non-skid Bracket, Side Screw, Pan Head #8-32 x.38" Panel w/decals, Right (Includes item 5) Screw, Truss Head, Blk #10-32 x.38" Lockwasher, Int.-tooth.438" Decal, Warning - Electrical Panel, Top Screw, Truss Head, Blk #10-32 x.38" Lockwasher, Int.-tooth.438" Panel w/decals, Left (Includes items 8 & 9) Screw, Truss Head, Blk #10-32 x.38" Lockwasher, Int.-tooth.438" Decal, Refrigerant Charge Decal, Warning - Moving Parts Panel w/decals, Rear (Includes items 11, 12)(Models with Frame mounted Air Filter) Panel w/decals, Rear (Includes items 11, 12)(Models with Cover mounted Air Filter) Screw, Truss Head, Blk #10-32 x.38" Lockwasher, Int.-tooth.438" Decal, Comply To Plumbing Code Bracket (Models with Front Mounted Refrigeration Switch) Screw, Hex Crimptite #8 x.38" Bushing Plug Panel, Splash (Includes items 17 & 18) Screw, Pan Head #8-32 x.38" Decal, Dispense/No Dispense Schematic, Electrical Bracket Screw, Pan Head #8-32 x.38" Catch, Magnetic Drip Tray Assy (Includes Strike Plate and item 22) Drip Tray Assy, Extended (For use with larger cup sizes) Grate, Drip Tray Bracket,Front Left Bracket, Front Right Screw, Pan Head #8-32 x.38" Bracket, Condenser Mounting Screw, Hex Crimptite #8 x.38"

6 UPPER CABINET & PANELS JDF-4S P

7 ITEM PART NO. QTY. DESCRIPTION UPPER CABINET & PANELS Cabinet (Models without Cold Water Dispense) Cabinet (Models with Cold Water Dispense) Screw, Pan Head # Plate, Bottom Closure Screw, Flat Head #8-32 x.38" Bushing, Hinge Wrap (Late Models with Bolt On Door Hinge) Screw, Pan Head # Screw, Pan Head #8-32 x.38" Bracket, Hinge Screw, Truss Head, Blk #10-32 x.38" Washer Catch, Door Latch Screw, Truss Head #6 x.38" Screw, Shoulder Plug Coil, Water Screw, Pan Head # Sensor Assy, Temperature Clip, Adhesive Back Fan Assy Cover, Fan Screw, Pan Head # Shelf, Product Gasket, Drip Plug Nozzle, Quick Stop White (Includes item 18) Nozzle, Quick Stop Black (Includes item 18) O-ring (Also order item 24) * 1 Tube, Silicone.25"ID x 9.5" (Order item 24) Y Fitting.25" Barb Guard, Fan Screw, Hex Head # Bracket, Lower Door Hinge Screw, Hex Crimptite #8 x.38" Washer 23 M Lubrifilm 1.0 oz (Use when assembling item 18) Tube, Silicone.25"ID x 12.0" (Use as required) Nozzle Kit, Quick Stop White (Set of 4) Nozzle Kit, Quick Stop Black (Set of 4)

8 REFRIGERATION COMPONENTS (EMBRACO COMPRESSOR) JDF-4S B 7 8 A NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations. 8 P

9 REFRIGERATION COMPONENTS (EMBRACO COMPRESSOR) ITEM PART NO. QTY. DESCRIPTION Air Filter Assy (Includes item 16) Condenser Screw, Crimptite #8 x.38" Tee (Requires brazing to install) Adapter (Requires brazing to install) Tube (Requires brazing to install) Tube (Requires brazing to install) Accumulator Compressor (See COMPRESSOR COMPONENTS) Nut.25" Fan Assy (See FAN ASSEMBLY) Screw, Crimptite #8 x.38" 10 M Tape, Tube Insulating (Use as required) 11 M Insulation, Tube 25/ "ID x.19" wall x 6.0 Ft (Use as required) Velcro, Loop 3.5" (4 pieces) Velcro, Hook 3.5" (4 pieces) Not Illustrated Edging 1.0" (Order item 19) Tube (Requires brazing to install) Edging 12.0" (Use as required)

10 REFRIGERATION COMPONENTS (CUBIGEL COMPRESSOR) JDF-4S A B P3859 NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations

11 REFRIGERATION COMPONENTS (CUBIGEL COMPRESSOR) ITEM PART NO. QTY. DESCRIPTION Air Filter Assy (Includes item 15) Condenser Screw, Crimptite #8 x.38" Tee (Requires brazing to install) Adapter (Requires brazing to install) Tube (Requires brazing to install) Filter Dryer Assy (Requires brazing to install) Accumulator Compressor (See COMPRESSOR COMPONENTS) Nut.25" Grommet Sleeve Fan Assy (See FAN ASSEMBLY) Screw #8-36 x.437" Bracket Screw, Pan Head #8-32 x.38" 13 M Tape, Tube Insulating (Use as required) 14 M Insulation, Tube 25/ "ID x.19" wall x 6.0 Ft (Use as required) Velcro, Loop 3.5" (4 pieces) Velcro, Hook 3.5" (4 pieces) Not Illustrated

12 REFRIGERATION COMPONENTS (LG COMPRESSOR) JDF-4S A B P NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations

13 ITEM PART NO. QTY. DESCRIPTION Air Filter Assy (Includes item 16) Condenser Screw, Crimptite #8 x.38" Tube (Requires brazing to install) Tee (Requires brazing to install) Adapter (Requires brazing to install) Tube (Requires brazing to install) Filter Dryer Assy (Requires brazing to install)(includes item 18) Accumulator Compressor (See COMPRESSOR COMPONENTS) Nut.25" Grommet Sleeve REFRIGERATION COMPONENTS (LG COMPRESSOR) Fan Assy (See FAN ASSEMBLY) Screw #8-36 x.437" Bracket Screw, Pan Head #8-32 x.38" 14 M Tape, Tube Insulating (Use as required) 15 M Insulation, Tube 25/ "ID x.19" wall x 6.0 Ft (Use as required) Velcro, Loop 3.5" (4 pieces) Velcro, Hook 3.5" (4 pieces) Not Illustrated Edging 1.0" (Use as required) Filter Dryer Kit Edging 12.0" (Use as required)

14 COMPRESSOR COMPONENTS (EMBRACO) JDF-4S P

15 ITEM PART NO. QTY. DESCRIPTION COMPRESSOR COMPONENTS (EMBRACO) Compressor 120V (Includes items 1-4) Compressor 230V (Includes items 1-4) Relay, Compressor 120V Relay, Compressor 230V Overload Protector 120V Overload Protector 230V Grommet Sleeve

16 COMPRESSOR COMPONENTS (CUBIGEL) JDF-4S P Early Models P

17 ITEM PART NO. QTY. DESCRIPTION COMPRESSOR COMPONENTS (CUBIGEL) Relay, Compressor 120V Relay, Compressor 230V Overload Protector 120V Overload Protector 230V Cable Strain Relief Cover Mounting Kit (Includes 4 Grommets and Sleeves)

18 COMPRESSOR COMPONENTS (LG) JDF-4S P

19 ITEM PART NO. QTY. DESCRIPTION COMPRESSOR COMPONENTS (LG) Compressor 120V (Includes items 1-3) Compressor 230V (Includes items 1-3) Grommet Sleeve Terminal Adapter Screw, Truss Head M4 x 7mm Kit, Electrical Components, 120V Kit, Electrical Components, 230V

20 FAN ASSEMBLY (Early Models with Embraco Compressor) JDF-4S P

21 FAN ASSEMBLY (Early Models with Embraco Compressor) ITEM PART NO. QTY. DESCRIPTION Fan Assy 120V (Includes items 1-4) Fan Assy 230V (Includes items 1-4) Motor Assy 120V Motor Assy 230V Blade, Fan Nut.25" Shroud, Fan

22 FAN ASSEMBLY (Late Models with Embraco Compressor) JDF-4S

23 FAN ASSEMBLY (Late Models with Embraco Compressor) ITEM PART NO. QTY. DESCRIPTION Fan Assy with Wire Guard 120V (Includes items 1-4) Fan Assy with Wire Guard 230V (Includes items 1-4) Motor Assy 120V Motor Assy 230V Blade, Fan Nut.25" Wire Guard

24 FAN ASSEMBLY JDF-4S P

25 ITEM PART NO. QTY. DESCRIPTION FAN ASSEMBLY Fan Assy 120V (Includes items 1-4) Fan Assy 230V (Includes items 1-4) Motor Assy 120V Motor Assy 230V Blade, Fan Silencer Nut.25"

26 WATER TANK ASSY JDF-4S A B NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations. 26 P

27 ITEM PART NO. QTY. DESCRIPTION WATER TANK ASSY Tank Assy Screw, Pan Head # Lid Assy Screw, Pan Head # Nut, Keps # Bracket Nut, Keps # Bracket Nut, Keps # Grommet Probe, Temperature Pump Assy 120V Pump Assy 230V Screw #8-36 x.437" Hose, Flex.38" ID x.625" OD x 27.0" Hose, Flex.38" ID x.625" OD x 22.0" (Models with Embraco Compressor) Clamp.57" -.70" Reducer.50 to.25" Barb * 1 Hose, Flex.38" ID x.625" OD x 3.0" (Order item 29) Plug Clip, Tube Mounting Tee.375" Barb * 1 Tube, Silicone.312" ID x 6.0" (Order item 28) * 1 Tube, Silicone.312" ID x 5.5" (Order item 28) * 1 Tube, Silicone.312" ID x 3.25" (Order item 28) Bracket Screw, Pan Head #8-32 x.38" Evaporator Coil Assy (Includes items 20 & Ties) Spacer Product Coil Spacer Elbow Connector.38" Barb Clamp.57" -.70" (Continued)

28 WATER TANK ASSY JDF-4S (Continued) A B NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations. 28 P

29 ITEM PART NO. QTY. DESCRIPTION WATER TANK ASSY 26 M Insulation, Tube 25/50.50" ID x 72.0" (Cut to required length) Hose, Flex.38" ID x.625" OD x 12.0" (Cut to required length) Hose, Flex.38" ID x.625" OD x 36.0" (Cut to required length) Hose, Flex.38" ID x.625" OD x 120.0" (Cut to required length) Hose, Clear PVC.312" ID x.50" OD x 12.0" (Cut to required length) Hose, Clear PVC.312" ID x.50" OD x 36.0" (Cut to required length) Hose, Clear PVC.312" ID x.50" OD x 120.0" (Cut to required length) Hose, Silicone.50" ID x.625" OD x 12.0" (Cut to required length) Hose, Silicone.50" ID x.625" OD x 36.0" (Cut to required length)

30 CIRCULATION PUMP & LINES JDF-4S P

31 ITEM PART NO. QTY. DESCRIPTION CIRCULATION PUMP & LINES Coil, Upper Cabinet (See UPPER CABINET & PANELS) Tube, Silicone.38" ID x 20.0" (Order item 6) Pump, Circulation (See WATER TANK ASSEMBLY) Clamp, Hose Worm Drive.625/.75" (Early Models) Clamp (Late Models) 5 M Insulation, Tube 25/50.38" ID x 72.0" (Cut to required length) Hose, Flex.38" ID x 36.0" (Cut to required length)

32 PRODUCT COIL & LINES JDF-4S Models w/ Cold Water Dispense C C V Models NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations. 32 P

33 PRODUCT COIL & LINES ITEM PART NO. QTY. DESCRIPTION Product Coil (See WATER TANK ASSEMBLY) Clamp.57" -.70" (Two additional used on 230V models) * 1 Hose, Flex.38" ID x 6.5" (Order item 21) Valve, Water Inlet 120V Valve, Water Inlet 230V See item Screw, Pan Head M4 x 6mm Fitting, Elbow.38" Fl x.75" Fine Hose (Includes Gasket) Gasket * 1 Hose, Flex.38" ID x 12.0" (Order item 21)(Models w/o Cold Water Dispense) * 1 Hose, Flex.38" ID x 9.25" (Order item 21)(Models w/ Cold Water Dispense) Tee, Nylon.38" Barb * 1 Hose, Flex.38" ID x 5.75" (Order item 21) * 1 Hose, Flex.38" ID x 1.50" (Order item 21) Coupling, Quick Disconnect, Male Tee, Nylon.38" x.38" x.25" Barb * 1 Hose, Flex.38" ID x 1.5" (Order item 21) * 1 Hose, Braided.25" ID x 4.0" 120V (Order item 22) * 1 Hose, Braided.25" ID x 3.50" 230V (Order item 22) * 1 Hose, Braided.25" ID x 23.0" 120V (Order item 22) * 1 Hose, Braided.25" ID x 26.0" 230V (Order item 22) Clamp.45" -.55" Nozzle, Cold Water O-ring Valve w/fittings, Solenoid 120V Screw, Truss Head, Locking #10-32 x.312" Valve w/fittings, Solenoid 230V Screw, Pan Head #8-32 x.38" (Early Models) Screw, Pan Head M3 x 10mm (Late Models) Washer * 2 Hose, Flex.38" ID x 2.50" (Order item 21) (230V) Check Valve (230V) Hose, Flex.38" ID x 12.0" (Cut to required length) Hose, Flex.38" ID x 36.0" (Cut to required length) Hose, Flex.38" ID x 120.0" (Cut to required length) Hose, Braided.25" ID x 12.0" (Cut to required length) Hose, Braided.25" ID x 36.0" (Cut to required length) Hose, Braided.25" ID x 120.0" (Cut to required length) 23 M Insulation, Tube 25/50.50" ID x 72.0" (Cut to required length) 24 M Insulation, Tube 25/50.38" ID x 72.0" (Cut to required length) Hose Assy 120V (Includes items 2, 6-17, 21 & 22) Hose Assy 230V (Includes items 2, 6-17, 21 & 22) Kit, Valve Rebuild (Not Illustrated)

34 DISPENSE PLATFORM ASSEMBLY JDF-4S C P3623 NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations

35 ITEM PART NO. QTY. DESCRIPTION DISPENSE PLATFORM ASSEMBLY Platform Assy (Each includes items 1-19) Platform Thumbscrew Pump Head (Includes items 4 & 5) Rotor Screw, Pan Head #8-32 x 2.45" Tube, Norprene.25" ID x 17.0" lg Clamp.39"/.48" Fitting, Elbow.25" Barb x.38" Barb Clamp.57"/.70" * 2 Hose, Flex.38" ID x 4.75" lg (Order item 20) Dispense Valve (See DISPENSE VALVE) Screw, Truss Head #6-32 x 25" Bracket Screw, Truss Head #6-32 x 25" Fitting, Bottle Adapter Screw, Truss Head #6-32 x 25" Plate Screw, Truss Head #6-32 x 25" Manifold, Plain Water (See PLAIN WATER MANIFOLD) Gasket Bushing, Rubber Motor Assy Screw #8-32 x 1.25" The following items are not illustrated Harness, Dispense Platform Hose, Flex.375" ID x 12.0" (Use as required) Hose, Flex.375" ID x 36.0" (Use as required) Hose, Flex.375" ID x 120.0" (Use as required) Pump Tube (Includes items 6,7,8,9 & 10)

36 DISPENSE VALVE ASSEMBLY JDF-4S P

37 ITEM PART NO. QTY. DESCRIPTION DISPENSE VALVE ASSEMBLY Dispense Valve Assy (Includes items 1-18) Body Seal Valve, Solenoid (Includes items 4 & 5) Screw, Truss Head 6-32 x.38" O-ring O-ring Fitting, Elbow O-ring (Also use item 18) Clamp Screw #6-32 x.25" Sleeve O-ring (Also use item 18) Piston Spring, Flow Control Bonnet, Adjuster O-ring (Also use item 18) Adjuster, Position O-ring (Also use item 18) Bracket, Water Adjustment Screw #6-32 x.25" Lube, Silcone (Use when assembling items 7,10,14 & 16)

38 PLAIN WATER MANIFOLD JDF-4S 7 3 C P3624 NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations

39 ITEM PART NO. QTY. DESCRIPTION Fitting, Straight O-ring PLAIN WATER MANIFOLD * 4 Hose, Braided.25" ID x 3.0" (Order item 8) Clamp " Tee.25" Barb * 2 Hose, Braided.25" ID x 5.25" (Order item 8) Coupling, Quick Disconnect, Female Hose, Braided.25" ID x 12.0" (Cut to required length) Hose, Braided.25" ID x 36.0" (Cut to required length) Hose, Braided.25" ID x 120.0" (Cut to required length)

40 DOOR ASSEMBLY - UNLITED JDF-4S P

41 ITEM PART NO. QTY. DESCRIPTION DOOR ASSEMBLY - UNLITED Door, Inner (Includes item 2) Gasket, Door Cover, Door Front Screw, Truss Head, Blk #10-32 x.375" Strip, Adhesive Flavor Label Holder Switch, Dispense Decal, Door Wrap (BUNN Juice) Decal, Door Wrap (BUNN Iced Coffee) Keeper, Door Latch Nut, Acorn Washer Switch, Cold Water Dispense Key Lock (Includes 2 keys) Key Set The following items are not illustrated Wiring Harness, Switches Decals, Flavor (BUNN Juice) Decals, Flavor (BUNN Iced Coffee)

42 DOOR ASSEMBLY - LITED w/mechanical SWITCHES JDF-4S Dual Ballast Doors Early Models with Flourescent Bulbs P

43 DOOR ASSEMBLY - LITED w/mechanical SWITCHES ITEM PART NO. QTY. DESCRIPTION Door, Inner (Includes item 2) Gasket, Door Keeper, Door Latch Nut, Acorn Washer Panel, Light Screw, Pan Head #8-32 x Lamp Holder (Early Models) Lamp, Flourescent (Early Models) Ballast (Single Ballast Doors) Screw, Hex Crimptite #8 x Cover, Door Front (Juice Display) Cover, Door Front (Iced Coffee Display) Cover, Door Front (Juice Display)(Models w/ Cold Water Dispense) Screw, Truss Head, Blk #10-32 x Strip, Adhesive Flavor Label Holder Switch, Dispense Switch, Cold Water Dispense Spacer Circuit Board Wiring Harness LED Key Lock (Includes 2 keys) Key Set The following items are not illustrated Wiring Harness, Switches Decals, Flavor (BUNN Juice) Decals, Flavor (BUNN Iced Coffee) Wiring Harness, Door (Models with Flourescent Bulbs) Wiring Harness, Door (Models with LED Lights) Wiring Harness, Door (Models with LED Lights & Program Switch)

44 DOOR ASSEMBLY - LITED w/membrane SWITCHES JDF-4S Dual Ballast Doors Early Models with Flourescent Bulbs 22 P

45 DOOR ASSEMBLY - LITED w/membrane SWITCHES ITEM PART NO. QTY. DESCRIPTION Door, Inner (Includes item 2) Gasket, Door Keeper, Door Latch Nut, Acorn Washer Panel, Light Screw, Pan Head #8-32 x Lamp Holder (Early Models) Lamp, Flourescent (Early Models) Ballast (Single Ballast Doors) Screw, Hex Crimptite #8 x Cover, Door Front (Juice Display) Cover, Door Front (Iced Coffee Display) Cover, Door Front (Juice Display)(Models w/ Cold Water Dispense) Screw, Truss Head, Blk #10-32 x Strip, Adhesive Flavor Label Holder Bezel Assy, Switch (Portion Control) Bezel Assy, Switch (Push Button) Membrane Switch (Portion Control Models) Membrane Switch (Push Button Models) Bezel, Cold Water Dispense Switch Retainer, Bezel Screw, Pan Head #6 x.60" Membrane Switch, Cold Water Dispense Circuit Board, Portion Control Spacer, Circuit Board Spacer Circuit Board Wiring Harness LED Key Lock (Includes 2 keys) Key Set Bracket Kit Screw The following items are not illustrated Wiring Harness, Door (Models with Flourescent Bulbs) Wiring Harness, Door (Models with LED Lights) Wiring Harness, Door (Models with LED Lights & Program Switch) Decals, Flavor (BUNN Juice) Decals, Flavor (BUNN Iced Coffee)

46 DOOR ASSEMBLY - LITED 4 SEGMENT DISPLAY JDF-4S Doors with Push Button Controls P

47 DOOR ASSEMBLY - LITED 4 SEGMENT DISPLAY ITEM PART NO. QTY. DESCRIPTION Door, Inner (Includes item 2) Gasket, Door Keeper, Door Latch Nut, Acorn Washer CB, LED Circuit Board Spacer Circuit Board Bracket, Lens Retaining Screw, Hex Washer #6-20 x.50" Lens Door (Models without Cold Water Dispense) Door (Models with Cold Water Dispense) Screw Switch Assy, Portion Control (Includes item Bezel and screws) Switch Assy, Push Button (Includes item Bezel and screws) Switch, Water (Models with Cold Water Dispense) The following items are not illustrated Wiring Harness, LED to CB Wiring Harness, Door Graphics Kit

48 C A C + A ELECTRICAL COMPONENTS JDF-4S P

49 ITEM PART NO. QTY. DESCRIPTION ELECTRICAL COMPONENTS Switch, Compressor ON/OFF Bushing, Strain Relief Nut, Harness Grounding Switch, Dispense Deck ON/OFF Circuit Board Nut, Keps # Spacer Spacer Transformer 120V Transformer 230V Screw, Pan Head #8-32 x.38" Relay 120V Relay 230V Screw, Crimptite #8 x.38" EMI Filter 230V Screw, Crimptite #8 x.38" Rectifier (Models w/ Lited Door) Nut, Keps # Transformer 120V (Models w/ Lited Door) Transformer 230V (Models w/ Lited Door) Screw, Pan Head #8-32 x.38" Resistor 230V Decal, Compressor Switch Switch, Program Decal, Program The following items are not illustrated Power Cord 120V Power Cord 230V Wiring Harness, Transformer to Circuit Board Wiring Harness, Main Wiring Harness, Main (Models with Front Mounted Refrig. Sw.) Wiring Harness, Platform Wiring Harness, Unlited Door Wiring Harness, Unlited Door (Models with Program Sw.) Wiring Harness, Lited Door (Models with Flourescent Bulbs) Wiring Harness, Lited Door (Models with LED Lighting & Portion Control) Wiring Harness, Lited Door (Models with Program Sw.) Wiring Harness, Transformer to Circuit Board (Lited Doors) Wiring Harness, Dispense Disable Wiring Harness, Dispense Disable (Models with Portion Control)

50 REFILLABLE CONTAINER ASSEMBLY JDF-4S P

51 REFILLABLE CONTAINER ASSEMBLY ITEM PART NO. QTY. DESCRIPTION Container Assy (Includes items 2 & 3) Lid O-ring

52 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO ,11, , , , , , ,41,43,45, ,7,11, ,33, ,43,45, ,7,41,43,45, ,7,9,11, ,45, ,11, ,11, ,27,33, , ,21,23, , , ,13, , ,43, , , ,45, , ,11, ,43, , , ,43, ,43, , ,23, ,23, , ,43, ,43,45, , , , , ,43, , ,43,45, , ,11, , , , , , ,

53 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO , , , ,45, ,45,47, ,45, , ,45, , ,33, , , , , ,43, M ,11,13,31,33 M ,33 M ,11,13 M